Philips TV Receiver 42PF9641D 10 User Manual

About this User Manual

This manual contains all information you will need to initially install and operate your new TV.

Also read the help texts which are being displayed at the bottom of the screen.

If this instruction manual does not give an answer or if ‘Troubleshooting’ does not solve yourTV

problem, you can call your Local Philips Customer or Service Centre. See the suppliedWorldwide

guarantee booklet.

Please, have the Model and Product number which you can find at the back or the bottom of your television

set or on the packaging, ready, before calling the Philips customer support service.

Model: 42PF9641D/10

Product No: ....................................

Contents

Safety warnings . . . . . . . . . . . . . . . . . . . . . . . 2

Getting started . . . . . . . . . . . . . . . . . . . . . . . 3

To make video and audio connections . . . . . 43

Side panel overview . . . . . . . . . . . . . . . . 44

Rear panel overview . . . . . . . . . . . . . . . 45

Connect:

Use of the remote control RC4401/01 . . . . . 5

Use of the option key . . . . . . . . . . . . . . . . . . 7

Keys at the right side of the TV . . . . . . . . . . . 7

a VCR or DVD recorder . . . . . . . . . . . . 46

twoVCRs or VCR and DVD recorder . . .47

a satellite receiver . . . . . . . . . . . . . . . . . 47

a DVD player, HD receiver/game console 48

a DVD player or HD receiver . . . . . . . . 48

a DVD player, satellite or HD receiver . .49

a PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

a Home Cinema amplifier . . . . . . . . . . . 51

Use the Common Interface slot . . . . . . . . . . 52

Select connected equipment . . . . . . . . . . . . 53

Record with your recorder . . . . . . . . . . . . . 53

Audio- and video equipment keys . . . . . . . . 54

Introduction: Digital TV . . . . . . . . . . . . . . . . . 8

Switch the TV on . . . . . . . . . . . . . . . . . . . . . . 8

First time installation . . . . . . . . . . . . . . . . . . . 9

How to navigate through the menus . . . . . . 11

Use of the TV menu settings . . . . . . . . . . . . 13

Adjust picture menu settings . . . . . . . . . 15

Adjust sound menu settings . . . . . . . . . . 18

Enjoy Ambilight . . . . . . . . . . . . . . . . . . . 20

Adjust feature menu settings . . . . . . . . . 23

Search for and store TV channels . . . . . . 27

Rearrange the channel number list . . . . . 30

Set your preferences . . . . . . . . . . . . . . . 31

Select your connections . . . . . . . . . . . . . 32

Select a decoder channel number . . . . . 32

Reset the factory settings . . . . . . . . . . . 33

How to upgrade the TV software . . . . . . 33

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . 55

Annex 1 - Philips TV software upgrade

with portable memory . . . . . . . . . . . . . . 57

Annex 2 - Philips TV-Slideshow Format

with background music . . . . . . . . . . . . . 60

Annex 3 - Philips TV - Digital camera

and USB issues . . . . . . . . . . . . . . . . . . . . 62

Annex 4 - Issues referring to connected

peripherals with a HDMI connector . . . . 63

Create your favourite list . . . . . . . . . . . . . . . 34

EPG (Electronic Programme Guide) . . . . . . . 35

Multimedia Browser . . . . . . . . . . . . . . . . . . . 37

Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Recycling . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Product information . . . . . . . . . . . . . . . . . . . 65

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting started

Before you start

Warning: do not insert the mains cord into the mains at the bottom of the TV and in a wall socket

or hang the TV on the wall before all connections are made.

Before you switch on your TV, connect all your peripheral equipment. See To make video and audio

connections, p. 43.

Overview of the rear connector panel

There is a wide range of audio and video equipment that can be connected to your TV. See To make

audio and video connections, p. 43.

AUDIO OUT

DISPLAY SYNCHRONIZED

AUDIO OUT

DIGITAL

DISPLAY SYNCHRONIZED

AUDIO

OUT

AUDIO

DIGITAL

AUDIO

OUT

AUDIO

OUT

DIGITAL

AUDIO

DIGITAL

AUDIO

HDTV

Progressive

480p, 576p, 720p, 1080i

EXT3

COMMON INTERFACE

HDMI

AUDIO in L/R

VGA

ANTENNA

EXT2

EXT1

DIGITAL

AUDIO

DIGITAL

AUDIO

HDMI

AUDIO IN L/R

PC-VGA

ANTENNA

COMMON INTERFACE

HDTV & Progressive

480p, 576p, 720p, 1080i

EXT3

COMMON INTERFACE

HDMI

AUDIO in L/R VGA

ANTENNA

EXT2

EXT1

HDMI 1

HDMI 2

AUDIO IN L/R

PC-VGA

ANTENNA

EXT2

EXT1

EXT1 can handle CVBS, RGB and Audio L/R;

EXT2 can handle CVBS, S-VIDEO, RGB,Audio L/R;

EXT3 can handleYPbPr and Audio L/R;

HDMI 1 and 2.

VGA can handleVGA, SVGA and 480p, 576p, 1080i,Audio L/R.

Supported video formats: 480i, 480p, 576i, 576p, 720p, 1080i.

Warning: disconnect all power sources before making any connections.

Tip: it is preferable to connect peripherals with RGB output to EXT1 or EXT2 as RGB provides a

better picture quality.

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting started (Continued)

Overview of the side connector panel

- To connect a camera, camcorder or game, see To make video

and audio connections, p. 44.

USB

- To connect a headphone, see To make video and audio

connections, p. 44.

- To connect a USB device, see Multimedia browser, p. 37.

Connect the antenna

Insert the aerial plug firmly into the aerial socket x at the

bottom of the TV.

Tip: for best quality use the suppressor cable supplied.

Connect the mains

Insert the mains cord supplied into the mains at the bottom

of the TV and in the wall socket.

Warning: verify that the mains supply voltage corresponds

to the voltage printed on the sticker at the rear of the TV.

UK - EIRE

Remote control

Insert the 2 batteries supplied (Type R6-1,5V).

Be sure the (+) and (-) ends of the batteries line up

correctly (inside of case is marked.)

For most keys pressing a key once will activate the function.

Pressing a second time will de-activate it.

Download from Www.Somanuals.com. All Manuals Search And Download.

Use of the remote control RC4401/01

B Standby

Press to switch the TV from or to standby mode.

When switched to standby, a red indicator on the TV lights up.

Attention: the TV is never powered off completely unless

it is physically unplugged.

TV Press to select TV mode.

DVD STB VCR AUX

Press one of these keys to set your remote control to

operate a peripheral device.

See Audio andVideo equipment keys, p. 54.

DEMO Press to switch the Demo menu on or off.

Colour keys

- When functions are attached to the colour keys, the

colour keys are shown on screen.

- To select a page in Teletext mode.

OPTION

- To open and close the Quick access menu which contains

a few frequently used options, like Picture format.

- When in teletext, press repeatedly to enlarge the teletext

page display. See Teletext, p. 41.

aTo open and close the Electronic Programme Guide.

See EPG (Electronic Programme Guide), p. 35.

Cursor keys

Press the cursor keys up/down, left/right to navigate

through the menus.

OK - To activate a setting

- Starts playing content in the Multimedia Browser

application.

BROWSE/MENU:

To open and close the main menu. See How to navigate

through the menus, p. 11.

bTeletext On/Off

Press to switch teletext on. See Teletext, p. 40.

Only for UK: Digital text/Interactive services.

Attention: not all channels transmit interactive television

applications at all times.

V Volume

Press + or - to adjust the volume.

¬ Mute key: interrupt the sound or restore it.

Download from Www.Somanuals.com. All Manuals Search And Download.

Use of the remote control RC4401/01 (Continued)

+P- Channel selection

- to browse through the TV channels and sources stored

and marked in the Favourite channels lists;

- to select a page in Teletext mode;

- to quickly browse through the lists in the menus;

- to switch the TV on from standby mode.

0/9 Digit keys

To select a TV channel between 0 and 999.

AV Select your peripherals

See Installation menu, Select your connections, p. 32.

0 Previous channel

Press to alternate between the currently viewed and the

previously viewed TV channel.

Ambilight-MODE

Ambilight: Press to switch Ambilight On or Off. For the

Ambilight settings, see Use of the TV menu settings, Enjoy

Ambilight, p. 20.

MODE: Press this key repeatedly to toggle through the

Ambilight modes.

Note: when the TV is switched to standby, and you switch

Ambilight On,Ambilight will be active. Only then less

modes are available.

Ò ‡ π † Audio andVideo equipment keys

See Audio andVideo equipment keys, p. 54.

See Multimedia browser functional keys, p. 39.

‡ CANCEL

Only for UK: Digital text/Interactive services.

Press this key to cancel those special services (and the

function bar at the bottom of the screen).

® no function

iOn screen information

Press to display (when available) information about the

selected TV channel and programme.

bDual screen

Press the b key to show teletext on the right of the

screen.

FAV To display the channels list.

You can create up to four favourite lists.

Download from Www.Somanuals.com. All Manuals Search And Download.

Use of the OPTION key

The OPTION key allows you to display the Quick access menu

which will give you direct access to some features and menu

options.

1. Press the OPTION key.

The Quick access menu appears.

2. Press the cursor up/down to select a menu item.

3. Press the OK key to jump to the selected menu item in the

TV menu. (Except for the Clock option).

4. Use the cursor keys to make a selection.

5. Press the OPTION key to exit.

Note: digital related menu items will only be accessible in case

of digital TV broadcasting.

Digital audio language:

See Adjust sound menu settings, p. 18.

Digital subtitle language:

See Adjust feature menu settings, p. 23.

Subtitles:

See Adjust feature menu settings, p. 23.

Picture format:

Quick access

Digital audio language

Digital subtitle language

Subtitles

See Use of the TV menu settings,Adjust picture menu

settings, p. 17.

Equalizer:

See Use of the TV menu settings,Adjust sound menu

settings, p. 18.

Picture format

Equalizer

Clock:

Clock

Select to activate/deactivate the clock display on the screen.

Keys at the right side of the TV

In case your remote is lost or broken, apart from

channel selection and volume adjustment, you can still

change some of the basic settings with the keys at the

side of your TV.

Press the power switch B to switch the TV on or off.

The MENU key can be used to summon the TV menu

without the remote control.

Use the VOLUME - and + keys and the

PROGRAM/CHANNEL - and + keys to select menu

items.

VOLUME

PROGRAM/CHANNEL

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction: Digital TV

Besides traditional analogue broadcasts, you can also receive

digital broadcasts via a roof or loft mounted digital antenna in

countries where those signals are available and which are

supported by this TV.Verify if the country you are now located

and you have selected during the installations (see further),

supports digital video broadcasting via antenna.

See www.philips.com/support for the list of supported countries

or consult your local dealer or see the sticker at the back of

your TV.

Note: for digital TV channels via a cable connection, you

will need an extra set top box decoder; for digital TV

channel via satellite, a satellite tuner and dish mounted

outdoors are required.Also certain internet providers

offer digital TV channels via broadband internet and a

settop box.

Switch the TV on

Press the power switch B at the side of the TV.

An indicator on the front of the TV lights up and the

screen comes on.

If the TV is in standby mode, press the -P+ keys or the B

key on the remote control.

Note: the first time (and only the first time) you switch

on your TV, you see a Welcome screen followed by the

installation procedure. See First time installation, p. 9.

First time installation

The installation procedure consists of a series of screens that

will guide you through the installation of your TV.

Follow the instructions on screen.

Note: if the TV has already been installed before and/or you

want to change the First time installation settings, proceed

with Use of the TV menu settings, p. 13.

Download from Www.Somanuals.com. All Manuals Search And Download.

First time installation (Continued)

Step 1: select your on-screen language

After the Welcome screen you are asked to select a language of

the TV's on-screen menus.The text of the header and the info

on screen continuously change language.Also the digital audio

and subtitle language will be set to the selected menu language.

1. Press the cursor up/down to highlight your language.

2. Press the OK key on the remote control.

3. Follow the instructions on screen to proceed.

Step 2: complete the initial TV installation

procedure

1. Press the green colour key on your remote control when

Television is highlighted.

2. Select the country where you are now located.

Notes:

- if you select a wrong country, the channel numbering will

not be according to the standard for your country.

- in case the country selected is not DVB-T supported by

your TV, digital related menu-items will not be

accessible.

Menu language

English

Español

Français

Hrvatski

Italiano

Magyar

.............

Please select your

language.....

3. Press the green colour key on your remote control to start

the Automatic channel installation.

PHILIPS

using cursor up and

down

All available digital TV and radio channels and analogue

TV channels are searched for and stored automatically.

This will take a few minutes.When the search is

complete, the menu will indicate the number of digital

and analogue channels found.

Notes:

- reception of digital terrestrial TV channels is applicable

dependent on the country selected;

PHILIPS Installation

- if you choose to install the channels at a later time, select

the Automatic installation in the TV menu, Installation,

Channels to scan available channels.

This will help you to install the following

sections:

Television

Settings assistant

4. Press the red colour key again when the search is

completed.

Skip

Stop

PHILIPS Television

System searching: please wait..........

Digital channels found

Analogue channels found

Stop

Download from Www.Somanuals.com. All Manuals Search And Download.

First time installation (Continued)

Step 3: Settings assistant: select your TV settings

By means of several split screens/full screens you are

prompted to select your preferred picture, sound and

ambilight settings, to finally arrive at a complete setting

which satisfies you.

PHILIPS Installation

This will help you to complete the Settings

assistant.

Television

1. Press the green colour key on your remote control to enter

the Settings assistant menu.

2. Select your Location with the cursor up/down.

Settings assistant

If you choose Shop it will skip the Settings assistant.

The TV parameters for Picture, Sound and Ambilight will

then be set to predefined fixed settings.

Skip

Stop

Press the green colour key again to proceed.

PHILIPS Settings assistant

If you choose Home it will display the Settings

Please select your location before

assistant.

continuing:

Home

3. Use the cursor left/right to each time select your preferred

screen.

4. Press the green colour key to each time confirm your

selection and to jump to the following screen.

Shop

The following items will be presented sequentially.

In the header it is mentioned how many screens have

been completed and how many screens there are in

total.

The Settings assistant will step sequentially through the

following settings: Picture, Sound and Ambilight.

5. Press the green colour key again to store all the settings

and to return to the TV installation menu.

Note: when you skip or stop the Settings Assistant, then

the standard settings Philips selected for you will be

chosen.

6. Press the red colour key again to finish the First time

installation procedure and to display the first stored TV

channel.

Note: any time you can change or reset your settings or

adjust individual settings for Picture, Sound and Ambilight

in the TV settings menu. See p. 13, Use of the TV menu

settings.

To control the settings of special TV functions, features and

accessory equipment, see p. 23, Adjust feature menu

settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to navigate through the menus

Introduction

A lot of guiding instructions, help texts and messages will be

displayed on your TV when you use the menus or when you try

to execute an action.

Read the help texts which are being displayed on the specific

item highlighted.

The colour keys at the bottom of the screen refer to the

different actions which may be executed.

Press the corresponding colour key on the remote control to

perform the required or desired action.

Note: digital related menu items will only be accessible in case

of digital TV broadcasting.

1. Press the MENU/BROWSE key on the remote control.

The main menu appears on the screen.

- TV menu allows you to access the TV menu. See

below.

- TV channels allows you to access the TV channel list

and to create up to four favourite lists with your

preferred TV channels and digital radio stations. See

Create your favourite channel list, p. 34.

- Programme guide allows you to access detailed

information about individual digital TV programmes.

According to the type of Electronic Programme Guide,

it also allows you to access the table of scheduled

Digital TV programmes and easily select and tune to a

desired programme.

See EPG, Electronic Programme Guide, p. 35.

- Multimedia allows you to access the Multimedia

browser application. It lets you display your personal

multimedia files. Multimedia is only present when a

USB device is connected.

Television

Multimedia

TV menu

TV channels

Programme guide

See Multimedia browser, p. 37.

2. Use the cursor up/down to highlight and select a menu

item.

3. Use the cursor right to enter the highlighted menu item.

The right panel shows the content of the highlighted

menu item.

TV menu

TV settings

Settings assistant

Reset to standard

Picture

TV settings

Features

Installation

Sound

Ambilight

Info

Download from Www.Somanuals.com. All Manuals Search And Download.

How to navigate through the menus (continued)

4. Use the cursor up/down to select a menu item.

TV menu

TV settings

- TV settings allows you to adjust your preferred picture,

sound and ambilight settings

- Features allows you to control the settings of special TV

features

- Installation allows you

Settings assistant

TV settings

Features

Reset to standard

Picture

Installation

Sound

- to select your language preferences;

- to search for and store your TV channels;

- to set or adjust various special functions;

- to select connected peripheral equipment;

- to define one or more channel numbers as decoder

channel numbers;

Ambilight

Info

- to reset your picture, sound and ambilight settings to the

factory standard settings;

- to upgrade your TV software

5. Press the cursor right to enter the highlighted menu item.

The content of the right panel is moved to the left panel

and the right panel now shows the content of the newly

highlighted item in the left panel.

Note: in some cases it is important that the picture can be

watched while you adjust the settings.This means that when

the highlight is on the right side panel, the other menu items

hide away.When the cursor left is pressed, the hidden menu

items reappear and the highlight moves to the left panel.

6. Press the MENU/BROWSE key to exit the main menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Use of the TV menu settings

The TV menu allows you to access and change settings and

preferences in case you want to change the First time

installation settings and/or you want to control the settings of

Television

Multimedia

TV menu

TV channels

Programme guide

special TV functions, features and peripheral equipment.

Adjust viewing and listening settings

TV menu

TV settings

Settings assistant

Reset to standard

Picture

1. Press the MENU/BROWSE key on the remote control.

TV settings

Features

The main menu appears on the screen.

2. Select TV menu and press the cursor right.

The TV menu is displayed.

3. Select TV settings and press the cursor right.

The TV settings menu is moved to the left.

Installation

Sound

Ambilight

4. Press the MENU/BROWSE key to exit the menu.

To make it easier to change the settings of the TV, there are

3 ways of doing it.

Info

A. Change settings in an easy-to-use manner with the

Settings assistant

Each time you've made a selection, press the green key to

confirm your selection.

1. Select Settings assistant and press the cursor right.

By means of several split screens/full screens you are

prompted to select your preferred picture, sound and

ambilight settings to finally arrive at a complete setting

which satisfies you.

See First time installation, Step 3: Settings assistant:

select your TV settings, p. 10.

2. Press the green colour key to return to the TV menu again.

Download from Www.Somanuals.com. All Manuals Search And Download.

Use of the TV menu settings (continued)

B. Use of the Standard settings (if present)

This allows you to reset your settings for viewing and

listening to predefined factory settings.

TV menu

TV settings

Reset to standard

1. Select Reset to standard and press the cursor right.

Current

Settings assistant

Reset to standard

Picture

A menu appears which allows you to select one of the

standard settings for viewing and listening.

Current shows your current settings for viewing and

listening.

If you select Natural, it allows you to set your picture,

sound and ambilight settings to the recommended

standard values. In most cases this will give the best

balanced viewing experience.

Natural

Vivid

Subtle

Sound

Ambilight

Info

If you select Vivid, it allows you to set your picture,

sound and ambilight settings to rich values, making use

of the TV capabilities to its full extend.

If you select Subtle, it allows you to set your picture,

sound and ambilight settings to the purest

representation of the original source content.

2. Press the green colour key to store the selected setting.

C. Individual settings for picture, sound and ambilight

Select Picture, Sound or Ambilight and press the cursor

right.

A menu appears which allows you to fine tune the

picture, sound and ambilight settings.

To adjust the Picture settings, see Adjust picture menu

settings, p. 15.

To adjust the Sound settings, see Adjust sound menu

settings, p. 18.

To adjust the Ambilight settings, see Enjoy Ambilight,

p. 20.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjust picture menu settings

The picture menu contains the settings that affect the quality of

the picture.

TV menu

TV settings

Settings assistant

Reset to standard

Picture

TV settings

Features

1. Press the MENU/BROWSE key on the remote control.

The main menu appears.

2. Select TV menu and press the cursor right.

The TV menu is moved to the left.

3. Select TV settings and press the cursor right.

The TV settings menu is moved to the left panel.

4. Select Picture and press the cursor right.

The Picture menu is moved to the left panel.

Installation

Sound

Ambilight

Info

5. Use the cursor up/down to select the Picture menu items.

6. Press the cursor right to enter the selected Picture menu

item.

Note: all digital related menu items will only be accessible

in case of digital TV broadcasting.

TV menu

TV settings

Picture

Contrast

Brightness

Colour

Settings assistant

Reset to standard

Picture

7. Use the cursor keys to adjust the settings.

8. Press the cursor left to return to the Picture menu.

Hue

Sound

Contrast

Sharpness

Tint

Ambilight

Adjusts the intensity of bright parts in the picture but keep

the dark parts unchanged.

..............

Brightness

Info

Adjusts the light output of the complete picture, which will

mainly affect the darker areas of the picture.

Colour

Adjusts the saturation level of the colours to suit your

personal preference.

Hue

Compensates for the colour variations in NTSC encoded

transmissions.

Sharpness

Adjusts the sharpness of fine details in the picture.

Tint

Increases or decreases Warm (red) and Cool (blue)

colours to suit personal preferences.

Select Cool to give the white colours a blue, Normal to

give the white colours a neutral, Warm to give the white

colours a red tint.

Select Custom to make a customised setting in the

Custom tint menu item.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjust picture menu settings (Continued)

Custom tint (only when Tint is set to Custom)

TV menu

Fine tunes the white point (WP) and black level (BL) of

the picture.

TV settings

Picture

.............

Settings assistant

Reset to standard

Picture

Custom tint

1. Select Custom tint and press the cursor right.

2. Use the cursor keys to select and adjust the settings of:

Pixel Plus

Digital Natural Mo..

Dynamic contrast

DNR

R-WP: allows you to customise the colour tint by

adjusting the red whitepoint of the picture.

G-WP: allows you to customise the colour tint by

adjusting the green whitepoint of the picture.

B-WP: allows you to customise the colour tint by

adjusting the blue whitepoint of the picture.

Sound

Ambilight

.............

Info

R-BL: allows you to customise the colour tint by

adjusting the red blacklevel of the picture.

G-BL: allows you to customise the colour tint by

adjusting the green blacklevel of the picture.

3. Use the colour keys to reset to the predefined settings.

4. Press the cursor left to return to the Picture menu.

Pixel Plus

Pixel Plus is the most ideal setting, as it fully processes

the image to make every single pixel the best it can be,

improving contrast, sharpness, picture depth, and colour

reproduction and brilliance from every source, including

High Definition.

Select On or Off to activate/de-activate Pixel Plus.

Digital Natural Motion

Reduces the field and line flicker and reproduces smooth

movement especially in movies.

Select Off, Minimum or Maximum in order to really

see the difference in picture quality.

Dynamic contrast

Automatically makes the contrast in the darker and the

brighter picture areas more noticeable as the image on

the screen changes.

Normally select Medium. It may be preferred to select

Minimum, Maximum or Off.

DNR

DNR automatically filters out and reduces the image

noise.This improves picture quality when receiving weak

signals.

Select Off, Minimum, Medium or Maximum according

to the image noise in the picture.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjust picture menu settings (Continued)

MPEG artefact reduction

TV menu

MPEG artefact reduction On smoothens the

transitions on digital content.

Select On or Off.

TV settings

Picture

.............

Settings assistant

Reset to standard

Picture

DNR

MPEG artefact red.

Colour enhancem..

Active control

Light sensor

Colour enhancement

Automatically controls green enhancement and blue

stretch. It makes the colours more vivid.

Select Off, Minimum, Medium or Maximum.

Sound

Ambilight

Picture format

Active control

The TV continuously measures and corrects all incoming

signals in order to provide the best picture possible.

Select On or Off to activate/de-activate Active control.

Info

Light sensor

Light sensor On automatically adjusts the picture and

ambilight settings for best viewing dependent on the

lighting conditions in the room.

Select On or Off.

Picture format

This allows you to adjust the size of the picture dependant

on the broadcasted format and your preferred setting.

Tip: this function is also accessible via the OPTION key on

the remote control.

How to navigate through the TV settings menu, see p. 12:

Use of the TV menu settings.

Auto format

Super zoom

Choose among the following picture formats:Auto format,

Super zoom, 4;3, Movie Expand 14:9, Movie Expand 16:9 or

Wide screen.

4:3

Movie expand 14:9

Auto format makes the picture fill the screen as much as

possible.

In case of subtitles in the bottom black bar,Auto format

makes the subtitles visible.

In case of a broadcaster logo in the corner of the top black

bar, the logo disappears from the screen.

Super zoom removes the black bars on the sides of 4:3

programmes with minimal distortion.

Movie expand 16:9 Wide screen

When in Movie Expand 14:9, Movie Expand 16:9 or Super

zoom screen format, you can make subtitles visible with the

cursor up/down.

Note: with HD sources not all picture formats will be

available.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjust sound menu settings

The sound menu contains the settings that affect the quality of

the sound.

TV menu

TV settings

Sound

Equalizer

Volume

Settings assistant

Reset to standard

Picture

1. Press the MENU/BROWSE key on the remote control.

The main menu appears.

2. Select TV menu and press the cursor right.

The TV Menu is moved to the left.

3. Select TV settings and press the cursor right.

The TV settings menu is moved to the left panel.

4. Select Sound and press the cursor right.

The Sound menu is moved to the left panel.

Balance

Digital audio lang..

Dual I/II

Sound

Ambilight

Mono/Stereo

.............

5. Use the cursor up/down to select the Sound menu items.

6. Press the cursor right to enter the selected Sound menu

item.

Info

Note: dependent on the input signal, one or more menu

items may not be selectable.

Manufactured under license from Dolby

Laboratories.‘Dolby’ ‘Pro Logic’ and the

double-D symbol are trademarks of Dolby

Laboratories.

7. Use the cursor keys to adjust the settings.

8. Press the cursor left to return to the Sound menu.

Equalizer

Allows you to change the frequency response of the sound

to match your personal taste.

Tip: this function is also accessible via the OPTION key on

the remote control.

Volume

Allows you to adjust the sound output level.

Balance

Allows you to adjust the output of the right and left

speakers to obtain the best stereo reproduction for your

listening position.

Digital audio language (only with Digital TV broadcasting)

Allows you to select an audio language out of the list of the

available broadcasted languages for the current digital

programme.

Note: if there is more than one variant for an audio

language, then select one of the variants.

To permanently change the audio language, use the

Language menu in the Installation menu.

Tip: this function is also accessible via the OPTION key on

the remote control.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjust sound menu settings (Continued)

Dual I/II

TV menu

Allows you to select, per channel, Dual I or II, when dual

sound transmission is available.

TV settings

Sound

.............

Settings assistant

Reset to standard

Picture

Mono/Stereo

Surround mode

Headphone volume

AVL

Mono/Stereo

Allows you to select, per TV channel, Mono or Stereo

sound when stereo broadcasts are available.

Sound

Ambilight

Surround mode

Delta volume

Auto surround

Allows you to select the modes for more spatial or

surround sound reproduction dependent on the

Info

broadcasted signals or signals from external inputs received.

Headphone volume

Allows you to control the level of sound through the

headphones.

AVL (AutomaticVolume Leveler)

Automatically reduces the volume differences between

channels and programmes, providing a more constant overall

level.This will also reduce the dynamics of sound.

Delta volume

Allows you to correct for any permanent volume differences

between TV channels or external sources.

Auto surround

When switched On, this allows the TV to automatically

switch to the best surround sound mode the broadcaster

transmits.

Download from Www.Somanuals.com. All Manuals Search And Download.

Enjoy Ambilight

The ambilight menu contains the settings for controlling the

ambient lighting. Using ambient light gives a more relaxed

viewing experience and improves perceived picture quality.

Analysis of the picture content adapts the colours continuously.

But the lights can also be set to any fixed colour and many

shades of white.

TV menu

TV settings

Ambilight

Brightness

Mode

Settings assistant

Reset to standard

Picture

Colour

Sound

Tip: in standby mode the lights can be set/operated to any

colour and create a unique ambiance in the room. See

Ambilight in standby mode, p. 22.

Custom colour

Separation

.............

Ambilight

Info

1. Press the MENU/BROWSE key on the remote control.

The main menu appears.

2. Select TV menu and press the cursor right.

The TV Menu is moved to the left.

3. Select TV settings and press the cursor right.

The TV settings menu is moved to the left panel.

4. Select Ambilight and press the cursor right.

The Ambilight menu is moved to the left panel.

5. Use the cursor up/down to select the Ambilight menu

items.

6. Press the cursor right to enter the selected Ambilight menu

item.

7. Use the cursor keys to adjust the settings.

8. Press the cursor left to return to the Ambilight menu.

Ambilight

Allows you to switch the lights On or Off at the rear of the

TV.

Select Off to switch off the ambient lights and downlight all

other ambilight menu items.

Select On to switch on the ambient lights. Refine the light

settings in the menus below.

Brightness

Allows you to adjust the light output of the ambilights.

Download from Www.Somanuals.com. All Manuals Search And Download.

Enjoy Ambilight (Continued)

Mode

Allows you to choose for constant background lighting or

for background lighting that matches the images displayed

on the screen.

TV menu

TV settings

Ambilight

.............

Settings assistant

Reset to standard

Picture

Mode

Use the cursor keys to select Colour, Relaxed, Moderate or

Dynamic.

- Colour: this will show constant light according to the

settings in the Colour menu below. It allows manual fine

tuning in the next Ambilight menu items.

- The options Relaxed, Moderate or Dynamic will

dynamically match brightness and colour to the screen

content.The selection made will effect the speed which

determines the viewing impression.

Colour

Custom colour

Separation

Balance

Sound

Ambilight

Info

For example:

- in Relaxed mode, the rate of brightness and colour

change, as predefined in the factory, is smoothly and soft

which gives you an immersive yet relaxed viewing.

- in Moderate mode the rate of brightness and colour

change can be experienced as between Relaxed and

Dynamic.

- in Dynamic mode the rate of brightness and colour

change is more quick and dynamic.This gives you full

immersion and involvement with the screen content.

Notes:

- the rate of change is limited, as not to cause

uncomfortable sensations;

- according to the selection made, some Ambilight menu

items will be downlighted and can not be selected.

Colour

Note: only available when Colour has been selected in the

Mode menu above.

Allows you to select or adjust the colour of the light to

your own personal choice.

- Warm white is matched to that of most normal

lightbulbs. Select this setting if you want the Ambilight to

fit best with normal living room lighting.

- Cool white is matched to that of normal daylight

(6500K). Select this setting if you prefer more cool lighting.

Note: the 6500K is the SMPTE recommended setting for

ambient backlighting of displays.

- Blue: preferred by most consumers to create a cool,

modern and/or mystical atmosphere. Select this setting

according to your personal taste or mood.

- Red: preferred by most consumers to create a cosy,

special atmosphere. Select according to your personal

taste or mood.

- Custom: select if you want to customise the ambilight

colour.

Download from Www.Somanuals.com. All Manuals Search And Download.

Enjoy Ambilight (Continued)

Custom colour

TV menu

TV settings

Note: only available when Custom has been selected in

the Colour menu.

Ambilight

.............

Settings assistant

Reset to standard

Picture

Mode

Allows you to customise the ambilight colour.

Select Palette to select the general colour of the light

output.

Colour

Custom colour

Separation

Balance

Sound

Select Saturation to adjust the colourfulness of the light.

Ambilight

Separation

Allows you to define the stereo effect in case, Relaxed,

Moderate or Dynamic has been selected in the Mode menu.

Select Off for a mono behaviour which means that all lamps

will behave equally.

Select Minimum, Medium or Maximum to define the

Ambilight stereo effect spread over the available lamps.

Info

Balance

Allows you to adjust the colour and level of light intensity

on the left and right side of the picture.

Ambilight in standby mode

When the TV is switched off, the ambient lights will also be

switched off.When the TV is in standby mode, ambilight can

be used to provide a unique ambience for the room.

Press the Ambilight key on the remote control to switch

between Ambilight On or Off. See Use of the remote

control, p. 6.

Press the MODE key repeatedly to toggle through the

Ambilight modes.

Note: when the TV is switched to standby, and you switch

Ambilight On, then less Ambilight modes are available.

Caution: Infrared interference

To avoid bad infrared remote control reception, place your

peripheral equipment out of sight of the ambient lights of

your TV. Ambilight does not function well when the room

temperature is less than 59°F/15°C.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjust feature menu settings

The Features menu allows you to control the settings of

special TV functions, features and accessory equipments.

TV menu

Features

1. Press the MENU/BROWSE key on the remote control.

TV settings

Features

Subtitle

The main menu appears.

2. Select TV menu and press the cursor right.

The TV Menu is moved to the left.

3. Select Features and press the cursor right.

The Features menu is moved to the left panel.

Digital subtitle lan..

Sleeptimer

Childlock

Installation

Set/Change code

On timer

4. Use the cursor up/down to select the Features menu

items.

5. Press the cursor right to enter the selected Features

menu item.

.............

Info

6. Use the cursor keys to adjust the settings.

7. Press the cursor left to return to the Features menu.

Subtitle

This displays Teletext and DVB-T subtitles from the

selected TV channel.These can be permanently displayed,

or only when mute is active.The teletext subtitle page of

analogue channels must be stored for each TV channel.

1. Switch on teletext and select the proper subtitle page

from the index.

2. Switch off teletext.

3. Select

- Subtitle On to display the subtitles on the selected TV

channels.

- On during mute to automatically display the subtitles

only when the sound has been muted with the ¬ key

on the remote control.

Tip: this function is also accessible via the OPTION key on

the remote control.

Digital subtitle language (only with Digital TV broadcasting)

This allows you to (temporarily) select your preferred

subtitle language out of the list of the broadcasted languages

for the current programme.

Note: to permanently change the subtitle languages, use

the Language menu in the Installation menu.

Use the cursor up/down to temporarily overrule your

permanent language selection and confirm with the OK key.

Tip: this function is also accessible via the OPTION key on

the remote control.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjust feature menu settings (Continued)

Sleeptimer

TV menu

Features

This sets a time period after which the TV automatically

switches to standby.

1. Select Sleeptimer.

2. Press the cursor right.

TV settings

Features

.............

Sleeptimer

Childlock

Installation

3. Select a value with the cursor up/down.

Set/Change code

On timer

The list will have values from 0 to 180 minutes.When 0

is selected, the sleeptimer is switched off.

Common interface

Demo

Note: you can always switch off your TV earlier or select

another time set.

Info

Childlock

With a 4-digit code, you are able to lock TV channels and

external sources to prevent children from watching certain

programmes.

1. Select Childlock.

2. Press the cursor right to enter the Childlock menu.

3. Enter your 4-digit code.

Note: you have to re-enter your code each time you

enter the Childlock menu.

4. Select one of the menu items of the Childlock menu and

press the cursor right:

- Lock to lock all channels and externals:

- Custom lock to lock a certain programme or to lock all

the channels from a certain time.

< Select:

- Lock after to lock all programmes from a certain time

onwards.

< Press the cursor right twice.

< Select On to set the lock.

< Press the cursor left.

< Select Time and press the cursor right.

< Enter the time with the cursor up/down and right.

- Channel lock to lock a certain TV channel or external.

< Press the OK key to activate/deactivate.

- Parental rating to set an age rating to a digital

programme if the programme is parental rated.The

ratings applied are according the selected country in the

initial installation.

< Press the cursor right and select an age rating with the

cursor up/down.

- Select Unlock to disable all locks you have set.

Important: you have forgotten your code !

1. Select Change code and press the cursor right.

2. Enter the overriding code 8-8-8-8.

3. Enter a new personal 4-digit code.

4. Confirm your new entered code.

The previous code is erased and the new code is stored.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjust feature menu settings (Continued)

Set code/Change code

TV menu

Features

This allows you to set or change the personal 4-digit access

code that is used in the different lock functions of the TV.

TV settings

Features

.............

Sleeptimer

Childlock

Installation

Select Set or Change code.

If no PIN-code exists yet, the menu item is set to Set

code. Follow the instructions on screen.

If a PIN-code has previously been entered, the menu

item is set to Change code. Follow the instructions on

screen.

Set/Change code

On timer

Common interface

Demo

Enter your code with the digit keys.All number

combinations from 0000 to 9999 are valid numbers.

Info

The Features menu reappears with a message confirming

that your PIN-code has been created or changed.

On timer

From standby, this automatically switches the TV to the

specified channel number, at a specified time.

1. Select On timer.

2. Press the cursor right to enter the On timer menu.

3. Select Timer and press the cursor right.

4. Select On.

5. Select Channel and then the TV channel you want your TV

to switch to on a selected time and day

6. Select Day and then a day of the week or select Daily.

7. Select Time and enter the time with the digit keys or with

the cursor up/down.

8. Press the OK key to activate.

9. Press the cursor left to return to the Features menu or

press the MENU/BROWSE key to switch off the menu.

Note: From now on, every week, your TV will

automatically switch to the selected channel, on the

selected day, at the selected time, until the On timer

function is switched off again.

Note: only one On timer can be set.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjust feature menu settings (Continued)

Common interface

TV menu

Features

Note: this functionality is only available in certain countries.

TV settings

Features

.............

Sleeptimer

Childlock

This allows you to access common interface applications

defined by the service provider of the Common Interface

(CI) module.

The Common Interface (CI) module can contain one or

more applications, which are used to communicate with the

CI service provider and provide some additional facilities to

the user.

Installation

Set/Change code

On timer

Common interface

Demo

See Use the Common Interface slot, p. 52.

Info

Note: this menu item and the common interface

applications are only selectable when an authenticated

Common Interface card is present and some Common

Interface card user interface sessions are listed.

The CI service provider is responsible for the messages

and texts on screen. In case of failure or strange behaviour,

you must call your CI service provider.

TV menu

Features

Demo

Pixel Plus

Subtitle

This allows you to get an idea of the features that are part

of the television.

Ambilight

Dig. subtitle langu.

Sleeptimer

Settings assistant

Active control

1. Select Demo.

Childlock

2. Press the cursor right.

3. Select a desired demo.

4. Press the OK key to start the demo.

The selected demo is played once.

5. Press the red colour key to stop the demo and to return to

Set/Change code

On timer

Common interface

Demo

the demo menu.

6. Press the red colour key to exit the demo menu.

Info

Download from Www.Somanuals.com. All Manuals Search And Download.

How to search for and store TV channels

Tip: you will need this chapter only if you want to change the installation settings.

Installation menu

This menu will adjust settings related to the installation of the

TV channels, language and country and to the initial installation

of your TV.

Television

TV menu

TV channels

Programme guide

Multimedia

TV menu

1. Press the MENU/BROWSE key on the remote control.

The main menu appears.

2. Select TV menu and press the cursor right.

The TV Menu is moved to the left.

3. Select Installation and press the cursor right.

The Installation menu is moved to the left panel.

Installation

TV settings

Features

Languages

Country

4. Use the cursor up/down to select the Installation menu

Installation

Time zone

Channels

Preferences

Connections

.............

items.

5. Press the cursor right to enter the selected Installation

menu item.

6. Use the cursor keys to make a selection.

7. Press the OK key to activate or to confirm.

8. Press the cursor left to return to the Installation menu or

press the MENU/BROWSE key to switch off the menu.

Info

Select your language preferences

This menu allows you to select your preferred language for

menu, audio and subtitle.

TV menu

Installation

Languages

Menu language

Preferred audio l...

Preferred subtitle...

Hearing impaired

Languages

Country

This allows you to select your menu language out of the list

of the available languages.

Time zone

Channels

Preferences

Connections

Decoder

Preferred audio language (only with Digital TV broadcasting)

This allows you to select your audio language preference in

case several languages are broadcasted.

Preferred subtitle language (only with Digital TV broadcasting)

.............

This allows you to select your subtitle language preference

in case several languages are broadcasted.

Info

Hearing impaired (only with Digital TV broadcasting)

This allows you to select the hearing impaired audio or

subtitle language.

When set to On, the Hearing impaired version of your

preferred audio or subtitle language will, if available, be

reproduced.

When set to Off, the normal audio and subtitle language

behaviour will be applicable.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to search for and store TV channels (Continued)

Select your country

TV menu

Installation

TV settings

Features

Languages

Country

This allows you to select the country where you are now

located.

Installation

Time zone

Channels

Preferences

Connections

............

Notes:

- if you select a wrong country, the channel numbering will not

be according to the standard for your country;

- in case the country selected is not DVB-T supported by your

TV, digital related menu-items will not be accessible.

Info

(only with Digital TV broadcasting)

Select the time zone

Only applicable for certain countries and dependent on the

selected country.

This allows you to select your local time zone so that the clock

display shows the correct time.

Store TV and radio channels

After language and country are set correctly, you can now

search for and store the TV channels.

TV menu

Select Channels in the TV, Installation menu.

Installation

Channels

Automatic installation

Autom. installation

Installation update

Digital: test recept..

Analogue: manual..

Rearrange

Languages

Country

The TV will scan the entire frequency spectrum based on

the selected country.

Time zone

Channels

Preferences

Connections

Decoder

All available digital and analogue TV and digital radio

channels are searched for and stored automatically.

This will take a few minutes.

When the search is complete, the menu will indicate the

number of digital and analogue channels found.

.............

Installation update

This allows you to automatically tune to and update all

available channels.

Info

Notes:

- this will not reinstall uninstalled channels;

- new channels found will not be added to any favourite

list;

- already installed channels will not be renumbered.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to search for and store TV channels (Continued)

Digital: test reception (only with Digital TV broadcasting)

TV menu

This allows you to see the quality and the strength of the

signal reception for a digital frequency.This enables you to

find the antenna position that gives the best reception.

Installation

Channels

Autom. installation

Installation update

Digital: test recept..

Analogue: manual..

Rearrange

Languages

Country

Select Digital: test reception and press the cursor right.

Time zone

Channels

Preferences

Connections

Decoder

You obtain an indication of the actual channel frequency,

the network name, the signal quality and strength.

If the signal quality and strength is poor, you can try

repositioning the aerial.

.............

Tip: it is however advisable to contact a specialised aerial

installer in order to achieve the best results.

You can also directly enter the frequency of the digital

channels you want to test.

Info

Analogue: manual installation

This gives you the possibility to manually install (tuning-in

channel by channel) analogue channels. Manual installation

will not find nor store any DVB-T (digital) channels.

TV menu/Installation

Channels

Analogue: manual..

System

Automatic install...

Installation update

Digital: test recept.

Analogue: manual..

Rearrange

1. Select Analogue: manual installation and press the

cursor right.

2. Select System.

3. Select your country or part of the world where you are

now located.

Fine tune

Store current chan.

Store as new chan.

4. Select Search and press the cursor right.

5. Select the red or green colour key to proceed.

Tip: if you know the frequency, enter the 3 digits of the

frequency with the digit keys 0 to 9 (For example, 049).

Info

6. Press the cursor left to store the channel found or to

search for another channel.

7. Select Fine tune and press the cursor right.

Fine tuning can be useful when the frequency has shifted a

bit or when interference of another frequency occurs.

Adjust the frequency with the cursor up/down in case of

poor reception of the channel found.

8. Select Store current channel if you want to store the

(fine tuned) frequency under the current channel number.

Press the cursor right and confirm with the OK key.

Select Store as new channel if you want to store the

(fine tuned) frequency under a new channel number.

Press the cursor right and confirm with the OK key.

9. Use the rearrange menu to rename or reshuffle the

channels. See next page.

Note: when on a frequency where a DVB signal is

broadcasted, the tuner will try to decode an analogue TV

channel, and hence will not show video.

Download from Www.Somanuals.com. All Manuals Search And Download.

Rearrange the channel number list

This allows you to rename, to reshuffle and to uninstall or

reinstall the stored channels.

Press the corresponding colour keys and follow the on

screen instructions.

TV menu

Installation

Channels

Autom. installation

Installation update

Digital: test recept..

Analogue: manual..

Rearrange

Languages

Country

Reshuffle

Time zone

Channels

Preferences

Connections

Decoder

This allows you to change the order of the stored TV

channels.

1. Select the channel you want to change place.

2. Press the yellow colour key to move up a single position in

the list.

3. Press the blue colour key to move down a single position in

the list.

4. Repeat to reshuffle other TV channels.

.............

Info

TV menu/Installation

Channels

Rename

Rearrange

This allows you to change the name stored in the memory

or to assign a name to a channel or external for which a

name has not yet been entered.

Automatic instal...

Installation update

Digital: test rec....

Analogue: manual

Rearrange

1. Select the channel you want to rename.

2. Press the red colour key on your remote control.

3. Select the characters with the cursor up/down. Select the

following position with the cursor right.

4. Press the green colour key or the OK key when finished.

Notes:

- press the yellow colour key to delete all characters.The

cursor is positioned at the beginning again;

- press the blue colour key to delete the character the

cursor is positioned. Enter a new character with the

cursor up/down;

- a name can be given to the channel numbers 0 to 999;

- space, numbers and other special characters are located

between Z and A.

Info

Rearrange

5. Select another channel number and repeat steps 2 to 5.

Uninstall - reinstall

This allows you to uninstall a stored channel so that it is no

longer possible to tune to.This also allows you to reinstall

an earlier uninstalled channel.

Rename

Uninstall Move

Move

down

1. Select the channel you want to uninstall.

2. Press the green colour key to uninstall the selected channel.

The uninstalled channel is indicated in the list by an icon

in front of the uninstalled channel.

3. Press the green colour key again to reinstall the uninstalled

channel.

Note: uninstalled channels are not reinstalled during an

installation update.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set your preferences

This menu contains items that can set or adjust various special

TV functions and that will typically be accessed only

occasionally.

TV menu

Installation

Preferences

Location

.............

Teletext 2.5

OSD

Time zone

Select your location

Channels

This allows you to select the location of your TV.

If you choose for Shop it will result in fixed settings of

picture, sound and ambilight.

The location Home will give full flexibility to change any

predefined settings for picture, sound and ambilight.

Programme title

Preferences

Connections

Decoder

Factory settings

Software upgrade

Info

SelectTeletext 2.5

Some broadcasters offer the opportunity to see more

colours, other background colours and nicer pictures in the

teletext pages.

Select Teletext 2.5 On to take advantage of this feature.

Select Teletext 2.5 Off if you like the more neutral

teletext layout.

The selection made is valid for all the channels which

broadcast Teletext 2.5.

Note: it may take a few seconds before teletext broadcast

switches over to Teletext 2.5.

Select the On Screen Display (OSD)

This allows you to select the display of the volume bar and

a reduced or extended on screen display of programme and

channel information.

Select Minimum to activate the display of reduced channel

information.

Select Normal to activate the display of extended channel

and programme information. For example, information on

the programme, input signal quality of connected peripheral

equipment, the screen format and sound mode, selected

audio language, subtitle language, ratings, remaining time of

the sleeptimer setting,...

Display a Programme title

This allows you, to display the programme title according to

the transmitted information.

When selected Yes, after the selection of a TV

programme or after you press the i key on the

remote control, a programme title will be displayed if

transmitted.

Download from Www.Somanuals.com. All Manuals Search And Download.

Select your connections

This allows you to select the peripheral equipment you have

connected to the audio and video connectors.

TV menu

Installation

Connections

EXT1

.............

1. Select Connections.

Time zone

Channels

EXT2

2. Press the cursor right.

3. Select the input to which the peripheral equipment is

connected.

EXT3

Preferences

Connections

Decoder

HDMI 1

HDMI 2

VGA

When you select EXT1, EXT2, EXT3, HDMI 1,

HDMI 2, VGA, Side, AUDIO IN L/R or DIGITAL

AUDIO IN, a list appears which allows you to identify

which type of peripheral equipment is attached to this

input.

Factory reset

Side

Software upgrade AUDIO IN L/R

DIGITAL AUDIO IN

4. Press the cursor right again to enter the list of types of

peripherals connected to the selected input.

5. Select the peripheral equipment with the cursor up/down.

Info

Digital Audio In

If a peripheral equipment has a digital audio output, you can

connect this with a single cable to the TV’s DIGITAL

AUDIO IN connector.

In the Connections menu, assign the DIGITAL AUDIO IN

to the corresponding external input to which your

peripheral equipment is connected.

In addition to accepting audio input via Digital Audio In, the

TV can output encoded Dolby Digital audio via the

DIGITAL AUDIO OUT connector to an external amplifier

or receiver. If your amplifier or receiver has a matching

connector for Digital Audio In, you can connect it with a

single cable to the TV's DIGITAL AUDIO OUT.

See To make video and audio connections, Connect a Home

Cinema amplifier, p. 51.

Select a Decoder channel number

This allows you to define one or more channel numbers as

decoder channel numbers when a decoder or a descrambler is

connected to EXT1 or EXT2.

TV menu

Installation

Decoder

Channel

Status

.............

Time zone

1. Select the channel number under which you have stored the

programme that comes from your decoder or descrambler.

2. Select Status.

3. Select the input used to connect your decoder: None,

EXT1 or EXT2.

Channels

Preferences

Connections

Decoder

Select None if you do not want the selected channel

Factory settings

Software upgrade

number being activated as a decoder channel number.

Info

Download from Www.Somanuals.com. All Manuals Search And Download.

Reset the Factory settings

TV menu

This allows you to reset most of the predefined factory states.

Installation

Factory settings

Reset

1. Select and press the cursor right.

2. Press the OK key to erase settings and reset them to their

default values.

.............

Time zone

Channels

Preferences

Connections

Decoder

Factory settings

Software upgrade

Info

How to upgrade the TV software

This allows you to upgrade your TV software using a USB device.

TV menu

Installation

Software upgrade

Current softw. info

Local upgrades

Announcement

USB device upgrade

.............

It is possible to initiate an upgrade procedure from a USB

device before you start up the TV.The memory device must

be filled with the appropriate upgrade image (and structure)

which can be found on the www. philips.com/support website.

How to upload a new software version on your memory

device, see Annex 1, Philips TV software upgrade with portable

memory, p. 57.

Time zone

Channels

Preferences

Connections

Decoder

Factory settings

Software upgrade

Automatic software announcement (if present)

When you switch on your TV a message may appear that a

new software upgrade is available.

Info

Press the red colour key on your remote control if you want

to be reminded later on.

Press the green colour key on your remote control to

confirm you have read the message.

Once you have confirmed, the message will not pop up

again.

If however, you want to see the last broadcasted

announcement again, select Announcement in the

Software upgrade menu.

Note: as long as the software upgrade has not been

executed, the message will be available.

Download from Www.Somanuals.com. All Manuals Search And Download.

Create your favourite list

This allows you to select up to four favourite channels lists with

your preferred TV channels and radio stations. For example, each

member of your family can create his/her own favourite list.

In addition to the favourite channel lists you may also select a list

with only digital TV channels or a list with only the radio

channels or a list with only the analogue channels.

Note: when this key is pressed the first time after you have

finished the installation, it will bring up the full channel list. In

other situations it will bring up the last selected channel list.

To select a channel from the displayed favourite list

1. Press the FAV key (or the OK key).

All channels

The last selected channel list appears.

EXT1

EXT2

HDMI

2. Use the cursor up/down to select a channel.

3. Press the OK key to display the selected channel.

1 Analogue channel 1

2 Digital channel 1

3 Digital channel 2

4 Radio channel 1

5 Data channel 1

To select another favourite channel list

Change list

1. Press the FAV key.

Tune to a channel by pressing OK.

Use -P+ for page up/down.

The last selected channel list appears.

2. Press the red colour key to bring up the list of possible

favourite channel lists.

3. Use the cursor up/down to select a list.

4. Press the OK key.

5. Press the FAV key again to exit.

All channels

All

TV channels

Radio channels

Analogue

Favourites 1

Favourites 2

Favourites 3

Favourites 4

To create a favourite list or to modify the list

1. Press the FAV key.

Change list

The last selected channel list appears.

Use cursor up/down to select and

OK to confirm.

2. Press the red colour key.

A list with all possible favourite channel lists appears.

3. Use the cursor up/down to select a Favourites (1 to 4)

channel list.

4. Press the OK key.

Favourites 1

EXT1

EXT2

5. Press the green colour key to enter the Edit mode.

HDMI

The selected Favourite list will bring up a full channel list.

1 Analogue channel 1

6. Use the cursor up/down to select a channel.

7. Press the OK key to check or uncheck the highlighted

channel and to add it to or remove it from your selected

favourite list.

2 Digital channel 1

3 Digital channel 2

4 Radio channel 1

5 Data channel 1

8a. < Press the green colour key again to leave the Edit mode.

Exit

Leave edit

The modified favourite channel list appears.

Press the OK key to mark /

unmark.

< Press the FAV key again to exit.

With the –P+ key you will be able to browse through

the TV channels of the selected list.

8b. Press the red colour key to remove the channel list.

Note: with the digit keys you can still select channels which

are not marked as favourite.

Download from Www.Somanuals.com. All Manuals Search And Download.

Create your favourite channels list (Continued)

To select only TV or only radio channels on the All

channels list

When the All channels list is displayed or selected you may filter

the list and select a list with only the TV channels or a list with

only the radio channels.

1. Press the FAV key.

The last selected channel list appears.

2. Press the cursor left.

3. Select the All channels list and press the cursor right.

4. Press the red colour key to filter.

5. Select your desired channels list.

6. Press the FAV key again to exit.

With the –P+ key you will be able to browse through

the TV channels of the filtered list.

Note: the filtering will not be remembered after the TV is

switched off or set to standby.

(only with Digital TV channels)

EPG (Electronic Programme Guide)

The Electronic Programme Guide shows you detailed

information about the current programme and also about the

next programme (only for TV programmes that provide EPG

information).

Note: these instructions may differ according to the type of

Electronic Programme Guide.

1. Press the a key.

The EPG screen appears. Dependent on conditions it

may take some time to acquire EPG data.

The EPG screen updates automatically if the EPG data is

acquired successfully. If not, the EPG screen remains

blank.

Information about the selected programme appears.

Use the coloured keys to activate the available EPG features

displayed at the bottom of the screen.

2. To quit the Programme Guide page, press the a key again.

When the type of Electronic Programme Guide

available, displays a list ofTV programmes:

1. Use the cursor up/down to select a desired TV programme.

Information about the selected programme appears.

Tips:

- press the blue colour key on the remote control to view

more information (not currently displayed) about the

selected programme.

- to quit the display of detailed information, press the blue

colour key again.

Download from Www.Somanuals.com. All Manuals Search And Download.

EPG (Electronic Programme Guide) (Continued)

2. Press the green colour key on the remote control to

watch/listen to the selected programme currently on air.

3. Press the red colour key to mark/unmark a reminder on

the selected programme. You can set up to a maximum of

10 reminders.

The TV will wake up automatically or display a message

when the programme is about to start. Follow the

instructions on screen to watch the programme.

4. Press the yellow colour key to jump to the Next or the

Previous day or back to Today.

5. Press the MENU/BROWSE key, while Programme Guide is

active, to activate the Programme Guide main menu.

° Use the cursor up/down to highlight and select a menu

item.

- What's on allows you to browse through the

programme guide information of your preferred EPG

channels.

- Search by genre allows you to search for the

programmes according to a selected genre.

- Scheduled reminders allows you to view and change

the reminders you have set.

Note: the reminder(s) will wake up your TV from

standby only if you switched off your TV with the B

key on your remote control.

- Preferred EPG channels are the channels from which

the EPG data is currently being acquired.This menu

allows you to mark/unmark (up to 50) preferred EPG

channels.

Note: after the installation of your channels, by default

40 channels with available EPG data will automatically

be marked as preferred EPG channel.

Programme Guide What’s on

12:00 South today

What’s on

13:30 Working lunch

12:30 Brainteaser

12:00 This is BBC THREE

.........

Search by genre

Scheduled reminders

Preferred EPG chann..

Acquire EPG data

- Acquire EPG data allows you to update the

information for the preferred programme guide

channels. Follow the instructions on screen.

Note: Acquisition of EPG data is done automatically

while watching TV.

6. To quit the Electronic Programme Guide, press the a key

Info

again.

Tips:

- the EPG screen will not include TV channels which are

not in the Preferred channel list or which are uninstalled

(See Rearrange menu).

- new added channels (via reinstallation or installation) will

have to be marked in the preferred EPG channel list

before you can see EPG data.

Download from Www.Somanuals.com. All Manuals Search And Download.

Multimedia Browser

The Multimedia browser lets you display pictures, movies or

play audio files stored on a USB device.The Multimedia browser

application is invoked from the main menu.

- Following file formats can be reproduced:

for pictures: JPEG

for audio: MP3, MP3 Pro, LPCM

for video: MPEG1, MPEG2

- Only FAT/DOS-formatted memory devices are supported.

- Philips can not be held responsible if your USB device is not

supported.

To view content from a USB device

Tip: if your USB device does not fit into the USB connector at

the side, use an USB extend cable to connect the USB device

to the USB port.Ask your dealer for more information.

To insert a USB device

Note: USB devices are not supplied with this TV.

In case of a USB-memory stick or a digital camera, connect

it to the USB connector at the side. See To make video and

audio connections, Side panel overview, p. 44.

When a USB device is inserted, the Multimedia browser

menu is displayed automatically. See further.

To remove the USB device

1. Press the MENU/BROWSE key on the remote control to

switch off the main menu.

2. Remove the USB device.

Download from Www.Somanuals.com. All Manuals Search And Download.

Multimedia Browser (Continued)

Multimedia Browser menu

Television

Multimedia

TV menu

1. Insert a USB device.

2. Select the USB device under Multimedia with the cursor

up/down.

TV channels

Programme guide

The Multimedia browser allows you to browse content

stored on the inserted USB device.

The 2-panel browser will be shown with the left panel

containing the content types (Music, Pictures, Movies).

The right panel will display the content that is available

of the selected content type.

Picture

USBDevice 1

Music

London 2005

The Beatles

Xmas2004.alb

arnold.jpg

3. Press the cursor right to enter the content.

4. Press the cursor up/down to select a content.

5. Press the cursor right to enter the content.

6. Press the cursor up/down to select a file or a directory.

Picture

Movies

Note: press the green colour key to display all the image

files in the current directory as thumbnails when browsing

pictures. Press the green key again to display the image

files in a list.

USBDevice 1

Picture

London 2005

pic001.jpg

pic002.jpg

pic003.jpg

pic004.jpg

London2005

The Beatles

Xmas2004.alb

arnold.jpg

7. In case a file is selected, press the OK key to display a

picture file or to play a video or an audio file.

In case a directory, album or playlist is selected, press

the cursor right to enter the content or press the OK key

to start a slide show or a loop playback of the files present.

8. Press the cursor left to keep music playing and switch back

to the Multimedia menu.

9. Press one of the colour keys on the remote control to

perform the corresponding function mentioned at the

bottom of the screen.

USBDevice 1/Picture/London2005

pic001.jpg

London2005

pic001.jpg

pic002.jpg

pic003.jpg

pic004.jpg

Tip: the blue colour key can, if necessary, be used to let

USBDevice 1/Picture/London2005

the colour keys reappear.

London2005

pic001.jpg

10. To stop playing content, press the ‡ key on the remote

control.

Notes:

- your TV supports slide shows with background music.

See Annex 2, Philips TV-slideshow format with

background music, p. 59;

pic001.jpg

- the playback will continue to play even if temporarily

switched to browser screens.The audio will be stopped

when another song starts playing, or when the end has

been reached;

Press OK to play.

- more technical remarks can be found in Annex 3, Philips

TV-Digital camera and USB issues, p. 61.

Following icons may appear:

folder

self made playlist/album

video

pictures

music

Download from Www.Somanuals.com. All Manuals Search And Download.

Multimedia Browser (Continued)

Function keys at the bottom of the screen

Details

to display a description of the selected file

or directory

Transitions

Slide time

to select if you like to apply a transition

during a slide show

to select the duration a picture will be

displayed in a slide show

Rotate

to rotate a picture

Repeat one/all

Shuffle

to repeat the playback of a music file

to shuffle music collections in a random way

Zoom

to select one of the zoom magnifications

(x1, x2, x4) with the cursor up/down.

Additionally you can shift the selected zoom

window over the screen with the cursor

keys.

Full/small screen to toggle between a full or a small screen

Note: to rotate a picture or to select one of the zoom

magnifications, first stop the slide show with the

key or

the blue colour key.

Multimedia function keys on the remote control

‡

to fast rewind displaying content

to stop playing content

- to play a single file, start a slide show, playback of a

folder or other collection

- to pause playing content

†

to fast forward displaying content

Download from Www.Somanuals.com. All Manuals Search And Download.

Teletext

Note:Teletext is not available via equipment connected to the

HDMI

connector.

Most TV channels broadcast information via teletext.

This TV has a 1200 pages memory that will store most

broadcasted pages and subpages to reduce waiting time.After

each programme change, the memory is refreshed.

Press b to switch the teletext on.

The main index page appears on the screen.

Select aTeletext page

Enter the desired page number with the digit keys or with

the -P+ key.

Select the options at the bottom of the screen with the

colour keys.

Previous selected teletext page

Press the 0 key.

SelectT.O.P. teletext broadcasts

Press i.

A T.O.P. overview of the teletext subjects available is

displayed.

Select with the cursor up/down, left/right the desired

subject and press the OK key.

Note: not all TV channels broadcast T.O.P. teletext.

Select subpages

When a selected teletext page consists of different

subpages, a list of available subpages appears on the screen.

Press the cursor left or right to select the next or previous

subpage.

Picture/Teletext

1. Press the b key.

2. Press the b key to show Teletext on the right of the

screen.

3. Press the b key to return to a full teletext picture.

4. Press the b key to return to a full screen picture.

Download from Www.Somanuals.com. All Manuals Search And Download.

Teletext (Continued)

Hypertext

With hypertext you can quickly jump to a pagenumber or

search for a specific word shown on the current teletext

page.

1. Press the OK key to highlight the first word or a number

on the page.

2. Use the cursor up/down, left/right to select any other word

or number you want to search for.

3. Press the OK key to confirm.The search starts.

A message appears at the bottom of the screen to

indicate the searching, or that the word or page is not

found.

4. Use the cursor up until the top of the page to exit

hypertext.

Enlarge aTeletext page

Press the OPTION key on the remote control repeatedly

to display the upper teletext part, the lower teletext part

and then to return to the normal teletext page size.

Teletext menu

The Teletext menu offers various functions to control teletext.

1. Switch teletext on and press the MENU/BROWSE key to

activate the menu.

2. Press the cursor up/down to select the menu items.

3. Press the OK key to activate.

4. Press the MENU/BROWSE key to leave the teletext

menu.

Reveal

Off

Cycle subpages

Language

Off

Gr. II

Reveal

Reveals/conceals hidden information on a page, such as

solutions to riddles and puzzles.

Cycle subpages (if subpages are available)

Makes the subpages cycle automatically.

Press the OK key to activate and to deactivate again.

Language

If the displayed characters on screen do not correspond

with the characters used by the teletext broadcaster, you

can change the language group here.

Select Group I or Group II with the OK key.

Download from Www.Somanuals.com. All Manuals Search And Download.

Teletext (Continued)

Digital text (only for UK)

Some digital channels offer dedicated digital text services (for

example BBCi).

1. Press b to switch Digital text on.

Note: UK only: Digital text is displayed when programmes

are carrying digital text or interactive services.

2. To use the digital text, follow the instructions on screen.

3. Depending on the service, you may be asked to use the

cursor keys, the OK key, the coloured keys, the teletext key

and sometimes the digit keys.

4. When you have finished watching teletext, select a different

channel with the -P+ keys or follow the instructions on

screen to return to picture.

5. Press ‡ CANCEL to cancel digital text or interactive

services.

Text info

Some digital channels also offer information on the

programme being broadcast. In that case a message may

appear at the bottom of the screen for a few seconds.

Follow the instructions on screen and use the cursor keys

to scroll through the next pages.

Note: digital text will not be available when Subtitles are set

to On in the Features menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

To make video and audio connections

Tip: use the inputs that are available on your equipment that provide the best video or audio

performance, as below.

Note: your TV comes with all types of connectors with the exception of the DVI connector but

some of your equipment may be equipped with this type. In this case you'll need a DVI to HDMI

adapter or a HDMI to DVI cable and separate audio cables, all available at your local dealer.

Warning: be sure to connect the DVI output connector first, then connect to the HDMI input on

your TV.

Best video performance

Connector table

Audio connection

required

HDMI

(High-Definition

Multimedia

Interface)

DIGITAL

AUDIO

DIGITAL

AUDIO

Component video

(480p/576p/720p/

480i/576i/1080i)

AUDIO

Yes

Digital audio

HDTV & Progressive

480p, 576p, 720p, 1080i

HDTV & Progressive

480p, 576p, 720p, 1080i

EXT3

DIGITAL

AUDIO

Component video

(480p/576p/720p/

480i/576i/1080i)

AUDIO

Yes

HDTV & Progressive

480p, 576p, 720p, 1080i

HDTV & Progressive

480p, 576p, 720p, 1080i

Analog audio

EXT3

Scart

EUROCONNECTOR

S-VIDEO

S-Video

Yes

VIDEO

Video

Yes

RF/Coaxial

Notes:

- cables are often colour-coded to connectors. Connect red to red, white to white....

- component video (YPbPr) connection is necessary to view video sources, for example digital

broadcastings coming from a HD receiver, in 1080i, 720p, 576i, 576p, 480i or 480p,

- PC equipped with aVGA connector, see p. 50.

Download from Www.Somanuals.com. All Manuals Search And Download.

To make video and audio connections - Side panel overview

Camera, Camcorder, Game

1. Connect your camera, camcorder or game as

shown.

2. Connect to VIDEO 2 and AUDIO L 3 for

mono equipment. For stereo equipment also

connect AUDIO R 3.

S-VHS quality with an S-VHS camcorder is

obtained by connecting the S-VHS cables with

USB

the S-VIDEO input 1 and AUDIO inputs

Warning: do not connect cable 1 and 2

at the same time.This may cause picture

distortion !

Headphone

1. Insert the plug into the headphone socket L

as shown.

2. The headphone impedance must be between 8

and 4000 Ohm.The headphone socket has a

3.5 mm jack.

In the Sound menu select Headphone

volume to adjust the headphone volume.

Tip: Press ¬ on the remote control to

switch off the internal loudspeakers of the TV.

USB

See Multimedia browser, p. 37.

Download from Www.Somanuals.com. All Manuals Search And Download.

To make video and audio connections - Rear panel overview

AUDIO OUT

DISPLAY SYNCHRONIZED

DIGITAL

AUDIO

OUT

AUDIO

OUT

DIGITAL

AUDIO

DIGITAL

AUDIO

CABLE

HDTV

Progressive

480p, 576p, 720p, 1080i

EXT3

ETHERNET

HDMI

VGA

ANTENNA

EXT2

EXT1

ETHERNET

HDMI

AUDIO IN L/R

PC-VGA

ANTENNA

VCR

DVD player

Analog

Home Cinema

amplifier

Digital

Home Cinema

amplifier

Satellite

receiver

AUDIO OUT

DISPLAY SYNCHRONIZED

DIGITAL

AUDIO

OUT

AUDIO

OUT

HD receiver

AUDIO

DIGITAL

AUDIO

YPbPr

HDTV & Progressive

480p, 576p, 720p, 1080i

EXT3

PC -VGA

AUDIO IN L/R

VGA

HDMI 1

HDMI 2

AUDIO IN L/R

PC-VGA

ANTENNA

EXT2

EXT1

AUDIO IN L/R

DIGITAL

AUDIO

DVI

1 DVD recorder - 1VCR

2 DVD recorders

2VCRs

PC DVI

DVD player

HD receiver

DVI

Analog

Home Cinema

amplifier

VCR

Decoder

DVD player

DVI

Decoder

HD receiver

Game console

Download from Www.Somanuals.com. All Manuals Search And Download.

Connect a VCR or DVD recorder

Warning: do not place your recorder too close to the screen as some recorders may be susceptible

for signals from the display. Keep a minimum distance of 0,5 m from the screen.

With a eurocable

ANTENNA

EXT2

EXT1

CABLE

1. Connect the aerial cables 1 and 2 as

shown.

ANTENNA

2. Connect the eurocable 3 as shown.

3. Make your selection of the source to which

theVCR has been connected in the Installation

menu, Select your connections, p. 32.

EXT 1/2

RECORDER

With the aerial cable only

1. Connect the aerial cables 1 and 2 as

shown.

2. Tune in your recorder’s testsignal and store the

testsignal under programme number 0.

See Analogue: manual installation, p. 29.

See also the handbook of your recorder.

Connect a satellite receiver

With a eurocable

CABLE

1. Connect the aerial cables 1 and 2 as

shown.

2. Connect your satellite receiver to EXT1 or 2

EXT2

EXT1

with a eurocable 3.

3. Select the equipment you have connected in

the Installation menu, Select your connections,

p. 32, and link it to EXT1 or 2.

ANTENNA

EXT 1/2

With ComponentVideo connectors

See Connect a DVD player, a satellite receiver

or a HD receiver, p. 49.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connect a DVD player, HD receiver or game console

Tip: if necessary, you can adjust the picture position to the centre of the screen with the cursor keys.

With a HDMI connector

HDMI 1/2

HDMI is the leading new standard for Digital video

and audio interconnection.

HDMI 1

HDMI 2

AUDIO IN L/R

PC-VGA

1. Connect your equipment with the HDMI

connector.

2. Select the equipment you have connected in

the Installation menu, Select your connections,

p. 32, and link it to HDMI 1 or 2.

HDMI

Note: in case of any problems, see Annex 4:

Issues referring to connected peripherals with a

HDMI connector, p. 62.

Connect a DVD player or HD receiver

Tip: if necessary, you can adjust the picture position to the centre of the screen with the cursor keys.

With a DVI connector

AUDIO OUT

DISPLAY SYNCHRONIZED

DIGITAL

AUDIO

OUT

AUDIO

OUT

Note: only a DVD player with DVI with digital

sound can be connected to the HDMI

connector.

DIGITAL

AUDIO

DIGITAL

AUDIO

HDTV & Progressive

480p, 576p, 720p, 1080i

EXT3

1. Connect the DVI to HDMI cable to one of the

HDMI connectors of your TV 1.

HDMI

2. Connect the audio cable 2 to the DIGITAL

AUDIO IN connector of the TV.

HDMI 1

HDMI 2

AUDIO IN L/R

PC-VGA

3. Select the equipment you have connected in

the Installation menu, Select your connections,

p. 32 and link it HDMI 1 or 2.

4. Also select DIGITAL AUDIO IN in the same

Connections menu.

HDMI

DIGITAL

AUDIO

DVI

Download from Www.Somanuals.com. All Manuals Search And Download.

Connect a DVD player, a satellite receiver or HD receiver

Tip: if necessary, you can adjust the picture position to the centre of the screen with the cursor keys.

With ComponentVideo Connectors

AUDIO OUT

DISPLAY SYNCHRONIZED

DIGITAL

AUDIO

OUT

AUDIO

OUT

1. Connect the three separate component video

cables 1 to theYPbPr jacks on the DVD player

and to the Y, Pb and Pr jacks of EXT3 on the

TV.

DIGITAL

AUDIO

2. Connect the audio cable 2 to the digital out of

the equipment and to the DIGITAL AUDIO IN

connector of the TV.

HDTV & Progressive

480p, 576p, 720p, 1080i

EXT3

DIGITAL

AUDIO

EXT3 :

AUDIO IN

R / L

EXT3 :

YPbPr

3. Select the equipment you have connected in the

Installation menu, Select your connections, p. 32

and link it to EXT3. Also select DIGITAL

AUDIO IN in the same Connections menu.

4. In case of a DVD player with analogue audio,

connect the audio cable to the DVD’s audio L

and R jacks and to the AUDIO IN L/R jack of

EXT3 3.

5. In case of a HD receiver and/or a satellite

receiver also connect the cable TV cable and/or

the satellite antenna cable 4 and the aerial

cable 5.

DVD / STB

Notes:

- cables are often colour coded. Connect red to

red, white to white, etc..;

AUDIO OUT

DISPLAY SYNCHRONIZED

DIGITAL

AUDIO

OUT

- the labels for the component video sockets may

differ depending on the DVD player connected.

Although the abbreviations may vary, the letters

B and R stand for the blue and red component

signals, respectively, and Y indicates the

luminance signal. Refer to the DVD player’s

instructions for use for definitions and

connection details;

DIGITAL

AUDIO

CABLE

HDTV & Progressive

480p, 576p, 720p, 1080i

EXT3

EXT3 :

AUDIO IN

R / L

EXT3 :

YPbPr

ANTENNA

- to get an optimal viewing, it is advised to switch

your equipment to the highest possible

supported display modes.

ANTENNA

Warning: in case you notice scrolling images,

wrong colours or no colour, no picture, or even

combinations of these on your screen, verify if

the connections are done in the correct way and

if the resolution and the signal standard of the

connected equipment are set in the right way.

See the handbook for your equipment.

SAT / STB

Download from Www.Somanuals.com. All Manuals Search And Download.

Connect a PC

Notes:

- only a PC with digital sound can be connected to the HDMI connection;

- if your PC does not have digital sound output, connect your PC via aVGA connector;

- before connecting your PC to the TV, select your PC monitor settings to a refresh frequency of

60 Hz;

- supported PC monitor modes:

VGA 640 x 480

SVGA 800 x 600

XGA 1024 x 768

AUDIO OUT

DISPLAY SYNCHRONIZED

PC equipped with aVGA connector:

DIGITAL

AUDIO

OUT

1. Connect one end of aVGA cable 1 to the

video card of the computer and the other end

to the VGA connector at the bottom of the

TV. Fix the connector firmly with the screws

on the plug.

DIGITAL

AUDIO

HDTV & Progressive

480p, 576p, 720p, 1080i

EXT3

2. In case of a Multimedia computer, connect the

audio cable 2 to the AUDIO outputs of your

computer and to the AUDIO IN L/R input of

the TV.

AUDIO in R/L

VGA

AUDIO IN L/R

PC-VGA

3. Select VGA in the Installation menu, Select

your connections, p. 32 and link it to VGA.

4. Also select AUDIO IN L/R in the same

Connections menu.

VGA

PC equipped with a DVI connector:

With Digital audio

AUDIO OUT

DISPLAY SYNCHRONIZED

DIGITAL

AUDIO

OUT

AUDIO

OUT

1. Use a DVI to HDMI cable to connect to one of

the HDMI connector of your TV 1.

2. Connect the audio cable 2 to the DIGITAL

AUDIO IN connector of the TV.

3. Select the computer you have connected in the

Installation menu, Select your connections,

p. 32 and link it to HDMI 1 or 2.

DIGITAL

AUDIO

HDTV & Progressive

480p, 576p, 720p, 1080i

EXT3

HDMI

AUDIO in L/R

DIGITAL

AUDIO

4. Also select DIGITAL AUDIO IN in the same

Connections menu.

HDMI 1

HDMI 2

AUDIO IN L/R

PC-VGA

HDMI

With Analogue audio

1. Use a DVI to HDMI cable to connect to the

HDMI 2 connector of your TV 1.

2. Connect the audio cable 3 to the AUDIO

IN L/R input of the TV.

DVI

3. Select the computer you have connected in the

Installation menu, Select your connections,

p. 32 and link it to HDMI 2.

4. Also select AUDIO IN L/R in the same

Connections menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connect a Home Cinema amplifier

AUDIO OUT

Digital Home Cinema amplifier

DIGITAL

AUDIO

OUT

AUDIO OUT

DISPLAY SYNCHRONIZED

DIGITAL

Connect a digital Home Cinema amplifier to

the DIGITAL AUDIO OUT connector 1 at

the bottom of the TV.

AUDIO

OUT

AUDIO

OUT

DIGITAL

AUDIO

Tip: to avoid visible delay between picture

and sound, use this DIGITAL AUDIO OUT

connector to connect your Home Cinema

amplifier.

HDTV & Progressive

480p, 576p, 720p, 1080i

EXT3

DIGITAL

AUDIO

OUT

AUDIO OUT

DISPLAY SYNCHRONIZED

AUDIO

OUT

DIGITAL

AUDIO

OUT

AUDIO

OUT

Analogue Home Cinema amplifier

DIGITAL

AUDIO

According to the type of connector cables and

the connector input available on your Home

Cinema amplifier, connect your receiver to the

AUDIO OUT L and R connectors 3 or to

EXT1 or 2 2 at the bottom or the rear of

the TV.

HDTV

Progressive

480p, 576p, 720p, 1080i

EXT3

EXT2

EXT1

AUDIO

OUT

EXT2

EXT1

EXT 1 / 2

Download from Www.Somanuals.com. All Manuals Search And Download.

Use the Common Interface slot

Warning: switch off your TV before any module is inserted in the Common Interface slot.

Note: this functionality is only available in certain countries.

To receive scrambled DTV signals you will need a

COMMON INTERFACE

CA (Conditional Access) module and a Smart card

provided by the service provider.

COMMON INTERFACE

HDMI 1

HDMI 2

A CA module can enable additional services, for

example Pay TV.

Contact your Common Interface service provider

to get more information about these modules.

Although CA module types may vary dependent

on the manufacturer, each one of the CA modules

supports a certain kind of encryption system.Your

TV supports CA modules to work with the DVB-T

standard.

COMMON INTERFACE

Note that a smart card may only be valid for a

single broadcast channel.

CA modules and smart cards are neither supplied

nor optional accessories from Philips.

The CA module is responsible for the messages

and texts on screen. In case of failure or strange

behaviour, you must call your CI service

broadcaster.

Insert a CA module

Insert the specified Conditional Access module

into the Common Interface slot as far as it will

go. It may take a few minutes before the CA

module is activated and service information is

downloaded.

Warning: when you connect the CA module

incorrectly, it may damage the card and the TV.

After inserting a card, leave it in the slot

permanently. Do not remove it from the slot

unless asked to do so. For example, your card

has to be in the slot when your CI service

broadcaster wants to download new information

to the smart card. Once the CA module is

removed, your TV will no longer decrypt

scrambled digital DVB-T channels.

To access common interface applications, see TV

menu,Adjust feature menu settings, Common

Interface, p. 26.

Download from Www.Somanuals.com. All Manuals Search And Download.

Select connected equipment

Before operating your connected equipment you have to make

a selection in the Installation, Select your connections menu,

p. 32.

1. Press the MENU/BROWSE key.

2. Select TV menu and press the cursor right.

3. Select Installation.

4. Press the cursor right.

5. Select Connections.

6. Press the cursor right.

7. Select the input to which the peripheral equipment is

connected.

8. Press the cursor right again to enter the list of types of

peripherals connected to the selected input

9. Select the peripheral equipment with the cursor up/down.

Record with your recorder

Note: to record digital programmes to an analogue recorder, the TV needs to be switched on and

tuned to that digital programmes.

Record aTV programme

You can record a TV programme using your recorders tuner

without affecting your TV.

1. Select the channel number on your recorder.

2. Set your recorder to record.

See the handbook for your recorder.

Note: when recording analogue progammes, switching

channel numbers on your TV does not disturb recording !

Download from Www.Somanuals.com. All Manuals Search And Download.

Audio- and video equipment keys

Most of the audio and video equipment from our range of

products can be operated with the remote control of your TV.

Press one of the keys after you pressed one of the mode keys

(DVD, STB, VCR, AUX) according to the equipment you want to

operate with this remote control.

See Use of the Remote control, p. 5-6.

to switch to standby

for record,

for rewind (VCR, CD);

search down (DVD)

for stop,

‡

for play, for pause

†

for fast forward (VCR, CD);

search up (DVD)

to display information

to switch the menu on or off

for chapter, channel, track selection

digit entry,

MENU/BROWSE

- P +

0 to 9

cursor up/down

to select the next or the previous disc

(CD)

cursor left/right

to select the previous or following

track (CD)

to select a DVD title/chapter;

index (AUX)

to select your choice of

subtitle language (DVD)

Normal mode: if no action is being undertaken within 30

seconds, the remote control returns to TV mode.

Expert mode: in Expert mode the remote will stay in the

selected mode even when the 30 seconds time-out is elapsed.

To select between Normal and Expert mode

1. Select TV mode with the TV key.

2. Press the OK key simultaneously with the ¬ key for four

seconds.

When the B key is On for one second, the Expert mode

is selected and the remote control will remain in the

mode selected.

3. Select the desired mode (DVD, STB, VCR, AUX)

4. To go back to the TV mode, select TV and repeat steps

1 to 3.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Symptom

No picture

Possible cause/Remedy

< Verify if the supplied cables are connected properly. (The aerial cable to the

TV, the other aerial to your recorder, the power cables, ..)

< Verify if you selected the correct source.

< Verify if the child lock has been switched off.

Poor picture

< Verify in the Manual installation menu if you have selected the correct TV

system.

< Verify if your TV or house aerial isn't located too close to loudspeakers,

non-earthed audio equipment or neon lights, etc.

< Mountains or high buildings can cause double pictures or ghost images.

Sometimes you can improve the picture quality by changing the direction of

the aerial.

< Is the picture or teletext unrecognisable or do you experience bad teletext

reception ?Verify if you have entered the correct frequency, or fine tune the

frequency for that specific channel or adjust the antenna direction if the problem

isn’t solved by finetuning. See Installation,Analogue: manual installation, p. 29.

Poor colour

No sound

< Select Factory settings in the Installation menu.

< Verify the connections between the optional equipment and the TV.

< Verify if the volume isn't at minimum.

< Verify if the sound hasn't been muted with the ¬ key.

Verify the connections between the optional equipment and the TV.

Sound and picture

interruptions using

HDMI to HDMI

connection

< If it occurs occasionally, perhaps there is something wrong with the broadcasted

programme.

< If it occurs persistently, see the manual of your connected equipment to verify the

necessary adjustments.

< Alternatively, connect an extra audio cable (either an analogue or a digital audio

cable) from your connected peripheral to your TV.

Verify whether you selected the connected equipment in the Installation menu,

Select your connections and also select the respective audio input in the same

Connections menu.

Note:An analogue audio cable must be linked to HDMI 2.

< Limit the HDMI cable length to max 5 m.

< Verify if the connected equipment is properly selected in the Installation menu,

Connections, according to the connection you have made HDMI 1 or 2.

No sound when

using DVI to HDMI

connection

< Verify whether you properly connected the audio cable to the DIGITAL AUDIO

IN connector of the TV.

< Verify whether you selected the connected equipment in the Installation menu,

Select your connections and if you linked it to HDMI 1 or 2 according to where

you made the connection.

Also verify if you selected digital audio in in the same Connections menu.

No digital channels < Contact your dealer about DigitalVideo Broadcasting Terrestrial signal availability

in your country.

No subtitles

(UK ONLY)

< Under certain circumstances Digital text or interactive services may have priority

over subtitles.This can result in the subtitles not automatically reappearing when

leaving Digital text or interactive services on a channel which is broadcasting

subtitles. In these cases subtitles can be initialised, either by toggling the OPTION

or the MENU key on the remote control or by changing channel.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting (Continued)

Symptom

Possible cause/Remedy

The remote does

not function

< Verify if the remote is set correctly for the equipment your are using.

< Verify if the batteries are not dead. Replace the batteries.

You can still use the keys at the right side of the TV.

< Select TV mode on your remote control.

< When pressing a key and some key leds are blinking with a higher speed and

lower intensity than in a normal working condition, and your TV does not react on

the key press, remove the batteries out of the remote control and put them back

again.

The remote of

connected equip-

ment does not

function well

< The infrared signals of the screen may influence the reception sensibility

of other peripherals.

Solution: replace the batteries of the remote of other peripheral

equipment.

No photo or music < Verify if the source complies with a supported code.

play or in poor

quality

No stable or not

synchronisedVGA

picture

< Verify if you have selected the correctVGA mode in your PC.

See Connect a PC, p. 50.

< Verify the connections between the TV and the PC.

No solution found

for your picture or

sound problem

< Switch off your TV off and then on again once.

Never attempt to repair a defective TV yourself.

Verify with your dealer or call a TV technician.

Red blinking led

< Unplug the mains cord for 10 seconds and insert it in again.

Black bars with

HD channels

< Select another picture format.

No EPG data

available

The Electronic Programme Guide function and background programme

information are only made available by TV channels that provide EPG

information and in countries which support EPG.

See www.philips.com/support.

Download from Www.Somanuals.com. All Manuals Search And Download.

Annex 1 - Philips TV software upgrade with portable memory

Introduction

Philips continuously tries to improve its products and it

wants you to profit of that even after your purchase.

Therefore it allows you to upgrade your TV software using a

USB memory device (not supplied).

You can execute the software upgrade procedure yourself.

TV menu

Verifying the version of the TV software

Installation

Software upgrade

Current softw. info

Local upgrades

Announcement

Before starting the software upgrade procedure, it is advised to

check what your current TV software is.

.............

Time zone

1. Select Software upgrade in the Installation menu.

2. Press the cursor right.

The Software upgrade menu moves to the left panel.

3. Select Current software info to observe the version and

the description of the current software.

Channels

Preferences

Connections

Decoder

Factory settings

Software upgrade

Preparing a USB portable memory for software

upgrade

Info

What do you need ?

• A personal computer with web browsing capability.

• An archive utility that supports the ZIP-format (e.g.

WinZip for Windows).

• A preferably empty USB portable memory.

Note: Only FAT/DOS-formatted portable memory is

supported.

New software can be downloaded from the

www.philips.com/support website.

1. Insert a USB portable memory device into a PC linked to

the internet.

2. Go to www.philips.com/support.

3. Choose your country or area/language.

4. Enter your model number.

5. In the Search results, click on the model number.

6. Under Product support, click on Software and drivers.

7. Click on the Firmware Upgrade zip file.

8. Click on the Download arrow in the upper left corner of

your screen.

9. Save the latest software upgrade file to your computer.

10. Double click on the zip-file and copy the file “autorun.upg”

to the root directory on the USB portable memory.

Note: Only use software upgrades that can be found on

the www.philips.com/support website.

Download from Www.Somanuals.com. All Manuals Search And Download.

Annex 1 (Continued)

Upgrade theTV software

1. Switch off your TV and remove all memory devices.

2. Insert the USB portable memory that contains the

downloaded software upgrade.

3. Switch on your TV with the power key B at the side of the

TV.

Software Upgrade Application

Upgrade busy...

4. The upgrade process starts automatically.After a few

seconds the status of the upgrade procedure is displayed.

Software Id: TL32E-234

Done

Warning:

Validating

- You are not allowed to remove the USB portable

memory during the software upgrade procedure;

- In case of a power drop during the upgrade procedure,

don’t remove the USB portable memory from the TV.

The TV will continue the upgrade as soon as the power

comes back;

Programming

- If an error occurs during the upgrade you should retry

the procedure or contact your Local Customer Service

Centre.

5. When the message Operation successful appears, remove

the USB portable memory and restart your TV with the

power switch B at the side of the TV.

Your TV will start up with the new software.

Note: once the upgrade is finished use your PC to

remove the TV software from your USB portable memory.

If you need further assistance or in case of problems,

please call your local Philips Customer Centre. See Philips

Consumer Care on the www.philips.com/support website.

Download from Www.Somanuals.com. All Manuals Search And Download.

Annex 1 (Continued)

Local software upgrade procedure

TV menu

Installation

Software upgrade

New software, or the currently installed software version,

can also be obtained from the www.philips.com/support

website.

Current softw. info

Local upgrades

Announcement

.............

Time zone

Channels

1. Go to www.philips.com/support using the web browser

of your PC.

2. Follow the procedure to find the information and the

software related to your TV.

3. Select the latest software upgrade file and download it to

you PC.

4. Decompress the ZIP-file.

Preferences

Connections

Decoder

Factory settings

Software upgrade

Info

Rename the resulting file “autorun.upg” to for ex.

“upgrade.upg”.

Move the renamed file to the subdirectory “Upgrades”.

Remark: if there is no subdirectory “Upgrades” present,

please create one.

5. Insert the portable memory that contains the downloaded

software upgrade.

6. Select Software Upgrade in the Installation menu. Go to

Local upgrades.

The TV will list all compatible software available on the USB

portable memory and display the data for each selected

upgrade version.

7. Select the correct upgrade version and press the red colour

key to start the upgrade.

Your TV will restart and will automatically go to the upgrade

mode.After a few seconds it will display the status of the

upgrade procedure.

Warning: if you try to upgrade to a software version

equal or lower than the current version, a confirmation

will be asked. Downgrading to older software should only

be done in case of real necessity.

8. When the software upgrade was successful, remove the USB

portable memory and restart your TV with the power

switch B at the side of the TV.Your TV will start up with

the new software.

Note: Only use software upgrades that can be found on

the www.philips.com/support website.

Download from Www.Somanuals.com. All Manuals Search And Download.

Annex 2 - Philips TV-Slideshow Format with background music

Notes:

- the latest version of this document can be found on the Philips support website

(www.philips.com/support).

Use the type number of your TV to find this documentation and other related files.

- Philips can’t be held responsible for any problems that may occur as a result of the content in this

document. Errors reported to Philips will be adapted and published on the Philips support website

as soon as possible.

Introduction

This document explains how to make a Philips slideshow file with background audio.

Be aware that the content of this document is addressing technical or software skilled users.

To start the slideshow open the slideshow file in the Multimedia browser of your TV.

1. Press the MENU/BROWSE key on the remote control after having inserted a USB device and

switched on the TV.

2. Go to where you stored the slideshow file (.alb) on your portable memory.

3. Select the slideshow file and press the OK key to start the slide show.

4. To stop a slide show, press the ‡ key.

General Rules

- The slideshow will use plain ASCII XML syntax to allow the creation and editing of the slideshow

files using simple tools.

- All references to network content must be based on the global address of the content.

- Content on a Portable Memory (PM) doesn't have a global address; as a result content from a PM

can never be referenced from a slideshow not stored on the PM itself.

- To maintain portability, a slideshow stored on a PM should ONLY reference content on the same

PM. Referencing global addresses can result in inconsistencies if the PM is used on a non-

networked CE device. The latter is however not forbidden, it is only a recommendation.

- It is preferable that URL’s referencing PM content are based on a relative path starting from the

directory where the slideshow is stored. This path includes the device or drive name of the PM.

An absolute path to content will also be supported.

- relative path: pictures\test1.jpg, tamper.jpg, ..\new\bird.jpg, …

- absolute path: USB1:\pictures1\foo_bar.jpg, C:\f1.jpg, \organization.jpg, …

General Format

The format and syntax below will be used to create the slideshow file (simple ascii text) with the

extension .alb (.ALB). Examples: slshow1.alb, summer_holiday_2004.ALB, test.alb, …

The following syntax should be used to create the text file:

<?xml version="1.0" encoding="ISO-885h9-1" ?>

<philips-slideshow version="1.0" >

<title>Title of the slideshow</title>

<audio>audio_url</audio>

<slide-duration>30</slide-duration>

<slide>slide_1_url</slide>

<slide>slide_2_url</slide>

<slide>slide_3_url</slide>

<slide>slide_4_url</slide>

<slide>slide_5_url</slide>

<slide>slide_6_url</slide>

...

<slide>slide_N-1_url</slide>

<slide>slide_N_url</slide>

</slides>

</philips-slideshow>

Download from Www.Somanuals.com. All Manuals Search And Download.

Annex 2 (Continued)

Supported XML-tags

The following table gives a description of the XML syntax.

Tag Name

Use

Description

philips-slideshow

title

mandatory

optional

Philips slideshow signature including the version.

The title of the playlist.

audio

optional

The audio-URL following this tag will define the music playing

in the background during the slideshow.

A single song or playlist (.m3u & .pls) are the only valid audio

references. Other reference will not result in any audio

playback. If a single song is referenced the song will be

repeated forever. If a playlist is referenced the playlist will be

played in sequence with a repeat at the end of the playlist.

optional

The default display time (in 0,1 second) of a slide. The TV

application isn’t obliged to support this tag. The TV application

can force the use of one or multiple predefined display times.

slide-duration

mandatory

optional

Identifies the slides to show.

slides

slide

Identifies the URL of the individual slide.

Download from Www.Somanuals.com. All Manuals Search And Download.

Annex 3 - Philips TV - Digital camera and USB issues

Notes:

- the latest version of this document can be found on the Philips support website

(www.philips.com/support);

- the software of your TV is upgradeable. If you have problems first check if you have the latest

software installed on your TV. The latest software, together with instructions, can be found on the

Philips support website. Use the type number of your TV to find this documentation and other

related files.

- Philips can’t be held responsible neither for any errors in the content of this document nor for any

problems as a result of the content in this document. Errors reported to Philips will be adapted

and published on the Philips support website as soon as possible.

Digital Camera Issues

If a USB connection between your digital camera and the TV isn’t working, you can try the

solutions below to resolve your problem.

- Make sure your digital camera is switched on and verify if the configuration of your digital camera

is correct (see the manual of your digital camera for more information).

- Some digital cameras allow you to switch off the USB interface. Make sure that the USB interface

is switched on before connecting to the TV.

- If you have a digital camera with only internal memory (no removable memory) you can try to

copy the content manually to a USB memory device using a personal computer.

- Some digital cameras allow you to switch between PTP (Picture Transfer Protocol) or “PC Link”

and USB Mass Storage. Make sure that you select USB Mass Storage or “PC Drive” on your

digital camera.

- If your camera supports different interface settings be sure to try them one by one or contact

the reseller of your camera to find out the correct setting.

USB Memory Device Issues

- Devices connected to the USB port of your TV must be “Mass Storage Class” compliant. If your

device (digital camera. MP3 player, portable harddisk, …) is not “Mass Storage Class” compliant it

will not be detected by the content browser of the TV.

- The following subsets of the Mass Storage Class specification are supported:

The implementation of the TV is based on the “Universal Serial Bus Mass Storage Class

Specification Overview” (v1.2, June 23, 2003) including all documents referenced by the

document. The document can be found on the USB standardisation website (www.usb.org).

Full support of the USB Mass Storage Class Bulk-Only Transport (bInterfaceProtocol = 50h).

Full support of SubClass Code = 05h; SFF-8070i spec.

Full support of SubClass Code = 06h; SCSI transparent command set.

- For large USB memory devices, when you are in the Content Browser, it may take a long time

before you can access your files.

- When using a USB portable harddisk: Due to the high power consumption of the harddisk, it is

advised to use the external power supply of the portable harddisk to guarantee proper working

under all conditions.

Digital Content Issues

• Only FAT (DOS) formatted (initialized) portable memory is supported. Errors in this formatting

can result in unreadable content. If such problems appear try to re-format the card. Be aware that

formatting the card will also delete all the content on it (pictures, music, …).

• The maximum size of any multimedia file should never exceed 4Gbyte.

• Do not use a dot “.” in folder naming.

• If video streams are supporting multiple audio tracks the first audio track will automatically be

selected, the other audio tracks can’t be selected.

• External subtitle files (e.g. DivX.srt subtitle files) are not supported.

Download from Www.Somanuals.com. All Manuals Search And Download.

Annex 4 - Issues referring to connected peripherals with a HDMI connector

The HDMI IN connector allows the following TV and monitor display modes:

HD Standard Definition TV (SDTV)

Enhanced Definition TV (EDTV)

High Definition TV (HDTV)

640x480i

720x480i

720x576i

640x480p

720x480p

720x576p

1920x1080i

1280x720p

PC VGA

SVGA

640x480

800x600

1024x768

XGA

If necessary, you can adjust the picture position to the centre of the screen with the cursor keys.

Due to legal requirements, it is possible that with certain copy protected PCM audio qualities from

a peripheral equipment connected to the HDMI input, the Digital audio output signal is muted.

Proper working is only guaranteed with HDMI compliant consumer products. Limit the cable length

to maximum 5 m.

In case no signal is detected from your HDMI equipment, switch off the HDMI equipment and then

on again.

Sound interruptions using HDMI to HDMI connection

In case of persistent sound interruptions, connect an extra audio cable from your connected peripheral

to your TV.

Extra analogue audio cable:

Extra digital audio cable:

AUDIO OUT

DISPLAY SYNCHRONIZED

HDMI 2

DIGITAL

AUDIO

OUT

AUDIO

OUT

DIGITAL

AUDIO

HDMI 1

HDMI 2

AUDIO IN L/R

PC-VGA

HDTV

Progressive

480p, 576p, 720p, 1080i

EXT3

HDMI

DIGITAL

AUDIO

HDMI

AUDIO IN L/R

PC-VGA

1. Connect your peripheral equipment with

the HDMI 2 connector 1.

2. Connect the analogue audio output of your

peripheral equipment to the AUDIO L/R

input of your TV 2.

1. Connect your peripheral equipment with the

HDMI 1 or 2 connector 1.

2. Connect the digital audio output of your

peripheral equipment to the DIGITAL AUDIO

IN input of your TV 2.

3. Select the equipment you have connected

in the Installation menu, Select your

connections, p. 32, and link it to HDMI 2.

4. Also select AUDIO IN L/R in the same

Connections menu.

3. Select the equipment you have connected in

the Installation menu, Select your connections,

p. 32, and link it to HDMI 1 or 2.

4. Also select DIGITAL AUDIO IN in the same

Connections menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

active control ........................... 17 fine tune..................................... 29 satellite receiver ...................... 49

ambilight .................................... 20 first time installation ................. 9 search for channels................. 27

analogue: manual installation. 29

antenna......................................... 4 game...................................... 44,48 select connected equipment. 53

audio receiver .......................... 51

set code..................................... 25

select your connections......... 32

audio equipment keys............. 54 HDMI connector..................... 48 settings assistant...................... 10

auto format............................... 17 headphone................................. 44 side connectors ....................... 44

automatic installation.............. 28 headphone volume.................. 19 sharpness................................... 15

avl (audio volume leveller)..... 19 hearing impaired................. 23,27 sleeptimer ................................. 24

home cinema amplifier........... 51 slideshow format..................... 60

balance....................................... 18 hue.............................................. 15 software upgrade ............... 33,57

batteries ................................ 4, 64 hypertext................................... 41 sound adjustment menu......... 18

brightness.................................. 15

standby key.................................. 5

installation menu...................... 27 store channels.......................... 28

subtitles...................................... 23

camera ....................................... 44

camcorder................................. 44 language preferences............... 27 surround mode........................ 19

care of the screen ..................... 2 light sensor ............................... 17 switch the TV on........................ 8

change code ............................ 25 location...................................... 31

channel list........................... 11,34

teletext ...................................... 40

child lock................................... 24 manual installation................... 29 teletext menu........................... 41

clock ............................................. 7 menu key................................... 11 teletext 2.5................................ 31

colour......................................... 15 MPEG reduction ...................... 17 time zone selection................. 28

colour enhancement............... 17 multimedia browser................ 37 tint .............................................. 15

colour keys.................................. 5 mute key...................................... 5 T.O.P. teletext pages................ 40

common interface slot........... 26

troubleshooting........................ 55

comp. video connectors.....47,49 navigate through the menus.. 11 tv menu settings ...................... 13

connections............................... 43

contrast ..................................... 15 on screen language.................... 9 uninstall...................................... 30

country selection..................... 28 on screen information.............. 6 usb connector.......................... 44

cursor keys.................................. 5 on timer..................................... 25 usb device.................................. 37

custom colour.......................... 22 option key ................................... 7

custom tint................................ 16 OK key......................................... 5 video equipment keys............. 54

volume...........................................5

decoder...................................... 32 PC............................................... 50 VCR............................................ 46

delta volume............................. 19 picture adjustment menu....... 15

demo .......................................... 26 picture format.......................... 17

digital audio language.............. 18 PIN code ................................... 25

digital natural motion ............. 16 pixel plus.................................... 16

digital subtitle language .......... 23 preferences menu.................... 31

digital teletext .......................... 42 preferred audio language ....... 27

digital: test reception .............. 29 preferred subtitle language.... 27

digital TV...................................... 8 previous channel........................ 6

DNR........................................... 16 programme title....................... 31

dual I/II....................................... 19

DVB-T .......................................... 8 quick access menu..................... 7

DVD player............................... 48

DVD recorder.......................... 47 radio channels.......................... 28

DVI connector.................... 48,50 rear panel overview................ 45

dynamic contrast..................... 16 rearrange channel list ............. 30

record a TV programme........ 53

EPG ........................................... 35 recycling..................................... 64

equalizer .................................... 19 reinstall ...................................... 30

euroconnector.............. 46,47,51 remote control........................... 5

reset factory settings.............. 33

factory settings......................... 33 rename....................................... 30

favourite key............................. 34 reshuffle..................................... 30

favourite channel list............... 34

features adjustment menu..... 23 safety warnings........................... 2

Download from Www.Somanuals.com. All Manuals Search And Download.

Recycling

The batteries supplied do not contain the heavy

metals mercury and cadmium. Please check on

how to dispose of exhausted batteries according

to local regulations.

R The packaging of this product is intended to

be recycled.Apply to the local authorities for

correct disposal.

Disposal of your old product

Your product is designed and manufactured with

highly quality material and components, which can

be recycled and reused.

When this crossed-out wheeled bin

symbol is attached to a product, it

means the product is covered by the

European Directive 2002/96/EC.

Please inform yourself about the local separate

collection system for electrical and electronic

products. Please act according to your local rules

and do not dispose of your old products with

your normal household waste.

The correct disposal of your old product will help

prevent potential negative consequences for the

environment and human health.

Product information

- Your TV consumes energy in standby mode. Energy consumption contributes to air and

water pollution.Very low standby power consumption.

- Specifications: see the product leaflet on www. philips. com/support.

- If you need further assistance, please call the customer support service in your country.

The corresponding telephone numbers and addresses are given in the supplied Worldwide guarantee

booklet.

België / Belgique

070 222 303

Ireland

01 601 1777

Portugal

2 1359 1442

€0.17/min

Local

Danmark

3525 8759

Italia

199 404 041

Schweiz / Suisse / Svizzera

0844 800 544

€0.25/min

Local

Deutschland

0180 5 356 767

Luxembourg

40 6661 5644

Svenska

08 5792 9100

€0.12/min

€0.23/min

Local

France

08 9165 0005

Nederland

0900 8407

Suomi

09 2311 3415

€0.20/min

Local

Norge

2270 8111

United Kingdom

0906 1010016

E§§A™

£0.15/min

0 0800 3122 1280 ¢ˆÚÂ¿Ó

Österreich

España

0820 901114

€0.20/min

902 888 784

€0.15/min

Download from Www.Somanuals.com. All Manuals Search And Download.

Pelco DVR DX3009 060 User Manual
Pentax Digital Camera Optio M30 User Manual
Philips DVD Player DVD737 User Manual
Philips DVD Recorder DVDR3575H User Manual
Philips Electric Toothbrush HX6910 User Manual
Philips Work Light IS LPW User Manual
Poulan Chainsaw PP3516AVX User Manual
Poulan Lawn Mower PRGT22H48A User Manual
Powermate Portable Generator PM0545003 User Manual
Powermate Portable Generator PMC543250 User Manual