Register your product and get support at
DCM3020
User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
h Do not install near any heat sources
such as radiators, heat registers, stoves,
or other apparatus (including amplifiers)
that produce heat.
1 Important
i Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
Safety
j Only use attachments/accessories
specified by the manufacturer.
k Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
This ‘bolt of lightning’ indicates uninsulated
material within your unit may cause an
electrical shock. For the safety of everyone
in your household, please do not remove
product covering.
The ‘exclamation point’ calls attention to
features for which you should read the
enclosed literature closely to prevent
operating and maintenance problems.
l Unplug this apparatus during lightning
storms or when unused for long periods
of time.
WARNING: To reduce the risk of fire or
electric shock, this apparatus should not be
exposed to rain or moisture and objects filled
with liquids, such as vases, should not be
placed on this apparatus.
m Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
CAUTION: To prevent electric shock, match
wide blade of plug to wide slot, fully insert.
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
n Battery usage CAUTION – To prevent
battery leakage which may result in
bodily injury, property damage, or
damage to the remote control:
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
•
Install all batteries correctly, + and -
as marked on the remote control.
g Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
Do not mix batteries (old and new
or carbon and alkaline, etc.).
Hearing safety
Remove batteries when the remote
control is not used for a long time.
Listen at a moderate volume.
•
Using headphones at a high volume can
impair your hearing. This product can
produce sounds in decibel ranges that
may cause hearing loss for a normal
person, even for exposure less than a
minute. The higher decibel ranges are
offered for those that may have already
experienced some hearing loss.
The batteries shall not be exposed
to excessive heat such as sunshine,
fire or the like.
o Apparatus shall not be exposed to
dripping or splashing.
p Do not place any sources of danger on
the apparatus (e.g. liquid filled objects,
lighted candles).
•
Sound can be deceiving. Over time your
hearing ‘comfort level’ adapts to higher
volumes of sound. So after prolonged
listening, what sounds ‘normal’ can
actually be loud and harmful to your
hearing. To guard against this, set your
volume to a safe level before your hearing
adapts and leave it there.
q Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain
readily operable.
Warning
• Never remove the casing of this apparatus.
• Never lubricate any part of this apparatus.
• Never place this apparatus on other electrical
equipment.
• Keep this apparatus away from direct sunlight,
naked flames or heat.
To establish a safe volume level:
•
•
Set your volume control at a low setting.
Slowly increase the sound until you can
hear it comfortably and clearly, without
distortion.
• Never look into the laser beam inside this
Listen for reasonable periods of time:
apparatus.
•
Prolonged exposure to sound, even
at normally ‘safe’ levels, can also cause
hearing loss.
• Ensure that you always have easy access to the
power cord, plug or adaptor to disconnect this
apparatus from the power.
•
Be sure to use your equipment
reasonably and take appropriate breaks.
Mains fuse
Be sure to observe the following guidelines
when using your headphones.
This information applies only to products with
a UK mains plug.
•
•
•
•
Listen at reasonable volumes for
reasonable periods of time.
This product is fitted with an approved
molded plug. If you replace the fuse, use one
with:
Be careful not to adjust the volume as
your hearing adapts.
Do not turn up the volume so high that
you can’t hear what’s around you.
•
•
•
the ratings shown on the plug,
a BS 1362 approval, and
You should use caution or temporarily
discontinue use in potentially hazardous
situations. Do not use headphones while
operating a motorized vehicle, cycling,
skateboarding, etc.; it may create a traffic
hazard and is illegal in many areas.
the ASTA approval mark.
Contact your dealer if you are not sure about
what type of fuse to use.
Caution: To conform with the EMC directive
(2004/108/EC), do not detach the plug from
the power cord.
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Environmental information
Notice
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and
old equipment.
This product complies with the radio
interference requirements of the European
Community.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
The making of unauthorized copies of
copy-protected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European Directive
2002/96/EC.
Please inform yourself about the local separate
collection system for electrical and electronic
products.
“Made for iPod,” “Made for iPhone,” and
“Made for iPad” mean that an electronic
accessory has been designed to connect
specifically to iPod, iPhone, or iPad,
respectively, and has been certified by the
developer to meet Apple performance
standards. Apple is not responsible for the
operation of this device or its compliance
with safety and regulatory standards. Please
note that the use of this accessory with
iPod, iPhone, or iPad may affect wireless
performance.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste. Correct disposal of
your old product helps to prevent potential
negative consequences for the environment
and human health.
iPod and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries. iPad
is a trademark of Apple Inc.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.Please inform yourself about the local
rules on separate collection of batteries
because correct disposal helps to prevent
negative consequences for the environmental
and human health.
This apparatus includes this label:
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
• The type plate is located on the bottom of the
apparatus.
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Your Micro
System
Congratulations on your purchase, and
welcome to Philips!To fully benefit from the
support that Philips offers, register your product
Introduction
With this unit, you can enjoy audio from disc,
USB devices, iPod players, iPhone and other
external devices, or listen to radio stations.
The unit offers Digital Sound Control (DSC)
and Dynamic Bass Boost (DBB).
The unit supports the following media formats:
What’s in the box
Check and identify the contents of your
package:
•
•
•
•
•
•
•
•
Main unit
2 x Speakers
Remote control
FM antenna
MP3 link cable
Quick start guide
User manual
8 x Rubber stoppers for speakers
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of the main unit
Top and front view
g
h
i
a
b
c
d e
f
j
o
k
l
n
m
c
/
a
•
•
•
•
Skip to the previous/next track.
Search within a track/disc/USB.
Tune to a radio station.
•
Turn on the unit, or switch to
standby mode.
b PRESET +/-
•
•
Select a preset radio station.
Skip to the previous/next album.
Navigate through iPod/iPhone/iPad
menu.
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Adjust time.
j VOLUME + / -
d
•
Adjust volume.
•
•
Stop play.
k Display panel
Erase a program.
•
Show current status.
e SOURCE
l Disc compartment
m MP3-LINK
•
Select a source: CD, FM TUNER,
USB, DOCK, AUX IN, or MP3 LINK.
•
Connect external audio device.
f
n
•
Open/close the disc compartment.
•
Headphone socket.
g Dock for iPod/iPhone/iPad
o STANDBY
h
•
•
USB socket.
i
Start or pause play.
Back view
d
c
a
b
a AUX IN
•
Connect an external audio device.
b SPEAKER OUT
•
Connect the speakers.
c AC MAIN~
•
Power supply socket.
d FM ANTENNA
•
Improve FM reception.
10 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Search within a track/disc/USB.
Overview of the remote
control
Navigate through iPod/iPhone/iPad
menu.
•
Adjust time.
f OK
a
•
g RDS
•
Confirm a selection.
b
c
d
e
For selected FM radio stations:
display RDS information.
s
h
•
Stop play or erase a program.
Start or pause play.
f
i
•
g
h
i
r
q
j VOL -/+
•
Adjust volume.
k Numeric keypad
j
k
•
•
Select a track from a disc directly.
Select a preset radio station.
l REPEAT/SHUFFLE
•
Play a track or all tracks repeatedly.
l
m
p
o
n
•
m DBB
•
Play tracks randomly.
Turn on/off dynamic bass
enhancement.
n DSC
•
Select a preset sound setting.
a
o DIM
•
Turn on the unit, or switch to
standby mode, or switch to Eco
Power standby.
•
•
Adjust brightness of display panel.
Turn off LED light around VOLUME
knob.
b SOURCE
Select a source: CD, FM TUNER,
p PROG
•
•
•
Program tracks.
USB, DOCK, AUX-IN, or MP3 LINK.
Program radio stations.
Mute or restore volume.
c DISPLAY
q
•
Select display information during play.
•
d PRESET/ALBUM /
r MENU
•
•
Skip to the previous/next album.
•
Access iPod/iPhone/iPad menu.
Select a preset radio station.
s SLEEP/TIMER
e
/
•
•
Set the sleep timer.
Set the alarm timer.
•
•
Skip to the previous/next track.
Tune to a radio station.
EN 11
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Get started
Connect FM antenna
Tip
Caution
• For optimal reception, fully extend and adjust
the position of the antenna.
• Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Connect the supplied FM antenna to the FM
ANTENNA jack on the main unit.
Always follow the instructions in this chapter in
sequence.
Connect power
If you contact Philips, you will be asked for the
model and serial number of this apparatus.The
model number and serial number are on the
rear of the apparatus.Write the numbers here:
Caution
• Risk of product damage! Ensure that the power
voltage corresponds to the voltage printed on
the back or underside of the apparatus.
Model No. __________________________
Serial No. ___________________________
• Risk of electric shock! When you unplug the
AC adaptor, always pull the plug from the
socket. Never pull the cord.
Connect speakers
• Before connecting the AC adaptor, ensure you
have completed all other connections.
Note
Connect the power adaptor to:
• For optimal sound, use the supplied speakers
only.
• Connect only speakers with impedance that is
the same or higher than the supplied speakers.
Refer to the Specifications section of this
manual.
•
the AC MAIN~ jack on the main
unit.
•
the wall outlet.
AUX IN
ANTENNA
Insert the speaker wires completely into the
speaker input sockets on the back of the unit.
L
AC MAIN
~
FM
R
AC MAIN
~
SPEAKER OUT
R+
R-
L+
L-
12 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Prepare the remote control
Set clock
1
In standby mode, press CLOCK/
Caution
DISPLAY on the remote control to
activate the clock setting mode.
» The hour digits are displayed and begin
to blink.
• Risk of explosion! Keep batteries away from
heat, sunshine or fire. Never discard batteries
in fire.
2
3
Press
/
to set the hour.
To insert the remote control battery:
Press CLOCK/DISPLAY.
» The minute digits are displayed and
begin to blink.
1
2
Open the battery compartment.
Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
4
5
Press
/
to set the minute.
3
Close the battery compartment.
Press CLOCK/DISPLAY to confirm.
a
Turn on
Press .
» The unit switches to the last selected
source.
b
Switch to standby
Press again to switch the unit to standby
mode.
» The clock (if set) appears on the
display panel.
c
Switch to ECO standby mode:
Press and hold for more than 3 seconds.
» [ECO STANDBY] (Eco standby) is
displayed for 3 seconds and then
disappeared.
Tip
Note
• The unit switches to Eco Power Standby mode
after 15 minutes in standby mode.
• If you are not going to use the remote control
for a long time, remove the batteries.
• Do not use old and new or different types of
Switch between standby mode and ECO
standby mode:
batteries in combination.
• Batteries contain chemical substances, so they
should be disposed of properly.
Press and hold for more than 2 seconds.
EN 13
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Play
Play iPod/iPhone/iPad
When the iPod/iPhone/iPad is docked on this
Micro System, you can listen to music from the
speakers.
Play a disc
1
Press SOURCE repeatedly to select CD
source.
Note
• No audio output from the headphone jack in
this situation.
2
3
Press to open the disc compartment.
Insert a disc with the printed side facing
upward.
Compatible iPod/iPhone/iPad
4
5
Press to close the disc compartment.
Play starts automatically.If not, press
.
Apple iPod, iPhone and iPad models with a
30-pin dock connector:
•
iPod classic, iPod touch, iPod nano, iPod
5th generation (video), iPod with color
display, iPod mini.
Play from USB
Note
•
•
iPhone, iPhone 3G, iPhone 3GS, iPhone 4.
iPad (WiFi), iPad (3G).
•
Ensure that the USB device contains playable
audio content.
Play an iPod/iPhone/iPad
1
Insert the USB device into the
socket.
Note
• When an iPod/iPhone/iPad player is loaded,
the unit switches to iPod source automatically.
2
Press SOURCE repeatedly to select the
USB source.
1
2
Push to open the dock compartment.
» Play starts automatically. If not, press
.
Place the iPod/iPhone/iPad player in the
dock. Press SOURCE repeatedly to select
DOCK source.
•
•
To select a folder, press PRESET +/-.
To select an audio file, press
/
.
14 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
» The connected iPod/iPhone/iPad plays
Program radio stations manually
automatically.
•
•
•
To pause/resume play, press
To skip to a track, press
To search during play, press and hold
, then release to resume normal play.
.
You can program a maximum of 20 preset
radio stations (FM).
/
.
1
2
Tune to a radio station.
/
Press PROG to activate program mode.
» [PROG] (program) is displayed.
Charge the iPod/iPhone/iPad
3
4
Press PRESET +/- to allocate a number
to this radio station, then press PROG to
confirm.
Note
Repeat the above steps to program other
stations.
• iPod with color display, iPod classic, and iPod with
video are not compatible with dock charging.
Tip
When the unit is connected to power, the
docked iPod/iPhone/iPad begins to charge.
• To overwrite a programmed station, store
another station in its place.
Listen to radio
Tune to a radio station
Select a preset radio station
In tuner mode, press PRESET +/- to select a
preset number.
1
Press SOURCE repeatedly to select the
tuner source.
•
You can also press the numeric buttons
to select a preset number directly.
2
Press and hold
seconds.
/
for more than 2
» [SEARCH] (search) is displayed.
Tip
» The radio tunes to a station with
• Position the antenna as far as possible from
TV, VCR or other radiation source.
strong reception automatically.
• For optimal reception, fully extend and adjust
the position of the antenna.
3
Repeat step 2 to tune to more stations.
Tip
• To tune to a weak station, press
/
Show RDS information
repeatedly until you find optimal reception.
RDS (Radio Data System) is a service that
allows FM stations to show additional
information. If you tune to an RDS station, an
RDS icon and the station name are displayed.
Program radio stations automatically
You can program a maximum of 20 preset
radio stations (FM).
1
2
Tune to an RDS station.
Press RDS repeatedly to scroll through
the following information (if available):
» Station name
» Program type such as [NEWS] (news),
[SPORT] (sport), [POP M] (pop
music)...
In the tuner mode, press and hold PROG for
more than 2 seconds to activate automatic
program mode.
» AUTO SCAN (auto scan) is displayed.
» All available stations are programmed in
» RDS RT
the order of waveband reception strength.
» Frequency
» The first programmed radio station is
broadcast automatically.
EN 15
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
Repeat steps 2 to 3 to program more
tracks.
5 Play options
Press
to play the programmed tracks.
» During play, [PROG] (program) is
Pause/resume play
displayed.
•
To erase the program, in the stop
position, press
During play, press
to pause/resume play.
.
Skip to a track
For CD:
Display time
Press DISPLAY to display time.
Press
/
to select another track.
•
To select a track directly, you can
also press a key on the numerical
keypad.
Tip
• In Eco Standby mode, time is displayed for 15
minutes.
For MP3 disc and USB:
1
Press PRESET +/-to select an album or a
folder.
Select repeat/shuffle play
options
2
Press
/
to select a track or a file.
1
During play, press REPEAT/SHUFFLE
repeatedly to select a repeat option or
the shuffle play mode.
Search within a track
1
2
During play, press and hold
/
.
•
•
•
•
REP: the current track is played
repeatedly.
Release to resume normal play.
REP ALL: all tracks are played
repeatedly.
Program tracks
REP ALB: all tracks in this album are
played repeatedly.
Note
SHUF: all tracks are played randomly.
• You can program tracks only when the play
stops.
2
To resume normal play, press
REPEAT/SHUFFLE repeatedly until no
option is displayed.
You can program a maximum of 20 tracks.
1
Press PROG to activate the program
mode.
» [PROG] (program) is displayed.
2
3
For MP3/WMA tracks, press PRESET +/-
to select an album.
Press
/
to select a track, then press
PROG to confirm.
16 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Adjust sound
Adjust volume
During play, press VOL +/- to increase/decrease
the volume.
Select a preset sound effect
During play, press DSC repeatedly to select:
•
•
•
•
[ROCK] (rock)
[JAZZ] (jazz)
[CLASSIC] (classic)
[POP] (pop)
Enhance bass
During play, press DBB to turn on or off
dynamic bass enhancement.
» If DBB is activated, DBB is displayed.
Mute sound
During play, press to mute/unmute sound.
EN 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Activate and deactivate the alarm
timer
7 Other features
Press TIMER repeatedly to activate or
deactivate the timer.
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
» If the timer is activated, the display
shows
.
» If the timer is deactivated,
When the unit is turned on, press SLEEP
repeatedly to select a set period of time (in
minutes).
disappears on the display.
Note
» When sleep timer is activated, the
display shows [SLEEP](sleep)
.
• If DISC/USB/iPhone/iPod/iPad source is
selected and the track cannot be played, tuner
is activated automatically.
To deactivate sleep timer
Press SLEEP repeatedly until “OFF” is displayed.
» When sleep timer is deactivated,
[SLEEP](sleep) disappears on the
display.
Play from external audio
device
Set the alarm timer
This unit can be used as an alarm clock.The
DISC,TUNER, USB or iPhone/iPod/iPad is
activated to play at a preset time.
You can play from an external audio device
such as MP3 player through this unit.
1
Connect the audio device.
•
For audio device with red/white
audio output sockets:
1
Ensure that you have set the clock
correctly.
Connect a red/white audio cable
(not supplied) to the AUX-IN
sockets and to the audio output
sockets on the audio device.
2
3
4
Press and hold TIMER.
Press SOURCE to select a source.
Press TIMER to confirm.
» The hour digits are displayed and begin
to blink.
•
For audio device with headphone
sockets:
Connect the supplied MP3-Link
cable to the MP3-LINK socket and
to the headphone socket on the
audio device.
5
6
Press
/
to set the hour.
Press TIMER to confirm.
» The minute digits are displayed and
begin to blink.
2
3
Press SOURCE to select MP3-
LINK/AUX-IN source.
7
8
Press
/
to set the minute.
Play the device.
Press TIMER to confirm.
» The timer is set and activated.
Adjust display brightness
Press DIM repeatedly to select different levels
of display brightness:
•
•
•
High brightness
Mid brightness
Low brightness
18 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
General information
8 Product
information
AC power
220-240V ~ 50/60 Hz
Operation Power
Consumption
60 W
Standby Power
Consumption
Eco Power Standby < 0.5 W
Power Consumption
USB Direct
Dimensions
< 12 W
Note
• Product information is subject to change
without prior notice.
Version 1.1
- Main Unit (W x H 239 x 141.5 x 230 mm
x D)
Specifications
Amplifier
- Speaker
Weight
142 x 307 x 230 mm
Total output power 2 x 60 W RMS
- Main Unit
- Speaker
- Package
1.92 kg
Frequency
response
80 Hz - 16 kHz, ± 3 dB
2.55 kg x 2
1.8 kg
Signal to noise ratio > 60 dB
MP3 link input
0.5 V RMS 20 k
USB playability information
Compatible USB devices:
Disc
Laser type
Disc diameter
Support disc
Semiconductor
12 cm /8 cm
CD-DA, CD-R,
CD-RW, MP3-CD,
WMA-CD
24 Bits / 44.1 kHz
< 1.5%
•
•
•
USB flash memory (USB 1.1)
USB flash players (USB 1.1)
memory cards (requires an additional
card reader to work with this unit)
Supported formats:
Audio DAC
Total harmonic
distortion
Frequency
response
Signal to noise ratio > 55 dBA
•
USB or memory file format FAT12,
FAT16, FAT32 (sector size: 512 bytes)
•
MP3 bit rate (data rate): 32-320 Kbps and
variable bit rate
60 Hz -16 kHz
(44.1 kHz)
•
•
WMA v9 or earlier
Directory nesting up to a maximum of 8
levels
•
•
•
•
Number of albums/ folders: maximum 99
Number of tracks/titles: maximum 999
ID3 tag v2.0 to v2.3
Tuner
Tuning range
Tuning grid
Number of presets
FM: 87.5 - 108 MHz
50 KHz
20
File name in Unicode UTF8 (maximum
length: 16 bytes)
Speakers
Speaker impedance
2 x 60 W, 4 OHM
EN 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Supported MP3 disc formats
•
•
ISO9660, Joliet
Maximum title number: 999 (depending
on file name length)
•
•
Maximum album number: 99
Supported sampling frequencies: 32 kHz,
44.1 kHz, 48 kHz
•
Supported Bit-rates: 32~320 (kbps),
variable bit rates
Maintenance
Clean the cabinet
•
Use a soft cloth slightly moistened with
a mild detergent solution. Do not use
a solution containing alcohol, spirits,
ammonia or abrasives.
Clean discs
•
When a disc becomes dirty, clean it with
a cleaning cloth. Wipe the disc from the
centre out.
•
•
Do not use solvents such as benzene,
thinner, commercially available cleaners,
or antistatic spray intended for analogue
records.
Clean the disc lens
After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure
good play quality, clean the disc lens
with Philips CD lens cleaner or any
commercially available cleaner. Follow the
instructions supplied with cleaner.
20 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Reduce the distance between the remote
control and the unit.
9 Troubleshooting
Insert the battery with its polarities (+/–
signs) aligned as indicated.
•
•
Replace the battery.
Warning
Aim the remote control directly at the
sensor on the front of the unit.
• Never remove the casing of this apparatus.
No disc detected
To keep the warranty valid, never try to repair
the system yourself.
•
•
•
Insert a disc.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
philips.com/welcome).When you contact
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
Check if the disc is inserted upside down.
Wait until the moisture condensation at
the lens has cleared.
•
•
Replace or clean the disc.
Use a finalized CD or correct format disc.
Cannot display some files in USB device
•
The number of folders or files in the USB
device has exceeded a certain limit. This
phenomenon is not a malfunction.
No power
•
•
•
Ensure that the AC power cord of the
unit is connected properly.
•
The formats of these files are not
supported.
Ensure that there is power at the AC
outlet.
USB device not supported
As a power-saving feature, the system
switches off automatically 15 minutes
after track play reaches the end and no
control is operated.
•
The USB device is incompatible with the
unit. Try another one.
Poor radio reception
•
Increase the distance between the unit
and your TV or VCR.
No sound or poor sound
•
•
•
Adjust the volume.
•
•
Fully extend the FM antenna.
Disconnect the headphones.
Connect an outdoor FM antenna instead.
Check that the speakers are connected
correctly.
Timer does not work
•
Check if the stripped speaker wires are
clamped.
•
•
Set the clock correctly.
Switch on the timer.
No response from the unit
Clock/timer setting erased
•
Disconnect and reconnect the AC power
plug, then turn on the unit again.
•
Power has been interrupted or the power
cord has been disconnected.
•
As a power-saving feature, the system
switches off automatically 15 minutes
after track play reaches the end and no
control is operated.
•
Reset the clock/timer.
Remote control does not work
•
Before you press any function button,
first select the correct source with the
remote control instead of the main unit.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2012 Koninklijke Philips Electronics N.V.
All rights reserved.
DCM3020_UM_12_Book 1_V3.0
Download from Www.Somanuals.com. All Manuals Search And Download.
|