Always there to help you
Register your product and get support at
BTB7150
Question?
Contact
Philips
User manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
7 Product information
Specifications
16
16
17
17
18
1 Important
2
2
Safety
USB playability information
Supported MP3 disc formats
RDS program types
2 Your micro system
Introduction
4
4
4
5
6
What's in the box
Overview of the main unit
Overview of the remote control
8 Troubleshooting
9 Notice
18
20
3 Get started
Connect speakers
Connect FM antenna
Connect power
7
7
7
7
8
8
8
8
Prepare the remote control
Demonstrate the features
Set clock
Turn on
4 Play
9
9
Play from disc
Play from USB
9
Control play
Skip to a track
Program tracks
Play from Bluetooth-enabled devices
10
10
10
10
5 Listen to the radio
Listen to DAB+ radio
Listen to FM radio
12
12
14
6 Other features
Set the alarm timer
15
15
15
15
16
Set the sleep timer
Listen to an external device
Listen through a headphone
EN
1
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the device.
Only use attachments/accessories specified
by the manufacturer.
Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer or sold with the device.
When a cart is used, use caution when
moving the cart/device combination to
avoid injury from tip-over.
1 Important
•
•
Safety
This 'bolt of lightning' indicates uninsulated
material within the device may cause an
electrical shock. For the safety of everyone in
your household, please do not remove the
covering.
The 'exclamation mark' calls attention to
features for which you should read the enclosed
literature closely to prevent operating and
maintenance problems.
WARNING:To reduce the risk of fire or electric
shock, the device should not be exposed to rain
or moisture and objects filled with liquids, such
as vases, should not be placed on the device.
CAUTION:To prevent electric shock, fully
insert the plug. (For regions with polarized
plugs:To prevent electric shock, match wide
blade to wide slot.)
•
•
Unplug this device during lightning storms
or when unused for long periods of time.
Refer all servicing to qualified service
personnel. Servicing is required when the
device has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or objects have
fallen into the device, the device has been
exposed to rain or moisture, does not
operate normally, or has been dropped.
Battery usage CAUTION -To prevent
battery leakage which may result in bodily
injury, property damage, or damage to the
unit:
•
•
•
•
Install all batteries correctly, + and - as
marked on the unit.
Do not mix batteries (old and new or
carbon and alkaline, etc.).
Batteries (packed or installed) shall not
be exposed to excessive heat such as
sunshine, fire or the like.
Remove batteries when the unit is not
used for a long time.
Important Safety Instructions
•
•
•
•
•
Follow all instructions.
Heed all warnings.
Do not use this device near water.
Clean only with dry cloth.
Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
Do not install near any heat sources such
as radiators, heat registers, stoves, or other
devices (including amplifiers) that produce
heat.
•
•
•
The device shall not be exposed to
dripping or splashing.
Do not place any sources of danger on
the device (e.g. liquid filled objects, lighted
candles).
•
2
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
To establish a safe volume level:
•
•
Set your volume control at a low setting.
Slowly increase the sound until you can
hear it comfortably and clearly, without
distortion.
Warning
Listen for reasonable periods of time:
•
Prolonged exposure to sound, even
at normally 'safe' levels, can also cause
hearing loss.
Be sure to use your equipment reasonably
and take appropriate breaks.
• Never remove the casing of this device.
• Never lubricate any part of this device.
• Never place this device on other electrical equipment.
• Keep this device away from direct sunlight, naked
flames or heat.
• Never look into the laser beam inside this device.
• Ensure that you always have easy access to the power
cord, plug, or adaptor to disconnect this device from
the power.
•
Be sure to observe the following guidelines
when using your headphones.
•
•
•
•
Listen at reasonable volumes for
reasonable periods of time.
Be careful not to adjust the volume as your
hearing adapts.
Do not turn up the volume so high that
you can’t hear what’s around you.
You should use caution or temporarily
discontinue use in potentially hazardous
situations.
Hearing safety
•
Do not use headphones while operating
a motorized vehicle, cycling, skateboarding,
etc.; it may create a traffic hazard and is
illegal in many areas.
Caution
• To prevent possible hearing damage, do not listen at
high volume levels for long periods.
Listen at a moderate volume:
•
Using headphones at a high volume can
impair your hearing.This product can
produce sounds in decibel ranges that may
cause hearing loss for a normal person,
even for exposure less than a minute.The
higher decibel ranges are offered for those
that may have already experienced some
hearing loss.
•
Sound can be deceiving. Over time your
hearing 'comfort level' adapts to higher
volumes of sound. So after prolonged
listening, what sounds 'normal' can actually
be loud and harmful to your hearing.To
guard against this, set your volume to a safe
level before your hearing adapts and leave
it there.
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Your micro
system
What's in the box
Check and identify the contents of your
package:
•
•
•
•
•
•
•
•
Main unit
2 x speakers
Congratulations on your purchase, and
welcome to Philips!To fully benefit from the
support that Philips offers, register your product
Before using your product, read all
accompanying safety information.
2 x speaker cables
2 x AC power cords
1 x aerial
Remote control (with one AAA battery)
Short user manual
Safety and notice
To download the full user manual, visit
Introduction
With this unit, you can:
•
enjoy audio from discs, Bluetooth-enabled
devices, USB storage devices, or other
external devices;
SOURCE
INFO
RDS
PRESET/ALBUM
SCAN
Always there to help you
Register your product and get support at
Question?
Contact
Philips
MENU
•
listen to Digital Audio Broadcasting (DAB)
or FM radio stations.
VOL
DIM
SHUFFLE
MUTE
REPEAT
PROG
TIMER
SLEEP
SOUND
CLOCK
You can enrich sound output with below
sound effects:
•
•
TREBLE
BASS
The unit supports these media formats:
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of the main unit
n
m
a
b
l
k
c
d
j
i
e
f
h
g
a
h
i
/
•
•
Turn the unit on or off.
Switch to standby mode or Eco
standby mode.
•
•
•
•
Skip to the previous/next track.
Search within a track/disc/USB.
Tune to a radio station.
Adjust time.
•
Bluetooth indicator.
b Disc compartment
•
Headphone socket.
c
•
USB socket.
j BASS
•
Adjust bass level.
d AUDIO IN
•
Audio input jack (3.5mm) for an
external audio device.
k TREBLE
•
•
Adjust treble level.
e SRC
l
•
Select a source: DISC, USB, DAB,
Open/close the disc compartment.
TUNER, BT,AUDIO IN.
m VOLUME
Adjust volume.
f
g
•
•
•
Start, pause, or resume play.
Stop play or erase a program.
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
n NFC area
Touch with a Near Field
d PRESET/ALBUM
/
•
•
Select a preset radio station.
Communication (NFC) compatible
device to set up Bluetooth connection
automatically.
•
Skip to previous/next album.
e
/
•
•
•
•
Skip to the previous/next track.
Search within a track/disc/USB.
Tune to a radio station.
Adjust time.
Overview of the remote
control
f VOL +/-
•
Adjust volume.
a
b
g MUTE
•
Mute or restore volume.
r
h SOUND
SOURCE
INFO
•
Adjust BASS orTREBLE level.
c
PRESET/ALBUM
RDS
SCAN
q
p
i CLOCK
d
•
Set the clock.
•
View clock information.
e
j SLEEP/TIMER
MENU
o
n
m
l
k
•
Set sleep timer.
•
Set alarm timer.
VOL
f
k PROG
DIM
•
Program tracks.
SHUFFLE
PROG
MUTE
REPEAT
•
Program radio stations.
g
h
i
TIMER
SLEEP
SOUND
CLOCK
l REPEAT/SHUFFLE
•
Select repeat or shuffle play mode.
j
m DIM
•
•
Adjust display brightness.
n
o
Start, pause, or resume play.
a
•
•
Turn the unit on or off.
Switch to standby mode or Eco power
standby mode.
/MENU
•
•
Stop play or erase a program.
Access DAB+ or FM menu.
b SOURCE
Select a source: DISC, USB, DAB,
TUNER, BT,AUDIO IN.
p OK
•
•
Confirm a selection.
q SCAN
c INFO/RDS
•
•
Scan FM or DAB+ radio stations.
•
Display current status or the disc
r
information.
Press to open or close the disc
compartment.
•
For selected FM radio stations, display
RDS information.
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Get started
Connect FM antenna
Connect the supplied aerial to this device
before listening to the radio.
Caution
• Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
SPEAKER OUT
If you contact Philips, you will be asked for the
model and serial number of this apparatus.The
model number and serial number are on the
back of the apparatus.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Connect speakers
Note
Connect power
• For optimal sound, use the supplied speakers only.
• Connect only speakers with impedance that is the
same or higher than the supplied speakers. Refer to the
Specifications section of this manual.
Caution
• Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the unit.
• Risk of electric shock! When you unplug the AC power
cord, always pull the plug from the socket. Never pull
the cord.
• Before you connect the AC power cord, ensure that
you have completed all other connections.
SPEAKER OUT
1
2
3
SPEAKER OUT
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Repeat steps 2-3 to set hour and minute.
Prepare the remote control
Note
Caution
• If no button is pressed in 90 seconds, the system exits
clock setting mode automatically.
• Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
• Risk of decreased battery life! Never mix different
brands or types of batteries.
• Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
Tip
• You can view clock information in power-on mode by
pressing CLOCK.
To insert the remote control battery:
1 Open the battery compartment.
2 Insert the supplied AAA battery with
correct polarity (+/-) as indicated.
Turn on
3 Close the battery compartment.
Press
.
» The unit switches to the last selected
source.
Switch to standby mode
Press again to switch the unit to standby
mode.
» The clock (if set) is displayed on the panel.
Demonstrate the features
In standby mode, press and hold for three
seconds to demonstrate features of this device.
» The features are displayed one by one
across the display panel.
Switch to ECO standby mode:
Press and hold for more than two seconds.
» The display panel is dimmed.
•
To turn off the demonstration, press
again.
Note
• The unit switches to Eco Power Standby mode after 3
hours in standby mode.
Set clock
Switch between standby mode and ECO
standby mode:
Press and hold for more than two seconds.
1 In standby mode, press and hold CLOCK
on the remote control for three seconds.
» [24H] or [12H] hour format is
displayed.
2 Press
/
to select [24H] or [12H]
hour format.
3 press CLOCK to confirm.
» The hour digits are displayed and begin
to blink.
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Play
SOURCE
INFO
RDS
SOURCE
PRESET/ALBUM
SCAN
MENU
VOL
DIM
SHUFFLE
MUTE
REPEAT
PROG
TIMER
SLEEP
SOUND
CLOCK
Play from disc
1 Press SOURCE repeatedly to select DISC
source.
2 Press to open the disc compartment.
3 Insert a disc with printed side facing
upward.
4 Press to close the disc compartment.
» Play starts automatically. If not, press
.
Charge your device
You can charge your device through the USB
socket on this product with a USB cable (not
supplied).
SOURCE
INFO
SOURCE
PRESET/ALBUM
RDS
SCAN
MENU
VOL
DIM
SHUFFLE
MUTE
REPEAT
PROG
TIMER
SLEEP
SOUND
CLOCK
Note
• The maximum current for USB charging is 1 A.
• All devices for USB charging are not guaranteed.
Play from USB
Note
• Make sure that the USB device contains playable audio
content.
1 Press SOURCE repeatedly to select USB
source.
2 Insert a USB device into the
socket.
» Play starts automatically. If not, press
.
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
2 For MP3 tracks, press
/
to select an
Control play
album.
3 Press
/
to select a track, and then
/
Select a folder.
press PROG to confirm.
/
Select an audio file.
Pause or resume play.
Stop play.
4 Repeat steps 2-3 to program more tracks.
5 Press
to play the programmed tracks.
» During play, [PROG] (program) is
REPEAT/
Select an available play mode.
displayed.
SHUFFLE • [REPEAT ONE] (repeat one):
repeat the current track
• [REPEAT ALB] (repeat album):
repeat the current album
• [REPEAT ALL] (repeat all):
repeat all tracks
•
To erase the program, in the stop
position, press
.
Play from Bluetooth-enabled
devices
• [SHUFFLE] (shuffle): play tracks
randomly
• [OFF] (off): play tracks in
sequence
Note
• Before pairing a device with this system, read its user
manual for Bluetooth compatibility.
• Compatibility with all Bluetooth devices is not
guaranteed.
• Any obstacle between the system and the device can
reduce the operational range.
• The effective operation range between this product
and your Bluetooth enabled device is approximately 10
meters (30 feet).
VOL +/-
MUTE
SOUND
Increase or decrease volume.
Mute or restore sound.
Press SOUND to select treble
or bass mode, and then press
VOL +/- to adjust treble or bass
volume.
Press and hold SOUND for
three seconds to turn on or off
LOUDNESS.
• The unit can memorize up to 8 previously connected
Bluetooth devices.
DIM
Adjust display brightness.
To enjoy music through the speaker wirelessly,
you need to pair your Bluetooth enabled device
with the unit.
Choose your best Bluetooth pairing method
based on the preconditions listed below.
Skip to a track
For CD:
Press
Precondition
Pairing method
Choose Option 1
(recommended)
or Option 2.
/
to select another track.
Your Bluetooth device
supports both Near
Field Communication
(NFC) and Advanced
Audio Distribution Profile
(A2DP).
For MP3 disc and USB:
1 Press
2 Press
/
to select an album or a folder.
/
to select a track or a file.
Your Bluetooth device only Choose Option
supports A2DP. 2.
Program tracks
You can program a maximum of 20 tracks.
1
Press PROG to activate the program mode.
10 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Pair and connect
Option 1: Pair and connect through NFC
Near Field Communication (NFC) is a
technology that enables short-range wireless
communication between various NFC
compatible devices, such as mobile phones and
IC tags.
<2 cm
SOURCE
SOURCE
INFO
RDS
PRESET/ALBUM
SCAN
With the NFC function, data communication
can be achieved easily just by touching the
relevant symbol or designated location on NFC
compatible devices.
ON
PIN
0000
Note
• Compatibility with all NFC devices is not guaranteed.
Option 2: Pair and connect manually
1 Press SOURCE repeatedly to select BT
source.
1 Press SOURCE repeatedly to select BT
source.
» [BT] (Bluetooth) is displayed.
» [BT] (Bluetooth) is displayed.
» The Bluetooth indicator flashes blue.
» The Bluetooth indicator flashes blue.
2 Enable the NFC feature on your Bluetooth
enabled device (see the user manual of the
device for details).
2 On the Bluetooth enabled device, search
for Bluetooth devices that can be paired
(see the user manual of the device).
3 Keep the NFC area of the external device
and the NFC area of this product within
2 cm.
3 Select 'Philips BTB7150' on your
Bluetooth enabled device and input '0000'
as the paring password if necessary.
» After successful pairing and connection,
the Bluetooth indicator turns solid
blue, and the unit beeps.
4 Accept 'PHILIPS BTB7150' pairing for
the first-time use, and input '0000' as the
paring password if necessary.
» After successful pairing and connection,
the Bluetooth indicator turns solid
blue, and the unit beeps.
EN 11
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Listen to the
radio
Tip
• Position the antenna as far as possible fromTV,VCR, or
other radiation source.
• Make sure that you have connected the supplied aerial.
• For optimal reception, fully extended and adjust the
position of the aerial.
SOURCE
SOURCE
INFO
RDS
PRESET/ALBUM
SCAN
Listen to DAB+ radio
PIN
0000
BTB7150
Digital Audio Broadcasting (DAB+) is a way
of broadcasting radio digitally through a
network of transmitters. It provides you with
more choice, better sound quality, and more
information.
Stream music through Bluetooth
•
Play audio on the Bluetooth device
connected to this product.
Tune to DAB+ radio stations
» Audio streams from your Bluetooth
enabled device to the speakers of this
product.
Note
• Make sure that the antenna is fully extended.
To disconnect the Bluetooth-enabled device:
•
•
Deactivate Bluetooth on your device; or
Move the device beyond the
communication range.
Press SOURCE repeatedly to select DAB
source.
» [FULL SCAN] (full scan) is displayed.
To clear Bluetooth pairing history:
» The unit stores all DAB+ radio stations
automatically and broadcasts the first
available station.
•
Pressand hold
eight seconds.
» After successful clearing, beep sounds.
on the main set for
» The station list is memorized in the unit.
Next time when you turn on the unit, the
station scan does not take place.
Play from Philips DigitalRadio application
An application Philips DigitalRadio is available
on Apple App Store and Google Play.
To fully enjoy features of this product, download
and install the application to your smart device.
With this application, after connect your
Bluetooth-enabled device to this product, you
can control DAB, TUNER, BT, and AUDIO IN
play mode from your Bluetooth-enabled device.
Note
• If no DAB+ radio station is found, [NO DAB] (no
DAB) is displayed, then [FULL SCAN] (full scan) is
displayed again.
12 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
To tune to a station from the available station
list:
Select a preset DAB+ radio station
In DAB+ mode, press
/
repeatedly to
In DAB+ mode, press
/
to select a preset
navigate through the available DAB+ stations.
number, and then press OK to confirm..
Store DAB+ radio stations
automatically
Show DAB+ information
While listening to DAB+ radio, press INFO/
RDS repeatedly to scroll through the following
information (if available):
Note
•
•
•
•
•
•
•
•
•
•
•
Station Name
RDSTEXT message
Dynamic Label Segment
ProgramType
Ensemble Name
Frequency
Signal error rate
Bit rate
Audio status (DAB, DAB+)
Time
• New stations and services will be added in DAB+
broadcast from time to time.To make new DAB+
stations and services available, perform full scan
regularly.
In DAB+ mode, press SCAN.
» The unit scans and stores all the available
DAB+ radio stations, and broadcasts the
first available station.
Date
Store DAB+ radio stations manually
Use DAB+ menu
Note
In DAB+ mode, press MENU to access DAB+
menu.
• You can store a maximum of 20 preset DAB+ radio
stations.
1 Press
/
to scroll the menu options:
•
•
•
•
[Full scan] (full scan): scan and store all
the available DAB+ radio stations.
[Manual] (manual): tune to a DAB+
station manually.
1 Tune to a DAB+ radio station.
2 Press PROG for three seconds to activate
the storing mode.
3 Press
/
to select a channel.
[Prune] (prune): remove all the invalid
stations from the station list.
[System] (system): adjust system
settings.
4 Press PROG to confirm.
» The name of the preset station is
displayed.
2 To select an option, press OK.
5 Repeat above steps to store more DAB+
3 If a sub-option is available, repeat steps
stations.
2- 3.
[System] (system)
Note
•
•
•
[Reset] (reset): reset all settings to factory
default.
[BT RESET] (Bluetooth reset): reset
Bluetooth settings to factory default.
[UPGRADE] (upgrade): upgrade software
if available.
• To remove a pre-stored DAB+ radio station, store
another station in its place.
EN 13
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
[BT UPGRADE] (Bluetooth upgrade):
upgrade Bluetooth software if available.
[SWVER] (software version): show the
software version of this unit.
4 In FM tuner mode, press SCAN.
» The stations scanned are based on the
selection in step 2.
» The unit broadcasts the first scanned
FM radio stations.
Note
• If no button is pressed within 30 seconds, the menu
exits.
Store FM radio stations manually
1 Tune to an FM radio station.
2 Press PROG to activate programming
mode.
» [PROG] (program) blinks.
Listen to FM radio
3 Press
/
repeatedly to select a number.
Tune to a radio station
4 Press PROG again to confirm.
» The frequency of the preset station is
displayed.
1 Press SOURCE repeatedly to select tuner
source.
5 Repeat above steps to store more FM
2 Press and hold
/
for three seconds.
stations.
» The radio tunes to a station with
strong reception automatically.
Note
3 Repeat step 2 to tune to more stations.
To tune to a weak station:
• To remove a pre-stored station, store another station
in its place.
Press
/
repeatedly until you find optimal
reception.
Select a preset radio station
Store FM radio stations automatically
In FM mode, press
number, and then press OK to confirm.
/
to select a preset
Note
• You can program a maximum of 20 preset radio
stations (FM).
Show RDS information
Radio Data System (RDS) is a service
that allows FM stations to show additional
information.
1 In tuner mode, press MENU to access FM
tuner menu.
» [SCAN] is displayed.
1 Tune to an RDS station.
2 Press OK, and then press
/
to scroll
2 Press RDS/INFO repeatedly to scroll
through the following information (if
available).
the menu options:
•
[Strong] (strong stations): scan stations
with strong signals only.
•
•
•
•
Radio text message
Program type
Frequency
•
[All] (all stations): scan all available FM
radio stations.
3 Press OK to select an option.
Stereo or Mono
14 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
6 Other features
• If DISC/USB source is selected, but no disc is placed
or no USB connected, the system switches to tuner
source automatically.
Set the alarm timer
Set the sleep timer
This unit can be used as an alarm clock.You can
select DISC, TUNER, DAB, or USB as alarm
source.
To set the sleep timer, in turn on mode, press
SLEEP/TIMER repeatedly to select a set period
of time (in minutes).
» When sleep timer is activated, is
displayed. Otherwise, disappears.
Note
• Make sure that you have set the clock correctly.
1 In standby mode, press and hold SLEEP/
TIMER for three seconds.
Listen to an external device
» [SETTIMER] is displayed, and then
[DISC] is displayed and begins to blink.
You can listen to an external device through this
unit with an audio cable.
2 Press
/
(or SOURCE) repeatedly
1 Press SOURCE repeatedly to select
to select an alarm source (DISC, TUNER,
AUDIO IN source.
DAB, or USB).
2 Connect an audio cable (not supplied)
3 Press SLEEP/TIMER (or OK) to confirm.
» The hour digits are displayed and begin
to blink.
between:
•
•
AUDIO IN jack (3.5 mm) on the unit;
and the headphone jack on an external
device.
4 Repeat steps 2-3 to set hour, minute, and
adjust volume of the alarm.
3 Start to play the device (see the device
user manual).
Note
• If no button is pressed in 90 seconds, the system exits
timer setting mode automatically.
SOURCE
SOURCE
INFO
PRESET/ALBUM
RDS
SCAN
MENU
VOL
DIM
SHUFFLE
MUTE
REPEAT
PROG
To activate or deactivate the alarm timer:
Press SLEEP/TIMER repeatedly to view the
alarm information and activate or deactivate the
alarm.
TIMER
SLEEP
SOUND
CLOCK
» If timer is activated, is displayed.
AUDIO IN
» If timer is deactivated, [TIMER OFF] (timer
off) is displayed and disappears.
EN 15
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Product
information
Listen through a headphone
Plug a headphone (not supplied) into the
socket on front of this product.
Note
• Product information is subject to change without prior
notice.
Specifications
Amplifier
Maximum Output
Power
150 W
Frequency Response
60 Hz - 16 kHz;
±3 dB
Signal to Noise Ratio
Total Harmonic
Distortion
≥70 dBA
<1%
Aux Input
600 mV RMS
Speakers
Speaker Impedance
Speaker Driver
4 ohm
5.25" woofer +
25 mm tweeter
>84 dB/m/W
Sensitivity
Disc
LaserType
Disc Diameter
Support Disc
Semiconductor
12 cm/8 cm
CD-DA, CD-R, CD-
RW, MP3-CD
24 Bits/44.1 kHz
<1% (1 kHz)
Audio DAC
Total Harmonic
Distortion
Frequency Response
60 Hz - 16 kHz;
±3 dB
S/N Ratio
>70 dBA
16 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
USB
USB DirectVersion
USB Charging
USB playability information
2.0 full speed
1 A
Compatible USB devices:
•
•
•
USB flash memory (USB2.0 or USB1.1)
USB flash players (USB2.0 or USB1.1)
memory cards (requires an additional card
reader to work with this unit)
Bluetooth
Bluetooth version
V2.1 + EDR/support
APT-X
Supported USB formats:
•
•
•
USB or memory file format: FAT12, FAT16,
FAT32 (sector size: 512 bytes)
MP3 bit rate (data rate): 32-320 Kbps and
variable bit rate
Directory nesting up to a maximum of 8
levels
Number of albums/ folders: maximum 99
Number of tracks/titles: maximum 999
ID3 tag v2.0 or later
File name in Unicode UTF8 (maximum
length: 32 bytes)
Frequency band
2.4 GHz ~ 2.48 GHz
ISM Band
10 m (free space)
Range
Tuner (FM)
Tuning Range
Tuning grid
Sensitivity
- Mono, 26 dB S/N
Ratio
- Stereo, 46 dB S/N
Ratio
Search Selectivity
Total Harmonic
Distortion
•
•
•
•
87.5-108 MHz
50 KHz
<22 dBf
<45 dBf
•
FLAC files
Unsupported USB formats:
•
Empty albums: an empty album is an album
that does not contain MP3/WMA files, and
will not be shown in the display.
Unsupported file formats are skipped. For
example, word documents (.doc) or MP3
files with extension .dlf are ignored and
not played.
<30 dBf
<3%
•
Signal to Noise Ratio
>45 dBA
•
•
WMA,AAC,WAV, PCM audio files
DRM protected WMA files (.wav, .m4a,
.m4p, .mp4, .aac)
WMA files in Lossless format
FLAC via USB
General information
AC power
Operation Power
Consumption
Eco Standby Power
Consumption
Dimensions
100-240V~, 50/60 Hz
45 W
•
•
<0.5 W
Supported MP3 disc formats
- Main Unit
230 x 145 x 240 mm
173 x 261 x 241 mm
(W x H x D)
- Speaker Box
(W x H x D)
Weight
- Main Unit
- Speaker Box
•
•
ISO9660, Joliet
Maximum title number: 128 (depending on
file name length)
Maximum album number: 99
Supported sampling frequencies: 32 kHz,
44.1 kHz, 48 kHz
•
•
2.9 kg
2 x 3.1 kg
•
Supported Bit-rates: 32~256 (kbps),
variable bit rates
EN 17
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Troubleshooting
RDS program types
NOTYPE
NEWS
AFFAIRS
INFO
No RDS programme type
Warning
News services
Politics and current affairs
Special information programs
Sports
• Never remove the casing of this device.
SPORT
To keep the warranty valid, never try to repair
the system yourself.
EDUCATE
Education and advanced
training
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page
(www.philips.com/support).When you contact
Philips, make sure that the device is nearby
and the model number and serial number are
available.
DRAMA
CULTURE
SCIENCE
VARIED
Radio plays and literature
Culture, religion and society
Science
Entertainment programs
Pop music
POP M
ROCK M
MOR M
Rock music
Light music
No power
LIGHT M
CLASSICS
OTHER M
WEATHER
FINANCE
CHILDREN
SOCIAL
RELIGION
PHONE IN
TRAVEL
Light classical music
Classical music
Special music programs
Weather
Finance
Children’s programs
Social Affairs
Religion
Phone In
Travel
Leisure
•
•
•
Make sure that the AC power cord of the
device is connected properly.
Make sure that there is power at the AC
outlet.
As a power-saving feature, the system
switches off automatically 15 minutes after
track play reaches the end and no control
is operated.
No sound or poor sound
•
•
Adjust the volume.
Check that the speakers are connected
correctly.
LEISURE
JAZZ
Jazz Music
COUNTRY
NATION M
OLDIES
FOLK M
DOCUMENT Documentary
Country Music
National Music
Oldies Music
•
Check if the stripped speaker wires are
clamped.
No response from the unit
•
Folk Music
Disconnect and reconnect the AC power
plug, then turn on the unit again.
TES
ALARM
AlarmTest
Alarm
Remote control does not work
•
Before you press any function button, first
select the correct source with the remote
control instead of the main unit.
Reduce the distance between the remote
control and the unit.
•
•
•
Insert the battery with its polarities (+/-
signs) aligned as indicated.
Replace the battery.
18 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Aim the remote control directly at the
sensor on the front of the unit.
•
If you pair and connect through NFC,
make sure that:
•
you have enabled both the Bluetooth
and NFC features on your device.
you have kept the NFC area of the
device in touch with that of the
speaker until you heard a beep.
No disc detected
•
•
Insert a disc.
•
Make sure that the disc is inserted with
printed side facing upward.
Wait until the moisture condensation at
the lens has cleared.
•
The paired mobile device connects and
disconnects constantly.
•
•
Replace or clean the disc.
Use a finalized CD or correct format disc.
•
The Bluetooth reception is poor. Move the
device closer to this unit or remove any
obstacle between them.
Some mobile phones may connect and
disconnect constantly when you make
or end calls.This does not indicate any
malfunction of this unit.
For some devices, the Bluetooth
connection may be deactivated
automatically as a power-saving feature.
This does not indicate any malfunction of
this unit.
Cannot display some files in USB device
•
The number of folders or files in the USB
device has exceeded a certain limit.This
phenomenon is not a malfunction.
The formats of these files are not
supported.
•
•
•
USB device not supported
•
The USB device is incompatible with the
unit.Try another one.
Poor radio reception
Timer does not work
•
Increase the distance between the unit and
yourTV orVCR.
Connect and fully extend supplied antenna.
•
•
Set the clock correctly.
Switch on the timer.
•
Clock/timer setting erased
Music playback is unavailable on this unit even
after successful Bluetooth connection.
•
Power has been interrupted or the power
cord has been disconnected. Reset the
clock/timer.
•
The device cannot be used to play music
through this unit wirelessly.
The audio quality is poor after connection
with a Bluetooth-enabled device.
•
The Bluetooth reception is poor. Move the
device closer to this unit or remove any
obstacle between them.
Bluetooth cannot be connected with this unit.
•
The device does not support the profiles
required for this unit.
•
The Bluetooth function of the device is
not enabled. Refer to the user manual of
the device to find out how to enable the
function.
•
•
This unit is not in pairing mode.
This unit is already connected with another
Bluetooth-enabled device. Disconnect that
device and then try again.
EN 19
Download from Www.Somanuals.com. All Manuals Search And Download.
9 Notice
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.Please inform yourself about the local
rules on separate collection of batteries
because correct disposal helps to prevent
negative consequences for the environmental
and human health.
Any changes or modifications made to this
device that are not expressly approved by
WOOX Innovations may void the user’s
authority to operate the equipment.
Environmental information
Hereby,WOOX Innovations declares that
this product is in compliance with the
essential requirements and other relevant
provisions of Directive 1999/5/EC.You
can find the Declaration of Conformity on
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
This item incorporates copy protection
technology that is protected by U.S. patents
and other intellectual property rights of
Rovi Corporation. Reverse engineering and
disassembly are prohibited.
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by WOOX
Innovations is under license.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC.
Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste. Correct disposal of
your old product helps to prevent potential
negative consequences for the environment and
human health.
The N Mark is a trademark or registered
trademark of NFC Forum, Inc. in the United
States and in other countries.
20 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
This apparatus includes this label:
Note
• The type plate is located on the back of the device.
EN 21
Download from Www.Somanuals.com. All Manuals Search And Download.
2014 ©WOOX Innovations Limited.All rights reserved.
This product was brought to the market by WOOX Innovations Limited or one of its affiliates, further referred
to in this document as WOOX Innovations, and is the manufacturer of the product.WOOX Innovations is the
warrantor in relation to the product with which this booklet was packaged. Philips and the Philips Shield Emblem
are registered trademarks of Koninklijke Philips N.V.
BTB7150_10_UM_V2.0
Download from Www.Somanuals.com. All Manuals Search And Download.
|