Register your product and get support at
AS140
User manual
Download from Www.Somanuals.com. All Manuals Search And Download.
k Use only with the cart, stand, tripod,
ꢓꢄꢆꢍꢗꢃꢁꢘꢅꢀꢄꢅꢁꢆꢓꢎꢃꢅꢉꢇꢃꢍꢋ\ꢃꢏꢅꢓꢔꢅꢁꢂꢃꢅ
1 Important
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
Safety
Important Safety Instructions
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
l Unplug this apparatus during lightning
storms or when unused for long periods
of time.
d Follow all instructions.
m ꢙꢃꢕꢃꢄꢅꢆꢎꢎꢅꢉꢃꢄꢚꢋꢍꢋꢌꢐꢅꢁꢀꢅꢛꢈꢆꢎꢋ\ꢃꢏꢅꢉꢃꢄꢚꢋꢍꢃꢅ
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
h Do not install near any heat sources such
as radiators, heat registers, stoves, or
ꢀꢁꢂꢃꢄꢅꢆꢇꢇꢆꢄꢆꢁꢈꢉꢅꢊꢋꢌꢍꢎꢈꢏꢋꢌꢐꢅꢆꢑꢇꢎꢋ\ꢃꢄꢉꢒꢅꢁꢂꢆꢁꢅ
produce heat.
n Apparatus shall not be exposed to
dripping or splashing.
o Do not place any sources of danger on
ꢁꢂꢃꢅꢆꢇꢇꢆꢄꢆꢁꢈꢉꢅꢊꢃꢖꢐꢖꢅꢎꢋꢛꢈꢋꢏꢅ\ꢎꢎꢃꢏꢅꢀꢓꢜꢃꢍꢁꢉꢘꢅ
ꢎꢋꢐꢂꢁꢃꢏꢅꢍꢆꢌꢏꢎꢃꢉꢒꢖꢅ
i Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and the
point where they exit from the apparatus.
p This product may contain lead and
mercury. Disposal of these materials
may be regulated due to environmental
considerations. For disposal or recycling
information, please contact your local
authorities or the Electronic Industries
j Only use attachments/accessories
ꢉꢇꢃꢍꢋ\ꢃꢏꢅꢓꢔꢅꢁꢂꢃꢅꢑꢆꢌꢈꢕꢆꢍꢁꢈꢄꢃꢄꢖ
q Where the plug of the Direct Plug-in
Adapter is used as the disconnect device,
the disconnect device shall remain readily
operable.
2
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Your Docking
System for
Android™
Congratulations on your purchase, and
ꢑꢂꢏꢃꢇꢎꢂꢊꢆꢇꢊꢒꢓꢄꢏꢄꢁꢉꢔꢊꢕꢇꢊꢖꢗꢏꢏꢘꢊꢙꢂꢈꢂ\ꢆꢊꢖꢐꢇꢎꢊꢆꢓꢂꢊ
support that Philips offers, register your product
Introduction
With this docking system, you can:
#ꢊ enjoy audio from your Android-powered
device;
#ꢊ charge your phone through micro USB
connector;
#ꢊ listen to FM radio;
#ꢊ wake up to buzzer alarm, radio, or audio in
your device; and
#ꢊ experience a variety of features brought by
Philips DockStudio and Philips Songbird
app.
What's in the box
Check and identify the contents of your
package:
#ꢊ Main unit
#ꢊ Power adapter
#ꢊ Dock extension
#ꢊ MP3 link cable x 1
#ꢊ Quick start guide
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of the docking
system
g
h
a
b
c
i
d
e
f
j
k
l
o
m
n
a SETTIME/PROG
#ꢊ Set clock.
f Display panel
#ꢊ Show current information.
#ꢊ Store FM radio stations.
g AL1/AL2
b PRESET
/
#ꢊ Set alarm.
#ꢊ Select a preset radio station.
#ꢊ Adjust hour and hour format.
#ꢊ View alarm settings.
#ꢊ Activate or deactivate alarm timer.
c SNOOZE/BRIGHTNESS
#ꢊ Snooze alarm.
h SLEEP
#ꢊ Set sleep timer.
#ꢊ Adjust display brightness.
i TUNING ·
/
d
#ꢊ Tune to FM radio stations.
#ꢊ Adjust minute.
#ꢊ Turn the docking system on or off .
#ꢊ Switch the system to standby mode.
j VOLUME +/-
e SOURCE
#ꢊ Adjust volume.
#ꢊ Select a source: FM tuner, Bluetooth
device, or MP3 link.
k Dock for Android phone
#ꢊ Dock your Android-powered phone.
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
l AL1/AL2 RADIO·BUZZ·DOCK
#ꢊ Select alarm source for Alarm 1 or
Alarm 2.
m MP3 LINK
#ꢊ Connect an external audio device.
n FM ANTENNA
#ꢊ Improve FM reception.
o DC IN
#ꢊ Connect power.
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Switch to standby mode
Press again to switch the docking system to
standby mode.
» [OFF] appears, and then the clock (if set) is
displayed.
3 Get started
Always follow the instructions in this chapter in
sequence.
Connect power
Select a source
Caution
Press SOURCE repeatedly to select a source:
Bluetooth, FM tuner, or MP3 link.
# Risk of product damage! Ensure that the power voltage
corresponds to the voltage printed on the back or
underside of the device.
# Risk of electric shock! When you unplug the power
adapter, always pull the plug from the socket. Never
pull the cord.
Note
# When an android-powered device is docked, the
system automatically switches to Bluetooth mode.
Note
# The type plate is located on the bottom of the docking
system.
Connect the power adapter to:
#ꢊ the DC IN socket of the docking system.
#ꢊ the wall socket.
Turn on
Press .
» The docking system switches to the last
selected source.
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
4 Play and charge
# Before you connect a Bluetooth device to this
docking system, familiarize yourself with the Bluetooth
capabilities of the device.
With this docking system, you can enjoy audio
in two ways:
# Keep this docking system away from other electronic
devices that may cause interference.
#ꢊ through manual Bluetooth connection;
#ꢊ through automatic Bluetooth connection
with Philips DockStudio app.
1 On your docking system, press to
activate Bluetooth.
» The Bluetooth indicator blinks on the
display panel.
Compatible with Android™
2 Turn on Bluetooth function of your
To make full use of your docking system, your
Android-powered device should satisfy the
following requirements:
portable device.
#ꢊ Different devices may have different
way to activate Bluetooth.
#ꢊ With Android operation system (Version
2.1 or above);
#ꢊ With Bluetooth software (Version 2.1 or
above); and
#ꢊ With a micro USB connector.
For other devices with micro USB connector
and Bluetooth function, you can still use the
docking system to do the the following:
#ꢊ Charge your device through the USB
connector;
#ꢊ Enjoy audio through Bluetooth.
Tip
# ꢚꢇꢐꢊꢎꢇꢐꢂꢊꢛꢂꢆꢅꢄꢏꢉ"ꢊ#ꢇꢊꢆꢇꢊꢑꢑꢑ$ꢁꢓꢄꢏꢄꢁꢉ$ꢃꢇꢎ%]ꢂ*ꢄꢛꢇꢃ+$
Play audio through manual
Bluetooth connection
The docking system uses Bluetooth wireless
technology to stream music from your portable
device to the system.
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Scan Bluetooth devices that can pair with
5 Play audio with the media player of your
your portable device.
portable device.
» The audio comes out through the
4 When [PHILIPS AS140] is displayed on
your device, select it to start connection.
» If connection is successful, you will hear
ꢛꢇꢗꢙꢏꢂꢊꢙꢂꢂꢁꢊꢃꢇꢈ\ꢐꢎꢅꢆꢄꢇꢈꢊꢅꢈꢛꢊ\ꢈꢛꢊꢅꢊ
different Bluetooth icon on the top of
the screen.
docking system.
Tip
# The effective operation range between the docking
system and the paired device is approximately 10
meters (30 feet).
# Any obstacle between the system and the device can
reduce the operational range.
Play audio through auto
Bluetooth connection with
Philips DockStudio
Philips DockStudio app brings a suite of new
features to your docking system, including
automatic Bluetooth connection, Songbird
music player, Internet radio and a multi-function
alarm clock.To enjoy more features, you are
recommended to download and install the free
app.
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Follow the on-screen instructions to install
Install DockStudio app onto Android-
powered device
Philips DockStudio app.
You have two ways to install Philips
DockStudio on your Android-powered device.
Install DockStudio app through QR code
Note
# Make sure that your Android-powered device is
connected to the Internet.
# Make sure that your device has a barcode scanner such
as "QR Droid". If not, download one from the Android
market.
The Philips DockStudio app brings a suite of
cool, new features to your Philips DockStudio
docking speaker, including automatic Bluetooth
connection, Songbird music player,
1 Use the barcode scanner to scan the QR
code on the package or Quick Start Guide.
worldwide Internet radio, sound settings
3 When installation is complete, tap [Done]
(done).
DockStudio
» The DockStudio icon appears on your
portable device.
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Tap the "Android Market" icon on your
device.
DockStudio
Install DockStudio app through Android
Market
You can also search Philips DockStudio in the
Android Market directly, and then install the app.
2 Tap the search icon on the screen.
Note
# Make sure that your Android-powered device is
connected to the Internet.
# Make sure that Android Market is available on your
Android-powered device.
3 In the search bar, type in "Philips
DockStudio" to search the app.
4 ꢚꢐꢇꢎꢊꢆꢓꢂꢊꢉꢂꢅꢐꢃꢓꢊꢐꢂꢉꢗꢏꢆꢊꢏꢄꢉꢆ"ꢊ\ꢈꢛꢊꢅꢈꢛꢊꢆꢅꢁꢊ
Philips DockStudio to start downloading.
10 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Follow the on-screen instructions to install
Activate Bluetooth with DockStudio
app
the DockStudio app.
Philips DockStudio app helps to connect your
Android-powered device and docking system
through Bluetooth automatically.
Note
# Make sure that your Android-powered device is
connected to the Internet.
First-time launch
1 On your docking system, press
repeatedly to select Bluetooth source.
The Philips DockStudio app brings a suite of
cool, new features to your Philips DockStudio
docking speaker, including automatic Bluetooth
connection, Songbird music player,
»
blinks on the display panel.
2 On the home screen of your device, tap
the DockStudio icon to launch the app.
worldwide Internet radio, sound settings
6 When installation is complete, tap Done
(done).
DockStudio
DockStudio
» A prompt message asking you to
download Songbird appears.
EN 11
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Tap [Cancel] (cancel).
4 When [PHILIPS AS140] is displayed on
your device, select it to start connection.
» It may take a few seconds to complete
the connection.
» The device starts to scan Philips
devices that can be paired
automatically.
» After Bluetooth connection, a different
Bluetooth icon can be found on the
top of the screen.
12 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Play audio with the media player of your
2 Launch Philips DockStudio and access its
portable device.
menu.
» The audio comes out through the
docking system.
Next-time launch
3 Tap [Speaker Connection] (Speaker
Connection) to activate automatic
Bluetooth connection.
Next time you launch the DockStudio app,
connect to the docking system through
Bluetooth as below.
1 Activate the Bluetooth function of your
docking system.
» It may take a few seconds to complete
the connection.
EN 13
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Play audio on your portable device.
» The audio comes out through the
docking system.
Install Songbird on Android-powered
device
1 Tap the DockStudio icon on your Android-
powered device.
Sync time automatically
After you activate Bluetooth connection
through Philips DockStudio, the docking system
synchronizes time with your Bluetooth-enabled
device automatically.
DockStudio
Play audio with Philips
Songbird
» The DockStudio menu is displayed.
Philips Songbird is a simple, easy-to-use PC
program and Android app. It lets you discover,
play and sync your media from PC to your
Android-powered devices seamlessly.
14 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Tap [Songbird].
4 After installation, tap [Open] (Open) to
access Songbird menu.
» You are requested to download
Songbird.
5 Select a track, and then tap to play music.
3 Follow the on-screen instructions to
download the app.
» Songbird is installed on your device.
EN 15
Download from Www.Somanuals.com. All Manuals Search And Download.
» =ꢖꢊꢄꢆꢊꢄꢉꢊꢆꢓꢂꢊ\ꢐꢉꢆꢊꢆꢄꢎꢂꢊꢘꢇꢗꢊꢃꢇꢈꢈꢂꢃꢆꢊꢆꢓꢂꢊ
device to Philips Songbird, a pop-up
screen appears. Select auto sync as
prompted.
Install Songbird on PC
» The device synchronizes with Philips
2 Search Songbird.
Songbird automatically.
If you didn't select auto sync, you can sync with
Songbird manually.
songbird
1 Select the device under Devices.
3 Download the latest Songbird application.
4 Follow on-screen instructions to install
Philips Songbird on your PC.
Sync with PC through Philips Songbird
Note
# Make sure that you have turned on the USB storage.
2 Select Manual or Auto.
1 On your PC, launch Philips Songbird.
2 Connect your Android-powered device to
PC with a USB cable.Wait until the device
is recognized by the Songbird.
3 Click Sync.
» If you have selected auto sync, auto
sync starts automatically when you
connect the device to the PC.
» On Philips Songbird, the device is
displayed when it is recognized by the
PC.
16 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Use more features with
DockStudio
With Philips DockStudio, you can also listen to
Internet radio, set alarm timer and sleep timer.
Set alarm timer
With Philips DockStudio, you can set multiple
alarms and know the latest weather. It even
alerts you when weather conditions are suitable
for your favorite outdoors activity.
1 Launch the app.
3 Tap [Alarm settings] (Alarm settings).
2 Tap the icon to access clock setting
menu.
4 Tap to access alarm setting menu.
EN 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Set sleep timer
1 Launch Philips DockStudio.
5 Set the alarm, and tap [Save] (Save) on the
top right of the screen.
» The new alarm is saved and displayed
on the screen.
2 Tap the icon to access the sleep timer
menu.
Note
# From the [Lifestyle] (Lifestyle) tab, you can select your
preferred sport and weather (excellent, good, or fair).
The alarm will not ring if the weather is not good
enough.
18 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Select a time period for the sleep timer,
3 Tap [Radio] (Radio) on the screen.
and then tap [Start] (Start).
4 Search a radio station in the search bar.
Note
# This function only works with Philips Songbird.
Listen to Internet radio
1 Connect your Android-powered device
and the docking system through Bluetooth.
2 Open Philips DockStudio to go to the
main menu.
5 Select a radio station from the search
result list.
» The radio station begins to broadcast.
EN 19
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Adjust the bumpers on both sides of the
Dock and charge Android-
powered phone
connector to stabilize the phone.
Dock Android-powered phone
To charge your Android-powered phone, you
ꢈꢂꢂꢛꢊꢆꢇꢊꢛꢇꢃ+ꢊꢄꢆꢊꢄꢈꢊꢆꢓꢂꢊꢛꢇꢃ+ꢄꢈ#ꢊꢉꢘꢉꢆꢂꢎꢊ\ꢐꢉꢆ$
1 Check the orientation of the micro USB
connector on your Android-powered
phone.
4 Slide the connector to place your phone in
the middle of the docking system.
» =ꢖꢊꢘꢇꢗꢐꢊ>ꢀ?ꢊꢃꢇꢈꢈꢂꢃꢆꢇꢐꢊꢓꢅꢉꢊꢅꢊꢃꢇ@ꢂꢐ"ꢊ]ꢄꢁꢊ
it outwards.
Note
# If the micro USB connector is located at the top, and
your are using Android system of version 2.3 or above,
screen auto-rotation is available.
Use dock extension
If the USB connector on your phone is close
to the edge, the supplied dock extension can
balance the docked phone, as illustrated.
2 If necessary, rotate the USB connector on
the docking system, and then place your
Android-powered phone into the dock.
1 Adjust the slide knobs to make both
bumpers at the lowest position.
20 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Place the dock extension onto the dock.
3 Dock your phone.
Charge Android-powered phone
When the docking system is connected to
power, your docked phone starts charging
automatically even in standby mode.
EN 21
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Listen to FM
radio
Store FM radio stations
manually
1 Tune to an FM radio station.
2 Press PROG.
» The preset number begins to blink.
Tune to FM radio stations
3 Press
/
repeatedly to select a number.
4 Press PROGꢊꢅ#ꢅꢄꢈꢊꢆꢇꢊꢃꢇꢈ\ꢐꢎ$
Tip
5 Repeat steps 1 to 4 to store other stations.
# Position the antenna as far as possible fromTV,VCR, or
other radiation source.
# For better reception, fully extend and adjust the
Note
position of the antenna.
# To remove a pre-stored station, store another station
in its place.
1 Press SOURCE repeatedly to select FM
tuner source.
2 Press and hold
/
for two seconds.
» The docking system tunes to a station
Select a preset radio station
with strong reception automatically.
In tuner mode, press
a preset number.
/
repeatedly to select
3 Repeat step 2 to tune to more radio
stations.
To tune to a station manually:
1 Press
/
ꢊꢐꢂꢁꢂꢅꢆꢂꢛꢏꢘꢊꢗꢈꢆꢄꢏꢊꢘꢇꢗꢊ\ꢈꢛꢊ
optimal reception.
Store FM radio stations
automatically
Note
# You can store a maximum of 20 FM radio stations.
In tuner mode, press an hold PROG for two
seconds.
» The docking system stores all the available
ꢚHꢊꢐꢅꢛꢄꢇꢊꢉꢆꢅꢆꢄꢇꢈꢉꢊꢅꢈꢛꢊꢙꢐꢇꢅꢛꢃꢅꢉꢆꢉꢊꢆꢓꢂꢊ\ꢐꢉꢆꢊ
available station automatically.
22 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Select alarm source
6 Other features
Note
# For alarm sound, you can select buzzer, your last
listened radio chanel, or the latest played track in your
Android-powered device.
Set time
Adjust AL1/AL2 RADIO·BUZZ·DOCK
control to select alarm source for both alarms.
1 Press to switch the docking system to
standby mode.
2 Press and hold SETTIME for two seconds.
» The hour and minute digits begin to
blink.
Note
# If DOCK is selected as alarm source, make sure that
you have docked your device into the docking system.
3 Press
/
and
/
repeatedly to set
the hour and minute.
4 Press SETTIMEꢊꢆꢇꢊꢃꢇꢈ\ꢐꢎ$
Activate/deactivate alarm timer
» [12H] or [24H] begins to blink.
5 Press
/
to select 12/24 hour format.
1 Press AL1/AL2 to view alarm settings.
6 Press SETTIMEꢊꢆꢇꢊꢃꢇꢈ\ꢐꢎ$
2 Press AL1/AL2 again to activate or
» The set time is displayed.
deactivate the alarm timer.
» The alarm icon appears if alarm timer
is on and disappears if it is off.
#ꢊ To stop the ringing alarm, press the
corresponding AL1/AL2.
Set alarm timer
» The alarm repeats ringing for the next
day.
Set alarm
In standby mode, you can set two alarms to ring
at different time.
Snooze alarm
When alarm sounds, press SNOOZE.
» The alarm snoozes and repeats ringing
nine minutes later.
Note
# Make sure that you have set the clock correctly.
1 Press and hold AL1/AL2 for two seconds
to activate alarm setting mode.
» The hour and minute digits begin to
blink.
Set sleep timer
This docking system can switch to standby
mode automatically after a preset period.
Press SLEEP repeatedly to select the sleep
timer period (in minutes).
» When the sleep timer is activated,
appears.
2 Press
/
and
/
repeatedly to set
the hour and minute.
3 Press AL1/AL2ꢊꢆꢇꢊꢃꢇꢈ\ꢐꢎ$
EN 23
Download from Www.Somanuals.com. All Manuals Search And Download.
To deactivate the sleep timer
Press SLEEP repeatedly until [OFF] (off)
appears.
Play audio from an external
device
You can listen to audio from an external device
through this device.
1 Connect the MP3 link cable to:
#ꢊ the MP3 LINK socket.
#ꢊ the headphone socket of an external
device.
2 Press SOURCE repeatedly to select MP3
link source.
»
is displayed.
3 Play audio in the external device (see the
device's user manual).
Adjust display brightness
Press BRIGHTNESS repeatedly to select
different brightness levels.
24 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Dimensions
- Main Unit
(W x H x D)
Weight
- With Packing
- Main Unit
7 Product
information
290 x 160 x 113 mm
2.0 kg
1.4 kg
Note
# Product information is subject to change without prior
notice.
!ꢇꢃꢍꢋ\ꢍꢆꢁꢋꢀꢌꢉ
#ꢑꢇꢎꢋ\ꢃꢄ
Rated Output Power
2 X 5W RMS
Tuner
Tuning Range
FM: 87.5 -
108 MHz
Sensitivity
- Mono, 26dB S/N Ratio
Search Selectivity
FM: <22 dBf
FM: <28 dBf
Total Harmonic Distortion FM: <2%
Signal to Noise Ratio
FM: >55 dB
General information
AC Power
Model:AS180-070-
AA250; Input: 100-240
V ~, 50/60Hz, 0.7A;
Output: 7V 2.5A
<35 W
Operation Power
Consumption
Standby Power
Consumption
Max. load of Android
output
<1 W
5V 1A
EN 25
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Troubleshooting
About Bluetooth device
Music playback is unavailable on the system
even after successful Bluetooth connection.
Warning
# Never remove the casing of this device.
#
The device cannot be used with the
system to play music.
To keep the warranty valid, never try to repair
the system yourself.
The audio quality is poor after connection
with a Bluetooth-enabled device.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page (www.
philips.com/support).When you contact Philips,
make sure that the device is nearby and the
model number and serial number are available.
#
The Bluetooth reception is poor. Move
the device closer to the system or remove
any obstacle between the device and the
system.
Cannot connect with the system.
#
ꢕꢓꢂꢊꢛꢂ@ꢄꢃꢂꢊꢛꢇꢂꢉꢊꢈꢇꢆꢊꢉꢗꢁꢁꢇꢐꢆꢊꢆꢓꢂꢊꢁꢐꢇ\ꢏꢂꢉꢊ
required for the system.
No power
#
The Bluetooth function of the device is not
enabled. Refer to the user manual of the
device for how to enable the function.
The system is not in the pairing mode.
The system is already connected with
another Bluetooth-enabled device.
Disconnect that device or all other
connected devices and then try again.
#
Ensure that the AC power plug of the unit
is connected properly.
Ensure that there is power at the AC
outlet.
#
#
#
No sound or poor sound
#
Adjust the volume of your docking system
and Android-powered device.
Make sure that your Android-powered
device is connected to the docking system
through Bluetooth.
#
The paired device connects and disconnects
constantly.
#
The Bluetooth reception is poor. Move
the device closer to the system or remove
any obstacle between the device and the
system.
For some devices, the Bluetooth
connection may be deactivated
automatically as a power-saving feature.
This does not indicate any malfunction of
the system.
Poor radio reception
#
Increase the distance between the unit and
yourTV orVCR.
Fully extend the FM antenna.
#
#
Clock/timer setting erased
#
Power has been interrupted or the power
plug has been disconnected.
Reset the clock/timer.
#
Alarm does not work
Set the clock/alarm correctly.
#
26 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
9 Notice
RSS
This device complies with Industry Canada
license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this
device may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
ꢍꢈꢘꢊꢃꢓꢅꢈ#ꢂꢉꢊꢇꢐꢊꢎꢇꢛꢄ\ꢃꢅꢆꢄꢇꢈꢉꢊꢎꢅꢛꢂꢊꢆꢇꢊꢆꢓꢄꢉꢊ
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
Notice for the USA
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation.This equipment generates,
uses, and can radiate radio frequency energy
and, if not installed and used in accordance
with the instruction manual, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encouraged
to try to correct the interference by one or
more of the following measures:
#ꢊ Relocate the receiving antenna.
#ꢊ Increase the separation between
equipment and receiver.
#ꢊ Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
#ꢊ Consult the dealer or an experienced
radio/TV technician for help.
The set complies with the FCC-Rules, Part
15. Operation is subject to the following two
conditions:
1.This device may not cause harmful
interference, and
2.This device must accept any interference
received, including interference that may cause
undesired operation.
Disposal of your old product
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products and batteries.
The correct disposal of these products helps
prevent potentially negative consequences on
the environment and human health.
information on a recycling center in your area.
Environmental information
This equipment complies with FCC’s and IC's
RF radiation exposure limits set forth for an
uncontrolled environment.The antenna(s)
used for this transmitter must be installed and
operated to provide a separation distance of
at least 20 cm from all persons and must not
be collocated or operating in conjunction with
any other antenna or transmitter. Installers must
ensure that 20cm separation distance will be
maintained between the device (excluding its
handset) and users.
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
EN 27
Download from Www.Somanuals.com. All Manuals Search And Download.
get the very most from your purchase.
Register online at www.philips.com/welcome to ensure:
Congratulations on your purchase,
and welcome to the “family!”
This “bolt of lightning” indicates unin-
sulated material within your unit may
cause an electrical shock. For the safety of
everyone in your household, please do not
remove product covering.
Dear PHILIPS product owner:
The “exclamation point” calls atten-
tion to features for which you should
read the enclosed literature closely to pre-
vent operating and maintenance problems.
WARNING: To reduce the risk of fire or
electric shock, this apparatus should not be
exposed to rain or moisture and objects
filled with liquids, such as vases, should not
be placed on this apparatus.
CAUTION: To prevent electric shock,
match wide blade of plug to wide slot, fully
insert.
ATTENTION: Pour éviter les choc élec-
triques, introduire la lame la plus large de la
fiche dans la borne correspondante de la
prise et pousser jusqu’au fond.
P.S. To get the most from your PHILIPS purchase, be
sure to register online at:
28
Download from Www.Somanuals.com. All Manuals Search And Download.
PHILIPS LIMITED WARRANTY
ONE (1) YEAR
WARRANTY COVERAGE:
Philips, or (d) if any Philips serial number has been removed or
defaced, or (e) product, accessories or consumables sold “AS IS”
without warranty of any kind by including refurbished Philips
product sold “AS IS” by some retailers.
PHILIPS warranty obligation is limited to the terms set forth
below.
WHO IS COVERED:
Philips warrants the product to the original purchaser or the per- This Limited Warranty does not cover:
son receiving the product as a gift against defects in materials and
workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original
sales receipt showing the product name and the purchase date
from an authorized retailer is considered such proof.
ment of customer controls on the product, and installation or
repair of antenna/signal source systems outside of the product.
installation or maintenance, connections to improper voltage
supply, power line surge, lightning damage, retained images or
screen markings resulting from viewing fixed stationary con-
tent for extended periods, product cosmetic appearance items
due to normal wear and tear, unauthorized repair or other
cause not within the control of Philips.
WHAT IS COVERED:
The Philips warranty covers new products if a defect in material
or workmanship occurs and a valid claim is received by Philips
within the Warranty Period. At its option, Philips will either (1)
repair the product at no charge, using new or refurbished
replacement parts, or (2) exchange the product with a product
that is new or which has been manufactured from new, or ser-
viceable used parts and is at least functionally equivalent or most
comparable to the original product in Philips current inventory,
or (3) refund the original purchase price of the product.
Philips warrants replacement products or parts provided under
this warranty against defects in materials and workmanship from
the date of the replacement or repair for ninety (90) days or for
the remaining portion of the original product’s warranty,
whichever provides longer coverage for you. When a product or
part is exchanged, any replacement item becomes your property
and the replaced item becomes Philips’ property. When a refund
is given, your product becomes Philips’ property.
for lost data or lost software.
returning product to Philips.
it to operate in any country other than the country for which
it was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications.
(including but not limited to rental purposes).
can be provided.
Note: Any product sold and identified as refurbished or
renewed carries a ninety (90) day limited warranty.
TO OBTAIN ASSISTANCE IN THE U.S.A., PUERTO
RICO, OR U.S. VIRGIN ISLANDS…
Contact Philips Customer Care Center at:
1-888-PHILIPS (1-888-744-5477)
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all requirements
can result in delay.
TO OBTAIN ASSISTANCE IN CANADA…
1-800-661-6162 (French Speaking)
1-888-PHILIPS (1-888-744-5477) - (English or Spanish
Speaking)
WHAT IS NOT COVERED - EXCLUSIONS AND LIMI-
TATIONS:
This Limited Warranty applies only to the new products manu-
factured by or for Philips that can be identified by the trademark,
trade name, or logo affixed to it. This Limited Warranty does not REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
apply to any non-Philips hardware product or any software, even
if packaged or sold with the product. Non-Philips manufacturers,
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-
SUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN-
suppliers, or publishers may provide a separate warranty for their TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF
own products packaged with the bundled product.
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD-
UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE
LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT
IS LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY.
Philips is not liable for any damage to or loss of any programs,
data, or other information stored on any media contained within
the product, or any non-Philips product or part not covered by
this warranty. Recovery or reinstallation of programs, data or
other information is not covered under this Limited Warranty.
Some states do not allow the exclusions or limitation of inciden-
tal or consequential damages, or allow limitations on how long an
implied warranty lasts, so the above limitations or exclusions may
not apply to you.
This warranty does not apply (a) to damage caused by accident,
abuse, misuse, neglect, misapplication, or non-Philips product, (b)
to damage caused by service performed by anyone other than
Philips or Philips Authorized Service Location, (c) to a product or
a part that has been modified without the written permission of
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
Philips, P.O. Box 10313 Stamford, CT 06904
3140 035 50201
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Philips Consumer Lifestyle
A division of Philips Electronics North America Corporation
P.O. Box 10313
Stamford, CT 06904
%ꢂꢀꢌꢃ&ꢅ*;<<<;%=>?>%!ꢅꢊ@JJ;\J@@ꢒ
Meet Philips at the Internet
Specifications are subject to change without notice
© 2012 Koninklijke Philips Electronics N.V.
All rights reserved.
AS140_37_CCR_V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
|