User guide
S M A R T . V E R Y S M A R T .
MAS85
MINI HI-FI SYSTEM
Thank you for choosing Magnavox
Need help fast?
Read your Quick Use Guide and/or
Owner's manual first for quick tips
that make using your magnavox product
more enjoyable.
If you have read your instructions
and still need assistance,
you may access our online help at
or call
1-800-705-2000
while with your product
(and Model / Serial number)
Download from Www.Somanuals.com. All Manuals Search And Download.
1
™
¡
)
2
3
(
*
4
&
^
%
5
6
7
8
9
0
$
#
@
!
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Return your Product Registration Card today
to get the very most from your purchase.
Registering your model with Magnavox makes you eligible for all of the valuable benefits listed below, so
don't miss out. Complete and return your Product Registration Card at once to ensure:
*Proof of
Purchase
*Product Safety *Additional
Benefits of
Notification
Product
Ownership
Returning the enclosed card
guarantees that your date of
purchase will be on file, so no
additional paperwork will be
required from you to obtain war-
ranty service.
By registering your product, you'll
receive notification - directly
from the manufacturer - in the
rare case of a product recall or
safety defect.
Registering your product guaran-
tees that you'll receive all of the
privileges to which you're enti-
tled, including special money-sav-
ing offers.
Knowsthaesfeetysymbols
CAUTION
For Customer Use
Enter below the Serial No. which is
located on the rear of the cabinet.
Retain this information for future ref-
erence.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Model No. ______________________
Serial No. ______________________
This “bolt of lightning” indicates
uninsulated material within your
t
WARNING: TO PREVENT FIRE OR
SHOCK HAZARD, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR
MOISTURE.
unit may cause an electrical
shock. For the safety of everyone in
your household, please do not remove
product covering.
The “exclamation point” calls
attention to features for which
you should read the enclosed
CAUTION: To prevent electric shock,
match wide blade of plug to wide slot,
fully insert.
s
literature closely to prevent operating
and maintenance problems.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Congratulations on your purchase,
and welcome to the “family!”
Dear Magnavox product owner:
Thank you for your confidence in Magnavox. You’ve selected one of
the best-built, best-backed products available today. We’ll do every-
thing in our power to keep you happy with your purchase for many
years to come.
As a member of the Magnavox “family,” you’re entitled to protection
by one of the most comprehensive warranties and outstanding serv-
ice networks in the industry. What’s more, your purchase guaran-
tees you’ll receive all the information and special offers for which
you qualify, plus easy access to accessories from our convenient
home shopping network.
Most importantly, you can count on our uncompromising commit-
ment to your total satisfaction.
All of this is our way of saying welcome - and thanks for investing in
a Magnavox product.
P.S. To get the most from your Magnavox purchase, be
sure to complete and return your Product Registration
Card at once.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
13. Unplug this apparatus during lightning
storms or when unused for long periods of
time.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
14. Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
4. Follow all instructions.
5. Do not use this apparatus near
water.
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
6. Clean only with dry cloth.
7. Do not block any ventilation
openings. Install in accordance with
the manufacturer´s instructions.
15.Battery usage CAUTION To
prevent battery leakage which may result in
bodily injury, property damage, or damage
to the unit:
8. Do not install near any heat sources
such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
Install all batteries correctly, + and - as
marked on the unit.
9. Do not defeat the
Do not mix batteries (old and new or
safety purpose of the
carbon and alkaline, etc.).
polarized or
grounding-type plug.
Remove batteries when the unit is not used
for a long time.
A polarized plug has two blades with one
wider than the other.A grounding type plug
has two blades and a third grounding prong.
The wide blade or the third prong are
provided for your safety. If the provided plug
does not fit into your outlet, consult an
electrician for replacement of the obsolete
outlet.
16.Apparatus shall not be exposed to
dripping or splashing.
17.Do not place any sources of danger
on the apparatus (e.g. liquid filled
objects, lighted candles).
18.This product may contain lead and mercury.
Disposal of these material may be regulated
due to environment considerations.
10. Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
For disposal or recycling information,
please contact your local authorities
or the Electronic Industries Alliance :
11.Only use attachments/accessories
specified by the manufacturer.
12.
Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer or sold with
the apparatus.When a cart is
used, use caution when moving
the cart/apparatus combination
to avoid injury from tip-over.
EL 6475-E004: 03/12
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
English ------------------------------------------------ 6
Español --------------------------------------------- 25
Español --------------------------------------------- 43
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
General Information
Specifications ........................................... 19
Supplied accessories ............................................ 9
Environmental information ................................ 9
Maintenance .......................................................... 9
Safety information ................................................ 9
Troubleshooting .................................... 20
Controls
Controls on the system .................................... 10
Remote control .................................................. 11
Installation
Rear connections ............................................... 12
Speakers connection
FM antenna
Using AC power ................................................. 13
Inserting batteries into the remote control. 13
Basic Functions
Switching on/to standby and
and selecting functions ...................................... 14
Volume control ................................................... 14
Sound control ..................................................... 14
DBB (Dynamic Bass Boost)
Reset ..................................................................... 14
CD Operation
Discs for playback .............................................. 15
Playing discs ......................................................... 15
Selecting and searching ............................... 15-16
Selecting a different track
Finding a passage within a track
Changing discs..................................................... 16
Programming tracks........................................... 16
Reviewing the program
Erasing the program
Different play modes: REPEAT ........................ 16
Radio Reception
Tuning to radio stations .................................... 17
Tape Operation/Recording
Loading tapes ...................................................... 17
Playing tapes ........................................................ 17
General information on recording ................. 18
Preparation for recording ................................ 18
One touch recording......................................... 19
8
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
Cleaning the Heads and theTape Paths
To ensure good recording and playback quality,
clean the heads A and B, the capstan(s) C,
and pressure roller(s) D after every 50 hours
of tape operation.
This system complies with the FCC rules,
Part 15 and with 21 CFR 1040.10.
Operation is subject to the following two
conditions:
– This device may not cause harmful
interference, and
– This device must accept any interference
received, including interference that may
cause undesired operation.
●
●
●
Use a cotton swab slightly moistened with
cleaning fluid or alcohol.
You can also clean the heads by playing a
cleaning tape once.
Supplied accessories
– 2 speaker boxes
– remote control
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags,
protective foam sheet).
Demagnetizing the heads
Use a demagnetizing tape available at your
dealer.
●
Your system consists of materials which can be
recycled and reused if disassembled by a
specialized company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
Safety information
Place the system on a flat, hard and stable
surface.
●
●
Do not expose the system, batteries or discs to
excessive moisture, rain, sand or heat sources
caused by heating equipment or direct sunlight.
Maintenance
Cleaning the Cabinet
Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.
●
●
Place the system in a location with adequate
ventilation to prevent internal heat build-up in
your system. Allow at least 10 cm (4 inches)
clearance from the rear and the top of the unit
and 5 cm (2 inches) from each side.
●
The mechanical parts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.
Cleaning Discs
●
●
When a disc becomes dirty,
clean it with a cleaning cloth.
Wipe the disc from the center
out.
Do not use solvents such as
benzene, thinner, commercially available cleaners,
or antistatic spray intended for analog records.
Cleaning the disc lens
●
After prolonged use, dirt or dust may
accumulate at the disc lens.To ensure good
playback quality, clean the disc lens with Philips
CD Lens Cleaner or any commercially available
cleaner. Follow the instructions supplied with
cleaner.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls (illustrations on page 3)
@ Tape deck
Controls on the system
# FUNCTION:TUNER,TAPE, CD
1 Disc trays
–
selects CD, tape or radio source of sound
$ PROGRAM
programs tracks and reviews the program
% n
3.5 mm headphone socket
2 PROGRAM indicator
3 REPEAT indicator
4 TUNING rotary
–
–
tunes to radio stations
5 OPEN/CLOSE
press to open/close the disc tray
6 DBB
–
Helpful hints:
–
– Adjust the volume to a moderate level
before you plug in the headphones.
– Connecting headphones will switch off the
speakers.
–
turns the bass enhancement on/off
^ ÉÅ
7 4 / ¢
–
starts or pauses CD playback
–
skips or searches CD tracks backwards/
forwards
& DISC: 1/ 2/ 3
8 REPEAT
–
selects a disc tray for playback
* VOLUME 3, 4
adjusts the volume level
( POWER
switches the system on or to standby
–
selects repeat modes
9 BAND (AM•FM•FM STEREO)
–
–
selects waveband
0 STOPÇ
–
mode.
–
–
stops CD playback;
erases a CD program
) REMOTE SENSOR
–
sensor for the infrared remote control
! Tape deck keys
Helpful hints: Always point the remote
control towards this sensor.
RECORD ..starts recording
£.................... starts playback
à /á ............ fast rewinds/winds a tape
70.................... stops playback;
............................. opens the tape holder
¡ FM ST. indicator
™ Power indicator
Å ...................... interrupts playback or
recording
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
1 POWER ON
switches the system on or to standby
mode
2 DIGITS 0 - +10
CD: selects a track number
3 REPEAT
Remote control
–
–
1
2
0
–
selects repeat modes
4 ÉÅ
–
starts or pauses CD playback
9
3
4
5 DISC
8
7
DISC 1/DISC 2/DISC 3
5
6
–
selects a disc tray for playback
DISC CHANGE
–
changes disc trays
6 VOLUME 3, 4
adjusts the volume level
7 STOP
–
–
–
stops CD playback
erase a CD program
8 4 / ¢
–
skips or searches CD tracks backwards/
forwards
9 PROGRAM
programs tracks and reviews the program
0 OPEN/CLOSE
press to open/closes the disc tray
–
–
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
FM wire antenna
Speaker
(right)
Speaker
(left)
-
+
AC power cord
Black
Red
1
2
Press the clip of the black terminal and fully
insert the stripped portion of the black (or
unmarked) speaker cable into the socket, then
release the clip.
Rear connections
Warning:
Never make or change connections with
the power supply switched on.
B FM antenna
A Speakers connection
1 Extend the wire antenna and move the antenna
in different positions for optimal reception (as far
away as possible from theTV,VCR or other
radiation sources).
Use the supplied speakers only. Using other
speakers can damage the set or the sound
quality will be negatively affected.
●
Connect the speaker wires to the SPEAKERS
2 Fix the antenna’s end to the wall.
terminals, right speaker to “R” and left speaker to
“L”, red (labelled red) wire to “+” and black
(labelled black) wire to “-”.
-
+
Black
Red
Press the clip of the red terminal and fully insert
the stripped portion of the coloured (or
marked) speaker cable into the socket, then
release the clip.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Using AC power
Inserting batteries into the
remote control
1 Make sure all connections have been made
before switching on the power supply.
Insert two batteries type R06 or AA into the
remote control with the correct polarity as
indicated by the "+" and "-" symbols inside
the battery compartment.
2 Connect the power cable supplied to
AC ~ and to the wall socket.This switches on
the power supply.
When the system is switched to standby, it is still
consuming some power. To disconnect the
system from the power supply completely,
remove the power plug from the wall
socket.
1
2
3
The type plate is located on the rear of the
set.
CAUTION!
– Remove batteries if they are
exhausted or will not be used for a
long time.
– Do not use old and new or different
types of batteries in combination.
– Batteries contain chemical
substances, so they should be disposed
off properly.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
Switching on/to standby and
selecting functions
1 Press POWER to switch on (or .POWER ON
on the remote control).
Sound control
●
On the set, Press DBB (Dynamic Bass
Boost) once or more to turn bass
enhancement on or off .
➜The POWER indicator lights up
➜ The system switches to the last source
selected.
Helpful hints:
– Some discs or tapes might be recorded in high
modulation, which causes a distortion at high
volume. If this occurs, switch off DBB or reduce
the volume.
2 To select your function, push FUNCTION to
TUNER, TAPE or CD.
3 Press POWER to switch the system to standby.
Reset
If desired, you can restore your system to its
default setting.
Volume control
1 Remove the power plug from the wall socket.
1 Check the system is switched on.
2 Use a ballpoint pen to press the RESET for
more than 30 seconds.
2 Adjust the volume with VOLUME control.
3 Reconnect the power plug .
Helpful hints:
➜ The system is restored to its default setting.
–
In the standby mode, the volume level will be
retained in the system’s memory.
IMPORTANT!
– Adjust the volume to a moderate level
before you switch the system to standby
mode or plug in the headphones.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
CD Operation
Discs for playback
This system can playback all digital audio CD,
finalized digital audio CD-Recordable (CDR)
discs and finalized digital audio CD-Rewritable
(CDRW)discs.
01
To start playback from a selected disc tray, press
●
DISC 1, 2 or 3.
5 To pause playback, pressÉÅ.
PressÉÅ again to resume playback.
6 To stop playback, press STOPÇ.
7 To remove the disc, press OPEN/CLOSE to
open the disc trays.
IMPORTANT!
– This system is designed for regular
discs. Therefore, do not use any
accessories such as disc stabilizer rings or
disc treatment sheets, etc., which may
jam the changer mechanism.
– Do not load more than one disc into
each tray.
●
If necessary, press DISC CHANGE (on the
remote control) to rotate the disc trays.
Helpful hints: CD playback will also stop when:
– you select TUNER or TAPE.
– CDs encoded with copyright
protection technologies by some record
companies may be unplayable by this
system.
Selecting and searching
Selecting a different track
●
Briefly press 4 or ¢once or several times
to skip to the beginning of the current, previous
or subsequent track.
Playing discs
1 Press POWER to on, then push FUNCTION
to CD.
2 Press OPEN/CLOSE to open the disc trays.,
and load your discs in the two trays.
or
Use the digit keys on the remote control to
select the track number directly. e.g.
Track 2: Press 2
Track 10: Press +10,
Track 12: Press +10 and then, 2
Track 22: Press +10, +10 and then, 2.
1
F
L
F
S
L
I
I
D
●
To load a third disc, press DISC CHANGE (on
the remote control) to rotate the disc trays.
Helpful hints:
– Make sure the disc label is facing up.
●
In the pause/stop position, press ÉÅ to start
playback.
➜ Playback of selected track starts.
3 Press OPEN/CLOSE to close the disc trays.,
➜ A lighted DISC button indicates that a disc is
being read in the disc tray.
➜ Display shows: --, 00 and later, the total
number of tracks.
4 PressÉÅ to start playback.
➜ Display shows: current track number.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CD Operation
4 Repeat steps 2 to 3 to select and store all
Finding a passage within a track
desired tracks in this way.
1 During playback, press and hold 4 or ¢.
5 To play your program, pressÉÅ.
➜ The CD plays at a high speed.
➜ PROGRAM indicator lights up.
2 When you recognize the passage you want,
release 4 or ¢.
Helpful hints:
➜ Normal playback resumes.
– If you store more than 30 tracks, the display will
show the 1st track in the program.At this time, you
can still store a new track, but the new track will
replace the 1st track in the program.
–When playback of your program comes to the
stop position, your set will return to normal
playback.To re-enter program mode, press
PROGRAM in the stop position.
Changing discs
●
Press DISC CHANGE (on the remote
control), or DISC 1/2/3 to select a tray.
Helpful hints:
– Make sure that the disc tray you select is
loaded. It will be no response if an unloaced disc
tray is selected.
Reviewing the program
●
In the stop position, press repeatedly
PROGRAM to see your stored track numbers.
Programming tracks
You may store up to 30 tracks in the desired
sequence. If you like, store any track more than
once.
Helpful hints:
– Display first shows the number of program
location and then, the number of the track stored
here.
1 In the stop position, press PROGRAM to
activate programming.
Erasing the program
➜ PROGRAM indicator flashes. Display shows
01, indicating the start of the program.
➜ 00 flashes for you to program a track.
●
You can erase the contents of the memory by:
– selecting TUNER or TAPE sound source;
– in the stop position, press PROGRAM to
enter program mode and then, press Ç.
➜ PROGRAM indicator turns off.
01
00
Different play modes: REPEAT
You can select and change the play modes
before or during playback, and combine the
modes
or
with PROGRAM.
(lights up) – plays current track continuously.
(flashes) – repeats current disc/
program.
2 Press digits 0 - +10 on remote control or
4 or ¢to select your desired track. (See
Selecting a different track)
1 To select play modes, press once or more
REPEAT.
2 PressÉÅ to start playback if in the stop
●
If necessary, press DISC 1/ 2/ 3 to select a
position.
disc tray.
3 To return to normal playback, press REPEAT
repeatedly until the REPEAT indictor turns off.
➜ You can also press Ç to cancel your play
modes.
3 Press PROGRAM to store the desired track
number.
➜ Display shows 02 (up to 30 in sequence),
indicating the next program location available.
➜ 00 flashes for you to program the next track.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Reception
Tuning to radio stations
1 Press POWER to on, then push FUNCTION
to TUNER.
2 Adjust BAND to select your desired
waveband, AM or FM ST.
3 Turn TUNING to tune to a station.
- FM ST. lights up for stereo FM reception.
To improve radio reception:
●
●
For FM, extend and turn the wire antenna for
best reception.
To tune to a weak FM station, adjust BAND to
FM (mono).
For AM, the set uses a built-in antenna. Direct
this antenna for best reception by turning the
whole set.
Tape Operation
IMPORTANT!
Playing tapes
Press £.
– Before playing a tape, check and
tighten slack tape with a pencil. Slack
tape may jam or burst in the
mechanism.
●
●
To pause playback, pressÅ. To resume playback,
press Å again.
– C-120 tape is extremely thin and is
easily deformed or damaged. It is not
recommended for use in this system.
– Store the tapes at room temperature
and do not put them too close to a
magnetic field (for example, a
transformer,TV or speaker).
●
●
By pressing à / á , fast winding of the tape is
possible in both directions.To stop fast winding,
press 70.
To stop the tape, press 70.
Helpful hints:
– During playback, the keys are automatically
released at the end of a tape (unlessÅ has been
activated).
Loading a tape
– During fast forwarding/rewinding, the keys will
not be released at the end of a tape.To stop fast
winding, press 70.
1 Press POWER to on, then push FUNCTION
to TAPE.
2 Press 70to open the tape deck door.
3 Load the tape with the open side downward
and full spool to the left.
4 Close the tape deck door.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape Recording
General information on
recording
One touch recording
1 Push FUNCTION to CD or TUNER to
●
●
For recording, use only tape of IEC type I
(normal tape).
select the source.
If desired, program CD track numbers.
●
The recording level is set automatically, regardless
of the position of theVolume, DBB and so forth.
2 Start playback of the selected source.
3 Press RECORDâ to start recording.
●
●
The tape is secured at both ends with leader
tape. At the beginning and end of the tape,
nothing will be recorded for six to seven
seconds.
To stop recording
Press 70.
●
Helpful hints:
To prevent accidental recording, break out the
tab on the left shoulder of the tape side you
want to protect.
– When recording from AM (FW) radio stations,
adjust BEAT CUT to 1 or 2, if necessary, to
reduce interference.
IMPORTANT!
– Recording is permissible if copyright
or other rights of third parties are not
infringed upon.
Preparation for recording
1 Load a recordable tape into tape deck with full
spool to the left.
2 Prepare the source to be recorded.
CD – load a disc.
TUNER – tune to the desired radio station.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
GENERAL INFORMATION
AMPLIFIER
Material .............................................................. Polystyrene
AC Power ..................................................... 120V / 60Hz
Power Consumption
Active .......................................................................... 25W
Standby .....................................................................≤ 5 W
Dimensions (w x h x d)
Output power ................................... 4 W total power
........................................................................... 2 x 2 W RMS
Signal-to-noise ratio.......................... ≥ 67 dBA (IEC)
Frequency response .......................... 50 – 15000 Hz
Impedance loudspeakers ......................................... 8 Ω
Impedance headphones .................... 32 Ω -1000 Ω
(1) (8Ω, 60 Hz – 12.5 kHz, 10%THD)
...................................................... 265 x 295 x 360 (mm)
Weight (without speakers)................................. 6.3 kg
CD PLAYER
Number of programmable tracks ......................... 30
Frequency range .................................. 20 – 20000 Hz
Signal-to-noise ratio....................................... ≥ 76 dBA
Channel separation ........................... ≥ 25dB (1 kHz)
Total harmonic distortion..................................... < 3%
Specifications and external appearance are
subject to change without notice.
TUNER
FM wave range ................................... 87.5 – 108 MHz
AM wave range .................................. 530 – 1700 kHz
TAPE DECK
Frequency response
Normal tape (type I)...... 50 – 10000 Hz (8 dB)
Signal-to-noise ratio
Normal tape (type I)................................ ≥ 48 dBA
Wow and flutter .......................................≤ 0.35% DIN
SPEAKERS
System .................................... double port bass reflex
Impedance........................................................................ 8 Ω
Woofer .................................................... 1 x 4" full range
Dimensions (w x h x d)
...................................................... 175 x 295 x 175 (mm)
Weight................................................................ 1.6 kg each
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will
invalidate the warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If
you are unable to remedy a problem by following these hints, consult your dealer or
Philips for help.
Problem
“no” is displayed.
Solution
Insert a suitable disc.
Check if the disc is inserted upside down.
Wait until the moisture condensation at the lens
has cleared.
✔
✔
✔
✔
✔
Replace or clean the disc, see “Maintenance”.
Use a finalized CD-RW or CD-R.
Radio reception is poor.
✔
✔
If the signal is too weak, adjust the antenna or
connect an external antenna for better
reception.
Increase the distance between the Mini HiFi
System and yourTV orVCR.
Recording or playback cannot be made.
✔
✔
✔
Clean deck parts, see “Maintenance”.
Use only NORMAL (IEC I) tape.
Apply a piece of adhesive tape over the missing
tab space.
✔
Reset the system (see RESET chapter),
The system does not react when buttons
are pressed.
Sound cannot be heard or is of poor
quality.
✔
✔
✔
✔
Adjust the volume.
Disconnect the headphones.
Check that the speakers are connected correctly.
Check if the stripped speaker wire is clamped.
The left and right sound outputs are
reversed.
✔
Check the speaker connections and location.
The remote control does not function
properly.
✔
✔
Reduce the distance between the remote
control and the system.
Insert the batteries with their polarities
(+/– signs) aligned as indicated.
Replace the batteries.
✔
✔
Point the remote control directly towards the IR
sensor.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
MAGNAVOX LIMITED WARRANTY
Six (6) Months Free Product Exchange
MAGNAVOX warrants this product against defect in material
Exchange is available in all countries where Magnavox officially
distributes the product. In countries where Magnavox does not
distribute the product, the local Magnavox organization will
attempt to exchange the product, although there may be a delay
if the appropriate product is not readily available or special cus-
toms processes are implied.
or workmanship, subject to any conditions set forth as follows:
PROOF OF PURCHASE:
You must have proof of the date of purchase to exchange the
product.A sales receipt or other document showing the prod-
uct and the date that you purchased the product as well as the
authorized retailer included, is considered such proof.
FOR EXCHANGE INTHE U.S.A., PUERTO RICO, OR
U.S.VIRGIN ISLANDS…
Contact Magnavox Customer Care Center at:
1-800-705-2000
COVERAGE:
Warranty coverage begins the day you buy your product. For a
period of six (6) months from the date of purchase, if the prod-
uct is determined to be defective, Magnavox will exchange the
defective product with a new or renewed product, at its option,
at no charge.The replacement product is covered only for the
warranty period of the original product.When the warranty on
the original product expires, the warranty on all replaced prod-
FOR EXCHANGE IN CANADA…
1-800-661-6162 (French Speaking)
1-800-705-2000 (English or Spanish Speaking)
REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS
ucts also expires.When it is necessary for you to ship the prod- THE EXCLUSIVE REMEDY FOR THE CONSUMER. MAG-
uct to Magnavox for exchange, you will pay the shipping cost for NAVOX SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR
shipment to Magnavox. Magnavox will pay the shipping costs
when returning a product to you.
CONSEQUENTIAL DAMAGES FOR BREACH OF ANY
EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT.
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE
LAW,ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
Note:The exchange model supplied will be the most compara-
ble one in Magnavox current inventory. Shipping of your product FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT
to Magnavox implies intent to follow the specified requirements IS LIMITED IN DURATION TO THE DURATION OF THIS
of the warranty and exchange program. Product received by
Magnavox cannot be returned. Replacement product can only
be sent if all warranty requirements are met. Failure to follow
all requirements can result in delay of exchange process.
WARRANTY.
Some states do not allow the exclusions or limitation of inci-
dental or consequential damages, or allow limitations on how
long an implied warranty lasts, so the above limitations or exclu-
sions may not apply to you. In addition, if you enter into a ser-
vice contract agreement with the MAGNAVOX partnership
within ninety (90) days of the date of sale, the limitation on how
EXCLUDED FROM WARRANTY COVERAGE
Your warranty does not cover:
•
•
Shipping charges to return defective product.
Labor charges for installation or setup of the product, adjust- long an implied warranty lasts does not apply.
ment of customer controls on the product, and installation
or repair of antenna systems outside of the product.
Product repair and/or part replacement because of improper
installation, connections to improper voltage supply, abuse,
neglect, misuse, accident, unauthorized repair or other cause
not within the control of Magnavox.
A product that requires modification or adaptation to enable
it to operate in any country other than the country for
which it was designed, manufactured, approved and/or autho-
rized, or repair of products damaged by these modifications.
Damage occurring to product during shipping when improp-
erly packaged or costs associated with packaging.
•
•
•
•
•
•
Product lost in shipment and no signature verification receipt
can be obtained.
A product used for commercial or institutional purposes
(including but not limited to rental purposes).
Products sold AS IS or RENEWED.
WHERE WARRANTY EXCHANGE IS AVAILABLE:
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
Magnavox, P.O. Box 671539, Marietta, GA. 30006-0026
(Warranty: 4835 710 28200)
21
Download from Www.Somanuals.com. All Manuals Search And Download.
|