Projection
Television
50P8341
55P8341
60P8341
64P8341
50P8342
55P8342
60P8342
64P8342
3135 035 20243
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
16. Damage Requiring Service - The appliance should be
serviced by qualified service personnel when:
A. The power supply cord or the plug has been damaged;
or
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
B. Objects have fallen, or liquid has been spilled into the
appliance; or
7. Do not block any of the ventilation openings. Install in
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or
exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure
damaged.
accordance with the manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
17. Tilt/Stability - All televisions must comply with recommend-
ed international global safety standards for tilt and stability
properties of its cabinet design.
9. Do not defeat the safety purpose of the polarized or ground-
ing-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades
and third grounding prong. The wide blade or third prong
are provided for your safety. When the provided plug does
not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
• Do not compromise these design standards by applying
excessive pull force to the front, or top, of the cabinet which
could ultimately overturn the product.
• Also, do not endanger yourself, or children, by placing
electronic equipment/toys on the top of the cabinet. Such
items could unsuspectingly fall from the top of the set and
cause product damage and/or personal injury.
18. Wall or Ceiling Mounting - The appliance should be
mounted to a wall or ceiling only as recommended by the
manufacturer.
11. Only use attachments/accessories specified by the manu-
facturer.
12.
Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the app-
aratus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
19. Power Lines - An outdoor antenna should be located away
from power lines.
20. Outdoor Antenna Grounding - If an outside antenna is
connected to the receiver, be sure the antenna system is
grounded so as to provide some protection against voltage
surges and built up static charges.
injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
Section 810 of the National Electric Code, ANSI/NFPA No.
70-1984, provides information with respect to proper
grounding of the mast and supporting structure grounding of
the lead-in wire to an antenna discharge unit, size of
grounding connectors, location of antenna-discharge unit,
connection to grounding electrodes and requirements for
the grounding electrode. See Figure below.
14. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15. This product may contain lead and mercury. Disposal of
these materials may be regulated due to environmental con-
siderations. For disposal or recycling information, please
contact your local authorities or the Electronic Industries
21 Object and Liquid Entry - Care should be taken so that
objects do not fall and liquids are not spilled into the enclo-
sure through openings.
Note to the CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close
to the point of cable entry as practical.
Example of Antenna Grounding
as per NEC - National Electric Code
GROUND CLAMP
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)
GROUNDING CONDUCTORS (NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)
ELECTRIC SERVICE EQUIPMENT
Rev. 3/9/01
3
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
GETTING STARTED
SOUND MENU
Welcome/Product Registration . . . . . . . . . . . . . . . .2
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . .3
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . .4
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Adjusting the Treble, Bass,
and Balance . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Using the AVL (Audio Volume Leveler)
Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Using Incredible Surround . . . . . . . . . . . . . . . . .33
Setting the TV for Stereo and SAP . . . . . . . . . . .34
Setting the Audio Out Control . . . . . . . . . . . . . . .35
Using the TV Speaker Control
ON-SCREEN FEATURES
PICTURE MENU
Adjusting the Picture . . . . . . . . . . . . . . . . . . . . . .6
Turning on the Dynamic Noise
Reduction (DNR) Control . . . . . . . . . . . . . . . . . .7
Turning on the ImageMax Control . . . . . . . . . . . .8
The Convergence Control:
and Audio Outputs . . . . . . . . . . . . . . . . . . . . . .36
Using the Bass Boost Control . . . . . . . . . . . . . . .37
REMOTE CONTROL
Using AutoPicture . . . . . . . . . . . . . . . . . . . . . . . .38
Using AutoSound . . . . . . . . . . . . . . . . . . . . . . . .39
Using Surf, Alternate Channel,
•Converge Red/Blue . . . . . . . . . . . . . . . . . . . .9
•Converge Multipoint Red/Blue . . . . . . . .10–11
•Undo Multipoint . . . . . . . . . . . . . . . . . . . . .12
and Program List . . . . . . . . . . . . . . . . . . . . . . .40
Using the Sleep Timer Control . . . . . . . . . . . . . .41
Using the Volume Buttons . . . . . . . . . . . . . . . . . .42
Using the AV Button . . . . . . . . . . . . . . . . . . . . . .43
Setting the TV Remote to Work
FEATURES MENU
The Timer Control:
•Setting the Clock . . . . . . . . . . . . . . . . . . . . .13
•Setting the Start Time . . . . . . . . . . . . . . . . .14
•Setting the Stop Time . . . . . . . . . . . . . . . . .15
•Selecting the Channel . . . . . . . . . . . . . . . . .16
•Selecting the Tuner . . . . . . . . . . . . . . . . . . .17
•Setting the Activate Control . . . . . . . . . . . .18
•Constantly Displaying
Accessory Devices . . . . . . . . . . . . . . . . . . .44–48
THE PICTURE-IN-PICTURE (PIP) FEATURE
Using PIP (Basic Connections) . . . . . . . . . . . . . .49
Selecting the PIP Signal Source . . . . . . . . . . . . . .50
Using the PIP Remote Control Buttons . . . . . . . .51
Adjusting the PIP Color and Tint Controls . . . . .52
the Time on Screen . . . . . . . . . . . . . . . . . .19
The AutoLock Control:
•Understanding AutoLock . . . . . . . . . . . . . . .20
•Setting up the Access Code . . . . . . . . . . . . .21
•Blocking Channels . . . . . . . . . . . . . . . . . . .22
•Blocking by Movie Rating . . . . . . . . . . . . .23
•Blocking by TV Rating . . . . . . . . . . . . . . . .24
•Turning the Blocking Control
on or off . . . . . . . . . . . . . . . . . . . . . . . . . .25
•Blocking Unrated Broadcasts . . . . . . . . . . .26
•Blocking Broadcasts
GENERAL INFORMATION
Using Connection Options . . . . . . . . . . . . . . .53–54
Helpful Hints . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Glossary of Television Terms . . . . . . . . . . . . . . .56
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Factory Service Locations . . . . . . . . . . . . . . .58–59
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . .60
SETUP AND QUICK USE GUIDE
Refer to the simple Setup and Quick Use Guide
(supplied with your TV) for details on the
following:
That Have No Rating . . . . . . . . . . . . . . . .27
•Reviewing Your Settings . . . . . . . . . . . . . . .28
•Clearing All Blocked Channels . . . . . . . . . .29
Using the Closed Captioning Control . . . . . . . . .30
Projection
Television
Setup and Quick Use Guide
IMPORTANT
TABLE OF CONTENTS
NOTE: This owner's manual is used with several differ-
ent television models. Not all features (and drawings) dis-
cussed in this manual will necessarily match those found
with your television set. This is normal and does not
require that you contact your dealer or request service.
Getting Started
Warning/Important Notice
Basic TV Connections
1
1
1
2
1
5
10
2
9
3
8
4
7
6
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.1 On-screen Menu Controls
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.4
.
.
.
.1–2 How to Use the Installation Features
.5–7
.7–8
W
ARNING: TO PREVENT FIRE OR SHOCK HAZ-
ARD DO NOT EXPOSE THIS UNIT TO RAIN OR
EXCESSIVE MOISTURE.
Television and Remote Control Operation
.2–3 Connection Options for Accessory Devices
AutoChron, AutoPicture, AutoSound, and Incredible Surround are trademarks of Philips Consumer Electronics Company. Copyright
Consumer Electronics Company. All rights reserved.
©
2001 Philips
BASIC TV CONNECTIONS
ANTENNA OR
CABLE TV
SMART
HELP
Connect two lengths of
RF coaxial cable to the two
output plugs on the two-way
signal splitter. The two lengths
of RF coaxial cable must have
F-type connectors (screw-on or
push type) on their ends.
Connect one of the RF
Connect cable TV
a
coaxial cables coming from
two-way signal splitter to the
PIP ANT(enna) “B” input on
the back of the TV and the
other RF coaxial cable to the
ANT(enna) “A” input on the
signal to 75-ohm two-way
a
You can treat the
signal splitter (an optional
accessory).
See the next page for details
output connection of
lite receiver as you would
a
satel-
a
on connecting
verter box.
a
cable con-
•
•
•
•
•
Basic TV Connections
Or
standard antenna or cable TV
signal, except the satellite
signal should not be split as
shown in the illustration to
the right. The satellite signal
should go directly into the
ANT(enna) “A” input con-
nection on the back of the
ANTENNA
A
AND
B
INPUTS
Connect an outdoor or
indoor antenna signal to the
75-ohm two-way signal split-
ter. If your antenna has flat
twin-lead wire (300 ohm), you
must first attach the antenna
back of the TV
.
our TV has two separate
YANT(enna)/cable inputs
on the back of the set. These
two signal inputs offer conven-
ient hookup options for both
normal TV program viewing
and Picture-In-Picture (PIP)
features.
wires to the screws on 300-
a
TV Then, if you would like,
.
to 75-ohm adapter before con-
necting to the two-way signal
splitter.
use the PIP ANT(enna) “B”
input connection for either
an outdoor/indoor antenna or
cable TV signal. Refer to the
owner’s manual for the satel-
lite box to get further infor-
mation on connections.
Back of TV
The ANT(enna) “A” input is
Television and Remote Operation
On-screen Menu Controls
intended for use and viewing
on the TV’ main screen. our
s
Y
home’ primary antenna or
s
cable TV signal should be con-
nected to this input for normal
TV setup, use, and feature
operation.
Run Auto Program to store
in the TV’s memory only the
channels with active broad-
cast stations. See page
details.
5
for
Cable TV Signal
The PIP ANT(enna) “B”
Cable TV
Company
input is
signal source included for your
TV’ Picture-In-Picture (PIP)
feature. or many homes, the
use of single existing anten-
a
second, or auxiliary,
Ω
Ω
s
RF Coaxial
Cable
75Ω (Ohm)
F
NOTE: This owner's manual is used with several different tele-
vision models. Not all features (and illustrations) discussed here-
in will necessarily match your television set. This is normal and
does not require that you contact your dealer or request service.
a
PIP ANT(enna)
na or cable TV source for both
ANT(enna)“A” and PIP
“B” Input
ANT(enna) “B” will be the
preferred method of connection
(see illustration to the right).
This type of connection
(optional signal splitter
required) will work properly
Ω
2
OR
1
RF
Coaxial
Cables
3
Ω
for the TV’
features, as well as retain all
the features designed for PIP
or more details on PIP refer
to pages 49–52 in the
s
main on-screen
(The
has
T
wo-way Signal Splitter
a
single 75-ohm input and
How to Use the Installation Features
Connection Options for Accessory Devices
.
branches to twin 75-ohm outputs.
RF coaxial connecting cables will
be needed for use with the Two-
way Signal Splitter.)
F
,
ANT(enna)
“A” Input
300Ω (Ohm) to
75Ω (Ohm)
Adapter
Directions for Use manual that
came with your set.
SMART
HELP
Twin–lead Wire
Outdoor or Indoor Antenna
(Combination VHF/UHF)
Receives normal broadcast channels
2–13 (VHF) and 14–69 (UHF).
O
R
Contact your dealer,
or our Parts Information
Center at 1-800-851-8885 to
order the following acces-
sories: two-way signal split-
ter, RF coaxial cable, 300-
ohm to 75-ohm adapter,
combination VHF/UHF
antenna.
RF Coaxial Cable
75Ω (Ohm)
NOTE: Proper operation of your TV is not dependent upon the connection of the PIP ANT(enna) “B” input. The main purpose of the
input is to provide an easily connected, dedicated picture source for the PIP feature. ou can, however, use the PIP ANT(enna) “B” input to
connect and display other signal sources such as an outdoor or indoor antenna or video game player.
Y
a
Although the PIP ANT(enna) “B” input can be used and swapped as the source for the TV’s main picture, certain setup features (such
as AutoChron) are based only on your TV’s detecting signal at the ANT(enna) “A” input. To ensure that all features are operating proper-
ly, you may not want to rely solely on the PIP ANT(enna) “B” input as your TV’s main screen signal source.
a
3135 035 20251
1
Because of continuous product improvements, the information
mentioned in the documents accompanying your product are
subject to change without notice.
AutoLock, AutoPicture, AutoSound, ImageMax, and Incredible Surround are trademarks
of Philips Consumer Electronics Company. Copyright © 2001 Philips Consumer
Electronics Company. All rights reserved.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Audio/Video Jack Panel allows direct connections with VCRs, DVDs, or
other accessory devices, providing quality TV picture and sound playback.
Digital-Ready Projection TV
Audio Volume Leveler (AVL) Control keeps the TV sound at an even level.
Peaks and valleys that occur during program changes or commercial breaks
are reduced, making for a more consistent, comfortable sound.
This Projection Television is capable of connecting
to both the current analog television signals of today
as well as interfacing with new, upcoming digital
source playback products and devices. This TV
includes multiple signal connectors (Component
Video, S-Video, and Composite Video), which give
you a variety of equipment playback options for dig-
ital set-top boxes, satellite receivers, cable boxes,
and other digital devices.
AutoChron automatically sets the right time of day and maintains it with dig-
ital precision through brownouts, power failures, and even Daylight Savings
Time adjustments.
AutoLock allows you to block the viewing of certain channels or programs
with certain ratings if you do not want your children to view inappropriate
materials.
Auto Program scans for all available channels from regular antenna or cable
signals and stores only active broadcast stations in the TV’s memory.
While there may exist some digital devices with
connections not available on this television, you
should be adequately prepared for the vast majority
of products coming onto the digital consumer elec-
tronics’ market. NOTE: You should always use the
connection output on digital devices that gives the
highest level of picture quality possible. As listed
above, the Component Video (or Y PB PR) input
delivers the best color and picture reproduction, fol-
lowed by S-Video, and then Composite Video. In
addition to these inputs, your television also
AutoPicture allows you to push a button and adapt your television’s picture
to various types of programming, such as sports, movies, and multimedia
(games), as well as to the occurrence of a weak broadcast signal.
AutoSound allows you to select from three factory-set controls and a person-
al control that you set according to your own preferences through the on-
screen Sound menu. The three factory-set controls (Voice, Music, and
Theatre) enable you to tailor the TV sound to enhance the particular program-
ming you are watching.
Bass Boost increases the low-frequency range of the TV’s sound.
Channel Edit allows you to add or delete channels from the list stored in the
TV’s memory. Channel Edit makes it easy to limit or expand the number of
channels that are available to you when you press the Channel Scan (+,–) but-
tons on your remote control.
includes the standard 75-ohm cable signal connector
for use with antennas or analog cable boxes.
Closed Captioning allows the viewer to read TV program dialogue or voice
conversations as on-screen text.
Dynamic Noise Reduction (DNR) can help eliminate broadcast signal noise
(“speckles” in the picture).
Items Included with This TV
ImageMax helps you sharpen the picture quality by making dark portions of
the picture darker and lighter portions brighter.
As you unpack your TV, please note that this
Directions for Use manual contains the follow-
ing:
Incredible Surround boosts the TV’s sound, making it broader and fuller.
Infrared Remote Control works your TV and other remote-controlled
devices, such as VCRs, DVD players, cable converters, and satellite receivers.
• Safety Tip Information
• Factory Service Center Locations.
Also included with your set are the following:
• Warranty Registration Card
On-screen Menu shows helpful messages and instructions for adjusting or
setting TV feature controls (can be viewed in English, French, or Spanish).
Sleep Timer automatically turns the TV off after a set amount of time of your
choice.
• Remote Control Transmitter
Standard Broadcast (VHF/UHF) or Cable TV (CATV) channel capability
allows for viewing by antenna or cable.
• Batteries for Remote Control Use.
Stereo capability, including a built-in audio amplifier and twin-speaker sys-
tem, allows for the reception of TV programs broadcast in stereo sound.
Please take a few minutes to complete your reg-
istration card. The serial number for the TV is on
the back of the set.
Surf Button allows you to easily switch among only the channels that are of
interest to you (the ones that you have programmed into the TV’s Surf control
through the on-screen menu).
Refer to the back of this manual for instructions
in the cleaning and care of the TV.
Timer allows you to set your TV to turn itself on and off once or daily like an
alarm clock.
Two Tuners (ANT[enna] “A” and PIP ANT[enna] “B”) enable you to con-
nect two different broadcast signals to your TV at once. On screen these sig-
nal sources are referred to as “Tuner-A” and “Tuner-B.”
End-of-Life Disposal
Your new projection television and its packaging contain materials that can be recycled and reused. Specialized companies can
recycle your product to increase the amount of reusable materials and minimize the amounts that need to be properly disposed. The
batteries used by your product should not be thrown away when depleted but should be handed in and disposed of as small chemi-
cal waste. Please find out about the local regulations concerning how to dispose of your old television, batteries, and packaging
materials whenever it is time to replace them.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Menu • Adjusting the Picture
ADJUSTING THE PICTURE
o adjust your TV picture controls,
Tselect a channel and follow these
steps.
BEGIN
Press the MENU/SELECT button
on the remote control to show the on-
screen menu.
Press the CURSOR RING RIGHT.
BRIGHTNESS will be highlighted and
an adjustment bar will be shown to the
right.
PICTURE
SOUND
FEATURES
INSTALL
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
TINT
PICTURE
BRIGHTNESS
COLOR
30
Press the CURSOR RING RIGHT
or LEFT to adjust the BRIGHTNESS
level of the picture. Or press the CUR-
SOR RING DOWN to select another
picture control to adjust.
PICTURE
SHARPNESS
PICTURE
POWER
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
30
Press the STATUS/EXIT button to
remove the menu from the screen.
TV
VCR
UP
ACC
PICTURE
SWAP
PIP CH
SOURCE FREEZE
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
R
DN
3
2
PICTURE
SOUND
30
MENU/
STATUS/
EXIT
SELECT
PICTURE
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
TINT
SMART HELP
1
4
VOL
CH
30
When the bar scale
is centered, the
control settings are at normal, mid-
range levels. Picture adjustment con-
trols are described here.
3
1
4
7
2
3
6
PICTURE
5
8
0
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
TINT
9
TV/VCR
BRIGHTNESS—adds or subtracts
light from the darkest part of the
picture.
A/CH
SURF
0
POSITION
PIP
PICTURE
COLOR—adds or eliminates color.
COLOR
PICTURE
SHARPNESS
TINT
COLOR TEMP
PICTURE—improves the detail of
the lightest parts of the picture.
NORMAL
SHARPNESS—improves the detail
in the picture.
TINT—adjusts the picture to obtain
natural skin tones.
OR
COLOR TEMP
OR
COLOR TEMP
WARM
COOL
COLOR TEMP—offers NOR-
MAL, COOL, or WARM picture
preferences.
NORMAL—keeps whites, white.
COOL—makes whites, bluish.
WARM—makes whites, reddish.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Menu • The Dynamic Noise Reduction Control
TURNING ON THE DYNAMIC NOISE REDUCTION (DNR) CONTROL
ecause of poor cable reception or
Bother difficulties, the picture can
sometimes appear slightly “speckled”
(an indication of signal noise in the
picture). The DNR (Dynamic Noise
Reduction) control can help eliminate
this type of interference and improve
the quality of the picture.
PICTURE
SOUND
FEATURES
INSTALL
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
TINT
BEGIN
PICTURE
BRIGHTNESS
COLOR
Press the MENU/SELECT but-
ton on the remote to show the on-
screen menu.
30
PICTURE
SHARPNESS
TINT
Press the CURSOR RING
RIGHT to enter the PICTURE menu.
PICTURE
POWER
PICTURE
SHARPNESS
TINT
Press the CURSOR RING
DOWN repeatedly until the DNR
control is highlighted.
COLOR TEMP
DNR
ON
TV
VCR
UP
ACC
Press the CURSOR RING
RIGHT or LEFT to switch DNR ON
or OFF.
SWAP
PIP CH
SOURCE FREEZE
DN
4
OR
PICTURE
SOUND
2
DNR
OFF
Press the STATUS/EXIT button
MENU/
SELECT
STATUS/
EXIT
to remove the menu from the screen.
1
VOL
CH
1
4
7
2
5
8
0
3
6
9
TV/VCR
A/CH
SURF
POSITION
PIP
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Menu • The ImageMax Control
TURNING ON THE IMAGEMAX CONTROL
mageMax helps you sharpen the
Ipicture quality by making dark por-
tions of the picture darker and light
portions of the picture brighter.
Follow these steps to turn ImageMax
on.
BEGIN
PICTURE
SOUND
FEATURES
INSTALL
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
TINT
Press the MENU/SELECT but-
ton on the remote control to show the
on-screen menu.
PICTURE
BRIGHTNESS
COLOR
30
PICTURE
SHARPNESS
TINT
Press the CURSOR RING
RIGHT to enter the PICTURE menu.
Press the CURSOR RING
DOWN repeatedly until the IMAGE-
MAX control is highlighted.
PICTURE
POWER
SHARPNESS
TINT
COLOR TEMP
DNR
IMAGEMAX
ON
ON
Press the CURSOR RING
RIGHT or LEFTto switch between
ON and OFF.
TV
VCR
UP
ACC
SWAP
PIP CH
SOURCE FREEZE
DN
4
OR
Press the STATUS/EXIT button
to remove the menu from the screen.
PICTURE
SOUND
2
IMAGEMAX
OFF
MENU/
SELECT
STATUS/
EXIT
1
VOL
CH
1
4
7
2
5
8
0
3
6
9
TV/VCR
A/CH
SURF
POSITION
PIP
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Menu • The Convergence Control
CONVERGE RED/BLUE
he influence of magnetic fields
Tand changes in the position of the
TV may cause screen colors not to
line up properly. The result on your
TV screen will be red or blue colors
appearing around the edges of
images.
PICTURE
TINT
COLOR TEMP
DNR
IMAGEMAX
CONVERGENCE
CONVERGE RED
CONVERGE BLUE
MULTIPOINT RED
MULTIPOINT BLUE
SAVE MULTIPOINT
PICTURE
CONVERGENCE
If various images on the entire picture
have red outlines, adjust the CON-
VERGE RED control. Then if any red
outlines remain, adjust the MULTI-
POINT RED control.
CONVERGE RED
CONVERGE BLUE
MULTIPOINT RED
MULTIPOINT BLUE
SAVE MULTIPOINT
If various images on the entire picture
have blue outlines, adjust the CON-
VERGE BLUE control. Then if any
blue outlines remain, adjust the MUL-
TIPOINT BLUE control.
POWER
CONVERGE RED
Use the UNDO MULTIPOINT control
if you want to restore the picture
screen to the way it was before you
made Multipoint adjustments.
TV
VCR
UP
ACC
5
SWAP
PIP CH
SOURCE FREEZE
DN
4
PICTURE
SOUND
2
CONVERGE RED
MENU/
STATUS/
NOTE: After turning the TV set on,
allow it to warm up for 15 minutes
before adjusting the Convergence
controls.
SELECT
EXIT
1
VOL
CH
BEGIN
1
4
7
2
5
8
0
3
Press the MENU/SELECT but-
ton on the remote control to show the
on-screen menu.
SMART HELP
6
You can adjust the CON-
VERGE BLUE control the
same way you would the CON-
VERGE RED control.
9
TV/VCR
A/CH
SURF
Press the CURSOR RING
RIGHT to enter the PICTURE menu.
POSITION
PIP
Press the CURSOR RING
DOWN repeatedly until CONVER-
GENCE is selected.
Press the CURSOR RING
RIGHT to enter the CONVER-
GENCE menu.
Press the CURSOR RING
RIGHT to enter CONVERGE RED
mode.
PICTURE
CONVERGENCE
CONVERGE RED
CONVERGE BLUE
MULTIPOINT RED
MULTIPOINT BLUE
SAVE MULTIPOINT
CONVERGE BLUE
CONVERGE BLUE
Press the CURSOR RING
LEFT, RIGHT, UP, or DOWN to
adjust the cross image until the color
outline around it is gone.
Press the STATUS/EXIT button
to exit the menu from the screen.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Menu • The Convergence Control
CONVERGE MULTIPOINT RED/BLUE
f various images on the entire pic-
Iture have red outlines, adjust the
CONVERGE RED control. Then if
any red outlines remain, adjust the
MULTIPOINT RED control.
Likewise, if various images on the
entire picture have blue outlines,
adjust the CONVERGE BLUE con-
trol. Then if any blue outlines remain,
adjust the MULTIPOINT BLUE con-
trol.
PICTURE
TINT
COLOR TEMP
DNR
IMAGEMAX
CONVERGENCE
CONVERGE RED
CONVERGE BLUE
MULTIPOINT RED
MULTIPOINT BLUE
SAVE MULTIPOINT
PICTURE
CONVERGENCE
Use the UNDO MULTIPOINT control
if you want to restore the picture
screen to the way it was before you
made Multipoint adjustments.
CONVERGE RED
CONVERGE BLUE
MULTIPOINT RED
MULTIPOINT BLUE
SAVE MULTIPOINT
PICTURE
CONVERGENCE
NOTE: After turning the TV set on,
allow it to warm up for 15 minutes
before adjusting the Convergence
controls.
POWER
CONVERGE RED
CONVERGE BLUE
MULTIPOINT RED
▲
MULTIPOINT BLUE
SAVE MULTIPOINT
É
BEGIN
TV
VCR
UP
ACC
SWAP
PIP CH
SOURCE FREEZE
Press the MENU/SELECT but-
ton on the remote control to show the
on-screen menu.
DN
6
PICTURE
SOUND
4
2
M
SE
7
Press the CURSOR RING
RIGHT to enter the PICTURE menu.
NAVIGATE
EXIT: ADJUST
•
1
NOTE: To display three cross images hidden
by the on-screen text, simply navigate to the
bottom row and the cross images will be
shown.
VOL
CH
Press the CURSOR RING
DOWN repeatedly until CONVER-
GENCE is selected.
1
4
7
2
5
8
0
3
6
Press the CURSOR RING
RIGHT to enter the CONVER-
GENCE menu.
9
TV/VCR
A/CH
SURF
Press the CURSOR RING
DOWN repeatedly until MULTI-
POINT RED is selected.
POSITION
PIP
Press the CURSOR RING
RIGHT to enter NAVIGATE mode.
Press the CURSOR RING
LEFT, RIGHT, UP, or DOWN to
move to a cross image that has a color
outline.
Go to step 8 on the next page.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Menu • The Convergence Control
CONVERGE MULTIPOINT RED/BLUE
Press the STATUS/EXIT button
to enter the ADJUST mode.
Press the CURSOR RING LEFT,
RIGHT, UP, or DOWN to adjust the
cross image until the color outline is
gone.
Press the STATUS/EXIT button
to return to NAVIGATE mode.
10
Repeat steps 7–10 until all misaligned
crosses have been adjusted.
Press the MENU/SELECT but-
ton to return to the CONVERGENCE
11
• ADJUST
EXIT: NAVIGATE
menu.
• NAVIGATE
EXIT: ADJUST
Press the CURSOR RING
DOWN repeatedly until SAVE MUL-
12
PICTURE
CONVERGENCE
POWER
CONVERGE RED
CONVERGE BLUE
MULTIPOINT RED
MULTIPOINT BLUE
SAVE MULTIPOINT
TIPOINT is selected.
13
Press the CURSOR RING
RIGHT to activate the storing of the
Multipoint adjustments you have
made.
TV
VCR
PIP CH
ACC
SWAP
SOURCE FREEZE
PICTURE
CONVERGENCE
DN
UP
PICTURE
SOUND
CONVERGE RED
CONVERGE BLUE
MULTIPOINT RED
MULTIPOINT BLUE
SAVE MULTIPOINT
14
Press the STATUS/EXIT button
to remove the menu from the screen.
9
13
US/
EXIT
SELT
8
PICTURE
CONVERGENCE
11
VOL
CH
10
14
CONVERGE RED
CONVERGE BLUE
MULTIPOINT RED
MULTIPOINT BLUE
SAVE MULTIPOINT
1
4
7
2
5
8
0
3
6
SMART HELP
STORED
You can adjust the MULTI-
POINT BLUE control in the
way you would adjust the MULTI-
POINT RED control.
9
TV/VCR
A/CH
SURF
POSITION
PIP
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Menu • The Convergence Control
UNDO MULTIPOINT
he UNDO MULTIPOINT control
Tallows you to restore the TV’s pic-
ture screen to the way it was before
you made Multipoint adjustments.
BEGIN
Press the MENU/SELECT but-
ton on the remote control to show the
on-screen menu.
PICTURE
TINT
COLOR TEMP
DNR
IMAGEMAX
CONVERGENCE
CONVERGE RED
CONVERGE BLUE
MULTIPOINT RED
MULTIPOINT BLUE
SAVE MULTIPOINT
Press the CURSOR RING
RIGHT to enter the PICTURE menu.
PICTURE
CONVERGENCE
CONVERGE RED
CONVERGE BLUE
MULTIPOINT RED
MULTIPOINT BLUE
SAVE MULTIPOINT
Press the CURSOR RING
DOWN repeatedly until CONVER-
GENCE is selected.
Press the CURSOR RING
RIGHT to enter the CONVER-
GENCE menu.
PICTURE
CONVERGENCE
POWER
CONVERGE BLUE
MULTIPOINT RED
MULTIPOINT BLUE
SAVE MULTIPOINT
UNDO MULTIPOINT
Press the CURSOR RING
DOWN repeatedly until UNDO
MULTIPOINT is selected.
TV
VCR
UP
ACC
SWAP
PIP CH
SOURCE FREEZE
PICTURE
DN
CONVERGENCE
6
PICTURE
SOUND
Press the CURSOR RING
RIGHT to activate the restoring of
the previous picture screen.
CONVERGE BLUE
MULTIPOINT RED
MULTIPOINT BLUE
SAVE MULTIPOINT
UNDO MULTIPOINT
4
2
ME
SE
STATUS/
EXIT
RESTORED
Press the STATUS/EXIT button
to remove the menu from the screen.
7
M
1
VOL
CH
1
4
7
2
5
8
0
3
6
9
TV/VCR
A/CH
SURF
POSITION
PIP
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Features Menu • The Timer Control
12
11
1
2
10
9
3
8
4
SETTING THE CLOCK
7
5
6
our television comes with an on-
Yscreen clock. During normal opera-
tion, the clock appears on the screen
when the STATUS/EXIT button is pressed
or if the TIMER DISPLAY control is
turned ON.
BEGIN
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AUTOLOCK
PIP
CLOSED CAP
Press the MENU/SELECT button
on the remote control to show the on-
screen menu.
FEATURES
TIMER
TIMER
TIME
AUTOLOCK
PIP
CLOSED CAP
START TIME
STOP TIME
CHANNEL
TUNER MODE
Press the CURSOR RING DOWN
twice to highlight FEATURES.
Press the CURSOR RING RIGHT
to enter the FEATURES menu.
FEATURES
TIMER
POWER
TIME
_ _:_ _
Press the CURSOR RING RIGHT
again to shift the display left and high-
light the TIME control.
START TIME
STOP TIME
CHANNEL
TUNER MODE
TV
VCR
UP
ACC
SWAP
PIP CH
SOURCE FREEZE
Press the CURSOR RING RIGHT
again to highlight the time indicator area.
7
DN
FEATURES
TIMER
PICTURE
SO
TIME
8:00 PM
8
Press the NUMBER buttons to
enter the correct time. If you make a
mistake entering the time, use the CUR-
SOR RING LEFT or RIGHT to move
among the input slots to make correc-
tions. NOTE: You may also use the
CURSOR RING UP or DOWN to cycle
through digits to input the time.
START TIME
STOP TIME
CHANNEL
TUNER MODE
STATUS/
EXIT
MUTE
1
CH
2
1
4
7
2
5
8
0
3
6
Press the CURSOR RING UP or
DOWN to select AM or PM.
9
6
TV/VCR
A/CH
SURF
Press the STATUS/EXIT button to
remove the menu from the screen.
NOTE: The TIME (Clock) feature
can be accessed directly by press-
ing the CLOCK button on the
remote control and following steps
5Ð10 to complete the task.
POSITION
PIP
SMART HELP
A/CH
SURF
0
FEATURES
TIMER
• For single-digit entries, be
sure to press 0 first and
then the hour number.
REC •
CC
SLEEP
CLEAR
TIME
_ _:_ _
AV
INC.SUR PROG.LIST
START TIME
STOP TIME
CHANNEL
TUNER MODE
• If you’d like, set the clock automati-
cally using the AutoChron feature
(page 6, Setup and Quick Use
Guide).
POSITION
PIP
• Clock settings may be lost when the
TV is unplugged or when AC power
to the set is interrupted.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Features Menu • The Timer Control
12
11
1
2
10
9
3
8
4
7
5
SETTING THE START TIME
6
ou can set the TV to turn itself on
Yat a specific time, just as you
would an alarm clock. Follow these
steps to set the Start Time.
BEGIN
Press the MENU/SELECT but-
ton on the remote control to show the
on-screen menu.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
Press the CURSOR RING
DOWN twice to highlight FEA-
TURES.
AUTOLOCK
PIP
CLOSED CAP
FEATURES
TIMER
TIME
AUTOLOCK
PIP
CLOSED CAP
START TIME
STOP TIME
CHANNEL
TUNER MODE
Press the CURSOR RING
RIGHT to enter the FEATURES
menu.
FEATURES
TIMER
POWER
Press the CURSOR RING
RIGHT again. Then press the CUR-
SOR RING DOWN once to high-
light the START TIME control.
TIME
8:01 PM
START TIME
STOP TIME
CHANNEL
TUNER MODE
TV
VCR
PIP CH
ACC
SWAP
DN
SOURCE FREEZE
Press the CURSOR RING
RIGHT again to highlight the time
indicator area.
UP
FEATURES
TIMER
5
PICTURE
UND
7
4
TIME
3
START TIME
STOP TIME
CHANNEL
TUNER MODE
_ _:_ _
M
SE
STATUS/
EXIT
Press the NUMBER buttons to
enter the correct time. If you make a
mistake entering the time, use the
CURSOR RING LEFT or RIGHT to
move among the time input slots to
make corrections. NOTE: You can
also use the CURSOR RING UP or
DOWN to cycle through digits to
input the time.
M
1
VOL
CH
FEATURES
TIMER
2
TIME
4 2
1
4
7
3
6
START TIME
STOP TIME
CHANNEL
TUNER MODE
8:00 AM
5
8
0
9
TV/VCR
A/CH
SURF
Press the CURSOR RING UP or
DOWN to select AM or PM.
POSITION
PIP
Press the STATUS/EXIT button to
remove the menu from the screen.
SMART HELP
You can set STOP TIME
similarly to the way you set
START TIME. Instructions are on
the next page.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Features Menu • The Timer Control
12
11
1
2
10
9
3
8
4
7
5
SETTING THE STOP TIME
6
se the START TIME control to
Uset the TV to turn itself on at a
specific time (see the previous page).
The following steps will guide you in
setting the TV to turn itself off.
BEGIN
Press the MENU/SELECT but-
ton on the remote control to show
the on-screen menu.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AUTOLOCK
PIP
CLOSED CAP
Press the CURSOR RING
DOWN twice to highlight FEA-
TURES.
FEATURES
TIMER
TIME
AUTOLOCK
PIP
CLOSED CAP
START TIME
STOP TIME
CHANNEL
TUNER MODE
Press the CURSOR RING
RIGHT to enter the FEATURES
menu.
FEATURES
TIMER
POWER
Press the CURSOR RING
RIGHT again. Then press the
CURSOR RING DOWN twice to
highlight the STOP TIME control.
TIME
8:02 PM
START TIME
STOP TIME
CHANNEL
TUNER MODE
TV
VCR
PIP CH
ACC
SWAP
DN
SOURCE FREEZE
5
UP
4
Press the CURSOR RING
RIGHT to highlight the time indica-
tor area.
FEATURES
TIMER
PICTURE
SOUND
3
TIME
START TIME
STOP TIME
CHANNEL
TUNER MODE
MENU/
S/
T
7
SELECT
_ _:_ _
Press the NUMBER buttons to
enter the correct time. If you make a
mistake entering the time, use the
CURSOR RING LEFT or RIGHT to
move among the input slots to make
corrections. NOTE: You can also use
the CURSOR RING UP or DOWN to
cycle through digits to input the time.
M
1
VOL
CH
8
TIMER
2
TIME
START TIME
4
1
4
7
2
5
8
0
3
6
STOP TIME
CHANNEL
TUNER MODE
9:30 AM
9
TV/VCR
A/CH
6
SURF
Press the CURSOR RING UP or
DOWN to select AM or PM.
POSITION
PIP
Press the STATUS/EXIT button
to remove the menu from the screen.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Features Menu • The Timer Control
12
11
1
2
10
9
3
8
4
7
5
SELECTING THE CHANNEL
6
ou can select a specific channel
Ythat the television will tune to
when the timer turns the set on.
Follow these steps to select the chan-
nel.
BEGIN
Press the MENU/SELECT but-
ton on the remote control to show the
on-screen menu.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AUTOLOCK
PIP
CLOSED CAP
FEATURES
TIMER
TIME
Press the CURSOR RING
DOWN twice to highlight FEA-
TURES.
AUTOLOCK
PIP
CLOSED CAP
START TIME
STOP TIME
CHANNEL
TUNER MODE
Press the CURSOR RING
RIGHT to enter the FEATURES
menu.
FEATURES
TIMER
POWER
TIME
8:03 PM
START TIME
STOP TIME
CHANNEL
Press the CURSOR RING
RIGHT. Then press the CURSOR
RING DOWN repeatedly until the
CHANNEL control is highlighted.
TUNER MODE
TV
VCR
PIP CH
ACC
SWAP
DN
SOURCE FREEZE
UP
4
FEATURES
TIMER
PICTURE
SOUND
3
Press the NUMBER buttons to
enter the desired start-up channel. Or
press the CURSOR RING RIGHT
repeatedly to enter the start-up channel
you want.
TIME
START TIME
STOP TIME
CHANNEL
TUNER MODE
MENU/
STATUS/
EXIT
SELECT
12
M
1
VOL
CH
6
FEATURES
TIMER
2
Press the STATUS/EXIT button
to remove the menu from the screen.
4
TIME
START TIME
STOP TIME
CHANNEL
TUNER MODE
1
4
7
2
5
8
0
3
6
10:30 AM
12
9
TV/VCR
A/CH
SURF
POSITION
PIP
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Features Menu • The Timer Control
12
11
1
2
10
9
3
8
4
7
5
SELECTING THE TUNER
6
sing the START TIME feature,
Uyou can select either TUNER A
(ANT[enna] “A”) or TUNER B (PIP
ANT[enna] “B”) to be the main sig-
nal source when the TV is powered
on.
BEGIN
Press the MENU/SELECT but-
ton on the remote control to show the
on-screen menu.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AUTOLOCK
PIP
CLOSED CAP
FEATURES
TIMER
TIME
AUTOLOCK
PIP
CLOSED CAP
START TIME
STOP TIME
CHANNEL
TUNER MODE
Press the CURSOR RING
DOWN twice to highlight FEA-
TURES.
Press the CURSOR RING
RIGHT to enter the FEATURES
menu.
FEATURES
TIMER
POWER
TIME
8:04 PM
START TIME
STOP TIME
CHANNEL
Press the CURSOR RING
RIGHT. Then press the CURSOR
RING DOWN repeatedly until the
TUNER MODE control is highlight-
ed.
TUNER MODE
TV
VCR
PIP CH
ACC
SWAP
DN
SOURCE FREEZE
5
UP
4
FEATURES
TIMER
PICTURE
SOUND
3
TIME
START TIME
10:30 AM
MENU/
SELECT
STATUS/
EXIT
STOP TIME
CHANNEL
TUNER MODE
Press the CURSOR RING
RIGHT or LEFT to select A or B.
A
M
1
VOL
CH
Press the STATUS/EXIT button
to remove the menu from the screen.
OR
TUNER MODE
B
1
4
7
2
5
8
0
3
6
9
TV/VCR
A/CH
SURF
POSITION
PIP
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Features Menu • The Timer Control
12
11
1
2
10
9
3
8
4
7
5
SETTING THE ACTIVATE CONTROL
6
fter you have set the Time, Start
ATime, Stop Time, and Start
Channel, you must activate the Timer
for it to operate. Your options are to
set the Timer to work ONCE or
DAILY. Set ACTIVATE to OFF if you
don’t want to use the Timer.
BEGIN
Press the MENU/SELECT but-
ton on the remote control to show the
on-screen menu.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AUTOLOCK
PIP
CLOSED CAP
FEATURES
TIMER
Press the CURSOR RING
DOWN twice to highlight FEA-
TURES.
TIME
AUTOLOCK
PIP
CLOSED CAP
START TIME
STOP TIME
CHANNEL
TUNER MODE
Press the CURSOR RING
RIGHT to enter the FEATURES
menu.
FEATURES
TIMER
POWER
TIME
8:05 PM
START TIME
STOP TIME
CHANNEL
Press the CURSOR RING
RIGHT again. Then press the CUR-
SOR RING DOWN repeatedly until
the ACTIVATE control is highlighted.
TUNER MODE
TV
VCR
PIP CH
ACC
SWAP
DN
SOURCE FREEZE
5
UP
4
FEATURES
TIMER
PICTURE
SOUND
3
Press the CURSOR RING
RIGHT again to set ACTIVATE to
ONCE, press the CURSOR RING
RIGHT again for DAILY, or press
the CURSOR RING RIGHT again
to toggle ACTIVATE to OFF.
START TIME
STOP TIME
CHANNEL
TUNER MODE
ACTIVATE
MENU/
STATUS/
EXIT
SELECT
6
OFF
M
1
VOL
CH
OR
Press the STATUS/EXIT button
to remove the menu from the screen.
1
4
7
2
5
8
0
3
6
ACTIVATE
ACTIVATE
ONCE
OR
DAILY
9
TV/VCR
A/CH
SURF
SMART HELP
POSITION
PIP
Before you set the
TIMER controls, you must
set the TV’s clock manually with-
in the Timer menu (see page 13)
or by using the AutoChron feature
described on page 6 of the Setup
and Quick Use Guide.
Try it! After following the steps
on pages 13–19, use your TV to
wake you up like a clock radio.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Features Menu • The Timer Control
12
11
1
2
10
9
3
8
4
7
5
CONSTANTLY DISPLAYING THE TIME ON SCREEN
6
fter you have set the TV’s clock,
Ayou can use your TV to keep up
with the time. The TIMER DISPLAY
control allows you to permanently dis-
play the time in the upper right corner
of the screen.
BEGIN
Press the MENU/SELECT but-
ton on the remote control to show the
on-screen menu.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AUTOLOCK
PIP
CLOSED CAP
FEATURES
TIMER
TIME
AUTOLOCK
PIP
CLOSED CAP
START TIME
STOP TIME
CHANNEL
TUNER MODE
Press the CURSOR RING
DOWN twice to highlight FEA-
TURES.
FEATURES
TIMER
Press the CURSOR RING
RIGHT to enter the FEATURES
menu.
POWER
TIME
8:06 PM
START TIME
STOP TIME
CHANNEL
Press the CURSOR RING
TUNER MODE
TV
VCR
PIP CH
ACC
RIGHT again. Then press the CUR-
SOR RING DOWN repeatedly until
the DISPLAY control is highlighted.
SWAP
SOURCE FREEZE
5
DN
UP
4
FEATURES
TIMER
PICTURE
SOUND
3
STOP TIME
Press the CURSOR RING
RIGHT or LEFT to turn the TIMER
DISPLAY ON or OFF.
MENU/
SELECT
STATUS/
EXIT
CHANNEL
TUNER MODE
ACTIVATE
DISPLAY
ON
M
1
VOL
CH
Press the STATUS/EXIT button
to remove the menu from the screen.
OR
DISPLAY
OFF
1
4
7
2
5
8
0
3
6
9
TV/VCR
A/CH
SURF
POSITION
PIP
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Features Menu • The AutoLock Control
UNDERSTANDING AUTOLOCK
he AutoLock feature can help par-
Tents censor what their children
watch on TV. AutoLock receives con-
tent advisories sent by broadcasters or
other program providers. After you
program AutoLock, it can respond to
the content advisories and block pro-
grams that contain content which you
may consider objectionable—offensive
language, violence, or sexual situa-
tions.
AUTOLOCK
TV RATING
TV-Y
AUTOLOCK
MOVIE RATING
ON
G
PG
PG-13
R
NC-17
ON
TV-Y7
TV-G
TV-PG
TV-14
In this section, you’ll learn how to
block channels and programming that
is not rated, is unrated, or has no rat-
ing. You will also find out how to turn
these blocking features on or off.
Following on this page are brief expla-
nations of AutoLock terms and pro-
gram ratings.
MOVIE RATINGS
(MOTION PICTURE ASSOCIATION
OF AMERICA)
TV PARENTAL GUIDELINES
(TV BROADCASTERS)
G (General Audience)—all ages admitted.
Most parents will find programs that are
rated G to be suitable for children of all
ages. Such programs have little or no vio-
lence, no strong language, and little or no
sexual dialogue or sexual situations.
TV-Y (All Children)—designed to be
TV
Terms
appropriate for all children, especially
Y ones ages 2–6. Programs rated TV-Y
BLOCKING control—can be thought
of as the “master switch” for
are not expected to frighten younger children.
AutoLock. This control affects the set-
tings you have chosen for blocking
programs according to movie ratings
or TV ratings, or for blocking pro-
grams that have no rating or are unrat-
ed. When the BLOCKING control is
OFF, the blocking or censoring of pro-
grams is disabled. When the BLOCK-
ING control is ON, blocking will
occur according to the settings you
have chosen.
TV-Y7 (Directed to Older
TV
Children)—designed for children ages
Y7 7 and older. Programs rated TV-Y7
PG (Parental Guidance Suggested)—
contain material that parents may find
unsuitable for younger children. Programs
that are rated PG have one or more of the
following: moderate violence, some sexual
situations, infrequent coarse language, or
some suggestive dialogue.
may be more appropriate for children who
have acquired the development skills needed
to distinguish between make-believe and reali-
ty. Such programs may include mild fantasy
and comic violence (FV).
TV-G (General Audience)—most par-
TV
PG-13 (Parents Strongly Cautioned)—
contain material that parents may find
unsuitable for children under the age of 13.
Programs that are rated PG-13 have one or
more of the following: violence, sexual situ-
ations, coarse language, or suggestive dia-
logue.
ents will consider programs that are
BLOCK UNRATED control—if set
to ON, blocks all unrated programs.
Unrated programming consists of the
kind of shows that the MPAA (Motion
Picture Association of America) or the
TV broadcasters have chosen not to
rate.
Grated TV-G to be suitable for children
of all ages. Such programs have little or no
violence, no strong language, and little or no
sexual dialogue or sexual situations.
TV-PG (Parental Guidance
Suggested)—contain material that par-
ents may find unsuitable for younger
TV
PG
R (Restricted)—specifically designed for
adults. Anyone under the age of 17 should
view programs that are rated R only with an
accompanying parent or adult guardian.
Such programs have one or more of the fol-
lowing: intense violence; intense sexual situ-
ations; strong, coarse language; or intensely
suggestive dialogue.
NO RATING control—if set to ON,
blocks all programming with no con-
tent advisory data.
Programming that has No Rating is not
encoded with any rating information
from the MPAA or the Parental
Guidelines. Any programming could
fall into this category.
children. This type of programming has one or
more of the following: moderate violence (V),
some sexual situations (S), infrequent coarse
language (L), or some suggestive dialogue
(D).
TV-14 (Parents Strongly
TV
Cautioned—contain material that
14 many parents will find unsuitable for
NC-17 (No one under the age of 17 will be
admitted)—should be viewed by adults
only. Programs that are rated NC-17 have
graphic violence; explicit sex; or crude,
indecent language.
You can also block individual chan-
nels using the BLOCK CHANNEL
control.
children under 14 years of age. Such programs
have one or more of the following: intense
violence (V); intense sexual situations (S);
strong, coarse language (L); or intensely sug-
gestive dialogue (D).
X (Adults Only)—contain one or more of
the following: very graphic violence, very
graphic and explicit or indecent sexual acts,
or very coarse and intensely suggestive lan-
guage.
TV-MA (Mature Audience Only)—
specifically designed to be viewed by
adults and therefore may be unsuitable
TV
MA
for children under 17. Such programs have
one or more of the following: graphic violence
(V); explicit sexual situations (S); or crude,
indecent language (L).
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Features Menu • The AutoLock Control
SETTING UP THE ACCESS CODE
utoLockallows parents to block
Achannels they think children
should not watch. A channel blocked
by the AUTOLOCK control cannot be
viewed until a correct access code is
used to unlock the channel for view-
ing. Follow these steps to set up your
Access Code.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AUTOLOCK
PIP
CLOSED CAP
FEATURES
TIMER
AUTOLOCK
PIP
CLOSED CAP
TIME
START TIME
STOP TIME
CHANNEL
TUNER MODE
BEGIN
Press the MENU/SELECT but-
ton on the remote control to show the
on-screen menu.
FEATURES
TIMER
AUTOLOCK
PIP
CLOSED CAP
POWER
ACCESS CODE
- - - -
Press the CURSOR RING
DOWN twice to highlight FEA-
TURES.
TV
VCR
PIP CH
ACC
SWAP
DN
SOURCE FREEZE
UP
FEATURES
TIMER
AUTOLOCK
PIP
CLOSED CAP
4
PICTURE
SOUND
ACCESS CODE
- - - -
3
Press the CURSOR RING
RIGHT. Then press the CURSOR
RING DOWN once to highlight the
AUTOLOCK control.
MENU/
STATUS/
EXIT
SELECT
9
M
1
VOL
CH
Press the CURSOR RING
RIGHT to highlight ACCESS
CODE.
FEATURES
TIMER
AUTOLOCK
PIP
CLOSED CAP
1
4
7
2
5
8
0
3
6
ACCESS CODE
X X X X
5
7
Press 0,7,1,1 on the remote con-
trol. INCORRECT will appear on the
screen.
9
6
8
TV/VCR
A/CH
SURF
POSITION
PIP
Press 0,7,1,1 on the remote con-
trol again. ENTER NEW CODE will
appear on the screen.
FEATURES
TIMER
FEATURES
TIMER
AUTOLOCK
PIP
CLOSED CAP
FEATURES
TIMER
AUTOLOCK
PIP
CLOSED CAP
ACCESS CODE
- - - -
ACCESS CODE
X X X X
ACCESS CODE
X X X X
INCORRECT
AUTOLOCK
PIP
CLOSED CAP
Enter a new four-digit code
using the number buttons. CONFIRM
CODE will appear on the screen.
Enter your new four-digit code
again. CORRECT will flash on the
screen briefly.
FEATURES
TIMER
AUTOLOCK
PIP
CLOSED CAP
FEATURES
TIMER
AUTOLOCK
PIP
CLOSED CAP
FEATURES
TIMER
AUTOLOCK
PIP
CLOSED CAP
CONFIRM
CODE
- - - -
ENTER
NEW CODE
- - - -
ENTER
NEW CODE
X X X X
Press the STATUS/EXIT button
to remove the menu from the screen.
SMART HELP
Parents, it isn’t possible for
your child to unblock a chan-
nel without knowing your access
code or changing it to a new one. If
you discover that your access code
has been changed, you can assume
that blocked channels may have
been viewed.
FEATURES
TIMER
AUTOLOCK
PIP
CLOSED CAP
FEATURES
TIMER
AUTOLOCK
PIP
CLOSED CAP
CONFIRM
CODE
X X X X
CONFIRM
CODE
X X X X
CORRECT
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Features Menu • The AutoLock Control
BLOCKING CHANNELS
fter you have set your personal
Aaccess code (see the previous
page), you are ready to select the
channels or program sources you
want to block.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AUTOLOCK
PIP
CLOSED CAP
FEATURES
TIMER
AUTOLOCK
PIP
CLOSED CAP
TIME
START TIME
STOP TIME
CHANNEL
TUNER MODE
BEGIN
Press the MENU/SELECT but-
ton on the remote control to show the
on-screen menu.
FEATURES
TIMER
AUTOLOCK
PIP
CLOSED CAP
POWER
ACCESS CODE
- - - -
Press the CURSOR RING
DOWN twice to highlight FEA-
TURES.
7
TV
SWAP
R
ACC
8
4
SOURCE FREEZE
6
DN
Press the CURSOR RING
RIGHT. Then press the CURSOR
RING DOWN once to highlight the
AUTOLOCK control.
FEATURES
TIMER
PICTURE
SOUND
3
ACCESS CODE
- - - -
AUTOLOCK
PIP
CLOSED CAP
9
MENU/
SELECT
STATUS/
EXIT
Press the CURSOR RING
RIGHT again to highlight ACCESS
CODE.
M
1
VOL
CH
FEATURES
TIMER
AUTOLOCK
PIP
CLOSED CAP
1
4
7
2
5
8
0
3
6
ACCESS CODE
X X X X
Enter your four-digit ACCESS
CODE. CORRECT will flash very
briefly and the menu will move to the
left with BLOCK CHANNEL high-
lighted.
9
TV/VCR
A/CH
SURF
POSITION
PIP
Press the CURSOR RING
RIGHT to highlight the TV’s avail-
able channels.
FEATURES
AUTOLOCK
BLOCK CHANNEL
AV2
AV3
ALL
1
SETUP CODE
CLEAR ALL
MOVIE RATING
TV RATING
Press the CURSOR RING UP or
DOWN to highlight the channel you
want to block.
2
Press the CURSOR RING
RIGHT to block the channel. A pad-
lock image will appear to the right of
the channel number.
FEATURES
AUTOLOCK
BLOCK CHANNEL
FEATURES
AUTOLOCK
BLOCK CHANNEL
FEATURES
AUTOLOCK
BLOCK CHANNEL
AV2
AV3
ALL
1
AV2
AV3
ALL
1
12
13
14
15
16
SETUP CODE
CLEAR ALL
MOVIE RATING
TV RATING
SETUP CODE
CLEAR ALL
MOVIE RATING
TV RATING
SETUP CODE
CLEAR ALL
MOVIE RATING
TV RATING
Repeat steps 7 and 8 for any channels
you want to block from viewing.
2
2
Press the STATUS/EXIT button
to remove the menu from the screen.
FEATURES
AUTOLOCK
BLOCK CHANNEL
12
13
14
15
16
SETUP CODE
CLEAR ALL
MOVIE RATING
TV RATING
SMART HELP
Use BLOCK CHANNEL to
prevent the viewing of programs
coming from a VCR, DVD, or other
accessory device connected to any of
the inputs on the TV.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Features Menu • The AutoLock Control
BLOCKING BY MOVIE RATING
fter you have set your personal
Aaccess code (see page 21), you
can block programs by specific movie
ratings.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AUTOLOCK
PIP
CLOSED CAP
BEGIN
FEATURES
TIMER
TIME
AUTOLOCK
PIP
CLOSED CAP
START TIME
STOP TIME
CHANNEL
TUNER MODE
Press the MENU/SELECT but-
ton on the remote control to show the
on-screen menu.
Press the CURSOR RING
DOWN twice to highlight FEA-
TURES.
FEATURES
TIMER
AUTOLOCK
PIP
CLOSED CAP
POWER
ACCESS CODE
- - - -
Press the CURSOR RING
RIGHT. Then press the CURSOR
RING DOWN once to highlight the
AUTOLOCK control.
TV
VC
ACC
8
4
SWAP
PIP CH
RCE FREEZE
7
DN
FEATURES
TIMER
AUTOLOCK
PIP
CLOSED CAP
PICTURE
SOUND
3
ACCESS CODE
- - - -
Press the CURSOR RING
RIGHT again to highlight ACCESS
CODE.
MENU/
STATUS/
EXIT
SELECT
9
M
VOL
CH
Enter your four-digit ACCESS
CODE. CORRECT will flash very
briefly in red and the menu will move
to the left with BLOCK CHANNEL
highlighted.
FEATURES
TIMER
AUTOLOCK
PIP
CLOSED CAP
1
4
7
5
8
0
3
6
ACCESS CODE
X X X X
9
TV/VCR
A/CH
SURF
Press the CURSOR RING
DOWN repeatedly until MOVIE
RATING is highlighted.
POSITION
PIP
FEATURES
AUTOLOCK
BLOCK CHANNEL
Press the CURSOR RING
RIGHT and the Rating menu will
shift to the left with G highlighted.
AV2
AV3
ALL
1
SETUP CODE
CLEAR ALL
MOVIE RATING
TV RATING
2
Press the CURSOR RING UP or
DOWN to highlight each rating you
want. Then press the CURSOR
RING RIGHT to turn the rating ON
or OFF. Turning the rating ON will
block such programs from being seen.
FEATURES
AUTOLOCK
BLOCK CHANNEL
AUTOLOCK
MOVIE RATING
G
PG
PG-13
R
NC-17
G
PG
PG-13
R
NC-17
OFF
AV3
ALL
1
SETUP CODE
CLEAR ALL
MOVIE RATING
TV RATING
Press the STATUS/EXIT button
to remove the menu from the screen.
2
AUTOLOCK
MOVIE RATING
SMART HELP
G
PG
ON
AV3
ALL
1
When a rating is set to be
turned on (blocked), all higher
ratings will also be blocked auto-
matically. For example, if the R rat-
ing is turned on, the NC-17 and X
ratings also will be turned on.
PG-13
R
NC-17
2
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Features Menu • The AutoLock Control
BLOCKING BY TV RATING
ou also can block programs by
Yspecific TV ratings. Follow these
simple steps.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AUTOLOCK
PIP
CLOSED CAP
FEATURES
TIMER
BEGIN
TIME
AUTOLOCK
PIP
CLOSED CAP
START TIME
STOP TIME
CHANNEL
TUNER MODE
Press the MENU/SELECT but-
ton on the remote control to show
the on-screen menu.
Press the CURSOR RING
DOWN twice to highlight FEA-
TURES.
FEATURES
TIMER
AUTOLOCK
PIP
CLOSED CAP
POWER
ACCESS CODE
- - - -
Press the CURSOR RING
RIGHT. Then press the CURSOR
RING DOWN once to highlight the
AUTOLOCK control.
TV
VCR
PIP CH
ACC
SWAP
DN
URCE FREEZE
7
4
FEATURES
TIMER
AUTOLOCK
PIP
CLOSED CAP
PICTURE
SOUND
3
ACCESS CODE
- - - -
MENU/
STATUS/
EXIT
SELECT
Press the CURSOR RING
RIGHT again to highlight ACCESS
CODE.
M
FEATURES
TIMER
VOL
CH
1
ACCESS CODE
X X X X
AUTOLOCK
PIP
CLOSED CAP
Enter your four-digit ACCESS
CODE.
4
7
2
5
8
0
3
6
Press the CURSOR RING
DOWN repeatedly until TV RAT-
ING is highlighted.
9
TV/VCR
A/CH
SURF
FEATURES
AUTOLOCK
BLOCK CHANNEL
FEATURES
AUTOLOCK
POSITION
PIP
Press the CURSOR RING
RIGHT to enter the TV RATING
menu.
AV2
AV3
ALL
1
BLOCK CHANNEL
SETUP CODE
CLEAR ALL
MOVIE RATING
TV RATING
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
SETUP CODE
CLEAR ALL
MOVIE RATING
TV RATING
2
Press the CURSOR RING UP or
DOWN to select a rating.
Press the CURSOR RING
RIGHT or LEFT to turn the block
on the rating ON or OFF.
AUTOLOCK
TV RATING
AUTOLOCK
TV RATING
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
OFF
AV3
ALL
1
ON
AV3
ALL
1
NOTE: More specific subratings (for
violence, sexual content, dialogue, or
fantasy violence) are available for
TV-Y7, TV-PG, TV-14, and
TV-MA.
2
2
TV-Y (All Children)—designed to be appropriate for all children, especially ones ages 2–6. Programs rated TV-Y are
not expected to frighten younger children.
To access these subratings, press
10
TV-Y7 (Directed to Older Children)—designed for children ages 7 and older. Programs rated TV-Y7 may be more
appropriate for children who have acquired the development skills needed to distinguish between make-believe and real-
ity. Such programs may include mild fantasy and comic violence (FV).
the CURSOR RING RIGHT. Press
the CURSOR RING UP or DOWN
to select the subrating that you want to
block or unblock. Then press the
CURSOR RING RIGHT or LEFT
button to turn the block on the subrat-
ing ON or OFF.
TV-G (General Audience)—likely to be considered suitable for children of all ages. Such programs have little or no
violence, no strong language, and little or no sexual dialogue or sexual situations.
TV-PG (Parental Guidance Suggested)—contain material that parents may find unsuitable for younger children. This
type of programming has one or more of the following: moderate violence (V), some sexual situations (S), infrequent
coarse language (L), or some suggestive dialogue (D).
TV-14 (Parents Strongly Cautioned)—contain material that many parents will find unsuitable for children under 14
years of age. Such programs have one or more of the following: intense violence (V); intense sexual situations (S);
strong, coarse language (L); or intensely suggestive dialogue (D).
11
Press the STATUS/EXIT button
to remove the menu.
TV-MA (Mature Audience Only)—specifically designed to be viewed by adults and therefore may be unsuitable for
children under 17. Such programs have one or more of the following: graphic violence (V); explicit sexual situations
(S); or crude, indecent language (L).
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Features Menu • The AutoLock Control
TURNING THE BLOCKING CONTROL ON OR OFF
he BLOCKING control can be
Tthought of as the “master switch”
for AutoLock. Use it to turn on or off
all of the settings you have chosen to
block programming.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AUTOLOCK
PIP
CLOSED CAP
FEATURES
TIMER
AUTOLOCK
PIP
CLOSED CAP
TIME
BEGIN
START TIME
STOP TIME
CHANNEL
TUNER MODE
Press the MENU/SELECT but-
ton on the remote control to show the
on-screen menu.
FEATURES
TIMER
AUTOLOCK
PIP
CLOSED CAP
POWER
Press the CURSOR RING
DOWN twice to highlight FEA-
TURES.
ACCESS CODE
- - - -
TV
VCR
UP
ACC
Press the CURSOR RING
RIGHT button. Then press the
CURSOR RING DOWN once to
highlight the AUTOLOCK control.
SWAP
PIP CH
SOURCE FREEZE
7
DN
FEATURES
TIMER
4
PICTURE
SOUND
8
3
ACCESS CODE
- - - -
AUTOLOCK
PIP
CLOSED CAP
MENU/
STATUS/
EXIT
SELECT
Press the CURSOR RING
RIGHT again to highlight ACCESS
CODE.
M
9
VOL
CH
1
2
Enter your four-digit ACCESS
CODE.
3 2
4
7
3
6
FEATURES
TIMER
AUTOLOCK
PIP
CLOSED CAP
ACCESS CODE
X X X X
5
8
0
Press the CURSOR RING
DOWN repeatedly until BLOCK
OPTIONS is highlighted.
9
TV/VCR
5
A/CH
SURF
POSITION
PIP
Press the CURSOR RING
RIGHT to enter the BLOCK
OPTIONS menu. BLOCKING will
be highlighted.
FEATURES
AUTOLOCK
BLOCK CHANNEL
AV2
AV3
ALL
1
SETUP CODE
CLEAR ALL
MOVIE RATING
TV RATING
Press the CURSOR RING
RIGHT or LEFT to toggle BLOCK-
ING ON or OFF.
2
Press the STATUS/EXIT button
to remove the menu.
FEATURES
AUTOLOCK
SETUP CODE
BLOCKING
BLOCK UNRATED
NO RATING
CLEAR ALL
MOVIE RATING
TV RATING
BLOCK OPTIONS
AUTOLOCK
BLOCK OPTIONS
AUTOLOCK
BLOCK OPTIONS
BLOCKING
BLOCK UNRATED
NO RATING
BLOCKING
BLOCK UNRATED AV3
ON
OFF
AV3
ALL
1
NO RATING
ALL
1
2
2
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Features Menu • The AutoLock Control
BLOCKING UNRATED BROADCASTS
n addition to blocking rated pro-
Igrams or channels, you may also
choose to block all programming that
is unrated.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AUTOLOCK
PIP
CLOSED CAP
FEATURES
TIMER
AUTOLOCK
PIP
CLOSED CAP
TIME
BEGIN
START TIME
STOP TIME
CHANNEL
TUNER MODE
Press the MENU/SELECT but-
ton on the remote control to show
the on-screen menu.
FEATURES
TIMER
AUTOLOCK
PIP
CLOSED CAP
POWER
Press the CURSOR RING
DOWN twice to highlight FEA-
TURES.
ACCESS CODE
- - - -
TV
VCR
UP
ACC
Press the CURSOR RING
RIGHT. Then press the CURSOR
RING DOWN once to highlight the
AUTOLOCK control.
SWAP
PIP CH
SOURCE FREEZE
7
DN
4
FEATURES
TIMER
PICTURE
SOUND
3
ACCESS CODE
- - - -
AUTOLOCK
PIP
CLOSED CAP
MENU/
STATUS/
EXIT
SELECT
Press the CURSOR RING
RIGHT again to highlight ACCESS
CODE.
M
10
1
VOL
CH
2
Enter your four-digit ACCESS
CODE.
1
5
8
0
3
6
3
FEATURES
TIMER
AUTOLOCK
PIP
CLOSED CAP
6
ACCESS CODE
X X X X
4
8
Press the CURSOR RING
DOWN repeatedly until BLOCK
OPTIONS is highlighted.
7
TV/VCR
A/CH
9
5
SURF
POSITION
PIP
Press the CURSOR RING
RIGHT to enter the BLOCK
OPTIONS menu.
FEATURES
AUTOLOCK
BLOCK CHANNEL
AV2
AV3
ALL
1
Press the CURSOR RING
DOWN once to select BLOCK
UNRATED.
SETUP CODE
CLEAR ALL
MOVIE RATING
TV RATING
2
Press the CURSOR RING
RIGHT or LEFT to turn BLOCK
UNRATED ON or OFF.
FEATURES
AUTOLOCK
SETUP CODE
AUTOLOCK
BLOCK OPTIONS
AUTOLOCK
BLOCK OPTIONS
10
Press the STATUS/EXIT button
to remove the menu.
BLOCKING
BLOCK UNRATED
NO RATING
BLOCKING
BLOCK UNRATED
NO RATING
BLOCKING
BLOCK UNRATED
NO RATING
OFF
OFF
ON
ON
CLEAR ALL
MOVIE RATING
TV RATING
BLOCK OPTIONS
SMART HELP
Channel 12
Blocked by AutoLock
Unrated
Access Code
- - - -
When the BLOCK UNRATED control is turned
ON, attempts to view unrated programs will bring
a message like this to the screen. To watch the program,
enter your access code or go into the BLOCK OPTIONS
menu and turn the BLOCK UNRATED control OFF.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Features Menu • The AutoLock Control
BLOCKING BROADCASTS THAT HAVE NO RATING
ome programs contain no content
Sadvisories from the Motion
Picture Association of America or the
television broadcasters (see page 20
for more on content advisories and
ratings). To block such programs, fol-
low these steps.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AUTOLOCK
PIP
CLOSED CAP
FEATURES
TIMER
AUTOLOCK
PIP
CLOSED CAP
TIME
START TIME
STOP TIME
CHANNEL
TUNER MODE
BEGIN
Press the MENU/SELECT but-
ton on the remote control to show the
on-screen menu.
FEATURES
TIMER
AUTOLOCK
PIP
CLOSED CAP
POWER
ACCESS CODE
- - - -
Press the CURSOR RING
DOWN twice to highlight FEA-
TURES.
TV
VCR
PIP CH
ACC
SWAP
SOURCE FREEZE
7
DN
UP
4
FEATURES
TIMER
PICTURE
SOUND
9
3
Press the CURSOR RING
RIGHT. Then press the CURSOR
RING DOWN once to highlight the
AUTOLOCK control.
ACCESS CODE
- - - -
AUTOLOCK
PIP
CLOSED CAP
10
MENU/
SELECT
STATUS/
EXIT
M
VOL
CH
1
Press the CURSOR RING
RIGHT again to highlight the
ACCESS CODE input area.
4
7
2
5
8
0
3
6
FEATURES
TIMER
AUTOLOCK
PIP
CLOSED CAP
ACCESS CODE
X X X X
Enter your four-digit ACCESS
CODE.
9
TV/VCR
A/CH
SURF
Press the CURSOR RING
DOWN repeatedly until BLOCK
OPTIONS is highlighted.
POSITION
PIP
FEATURES
AUTOLOCK
BLOCK CHANNEL
Press the CURSOR RING
RIGHT to enter the BLOCK
OPTIONS menu.
AV2
AV3
ALL
1
SETUP CODE
CLEAR ALL
MOVIE RATING
TV RATING
Press the CURSOR RING
DOWN twice to highlight NO RAT-
ING.
2
Press the CURSOR RING
RIGHT or LEFT to turn NO RAT-
ING ON or OFF.
FEATURES
AUTOLOCK
SETUP CODE
AUTOLOCK
BLOCK OPTIONS
AUTOLOCK
BLOCK OPTIONS
BLOCKING
BLOCK UNRATED
NO RATING
BLOCKING
BLOCK UNRATED
NO RATING
BLOCKING
BLOCK UNRATED
NO RATING
OFF
OFF
OFF
ON
ON
ON
CLEAR ALL
MOVIE RATING
TV RATING
BLOCK OPTIONS
10
Press the STATUS/EXIT button
to remove the menu.
SMART HELP
Channel 12
Blocked by AutoLock
No rating
Access Code
- - - -
If the NO RATING control is turned on, all
programs having no content advisory information
will activate a screen like this. To watch the channel,
enter your access code or turn the NO RATING option
OFF.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Features Menu • The AutoLock Control
REVIEWING YOUR SETTINGS
ou can access a screen that
MOVIE RATING -
TV RATING -
-
-
R
NC17
X
Y7
-
PG
14
MA
Yshows your AutoLock settings.
Press the STATUS/EXIT but-
ton on your remote twice. Your
AutoLock settings will appear on
the screen.
BEGIN
BLOCK UNRATED ON
NO RATING OFF
NOTE: If you have blocked specific
subratings, such as V for Violence in
the TV-PG category, these blocked
subratings will not appear in the
review. Nonetheless, the subratings
are still blocked according to your
selections.
POWER
TV
SWAP
VCR
PIP CH
ACC
SOURCE FREEZE
DN
UP
PICTURE
SOUND
After a few seconds, the set-
tings will leave the screen auto-
matically, or you can press the
STATUS/EXIT button to remove
them from the screen.
2
1
MENU/
STATUS/
SELECT
EXIT
MUTE
VOL
CH
1
4
7
2
5
8
0
3
6
SMART HELP
9
The AutoLock review
screen will appear only if
TV/VCR
A/CH
SURF
you have turned ON the BLOCK-
ING control (see page 25).
POSITION
PIP
MOVIE RATING—shows all the movie ratings that you have chosen to block within the
MOVIE RATING control. NOTE: If a lower rating is blocked, higher ratings will also be
blocked automatically. For example, if you block R-rated programs, those that are rated X
will also be blocked.
MOVIE RATING -
TV RATING -
-
-
R
NC17
X
Y7
-
PG
14
MA
TV RATING—shows all the TV ratings that you have chosen to block within the TV RAT-
ING control. NOTE: If a lower rating is blocked, higher ratings will also be blocked auto-
matically. For example, if you block TV-PG-rated programs, those rated TV-14 and TV-MA
will also be blocked. The TV rating controls also have subratings for Violence (V), Fantasy
Violence (FV), Sexual Situations (S), Coarse Language (L), and Suggestive Language (D).
If you turn off a main rating but turn on a subrating of that main rating control, programs
having the subrating will be blocked; however, the main rating will not appear within the
AutoLock review menu because you did not turn it ON.
BLOCK UNRATED ON
NO RATING OFF
BLOCK UNRATED—shows whether you have turned this control ON or OFF.
BLOCK NO RATING—shows whether you have turned this control ON or OFF.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Features Menu • The AutoLock Control
CLEARING ALL BLOCKED CHANNELS
he CLEAR ALL control will
Tallow you to remove all channel
blocks that have been turned on
through the BLOCK CHANNEL
control. To clear all channel
blocks, follow the simple steps
below.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
BEGIN
AUTOLOCK
PIP
CLOSED CAP
FEATURES
TIMER
Press the MENU/SELECT but-
ton on the remote control to show
the on-screen menu.
TIME
AUTOLOCK
PIP
CLOSED CAP
START TIME
STOP TIME
CHANNEL
TUNER MODE
Press the CURSOR RING
DOWN twice to highlight FEA-
TURES.
FEATURES
TIMER
POWER
ACCESS CODE
- - - -
Press the CURSOR RING
RIGHT. Then press the CUR-
SOR RING DOWN once to high-
light the AUTOLOCK control.
AUTOLOCK
PIP
CLOSED CAP
TV
VCR
UP
ACC
SWAP
PIP CH
SOURCE FREEZE
7
DN
FEATURES
TIMER
4
Press the CURSOR RING
RIGHT again to highlight
ACCESS CODE.
PICTURE
SOUND
3
ACCESS CODE
- - - -
AUTOLOCK
PIP
CLOSED CAP
MENU/
STATUS/
EXIT
SELECT
Enter your four-digit ACCESS
CODE.
M
VOL
CH
1
Press the CURSOR RING
DOWN twice to highlight CLEAR
ALL.
1
4
7
2
5
8
0
3
6
FEATURES
TIMER
AUTOLOCK
PIP
CLOSED CAP
ACCESS CODE
X X X X
Press the CURSOR RING
RIGHT. The CLEAR ALL option
will display the word CLEARED.
All blocked channels will then be
viewable.
9
TV/VCR
5
A/CH
SURF
POSITION
PIP
Press the STATUS/EXIT but-
ton to remove the menu.
FEATURES
AUTOLOCK
BLOCK CHANNEL
AV2
AV3
ALL
1
SETUP CODE
CLEAR ALL
MOVIE RATING
TV RATING
2
SMART HELP
This control clears only
the blocks placed on channels
through use of the BLOCK
CHANNEL control and will not
turn off the MOVIE RATING, TV
RATING, BLOCK UNRATED, or
NO RATING control settings.
FEATURES
AUTOLOCK
BLOCK CHANNEL
FEATURES
AUTOLOCK
BLOCK CHANNEL
SETUP CODE
CLEAR ALL
MOVIE RATING
TV RATING
BLOCK OPTIONS
SETUP CODE
CLEAR ALL
MOVIE RATING
TV RATING
BLOCK OPTIONS
CLEARED
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Features Menu • The Closed Captioning Control
CC
USING THE CLOSED CAPTIONING CONTROL
losed Captioning (CC) allows
Cyou to read the voice content of
television programs on the TV screen.
Designed to help the hearing
impaired, this feature uses on-screen
text boxes to show dialogue and con-
versations while the TV program is in
progress.
SMART HELP
Not all TV programs and product commercials are broadcast with
Closed Captioning (CC). Nor are all Closed Captioning MODEs neces-
sarily being used by broadcast stations during a program offering Closed
Captioning. Refer to your area’s TV program listings for the stations and
times of shows being broadcast with Closed Captioning.
BEGIN
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AUTOLOCK
PIP
CLOSED CAP
Press the MENU/SELECT but-
ton on the remote control to show
the on-screen menu.
FEATURES
TIMER
TIME
AUTOLOCK
PIP
CLOSED CAP
START TIME
STOP TIME
CHANNEL
TUNER MODE
Press the CURSOR RING
DOWN twice to highlight FEA-
TURES.
FEATURES
TIMER
Press the CURSOR RING
RIGHT to enter the FEATURES
menu.
POWER
CAPTION MODE
CC DISPLAY
AUTOLOCK
PIP
CLOSED CAP
Press the CURSOR RING
DOWN repeatedly until the
CLOSED CAP control is highlighted.
TV
VCR
UP
ACC
SWAP
PIP CH
SOURCE FREEZE
FEATURES
CLOSED CAP
DN
5
PICTURE
CC1
CC2
CC3
SOUND
CAPTION MODE
CC DISPLAY
3
Press the CURSOR RING
RIGHT. The menu will shift to the
left and CAPTION MODE will be
highlighted. Then press the CUR-
SOR RING RIGHT again to high-
light the CAPTION MODEs area.
7
MENU/
STATUS/
SELECT
EXIT
FEATURES
CLOSED CAP
CAPTION MODE
CC DISPLAY
CC1
CC2
CC3
VOL
C
1
Press the CURSOR RING UP or
DOWN to select a CAPTION MODE.
6
2
5
8
0
3
6
4
CC1
CC2
CC3
CC4
Press the STATUS/EXIT button
to remove the menu from the screen.
7
9
NOTE: Select the
TV/VCR
CC MUTE option
and every time you
press the MUTE
button on your
A/CH
SURF
CC MUTE
TXT1
TXT2
TXT3
TXT4
REC •
SLEEP
CC
CLEAR
AV
INC.SUR PROG.LIST
remote control the
Closed Captioning
display will appear
on screen.
SMART HELP
CC DISPLAY—turns text
on or off if the TV station broad-
casting on the channel is making
Closed Captioning available.
Highlight CC DISPLAY and press the
CURSOR RING RIGHT to turn this
feature on or off.
CC MUTE—turns the Closed
Captioning mode on whenever the
MUTE button on the remote control is
pushed. Select CC MUTE in the on-
screen menu to turn this feature on.
Closed Captioning cannot be used on
the CVI (Component Video input)
source.
POSITION
PIP
TEXT Mode
Example Display -
The TV program is
CAPTION Mode
Example Display
blocked by the Text screen.
You can press the
CC button on the
remote control to
turn the Closed
Captioning display
on or off.
CLOSE CAPTION PROGRAMS ON WXYZ
ALL ITEMS ARE EASTERN STANDARD TIME (EST)
CHECK LOCAL LISTINGS
FOR TIMES IN YOUR AREA
6:00 TOP OF THE MORNING
10:00 THE BEST LITTLE CALL-IN SHOW EVER
12:00 NOONDAY NEWS
1:30 AS YOUR LIFE TURNS MY WORLD AROUND
6:00 WORLD NEWS FOR TODAY
9:00 PLAYHOUSE MOVIE OF THE WEEK
JOHN: Why did they move the
meeting up to this week?
MARSHA: I don't know, but they
are pushing to close the deal.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Menu • Treble, Bass, and Balance
ADJUSTING THE TREBLE, BASS, AND BALANCE
esides the normal volume level
Bcontrol, your TV also has individ-
ual sound-adjustment controls. You
can use TREBLE (high frequency),
BASS (low frequency), and Speaker
BALANCE to further adjust the sound
playback of TV programs.
BEGIN
Press the MENU/SELECT but-
ton on the remote control to show the
on-screen menu.
PICTURE
SOUND
FEATURES
INSTALL
TREBLE
BASS
BALANCE
AVL
INCR. SURROUND
SOUND
TREBLE
BASS
30
Press the CURSOR RING
DOWN once to highlight SOUND.
BALANCE
AVL
INCR. SURROUND
Press the CURSOR RING
RIGHT to enter the SOUND menu.
SOUND
POWER
TREBLE
BASS
BALANCE
AVL
INCR. SURROUND
Press the CURSOR RING
RIGHT or LEFT to adjust the TRE-
BLE level of the television’s sound.
30
After adjusting the TREBLE con-
trol, press the CURSOR RING
DOWN to select another sound
adjustment: BASS or BALANCE.
Then Press the CURSOR RING
RIGHT or LEFT to adjust the
selected control.
TV
VCR
UP
ACC
SWAP
PIP CH
SOURCE FREEZE
DN
SOUND
TREBLE
BASS
4
PICTURE
SOUND
3
5
BALANCE
AVL
INCR. SURROUND
0
6
MENU/
STATUS/
EXIT
SELECT
M
1
VOL
CH
Press the STATUS/EXIT button
to remove the menu from the screen.
2
52
5
8
0
1
4
7
3
6
9
TV/VCR
A/CH
SURF
SMART HELP
POSITION
PIP
Remember, when the bar
scale is centered, speaker
sound BALANCE is centered
between the TV’s left and right side
speakers.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Menu • AVL (Audio Volume Leveler)
USING THE AVL (AUDIO VOLUME LEVELER) CONTROL
ou may have noticed the peaks
Yand valleys of sound that occur
between program changes or at com-
mercial breaks. The volume levels
often vary considerably. By turning
ON the AVL (Audio Volume Leveler)
control, you can make your TV pro-
duce a more consistent volume level.
Follow these steps to turn the AVL
ON.
PICTURE
SOUND
FEATURES
INSTALL
TREBLE
BASS
BALANCE
AVL
INCR. SURROUND
BEGIN
SOUND
TREBLE
BASS
30
Press the MENU/SELECT but-
ton on the remote control to show the
on-screen menu.
BALANCE
AVL
INCR. SURROUND
Press the CURSOR RING
DOWN once to highlight SOUND.
SOUND
POWER
TREBLE
BASS
BALANCE
AVL
INCR. SURROUND
Press the CURSOR RING
RIGHT to enter the SOUND menu.
OFF
ON
Press the CURSOR RING
DOWN repeatedly until AVL is high-
lighted. Then press the CURSOR
RING RIGHT or LEFT to turn AVL
ON or OFF.
TV
VCR
UP
ACC
SWAP
PIP CH
SOURCE FREEZE
DN
OR
PICTURE
SOUND
3
AVL
MENU/
STATUS/
EXIT
SELECT
Press the STATUS/EXIT button
to remove the menu from the screen.
M
VOL
CH
42
5
8
0
1
4
7
3
6
9
TV/VCR
A/CH
SURF
POSITION
PIP
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Menu • Incredible Surround
USING INCREDIBLE SURROUND
he Incredible Surround feature
Twill boost the TV’s sound by mak-
ing it broader and fuller. Set the
INCREDIBLE SURROUND control to
INCREDIBLE SURROUND to
enhance stereo programs. Or set the
INCREDIBLE SURROUND control to
SPATIAL to give a “surround” effect
to mono programs.
PICTURE
SOUND
FEATURES
INSTALL
TREBLE
BASS
BALANCE
AVL
INCR. SURROUND
SOUND
TREBLE
BASS
30
BALANCE
AVL
INCR. SURROUND
BEGIN
SOUND
Press the MENU/SELECT but-
ton on the remote control to show the
on-screen menu.
POWER
TREBLE
BASS
BALANCE
AVL
INCR. SURROUND INCR. SURROUND
OFF
Press the CURSOR RING
DOWN once to highlight SOUND.
TV
VCR
UP
ACC
SWAP
PIP CH
SOURCE FREEZE
DN
OR
PICTURE
SOUND
3
Press the CURSOR RING
RIGHT to enter the SOUND menu.
INCR. SURROUND STEREO
MENU/
SELECT
STATUS/
EXIT
Press the CURSOR RING
DOWN repeatedly until INCR. SUR-
ROUND is highlighted. Then press
the CURSOR RING RIGHT or
LEFT to select SPATIAL or MONO
for a mono program, or INCR. SUR-
ROUND or STEREO for a stereo pro-
gram.
M
VOL
CH
42
5
8
0
1
4
7
3
6
9
TV/VCR
A/CH
SURF
INCR. SURROUND
SPATIAL
Press the STATUS/EXIT button
POSITION
PIP
to remove the menu from the screen.
OR
OR
POWER
STEREO
MONO
SMART HELP
TV
SWAP
VCR
PIP CH
ACC
SOURCE FREEZE
Press the INC. SUR button
on the remote to toggle
DN
UP
PICTURE
SOUND
between the same INCR. SUR-
ROUND control options discussed
above: SPATIAL or MONO and
INCR. SURROUND or STEREO.
The options available to you will
be determined by the program the
TV is on when you push the INC.
SUR button.
MENU/
STATUS/
SELECT
EXIT
MUTE
VOL
CH
1
4
7
2
5
8
0
3
6
9
TV/VCR
A/CH
SURF
REC •
SLEEP
CC
CLEAR
INC.SUR PROG.LIST
POSITION
PIP
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Menu • Stereo and SAP (Second Audio Program)
SETTING THE TV FOR STEREO AND SAP
STEREO MODE
PICTURE
SOUND
TREBLE
BASS
ou can enjoy stereo programs on
Yyour TV. It has both an amplifier
and twin speakers through which
stereo sound can be heard. Follow
these steps to select the STEREO
mode.
FEATURES
INSTALL
BALANCE
AVL
INCR. SURROUND
SOUND
TREBLE
BASS
30
BALANCE
AVL
INCR. SURROUND
BEGIN
SOUND
POWER
BASS
Press the MENU/SELECT but-
ton on the remote control to show the
on-screen menu.
BALANCE
AVL
INCR. SURROUND
STEREO
MONO
TV
VCR
PIP CH
ACC
Press the CURSOR RING
DOWN once to highlight the
SOUND menu.
SWAP
DN
SOURCE FREEZE
UP
OR
PICTURE
SOUND
3
STEREO
STEREO
Press the CURSOR RING
MENU/
SELECT
STATUS/
EXIT
RIGHT to enter the SOUND menu.
M
Press the CURSOR RING
DOWN repeatedly until the STEREO
control is highlighted.
1
VOL
CH
2
4 2
SMART HELP
1
4
7
3
Press the CURSOR RING
RIGHT or LEFT to select STEREO
or MONO. When STEREO has been
selected, the television will reproduce
any stereo signal it receives.
If stereo is not present on
a selected show and the TV is
placed in the STEREO mode, the
sound coming from the set will
remain MONO.
5
8
0
6
9
TV/VCR
A/CH
SURF
POSITION
PIP
Press the STATUS/EXIT button
to remove the menu from the screen.
SECOND AUDIO PROGRAM (SAP)
Second Audio Program, or SAP, is
Aan additional part of the stereo
broadcast system. Sent as a third audio
channel, an SAP can be heard apart
from the current TV program sound. TV
stations are free to use SAP for any
number of purposes, such as the broad-
cast of a second language or other
audio information.
SOUND
SOUND
BALANCE
AVL
BALANCE
AVL
INCR. SURROUND
STEREO
SAP
INCR. SURROUND
STEREO
SAP
ON
NOT AVAILABLE
If an SAP signal is not present with a
selected program, the SAP option can-
not be selected; NOT AVAILABLE will
appear on screen. Also, if SAP is select-
ed on a channel and you change to
another channel, when you return to the
original channel, SAP will be off. You
will have to reselect the SAP feature.
IF A SECOND AUDIO PROGRAM
IS BEING BROADCAST:
IF A SECOND AUDIO PROGRAM
IS NOT BEING BROADCAST:
SAP
ON
SAP
NOT AVAILABLE
OR
OR
SAP
OFF
SAP
OFF
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Menu • The Audio Out Control
SETTING THE AUDIO OUT CONTROL
f you have connected the TV’s
IAUDIO OUTPUT jacks to the
AUDIO INPUT jacks on a stereo
receiver, set AUDIO OUT to either
VARIABLE or FIXED to determine
whether you adjust the volume at the
at the TV or at the stereo. If you select
VARIABLE, change the volume at the
TV using the TV’s remote control. If
you select FIXED, adjust the volume
at the stereo using the stereo’s con-
trols. Follow these steps to make your
selection.
PICTURE
SOUND
FEATURES
INSTALL
TREBLE
BASS
BALANCE
AVL
INCR. SURROUND
SOUND
TREBLE
BASS
30
BEGIN
BALANCE
AVL
INCR. SURROUND
Press the MENU/SELECT but-
ton on the remote control to show the
on-screen menu.
SOUND
POWER
Press the CURSOR RING
DOWN once to highlight SOUND.
AVL
INCR. SURROUND
STEREO
SAP
Press the CURSOR RING
AUDIO OUT
FIXED
TV
VCR
UP
ACC
RIGHT to enter the SOUND menu.
SWAP
PIP CH
SOURCE FREEZE
DN
Press the CURSOR RING
DOWN repeatedly until AUDIO
OUT is highlighted.
OR
PICTURE
SOUND
5
3
6
MENU/
SELECT
STATUS/
EXIT
SOUND
AVL
Press the CURSOR RING LEFT
or RIGHT to set the AUDIO OUT to
VARIABLE or FIXED.
INCR. SURROUND
STEREO
SAP
M
1
VOL
CH
AUDIO OUT
VARIABLE
Press the STATUS/EXIT button
to remove the menu from the screen.
1
4
7
5
8
0
3
6
9
TV/VCR
A/CH
SURF
POSITION
PIP
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Menu • The TV Speaker Control and Audio Outputs
USING THE TV SPEAKER CONTROL AND AUDIO OUTPUTS
ould you like to hear TV pro-
Wgrams through your audio hi-
fi system? The TV’s Audio Outputs
and SPEAKERS ON/OFF control
work together to offer you this TV
sound option.
PICTURE
SOUND
FEATURES
INSTALL
TREBLE
BASS
BALANCE
AVL
INCR. SURROUND
SOUND
TREBLE
BASS
30
BEGIN
BALANCE
AVL
INCR. SURROUND
Use audio cables to connect
the R(ight) and L(eft) AUDIO
OUT(puts) on the TV to the
AUX/TV INPUTs on your amplifier
or sound system. Set the audio sys-
tem’s volume to a normal listening
level.
SOUND
POWER
INCR. SURROUND
STEREO
SAP
AUDIO OUT
SPEAKERS
ON
Turn the TV and audio system
ON. You can now adjust the sound
level coming from the audio system
with the VOL(ume) (+,–) buttons on
the TV or remote control.
TV
VCR
PIP CH
ACC
SWAP
DN
SOURCE FREEZE
UP
OR
PICTURE
SOUND
7
5
SPEAKERS
OFF
MENU/
STATUS/
EXIT
SELECT
Back of TV
To hear the TV sound from only the
audio system speakers:
3
M
VOL
CH
Ω
Press the MENU/SELECT
button on the remote control to
show the on-screen menu.
4
6 2
1
4
7
3
5
8
0
6
Press the CURSOR RING
DOWN once to highlight SOUND.
9
TV/VCR
A/CH
SURF
Press the CURSOR RING
RIGHT to enter the SOUND menu.
Ω
POSITION
PIP
1
Press the CURSOR RING
DOWN repeatedly until the
SPEAKERS control is highlighted.
Press the CURSOR RING
RIGHT or LEFT to turn the televi-
sion’s speakers ON or OFF. With
the SPEAKERS control set to OFF,
you should hear the TV sound com-
ing only from the audio system
speakers.
R
L
AUX/TV INPUT
PHONO INPUT
Press the STATUS/EXIT but-
ton to remove the menu from the
screen.
2
SMART HELP
The audio system may
have to be in AUX(iliary)
Audio System
mode to play sound from the TV.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Menu • The Bass Boost Control
USING THE BASS BOOST CONTROL
he BASS BOOST control allows
Tyou to increase the low-frequency
range of the TV’s sound. This creates
a deeper, fuller sound. Follow these
steps to turn BASS BOOST ON.
BEGIN
Press MENU/SELECT button on
the remote control to show the on-
screen menu.
PICTURE
SOUND
FEATURES
INSTALL
TREBLE
BASS
BALANCE
AVL
INCR. SURROUND
SOUND
TREBLE
BASS
30
Press the CURSOR RING
BALANCE
AVL
INCR. SURROUND
DOWN once to highlight SOUND.
Press the CURSOR RING
RIGHT to enter the SOUND menu.
SOUND
Press the CURSOR RING
DOWN repeatedly until BASS
BOOST is highlighted.
POWER
STEREO
SAP
AUDIO OUT
SPEAKERS
BASS BOOST
ON
Press the CURSOR RING
RIGHT or LEFT to turn BASS
BOOST ON or OFF.
TV
VCR
PIP CH
ACC
SWAP
DN
SOURCE FREEZE
UP
OR
5
PICTURE
SOUND
3
BASS BOOST
OFF
Press the STATUS/EXIT button
to remove the menu from the screen.
MENU/
SELECT
STATUS/
EXIT
1
M
VOL
CH
2
4 2
1
4
7
3
5
8
0
6
9
TV/VCR
A/CH
SURF
POSITION
PIP
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control • AutoPicture
USING AUTOPICTURE
hether you’re watching a movie
Wor playing a video game, your
TV has automatic video control set-
tings that will match with your current
program source or content.
AutoPicture quickly resets your TV’s
video controls for a number of differ-
ent types of programs and viewing
conditions that you may have in your
home. The Movies, Sports, Weak
Signal, and Multimedia AutoPicture
controls have been preset at the facto-
ry to automatically adjust the TV’s
brightness, color, picture, sharpness,
tint, and color temperature levels. The
Personal AutoPicture settings are the
ones that you made through the PIC-
TURE options within the on-screen
menu.
PERSONAL
BRIGHTNESS
COLOR
PICTURE
48
41
81
46
MOVIES
SHARPNESS
BRIGHTNESS
COLOR
PICTURE
40
31
20
16
SHARPNESS
POWER
SPORTS
BEGIN
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
62
31
62
16
Press the PICTURE button on
the remote control. The current
AutoPicture setting will appear in the
middle of the screen.
TV
VCR
UP
ACC
2
SWAP
PIP CH
SOURCE FREEZE
1
DN
PICTURE
SOUND
WEAK SIGNAL
Press the PICTURE button
repeatedly to select either PERSON-
AL, MOVIES, SPORTS, WEAK SIG-
NAL, or MULTIMEDIA picture set-
tings.
MENU/
STATUS/
SELECT
EXIT
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
37
35
15
15
MUTE
VOL
CH
1
4
7
2
5
8
0
3
6
MULTIMEDIA
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
40
31
20
26
9
TV/VCR
SMART HELP
A/CH
SURF
You determine the PER-
SONAL setting by adjustments
you make within the PICTURE
menu. The other AutoPicture set-
tings are made at the factory and
cannot be adjusted.
POSITION
PIP
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control • AutoSound
USING AUTOSOUND
utoSound allows you to select
Afrom three factory-set controls
and a personal control that you set
according to your own preferences
through the on-screen Sound menu.
The three factory-set controls (Voice,
Music, and Theatre) enable you to
tailor the TV sound so as to enhance
the particular program you are
watching. Follow these steps to select
any of the options.
PERSONAL
TREBLE
BASS
49
49
VOICE
TREBLE
BASS
56
47
BEGIN
Press the SOUND button on the
remote control. The current
POWER
AutoSound setting will appear in the
middle of the screen.
MUSIC
TREBLE
BASS
63
69
Press the SOUND button repeat-
edly to cycle through the four set-
tings: PERSONAL, VOICE, MUSIC,
or THEATRE.
TV
VCR
PIP CH
ACC
2
SWAP
SOURCE FREEZE
1
DN
UP
PICTURE
SOUND
MENU/
SELECT
STATUS/
EXIT
THEATRE
TREBLE
BASS
60
72
MUTE
SMART HELP
VOL
CH
You determine the PER-
SONAL setting by adjust-
ments you make within the SOUND
menu. The other AutoSound set-
tings are made at the factory and
cannot be adjusted.
1
4
7
2
5
8
0
3
6
9
TV/VCR
A/CH
SURF
AutoSoundworks only with the pro-
grams coming through the ANTEN-
NA/CABLE (ANT “A” or PIP
ANT “B”) inputs on the back of the
TV. AutoSound will not control the
sound levels of the other inputs on
the back of the TV set.
POSITION
PIP
AutoSound Choices
PERSONAL—presents the TV’s
sound according to the settings you
make within the SOUND menu.
VOICE—brings voices to the fore-
front and emphasizes them. Moves
music to the background.
MUSIC—emphasizes music over
voices.
THEATRE—provides a balance
between voices and music.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control • Surf, Alternate Channel, and Program List
USING SURF, ALTERNATE CHANNEL, AND PROGRAM LIST
SURF
SURF
12
ADD?
list of previously viewed channels
Acan be selected with the SURF
button on your remote control. With
SURF, you can easily switch between
different TV channels that currently
interest you. The SURF control allows
you to set up to ten channels in its
quick viewing list.
SURF
12
SMART
HELP
DELETE?
SURF LIST EMPTY
Along with the
broadcast channels, the
external video source
connections can be
added to the SURF list.
This means that the
AV 1, CVI, AV 2, and
AV 3 signal sources can
be added to your SURF
list. Just press the AV
button on your remote
to select the signal
source and then follow
steps 2Ð4 in the ÒSurfÓ
section on this page.
POWER
SURF
12
BEGIN
24
ADD?
Press the CH(annel) Scan (+,–)
buttons (or the NUMBER buttons) to
select a channel to add to the SURF
list.
TV
SWAP
VCR
PIP CH
ACC
SURF
SOURCE FREEZE
DN
UP
12
24
4
PICTURE
SOUND
DELETE?
3
Press the SURF button on the
remote control. The on-screen display
may read, “SURF LIST EMPTY.”
The number of the current channel
will be shown with ADD? to the right.
MENU/
SELECT
STATUS/
EXIT
1
MUTE
VOL
CH
SURF
While the SURF list message or
the SURF channel list appears on the
screen, press the CURSOR RING
RIGHT to add the present channel to
the SURF list.
12
24
32
1
4
7
2
5
8
0
3
6
ADD?
2
9
SURF
TV/VCR
A/CH
SURF
12
24
32
POSITION
PIP
If you want to delete the present
channel from the SURF list, press the
CURSOR RING RIGHT again.
DELETE?
Repeat steps 1 through 3 to add more
channels (up to 10) to the SURF list.
PROGRAM LIST
ress the Program List button on
Pyour remote to display a list of
channel numbers and their names (see
the “Tuner Mode” “Auto Program,”
“Channel Edit,” and “Name” sections
in the Setup and Quick Use Guide that
came with your TV for proper setup).
You can also access the Program List
by pressing the button in the center of
the Cursor Ring. Each channel will
appear as a selectable menu item. The
current channel will be highlighted by
default. Only five channels will be
shown on screen at one time. Press the
top or bottom part of the Cursor Ring
to scroll the list and and highlight a
channel. Press the right side of the
Cursor Ring to tune to the highlighted
channel. Channels marked “Skipped”
in the “Channel Edit” control will not
appear in the list. Any channel that is
being blocked by AutoLock will appear
with a padlock icon to indicate that the
channel is not viewable.
4
7
5
8
0
6
9
TV/VCR
A/CH
SURF
PROGRAM LI ST
71
72
98
- - - - -
- - - - -
- - - - -
REC •
LEAR
CC
SLE
E
P
C
AV
INC.SUR PROG.LIST
ALTERNATE CHANNEL (A/CH)
AV 1 - - - - -
CVI - - - - -
PIP
our remote also has an A/CH
Y(Alternate Channel) button.
Pressing this button will toggle
between the current channel and one
previous channel.
4
7
5
8
0
6
9
5
TV/VCR
TUNER-A
A/CH
SURF
22
TUNER-A
REC
LEAR
C
AV
INC.SUR
POSITIO
N
PIP
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control • The Sleep Timer Control
USING THE SLEEP TIMER CONTROL
ave you ever fallen asleep in
Hfront of the TV, only to be awak-
ened in the middle of the night by the
screeching sound that accompanies
the on-screen test pattern of a station
that’s signed off? Your TV can enable
you to avoid that discomfort by auto-
matically turning itself off. You choose
the amount of time before the set turns
off.
SLEEP OFF
SLEEP 15
SLEEP 30
BEGIN
POWER
Press the SLEEP button on the
remote control. The SLEEP Timer on-
screen display will appear in the
upper part of the screen.
TV
SWAP
VCR
ACC
PIP CH
SOURCE FREEZE
Within five seconds, press the
SLEEP button repeatedly to pick the
amount of time before the TV will
turn itself off.
DN
UP
PICTURE
SOUND
SLEEP 45
SLEEP 60
MENU/
SELECT
STATUS/
EXIT
An on-screen countdown will appear
during the last minute before the TV
turns off.
MUTE
VOL
CH
1
4
7
2
5
8
0
3
6
9
SMART HELP
TV/VCR
2
SURF
1
To see how many minutes
remain before the TV shuts
itself off, press the STATUS/EXIT
button.
REC
SLEEP
SLEEP 90
CLEAR
AV
INC.SUR PROG.LIST
POSITION
PIP
SLEEP 120
SLEEP 180
SLEEP 240
During the last minute of a
Sleep Timer setting, an on-
screen countdown will be
displayed.
During the last 10 seconds
of a Sleep Timer setting, the
on-screen display will read
“GOOD BYE.”
50 SEC
GOOD BYE
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control • The Volume Buttons
USING THE VOLUME BUTTONS
ress the VOL(ume) (+, –) buttons
Pon the remote and the volume
adjustment bar will appear on screen
and move to illustrate the adjustments
you make.
BEGIN
Press the VOL(ume) (+,–) but-
tons on the remote control to show
the VOLUME bar display on the
screen.
Press the VOL(ume) (+,–) but-
tons to adjust the TV’s sound level.
VOLUME
15
POWER
TV
VCR
UP
ACC
SWAP
PIP CH
SOURCE FREEZE
DN
PICTURE
SOUND
MENU/
SELECT
2
STATUS/
EXIT
1
MUTE
VOL
CH
1
4
7
2
5
8
0
3
6
9
TV/VCR
A/CH
SURF
POSITION
PIP
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control • The AV Button
USING THE AV BUTTON
he AV button on your remote con-
Ttrol allows you to choose from
among the signal sources you have
connected to your TV. The possibili-
ties are TUNER-A (the ANT[enna]
“A” input), TUNER-B (the PIP
ANT[enna] “B” input), AV 1, CVI,
AV 2, and AV 3 (your TV’s side
inputs).
AV 3
AV 2
CV1
BEGIN
Press the AV button on the
remote control to choose a signal
source for viewing.
AV 1
2
TUNER-B
10
TUNER-A
POWER
TV
SWAP
VCR
PIP CH
ACC
SOURCE FREEZE
DN
UP
PICTURE
SOUND
MENU/
SELECT
STATUS/
EXIT
MUTE
VOL
CH
1
4
7
2
5
8
0
3
6
9
TV/VCR
A/CH
SURF
REC •
SLEEP
1
CC
CLEAR
AV
INC.SUR PROG.LIST
POSITION
PIP
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control • Working Accessory Devices
SETTING THE TV REMOTE TO WORK ACCESSORY DEVICES
our TV remote is capable of work-
Ying not only your TV but also
infrared remote (IR) controlled
devices such as VCRs, cable TV con-
verter boxes, satellite receivers, DVD
players, and laser disc players.
If you want to use your TV remote to
operate a VCR or other accessory
device, you will need to perform this
initial check explained in this sec-
tion. You may also need to go to the
sections on the “Direct Access
TV Remote
VCR/Accessory
Mode Buttons
Method” and the “Search Method”
in the pages that follow.
BEGIN
TV
SWAP
VCR
PIP CH
ACC
Press the VCR or ACC(essory)
mode button on the TV remote for
the desired accessory device category.
SOFREEZE
DN
UP
SOUND
NOTE: pressing the ACC(essory)
mode button allows access to the
product codes for cable TV convert-
ers, DVD players, satellite receivers,
and laser disc players.
1
VCR
2
P
Point the TV remote toward the
desired accessory device and press the
POWER button.
AC
C
Satellite
Receiver
FREE
VC
R
SOURC
E
TV
PIP
C
H
PICTURE
UP
D
SWAP
MENU/
SELE
CT
SOUND
Does the remote turn the accessory
device on?
STATUS/
XIT
E
C
H
MUTE
Cable Converter
3
3
VOL
2
6
6
1
5
9
9
4
8
SURF
If yes,
and try other function but-
7
0
TV/VCR
PIP
A/C
H
A
tons on the TV remote. If they also
work the accessory device, then the
remote is ready and no further steps
are needed.
POSITION
If no, do the following:
Look up a three-digit remote code
number on page 47 or 48 for your
brand of accessory device. Then go
through the simple Direct Access
Method steps shown on page 45.
SMART HELP
If more than one number is
listed, you may have to try
more than the first three-digit code
given to locate your device’s correct
code.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control • Working Accessory Devices
SETTING THE TV REMOTE TO WORK ACCESSORY DEVICES
DIRECT ACCESS METHOD
POWER
ow that you have looked up the
Nthree-digit Remote Control Direct
Entry Code for your brand of acces-
sory device, you are ready to follow
the simple steps shown below.
1
Satellite
Receiver
TV
SWAP
VCR
PIP CH
ACC
SOURCE FREEZE
Cable TV
Converter
Please read through all the steps
before beginning.
DN
UP
PICTURE
SOUND
BEGIN
DVD
VCR
MENU/
SELECT
STATUS/
EXIT
First, press and hold down the
VCR or ACC (for an accessory
device other than a VCR) mode
button on the TV remote. Then press
and hold down the MENU/SELECT
button at the same time for a brief
moment. Release the buttons. The TV
remote back light will switch on.
MUTE
VOL
CH
1
1
4
7
2
5
8
0
3
6
3
Within 30 seconds of pressing
the VCR (or ACC) button and
MENU/SELECT button, enter a
three-digit code for the accessory
device (see pages 47 and 48).
POWE
R
9
TV/VCR
TV
V
C
R
A/CH
SURF
A
C
C
SWAP
PIP
C
H
SOURC
E
FRE ZE
E
D
N
U
U
SOUND
PICTURE
2
STATUS/
XIT
POSITION
PIP
E
MENU/
SELE
C
T
MUTE
VOL
C
H
Point the remote at the accessory
device. Then press the POWER but-
ton on the remote to turn the device
on.
1
3
2
3
4
6
6
5
7
9
9
8
TV/VC
R
A/C
H
A
0
S
U
R
F
C
POSITIO
N
PIP
SMART HELP
NOTES:
•
Pressing the ACC(esso-
• If you do not enter a complete code
within 30 seconds, you will need to
perform step 1 of the Direct Access
Method again.
ry) mode button allows access
to the product codes for accessory
devices.
• If the procedure explained above
does not work the first time,
repeat the steps using the same
remote code number.
• If you enter more than three digits,
the unit will retain the first three
digits entered.
• If after a second try the remote
does not operate your accessory
device, and more code numbers
are listed for your brand, use the
next listed code number.
• If after repeated attempts the
Direct Access Method does not
allow you to work your accessory
device with your TV remote, try
the Search Method explained on
the next page.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control • Working Accessory Devices
SETTING THE TV REMOTE TO WORK ACCESSORY DEVICES
SEARCH METHOD
Satellite Receiver
our TV remote can be set to work
Yvarious accessory devices (VCRs,
cable converters, and satellite
06
0708
Cable TV Converter
VCR
06
receivers, for example) by what is
called the Search Method.
0708
09
1
09
NOTE: The Search Method works
only with devices equipped with
Channel Display Indicators or that
capability. If the Direct Access code
number method (shown in the previ-
ous section) did not enable your TV
remote to work your accessory device,
then follow the easy steps listed below.
Please read the steps once before per-
forming them.
06
078
09
3
POWER
BEGIN
TV
SWAP
VCR
PIP CH
ACC
Turn on the desired device. Press
and hold down the VCR or ACC
(for an accessory device other than
a VCR) mode button on the TV
remote. Then press and hold down the
SURF button as you hold down the
desired mode (VCR or ACC) button.
SOUEEZE
DN
UP
P
SOUND
2
4
MENU/
SELECT
STATUS/
EXIT
NOTE: The remote’s
back light will blink
as the remote moves
through its product
code list. After the
remote identifies the
product code for your
accessory device and
you release the remote
buttons, the back light
will blink twice.
MUTE
VOL
CH
NOTE: You must press and hold
down the desired mode (VCR or
ACC) button first and then press and
hold down the SURF button second.
1
4
7
2
5
8
0
3
6
9
TV/VCR
A/CH
SURF
While holding down the SURF
and the desired mode (VCR or
ACC) buttons at the same time,
point the remote toward the accesso-
ry device and continue holding the
buttons down.
POSITION
PIP
2
4
Watch the Channel Indicator on
your accessory device. Channel num-
bers will scan up when the TV remote
has identified the correct code for
your accessory device. This may take
several minutes.
SMART HELP
Your TV remote may
locate the accessory device’s
code quickly or require several
minutes to do so.
• Don’t let the accessory device scan
up more than five channels when
the correct code is found—the
remote may pass up the right code
and have to repeat the search
cycle.
• If no channel change happens after
several minutes, repeat steps 1–4.
Then if a channel change still does
not occur, the remote will not
work the desired accessory device.
•
Release the mode (VCR or ACC)
and SURF buttons as soon as chan-
nel numbers start to scan up. The
scanning means that your TV remote
has found the code for your accessory
device.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control • Working Accessory Devices
SETTING THE TV REMOTE TO WORK ACCESSORIES
Remote Control Direct Entry Codes
MGN Technology . . . . . . . . . . . . . . . . . . . . .267 Shintom . . . . . . . . . . . . . . . . . . . . . . . . . . . .099
MTC . . . . . . . . . . . . . . . . . . . . . . . . . . .027, 267 Shogun . . . . . . . . . . . . . . . . . . . . . . . . .078, 267
Magnasonic . . . . . . . . . . . . . . . . . . . . . . . . . .305 Singer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .099
Magnavox . . . .062, 108, 137, 130, 027, 066, 176 Sony . . . . . . . .060, 061, 059, 280, 027, 038, 062
Magnin . . . . . . . . . . . . . . . . . . . . . . . . . . . . .267 Sunpak . . . . . . . . . . . . . . . . . . . . . . . . . . . . .280
Marantz . . . . . . . . . . . . . . . . . . . . . . . . .108, 062 Sylvania . . . . . . . . .062, 108, 027, 070, 130, 137
Marta . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .064 Symphonic . . . . . . . . . . . . . . . . . . . . . . . . . .027
Matsushita . . . . . . . . . . . . . . . . . . .062, 189, 481 TMK . . . . . . . . . . . . . . . . . . . . . . .063, 235, 267
Memorex .131, 074, 506, 027, 064, 075, 062, 073, Tatung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .068
. . . . . . . .267, 334, 066, 189, 236, 481, 828, 829 Teac . . . . . . . . . . . . . . . . . . . . . . . . . . .027, 068
Minolta . . . . . . . . . . . . . . . . . . . . . . . . .132, 069 Technics . . . . . . . . . . . . . . . . . . . .062, 189, 273
Mitsubishi . . .070, 200, 088, 102, 241, 269, 075, Teknika . . . . . . . . . . . . . . . . .027, 062, 064, 079
VCR BRAND AND REMOTE CODE(S)
Admiral . . . . . . . . . . . . . . . . . . . . . . . . .075, 236
Adventura . . . . . . . . . . . . . . . . . . . . . . . . . . .027
Aiko . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .305
Aiwa . . . . . . . . . . . . . . . . . . .334, 495, 027, 064
Akai . . . . . . . .133, 080, 068, 076, 088, 183, 269
America Action . . . . . . . . . . . . . . . . . . . . . . .305
American High . . . . . . . . . . . . . . . . . . . . . . .062
Asha . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .267
Audiovox . . . . . . . . . . . . . . . . . . . . . . . . . . .064
Beaumark . . . . . . . . . . . . . . . . . . . . . . . . . . .267
Bell & Howell . . . . . . . . . . . . . . . . . . . . . . . .131
Broksonic . . . . . . . . . . . . . . .148, 211, 029, 236,
. . . . . . . . . . . . . . . . . . . . . . .238, 322, 388, 506
CCE . . . . . . . . . . . . . . . . . . . . . . . . . . .099, 305
Calix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .064
Canon . . . . . . . . . . . . . . . . . . . . . .194, 062, 129
Capehart . . . . . . . . . . . . . . . . . . . . . . . . . . . .047
Carver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
Cineral . . . . . . . . . . . . . . . . . . . . . . . . . . . . .305
Citizen . . . . . . . . . . . . . . . . . . . . . . . . .305, 064
Colt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .099
Craig . . . . . . . . . . . . . . .064, 099, 074, 267, 298
Curtis Mathes . . . . . . . . . . . .062, 068, 087, 189
Cybernex . . . . . . . . . . . . . . . . . . . . . . . .078, 267
Daewoo . . . . . . . . . . . . . . . . .305, 588, 047, 072
Daytron . . . . . . . . . . . . . . . . . . . . . . . . . . . . .047
Denon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .069
Dynatech . . . . . . . . . . . . . . . . . . . . . . . . . . . .027
Electrohome . . . . . . . . . . . . . . . . . . . . . . . . .064
Electrophonic . . . . . . . . . . . . . . . . . . . . . . . .064
Emerex . . . . . . . . . . . . . . . . . . . . . . . . . . . . .059
Emerson . . . . .211, 029, 236, 305, 063, 148, 238,
. . . . . . . . . . .588, 235, 321, 506, 088, 115, 239,
. . . . . . . . . . . .027, 064, 070, 095, 322, 388, 537
Fisher . . . . . . . . . . . . . . . . . .074, 131, 081, 093
Fuji . . . . . . . . . . . . . . . . . . . . . . . . . . . .060, 062
Funai . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .027
GE . . . . . . . . . . . . .062, 087, 075, 092, 229, 267
Garrard . . . . . . . . . . . . . . . . . . . . . . . . . . . . .027
Go Video . . . . . . . . . . . . . . . .306, 459, 553, 259
GoldStar . . . . . . . . . . . . .064, 045, 065, 498, 507
Gradiente . . . . . . . . . . . . . . . . . . . .035, 027, 435
Grundig . . . . . . . . . . . . . . . . . . . . . . . . . . . .222
HI-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .074
Harley Davidson . . . . . . . . . . . . . . . . . . . . . .027
Harman/Kardon . . . . . . . . . . . . . . .065, 102, 108
Harwood . . . . . . . . . . . . . . . . . . . . . . . .095, 099
Headquarter . . . . . . . . . . . . . . . . . . . . . . . . .073
Hitachi . . . . . .069, 193, 132, 092, 027, 068, 109
Hughes Network Systems . . . . . . . . . . . . . . .069
JVC . . . . . . . . . . . .094, 035, 233, 234, 068, 411
Jensen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .068
KEC . . . . . . . . . . . . . . . . . . . . . . . . . . .064, 305
KLH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .099
Kenwood . . . . . . . . . . . . . . . .068, 094, 411, 065
Kodak . . . . . . . . . . . . . . . . . . . . . . . . . .062, 064
LXI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .064
Lloyd's . . . . . . . . . . . . . . . . . . . . . . . . .027, 235
Logik . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .099
MEI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .062
MGA . . . . . . . . . . . . . . . . . . . . . . .070, 088, 267
094, 470
Thomas . . . . . . . . . . . . . . . . . . . . . . . . . . . . .027
Motorola . . . . . . . . . . . . . . . . . . . . . . . .062, 075 Toshiba . . . . . . . . . .072, 237, 239, 070, 093, 393
Multitech . . . . . . . . . . . . . . . . . . . . . . . .027, 099 Totevision . . . . . . . . . . . . . . . . . . . . . . .064, 267
NAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .085 Unitech . . . . . . . . . . . . . . . . . . . . . . . . . . . . .267
NEC . . . . . . . .065, 067, 068, 077, 094, 109, 131 Vector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .072
Nikko . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .064 Vector Research . . . . . . . . . . . . . . . . . .065, 067
Nikon . . . . . . . . . . . . . . . . . . . . . . . . . .061, 280 Video Concepts . . . . . . . . . . .067, 072, 088, 248
Noblex . . . . . . . . . . . . . . . . . . . . . . . . . . . . .267 Videosonic . . . . . . . . . . . . . . . . . . . . . . . . . .267
Olympus . . . . . . . . . . . . . . . . . . . . . . . .062, 253 Wards . . . . . . . . . .062, 087, 089, 027, 074, 239,
Optimus . . . . . . . . . . . .189, 481, 075, 085, 064,
. . . . . . . . . . . . . . . .267, 069, 075, 099, 108, 176
. . . . . . . . . . . . . . . . . . .131, 459, 827, 828, 829 White Westinghouse . . . . . . . . . . .099, 305, 236
Optonica . . . . . . . . . . . . . . . . . . . . . . . . . . . .089 XR-1000 . . . . . . . . . . . . . . . . . . . .099, 027, 062
Orion . . . . . . . . . . . . . . .506, 029, 211, 236, 322 Yamaha . . . . . . . . . . . . . . . . . . . . . . . . . . . . .065
Panasonic . . . . . . .062, 189, 481, 253, 104, 405,
. . . . . . . . . . . .129, 252, 254, 273, 827, 828, 829
Penney . . . . . .062, 267, 064, 069, 065, 067, 081
Pentax . . . . . . . . . . . . . . . . . . . . . .069, 092, 132
Philco . . . . . . . . . . . . . . . . . . . . . .062, 236, 506
Philips . . . . . . . . . .108, 062, 089, 137, 830, 831
Pilot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .064
Pioneer . . . . . . . . . . . . . . . . . . . . .085, 195, 094
Polk Audio . . . . . . . . . . . . . . . . . . . . . . . . . .108
Portland . . . . . . . . . . . . . . . . . . . . . . . . . . . .047
Profitronic . . . . . . . . . . . . . . . . . . . . . . . . . . .267
Proscan . . . . . . . . . . . . . . . . . . . . . . . . .087, 229
Protec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .099
Pulsar . . . . . . . . . . . . . . . . . . . . . . . . . .066, 078
Quarter . . . . . . . . . . . . . . . . . . . . . . . . . . . . .073
Quartz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .073
Quasar . . . . . . . . . . . . . .062, 189, 104, 481, 828
RCA . . . . . . . . . . .087, 176, 229, 069, 132, 062,
. . . . . . . . . . . . . . . .075, 092,104, 133, 267, 304
Radio Shack . . . . . . . . . . . . . . . . . . . . . . . . .027
Radix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .064
Randex . . . . . . . . . . . . . . . . . . . . . . . . . . . . .064
Realistic . . . . . . . . . . . . . . . .027, 131, 074, 075,
. . . . . . . . . . . . . . . . . . . .064, 062, 089, 073, 93
Ricoh . . . . . . . . . . . . . . . . . . . . . . . . . .061, 280
Runco . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .066
STS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .069
Salora . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
Samsung . . . . . . . . . . . . . . . .072, 078, 080, 267
Sanky . . . . . . . . . . . . . . . . . . . . . . . . . .066, 075
Sansui . . . . . . .068, 506, 027, 094, 109, 236, 298
Sanyo . . . . . . . . . . . . . . . . . .074, 073, 131, 267
Scott . . . . . . . .211, 238, 148, 070, 072, 237, 239
Sears . . . . . . . . . . . . . . .081, 132, 064, 069, 027,
. . . . . . . . . . . . . . . . . . .062, 073, 074, 093, 131
Semp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .072
Sharp . . . . . . . . . . . . . . . . . . . . . . . . . . .075, 089
Zenith . . . . . . . . . . .066, 027, 060, 061, 236, 506
CABLE CONVERTER BRAND AND
REMOTE CODE(S)
ABC . . . . . . . . . . . . . . . . . . .030, 028, 034, 035,
. . . . . . . . . . . . . . . . . . .038, 040, 041, 044, 060
Allegro . . . . . . . . . . . . . . . . . . . . . . . . .180, 342
Antronix . . . . . . . . . . . . . . . . . . . . . . . .049, 234
Archer . . . . . . . . . . . . . .049, 066, 180, 234, 824
BBT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .294
Belcor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .083
Bell & Howell . . . . . . . . . . . . . . . . . . . . . . . .041
Cable Star . . . . . . . . . . . . . . . . . . . . . . . . . . .083
Cabletenna . . . . . . . . . . . . . . . . . . . . . . . . . .049
Cableview . . . . . . . . . . . . . . . . . . . . . . . . . . .049
Century . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180
Citizen . . . . . . . . . . . . . . . . . . . . . . . . .180, 342
Colour Voice . . . . . . . . . . . . . . . . . . . . .052, 058
Comband . . . . . . . . . . . . . . . . . . . . . . . . . . .259
Comtronics . . . . . . . . . . . . . . . . . . . . . .067, 087
Contec . . . . . . . . . . . . . . . . . . . . . . . . . . . . .046
Digi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .664
Eastern . . . . . . . . . . . . . . . . . . . . . . . . . . . . .029
Emerson . . . . . . . . . . . . . . . . . . . . . . . . . . . .824
Everquest . . . . . . . . . . . . . . . . . . . . . . .042, 067
Focus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .427
GC Electronics . . . . . . . . . . . . . . . . . . .083, 234
GE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .259
Garrard . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180
Gemini . . . . . . . . . . . . . . . . .042, 097, 269, 824
General Instrument . . . . . . . .303, 503, 038, 837
GoldStar . . . . . . . . . . . . . . . . . . . . . . . .067, 171
Goodmind . . . . . . . . . . . . . . . . . . . . . . . . . .824
Hamlin . . . . . . . . . . . . .047, 036, 286, 061, 300
Hitachi . . . . . . . . . . . . . . . . . . . . . . . . . . . . .038
Hytex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .034
Jasco . . . . . . . . . . . . . . . . . . . . . . .042, 180, 342
See the next page for more codes.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control • Working Accessory Devices
SETTING THE TV REMOTE TO WORK ACCESSORY DEVICES
Remote Control Direct Entry Codes
Amway . . . . . . . . . . . . . . . . . . . . . . . . . 070, 102
Mitsubishi . . . . . . . . . . . . . . . . . . . . . . . . . .861
Onkyo . . . . . . . . . . . . . . . . . . . . . . . . . . . . .860
Optimus . . . . . . . . . . . . . . . . . . . . . . . . . . . .869
Panasonic . . . . . . . . . . . . . . . . . . . . . . . . . . .859
Philips . . . . . . . . . . . . . . . . . . . . . . . . .866, 860
Pioneer . . . . . . . . . . . . . . . . . . . . . . . . .869, 863
Proscan . . . . . . . . . . . . . . . . . . . . . . . . . . . . .862
RCA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .862
Samsung . . . . . . . . . . . . . . . . . . . . . . . . . . . .870
Sony . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .864
Technics . . . . . . . . . . . . . . . . . . . . . . . . . . . .859
Theta Digital . . . . . . . . . . . . . . . . . . . . . . . .869
Toshiba . . . . . . . . . . . . . . . . . . . . . . . . . . . . .860
Yamaha . . . . . . . . . . . . . . . . . . . . . . . . .859, 867
Zenith . . . . . . . . . . . . . . . . . . . . . . . . . .872, 860
CABLE CONVERTER BRAND AND
REMOTE CODE(S)
Arunta . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 548
Astro Industries . . . . . . . . . . . . . . . . . . . . . . 122
BMC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
BSR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Cable Innovations. . . . . . . . . . . . . . . . . . . . . 581
Capetronic . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Century. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 565
Channel Master. . . . . . . . . . . . . . . . . . . 045, 239
Chaparral . . . . . . . . . . . . . . . . . . . 080, 236, 243
Citoh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
Conifer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 031
Curtis Mathes . . . . . . . . . . . . . . . . . . . . 088, 099
DX Antenna . . . . . . . . . . . . . . . . . . . . . . . . . 068
Drake . . . . . . . . . . . . . . . . . . 091, 272, 045, 176
Echostar. . . . . . . . . . . . . 307, 802, 175, 186, 296
Expressvu. . . . . . . . . . . . . . . . . . . . . . . . . . . 802
General Instrument . . . . 388, 896, 574, 581, 654
Gould . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 082
HNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 644
HTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 802
Hitachi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 846
Homecable . . . . . . . . . . . . . . . . . . . . . . . . . . 265
Hughes Network Systems . . . . . . . . . . . . . . . 776
Hytek . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
IQ. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237
IQ Prism. . . . . . . . . . . . . . . . . . . . . . . . . . . . 237
Intersat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 070
JVC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 802
Janeil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
Jerrold. . . . . . . . . . . . . . . . . . . . . . . . . . 388, 654
Legend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296
Macom . . . . . . . . . . . . . . . . . . . . . . . . . 088, 045
Magnavox. . . . . . . . . . . . . . . . . . . . . . . 749, 751
Memorex . . . . . . . . . . . . . . . . . . . . . . . 296, 751
Next Level . . . . . . . . . . . . . . . . . . . . . . . . . . 896
Norsat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 031
Panasonic . . . . . . . . . . . . . . . . . . . . . . . 179, 728
Philips. . . . . . . . . . . . . . . . . . . . . . 227, 749, 751
Pico . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Primestar. . . . . . . . . . . . . . . . . . . . . . . . 654, 388
RCA . . . . . . . . . . . . . . . . . . . . . . . 593, 170, 882
Radio Shack . . . . . . . . . . . . . . . . . . . . . 581, 896
Ramsey. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Realistic . . . . . . . . . . . . . . . . . . . . . . . . 079, 078
STS. . . . . . . . . . . . . . . . . . . . . . . . . . . . 237, 068
Sony . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 666
Star Choice. . . . . . . . . . . . . . . . . . . . . . . . . . 896
Star Trak . . . . . . . . . . . . . . . . . . . . 207, 448, 574
Strong. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 448
Toshiba . . . . . . . . . . . . . . . . . 109, 776, 817, 088
Town & Country. . . . . . . . . . . . . . . . . . . . . . 574
Uniden . . . . . . . . . . . . . . . . . 265, 079, 101, 397,
. . . . . . . . . . . . . . . . . . . 581, 751, 103, 323, 749
Zenith . . . . . . . . . . . . . . . . . . . . . . 091, 883, 088
Jerrold . . . . . . . . . . . . . . . . .030, 039, 303, 041,
. . . . . . . . . . . . . . . . . . .503, 038, 051, 042, 837
Linsay . . . . . . . . . . . . . . . . . . . . . . . . . . . . .467
Macom . . . . . . . . . . . . . . . . . . . . . . . . . . . . .060
Magnavox . . . . . . . . . . . . . . . . . . . . . . . . . .054
Memorex . . . . . . . . . . . . . . . . . . . . . . . . . . .027
Movie Time . . . . . . . . . . . . . . . . . . . . .090, 183
NSC . . . . . . . . . . . . . . . . . . . . . . .183, 090, 097
Novaplex . . . . . . . . . . . . . . . . . . . . . . . . . . .645
Oak . . . . . . . . . . . . . . . . . . . . . . . . . . . .046, 034
Optimus . . . . . . . . . . . . . . . . . . . . . . . . . . . .048
Panasonic . . . . . . . . . . . . . . . . . . .048, 134, 027
Panther . . . . . . . . . . . . . . . . . . . . . . . . . . . . .664
Paragon . . . . . . . . . . . . . . . . . . . . . . . . . . . .027
Philips . . . . . . . . . .052, 058, 269, 317, 054, 180
Pioneer . . . . . . . . . . . . . . . . . . . . .171, 050, 560
Popular Mechanics . . . . . . . . . . . . . . . . . . . .427
Prelude . . . . . . . . . . . . . . . . . . . . . . . . . . . . .797
Pulsar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .027
Quasar . . . . . . . . . . . . . . . . . . . . . . . . . . . . .027
RCA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .048
Radio Shack . . . . . . . . . . . . .042, 847, 342, 824
Realistic . . . . . . . . . . . . . . . . . . . . . . . . . . . .234
Recoton . . . . . . . . . . . . . . . . . . . . . . . . . . . .427
Regal . . . . . . . . . . . . . . . . . . . . . .300, 047, 286
Regency . . . . . . . . . . . . . . . . . . . . . . . . . . . .029
Rembrandt . . . . . . . . . . . . . . . . . . . . . .038, 097
Runco . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .027
SL Marx . . . . . . . . . . . . . . . . . . . . . . . . . . . .067
Samsung . . . . . . . . . . . . . . . . . . . . . . . .067, 171
Scientific Atlanta . . . . . . . . . .035, 044, 033, 504
Seam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .537
Signal . . . . . . . . . . . . . . . . . . . . . . . . . .042, 067
Signature . . . . . . . . . . . . . . . . . . . . . . . . . . .038
Sprucer . . . . . . . . . . . . . . . . . . . . . . . . . . . . .048
StarSight . . . . . . . . . . . . . . . . . . . . . . . .569, 449
Starcom . . . . . . . . . . . . . . . . . . . . . . . .030, 042
Stargate . . . . . . . . . . . . . . . . .067, 042, 797, 824
Starquest . . . . . . . . . . . . . . . . . . . . . . . . . . .042
Sylvania . . . . . . . . . . . . . . . . . . . . . . . . . . . .028
TFC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .337
TV86 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .090
Tandy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .285
TeleCaption . . . . . . . . . . . . . . . . . . . . . . . . .248
Teleview . . . . . . . . . . . . . . . . . . . . . . . . . . . .067
Texscan . . . . . . . . . . . . . . . . . . . . . . . . . . . .028
Timeless . . . . . . . . . . . . . . . . . . . . . . . . . . . .445
Tocom . . . . . . . . . . . . . . . . . . . . . . . . .039, 040
Toshiba . . . . . . . . . . . . . . . . . . . . . . . . . . . . .027
Tusa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .042
Unika . . . . . . . . . . . . . . . . . . . . . .180, 234, 049
United Artists . . . . . . . . . . . . . . . . . . . . . . . .034
Universal . . . . . . . .234, 049, 066, 083, 180, 218
Viewstar . . . . . . . . . . . . . . . .285, 054, 087, 090
Zenith . . . . . . . . . . . . . . . . . . . . . .027, 552, 081
Zentek . . . . . . . . . . . . . . . . . . . . . . . . . . . . .427
LASER DISC BRAND AND REMOTE
CODE(S)
ADS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .880
Aiwa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .855
Carver . . . . . . . . . . . . . . . . . . . . . .853, 850, 858
Denon . . . . . . . . . . . . . . . . . . . . . .851, 875, 849
Disco Vision . . . . . . . . . . . . . . . . . . . . . . . . .848
Funai . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .855
Harman/Kardon . . . . . . . . . . . . . . . . . . . . . .853
Hitachi . . . . . . . . . . . . . . . . . . . . . . . . . . . . 848
Kenwood . . . . . . . . . . . . . . . . . . . . . . . . . . .877
Magnavox . . . . . . . . . . . . . . . . . . .853, 857, 875
Marantz . . . . . . . . . . . . . . . . . . . . . . . .853, 850
Mitsubishi . . . . . . . . . . . . . . . . . . . . . . . . . . 849
NAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .849
NEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .879
Nikkodo . . . . . . . . . . . . . . . . . . . . . . . . . . . .884
Optimus . . . . . . . . . . . . . . . . . . . . . . . . . . . .849
Panasonic . . . . . . . . . . . . . . . . . . . . . . . . . . .856
Philips . . . . . . . . . . . . . . . . . . . . . . . . .853, 850
Pioneer . . . . . . . . . . . . . . . . . . . . . . . . .849, 848
Polk Audio . . . . . . . . . . . . . . . . . . . . . . . . . .853
Quasar . . . . . . . . . . . . . . . . . . . . . . . . . . . . .856
RCA . . . . . . . . . . . . . . . . . . . . . . . . . . .881, 874
Realistic . . . . . . . . . . . . . . . . . . . . . . . . . . . .855
Samsung . . . . . . . . . . . . . . . . . . . . . . . . . . . .858
Sega . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 848
Sharp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .873
Sony . . . . . . . . . . . . . . . . . . . . . . .854, 852, 878
Technics . . . . . . . . . . . . . . . . . . . . . . . . . . . .856
Theta Digital . . . . . . . . . . . . . . . . . . . . . . . .853
Victor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .876
Yamaha . . . . . . . . . . . . . . . . . . . . . . . . . . . .857
DVD BRAND AND REMOTE CODE(S)
Denon . . . . . . . . . . . . . . . . . . . . . . . . . . . . .859
GE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .862
Harman/Kardon . . . . . . . . . . . . . . . . . . . . . .871
JVC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .868
Kenwood . . . . . . . . . . . . . . . . . . . . . . . . . . .865
Magnavox . . . . . . . . . . . . . . . . . . . . . . . . . .860
Marantz . . . . . . . . . . . . . . . . . . . . . . . . . . . .866
SATELLITE RECEIVER BRAND AND
REMOTE CODE(S)
AlphaStar . . . . . . . . . . . . . . . . . . . . . . . . . . . 799
Amplica . . . . . . . . . . . . . . . . . . . . . . . . . . . . 099
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture-in-Picture (PIP) • Basic Connections
USING PIP (BASIC CONNECTIONS)
icture-In-Picture (PIP) is the show-
Ping of two pictures on the TV screen
at the same time (one main screen pic-
ture and one small picture, or PIP). This
TV has two separate inputs (ANT[enna]
“A” and PIP ANT[enna] “B”) for your
home’s Antenna and/or Cable TV system
signals. ANT “A” is referred to on
Main Screen
Picture
Display the signal
supplied primarily
through the
ANT(enna) “A”
input on the back of
the TV.
PIP Window
Display the signal sup-
plied primarily through
the PIP ANT(enna) “B”
input on the back of
the TV.
screen as “TUNER-A,” and PIP ANT
“B” is referred to as “TUNER-B.”
The ANT “A” input is primarily for the
TV’ s main screen picture. The PIP
ANT “B” input is provided as a second
dedicated source option for the TV’s
PIP “window” and its feature opera-
tions. The signal connected to the PIP
ANT “B” input can be either a split sig-
nal input (as described and illustrated
on this page) or a separate external sig-
nal source (such as an additional home
antenna, satellite dish system, or video
accessory device).
Back of TV
Cable TV Signal
Cable TV
Company
See the following steps on how channels
connected to the PIP ANT(enna) “B”
input can be shown and used within the
PIP window.
RF Coaxial Cable
(75 Ohm)
Ω
Ω
PIP ANT(enna) “B” Input
BEGIN
Ω
Use an RF coaxial cable to con-
nect a cable or satellite signal to the
single 75-ohm input plug on a two-
way signal splitter (not supplied).
OR
3
Ω
Two-way
Signal Splitter
(Optional Accessory)
Connect two lengths of RF coax-
ial cable to the two output plugs on
the two-way signal splitter.
300- TO 75-Ohm
Adapter
ANT(enna) “A” Input
Connect one of the RF coaxial
cables coming from the two-way
signal splitter to the ANT(enna)
“A” input on the back of the set.
Then connect the other RF coaxial
cable coming from the two-way sig-
nal splitter to the PIP ANT(enna) “B”
input on the back of the TV.
Twin-lead Wire
Combination
VHF/UHF Antenna
NOTE: An outdoor or indoor
antenna can be used to receive
normal broadcast channels
2–13 (VHF) and 14–69 (UHF).
RF Coaxial Cable
(75 Ohm)
Continue to the next page.
SMART HELP
NOTE: The purpose of the PIP ANT(enna) “B” input (referred to as “TUNER-B” on
your TV screen) is to provide an easily connected, dedicated signal source for use with
PIP. A split signal (as illustrated on this page) is not the only option in connecting to the
PIP ANT(enna) “B” input. An additional outdoor or indoor antenna or a video game
player, for example, could also be connected and displayed on the TV’s PIP screen win-
dow through the use of the PIP ANT(enna) “B” input.
If you need accessories to
complete the described PIP
connections, see your dealer or call
our Parts Information Center at
1-800-851-8885.
See pages 1, 2, 7, and 8 in the Setup
and Quick Use Guide that came
with your set and pages 53 and 54 in
this manual for more information on
connections.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture-in-Picture (PIP) • Selecting the Signal Source
SELECTING THE PIP SIGNAL SOURCE
ow that you have completed at
Nleast a basic connection (as
shown on the previous page), you are
ready to use PIP.
Plug in the TV and turn it on.
Press the PIP button on the
remote control. The PIP window will
appear in one of the corners of the TV
screen.
Press the SOURCE button on the
remote control to access the PIP
ANT(enna) “B” input in the PIP win-
dow.
With a dedicated signal source
connected to the PIP ANT(enna)
“B” input on the back of the TV, you
can press the PIP CH(annel) DN/UP
buttons to change channels in the PIP
window.
POWER
7
WAP
VCR
PIP CH
ACC
4
SOURCE FREEZE
DN
UP
Details on the rest of the PIP remote
buttons are on the next page.
URE
SOUND
ME
SELE
STATUS/
EXIT
6
MUTE
VOL
CH
SMART HELP
1
4
7
2
5
8
0
3
6
You can connect accessory
devices to the AV1, AV2, AV3,
and S-VIDEO inputs for viewing in
the PIP window. (The Component
Video Inputs cannot be shown in
the PIP window.) After connecting
accessory devices, simply press the
SOURCE button to cycle through
and choose a signal source to dis-
play in PIP. See pages 7 and 8 in
the Setup and Quick Use Guide that
came with your TV and pages 53
and 54 of this manual for details on,
and examples of, accessory-device
connection options.
9
TV/VCR
A/CH
SURF
POSITION
PIP
5
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture-in-Picture (PIP) • Using Remote Control Buttons
USING THE PIP REMOTE CONTROL BUTTONS
ollow these steps to practice using
Fthe PIP buttons. You can change
the size of the PIP window, reposition
it, freeze its image, or swap its picture
with the main picture.
BEGIN
Press the PIP ON/OFF button to
show the PIP window. PIP appears in
one of the four corners of the screen.
Press the PIP ON/OFF button again to
reduce the window size. Press the PIP
ON/OFF button a third time to
remove the PIP window from the
main screen.
1. PIP ON/OFF
Press the PIP ON/OFF button to
show the PIP window again.
Press the POSITION button to
move the PIP picture to any of the
four corners.
3. POSITION
Press the FREEZE button to stop
the action within the PIP window.
Press the FREEZE button again to
resume normal viewing.
Press the SWAP button to swap
the main screen picture with the PIP
picture. Press the SWAP button again
to return the main and PIP screens to
their original positions.
POWER
4. FREEZE
4
TV
SWAP
VCR
PIP CH
ACC
When you are finished using PIP,
press the PIP ON/OFF button twice
to remove PIP from the screen.
SOURCE FREEZE
DN
UP
PICTURE
SOUND
5
MENU/
STATUS/
EXIT
SELECT
MUTE
VOL
CH
1
4
7
2
5
8
0
3
6
9
TV/VCR
A/CH
SURF
POSITION
PIP
5. SWAP
3
1
2
6
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture-in-Picture (PIP) • The Color and Tint Controls
ADJUSTING THE PIP COLOR AND TINT CONTROLS
he Picture-in-Picture (PIP)
TCOLOR and TINT controls allow
you to make fine-tune adjustments to
the PIP picture settings.
BEGIN
Press the MENU/SELECT but-
ton on the remote control to show the
on-screen menu.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AUTOLOCK
PIP
CLOSED CAP
Press the CURSOR RING
DOWN twice to highlight FEA-
TURES.
FEATURES
TIMER
TIME
AUTOLOCK
PIP
CLOSED CAP
START TIME
STOP TIME
CHANNEL
TUNER MODE
Press the CURSOR RING
RIGHT to enter the FEATURES
menu.
FEATURES
TIMER
POWER
Press the CURSOR RING
DOWN twice to highlight PIP.
COLOR
TINT
AUTOLOCK
PIP
CLOSED CAP
TV
VCR
PIP CH
ACC
Press the CURSOR RING
RIGHT again to shift the display to
the COLOR adjustment bar.
SWAP
SOURCE FREEZE
DN
UP
5
PICTURE
SOUND
3
MENU/
SELECT
TATUS/
EXIT
FEATURES
PIP
Press the CURSOR RING
RIGHT or LEFT to adjust the
COLOR bar to the desired level.
M
VOL
CH
COLOR
TINT
35
35
1
1
2
8
0
2
6
Press the CURSOR RING
DOWN to highlight the TINT adjust-
ment bar.
4
9
7
/VCR
A/CH
SURF
Press the CURSOR RING
RIGHT or LEFT to adjust the TINT
bar to the desired level.
POSITION
PIP
FEATURES
PIP
COLOR
TINT
Press the STATUS/EXIT button
to remove the menu from the screen.
35
52
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information • Using Connection Options
USING CONNECTION OPTIONS
Cable Box/DBS • VCR • TV
ere is an example of how you
Hcan make a cable box • VCR •
TV connection. .
BEGIN
Back of TV
Connect a cable TV signal to a
two-way signal splitter.
Ω
Connect an RF coaxial cable to
each of the two output plugs on the
two-way signal splitter.
3
Connect one of the RF coaxial
cables you just hooked up to the two-
way signal splitter to the PIP
ANT(enna) “B” input on the back of
the TV.
ANT "A" 75‰
Connect the other RF coaxial
cable from the two-way splitter to the
IN(put) on the cable box
Use another RF coaxial cable to
connect the OUT(put) on the cable
box to the ANTENNA IN(put) on a
VCR.
OUT
VIDEO
IN
OUT
Use another RF coaxial cable to
connect the ANTENNA OUT(put) on
the VCR to the ANT(enna) “A” input
on the back of the TV.
ANTENNA
OUT
1
Two-way
Signal
Splitter
L
R
AUDIO
IN
ANTENNA
IN
VCR
Use a video cable to connect the
VIDEO OUT(put) on the VCR to the
AV1 IN(put) for VIDEO on the back
of the TV.
Cable TV
Signal
OUT
IN
Use audio cables to connect the
R(ight) and L(eft) AUDIO OUT(puts)
on the VCR to the AV1 IN(puts) for
AUDIO on the back of the TV.
Cable Box
SMART HELP
See page 43 for details on
how to select the signal
sources you have connected.
If you need accessories or parts to
complete the described connections,
contact your dealer, or our Parts
Information Center at
1-800-851-8885.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information • Using Connection Options
USING CONNECTION OPTIONS
Back of TV
Cable Box • VCR • DVD
he example presented here
Tincludes the connection of a DVD
or other accessory device to the
Component Video inputs (labeled Y,
Pb, Pr) on the back of the TV.
Component Video provides you with
the best possible color and picture
resolution.
PIP ANT "B" 75Ω
NOTE: The signal routed to the TV’s PIP
ANT(enna) “B” input jack will allow for
the selection and viewing of cable channels
at the TV (except for scrambled premi-
um/movie channels). Press the SOURCE
button on the remote to select TUNER-B,
then press the PIP CH(annel) DN/UP but-
tons to choose channels.
ANT "A" 75‰
MT
IDEO
AV1 IN
AV2 IN
NOTE: The Component Video inputs
signal is viewable only on the main
screen, not in the PIP window.
Y
S-VIDEO
V
MONO/L
Pb
AUDIO
R
Pr
BEGIN
Connect a cable TV signal to a
two-way signal splitter.
Connect two RF coaxial cables to
the two-way signal splitter.
COMP VIDE
S-VIDEO
VIDEO
OUT
UDIO
OUT
Y
Pb
Pr
R
L
DVD or Other
Accessory Device
OUT
Connect one of the RF coaxial
cables you just hooked up to the two-
way splitter to the PIP ANT(enna) “B”
input on the back of the TV.
Connect the other RF coaxial
cable to the IN(put) on the cable box.
OUT
OUT
AUDIO
IN
ANTENNA
OUT
VIDEO
L
R
Use another RF coaxial cable to
connect the OUT(put) on the cable
box to the ANTENNA IN(put) on a
VCR.
ANTENNA
IN
IN
VCR
Use another RF coaxial cable to
connect the ANTENNA OUT(put) on
the VCR to the ANT(enna) “A” input
on the back of the TV.
OUT
IN
Cable Box
NOTES:
Use a video cable to connect the
VIDEO OUT(put) on the VCR to the
AV2 IN(put) for VIDEO on the back
of the TV. Also use audio cables to
connect the AUDIO OUT(puts) L(eft)
and R(ight) from the VCR to the AV2
IN(puts) for AUDIO on the back of
the TV.
• The signal routed to the TV’s
ANT(enna) “A” input will allow
premium/movie channels to be
viewable on the TV.
• You must select channels at the
cable box.
Two-way
Signal
Splitter
•
You must set your TV channel to
the same output channel (usually
CH 3 or 4) as the cable box before
it is possible to use the cable box to
change channels on the TV.
Cable TV
Company
Use component video cables to
connect the Component Video outputs
(Y, Pb, Pr) on the back of the DVD to
the Component Video inputs on the
back of the TV.
SMART HELP
See page 43 for details on
how to select the signal
sources you have connected.
Use audio cables to connect the
AUDIO OUT(puts) L(eft) and R(ight)
on the back of the DVD to the AV1
IN(puts) for AUDIO on the back of
the TV.
If you need accessories or parts to
complete the described connections,
contact your dealer, or our Parts
Information Center at
1-800-851-8885.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information • Helpful Hints
HELPFUL HINTS
If you are having difficulties with your product, check this list of difficulties and possible solutions before requesting service. You
may be able to solve the problem yourself. Charges for TV installation and adjustment of customer controls are not covered under
your warranty. If you need to call a customer service representative, please know the model number and serial number of your prod-
uct before you call. This information is displayed on the back of the product. Also, please take a moment to identify the problem you
are having, and be prepared to explain this to the representative. If you believe the representative will need to help you with opera-
tions, please stay near the product. Our representative will be happy to assist you.
CAUTION
The continual presence of nonmoving images on your TV screen can damage the picture tube.
A video source such as a video game, CDI, or TV information channel that shows a constant nonmoving pattern on the TV screen
can damage the picture tube. When your TV is continuously used with such a source, the nonmoving portion of the on-screen image
can become permanently fixed on the picture tube. When you are not using the video source, turn it off. Also, regularly alternate the
use of such video sources with normal TV viewing.
Cleaning and Care
• To avoid possible shock hazard, be sure the TV is unplugged from the electrical outlet before cleaning.
• When you are cleaning the TV, take care not to scratch or damage the screen surface. Avoid wearing jewelry or using anything
abrasive. Wipe the front screen with a cloth dampened with water. Use even, easy, vertical strokes when cleaning.
• Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool, clear water. Use a clean, dry cloth
to dry the wiped surfaces.
• Never use thinners, insecticide sprays or other chemicals on or near the cabinet, as they might cause permanent marring of the
cabinet finish.
No power
• Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert the plug into the outlet and push the remote control
power or TV power/standby button again. The location of the TV power/standby button is illustrated on page *S-2.
• Check that the outlet is not on a wall switch.
• If you are using an AC power strip, be sure the fuse on the power strip is not blown.
No picture
• Check antenna or cable connections to your TV. Be sure they are secure. Details are on pages *S-1, *S-2, 49, 53, and 54.
• Check the Tuner Mode control for the correct tuner setting. Details are on page *S-5.
• Try running the Auto Program feature. Details are on page *S-5.
• Press the AV button on the remote to ensure that the correct signal source is selected (Tuner-A, Tuner-B, AV 1, CVI, AV 2, or
AV 3). Details are on page 43.
No Sound
• Check the volume buttons. Details are on pages *S-2, *S-3, and 42.
• Check the mute button on the remote. Details are on page *S-3.
• Check the Audio Out and Speaker controls. Details are on pages 35 and 36.
• If you are attempting to connect auxiliary equipment, check the audio connections. Details are on pages *S-7, *S-8, 53, and 54.
• If applicable, check the audio receiver for the correct operating mode. Details are on page 36.
Remote does not work
• Check the batteries. If necessary, replace them with AA heavy duty (zinc chloride) or alkaline batteries. Details are on page *S-2.
• Clean the remote control and the remote sensor window on the TV. To locate the TV remote sensor window, see page *S-2.
• Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert the plug into the outlet and push the remote power or
TV power/standby button again. To locate the TV power/standby button, see page *S-2.
• If you are using an AC power strip, be sure the fuse on the power strip is not blown.
• Check to be sure the TV is not on a wall switch.
TV displays wrong channel or no channels above 13
• Select the channel again.
• Add the desired channel numbers into the TV using the Channel Edit control. Details are on page *S-6.
• Check to be sure the tuner mode is properly set.
*S refers to the Setup and Quick Use Guide that came with your TV.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information • Glossary
GLOSSARY OF TELEVISION TERMS
Audio/Video Inputs ¥ Connectors (RCA phono-type plug),
located on the back of the TV, used for the input of audio and
video signals. These inputs are designed for use with VCRs (or
other accessories) to receive higher picture resolution and offer
sound-connection options.
Programming ¥ The process of adding or deleting channel num-
bers in the televisionÕs memory circuits. Through programming,
the TV ÒremembersÓ only the locally available or desired chan-
nel numbers and skips over any unwanted channel numbers.
PTV ¥ Projection Television. (Rear- and/or front-projection
Closed Captioning ¥ The broadcast standard feature that allows
you to read the voice content of television programs on the TV
screen. Designed to help the hearing impaired, Closed
Captioning uses on-screen text boxes to show dialogue and con-
versations while a TV program is in progress.
design systems are available.)
Remote Control Sensor Window ¥ The window or opening
found on the television control panel through which infrared
remote control command signals are received.
RF ¥ Radio Frequency or modulated signal design used as the
carrier for television broadcasts.
Component Video Input ¥ The input that allows the separate
reception of blue, red, and luminance signals. Provides the high-
est possible color and picture resolution in the playback of digi-
tal signal source material, such as the kind available from DVD
players. Allows improved bandwidth information not possible
through composite video (A/V) or S-Video Connections.
RF coaxial cable ¥ Used to connected a broadcast or cable sig-
nal to the TV. Also can be used to connect a VCR to the TV (or
cable box or DBS).
Second Audio Program (SAP) ¥ An additional audio channel
provided for in the Multichannel Television Sound (MTS) broad-
cast standard. A monaural soundtrack included within the record-
ed or video signal (usually containing a second language transla-
tion for the displayed programming).
Identify ¥ The method by which a TV remote control searches
and finds an operating code for another product (such as a VCR
or a cable converter). After the code has been Òidentified,Ó the
TV remote control can operate and send commands to the other
product.
Status ¥ Allows the user to quickly confirm what channel num-
ber is currently being viewed. Status can also be used to clear
the TV of on-screen displays or information (rather than waiting
for the displays to Òtime out,Ó or automatically disappear from
the screen).
Incredible Stereo (or Surround) ¥ False acoustic management
of the audio signal that produces a dramatic expansion of the
wall of sound that surrounds the listener and heightens overall
viewing pleasure.
Menu ¥ An on-screen list of feature controls that are available
for you to adjust.
S-Video Input ¥ Signal input that allows direct connection of
high-resolution video sources, such as satellite, DVD (digital
video disc), S (Super)-VHS videocassette recorder, or video
games. Provides improved picture resolution, sharpness, and
clarity.
Multichannel Television Sound (MTS) ¥ The broadcast stan-
dard that allows for stereo sound to be transmitted with the TV
picture.
TwinÐlead Wire ¥ The more commonly used name for the two-
strand, 300-ohm antenna wire used with many indoor and out-
door antenna systems. In many cases, this type of antenna wire
requires an additional adapter (or balun) in order to connect to
the 75-ohm input terminals designed into the more recent TVs
and VCRs.
On-screen Displays (OSD) ¥ The wording or messages generat-
ed by the television (or VCR) to help you with specific feature
controls (color adjustment or programming, for example).
Picture-in-Picture ¥ The showing of two pictures on the TV
screen at the same time (one main screen picture and one small
picture, or PIP).
56
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information • Index
INDEX
alternate channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 ImageMax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
antenna hookup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .*S-1, 49 language control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .*S-5
audio out control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 name control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .*S-7
audio outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 on-screen menu controls . . . . . . . . . . . . . . . . . . . . . . . . . .*S-4
audio/video (AV) inputs . . . . . . . . . . . . . . . .*S-7, *S-8, 53–54 picture adjustment controls . . . . . . . . . . . . . . . . . . . . . . . . . . .6
AutoChron control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .*S-6 PIP (picture-in-picture)
AutoLock control
basic connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
color and tint controls . . . . . . . . . . . . . . . . . . . . . . . . . . .52
remote control buttons . . . . . . . . . . . . . . . . . . . . . . . . . . .51
signal source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
access code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
blocking channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
clearing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
movie ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 program list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
no rating broadcasts . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 registration/welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
on/off control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 remote control
settings review . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
unrated broadcasts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
battery installation . . . . . . . . . . . . . . . . . . . . . . . . . . . .*S-2
button descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . .*S-3
AutoPicture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 safety/precautions . . . . . . . . . . . . . . . . . . . . .*S-1,*S-2, 2, 3, 55
auto program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .*S-5 SAP (second audio program) . . . . . . . . . . . . . . . . . . . . . . . . .34
AutoSound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 signal source options . . . . . . . . . . . . . . . . . . . . . . . . . . . .53–54
av button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 sleep timer control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
AVL (audio volume leveler) control . . . . . . . . . . . . . . . . . . .32 speakers control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
balance control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 stereo/mono control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
bass boost control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 super video (s-video) inputs . . . . . . . . . . . . . . . . . . .*S-7, *S-8
cable converter box connections . . . . . . . . . . . . . . .*S-2, 53–54 surf button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
cable TV hookup . . . . . . . . . . . . . . . . . . .*S-1, *S-2, 49, 53–54 table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
channel edit control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .*S-6 timer control
channel name control . . . . . . . . . . . . . . . . . . . . . . . . . . . . .*S-7
clock (timer control) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
closed captioning control . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
component video inputs (CVI) . . . . . . . . . . . . . .*S-7, *S-8, 54
connections
activate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
channel selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
start time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
stop time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
time display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
tuner selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
treble control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
accessory devices . . . . . . . . . . . . . . . . . .*S-7, *S-8, 53–54
basic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .*S-1, *S-2, 49
convergence controls
red/blue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 tuner mode control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .*S-5
multipoint red/blue . . . . . . . . . . . . . . . . . . . . . . . . . . .10–11 TV buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .*S-2, *S-4
save multipoint settings . . . . . . . . . . . . . . . . . . . . . . .10–11 VCR connections . . . . . . . . . . . . . . . . . . . . .*S-2, *S-7, 53–54
undo multipoint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 volume control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
DNR (dynamic noise reduction) control . . . . . . . . . . . . . . . . .7 warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
*S refers to the Setup and Quick Use Guide that came with your TV.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Philips Factory Service Locations
FACTORY SERVICE LOCATIONS
Detroit/Toledo
•
Cleveland/
•
•
N Ohio •
•
Chicago
★ Columbus
•
San Francisco/Metro Area
★ Los Angeles
Charlotte
★
•
★ Pittsburgh/WV Area
Knoxville/E Tennessee
•
•
•
Philadelphia/S New Jersey
Atlanta/N Georgia
• Dallas
★ Wash/Balt
★ Orlando
•
Houston
Tampa/W Florida
★ Ft. Myers/SW Florida
•
★ Indicates In-Home Service Only
★ Miami/SE Florida
• Indicates In-Home/Carry-In Service
NOTE: If you reside in one of our Philips Factory Service Branch areas (see directory on back), you can contact the nearest Service Branch to
obtain efficient and expedient repair for your product. If your product is In-Warranty, you should have proof-of-purchase to ensure No Charge
Service. For Out-of-Warranty service, call the location nearest you.
NOTA: Si vous résidez dans une des régions desservies par une succursale de service après vente du fabricant Philips (voir liste ci-dessous),
vous pourrez contacter la branche de service après vente la plus près de chez vous pour obtenir un service après vente rapide et efficace. Si le
produit est sous garantie, il suffira de présenter une preuve d`achat pour bénéficier d'un service sans frais. Pour les produits non couverts par la
garantie, contactez le centre le plus près de chez vous.
NOTA: Si Ud. reside en una de nuestras zonas para sucursales Philips de servicio al de fábrica (ver directorio más abajo), Ud. puede comunicarse
con la sucursal de servicio más cercana para obtener una reparación oportuna y eficaz de su producto. Si su producto está todavía bajo garan-
tía, Ud. debe presentar comprobante de compra para no ocasionar ningunos cargos por servicio. Para servicio después del vencimiento de la
garantía, llame al lugar más cercano de los abajo indicados.
In Canada
How you can obtain efficient and expedient carry-in, mail-in, or in-home service for your product
Please contact Philips at
1-800-661-6162 (French speaking)
1-800-363-7278 (English speaking)
Au Canada
Comment obtenir le service après-vente pour les produits apportés ou envoyés par la poste à notre centre de service ou le service à domicile
Veuillez contacter philips á:
1-800-661-6162 (Francophone)
1-800-363-7278
En el Canadá
Cómo recibir servicio efficiente para su producto, en persona, por correo o a domicillo
Favor de comunicarse con Philips al:
1-800-661-6162 (francófono)
1-800-363-7278 (anglófono)
EL4482-3 Rev. CC
3135 015 07541
MAC2929 Rev. BB - 1/1/2001
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Philips Factory Service Locations
FACTORY SERVICE LOCATIONS
QUALITY SERVICE IS AS CLOSE AS YOUR TELEPHONE! SIMPLY LOOK OVER THE LIST BELOW FOR THE NUMBER OF A FACTORY SERVICE CENTER
NEAR YOU. YOUR PRODUCT WILL RECEIVE EFFICIENT AND EXPEDIENT CARRY-IN, MAIL-IN, OR IN-HOME SERVICE, AND YOU WILL RECEIVE PEACE OF MIND,
KNOWING YOUR PRODUCT IS BEING GIVEN THE EXPERT ATTENTION OF PHILIPS’ FACTORY SERVICE.
COMMENT OBTENIR NOTRE SERVICE APRÈS VENTE RAPIDE ET EFFICACE SOIT PAR COURRIER, À DOMICILE, OU EN SE PRÉSENTANT À UN CENTRE DE SERVICE PHILIPS. PLUS DE 600 CENTRES
DE RÉCEPTION DE PRODUITS À RÉPARER À TRAVERS LE PAYS: CONTACTER LE CENTRE DE SERVICE AUX CONSOMMATEURS LE PLUS PROCHE POUR SAVOIR L’EMPLACEMENT DE CES DÉPÔTS
DANS UN RAYON DE 50 À 75 MILES (80 KM À 120 KM) DU CENTRE DE SERVICE LOCAL.
CÓMO OBTENER UN SERVICIO OPORTUNO Y EFICIENTE POR CORREO, EN CASA O EN PERSONA PARA SU PRODUCTO A TRAVÉS DE UN CENTRO PHILIPS DE SERVICIO. MAS DE 600 SITIOS POR
TODO EL PAIS PARA LA RECEPCION DE PRODUCTOS NECESITADOS DE REPARACIONES: COMUNICARSE CON EL CENTRO DE SERVICIO DE FABRICA MAS CERCANO PARA ESTOS LUGARES DENTRO
DE UN RADIO DE 80 A 120 KM (50 A 75 MILLAS) DEL CENTRO DE SERVICIO LOCAL.
ATLANTA
CLEVELAND
CHICAGO
Philips Factory Service
200 N. Cobb Pkwy., Suite 120
Marietta, GA 30062
800-273-1501
Philips Factory Service
950 Keynote Circle
Brooklyn Heights, OH 44131
800-331-7037
Philips Factory Service
1279 W. Hamilton Pkwy.
Itasca, IL 60143
800-531-2922
TAMPA
DETROIT
KNOXVILLE
Philips Factory Service
1911 US Highway 301 North
Tampa, FL 33619
800-442-2027
Philips Factory Service
25173 Dequindre
Madison Heights, MI 48071
800-438-1398
Philips Factory Service
6700 D Papermill Rd.
Knoxville, TN 37919
800-821-1767
SAN FRANCISCO
Philips Factory Service
681 East Brokaw Rd.
San Jose, CA 95112
800-300-9013
DALLAS
PHILADELPHIA
Philips Factory Service
415 N. Main Street, #107
Euless, TX 76040
800-952-3254
Philips Factory Service
352 Dunks Ferry Rd.
Bensalem, PA 19020
800-847-9320
HOUSTON
Philips Factory Service
1110 N. Post Oak Rd., Suite 100
Houston, TX 77055
800-952-3254
MAC2929 1/1/2001
59
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
PRO JECTIO N TELEVISIO N
One Year Free Labor
One Year Free Service on Parts
Two Years Free Service on Cathode Ray Tube Parts / 30 days Free Service on Projection TV Screen
This product can be repaired in-home.
W HO IS CO VERED?
MAKE SURE YO U KEEP...
You must have proof of purchase to receive warranty service. A sales
receipt or other document showing that you purchased the product is
considered proof of purchase.
Please keep your sales receipt or other document showing proof of
purchase. Attach it to this owner’s manual and keep both nearby.
Also keep the original box and packing material in case you need to
return your product.
W HAT IS CO VERED?
Warranty coverage begins the day you buy your product. for one year
thereafter (30 days for the projection TV screen), all parts will be
repaired or replaced, and labor and transportation are free. From one to
two years from the day of purchase, you pay for the replacement or
repair of all parts except the cathode ray tube and the “Clear-Vu” lens,
and for all labor and transportation charges. After two years from the
day of purchase, you pay for the replacement or repair of all parts except
the “Clear-Vu” lens (which is guaranteed against manufacturer’s defects
for the life of the product), and for all labor and transportation charges.
BEFO RE REQ UESTING SERVICE...
Please check your owner’s manual before requesting service.
Adjustments of the controls discussed there may save you a service
call.
TO GET W ARRANTY SERVICE...
Repair must be performed by an authorized service center or a factory
service center. If you do not live near a factory service center, contact
your dealer. If your dealer is an authorized service center, he will
arrange repair. If your dealer is not an authorized service center, he
will direct you to the authorized service center engaged by him to
service the products he sells.
All parts, including repaired and replaced parts, are covered only for
the original warranty period. When the warranty on the product
expires, the warranty on all replaced and repaired parts also expires.
(In U.S.A., Puerto Rico and U.S. Virgin Islands, all implied warranties,
including implied warranties of merchantability and fitness for a partic-
ular purpose, are limited in duration to the duration of this express
warranty. But, because some states do not allow limitations on how
long an implied warranty may last, this limitation may not apply to
you.)
W HAT IS EXCLUDED?
Your warranty does not cover:
•
labor charges for installation or setup of the product, adjustment of
customer controls on the product, and installation or repair of
antenna systems outside of the product.
(In Canada, this warranty is given in lieu of all other warranties. No
other warranties are expressed or implied, including any implied war-
ranties of merchantability or fitness for a particular purpose. Philips is
not liable under any circumstances for any direct, indirect, special, inci-
dental or consequential damages, howsoever incurred, even if notified
of the possibility of such damages.)
•
product repair and/or part replacement because of misuse, acci-
dent, unauthorized repair or other cause not within the control of
Philips Consumer Electronics Company.
•
•
reception problems caused by signal conditions or cable or antenna
systems outside the unit.
a product that requires modification or adaptation to enable it to
operate in any country other than the country for which it was
designed, manufactured, approved and/or authorized, or repair of
products damaged by these modifications.
IF YO U HAVE Q UESTIO NS...
Please contact Philips at:
•
incidental or consequential damages resulting from the product.
(Some states do not allow the exclusion of incidental or consequen-
tial damages, so the above exclusion may not apply to you. This
includes, but is not limited to, prerecorded material, whether copy-
righted or not copyrighted.)
1-800-661-6162 (French Speaking)
1-800-363-7278 (English Speaking)
REMEMBER...
Please record the model and serial numbers found on the product
below. Also, please fill out and mail your warranty registration card
promptly. It will be easier for us to notify you if necessary.
•
a product used for commercial or institutional purposes.
W HERE IS SERVICE AVAILABLE?
Warranty service is available in all countries where the product is offi-
cially distributed by Philips Consumer Electronics Company. In coun-
tries where Philips Consumer Electronics Company does not distribute
the product, the local Philips service organization will attempt to pro-
vide service (although there may be a delay if the appropriate spare
parts and technical manual(s) are not readily available).
MODEL # ________________________________________________
SERIAL # ________________________________________________
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
Philips Service Company, P.O. Box 2976, Longview, Texas 75606, (903) 242-4800
60
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Pelco Computer Monitor VBP3000 User Manual
Philips Computer Hardware PSC 604 User Manual
Philips MP3 Player ACT400 01 User Manual
Philips Telephone XL3402 User Manual
Philips TV Cables SWV6371 User Manual
Philips TV VCR Combo 14PV120 07 User Manual
Philips VCR VR250 User Manual
Poulan Trimmer PP333 User Manual
Powermate Portable Generator PM0435252 User Manual
Prima Flat Panel Television LV 1958P User Manual