Quick Use and Setup Guide
HDTV Monitor
with Pixel Plus
™
™
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS UNIT TO RAIN OR EXCESSIVE MOISTURE.
Contents
Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Positioning the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Making Basic Connections to the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1–2
IMPORTANT! Initial TV Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Using the TV Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Using the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3–4
Using the On-screen Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Using the Demo Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Using the Installation Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-7
Using Auto IntelliSense™ to Adjust Picture Convergence . . . . . . . . . . . . . . . . .8
As an Energy Star® Partner, Philips Consumer Electronics has deter-
mined this product meets the Energy Star® guidelines for energy
efficiency. Energy Star® is a U.S. registered mark. Using products
with the Energy Star® label can save energy. Saving energy reduces air pollution
and lowers utility bills.
NOTE: Your Philips projection television has three color picture
tubes that are aligned at the factory to make the light beams come
together, or converge, on the screen properly. Transporting or
moving the TV can cause the tubes to be misaligned. Color
fringes or haloes around images in the picture are the result. With
Auto IntelliSense™, automatically adjust picture convergence at
the push of a button. Auto IntelliSense™ Focus responds to the
natural and man-made magnetic field conditions where the projec-
tion TV is located, so you can easily enjoy a well-converged pic-
ture.See page 8 for details. NOTE: You should allow the TV to
warm up for at least 20 minutes before making this adjustment.
Positioning theTV
Before connecting accessory devices—VCR, DVD player, or HD
receiver, for example—please keep the following in mind:
Situate the TV where it
will not be exposed to
heat or moisture.
For safety, do not set
objects on top of the TV.
•
•
Allow 4 to 6 inches of space behind the TV for ventilation.
Test various locations in the room to find the optimal spot to
locate the set for best viewing.
•
•
•
Do not place the TV in direct sunlight or near a heating appliance.
Do not expose the TV to rain or moisture.
To prevent any unsafe situations, do not place objects on top of
the TV.
Allow 4 to 6 inches
behind the TV for
ventilation.
V
O
L
U
M
E
CHANNE
L
TLE
M
ENU
POWER
Making Basic Connections to theTV
NOTE: See the Directions for Use manual for more detailed
information and more connection examples.
Incoming
Cable TV
Signal
CableTV
Connect the cable TV signal to the ANTENNA IN 75Ω jack on the
back of the TV. See page 7 for details on using Autoprogram to
store channels in the TV’s memory.
Back of TV
ANTENNA IN 75Ω
AMP SWITCH
EXT
INT
NOTE: This connection will supply stereo sound to the TV if it is
being broadcast by the station you are watching.
_
+
HD INPUT-AV
4
3
DVI
CENTER CHANNEL AMP INPUT
HD INPUT-AV
G/Y
A
N
T
E
N
N
A
I
N
7
5
Ω
AMP SWITCH
EXT
INT
_
+
H
D
I
N
P
U
T
-
A
V
4
3
DVI
C
E
N
T
E
R
C
H
A
N
N
E
L
A
M
P
I
N
P
U
T
H
D
I
N
P
U
T
-
A
V
G/Y
R/Pr
R/Pr
B/Pb
I
N
P
U
T
-
A
V
1
OUTPUT
I
N
P
U
T
-
A
V
2
SUBWOOFER
Y
INPUT-AV
1
OUTPUT
INPUT-AV
VIDEO
2
SUBWOOFER
VIDEO
S-VIDEO
VIDEO
S-V
IDEO
L
Pb
Pr
L
V
L
L
L
L
SYNC
H
AUDIO
R
AUDIO
R
AUDIO
R
AUDIO
R
Y
B/Pb
VIDEO
S-VIDEO
S-VIDEO
L
L
Pb
Pr
V
L
L
L
L
SYNC
AUDIO
R
AUDIO
R
AUDIO
R
AUDIO
H
R
3135 035 21411
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT! InitialTV Setup
When you turn on your TV for the first time it will prompt you to enter
Language
Autoprogram
some setup information about Language preference and Channel program-
ming. See page 6-7, “Using the Installation Features” in this Quick Use and
Setup Guide for more information about these menus.
Select your menu language with
the cursor up/down.
Press the OK key on the remote
control to confirm.
Using theTV Buttons
Your television has a set of buttons located on the front of
the cabinet for use when the remote control is not needed or
unavailable.
Picture Sound Features Channels
Press the Power button to turn the TV on.
TV
1
2
Settings
Demo
Install
Exit
Press the VOLUME + (up) button to increase the sound
level or the VOLUME – (down) button to lower the sound
level. Or use the buttons to navigate right or left when the
on-screen menu is displayed.
Press the CHANNEL K (up) or L (down) button to select
TV channels. Or use the buttons to navigate up and down
when the on-screen menu is displayed.
5
V
O
L
U
M
E
CHANN
EL
ITELLI
SENSE
MENU
O
3
2
4
To access the on-screen menu, press the MENU button. To
navigate the menu, use the VOLUME + (up)/– (down) and
CHANNEL K (up)/L (down) buttons to navigate the menu
as described in the previous steps.
Blue LED indicator
4
4
To remove the menu, Press CHANNEL Down to select Exit.
Then press the MENU button,
5
1
5
3
4
Using the Remote Control
Installing the Batteries
To load the supplied batteries into the remote:
Remove the battery compartment door on the back of
the remote.
3
1
2
Place the batteries (2-AA) in the remote. Make sure the (+)
and (–) ends of the batteries line up correctly (the inside of
Remote Control
(shown from the bottom)
the case is marked).
Reattach the battery compartment door.
3
1
Be sure to point the remote at the Remote Sensor window on the
front of the television when using it to operate the television.
HELPFUL HINT
2
When the batteries in your remote control run low, the remote
control will send a “Battery low” command to the TV. The TV
will then display a message on the screen reminding you to
replace the batteries as soon as possible.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
Remote Control Buttons
Standby–On
Press to turn the TV on or off.
NOTE: The TV is never really powered off completely
unless it is physically unplugged from the power source.
Select (CBLVCR DVD SAT AMP) and Backlight
Press this button to cycle across the accessory mode dial.
Stop pressing when the mode you desire is lighted. The
light will stay on for 2 seconds and then begin blinking to
indicate the remote is in your desired mode. Once the
mode is selected, you must press a button within 60 sec-
onds for the remote to remain in the selected mode or it
will default back to the TV mode. Pressing and holding
the Select button for 2 seconds backlights the remote
control buttons. The buttons remain lighted for 5 seconds
after you press Select.
Surround Sound
Press to display and toggle a list of available sound
modes. Choose from Incredible Surround™ and Dolby*
Virtual settings. (See page 42 in the Directions for Use
manual.)
VCR Functions
When the remote is in the VCR mode, these buttons will
allow you start a recording (G), rewind a tape (ᮤᮤ),
stop the playback of a tape (G), play a videotape (ᮣ), or
fast-forward a videotape (ᮣᮣ).
Source
Press to display a list of source options—TV, AV1, CVI,
AV2, AV3, AV4, or Side. If you have labeled the source
you desire, press the Source Select button to toggle to the
source. If you have not labeled the source, use the Cursor
Up/Down buttons to select the source, then press the OK
button to confirm.
Time Display
Press to display the current time on the TV screen.
CC (Closed Captioning)
Press to toggle Closed Captioning off, on, or on during
mute. (See page 64 in the Directions for Use manual.)
Alternate Audio (SAP)
When you tune to a channel where SAP (Second Audio
Program) is available, you can toggle between Main and
SAP. If SAP is not available, the Alternate Audio menu
item cannot be selected. (See page 43 in the Directions
for Use manual.)
Cursor Up, Down, Right, Left
Use to navigate the on-screen menu and make control
adjustments or settings.
®
Additionally, use these buttons to pan the screen up or
down to show any excluded parts of the picture. Left or
right panning is possible with the Side input source when
“Game” is selected as the type of source for the Side
input.
Also use with the Dual Screen/PIP feature to select a
screen, as well as resize or reposition a PIP screen. (See
page 61 in the Directions for Use manual.)
Pixel Plus™ Demo
®
®
Press to activate the demo, which illustrates the benefits
of Pixel Plus™. Press and the TV screen will be divided
in half displaying the Pixel Plus™ Demo. The left side
will show the picture with Pixel Plus™ switched off. The
right side of the screen will show the picture with Pixel
Plus™ switched on. Press the Pixel Plus™ button again
to turn the demo off. (See page 31 in the Directions for
Use manual.)
®
Menu On/Off
Press to display the TV’s on-screen menu or to turn it off.
OK
CH (Channel Selection)
Press to activate or confirm menu choices.
Press to browse through the TV channels. If you press
and hold the channel will change slowly for five chan-
nels, then rapidly scroll through the channels. release the
button to stop.
Freeze Format
Pressing will apply one of the Freeze modes you set
using the on-screen menu. See page 62 in the Directions
for Use manual.
Digit (Number Buttons)
Freeze mode stops action in the main screen. Sound
will continue to be heard. Press again to resume nor-
mal viewing.
Replay mode displays a few seconds of stored video
in the PIP window.
Photo Finish mode displays six stored frames from
the picture.
Press to directly access a specific TV channel. For a two-
or three-digit channel, enter all numbers. Press a single-
digit button and hold a bit longer to directly access a sin-
gle-digit channel. These buttons can also be used to enter
values in certain on-screen menu controls.
PᮤP (AutoSurf™)
If you set the Surf control in the TV’s on-screen menu to
two channels, this button will allow you to toggle between
the current channel and the last viewed channel. If you
choose the nine-channel Surf, pressing this button allows
you to access the Surf list, where you can add, remove,
and scroll up to nine of your favorite channels. See page
59 in the Directions for Use manual.
NOTE: Continuing to hold the Freeze Format button
down will cycle the TV through the Freeze modes:
Freeze, Replay, and Photo Finish.
VOL (Volume)
Press + or – to adjust the volume.
Mute
Press to interrupt or restore sound.
Picture Format
Information Plus+
Press to display a list of available picture formats for
showing video images in the traditional 4:3 proportions.
Press this button repeatedly to select a picture format.
Choose from Automatic, Super zoom, Panoramic, 4:3,
Movie expand 14:9, Movie expand 16:9, 16:9 subtitle,
and Wide screen. See pages 35–36 in the Directions for
Use manual.
Press to show information (when available) about the
current channel, program, source, number or name, local
time, CC availability, SAP availability, program ratings,
display format, sound mode, and remaining length of a
Sleeptimer setting.
Dual Screen/PIP (Picture-in-Picture)
NOTE: To switch between a full or 4:3 letterbox picture
format in Dual Screen mode, press the Picture Format
button.
Active Control Plus™
NOTE: Active Control™ Plus is not available for use
with the AV3 and AV4 input sources.
Press to turn the PIP dual screen on or off. Continuing to
hold the Dual Screen/PIP button down will cycle through
the Dual Screen/PIP options. (See page 61 in the
Directions for Use manual.)
Press to display the Active Control Plus™ screen. With
the “Active Control” submenu selected, press the Cursor
Up or Down button to select Off, Minimum, Medium, or
Maximum. Maximum is the recommended option. Press
the Cursor Right button to select the “Auto Picture” or
“Active Display” submenus, then press the Cursor Up or
Down buttons to make selections. See pages 27-29 in the
Directions for Use manual.
Active Control Plus, AutoSurf, Incredible Surround, and Pixel Plus are trademarks of Philips Consumer Electronics. Copyright 2003 Philips
Consumer Electronics. All rights reserved.
*Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the On-screen Menu
The TV’s on-screen menu controls are viewed within a
The first time you turn on the TV after purchasing it, it will be in a special mode designed to
inform you that you can change the menu language and on-screen displays to English, French, or
Spanish. Also included in this mode is Autoprogram to encourage you to have the set program
channels into the TV’s memory. For more details on the Language and Autoprogram features, see
pages 6 and 7.
mobile map or pipe system. This system allows you to
move along linked paths tied to specific Feature Title cate-
gories (“TV,” “Picture,” “Sound,” “Features,” and
“Channels”). Each press of a Cursor button on the remote
moves the cursor control to balls indicating specific con-
trols. Each specific control may have multiple features that
can be adjusted or set. The animated on-screen menu struc-
ture will expand to show all available on-screen controls. As
it expands, it will display a series of balls grouped together
to reveal more controls.
Picture Sound Features Channels
Picture Sound Features Channels
TV
Settings
Demo
TV
Settings
Demo
Balls
Pipes represent the structure of the on-screen menu. They
Install
Install
Direction
Indicator
tie all the controls together and show the path you can fol-
low to access the available controls.
1
Pipes
Feature Titles
or Controls
Balls indicate the titles of features or controls available on
this television. When highlighted, some of these controls
2
may show more Pipes and Balls, indicating subcategories
or lists of controls within the highlighted control. These
subcontrols will also have Pipes and Balls.
Picture Sound Features Channels
The Direction Indicator tells you which way movement
may take place within the on-screen menu. The arrows on
the Direction Indicator simulate the Cursor buttons on the
remote control (Up, Down, Left, or Right).
TV
Settings
Demo
3
1
2
3
The Slider controls will be displayed on some features,
allowing adjustments to the values. Some may show a box
containing a list of multiple options settings. Others may
have only an “On” or “Off” option.
Install
6
5
4
To navigate the on-screen menu, start by pressing the Menu
button on the remote control. This will display the on-
screen menu in its starting position.
5
6
6
Picture
Press the Cursor Down button to select any of the Setting,
Demo, or Install controls. Starting from the TV item, press
the Cursor Right button on the remote control to select any
of the Picture, Sound, Features, or Channel controls.
TV
Auto picture
Contrast
40
This publication contains details on “Using the Demo Mode,”
“Using the Installation Features,” and “Using Auto IntelliSense™
to Adjust Picture Convergence.” Refer to the Directions for Use
manual for all other control descriptions (Picture, Sound,
Features, Channels, or Settings).
Brightness
Color
4
Sharpness
HELPFUL HINT
Pressing the Menu button once will display the on-screen menu.
Pressing the Menu button any time the on-screen menu is dis-
played will remove the on-screen menu from the TV screen.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Demo Mode
Several features of this television can be placed in a demo
Picture Sound Features Channels
mode, which will show you how a feature works. Auto
Demo will automatically show all the feature demos one
after another except for the Dealer Demo mode. Specific
demo modes can be selected from the list of options within
the Demo control (Auto demo, Dual screen, PIP, and Install,
for example).
TV
Settings
Demo
TV
Settings
Demo
Auto demo
Dual screen
Freeze-Replay-Photo finish
PIP
Zoom
Install
- - -
Install
Install
3
5
4
The Dealer Demo also has a sublist of the following
options: Digital options, Lightsensor, and 3D Y/C Comb
filter.
Press the Cursor Down button to see
more Demo Mode options.
Press the Menu button on the remote control to show the
on-screen menu.
Auto demo
Dual screen
Freeze-Replay-Photo finish
PIP
Zoom
Install
- - -
1
2
3
4
Demo
- - -
Zoom
Install
Main menu
Picture
2
4
Press the Cursor Down button repeatedly until “Demo”
is selected.
Demo
1
Active Control
Dealer demo
Press the Cursor Right button to shift the menu to display
the list of Demo mode options.
Press the Cursor Down or Up button to select a Demo
mode option.
To see the Dealer Demo sublist,
press the Cursor Down button to
select Dealer Demo, then press the
Cursor right. Press the Cursor
Down or Up to select a mode, then
press the Cursor Right to activate
the mode.
Press the Cursor Right button to activate the Demo.
Dealer demo
Digital options
Lightsensor
3D Y/C Comb filter
5
Using the Installation Features
Language
For Spanish- and French-speaking TV owners, an on-screen
Language option is present. The Language control enables
you to set the TV’s on-screen menu to be shown in English,
Spanish, or French.
Picture Sound Features Channels
TV
Settings
Demo
TV
Settings
Demo
Language
IMPORTANT!: When you plug in your TV for the first
time it will prompt you to set the Language and
Autoprogam the channels.
Install
Install
If you are setting up the TV after turning it on for the first
time, skip steps 1-3. If you are returning to the Language
menu, use steps 1-3 below.
5
3
Language
Autoprogram
Language
Autoprogram
Press the MENU button on the remote control to show the
on-screen menu.
Press the cursor down to select
your menu language
OK
Select your menu language with
the cursor up/down.
Press the OK key on the remote
control to confirm.
English
English
Français
Español
1
Français
Español
Press the Cursor Down button repeatedly until “Install”
is selected.
2
1
6
2
Press the Cursor Right button to shift the menu to the left
and select “Language.”
4
3
Press the Cursor Down button to select English, Español
(Spanish), or Francais (French).
Language
Autoprogram
4
After you have made your language selection, press the
OK button to confirm your selection.
The language you have chosen is
English
English
Français
Español
5
Press the MENU button to remove the on-screen menu
from the TV screen.
6
HELPFUL HINT
Remember, the Language control makes only the TV’s on-
screen Menu items appear in English, Spanish, or French text.
It does not change the other on-screen text features, such as
Closed Captioning (CC), with TV shows.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Installation Features
Autoprogram
Your TV can automatically set itself for local area (or cable
TV) channels. This makes it easy for you to select only the
TV stations in your area by pressing the CH + or – button
on the remote control
Picture Sound Features Channels
TV
Settings
Demo
TV
Settings
Demo
3
5
9
Language
Install
Install
IMPORTANT! When you plug in your TV for the first
time it will prompt you to set the Language and
Autoprogam the channels.
If you are setting up the TV after turning it on for the first
time, skip steps 1-3. If you are returning to the
Autoprogrammenu , use steps 1-3 below..
6
7
Autoprogram
Autoprogram
Keep the prede-
fined automatic
detection of
cable or anntenna
or make your own
selection.
The TV will search for, find and store
all the available channels.
Press the cursor down to proceed.
Automatic
Install mode
Install
Install mode
Install
Press the MENU button on the remote control to show
the on-screen menu.
1
2
2
1
Press the Cursor Down button repeatedly until “Install”
is highlighted.
4
6
8
10
Autoprogram
Autoprogram
Press the Cursor Right button repeatedly to shift the
menu to the left and select “Autoprogram.”
Antenna
Automatic
Cable
Automatic
Install mode
Install
Install mode
Install
3
4
5
6
Press the Cursor Down button to select the “Install”
mode control.
Press the Cursor Right button to display a list of Install
mode options: “Antenna,” “Automatic,” “Cable.”
Autoprogram
Autoprogram
Press the Cursor Up or Down button to select one of the
options. Select “Antenna” for normal outside- or inside-
type antenna. Select “Cable” for a cable-company-sup-
plied signal. When “Automatic” is selected, the TV will
automatically set the mode based on the type of signal it
detects coming into the TV. The programming process
may be faster if you choose the specific type of connec-
tion you have made, either Antenna or Cable.
Install mode
Install
Install mode
Install
Start
Searching
24 analog channels found
To Autoprogram Analog channels, press the right arrow.
Autoprogram
Press the Cursor Left button after making your “Install”
mode selection.
Install mode
Install
Start
7
60 analog channels found
Autoprogramming is complete
Press the Cursor Down button to select “Install.”
8
Press the Cursor Right button to start the programming
process. After prograomming is finished, the set will go
to trhe first channel found.
9
Press the Menu button to remove the on-screen menu
from the TV screen when the Autoprogramming process
has finished.
10
HELPFUL HINT
After Autoprogram is finished, check the results. Press the CH
(+) or (–) button on the remote control to see which channels
you can select.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
USING AUTO INTELLISENSE™ TO ADJUST PICTURE CONVERGENCE
Your Philips television has three color picture tubes that are
aligned at the factory to properly bring the projected light beams
together on screen. Transporting or moving the TV, however, can
cause misalignment, which results in the appearance of color
fringes or haloes around images on screen. You can easily correct
this using the Auto IntelliSense™ feature. Allow the TV to warm
up for 20 minutes, then press the IntelliSense button on the front
of the TV. Within a few moments, picture convergence will be
adjusted.
INTELLISENSE FOCUS IN PROGRESS
You can also set Auto IntelliSense™ in motion through the
on-screen menu:
Picture Sound Features Channels
Press the MENU button on the remote control to show
the on-screen menu.
TV
Settings
Demo
1
2
3
4
TV
Settings
Demo
General Clock
Install
Press the Cursor Down button to select “Settings.”
Press the Cursor Right button to select “General.”
Install
Press the Cursor Down button repeatedly until
“IntelliSense” is selected.
Settings
IntelliSense
Manual Convergence
Press the OK button to activate Auto IntelliSense™. In a
few moments the picture will be converged.
5
5
HELPFUL HINT
3
1
If you would like, you can make additional convergence adjust-
ments to suit your personal preferences or to further fine-tune
the picture. To do this, use the Manual Convergence controls in
the Settings, General menu. See the Directions for Use manual
for details.
Settings
IntelliSense
Manual Convergence
2
4
INTELLISENSE FOCUS IN PROGRESS
8
Download from Www.Somanuals.com. All Manuals Search And Download.
|