Philips Portable DVD Player DVD951 User Manual

DVDVideo player  
DVD951  
Toll Free Help Line  
Ligne d'assistance en service libre  
Linea de ayuada telefónica sin cargo  
800-531-0039  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
English -------------------------------------------------------- 5  
Français------------------------------------------------------26  
Español ------------------------------------------------------48  
LASER SAFETY  
This unit employs a laser. Due to possible eye injury, only  
a qualified service person should remove the cover or  
attempt to service this device.  
USE OF CONTROLS OR ADJUSTMENTS OR  
PERFORMANCE OF PROCEDURES OTHER  
THAN THOSE SPECIFIED HEREIN MAY  
RESULT IN HAZARDOUS RADIATION  
EXPOSURE.  
1
The region code for this set is 1.  
Since it is usual for DVD movies to be released at  
different times in different regions of the world, all  
players have region codes and discs can have an optional  
region code. If you load a disc of a different region code  
to your player, you will see the region code notice on  
the screen.The disc will not play and should be  
unloaded.  
LASER  
Type  
Wave length  
Semiconductor laser GaAlAs  
650 nm (DVD)  
780 nm (VCD/CD)  
7 mW (DVD)  
Output Power  
10 mW (VCD/CD)  
60 degree  
Beam divergence  
NOTE:  
PICTURES SHOWN MAYBE DIFFERENT  
BETWEEN COUNTRIES.  
Manufactured under license from Dolby Laboratories.  
“Dolby” and the double-D symbol are trademarks of Dolby  
Laboratories. Confidential Unpublished Works. ©1992-  
1997 Dolby Laboratories, Inc. All rights reserved.  
NEVER MAKE OR CHANGE CONNECTIONS  
WITH THE POWER SWITCHED ON.  
CAUTION  
VISIBLE AND INVISIBLE LASER RADIATION  
WHEN OPEN AVOID EXPOSURE TO BEAM  
(WARNING LOCATION: INSIDE ON LASER  
COVERSHIELD OR THE BACKPLATE OF SET)  
This product incorporates copyright protection technology  
that is protected by method claims of certain U.S. patents  
and other intellectual property rights owned by Macrovision  
Corporation and other rights owners. Use of this copyright  
protection technology must be authorized by Macrovision  
Corporation, and is intended for home and other limited  
viewing uses only unless otherwise authorized by  
Macrovision Corporation. Reverse engineering or  
disassembly is prohibited.  
TruSurround and the SRS symbol are trademarks of SRS  
Labs., Inc.TruSurround technology is manufactured under  
license from SRS Labs., Inc.  
Manufactured under license from Digital Theater Systems,  
Inc. US Pat. No. 5,451,942 and other world-wide patents  
issued and pending. “DTS” and “DTS DIGITAL SURROUND”  
are trademarks of Digital Theater Systems, Inc. © 1996  
Digital Theater Systems, Inc. All rights reserved.  
For Customer Use:  
Read carefully the information located at the bottom of your DVD-VIDEO player and enter below the Serial No. Retain  
this information for future reference.  
Model No. DVD-VIDEO 951  
Serial No. __________________________  
3
INDEX  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Information  
WARNING  
To reduce the risk of fire or electric shock, do not expose  
this appliance to rain or moisture.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
CAUTION  
Use of controls or adjustments or performance of  
procedures other than herein may result in hazardous  
radiation exposure.  
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,  
DO NOT REMOVE COVER (OR BACK).  
NO USER-SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
This symbol warns the user that uninsulated voltage  
within the unit may have sufficient magnitude to cause  
electric shock. Therefore, it is dangerous to make  
any kind of contact with any inside part of this unit.  
The set complies with the FCC-Rules, Part 15 and with 21  
CFR 1040.10.  
This symbol alerts the user that important literature  
concerning the operation and maintenance of this  
unit has been included. Therefore, it should be read  
carefully in order to avoid any problems.  
Canada  
This digital apparatus does not exceed the Class B limits for  
radio noise emissions from digital apparatus as set out in  
the Radio Interference Regulations of the Canadian  
Department of Communications.  
AVISO  
AVIS  
Para reducir el riesgo de fuego o choque eléctrico, no  
exponga el aparato a la lluvia o humedad.  
RISQUE DE CHOCS ÉLECTRIQUES  
NE PAS OUVRIR  
Attention: Afin de prévenir le risque de chocs électriques,  
ne pas retirer les vis.  
Toute réparation devrait être confiée à un personnel qualifié.  
ATENCIÓN  
El uso de mando o ajustes o la ejecucción de métodos que  
no sean los aquí descritos puede ocasionar peligro de  
exposición a radiación.  
Ce symbole indique la présence d’une tension  
suffisamment élevée pour engendrer un risque de  
chocs électriques.  
Ce symbole indique que le manuel d’installation  
fourni avec l’appareil contient d’importantes  
recommandations quant au fonctionnement et  
à l’entretien de ce dernier.  
El aparato cumple las normas FCC, Parte 15 y 21 CFR  
1040.10.  
AVIS  
Afin de réduire tout risque d’incendie ou de choc  
électrique, il ne faut pas exposer cet appareil à la pluie ou à  
l’humidité.  
AVISO  
RIESGO DE CHOQUE ELÉCTRICO  
NO ABRIR  
ATTENTION  
L'utilisation des commandes ou réglages ou le non-respect  
des procédures ci-incluses peuvent se traduire par une  
exposition dangereuse à l'irradiation.  
Atención: Para reducir el riesgo de choque elécrico,  
no quite la tapa (o el panel posterior).  
En su interior no hay piezas que el usuario pueda reparar.  
Para servicio dirijase a personal calificado.  
Este símbolo tiene por finalidad advertir al usuario de  
la presencia de tensión peligrosa no aislada dentro de  
la caja del aparato, que puede ser lo suficientemente  
fuerte para constituir un peligro de choque eléctrico.  
L'appareil répond aux normes FCC, Part 15 et 21 CFR  
1040.10.  
Este símbolo sirve para advertir al usuario de la  
presencia de instrucciones de manejo y  
mantenimiento (servicio) importantes en el manual  
que acompaña al aparato.  
Canada  
Cet appareil numérique n'emet pas de bruits  
radioélectriques dépassant les limites applicables aux  
appareils numériques de Class B prescrites dans le  
Règlement sur le Brouillage Radioélectrique édicté par le  
Ministère des Communications du Canada.  
4
GENERAL INFORMATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Read before operating equipment  
This product was designed and manufactured to meet strict  
quality and safety standards.There are, however, some  
installation and operation precautions which you should be  
particularly aware of.  
9. Do not defeat the safety  
purpose of the polarized or  
grounding-type plug.A polarized plug  
has two blades with one wider than  
AC Polarized  
Plug  
the other.A grounding type plug has two blades and a third  
grounding prong.The wide blade or the third prong are  
provided for your safety.When the provided plug does not  
fit into your outlet, consult an electrician for replacement of  
the obsolete outlet.  
1. Read these instructions – All the safety and operating  
instructions should be read before the appliance is  
operated.  
2. Keep these instructions The safety and operating  
instructions should be retained for future reference.  
10.Protect the power cord from being walked on or  
pinched particularly at plugs, convenience receptacles, and  
the point where they exit from the apparatus.  
3. Heed all warnings – All warnings on the appliance and in  
the operating instructions should be adhered to.  
4. Follow all instructions – All operating and use  
11.Only use attachments/accessories specified by the  
instructions should be followed.  
manufacturer.  
5. Do not use this apparatus near water – for example,  
near a bathtub, washbowl, kitchen sink, laundry tub, in a wet  
basement or near a swimming pool, etc.  
12.  
Use only with a cart, stand, tripod, bracket,  
or table specified by the manufacturer, or sold  
with the apparatus.When a cart is used, use  
caution when moving the cart/apparatus  
combination to avoid injury from tip-over.  
6. Clean only with a damp cloth.The appliance should  
be cleaned only as recommended by the manufacturer.  
13.Unplug this apparatus during lightning storms or when  
7. Install in accordance with the manufacturers  
instructions. Do not block any of the ventilation  
openings. For example, the appliance should not be  
situated on a bed, sofa, rug, or similar surface or placed in a  
built-in installation, such as a bookcase or cabinet that may  
impede the flow of air through the ventilation openings.  
unused for long periods of time.  
14.Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has been  
damaged in any way, such as power-supply cord or plug is  
damaged, liquid has been spilled or objects have fallen into  
the apparatus, the apparatus has been exposed to rain or  
moisture, does not operate normally, or has been dropped.  
8. Do not install near any heat sources such as  
radiators, heat registers, stoves, or other apparatus  
(including amplifiers) that produce heat.  
15. Battery usage CAUTION To prevent battery leakage  
which may result in bodily injury or damage to the unit:  
G
G
Install all batteries correctly, + and - as marked on the unit.  
Do not mix batteries (old and new or carbon and  
alkaline, etc.).  
G
Remove batteries when the unit is not used for a long time.  
EL 6475-E001: 00/8  
5
IMPORTANT SAFETY INSTRUCTION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY  
DVDVIDEO PLAYER  
90 Days Free Labor  
OneYear Exchange Warranty on Parts  
This product must be carried in for repair.  
WHO IS COVERED?  
You must have proof of purchase to receive warranty service.A sales  
receipt or other document showing that you purchased the product is  
considered proof of purchase.  
MAKE SUREYOU KEEP...  
Please keep your sales receipt or other document showing proof of  
purchase.Attach it to this owner’s manual and keep both nearby.Also  
keep the original box and packing material in case you need to return  
your product.  
WHAT IS COVERED?  
Warranty coverage begins the day you buy your product. For 90 days  
thereafter, all parts will be repaired or replaced, and labor is free. From  
BEFORE REQUESTING SERVICE...  
Please check your owner’s manual before requesting service.  
90 days to one year from the day of purchase, all parts will be repaired or Adjustments of the controls discussed there may save you a service  
replaced, but you pay for all labor charges. After one year from the day  
of purchase, you pay for the replacement or repair of all parts, and for  
all labor charges.  
call.  
TO GET WARRANTY SERVICE IN U.S.A.,  
All parts, including repaired and replaced parts, are covered only for  
the original warranty period.When the warranty on the product  
expires, the warranty on all replaced and repaired parts also expires.  
PUERTO RICO OR U.S. VIRGIN ISLANDS...  
Take the product to a Philips factory service center (see enclosed list)  
or authorized service center for repair.When the product has been  
repaired, you must pick up the unit at the center. Centers may keep  
defective parts.  
WHAT IS EXCLUDED?  
Your warranty does not cover:  
(In U.S.A., Puerto Rico and U.S.Virgin Islands, all implied warranties,  
including implied warranties of merchantability and fitness for a particu-  
lar purpose, are limited in duration to the duration of this express war-  
ranty. Because some states do not allow limitations on how long an  
implied warranty may last, this limitation may not apply to you.)  
labor charges for installation or setup of the product, adjustment of  
customer controls on the product, and installation or repair of  
antenna systems outside of the product.  
product repair and/or part replacement because of misuse, accident,  
unauthorized repair or other cause not within the control of Philips  
Consumer Electronics.  
TO GET WARRANTY SERVICE IN CANADA...  
Please contact Philips at:  
reception problems caused by signal conditions or cable or antenna  
systems outside the unit.  
a product that requires modification or adaptation to enable it to  
operate in any country other than the country for which it was  
designed, manufactured, approved and/or authorized, or repair of  
products damaged by these modifications.  
1-800-661-6162 (French Speaking)  
1-800-363-7278 (English Speaking)  
(In Canada, this warranty is given in lieu of all other warranties. No  
other warranties are expressed or implied, including any implied war-  
ranties of merchantability or fitness for a particular purpose. Philips is  
not liable under any circumstances for any direct, indirect, special, inci-  
dental or consequential damages, howsoever incurred, even if notified  
of the possibility of such damages.)  
incidental or consequential damages resulting from the product.  
(Some states do not allow the exclusion of incidental or consequen-  
tial damages, so the above exclusion may not apply to you.This  
includes, but is not limited to, prerecorded material, whether copy-  
righted or not copyrighted.)  
a product that is used for commercial or institutional purposes  
(including but not limited to rental purposes).  
REMEMBER...  
WHERE IS SERVICE AVAILABLE?  
Please record the model and serial numbers found on the product  
below.Also, please fill out and mail your warranty registration card  
promptly. It will be easier for us to notify you if necessary.  
MODEL # ___________________________________________  
SERIAL # ___________________________________________  
Warranty service is available in all countries where the product is offi-  
cially distributed by Philips Consumer Electronics. In countries where  
Philips Consumer Electronics does not distribute the product, the local  
Philips service organization will attempt to provide service (although  
there may be a delay if the appropriate spare parts and technical manu-  
al(s) are not readily available).  
This warranty gives you specific legal rights.You may have other rights which vary from state/province to state/province.  
Philips Service Solutions Group, P.O. Box 2976, Longview,Texas 75606, (903) 242-4800  
EL6191E003 / MAC 6058 / 12-98  
6
LIMITED WARRANTY  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Introduction  
Philips DVD-Video Introduction ------------------------- 8  
Unpacking ---------------------------------------------------- 8  
Remote Control battery installation-------------------- 8  
Safety Information ------------------------------------------ 8  
Cleaning Discs ---------------------------------------------- 8  
Functional overview  
Front panel and Display ----------------------------------- 9  
Remote control --------------------------------------------10  
Rear panel --------------------------------------------------11  
Preparation  
General notes ----------------------------------------------12  
Connecting to aTV ---------------------------------------12  
Connecting to optional equipment-----------------12-13  
NTSC/PAL Settings----------------------------------------13  
General explanation --------------------------------------13  
Menu bar/Status window---------------------------------14  
Temporary feedback field icons -------------------------14  
Personal Preferences----------------------------------14-15  
Operation  
Loading discs -----------------------------------------------16  
Playing a DVD-Video andVideo CD disc--------------16  
General Features --------------------------------------16-18  
Special DVD features -------------------------------------19  
SpecialVCD features--------------------------------------19  
Playing an Audio CD ----------------------------------19-20  
FTS Program -----------------------------------------------20  
Access Control  
Access Control: child lock -------------------------------21  
Access Control: parental control -------------------21-22  
Before requesting service  
Before requesting service --------------------------------23  
Appendix  
Speaker Settings ----------------------------------------- 24  
Specifications  
Specifications -----------------------------------------------25  
7
CONTENTS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Philips DVD-Video  
Introduction  
Remote control battery  
installation  
Your Philips DVD-Video player will play digital video discs  
conforming to the universal DVD-Video standard.With it,  
you will be able to enjoy full-length movies with true  
cinema picture quality, as well as stereo or multi-channel  
sound (depending on the disc and your playback setup).  
The unique features of DVD-Video, such as selection of  
sound track, subtitle languages and different camera angles  
(again depending on the disc), are all included.  
Insert batteries as indicated inside the battery  
compartment.  
Caution: Do not mix old and new batteries. Never  
mix different types of batteries (standard, alkaline,  
etc.).  
In addition to DVD-Video discs, you will be able to play all  
Video CDs and Audio CDs (including finalized CD  
Recordable and CD Rewritable).  
DVD-Video  
You will recognize DVD-Video discs by the logo shown.  
Depending on the material on the disc (a movie, video clips,  
a drama series, etc.) the disc may have one or moreTitles.  
Safety Information  
Do not expose the system to excessive moisture, rain, sand,  
or heat sources.  
DVD-VIDEO DISC  
TITLE 1  
TITLE 2  
Place the player on a firm, flat surface.  
Keep the player away from domestic heating equipment  
and direct sunlight.  
CHAPTER 1 CHAPTER 2 CHAPTER 1 CHAPTER 2  
CHAPTER 3  
In a cabinet, allow about 2.5 cm (1 inch) of free space all  
around the player for adequate ventilation.  
If the DVD-Video player cannot read CDs/DVDs correctly,  
use a commonly available cleaning CD/DVD to clean the  
lens before taking the DVD-Video player to be repaired.  
Other cleaning methods may destroy the lens.Always keep  
the tray closed to avoid dust on the lens.  
Video CD  
You will recognizeVideo CDs by the logo  
shown.  
The lens may cloud over when the DVD-Video player is  
suddenly moved from cold to warm surroundings. Playing a  
CD/DVD is not possible then. Leave the power on for  
about one hour with no disc in the unit until normal  
playback is possible.  
Audio CD  
Audio CDs contain music tracks only.  
You will recognize Audio CDs by the logo  
shown.  
Cleaning discs  
Unpacking  
When a disc becomes dirty, clean it with a cleaning cloth.  
Wipe the disc from the center out.  
Do not use solvents such as benzine, thinner, commercially  
available cleaners, or anti-static spray intended for analog  
discs.  
First check and identify the contents of your DVD-Video  
player package.  
You should have the following items.  
– DVD-Video player  
– Remote Control with batteries  
– AC power cord  
– Audio cable  
– Video cable  
– Instructions for use  
If any item is damaged or missing, contact your retailer or  
Philips.  
Keep the packaging material; for future transportation.  
8
INTRODUCTION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functional Overview  
Front panel and Display  
POWER ON/OFF  
– switches the player to ON or OFF  
SOUND  
– select Stereo, Dolby Surround, 3D Sound  
(TruSurround) or multi-channel  
STANDBY INDICATOR  
– lights red when the player is in Standby  
mode  
ST EASY JOG  
– controls Fast Forward/Rewind/Previous/  
Next and Slow motion in various steps  
DISPLAY  
– shows the current status of the player  
9 STOP  
– stops video/audio playback  
2; PLAY/PAUSE  
– starts or interrupts playback  
DVD951 DVD/VIDEO CD/CD PLAYER  
POWER ON/OFF  
PLAY/PAUSE  
STOP  
SOUND  
TITLE CHAPTER TRACK  
TOTAL TRACK TIME  
SCAN  
A
-B REPEAT SHUFFLE CHAPTER TITLE TRACK  
VCD  
OPEN/CLOSE  
HEADPHONE LEVEL  
EASY JOG  
MIN  
MAX  
LEVEL  
DISC TRAY  
– headphone volume control  
/ OPEN/CLOSE  
HEADPHONE  
– opens/closes the disc tray  
– for connecting headphones  
TITLE CHAPTER TRACK  
SCAN  
SHUFFLE  
TOTAL TRACK TIME  
A
-B REPEAT  
CHAPTER TITLE TRACK  
VCD  
DVD inserted  
Remote control active (flashing)  
FTS active  
Video CD or Audio CD inserted  
VCD  
SCAN  
SCAN active  
Indicates current player function:  
Playback, Pause, Search, etc.  
A-B REPEAT  
REPEAT A-B active  
SHUFFLE active SHUFFLE  
Front (left and right) and Center  
speakers active  
Test tone active  
Active audio format  
Surround (left and right) and  
Subwoofer speakers active  
9
FUNCTIONAL OVERVIEW  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote control  
DVD ON/OFF  
– switches DVD to ON/OFF mode  
TV ON/OFF  
– switches TV to ON/OFF mode  
DVD  
TV  
2
2
0-9 numerical key pad  
– direct numerical inputs  
TV VOL (+/)  
– to turn TV volume up/down  
ON/OFF  
ON/OFF  
PBC  
ON/OFF  
DISC / LOCK  
+
TV VOL  
-
+
TV P  
-
RESUME  
PBC (ON/OFF)  
FTS  
– activate/deactivate PBC  
RETURN  
– go back to previous menu  
FTS  
– activate FTS  
1
4
2
5
8
3
6
9
OK  
DISC LOCK ( Ç )  
– to activate/deactivate an  
authorized disc  
– acknowledge menu selection  
7
DISC  
SYSTEM  
MENU  
MENU  
0
RESUME  
Q O  
– to continue playback from  
STOP/PAUSE mode  
– search backward* / go to  
previous chapter or track  
RETURN  
OK  
TV P (+/)  
– to turn TV program up/down  
;
É
É
– pause playback temporarily /  
frame-by-frame playback  
STOP  
PLAY  
Ç
É
R P  
– search forward* / go to next  
chapter or track  
DISC MENU  
– access menu of a DVD disc  
Å
á
á
í
ë
SUBTITLE ANGLE TTL/CHAP AUDIO  
T-C  
SYSTEM MENU  
i
– access or remove player’s menu  
REPEAT REPEAT SHUFFLE SCAN  
A-B  
REPEAT  
– repeat chapter, track, title, disc  
SLOW  
BIT  
TIME  
ZOOM  
1 2 3 4  
– (left/right/up/down) cursor  
movement for selection  
Ö
REPEAT (A-B)  
– repeat sequence  
RATE SEARCH  
SHUFFLE  
– play tracks in random order  
STOP ( 9 )  
– to stop playback  
SCAN  
PLAY ( 2 )  
– to start playback  
– play of the first 10 seconds of  
each track/chapter within a disc  
SUBTITLE ( Z )  
– subtitle language selector  
SLOW ( x )  
– slow motion  
ANGLE ( } )  
– select DVD camera angle  
BIT RATE  
– displays bit rate indicator during  
playback  
TTL/CHAP (T-C)  
– select title/chapter  
TIME SEARCH  
– start playback at a specific time  
AUDIO ( Y )  
– audio language selector  
ZOOM ( a )  
– enlarge video image  
* Press and hold key for about 2 seconds  
10  
FUNCTIONAL OVERVIEW  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rear panel  
MAINS (AC)  
– connect to power source  
OPTICAL (Digital audio out jack)  
– connect to digital (optical) equipment  
COAXIAL (Digital audio out jack)  
– connect to digital (coaxial) equipment  
Y CB CR  
– connect to TV with Y CB CR inputs  
S-VIDEO OUT (Y/C)  
– connect to TV with S-Video (Y/C) inputs  
VIDEO OUT (CVBS)  
– connect to TV with CVBS video inputs  
SURROUND  
FRONT  
CENTER  
DIGITAL AUDIO OUT  
PCM/MPEG2/AC-3/DTS  
L
1
2
L
L
R
R
R
MAINS  
CVBS  
S-VIDEO  
CR  
Y
CB  
SURROUND  
FRONT  
SUB WF  
OPTICAL  
COAXIAL  
AUDIO OUT  
MULTICHANNEL AUDIO OUT  
VIDEO OUT  
MULTICHANNEL AUDIO OUT  
(For connection to a multichannel receiver)  
– center speaker connection  
– subwoofer connection  
– front speakers connections  
– surround speakers connections  
AUDIO OUT (Left/Right)  
– connect to amplifier, receiver or stereo system  
Caution: Do not touch the inner pins of the jacks  
on the rear panel. Electrostatic discharge may  
cause permanent damage to the unit.  
11  
FUNCTIONAL OVERVIEW  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation  
General notes  
Connecting to optional  
equipment  
Depending on yourTV and other equipment you wish to  
connect, there are various ways you could connect the  
player.  
Please refer to the manuals of yourTV,VCR, Stereo System  
or other devices as necessary to make the best  
connections.  
Connecting to an amplifier equipped with  
two channel analog stereo or Dolby  
Surround  
1 Connect the Left and Right audio out jacks of the DVD  
player to the audio left and right in jacks on your amplifier,  
receiver or stereo system, using the optional audio cable  
(A).  
For better sound reproduction, connect the player’s audio  
out jacks to the audio in jacks of your amplifier, receiver,  
stereo or audio/video equipment. See ‘Connecting to  
optional equipment’.  
Caution:  
Connecting to an amplifier equipped with  
two channel digital stereo (PCM) or to an  
Audio/Video receiver equipped with a  
multi-channel decoder (Dolby Digital,  
MPEG 2 and DTS)  
Do not connect the players audio out jack to  
the phono in jack of your audio system.  
Do not connect your DVD-player via yourVCR.  
The DVD image could be distorted by the copy  
protection system.  
1 Connect the player’s digital audio out jack (optical G or  
coaxial F) to the corresponding in jack on your amplifier.  
Use an optional digital (optical G or coaxial F) audio cable.  
Connecting to a TV  
2 You will need to activate the player’s digital output (see  
ComponentVideo (Y CB CR) connection  
‘Personal Preferences’).  
1
Connect theY, CB, CR out jacks on the DVD-player to the  
corresponding in jacks on theTV using optionalY, CB, CR cable (Z).  
Digital Multi-channel sound  
The digital multi-channel connection provides the best  
sound quality. For this you need a multi-channel A/V  
receiver that supports one or more of the audio formats  
supported by your DVD player (MPEG 2, Dolby Digital™  
and DTS). Check the receiver manual and the logos on the  
front of the receiver.  
2 Connect the Left and Right audio out jacks to the audio  
left/right in jacks on theTV (A).  
S-Video (Y/C) connection  
1 Connect the S-Video out jack on the DVD-player to the S-  
Video in jack on theTV using an optional S-Video cable (Y).  
2 Connect the Left and Right audio out jacks to the audio  
left/right in jacks on theTV (A).  
AMPLIFIER  
TV  
Video CVBS connection  
1 Connect theVideo out (CVBS) jack on the player to the  
video in jack on theTV using the video cable supplied (X).  
2 Connect the Left and Right audio out jacks to the audio  
left/right in jacks on theTV (A).  
G
F
A
X
Y
Z
TV  
SURROUND CENTER  
FRONT  
DIGITAL AUDIO OUT  
PCM/MPEG2/AC3/DTS  
L
1
2
L
L
R
R
R
MAINS  
CVBS  
S-VIDEO  
CR  
Y
CB  
SURROUND SUB WF  
FRONT  
OPTICAL  
COAXIAL  
AUDIO OUT  
MULTICHANNEL AUDIO OUT  
VIDEO OUT  
Warning:  
Due to DTS Licencing agreement, the digital  
output will also be in DTS digital out when DTS  
audio stream is selected.  
Z
A
X
Y
SURROUND CENTER  
FRONT  
DIGITAL AUDIO OUT  
PCM/MPEG2/AC3/DTS  
L
1
2
L
L
R
R
R
MAINS  
CVBS  
S-VIDEO  
CR  
Y
CB  
SURROUND SUB WF  
FRONT  
OPTICAL  
COAXIAL  
AUDIO OUT  
MULTICHANNEL AUDIO OUT  
VIDEO OUT  
12  
PREPARATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note:  
NTSC/PAL Settings  
If the audio format of the digital output does not match the  
capabilities of your receiver, the receiver will produce a strong,  
distorted sound or no sound at all.  
The selected audio format of the DVD is displayed in the  
StatusWindow when the SYSTEM MENU is activated or when  
the Audio button is pressed.  
Six Channel Digital Surround Sound via digital connection  
can only be obtained if your receiver is equipped with a Digital  
Multi-channel decoder.  
To see the selected audio format of the current DVD in the  
StatusWindow, press the SYSTEM MENU or the Audio  
Language selector button.  
You can switch the NTSC/PAL setting of the DVD player to  
match the video signal of yourTV.This setting only affects  
the television’s on-screen display that shows the stop and  
setup modes.You may select either NTSC or PAL.To  
change the DVD player setting to PAL or NTSC, follow the  
steps below.  
1 Press the POWER ON/OFF button on the front panel of  
the DVD player to turn OFF the DVD player.  
2 Press and hold 9and SOUND, on the front of the DVD  
player.While holding 9and SOUND, press POWER ON/  
OFF.  
Analog connection to a multi-channel A/V  
receiver with 6 Channel connectors (Dolby  
Digital / DTS)  
3 After PAL or NTSC appears on the display panel of the  
DVD player, release 9and SOUND, at the same time.  
The PAL or NTSC indicator that appears on the display  
panel indicates the current setting.  
4 To change the setting, press SOUND, within three  
seconds.The new setting (PAL or NTSC) will appear on the  
display panel.  
This DVD player contains a multi-channel decoder.This  
enables playback of DVDs recorded in Multi-channel  
Surround without the need for an optional decoder.  
1 Connect the audio out jacks for the Center speaker and  
the Subwoofer connection (C) to the corresponding in  
jacks on your receiver.  
2 Connect the Left and Right audio out jacks for the Front  
speaker (B) to the corresponding in jack on your receiver.  
3 Connect the Left and Right audio out jacks for Surround  
speaker (D) to the corresponding in jacks on your receiver.  
4 Make the appropriate Sound settings for Analog Output  
and Speaker Settings in the Personal Preferences menu.  
General explanation  
About this manual  
This manual gives the basic instructions for operating the  
DVD player. Some DVDs require specific operation or  
allow only limited operation during playback.When this  
occurs, the symbol Ä appears on theTV screen, indicating  
that the operation is not permitted by the player or the  
disc.  
AMPLIFIER  
Remote control operation  
TV  
Unless stated, all operations can be carried out with the  
remote control.Always point the remote control directly at  
the player, making sure there are no obstructions between  
the remote and the player.  
Corresponding keys on the front panel of the player can  
also be used.  
C
B
D
X
Y
Z
Menu bar operation  
SURROUND CENTER  
FRONT  
DIGITAL AUDIO OUT  
PCM/MPEG2/AC3/DTS  
L
1
2
L
L
A number of operations can be carried out via the menu  
bar on the screen.The menu bar can be accessed by  
pressing the cursor keys on the remote control.  
Pressing SYSTEM MENU while the menu bar is displayed  
will clear the menu bar from the screen.  
The selected item will be highlighted and the appropriate  
cursor keys to operate will be displayed below the icon.  
The symbols < or > indicates that more items are available  
at the left/right of the menu bar. Press tor uto select  
these items.  
R
R
R
MAINS  
CVBS  
S-VIDEO  
CR  
Y
CB  
SURROUND SUB WF  
FRONT  
OPTICAL  
COAXIAL  
AUDIO OUT  
MULTICHANNEL AUDIO OUT  
VIDEO OUT  
13  
PREPARATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu bar/Status window  
Personal Preferences  
V
W
X
Y
Z
}
Personal Preferences  
Title/Track  
Chapter/Index  
Audio language  
Subtitle language  
Angle  
You can set your own personal preferences on the player.  
General operation:  
Press SYSTEM MENU on the remote control.  
Select V in the menu bar.  
GThe Personal Preferences menu appears.  
Use the tuwvkeys to move through the menus,  
submenus and submenu options.  
G When a menu item is selected, the cursor keys (on the  
remote control) needed to operate the item are displayed  
next to the item.  
a
b
c
d
Zoom  
Color Settings (Smart Picture)  
Video Program  
Sound  
e Picture by Picture  
Slow motion  
g Fast motion  
Time search  
f
Press OK to confirm your selection and return to the main  
menu.  
h
The following items can be adapted:  
Picture  
TV Shape  
If you have a wide screen (16:9)TV, select 16:9.  
If you have a regular (4:3)TV, select 4:3.  
If you have a 4:3TV, you can also select between:  
Letterbox for a ‘wide-screen’ picture with black bars at the  
top and bottom of the screen, or Pan Scan, for a full-height  
picture with the sides trimmed. If a disc supports the  
format, the picture will be shown accordingly.  
Temporary Feedback Field  
icons  
Black level shift (NTSC users only)  
Scan  
Select ON for adapting the color dynamics to obtain richer  
contrasts.  
Repeat All  
RepeatTitle  
RepeatTrack  
Repeat Chapter  
Shuffle  
Shuffle Repeat  
Repeat A to end  
Repeat A-B  
Angle  
Video shift  
The factory centers the video on your screen. Use this  
setting to personalize the position of the picture on your  
TV by moving it to the left or right.  
Child Lock On  
Child Safe  
Resume  
Action prohibited  
14  
PREPARATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Color settings (Y CB CR connection only)  
You can select one of five predefined sets of color settings  
or define one set (Personal) yourself.  
Karaoke vocal  
Personal color (Y CB CR connection only)  
Put this setting to ON only when a multi-channel karaoke  
DVD is being played.The karaoke channels on the disc will  
then be mixed into a normal stereo sound.  
Allows you to fine-tune saturation, brightness and contrast  
of the selected color settings.  
Language  
Sound  
Select the required Menu,Audio and Subtitle language.  
Audio language and Subtitle language can also be adapted  
using the Menu bar.  
Digital output  
Factory setting:ALL.This means that both coaxial and  
optical outputs are on. If you are not connecting equipment  
with a digital input, change the setting to OFF.  
If your equipment doesn't include a digital multi-channel  
decoder, set the digital output to PCM (Pulse Code  
Modulation).  
Features  
Access Control  
Access Control contains the following features:  
Child Lock - When Child Lock is set to ON, a 4-digit code  
must be entered in order to play discs.  
Parental control - Allows the conditional viewing of DVDs  
containing Parental Control information (see ‘Access  
Control’).  
All  
StatusWindow  
Displays the current status of the player and is displayed  
with the menu bar. When disc playback is stopped, it is  
displayed with the ‘Temporary Feedback Field’ in the default  
screen. See ‘On-Screen Display’ information.  
The factory setting is ON. Select OFF to suppress display of  
the Status Window.  
Analog output  
Select Stereo, Dolby Surround, 3D Sound (TruSurround) or  
multi-channel output to match your system’s playback  
capability.  
Bit Rate Indicator  
When activated, the bit rate for video and audio as well as  
the total bit rate is displayed.This is only applicable during  
playback of DVD and SVCD discs.  
Night Mode  
Optimizes the dynamics of the sound for low volume  
playback.  
Speaker settings  
Allows you to select speaker settings including volume  
balance and delay time and to test the speaker settings.  
Speaker settings are only active on the Analog Multi-  
Channel Output. (See appendix)  
Beeper  
The beeper can be set to ON or OFF.  
15  
PREPARATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Loading discs  
General features  
Note:  
1 Press OPEN/CLOSE on the front of the player to open the  
disc tray.  
Unless stated, all operations described are based on remote  
control use. Some operations can be carried out using the  
menu bar on the screen.  
2 Load your chosen disc in the tray, label side up (also when a  
double sided DVD is inserted).  
3 Press OPEN/CLOSE again to close the tray.  
G READ appears in the status window and on the player  
display, and playback starts automatically.  
Moving to another TITLE/TRACK  
Ç
É
When a disc has more than one title or  
Å
á
á
í
ë
track, you can move to another title as  
follows:  
Note:  
SUBTITLE ANGLE TTL/CHAP AUDIO  
T-C  
i
If Child Lockis set to ON and the disc inserted is not in  
the child safelist (not authorized), the 4-digit code must be  
entered and/or the disc must be authorized (see Access  
Control).  
REPEAT REPEAT SHUFFLE SCAN  
A-B  
PressT-C (TTL/CHAP), then press P  
or Obriefly during playback to select the next or to return  
to the beginning of the current title/track.  
Press Otwice briefly to step back to the previous title/  
track.  
Playing a DVD and Video CD  
disc  
Moving to another CHAPTER/INDEX  
Ç
É
When a title on a disc has more than one  
chapter or a track has more than one  
index , you can move to another chapter/  
index as follows:  
Å
á
á
í
ë
Playing a disc  
SUBTITLE ANGLE TTL/CHAP AUDIO  
i
T-C  
REPEAT REPEAT SHUFFLE SCAN  
A-B  
After inserting the disc and closing the tray, playback starts  
automatically and the status window of the player display  
shows the type of disc loaded, as well as the disc’s  
information and playing time.  
The disc may invite you to select an item from a menu. If  
the selections are numbered, press the appropriate  
numerical key; if not, use the w/v, t/ukeys to highlight  
your selection, then press OK.  
Press Por Obriefly during playback to select the next or  
to return to the beginning of the current chapter/index.  
Press Otwice briefly to step back to the previous chapter/  
index.  
To go directly to any chapter or index, selectT-C (TTL/  
CHAP), then enter the chapter/index number using the  
numerical keys (0-9).  
The number if the current title and chapter are displayed.  
Playback may stop at the end of theTitle, and you may  
return to the DVD menu.To go to the next title, press 2.  
To stop playback, press 9.  
GThe default screen will appear, giving information about  
the current status.  
You can resume playback from the point at which you  
stopped playback. Press 2; when you see the Resume icon  
.on the screen, press 2again.  
Note:  
For two digit numbers, press the keys in rapid succession.  
Slow Motion  
á
á
í
ë
SUBTITLE ANGLE TTL/CHAP AUDIO  
T-C  
i
Select f (SLOW MOTION) in the  
menu bar.  
Use the wkeys to enter the SLOW  
MOTION menu.  
REPEAT REPEAT SHUFFLE SCAN  
A-B  
SLOW  
BIT  
TIME  
ZOOM  
Ö
RATE SEARCH  
GThe RESUME feature applies not only to the disc in the  
player, but also to the last four discs you have played. Simply  
reload the disc and press RESUME on the remote control  
or; press 2when you see the Resume icon .on the  
screen, press 2again.  
GThe player will now go into PAUSE mode.  
Use the cursor keys tuto select the required speed: -1, -  
1/2, -1/4 or -1/8 (backward), or +1/8, +1/4, +1/2 or +1  
(forward).  
Select 1 to playback at normal speed again.  
If ;is pressed, the speed will be set to zero (PAUSE).  
To exit slow motion mode, press 2and v.  
Note:  
DVDs may be labeled with a region code.  
Your player will not play discs that are labeled with a region  
code different from your player.  
You can also select Slow Motion speeds by using the H  
button on the remote control.  
16  
OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
á
á
í
ë
Still Picture and Frame-by-frame playback  
Repeat A-B  
SUBTITLE ANGLE TTL/CHAP AUDIO  
T-C  
i
REPEAT REPEAT SHUFFLE SCAN  
A-B  
Select e (PICTURE BY PICTURE)  
in the menu bar.  
Use the wkey to enter the picture by  
picture menu.  
GThe player will now go into PAUSE mode.  
To repeat a sequence in a title:  
Press REPEAT A-B at your chosen starting  
point.  
É
É
SLOW  
BIT  
TIME  
ZOOM  
STOP  
PLAY  
Ö
RATE SEARCH  
Ç
É
Å
á
á
í
ë
G A- appears briefly on the screen.  
Press REPEAT A-B again at your chosen end point.  
Use the cursor keys tuto select the previous or next  
picture frame.  
To exit PICTURE BY PICTURE mode, press 2or v.  
G A-B REPEAT appears briefly on the display, and the repeat  
sequence begins(A-B REPEAT is displayed on the front panel  
of the player).  
To exit the sequence, press REPEAT A-B.  
You can also step forward by pressing ;repeatedly on the  
remote control.  
Å
á
á
í
ë
Shuffle  
SUBTITLE ANGLE TTL/CHAP AUDIO  
T-C  
i
REPEAT REPEAT SHUFFLE SCAN  
A-B  
Scan  
á
á
í
ë
DVD-Video discs  
SLOW  
BIT  
TIME  
ZOOM  
SUBTITLE ANGLE TTL/CHAP AUDIO  
T-C  
This shuffles the playing order of chapters  
within a title, if the title has more than  
one chapter.  
i
Ö
Plays the first 10 seconds of each  
chapter/tracks on the disc.  
Press SCAN.  
To continue playback at your chosen chapter/tracks, press  
SCAN again or press 2.  
RATE SEARCH  
REPEAT REPEAT SHUFFLE SCAN  
A-B  
SLOW  
BIT  
TIME  
ZOOM  
Ö
RATE SEARCH  
Press SHUFFLE during playback.  
G SHUFFLE appears on the screen for about two  
seconds.  
To return to normal playback, press SHUFFLE again.  
Search  
Å
Video CDs  
á
á
í
ë
Select g (FAST MOTION) in the  
menu bar.  
Use the wkey to enter the FAST  
MOTION menu.  
Use the tukeys to select the required speed: -32, -8 or -4  
(backward), or +4, +8, +32 (forward).  
Select 1 to play at normal speed again.  
Press SHUFFLE during playback.  
G SHUFFLE appears on the screen for about two  
seconds.  
SUBTITLE ANGLE TTL/CHAP AUDIO  
T-C  
i
REPEAT REPEAT SHUFFLE SCAN  
A-B  
SLOW  
BIT  
TIME  
ZOOM  
Ö
RATE SEARCH  
To return to normal playback, press SHUFFLE again.  
Å
Time search  
á
á
í
ë
SUBTITLE ANGLE TTL/CHAP AUDIO  
T-C  
To exit FAST MOTION mode, press 2or v.  
i
TheTime Search function allows you to  
start playing at any chosen time on the  
disc.  
REPEAT REPEAT SHUFFLE SCAN  
A-B  
To search forward or backward through different speeds,  
you can also hold down Qor R.  
SLOW  
BIT  
TIME  
ZOOM  
Ö
RATE SEARCH  
Select h (TIME SEARCH) in the menu bar.  
Press w.  
GThe player will now go into PAUSE mode.  
G A time edit box appears on the screen, showing the  
elapsed playing time of the current disc.  
Use the numerical keys to enter the required start time.  
Enter hours, minutes and seconds from left to right in the  
box.  
Å
Repeat  
á
á
í
ë
SUBTITLE ANGLE TTL/CHAP AUDIO  
T-C  
i
DVD-Video Discs - Repeat chapter/  
title/disc  
To repeat the currently playing chapter,  
press REPEAT.  
REPEAT REPEAT SHUFFLE SCAN  
A-B  
SLOW  
BIT  
TIME  
ZOOM  
Ö
RATE SEARCH  
G REPEAT CHAPTER appears on the display.  
To repeat the title currently playing , press REPEAT a  
second time.  
G Each time an item has been entered, the next item will  
be highlighted.  
G REPEAT TITLE appears on the display.  
To repeat the entire disc, press REPEAT a third time.  
G REPEAT appears on the display.  
Press OK to confirm the start time.  
GThe time edit box will disappear and playback starts  
from the selected time on the disc.  
To exit Repeat mode, press REPEAT a fourth time.  
Video CDs - Repeat track/disc  
To repeat the track currently playing , press REPEAT.  
G REPEAT TRACK appears on the display.  
To repeat the entire disc, press REPEAT a second time.  
G REPEAT appears on display and screen.  
To exit Repeat mode, press REPEAT a third time.  
17  
OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Å
á
á
í
ë
Zoom  
FTS-Video  
SUBTITLE ANGLE TTL/CHAP AUDIO  
T-C  
i
REPEAT REPEAT SHUFFLE SCAN  
A-B  
The Zoom function allows you to enlarge  
the video image and to move through  
the enlarged image.  
The FTS-Video function allows you to store your favorite  
titles and chapters (DVD) and favorite tracks and indexes  
(VCD) for a particular disc in the player memory.  
FTS program can contain 20 items (titles, chapters).  
A programmed FTS will be placed on top of the list when  
playback is activated.When the list is full, a new program  
will replace the last program on the list.  
SLOW  
BIT  
TIME  
ZOOM  
Ö
RATE SEARCH  
Select a (ZOOM).  
Press w/vto activate the ZOOM function and select the  
required zoom factor: 1.33, 2 or 4.  
GThe player will go into Pause mode.  
GThe selected zoom factor appears below the Zoom icon  
in the menu bar and ‘Press OK to pan’ appears below the  
menu bar.  
The selections can be chosen and played at any time.  
Storing a FTS-Video Program  
GThe picture will change accordingly.  
Press OK to confirm the selection.  
GThe panning icons appear on the screen.  
Use the tuwvkeys to move across the screen.  
When OK is pressed, only the zoomed picture will be  
shown on the screen.  
When playback is stop, select VIDEO FTS c in the menu  
bar.  
Press wto open the menu.  
GThe VIDEO FTS menu appears.  
Press uor tor FTS to select ON or OFF.  
To exit ZOOM mode:  
– Press 2 to resume playback, STOP or SYSTEM  
MENU.  
Storing titles/tracks  
Press wto select TITLES.  
Use uand tto select the required title.  
Press OK if you wish to store the entire title.  
GThe title number will be added to the list of selections.  
Easy Jog  
EASY JOG consists of JOG and SHUTTLE control  
which allows you to playback in various steps:  
Storing chapters/indexes  
In playback mode - search forward/backward within a  
chapter/index or move to the next/previous chapter/index.  
G SHUTTLE control: +4x, +8x, +32x, Next (clockwise  
direction), -4x, -8x, -32x, Previous (anti-clockwise direction).  
In pause mode - change playback speed or select next/  
previous frame-by-frame picture.  
G SHUTTLE control: +1/8x, +1/4x, +1/2x, (clockwise  
direction), -1/8x, -1/4x, -1/2x, (anti-clockwise direction).  
G JOG control: to select Next Picture Frame (clockwise  
direction), or Previous Picture Frame (anti-clockwise  
direction).  
Press won the selected title number.  
GThe title number will be marked and the highlight moves  
to the first available chapter number for this title.  
Use uand tto select the required chapter.  
Press OK to confirm the selection.  
GThe title/chapter selection will be added to the list of  
selections.  
Press SYSTEM MENU to exit the VIDEO FTS c menu.  
Erasing a FTS-Video Program  
When playback is stop, select VIDEO FTS c in the menu  
bar.  
PLAY/PAUSE STOP  
SOUND  
Use wto select PROGRAM.  
Use uand tto select the required number.  
Press OK to erase the selection.  
Press SYSTEM MENU to exit.  
JOG  
SHUTTLE  
OPEN/CLOSE  
EASY JOG  
If you wish to erase all selections:  
When playback is stop, select VIDEO FTS c in the menu  
bar.  
Use wto select CLEAR ALL.  
Press OK.  
G All selections will now be erased.  
Press SYSTEM MENU to exit.  
18  
OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Special DVD features  
Special VCD Features  
Checking the contents of DVD-Video discs:  
Menus  
Playback Control (PBC)  
Load aVideo CD with PBC and press 2.  
Go through the menu with the keys indicated on theTV  
screen until your chosen passage starts to play. If a PBC  
menu includes titles, you can select a title directly.  
Enter your choice with the numerical keys (0-9).  
Press RETURN to go back to the previous menu.  
You may also set to PBC OFF under Personal  
Preferences.  
DVDs may contain menus to access special features.To use  
the disc menu, press the appropriate numerical key; or, use  
the w, v, u, tkeys to highlight your selection, then press  
OK.  
Title menus  
Press DISC MENU.  
G If the current title has a menu, the menu will appear on  
the screen. Otherwise, the disc menu will be displayed.  
The menu can list camera angles, spoken language and  
subtitle options, and chapters for the title.  
Playing an audio CD  
After loading the disc, playback starts automatically.  
If theTV is on, the Audio CD screen appears.  
The number of tracks and the total playing time of the disc  
will be shown on the screen.  
During playback, the current track number and its elapsed  
playing time will be shown on the screen and on the player  
display.  
To remove the title menu, press DISC MENU again.  
Disc menu  
4
5
8
0
6
9
SYSTEM  
MENU  
7
DISC  
MENU  
PressT-C, then press DISC MENU.  
GThe disc menu is displayed.  
To remove the disc menu, pressT-C, then  
press DISC MENU.  
RETURN  
OK  
Playback will stop at the end of the disc.  
To stop playback at any other time, press 9.  
Camera Angle  
If the disc contains sequences recorded from different  
camera angles, the angle icon appears, showing the number  
of available angles and the angle being shown currently.You  
can then change the camera angle if you wish.  
Use the w/vkeys to select the required angle icon.  
G After a while, playback changes to the selected angle.The  
angle icon remains displayed until multiple angles are no  
longer available.  
Pause  
É
É
ë
STOP  
PLAY  
Press ;during playback.  
To return to playback, press 2.  
Ç
É
Å
á
á
í
Search  
Å
á
á
í
ë
SUBTITLE ANGLE TTL/CHAP AUDIO  
T-C  
Changing the audio language  
To search forward or backward through  
the disc at four times the normal speed,  
hold down 5or 6for about one  
second during playback.  
i
REPEAT REPEAT SHUFFLE SCAN  
A-B  
SLOW  
BIT  
TIME  
ZOOM  
Select Y (AUDIO) in the menu bar.  
Press Y or w/vrepeatedly to see the different languages.  
Ö
RATE SEARCH  
G Search begins, and sound is partially muted.  
To step up to eight times the normal speed, press 5or 6  
again.  
G Search goes to eight times the speed, and the sound is  
muted.  
To return to four times the normal speed, press 5or 6  
again.  
If theTV is on, search speed and direction are indicated on  
the screen each time 5or 6is pressed.  
To end the search, press 2to resume playback or 9to stop  
playback.  
Subtitles  
Select Z (SUBTITLE) in the menu bar.  
Press Z or w/vrepeatedly to see the different subtitles.  
19  
OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Å
á
á
í
ë
Moving to another track  
FTS Program  
SUBTITLE ANGLE TTL/CHAP AUDIO  
T-C  
i
REPEAT REPEAT SHUFFLE SCAN  
A-B  
Press Por Obriefly during playback to  
go to the next track or to return to the  
beginning of the current track.  
Press Otwice briefly to step back to the previous track.  
To go directly to any track, enter the track number using  
the numerical keys (0-9).  
FTS Program allows you to store your favorite tracks for a  
particular disc in the player memory.  
Each FTS Program can contain 20 tracks.  
SLOW  
BIT  
TIME  
ZOOM  
Ö
RATE SEARCH  
Å
á
á
í
ë
SUBTITLE ANGLE TTL/CHAP AUDIO  
T-C  
Shuffle  
i
REPEAT REPEAT SHUFFLE SCAN  
A-B  
Press SHUFFLE during playback.  
GThe order of the tracks is changed.  
To return to normal playback, press SHUFFLE again.  
SLOW  
BIT  
TIME  
ZOOM  
Ö
RATE SEARCH  
Å
Storing an FTS Program  
á
á
í
ë
Repeat track/disc  
SUBTITLE ANGLE TTL/CHAP AUDIO  
T-C  
i
1 Load a disc and stop playback.  
2 Use wto go to the list of available tracks.  
REPEAT REPEAT SHUFFLE SCAN  
A-B  
To repeat the track currently playing,  
press REPEAT.  
SLOW  
BIT  
TIME  
ZOOM  
Ö
RATE SEARCH  
G REPEAT TRACK appears on the display.  
To repeat the entire disc, press REPEAT a second time.  
G REPEAT appears on the display.  
3 Use uor tto select tracks from the list.  
To go directly to any track, enter the track number using  
the numerical keys (0-9).  
To exit Repeat mode, press REPEAT a third time.  
4 Store each track by pressing OK.  
GThe track numbers will be added to the list.  
GThe number of tracks and the playing time of the  
program will be shown on the screen and the player display.  
á
á
í
ë
Repeat A-B  
SUBTITLE ANGLE TTL/CHAP AUDIO  
T-C  
i
REPEAT REPEAT SHUFFLE SCAN  
A-B  
To repeat a sequence:  
Press REPEAT A-B at your chosen starting  
point.  
SLOW  
BIT  
TIME  
ZOOM  
Ö
RATE SEARCH  
When your FTS Program is complete, press 2to start  
playback or vto stop playback. In either case, the FTS  
Program will be automatically memorized.  
G A- appears on the player display.  
Press REPEAT A-B again at your chosen end point.  
G A-B appears on the display, and the sequence begins to  
play repeatedly.  
To exit the sequence and return to normal play, press  
REPEAT A-B again.  
Switching FTS ON/OFF  
1 Use vwto move to the FTS ON/OFF selection.  
2 Use uor tto select either ON or OFF.  
Erasing a track from an FTS Program  
Scan  
á
á
í
ë
SUBTITLE ANGLE TTL/CHAP AUDIO  
T-C  
1 Use wto go to the list of selected tracks.  
2 Use uand tto select the track number you wish to erase.  
i
Plays the first 10 seconds of each track  
on the disc.  
Press SCAN.  
REPEAT REPEAT SHUFFLE SCAN  
A-B  
SLOW  
BIT  
TIME  
ZOOM  
Ö
RATE SEARCH  
3 Press OK.  
To continue playback at your chosen chapter/track, press  
GThe track number will be erased from the list of selected  
SCAN again or press 2.  
tracks.  
Erasing the complete program  
1 Use wto select CLEAR ALL, then press OK.  
GThe complete FTS Program for the disc will be erased.  
20  
OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Access Control  
Access control; child lock  
(DVD and VCD)  
Activating/deactivating the child lock  
1 When disc playback is stopped, select ACCESS  
CONTROL in the features menu using the w/vkeys.  
Alternatively, you can press DISC LOCK on the remote  
control if the child lock has been activated.  
Choose 'Play always' to remove the disk from the  
child-safe list  
2 Enter a 4-digit code of your own choice.  
3 Enter the code a second time.  
4 Move to “CHILD LOCK” using the w/vkeys.  
5 Move to LOCK/UNLOCK using the ukey.  
6 Select LOCK using the w/vkeys.  
Deauthorizing discs  
Insert the disc. See ‘Loading discs’.  
G Playback starts automatically.  
Press 9while { is visible.  
7 Press OK or tto confirm, then press tagain to exit the  
GThe | will appear and the disc is now deauthorized.  
menu.  
G Now unauthorized discs will not be played unless the  
4-digit code is entered.  
8 Select UNLOCK to deactivate the CHILD LOCK.  
Access control; Parental  
control (DVD only)  
Note: Confirmation of the 4-digit code is necessary when:  
The code is entered for the very first time (see above),  
The code is changed (see Changing the 4-digit code),  
The code is cancelled (see Changing the 4-digit code).  
Movies on DVDs may contain scenes not suitable for  
children.Therefore, discs may contain ‘Parental Control’  
information which applies to the complete disc or to  
certain scenes on the disc.These scenes are rated from 1  
to 8, and alternative, more suitable scenes are available on  
the disc. Ratings are country dependent.The ‘Parental  
Control’ feature allows you to prevent discs from being  
played by your children or to have certain discs played with  
alternative scenes.  
Authorizing discs  
Insert the disc. See ‘Loading discs’.  
GThe ‘child protect’ dialog will appear.  
You will be asked to enter your 4-digit code for ‘Playback  
Once’ or ‘Playback Always.’ If you select ‘Playback Once’, the  
disc can be played as long as it is in the player and the  
player is ON. If you select ‘Playback Always’, the disc will  
become child safe (authorized) and can always be played,  
even if the Child Lock is set to ON.  
Notes:  
The player memory maintains a list of 120 authorized  
(Child safe) disc titles.A disc will be placed in the list when  
Playback Alwaysis selected in thechild protectdialog.  
Each time a child safedisc is played, it will be placed on  
top of the list.When the list is full and a new disc is added, the  
last disc in the list will be removed from the list.  
Double sided DVDs may have a different ID for each side.  
In order to make the disc child safe, each side has to be  
authorized.  
Multi-volumeVCDs may have a different ID for each  
volume. In order to make the complete set child safe, each  
volume has to be authorized.  
21  
ACCESS CONTROL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Activating/Deactivating Parental Control  
Changing the 4-digit code  
1 When disc playback is stopped, select ACCESS  
CONTROL in the features menu using the w/vkeys.  
2 Enter your 4-digit code. If necessary, enter the code a  
second time.  
3 Move to Parental Level using the w/vkeys.  
4 Move to VALUE ADJUSTMENT (1-8) using the ukey.  
5 Then use the w/vkeys or the numerical keys on the  
remote control to select a rating from 1 to 8 for the disc  
inserted.  
1 When disc playback is stopped, select ACCESS  
CONTROL in the features menu using the w/vkeys.  
2 Enter the old code.  
3 Move to CHANGE CODE using the wkey.  
4 Press the ukey.  
5 Enter the new 4-digit code.  
6 Enter the code a second time and reconfirm by pressing  
OK.  
7 Press tto exit the menu.  
Rating 0 (displayed as ‘– –’):  
Parental Control is not activated.The Disc will be played in  
full.  
If you forget your 4 digit code  
1 Press 9to exit ‘Child Protect’ screen.  
Ratings 1 to 8:  
2 Select ACCESS CONTROL in the features menu using  
The disc contains scenes not suitable for children. If you set  
a rating for the player, all scenes with the same rating or  
lower will be played. Higher rated scenes will not be played  
unless an alternative is available on the disc.The alternative  
must have the same rating or a lower one. If no suitable  
alternative is found, playback will stop and the 4-digit code  
has to be entered.  
the w/vkeys.  
3 The 4-digit code can be cancelled by pressing 9four times  
in the ‘Access Control’ dialog.  
4 You can then enter a new code (twice!) as described above  
(Changing the 4 digit code).  
Parental Control Disclaimer  
6 Press OK or tto confirm, then press tagain to exit the  
menu.  
This DVD player features the PARENTAL CONTROL  
system which is intended to be active when playing DVD  
discs with certain software coding.This is according to  
technical standards adopted by the set maker and disc  
content industries.  
Please note that the PARENTAL CONTROL system  
will not operate a DVD which does not have with the  
appropriate software coding.Also note that at the time of  
release of this DVD player, certain aspects of the technical  
standards had not been settled between set makers and  
the disc industries.  
On this basis Philips cannot guarantee the functioning of  
PARENTAL CONTROL and denies any liability  
associated with unintended watching of disc content.  
If in doubt, please make sure the disc plays according to  
your PARENTAL CONTROL settings before you allow  
children access.  
Country  
1 When disc playback is stopped, select ACCESS  
CONTROL in the features menu using the w/vkeys.  
2 Enter the 4-digit code.  
3 Move to CHANGE COUNTRY using the wkey.  
4 Press the ukey.  
5 Select a country using w/v.  
6 Press OK or tto confirm, then press tagain to exit the  
menu.  
22  
ACCESS CONTROL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Requesting Service  
If it appears that the DVD-Video player is faulty, first consult this checklist. It may be that something has been overlooked. Under  
no circumstances should you attempt to repair the system yourself; this will invalidate the warranty.  
Look for the specific symptom(s).Then perform only the actions listed to remedy the specific symptom(s).  
Symptom  
Remedy  
No power  
– Make sure the mains cord (AC) is properly connected.  
– Check if there is power at the AC outlet by plugging in another appliance.  
No picture  
– Check if theTV is switched on.  
– Check the video connection.  
Distorted picture  
– Check the disc for fingerprints and clean with a soft cloth, wiping from center  
to edge.  
– Sometimes a small amount of picture distortion may appear .This is not a  
malfunction.  
Completely distorted picture  
or no color with player menu.  
– If the picture is distorted completely or if the picture rolls vertically,  
make sure the NTSC/PAL setting at the DVD player matches the video  
signal of your television.  
– If yourTV video signal is NTSC, select the NTSC setting at the DVD player.  
– If your video signal is PAL, select the PAL setting - see NTSC/PAL SETTINGS.  
Distorted or Black/White picture  
with DVD orVideo CD.  
– The disc format does not match yourTV’s video signal (PAL/NTSC).  
No sound  
– Check audio connections.  
– If you are using a HiFi amplifier, try another sound source.  
Distorted sound from HiFi  
amplifier.  
– Check to make sure that no audio connections are made to the amplifier  
phono input.  
No audio at digital output.  
– Check the digital connections.  
– Check the settings menu to make sure the digital output is set to ALL or  
PCM.  
– Check if the audio format of the selected audio language matches your  
receiver capabilities.  
Disc cant be played.  
– Ensure the disc label is facing up.  
– Clean the disc.  
– Check if the disc is defective by trying another disc.  
– Check to see if the disc is defective, badly scratched or warped (not flat)  
No return to start-up screen when  
disc is removed.  
– Reset by switching the player off, then on again.  
– Check to see if the program requires another disc to be loaded.  
The player does not respond to  
the remote control.  
– Aim the remote control directly at the sensor on the front of the player.  
– Remove any obstacles between the player and the remote control.  
– Inspect or replace the batteries in the remote control.  
Buttons do not work.  
– In order to completely reset the player, unplug the AC cord from the AC  
outlet. (Please ensure that the set is not in Initial Setup mode)  
Player does not respond to some  
operating commands during  
playback.  
– Operations may not be permitted by the disc. Refer to the instructions of  
the disc.  
DVD-Video player cannot read  
CDs/DVDs  
– Use a commonly available cleaning CD/DVD to clean the lens before  
sending the DVD-Video player for repaired.  
23  
Download from Www.Somanuals.com. All Manuals Search AndBDoEwFnOloaRdE. REQUESTING SERVICE  
Appendix  
Delay times  
Speaker Settings  
The DVD player is set to reproduce correctly synchronized  
Digital Surround Sound in a listening area where the  
surround speakers are about 150cm nearer to the listening  
position than the front speakers, and the center speaker is  
in line with the front speakers.To adjust for other listening  
area arrangements, adapt delay times according to the  
following instructions:  
6 Channel settings  
Front speaker  
L (Large): When the front speakers can reproduce  
low frequency signals below 120Hz  
S (Small): When the front speakers cannot produce  
low frequency signals below 120Hz  
Digital Surround  
Center Speaker*  
Measure the distances in centimeters from the front  
speaker and the surround speaker to the listening  
positioning.  
L (Large): When the center speaker can reproduce  
low frequency signals below 120Hz  
S (Small): When the center speaker cannot produce  
low frequency signals below 120Hz  
Subtract the surround distance from the front distance and  
divide by 30.The result is the required Surround Channel  
delay time in milliseconds.  
Off:  
When the center speaker is not connected  
If the center speaker is in line with the front speaker, no  
center speaker delay is needed. If, however, it is nearer the  
listening position, measure the distance in centimeters  
between the front and center speaker planes, and divide by  
30.The result is the required Center Channel delay time in  
milliseconds.  
Surround speakers  
L (Large): When the surround speakers can  
reproduce low frequency signals below  
120Hz  
S (Small): When the surround speakers cannot  
produce low frequency signals below  
120Hz  
Digital Surround Delay  
10  
5
ms ms  
0 ms  
0 ms  
0 ms  
0 ms  
-5 ms  
-10 ms  
40  
35  
30  
25  
20  
15  
10  
5
Off:  
When the surround speakers are not  
connected  
0 ms  
0 ms  
0 ms  
5 ms  
10 m
15 m
15 m
15 ms  
Subwoofer  
Differential  
arrival time  
On:  
Off:  
When you connect a subwoofer  
When a subwoofer is not connected  
0
Preferred  
0
5
10 15 20 25 30 35 40  
Acceptable  
Not recommended  
Distance from front speakers (feet)  
Note:  
Certain speaker settings are prohibited by the Dolby Digital  
licensing agreement.  
Center  
speaker  
Front speaker  
left  
Front speaker  
right  
TV  
Rear speaker  
(left surround)  
Rear speaker  
(right surround)  
24  
APPENDIX  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PLAYBACK SYSTEM  
DVD-Video  
Video CD  
CONNECTIONS  
Y Output  
CB (U) Output  
Cinch (green)  
Cinch (blue)  
CD (CD-R and CD-RW)  
DVD+RW  
CR (V) Output  
S-Video Output  
Video Output  
Audio L+R output  
6 Channel Analog Output  
Audio Front Left/Right  
Audio Surround Left/Right  
Audio Center  
Cinch (red)  
Mini DIN, 4 pins  
Cinch (yellow)  
Cinch (white/red)  
OPTICAL READOUT SYSTEM  
Lasertype  
Numerical Aperture  
Semiconductor AlGaAs  
0.60 (DVD)  
0.45 (VCD/CD)  
650 nm (DVD)  
780 nm (VCD/CD)  
Cinch (white/red)  
Cinch (white/red)  
Cinch (blue)  
Cinch (black)  
Wavelength  
Audio Subwoofer  
Digital Output  
1 coaxial, 1 optical  
DVD DISC FORMAT  
Medium  
Diameter  
Playing time  
(12cm)  
IEC958 for CDDA / LPCM  
IEC1937 for MPEG1/2,AC-3 and Dolby Digital  
6.3 mm Jack  
Optical Disc  
12cm (8cm)  
One layer  
Dual layer  
Two side  
Single layer  
Two side  
Dual layer  
Headphone  
2.15 h*  
4 h*  
4.30 h*  
CABINET  
Dimensions (w x h x d)  
17.12 x 3.94 x 12.64 inch  
435 x 100 x 321mm  
Approx. 8.8 pounds  
Approx. 4 Kg  
8 h*  
Weight  
VIDEO FORMAT  
DA Converter  
GENERAL FUNCTIONALITY  
Stop / Play / Pause  
10 bits  
Signal handling  
Digital Compression  
Components  
MPEG2 for DVD,  
MPEG1 forVCD  
Fast Forward / Backward  
Time Search  
Step Forward / Backward  
Slow Motion  
TV STANDARD  
Number of lines  
Playback  
(PAL/50Hz)  
625  
Multistandard  
(NTSC/60Hz)  
525  
(PAL/NTSC)  
Title / Chapter /Track Select  
Skip Next / Previous  
Repeat (Chapter /Title / All) or (Track / All)  
A-B Repeat  
DVD  
Shuffle  
Horiz. Resolution  
Vertical Resolution  
720 pixels  
576 lines  
720 pixels  
480 lines  
Scan  
Enhanced ease of use graphical interface  
Perfect Still with digital multi-tap filter  
Zoom (xl.33, x2. x4) with picture enhancement  
Smart Picture (Personal Colour Settings)  
3D Sound (TruSurround)  
5.1 Channels user defined speaker settings  
Easy Jog  
VCD  
Horiz. Resolution  
Vertical Resolution  
352 pixels  
288 lines  
352 pixels  
240 lines  
VIDEO PERFORMANCE  
Video output  
S-Video output  
1Vpp into 75 ohm  
Audio and video bit rate indicator  
Beeper  
Y: 1Vpp into 75 ohm  
C: 0.3Vpp into 75 ohm  
Y: 1Vpp into 75 ohm  
Y CB CR (YUV) output  
DVD FUNCTIONALITY  
CB CR: 0.7Vpp into 75 ohm  
On/Off  
Left/Right  
Multi-angle Selection  
Black Level Shift  
Video Shift  
Audio Selection (1 out of max. 8 languages)  
Subtitles Selection (1 out of max. 32 languages)  
Aspect Ratio conversion (16:9, 4:3 Letterbox, 4:3 Pan Scan)  
Parental Control and Disk Lock  
AUDIO FORMAT  
Digital  
MPEG  
DTS/Dolby Digital  
PCM  
Compressed Digital  
Disc Menu support (Title Menu and Access Control)  
Resume (5 discs) after stop / standby  
ProgrammingTitles/chapters with Favorite Selection  
16, 20, 24 bits  
fs, 44.1, 48, 96 kHz  
Analog Sound Stereo  
2 channel downmix from DTS multi-channel sound  
Dolby Pro Logic downmix from Dolby Digital multi-channel sound  
Full decoding of Dolby Digital and DTS multi-channel surround sound  
3D Sound (TruSurround) for virtual 5.1 channel sound on 2 speakers  
VIDEO CD FUNCTIONALITY  
Playback Control forVCD 2.0 discs  
Disc Lock  
Resume (5 discs) after stop / standby  
ProgrammingTracks with Favorite Selection  
AUDIO PERFORMANCE  
AUDIO CD FUNCTIONALITY  
DA Converter  
DVD  
24 bits  
Time Display (Total /Track / RemainingTrackTime)  
Full audio functionality with remote control  
Programming with FavoriteTrack Selection  
fs 96 kHz  
fs 48 kHz  
fs 44.1 kHz  
fs 44.1 kHz  
4 Hz - 44 kHz  
4 Hz - 22 kHz  
4 Hz - 20 kHz  
4 Hz - 20 kHz  
103 dB  
100 dB  
113 dB  
92 dB  
Video CD  
CD  
Signal-Noise (1kHz)  
Dynamic Range (1kHz)  
Crosstalk (1kHz)  
Distortion and Noise (1kHz)  
Headphone  
*
typical playing time for movie with 2 spoken languages and 3 subtitle languages.  
Specifications subject to change without prior notice  
30mW at 32 Ohm load,  
headphone imp. 8-2k Ohm  
25  
SPECIFICATIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Peavey Music Pedal Dirty Dog User Manual
Perlick Beverage Dispenser Z2148EMU User Manual
Philips Baby Accessories SCF880 User Manual
Philips CRT Television 13PR12W99 User Manual
Philips DVD Player SL 0347 17 1 User Manual
Phonex Broadband Modem PX 441 User Manual
Pioneer Stereo Amplifier GM 6400F User Manual
Polycom Cordless Telephone 103 2005 001 User Manual
Polycom Telephone IP 600 601 User Manual
ProForm Home Gym PFEX441770 User Manual