DVDVideo player
DVD941
Toll Free Help Line
Ligne d'assistance en service libre
Linea de ayuada telefónica sin cargo
800-531-0039
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
English -------------------------------------------------------- 7
Français------------------------------------------------------26
Español ------------------------------------------------------48
LASER SAFETY
1
The region code for this set is 1.
This unit employs a laser. Due to possible eye injury, only
a qualified service person should remove the cover or
attempt to service this device.
Since it is usual for DVD movies to be released at
different times in different regions of the world, all
players have region codes and discs can have an optional
region code. If you load a disc of a different region code
to your player, you will see the region code notice on
the screen.The disc will not play and should be
unloaded.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE.
LASER
Type
Wave length
NOTE:
Semiconductor laser GaAlAs
650 nm (DVD)
780 nm (VCD/CD)
7 mW (DVD)
10 mW (VCD/CD)
60 degree
PICTURES SHOWN MAYBE DIFFERENT
BETWEEN COUNTRIES.
Output Power
NEVER MAKE OR CHANGE CONNECTIONS
WITH THE POWER SWITCHED ON.
Beam divergence
CAUTION
VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN AVOID EXPOSURE TO BEAM
(WARNING LOCATION: INSIDE ON LASER
COVERSHIELD OR THE BACKPLATE OF SET)
Manufactured under license from Dolby Laboratories.
“Dolby”and the double-D symbol are trademarks of Dolby
Laboratories. Confidential Unpublished Works. ©1992-
1997 Dolby Laboratories, Inc. All rights reserved.
This product incorporates copyright protection technology
that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
TruSurround and the SRS symbol are trademarks of SRS
Labs., Inc.TruSurround technology is manufactured under
license from SRS Labs., Inc.
“DTS” and “DTS Digital Out” are trademarks of Digital
Theater Systems, Inc.
For Customer Use:
Read carefully the information located at the bottom of your DVD-VIDEO player and enter below the Serial No. Retain
this information for future reference.
Model No. DVD-VIDEO 941
Serial No. __________________________
3
INDEX
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
WARNING
To reduce the risk of fire or electric shock, do not expose
this appliance to rain or moisture.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol warns the user that uninsulated voltage
within the unit may have sufficient magnitude to cause
electric shock. Therefore, it is dangerous to make
any kind of contact with any inside part of this unit.
The set complies with the FCC-Rules, Part 15 and with 21
CFR 1040.10.
This symbol alerts the user that important literature
concerning the operation and maintenance of this
unit has been included. Therefore, it should be read
carefully in order to avoid any problems.
Canada
This digital apparatus does not exceed the Class B limits for
radio noise emissions from digital apparatus as set out in
the Radio Interference Regulations of the Canadian
Department of Communications.
AVISO
AVIS
Para reducir el riesgo de fuego o choque eléctrico, no
exponga el aparato a la lluvia o humedad.
RISQUE DE CHOCS ÉLECTRIQUES
NE PAS OUVRIR
Attention: Afin de prévenir le risque de chocs électriques,
ne pas retirer les vis.
Toute réparation devrait être confiée à un personnel qualifié.
ATENCIÓN
El uso de mando o ajustes o la ejecucción de métodos que
no sean los aquí descritos puede ocasionar peligro de
exposición a radiación.
Ce symbole indique la présence d’une tension
suffisamment élevée pour engendrer un risque de
chocs électriques.
Ce symbole indique que le manuel d’installation
fourni avec l’appareil contient d’importantes
recommandations quant au fonctionnement et
à l’entretien de ce dernier.
El aparato cumple las normas FCC, Parte 15 y 21 CFR
1040.10.
AVIS
Afin de réduire tout risque d’incendie ou de choc
électrique, il ne faut pas exposer cet appareil à la pluie ou à
l’humidité.
AVISO
RIESGO DE CHOQUE ELÉCTRICO
NO ABRIR
ATTENTION
L'utilisation des commandes ou réglages ou le non-respect
des procédures ci-incluses peuvent se traduire par une
exposition dangereuse à l'irradiation.
Atención: Para reducir el riesgo de choque elécrico,
no quite la tapa (o el panel posterior).
En su interior no hay piezas que el usuario pueda reparar.
Para servicio dirijase a personal calificado.
Este símbolo tiene por finalidad advertir al usuario de
la presencia de tensión peligrosa no aislada dentro de
la caja del aparato, que puede ser lo suficientemente
fuerte para constituir un peligro de choque eléctrico.
L'appareil répond aux normes FCC, Part 15 et 21 CFR
1040.10.
Este símbolo sirve para advertir al usuario de la
presencia de instrucciones de manejo y
mantenimiento (servicio) importantes en el manual
que acompaña al aparato.
Canada
Cet appareil numérique n'emet pas de bruits
radioélectriques dépassant les limites applicables aux
appareils numériques de Class B prescrites dans le
Règlement sur le Brouillage Radioélectrique édicté par le
Ministère des Communications du Canada.
4
GENERAL INFORMATION
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
– Read before operating equipment
This product was designed and manufactured to meet strict
quality and safety standards.There are, however, some
installation and operation precautions which you should be
particularly aware of.
9. Do not defeat the safety
purpose of the polarized or
grounding-type plug.A polarized plug
has two blades with one wider than
AC Polarized
Plug
the other.A grounding type plug has two blades and a third
grounding prong.The wide blade or the third prong are
provided for your safety.When the provided plug does not
fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
1. Read these instructions – All the safety and operating
instructions should be read before the appliance is
operated.
2. Keep these instructions –The safety and operating
instructions should be retained for future reference.
10.Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
3. Heed all warnings – All warnings on the appliance and in
the operating instructions should be adhered to.
4. Follow all instructions – All operating and use
11.Only use attachments/accessories specified by the
instructions should be followed.
manufacturer.
5. Do not use this apparatus near water – for example,
near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement or near a swimming pool, etc.
12.
Use only with a cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus.When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
6. Clean only with a damp cloth.The appliance should
be cleaned only as recommended by the manufacturer.
13.Unplug this apparatus during lightning storms or when
7. Install in accordance with the manufacturers
instructions. Do not block any of the ventilation
openings. For example, the appliance should not be
situated on a bed, sofa, rug, or similar surface or placed in a
built-in installation, such as a bookcase or cabinet that may
impede the flow of air through the ventilation openings.
unused for long periods of time.
14.Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
15. Battery usage CAUTION –To prevent battery leakage
which may result in bodily injury or damage to the unit:
G
G
Install all batteries correctly, + and - as marked on the unit.
Do not mix batteries (old and new or carbon and
alkaline, etc.).
G
Remove batteries when the unit is not used for a long time.
EL 6475-E001: 00/8
5
IMPORTANT SAFETY INSTRUCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
DVDVIDEO PLAYER
90 Days Free Labor
OneYear Exchange Warranty on Parts
This product must be carried in for repair.
WHO IS COVERED?
You must have proof of purchase to receive warranty service.A sales
receipt or other document showing that you purchased the product is
considered proof of purchase.
MAKE SUREYOU KEEP...
Please keep your sales receipt or other document showing proof of
purchase.Attach it to this owner’s manual and keep both nearby.Also
keep the original box and packing material in case you need to return
your product.
WHAT IS COVERED?
Warranty coverage begins the day you buy your product. For 90 days
thereafter, all parts will be repaired or replaced, and labor is free. From
BEFORE REQUESTING SERVICE...
Please check your owner’s manual before requesting service.
90 days to one year from the day of purchase, all parts will be repaired or Adjustments of the controls discussed there may save you a service
replaced, but you pay for all labor charges. After one year from the day
of purchase, you pay for the replacement or repair of all parts, and for
all labor charges.
call.
TO GET WARRANTY SERVICE IN U.S.A.,
All parts, including repaired and replaced parts, are covered only for
the original warranty period.When the warranty on the product
expires, the warranty on all replaced and repaired parts also expires.
PUERTO RICO OR U.S. VIRGIN ISLANDS...
Take the product to a Philips factory service center (see enclosed list)
or authorized service center for repair.When the product has been
repaired, you must pick up the unit at the center. Centers may keep
defective parts.
WHAT IS EXCLUDED?
Your warranty does not cover:
(In U.S.A., Puerto Rico and U.S.Virgin Islands, all implied warranties,
including implied warranties of merchantability and fitness for a particu-
lar purpose, are limited in duration to the duration of this express war-
ranty. Because some states do not allow limitations on how long an
implied warranty may last, this limitation may not apply to you.)
•
labor charges for installation or setup of the product, adjustment of
customer controls on the product, and installation or repair of
antenna systems outside of the product.
•
product repair and/or part replacement because of misuse, accident,
unauthorized repair or other cause not within the control of Philips
Consumer Electronics.
TO GET WARRANTY SERVICE IN CANADA...
Please contact Philips at:
•
•
reception problems caused by signal conditions or cable or antenna
systems outside the unit.
a product that requires modification or adaptation to enable it to
operate in any country other than the country for which it was
designed, manufactured, approved and/or authorized, or repair of
products damaged by these modifications.
1-800-661-6162 (French Speaking)
1-800-363-7278 (English Speaking)
(In Canada, this warranty is given in lieu of all other warranties. No
other warranties are expressed or implied, including any implied war-
ranties of merchantability or fitness for a particular purpose. Philips is
not liable under any circumstances for any direct, indirect, special, inci-
dental or consequential damages, howsoever incurred, even if notified
of the possibility of such damages.)
•
•
incidental or consequential damages resulting from the product.
(Some states do not allow the exclusion of incidental or consequen-
tial damages, so the above exclusion may not apply to you.This
includes, but is not limited to, prerecorded material, whether copy-
righted or not copyrighted.)
a product that is used for commercial or institutional purposes
(including but not limited to rental purposes).
REMEMBER...
WHERE IS SERVICE AVAILABLE?
Please record the model and serial numbers found on the product
below.Also, please fill out and mail your warranty registration card
promptly. It will be easier for us to notify you if necessary.
MODEL # ___________________________________________
SERIAL # ___________________________________________
Warranty service is available in all countries where the product is offi-
cially distributed by Philips Consumer Electronics. In countries where
Philips Consumer Electronics does not distribute the product, the local
Philips service organization will attempt to provide service (although
there may be a delay if the appropriate spare parts and technical manu-
al(s) are not readily available).
This warranty gives you specific legal rights.You may have other rights which vary from state/province to state/province.
Philips Service Solutions Group, P.O. Box 2976, Longview,Texas 75606, (903) 242-4800
EL6191E003 / MAC 6058 / 12-98
6
LIMITED WARRANTY
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Introduction
Philips DVD-Video Introduction ------------------------- 8
Unpacking ---------------------------------------------------- 8
Remote Control battery installation-------------------- 8
Safety Information ------------------------------------------ 8
Cleaning Discs ---------------------------------------------- 8
Functional overview
Front panel and Display ----------------------------------- 9
Remote control --------------------------------------------10
Rear panel --------------------------------------------------11
Preparation
General notes ----------------------------------------------12
Connecting to aTV ---------------------------------------12
Connecting to optional equipment-----------------12-13
NTSC/PAL Settings----------------------------------------13
General explanation --------------------------------------13
Menu bar/Status window---------------------------------14
Temporary feedback field icons -------------------------14
Personal Preferences----------------------------------14-15
Operation
Loading discs -----------------------------------------------16
Playing a DVD-Video andVideo CD disc--------------16
General Features --------------------------------------16-18
Special DVD features -------------------------------------19
SpecialVCD features--------------------------------------19
Playing an Audio CD ----------------------------------19-20
FTS Program -----------------------------------------------20
Access Control
Access Control: child lock -------------------------------21
Access Control: parental control -------------------21-22
Before requesting service
Before requesting service --------------------------------23
Appendix
Speaker Settings ----------------------------------------- 24
Specifications
Specifications -----------------------------------------------25
7
CONTENTS
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Philips DVD-Video
Introduction
Remote control battery
installation
Your Philips DVD-Video player will play digital video discs
conforming to the universal DVD-Video standard.With it,
you will be able to enjoy full-length movies with true
cinema picture quality, as well as stereo or multi-channel
sound (depending on the disc and your playback setup).
The unique features of DVD-Video, such as selection of
sound track, subtitle languages and different camera angles
(again depending on the disc), are all included.
¶
Insert batteries as indicated inside the battery
compartment.
Caution: Do not mix old and new batteries. Never
mix different types of batteries (standard, alkaline,
etc.).
In addition to DVD-Video discs, you will be able to play all
Video CDs and Audio CDs (including finalized CD
Recordable and CD Rewritable).
DVD-Video
You will recognize DVD-Video discs by the logo shown.
Depending on the material on the disc (a movie, video clips,
a drama series, etc.) the disc may have one or moreTitles.
Safety Information
¶
Do not expose the system to excessive moisture, rain, sand,
or heat sources.
DVD-VIDEO DISC
TITLE 1
TITLE 2
¶
¶
Place the player on a firm, flat surface.
Keep the player away from domestic heating equipment
and direct sunlight.
CHAPTER 1 CHAPTER 2 CHAPTER 1 CHAPTER 2
CHAPTER 3
¶
¶
In a cabinet, allow about 2.5 cm (1 inch) of free space all
around the player for adequate ventilation.
If the DVD-Video player cannot read CDs/DVDs correctly,
use a commonly available cleaning CD/DVD to clean the
lens before taking the DVD-Video player to be repaired.
Other cleaning methods may destroy the lens.Always keep
the tray closed to avoid dust on the lens.
Video CD
You will recognizeVideo CDs by the logo
shown.
¶
The lens may cloud over when the DVD-Video player is
suddenly moved from cold to warm surroundings. Playing a
CD/DVD is not possible then. Leave the power on for
about one hour with no disc in the unit until normal
playback is possible.
Audio CD
Audio CDs contain music tracks only.
You will recognize Audio CDs by the logo
shown.
Cleaning discs
Unpacking
¶
¶
When a disc becomes dirty, clean it with a cleaning cloth.
Wipe the disc from the center out.
Do not use solvents such as benzine, thinner, commercially
available cleaners, or anti-static spray intended for analog
discs.
First check and identify the contents of your DVD-Video
player package.
You should have the following items.
– DVD-Video player
– Remote Control with batteries
– AC power cord
– Audio cable
– Video cable
– Instructions for use
If any item is damaged or missing, contact your retailer or
Philips.
Keep the packaging material; for future transportation.
8
INTRODUCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Overview
Front panel and Display
POWER ON/OFF
– switches the player to ON or OFF
SOUND
– select Stereo, Dolby Surround, 3D
Sound(TruSurround) or multi-channel
STANDBY INDICATOR
– lights red when the player is in Standby
mode
ST EASY JOG
– controls Fast Forward/Rewind/Previous/
Next and Slow motion in various steps
DISPLAY
– shows the current status of the player
9 STOP
– stops video/audio playback
2; PLAY/PAUSE
– starts or interrupts playback
DVD941 DVD/VIDEO CD/CD PLAYER
POWER ON/OFF
PLAY/PAUSE
STOP
SOUND
TITLE CHAPTER TRACK
TOTAL TRACK TIME
SCAN
A
-B REPEAT SHUFFLE CHAPTER TITLE TRACK
VCD
OPEN/CLOSE
HEADPHONE LEVEL
EASY JOG
MIN
MAX
LEVEL
DISC TRAY
– headphone volume control
/ OPEN/CLOSE
HEADPHONE
– opens/closes the disc tray
– for connecting headphones
TITLE CHAPTER TRACK
SCAN
SHUFFLE
TOTAL TRACK TIME
A
-B REPEAT
CHAPTER TITLE TRACK
VCD
DVD inserted
Remote control active (flashing)
FTS active
Video CD or Audio CD inserted
VCD
SCAN
SCAN active
Indicates current player function:
Playback, Pause, Search, etc.
A-B REPEAT
REPEAT A-B active
SHUFFLE active SHUFFLE
Front (left and right) and Center
speakers active
Test tone active
Active audio format
Surround (left and right) and
Subwoofer speakers active
9
FUNCTIONAL OVERVIEW
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
DVD ON/OFF
– switches DVD to ON/OFF mode
TV ON/OFF
– switches TV to ON/OFF mode
DVD
TV
2
2
0-9 numerical key pad
– direct numerical inputs
TV VOL (+/–)
– to turn TV volume up/down
ON/OFF
ON/OFF
PBC
ON/OFF
DISC / LOCK
+
TV VOL
-
+
TV P
-
RESUME
PBC (ON/OFF)
FTS
– activate/deactivate PBC
RETURN
– go back to previous menu
FTS
– activate FTS
1
4
2
5
8
3
6
9
OK
– acknowledge menu selection
DISC LOCK ( Ç )
– to activate/deactivate an
authorized disc
7
DISC
SYSTEM
MENU
MENU
Q O
– search backward* / go to
previous chapter or track
0
RESUME
– to continue playback from
STOP/PAUSE mode
RETURN
OK
;
TV P (+/–)
– to turn TV program up/down
É
É
– pause playback temporarily /
frame-by-frame playback
STOP
PLAY
Ç
É
R P
– search forward* / go to next
chapter or track
DISC MENU
– access menu of a DVD disc
Å
á
á
í
ë
SUBTITLE ANGLE TTL/CHAP AUDIO
T-C
SYSTEM MENU
– access or remove player’s menu
i
REPEAT
– repeat chapter, track, title, disc
REPEAT REPEAT SHUFFLE SCAN
A-B
SLOW
BIT
TIME
ZOOM
REPEAT (A-B)
– repeat sequence
1 2 3 4
Ö
RATE SEARCH
– (left/right/up/down) cursor
movement for selection
SHUFFLE
– play tracks in random order
STOP ( 9 )
– to stop playback
SCAN
– play of the first 10 seconds of
each track/chapter within a disc
PLAY ( 2 )
– to start playback
SLOW ( x )
– slow motion
SUBTITLE ( Z )
– subtitle language selector
BIT RATE
– displays bit rate indicator during
playback
ANGLE ( } )
– select DVD camera angle
TTL/CHAP (T-C)
– select title/chapter
TIME SEARCH
– start playback at a specific time
AUDIO ( Y )
– audio language selector
ZOOM ( a )
– enlarge video image
* Press and hold key for about 2 seconds
10
FUNCTIONAL OVERVIEW
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear panel
MAINS (AC)
– connect to power source
OPTICAL (Digital audio out jack)
– connect to digital (optical) equipment
COAXIAL (Digital audio out jack)
– connect to digital (coaxial) equipment
Y CB CR
– connect to TV with Y CB CR inputs
S-VIDEO OUT (Y/C)
– connect to TV with S-Video (Y/C) inputs
VIDEO OUT (CVBS)
– connect to TV with CVBS video inputs
SURROUND
FRONT
CENTER
DIGITAL AUDIO OUT
PCM/MPEG2/AC-3/DTS
L
1
2
L
L
R
R
R
MAINS
CVBS
S-VIDEO
CR
Y
CB
SURROUND
FRONT
SUB WF
OPTICAL
COAXIAL
AUDIO OUT
MULTICHANNEL AUDIO OUT
VIDEO OUT
MULTICHANNEL AUDIO OUT
(For connection to a multichannel receiver)
– center speaker connection
– subwoofer connection
– front speakers connections
– surround speakers connections
AUDIO OUT (Left/Right)
– connect to amplifier, receiver or stereo system
Caution: Do not touch the inner pins of the jacks
on the rear panel. Electrostatic discharge may
cause permanent damage to the unit.
11
FUNCTIONAL OVERVIEW
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
General notes
Connecting to optional
equipment
¶
¶
¶
Depending on yourTV and other equipment you wish to
connect, there are various ways you could connect the
player.
Please refer to the manuals of yourTV,VCR, Stereo System
or other devices as necessary to make the best
connections.
Connecting to an amplifier equipped with
two channel analog stereo or Dolby
Surround
1 Connect the Left and Right audio out jacks of the DVD
player to the audio left and right in jacks on your amplifier,
receiver or stereo system, using the optional audio cable
(A).
For better sound reproduction, connect the player’s audio
out jacks to the audio in jacks of your amplifier, receiver,
stereo or audio/video equipment. See ‘Connecting to
optional equipment’.
Caution:
Connecting to an amplifier equipped with
two channel digital stereo (PCM) or to an
Audio/Video receiver equipped with a
multi-channel decoder (Dolby Digital™,
MPEG 2 and DTS)
– Do not connect the player’s audio out jack to
the phono in jack of your audio system.
– Do not connect your DVD-player via yourVCR.
The DVD image could be distorted by the copy
protection system.
1 Connect the player’s digital audio out jack (optical G or
coaxial F) to the corresponding in jack on your amplifier.
Use an optional digital (optical G or coaxial F) audio cable.
Connecting to a TV
2 You will need to activate the player’s digital output (see
ComponentVideo (Y CB CR) connection
‘Personal Preferences’).
1
Connect theY, CB, CR out jacks on the DVD-player to the
corresponding in jacks on theTV using optionalY, CB, CR cable (Z).
Digital Multi-channel sound
The digital multi-channel connection provides the best
sound quality. For this you need a multi-channel A/V
receiver that supports one or more of the audio formats
supported by your DVD player (MPEG 2, Dolby Digital™
and DTS). Check the receiver manual and the logos on the
front of the receiver.
2 Connect the Left and Right audio out jacks to the audio
left/right in jacks on theTV (A).
S-Video (Y/C) connection
1 Connect the S-Video out jack on the DVD-player to the S-
Video in jack on theTV using an optional S-Video cable (Y).
2 Connect the Left and Right audio out jacks to the audio
left/right in jacks on theTV (A).
AMPLIFIER
TV
Video CVBS connection
1 Connect theVideo out (CVBS) jack on the player to the
video in jack on theTV using the video cable supplied (X).
2 Connect the Left and Right audio out jacks to the audio
left/right in jacks on theTV (A).
G
F
A
X
Y
Z
TV
SURROUND CENTER
FRONT
DIGITAL AUDIO OUT
PCM/MPEG2/AC3/DTS
L
1
2
L
L
R
R
R
MAINS
CVBS
S-VIDEO
CR
Y
CB
SURROUND SUB WF
FRONT
OPTICAL
COAXIAL
AUDIO OUT
MULTICHANNEL AUDIO OUT
VIDEO OUT
Z
A
X
Y
SURROUND CENTER
FRONT
DIGITAL AUDIO OUT
PCM/MPEG2/AC3/DTS
L
1
2
L
L
R
R
R
MAINS
CVBS
S-VIDEO
CR
Y
CB
SURROUND SUB WF
FRONT
OPTICAL
COAXIAL
AUDIO OUT
MULTICHANNEL AUDIO OUT
VIDEO OUT
12
PREPARATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
NTSC/PAL Settings
– If the audio format of the digital output does not match the
capabilities of your receiver, the receiver will produce a strong,
distorted sound or no sound at all.
– The selected audio format of the DVD is displayed in the
Status Window when the SYSTEM MENU is activated or when
the Audio button is pressed.
– Six Channel Digital Surround Sound via digital connection
can only be obtained if your receiver is equipped with a Digital
Multi-channel decoder.
– To see the selected audio format of the current DVD in the
Status Window, press the SYSTEM MENU or the Audio
Language selector button.
You can switch the NTSC/PAL setting of the DVD player to
match the video signal of yourTV.This setting only affects
the television’s on-screen display that shows the stop and
setup modes.You may select either NTSC or PAL.To
change the DVD player setting to PAL or NTSC, follow the
steps below.
1 Press the POWER ON/OFF button on the front panel of
the DVD player to turn OFF the DVD player.
2 Press and hold 9and SOUND, on the front of the DVD
player.While holding 9and SOUND, press POWER ON/
OFF.
Analog connection to a multi-channel A/V
receiver with 6 Channel connectors
3 After PAL or NTSC appears on the display panel of the
DVD player, release 9and SOUND, at the same time.
The PAL or NTSC indicator that appears on the display
panel indicates the current setting.
4 To change the setting, press SOUND, within three
seconds.The new setting (PAL or NTSC) will appear on the
display panel.
This DVD player contains a multi-channel decoder.This
enables playback of DVDs recorded in Multi-channel
Surround without the need for an optional decoder.
1 Connect the audio out jacks for the Center speaker and
the Subwoofer connection (C) to the corresponding in
jacks on your receiver.
2 Connect the Left and Right audio out jacks for the Front
speaker (B) to the corresponding in jack on your receiver.
3 Connect the Left and Right audio out jacks for Surround
speaker (D) to the corresponding in jacks on your receiver.
4 Make the appropriate Sound settings for Analog Output
and Speaker Settings in the Personal Preferences menu.
General explanation
About this manual
This manual gives the basic instructions for operating the
DVD player. Some DVDs require specific operation or
allow only limited operation during playback.When this
occurs, the symbol Ä appears on theTV screen, indicating
that the operation is not permitted by the player or the
disc.
AMPLIFIER
TV
Remote control operation
¶
Unless stated, all operations can be carried out with the
remote control.Always point the remote control directly at
the player, making sure there are no obstructions between
the remote and the player.
Corresponding keys on the front panel of the player can
also be used.
C
B
D
X
Y
Z
Menu bar operation
SURROUND CENTER
FRONT
DIGITAL AUDIO OUT
PCM/MPEG2/AC3/DTS
L
1
2
L
L
R
R
R
MAINS
CVBS
S-VIDEO
CR
Y
CB
¶
A number of operations can be carried out via the menu
bar on the screen.The menu bar can be accessed by
pressing the cursor keys on the remote control.
Pressing SYSTEM MENU while the menu bar is displayed
will clear the menu bar from the screen.
The selected item will be highlighted and the appropriate
cursor keys to operate will be displayed below the icon.
The symbols < or > indicates that more items are available
at the left/right of the menu bar. Press tor uto select
these items.
SURROUND SUB WF
FRONT
OPTICAL
COAXIAL
AUDIO OUT
MULTICHANNEL AUDIO OUT
VIDEO OUT
¶
¶
¶
13
PREPARATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu bar/Status window
Personal Preferences
V
W
X
Y
Z
}
Personal Preferences
Title/Track
Chapter/Index
Audio language
Subtitle language
Angle
You can set your own personal preferences on the player.
General operation:
¶
¶
Press SYSTEM MENU on the remote control.
Select V in the menu bar.
GThe Personal Preferences menu appears.
Use the tuwvkeys to move through the menus,
submenus and submenu options.
G When a menu item is selected, the cursor keys (on the
remote control) needed to operate the item are displayed
next to the item.
a
b
c
d
Zoom
¶
Color Settings (Smart Picture)
Video Program
Sound
e Picture by Picture
Slow motion
g Fast motion
Time search
f
¶
Press OK to confirm your selection and return to the main
menu.
h
The following items can be adapted:
Picture
– TV Shape
If you have a wide screen (16:9)TV, select 16:9.
If you have a regular (4:3)TV, select 4:3.
If you have a 4:3TV, you can also select between:
Letterbox for a ‘wide-screen’ picture with black bars at the
top and bottom of the screen, or Pan Scan, for a full-height
picture with the sides trimmed. If a disc supports the
format, the picture will be shown accordingly.
Temporary Feedback Field
icons
– Black level shift (NTSC users only)
Scan
Select ON for adapting the color dynamics to obtain richer
contrasts.
Repeat All
RepeatTitle
RepeatTrack
Repeat Chapter
Shuffle
Shuffle Repeat
Repeat A to end
Repeat A-B
Angle
– Video shift
The factory centers the video on your screen. Use this
setting to personalize the position of the picture on your
TV by moving it to the left or right.
Child Lock On
Child Safe
Resume
Action prohibited
14
PREPARATION
Download from Www.Somanuals.com. All Manuals Search And Download.
– Color settings (Y CB CR connection only)
– Speaker settings
You can select one of five predefined sets of color settings
or define one set (Personal) yourself.
Allows you to select speaker settings including volume
balance and delay time and to test the speaker settings.
Speaker settings are only active on the Analog Multi-
Channel Output. (See appendix)
– Personal color (Y CB CR connection only)
Allows you to fine-tune saturation, brightness and contrast
of the selected color settings.
– Karaoke vocal
Sound
Put this setting to ON only when a multi-channel karaoke
DVD is being played.The karaoke channels on the disc will
then be mixed into a normal stereo sound.
– Digital output
Factory setting:ALL.This means that both coaxial and
optical outputs are on. If you are not connecting equipment
with a digital input, change the setting to OFF.
If your equipment doesn't include a digital multi-channel
decoder, set the digital output to PCM (Pulse Code
Modulation).
Language
Select the required Menu,Audio and Subtitle language.
Audio language and Subtitle language can also be adapted
using the Menu bar.
Features
– Access Control
Access Control contains the following features:
Child Lock - When Child Lock is set to ON, a 4-digit code
must be entered in order to play discs.
All
Parental control - Allows the conditional viewing of DVDs
containing Parental Control information (see ‘Access
Control’).
– Analog output
Select Stereo, Dolby Surround, 3D Sound (TruSurround) or
multi-channel output to match your system’s playback
capability.
– StatusWindow
Displays the current status of the player and is displayed
with the menu bar. When disc playback is stopped, it is
displayed with the ‘Temporary Feedback Field’ in the default
screen. See ‘On-Screen Display’ information.
The factory setting is ON. Select OFF to suppress display of
the Status Window.
– Night Mode
Optimizes the dynamics of the sound for low volume
playback.
– Bit Rate Indicator
When activated, the bit rate for video and audio as well as
the total bit rate is displayed.This is only applicable during
playback of DVD and SVCD discs.
– Beeper
The beeper can be set to ON or OFF.
15
PREPARATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Loading discs
General features
Note:
1 Press OPEN/CLOSE on the front of the player to open the
disc tray.
– Unless stated, all operations described are based on remote
control use. Some operations can be carried out using the
menu bar on the screen.
2 Load your chosen disc in the tray, label side up (also when a
double sided DVD is inserted).
3 Press OPEN/CLOSE again to close the tray.
G READ appears in the status window and on the player
display, and playback starts automatically.
Moving to another title/track
Ç
É
When a disc has more than one title or
track, you can move to another title as
follows:
Å
á
á
í
ë
Note:
SUBTITLE ANGLE TTL/CHAP AUDIO
T-C
i
– If ‘Child Lock’ is set to ON and the disc inserted is not in the
‘child safe’ list (not authorized), the 4-digit code must be
entered and/or the disc must be authorized (see ‘Access
Control’).
REPEAT REPEAT SHUFFLE SCAN
A-B
¶
¶
PressT-C (TTL/CHAP), then press P
or Obriefly during playback to select the next or to return
to the beginning of the current title/track.
Press Otwice briefly to step back to the previous title/
track.
Playing a DVD and Video CD
disc
Moving to another chapter/index
Ç
É
When a title on a disc has more than one
chapter or a track has more than one
index , you can move to another chapter/
index as follows:
Press Por Obriefly during playback to select the next or
to return to the beginning of the current chapter/index.
Press Otwice briefly to step back to the previous chapter/
index.
Å
á
á
í
ë
Playing a disc
SUBTITLE ANGLE TTL/CHAP AUDIO
i
T-C
REPEAT REPEAT SHUFFLE SCAN
A-B
¶
¶
After inserting the disc and closing the tray, playback starts
automatically and the status window of the player display
shows the type of disc loaded, as well as the disc’s
information and playing time.
The disc may invite you to select an item from a menu. If
the selections are numbered, press the appropriate
numerical key; if not, use the w/v, t/ukeys to highlight
your selection, then press OK.
¶
¶
¶
To go directly to any chapter or index, selectT-C (TTL/
CHAP), then enter the chapter/index number using the
numerical keys (0-9).
¶
¶
The number if the current title and chapter are displayed.
Playback may stop at the end of theTitle, and you may
return to the DVD menu.To go to the next title, press 2.
To stop playback, press 9.
GThe default screen will appear, giving information about
the current status.
You can resume playback from the point at which you
stopped playback. Press 2; when you see the Resume icon
.on the screen, press 2again.
Note:
– For two digit numbers, press the keys in rapid succession.
¶
¶
Slow Motion
á
á
í
ë
SUBTITLE ANGLE TTL/CHAP AUDIO
T-C
i
¶
¶
Select f (SLOW MOTION) in the
menu bar.
Use the wkeys to enter the SLOW
MOTION menu.
REPEAT REPEAT SHUFFLE SCAN
A-B
SLOW
BIT
TIME
ZOOM
Ö
RATE SEARCH
GThe RESUME feature applies not only to the disc in the
player, but also to the last four discs you have played. Simply
reload the disc and press RESUME on the remote control
or; press 2when you see the Resume icon .on the
screen, press 2again.
GThe player will now go into PAUSE mode.
¶
Use the cursor keys tuto select the required speed: -1, -
1/2, -1/4 or -1/8 (backward), or +1/8, +1/4, +1/2 or +1
(forward).
Select 1 to playback at normal speed again.
If ;is pressed, the speed will be set to zero (PAUSE).
To exit slow motion mode, press 2and v.
¶
¶
¶
Note:
– DVDs may be labeled with a region code.
– Your player will not play discs that are labeled with a region
code different from your player.
You can also select Slow Motion speeds by using the H
button on the remote control.
16
OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
á
á
í
ë
Still Picture and Frame-by-frame playback
Repeat A-B
SUBTITLE ANGLE TTL/CHAP AUDIO
T-C
i
REPEAT REPEAT SHUFFLE SCAN
A-B
¶
¶
Select e (PICTURE BY PICTURE)
in the menu bar.
Use the wkey to enter the picture by
picture menu.
GThe player will now go into PAUSE mode.
To repeat a sequence in a title:
Press REPEAT A-B at your chosen starting
point.
É
É
SLOW
BIT
TIME
ZOOM
STOP
PLAY
Ö
¶
¶
RATE SEARCH
Ç
É
Å
á
á
í
ë
G A- appears briefly on the screen.
Press REPEAT A-B again at your chosen end point.
¶
¶
Use the cursor keys tuto select the previous or next
picture frame.
To exit PICTURE BY PICTURE mode, press 2or v.
G A-B REPEAT appears briefly on the display, and the repeat
sequence begins(A-B REPEAT is displayed on the front panel
of the player).
¶
To exit the sequence, press REPEAT A-B.
You can also step forward by pressing ;repeatedly on the
remote control.
Å
á
á
í
ë
Shuffle
SUBTITLE ANGLE TTL/CHAP AUDIO
T-C
i
REPEAT REPEAT SHUFFLE SCAN
A-B
Scan
á
á
í
ë
DVD-Video discs
SLOW
BIT
TIME
ZOOM
SUBTITLE ANGLE TTL/CHAP AUDIO
T-C
This shuffles the playing order of chapters
within a title, if the title has more than
one chapter.
i
Ö
Plays the first 10 seconds of each
chapter/tracks on the disc.
Press SCAN.
To continue playback at your chosen chapter/tracks, press
SCAN again or press 2.
RATE SEARCH
REPEAT REPEAT SHUFFLE SCAN
A-B
SLOW
BIT
TIME
ZOOM
Ö
RATE SEARCH
¶
¶
¶
Press SHUFFLE during playback.
G SHUFFLE appears on the screen for about two
seconds.
¶
¶
To return to normal playback, press SHUFFLE again.
Search
Å
Video CDs
á
á
í
ë
¶
¶
¶
Select g (FAST MOTION) in the
menu bar.
Use the wkey to enter the FAST
MOTION menu.
Use the tukeys to select the required speed: -32, -8 or -4
(backward), or +4, +8, +32 (forward).
Select 1 to play at normal speed again.
Press SHUFFLE during playback.
G SHUFFLE appears on the screen for about two
seconds.
SUBTITLE ANGLE TTL/CHAP AUDIO
T-C
i
REPEAT REPEAT SHUFFLE SCAN
A-B
SLOW
BIT
TIME
ZOOM
Ö
RATE SEARCH
¶
To return to normal playback, press SHUFFLE again.
Å
Time search
¶
¶
á
á
í
ë
SUBTITLE ANGLE TTL/CHAP AUDIO
T-C
To exit FAST MOTION mode, press 2or v.
i
TheTime Search function allows you to
start playing at any chosen time on the
disc.
REPEAT REPEAT SHUFFLE SCAN
A-B
To search forward or backward through different speeds,
you can also hold down Qor R.
SLOW
BIT
TIME
ZOOM
Ö
RATE SEARCH
¶
¶
Select h (TIME SEARCH) in the menu bar.
Press w.
GThe player will now go into PAUSE mode.
G A time edit box appears on the screen, showing the
elapsed playing time of the current disc.
Use the numerical keys to enter the required start time.
Enter hours, minutes and seconds from left to right in the
box.
Å
Repeat
á
á
í
ë
SUBTITLE ANGLE TTL/CHAP AUDIO
T-C
i
DVD-Video Discs - Repeat chapter/
title/disc
To repeat the currently playing chapter,
press REPEAT.
REPEAT REPEAT SHUFFLE SCAN
A-B
SLOW
BIT
TIME
ZOOM
Ö
RATE SEARCH
¶
¶
¶
G REPEAT CHAPTER appears on the display.
To repeat the title currently playing , press REPEAT a
second time.
G Each time an item has been entered, the next item will
be highlighted.
G REPEAT TITLE appears on the display.
To repeat the entire disc, press REPEAT a third time.
G REPEAT appears on the display.
¶
Press OK to confirm the start time.
GThe time edit box will disappear and playback starts
from the selected time on the disc.
¶
¶
To exit Repeat mode, press REPEAT a fourth time.
Video CDs - Repeat track/disc
¶
¶
¶
To repeat the track currently playing , press REPEAT.
G REPEAT TRACK appears on the display.
To repeat the entire disc, press REPEAT a second time.
G REPEAT appears on display and screen.
To exit Repeat mode, press REPEAT a third time.
17
OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Å
á
á
í
ë
Zoom
FTS-Video
SUBTITLE ANGLE TTL/CHAP AUDIO
T-C
i
REPEAT REPEAT SHUFFLE SCAN
A-B
The Zoom function allows you to enlarge
the video image and to move through
the enlarged image.
¶
The FTS-Video function allows you to store your favorite
titles and chapters (DVD) and favorite tracks and indexes
(VCD) for a particular disc in the player memory.
FTS program can contain 20 items (titles, chapters).
A programmed FTS will be placed on top of the list when
playback is activated.When the list is full, a new program
will replace the last program on the list.
SLOW
BIT
TIME
ZOOM
Ö
RATE SEARCH
¶
¶
Select a (ZOOM).
¶
¶
Press w/vto activate the ZOOM function and select the
required zoom factor: 1.33, 2 or 4.
GThe player will go into Pause mode.
GThe selected zoom factor appears below the Zoom icon
in the menu bar and ‘Press OK to pan’ appears below the
menu bar.
¶
The selections can be chosen and played at any time.
Storing a FTS-Video Program
GThe picture will change accordingly.
Press OK to confirm the selection.
GThe panning icons appear on the screen.
Use the tuwvkeys to move across the screen.
When OK is pressed, only the zoomed picture will be
shown on the screen.
¶
¶
¶
When playback is stop, select VIDEO FTS c in the menu
bar.
Press wto open the menu.
GThe VIDEO FTS menu appears.
Press uor tor FTS to select ON or OFF.
¶
¶
¶
¶
To exit ZOOM mode:
– Press 2 to resume playback, STOP or SYSTEM
MENU.
Storing titles/tracks
¶
¶
¶
Press wto select TITLES.
Use uand tto select the required title.
Press OK if you wish to store the entire title.
GThe title number will be added to the list of selections.
Easy Jog
EASY JOG consists of JOG and SHUTTLE control
which allows you to playback in various steps:
Storing chapters/indexes
¶
¶
In playback mode - search forward/backward within a
chapter/index or move to the next/previous chapter/index.
G SHUTTLE control: +4x, +8x, +32x, Next (clockwise
direction), -4x, -8x, -32x, Previous (anti-clockwise direction).
In pause mode - change playback speed or select next/
previous frame-by-frame picture.
G SHUTTLE control: +1/8x, +1/4x, +1/2x, (clockwise
direction), -1/8x, -1/4x, -1/2x, (anti-clockwise direction).
G JOG control: to select Next Picture Frame (clockwise
direction), or Previous Picture Frame (anti-clockwise
direction).
¶
Press won the selected title number.
GThe title number will be marked and the highlight moves
to the first available chapter number for this title.
Use uand tto select the required chapter.
Press OK to confirm the selection.
GThe title/chapter selection will be added to the list of
selections.
¶
¶
¶
¶
Press SYSTEM MENU to exit the VIDEO FTS c menu.
Erasing a FTS-Video Program
When playback is stop, select VIDEO FTS c in the menu
bar.
PLAY/PAUSE STOP
SOUND
¶
¶
¶
¶
Use wto select PROGRAM.
Use uand tto select the required number.
Press OK to erase the selection.
Press SYSTEM MENU to exit.
JOG
SHUTTLE
OPEN/CLOSE
EASY JOG
If you wish to erase all selections:
¶
When playback is stop, select VIDEO FTS c in the menu
bar.
¶
¶
Use wto select CLEAR ALL.
Press OK.
G All selections will now be erased.
Press SYSTEM MENU to exit.
¶
18
OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Special DVD features
Special VCD Features
Checking the contents of DVD-Video discs:
Menus
Playback Control (PBC)
¶
¶
Load aVideo CD with PBC and press 2.
Go through the menu with the keys indicated on theTV
screen until your chosen passage starts to play. If a PBC
menu includes titles, you can select a title directly.
Enter your choice with the numerical keys (0-9).
Press RETURN to go back to the previous menu.
You may also set to PBC OFF under Personal
Preferences.
DVDs may contain menus to access special features.To use
the disc menu, press the appropriate numerical key; or, use
the w, v, u, tkeys to highlight your selection, then press
OK.
¶
¶
¶
Title menus
¶
Press DISC MENU.
G If the current title has a menu, the menu will appear on
the screen. Otherwise, the disc menu will be displayed.
The menu can list camera angles, spoken language and
subtitle options, and chapters for the title.
Playing an audio CD
¶
¶
¶
¶
¶
After loading the disc, playback starts automatically.
If theTV is on, the Audio CD screen appears.
The number of tracks and the total playing time of the disc
will be shown on the screen.
During playback, the current track number and its elapsed
playing time will be shown on the screen and on the player
display.
To remove the title menu, press DISC MENU again.
Disc menu
4
5
8
0
6
¶
9
SYSTEM
MENU
7
DISC
MENU
¶
¶
PressT-C, then press DISC MENU.
GThe disc menu is displayed.
To remove the disc menu, pressT-C, then
press DISC MENU.
RETURN
OK
¶
¶
Playback will stop at the end of the disc.
To stop playback at any other time, press 9.
Camera Angle
If the disc contains sequences recorded from different
camera angles, the angle icon appears, showing the number
of available angles and the angle being shown currently.You
can then change the camera angle if you wish.
Use the w/vkeys to select the required angle icon.
G After a while, playback changes to the selected angle.The
angle icon remains displayed until multiple angles are no
longer available.
¶
Pause
É
É
ë
STOP
PLAY
¶
¶
Press ;during playback.
To return to playback, press 2.
Ç
É
Å
á
á
í
Search
Å
á
á
í
ë
SUBTITLE ANGLE TTL/CHAP AUDIO
T-C
Changing the audio language
¶
To search forward or backward through
the disc at four times the normal speed,
hold down 5or 6for about one
second during playback.
i
REPEAT REPEAT SHUFFLE SCAN
A-B
SLOW
BIT
TIME
ZOOM
¶
¶
Select Y (AUDIO) in the menu bar.
Press Y or w/vrepeatedly to see the different languages.
Ö
RATE SEARCH
G Search begins, and sound is partially muted.
¶
To step up to eight times the normal speed, press 5or 6
again.
G Search goes to eight times the speed, and the sound is
muted.
To return to four times the normal speed, press 5or 6
again.
If theTV is on, search speed and direction are indicated on
the screen each time 5or 6is pressed.
To end the search, press 2to resume playback or 9to stop
playback.
Subtitles
¶
¶
¶
¶
¶
Select Z (SUBTITLE) in the menu bar.
Press Z or w/vrepeatedly to see the different subtitles.
19
OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Å
á
á
í
ë
Moving to another track
FTS Program
SUBTITLE ANGLE TTL/CHAP AUDIO
T-C
i
REPEAT REPEAT SHUFFLE SCAN
A-B
¶
Press Por Obriefly during playback to
go to the next track or to return to the
beginning of the current track.
Press Otwice briefly to step back to the previous track.
To go directly to any track, enter the track number using
the numerical keys (0-9).
¶
¶
FTS Program allows you to store your favorite tracks for a
particular disc in the player memory.
Each FTS Program can contain 20 tracks.
SLOW
BIT
TIME
ZOOM
Ö
RATE SEARCH
¶
¶
Å
á
á
í
ë
SUBTITLE ANGLE TTL/CHAP AUDIO
T-C
Shuffle
i
REPEAT REPEAT SHUFFLE SCAN
A-B
¶
¶
Press SHUFFLE during playback.
GThe order of the tracks is changed.
To return to normal playback, press SHUFFLE again.
SLOW
BIT
TIME
ZOOM
Ö
RATE SEARCH
Å
Storing an FTS Program
á
á
í
ë
Repeat track/disc
SUBTITLE ANGLE TTL/CHAP AUDIO
T-C
i
1 Load a disc and stop playback.
2 Use wto go to the list of available tracks.
REPEAT REPEAT SHUFFLE SCAN
A-B
¶
To repeat the track currently playing,
press REPEAT.
SLOW
BIT
TIME
ZOOM
Ö
RATE SEARCH
G REPEAT TRACK appears on the display.
To repeat the entire disc, press REPEAT a second time.
G REPEAT appears on the display.
3 Use uor tto select tracks from the list.
To go directly to any track, enter the track number using
the numerical keys (0-9).
¶
¶
To exit Repeat mode, press REPEAT a third time.
4 Store each track by pressing OK.
GThe track numbers will be added to the list.
GThe number of tracks and the playing time of the
program will be shown on the screen and the player display.
á
á
í
ë
Repeat A-B
SUBTITLE ANGLE TTL/CHAP AUDIO
T-C
i
REPEAT REPEAT SHUFFLE SCAN
A-B
To repeat a sequence:
Press REPEAT A-B at your chosen starting
point.
SLOW
BIT
TIME
ZOOM
Ö
¶
¶
¶
RATE SEARCH
When your FTS Program is complete, press 2to start
playback or vto stop playback. In either case, the FTS
Program will be automatically memorized.
G A- appears on the player display.
Press REPEAT A-B again at your chosen end point.
G A-B appears on the display, and the sequence begins to
play repeatedly.
To exit the sequence and return to normal play, press
REPEAT A-B again.
Switching FTS ON/OFF
1 Use vwto move to the FTS ON/OFF selection.
2 Use uor tto select either ON or OFF.
Erasing a track from an FTS Program
Scan
á
á
í
ë
SUBTITLE ANGLE TTL/CHAP AUDIO
T-C
1 Use wto go to the list of selected tracks.
2 Use uand tto select the track number you wish to erase.
i
Plays the first 10 seconds of each track
on the disc.
Press SCAN.
REPEAT REPEAT SHUFFLE SCAN
A-B
SLOW
BIT
TIME
ZOOM
Ö
RATE SEARCH
3 Press OK.
¶
¶
To continue playback at your chosen chapter/track, press
GThe track number will be erased from the list of selected
SCAN again or press 2.
tracks.
Erasing the complete program
1 Use wto select CLEAR ALL, then press OK.
GThe complete FTS Program for the disc will be erased.
20
OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Access Control
Access control; child lock
(DVD and VCD)
Activating/deactivating the child lock
1 When disc playback is stopped, select ACCESS
CONTROL in the features menu using the w/vkeys.
¶
Alternatively, you can press DISC LOCK on the remote
control if the child lock has been activated.
Choose 'Play always' to remove the disk from the
child-safe list
2 Enter a 4-digit code of your own choice.
3 Enter the code a second time.
4 Move to “CHILD LOCK” using the w/vkeys.
5 Move to LOCK/UNLOCK using the ukey.
6 Select LOCK using the w/vkeys.
Deauthorizing discs
¶
¶
Insert the disc. See ‘Loading discs’.
G Playback starts automatically.
Press 9while { is visible.
7 Press OK or tto confirm, then press tagain to exit the
GThe | will appear and the disc is now deauthorized.
menu.
G Now unauthorized discs will not be played unless the
4-digit code is entered.
8 Select UNLOCK to deactivate the CHILD LOCK.
Access control; Parental
control (DVD only)
Note: Confirmation of the 4-digit code is necessary when:
– The code is entered for the very first time (see above),
– The code is changed (see ‘Changing the 4-digit code’),
– The code is cancelled (see ‘Changing the 4-digit code’).
Movies on DVDs may contain scenes not suitable for
children.Therefore, discs may contain ‘Parental Control’
information which applies to the complete disc or to
certain scenes on the disc.These scenes are rated from 1
to 8, and alternative, more suitable scenes are available on
the disc. Ratings are country dependent.The ‘Parental
Control’ feature allows you to prevent discs from being
played by your children or to have certain discs played with
alternative scenes.
Authorizing discs
¶
Insert the disc. See ‘Loading discs’.
GThe ‘child protect’ dialog will appear.
You will be asked to enter your 4-digit code for ‘Playback
Once’ or ‘Playback Always.’ If you select ‘Playback Once’, the
disc can be played as long as it is in the player and the
player is ON. If you select ‘Playback Always’, the disc will
become child safe (authorized) and can always be played,
even if the Child Lock is set to ON.
Notes:
– The player memory maintains a list of 120 authorized
(‘Child safe’) disc titles.A disc will be placed in the list when
‘Playback Always’ is selected in the ‘child protect’ dialog.
– Each time a ‘child safe’ disc is played, it will be placed on
top of the list.When the list is full and a new disc is added, the
last disc in the list will be removed from the list.
– Double sided DVDs may have a different ID for each side. In
order to make the disc ‘child safe’, each side has to be
authorized.
– Multi-volume VCDs may have a different ID for each
volume. In order to make the complete set ‘child safe’, each
volume has to be authorized.
21
ACCESS CONTROL
Download from Www.Somanuals.com. All Manuals Search And Download.
Activating/Deactivating Parental Control
Changing the 4-digit code
1 When disc playback is stopped, select ACCESS
CONTROL in the features menu using the w/vkeys.
2 Enter your 4-digit code. If necessary, enter the code a
second time.
3 Move to Parental Level using the w/vkeys.
4 Move to VALUE ADJUSTMENT (1-8) using the ukey.
5 Then use the w/vkeys or the numerical keys on the
remote control to select a rating from 1 to 8 for the disc
inserted.
1 When disc playback is stopped, select ACCESS
CONTROL in the features menu using the w/vkeys.
2 Enter the old code.
3 Move to CHANGE CODE using the wkey.
4 Press the ukey.
5 Enter the new 4-digit code.
6 Enter the code a second time and reconfirm by pressing
OK.
7 Press tto exit the menu.
Rating 0 (displayed as ‘– –’):
Parental Control is not activated.The Disc will be played in
full.
If you forget your 4 digit code
1 Press 9to exit ‘Child Protect’ screen.
Ratings 1 to 8:
2 Select ACCESS CONTROL in the features menu using
The disc contains scenes not suitable for children. If you set
a rating for the player, all scenes with the same rating or
lower will be played. Higher rated scenes will not be played
unless an alternative is available on the disc.The alternative
must have the same rating or a lower one. If no suitable
alternative is found, playback will stop and the 4-digit code
has to be entered.
the w/vkeys.
3 The 4-digit code can be cancelled by pressing 9four times
in the ‘Access Control’ dialog.
4 You can then enter a new code (twice!) as described above
(Changing the 4 digit code).
Parental Control Disclaimer
6 Press OK or tto confirm, then press tagain to exit the
menu.
This DVD player features the PARENTAL CONTROL
system which is intended to be active when playing DVD
discs with certain software coding.This is according to
technical standards adopted by the set maker and disc
content industries.
Please note that the PARENTAL CONTROL system
will not operate a DVD which does not have with the
appropriate software coding.Also note that at the time of
release of this DVD player, certain aspects of the technical
standards had not been settled between set makers and
the disc industries.
On this basis Philips cannot guarantee the functioning of
PARENTAL CONTROL and denies any liability
associated with unintended watching of disc content.
If in doubt, please make sure the disc plays according to
your PARENTAL CONTROL settings before you allow
children access.
Country
1 When disc playback is stopped, select ACCESS
CONTROL in the features menu using the w/vkeys.
2 Enter the 4-digit code.
3 Move to CHANGE COUNTRY using the wkey.
4 Press the ukey.
5 Select a country using w/v.
6 Press OK or tto confirm, then press tagain to exit the
menu.
22
ACCESS CONTROL
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Requesting Service
If it appears that the DVD-Video player is faulty, first consult this checklist. It may be that something has been overlooked. Under
no circumstances should you attempt to repair the system yourself; this will invalidate the warranty.
Look for the specific symptom(s).Then perform only the actions listed to remedy the specific symptom(s).
Symptom
Remedy
No power
– Make sure the mains cord (AC) is properly connected.
– Check if there is power at the AC outlet by plugging in another appliance.
No picture
– Check if theTV is switched on.
– Check the video connection.
Distorted picture
– Check the disc for fingerprints and clean with a soft cloth, wiping from center
to edge.
– Sometimes a small amount of picture distortion may appear .This is not a
malfunction.
Completely distorted picture
or no color with player menu.
– If the picture is distorted completely or if the picture rolls vertically,
make sure the NTSC/PAL setting at the DVD player matches the video
signal of your television.
– If yourTV video signal is NTSC, select the NTSC setting at the DVD player.
– If your video signal is PAL, select the PAL setting - see NTSC/PAL SETTINGS.
Distorted or Black/White picture
with DVD orVideo CD.
– The disc format does not match yourTV’s video signal (PAL/NTSC).
No sound
– Check audio connections.
– If you are using a HiFi amplifier, try another sound source.
Distorted sound from HiFi
amplifier.
– Check to make sure that no audio connections are made to the amplifier
phono input.
No audio at digital output.
– Check the digital connections.
– Check the settings menu to make sure the digital output is set to ALL or
PCM.
– Check if the audio format of the selected audio language matches your
receiver capabilities.
Disc can’t be played.
– Ensure the disc label is facing up.
– Clean the disc.
– Check if the disc is defective by trying another disc.
– Check to see if the disc is defective, badly scratched or warped (not flat)
No return to start-up screen when
disc is removed.
– Reset by switching the player off, then on again.
– Check to see if the program requires another disc to be loaded.
The player does not respond to
the remote control.
– Aim the remote control directly at the sensor on the front of the player.
– Remove any obstacles between the player and the remote control.
– Inspect or replace the batteries in the remote control.
Buttons do not work.
– In order to completely reset the player, unplug the AC cord from the AC
outlet. (Please ensure that the set is not in Initial Setup mode)
Player does not respond to some
operating commands during
playback.
– Operations may not be permitted by the disc. Refer to the instructions of
the disc.
DVD-Video player cannot read
CDs/DVDs
– Use a commonly available cleaning CD/DVD to clean the lens before
sending the DVD-Video player for repaired.
23
Download from Www.Somanuals.com. All Manuals Search AndBDoEwFnOloaRdE. REQUESTING SERVICE
Appendix
Delay times
Speaker Settings
The DVD player is set to reproduce correctly synchronized
Digital Surround Sound in a listening area where the
surround speakers are about 150cm nearer to the listening
position than the front speakers, and the center speaker is
in line with the front speakers.To adjust for other listening
area arrangements, adapt delay times according to the
following instructions:
6 Channel settings
Front speaker
L (Large): When the front speakers can reproduce
low frequency signals below 120Hz
S (Small): When the front speakers cannot produce
low frequency signals below 120Hz
Digital Surround
Center Speaker*
Measure the distances in centimeters from the front
speaker and the surround speaker to the listening
positioning.
L (Large): When the center speaker can reproduce
low frequency signals below 120Hz
S (Small): When the center speaker cannot produce
low frequency signals below 120Hz
Subtract the surround distance from the front distance and
divide by 30.The result is the required Surround Channel
delay time in milliseconds.
Off:
When the center speaker is not connected
If the center speaker is in line with the front speaker, no
center speaker delay is needed. If, however, it is nearer the
listening position, measure the distance in centimeters
between the front and center speaker planes, and divide by
30.The result is the required Center Channel delay time in
milliseconds.
Surround speakers
L (Large): When the surround speakers can
reproduce low frequency signals below
120Hz
S (Small): When the surround speakers cannot
produce low frequency signals below
120Hz
Digital Surround Delay
10
5
ms ms
0 ms
0 ms
0 ms
0 ms
-5 ms
-10 ms
40
35
30
25
20
15
10
5
Off:
When the surround speakers are not
connected
0 ms
0 ms
0 ms
5 ms
10 m
15 m
15 m
15 ms
Subwoofer
Differential
arrival time
On:
Off:
When you connect a subwoofer
When a subwoofer is not connected
0
Preferred
0
5
10 15 20 25 30 35 40
Acceptable
Not recommended
Distance from front speakers (feet)
Note:
– Certain speaker settings are prohibited by the Dolby Digital
licensing agreement.
Center
speaker
Front speaker
left
Front speaker
right
TV
Rear speaker
(left surround)
Rear speaker
(right surround)
24
APPENDIX
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
PLAYBACK SYSTEM
DVD-Video
Video CD
CONNECTIONS
Y Output
CB (U) Output
Cinch (green)
Cinch (blue)
CD (CD-R and CD-RW)
DVD+RW
CR (V) Output
S-Video Output
Video Output
Audio L+R output
6 Channel Analog Output
Audio Front Left/Right
Audio Surround Left/Right
Audio Center
Cinch (red)
Mini DIN, 4 pins
Cinch (yellow)
Cinch (white/red)
OPTICAL READOUT SYSTEM
Lasertype
Numerical Aperture
Semiconductor AlGaAs
0.60 (DVD)
0.45 (VCD/CD)
650 nm (DVD)
780 nm (VCD/CD)
Cinch (white/red)
Cinch (white/red)
Cinch (blue)
Cinch (black)
Wavelength
Audio Subwoofer
Digital Output
1 coaxial, 1 optical
DVD DISC FORMAT
Medium
Diameter
Playing time
(12cm)
IEC958 for CDDA / LPCM
IEC1937 for MPEG1/2, Dolby Digital and DTS
6.3 mm Jack
Optical Disc
12cm (8cm)
One layer
Dual layer
Two side
Single layer
Two side
Dual layer
Headphone
2.15 h*
4 h*
4.30 h*
CABINET
Dimensions (w x h x d)
17.12 x 3.94 x 12.64 inch
435 x 100 x 321mm
Approx. 8.8 pounds
Approx. 4 Kg
8 h*
Weight
VIDEO FORMAT
DA Converter
GENERAL FUNCTIONALITY
Stop / Play / Pause
10 bits
Signal handling
Digital Compression
Components
MPEG2 for DVD,
MPEG1 forVCD
Fast Forward / Backward
Time Search
Step Forward / Backward
Slow Motion
TV STANDARD
Number of lines
Playback
(PAL/50Hz)
625
Multistandard
(NTSC/60Hz)
525
(PAL/NTSC)
Title / Chapter /Track Select
Skip Next / Previous
Repeat (Chapter /Title / All) or (Track / All)
A-B Repeat
DVD
Shuffle
Horiz. Resolution
Vertical Resolution
720 pixels
576 lines
720 pixels
480 lines
Scan
Enhanced ease of use graphical interface
Perfect Still with digital multi-tap filter
Zoom (xl.33, x2. x4) with picture enhancement
Smart Picture (Personal Colour Settings)
3D Sound (TruSurround)
5.1 Channels user defined speaker settings
Easy Jog
VCD
Horiz. Resolution
Vertical Resolution
352 pixels
288 lines
352 pixels
240 lines
VIDEO PERFORMANCE
Video output
S-Video output
1Vpp into 75 ohm
Audio and video bit rate indicator
Beeper
Y: 1Vpp into 75 ohm
C: 0.3Vpp into 75 ohm
Y: 1Vpp into 75 ohm
Y CB CR (YUV) output
DVD FUNCTIONALITY
CB CR: 0.7Vpp into 75 ohm
On/Off
Left/Right
Multi-angle Selection
Black Level Shift
Video Shift
Audio Selection (1 out of max. 8 languages)
Subtitles Selection (1 out of max. 32 languages)
Aspect Ratio conversion (16:9, 4:3 Letterbox, 4:3 Pan Scan)
Parental Control and Disk Lock
AUDIO FORMAT
Digital
MPEG
DTS/Dolby Digital
PCM
Compressed Digital
Disc Menu support (Title Menu and Access Control)
Resume (5 discs) after stop / standby
ProgrammingTitles/chapters with Favorite Selection
16, 20, 24 bits
fs, 44.1, 48, 96 kHz
Analog Sound Stereo
VIDEO CD FUNCTIONALITY
Playback Control forVCD 2.0 discs
Disc Lock
Resume (5 discs) after stop / standby
ProgrammingTracks with Favorite Selection
Dolby Pro Logic downmix from Dolby Digital multi-channel sound
Full decoding of Dolby Digital multi-channel surround sound
3D Sound (TruSurround) for virtual 5.1 channel sound on 2 speakers
AUDIO PERFORMANCE
DA Converter
DVD
24 bits
AUDIO CD FUNCTIONALITY
fs 96 kHz
fs 48 kHz
fs 44.1 kHz
fs 44.1 kHz
4 Hz - 44 kHz
4 Hz - 22 kHz
4 Hz - 20 kHz
4 Hz - 20 kHz
103 dB
100 dB
113 dB
92 dB
Time Display (Total /Track / RemainingTrackTime)
Full audio functionality with remote control
Programming with FavoriteTrack Selection
Video CD
CD
Signal-Noise (1kHz)
Dynamic Range (1kHz)
Crosstalk (1kHz)
Distortion and Noise (1kHz)
Headphone
Specifications subject to change without prior notice
30mW at 32 Ohm load,
headphone imp. 8-2k Ohm
*
typical playing time for movie with 2 spoken languages and 3 subtitle languages.
25
SPECIFICATIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
|