Portable CD Player
Audio
AX5210,AX5211,AX5212,AX5214,AX5215
AX5216,AX5217,AX5218,AX5219
Need help? Call us!
Return
Philips representatives are ready to help you
with any questions about your new product.
yourWarranty
Registration Card
within 10 days
CALL US BEFORE YOU CONSIDER
RETURNING THE PRODUCT!
Y
1-800-531-0039
ownload from Www.Somanuals.com. All Manuals Search And Downloa
6
5
4
2
7
8
3
9
0
1
%
$
#
!
@
^
&
+
+
1
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK START
MISE EN SERVICE RAPIDE
ENCENDIDO RAPIDO
p
1
-
-
+
+
-
3
4
#
HOLD ➟ OFF
5
PLAY 2;
6 VOL
!!!
nload from Www.Somanuals.com. All Manuals Search And Down
2
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
10.
Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer or sold with the apparatus.
When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
4. Follow all instructions.
11. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such as if
the power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, or when the apparatus has been
exposed to rain or moisture, does not operate normally, or has been
dropped.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in
accordance with the manufacturers instructions.
12. Battery usage
CAUTION
–To prevent battery leakage which
8. Do not install near any heat sources such as radiators, heat regis-
may result in bodily injury, property damage or damage to the unit:
ters, stoves, or other apparatus (including amplifiers) that produce heat.
G
G
Install ALL batteries correctly, + and - as marked on the unit.
9. Only use attachments/accessories specified by the manufacturer.
Do not mix batteries (OLD and NEW or CARBON and
ALKALINE, etc.).
G
Remove batteries when the unit is not used for a long time.
EL 6474-E004: 02/8
Download from Www.Somanuals.com. All Manuals Search And Download.
Return your Warranty Registration card today to
ensure you receive all the benefits you’re entitled to.
• Once your Philips purchase is regis-
tered, you’re eligible to receive all the
privileges of owning a Philips product.
• So complete and return theWarranty
Registration Card enclosed with your
purchase at once, and take advantage
of these important benefits.
Warranty
Owner
Model
Verification
Confirmation
Registration
Registering your product Your completed
Returning yourWarranty
Registration Card right
away guarantees you’ll
within 10 days confirms
your right to maximum
protection under the
terms and conditions of
your Philips warranty.
Warranty Registration
Card serves as verifica-
tion of ownership in the receive all the information
event of product theft
or loss.
and special offers which
you qualify for as the
owner of your model.
Know sthaesefety
symbols
For Customer Use
Enter below the Serial No. which is
located on the rear of the cabinet. Retain
this information for future reference.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Model No. _____________________
Serial No. ______________________
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This “bolt of lightning”
indicates uninsulated material
within your unit may cause an
electrical shock. For the safety of
everyone in your household, please
do not remove product covering.
WARNING: TO PREVENT FIRE
OR SHOCK HAZARD, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN
OR MOISTURE.
CAUTION: To prevent electric
shock, match wide blade of plug to
wide slot, and fully insert.
The “exclamation point” calls
attention to features for which
you should read the enclosed litera-
ture closely to prevent operating and
maintenance problems.
wnload from Www.Somanuals.com. All Manuals Search And Downlo
MAC5097
LIMITED WARRANTY
PORTABLE COMPACT DISC
OneYear Free Exchange
This product must be carried in for an exchange.
WHO IS COVERED?
You must have proof of purchase to exchange the product.A sales receipt or other doc-
ument showing that you purchased the product is considered proof of purchase.Attach it
to this owner’s manual and keep both nearby.
WHAT IS COVERED?
Warranty coverage begins the day you buy your product. For one year thereafter, a
defective or inoperative product will be replaced with a new, renewed or comparable
product at no charge to you.A replacement product is covered only for the original war-
ranty period.When the warranty on the original product expires, the warranty on the
replacement product also expires.
WHAT IS EXCLUDED?
Your warranty does not cover:
•
•
•
•
labor charges for installation or setup of the product, adjustment of customer controls
on the product, and installation or repair of antenna systems outside of the product.
product repair and/or part replacement because of misuse, accident, unauthorized repair
or other cause not within the control of Philips.
reception problems caused by signal conditions or cable or antenna systems outside
the unit.
a product that requires modification or adaptation to enable it to operate in any coun-
try other than the country for which it was designed, manufactured, approved and/or
authorized, or repair of products damaged by these modifications.
incidental or consequential damages resulting from the product. (Some states do not
allow the exclusion of incidental or consequential damages, so the above exclusion may
not apply to you.This includes, but is not limited to, prerecorded material, whether
copyrighted or not copyrighted.)
•
•
a product that is used for commercial or institutional purposes.
WHERE IS EXCHANGE AVAILABLE?
You may exchange the product in all countries where the product is officially distributed
by Philips. In countries where Philips does not distribute the product, the local Philips
service organization will attempt to provide a replacement product (although there may
be a delay if the appropriate product is not readily available).
Philips, P.O. Box 520890, Miami,
FL 33152, USA,
(402) 536-4171
BEFORE REQUESTING EXCHANGE...
Please check your owner's manual for assistance. If you have additional questions, call us
at 1-800-531-0039.
EXCHANGING A PRODUCT IN U.S.A.,
PUERTO RICO, OR U.S.VIRGIN ISLANDS...
Contact 1-800-531-0039 to arrange an exchange. Or, ship the product, insured and
freight prepaid, and with proof of purchase enclosed, to the address listed below.
Philips Exchange Program
Suite A
406 North Irish Street
Greeneville TN 37745
(In U.S.A., Puerto Rico, and U.S.Virgin Islands, all implied warranties, including implied war-
ranties of merchantability and fitness for a particular purpose, are limited in duration to
the duration of this express warranty. But, because some states do not allow limitations
on how long an implied warranty may last, this limitation may not apply to you.)
EXCHANGING A PRODUCT IN CANADA...
Please contact Philips at:
1-800-661-6162 (French Speaking)
1-800-531-0039 (English or Spanish Speaking)
(In Canada, this warranty is given in lieu of all other warranties. No other warranties are
expressed or implied, including any implied warranties of merchantability or fitness for a
particular purpose. Philips is not liable under any circumstances for any direct, indirect,
special, incidental or consequential damages, howsoever incurred, even if notified of the
possibility of such damages.)
REMEMBER...
Please record below the model and serial numbers found on the product.Also, please fill
out and mail your warranty registration card promptly. It will be easier for us to notify
you if necessary.
MODEL #
SERIAL #
____________________________________
____________________________________
This warranty gives you specific legal rights.You may have other rights
which vary from state/province to state/province.
EL4967E007 / 8-02
wnload from Www.Somanuals.com. All Manuals Search And Downlo
El aparato cumple las normas FCC, Parte 15 y 21 CFR 1040.10. Funcionamiento
dependiente de dos condiciones siguientes:
1. Este aparato no puede provocar interferencia dañina, y
2. Este aparato debe aceptar cualquier interferencia recibida, incluyendo las
interferencias que pueden provocar un funcionamiento insuficiente.
CAUTION
Use of controls or adjustments or performance of pro-
cedures other than herein may result in hazardous radi-
ation exposure or other unsafe operation.
L’appareil répond aux normes FCC, Part 15 et 21 CFR 1040.10. Fonctionnement
soumis aux deux conditions suivantes :
1. Cet appareil ne doit pas provoquer d’interférences nuisibles, et
2. Cet appareil doit accepter toute interférence reçue, y compris les
interférences susceptibles de provoquer un fonctionement peu satisfaisant.
ATTENTION
L’utilisation de commandes ou de réglages ou l’exécution
de procédures autres que celles décrites dans le présent
manuel risque d’entraîner une exposition à un rayon-
nement dangereux ou d’avoir d’autres conséquences sur
la sécurité.
The set complies with the FCC-Rules, Part 15 and with 21 CFR 1040.10.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
PRECAUCIÓN
La utilización de controles o ajustes y la realización de
procedimientos distintos de los contenidos en este
manual pueden provocar la exposición a radiaciones
peligrosas y a otros peligros.
Canada
English: This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the Radio Interference Regulations
of the Canadian Department of Communications.
Français : Cet appareil numérique n'émet pas de bruits radioélectriques dépas-
sant les limites applicables aux appareils numériques de Classe B prescrites dans
le Règlement sur le Brouillage Radioélectrique édicté par le Ministère des
Download from Www.Somanuals.com. All Manuals Search And Download.
Communications du Canada.
POWER SUPPLY / GENERAL INFORMATION
English
CONTROLS / POWER SUPPLY
Average playing time of batteries under normal conditions
C
ONTROLS ( see figure
1
)
Battery type
Normal AA
Normal AAA
Alkaline AA
Alkaline AAA
ESP on
5 hours
3 hours
18 hours
8 hours
Power Save
9 hours
1 LINE OUT/p........3.5 mm headphone socket, socket to connect the player to
another audio input of an additional appliance, remote
control socket (not on all versions)
2 2; ......................switches the player on, starts or pauses CD play
3 ∞ .......................skips and searches CD tracks backwards
4 § .......................skips and searches CD tracks forwards
5 hours
33 hours
15 hours
Batteries contain chemical substances, so they should be disposed of
properly.
5 MODE .................selects the different playing possibilities: shuffle,
shuffle repeat all, repeat, repeat all and SCAN
6 PROGRAM ..........programs tracks and reviews the program
7 ............................display
8 9.........................stops CD play, clears a program or switches the player off
9 DBB.....................switches the bass enhancement on and off. This button also
switches acoustic feedback (the beep) on/off when it is pres-
sed for more than 2 seconds
0 VOL +/−..............adjusts the volume
! 4.5V DC...............socket for external power supply
@ OPEN 2 ..............opens the CD lid
Mains adapter (supplied or optionally available)
Use only the AY 3170 adapter (4.5 V / 300 mA direct
current, positive pole to the center pin). Any other product
may damage the player.
1
Make sure the local voltage corresponds to the power
adapter’s voltage.
4.5
V
D
C
2
Connect the power adapter to the 4.5V DC jack of the
player and to the wall outlet.
Note: Always disconnect the adapter when you are not using it.
# ESP ON / OFF .....ELECTRONIC SKIP PROTECTION ensures continuous CD
playback regardless of vibrations and shocks
$ OFF......................switches RESUME and HOLD off
RESUME .............stores the last position of a CD track played
HOLD...................locks all buttons
% ............................typeplate
^ ............................battery compartment
& ............................AAA battery door
Environmental information
•
All redundant packing material has been omitted. We have done our utmost to
make the packaging easily separable into two materials: cardboard (box) and
polyethylene (bags, protective foam sheet).
•
Your set consists of materials which can be recycled if disassembled by a
specialized company. Please observe the local regulations regarding the
disposal of packing materials, dead batteries and old equipment.
Batteries (supplied or optionally available)
CD player and CD handling
You can use the following batteries with this CD-player:
•
Do not touch the lens A of the CD player.
•
•
•
•
Do not expose the unit, batteries or CDs to humidity,
rain, sand or excessive heat (caused by heating
•
alkaline batteries type AAA (LR03, UM4) or AA (LR6, UM3) preferably
Philips).
equipment or direct sunlight).
Notes:– Old and new or different types of batteries should not be combined.
– Remove batteries if they are empty or if the player is not going to be used for
a long time.
You can clean the CD player with a soft, slightly
dampened, lint-free cloth. Do not use any cleaning
agents as they may have a corrosive effect.
To clean the CD, wipe it in a straight line from the
Inserting AAA (LR03, UM4) batteries
center toward the edge using a soft, lint-free cloth. A cleaning agent may
damage the disc! Never write on a CD or attach a sticker to it.
The lens may cloud over when the unit is moved suddenly from cold to warm
surroundings. Playing a CD is not possible then. Leave the CD player in a warm
environment until the moisture has evaporated.
1
2
Open the AAA battery door.
+
+
/UM4
Insert AAA batteries as shown onto the back of the
LR03/AAA
door.
3
Replace the battery-loaded AAA door back onto the
•
•
Active mobile phones in the vicinity of the CD player may cause malfunctions.
Avoid dropping the unit as this may cause damage.
set.
AAA (LR03, UM4)
Inserting AA (LR6, UM3) batteries
Headphones
To double playback time, insert AA batteries into the
battery compartment and use the AA marked battery
door.
-
•
Connect the supplied headphones to the LINE OUT/p
jack of the player.
+
A
LR
A
6
S
/
IZ
U
E
M
+
3
-
•
Open the battery compartment and insert either 2
normal or alkaline batteries.
Note: LINE OUT/p can also be used for
connecting this set to your HiFi system.To adjust the
sound and volume, use the controls on the connected
audio equipment and on the CD player.
AA (LR6, UM3)
Battery indication
The approximate power level of your batteries is shown in the display.
Battery full
IMPORTANT!
Battery two-thirds full
Hearing safety: Do not play your headphones at a high volume. Hearing experts
advise that continuous use at high volume can permanently damage your hearing.
Traffic safety: Do not use headphones while driving a vehicle. It may create a
hazard and it is illegal in many countries. Even if your headphones are an open-air
type designed to let you hear outside sounds, do not turn up the volume so high
Battery one-third full
Battery dead or empty. When the batteries are dead
or empty, the symbol
displayed, and the beep tone sounds repeatedly.
flashes, NObAttis
that you cannot hear what is going on around you.
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL INFORMATION / CD PLAY
CD PLAY / FEATURES
In-car use (connections supplied or optionally available)
Playback information
•
If a CD-Recordable (CD-R) or a CD-Rewritable (CD-
RW) is not recorded properly, NF dISCis
displayed, indicating that the CD has not been
finalized. In that case, use FINALIZE on your CD
recorder to complete the recording.
When playing a CD-Rewritable (CD-RW), please note
that it takes 3–15 seconds after pressing 2; for
sound reproduction to start.
Only use the AY 3545 (4822 219 10033) or AY 3548 (3140 118 71890) car voltage
converter (4.5 V DC, positive pole to the center pin) and the AY 3501 cassette car
adapter. Any other product may damage the set.
1
Put the set on a horizontal, vibration-free and
stable surface. Make sure it is in a safe place,
where the set is neither a danger nor an
obstacle to the driver and the passengers.
12 V DC
•
2
Plug the voltage converter into the
cigarette lighter jack (only for 12 V car
battery, negative grounding), then connect
the wired end with 4.5V DC input jack on the
set.
4,5 V DC
•
•
Playback will stop if you open the CD lid.
While the CD is read, 1-:-flashes in the display.
Volume and bass
Volume adjustment
Adjust the volume by using VOL +/−.
3
4
If necessary, clean the cigarette lighter jack to obtain a good electrical con-
tact.
•
Turn down the volume and connect the cassette adapter plug to LINE OUT/p
on the set.
Bass adjustment
•
Press DBB to switch the bass enhancement on or
off
5
6
7
Carefully insert the cassette adapter into the car radio’s cassette compartment.
Make sure the cord does not hinder your driving.
y
is shown if the bass enhancement is
activated.
Decrease the volume on the set if necessary. Start playback on the set and
adjust the sound with the car radio controls.
Remote control (for some versions only)
•
Always remove the voltage converter from the cigarette lighter jack-
when the set is not in use.
Use the AY 3768 / AY 3778 cord remote control.The but-
tons on the remote control have the same functions as
the corresponding buttons on the set.
p
Note: If your car radio has a LINE IN jack, it is better to use it for the
car radio connection instead of the cassette.adapter. Connect the signal
lead to this LINE IN jack and to LINE OUT/p on the set.
1
2
Press 9 twice to switch off the set.
Firmly connect the remote control to LINE OUT/p on
the set.
3
Adjust the volume on the CD player and remote control.
Playing a CD
Selecting a track and searching
Selecting a track during playback
This CD-player can play all kinds of Audio Discs such
as CD-Recordables and CD-Rewritables. Do not try to
play a CD-ROM, CDi, VCD, DVD or computer CD.
•
Briefly press ∞ or § once or several times to skip to
the current, previous or next track.
yPlayback continues with the selected track, and
the track’s number is displayed.
1
2
Push the OPEN 2 slider to open the player.
Selecting a track when playback is stopped
Insert an audio CD, printed side up, by pressing the
CD onto the hub.
1
Briefly press ∞ or § once or several times to select the desired track. The
track number is displayed.
3
4
Close the player by pressing the lid down.
2
Press 2; to start CD play.
yPlayback starts with the selected track.
Press 2; to switch the player on and start playback.
yThe current track number and elapsed playing
time are displayed.
Searching for a passage during playback
1
Keep ∞ or § pressed to find a particular passage in
a backward or forward direction.
ySearching starts while playback continues at low
volume. After 2 seconds the search speeds up.
•
You can pause playback by pressing 2;.
yThe time at which playback was paused starts
flashing.
•
You can continue playback by pressing 2; again.
2
Release the button when you reach the desired passage.
yPlayback continues from this position.
5
Press 9 to stop playback.
yThe total number of tracks and the total playing
time of the CD are displayed.
Notes: – If the player is in SCAN mode (see MODE chapter), searching is not
possible.
– In shuffle, shuffle repeat all or repeat mode (see MODE chapter), or
while playing a program, searching is only possible within the
particular track.
6
Press 9 again to switch the player off.
•
To remove the CD, hold it by its edge and press the
hub gently while lifting the CD.
Note: If there is no activity, the set will automatically
switch off after a while to save energy.
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
FEATURES / TROUBLESHOOTING
Programming track numbers
RESUME and HOLD
You can interrupt playback and continue (even after an
extended period of time) from the position where
playback stopped (RESUME) and you can lock all buttons
of the set so that no action will be executed (HOLD).
Use the OFF–RESUME–HOLD slider for these functions.
You can store up to 30 tracks to play in a program.
A single track may be stored more than once in the
program.
1
While playback is stopped, select a track with
∞ or §.
RESUME – continuing from where you have stopped
2
Press PROGRAM to store the track.
yprogram lights up; the track number
programmed and Pwith the total number of
stored tracks are displayed.
1
Switch the slider to RESUME during playback to activate RESUME.
yresume is shown.
2
3
Press 9 whenever you want to stop playback.
Press 2; whenever you want to resume playback.
yresume is shown and playback continues
from where you have stopped.
3
4
Select and store all desired tracks in this way.
Press 2; to start playback of your selected tracks.
yprogram is shown and playback starts.
•
To deactivate RESUME, switch the slider to OFF.
yresume goes off.
•
You can review the program by pressing PROGRAM
for more than 2 seconds.
yThe display shows all the stored tracks in
sequence.
HOLD – locking all buttons
You can lock the buttons of the set by switching the slider to HOLD. Now, when a
key is pressed, no action will be executed. This is of use, for example, when
transporting the player in a bag. With HOLD activated, you can avoid accidental
activation of other functions.
Notes: – If you press PROGRAM and there is no track selected, SELis
displayed.
– If you try to store more than 30 tracks, FULLis displayed.
1
Switch the slider to HOLD to activate HOLD.
yAll buttons are locked HOLdis shown when
you press any button. If the set is switched off,
HOLdwill be shown only when 2; is
pressed.
Clearing the program
•
While playback is stopped, press 9 to clear program.
yCLRis displayed once, program goes off,
and the program is cleared.
2
To deactivate HOLD, switch the slider to OFF.
Note: If you deactivate HOLD by switching the slider to RESUME,
Note: The program will also be cleared if the power
supply is interrupted, or if the CD-player lid is
opened, or if the set switches off automatically.
you will be activating the RESUME function.
Selecting different playing possibilities−MODE
Troubleshooting
It is possible to play tracks in random order, to repeat a
single track or the entire CD, and to play the first few
seconds of each track.
WARNING: Under no circumstances should you try to repair the set yourself as
this will invalidate the warranty. If a fault occurs, first check the points listed,
before taking the unit for repair. If you are unable to solve a problem by following
these hints, consult your dealer or service center.
1
Press MODE during playback as often as required in
order to activate one of the following ‘modes’. The
active mode is shown in the display.
yshuffle : All tracks of the CD are played in
random order until all of them have been played once.
The CD player has no power, or playback does not start
•
Check that your batteries are not dead or empty, that they are inserted
correctly, that the contact pins are clean.
yshuffle repeat all : All tracks of the CD
•
•
Your adapter connection may be loose. Connect it securely.
For in-car use, check that the car ignition is on. Also check player’s batteries.
are played repeatedly in random order.
yrepeat : The current track is played repeatedly.
yrepeat all : The entire CD is played repeatedly.
The indication NO dISCis displayed
•
•
Check that the CD is clean and correctly inserted (label-side upward).
If your lens has steamed up, wait a few minutes for this to clear.
y
SCAN: The first 10 seconds of each of the
remaining tracks are played in sequence.
The indication NF dISCis displayed
CD-RW (CD-R) was not recorded properly. Use FINALIZE on your CD-recorder.
2
•
Playback starts in the chosen mode after 2 seconds.
To return to normal playback, press MODE repeatedly until the display shows
no active modes.
•
The indication HOLD is on and/or there is no reaction to controls
•
•
If HOLD is activated, then deactivate it.
Electrostatic discharge. Disconnect power or remove batteries for a few seconds.
ESP / Power Save Mode
With a conventional portable CD-player you might have experienced that the
music stopped e.g. when you were jogging. The ELECTRONIC SKIP PROTECTION
prevents loss of sound caused by light vibrations and shocks. Continuous playback
is ensured. However ESP does not prevent playback interruptions during vigorous
running. It also does not protect the unit against any damage caused by
dropping!
The CD skips tracks
•
•
The CD is damaged or dirty. Replace or clean the CD.
RESUME, SHUFFLE or PROGRAM is active. Switch off whichever is on.
No sound or bad sound quality.
•
•
•
•
PAUSE might be active. Press 2;.
•
•
Switch the slider to ESP ON during playback to activate the shock protection.
is shown and the protection is activated.
To deactivate the shock protection, switch the slider to OFF
goes off and the protection is deactivated.
Loose, wrong or dirty connections. Check and clean connections.
Volume might not be appropriately adjusted. Adjust the volume.
Strong magnetic fields. Check player’s position and connections. Also keep
away from active mobile phones.
y
y
ESP on ➟ Power Save ➟ESP on
•
For in-car use, check that the cassette adapter is inserted correctly, that the car
cassette player’s playback direction is correct (press autoreverse to change),
and that the cigarette lighter jack is clean. Allow time for temperature change.
Download from Www.Somanuals.com. All Manuals Search And Download.
PHILIPS CONSUMER ELECTRONICS NORTH AMERICA
Knoxville, Tennessee 37914-1810, U.S.A.
English
Français
Español
Meet Philips at the Internet
CLASS 1
LASER PRODUCT
3140 115 3022 2
Printed in China
wnload from Www.Somanuals.com. All Manuals Search And Downlo
|