7
8
DBB
vol
Portable CD Player
AX3311,AX3312,AX3315
6
5
r
e
p
e
a
t
a
l
l
Audio
4
3
2
Need help? Call us!
Return
9
0
Philips representatives are ready to help you
with any questions about your new product.
yourWarranty
Registration Card
within 10 days
CALL US BEFORE YOU CONSIDER
RETURNING THE PRODUCT!
1
Y
1-800-531-0039
%
$
#
!
@
^
&
+
+
-
1
QUICK START
Portable CD Player
p
1
2
-
+
+
-
English
3
4
#
+
+
/
/
HOLD ➟ OFF
5
PLAY 2;
6 VOL
Meet Philips at the Internet
VE
WER SA
PO
E
S
P
O
N
CLASS 1
LASER PRODUCT
!!!
D
B
v
o
B
l
r
e
p
e
a
t
a
l l
v
DBB
o
l
D
B
v
B
o
l
r
e
p
e
a
t
a
l l
re
p
e
a
t
a
ll
3140 115 31422
2
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER SUPPLY / GENERAL INFORMATION
English
CONTROLS / POWER SUPPLY
Controls ( see figure
1
)
Average playing time of batteries under normal conditions
Battery type
Alkaline AA
Alkaline AAA
Rechargeable ECO-PLUS NiMH battery
ESP on
15 hours
7 hours
3 hours
Power Save
20 hours
9 hours
1 LINE OUT/p........3.5 mm headphone socket, socket to connect the player to
another audio input of an additional appliance
2 ∞ .......................skips and searches CD tracks backwards
3 9.........................stops CD play, clears a program or switches the player off
4 § .......................skips and searches CD tracks forwards
5 2; ......................switches the player on, starts or pauses CD play
6 PROG...................programs tracks and reviews the program
5 hours
Batteries contain chemical substances, so they should be disposed
of properly.
ECO-PLUS NiMH battery information (for versions supplied with the
rechargeable ECO-PLUS NiMH battery AY 3363)
7 MODE .................selects the different playing possibilities: shuffle,
shuffle repeat all, repeat, repeat all and SCAN
Recharging works only on players supplied with the rechargeable ECO-PLUS
NiMH battery AY 3363.
8 ............................display
9 DBB.....................switches the bass enhancement on and off. This button also
switches acoustic feedback (the beep) on/off when it is
pressed for more than 2 seconds
0 VOL −/+..............adjusts the volume
! 4.5V DC...............socket for external power supply
@ OPEN 2 ..............opens the CD lid
Recharging the ECO-PLUS NiMH battery on board
1
Insert the rechargeable ECO-PLUS NiMH battery AY 3363.
2
Connect the mains adapter to the 4.5V DC socket of
the player and then to the wall socket.
y
is pulsing.
# ESP ON /
•
Recharging stops after a maximum of 7 hours, or
when you start playback.
POWER SAVE .......to select between the battery powersave mode and
Electronic Skip Protection (ESP). ESP ensures continuous
CD playback regardless of vibrations and shocks
3
When the battery is fully recharged, FULLappears
in the display.
$ OFF......................switches RESUME and HOLD off
RESUME .............stores the last position of a CD track played
HOLD...................locks all buttons
% ............................typeplate
^ ............................battery compartment
Notes: – It is normal for the batteries to become warm
during recharging.
– If the batteries become too warm, recharging will be interrupted for
approximately 30 minutes .
– To ensure proper recharging on board, take care that contacts are clean.
– Use only the ECO-PLUS NiMH battery AY 3363.
& ............................AAA battery door
Batteries (supplied or optionally available)
Handling instructions
For convenience, this model is designed with 2 different detachable battery
doors. This allows you to operate the player using 2 choices of battery size.
You can use the following batteries with this CD-player:
alkaline batteries type AAA (LR03, UM4) or AA (LR6, UM3) preferably
Philips.
Notes:– Old and new or different types of batteries should not be combined.
– Remove batteries if they are empty or if the player is not going to be used for
a long time.
•
Recharging already charged or half-charged batteries will shorten their
lifetime. We therefore recommend that you let the rechargeable ECO-PLUS
NiMH battery run till it is completely empty before you recharge it.
•
•
•
To avoid a short circuit, do not let the battery touch any metal object.
If the battery becomes empty soon after recharging, then either its contacts
are dirty or it has reached the end of its lifetime.
+
Inserting AAA (LR03, UM4) or AY 3363 batteries
Open the AAA battery door.
Mains adapter (supplied or optionally available)
+
/UM4
1
2
LR03/AAA
Use only the AY 3170 adapter (4.5 V / 300 mA direct
current, positive pole to the center pin). Any other product
may damage the player.
-
Insert AAA batteries as shown onto the back of the
door.
3
Replace the battery-loaded AAA door back onto the
AAA (LR03, UM4)
set.
5
V
DC
1
Make sure the local voltage corresponds to the power
adapter’s voltage.
Inserting AA (LR6, UM3) batteries
-
+
To double playback time, insert AA batteries into the
battery compartment and use the AA marked battery
door.
Open the battery compartment and insert either 2
normal or alkaline batteries.
AA
LR6
SIZE
2
Connect the power adapter to the 4.5V DC socket of
the player and to the wall socket.
+
/
UM3
-
Note: Always disconnect the adapter when you are not using it.
•
AA (LR6, UM3)
Environmental information
Battery indication
The approximate power level of your batteries is shown in the display.
Battery full
•
All redundant packing material has been omitted. We have done our utmost to
make the packaging easily separable into two mono materials: cardboard (box)
and polyethylene (bags, protective foam sheet).
Battery two-thirds full
Battery one-third full
•
Your set consists of materials which can be recycled if disassembled by a
specialized company. Please observe the local regulations regarding the
disposal of packing materials, exhausted batteries and old equipment.
Battery dead or empty. When the batteries are
dead or empty, the symbol
flashes, bAttis
displayed, and the beep tone sounds repeatedly.
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL INFORMATION
CD PLAY
CD player and CD handling
Playing a CD
•
•
Do not touch the lens A of the CD player.
This CD-player can play all kinds of Audio Discs such
as CD-Recordables and CD-Rewritables. Do not try to
play a CD-ROM, CDi, VCD, DVD, MP3-CD or computer
CD.
Do not expose the unit, batteries or CDs to humidity,
rain, sand or excessive heat (caused by heating
equipment or direct sunlight).
•
•
You can clean the CD player with a soft, slightly
dampened, lint-free cloth. Do not use any cleaning
agents as they may have a corrosive effect.
To clean the CD, wipe it in a straight line from the
center toward the edge using a soft, lint-free cloth. A
cleaning agent may damage the disc! Never write on a CD or attach a sticker
to it.
The lens may cloud over when the unit is moved suddenly from cold to warm
surroundings. Playing a CD is not possible then. Leave the CD player in a warm
environment until the moisture has evaporated.
Active mobile phones in the vicinity of the CD player may cause malfunctions.
Avoid dropping the unit as this may cause damage.
1
2
Push the OPEN 2 slider to open the player.
Insert an audio CD, printed side up, by pressing the
CD onto the hub.
•
3
4
Close the player by pressing the lid down.
Press 2; to switch the player on and start playback.
yThe current track number and elapsed playing
time are displayed.
•
•
Headphones HE225
•
You can pause playback by pressing 2;.
yThe time at which playback was paused starts
flashing.
•
Connect the supplied headphones to the LINE OUT/p
socket of the player.
•
You can continue playback by pressing 2; again.
Note: LINE OUT/p can also be used for
connecting this set to your HiFi system.To adjust the
sound and volume, use the controls on the connected
audio equipment and on the CD player.
5
Press 9 to stop playback.
yThe total number of tracks and the total playing
time of the CD are displayed.
IMPORTANT!
6
Press 9 again to switch the player off.
Hearing safety: Do not play your headphones at a high volume. Hearing experts advise
that continuous use at high volume can permanently damage your hearing.
Traffic safety: Do not use headphones while driving a vehicle. It may create a hazard
and it is illegal in many countries. Even if your headphones are an open-air type
designed to let you hear outside sounds, do not turn up the volume so high that you
cannot hear what is going on around you.
•
To remove the CD, hold it by its edge and press the
hub gently while lifting the CD.
Note: If there is no activity, the set will automatically
switch off after a while to save energy.
In-car use (connections supplied or optionally available)
Playback information
•
If a CD-Recordable (CD-R) or a CD-Rewritable (CD-
RW) is not recorded properly, NF dISCis
displayed, indicating that the CD has not been
finalized. In that case, use FINALIZE on your CD
recorder to complete the recording.
When playing a CD-Rewritable (CD-RW), please note
that it takes 3–15 seconds after pressing 2; for
sound reproduction to start.
Only use the AY 3545 or AY 3548 car voltage converter (4.5 V DC, positive pole to
the centre pin) and the AY 3501 car cassette adapter. Any other product may dam-
age the set.
1
Put the set on a horizontal, vibration-free and
stable surface. Make sure it is in a safe place,
where the set is neither a danger nor an
obstacle to the driver and the passengers.
12 V DC
•
4,5 V DC
2
Plug the voltage converter into the
cigarette lighter socket (only for 12 V car
battery, negative grounding), then connect
the wired end with 4.5V DC input socket on the
set.
D
vol
•
•
Playback will stop if you open the CD lid.
B
B
r
e
p
e
a
t
a
l
l
While the CD is read, 1-:-flashes in the display.
Volume and bass
3
4
If necessary, clean the cigarette lighter socket to obtain a good electrical
contact.
Volume adjustment
•
Adjust the volume by using VOL −/+ on the CD player
or the slider on the headphone cord.
Turn down the volume and connect the cassette adapter plug to LINE OUT/p
on the set.
5
6
7
Carefully insert the cassette adapter into the car radio’s cassette compartment.
Make sure the cord does not hinder your driving.
Bass adjustment
Press DBB to switch the bass enhancement on or
off
vol
•
Decrease the volume on the set if necessary. Start playback on the set and
adjust the sound with the car radio controls.
y
is shown if the bass enhancement is
activated.
•
Always remove the voltage converter from the cigarette lighter socket
when the set is not in use.
Note: If your car radio has a LINE IN socket, it is better to use it for the
car radio connection instead of the adapter cassette. Connect the signal
lead to this LINE IN socket and to LINE OUT/p on the set.
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
FEATURES
Selecting different playing possibilities−MODE
Selecting a track and searching
It is possible to play tracks in random order, to repeat a single track or the entire
CD, and to play the first few seconds of each track.
Selecting a track during playback
•
Briefly press ∞ or § once or several times to skip to
the current, previous or next track.
1
Press MODE during playback as often as required in
order to activate one of the following ‘modes’. The
active mode is shown in the display.
yPlayback continues with the selected track, and
the track’s number is displayed.
yshuffle : All tracks of the CD are played in
random order until all of them have been played
once.
Selecting a track when playback is stopped
1
Briefly press ∞ or § once or several times to select
the desired track. The track number is displayed.
yshuffle repeat all : All tracks of the CD
are played repeatedly in random order.
yrepeat : The current track is played repeatedly.
2
Press 2; to start CD play.
yPlayback starts with the selected track.
yrepeat all : The entire CD is played repeatedly.
ySCAN: The first 10 seconds of each of the
Searching for a passage during playback
remaining tracks are played in sequence.
1
Keep ∞ or § pressed to find a particular passage in
a backward or forward direction.
repeat all
shuffle
2
•
Playback starts in the chosen mode after 2 seconds.
To return to normal playback, press MODE repeatedly until the display shows
no active modes.
ySearching starts while playback continues at low
volume. After 2 seconds the search speeds up.
ESP / Power Save Mode
2
Release the button when you reach the desired passage.
yPlayback continues from this position.
With a conventional portable CD-player you might have experienced that the
music stopped e.g. when you were jogging. The ELECTRONIC SKIP PROTECTION
prevents loss of sound caused by light vibrations and shocks. Continuous playback
is ensured. However ESP does not prevent playback interruptions during vigorous
running. It also does not protect the unit against any damage caused by
dropping!
Notes: – If the player is in SCAN mode (see MODE chapter), searching is not
possible.
•
•
Switch the slider to ESP ON during playback to activate the shock protection.
y
is shown and the protection is activated.
To deactivate the shock protection and enter the power save mode, switch the
slider to POWER SAVE.
y
goes off.
Programming track numbers
RESUME and HOLD
You can interrupt playback and continue (even after an
extended period of time) from the position where
playback stopped (RESUME) and you can lock all buttons
of the set so that no action will be executed (HOLD).
Use the OFF–RESUME–HOLD slider for these functions.
You can store up to 30 tracks to play in a program.
A single track may be stored more than once in the
program.
1
While playback is stopped, select a track with
∞ or §.
RESUME – continuing from where you have stopped
2
Press PROG to store the track.
1
Switch the slider to RESUME during playback to activate RESUME.
yresume is shown.
yprogram lights up; the track number
programmed and Pwith the total number of
stored tracks are displayed.
2
3
Press 9 whenever you want to stop playback.
program
Press 2; whenever you want to resume playback.
yresume is shown and playback continues
from where you have stopped.
3
4
Select and store all desired tracks in this way.
Press 2; to start playback of your selected tracks.
yprogram is shown and playback starts.
resume
•
To deactivate RESUME, switch the slider to OFF.
yresume goes off.
•
You can review the program by pressing PROG for
more than 2 seconds.The display shows all the stored
tracks in sequence.
program
HOLD – locking all buttons
You can lock the buttons of the set by switching the slider to HOLD. Now, when a
key is pressed, no action will be executed. This is of use, for example, when
transporting the player in a bag. With HOLD activated, you can avoid accidental
activation of other functions.
y Display NO Progif no tracks programmed.
Notes: – If you press PROG and there is no track selected or no tracks pro-
grammed, SELor NO PRogis displayed.
1
Switch the slider to HOLD to activate HOLD.
yAll buttons are locked HoLdis shown when
you press any button. If the set is switched off,
HoLdwill be shown only when 2; is
pressed.
– If you try to store more than 30 tracks, FULLis displayed.
hold
Clearing the program
•
resume
While playback is stopped, press 9 to clear
program.
y CLRis displayed once, program goes off,
and the program is cleared.
program
2
To deactivate HOLD, switch the slider to OFF.
Note: If you deactivate HOLD by switching the slider to RESUME, you will be
activating the RESUME function.
Note: The program will also be cleared if the power supply is interrupted, or if
the CD-player lid is opened, or if the set switches off automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Return your Warranty Registration card today to
ensure you receive all the benefits you’re entitled to.
Troubleshooting
• Once your Philips purchase is regis-
tered, you’re eligible to receive all the
privileges of owning a Philips product.
• So complete and return theWarranty
Registration Card enclosed with your
purchase at once, and take advantage
of these important benefits.
WARNING: Under no circumstances should you try to repair the set yourself as
this will invalidate the warranty. If a fault occurs, first check the points listed,
before taking the unit for repair. If you are unable to solve a problem by following
these hints, consult your dealer or service center.
Warranty
Owner
Model
Verification
Confirmation
Registration
The CD player has no power, or playback does not start
Registering your product Your completed
Returning yourWarranty
Registration Card right
away guarantees you’ll
•
Check that your batteries are not dead or empty, that they are inserted
correctly, that the contact pins are clean.
Your adapter connection may be loose. Connect it securely.
For in-car use, check that the car ignition is on. Also check player’s batteries.
within 10 days confirms
your right to maximum
protection under the
terms and conditions of
your Philips warranty.
Warranty Registration
Card serves as verifica-
tion of ownership in the receive all the information
event of product theft
or loss.
•
•
and special offers which
you qualify for as the
owner of your model.
The indication NO dISCis displayed
•
•
Check that the CD is clean and correctly inserted (label-side upward).
If your lens has steamed up, wait a few minutes for this to clear.
Know sthaesefety
symbols
For Customer Use
Enter below the Serial No. which is
located on the rear of the cabinet. Retain
this information for future reference.
The indication NF dISCis displayed
CD-RW (CD-R) was not recorded properly. Use FINALIZE on your CD-recorder.
•
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The indication HOLD is on and/or there is no reaction to controls
•
•
Model No. _____________________
Serial No. ______________________
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
If HOLD is activated, then deactivate it.
Electrostatic discharge. Disconnect power or remove batteries for a few seconds.
This “bolt of lightning”
indicates uninsulated material
within your unit may cause an
electrical shock. For the safety of
everyone in your household, please
do not remove product covering.
WARNING: TO PREVENT FIRE
OR SHOCK HAZARD, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN
OR MOISTURE.
The CD skips tracks
•
•
The CD is damaged or dirty. Replace or clean the CD.
resume, shuffle or program is active. Switch off whichever is on.
APPARATUS SHALL NOT BE EXPOSED
TO DRIPPING OR SPLASHING.
DO NOT PLACE ANY SOURCES
OF DANGER ONTHE APPARATUS
(e.g. liquid filled objects, lighted candles).
The “exclamation point” calls
attention to features for which
you should read the enclosed litera-
ture closely to prevent operating and
maintenance problems.
MAC5097
Troubleshooting
No sound or bad sound quality.
•
•
•
PAUSE might be active. Press 2;.
Loose, wrong or dirty connections. Check and clean connections.
Volume might not be appropriately adjusted. Adjust the volume on the CD
player or slider on your remote control.
Strong magnetic fields. Check player’s position and connections. Also keep
away from active mobile phones.
For in-car use, check that the cassette adapter is inserted correctly, that the car
cassette player’s playback direction is correct (press autoreverse to change),
and that the cigarette lighter jack is clean. Allow time for temperature change.
El aparato cumple las normas FCC, Parte 15 y 21 CFR 1040.10. Funcionamiento
dependiente de dos condiciones siguientes:
1. Este aparato no puede provocar interferencia dañina, y
2. Este aparato debe aceptar cualquier interferencia recibida, incluyendo las
interferencias que pueden provocar un funcionamiento insuficiente.
•
•
CAUTION
Use of controls or adjustments or performance of pro-
cedures other than herein may result in hazardous radi-
ation exposure or other unsafe operation.
Canada
English: This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the Radio Interference Regulations
of the Canadian Department of Communications.
Français : Cet appareil numérique n'émet pas de bruits radioélectriques dépas-
sant les limites applicables aux appareils numériques de Classe B prescrites dans
le Règlement sur le Brouillage Radioélectrique édicté par le Ministère des
Communications du Canada.
CAUTION
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
|