Rwegwistewr yo.uprhproildiupctsan.dcgoetmsup/pworteatlcome
32PFL3605/77
32PFL3615/77
42PFL3605/77
42PFL3615/77
EN User manual
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Connect devices
Back connector
20
20
21
22
23
24
Contents
Side connector
Connect a computer
Use Philips EasyLink
Use a Kensington lock
1 Notice
2
3
2 Important
8 Product information
Supported display resolutions
Multimedia
25
25
25
25
25
25
26
26
3 YourTV
5
5
5
Side controls and indicators
Remote control
Tuner/Reception/Transmission
Remote control
Power
SupportedTV mounts
Product speciꢀcation
4 Use yourTV
7
7
7
8
8
Switch yourTV on/off or to standby
Switch channels
Watch connected devices
AdjustTV volume
9 Troubleshooting
GeneralTV issues
TV channel issues
Picture issues
27
27
27
27
28
28
28
28
5 Use more of yourTV
AccessTV menus
9
9
9
9
Sound issues
Remove devices from the home menu
Change picture and sound settings
HDMI connection issues
Computer connection issues
Contact us
Create and use list of favorite channels 11
Use theTV clock
12
12
13
14
Use timers
UseTV locks
10 Index
29
View closed captions (subtitles)
View photos and play music from a
USB storage device
14
16
16
17
17
Update theTV software
ChangeTV preferences
Start aTV demo
Reset theTV to factory settings
6 Install channels
SelectTV tuner
18
18
18
18
19
19
Automatically install channels
Manually install channels
Rename channels
Rearrange channels
EN
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright
1 Notice
All other registered and unregistered
trademarks are the property of their respective
owners.
2010 © Koninklijke Philips Electronics N.V.All
rights reserved.
® Kensington and Micro Saver are registered
US trademarks of ACCO World corporation
with issued registrations and pending
applications in other countries throughout the
world.
Portions of this software are copyright ©The
FreeType Project (www.freetype.org).
Speciꢀcations are subject to change without
notice.Trademarks are the property of
Koninklijke Philips Electronics N.V. or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
The material in this manual is believed
adequate for the intended use of the system.
If the product, or its individual modules or
procedures, are used for purposes other than
those speciꢀed herein, conꢀrmation of their
validity and suitability must be obtained. Philips
warrants that the material itself does not
infringe any United States patents. No further
warranty is expressed or implied.
HDMI, and HDMI logo and High-Deꢀnition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC.
Philips cannot be held responsible neither for
any errors in the content of this document
nor for any problems as a result of the content
in this document. Errors reported to Philips
will be adapted and published on the Philips
support website as soon as possible.
Pixel characteristics
This LCD product has a high number of
color pixels.Although it has effective pixels of
99.999% or more, black dots or bright points of
light (red, green or blue) may appear constantly
on the screen.This is a structural property of
the display (within common industry standards)
and is not a malfunction.
Warranty
No components are user serviceable. Do not
open or remove covers to the inside of the
product. Repairs may only be done by Philips
Service Centres and ofꢀcial repair shops. Failure
to do so shall void any warranty, stated or
implied.
Any operation expressly prohibited in
this manual, any adjustments, or assembly
procedures not recommended or authorised in
this manual shall void the warranty.
2
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Risk of injury or damage to the TV!
2 Important
•
Two people are required to lift and carry
a TV that weighs more than 55 lbs.
•
When stand mounting the TV, use only
the supplied stand. Secure the stand to
the TV tightly. Place the TV on a ꢁat, level
surface that can support the combined
weight of the TV and the stand.
When wall mounting the TV, use only a
wall mount that can support the weight of
the TV. Secure the wall mount to a wall
that can support the combined weight of
the TV and wall mount. Koninklijke Philips
Electronics N.V. bears no responsibility
for improper wall mounting that results in
accident, injury or damage.
Read and understand all instructions before you
use yourTV. If damage is caused by failure to
follow instructions, the warranty does not apply.
•
Safety
Risk of electric shock or ꢀre!
•
Never expose the TV to rain or water.
Never place liquid containers, such as
vases, near the TV. If liquids are spilt on
or into the TV, disconnect the TV from
the power outlet immediately. Contact
Philips Consumer Care to have the TV
checked before use.
Never place the TV, remote control or
batteries near naked ꢁames or other heat
sources, including direct sunlight.
To prevent the spread of ꢀre, keep
candles or other ꢁames away from the
TV, remote control and batteries at all
times.
Risk of injury to children!
Follow these precautions to prevent the
TV from toppling over and causing injury to
children:
•
•
Never place the TV on a surface covered
by a cloth or other material that can be
pulled away.
•
•
Ensure that no part of the TV hangs over
the edge of the surface.
Never place the TV on tall furniture (such
as a bookcase) without anchoring both
the furniture and TV to the wall or a
suitable support.
•
Educate children about the dangers of
climbing on furniture to reach the TV.
Risk of overheating!
•
•
•
Never insert objects into the ventilation
slots or other openings on the TV.
When the TV is swiveled ensure that
no strain is exerted on the power cord.
Strain on the power cord can loosen
connections and cause arcing.
Never install the TV in a conꢀned space.
Always leave a space of at least 4 inches
or 10 cm around the TV for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the TV.
Risk of damage to the TV!
•
Risk of short circuit or ꢀre!
•
Before you connect the TV to the power
outlet, ensure that the power voltage
matches the value printed on the back
of the TV. Never connect the TV to the
power outlet if the voltage is different.
Never expose the remote control or
batteries to rain, water or excessive heat.
Avoid force coming onto power plugs.
Loose power plugs can cause arcing or
ꢀre.
•
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Risk of injury, ꢀre or power cord damage!
Disposal of your old product and
batteries
•
Never place the TV or any objects on the
power cord.
•
To easily disconnect the TV power cord
from the power outlet, ensure that you
have full access to the power cord at all
times.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
•
•
When you disconnect the power cord,
always pull the plug, never the cable.
Disconnect the TV from the power
outlet and antenna before lightning
storms. During lightning storms, never
touch any part of the TV, power cord or
antenna cable.
When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European Directive
2002/96/EC. Please inform yourself about the
local separate collection system for electrical
and electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
Risk of hearing damage!
•
Avoid using earphones or headphones at
high volumes or for prolonged periods of
time.
Low temperatures
•
If the TV is transported in temperatures
below 5°C, unpack the TV and wait
until the TV temperature matches room
temperature before connecting the TV to
the power outlet.
Correct disposal of your old product helps to
prevent potential negative consequences for
the environment and human health.
Screen care
•
Avoid stationary images as much as
possible. Stationary images are images
that remain on-screen for extended
periods of time. Examples include:
on-screen menus, black bars and time
displays. If you must use stationary
images, reduce screen contrast and
brightness to avoid screen damage.
Unplug the TV before cleaning.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environmental and
human health.
•
•
Clean the TV and frame with a soft,
damp cloth. Never use substances such as
alcohol, chemicals or household cleaners
on the TV.
•
•
Risk of damage to the TV screen! Never
touch, push, rub or strike the screen with
any object.
To avoid deformations and color fading,
wipe off water drops as soon as possible.
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
3 YourTV
Remote control
1
2
3
4
Congratulations on your purchase, and
welcome to Philips!To fully beneꢀt from the
support that Philips offers, register yourTV at
22
21
20
19
5
This section gives you an overview of
commonly usedTV controls and functions.
6
18
7
8
Side controls and indicators
17
16
9
10
1
2
3
15
11
12
13
4
5
14
a
b
+/-: Increases or decreases volume.
(Home): Toggles the home menu on
or off.
c P/CH +/-: Switches to the next or
previous channel.
a
(Standby-On)
•
•
Switches the TV to standby if it is on.
Switches on the TV if it is in standby.
d
(Power): Switches the product on
or off. The product is not powered
off completely unless it is physically
unplugged.
b MENU
Toggles the main menu on or off.
e Standby indicator and remote control
c
INCR. SURR
sensor.
Enables Incredible Surround for stereo
sources. Enables spatial mode for mono
sources.
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
d
SOURCE
s TV/PC
Toggles between PC mode and
previously viewed video mode.
Selects connected devices.
e SAP (Secondary audio program)
Selects Secondary Audio Program (SAP)/
Stereo/ Mono when SAP and/or Stereo is
broadcast.
t SLEEP
Sets a delay after which the TV switches
to standby.
f
OPTIONS
u
FORMAT
Accesses options relating to the current
activity or selection.
Toggles through available picture formats.
Some formats are not available for some
picture sources.
g OK
Conꢀrms an entry or selection and
v DEMO
Toggles the demonstration menu on or off.
displays the channel grid, when watching
TV.
h
i
j
(Navigation buttons)
Remote control usage
Navigates menus.
When using the remote control, hold it
close to the TV and point it at the remote
control sensor. Make sure that the line-of-site
between the remote control and TV is not
blocked by furniture, walls or other objects.
INFO
Displays program information, if available.
(Mute)
Mutes or restores volume.
k CH +/- (CHANNEL +/ -)
Switches to the next or previous channel.
When the TV menu is on, this functions
as Page Up/Down.
~5m
~30˚
l 0-9 (Numeric buttons)
Selects a channel or setting.
m
n
o
p
PICTURE (Smart picture)
Launches the picture menu.
SOUND (Smart Sound)
Launches the sound menu.
+/- (Volume +/-)
Increases or decreases volume.
BACKA/CH
•
•
Returns to a previous screen.
Returns to the previously viewed
channel.
q
BROWSE
Switches between channel grid and
program list.
r CC
Displays closed captions settings.
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Use yourTV
Switch channels
•
Press CH +/- on the remote control or
P/CH +/- on the side of the TV.
Enter a channel number using the
Numeric buttons.
This section helps you perform basicTV
operations (see ‘Use more of yourTV’ on page
9).
•
•
•
Press OK to use the channel grid.
Press
BACK A/CH on the remote
control to return to the previous channel.
Switch yourTV on/off or to
standby
Note
• When you use a favourite list, you can only
select those channels in the list (see ‘Select a
favorite list’ on page 11).
Switch channels with the channel grid
The channel grid allows you to view all
available channels in a grid format.
To switch on
•
If the standby indicator is off, press
(Power) at the side of the TV.
•
If the standby indicator is red, press
(Standby-On) on the remote control.
To switch to standby
•
1 Press OK.
Press (Standby-On) on the remote
control.
» The standby indicator switches to red.
» The channel grid appears.
2 Press
to browse the channel grid
To switch off
and preview a channel.
•
Press (Power) at the side of the TV.
» The channel content is displayed after
» The standby indicator switches off.
about two seconds.
3 Press OK to select a channel.
Tip
• Though your TV consumes very little power
when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the TV power cable
from the power outlet.
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Watch connected devices
AdjustTV volume
Note
• Switch on the device before selecting it as a
source on the TV.
Use the source button
To increase or decrease volume
•
Press
+/-.
To mute or unmute sound
1 Press
SOURCE.
•
•
Press to mute the sound.
Press again to restore the sound.
» The source list appears.
2 Press
to select a device.
3 Press OK to conꢀrm your choice.
» TheTV switches to the selected
device.
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Use more of
yourTV
Remove devices from the
home menu
If a device is no longer connected to theTV,
remove it from the home menu.
AccessTV menus
1 Press MENU.
2 Press
to select a device to remove.
Menus help you to install channels, change
picture and sound settings and access other
features.
3 Press OPTIONS.
» The [Remove device] list appears.
4 Press OK, then select [Remove] to
1 Press MENU.
remove the device.
» The menu screen appears.
» The selected device is removed from
the home menu.
Watch TV
Setup
Add new device
Change picture and sound
settings
Change picture and sound settings to suit your
preferences.You can apply pre-deꢀned settings
or change settings manually.
2 Press
to select and navigate
Use smart picture
Use smart picture to apply pre-deꢀned
picture settings.
through one of the following menus.
•
[Watch TV]: Switches back to the
antenna source if another source is
selected.
1 Press PICTURE.
•
•
[Add new device]: Adds new devices
to the home menu.
[Setup]: Accesses menus to change
picture, sound and other settings.
» The [Smart picture] menu appears.
2 Press
to select from the following
smart picture settings:
•
•
•
[Personal]: Lists customized picture
settings.
3 Press OK to conꢀrm your choice.
4 Press MENU to exit.
[Sports]: Applies rich and dynamic
settings.
Tip
[Standard]: Adjusts picture settings
to suit most environments and types
of video.
[Movie]: Applies settings for movie
viewing.
• After selecting [Add new device], follow the
on-screen instructions to select the correct
device and connector.
•
•
•
[Game]: Applies settings for games.
[Energy saving]: Applies low-energy
settings.
3 Press OK to conꢀrm your choice.
» The selected smart picture setting is
applied.
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Manually adjust picture settings
Change picture format
1 Press MENU.
1 Press
FORMAT.
» A picture format bar appears.
2 Press
to select [Setup] >
[Picture].
» The [Picture] menu appears.
2 Press
to select a picture format.
» The selected picture format is activated.
3 Press OK to conꢀrm your choice.
3 Press
to select from the following
settings and adjust:
•
[Smart picture]: Accesses pre-deꢀned
smart picture settings.
Summary of picture formats
The following picture settings can be conꢀgured.
•
•
[Backlight]: Adjusts the backlight.
[Contrast]: Adjusts the intensity of bright
areas, keeping dark areas unchanged.
[Brightness]: Adjusts the intensity and
details of dark areas.
Note
•
• Depending on the format of the picture
source, some picture settings are not available.
•
•
[Color]: Adjusts color saturation.
[Tint]: Adjusts the color balance in an
image.
[Sharpness]: Adjusts sharpness in the
image.
[Noise reduction]: Filters and reduces
noise in an image.
[Color temperature]: Introduces more
orange tones ([Warm]) or blue tones
([Cool]).
[Super zoom]: (Not for HD
and PC mode.) Removes the
black bars on the side of 4:3
broadcasts. There is minimal
distortion.
•
•
•
[4:3]: Shows the classic 4:3
format.
[Subtitle zoom]: Displays 4:3
pictures over the full area of the
screen, with sub-titles visible.
Part of the top of the picture is
clipped off.
[Movie expand 14:9]: (Not for
HD and PC mode.) Scales 4:3
format to 14:9.
•
[Dig.CrystalClear]: Adjusts picture
quality to optimal contrast, color and
sharpness.
•
[Dynamic contrast]: Enhances
contrast.
[Dynamic backlight]: Adjusts
brightness of the TV backlight to
match lighting conditions.
[Color enhancement]: Makes colors
more vivid and improves the details
in bright colors. You can switch this
feature on or off.
•
[Movie expand 16:9]: (Not for
HD and PC mode.) Scales 4:3
format to 16:9.
•
[Wide screen]: Scales 4:3
format to 16:9.
•
•
•
•
[PC mode]: Adjusts picture settings when
a PC is connected to the TV.
[Picture format]: Changes the picture
format.
[Horizontal shift]: Adjusts the picture
horizontally for PC-VGA or HD input.
[Vertical shift]: Adjusts the picture
vertically for PC-VGA or HD input.
[Unscaled]: For HD and PC
mode only, and in selected
models only. Allows maximum
sharpness. Some distortion
may be present due to the
broadcaster’s systems. Set your
PC resolution to wide screen
mode for best results.
10 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
[Surround]: Enables spatial sound.
[Auto volume]: Automatically
reduces sudden volume changes, for
example, when switching channels.
[Delta volume]: Levels out volume
differences between channels or
connected devices. Switch to the
connected device before you change
the delta volume.
Use smart sound
Use smart sound to apply pre-deꢀned sound
settings.
•
1 Press SOUND.
» The [Smart sound] menu appears.
2 Press
to select a smart sound
setting:
•
[Standard]: Adjusts sound settings
to suit most environments and types
of audio.
Create and use list of favorite
channels
•
[News]: Applies settings for spoken
audio, such as news.
•
•
[Movie]: Applies settings for movies.
[Personal]: Applies the settings that
were customized in the sound menu.
You can create a list of your preferredTV
channels so that you can ꢀnd those channels
easily.
3 Press OK to conꢀrm your choice.
» The selected smart sound setting is
applied.
Select a favorite list
1 When watching TV, press OK to display
the channel grid.
Manually adjust sound settings
2 Press OPTIONS.
1 Press MENU.
» The channel options menu appears.
2 Press
to select [Setup] > [Sound].
3 Press
to select [Select list], then
» The [Sound] menu appears.
press OK to enter.
3 Press
to select and adjust:
[Smart sound]: Accesses pre-deꢀned
smart sound settings.
» The channel list options appear.
•
4 Select [Favorite], then press OK.
» Only channels in the favorite list
appear in the channel grid.
•
•
•
•
[Bass]: Adjusts the bass level.
[Treble]: Adjusts the treble level.
[Volume]: Adjusts the volume.
[Balance]: Adjusts the balance of the
right and left speakers.
Note
• The favorite channel grid is empty until you
add channels into the favorite lists.
•
•
[SAP]: Selects a second broadcast
audio language.
[Mono/Stereo]: Selects mono
or stereo if stereo broadcast is
available.
[TV speakers]: Sets the TV speakers
on or off, or outputs sound to an
EasyLink-compliant device. Easylink
must be activated in the preferences
menu.
Add a channel to a favorite list
•
1 When watching TV, press OK.
» The channel grid appears.
2 Press
to select a channel to add to
a favorite list.
3 Press OPTIONS.
» The channel options menu appears.
EN 11
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Select [Mark as favorite], then press OK.
» The channel is added to the favorite
list.
Note
• To disable the clock, repeat the above
procedure.
Note
• All favorite channels are marked by an asterisk
in the channel grid.
Use timers
You can set timers to switch theTV to standby
at a speciꢀed time.
Remove a channel from a favorite list
1 When watching TV, press OK.
Tip
» The channel grid appears.
• Set the TV clock before you use timers.
2 Press
to select a channel to
remove.
3 Press OPTIONS.
Automatically switch theTV to
standby (sleep timer)
Sleep timer switches the TV to standby after a
pre-deꢀned period of time.
4 Select [Unmark as fav.], then press OK.
» The channel is removed.
Use theTV clock
Tip
• You can switch off your TV earlier or reset the
sleep timer during the countdown.
You can display theTV clock. (only available in
RF)
1 Press MENU.
Set theTV clock
2 Press
to select [Setup] >
[Features] > [Sleep timer].
» The [Sleep timer] menu appears.
1 Press MENU.
2 Select [Setup] > [Features] > [Clock]
3 Press
to set the sleep time.
» The [Clock] menu appears.
» The sleep timer can be up to 180
minutes in steps of ꢀve minutes. If set
to zero, the sleep timer is switched off.
3 Press
or the Numeric buttons to
enter time.
4 Select [Done] and press OK to conꢀrm.
4 Press OK to switch on the sleep timer.
» TheTV switches to standby after the
speciꢀed time.
5 Press MENU to exit.
Display theTV clock
1 When watching TV, press OPTIONS.
» TheTV option menu appears.
2 Select [Clock].
3 Press OK.
12 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatically switch theTV on (on
timer)
You can switch on the TV from standby to a
speciꢀc channel at a speciꢀed time.
Lock or unlock theTV
Lock the TV to prevent access to all channels
and connected devices.
1 Press MENU.
1 Press MENU.
2 Press
to select [Setup] >
[Features] > [TV lock].
2 Press
to select [Setup] >
» You are prompted to enter your PIN
[Features] > [On timer].
code.
3 Press to enter the [On timer] menu.
•
•
•
[Activate]: Selects how often the TV
is switched on.
[Time]: Sets the time to switch on
the TV.
[Channel no.]: Selects the channel.
3 Enter your code with the Numeric
buttons.
» The [TV lock] menu appears.
4 Press
to select [Lock] or [Unlock].
5 Press OK to conꢀrm.
4 Press MENU to exit.
» All channels and connected devices are
locked or unlocked.
Tip
6 Press MENU to exit.
• Select [On timer] > [Activate] > [Off] to
disable this feature.
Note
• If you select [Lock], you have to enter your
code every time you turn on your TV.
UseTV locks
You can prevent your children from watching
certain programs or channels by locking theTV
controls.
Lock or unlock one or more channels
1 When watching TV, press OK to display
the channel grid.
2 Press
to select a channel to lock or
Set or change your PIN code
unlock.
1 Press MENU.
3 Press OPTIONS.
2 Press
to select [Setup] >
4 Press
to select [Lock channel] or
[Features] > [Set code] / [Change code].
» The [Set code] / [Change code] menu
appears.
[Unlock channel], then press OK.
» You are prompted to enter your PIN
code.
3 Enter your code using the Numeric
5 Enter your code and press OK.
» If the channel is locked, a lock icon
displayed.
buttons.
» Follow the on-screen instructions to
create or change your PIN code.
6 Repeat the process to lock or unlock
more channels.
Tip
• If you forget your code, enter ‘8888’ to
override any existing codes.
EN 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
View photos and play music
from a USB storage device
• Switch the TV off and on again for the change
to take effect.
• If you access the locked channels, you are
prompted to enter your PIN code.
Use the USB connector to view photos or
listen to music stored on a USB storage
device.
Note
View closed captions
(subtitles)
• Your TV only supports USB ꢁash drives in
FAT/FAT32 format. It does not support other
devices that can be connected to the USB
port including but not limited to the following:
portable storage devices such as external
hard drives and mini hard drives, MP3 player,
digital camera, phone, portable video player,
portable multimedia player.
The caption service displays transmitted
closed caption text.The captioned text can be
displayed permanently or only when theTV is
muted.
Note
• This television provides a display of television
closed captioning that conforms with the EIA-
608 standard and in accordance with Sections
15.119 of the FCCrules.
Connect a USB storage device and
enter the content browser
1 Turn on the TV.
• If you connect your set-top box via HDMI or
component video input, you cannot select
closed caption through the TV. You can select
closed caption through the set-top box only.
• The captions do not always use correct
spelling and grammar.
2 Connect the USB storage device to the
TV.
3 Press MENU.
» The home menu appears.
• Not all TV programs and product commercials
include closed caption information. Refer
to your area TV program listings for the TV
channels and times of closed caption shows.
The captioned programs are usually noted in
the TV listings with service marks such as ‘CC’.
4 Press
to select [Browse USB].
5 Press OK to conꢀrm.
» The USB content browser appears.
Tip
1 Press MENU.
• Press BROWSE to switch between
2 Select [Setup] > [Features] > [Closed
thumbnail and ꢀle browsing views.
caption].
3 Press to enter [Closed caption].
4 Press
to select your preference.
5 Press OK.
6 Press MENU to exit.
14 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
View photos
Listen to music
1 In the USB browser, press to enter the
1 In USB browser view, select [MUSIC] and
[Picture] folder.
press to enter.
2 Press
to select a photo or a photo
2 Press
to select a music track or
album.
album.
3 Press OK to view a full screen image of
3 Press OK to play the selected music.
the photo.
Button
Function
Tip
OK
Pause, resume play or stop
playback.
• When in full screen mode, press
between photos.
to move
/
Go to the previous or next
music.
View a slide show of your photos
Music settings
When listening music, press OPTIONS to
access one of the following music settings.
1 When a full screen image of a photo is
displayed, press OK.
» A slide show begins from the selected
photo.
•
•
[Start playback] / [Stop playback]: Starts
or stops the music.
2 Press the following buttons to control the
[Play mode]:
slide show:
•
[Play once]: Disables repeat play and
plays a song once.
•
•
OK to pause the slide show.
to go back or move forward to
the next image.
•
•
[Repeat]: Repeats a song.
[Shuf]e]: Plays songs randomly.
•
BACK to stop the slide show.
•
•
[Show info]: Displays the ꢀle name.
[TV speakers]: Sets the TV speakers on
or off.
Change slide show settings
1 When viewing a slide show, press
OPTIONS.
View a slide show with music
You can view picture slide show with
background music.
» The slide show options menu appears.
2 Press
to select from the following
settings and adjust:
1 Select an album of songs.
•
•
•
[Start slideshow] / [Stop slideshow]:
Starts or stops a slide show.
[Slideshow transitions]: Displays a
list of transition styles.
[Slideshow frequency]: Sets the
amount of time that a picture is
shown.
2 Press OK.
3 Press
BACK to return to USB content
browser.
4 Select an album of pictures.
5 Press OK to view photo.
6 Press OK again to start slide show.
•
•
[Rotate image]: Rotates a picture.
[Show info]: Displays the picture
name, date, size and next picture in
the slide show.
3 Press OK to conꢀrm the setting change.
EN 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Disconnect a USB storage device
Update using a USB device
Connect your USB device to the USB port at
the side of your TV.
1 If the software update screen does not
appear automatically, select [Setup] >
[Software update] > [Local updates].
Caution
• Follow this procedure to avoid damage to your
USB storage device.
1 Press
BACK to exit the USB browser.
2 Wait for ꢀve seconds then disconnect the
2 Press OK to update the TV software
manually.
USB storage device.
3 Follow the on-screen instructions to
complete the update.
Update theTV software
Note
• The TV restarts after the software update is
complete.
Philips continuously tries to improve its
products and we recommend that you update
theTV software when updates are available.
ChangeTV preferences
Check the current software version
Use the preferences menu to customize your
TV settings.
1 Press MENU.
2 Select [Setup] > [Software update] >
1 Press MENU.
[Current software].
2 Select [Setup] > [Installation] >
» TheTV displays the current software
information.
[Preferences].
•
•
•
[Location]: Optimizes TV settings for
your location - home or shop.
[Volume bar]: Displays the volume
bar when you adjust the volume.
[EasyLink]: Enables one-touch play
and one-touch standby between
EasyLink-compliant devices.
[Pixel Plus Link]: Overrides the
settings of connected devices and
uses the settings of the TV.
Download the software
1 On your PC, open a web browser and go
2 Download the latest software upgrade
ꢀle to your PC.
•
•
3 Decompress the ZIP-ꢀle.
4 Copy the ꢀle to the root directory of the
[E-sticker]: For shop mode only. Sets
the location of the e-sticker.
USB device.
3 Press MENU to exit.
16 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Start aTV demo
You can use demonstrations to better
understand the features of your TV. Some
demos are not available on certain models.
Available demos are displayed in the menu list.
1 Press DEMO on the remote control.
2 Press
to select a demo and press OK
to view it.
3 Press
BACK to exit.
Reset theTV to factory
settings
You can restore the default picture and sound
settings of yourTV.The channel installation
settings remain the same.
1 Press MENU.
2 Select [Setup] > [Installation] > [Factory
settings].
3 Press to enter [Factory settings].
4 Select [Reset] to start resetting.
5 Press OK.
6 Press MENU to exit.
EN 17
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Install channels
Manually install channels
This section describes how to search and store
analogTV channels manually.
The ꢀrst time you setup yourTV, you are
prompted to select a menu language and to
installTV and digital radio channels (if available).
This chapter provides instructions on how to
re-install and ꢀne tune channels.
Select your system
Note
• Skip this step if your system settings are
correct.
SelectTV tuner
1 Press MENU.
1 Press MENU.
2 Press
to select [Setup] >
2 Select [Setup] > [Installation] >
[Installation] > [Channel install.] >
[Manual install].
» The [Manual install] menu appears.
[Channel install.] > [Tuner mode]
3 Press
to select the source of TV
broadcast, then press OK to conꢀrm the
3 Press
to select [Color system], then
selection.
press to enter.
4 Press to return to previous menu.
4 Select your system, then press OK to
conꢀrm.
Note
5 Repeat the previous steps for [Sound
• If you are not sure what TV source to use,
system].
select [Auto].
6 Press MENU to exit.
Fine tune analog channels
Automatically install channels
1 Press MENU.
This section describes how to search and store
channels automatically.
2 Press
to select [Setup] >
[Installation] > [Channel install.] >
[Manual install].
» The [Manual install] menu appears.
1 Press MENU.
2 Select [Setup] > [Installation] >
[Channel install.] > [Channel assistant].
3 Press
to select [Fine-tune], then
press to enter.
to adjust frequency.
3 Press OK.
4 Press
4 Follow the on-screen instructions to
install channels.
5 Press OK to conꢀrm.
6 Press MENU to exit.
18 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
Skip channels
• The device name can be up to six characters
long.
1 When watching TV, switch to the channel
you want to skip.
• Press [Aa] to change uppercase letter to
lowercase letter and vice versa.
2 Press MENU.
3 Press
to select [Setup] >
[Installation] > [Channel install.] >
[Manual install].
Rearrange channels
» The [Manual install] menu appears.
4 Press
to select [Skip channel], then
press to enter.
to select [Skip] > [Yes], then
After you install channels, you can rearrange the
order in which they appear.
5 Press
1 When watching TV, press OK to display
press OK to skip current channel.
» The selected channel is skipped when
you press CH +/- on your remote
control or view the channel grid.
the channel grid.
2 Press OPTIONS.
» The channel options menu appears.
3 Press
to select [Reorder], then press
6 Repeat the previous steps to skip more
OK.
channels.
4 Select the channel to rearrange, then
press OK.
Tip
» The selected channel is highlighted.
• Use the Numeric buttons on the remote
control to access the skipped channel.
• To access the skipped channel, repeat steps
1-5 and select [No] to restore.
5 Press
to move the highlighted
channel to the desired location, then
press OK.
6 Press OPTIONS.
» [Done reordering] appears on the
screen.
Rename channels
7 Press OK to conꢀrm.
You can rename channels.The name appears
when you select the channel.
8 Press
BACK to exit the channel grid.
1 When watching TV, press OK to display
the channel grid.
2 Select the channel to rename.
3 Press OPTIONS.
» The channel options menu appears.
4 Press
to select [Rename channel],
then press OK.
» A text input box appears.
5 Press
to select characters.
6 Press OK to conꢀrm each characters.
7 Select [Done], then press OK to ꢀnish
renaming channels.
EN 19
Download from Www.Somanuals.com. All Manuals Search And Download.
a TV ANTENNA
Signal input from an antenna, cable or
satellite.
7 Connect devices
This section describes how to connect
various devices with different connectors and
supplements examples provided in the Quick
Start.
TV ANTENNA
Caution
• Disconnect the mains cord before connecting
devices.
Note
b AUDIO OUT
• Different types of connectors may be used to
connect a device to your TV, depending on
availability and your needs.
Analog audio output to home theaters
and other audio systems.
AUDIO
OUT
AUDIO
IN
Back connector
c CVI 1 / CVI 2 (Y Pb Pr and AUDIO L/R)
Analog audio and video input from analog
or digital devices such as DVD players or
game consoles.
20 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
d PC IN (VGA / PC and AUDIO IN)
Side connector
Audio and video input from a computer.
PC AUDIO IN
VGA
VGA/PC
e HDMI 1 / HDMI 2
Digital audio and video input from high-
deꢀnition digital devices such as Blu-ray
players.
a AUDIO L/R
Audio input from analog devices
connected to VIDEO.
Connections via DVI or VGA require an
additional audio cable.
f SERV. U
For use by service personnel only.
EN 21
Download from Www.Somanuals.com. All Manuals Search And Download.
b VIDEO
Composite video input from analog
devices such as VCRs.
Connect a computer
Before you connect a computer to theTV
•
Set the monitor refresh rate on your
computer to 60Hz.
•
Press
FORMAT and change the TV
picture format to [Unscaled].
Connect a computer with one of the
following connectors:
Note
• Connections via DVI or VGA require an
additional audio cable.
c S-VIDEO
•
HDMI cable
S-Video (side) to be used with Audio L/R
connectors for camcorder, game console,
etc. When you use the S-Video (side) for
video signals, do not use the Composite
video (side) input for video signals.
•
DVI-HDMI cable
PC AUDIO IN/ PC IN(AUDIO)
d USB
Data input from USB storage devices.
DVI
22 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
HDMI cable and HDMI-DVI adaptor
Use Philips EasyLink
Your TV supports Philips EasyLink, which
uses the HDMI CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices
that are connected through HDMI connectors
can be controlled by a single remote control.
PC AUDIO IN/ PC IN(AUDIO)
Note
DVI
• The EasyLink-compliant device must be
switched on and selected as the source.
• Philips does not guarantee 100%
interoperability with all HDMI CEC devices.
•
VGA cable
EasyLink features
One-touch play
PC AUDIO IN/ PC IN(AUDIO)
When you connect your TV to devices that
support one-touch play, you can control your
TV and the devices with one remote control.
One-touch standby
When you connect your TV to devices that
support standby, you can use your TV remote
control to put your TV and all connected
HDMI devices in standby mode.
VGA
System audio control
When you connect your TV to HDMI
CEC compliant devices, your TV can
switch automatically to play audio from the
connected device.
To use one-touch audio, you must map the
audio input from the connected device to
your TV.
You can use the remote control from the
connected device to adjust the volume.
EN 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Enable or disable EasyLink
Use a Kensington lock
Note
There is a Kensington security slot at the back
of theTV. Prevent theft by looping a Kensington
lock between the slot and a permanent object,
such as a heavy table.
• Do not enable Philips EasyLink if you do not
intend to use it.
1 Press MENU.
2 Press
to select [Setup] >
[Installation] > [Preferences] >
[EasyLink].
3 Select [On] or [Off].
Use one-touch play
1 After enabling EasyLink, press play on
your device.
» TheTV automatically switches to the
correct source.
Use one-touch standby
1 Press (Standby-On) on the TV’s or
device’s remote control.
» TheTV and all connected HDMI
devices switch to standby.
SetTV speakers to EasyLink mode
When you play content from an EasyLink
compliant home theater, the TV speakers are
automatically muted.
1 Press MENU.
2 Press
to select [Setup] > [Sound]
> [TV speakers] > [Auto EasyLink].
» TheTV speakers are turned off
automatically when content from an
Easylink compliant system is detected.
3 Select [Setup] > [Sound] > [TV
speakers] > [On] to disable system audio
control and enable the TV speakers.
24 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Product
information
Multimedia
•
Supported storage device: USB (Only
FAT 16 or FAT 32 USB storage devices
are supported)
Product information is subject to change
without notice. For detailed product
•
Supported multimedia ꢀle formats:
•
•
Images: JPEG
Audio: MP3
Note
Supported display resolutions
• Multimedia ꢀle names must not exceed 128
characters.
Computer formats (HDMI)
•
Resolution - refresh rate:
•
•
•
•
•
•
640 x 480 - 60Hz
800 x 600 - 60Hz
1024 x 768 - 60Hz
1280 x 1024 - 60Hz
1360 x 768 - 60Hz
1920 X 1080 - 60Hz
Tuner/Reception/
Transmission
•
•
•
Antenna input: 75ohm coaxial (IEC75)
TV system: NTSC, PAL-M, PAL-N
Video playback: NTSC, PAL
Computer formats (VGA)
Resolution - refresh rate:
•
•
•
•
•
•
640 x 480 - 60Hz
800 x 600 - 60Hz
1024 x 768 - 60Hz
1280 x 1024 - 60Hz
1360 x 768 - 60Hz
Remote control
•
Batteries: 2 x AAA (R03 type)
Video formats
•
Resolution - refresh rate:
•
•
•
•
•
•
•
480i - 60Hz
Power
480p - 60Hz
576i - 50Hz
•
•
•
Mains power: 220-240 V ~, 50-60 Hz
576p - 50Hz
Standby power: < 1 W
Ambient temperature: 5 to 40 degrees
Celsius
720p - 50Hz, 60Hz
1080i - 50Hz, 60Hz
1080p - 24Hz, 25Hz, 30Hz, 50Hz,
60Hz
EN 25
Download from Www.Somanuals.com. All Manuals Search And Download.
SupportedTV mounts
Product speciꢀcation
To mount theTV, purchase a PhilipsTV mount
or aVESA-compatibleTV mount.To prevent
damage to cables and connectors, be sure to
leave a clearance of at least 2.2 inches or 5.5cm
from the back of theTV.
Design and speciꢀcations are subject to change
without notice.
32PFL3605
•
Without TV stand
•
Dimension (WxHxD): 795.6 x 508.3
Warning
x 93 (mm)
• Follow all instructions provided with the TV
mount. Koninklijke Philips Electronics N.V.
bears no responsibility for improper TV
mounting that results in accident, injury or
damage.
•
Weight: 8.3 kg
•
With TV stand
•
Dimension (WxHxD): 795.6 x 556.2
x 221.5 (mm)
Weight: 9.9 kg
•
32PFL3615
TV screen
Required
Required
•
Without TV stand
size (inches) pitch (mm) mounting bolts
•
Dimension (WxHxD): 795.6 x 508.3
x 93 (mm)
32
42
200 x 200
300 x 200
4 x M6
4 x M6
•
Weight: 8.3 kg
•
With TV stand
•
Dimension (WxHxD): 795.6 x 556.2
x 221.5 (mm)
Weight: 9.9 kg
•
42PFL3605
•
Without TV stand
•
Dimension (WxHxD): 1018.5 x
635.7 x 83 (mm)
•
Weight: 11.5 kg
•
With TV stand
•
Dimension (WxHxD): 1018.5 x
683.5 x 236.4 (mm)
Weight:13.5 kg
•
42PFL3615
•
Without TV stand
•
•
Dimension (WxHxD): 1018.5 x
635.7 x 83 (mm)
Weight: 11.5 kg
•
With TV stand
•
•
Dimension (WxHxD): 1018.5 x
683.5 x 236.4 (mm)
Weight: 13.5 kg
26 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Cannot remove ‘e-sticker’ banner displayed on
theTV.
9 Troubleshooting
•
To remove the logos and images, set the
location of your TV to home.
1. Press MENU.
2. Select [Setup] > [Installation] >
[Preferences] > [Location].
3. Select [Home], then press OK.
This section describes commonly encountered
issues and accompanying solutions.
GeneralTV issues
TheTV does not switch on:
TV channel issues
•
Disconnect the power cable from the
power outlet. Wait for one minute then
reconnect it.
Previously installed channels do not appear in
the channel list:
•
Check that the power cable is securely
connected.
•
Check that the correct channel list is
selected.
The remote control is not working properly:
•
Check that the remote control batteries
are correctly inserted according to the
+/- orientation.
Picture issues
•
•
Replace the remote control batteries if
they are ꢁat or weak.
Clean the remote control and TV sensor
lens.
TheTV is on, but there is no picture:
•
Check that the antenna is properly
connected to the TV.
Check that the correct device is selected
as the TV source.
•
The standby light on theTV blinks red:
•
Disconnect the power cable from the
power outlet. Wait until the TV cools
down before reconnecting the power
cable. If the blinking reoccurs, contact
Philips Consumer Care.
There is sound but no picture:
•
Check that the picture settings are
correctly set.
There is poorTV reception from an antenna
connection:
You forgot the code to unlock theTV lock
feature
•
Check that the antenna is properly
connected to the TV.
•
Enter ‘8888’.
•
Loud speakers, unearthed audio devices,
neon lights, high buildings and other large
objects can inꢁuence reception quality.
If possible, try to improve the reception
quality by changing the antenna direction
or moving devices away from the TV.
If reception on only one channel is poor,
ꢀne tune this channel.
TheTV menu is in the wrong language.
•
Change the TV menu to your preferred
language.
When turning theTV on/off/to standby, you
hear a creaking sound from theTV chassis:
•
No action is required. The creaking sound
is normal expansion and contraction of
the TV as it cools and warms up. This
does not impact performance.
•
There is poor picture quality from connected
devices:
•
Check that the devices are connected
properly.
Check that the picture settings are
correctly set.
•
EN 27
Download from Www.Somanuals.com. All Manuals Search And Download.
TheTV did not save your picture settings:
•
•
If there are intermittent sound
•
Check that the TV location is set to the
home setting. This mode offers you the
ꢁexibility to change and save settings.
disruptions, check that output settings
from the HDMI device are correct.
If you use an HDMI-to-DVI adapter
or HDMI to DVI cable, check that an
additional audio cable is connected to
AUDIO IN (mini-jack only).
The picture does not ꢀt the screen; it is too
big or too small:
•
Try using a different picture format.
The picture position is incorrect:
•
Picture signals from some devices may
not ꢀt the screen correctly. Check the
signal output of the device.
Computer connection issues
The computer display on theTV is not stable:
•
Check that your PC uses the supported
resolution and refresh rate.
Set the TV picture format to unscaled.
Sound issues
•
There is picture but no sound from theTV:
Note
Contact us
• If no audio signal is detected, the TV
automatically switches the audio output off
— this does not indicate malfunction.
If you cannot resolve your problem, refer to
support.
•
Check that all cables are properly
connected.
•
•
Check that the volume is not set to 0.
Check that the sound is not muted.
If the problem remains unresolved, contact
Philips Consumer Care in your country as
listed in this user manual.
There is picture but sound quality is poor:
•
Check that the sound settings are
correctly set.
Warning
There is picture but sound comes from one
speaker only:
• Do not attempt to repair the TV yourself. This
may cause severe injury, irreparable damage to
your TV or void your warranty.
•
Verify that sound balance is set to the
center.
Note
• Make a note of your TV model and serial
number before you contact Philips. These
numbers are printed on the back of the TV
and on the packaging.
HDMI connection issues
There are problems with HDMI devices:
•
Note that HDCP (High-bandwidth Digital
Content Protection) support can delay
the time taken for a TV to display content
from a HDMI device.
If the TV does not recognize the HDMI
device and no picture is displayed, try
switching the source from one device to
another and back again.
•
28 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
10 Index
D
default settings
demo
17
17
8
devices
devices
A
analog
ꢀne-tune
add to home menu
remove
watch
9
9
8
18
digital services
disconnect USB
display
B
16
batteries
25, 4
26
bracket for wall mount
resolution
dispose
25
4
C
care
4
7
E
channel grid
channels
favorites list
ꢀne-tune
grid
EasyLink
disable
24
24
24
24
24
4
11
18
7
enable
one-touch play
one-touch standby
system audio control
end of life
install
automatic
manual
18
18
11
environmental care
e-sticker
4
16
list
lock
rename
13, 13
19
reorder/rearrange
skip channels
switch
troubleshooting
tune
19
F
19
factory settings
favorites list
create list
17
7
27
11
11
18
18
view list
ꢀne tune channels
child lock
lock channels
lock connected devices
PIN code
clock
13
13
13
H
HDMI
28, 20
16
display
12, 12
14
home mode
closed captions
computer
connect
display resolution
connect
I
28, 22
25
install channels
automatic
manual
18
18
PC
28, 22
connectors
HDMI
28, 20
20
overview
EN 29
Download from Www.Somanuals.com. All Manuals Search And Download.
K
R
Kensington lock
24
rearrange channels
reception
19
27, 18
4
recycle
L
register product
remote control
batteries
5
language
troubleshoot
list
27
11
16
25, 4
5
overview
favorites list
location
technical speciꢀcations
rename channels
reorder channels
resolution
25
19
19
25
17
home or shop
lock
Kensington lock
lock channels
lock connected devices
PIN code
24
13
13
13
restore default
S
safety
3
4
screen care
settings
M
menu
picture
sound
10
11
16
19
main menu
MPEG artifact reduction
multimedia
music
9
10
25
shop mode
skip channels
slideshow
view
with music
smart picture
smart settings
smart sound
software
version
USB
15
15
24
15
15
9
with slideshow
mute TV speakers
9, 11
11
O
on timer
13, 12
24
16
11, 11
25
one-touch play
one-touch standby
sound settings
speciꢀcations
standby
24
7
P
switch
PC
channels
on and off
source
7
7
8
connect
28
25
resolution
picture format
change
10
27
9
13
16
25
16
25
T
troubleshooting
picture settings
PIN code
pixel plus link
power
preferences
product speciꢀcations
technical speciꢀcations
timer
25
on timer
sleep timer
standby
12, 13
12
12
30 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
transmission
transporting
troubleshooting
TV lock
25, 27
3
27
lock channels
lock connected devices
PIN code
13
13
13
5
TV overview
U
USB
disconnect USB
listen to music
update software
view photos
16
15
16
15
V
video format
technical speciꢀcations
volume
25
adjust
8
11
11
automatic leveling
delta
mute
8, 24
W
wall mount
3, 26
EN 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
philips
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|