Philips Home Theater System HTS3544 User Manual

HTS3544  
HTS3555  
User Manual  
6
58  
Manuel D’utilisation  
Manual del usuario  
112  
welcome  
welcome  
welcome  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
12.  
Use only with the cart, stand,  
tripod,bracket,or table specied  
bythe manufacturer or sold with  
the apparatus.When a cart is  
used,use caution when moving  
the cart/apparatus combination  
to avoid injury from tip-over.  
4.  
Follow all instructions.  
5. Do not use this apparatus near  
water.  
13.Unplug this apparatus during lightning  
6. Clean only with dry cloth.  
storms or when unused for long periods of  
time.  
7. Do not block any ventilation  
openings. Install in accordance with  
the manufacturer´s instructions.  
14.Refer all servicing to quali ed service  
personnel.Servicing is required when the  
apparatus has been damaged in any way,  
such as power-supply cord or plug is  
8. Do not install near any heat sources  
such asardiatosr,heat registers,stoves,or  
other apparatus (including ampli ers)  
damaged,liquid has been spilled or objects  
have fallen into the apparatus,the apparatus  
has been exposed to rain or moi,sturedoes  
not operate normally, or has been dropped.  
that produce heat.  
9. Do not defeat the  
safety purpose of the  
15.Battery usage CAUTION To  
prevent battery leakage which may result in  
bodily injury,property damage,or damage  
to the unit:  
polarized or  
grounding-type plug.  
AC Polarized  
Plug  
A polarized plug has two blades with one  
wider than the other .Agrounding type  
plug has two blades and a third grounding  
prong.The wide blade or the third prong  
are provided for your safety.If the provided  
plug does not into your outlet, consult an  
Install all batter ies correctly,+and-as  
marked on the unit.  
n
Do not mix batteries (old and new or  
carbon and alkaline,etc.).  
ician for replacement of the obsolete  
electr  
Remove batteries when the unit is not used  
for a long time.  
outlet.  
10.Protect the power cord from being  
walked on or pinched particularly at  
plugs,convenience receptacles, and  
the pointwhere they exit from the  
apparatus.  
16. Apparatus shall not be exposed to  
dripping or splashing.  
17. Do not place any sources of danger  
on the apparatus (e.g. liquid filled  
objects, lighted candles).  
ch  
11. Only use attachments/accessories  
specied by the manufacturer.  
18. This product may contain lead and mercury.  
Disposal of these materials may be regulated  
due to environmental considerations.  
For disposal or recycling information,  
please contact your local authorities  
or the Electronic Industries Alliance :  
d
EL 6475-E005:04/01  
_
_
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION  
LASER  
Use of controls or adjustments or  
performance of procedures other than  
herein may result in hazardous radiation  
exposure or other unsafe operation.  
Type  
Semiconductor laser  
GaAIAs  
650 - 660 nm (DVD)  
784 - 796 nm (CD)  
7 mW (DVD)  
Wave length  
Output Power  
Beam divergence  
10 mW (VCD/CD)  
60 degrees  
ATTENTION  
L’utilisation des commandes ou réglages  
ou le non-respect des procédures ciincluses  
peuvent se traduire par une  
exposition dangereuse à l’irradiation.  
Canada  
English:  
ATENCIÓN  
This digital apparatus does not exceed  
the Class B limits for radio noise  
emissions from digital apparatus as set  
out in the Radio Interference  
El uso de mando o ajustes o la ejecucción  
de métodos que no sean los aquí descritos  
puede ocasionar peligro de exposición a  
radiación.  
Regulations of the Canadian  
Department of Communications.  
This Class B digital apparatus complies  
with Canadian ICES-003.  
Français:  
Cet appareil numérique n’emet pas de  
bruits radioélectriques dépassant les  
limites applicables aux appareils  
numériques de Class B prescrites dans  
le Règlement sur le Brouillage  
Radioélectrique édicté par le Ministère  
des Communications du Canada.  
‘CONSUMERS SHOULD NOTETHAT NOT ALL HIGH  
DEFINITIONTELEVISION SETS ARE FULLY  
COMPATIBLEWITHTHIS PRODUCT AND MAY CAUSE  
ARTIFACTSTO BE DISPLAYED INTHE PICTURE. IN  
CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE  
PROBLEMS, IT IS RECOMMENDEDTHATTHE USER  
SWITCHTHE CONNECTIONTOTHE ‘STANDARD  
DEFINITION’ OUTPUT. IFTHERE ARE QUESTIONS  
REGARDING OURTV SET COMPATIBILITYWITHTHIS  
MODEL 525p AND 625p DVD PLAYER, PLEASE  
Cet appareil numérique de la classe B est  
conforme à la norme NMB-003 du Canada.  
CONTACT OUR CUSTOMER SERVICE CENTER.’  
Declaration of Conformity  
This warning label is located on the rearside  
and inside this laser product.  
Model number:  
Trade Name:  
HTS3544, HTS3555  
Philips  
INVISIBLE  
:
CAUTION  
Responsible Party: Philips Consumer Electronics  
A Division of Philips Electronics  
NorthAmerica Corp.  
LASER RADIATION  
WHEN OPEN. DO NOT STARE INTO BEAM.  
INVISIBLE LASER RADIATIONWHEN OPEN.  
:
DANGERAVOID DIRECT EXPOSURETO BEAM.  
AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET  
P. O. Box 671539  
Marietta, GA 30006-0026  
1-800-PHILIPS (744-5477)  
VARO!  
ALTTIINANAKYMATTOMAALLE LASERSATEILYLLE. ALA  
KATSO SATEESEEN.  
OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD.  
OCH SPARREN AR URKOPPLAD. BETRAKTA EJ STRÅLEN.  
VARNING!  
or  
DANGER - Invisible laser radiation when open.  
AVOID DIRECT EXPOSURETO BEAM.  
ENERGY STAR and the ENERGY  
STAR mark are registered U.S. marks  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
English------------------------------------ 6  
Manufactured under license from Dolby  
Laboratories, “Dolby”, “Pro Logic” and the double-  
D symbol are trademarks of Dolby Laboratories.  
French -----------------------------------58  
Spanish -------------------------------- 112  
Manufactured under license from one or more of  
the following DTS, Inc. U.S. Pat. No’s: 5,451,942;  
5,956,674; 5,974,380; 5,978,762; 6,226,616;  
6,487,535 and other U.S. and world-wide patents  
issued and pending. ”DTS” and “DTS Digital  
Surround” are registered trademarks of DTS, Inc.  
Copyright 1996, 2002-2006, DTS, Inc. All Rights  
Reserved.  
Environmental information  
All unnecessary packaging has been omitted.  
We have tried to make the packaging easy to  
separate into three materials: cardboard  
(box), polystyrene foam (buffer) and  
polyethylene (bags, protective foam sheet.)  
Your system consists of materials which can  
be recycled and reused if disassembled by a  
specialized company. Please observe the local  
regulations regarding the disposal of  
packaging materials, exhausted batteries and  
old equipment.  
DivX Ultra Certified products: “DivX, DivX Ultra  
Certified, and associated logos are trademarks of  
DivX, Inc. and are used under license.  
Windows Media and the Windows logo are  
trademarks, or registered trademarks of Microsoft  
Corporation in the United States and/or other  
countries.  
HDMI, and HDMI logo and High-Definition  
Multimedia Interface are trademarks or registered  
trademarks of HDMI licensing LLC.  
NOTE: This equipment has been tested and found to  
comply with the limits for a Class B digital device, pursuant  
to Part 15 of the FCC Rules.These limits are designed to  
provide reasonable protection against harmful interference  
in a residential installation.This equipment generates, uses  
and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause  
harmful interference to radio communications. However,  
there is no guarantee that interference will not occur in a  
particular installation.  
iPod is a trademark of Apple Computer, Inc.,  
registered in the U.S. and other countries.  
If this equipment does cause harmful interference to radio  
or television reception, which can be determined by turning  
the equipment off and on, the user is encouraged to try to  
correct the interference by one or more of the following  
measures:  
- Reorient or relocate the receiving antenna.  
- Increase the separation between the equipment and  
receiver.  
- Connect the equipment into an outlet on a circuit different  
from that to which the receiver is connected.  
- Consult the dealer or an experienced radio/TV technician  
for help.  
This product incorporates copyright protection  
technology that is protected by method claims of  
certain U.S. patents and other intellectual property  
rights owned by Macrovision Corporation and  
other rights owners. Use of this copyright  
protection technology must be authorized by  
Macrovision Corporation, and is intended for  
home and other limited viewing uses only unless  
otherwise authorized by Macrovision Corporation.  
Reserve engineering or disassembly is prohibited.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of contents  
General  
General Information ........................................................................................................8  
Setup precautions.................................................................................................................................................8  
Accessories supplied ...........................................................................................................................................8  
Cleaning discs........................................................................................................................................................8  
About recycling.....................................................................................................................................................8  
Product Overview  
Main Unit ...........................................................................................................................9  
Remote Control.........................................................................................................10-12  
Using the remote control................................................................................................................................12  
Connections  
Basic Connections .....................................................................................................13-18  
Step 1 : Placing the speakers...........................................................................................................................13  
Step 2 : Connecting to TV.........................................................................................................................14-16  
Option 1: Using the Video jack ..............................................................................................................14  
Option 2: Using the S-Video jack ..........................................................................................................14  
Option 3: Connecting to a Progressive Scan TV or component video input............................15  
Option 4: Connecting to a HDMI-compatible TV ............................................................................15  
Option 5: Using an accessory RF modulator ......................................................................................16  
Step 3 : Connecting the FM and AM/MW antennas.................................................................................16  
Step 4 : Connecting speakers and subwoofer............................................................................................17  
Step 5 : Connecting the power cord ............................................................................................................18  
Optional Connections.................................................................................................... 19  
Connecting audio from TV .............................................................................................................................19  
Connecting to cable box/satellite receiver and recorder/VCR............................................................19  
Basic Setup  
Getting Started ........................................................................................................ 20-24  
Finding the correct viewing channel ............................................................................................................ 20  
Switching to different play source................................................................................................................ 20  
Setting language preferences.....................................................................................................................21-22  
On-screen display (OSD) language........................................................................................................21  
Audio, Subtitle and Menu language for DVD playback...............................................................21-22  
Setting the TV Display..................................................................................................................................... 22  
Setting up Progressive Scan feature..............................................................................................................23  
Setting the speakers’ channels........................................................................................................................24  
Disc Playback  
Disc Operations ........................................................................................................ 25-33  
Playable discs ...................................................................................................................................................... 25  
Playing a disc....................................................................................................................................................... 25  
Basic playback controls.....................................................................................................................................26  
Selecting various repeat/shuffle functions...................................................................................................26  
Programming disc tracks..................................................................................................................................27  
Other playback features for video discs (DVD/VCD/SVCD) ....................................................... 27~30  
Using the Disc Menu..................................................................................................................................27  
Viewing playback information................................................................................................................. 28  
Zooming in/out............................................................................................................................................. 28  
Changing subtitle language ..................................................................................................................... 28  
Switching camera angles........................................................................................................................... 28  
Changing sound track language...............................................................................................................29  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of contents  
Setting the delay times for audio playback...........................................................................................29  
Playback Control (VCD only)..................................................................................................................29  
Preview function (VCD/SVCD only) .................................................................................................... 30  
Playing a MP3WMA disc ..................................................................................................................................31  
Playing a JPEG image file (slide show) ..........................................................................................................32  
Playing MP3/WMA music and JPEG pictures simultaneously ................................................................33  
Playing a DivX disc .............................................................................................................................................33  
Playback other supported devices  
Playback - GoGear/iPod.................................................................................................34  
Playing music from compatible GoGear/iPod devices ........................................................................... 34  
Playback - USB device....................................................................................................35  
Playing from USB flash drive or USB memory card reader....................................................................35  
Playback - Other Audio Player .....................................................................................36  
Playing from other portable audio player....................................................................................................36  
Setup Options  
Setup Menu Options................................................................................................ 37-44  
Accessing the setup menu................................................................................................................................37  
General Setup Page........................................................................................................................................... 38  
Audio Setup Page.........................................................................................................................................39-40  
Video Setup Page......................................................................................................................................... 41-42  
Preference Setup Page...............................................................................................................................43-44  
Radio Tuning  
Radio Operations...................................................................................................... 45-46  
Tuning to radio stations................................................................................................................................... 45  
Presetting radio stations................................................................................................................................. 45  
Using auto install..................................................................................................................................45-46  
Using automatic preset............................................................................................................................. 46  
Using manual preset.................................................................................................................................. 46  
Selecting a preset radio station.................................................................................................................... 46  
Deleting a preset radio station...................................................................................................................... 46  
Others  
Sound and Volume Controls .........................................................................................47  
Volume control...................................................................................................................................................47  
Selecting surround sound.................................................................................................................................47  
Selecting digital sound effects.........................................................................................................................47  
Other Features................................................................................................................48  
Installing the latest software.......................................................................................................................... 48  
Specifications ..................................................................................................................49  
Troubleshooting........................................................................................................ 50-52  
Frequently Asked Questions (USB).............................................................................53  
Glossary...................................................................................................................... 54-55  
Limited Warranty...........................................................................................................56  
Language Code..............................................................................................................165  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Information  
WARNING!  
Accessories supplied  
This unit does not contain any user-  
serviceable parts. Please leave all  
maintenance work to qualified  
personnel.  
– 1 subwoofer  
– 1 center speaker  
– 2 front and 2 rear speakers  
– 1 remote control with batteries  
– 1 composite video cable (yellow)  
– 1 FM wire antenna  
Setup precautions  
– 1 docking station for Philips GoGear/  
Apple iPod with accessories  
– interconnect cable (to main unit)  
– 3.5mm video cable (to TV)  
– 8x iPod dock adaptors (white)  
– 2x GoGear dock adaptors (black)  
– Quick Start Guide  
Finding a suitable location  
– Place this unit on a flat, hard and  
stable surface. Never place the unit on a  
carpet.  
– Never place this unit on top of other  
equipment that might heat it up (e.g.,  
receiver or amplifier.)  
– Never put anything under this unit  
(such as, CDs, magazines.)  
– Install this unit near the AC outlet  
where the AC power plug can be easily  
reached.  
Cleaning discs  
To clean a disc, use a micro fi ber cleaning  
cloth and wipe the disc from the center  
to the edge in a straight line.  
Space for ventilation  
– Place this unit in a location with  
adequate ventilation to prevent internal  
heat build up. Allow at least 10 cm (4”)  
clearance from the rear and the top of  
this unit and 5cm (2”) from the left and  
right to prevent overheating.  
CAUTION!  
Never use solvents such as benzene,  
thinner, commercially available cleaners,  
or anti-static sprays intended for discs.  
Avoid high temperature, moisture,  
water and dust  
About recycling  
– This unit must not be exposed to  
dripping or splashing.  
– Never place any object or items that  
can damage this unit (e.g., liquid filled  
objects, lighted candles.)  
These operating instructions have been  
printed on non-polluting paper. The  
electronic equipment contains a large  
number of materials that can be recycled.  
If you are disposing of an old machine,  
please take it to a recycling center.  
Please observe the local regulations  
regarding disposal of packaging materials,  
exhausted batteries and old equipment.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Main Unit  
1
4
7
3
5
6
9
2
8
g VOL  
Adjusts the volume level.  
h MP3 LINE-IN jack  
Phono input for connecting to the  
headphone out jack on your portable  
audio player.  
Opens/closes the disc tray.  
i USB jack  
Input for USB flash drive or USB memory  
card reader.  
d Display panel  
e SOURCE  
Selects the relevant active source mode:  
DISC, FM, AM/MW, DOCK, TV, AUX,  
DI (DIGITAL IN) or MP3 LINE-IN.  
f í/ ë  
DISC: skips to the previous or next title/  
chapter/track.  
DISC: press and hold this button for fast  
forward and backward search.  
RADIO: selects a preset radio station.  
u
DISC: starts/pauses playback.  
RADIO: starts auto radio installation for  
first time setup.  
Ç
Exits an operation.  
DISC: stops playback.  
RADIO: press and hold this button to  
erase the current preset radio station.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
DOCK: switches to the GoGear/iPod  
that is connected to the docking station.  
1
2
c OPEN/CLOSE ç  
Opens/closes the disc tray.  
3
4
d PROGRAM  
DISC: starts programming.  
RADIO: press and hold this button to  
start automatic/ manual preset  
programming.  
5
6
e SETUP  
Enters or exits the system setup menu.  
7
8
f DISPLAY  
Displays the current status or disc  
information.  
9
Selects a different viewing angle of a DVD  
movie (if available.)  
g PLAY/PAUSE u  
DISC: starts/pauses playback.  
RADIO: starts auto radio installation for  
first time setup.  
10  
11  
12  
h STOP Ç  
Exits an operation.  
DISC: stops playback.  
RADIO: press and hold this button to  
erase the current preset radio station.  
i TV VOL +/-  
Adjusts the volume of the TV (for Philips  
TVs or compatible brands only.)  
a 2  
Turns on this unit or turns off to normal  
standby mode.  
j AUDIO SYNC  
Sets the audio output delay times if the  
video playback is slower than the audio  
output.  
b Source buttons  
DISC/USB: toggles between DISC or  
USB mode.  
RADIO: toggles between FM and AM/  
MW band.  
k REPEAT  
Selects various repeat or shuffle modes;  
turns off repeat or shuffle mode.  
TV: switches to TV mode. The sound  
from the TV output through the  
connected speaker system.  
AUX/DI: toggles between AUX and  
DIGITAL IN external source mode.  
MP3 LINE-IN: switches to audio device  
that is connected to the MP3 LINE-IN  
jack.  
l ZOOM  
Zoom in or out the picture on the TV.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control (continued)  
m DISC MENU  
For DVD, enters or exits disc contents  
menu.  
For VCD/SVCD, enters digest menu.  
n OK  
Confirms an entry or selection.  
13  
14  
o v V b B  
DISC: selects movement direction in the  
menu.  
DISC: press left or right for fast forward  
and backward search.  
RADIO: press up or down to tune the  
radio frequency.  
15  
16  
17  
RADIO: press left or right to start auto  
search.  
18  
19  
p TITLE ꢀ  
20  
21  
22  
For DVD, go back to the previous menu.  
For VCD version 2.0 only;  
During playback, display the disc title  
menu or return to the main menu.  
23  
24  
q PREVí / NEXT ë  
DISC: skips to the previous or next title/  
chapter/track.  
RADIO: selects a preset radio station.  
r MUTE %  
Mutes or restores the volume.  
s VOL +/-  
Adjusts the volume level.  
w SUBTITLE  
Selects a DVD subtitle language.  
t SURROUND  
Selects multi-channel surround or  
stereo mode.  
x AUDIO  
DISC: selects an audio language/channel.  
u Numeric keypad 0-9  
Enters a track/title number of the disc.  
Enters a number of a preset radio station.  
v SOUND  
Selects a predefined sound effect.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control (continued)  
CAUTION!  
Using the remote control  
– Remove batteries if they are  
exhausted or if the remote control  
is not to be used for a long time.  
– Never mix batteries (old and new  
or carbon and alkaline, etc.).  
– Batteries contain chemical  
substances, they should be disposed  
of properly.  
A Open the battery compartment.  
B Insert two batteries type R03 or AAA,  
following the indications (+-) inside  
the compartment.  
C Close the cover.  
D Point the remote control directly at the  
remote sensor (iR) on the front panel.  
E Select the source you wish to control by  
pressing the DISC/USB, RADIO, AUX/DI,  
MP3 LINE-IN, DOCK or TV button on  
the remote control.  
F Then select the desired function (for  
example í, ë.)  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Connections  
FRONT  
LEFT  
REAR  
LEFT  
CENTER  
FRONT  
RIGHT  
REAR  
RIGHT  
Helpful Hints:  
Step 1: Placing the speakers  
– The placement diagram shown here is  
only a guideline that provides great system  
performance. You may find other  
placement choices that are more suitable for  
your room layout that provide the sound  
experience you enjoy.  
The Philips Home Theater System is  
simple to install. However, proper  
system placement is critical to ensure an  
optimum sound experience.  
– To avoid magnetic interference, never  
position the front speakers too close to your  
TV.  
– The rear speakers are labeled as REAR  
LEFT or REAR RIGHT.  
A Place the front left and right speakers at  
equal distances from the TV and at an  
angle of approximately 45 degrees from  
the listening position.  
– The front speakers are labeled as  
FRONT LEFT or FRONT RIGHT.  
– For speaker setting, see ‘Getting Started -  
Setting the speakers’ channel.’  
B Place the center speaker above the TV or  
the main unit so that the center channel’s  
sound is localized.  
C Place the rear speakers at normal  
listening ear level facing each other or  
hang on the wall.  
D Place the subwoofer at the corner of the  
room. Otherwise, keep it at least one  
meter away from the TV.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Connections (continued)  
Option 2  
Option 1  
DOCK  
Option 1: Using theVideo jack  
Step 2: Connecting toTV  
Use the supplied composite video cable  
(yellow) to connect the CVBS jack on  
the main unit to the video input jack (or  
labeled as A/V In, Video In, Composite or  
Baseband) on the TV.  
This connection enables you to view the  
video playback from this unit. You only  
need to choose one of the options  
below to make the video connection.  
– For a standard TV, follow option 1 or  
2.  
It provides good picture quality.  
– For a progressive scan TV, follow  
option 3.  
Option 2: Using the S-Video jack  
– For a HDMI TV, follow option 4.  
– For TV with only a single antenna  
input jack, follow option 5.  
Use an S-video cable (not supplied) to  
connect the S-VIDEO jack on the main  
unit to the S-Video input jack (or labeled  
as Y/C or S-VHS) on the TV.  
It provides excellent picture quality.  
Helpful Hints:  
– It is important to connect this unit directly  
to the TV in order to enjoy optimum video  
quality.  
– To hear the TV channels through this unit,  
connect the AUDIO IN jacks to the  
corresponding AUDIO output jacks on the TV  
using an audio cable. Press TV on the remote  
control when watching the TV programs.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Connections (continued)  
Option 3  
Option 4  
DOCK  
Option 3: Connecting to a  
Progressive ScanTV or component  
video input  
Option 4: Connecting to a HDMI-  
compatibleTV  
HDMI (High Definition Multimedia  
Interface) is a digital interface that allows  
pure digital video transmission without  
the loss of image quality.  
The progressive scan video quality is  
only available when using Y Pb Pr  
connection and a progressive scan TV is  
required. It provides superior picture  
quality when watching DVD movies.  
A Use the HDMI cable (not supplied) to  
connect the HDMI OUT on the main  
unit to the HDMI IN on a HDMI-  
compatible device (e.g., HDMI TV, HDCP  
compliant DVI TV.)  
A Use the component video cables (red/  
blue/green - not supplied) to connect the  
Y Pb Pr jacks on the main unit to the  
corresponding component video input  
jacks (or labeled as Y Pb/Cb Pr/Cr or  
YUV) on the TV.  
B When you have completed the necessary  
connections, installation and set-up, see  
‘Audio Setup Page and Video Setup Page’  
for optimum HDMI audio and video  
settings.  
B If your TV accepts progressive signals,  
proceed to chapter ‘Getting Started -  
Setting up Progressive Scan feature’ for  
detailed progressive feature setup.  
Helpful Hints:  
– The HDMI is backward compatible with  
some DVI devices using an appropriate  
adaptor plug.  
– If a DVI device is connected, an additional  
audio cable is required for audio transmission.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Connections (continued)  
AM/MW antenna  
FM  
antenna  
2
ꢀx the claw  
into the slot  
Antenna  
1
DOCK  
Option 5: Using an accessory RF  
modulator  
If your TV has only a single Antenna Input  
jack (labeled as 75 ohm or RF In,) you  
Step 3: Connecting the FM  
and AM/MW antennas  
need an RF modulator in order to view  
the DVD playback on the TV. See your  
electronics retailer or contact Philips for  
details about RF modulator availability  
and operations.  
A Connect AM/MW loop antenna (not  
supplied) to the AM/MW jack. Place  
the AM/MW loop antenna on a shelf,  
or attach it to a stand or wall.  
B Connect the supplied FM antenna to the  
FM 75 Ω jack. Extend the FM antenna  
and ꢀx its ends to the wall.  
A Use the supplied composite video cable  
(yellow) to connect the main unit’s  
CVBS jack to the video input jack on the  
RF modulator.  
For better FM stereo reception, connect  
an external FM antenna (not supplied.)  
B Use an RF coaxial cable (not supplied) to  
connect ANTENNA OUT or TO TV jack  
on the RF modulator to the ANTENNA  
IN jack on the TV.  
Helpful Hints:  
– Adjust the position of the antennas for  
optimal reception.  
– Position the antennas as far away as  
possible from your TV, VCR or other  
radiation source to prevent any unwanted  
interference.  
C Connect the Antenna or Cable TV  
service signal to the ANTENNA IN or RF  
IN jack on the RF modulator. (It may  
have been connected to your TV  
previously. Disconnect it from the TV.)  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Connections (continued)  
FRONT  
LEFT  
FRONT CENTER  
FRONT  
RIGHT  
SUBWOOFER  
REAR RIGHT  
REAR LEFT  
DOCK  
Step 4: Connecting speakers  
and subwoofer  
Connect all the speakers and subwoofer  
to the matching jacks at the rear of the  
main unit. Make sure that the colors of  
the plugs and jacks are matched.  
Helpful Hint:  
– To prevent unwanted noise, never place  
the speakers too close to the main unit,  
subwoofer, AC power adapter, TV or any  
other radiation sources.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Connections (continued)  
DOCK  
Step 5: Connecting the  
power cord  
After everything is connected  
properly, connect the AC power  
cord into the power outlet.  
The standby LED on the main unit lights  
up.  
Helpful Hints:  
– Refer to the type plate at the rear or  
bottom of the product for identification and  
supply ratings.  
– Before making or changing any  
connections, make sure that all the devices  
are disconnected from the power outlet.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optional Connections  
AUDIO OUT  
DOCK  
Cable/  
Satellite Box  
DIGITAL  
OUT  
L
R
DOCK  
DVD Recorder/VCR  
Connecting audio fromTV  
Connecting to cable box/  
satellite receiver and  
recorder/VCR  
When connecting the audio output from  
your TV to this Home Theater System,  
you can have the sound of the TV output  
on all the speakers. It enables you to  
enjoy the multi-channel surround sound  
capabilities.  
This unit provides analog and digital audio  
connection. You can connect the audio  
output from an audio/video device (e.g.  
DVD Recorder, VCR, Cable/Satellite  
Box) to this Home Theater System in  
order to enjoy the multi-channel  
Use an audio cable (red/white - not  
supplied) to connect the AUDIO IN-TV  
jacks on the main unit to the AUDIO  
OUT jacks on the TV.  
surround sound capabilities.  
Use an audio cable (red/white - not  
supplied) to connect the AUDIO IN-  
AUX jacks on the main unit to the  
AUDIO OUT jacks on the connected  
device.  
To listen to the sound, press TV on the  
remote control as the sound source that  
you want to listen to.  
To listen to the sound, press AUX/DI to  
select ‘AUX’ as the sound source that  
you want to listen to.  
Or  
Use a coaxial cable (not supplied) to  
connect the COAXIAL DIGITAL IN  
jack on the main unit to the DIGITAL  
output jack on the connected device.  
To listen to the sound, press AUX/DI to  
select ‘DI’ as the sound source that you  
want to listen to.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Finding the correct viewing  
channel  
Switching to different play  
source  
Press the SOURCE button on the front  
panel repeatedly to select :  
DISC ¤ FM ¤ AM ¤ DOCK ¤ TV  
¤ AUX ¤ DI ¤ MP3 LINE-IN  
¤ DISC ....  
A Press SOURCE button on the main unit  
until ‘DISC’ appears on the display panel  
(or DISC/USB on the remote control.)  
B Turn on the TV and switch it to the  
correct video-in channel.  
You may go to the lowest channel on  
your TV, then press the Channel Down  
button on your TVs remote control until  
you see the Video In channel.  
You may press °button repeatedly  
on your TV’s remote control.  
Or  
Usually this channel is between the  
lowest and highest channels and may be  
called FRONT, A/V IN, VIDEO, etc..  
If you are using a RF modulator, set  
the TV to channel 3 or 4.  
Press DISC/USB, RADIO, DOCK,  
TV, AUX/DI or MP3 LINE-IN on the  
remote control.  
Press DISC/USB to toggle between  
DISC and USB mode (if USB is detected.)  
Press RADIO to toggle between FM  
and AM/MW band.  
Refer to your TVs user manual on  
how to select the correct input on your  
TV.  
Press DOCK for connecting to the  
iPod/GoGear player that is attached to  
the docking station.  
If the audio input on this unit is  
connected to your TV, press TV to hear  
the TVs sound output through this unit.  
Press AUX/DI to switch to the  
additional audio device that is connected  
to the AUDIO IN-AUX or COAXIAL  
DIGITAL IN jack on this unit.  
Press MP3 LINE-IN to switch to the  
portable audio player that is connected  
to the MP3 LINE-IN jack on this unit.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started (continued)  
Audio, Subtitle and Menu language  
for DVD playback  
Setting language preferences  
You can select your preferred language  
settings for DVD playback. If the  
selected language is recorded on the  
DVD disc, this unit will automatically play  
the disc in that language. Otherwise, the  
disc’s default language will be used  
instead.  
The language options are different  
depending on your country or region. It  
may not correspond to the illustrations  
shown on the user manual.  
On-screen display (OSD) language  
The OSD (On-Screen Display) language  
for this unit remains as you have set it,  
regardless of the changes made to the  
DVD disc language.  
A Press Çtwice to stop playback (if any,)  
then press SETUP.  
B Press repeatedly to select  
{ Preference Page. }  
A In disc mode, press SETUP on the  
remote control.  
C Use keys to select one of the  
{ General Setup Page } appears.  
options below and press .  
B Press to highlight { OSD Language }  
in the menu and press .  
Preference Page  
Audio  
English  
Subtitle  
Chinese (Simp)  
French  
Spanish  
Portuguese  
Polish  
Disc Menu  
Parental  
Surround  
PBC  
MP3/JPEG Nav  
Password  
General Setup Page  
Disc Lock  
Display Dim  
Program  
Italian  
Turkish  
OSD Language  
English  
Screen Saver  
Sleep  
DivX(R) VOD Code  
Espanõl  
Français  
{ Audio }  
Select the preferred audio language for  
DVD playback.  
C Use keys to select a language and  
{ Subtitle }  
press OK to confirm.  
Select the preferred subtitle language for  
DVD playback.  
{ Disc Menu }  
Select the preferred disc menu language  
for DVD playback.  
D Use keys to select a language and  
press OK to confirm.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started (continued)  
If the language you want is not  
available in the list, select { Others. }  
Use the numeric keypad (0-9) on the  
remote control to enter the 4-digit  
language code ‘XXXX’ (see last page) and  
press OK to confirm.  
Setting theTV Display  
Set the aspect ratio of this unit according  
to the TV type you have connected. The  
format you select must be available on  
the disc. If it is not, the setting for TV  
display will not affect the picture during  
playback.  
E Repeat steps C ~ D for other settings.  
Helpful Hints:  
– During DVD playback, you can switch the  
audio and subtitle languages by pressing the  
AUDIO and SUBTITLE buttons on the  
remote control. However, this does not  
change the default settings you have made  
here.  
– For some DVDs, the subtitle/audio/menu  
language can only be changed via the DVD  
disc menu.  
A In disc mode, press SETUP on the  
remote control.  
B Press repeatedly to select { Video  
Setup Page. }  
C Press to highlight { TV Display } in  
the menu and press .  
Video Setup Page  
TV Type  
TV Display  
4:3 Pan Scan  
Progressive  
Picture Setting  
HDMI Setup  
Closed Caption  
4:3 Letter Box  
16:9 Wide Screen  
{ 4:3 Pan Scan }  
Select this if you have a  
conventional TV and  
want both sides of the  
picture to be trimmed or formatted  
to fit your TV.  
{ 4:3 Letter Box }  
Select this if you have a  
conventional TV. In this  
case, a wide picture with  
black bands on the upper and lower  
portions of the TV will be displayed.  
{ 16:9 Wide Screen }  
Select this if you have a  
wide-screen TV.  
D Select one of the options and press OK  
to confirm.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started (continued)  
F Read the notification message on the TV  
and confirm your action by selecting the  
in the menu and press OK.  
Setting up Progressive Scan  
feature  
There will be no picture on your TV  
at this state until you have turned  
on the progressive scan mode on  
your TV.  
(for Progressive Scan TV only)  
The progressive scan displays twice the  
number of frames per second than  
interlaced scanning (ordinary normal TV  
system.) With nearly double the number  
of lines, progressive scan offers higher  
picture resolution and quality.  
G Turn on your TV progressive scan mode,  
refer to your TVs user manual.  
A message appears on the TV.  
Before you start...  
H Confirm your action by selecting the  
in the menu and press OK.  
Ensure that you have connected this unit  
to a progressive scan TV using the  
Y Pb Pr connection (see ‘Option 3:  
Connecting to a Progressive Scan TV or  
component video input’.)  
The setup is now completed and you  
can start to enjoy the high quality picture.  
If no picture is displayed  
A Turn on the TV to the correct viewing  
channel for the this unit.  
A Press OPEN/CLOSE ç.  
B Press on the remote control.  
C Press AUDIO on the remote control.  
Make sure that the TVs progressive  
scan mode is turned off (or set to  
interlaced mode.) Refer to your TVs user  
manual.  
Helpful Hints:  
– If a blank/distorted screen appears, wait  
for 15 seconds for the auto recovery.  
– There are some progressive scan TVs that  
are not fully compatible with this unit,  
resulting in an unnatural picture when  
playing back a DVD VIDEO disc in the  
progressive scan mode. In such a case, turn  
off the progressive scan feature on this unit  
and your TV.  
B Turn on this unit and press DISC/USB  
on the remote control.  
C Press SETUP on the remote control.  
D Press repeatedly to select { Video  
Setup Page. }  
Video Setup Page  
TV Type  
TV Display  
Progressive  
Picture Setting  
HDMI Setup  
Off  
On  
Closed Caption  
E Move to { Progressive } > { On } in the  
menu and press OK to confirm.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started (continued)  
E Use keys to highlight { Speakers  
Setting the speakers’  
channels  
Delay } and press  
.
Audio Setup Page  
You can adjust the delay times (center  
and surround only) and volume level for  
individual speakers. These adjustments let  
you optimize the sound according to  
your surroundings and setup.  
Speakers Volume  
Speakers Delay  
HDMI Audio  
CD Upsampling  
Audio Sync  
Speakers Distance Setup  
Center  
0ms  
Rear Left  
Rear Right  
0ms  
0ms  
Before you start...  
Stop the disc playback by pressing STOP  
button twice or remove the disc from  
the disc tray. Otherwise, the settings are  
not accessible.  
F Use keys to set the delay times  
(0 ms ~ 15 ms) for centre and rear  
speakers that best suit your surround  
sound needs.  
A In disc mode, press SETUP on the  
remote control.  
G Press OK to confirm.  
B Press repeatedly to select { Audio  
Helpful Hints:  
Setup Page. }  
– A 1ms increase/decrease of delay time is  
equivalent to 30 cm change in distance.  
– Use the longer delay time settings when  
the rear speakers are closer to the listener  
than the front speakers.  
– The test tone will be automatically  
generated to help you judge the sound level  
of each speaker.  
C Press to highlight { Speakers  
Volume } and press  
.
Audio Setup Page  
Speakers Volume  
Speakers Delay  
HDMI Audio  
CD Upsampling  
Audio Sync  
Speakers Level Setup  
Front Left  
Front Right  
0dB  
0dB  
0dB  
0dB  
Center  
Subwoofer  
Rear Left  
Rear Right  
0dB  
0dB  
D Use keys to set the volume level for  
each speaker (-6dB ~ +6dB) and press  
OK to confirm.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc Operations  
Notes:  
Playable discs  
– If the inhibit icon (ø or X) appears  
on the TV when a button is pressed,  
it means the function is not  
available on the current disc or at  
the current time.  
– Never put any objects other than  
discs on the disc tray. Doing so may  
cause the disc player to malfunction.  
Playing a disc  
Your DVD home theater system  
plays:  
– Digital Versatile Discs (DVDs)  
A Press SOURCE repeatedly until ‘DISC’  
appears on the display panel (or press  
DISC/USB on the remote control.)  
– Video CDs (VCDs)  
– Super Video CDs (SVCDs)  
– Finalized DVD Recordable (DVD R),  
DVD Rewritable (DVD RW)  
– Audio Compact Discs (CDs)  
– MP3/ Windows Media™ Audio discs,  
picture (Kodak, JPEG) files on  
CD-R(W)  
B Turn on the TV to the correct viewing  
channel for this unit.  
The blue DVD background screen  
appears on the TV.  
C Press OPEN/CLOSE çto open the  
disc tray.  
ISO 9660/UDF format  
JPEG resolution support up to  
3072 x 2048  
D Load a disc and press OPEN/CLOSE  
çto close the disc tray.  
Supported sampling frequencies :  
32 kHz, 44.1 kHz, 48 kHz  
Supported Bit-rates : 32~256 (kbps),  
variable bit rates (average 128 kbps)  
Make sure the disc label is facing up.  
For double-sided discs, load the side  
which you want to play facing up.  
E Playback starts automatically.  
See the following pages for more  
playback options and features.  
– DivX files on CD-R(W)/DVD+R(W):  
DivX 3/4/5/6, DivX Ultra  
Region Codes for DVD discs  
DVD discs and players are designed with  
regional restrictions. Before playing a disc,  
make sure the disc is for the same region  
as your player. The regional code for this  
unit is indicated at the rear or bottom  
panel.  
Helpful Hints:  
– If you are having trouble playing a certain  
disc, remove the disc and try a different one.  
Improperly formatted discs cannot be played  
on this unit.  
– Some discs cannot be played on this player  
due to the configuration and characteristics  
of the disc, or due to the condition of  
recording and authoring software that was  
used.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc Operations (continued)  
Basic playback controls  
Selecting various repeat/  
shuffle functions  
Pausing playback  
The available of the repeat play options  
and shuffle play mode are vary depending  
on the disc type.  
During playback, press u.  
While in pause mode, you can press  
to step forward one frame at each  
press.  
While playing a disc, press  
REPEAT on the remote control  
repeatedly to choose a repeat/shuffle play  
mode.  
To resume playback, press u again.  
Selecting another track/chapter  
Press í/ ëor use the numeric  
keypad 0-9 to key in a track/chapter  
number.  
DVD  
RPT ONE (repeat chapter)  
RPT TT (repeat title)  
SHUFFLE (random play)  
RPT SHF (repeat random play)  
RPT OFF (exit repeat mode)  
If the repeat track mode is active,  
press  
again to replay the same track/  
chapter.  
Searching backward/forward  
Press m / M on the remote control.  
While searching, press m / M  
repeatedly to decrease/increase the  
search speed.  
VCD/SVCD/CD  
RPT ONE (repeat track)  
RPT ALL (repeat disc)  
SHUFFLE (random play)  
RPT SHF (repeat random play)  
RPT OFF (exit repeat mode)  
To resume normal playback, press  
u.  
Stopping playback  
Press Ç.  
MP3/DivX/Windows Media™ Audio  
RPT ONE (repeat track)  
RPT ALL/FLD (repeat folder)  
SHUFFLE (random play)  
RPT OFF (exit repeat mode)  
Helpful Hints:  
– If the message ‘To playback from the  
beginning, press PREV key’ appears on the  
TV while you load in a disc, you can press  
íto start playback from the beginning.  
– This is a power-saving feature, this unit will  
automatically switch to standby mode if you  
do not press any buttons within 15 minutes  
after a disc has stopped playing.  
Helpful Hint:  
– Repeat playback is not possible on VCDs  
when the PBC mode is turned on.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc Operations (continued)  
Programming disc tracks  
Other playback features  
for video discs (DVD/VCD/  
SVCD)  
(not for Picture CD/MP3 discs)  
You can play the contents of the disc in  
the order you want by programming the  
playing order of the tracks.  
A Press PROGRAM on the remote  
control.  
The programming menu appears.  
Program:Track (01-16)  
6
7
2
12  
8
9
10  
Exit Start Next  
B Use the numeric keypad (0-9) to  
enter a valid track/chapter number.  
Note:  
C Use ꢄꢂꢃkeys to move the cursor to  
The operating features described here  
might not be possible for certain discs.  
Always refer to the instructions supplied  
with the discs.  
the next position.  
If there are more than ten total program  
tracks, select { Next } on the screen and  
press OK (or press ëon the remote  
control) to access the next programming  
page.  
Using the Disc Menu  
Depending on the disc format, a menu  
may appear on the TV screen once you  
load the disc.  
To remove the track/chapter from the  
programming menu, select the track/  
chapter and press OK.  
To select a playback feature or item  
D Once complete, select { Start } on the  
screen and press OK to start playback.  
Playback starts from the selected track  
under the programmed sequence.  
Use ꢄꢂꢃkeys or numeric keypad  
0-9 on the remote control, then press  
OK to start playback.  
To access or remove the menu  
Press DISC MENU on the remote  
control.  
E To exit the program menu, select  
{ Exit } in the menu and press OK.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc Operations (continued)  
Viewing playback information  
Zooming in/out  
This unit can display the disc playback  
information (for example, title or chapter  
number, elapsed playing time, audio/  
subtitle language) and a number of  
operations can be done without  
interrupting disc playback.  
This option allows you to zoom in or out  
the picture on the TV and to pan through  
the picture.  
A During playback, press ZOOM  
repeatedly to select a different zoom  
factor.  
A During playback, press DISPLAY.  
A list of available disc information  
appears on the TV.  
Playback continues.  
B Use ꢄꢂꢃkeys to pan through the  
zoomed image.  
DVD  
C Press ZOOM repeatedly to return to  
the original size.  
Menu  
01/01  
02/99  
2ch  
Title  
Chapter  
Changing subtitle language  
Audio  
Chi  
This operation works only on DVDs with  
multiple subtitle languages. You can  
change the language you want while  
playing a DVD.  
Subtitle  
Off  
Bitrate 7  
Title Elapsed  
VCD/SVCD  
Press SUBTITLE repeatedly to select  
Menu  
different subtitle languages.  
Track  
09/16  
1:16:05  
0:04:32  
Off  
DiscTime  
TrackTime  
Repeat  
Switching camera angles  
Bitrate 8  
Total Elapsed  
This option is only available on DVDs  
that contain sequences recorded from  
different camera angles. This allows you  
to view the picture from different angles.  
B Use keys to view the information  
and press OK to access.  
C Use the numeric keypad 0-9 to input  
the number/time or use keys to  
make the selection,  
A During playback, press DISPLAY,  
Playback information menu appears.  
B Press V to highlight ‘ANGLE’ function in  
D Press OK to confirm.  
the menu.  
Playback changes according to the  
chosen time or to the selected title/  
chapter/track.  
C If different camera angles choices are  
available, press B and numeric keys to  
select.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc Operations (continued)  
Changing sound track language  
Playback Control (VCD only)  
This operation works only on DVDs with  
multiple sound track languages, or VCDs  
with multiple audio channels.  
Playback Control (PBC) playback allows  
you to play Video CDs interactively,  
following the menu on the display. The  
PBC feature on this unit is turned on by  
default.  
Press AUDIO repeatedly to select the  
available audio languages.  
For VCDs with Playback Control  
(PBC) feature (version 2.0 only)  
For VCD – changing the audio  
channel  
Press AUDIO repeatedly to select the  
available audio channels provided by the  
disc (STEREO, MONO LEFT, MONO  
RIGHT or MIX MONO.)  
During playback, press TITLE to  
return to the disc title menu or main  
menu.  
Helpful Hint:  
– Set your preferred default PBC setting in  
the setup menu, see ‘Setup Menu Options -  
{ Preference Page }.’  
Setting the delay times for audio  
playback  
This feature allows you to adjust the  
audio delay times if the video playback is  
slower than the audio output streams,  
hence resulting in ‘Lip-sync’. The only  
way to correct ‘Lip-sync’ error caused by  
delayed video is to delay audio by equal  
amount.  
A Press AUDIO SYNC  
B Within five seconds, use the VOL +-  
to set the audio output delay times (0 ~  
200 ms).  
If the volume control is not used  
within five seconds, it will resume its  
normal volume control function.  
Helpful Hint:  
– Set your preferred default AUDIO SYNC  
setting in the setup menu, see ‘Setup Menu  
Options - { Audio Setup Page }.’  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc Operations (continued)  
To go to the previous or next page, press  
í/ ë.  
Preview function (VCD/SVCD only)  
This function allows you to preview the  
contents of a VCD/SVCD.  
To return to the main menu, select  
{ Menu } on the screen and press OK.  
A Press DISC MENU.  
Press OK on the selected thumbnail  
picture to start playback from there.  
Select Digest Type:  
Track Digest  
Disc Interval  
Track Interval  
C To exit the preview menu, select  
{ Exit } on the screen and press OK.  
B Use keys to select one of the  
following options and press OK.  
{ Track Digest }  
View six different tracks on one screen  
each time. It allows you to have a quick  
glance at all the tracks on the disc.  
{ Disc Interval }  
View the whole disc in six thumbnail  
pictures. It divides a disc into six  
portions at regular intervals and displays  
them on one screen.  
{ Track Interval }  
View the content of a single track in six  
thumbnail pictures. It divides a single  
track into six portions at regular intervals  
and displays them on one screen.  
This option is only available during  
playback mode.  
01  
02  
03  
04  
05  
06  
Exit  
Menu  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc Operations (continued)  
During playback;  
Playing a MP3/WMA disc  
Press í/ ëto playback another track/  
file in the current folder.  
This unit can playback most of the MP3  
and Windows Media™ Audio files  
recorded on a recordable disc or  
commercial CD.  
Press m / M to fast reverse/forward  
search for a music track.  
To select another folder from the  
current disc, press repeatedly to  
highlight ‘Previous’ folder and press OK  
to return to the root menu.  
Before you start ...  
Turn on your TV to the correct Video In  
channel. See ‘Finding the correct viewing  
channel’ for details.  
Press REPEAT repeatedly to access  
various play modes.  
A Insert a MP3/WMA disc.  
The disc reading time may exceed 30  
seconds due to the complexity of the  
directory/file configuration.  
D To stop playback, press Ç.  
Helpful Hints:  
– To skip the folders menu when you load a  
MP3/JPEG disc, set the MP3/JPEG NAV  
setting in the Preference Setup Page to  
{ Without Menu. }  
– Only the first session of a multi-session CD  
will be played back.  
– It is normal to experience an occasional  
“skip” while listening to your MP3/WMA disc  
due to poor clarity of digital contents during  
internet downloading.  
The disc menu appears on the TV.  
00:06 04:04  
\UDF_MP3\  
001/018  
Previous  
08-AudioTrack  
09-AudioTrack  
10-AudioTrack  
11-AudioTrack  
12-AudioTrack  
13-AudioTrack  
14-AudioTrack  
000  
018  
000 Disc  
– If any special characters are present in the  
MP3/WMA track name (ID3) or album  
name, it might not be displayed correctly on  
the screen because this unit does not support  
the characters.  
B If the disc main menu contains various  
folders, use keys to select a desired  
folder and press OK to open the folder.  
C Use keys to select a track/file and  
press OK to start playback.  
Playback starts from the selected file  
and continue through to the end of the  
folder.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc Operations (continued)  
Preview function  
Playing a JPEG image file  
(slide show)  
A During playback, press Ç.  
12 thumbnail pictures will be displayed  
on the TV.  
Before you start ...  
Turn on your TV to the correct Video In  
channel. See ‘Finding the correct viewing  
channel’ for details.  
Insert a JPEG photo CD (Kodak Picture  
CD, JPEG.)  
For a Kodak disc, the slide show  
begins automatically.  
For a JPEG disc, the picture menu  
appears on the TV. Press u to start the  
slide-show playback.  
B Press í/ ëto display the other  
pictures on the previous/next page.  
Helpful Hint:  
C Use ꢄꢂꢃkeys to select one of the  
– It may require longer time for this unit to  
display the disc content on the TV due to the  
large number of songs/pictures compiled into  
one disc.  
pictures and press OK to start playback.  
D Press DISC MENU to return to Picture  
CD menu.  
Zoom picture  
Supported file format:  
– The file extension has to be ‘*.JPG’  
and not ‘*.JPEG’.  
A During playback, press ZOOM  
repeatedly to select a different zoom  
factor.  
– This unit can only display digital camera  
pictures according to the JPEG-EXIF  
format, typically used by almost all digital  
cameras. It cannot display Motion JPEG,  
progressive JPEG and other JPEG  
formats, or pictures in formats other  
than JPEG, or sound clips associated with  
pictures.  
B Use ꢄꢂꢃkeys to pan through the  
zoomed image.  
Rotating/flipping the picture  
During playback, use ꢄꢂꢃkeys to  
rotate/flip the picture on the TV.  
: flip the picture vertically  
: flip the picture horizontally  
: rotate the picture anti-clockwise  
: rotate the picture clockwise  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc Operations (continued)  
Playing MP3/WMA music and  
JPEG pictures simultaneously  
Playing a DivX disc  
This unit supports the playback of DivX  
movies which you can copy from your  
computer onto a recordable disc. See  
‘Setup Menu Options - { General Setup  
Page - DivX(R) VOD code }’ for details.  
You can create a musical slide show if the  
disc contains both the MP3/WMA music  
and JPEG picture files.  
A Insert a MP3/WMA disc that contains  
A Insert a DivX disc.  
music and pictures.  
B Use keys to navigate to the  
B Select a track in the menu and press u  
title you want to play.  
to start playback.  
C Press OK to start playback.  
C During music playback, use keys to  
select a picture file from the disc menu  
During playback;  
and press  
.
OK  
The picture files will be played back  
through to the end of the folder.  
The music keeps playing back and will  
be repeated if reaches the end of the  
selected album, playlist or track.  
If the DivX disc has multilingual subtitles,  
you can press SUBTITLE on the  
remote control to change the subtitle  
language.  
If the DivX title has different audio  
tracks, you can press AUDIO on the  
remote control to change the audio  
stream.  
D To stop simultaneous playback, press  
DISC MENU followed by x.  
Use m / M keys on the remote  
control to perform fast reverse/forward  
search.  
Press DISPLAY repeatedly until the  
Time Search menu appears, key in the  
time where playback should start.  
Playback skips to the time entered.  
Helpful Hints:  
– Subtitle files with the following file name  
extensions (.srt, .smi, .sub, .ssa, .ass) are  
supported but do not appear on the file  
navigation menu.  
– The subtitle file name has to be the same  
as the file name of the movie.  
– The subtitle can only be displayed up to an  
average of 45 characters.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback - GoGear/iPod  
Playing from GoGear/iPod  
Playing music from  
compatible GoGear/iPod  
devices  
Music on your Philips GoGear/Apple iPod  
can be played on this unit with the  
support the docking station. It enables  
you to enjoy the superior sound output  
from the speaker system.  
VIDEO IN  
(A)  
The docking station supports the  
following GoGear/iPod range:  
A Connect the docking station to the  
DOCK jack on this unit.  
iPod  
80GB, 60GB,30GB, Nano,  
40GB, 20GB, 20GB,, Mini  
The (A) connection is only required for  
photo and video playback from iPod.  
Before you begin, turn on your TV to the  
correct video-in channel and make sure  
that the ‘TV ON’ setting of your iPod is  
turned on.  
HDD1840, 1850  
SA9100, 9200  
GoGear  
Preparing the docking station  
The supplied docking station has two  
types of cradles, one for GoGear and  
another for iPod. Different types of dock  
adaptors are provided to support various  
GoGear/iPod range.  
B Dock your GoGear or iPod in the  
correct cradle and turn it on.  
C Press DOCK on the remote control to  
switch this unit to ‘DOCK’ mode.  
D Start playback on your GoGear/iPod.  
The music will be heard through the  
speakers.  
GoGear  
The following buttons on the remote  
control can be used to control the  
GoGear/iPod playback.  
iPod  
Remote Control  
DISC MENU  
PLAY/PAUSE  
PREV/NEXT  
ꢀ ꢁ  
iPod  
GoGear  
A Slide the dock station’s cover to select  
the correct docking cradle.  
The default accessible cradle is for  
iPod.  
OK  
B Select the matching dock adaptor and  
attach it to the cradle.  
Helpful Hints:  
Find the correct type number at the  
bottom of the dock adaptor for your  
GoGear/iPod.  
– The docking station is specially designed  
for use with this unit. Never try it on other  
device.  
– Whenever this unit is powered up and the  
docking station is connected to it, the battery  
of the docked GoGear or iPod will be  
charged automatically.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback - USB Device  
D Select the file to play and press u.  
Playing from USB flash drive  
or USB memory card reader  
For more playback information, see  
‘Playing a MP3/WMA disc,’ ‘Playing a JPEG  
image file (slideshow)’ or ‘Playing a DivX  
disc’ for details.  
You can play or view the data files (JPEG,  
MP3, Windows Media™ Audio or DivX)  
in the USB flash drive or USB memory  
card reader. However, editing or copying  
the data file is not possible.  
During playback, you can press  
DISC/USB to return to the disc mode.  
E Before removing the USB device, press  
Çto stop playback or press DISC/USB  
to switch to disc mode.  
Helpful Hints:  
– The USB jack does not support the  
connection of other USB devices except to a  
USB flash drive / USB memory card reader.  
– When the USB device does not fit into the  
USB jack, a USB extension cable is required.  
– You can only read and playback the  
content from the USB device.  
– Copy-protected contents are not playable.  
A Connect the USB flash drive / USB  
memory card reader directly to the USB  
jack on this unit (as shown in the above  
illustration.)  
B A message appears on the TV for 5 (five)  
seconds when the device is detected.  
Press DISC/USB to select device  
C Press DISC/USB on the remote control  
to access the data in the drive.  
When using multiple drives on a single  
card reader, only one of the connected  
cards can be accessed.  
The device numbers may vary from  
different card readers.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback - Other Audio Player  
Playing from other portable  
audio player  
When you connect your portable audio  
player to this unit to get the best  
immersion sound experience through the  
speaker system. However, controlling of  
playback is only possible on the portable  
audio player.  
MP3 LINE-IN  
A Use a MP3 LINE-IN cable (not supplied) to  
connect between the ‘headphone’ output  
jack on your portable audio player and  
the MP3 LINE-IN jack on this unit.  
B Press MP3 LINE-IN on the remote  
control.  
C Start playback on your portable audio  
player.  
Î The music will be heard through the  
speakers.  
D To stop playback, press the STOP button  
on the portable audio player.  
Helpful Hint:  
– If you change the input source by pressing  
any of the source buttons (e.g. DISC/USB,  
RADIO,) press the STOP button on the  
portable audio player to stop its playback.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup Menu Options  
Accessing the setup menu  
General Setup Page  
Disc Lock  
Display Dim  
Program  
see page 38  
This system setup is carried out via the  
TV, enabling you to customize this unit to  
suit your particular requirements.  
OSD Language  
Screen Saver  
Sleep  
DivX(R) VOD Code  
Audio Setup Page  
Speakers Volume  
Speakers Delay  
HDMI Audio  
see pages  
39~40  
A In disc mode, press SETUP on the  
remote control.  
CD Upsampling  
Audio Sync  
The setup menu appears.  
B Use keys to select one of the setup  
menu options and press OK.  
If you are not able to access the  
{ Preference Page, } press SETUP to  
exit the menu. Then, press STOP Ç  
twice before you press the SETUP  
again.  
Video Setup Page  
TV Type  
TV Display  
Progressive  
Picture Setting  
HDMI Setup  
Closed Caption  
see pages  
41~42  
C Use keys to select a setup option  
and press to access.  
D Select the setting you wish to change and  
press OK to confirm and go back to the  
previously selected item.  
Instructions and explanations of the  
options are provided in the following  
pages.  
If the option in the menu is grayed  
out, that means the setting is not  
available or cannot be changed in the  
current state.  
Preference Page  
Audio  
Subtitle  
Disc Menu  
Parental  
Surround  
PBC  
MP3/JPEG Nav  
Password  
DivX Subtitle  
Default  
see pages  
43~44  
E To exit, press SETUP.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup Menu Options (continued)  
General Setup Page (underlined options are the factory default settings)  
Disc Lock  
Not all discs are rated or coded by the disc maker. You can  
prevent play of specific discs with the disc lock function. Up to 40  
discs can be locked.  
{ Lock }  
– To block the playback of the current disc.  
Subsequent access to a locked disc requires a  
six-digit password. The default password is  
‘136900’ (see ‘Preference Setup Page -  
{ Password }.)  
{ Unlock }  
– All discs can be played.  
Display Dim  
Program  
Select the brightness of this unit’s display panel.  
{ 100% }  
{ 70% }  
{ 40% }  
– Full brightness.  
– Medium brightness.  
– Dimmest display.  
Access the track programming menu. See ‘Programming disc  
tracks’ for details.  
OSD Language  
Screen Saver  
Select the menu language for this unit’s on-screen display.  
The screen saver prevents damage to the TV screen by avoiding  
exposure to a static image for too long.  
{ On }  
– Switch to TV screen saver mode when  
playback has been stopped or paused for  
more than 5 minutes.  
{ Off }  
– Turn off the screen saver function.  
Sleep  
The sleep timer enables the unit to switch to standby mode  
automatically after the selected preset time.  
{ 15/30/45/60 mins } – Select the preset minutes for switching  
the unit to standby mode automatically.  
{ Off }  
– Turn off the sleep mode function.  
DivX(R) VOD Code  
Philips provides you with the DivX® VOD (Video On Demand)  
registration code that allows you to rent or purchase videos from  
videos from DivX® VOD can only be played back on this unit.  
Press to see the registration code and press OK to exit.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup Menu Options (continued)  
Audio Setup Page (underlined options are the factory default settings)  
Speakers Volume  
Access the speaker’s level setup menu. Use keys to adjust  
the volume level for each connected speaker between -6dB to  
+6dB. See ‘Getting Started - Setting the speakers’ channels’  
for details.  
Speakers Delay  
Access the speaker’s distance setup menu. Use keys to set  
the delay times for the center and rear speakers based on the  
listening position and distance. See ‘Getting Started - Setting  
the speakers’ channels’ for details.  
Note: 1 ms increase/decrease of delay time is equivalent to one (1) foot  
change in distance. Use the longer delay time settings when the rear  
speakers are closer to the listener than the front speakers.  
HDMI Audio  
This setting is only required if you are using the HDMI OUT  
jack to connect your TV or other display device (see  
‘Option 4: Connecting to a HDMI-compatible TV’.)  
{ Off }  
– Turn off the HDMI audio output. You  
can still enjoy the sound output through  
the speaker system.  
{ All }  
– The HDMI audio output will be same as  
the audio stream being played back. In  
the case when the playback audio format  
is not supported, the audio output will be  
changed to PCM (Pulse Code Modulation)  
automatically.  
{ PCM only } – Downmix the audio signals to linear-PCM  
(2-channel.)  
Notes:  
It may take a while for this unit and the input device to communicate  
and initialize.  
It is not possible to listen to SACDs or copy-controlled DVD-Audio  
CPPM (Content Protection for Playable Media) sources using the HDMI  
connection.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup Menu Options (continued)  
Audio Setup Page (underlined options are the factory default settings)  
CD Upsampling  
This feature enables you to convert the music CD to a  
higher sampling rate using sophisticated digital signal  
processing for better sound quality.  
{ Off }  
– Turn off CD-upsampling.  
{ 88.2 kHz (X2) } – To convert the sampling rate of the CDs  
twice as high as the original rate.  
Notes:  
– If you have activated the CD upsampling feature, the audio output  
automatically switches to stereo mode.  
If you press the SURROUND button on the remote control to select  
multi-channel mode, it turns off the CD upsampling feature.  
Audio Sync  
This feature allows you to adjust the audio delay times if the video  
playback is slower than the audio output streams.  
Use keys to set the delay times for the audio output  
between 0~200ms.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup Menu Options (continued)  
Video Setup Page (underlined options are the factory default settings)  
TV Type  
Select the color system that matches the connected TV. It  
enables playback of a different type of disc (PAL or NTSC disc)  
on this unit.  
{ NTSC }  
{ Multi }  
– For NTSC-system TV.  
– For TV that is compatible with both PAL and  
NTSC.  
TV Display  
The picture shape can be adjusted to fit your TV.  
{ 4:3 Pan Scan }– For a full-height picture with  
the sides trimmed.  
{ 4:3 Letter Box }For a ‘wide-screen’ display  
with black bars on the top and  
bottom.  
{ 16:9 Wide Screen } – For wide-screen TV  
(frame ratio 16:9.)  
Progressive  
Before enabling the progressive scan feature, you must ensure that  
your TV can accept progressive signals (a progressive scan TV is  
required) and that you have connected this unit to your TV using  
the Y Pb Pr. See ‘Getting Started - Setting up progressive scan  
feature’ for details.  
{ On }  
– Turn on progressive scan mode.  
Read the instructions on the TV and confirm  
your action by pressing OK on the remote  
control.  
{ Off }  
– Turn off the progressive scan mode.  
Picture Setting  
This unit provides three predefined sets of picture color settings  
and one personal setting which you can define yourself.  
{ Standard }  
{ Bright }  
{ Soft }  
– Original color setting.  
– Vibrant color setting.  
– Warm color setting.  
{ Personal }  
– Select this to personalize the picture color  
setting. Use keys to adjust to the setting  
that best suits your personal preference and  
press OK to confirm. For an average setting,  
select { 0. }  
Personal Picture Setup  
Brightness  
Contrast  
Tint  
Color  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup Menu Options (continued)  
Video Setup Page (underlined options are the factory default settings)  
HDMI Setup  
It provides the picture settings to enhance the appearance and  
picture quality for disc playback. This feature is only applicable if  
you have connected this unit to a HDMI-compatible TV/device.  
{ Wide Screen Format } – Select a suitable screen display.  
Note: This feature is only available if you have selected the { 16:9  
Wide Screen } in { TV Display } setup option.  
{ Superwide }  
Display the 4:3 picture disc on the wide-screen TV  
with non-linear stretching (center position of the  
screen is stretched less than the side.)  
{ 4:3 Pillar Box }  
Display the 4:3 picture disc on the wide-screen TV  
without stretching. Black bars will be shown on  
the both sides of the TV screen.  
{ Off }  
No aspect ratio adjustment is made when this  
option is selected.  
Note: The { Superwide } is only applicable for  
resolution: 720p or1080i.  
{ HDMI Video }– Select a suitable video resolution depending  
on the capability of the connected TV/device  
to further enhance the HDMI video output.  
{ 480p }  
Progressive output in 480 lines for NTSC TV.  
{ 576p }  
Progressive output in 576 lines for PAL TV.  
{ 720p } - (if a HDMI TV is connected)  
Progressive output upscale to 720 lines.  
{ 1080i } - (if a HDMI TV is connected)  
Interlaced output upscale to 1080 lines.  
{ Auto }  
The video output will automatically follow the  
display’s supported resolution.  
Note: If no display appears on the TV due to unsupported resolution,  
use the composite video cable to connect this unit and your TV. Turn on  
your TV to the correct input channel for the composite video and adjust  
the resolution setting to 480p/576p.  
This feature is only available if the disc contained of special video  
signal data. It shows sound effects on the screen if your TV  
supports this feature, such as ‘phone ringing’ and ‘footsteps.’  
Closed Caption  
{ On }  
{ Off }  
– Turn on closed caption feature.  
– Turn off closed caption feature.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup Menu Options (continued)  
Preference Setup Page (underlined options are the factory default settings)  
Audio  
Select the preferred audio language for DVDs with multiple  
sound tracks.  
Subtitle  
Select the preferred subtitle language for DVD playback.  
Select the preferred disc menu language for DVD playback.  
Disc Menu  
Note: If the selected audio/subtitle/disc menu language is not available on  
the DVD, the disc’s default language will be used instead.  
Parental  
This is to prohibit viewing of discs that had exceeded the limits  
you set. It works only on the DVDs with parental level assigned  
to the complete disc or to certain scenes on the disc.  
1) Use keys to select a rating level from 1 to 8 and press OK.  
2) Use the numeric keypad 0-9 on the remote control to enter your  
six-digit password.  
Notes:  
– The ratings are country-dependent (‘1’ is considered material that is  
least offensive and ‘8’ is most offensive.) To disable parental controls and  
allow all discs to play, select ‘8’.  
– Some DVDs are not encoded with a rating though the movie rating  
may be printed on the disc cover. The rating level feature does not  
prohibit playback of such discs. VCD, SVCD and CD have no level  
indication, so parental control has no effect on these type of discs.  
– DVDs that are rated higher than the level you selected will not be  
played unless you enter the same six-digit password.  
Surround  
PBC  
Set the preferred surround setting when the unit is powered up.  
{ On }  
– Turn on to multi-channel surround mode.  
{ Last Setting } – Turn on to the last surround setting.  
Play Back Control feature is applicable for VCD/SVCD only. It  
allows you to play Video CDs (2.0) interactively, following the  
menu on the display.  
{ On }  
– The index menu (if available) appears on the  
TV when you load a VCD/SVCD.  
{ Off }  
– The VCD/SVCD skips the index menu and  
playback directly from the beginning.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup Menu Options (continued)  
Preference Setup Page (underlined options are the factory default settings)  
MP3/JPEG Nav  
MP3/JPEG Navigator can only be set if the disc is recorded with a  
menu. It allows you to select different display menus for easy  
navigation.  
{ Without Menu } – Display all the files contained in the MP3/  
Picture disc.  
{ With Menu } – Display the folder menu of the MP3/Picture  
disc.  
Note: This unit can only display 650 files/folder in the directory.  
Password  
The password is used for the Disc Lock and Parental. The default  
password is ‘136900.’ To change the password:  
1) Press OK to access the change password menu.  
Change Password  
Old Password  
New Password  
Confirm PWD  
OK  
2) Use the numeric keypad 0-9 on the remote control to  
enter your existing six-digit password at { Old Password. }  
Note: When doing this for the first time or if you forget your existing  
password, key in ‘136900.’  
3) Enter the new six-digit password at { New Password. }  
4) Enter the new six-digit password again at { Confirm PWD. }  
5) Press OK to confirm and exit the menu.  
DivX Subtitle  
Select the font type that supports the recorded DivX subtitle.  
{ Central Europe } – Display Central Europe fonts.  
{ Cyrillic }  
{ Greek }  
{ Standard }  
– Display Cyrillic fonts.  
– Display Greek subtitle fonts.  
– Display a standard list of Roman subtitle  
fonts provided by this unit.  
{ Hebrew }  
– Display Hebrew subtitle fonts.  
{ Chinese (Simp) } – Display Simplified Chinese fonts.  
{ Korean } – Display Korean fonts.  
Default  
This feature enables you to reset all the setup menu options and  
your personal settings to the factory defaults, except your  
password for the Disc Lock and Parental.  
Press OK to confirm the default reset.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Radio Operations  
Before you start ...  
Make sure the FM and AM/MW antennas  
are connected.  
Presetting radio stations  
You can store up to 40 FM and 20 AM/  
MW preset radio stations in the memory.  
There are three different ways to  
program the radio stations:  
– Using auto install (for ꢀrst time setup  
only)  
Tuning to radio stations  
A Press SOURCE repeatedly until ‘FM’  
appears on the display panel (or press  
RADIO on the remote control.)  
– Using automatic preset  
– Using manual preset  
B Press and hold W / X on the remote  
control to start tuning.  
Helpful Hints:  
– This unit exits presetting mode if no  
button is pressed within 20 seconds.  
– If no stereo signal is detected or less than  
5 (ꢀve) stations are detected during radio  
installation, ‘CHECK FM ANTENNA’ appears.  
ÎThe frequency indication starts to  
change until a radio station with sufꢀcient  
signal strength is found.  
C Repeat step B if necessary until you ꢀnd  
the desired radio station  
Using auto install  
D To ꢀne-tune the reception of a weak  
station, press S / T brieꢁy and  
repeatedly until an optimal reception is  
found.  
When you access the ‘RADIO’ mode for  
the very ꢀrst time, you will be prompted  
to install the radio stations. With this  
feature, you can install all the available  
radio station automatically with one  
touch of button.  
RADIO  
A Press RADIO.  
Î ‘AUTO INSTALL ... PRESS PLAY’  
appears.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Radio Operations (continued)  
B Press u.  
Selecting a preset radio  
station  
This unit starts searching from the FM  
band followed by the AM/MW band.  
All the available radio stations with  
strong signal will be stored automatically.  
Once complete, the first tuned radio  
station will be played back.  
A Press RADIO to select ‘FM’ or ‘AM/  
MW’ band.  
B Use í/ ë keys to select a preset  
radio stations (or use the numeric keypad  
on the remote control.)  
Using automatic preset  
The preset number and radio  
frequency appear on the display panel.  
Use automatic presetting to store or  
reinstall all the preset radio stations.  
Deleting a preset radio  
station  
RADIO  
PROGRAM  
A In radio mode, use í/ ëkeys to select  
a preset radio station.  
B Press and hold Çuntil ‘FM/AM/MW X  
DELETED’ appears.  
A Press RADIO to select ‘FM’ or ‘AM/  
‘X’ is the preset number.  
MW’ band.  
The radio station continues to play  
but has been deleted from the preset list.  
The rest of the preset radio stations  
remain unchanged.  
B Press and hold PROGRAM until  
“START ...” appears on the display panel.  
All previously stored radio stations  
will be replaced.  
Using manual preset  
Use manual presetting to store your  
favorite radio stations.  
A Tune to your desired radio station (see  
‘Tuning to radio stations’.)  
B Press PROGRAM.  
C Use í/ ëkeys to select a preset  
number that you want to store the  
current radio station.  
D Press PROGRAM to store.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound and Volume Controls  
Selecting surround sound  
Press SURROUND to select between  
Multi-Channel or Stereo sound.  
The availability of the various  
surround sound modes depends on the  
sound available on the disc.  
The available output modes for Multi-  
channel include: Dolby Digital, DTS  
(Digital Theater Systems) Surround and  
Dolby Pro Logic II.  
MUTE  
VOL+-  
SURROUND  
SOUND  
Stereo broadcasts or recordings  
produce some surround channel effects  
when played in a surround mode.  
Selecting digital sound effects  
Volume control  
Select a preset digital sound effect that  
matches your disc’s content or that  
optimizes the sound of the musical style  
you are playing.  
Press VOL +/-to increase or  
decrease the volume level.  
‘VOL MIN’ is the minimum volume  
level and ‘VOL MAX’ is the maximum  
volume level.  
Press SOUND to select the available  
sound effect.  
When playing movie discs or in TV mode,  
you can select: CONCERT, DRAMA,  
ACTION, MTV, GAMING, CARTOON,  
SPORTS, NEWS or NIGHT.  
To turn off the volume temporarily  
Press MUTE %.  
Playback continues without sound and  
‘MUTE’ appears.  
To restore the volume, press MUTE  
% again, or increase the volume level.  
When playing music discs or while in  
RADIO, MP3 LINE-IN or AUX/DI mode,  
you can select: CLASSIC, JAZZ, ROCK,  
RNB, PARTY, LOUNGE, SPORTS,  
NEWS or NIGHT.  
Helpful Hint:  
– It is not possible to mute the HDMI audio  
output while in TV mode.  
Helpful Hint:  
– For flat sound output, select CONCERT or  
CLASSIC.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Features  
Installing the latest software  
Periodically Philips will issue software  
upgrades to enhance the user experience.  
A Get the software version of this unit by  
pressing OPEN/CLOSE çto open the  
disc compartment  
B Press DISPLAY on the remote control.  
Write down the information for your  
current software version.  
com/support’ to check the availability of  
the latest software upgrade and download  
the software to a CD-R.  
D Insert the CD-R to the disc tray.  
The software starts to install on this  
unit automatically.  
Note:  
Never unplug or turn off this unit  
during the upgrade.  
E When the disc compartment opens,  
remove the CD-R.  
The software upgrading is in process.  
F Once complete, it turns off to standby  
mode automatically.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
AMPLIFIER  
MAIN UNIT  
Total output power:  
Power Supply Rating: 120 V; 60 Hz  
Power Consumption: 180 W  
Low Standby power: < 1 W  
- Home Theater mode: 1000 W  
- FTC* output power: 510 W  
Frequency Response: 180 Hz – 14 kHz / 3 dB  
Signal-to-Noise Ratio: > 60 dB (A-weighted)  
Input Sensitivity  
Dimensions:  
435 x 55 x 367 (mm)  
(w x h x d)  
4.04 kg  
Weight:  
- AUX In:  
- TV In:  
- MP3 Line-In:  
500 mV  
250 mV  
500 mV  
FRONT AND REAR SPEAKERS  
System:  
Full range satellite  
6 Ω  
Impedance:  
Speaker drivers:  
* (1% THD 1kHz)  
3” full range speaker  
RADIO  
Tuning Range:  
Frequency response: 150 Hz – 20 kHz  
FM 87.5–108 MHz (100kHz)  
AM 530–1700 kHz (10kHz)  
Dimensions:  
95.5 x 198.3 x 75 (mm)  
(w x h x d)  
26 dB Quieting  
Sensitivity:  
IF Rejection Ratio:  
Signal-to-Noise Ratio: FM 50 dB, AM 30 dB  
AM Suppression Ratio: FM 30 dB  
Harmonic Distortion: FM Mono 3%  
FM Stereo 3%  
Weight:  
0.62 kg/each  
FM 22 dBf, AM 5000μV/m  
FM 60 dB, AM 24 dB  
CENTER SPEAKER  
System:  
Impedance:  
Speaker drivers:  
Full range satellite  
3 Ω  
2 x 2.5” full range woofer,  
1 x 2” tweeter  
AM 5%  
Frequency response: 150 Hz – 20 kHz  
Dimensions:  
Frequency Response FM 180 Hz–10 kHz / 6 dB  
Stereo Separation  
Stereo Threshold  
435 x 93.5 x 67 (mm)  
(w x h x d)  
1.26kg  
FM 26 dB (1 kHz)  
FM 23.5 dB  
Weight:  
DISC  
SUBWOOFER  
Impedance:  
Speaker drivers:  
Frequency response: 40 Hz – 150 Hz  
Dimensions:  
Laser Type  
Semiconductor  
12cm / 8cm  
MPEG-1 / MPEG-2 /  
/ DivX 3/4/5/6, Ultra  
12 Bits  
NTSC / Multi  
4:3 / 16:9  
56 dB  
3 Ω  
Disc Diametre  
Video Decoding  
203 mm (8”) woofer  
159.5 x 355.5 x 370 (mm)  
(w x h x d)  
4.78 kg  
Video DAC  
Signal System  
Video Format  
Video S/N  
Weight:  
Composite Video  
Output  
S-Video Output  
1.0 Vp-p, 75Ω  
Specifications subject to change without prior  
notice.  
Y - 1.0 Vp-p, 75Ω  
C - 0.286 Vp-p, 75Ω  
24 Bits / 96 kHz  
Audio DAC  
Frequency Response 4 Hz–20 kHz (44.1 kHz)  
4 Hz–22 kHz (48 kHz)  
4 Hz–44 kHz (96 kHz)  
PCM  
IEC 60958  
Dolby Digital  
DTS  
IEC 60958, IEC 61937  
IEC 60958, IEC 61937  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
WARNING  
Under no circumstances should you try to repair the system yourself, as this will  
invalidate the warranty. Do not open the system as there is a risk of electric shock.  
If a fault occurs, first check the points listed below before taking the system for repair. If  
you are unable to solve a problem by following these instructions, consult your dealer or  
Philips for help.  
Problem (General)  
No power.  
Solution  
– Press STANDBY-ON on the unit to turn on the  
power.  
– Make sure the mains cord is properly connected and  
the AC outlet has power.  
– Refer to your TVs manual for correct Video In  
channel selection. Change the TV channel until you  
see the DVD screen.  
No picture.  
– Press DISC/USB to select disc mode.  
– If this happens when you turn on the progressive scan  
feature or change the HDMI video setting, wait for 15  
seconds for the auto recovery or switch back to the  
default mode as below:  
1) Press OPEN/CLOSE ç.  
2) Press on the remote control.  
3) Press AUDIO on the remote control.  
– Check the video connection.  
– Sometimes a small amount of picture distortion may  
appear. This is not a malfunction.  
Completely distorted picture  
or black/white picture.  
– The disc is dirty. Clean the disc.  
– Adjust the volume.  
No sound or distorted sound.  
– Check the speaker connections and settings.  
– Make sure that the audio cables are connected and  
press SOURCE to select the correct input source (for  
example, TV or AUX/DI) to choose the device that  
you want to hear through this unit.  
– Press SURROUND to select a correct surround  
sound setting.  
No surround sound effect  
from the speakers.  
– Make sure that the source you are playing is recorded  
or broadcast in surround sound (DTS, Dolby Digital,  
etc.).  
– Select the source you want to play (for example,  
DISC/USB or RADIO) before pressing the function  
button (, í/ ë.)  
The remote control does not  
function properly.  
– Reduce the distance between the remote control and  
this unit.  
– Batteries are weak, replace the batteries.  
– Point the remote control directly toward the IR sensor.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting (continued)  
Problem (Playback)  
Solution  
The unit does not start  
playback.  
– Insert a readable disc with the playback side facing  
down. The DVD+R/CD-R must be finalized.  
– Make sure the disc is not scratched or warped.  
– Press SETUP to turn off the system setup menu  
screen.  
– You may need to enter the password in order to  
unlock the disc for playback.  
– Moisture may have condensed inside this unit.  
Remove the disc and leave this unit turned on for  
about an hour.  
The aspect ratio of the screen – The aspect ratio is fixed on the DVD disc.  
cannot be changed even though – Depending on the TV, it may not be possible to  
you have set the TV display.  
change the aspect ratio.  
Cannot activate some features – The features may not be available on the DVD.  
such as Angles, Subtitles, or  
multi-language Audio.  
– Changing the language for the sound or subtitle is  
prohibited on this DVD.  
Not able to select some items – Press STOP button twice before selecting the system  
in the setup/system menu.  
setup menu.  
– Depending on the disc availability, some menu items  
cannot be selected.  
Unable to play DivX movies.  
– Ensure that the DivX file is encoded according to the  
‘Home Theater Profile’ with the DivX encoder.  
– Check that the DivX movie downloaded is a complete  
file.  
Radio reception is poor.  
The unit does not work.  
– If the signal is too weak, adjust the antenna or  
connect an external antenna for better reception.  
– Increase the distance between this unit and your TV  
or VCR.  
– Tune in to the correct frequency.  
– Place the antenna further away from any equipment  
that may be causing the interference.  
– Disconnect the power cord from the power outlet  
for a few minutes. Reconnect the power cord and try  
to operate again as usual.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting (continued)  
Problem (USB/HDMI/DOCK)  
Solution  
The contents of the USB flash – The USB flash drive format is not compatible with this  
drive cannot be read.  
unit.  
– Drive is formatted with a different file system which is  
not supported by this unit (e.g. NTFS.)  
Slow operation of the USB  
flash drive.  
– Large file size or high memory USB flash drive takes  
longer time to read and display on the TV.  
No audio output from HDMI – You will not hear any sound from the HDMI output if  
connection.  
the source device is only DVI/HDCP (High-bandwidth  
Digital Content Protection)-compatible.  
– It is not possible to output SACD or copy-controlled  
DVD-Audio sources from the HDMI connection.  
– Make sure that the audio output setting is not turned  
off. See ‘Setup Menu Options - { Audio Setup Page -  
HDMI Audio }’ for details.  
No video output from HDMI  
connection.  
– HDMI connection can only be made to HDMI-  
equipped devices with HDCP (High Bandwidth Digital  
Content Protection.) If you wish to connect to a DVI  
connector (equipped with HDCP,) you will need a  
separate adaptor (DVI to HDMI.)  
– Make sure the resolution of this unit matches the  
device you have connected using the HDMI. See  
‘Setup Menu Options - { Video Setup Page - HDMI  
Setup - HDMI Video }’ for details.  
No audio from GoGear/iPod  
playback.  
– Make sure the docking station is connected to this  
unit.  
No video from iPod playback. – Make sure you have connected the 3.5mm video cable  
from the docking station to your TV. Turn on your  
TV to the correct video input channel.  
– Turn on the ‘TV ON’ setting of the iPod.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently Asked Questions (USB)  
Why does it take so long to display the  
contents on my USB device?  
Why does the file name appear to be  
different from what was displayed on my  
computer (e.g. from “Good Bye. jpg” to  
“Good_B~1.jpg”)?  
This could be due to the large numbers  
of files (>500 files/folders) or size of the  
files (>1MB.)  
The length of the file name is restricted  
by the file system of the device (FAT16),  
which only supports eight (8) characters.  
The computer may be able to display the  
full file name as the operating system can  
convert the file system.  
There could be other non-supported files  
in the device that this unit is trying to  
read/display.  
What if un-supported devices (e.g. USB  
mouse, keyboards) are plugged into  
this unit?  
The device may cause this unit to be  
unstable. Remove the unsupported device  
and unplug the mains cord. Wait for a few  
minutes before reconnecting the mains cord  
and power on this unit again.  
Is simultaneous USB and Disc playback  
possible?  
This is not possible due to memory  
limitation. In addition, a different user  
interface will be needed in order to function  
and in order to be simple enough to use.  
What happens when I plug in a USB  
HDD?  
Why can’t I rotate the pictures in my  
device?  
HDD is not supported as the large storage  
capacity makes navigation very difficult.  
Transfer the music files (mp3) and photos  
(jpg) into a flash drive.  
In order to rotate the pictures in the USB  
device, the picture must contain EXIF  
information, stored by most digital cameras.  
This EXIF information may have been  
removed when you edit or copy the picture  
from other devices using editing programs.  
Why does this unit fail to detect my  
USB portable music player?  
The portable music player may require  
propriety software that is bundled with our  
system in order to access the contents (eg.  
playlist.)  
Why can’t this unit play some of my  
music files, photos or movies?  
The music files may not be playable because  
of different formats and encoding bit-rates.  
Similarly, the photos may be of low  
resolution or too high resolution for this unit  
to support.  
What types of file does this unit  
support?  
We support only FAT16 and FAT32, not  
NTFS.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
Analog audio: Sound that has not been  
turned into numbers. Analog sound is  
available with you use the AUDIO LEFT/  
RIGHT. These red and white jacks send  
audio through two channels, the left and  
right.  
Dolby Digital: A surround sound system  
developed by Dolby Laboratories containing  
up to six channels of digital audio (front left  
and right, surround left and right, center and  
subwoofer.)  
Dolby Surround Pro Logic II: It is an  
improved matrix decoding technology that  
provides better spatiality and directionality  
on Dolby Surround program material,  
provides a convincing three dimensional  
sound field on conventional stereo music  
recordings and is ideally suited to bring the  
surround experience to automotive sound.  
While conventional surround programming  
is fully compatible with Dolby Surround Pro  
Logic II decoders, soundtracks will be able to  
be encoded specifically to take full advantage  
of Pro Logic II playback, including separate  
left and right surround channels. (Such  
material is also compatible with conventional  
Pro Logic decoders.)  
Aspect ratio: Aspect ratio refers to the  
length to height ratio of TV screens. The  
ratio of a standard TV is 4:3, while the ratio  
of a high-definition or wide TV is 16:9. The  
letter box allows you to enjoy a picture with  
a wider perspective on a standard 4:3 screen.  
AUDIO OUT jacks: Red and white jacks  
on the back of the unit that send audio to  
another system (TV, Stereo, etc.).  
Bit Rate: The amount of data used to hold  
a given length of music; measured in kilobits  
per second, or kbps. Or, the speed at which  
you record. Generally, the higher the bit  
rate, or the higher the recording speed, the  
better the sound quality. However, higher bit  
rates use more space on a disc.  
DTS: Digital Theater Systems. This is a  
surround sound system, but it is different  
from the Dolby Digital. The formats were  
developed by different companies.  
Chapter: Sections of a picture or a music  
piece on a DVD that are smaller than titles.  
A title is composed of several chapters. Each  
chapter is assigned a chapter number  
HDMI: High-Definition Multimedia  
Interface (HDMI) is a high-speed digital  
interface that can transmit uncompressed  
high definition video and digital multichannel  
audio. It delivers perfect picture and sound  
quality, completely free from noise. HDMI is  
fully backward-compatible with DVI.  
As required by the HDMI standard,  
connecting to HDMI or DVI products  
without HDCP (High-bandwidth Digital  
Content Protection) will result in no Video  
or Audio output.  
enabling you to locate the chapter you want.  
Composite video (CVBS): A single video  
signal commonly used in most consumer  
video products.  
Disc menu: A screen display prepared for  
allowing a selection of images, sounds,  
subtitles, multi-angles, etc., recorded on a  
DVD.  
DivX: The DivX code is a patent-pending,  
MPEG-4 based video compression  
technology, developed by DivX Networks,  
Inc., that can shrink digital video to sizes  
small enough to be transported over the  
internet, while maintaining high visual quality.  
HDCP (High-bandwidth Digital Content  
Protection) is a specification that provides a  
secure transmission of digital contents  
between different devices (to prevent  
unauthorized copyright.)  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary (continued)  
JPEG: A very common digital still picture  
format. A still-picture data compression  
system proposed by the Joint Photographic  
Expert Group, which features small decrease  
in image quality in spite of its high  
Surround: A system for creating realistic  
three dimensional sound fields full of realism  
by arranging multiple speakers around the  
listener.  
S-Video: Produces a clear picture by  
sending separate signals for the luminance  
and the color. You can use S-Video only if  
your TV has an S-Video In jack.  
compression ratio. Files are recognized by  
their file extension ‘JPG or JPEG.’  
MP3: A file format with a sound data  
compression system. ‘MP3’ is the  
abbreviation of Motion Picture Experts  
Group 1 (or MPEG-1) Audio Layer3. By  
using the MP3 format, one CD-R or CD-RW  
can contain about 10 times more data than a  
regular CD.  
Title: The longest section of a movie or  
music feature on DVD. Each title is assigned  
a title number, enabling you to locate the  
title you want.  
WMA: Windows Media™ Audio. Refers to  
an audio compression technology developed  
by Microsoft Corporation. WMA data can be  
encoded by using Windows Media Player  
version 9 or Windows Media Player for  
Windows XP. Files are recognized by their  
file extension ‘WMA.’  
MPEG: Motion Picture Experts Group. A  
collection of compression systems for digital  
audio and video.  
Multi-channel: DVDs are formatted to  
have each sound track constitute one sound  
field. Multi-channel refers to a structure of  
sound tracks having three or more channels.  
PBC: Playback Control. A system of  
navigating a Video CD/Super VCD through  
on-screen menus recorded onto the disc.  
You can enjoy interactive playback and  
searching.  
Progressive Scan: The progressive scan  
displays twice the number of frames per  
second than in an ordinary TV system. It  
offers higher picture resolution and quality.  
Region code: A system allowing discs to be  
played only in the region designated. This  
unit will only play discs that have compatible  
region codes. You can find the region code  
of your unit by looking at the product label.  
Some discs are compatible with more than  
one region (or ALL regions.)  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PHILIPS LIMITED WARRANTY  
ONE (1) YEAR  
WARRANTY COVERAGE:  
PHILIPS warranty obligation is limited to the terms set forth  
below.  
Philips, or (d) if any Philips serial number has been removed or  
defaced, or (e) product, accessories or consumables sold “AS IS”  
without warranty of any kind by including refurbished Philips  
product sold “AS IS” by some retailers.  
WHO IS COVERED:  
Philips warrants the product to the original purchaser or the per- This Limited Warranty does not cover:  
son receiving the product as a gift against defects in materials and  
workmanship as based on the date of original purchase  
(“Warranty Period”) from an Authorized Dealer. The original  
sales receipt showing the product name and the purchase date  
from an authorized retailer is considered such proof.  
Shipping charges to return defective product to Philips.  
Labor charges for installation or setup of the product, adjust-  
ment of customer controls on the product, and installation or  
repair of antenna/signal source systems outside of the product.  
Product repair and/or part replacement because of improper  
installation or maintenance, connections to improper voltage  
supply, power line surge, lightning damage, retained images or  
screen markings resulting from viewing fixed stationary con-  
tent for extended periods, product cosmetic appearance items  
due to normal wear and tear, unauthorized repair or other  
cause not within the control of Philips.  
Damage or claims for products not being available for use, or  
for lost data or lost software.  
Damage from mishandled shipments or transit accidents when  
returning product to Philips.  
A product that requires modification or adaptation to enable  
it to operate in any country other than the country for which  
it was designed, manufactured, approved and/or authorized, or  
repair of products damaged by these modifications.  
A product used for commercial or institutional purposes  
(including but not limited to rental purposes).  
WHAT IS COVERED:  
The Philips warranty covers new products if a defect in material  
or workmanship occurs and a valid claim is received by Philips  
within the Warranty Period. At its option, Philips will either (1)  
repair the product at no charge, using new or refurbished  
replacement parts, or (2) exchange the product with a product  
that is new or which has been manufactured from new, or ser-  
viceable used parts and is at least functionally equivalent or most  
comparable to the original product in Philips current inventory,  
or (3) refund the original purchase price of the product.  
Philips warrants replacement products or parts provided under  
this warranty against defects in materials and workmanship from  
the date of the replacement or repair for ninety (90) days or for  
the remaining portion of the original product’s warranty,  
whichever provides longer coverage for you. When a product or  
part is exchanged, any replacement item becomes your property  
and the replaced item becomes Philips’ property. When a refund  
is given, your product becomes Philips’ property.  
Product lost in shipment and no signature verification receipt  
can be provided.  
Failure to operate per Owner’s Manual.  
Note: Any product sold and identified as refurbished or  
renewed carries a ninety (90) day limited warranty.  
TO OBTAIN ASSISTANCE IN THE U.S.A., PUERTO  
RICO, OR U.S. VIRGIN ISLANDS…  
Contact Philips Customer Care Center at:  
1-888-PHILIPS (1-888-744-5477)  
Replacement product can only be sent if all warranty  
requirements are met. Failure to follow all requirements  
can result in delay.  
TO OBTAIN ASSISTANCE IN CANADA…  
1-800-661-6162 (French Speaking)  
1-888-PHILIPS (1-888-744-5477) - (English or Spanish  
Speaking)  
WHAT IS NOT COVERED - EXCLUSIONS AND LIMI-  
TATIONS:  
This Limited Warranty applies only to the new products manu-  
factured by or for Philips that can be identified by the trademark,  
trade name, or logo affixed to it. This Limited Warranty does not REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS  
apply to any non-Philips hardware product or any software, even  
if packaged or sold with the product. Non-Philips manufacturers,  
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-  
SUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN-  
suppliers, or publishers may provide a separate warranty for their TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF  
own products packaged with the bundled product.  
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD-  
UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE  
LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR  
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT  
IS LIMITED IN DURATION TO THE DURATION OF THIS  
WARRANTY.  
Philips is not liable for any damage to or loss of any programs,  
data, or other information stored on any media contained within  
the product, or any non-Philips product or part not covered by  
this warranty. Recovery or reinstallation of programs, data or  
other information is not covered under this Limited Warranty.  
Some states do not allow the exclusions or limitation of inciden-  
tal or consequential damages, or allow limitations on how long an  
implied warranty lasts, so the above limitations or exclusions may  
not apply to you.  
This warranty does not apply (a) to damage caused by accident,  
abuse, misuse, neglect, misapplication, or non-Philips product, (b)  
to damage caused by service performed by anyone other than  
Philips or Philips Authorized Service Location, (c) to a product or  
a part that has been modified without the written permission of  
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.  
Philips, P.O. Box 671539, Marietta, GA. 30006-0026  
3121 233 48802  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Peavey Musical Instrument Amplifier 210 TXR User Manual
Peavey Portable Speaker PV 118 Sub User Manual
Pelco Network Card C2907M D User Manual
Pelco Security Camera C611M C User Manual
Philips Bluetooth Headset SHB7110 User Manual
Philips Digital Camera SPC900NC User Manual
Philips Universal Remote TSU500 User Manual
Planet Technology Network Card WAP 4033 User Manual
Plustek Photo Scanner Plustek SmartOffice Series User Manual
Poulan Lawn Mower 191713 User Manual