Always there to help you
Register your product and get support at
Question?
Contact
Philips
HTB3510
HTB3540
HTB3570
User manual
Download from Www.Somanuals.com. All Manuals Search And Download.
wall mount to a wall that can support the
combined weight of the product and the
wall mount. Koninklijke Philips Electronics
N.V. bears no responsibility for improper
wall mounting that results in accident,
injury or damage.
For speakers with stands, use only the
supplied stands. Secure the stands to the
speakers tightly. Place the assembled stands
on flat, level surfaces that can support the
combined weight of the speaker and stand.
Never place the product or any objects
on power cords or on other electrical
equipment.
1 Important
Read and understand all instructions before you
use your product. If damage is caused by failure
to follow instructions, the warranty does not
apply.
•
Safety
•
•
Risk of electric shock or fire!
•
Never expose the product and accessories
to rain or water. Never place liquid
containers, such as vases, near the product.
If liquids are spilt on or into the product,
disconnect it from the power outlet
immediately. Contact Philips Consumer
Care to have the product checked before
use.
If the product is transported in
temperatures below 5°C, unpack the
product and wait until its temperature
matches room temperature before
connecting it to the power outlet.
Visible and invisible laser radiation when
open.Avoid exposure to beam.
Do not touch the disc optical lens inside
the disc compartment.
Parts of this product can be made of
glass. Handle with care to avoid injury and
damage.
•
•
•
•
Never place the product and accessories
near naked flames or other heat sources,
including direct sunlight.
•
•
Never insert objects into the ventilation
slots or other openings on the product.
Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Risk of overheating!
•
Never install this product in a confined
space.Always leave a space of at least four
inches around the product for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the product.
•
Batteries (battery pack or batteries
installed) shall not be exposed to excessive
heat such as sunshine, fire or the like.
Disconnect the product from the power
outlet before lightning storms.
Risk of contamination!
•
Do not mix batteries (old and new or
carbon and alkaine, etc.).
Danger of explosion if batteries are
incorrectly replaced. Replace only with the
same or equivalent type.
•
•
•
When you disconnect the power cord,
always pull the plug, never the cable.
Risk of short circuit or fire!
•
•
Remove batteries if they are exhausted or
if the remote control is not to be used for
a long time.
Batteries contain chemical substances, they
should be disposed of properly.
•
Before you connect the product to the
power outlet, ensure that the power
voltage matches the value printed on the
back or bottom of the product. Never
connect the product to the power outlet if
the voltage is different.
Risk of swallowing batteries!
•
The product/remote control may contain
a coin/button type battery, which can be
swallowed. Keep the battery out of reach
Risk of injury or damage to the home theater!
•
For wall-mountable products, use only the
supplied wall mount bracket. Secure the
2
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
of children at all times! If swallowed, the
battery can cause serious injury or death.
Severe internal burns can occur within two
hours of ingestion.
Care of the environment
•
•
If you suspect that a battery has been
swallowed or placed inside any part of the
body, seek immediate medical attention.
When you change the batteries, always
keep all new and used batteries out of
reach of children. Ensure that the battery
compartment is completely secure after
you replace the battery.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
•
If the battery compartment cannot be
completely secured, discontinue use of the
product. Keep out of reach of children and
contact the manufacturer.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC. Please inform yourself about the local
separate collection system for electrical and
electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for the
environment and human health.
This is CLASS II apparatus with double
insulation, and no protective earth provided.
Care for your product
•
•
•
Do not insert any objects other than discs
into the disc compartment.
Do not insert warped or cracked discs into
the disc compartment.
Remove discs from the disc compartment
if you are not using the product for an
extended period of time.
Use only microfiber cloth to clean the
product.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot
be disposed with normal household waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environmental and
human health.
•
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
3D health warning
If you or your family has a history of epilepsy
or photosensitive seizures, consult a medical
professional before exposing yourself to flashing
light sources, rapid image sequences or 3D
viewing.
To avoid discomfort such as dizziness, headache
or disorientation, we recommend not watching
3D for extended periods of time. If you
experience any discomfort, stop watching
3D and do not immediately engage in any
potentially hazardous activity (for example
driving a car) until your symptoms have
disappeared. If symptoms persist, do not resume
watching 3D without consulting a medical
professional first.
Parents should monitor their children during
3D viewing and ensure they do not experience
any discomfort as mentioned above.Watching
3D is not recommended for children under six
years of age as their visual system is not fully
developed yet.
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Your home
theater
a
b
c
n
o
d
e
Congratulations on your purchase, and
welcome to Philips!To fully benefit from the
support that Philips offers(e.g. notification
of product software upgrade), register your
f
g
p
q
h
i
Main unit
r
s
This section includes an overview of the main
unit.
j
k
a b c def
l
m
t
u
a
b
c
(Open/Close)
Open or close the disc compartment.
(Play/Pause)
Start, pause or resume play.
a
b
(Standby-On)
Switch the home theater on or to
standby.
When EasyLink is enabled, press
and hold for at least three seconds
to switch all connected HDMI CEC
compliant devices to standby.
•
•
(Stop)
Stop play.
d SOURCE
Select an audio or video source for the
home theater.
(Home)
Access the home menu.
e
f
+/- (Volume)
Increase or decrease volume.
c Source buttons
(Standby-On)
Switch the home theater on or to standby.
•
DISC/POP-UP MENU : Switch to disc
source.Access or exit the disc menu
when you play a disc.
•
•
RADIO : Switch to FM radio.
SOURCE : Select an audio input
source.
Remote control
This section includes an overview of the
remote control.
d BACK
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Return to a previous menu screen.
In radio mode, press and hold to erase
the current preset radio stations.
q
r
s
(Pause)
Pause play.
(Mute)
Mute or restore volume.
e Navigation buttons
•
•
Navigate menus.
In radio mode, press left or right to
start auto search.
Access or exit sound options.
•
In radio mode, press up or down to
tune the radio frequency.
t SUBTITLE
Select subtitle language for video.
f OK
u Color buttons
Confirm an entry or selection.
Select tasks or options for Blu-ray discs.
g
/
(Previous/Next)
•
•
Skip to the previous or next track,
chapter or file.
In radio mode, select a preset radio
station.
Connectors
This section includes an overview of the
connectors available on your home theater.
h
(Stop) / (Open/Close)
Stop play.
Press and hold for three seconds to
open or close the disc.
•
•
Front connectors
i
j
/
(Fast Backward / Fast Forward)
Search backwards or forward. Press
repeatedly to change the search speed.
ab
+/- (Volume)
Increase or decrease volume.
a AUDIO IN
Audio input from an MP3 player (3.5mm
jack).
k SMARTTV
Access online SmartTV service.
b
(USB)
l Alphanumeric buttons
Enter values or letters (using SMS style
entry).
•
•
•
Audio, video or picture input from a
USB storage device.
Connect to a Wi-Fi dongle (Model:
Philips WUB1110, sold separately).
Connect a USB mass storage to access
BD-Live.
m AUDIO
Select an audio language or channel.
n TOP MENU
Access the main menu of a disc.
Rear connectors
o OPTIONS
•
Access more play options while playing
a disc or a USB storage device.
f
•
In radio mode, set a radio station.
p
(Play)
Start or resume play.
g hij
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
a AC MAINS
Fixed AC power cable.
b SPEAKERS
Connect to the supplied speakers and
subwoofer.
c DIGITAL IN-COAXIAL
Connect to a coaxial audio output on the
TV or a digital device.
d AUDIO IN-AUX
Connect to an analog audio output on the
TV or an analog device.
e USB(VOD)
Slot for a USB storage device.The USB
storage device is used to rent online
videos.
f FM ANTENNA
Connect to the supplied FM antenna.
g VIDEO OUT
Connect to the composite video input on
theTV.
h DIGITAL IN-OPTICAL
Connect to an optical audio output on the
TV or a digital device.
i HDMI OUT (ARC)
Connect to the HDMI input on theTV.
j LAN
Connect to the LAN input on a
broadband modem or router.
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Connect and set
up
SUB
FRONT
LEFT
FRONT
RIGHT
FRONT
WOOFER
CENTER
This section helps you connect your home
theater to aTV and other devices, and then set
it up.
For information about the basic connections
of your home theater and accessories, see the
quick start guide.
REAR
LEFT
REAR
RIGHT
Note
• For identification and supply ratings, see the type plate
at the back or bottom of the product.
• Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.
*The actual speaker shapes may vary from the
illustration above.
Note
• Surround sound depends on factors such as room
shape and size, type of wall and ceiling, windows and
reflective surfaces, and speaker acoustics. Experiment
with the speaker positions to find the optimum setting
for you.
Connect speakers
The speaker cables are color-coded for easy
connection.To connect a speaker to your home
theater, match the color on the speaker cable to
the color on the connector.
Follow these general guidelines for speakers
placement.
1 Seating position:
Speaker position plays a critical role in setting
up a surround sound effect. For best effect,
position all the speakers towards the seating
position and place them close to your ear level
(seated).
This is the center of your listening area.
2 FRONT CENTER (front center) speaker:
Place the center speaker directly in front of
the seating position, either above or below
yourTV.
3 FRONT LEFT (front left) and FRONT
RIGHT (front right) speakers:
Place the left and right speakers in the
front, and at equal distance from the center
speaker. Make sure that the left, right, and
the center speakers are at equal distance
from your seating position.
4 REAR LEFT (rear left) and REAR RIGHT
(rear right) speakers:
Place the rear surround speakers to the
left and right side of your seating position,
either in line with it or slightly behind it.
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
5 SUBWOOFER (subwoofer):
up EasyLink (HDMI-CEC control)' on
Place the subwoofer at least one meter
to the left or right of theTV. Leave about
10-centimeter clearance from the wall.
manually. (see 'Set up the audio' on page
12)
Connect toTV
Connect your home theater to aTV to watch
videos.You can listen to theTV audio through
your home theater speakers.
Use the best quality connection available on
your home theater andTV.
Option 2: Connect toTV through
standard HDMI
Best quality video
If yourTV is not HDMI ARC compliant, connect
your home theater to theTV through a
standard HDMI connection.
Option 1: Connect toTV through
HDMI (ARC)
Best quality video
Your home theater supports HDMI version
with Audio Return Channel (ARC). If yourTV
is HDMI ARC compliant, you can hear theTV
audio through your home theater by using a
single HDMI cable.
TV
1 Using a High Speed HDMI cable, connect
the HDMI OUT (ARC) connector on your
home theater to the HDMI connector on
theTV.
TV
'Connect audio fromTV and other devices'
1 Using a High Speed HDMI cable, connect
the HDMI OUT (ARC) connector on
your home theater to the HDMI ARC
connector on theTV.
3 On yourTV, turn on HDMI-CEC
operations. For details, see theTV user
manual.
•
The HDMI ARC connector on theTV
might be labeled differently. For details,
see theTV user manual.
•
up EasyLink (HDMI-CEC control)' on
2 On yourTV, turn on HDMI-CEC
operations. For details, see theTV user
manual.
•
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
manually. (see 'Set up the audio' on page
12)
Connect audio fromTV and
other devices
Play audio fromTV or other devices through
your home theater speakers.
Use the best quality connection available on
yourTV, home theater, and other devices.
Note
• If yourTV has a DVI connector, you can use an HDMI/
DVI adapter to connect toTV. However, some of the
features may not be available.
Note
Option 3: Connect to theTV through
composite video
Basic quality video
If yourTV does not have HDMI connectors, use
a composite video connection.A composite
connection does not support high-definition
video.
Option 1: Connect audio through a
digital optical cable
Best quality audio
TV
TV
1 Using a composite video cable, connect
the VIDEO OUT connector on your
home theater to the VIDEO IN connector
on theTV.
1 Using an optical cable, connect the
OPTICAL connector on your home
theater to the OPTICAL OUT connector
on theTV or other device.
•
The composite video connector might
be labeled AV IN, COMPOSITE, or
BASEBAND.
•
The digital optical connector might be
labeled SPDIF or SPDIF OUT.
'Connect audio fromTV and other devices'
Option 2: Connect audio through a
digital coaxial cable
3 When you watchTV programs, press
SOURCE on your home theater
repeatedly to select the correct audio
input.
Best quality audio
4 When you watch videos, switch yourTV to
the correct video input. For details, see the
TV user manual.
10 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Select [Setup], and then press OK.
3 Select [Audio] > [Speaker Setup].
4 Enter the distance for each speaker, and
then listen to the test tones and change
the volume. Experiment with the speaker
positions to find the ideal setting.
Set up EasyLink (HDMI-CEC
control)
1 Using a coaxial cable, connect the
COAXIAL connector on your home
theater to the COAXIAL/DIGITAL OUT
connector on theTV or other device.
This home theater supports Philips EasyLink,
which uses the HDMI-CEC (Consumer
Electronics Control) protocol. EasyLink-
compliant devices that are connected through
HDMI can be controlled by a single remote
control.
•
The digital coaxial connector might be
labeled DIGITAL AUDIO OUT.
Option 3: Connect audio through
analog audio cables
Note
Basic quality audio
1 Using an analog cable, connect the AUX
connectors on your home theater to the
AUDIO OUT connectors on theTV or
other device.
• Depending on the manufacturer, HDMI-CEC is known
by many names. For information on your device, see
the user manual of the device.
• Philips does not guarantee 100% interoperability with
all HDMI-CEC devices.
VCR
Before you start
•
Connect your home theater to the HDMI-
CEC compliant device through HDMI
connection.
•
Make the necessary connections described
in the quick start guide, and then switch
theTV to the correct source for your
home theater.
Enable EasyLink
Set up speakers
1 Press (Home).
Set up the speakers manually to experience
customized surround sound.
2 Select [Setup], and then press OK.
3 Select [EasyLink] > [EasyLink] > [On] .
Before you start
4 On yourTV and other connected devices,
turn on HDMI-CEC control. For details, see
the user manual of theTV or other devices.
Make the necessary connections described in
the quick start guide, and then switch theTV to
the correct source for your home theater.
1 Press (Home).
EN 11
Download from Www.Somanuals.com. All Manuals Search And Download.
•
On yourTV, set the audio output to
'Amplifier' (instead ofTV speakers).
For details, see theTV user manual.
•
•
on yourTV, set the audio output to
"Amplifier" (instead ofTV speakers). For
details, see theTV user manual, and
setup the EasyLink audio control.
1 Press (Home).
EasyLink controls
2 Select [Setup], and then press OK.
With EasyLink, you can control your home
theater,TV, and other connected HDMI-CEC
compliant devices with a single remote control.
3 Select [EasyLink] > [System Audio
Control] > [On].
•
To play the audio from theTV
speakers, select [Off], and skip the
following steps.
•
•
[OneTouch Play] (One-touch play):When
a video disc is in the disc compartment,
press (Play) to wake up theTV from
standby, and then play a disc.
[OneTouch Standby] (One-touch
standby): If one-touch standby is enabled,
your home theater can switch to standby
with the remote control of theTV or other
HDMI-CEC devices.
4 Select [EasyLink] > [Audio Input
Mapping].
5 Follow the onscreen instructions to map
the connected device to the audio inputs
on your home theater.
•
If you connect your home theater
to theTV through an HDMI ARC
connection, make sure that theTV
audio is mapped to the ARC input on
your home theater.
•
•
[System Audio Control] (System audio
control): If system audio control is enabled,
the audio of the connected device is
output through your home theater
speakers automatically when you play the
device.
[Audio Input Mapping] (Audio input
mapping):If system audio control does not
home theater. (see 'Set up the audio' on
Connect and set up a home
network
Connect your home theater to a network
router for a network setup, and enjoy:
•
•
•
•
•
Streamed multimedia content (see 'Browse
Smartphone control (see 'Smartphone
21)
BD Live applications (see 'BD-Live on Blu-
Software update (see 'Update software
Note
• To change the EasyLink control settings, press
(Home), select [Setup] > [EasyLink].
Set up the audio
If you cannot hear the audio output of a
connected device through your home theater
speakers, do the following:
Caution
•
on all the devices, (see 'Set up EasyLink
• Familiarize yourself with the network router, media
server software and networking principles. If necessary,
read documentation that accompanies the network
components. Philips is not responsible for lost, damaged,
or corrupt data.
12 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
•
To view the network settings, select
[Setup] > [Network] > [View
network settings].
•
For SmartTV and software updates, make
sure that the network router has access to
the Internet with high-speed connection
and is not restricted by firewalls or other
security systems.
Set up the wireless network
•
Make the necessary connections described
in the quick start guide, and then switch
theTV to the correct source for your
home theater.
What you need
•
A network router (with DHCP enabled).
For best wireless performance, coverage,
and compatibility, use 802.11n router;
Connect a Wi-Fi dongle (Model: Philips
WUB1110, sold separately) to the
connector on your home theater.
Set up the wired network
•
What you need
•
•
A network cable (RJ45 straight cable).
A network router (with DHCP enabled).
1 Press (Home).
2 Select [Setup], and then press OK.
LAN
3 Select [Network] > [Network
installation] > [Wireless (Wi-Fi)], and
then press OK.
4 Follow the onscreen instructions to select
and set up the wireless network.
•
If connection fails, select [Retry], and
then press OK.
5 Select [Finish], and then press OK to exit.
•
To view the network settings, select
[Setup] > [Network] > [View
wireless settings].
www
Personalize the network name
1 Using a network cable, connect the LAN
connector on your home theater to the
network router.
Name your home theater to easily identify it on
your home network.
1 Press (Home).
2 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Setup], and then press OK.
3 Select [Network] > [Name your
4 Select [Network] > [Network
Product:].
installation] > [Wired (Ethernet)].
4 Press the Alphanumeric buttons to enter
5 Follow the onscreen instructions to
the name.
complete the setup.
5 Select [Done], and then press OK to exit.
•
If connection fails, select [Retry], and
then press OK.
6 Select [Finish], and then press OK to exit.
EN 13
Download from Www.Somanuals.com. All Manuals Search And Download.
you’ve made at home, such as CD-R discs of
photos, videos, and music.
4 Use your home
theater
1 Insert a disc into the home theater.
2 If the disc does not play automatically, press
DISC or select [play Disc] from the home
menu.
This section helps you use the home theater to
play media from a wide range of sources.
Before you start
•
It is normal to hear a little noise when
you play a Blu-ray disc.This does not
mean that your home theater is faulty.
•
Make the necessary connections described
in the quick start guide and the user
manual.
•
Complete the first-time setup. First-time
setup appears when you turn on your
home theater for the first time or if you do
not complete the setup.
Switch theTV to the correct source for
your home theater (for example, HDMI,
AV IN).
Play buttons
Button
Action
•
Navigation Navigate menus.
buttons
Up/Down: Rotate the picture
clockwise or counter-clockwise.
Confirm an entry or selection.
Start or resume play.
OK
(Play)
Access the home menu
Pause play.
/
Stop play.
The home menu provides easy access to
connected devices, setup and other useful
features in your home theater.
Press and hold for three seconds
to open or close the disc
compartment.
Skip to the previous or next track,
chapter or file.
Search fast backwards or forward.
When a video is paused, search
slow backwards or forward.
1 Press (Home).
/
/
» The home menu is displayed.
2 Press the Navigation buttons and OK to
select the following:
•
•
[play Disc]: Start disc play.
[browse USB]:Access the USB
content browser.
SUBTITLE Select subtitle language for video.
DISC/
Access or exit the disc menu.
•
•
[SmartTV]:Access SmartTV.
[browse PC]:Access the computer
content browser.
POP-UP
MENU
OPTIONS when you play your audio, video,
or media files (see 'Audio, video,
•
[Setup]:Access menus to change video,
audio and other settings.
3 Press (Home) to exit.
Synchronize picture and sound
Discs
If the audio and video are not synchronized,
delay the audio to match the video.
Your home theater can play DVDs,VCDs, CDs,
and Blu-ray discs. It can also play discs that
14 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Press
.
1 Enable BonusView in the Blu-ray disc
menu.
2 Select AUD SYNC, and then press OK.
2 While you play the movie, press
3 Press the Navigation buttons (up/down)
OPTIONS.
to synchronize the audio with the video.
» The options menu is displayed.
4 Press OK to confirm.
3 Select [PIP selection] > [PIP].
•
Depending on the video, PIP menu [1]
or [2] is displayed.
Play Blu-ray 3D disc
Your home theater can play Blu-ray 3D video.
Read the 3D health warning before playing a
3D disc.
•
To disable BonusView, select [Off].
4 Select [2nd audio language] or [2nd
Subtitle Language].
What you need
5 Select the language, and then press OK.
•
•
A 3DTV
A pair of 3D glasses that are compatible
with your 3DTV
BD-Live on Blu-ray
•
•
A 3D Blu-ray video
A high speed HDMI cable
Access additional features on the Blu-ray discs
with BD-Live content, such as internet chats
with the director, the latest movie trailers,
games, wallpaper, and ringtones.
BD-Live services and content vary from disc to
disc.
1 Using the high speed HDMI cable, connect
your home theater to a 3D compatibleTV.
2 Make sure that the 3D video setting is
enabled. Press (Home), select [Setup] >
[Video] > [Watch 3D video] > [Auto].
What you need
•
•
Blu-ray disc with BD-Live content
a USB storage device, with at least 1 GB of
memory
•
To play 3D discs in 2D mode, select
[Off].
3 Play a Blu-ray 3D disc and put on the 3D
glasses.
'Connect and set up a home network' on
•
During video search and in certain play
modes, the video is displayed in 2D.
The video display returns to 3D when
you resume play.
2 Connect a USB storage device to the
(USB) connector at the front of your
home theater for BD-Live download.
Note
3 Press (Home) and select [Setup] >
• To avoid flickering, change the brightness of the display.
[Advanced] > [BD-Live security] > [Off].
•
To disable BD-Live, select [On].
4 Select the BD-Live icon in the disc menu,
BonusView on Blu-ray
and then press OK.
» BD-Live starts to load.The loading
time depends on the disc and your
internet connection.
On Blu-ray discs that support the BonusView,
enjoy extra content such as commentaries in a
small screen window. BonusView is also known
as picture-in-picture.
5 Press the Navigation buttons to navigate
BD-Live, and then press OK to select an
option.
EN 15
Download from Www.Somanuals.com. All Manuals Search And Download.
2 For DivX or RMVB/RM videos, if the
subtitles do not appear correctly, continue
the following steps to change the character
set.
Note
• To clear the memory on the storage device, press
(Home), select [Setup] > [Advanced] > [Clear
memory].
3 Press OPTIONS.
» The options menu is displayed.
4 Select [Character set], and then select a
character set that supports the subtitle.
Europe, India, LATAM, and Russia
Data files
Your home theater can play pictures, audio and
video files contained in a disc or a USB storage
Character
Set
Language
[Standard]
English,Albanian, Danish,
Dutch, Finnish, French, Gaelic,
German, Italian, Kurdish (Latin),
Norwegian, Portuguese, Spanish,
Swedish andTurkish
1 Play the files from a disc or USB storage
device.
2 To stop play, press
.
[Central
Europe]
Albanian, Croat, Czech, Dutch,
English, German, Hungarian, Irish,
Polish, Romanian, Slovak, Slovene
and Sorbian
Bulgarian, Belorussian, English,
Macedonian, Moldavian, Russian,
Serbian and Ukrainian
•
To resume the video from where you
stopped, press (Play).
•
To play the video from the start, press
OK.
[Cyrillic]
Note
[Greek]
[Baltic]
Greek
• To play DivX DRM protected files, connect your home
theater to aTV through an HDMI cable.
Estonian, Latvian and Lithuanian
VOD code for DivX
Subtitles
Before you purchase DivX videos and play
them on your home theater, register the home
code.
If your video has subtitles in multiple languages,
select a subtitle language.
1 Press (Home).
Note
2 Select [Setup], and then press OK.
• Make sure that the subtitle file has the exact same
name as the video file. For example, if the video file is
named 'movie.avi', name the subtitle file as 'movie.srt'
or 'movie.sub'.
• Your home theater supports the following file formats:
.srt, .sub, .txt, .ssa, .ass, smi, and .sami. If the subtitles do
not appear correctly, change the character set.
3 Select [Advanced] > [DivX® VOD Code].
» The DivXVOD registration code for
your home theater is displayed.
1 While playing video, press SUBTITLE to
select a language.
16 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Repeat all the tracks on the disc or the
folder.
Turn off the repeat mode.
USB storage devices
Enjoy pictures, audio, and video stored on a
USB storage device such as an MP4 player or
digital camera.
Video options
While watching video, select options such
as subtitles, audio language, time search, and
picture settings. Depending on the video source,
some options are not available.
What you need
•
A USB storage device that is formatted for
FAT or NTFS file systems, and complies
with the Mass Storage Class.
1 Press OPTIONS.
•
» The video options menu is displayed.
2 Press the Navigation buttons and OK to
select and change:
Note
•
•
•
•
•
•
[Audio language]: Select audio
language for video.
[Subtitle Language]: Select subtitle
language for video.
[Subtitle shift]: Change the subtitle
position on the screen.
[Info]: Display information about what
is playing.
[Character set]: Select a character set
that supports the DivX subtitle.
[Time search]: Skip to a specific part
of the video by entering the time of
the scene.
[2nd audio language]: Select the
second audio language for Blu-ray
video.
• If you use a USB extension cable, USB HUB, or USB
multi-reader, the USB storage device may not be
recognized.
1 Connect a USB storage device to the
(USB) connector on your home theater.
2 Press (Home).
3 Select [browse USB], and then press OK.
» A content browser is displayed.
4 Select a file, and then press OK.
•
•
[2nd Subtitle Language]: Select the
second subtitle language for Blu-ray
video.
Audio, video, and picture
options
•
•
•
[Titles]: Select a specific title.
[Chapters]: Select a specific chapter.
[Angle list]: Select a different camera
angle.
Use advanced features when you play pictures,
audio and video files from a disc or a USB
storage device.
•
•
[Menus]: Display the disc menu.
[PIP selection]: Display Picture-in-
Picture window when playing a Blu-ray
disc that supports the BonusView.
[Zoom]: Zoom into a video scene or
picture. Press the Navigation buttons
(left/right) to select a zoom factor.
[Repeat]: Repeat a chapter or title.
Audio options
While playing audio, repeat an audio track, a
disc, or a folder.
•
•
1 Press OPTIONS repeatedly to cycle
through the following functions:
•
Repeat the current track or file.
EN 17
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
[Repeat A-B]: Mark two points within a
chapter or track to repeat play, or turn
off the repeat mode.
[Picture settings]: Select a predefined
color setting.
Note
supported by your home theater (see 'File formats' on
Picture options
While viewing a picture, zoom into the picture,
rotate it, add animation to a slideshow, and
change the picture settings.
Radio
Listen to FM radio on your home theater, and
store up to 40 radio stations.
1 Press OPTIONS.
» The picture options menu appears.
Note
2 Press the Navigation buttons and OK to
select and change the following settings:
• AM and digital radio are not supported.
• If no stereo signal is detected, you are prompted to
install the radio stations again.
•
•
•
[Rotate +90]: Rotate the picture 90
degree clockwise.
[Rotate -90]: Rotate the picture 90
degree counter-clockwise.
[Zoom]: Zoom into a video scene or
picture. Press the Navigation buttons
(left/right) to select a zoom factor.
[Info]: Display picture information.
[Duration per slide]: Select the display
speed for each picture in a slide show.
[Slide animation]: Select animation for
the slide show.
1 Connect the FM antenna to the FM
ANTENNA on your home theater.
•
For the best reception, place the
antenna away from yourTV or other
sources of radiation.
•
•
2 Press RADIO repeatedly until RADIO
appears on the display panel.
•
•
•
» If you have already installed the radio
stations, the last channel that you
listened to is played.
[Picture settings]: Select a predefined
color setting.
[Repeat]: Repeat a selected folder.
» If you have not installed any radio
stations, the message AUTO
INSTALL...PRESS PLAY appears on
the display panel. Press (Play).
Musical slideshow
If the picture and audio files are from the same
disc or USB storage device, you can create a
musical slideshow.
3 Use the remote control to listen or to
change radio stations.
1 Select an audio track, and then press OK.
2 Press BACK, and go to the picture folder.
3 Select a picture, and then press (Play) to
start the slideshow.
4 Press to stop slideshow.
5 Press again to stop music.
18 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Play buttons
Button
MP3 player
Action
Connect a MP3 player to play audio files.
/
Select a preset radio station.
or
What you need
Alphanumeric
buttons
Navigation
buttons
•
•
An MP3 player.
A 3.5mm stereo audio cable.
Left/Right: Search for a radio
station.
Up/Down: Fine tune a radio
frequency.
Press to stop the installation of
radio stations.
Press and hold to erase the
preset radio station.
1 Using the 3.5mm stereo audio cable,
connect the MP3 player to the AUDIO-IN
connector on your home theater.
•
If you use 6.5mm stereo audio cable,
connect the MP3 player to your
home theater using a 3.5mm - 6.5mm
converter jack.
BACK
OPTIONS Manual:
1) Press
2 Press SOURCE repeatedly until AUDIO-
OPTIONS. 2)
IN appears on the display panel.
Press
/
to select your
3 Press the buttons on the MP3 player to
preset. 3) Press
OPTIONS
select and play audio files.
again to store the radio
station.
Automatic: Press and hold for
three seconds to reinstall the
radio stations.
Smartphone control
SUBTITLE
Toggle between the stereo
and mono sounds.
Use your mobile device such as iPhone (iOS
3.1.3 and above),Android phone (2.1 and
above), iPad, or tablet to:
•
•
•
Control your home theater
Browse a data disc or USB storage device
Stream and share content from the devices
on your home network
Tuning grid
In some countries, you can toggle the FM tuning
grid between 50 kHz and 100 kHz.When you
switch the tuning grid, all preset radio stations
are erased.
Before you start
•
Connect your home theater, mobile device,
and other DLNA-compatible devices to
the same home network.
1 Press RADIO on the remote control to
switch to radio mode.
2 Press
.
•
For better video quality, use wired
connection whenever possible.
3 Press and hold (Play) to toggle between
50 kHz or 100 kHz.
•
•
home theater (see 'Personalize the
Download Philips MyRemote application
on your mobile device.
•
For iPhone or iPad, search for the app
in App Store (App Store).
EN 19
Download from Www.Somanuals.com. All Manuals Search And Download.
•
For Android based phone or tablet,
search for the app in Market (Market).
Stream multimedia content
(SimplyShare)
Philips SimplyShare allows you to use your
smartphone to stream multimedia content
(such as pictures, audio and video files), and play
through your home theater or any DLNA-
compatible device in the same home network.
Before you start
Control your home theater
1 On the mobile device, access MyRemote
application.
2 Select your home theater (by its network
name) from the home screen.
•
Install a DLNA-compliant media server
application on your mobile device, such as
Twonky Media Server.
» A browsing bar is displayed at the
bottom of the screen.
•
If your home theater is not found,
check the network connection or tap
the Devices tab on your mobile device
to search again.
•
Enable media sharing of files. For details,
check the user manual of the media server
software software.
1 On the mobile device, launch the media
server application. For iPhone or Android
phone, access MyRemote application.
3 Select one of the following tabs to access
more options.
•
To return to the previous screen, press
back button.
2 From the menu of your mobile device,
select SimplyShare.
» Your home theater and other
devices on the home network are
automatically detected and displayed
on the screen.
Option
Action
App
Home
Media
Return to the home screen of your
device.
DISC: Browse and play a file stored
on a data disc.
USB: Browse and play a file stored
on a USB storage device.
3 Select a device on the network.
» The folders in the selected device are
displayed. Depending on the media
server, the folder names may vary.
Remote Access the remote control on your
mobile device. Swipe the screen
•
If you cannot see the folders, make
sure that you enable media sharing on
the selected device so that the content
is available for sharing.
to the left or right to access more
buttons. Only the relevant buttons
are enabled on your mobile device.
Some functions such as switch-on
from standby and long press, are not
available on the mobile device.
4 Select a media file to play.
5 From the menu on your mobile device,
select the home theater to stream the
media file to your home theater.
4 Follow the onscreen instructions to select
•
Some media files may not display
or play due to compatibility issues.
For your home theater, check the
supported file formats.
an option or complete the set up.
6 Use your mobile device to control play.
20 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Clear browsing history
Browse SmartTV
Clear the browsing history to remove
passwords, cookies, and browsing data from
your home theater.
Use SmartTV to access variety of internet
applications and specially adapted internet
websites.
For interactive discussions on SmartTV services,
philips.com
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Network] > [Clear SmartTV
memory].
4 Press OK to confirm.
Note
• Koninklijke Philips Electronics N.V. bears no
responsibility for content provided by SmartTV service
providers.
Rent online video
The function is only available in SmartTV
service that has theVOD feature.
Rent videos from online stores, through your
home theater.You can watch them right away
or later.
Many online video stores offer a huge choice of
video, with different rental prices, periods, and
conditions. For some stores, you must create an
account before you can rent.
(see 'Connect and set up a home network'
2 Press (Home).
3 Select [SmartTV], and then press OK.
4 Follow the onscreen instructions to
What you need
confirm the onscreen message.
•
a USB storage device, with at least 8 GB of
memory
» The SmartTV home page is displayed.
web URL, passwords, etc) (see 'Navigate
(see 'Connect and set up a home network'
2 Insert a blank USB storage device into the
USB(VOD) connector at the back of your
home theater, and follow the onscreen
instructions to format the USB device.
Navigate SmartTV
Button
Action
Navigation
buttons
OK
Select an application or
navigate.
Confirm an entry or
selection.
•
After formatting, leave the USB storage
device in the USB(VOD) connector.
After formatting, the USB storage
device will no longer be compatible
with computers or cameras, unless
formatted again using Linux operating
system.
•
BACK
Return to the previous page.
Delete a character in any text
entry box.
Alphanumeric
buttons
(Home)
Enter characters in the text
entry box.
Exit SmartTV portal and
return to home menu.
3 Press (Home).
4 Select [SmartTV], and then press OK.
» The online services available in your
country are displayed.
EN 21
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Select a video store, and then press OK.
Note
6 Follow the onscreen instructions to rent
or watch a video. If prompted, enter the
necessary information to register or log in
to the store's account.
• For additional help on these applications or other
media servers, check the user manual of the media
server software software.
» The video is downloaded to your USB
storage device.You can watch it only
on your home theater.
Set up media server software
To enable media sharing, set up the media
server software.
•
Before you start
•
•
•
Connect your home theater to a home
network. For better video quality, use wired
connection whenever possible.
Connect the computer and other DLNA-
compatible devices to the same home
network.
Make sure that your PC firewall allows
you to run Media Player programs (or
the firewall’s exemption list has the media
server software included).
Browse PC through DLNA
Access and play the pictures, audio and video
files from a computer or media server on the
home network through your home theater.
•
Switch on your computer and the router.
Before you start
MicrosoftWindows Media Player 11
•
Install a DLNA-compliant media server
application on your device. Make sure that
you download an application that works
best for you. For example,
1 Start Windows Media Player on your PC.
2 Click the Library tab, and then select
Media Sharing.
•
Windows Media Player 11 or higher
for PC
3 The first time you select Media Sharing on
your PC,a pop-up screen appears. Check
the Share my media box and click OK.
» The Media Sharing screen is displayed.
•
Twonky Media Server for Mac or PC
•
Enable media sharing of files. For ease of
use, we have included the steps for the
following applications:
4 In the Media Sharing screen, make sure
that you see a device marked as Unknown
Device.
•
•
•
'Microsoft Windows Media Player 11'
'Microsoft Windows Media Player 12'
OS XTwonky Media (v4.4.2)' on page
23)
» If you don't see an unknown device
after a minute or so, check that
your PC firewall is not blocking the
connection.
5 Select the unknown device and click Allow.
» A green tick appears next to the
device.
6 By default,Windows Media Player shares
from these folders: My Music, My Pictures,
22 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
and MyVideos. If your files are in other
folders, select Library > Add to Library.
» The Add to Library screen is displayed.
Macintosh OS XTwonky Media (v4.4.2)
the software, or download a free 30-day
trial to your Macintosh.
•
If necessary, select Advanced options
to display a list of monitored folders.
2 StartTwonky Media on the Macintosh.
7 Select My folders and those of others I
3 In theTwonky Media Server screen, select
can access, and then click Add.
Basic Setup and First Steps.
8 Follow the onscreen instructions to add
the other folders that contain your media
files.
» The First steps screen is displayed.
4 Type a name for your media server, and
then click Save changes.
MicrosoftWindows Media Player 12
5 Back in theTwonky Media screen, select
1 Start Windows Media Player on your PC.
Basic Setup and Sharing.
2 In Windows Media Player, click the Stream
tab, and then select Turn on media
streaming.
» The Sharing screen is displayed.
6 Browse and select folders to share, and
then select Save Changes.
» The Media streaming options screen
is displayed.
» Your Macintosh rescans the folders
automatically so that they are ready to
share.
3 Click Turn on media streaming.
» You return to Windows Media Player
screen.
Play files from your PC
4 Click the Stream tab and select More
streaming options.
Note
» The Media streaming options screen
is displayed.
• Before you play multimedia content from the computer,
make sure that the home theater is connected to
the home network, and the media server software is
properly set up.
5 Make sure that you see a media program
in the Local network screen.
» If you don't see a media program,
check that your PC firewall is not
blocking the connection.
1 Press (Home).
2 Select [browse PC], and then press OK.
6 Select the media program and click
Allowed.
» A content browser is displayed.
3 Select a device on the network.
» The folders in the selected device are
displayed. Depending on the media
server, the folder names may vary.
» A green arrow appears next to the
media program.
7 By default,Windows Media Player shares
from these folders: My Music, My Pictures,
and MyVideos. If your files are in other
folders, click the Organize tab and select
Manage libraries > Music.
•
If you cannot see the folders, check
that you have enabled media sharing
on the selected device so that the
content is available for sharing.
» The Music Library Locations screen is
displayed.
4 Select a file, and then press OK.
•
Some media files may not play due
to compatibility issues. Check the file
8 Follow the onscreen instructions to add
the other folders that contain your media
files.
EN 23
Download from Www.Somanuals.com. All Manuals Search And Download.
formats supported by your home
theater.
Sound mode
Select predefined sound modes to suit your
video or music.
enabled at the speakers (see 'Speaker
Choose sound
2 Press
.
This section helps you choose the ideal sound
for your video or music.
3 Select SOUND, and then press OK.
4 Press the Navigation buttons (up/down)
1 Press
.
to select a setting on the display:
•
AUTO:Automatically select a sound
setting based on the sound stream.
BALANCED: Experience the original
sound of your movies and music,
without added sound effects.
2 Press the Navigation buttons (left/right) to
access the sound options on the display.
•
Sound options Description
SURROUND
Select surround sound or
stereo sound.
•
POWERFUL: Enjoy thrilling arcade
sounds, ideal for action-packed videos
and loud parties.
SOUND
AUD SYNC
Select a sound mode.
Delay the audio to match the
video.
•
•
•
•
BRIGHT: Spice up your dull movies
and music with added sound effects.
CLEAR: Hear every detail in your
music and clear voices in your movies.
WARM: Experience spoken words and
music vocals in comfort.
AUTOVOL
Reduce sudden changes in
volume, for example, during
TV commercials.
3 Select an option, and then press OK.
PERSONAL: Personalize the sound
based on your preferences.
4 Press BACK to exit.
•
If you do not press a button within a
minute, the menu exits automatically.
5 Press OK to confirm.
Equalizer
Surround sound mode
Change the high frequency (treble), mid
frequency (mid), and low frequency (bass)
settings of the home theater.
Experience an immersive audio experience with
surround sound modes.
1 Press
.
1 Press
.
2 Select SURROUND, and then press OK.
2 Select SOUND > PERSONAL, and then
3 Press the Navigation buttons (up/down)
press Navigation buttons (right).
to select a setting from your display:
3 Press the Navigation buttons (up/down)
•
•
•
AUTO: Surround sound based on the
audio stream.
MULTI-CH:Traditional 5.1 channel for
a more relaxing cinematic experience.
STEREO:Two-channel stereo sound.
Ideal for listening to music.
to change bass, mid or treble frequency.
4 Press OK to confirm.
4 Press OK to confirm.
24 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto volume
Turn on auto volume to reduce sudden changes
in volume, for example, duringTV commercials.
1 Press
.
2 Select AUTOVOL, and then press OK.
3 Press the Navigation buttons (up/down)
to select ON or OFF.
4 Press OK to confirm.
EN 25
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Change settings
Picture and video settings
1 Press (Home).
The home theater settings are already
2 Select [Setup], and then press OK.
3 Select [Video], and then press OK.
configured for optimal performance. Unless
you have a reason to change a setting, we
recommend that you keep the default setting.
4 Press the Navigation buttons and OK to
select and change:
•
[Tv type]: If the video does not appear
correctly, select aTV type (color
system).
[TV display]: Select a picture format to
fit theTV screen.
[HDMI video]: Select the resolution of
video signal that is output from HDMI
OUT (ARC) on your home theater.
To enjoy the selected resolution,
make sure that yourTV supports the
selected resolution.
[HDMI Deep Color]: Recreate the
natural world on yourTV screen by
displaying vivid images using billion
colors.Your home theater must be
connected to a Deep Color enabled
TV through an HDMI cable.
Note
• You cannot change a setting that is grayed out.
• To return to the previous menu, press
BACK. To
•
•
exit the menu, press
(Home).
Language settings
1 Press (Home).
•
2 Select [Setup], and then press OK.
3 Select [Preference], and then press OK.
4 Press the Navigation buttons and OK to
select and change:
•
•
•
•
[Menu language]: Select a display
language for menu.
[Audio]: Select an audio language for
discs.
[Subtitle]: Select a subtitle language
for discs.
[Disc menu]: Select a menu language
for discs.
•
•
[Picture settings]: Select pre defined
color settings for the video display.
[Watch 3D video]: Set HDMI video to
support 3D or 2D video.
Note
• If you change a setting, make sure that theTV supports
the new setting.
Note
• If your preferred disc language is not available, select
• If you select a language that is not available on a disc,
the home theater uses the default language of the disc.
Audio settings
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Audio], and then press OK.
4 Press the Navigation buttons and OK to
select and change:
26 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
[Night mode]: For quiet listening,
decrease the volume of loud sounds
on your home theater. Night mode
is only available in DVDs and Blu-ray
discs with Dolby Digital, Dolby Digital
Plus, and DolbyTrue HD soundtracks.
[HDMI Audio]: Set the HDMI audio
output from yourTV, or disable HDMI
audio output from theTV.
[Speaker Setup]: Set up speakers for
best surround sound experience.
[Default sound settings]: Restore
the equalizer settings of all the sound
modes to the default values.
•
•
[Display panel]: Set the brightness of
the home theater front panel display.
[VCD PBC]: Enable or disable the
content menu navigation ofVCD and
SVCD discs with Play Back Control
feature.
Energy saving settings
•
•
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Preference], and then press OK.
4 Press the Navigation buttons and OK to
select and change:
Parental control settings
•
[Screen saver]: Switch the home
theater to screen saver mode after 10
minutes of inactivity.
1 Press (Home).
•
[Auto standby]: Switch the home
theater to standby after 30 minutes of
inactivity.This timer works only when a
disc or USB play is paused or stopped.
[Sleep timer]: Set the duration of the
sleep timer so that the home theater is
switched to standby after the specified
period.
2 Select [Setup], and then press OK.
3 Select [Preference], and then press OK.
4 Press the Navigation buttons and OK to
select and change:
•
•
[Change Password]: Set or change
your password for parental control
access. If you do not have a password
or have forgotten your password, enter
0000.
•
[Parental control]: Restrict access
to discs that are recorded with age
ratings.To play all discs, irrespective of
the ratings, select 8 or [Off].
Speaker settings
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Advanced], and then press OK.
Display settings
4 Press the Navigation buttons and OK to
select and change:
•
[Enhanced audio]: Select [On] to
enable audio post processing at the
speaker and enable karaoke settings
(if your product supports Karaoke).
To play the original audio of the disc,
select [Off].
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Preference], and then press OK.
4 Press the Navigation buttons and OK to
select and change:
•
[Auto subtitle shift]: Enable or disable
automatic repositioning of subtitles on
TVs that support this feature.
EN 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
predefined sound mode (see 'Sound mode' on page
24).
Restore default settings
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Advanced] > [Restore default
settings], and then press OK.
4 Select [OK], and then press OK to
confirm.
» Your home theater is reset to its
default settings except for some
settings such as parental control and
DivXVOD registration code.
28 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1: Download the latest software
6 Update software
1 Connect a USB flash drive to your
computer.
Philips continually tries to improve its products.
To get the best features and support, update
your home theater with the latest software.
com/support.
3 At the Philips Support website, find your
product and locate the Software and
drivers.
Compare the version of your current software
support. If the current version is lower than the
latest version available on the Philips support
website, upgrade your home theater with the
latest software.
» The software update is available as a
zip file.
4 Save the zip file in the root directory of
your USB flash drive.
5 Use the archive utility to extract the
software update file in the root directory.
» The files are extracted under the
UPG_ALL folder of your USB flash
drive.
Caution
• Do not install a lower version of software than the
current version installed on your product. Philips is not
liable for problems caused due to software downgrade.
6 Disconnect the USB flash drive from your
computer.
Check software version
Step 2: Update the software
Check the version of the current software
installed on your home theater.
Caution
• Do not switch off the home theater or remove the
1 Press (Home).
USB flash drive during the update.
2 Select [Setup], and then press OK.
3 Select [Advanced] > [Version
1 Connect the USB flash drive containing the
information].
downloaded file to your home theater.
» The software version is displayed.
•
Make sure that the disc compartment
is closed and no disc inside.
2 Press (Home).
Update software through
USB
3 Select [Setup], and then press OK.
4 Select [Advanced] > [Software update]
> [USB].
What you need
5 Follow the onscreen instructions to
•
A USB flash drive that is FAT or NTFS-
formatted, with at least 256MB of memory.
Do not use a USB hard drive.
A computer with Internet access.
An archive utility that supports the ZIP file
format.
confirm the update.
» Update process takes about 5 minutes
to complete.
•
•
EN 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Update software through the
Internet
(see 'Connect and set up a home network'
2 Press (Home).
3 Select [Setup], and then press OK.
4 Select [Advanced] > [Software update] >
[Network].
» If an upgrade media is detected, you
are prompted to start or cancel the
update.
» Downloading of the upgrading file may
take long, depending on your home
network condition.
5 Follow the onscreen instructions to
confirm the update.
» Update process takes about 5 minutes
to complete.
» Once complete, the home theater
automatically switches off and restarts.
If it does not, disconnect the power
cord for a few seconds and then
reconnect it.
30 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
File formats
7 Product
specifications
•
•
•
Audio:
•
.aac, .mka, .mp3, .wma, .wav, .mp4, .m4a,
.flac, .ogg
•
.ra (Available only in Asia Pacific and
China)
Video:
Note
•
.avi, .divx, .mp4, .m4v, .mkv, .asf, .wmv,
• Specifications and design are subject to change without
notice.
.m2ts, .mpg, .mpeg, .flv, .3gp
.rmvb, .rm, .rv (Available only in Asia
Pacific and China)
•
Picture: .jpg, .jpeg, .jpe, .gif, .png
Region codes
Audio formats
The type plate on the back or bottom of the
home theater shows which regions it supports.
Your home theater supports the following
audio files.
Country
Europe,
DVD
BD
(. ra files are supported only in Asia Pacific and
China)
United Kingdom
Extension
.mp3
Container Audio Bit rate
codec
Asia Pacific, Taiwan,
Korea
A
MP3
MP3
Upto 320
kbps
Latin America
A
.wma
ASF
WMA Upto 192
kbps
Australia,
New Zealand
.aac
AAC
AAC, Upto 192
HE-
kbps
AAC
PCM
Russia, India
.wav
WAV
27.648
Mbps
192 kbps
27.648
Mbps
C
C
China
.m4a
.mka
MKV
MKA
AAC
PCM
Dolby 640 kbps
Digital
Media formats
DTS
core
1.54 Mbps
•
AVCHD, BD, BD-R/ BD-RE, BD-Video,
DVD-Video, DVD+R/+RW, DVD-R/-RW,
DVD+R/-R DL, CD-R/CD-RW,Audio CD,
Video CD/SVCD, Picture files, MP3 media,
WMA media, DivX Plus HD media, USB
storage device
MPEG 912 kbps
MP3
Upto 320
kbps
WMA Upto 192
kbps
EN 31
Download from Www.Somanuals.com. All Manuals Search And Download.
.divx files in AVI container
AAC, Upto 192
HE-
AAC
AAC, Upto 192
HE-
kbps
Audio codec
Video codec
DivX 3.11,
DivX 4.x, DivX 5.x, Mbps
Bit rate
PCM, Dolby
Digital, MP3,
WMA
10
.ra
RM
kbps
DivX 6.x
max
AAC
Cook 96469 bps
FLAC Upto 24
bps
Vorbis Variable
bit rate,
.mp4 or .m4v files in MP4 container
.flac
FLAC
OGG
Audio codec
Video codec
Bit rate
Dolby Digital,
MPEG, MP3,
AAC, HE-AAC,
DD+
MPEG 1,
MPEG 2
40 Mbps
.ogg
maximum
block size
MPEG 4 ASP
38.4
4096
Mbps
25 Mbps
MP3
Upto 320
kbps
H.264/AVC
.mkv files in MKV container
Video formats
Audio codec
Video codec
Bit rate
If you have a high definitionTV, your home
theater allows you to play your video files with:
PCM, Dolby
Digital, DTS core,
MPEG, MP3,
WMA,AAC, HE-
AAC, DD+
DivX Plus HD 30 Mbps
•
•
Resolution: 1920 x 1080 pixels at
Frame rate: 6 ~ 30 frames per second.
.avi files in AVI container
Audio
codec
Video codec
Bit rate
MPEG 1, MPEG 40 Mbps
2
PCM,
DivX 3.11, DivX 4.x,
DivX 5.x, DivX 6.x
10 Mbps
max
MPEG 4 ASP
38.4
Mbps
25 Mbps
Dolby
Digital,
DTS core,
MP3,
H.264/AVC
WMV9
45 Mbps
WMA
MPEG 1, MPEG 2
MPEG 4 SP / ASP
40 Mbps
38.4
Mbps
.m2ts files in MKV container
Audio codec
Video codec
Bit rate
PCM, Dolby Digital, MPEG 1,
40 Mbps
H.264/AVC upto
WMV9
25 Mbps
DTS core, MPEG,
MP3,WMA,AAC,
HE-AAC, DD+
MPEG 2
45 Mbps
MPEG 4 ASP 38.4
Mbps
H.264/AVC
WMV9
25 Mbps
45 Mbps
32 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
.asf and .wmv files in ASF container
•
Input sensitivity:
•
•
AUX: 2V
AUDIO IN: 1V
Audio codec
Video codec
MPEG 4 ASP
Bit rate
Dolby Digital,
MP3,WMA,
DD+
38.4 Mbps
Video
•
•
Signal system: PAL / NTSC
HDMI output: 480i/576i, 480p/576p, 720p,
1080i, 1080p, 1080p24
H.264/AVC
WMV9
25 Mbps
45 Mbps
.mpg and .mpeg files in PS container
Audio
Audio codec
Video codec
Bit rate
•
•
•
S/PDIF Digital audio input:
PCM, DTS core,
MPEG, MP3
MPEG 1,
MPEG 2
40
Mbps
•
•
Coaxial: IEC 60958-3
Optical:TOSLINK
Sampling frequency:
.flv files in FLV container
•
•
MP3: 32 kHz, 44.1 kHz, 48 kHz
WMA: 44.1 kHz, 48 kHz
Audio
codec
Video codec
Bit rate
Constant bit rate:
•
•
MP3: 32 kbps - 320 kbps
WMA: 48 kbps - 192 kbps
MP3,
AAC
H.264/AVC upto
25 Mbps
H.263
38.4 Mbps
Radio
.3gp files in 3GP container
•
Tuning range:
•
Europe/Russia/China: FM 87.5-108
MHz (50 kHz)
Audio
codec
Video codec
Bit rate
•
Asia Pacific/Latin America: FM 87.5-108
MHz (50/100 kHz)
AAC, HE- MPEG 4 ASP
AAC
38.4 Mbps
•
•
Signal-to-noise ratio: FM 50 dB
Frequency response: FM 180 Hz-12.5 kHz
/ ±3 dB
H.264/AVC upto
25 Mbps
max
.rm, .rv, and .rmvb files in RM container
(Available only in Asia Pacific and China)
USB
Audio codec
AAC, COOK
Video codec
RV30, RV40
Bit rate
•
•
Compatibility: Hi-Speed USB (2.0)
Class support: USB Mass Storage Class
(MSC)
40 Mbps
•
•
File system: FAT16, FAT32, NTFS
USB port: 5V , 500mA (for each port)
Amplifier
•
•
•
Total output power: 1000W RMS (30%
THD)
Frequency response: 20 Hz-20 kHz /
±3 dB
Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
Main unit
•
Power supply:
•
•
Europe/China: 220-240V~, 50 Hz
Latin America/Asia Pacific: 110-127
V/220-240V~, 50-60 Hz
EN 33
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Russia/India: 220-240V~, 50 Hz
•
Cable length (rear): 10.25 m
•
•
•
Power consumption: 160 W
Standby power consumption: ≤ 0.5 W
Dimensions (WxHxD): 435 x 58 x 280
mm
Remote control batteries
•
2 x AAA-R03-1.5V
•
Weight: 2.66 kg
Laser
Subwoofer
•
LaserType (Diode): InGaN/AIGaN (BD),
AIGaInP (DVD/CD)
•
•
•
•
Output power: 166 W RMS (30%THD)
Impedance: 4 ohm
Speaker drivers: 165 mm (6.5") woofer
Dimensions (WxHxD): 178 x 300 x 343
mm
•
Wave length: 405 +7 nm/-7 nm (BD),
655 +10 nm/-10 nm (DVD),
790 +10 nm/-20 nm (CD)
Output power (Max. ratings): 20 mW
(BD), 6 mW (DVD), 7 mW (CD)
•
•
•
Weight: 3.66 kg
Cable length: 3.3 m
Speakers
Center speaker:
•
•
•
•
Output power: 166 W RMS (30%THD)
Speaker impedance: 4 ohm
Speaker drivers: 1 x 78 mm (3") full range
Dimensions (WxHxD): 223 x 100 x 80
mm
•
•
Weight: 0.65 kg
Cable length: 2.25 m
Front/Rear speaker:
•
Output power: 4 x 166 W RMS (30%
THD)
•
•
•
Speaker impedance: 4 ohm
Speaker drivers: 1 x 78 mm (3") full range
Dimensions (WxHxD):
•
•
•
HTB3510: 90 x 185 x 82 mm (front/
rear)
HTB3540: 90 x 185 x 82 mm (front);
247 x 1090 x 242 mm (rear)
HTB3570: 247 x 1090 x 242 mm
(front/rear)
•
Weight (front):
•
•
•
HTB3510: 0.53 kg/each
HTB3540: 0.53 kg/each
HTB3570: 2.66 kg/each
•
•
Weight (rear):
•
•
HTB3510: 0.56 kg/each
HTB3540/HTB3570: 2.72 kg/each
Cable length (front): 3.25 m
34 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
8 Troubleshooting
Disc does not play high-definition video.
•
•
•
Make sure that the disc contains high-
definition video.
Make sure that theTV supports high-
definition video.
Warning
• Risk of electric shock. Never remove the casing of the
product.
Use an HDMI cable to connect to theTV.
To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, get support at
Sound
No sound from home theater speakers.
•
Connect the audio cable from your home
theater to yourTV or other devices.
However, you do not need a separate
audio connection when the home theater
andTV are connected through an HDMI
ARC connection.
Main unit
The buttons on the home theater do not
work.
•
•
Reset your home theater to its factory
settings, and then switch it off and switch
on again.
•
Disconnect the home theater from the
power supply for a few minutes, then
reconnect.
•
Make sure that the touch buttons surface
is not in contact with any conductive
material, like water drop, metal, etc.
•
On your home theater, press SOURCE
repeatedly to select the correct audio
input.
Distorted sound or echo.
Picture
•
If you play audio from theTV through the
home theater, make sure that theTV is
muted.
No picture.
•
Make sure that theTV is switched to the
correct source for the home theater.
Audio and video are not synchronized.
•
1) Press . 2) Press the Navigation
buttons (left/right) to select AUD
SYNC, and then press OK. 3) Press
the Navigation buttons (up/down) to
synchronize the audio with the video.
No picture on aTV connected through HDMI.
•
Make sure that you use a High Speed
HDMI cable to connect the home theater
andTV. Some Standard HDMI cables do
not display properly for some images, 3D
video, or Deep Color.
•
•
Make sure that the HDMI cable is not
faulty. If it is faulty, replace it with a new
cable.
Press (Home) and then 731 on the
remote control to restore the default
picture resolution.
Play
Cannot play a disc.
Clean the disc.
•
EN 35
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
the type of disc (see 'Media formats' on
the region code of the disc (see 'Region
•
This behavior is normal when you are using
Philips EasyLink (HDMI-CEC).To make the
home theater work independently, switch
off EasyLink.
Cannot access BD-Live features.
•
connected to the network (see 'Connect
'Connect and set up a home network' on
Make sure that the Blu-ray disc supports
BD-Live features.
Clear memory storage (see 'BD-Live on
If the disc is a DVD±RW or DVD±R disc,
make sure that it is finalized.
Cannot play a DivX file.
•
•
Make sure that the DivX file is encoded
according to the 'HomeTheater Profile'
with the DivX encoder.
•
•
•
Make sure that the DivX file is complete.
DivX or RMVB/RM subtitles do not display
correctly.
•
Select the correct character set: 1) Press
OPTIONS. 2) Select [Character set]. 3)
Select the supported character set. 4)
Press OK.
My 3D video played in 2D mode.
•
Make sure that your home theater is
connected to a 3DTV through an HDMI
cable.
•
•
Cannot read the contents of a USB storage
device.
TV screen is black when you play a Blu-ray 3D
video or a DivX copy protected video.
•
Make sure that the format of the USB
storage device is compatible with the
home theater.
•
Make sure that the home theater is
connected to theTV through an HDMI
cable.
•
Make sure that the file system on the USB
storage device is supported by the home
theater.
•
Switch to the correct HDMI source on
theTV.
Cannot download video from an online video
store.
•
'No entry' or 'x' sign appears on theTV.
The operation is not possible.
•
Make sure that your home theater is
connected to theTV through an HDMI
cable.
Make sure that the USB storage device
is formatted, has enough memory to
download the video.
Make sure that you have paid for the video,
and it is within the rental period.
is good (see 'Connect and set up a home
EasyLink does not work.
•
'Set up EasyLink (HDMI-CEC control)' on
ForTVs from different manufacturers, the
HDMI CEC could be called differently.
Check theTV user manual on how to
enable it.
•
•
•
•
•
Visit the video store website for more
information.
When you switch on theTV, the home theater
automatically switches on.
36 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
9 Notice
Open source software
Open source software
This section contains the legal and trademark
notices.
Philips Electronics Hong Kong Ltd. hereby offers
to deliver, upon request, a copy of the complete
corresponding source code for the copyrighted
open source software packages used in this
product for which such offer is requested by
the respective licenses.
Copyright
This offer is valid up to three years after
product purchase to anyone in receipt of this
information.To obtain source code, please
contact [email protected]. If you prefer
not to use email or if you do not receive
confirmation receipt within a week after mailing
to this email address, please write to "Open
SourceTeam, Philips Intellectual Property &
Standards, P.O. Box 220, 5600 AE Eindhoven,
The Netherlands." If you do not receive timely
confirmation of your letter, please email to the
email address above.
This item incorporates copy protection
technology that is protected by U.S. patents
and other intellectual property rights of
Rovi Corporation. Reverse engineering and
disassembly are prohibited.
This product incorporates proprietary
technology under license fromVerance
Corporation and is protected by U.S. Patent
7,369,677 and other U.S. and worldwide
patents issued and pending as well as copyright
and trade secret protection for certain aspects
of such technology. Cinavia is a trademark of
Verance Corporation. Copyright 2004-2010
Verance Corporation.All rights reserved by
Verance. Reverse engineering or disassembly is
prohibited.
Compliance
Cinavia notice
This product complies with the radio
interference requirements of the European
Community.
This product uses Cinavia technology to
limit the use of unauthorized copies of some
commercially-produced film and videos and
their soundtracks.When a prohibited use of an
unauthorized copy is detected, a message will
be displayed and playback or copying will be
interrupted.
Trademarks
More information about Cinavia technology
is provided at the Cinavia Online Consumer
To request additional information about Cinavia
by mail, send a postcard with your mailing
address to: Cinavia Consumer Information
Center, P.O. Box 86851, San Diego, CA, 92138,
USA.
"Blu-ray 3D " and "Blu-ray 3D " logo are
trademarks of Blu-ray Disc Association.
EN 37
Download from Www.Somanuals.com. All Manuals Search And Download.
divx.com for more information and software
tools to convert your files into DivX videos.
ABOUT DIVXVIDEO-ON-DEMAND:This
DivX Certified device must be registered
in order to play purchased DivXVideo-on-
Demand (VOD) movies.To obtain your
registration code, locate the DivXVOD section
in your device setup menu. Go to vod.divx.com
for more information on how to complete your
registration.
'DVDVideo' is a trademark of DVD Format/
Logo Licensing Corporation.
DivX Certified to play DivX and DivX Plus
HD (H.264/MKV) video up to 1080p HD
including premium content.
Java and all other Java trademarks and logos are
trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and/or
other countries.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
Manufactured under license under U.S. Patent
Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535;
7,392,195; 7,272,567; 7,333,929; 7,212,872
& other U.S. and worldwide patents issued
& pending. DTS-HD, the Symbol, & DTS-
HD and the Symbol together are registered
trademarks & DTS-HD Master Audio | Essential
is a trademark of DTS, Inc. Product includes
software. DTS, Inc.All Rights Reserved.
CLASS 1
LASER PRODUCT
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
DivX , DivX Certified , DivX Plus HD
and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used
under license.
ABOUT DIVXVIDEO: DivX is a digital video
format created by DivX, LLC, a subsidiary
of Rovi Corporation.This is an official DivX
Certified device that plays DivX video.Visit
38 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
10 Language code
Abkhazian
Afar
Afrikaans
Amharic
6566
6565
6570
6577
6582
7289
6583
6569
6589
6590
7783
6665
6669
6678
6672
6673
7866
6683
6682
6671
7789
6983
6765
6772
6769
Inupiaq
Irish
Íslenska
Italiano
Ivrit
Japanese
Javanese
Kalaallisut
Kannada
Kashmiri
Kazakh
Kernewek
Khmer
7375
7165
7383
7384
7269
7465
7486
7576
7578
7583
7575
7587
7577
8287
7589
7586
7579
Pushto
8083
8285
8185
8277
8279
8278
8377
8371
8365
8367
8382
8378
8381
8368
8373
8373
8376
8379
8384
7882
8385
7073
8387
8383
8386
8476
8489
8471
8465
8484
8469
8472
6679
8473
8479
8483
8478
8482
8475
8487
8571
8575
8582
8590
8673
8679
8765
6789
8779
8872
8973
8979
9085
Russian
Quechua
Raeto-Romance
Romanian
Rundi
Samoan
Sango
Sanskrit
Sardinian
Serbian
Shona
Arabic
Armenian
Assamese
Avestan
Aymara
Azerhaijani
Bahasa Melayu
Bashkir
Belarusian
Bengali
Bihari
Bislama
Bokmål, Norwegian
Bosanski
Brezhoneg
Bulgarian
Burmese
Castellano, Español
Catalán
Chamorro
Chechen
Chewa; Chichewa; Nyanja7889
Ё᭛
Chuang; Zhuang
Church Slavic; Slavonic 6785
Chuvash
Corsican
Česky
Shqip
Sindhi
Kinyarwanda
Kirghiz
Komi
Sinhalese
Slovensky
Slovenian
Somali
Sotho; Southern
South Ndebele
Sundanese
Suomi
Swahili
Swati
Svenska
Tagalog
Tahitian
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga (Tonga Islands)
Tsonga
Tswana
Türkçe
Turkmen
Twi
Uighur
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Walloon
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Korean
Kuanyama; Kwanyama 7574
Kurdish
Lao
Latina
Latvian
Letzeburgesch;
Limburgan; Limburger 7673
Lingala
Lithuanian
Luxembourgish;
Macedonian
Malagasy
Magyar
Malayalam
Maltese
Manx
Maori
Marathi
Marshallese
Moldavian
Mongolian
Nauru
Navaho; Navajo
Ndebele, North
Ndebele, South
Ndonga
Nederlands
Nepali
Norsk
Northern Sami
North Ndebele
Norwegian Nynorsk;
Occitan; Provencal
Old Bulgarian; Old Slavonic 6785
Oriya
Oromo
Ossetian; Ossetic
Pali
Panjabi
Persian
Polski
Português
7585
7679
7665
7686
7666
7678
7684
7666
7775
7771
7285
7776
7784
7186
7773
7782
7772
7779
7778
7865
7886
7868
7882
7871
7876
7869
7879
8369
7868
7878
7967
9072
9065
6786
6779
6783
6865
6869
6890
6978
6979
6984
6985
6976
7079
7082
7089
7074
Dansk
Deutsch
Dzongkha
English
Esperanto
Estonian
Euskara
ꢀꢁꢁꢂꢃꢄꢅꢆ
Faroese
Français
Frysk
Fijian
Gaelic; Scottish Gaelic 7168
Gallegan
Georgian
Gikuyu; Kikuyu
Guarani
Gujarati
Hausa
Herero
Hindi
Hiri Motu
Hrwatski
Ido
7176
7565
7573
7178
7185
7265
7290
7273
7279
6779
7379
7982
7977
7983
8073
8065
7065
8076
8084
Interlingua (International)7365
Interlingue
Inuktitut
7365
7385
EN 39
Download from Www.Somanuals.com. All Manuals Search And Download.
connectors
11 Index
control buttons (disc)
control buttons (radio)
control buttons (USB)
2
2nd audio language
2nd subtitle language
D
data files
deep color
default settings
device name
disc language
disc menu
display panel
disposal
3
3D disc in 2D mode
3D safety
3D video
5
DivX
5.1 speakers
E
A
Easylink (HDMI-CEC)
eject disc
advanced settings
amplifier
enhanced audio
environment
audio connection (analog cable)
audio connection (HDMI ARC)
audio formats
audio from other devices
audio language
audio options
audio post processing
audio settings
F
factory settings
file formats
H
auto standby
auto subtitle shift
auto volume
HDMI ARC
HDMI audio
HDMI-CEC
home menu
home network
B
batteries
BD-Live
Blu-ray
I
internet
BonusView
brightness
L
language code
C
change password
character set
clear BD-Live memory
connect toTV
M
main unit
manual setup
40 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
media formats
media sharing
menu language
musical slideshows
speaker specifications
subtitle language
subtitle position
surround sound
synchronize picture and sound
N
network
night mode
T
troubleshooting (picture)
troubleshooting (play)
troubleshooting (sound)
tuning grid
O
one-touch play
one-touch standby
options
U
update software (through Internet)
USB storage device
P
parental control
PBC (play back control)
picture options
picture resolution
picture settings
picture-in-picture
play disc
V
VCD
video connection (composite video)
video connection (HDMI ARC)
video connection (standard HDMI)
video formats
video options
video settings
play from PC
play USB storage device
power settings
predefined sound mode
preference
VOD code (DivX)
W
watch 3D
R
wired network
wireless network
recycling
region codes
remote control
repeat
S
shuffle
sleep timer
slide animation
SmartTV
software update
software version
sound
speaker position
speaker setup
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications are subject to change without notice
© 2013 Koninklijke Philips Electronics N.V.
All rights reserved.
HTB3510/3540/3570_12_UM_V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
|