FTS6000
Register your product and get suppor t at
EN Home Theatre System
5
IT
Sistema Home Theater 49
Download from Www.Somanuals.com. All Manuals Search And Download.
‘CONSUMERS SHOULD NOTETHAT NOT ALL HIGH
DEFINITIONTELEVISION SETS ARE FULLY
DK
Advarsel: Usynlig laserstråling ved åbning når
sikkerhedsafbrydere er ude af funktion. Undgå
utsættelse for stråling.
Bemærk: Netafbryderen er sekundært
indkoblet og ofbryder ikke strømmen fra
nettet. Den indbyggede netdel er derfor
tilsluttet til lysnettet så længe netstikket sidder i
stikkontakten.
COMPATIBLEWITHTHIS PRODUCT AND MAY CAUSE
ARTIFACTSTO BE DISPLAYED INTHE PICTURE. IN
CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDEDTHATTHE USER
SWITCHTHE CONNECTIONTOTHE ‘STANDARD
DEFINITION’ OUTPUT. IFTHERE ARE QUESTIONS
REGARDING OURTV SET COMPATIBILITYWITHTHIS
MODEL 525p AND 625p DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.’
S
Klass 1 laseraparat
Varning! Om apparaten används på annat
sätt än i denna bruksanvisning specificerats, kan
användaren utsättas för osynlig laserstrålning,
som överskrider gränsen för laserklass 1.
Observera! Stömbrytaren är sekundärt kopplad
och bryter inte strömmen från nätet. Den
inbyggda nätdelen är därför ansluten till elnätet
så länge stickproppen sitter i vägguttaget.
SF
Luokan 1 laserlaite
Varoitus! Laitteen käyttäminen muulla kuin
tässä käyttöohjeessa mainitulla tavalla saattaa
altistaa käyttäjän turvallisuusluokan 1 ylittävälle
näkymättömälle lasersäteilylle.
Oikeus muutoksiin varataan. Laite ei saa olla
alttiina tippu-ja roiskevedelle.
Huom. Toiminnanvalitsin on kytketty
toisiopuolelle, eikä se kytke laitetta irti
sähköverkosta. Sisäänrakennettu verkko-osa on
kytkettynä sähköverkkoon aina silloin, kun
pistoke on pistorasiassa.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows Media and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States and/
or other countries.
Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic, and the double-D
symbol are registered trademarks of Dolby
Laboratories.
HDMI, and HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC.
Manufactured under license under U.S. Patent
#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents
issued & pending. DTS and DTS Digital
Surround are registered trademarks and the
DTS logos and Symbol are trademarks of DTS,
Inc. © 1996-2007 DTS, Inc. All Rights Reserved.
The USB-IF Logos are trademarks of Universal
Serial Bus Implementers Forum, Inc.
DivX, DivX Ultra Certified, and associated logos
are trademarks of DivX, Inc. and are used under
license.
Official DivX® Ultra Certified product.
Plays all versions of DivX ® video (including
DivX ® 6) with enhanced playback of DivX®
media files and the DivX® Media Format.
LASER
• Type
Semiconductor laser
GaAIAs
• Wave length
• Output Power
• Beam divergence
650 - 660 nm (DVD)
784 - 796 nm (CD)
6 mW (DVD)
7 mW (VCD/CD)
60 degrees
CLASS 1
LASER PRODUCT
4
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Play
24
Contents
Play from disc
Play video
Play music
Play photo
Play from USB device
Play from portable media player
Play from radio
24
25
29
30
31
32
32
1 Important
6
Safety and important notice
6
2 Your product
7
Features highlight
Product overview
7
8
6 Adjust sound
35
Control the volume
Select surround sound
Select a preset sound effect
35
35
35
3 Connect
11
Place the unit
Connect video cables
Connect speakers to subwoofer
11
12
14
7 Adjust settings
36
Connect subwoofer and radio antenna 14
General setup
Audio setup
Video setup
Preferences
36
38
39
42
Connect audio cables/other devices
Mount Flavors frames
Attach table stand to the main unit
Mount the DVD HomeTheatre
unit/speakers
15
17
17
18
8 Additional information
44
Update software
Care
Specifications
44
44
45
4 Get started
19
Prepare the remote control
Find the correct viewing channel
Select menu display language
Turn on Progressive Scan
Activate EasyLink control
Select a play source
19
20
20
21
22
23
9 Troubleshooting
10 Glossary
46
48
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Recycle notice
1 Important
Your product is designed and manufactured
with highly quality material and components,
which can be recycled and reused. When this
crossed-out wheeled bin symbol is attached to
a product, it means the product is covered by
the European Directive 2002/96/EC.
Safety and important notice
Warning!
Risk of fire or electric shock!
• Ensure that air can circulate freely through the
ventilation holes on this unit. Allow at least 5~10 cm
clearance around the unit.
Please inform yourself about the local separate
collection system for electrical and electronic
products. Please act according to your local
rules and do not dispose your old products
with your normal household waste. The
correct disposal of your old product will help to
prevent potential negative consequences for
the environment and human health.
• Never expose this unit to direct sunlight, naked
flames or heat.
• Never place this unit on other electrical equipment.
• Keep away from this unit during lightning storms.
• Never remove the casing of this unit. Please leave all
maintenance work to qualified personnel.
• Keep this unit away from water, moisture and liquid-
filled objects.
Caution!
Copyright notice
• Remove batteries if they are exhausted or if the
remote control is not to be used for a long time.
• Do not mix batteries (old and new or carbon and
alkaline, etc.).
• Batteries contain chemical substances, they should
be disposed of properly.
This product incorporates copyright protection
technology that is protected by method claims
of certain U.S. patents and other intellectual
property rights owned by Macrovision
Corporation and other rights owners. Use of
this copyright protection technology must be
authorised by Macrovision Corporation, and is
intended for home and other limited viewing
uses only unless otherwise authorised by
Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
• Visible and invisible laser radiation when open.
Avoid exposure to beam.
• Where the MAINS plug or an appliance coupler is
used as the disconnect device, the disconnect device
shall remain readily operable.
This product complies with the radio
interference requirements of the European
Community. This product complies with the
requirements of the following directives and
guidelines: 2006/95/EC, 2004/108/EC.
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
USB direct and MP3 link
2 Your product
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
Simply plug your USB device into the USB
socket to play your MP3/WMA/JPEG/DivX files;
or plug your portable media player to the MP3
LINK socket to enjoy the music play in superb
sound quality.
This DVD Home Theatre is designed to
complement your home perfectly. Enjoy the
DVD Home Theatre with 2.1-channel surround
sound and excellent picture quality.
Sync the audio output with the video play
This DVD Home Theatre provides you the
feature of delaying the audio output if the video
signals that go directly to the TV is slower than
the audio streams.
Features highlight
Region codes
DVD movies are usually not released at the
same time in all regions of the world, thus all
DVD players are programmed to a specific
region code.
Video upscaling to 1080p
You can now watch the DVDs in the highest
picture quality available for your HDTV. This
DVD Home Theatre offers full high-definition
video playback up to 1080p resolution for an
amazing viewing experience. A highly detailed
picture and increased sharpness delivers a more
true-to-life picture.
Countries
DVD region code
Europe
ALL
EasyLink
Russia
EasyLink uses the HDMI CEC (Consumer
Electronics Control) industry standard protocol
to share functionality with all HDMI CEC
compliant devices over HDMI. It enables the
connected devices to control each other with a
single remote control.
ALL
Note
• Philips does not guarantee 100% interoperability
with all HDMI CEC devices.
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Product overview
Main unit
1
3
4
5
7
8
2
6
11
10
9
a 2 (Standby-on)
h FM radio antenna socket
• Turn on this unit or turn off to standby
mode.
• To connect radio antenna.
i AUX IN socket
b SOURCE
• To connect audio output from other
device to route its sound output to this
unit.
• Select a play media: DISC, FM, AUX,
DI (Digital Input) or MP3 LINK.
c PLAY/PAUSE u
j
(USB) socket
• Start or pause disc play.
• To connect USB flash drive, USB
memory reader or digital camera.
•
RADIO: start auto radio installation
(only available for first time setup).
k MP3 LINK socket
d VOLUME +-
• To connect portable audio player.
• Adjust the volume level.
e Display panel
f Disc compartment
g OPEN/CLOSE Z
• Open or close the disc compartment.
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
a 2
• Turn on this unit or turn off to standby
Remote control
mode.
• Press and hold to turn off this unit and
all the HDMI CEC compliant TV/
1
devices (for EasyLink control only).
2
3
4
b Z (Open/Close)
• Open or close the disc compartment.
11
c REPEAT / PROGRAM
5
• Select various repeat or shuffle modes;
turns off repeat or shuffle mode.
RADIO: press this button to start
manual radio preset.
RADIO: press and hold this button to
12
13
•
•
start automatic radio preset.
14
6
d ZOOM
• Zoom in or out the picture on the TV.
e INFO
• Display the current status or disc
15
16
7
8
17
9
information.
• Display photo files in 12 thumbnails
18
19
view.
f OPTIONS
• Access or exit Options menu (this
menu provides various setting options).
10
20
g u (Play/Pause)
• Start or pause disc play.
•
RADIO: start auto radio installation
(only available for first time setup).
h x (Stop)
• Stop disc play.
•
RADIO: erase the current preset radio
station.
i SOUND MODES +-
• Select a predefined sound effect.
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
p H(Mute)
• Mute or restore the volume.
q VOL +-
• Adjust the volume level.
r SURROUND
• Switch audio output to Dolby virtual
surround or stereo sound.
s Numeric buttons
• Enter a preset number or item to play.
t SUBTITLE
• Select DVD or DivX subtitle language.
j AUDIO/SYNC
• Select an audio language/channel.
• Press and hold to access audio sync
setting. Then press VOL +-to set
the audio delay time.
k Source buttons
•
AUX / MP3 LINK: switch to AUX, DI
(Digital Input) or MP3 LINK that
corresponds to the socket you used to
connect the external device.
•
USB / RADIO: press repeatedly to
switch to USB or FM mode.
•
DISC: switch to DISC mode.
l OK
• Confirm an entry or selection.
m Cursor buttons (vVbB)
• Navigate through the on-screen menu.
• Press left or right for fast forward and
backward search.
•
RADIO: press up or down to tune the
radio frequency.
•
RADIO: press left or right to start auto
search.
n BACK ꢀ
• Return to the previous display menu.
• For DVD, go to title menu.
• For VCD version 2.0 or SVCD with
PBC turned on: return to the menu
during playback.
o í/ë(Previous/Next)
• Skip to the previous or next title/
chapter/track.
•
RADIO: select a preset radio station.
10 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Connect
This section describes the basic connections
required for this DVD Home Theatre unit
before it can be used.
Place the unit
•
For optimum performance, place this unit
on top of a table or mount it on the wall.
Never place this unit in an enclosed cabinet.
Install this unit near the AC outlet where
the AC power plug can be easily reached.
•
•
Basic connections:
•
•
•
•
Place the unit
Connect video cables
Connect speakers to subwoofer
Connect subwoofer and radio antenna
LEFT
RIGHT
Optional connections:
•
Connect audio cables/other devices
• Connect audio from TV
• Connect audio from cable box/
recorder/game console
• Connect portable media player
• Connect USB device
Mount Flavors frames
Attach table stand to the main unit
Mount the DVD Home Theatre unit/
speakers
1 Place this DVD Home Theatre unit near to
the TV.
•
•
•
• Attach the table stand to the DVD
Home Theatre unit before place it on a
table top.
2 Place the speakers at the normal listening
ear-level and directly parallel to the
listening area.
Note
• Refer to the type plate at the rear or bottom of the
product for identification and supply ratings.
3 Place the subwoofer at the corner of the
room or at least one metre away from the
TV.
• Before you make or change any connections, ensure
that all the devices are disconnected from the power
outlet.
Note
• To avoid magnetic interference or unwanted noise,
never place the speakers too close to the TV or any
radiation devices.
EN 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Connect video cables
• The HDMI connector is only compatible with HDMI
compliant TVs and DVI-TVs.
This section describes how to connect this
DVD Home Theatre unit to your TV so to
enable viewing of disc play.
Tips
Select the best video connection that your TV
can support.
• To optimise the video output, see chapter ‘Adjust
settings’ > [ Video Setup ] > [ HDMI Setup ] for
details.
•
•
•
Option 1: Connect to HDMI socket (for a
HDMI, DVI or HDCP-compliant TV).
Option 2: Connect to Scart socket (for a
standard TV).
Option 3: Connect to component video
socket (for a standard TV or Progressive
Scan TV).
• This unit is HDMI CEC compatible. It enables
connected TV/device to control each other over
HDMI, see chapter ‘Activate EasyLink control’ for
details.
• Use a HDMI/DVI adaptor in case your TV has only
a DVI connection. An extra audio connection is
needed to complete this connection.
• This type of connections provide best picture quality.
•
Option 4: Connect to Video socket (for a
standard TV).
Option 2: Connect to Scart socket
Note
• You must connect this unit directly to a TV.
Option 1: Connect to HDMI socket
SCART
VIDEO OUT
HDMI IN
1 Connect the scart converter cable
(supplied) from the VIDEO OUT socket
on this unit to the scart input socket on
your TV.
HDMI OUT
1 Connect a HDMI cable (supplied) from the
HDMI OUT on this unit to the HDMI IN
socket on your TV.
12 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Option 3: Connect to component
video socket
Option 4: Connect to Video socket
VIDEO IN
VIDEO OUT
COMPONENT VIDEO OUT
1 Connect a composite video cable (not
supplied) from the VIDEO OUT socket on
this unit to the video input socket on your
TV.
1 Connect the component video cables (not
supplied) from the Y PB PR sockets on this
unit to the component video input sockets
on your TV.
Tips
• If a progressive scan TV is used, you
may turn on the progressive scan mode
(see chapter ‘Turn on Progressive Scan’
for details).
• The video input socket on your TV may be labelled
as A/V IN, VIDEO IN, COMPOSITE or BASEBAND.
• This type of connections provide standard picture
quality.
Tips
• The component video input socket on your TV may
be labelled as Y Pb/Cb Pr/Cr or YUV.
• This type of connections provide good picture
quality.
EN 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect speakers to
subwoofer
Connect subwoofer and radio
antenna
LEFT
2
3
RIGHT
1
1 Connect the left and right speakers to the
matching sockets on the subwoofer.
1 Connect the interconnect cable (supplied)
from the TO SUBWOOFER socket on
this unit to the TO MAIN UNIT socket on
the subwoofer.
Note
• Ensure that the front portion of the plug is fully
inserted into the socket.
2 Connect the FM antenna (supplied) and
FM extension cable (supplied) to the
FM75Ω socket. Extend the FM antenna
and fix its ends to the wall.
3 Connect the power cord when all the
required connections are complete and
you are ready to enjoy this DVD Home
Theatre unit.
14 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect audio from cable box/
recorder/game console
Connect audio cables/other
devices
This section describes how you can route the
sound from other devices to this DVD Home
Theatre unit in order to enjoy sound output or
audio play with surround capabilities.
AUX IN
Connect audio from TV
(also used for EasyLink control)
Connect to optical socket
1 Connect an audio cable (supplied) from
the AUX IN socket on this unit to the
AUDIO OUT sockets on the device.
Note
• To listen to the audio output from this connection,
press AUX / MP3 LINK repeatedly until ‘AUX’ is
displayed on the display panel.
OPTICAL
DIGITAL IN
• To route the audio from your TV to this DVD Home
Theatre unit, connect an audio cable from the audio
input on this unit to the audio output on your TV.
SPDIF OUT
(Optical)
1 Connect an optical cable (supplied) from
the DIGITAL IN-OPTICAL socket on this
unit to the SPDIF OUT/OPTICAL OUT
socket on your TV.
Note
• To listen to the audio output from this connection,
press AUX / MP3 LINK repeatedly until ‘DI’ is
displayed on the display panel.
EN 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect portable media player
Connect USB device
MP3 LINK
MP3
1 Connect the USB device to
(USB)
1 Connect a 3.5mm stereo audio cable
(supplied) from the MP3 LINK socket on
this unit to the phone socket on your
socket on this unit.
portable media player (such as MP3 player).
Note
• This DVD Home Theatre unit can only play/view
MP3, WMA, DivX (Ultra) or JPEG files that are
stored on such devices.
Note
• To listen to the audio output from this connection,
press AUX / MP3 LINK repeatedly until ‘MP3 LINK’
is displayed on the display panel.
• To listen to the audio output from this connection,
press USB.
16 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Mount Flavors frames
Attach table stand to the
main unit
1 Ensure all the required cables are
A
connected to this unit.
2 Place the main unit with the front panel
facing down on a flat surface.
3 Attach the table stand to the rear of this
unit and slide it to the left to lock into
position.
• To remove the table stand, hold the
bottom of the stand and slide it to the
right.
B
ADecorative frames
BFinger slot
C
Note
• To avoid damage to the unit, ensure that it is
placed on a stable surface before you carry out the
following actions.
1 Place the main unit and speakers with the
front panel facing up on a flat surface.
2 Align the frames with the front of the unit/
speakers.
3 Mount the frames.
Ctable stand
• To remove frame from the main unit,
pull off the frame using the finger slot.
Note
• Do not attach the table stand if you want to mount
this unit on the wall.
EN 17
Download from Www.Somanuals.com. All Manuals Search And Download.
• Before you mount the speaker, remove
its stand by pressing on the catches (A)
and pull it out.
Mount the DVD Home
Theatre unit/speakers
A
Caution!
• Risk of personal injury and damage to the unit.
Allow only qualified persons to mount the unit.
1 Ensure all the required cables are
connected to this unit.
2 Drill the screw holes and insert the rubber
wall plugs (not supplied) into the holes.
• Use the supplied mounting guide for
accurate screw positions.
3 Hook the DVD Home Theatre unit/
speakers firmly onto the screws.
Note
• The height of the screw positions is 23.5mm
difference between the main unit and the speakers.
18 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Control a play source
4 Get started
1 Select the source you wish to control by
pressing the DISC, USB/RADIO or
AUX/MP3 LINK button.
Prepare the remote control
2 Then select the desired function (for
example í, ë).
Navigate through the menu
1 Point the remote control directly at the
remote sensor on this unit and select the
desired function.
1 Push to open the battery compartment
cover.
2 Insert two batteries type R03 or AAA.
Match the indications (+-) inside the
battery compartment.
2 Use the following buttons on the remote
control to navigate through the on-screen
menus.
3 Close the cover.
Note
Button
Action
Move up or down.
v V
• If you are not going to use the remote control for a
long time, remove the batteries.
Move left or right.
b B
Confirm a selection.
Enter numbers.
EN 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Find the correct viewing
channel
Select menu display language
Note
1 Press 2to turn on the DVD Home
• You can skip this setting if this unit is connected to a
HDMI CEC compliant TV. It switches automatically
to the same OSD menu language as per your TV
setting.
Theatre unit.
2 Press DISC to switch to disc mode
3 Turn on the TV and switch it to the
1 Press DISC.
correct video-in channel.
2 Press OPTIONS.
• You may go to the lowest channel on
your TV, then press the Channel Down
button on your TVs remote control
until you see the Video In channel.
ꢁ
[ General Setup ] menu is displayed.
3 Press B.
• You may press °button repeatedly
4 Press vV to select [ OSD Language ] in
on your TVs remote control.
the menu, then press B.
• Usually this channel is between the
lowest and highest channels and may
be called FRONT, A/V IN, VIDEO, etc..
General Setup
Auto
Disc Lock
Themes
English
Dansk
Display Dim
Tips
Nederlands
Suomi
OSD Language
Screen Saver
Sleep
• See TVs user manual on how to select the correct
input on your TV.
Français
Deutsch
DivX(R) VOD Code
Italiano
• The language options are different
depending on your country or region.
It may not correspond to the illustration
shown here.
5 Press vV to select a language, then press
OK.
Tips
• To set the default language for DVD audio and disc
menu, see chapter ‘Adjust settings’ - [ Preferences ]
for details.
20 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
7 To exit the menu, press OPTIONS.
8 You can now turn on the progressive scan
mode on your TV (see the TV user
manual).
Turn on Progressive Scan
If you connect this unit to TV with the
component video connection (see chapter
‘Connect video cables - Option 3: Connect to
component video socket’ for details), you can
set the progressive scan output if your TV
supports progressive scan.
Note
• There are some progressive scan TVs that are
not fully compatible with this unit, resulting in an
unnatural picture when playing back a DVD VIDEO
disc in the progressive scan mode. In such case, turn
off the progressive scan feature on both this unit and
your TV.
1 Turn on the TV to the correct viewing
channel for this unit.
2 Press DISC.
3 Press OPTIONS.
4 Press V to select
[ Video Setup ] in the
menu, then press B.
Video Setup
Off
On
TV Type
TV Display
Progressive
Picture Setting
HDMI Setup
Closed Caption
5 Select [ Progressive ] > [ On ], then press
OK.
ꢁ
A warning message is displayed.
To proceed, select [ OK ] in the menu and
press OK.
6
ꢁ
The progressive setup is complete.
Note
• If a blank/distorted screen is displayed, wait for 15
seconds for the auto recover.
• If no picture displayed, turn off the progressive scan
mode as follows:
1) Press Z to open the disc compartment.
2) Press b.
3) Press AUDIO/SYNC.
EN 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Activate EasyLink control
• To enable one touch play function, a video disc must
be placed in the disc compartment before operation.
Your DVD Home Theatre System supports
Philips EasyLink, which enables one-touch play
and one-touch standby between EasyLink-
compliant devices. Compliant devices must be
connected to this unit via an HDMI connector.
• Philips does not guarantee 100% interoperability
with all HDMI CEC compliant devices.
Map the audio inputs to the
connected devices
1 Turn on the HDMI CEC operations on
your TV and other connected devices. See
TVs/devices manual for details.
Note
2 You can now enjoy the EasyLink controls.
• Before you start, ensure that an audio connection
has been made between this unit and your TV/
devices.
One-touch play [ Auto Wake-up TV ]
When you connect this unit to devices that
support one-touch play, you can control
your DVD Home Theatre System and the
devices with one remote control. For
example, when you press Play on your
DVD remote control, your TV
1 Press DISC.
2 Press OPTIONS.
3 Press V to select
[ Video Setup ] in
the menu, then press B.
automatically switches to the correct
channel to show the DVD content.
4 Select [ HDMI Setup ] > [ EasyLink ],
then press OK.
One-touch power off [ System Standby ]
When you connect this unit to devices
that support standby, you can use your
DVD remote control to put your DVD
Home Theatre System and all connected
HDMI devices in standby mode. You can
perform one-touch standby using the
remote control from any of the
EasyLink
Auto Wake-up TV
System Standby
System Audio Control
HDMI Input Mapping
connected HDMI devices.
•
[ Auto Wake-up TV ] and [ System
Standby ] functions are turned on by
default in the factory.
One touch audio input switching [ System
Audio Control ]
This unit is able to render the audio signals
from the active source. It switches
automatically to the corresponding audio
input and output the sound from its
speaker system.
• Before you can enjoy this function, you
have to map the audio inputs to the
connected devices.
5 Select [ System Audio Control ] > [ On ],
then press OK.
6 Select [ HDMI Input Mapping ], then press
OK.
• You can use any HDMI CEC TV/device
remote control to adjust the volume.
22 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Select [ OK ] in the menu, then press OK
Select a play source
to start scanning of devices.
ꢁ
Once complete, audio input mapping
menu is displayed.
On the main unit
HDMI Input Mapping
AUX
TV
Optical In
Other (Non-HDMI)
• For example, if your TV audio is
connected to the AUX IN sockets on
this unit, select [ AUX ] and map onto
the correct device (brand name) shown
at the right panel.
1 Press SOURCE button repeatedly to
select: DISC > FM > AUX > DI >
MP3 LINK > DISC ...
On the remote control
8 Select the audio input of this unit that is
used to connect to other HDMI device
(e.g. AUX, Optical In), then press B.
9 Select the correct device that connected
to this audio input, then press OK.
• Repeat steps 8~9 to map other
connected devices.
•
Press AUX / MP3 LINK repeatedly to listen
to the audio output from the external
device.
10 To exit the menu, press OPTIONS.
•
•
Press USB/RADIO repeatedly to switch to
USB or FM mode.
Press DISC to switch to DISC mode.
Display
AUX
Device connected to
AUX IN sockets.
DI
DIGITAL IN-OPTICAL
socket.
MP3 LINK
MP3 LINK socket.
EN 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
5 Play
• DVDs and DVD players are designed with regional
restrictions. Ensure that the DVD video you play is
for the same region zone as your player (indicated
on its rear).
• This unit can support playback of the following file
formats: MP3/WMA/JPEG/DivX.
Play from disc
Play a disc
Playable discs
Caution!
DVD Video
• Never place any objects other than discs into the
disc compartment.
• Region 2 (Europe)
• Region 5 (Russia)
• Never touch the disc optical lens inside the disc
compartment.
DVD±RW
(DVD Rewritable)
1 Press Z to open the disc compartment.
DVD±R
(DVD Recordable)
2 Insert a disc with its label facing out.
• For double-sided disc, load the side to
play faces out.
DVD+R DL
(DVD+R Double Layer)
3 Press Z to close the disc compartment
and start disc play.
CD-RW
(CD-Rewritable)
• To view disc play, turn on the TV to
the correct viewing channel for this
DVD Home Theatre unit.
ReWritable
Recordable
CD-R
(CD-Recordable)
4 To stop disc play, press x.
Tips
Audio CD
• If the password entry menu is displayed, you have to
enter the 6-digit password before it can be played.
(Compact Disc Digital Audio)
• Screen saver displays automatically if the disc play
is stopped for about 5 minutes. To wake up from
screen saver, press DISC.
Video CD
• Formats 1.0, 1.1, 2.0
• This unit automatically switches to standby mode if
you do not press any buttons within 15 minutes after
a disc has stopped playing.
Super Video CD
24 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Change video play
Play video
1 Play a title.
Note
2 Use the remote control to change the
• For video disc, playback always resumes from the
point where it was last stopped. To start playback
from the beginning, press í while the message is
displayed.
video play.
Button
Action
Change audio language.
• Only applicable to discs
with multiple audio
language or channel.
Control a title
Change subtitle language.
1 Play a title.
2 Use the remote control to control the title.
• Only applicable to discs
with multiple subtitle
language.
Button
Action
Toggle through various repeat/
shuffle play mode; or turn off
repeat mode.
Pause/ resume play.
• Repeat options vary
depending on the disc type.
Stop play.
• For VCDs, repeat play is
only possible if the PBC
mode is turned off.
Jump to the next title/chapter.
Return to the beginning of the
current title/chapter or jump to
the previous title/chapter.
Zoom in/out.
• To pan through the zoomed
image, press the cursor
buttons.
Search backward/ forward.
m M
v V
• To change search speed,
press this button repeatedly.
Display current play status.
• You can change the video
play options here without
interrupting disc play.
Slow motion reverse/ forward
play.
• To change play speed, press
this button repeatedly.
• For VCD, only forward play
is possible.
EN 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Select Digest Type:
Access DVD menu
Track Digest
Disc Interval
Track Interval
[ Track Digest ]
It plays the first few seconds of each track
in a disc.
1 Press DISC to access disc main menu.
[ Disc Interval ]
It divides the total disc time by six and
plays the first few seconds of these
intervals.
2 Select a play option, then press OK.
• In some menus, press number buttons
to input your selection.
• To return to the title menu during
[ Track Interval ]
playback, press BACK ꢀ.
It divides the current track by six and plays
the first few seconds of these intervals.
• This option is not available in stop
mode.
Access VCD menu or preview menu
The PBC (Playback Control) for VCD is turned
on by default in the factory. When you load in
a VCD, the contents menu is displayed.
3 Select a preview play option, then press
OK.
Tips
1 Press vV to select a play option, then
press OK to start play.
• The default setting for PBC is on. To change the
default setting, see chapter ‘Adjust settings’ -
[ Preferences ] > [ PBC ] for details.
• If PBC is off, it skips the menu and starts
play from the first title.
• During playback, you can press
BACK ꢀto return to the menu (if the
PBC mode is on).
2 To preview the contents of the disc, press
DISC.
• To exit the menu, press DISC.
26 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Sync audio output with video play
Quick skip play to a specific time
If the video play is slower than the audio output
(sound does not match with the pictures), you
can delay the audio output to match the video.
1 During playback, press INFO.
ꢁ
The disc status menu is displayed.
2 Select the current elapsed playing time in
the menu, then press OK.
•
•
•
•
[ TT Time ] (title time)
1 Press and hold AUDIO/SYNC until
[ CH Time ] (chapter time)
[ Disc Time ] (disc time)
[ Track Time ] (track time)
‘AUDIO SYNC XXX’ is displayed.
• ‘XXX’ denotes the delay time.
2 Within five seconds, press VOL +-to
3 Press the number buttons to change the
time where you want to skip to, then press
OK.
set the delay time for audio output.
Note
• If the volume control is not used within 5 seconds, it
resumes normal volume control function.
EN 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Set repeat play for a specific section
Play DivX® video
DivX video is a digital media format that retains
high quality despite a high rate of compression.
This unit is DivX® Certified so that you can
enjoy DivX video.
1 During playback, press INFO.
ꢁ
The disc status menu is displayed.
2 Press ꢂto highlight [ Repeat ] and press
OK to confirm.
1 Insert a disc or USB that contains the DivX
3 Press ꢃꢂto highlight [
].
videos.
4 Press OK to set the starting point.
2 Press DISC or USB.
ꢁ
A contents menu is displayed.
5 Press OK at the ending point.
ꢁ
Repeat play starts.
3 Select a title to play, then press u.
4 Use the remote control to control the title.
6 To cancel repeat play, press OK again.
Note
Button
Action
Change subtitle language.
• The marked section for repeat play is only possible
within a track/title.
Change audio language/track.
Switch camera angles
Stop play.
• For DivX Ultra video, press
this button again to display
the contents menu.
1 During playback, press INFO.
ꢁ
The disc status menu is displayed.
Display DivX Ultra video
information.
2 Press ꢂto highlight [ Angle ] option in
the menu.
3 Press ꢄand use the numeric keypad 0-9
to select different camera angles.
Note
ꢁ
Playback changes to the selected angle.
• Only those DivX videos that were rented or
purchased using the DivX registration code of this
unit can be played (see chapter ‘Adjust settings’ >
[ General Setup ] > [ DivX(R) VOD Code ] for
details).
• If the subtitle does not appear correctly, change the
subtitle language (see chapter ‘Adjust settings’ -
[ Preferences ] > [ DivX Subtitle ] for details).
• The subtitle can only be displayed up to an average
of 45 characters.
• This unit can play DivX video files that are up to 4GB
in size.
28 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Play MP3/WMA music
Play music
MP3/WMA is a type of highly compressed
Note
audio file (files with .mp3 or .wma extensions).
• For some commercial audio disc, playback may
resume from the point where it was last stopped. To
start play from first track, press í.
1 Insert a disc or USB that contains the MP3/
WMA music.
2 Press DISC or USB.
ꢁ
A contents menu is displayed.
Control a track
3 Select a folder, then press OK.
4 Select a track to play, then press u.
1 Play a track.
• To return to the main menu, press v
until ‘Previous’ folder is selected, then
press OK.
2 Use the remote control to control the
track.
Button
Action
Note
Pause/ resume play.
• For CDs recorded in multiple sessions, only the first
session is played.
• This unit does not support MP3PRO audio format.
Stop play.
• If any special characters are present in the MP3 track
name (ID3) or album name, it might not be displayed
correctly on the screen because these characters are
not supported.
Jump to the next track.
• Some WMA is protected by Digital Rights
Management (DRM), it cannot be played on this unit.
• Folders/files exceed the supported limit of this unit
will not be displayed or played.
Return to the beginning of the
current track or jump to the
previous track.
Tips
Direct input the track number.
• To display the data disc contents without folders, see
chapter ‘Adjust settings’ - [ Preferences ] >
[ MP3/JPEG Nav ] for details.
Search backward/ forward.
m M
• To change search speed,
press this button repeatedly.
Toggle through various repeat/
shuffle play mode; or turn off
repeat mode.
• Repeat options vary
depending on the disc type.
EN 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Play photo
• It may require longer time to display the disc content
on the TV due to the large number of songs/photos
compiled onto one disc.
• If the JPEG photo is not recorded with an ‘exif’
type file, the actual thumbnail picture will not be
shown on the display. It will be replaced with a ‘blue
mountain’ thumbnail picture.
Play photos as slideshow
This unit can play JPEG photos (files with .jpeg
or .jpg extensions).
• This unit can only display digital camera pictures
according to the JPEG-EXIF format, typically used by
almost all digital cameras. It cannot display Motion
JPEG and pictures in formats other than JPEG, or
sound clips associated with pictures.
1 Insert a disc or USB that contains the JPEG
photos.
• Folders/files exceed the supported limit of this unit
will not be displayed or played.
2 Press DISC or USB.
ꢁ
For a Kodak disc, the slideshow begins
automatically.
ꢁ
Control photo play
For a JPEG disc, the photo menu is
displayed.
1 Play photo slideshow.
3 Select the folder/album you want to play.
2 Use the remote control to control the
• To preview the photos in the folder/
photo.
album, press INFO.
Button
Action
Skip to the previous photo.
b
Skip to the next photo.
B
v
V
Rotate the photo clockwise.
Rotate the photo anti-
clockwise.
Zoom in/ out.
• Play will pause while in
zoom mode.
• To go to previous or next screen
display, press í/ ë.
Stop play.
• To select a photo, press the cursor
buttons.
• To display the selected photo only,
press OK.
4 Press u to start slideshow play.
• To return to the menu, press BACK ꢀ.
30 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Play musical slideshow
Play from USB device
Play MP3/WMA music files and JPEG photo
files simultaneously to create musical slideshow.
The MP3/WMA and JPEG files must be stored
on the same disc or USB device.
This unit can only play/view MP3, WMA, DivX
(Ultra) or JPEG files that are stored on such
devices.
1 Play MP3/WMA music.
2 Navigate to the photo folder/album and
press u to start slideshow play.
ꢁ
Slideshow begins and continues till the
end of the photo folder or album.
ꢁ
Audio continues to play till the end of
the disc.
• To return to the menu, press BACK ꢀ.
1 Connect a digital camera that comply with
3 To stop slideshow play, press x.
4 To stop music play, press x again.
the PTP standard, USB flash drive, or USB
memory card reader to the
socket on this unit.
(USB)
2 Press USB.
ꢁ
A contents menu is displayed.
3 Select a file to play, then press u.
• For more information, see chapters
‘Play music, Play photo, Play video’ for
details.
4 To stop play, press x or remove the USB
device.
Tips
• If the device does not fit into the USB socket,
connect it through a USB extension cable.
• If a multiple USB card reader is used, only one of the
connected USB drive contents can be accessed.
• If a USB HDD is used, ensure that an auxiliary
power cord connected to the USB HDD for proper
operations.
• Digital cameras that use PTP protocol or require
additional programme installation when connected
to a PC are not supported.
EN 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Play from portable media
player
Play from radio
Check if the FM extension cable and the FM
antenna has been connected to this DVD
Home Theatre unit. If not, connect the supplied
cables to the FM 75Ω socket and fix its ends to
the wall.
Simply connect your portable media player (e.g.
MP3 player) to this unit to enjoy superb sound
quality from your music collections.
MP3 LINK
1 Connect a 3.5mm stereo audio cable
(supplied) from the MP3 LINK socket on
this unit to the ‘headphone’ socket on your
portable media player.
Tips
• For better FM stereo reception, connect an external
FM antenna (not supplied).
• Position the antenna as far away as possible from
your TV, VCR or other radiation source to prevent
interference.
2 Press AUX / MP3 LINK repeatedly until
‘MP3 LINK’ is displayed.
3 Start play on your portable media player.
• See chapter ‘Adjust Sound’ to enhance
the audio output.
4 To stop play, press STOP button on your
portable media player.
Note
• Control playback is only possible on your portable
media player.
• Stop play on the portable media player before you
switch to other play media/source.
32 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
First time tuning
Listen to radio
The first time when you access ‘RADIO’ mode,
follow the instructions to install the radio
stations.
1 Press RADIO.
2 Use the remote control to control the
radio.
1 Press RADIO.
ꢁ
’AUTO INSTALL ... PRESS PLAY’ is
displayed.
Button
Action
Select a preset radio station.
2 Press u.
ꢁ
ꢁ
All detected radio stations are stored.
Tune the radio frequency
backward/ forward.
m M
Once complete, it tunes to the first
preset radio station.
Press and hold this button to
delete the preset station from
the preset list.
• To stop auto tuning, press x.
• The preset number for
other radio stations
remain unchanged.
Note
• This unit can store up to a maximum of 40 radio
stations.
• If auto installation is not activated or less than 5
radio stations are stored, ‘AUTO INSTALL’ will be
displayed again the next time you turn on to radio
mode.
Reinstall all the radio stations
• If the FM radio station transmits RDS (Radio Data
System) data, the name of the radio station will be
displayed.
1 Press RADIO.
2 Press and hold PROGRAM until ‘START’ is
displayed.
ꢁ
All previously stored radio stations will
be replaced.
Note
• If no stereo signal is detected or less than 5 stations
are detected during radio installation, ‘CHECK
ANTENNA’ is displayed.
EN 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Search and store radio stations
individually
1 Press RADIO.
2 Press m M.
ꢁ
The radio frequency indication starts to
change until a radio station is detected.
3 Repeat step 2 until you tune to the radio
station you wish to store.
• To finetune the radio frequency, press
vV.
4 Press PROGRAM.
• If no action is carried out within 20
seconds after the above step, it exits
the preset mode.
5 Press íë(or the number buttons) to
select a preset number to store.
6 Press PROGRAM to confirm.
34 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Adjust sound
Select a preset sound effect
Control the volume
1 Press VOL +-to increase or decrease
the volume level.
• To mute the volume, press H.
• To restore the volume, press Hagain
or press the volume button.
1 Press SOUND MODES +-repeatedly
to select a sound effect that most suits the
video or music you play.
Video /
Music
Descriptions
Select surround sound
Flat and pure sound mode.
Ideal for listening to classical
music and watching live
concert DVDs.
CONCERT /
CLASSIC
Moderate sound mode
suitable for lounge music
and watching dramas.
DRAMA /
LOUNGE
Enhanced low and high
range for great sounding
movie effects and
atmosphere. Great for
action movies and rock/pop
music.
ACTION /
ROCK
1 Press SURROUND repeatedly to select a
best surround output that available on the
disc.
Moderate mid range and
surround effects for clear
vocals and the atmosphere
of a live sports venue, also
ideal video gaming.
GAMING /
SPORTS
Options
Descriptions
Dolby Virtual surround sound.
Stereo sound.
DOLBY VS
STEREO
Dynamically controlled
sound mode suitable for
watching movies at night or
for non-intrusive
NIGHT
background music.
EN 35
Download from Www.Somanuals.com. All Manuals Search And Download.
[ Disc Lock ]
7 Adjust settings
This section describes the various setting
options of this unit.
Set play restriction for a specific discs.
Before you start, place the disc in the disc
compartment (maximum 40 discs can be
locked).
•
[ Lock ] – restrict access to the current
disc. The next time you want to play
this disc or unlock it, you need to enter
the password.
Symbol
Options
[
[
[
[
]
General Setup
]
Audio Setup
Video Setup
Preferences
•
[ Unlock ] – all discs can be played.
]
Tips
• To set or change your password, go to
[ Preferences ] > [ Password ].
]
[
]
Themes
General setup
Set the theme for wallpaper, preview
thumbnail, photo digest and mp3 browser
menu.
1 Press OPTIONS.
ꢁ
1. To start, select [ Themes ], then press
[ General Setup ] menu is displayed.
OK.
2 Press B.
3 Select an option, then press OK.
Themes
PureWhite
(Default)
General Setup
Disc Lock
Themes
Display Dim
OSD Language
Screen Saver
Sleep
2. Press ꢅor ꢄto select a theme, then
press OK.
DivX(R) VOD Code
3. Select [ Yes ], then press OK to
confirm.
• See the explanations of the above
options in the following pages.
4 Select a setting, then press OK.
• To return to the previous menu, press
BACK ꢀ.
• To exit the menu, press OPTIONS.
36 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
[ Display Dim ]
Change the brightness level of the display
panel to suit the lighting in your room.
•
•
•
[ 100% ] – normal brightness.
[ 70% ] – medium brightness.
[ 40% ] – dimmest display. The LEDs
and display icons will not be shown.
[ OSD Language ]
Select the default on-screen menu
language.
[ Screen Saver ]
Turn off or on the screen saver mode. It
helps to protect the TV screen from being
damage due to over exposure to a static
image for too long.
•
[ On ] – set the screen saver to appear
after 5 minutes of inactivity (for
example, in pause or stop mode).
•
[ Off ] – disable screen saver mode.
[ Sleep ]
Switch to standby automatically after the
preset time.
•
•
[ Off ] – disable sleep mode.
[ 15, 30, 45, 60 mins ] – select the
count down time before it switches to
standby.
[ DivX(R) VOD Code ]
Display the DivX® registration code.
Tips
• Enter this unit’s DivX registration code when you
The DivX videos rented or purchased through the
DivX® VOD (Video On Demand) service can be
played only on the device to which it is registered.
EN 37
Download from Www.Somanuals.com. All Manuals Search And Download.
[ HDMI Audio ]
Audio setup
When you connect this unit and TV with
HDMI cable, select the audio output
setting for this connection.
1 Press OPTIONS.
ꢁ
[ General Setup ] menu is displayed.
•
[ All ] – the sound is output through
both your TV and this speaker system.
If the audio format on the disc is not
supported, it will be downmixed to
two-channel sound (linear-PCM).
2 Press V to select
[ Audio Setup ], then
press B.
3 Select an option, then press OK.
•
[ Off ] – disable audio output from
your TV. The sound is only output
through this speaker system.
Audio Setup
Speakers Volume
HDMI Audio
CD Upsampling
Audio Sync
[ CD Upsampling ]
Convert the music CD to a higher
sampling rate using sophisticated digital
signal processing for better sound quality.
•
•
[ Off ] – turn off CD-upsampling.
[ 88.2 kHz (X2) ] – convert the
sampling rate of the CDs twice as high
as the original rate.
• See the explanations of the above
options in the following pages.
Note
4 Select a setting, then press OK.
• When you press SURROUND to switch to multi-
channel mode, it automatically turns off the CD-
upsampling feature.
• To return to the previous menu, press
BACK ꢀ.
• To exit the menu, press OPTIONS.
[ Audio Sync ]
[ Speakers Volume ]
Set the default delay time for audio output
when you play a video disc.
When the speakers are not placed in an
equal distance from the listening position,
change the volume level of the speakers so
that for those placed closer to the listening
position will not sound too loud.
1. To start, press OK.
2. Select a speaker delay in the menu,
then press b B to set the delay time.
3. Press OK to confirm and exit.
1. To start, press OK.
2. Select a speaker in the menu, then
press b B to adjust the volume level.
3. Press OK to confirm and exit.
Tips
• The test tone is emitted from the speaker while
adjusting volume level.
38 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
[ TV Type ]
Video setup
Change this setting only if the video does
not appear correctly. By default, this
setting matches the most common setting
for TVs in your country.
1 Press OPTIONS.
ꢁ
[ General Setup ] menu is displayed.
•
•
•
[ PAL ] – for PAL-system TV.
[ NTSC ] – for NTSC-system TV.
[ Multi ] – for TV that is compatible
with both PAL and NTSC.
2 Press V to select
[ Video Setup ], then
press B.
3 Select an option, then press OK.
[ TV Display ]
Video Setup
Select the screen format according to how
you want the picture to appear on your
TV.
TV Type
TV Display
Progressive
Picture Setting
HDMI Setup
Closed Caption
4:3 Pan Scan (PS)
4:3 Letter Box (LB)
16:9 (Wide Screen)
•
•
•
[ 4:3 Pan Scan ] – for standard TV, a
full-height screen display with the sides
trimmed.
[ 4:3 Letter Box ] – for standard TV, a
‘wide-screen’ display with black bars on
the top and bottom.
• See the explanations of the above
options in the following pages.
4 Select a setting, then press OK.
• To return to the previous menu, press
BACK ꢀ.
• To exit the menu, press OPTIONS.
[ 16:9 Wide Screen ] – for wide-screen
TV (frame ratio 16:9).
[ Progressive ]
If your TV can support progressive signals,
you can activate the progressive scan
mode of this unit.
•
[ On ] – turn on progressive scan
mode.
•
[ Off ] – disable progressive scan mode.
Tips
• See chapter ‘Get Started - Turn on Progressive Scan’
for detailed information.
EN 39
Download from Www.Somanuals.com. All Manuals Search And Download.
[ Picture Setting ]
•
[ HDMI Video ] – select a video
resolution that is compatible with your
TV display capability.
Select a predefined set of picture colour
settings or customise your personal setting.
•
•
•
•
[ Standard ] – original colour setting.
[ Bright ] – vibrant colour setting.
[ Soft ] – warm colour setting.
[ Personal ] – customise the colour
setting. Set the level of brightness,
contrast, tint and colour saturation in
the menu, then press OK.
Options
Descriptions
[ Auto ]
It detects and selects the
best supported video
resolution automatically.
[ 480p, 576p,
720p, 1080i,
1080p ]
Select a video resolution
that best supported by
your TV. See your TVs
manual for details.
[ HDMI Setup ]
When you connect this unit and TV with
HDMI cable, select the best HDMI setup
that your TV can support.
Note
• If the setting is not compatible with your TV, a
blank screen appears. Wait for 15 seconds for auto
recover or switch to its default mode as follows:
1) Press Z. 2) Press b. 3) Press ZOOM.
•
[ Wide Screen Format ] – define the
wide screen format for disc play.
•
[ EasyLink ] – enable all the HDMI CEC
compliant TV/device response or react
to certain commands simultaneously
with one touch control.
Options
Descriptions
[ Superwide ]
Centre position of the
screen is stretched less
than the side. This
setting is only applicable
if the video resolution is
set to 720p or 1080i/p.
Options
Descriptions
[ Auto Wake- It wake-ups your TV
up TV ]
automatically when you
press PLAY to power up
this unit and start disc
play (if a video disc is
found in the disc
[ 4:3 Pillar
Box ]
No stretching of the
picture. Black bars are
displayed on both sides
of the screen.
compartment).
• To disable this feature,
select [ Off ].
[ Off ]
Picture will be displayed
according to the format
of the disc.
[ System
Standby ]
Respond to standby
command from other
HDMI CEC compliant
TV/devices.
Note
• This setting is only available if you have set the [ TV
Display ] setting to [ 16:9 Wide Screen ].
• To disable this feature,
select [ Decline ].
40 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
[ Closed Caption ]
[ System Audio It enables this DVD
Turn on or off display captions.
Control ]
Home Theatre unit to
switch automatically to
the audio input of the
active device.
• To enable this feature,
select [ On ]. Then
proceed to [ HDMI
Input Mapping ] to
scan and map all the
connected devices.
•
[ On ] – show the sound effects in
subtitle. Only applicable to disc with
Closed Caption information included
and your TV supports this feature.
•
[ Off ] – disable closed caption.
[ HDMI Input Map the audio input to
Mapping ]
the connected TV/
devices correctly to
enable automatic
switching of input source.
1. Press OK to start
scanning of devices.
2. Select the audio input
to map (e.g. AUX,
Optical In), then press
B.
3. Select the correct
device that connected
to this audio input,
then press OK.
Note
• Your TV and other connected devices must be
compliant with HDMI CEC.
• You must turn on the HDMI CEC operations on
your TV/devices before you can enjoy the EasyLink
controls. See your TVs/devices manual for details.
• Philips does not guarantee 100% interoperability
with all HDMI CEC compliant devices.
EN 41
Download from Www.Somanuals.com. All Manuals Search And Download.
[ Audio ]
Preferences
Select the default audio language for
DVDs.
1 Press OPTIONS.
[ Subtitle ]
ꢁ
[ General Setup ] menu is displayed.
Select the default subtitle language for
DVDs.
2 Press V to select
[ Preferences ], then
press B.
[ Disc Menu ]
3 Select an option, then press OK.
Select the menu language for DVDs.
Preferences
Note
Audio
• If the language you have set is not available on the
disc, the disc uses its own default language.
Subtitle
Disc Menu
Parental
• For some DVDs, the subtitle/audio language can only
be changed from the disc menu.
• To select the languages that are not listed in the
menu, select [ Others ]. Then check the Language
Code list at the back of this user manual and enter
the respective 4-digit language code.
PBC
MP3/JPEG Nav
Password
DivX Subtitle
• See the explanations of the above
options in the following pages.
[ Parental ]
Restrict access to DVDs that are
unsuitable for your children. These types
of DVDs must be recorded with ratings.
4 Select a setting, then press OK.
• To return to the previous menu, press
BACK ꢀ.
1. To start, press OK.
• To exit the menu, press OPTIONS.
2. Select a rating level in the menu, then
press OK.
3. Press the number buttons to enter
your 6-digit password.
Note
• Rated DVDs above the level you set in [ Parental ]
require a password to be played.
• The ratings are country-dependent. To allow all discs
to play, select ‘8’.
• Some DVDs have ratings printed on them but are
not recorded with ratings. This function has no
effect on such DVDs.
Tips
• To set or change your password, go to
[ Preferences ] > [ Password ].
42 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
[ PBC ]
[ DivX Subtitle ]
For VCDs/SVCDs recorded with PBC
(playback control), you can access the disc
content through an interactive menu.
Select a character set that supports the
DivX subtitle.
[ Standard ]
English, Irish, Danish,
•
[ On ] – an index menu is displayed
Estonian, Finnish, French,
German, Italian, Portuguese,
Luxembourgish, Norwegian
(Bokmål and Nynorsk),
Spanish, Swedish, Turkish
when you load a disc for play.
•
[ Off ] – skip the menu and start play
from the first title.
[ MP3/JPEG Nav ]
[ Central
Europe ]
Polish, Czech, Slovak,
Albanian, Hungarian,
Slovene, Croatian, Serbian
(Latin script), Romanian
Turn off or on MP3/WMA folder display
when you play a media that contains MP3/
WMA files.
•
•
[ Without Menu ] – display all the files.
[ With Menu ] – display the folders of
[ Cyrillic ]
Belarusian, Bulgarian,
Ukrainian, Macedonian,
Russian, Serbian
MP3/WMA files.
[ Password ]
[ Greek ]
Greek
Follow the instructions on the TV to set or
change the password for locked discs and
play restricted DVDs.
[ Hebrew ]
Hebrew
[ Chinese
(Simp) ]
Simplified Chinese
Change Password
Old Password
[ Korean ]
Korean
Note
New Password
Confirm PWD
• Ensure that the subtitle file has the exact same file
name as the movie file. If for example the filename of
the movie is ‘Movie.avi’, then you will need to name
the text file ‘Movie.sub’ or ‘Movie.srt’.
OK
1. Press the number buttons to enter
‘136900’ or your last set 6-digit
[ Default ]
password at [ Old Password ] field.
Reset all the settings of this unit to factory
default, except for [ Disc Lock ],
2. Enter the new password at [ New
Password ] field.
[ Password ] and [ Parental ] settings.
3. Enter the new password again at
[ Confirm PWD ] field.
[ Version info ]
4. Press OK to exit the menu.
Display the software version of this unit.
Note
Tips
• If you forget your 6-digit password, enter ‘136900’
before you set a new password.
• This information is required when you want to find
out if a newest software version is available at the
Philips website that you may download and install on
this unit.
EN 43
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Insert the CD-R or USB flash drive to this
Home Theatre unit.
8 Additional
information
7 Press DISC or USB, then follow the
instruction on the TV to confirm update
operation.
Note
• Do not remove the CD-R or USB when software
updating is in progress.
Update software
Philips provides software updates to ensure that
this unit is compatible with the newest formats.
8 Once software update is complete, this
unit turns off to standby automatically.
To check for updates, compare the current
software version of this unit with the latest
software version available at the Philips website.
Note
• We recommend that you disconnect the power cord
for a few seconds and connect again to reboot the
system.
1 Press OPTIONS, .
Preferences
Disc Menu
Parental
Care
PBC
MP3/JPEG Nav
Caution!
Password
DivX Subtitle
Default
• Never use solvents such as benzene, thinner,
cleaners available commercially, or anti-static sprays
intended for discs.
Version Info
2 Select [ Preferences ] > [ Version Info ],
Clean discs
then press OK.
Wipe the disc with a micro fibre cleaning cloth
from the centre to the edge in a straight line
movement.
3 Write down the version number, then
press OPTIONS to exit the menu.
the latest software version available for this
unit.
Clean main unit screen
Wipe the screen surface with a micro fibre
cleaning cloth.
5 If the latest software version is higher than
the software version of this unit, download
it and store onto a CD-R or USB flash
drive.
44 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio
Specifications
• Tuning range: FM 87.5-108 MHz (50 kHz)
• 26dB quieting sensitivity: FM 22 dBf
• IF rejection ratio: FM 60 dB
Note
• Signal-to-noise ratio: FM 60 dB
• Harmonic distortion: FM 3%
• Frequency response: FM 180 Hz - 10 kHz /±6dB
• Stereo separation: FM 26 dB (1 kHz)
• Stereo Threshold: FM 29 dB
• Specification and design are subject to change
without notice.
Accessories supplied
• Quick Start Guide
• Remote control and batteries
• HDMI cable
• Scart converter cable
• Interconnect cable (connect between main unit and
subwoofer)
• Optical cable
• Audio cable
• 3.5mm stereo audio cable (for MP3 LINK)
• Power cable
• Subwoofer
• 2 speakers
• Table stand (for main unit)
• FM wire antenna
• FM extension cable
• Micro fibre cleaning cloth
• Mounting guide
USB
• Compatibility: Hi-Speed USB (2.0)
• Class support: UMS (USB Mass Storage Class)
Power (Subwoofer)
• Power supply: 220-240V, ~50 Hz
• Power consumption: 75 W
• Standby power consumption: < 1 W
• System: Bass Reflex System
• Impedance: 8 ohm
• Speaker drivers: 165 mm (6 1/2”) woofer
• Frequency response: 55 Hz - 150 Hz
• Dimensions (WxHxD): 202 x 300 x 380 (mm)
• Weight: 5.55 kg
Main unit
• Dimensions (WxHxD): 315 x 199 x 106 (mm)
• Net Weight: 1.7 kg
Amplifier
• Total output power (Home Theatre): 300W
• Frequency response: 180 Hz~18 kHz / ±3dB
• Signal-to-noise ratio: > 60 dB (A-weighted)
• Input sensitivity
Speakers
• System: full range satellite
• Speaker impedance: 4 ohm/channel
• Speaker drivers: 3”woofer + 0.8” tweeter
• Frequency response: 150 Hz - 20 kHz
• Dimensions (WxHxD): 180 x 199 x 106 (mm)
• Weight: 1.1 kg
•
•
AUX IN: 1300+/-200 mV
MP3 LINK: 1300+/-200 mV
Disc
• Laser Type: Semiconductor
• Disc diameter: 12cm / 8cm
• Video decording: MPEG1/ MPEG2 / DivX / DivX Ultra
• Video DAC: 12 bits, 108 MHz
• Signal system: PAL / NTSC
• Video S/N: 56 dB
• Audio DAC: 24 bits / 96 kHz
• Frequency response:
4 Hz - 20 kHz (44.1 kHz)
4 Hz - 22 kHz (48 kHz)
4 Hz - 44 kHz (96 kHz)
• PCM: IEC 60958
• Dolby Digital, DTS: IEC60958, IEC61937
EN 45
Download from Www.Somanuals.com. All Manuals Search And Download.
9 Troubleshooting
Warning!
• Risk of electric shock. Never remove the casing of
this unit.
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this unit, check the following
points before requesting service. If the problem remains unsolved,
Main unit
The buttons on this unit do
not work.
•
•
Disconnect this unit from the power outlet for a few minutes,
then connect again.
Ensure that the interconnect cable from the subwoofer is
connected to the DVD Home Theatre unit.
Picture
No picture.
•
See TVs manual for correct video input channel selection.
Change the TV channel until you see the DVD screen.
Press DISC.
If this happens when you turn on the progressive scan setting or
change the TV type setting, you have to switch to its default
mode:
•
•
1. Press Z to open the disc compartment.
2. Press b.
3. Press AUDIO/SYNC (for progressive scan) or SUBTITLE
(for TV Type).
No picture on HDMI
connection.
•
•
Check if the HDMI cable is faulty. Replace a new HDMI cable.
If this happens when you change the HDMI video resolution,
you have to switch to its default mode:
1. Press Z to open the disc compartment.
2. Press b.
3. Press ZOOM.
46 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound
No sound.
•
•
Ensure that the audio cables are connected and press the
correct input source (for example, AUX/MP3 LINK, USB) to
select the device you want to play.
No sound on HDMI
connection.
You may not hear any sound from the HDMI output if the
connected device is non-HDCP compliant or only DVI-
compatible.
•
•
Ensure that the [ HDMI Audio ] setting is turned on.
No sound from TV
programme.
Connect an audio cable from the AUDIO input on this unit to
the AUDIO output on your TV. Then press AUX/MP3 LINK
repeatedly to select the corresponding audio input source.
Play
DivX video files cannot be
played.
•
•
Ensure that the DivX file is encoded according to the ‘Home
Theatre Profile’ with the DivX encoder.
Ensure that the DivX video file is complete.
The aspect ratio of the
screen is not aligned with
the TV display setting.
•
The aspect ratio is fixed on the DVD.
DivX subtitle are not
displayed correctly.
•
•
Ensure that the subtitle file name is the same as the movie file
name.
Select the correct character set.
1. Press OPTIONS.
2. Press B, then select [ DivX Subtitle ] in the menu.
3. Select the character set that supports the subtitle.
The contents of the USB
flash drive cannot be read.
•
•
The USB flash drive format is not compatible with this unit.
Drive is formatted with different file system which is not
supported by this unit (e.g. NTFS).
•
Maximum size of memory supported is 160GB.
EN 47
Download from Www.Somanuals.com. All Manuals Search And Download.
JPEG
10 Glossary
A very common digital still picture format. A
still-picture data compression system proposed
by the Joint Photographic Expert Group, which
features small decrease in image quality in spite
of its high compression ratio. Files are
recognised by their file extension ‘JPG or JPEG’.
Aspect ratio
Aspect ratio refers to the length to height ratio
of TV screens. The ratio of a standard TV is
4:3, while the ratio of a high-definition or wide
TV is 16:9. The letter box allows you to enjoy
a picture with a wider perspective on a standard
4:3 screen.
MP3
A file format with a sound data compression
system. ‘MP3’ is the abbreviation of Motion
Picture Experts Group 1 (or MPEG-1) Audio
Layer3. By using the MP3 format, one CD-R or
CD-RW can contain about 10 times more data
than a regular CD. Files are recognised by their
file extension ‘.MP3’.
DivX
The DivX code is a patent-pending, MPEG-4
based video compression technology,
developed by DivX Networks, Inc., that can
shrink digital video to sizes small enough to be
transported over the internet, while maintaining
high visual quality.
MPEG
Motion Picture Experts Group. A collection of
compression systems for digital audio and
video.
Dolby Digital
A surround sound system developed by Dolby
Laboratories containing up to six channels of
digital audio (front left and right, surround left
and right, centre and subwoofer).
PBC
Playback Control. A system of navigating a
Video CD/Super VCD through on-screen
menus recorded onto the disc. You can enjoy
interactive playback and searching.
HDMI
High-Definition Multimedia Interface (HDMI) is
a high-speed digital interface that can transmit
uncompressed high definition video and digital
multichannel audio. It delivers high quality
picture and sound quality, completely free from
noise. HDMI is fully backward-compatible with
DVI.
PCM
Pulse Code Modulation. A digital audio
encoding system.
Progressive Scan
The progressive scan displays twice the number
of frames per seconds than ordinary TV system.
It offers higher picture resolution and quality.
As required by the HDMI standard, connecting
to HDMI or DVI products without HDCP
(High-bandwidth Digital Content Protection)
will result in no Video or Audio output.
WMA
Windows Media™ Audio. Refers to an audio
compression technology developed by
Microsoft Corporation. WMA data can be
encoded by using Windows Media Player
version 9 or Windows Media Player for
Windows XP. Files are recognised by their file
extension ‘WMA’.
HDCP
High-bandwidth Digital Content Protection is a
specification that provides a secure transmission
of digital contents between different devices (to
prevent unauthorised copyright).
48 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code
Abkhazian
Afar
Afrikaans
Amharic
6566
6565
6570
6577
6582
7289
6583
6569
6589
6590
7783
6665
6669
6678
6672
6673
7866
6683
6682
6671
7789
6983
6765
6772
6769
Inupiaq
Irish
Íslenska
Italiano
Ivrit
Japanese
Javanese
Kalaallisut
Kannada
Kashmiri
Kazakh
Kernewek
Khmer
7375
7165
7383
7384
7269
7465
7486
7576
7578
7583
7575
7587
7577
8287
7589
7586
7579
Pushto
8083
8285
8185
8277
8279
8278
8377
8371
8365
8367
8382
8378
8381
8368
8373
8373
8376
8379
8384
7882
8385
7073
8387
8383
8386
8476
8489
8471
8465
8484
8469
8472
6679
8473
8479
8483
8478
8482
8475
8487
8571
8575
8582
8590
8673
8679
8765
6789
8779
8872
8973
8979
9085
Russian
Quechua
Raeto-Romance
Romanian
Rundi
Samoan
Sango
Sanskrit
Sardinian
Serbian
Shona
Arabic
Armenian
Assamese
Avestan
Aymara
Azerhaijani
Bahasa Melayu
Bashkir
Belarusian
Bengali
Bihari
Bislama
Bokmål, Norwegian
Bosanski
Brezhoneg
Bulgarian
Burmese
Castellano, Español
Catalán
Chamorro
Chechen
Chewa; Chichewa; Nyanja7889
Shqip
Sindhi
Kinyarwanda
Kirghiz
Komi
Sinhalese
Slovensky
Slovenian
Somali
Sotho; Southern
South Ndebele
Sundanese
Suomi
Swahili
Swati
Svenska
Tagalog
Tahitian
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga (Tonga Islands)
Tsonga
Tswana
Türkçe
Turkmen
Twi
Uighur
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Walloon
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Korean
Kuanyama; Kwanyama 7574
Kurdish
Lao
Latina
Latvian
Letzeburgesch;
Limburgan; Limburger 7673
Lingala
Lithuanian
Luxembourgish;
Macedonian
Malagasy
Magyar
Malayalam
Maltese
Manx
Maori
Marathi
Marshallese
Moldavian
Mongolian
Nauru
Navaho; Navajo
Ndebele, North
Ndebele, South
Ndonga
Nederlands
Nepali
Norsk
Northern Sami
North Ndebele
Norwegian Nynorsk;
Occitan; Provencal
Old Bulgarian;Old Slavonic 6785
Oriya
Oromo
Ossetian; Ossetic
Pali
Panjabi
Persian
Polski
Português
7585
7679
7665
7686
7666
7678
7684
7666
7775
7771
7285
7776
7784
7186
7773
7782
7772
7779
7778
7865
7886
7868
7882
7871
7876
7869
7879
8369
7868
7878
7967
9072
9065
中文
Chuang; Zhuang
Church Slavic; Slavonic 6785
Chuvash
Corsican
Česky
6786
6779
6783
6865
6869
6890
6978
6979
6984
6985
6976
7079
7082
7089
7074
Dansk
Deutsch
Dzongkha
English
Esperanto
Estonian
Euskara
ꢀꢁꢁꢂꢃꢄꢅꢆ
Faroese
Français
Frysk
Fijian
Gaelic; Scottish Gaelic 7168
Gallegan
Georgian
Gikuyu; Kikuyu
Guarani
Gujarati
Hausa
Herero
Hindi
Hiri Motu
Hrwatski
Ido
7176
7565
7573
7178
7185
7265
7290
7273
7279
6779
7379
7982
7977
7983
8073
8065
7065
8076
8084
Interlingua (International)7365
Interlingue
Inuktitut
7365
7385
Download from Www.Somanuals.com. All Manuals Search And Download.
Numeri di telefono dell’Assistenza Clienti Philips:
Italia
848390207
€0.08 Al minuto
© 2008 Koninklijke Philips Electronics N.V.
All right reserved
sgpjy_0837_EN_IT
Download from Www.Somanuals.com. All Manuals Search And Download.
|