HC8300
Wireless FM Stereo Headphone
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
_________________
_______________
_______________
English
4
10
16
22
28
34
40
46
Svenska
52
58
64
70
76
82
88
94
________________
Français
Español
Deutsch
Norge
Suomi
_______________
_______________
____________
________________
_______________
Русский
_________________
Nederlands
Polski
_______________
_______________
________________
_____________
Italiano
Magyar
Türkçe
_____________
Português
________________
Dansk
ꢀꢁꢁꢂꢃꢄꢅꢆ
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
General information
Congratulations!
IMPORTANT
Before using the FM headphone for the
first time, please ensure that the
batteries are fully charged for about
16 hours.This will guarantee a longer
operating lifetime of the batteries.
You have just bought the most
sophisticated FM wireless stereo sound
system.This system uses the latest FM
wireless technology, which gives you
complete freedom of movement while
enjoying your favorite music and movies.
No more inconvenience from cables or
headphone wires!To ensure you get the
best performance from your FM wireless
stereo sound system please read this
manual carefully.
Benefits of Philips latest
RF/FM wireless technology
Wireless transmission
The FM transmitter transmits the stereo
audio signal from your audio or video source
to your FM headphone without wires.
IMPORTANT
Read these instructions.All the safety
and operating instructions should be
read before using the wireless
Wide transmission range
Your FM headphone can receive signals up
to 100 meters away.
headphone system.
High-frequency radio system
The FM headphone set uses a high radio
frequency as the signal carrier, ensuring a
very clear, sharp reception.
Check if the voltage indicated on the
type plate of the adapter corresponds
to the local mains voltage before
connecting to the mains power supply.
Remove the batteries from the
headphone’s battery compartment and
disconnect the adapter from the mains
if the system is not in use for a long
period.
Prevent fire or shock hazard: do not
expose this equipment to humidity,
rain, sand or excessive heat caused by
heating equipment or direct sunlight.
Radio equipment for wireless audio
applications is not protected against
disturbance from other radio services.
Automatic power on/off indicator
The FM transmitter automatically switches
on and starts transmitting when audio
signals are detected at the audio input (red
LED).When no audio signals are detected
the FM transmitter automatically switches
off after a few minutes.
Easy transmission
The FM headphone is able to receive signals
from the transmitter, even through barriers
such as doors, walls and windows.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
General information
Controls
Multiple headphones with one
transmitter
Transmitter (figure 1)
1 Power indicator – lights up when audio
An additional number of headphones
and/or wireless speakers can be used with a
single transmitter if they:
- operate in the 864 MHz band
- can detect a 19 kHz pilot tone.
signals are detected at the audio input.
2 DC power – connect to the 12Volt/
200 mA AC/DC adapter.
3 3.5 mm stereo headphone audio
input – the audio cable connects your FM
transmitter to an audio source.
Please consult the appliance’s electrical
specification sheets for confirmation on
compatibility.
4 Channel switch – select one of
2 channels for best reception.We advise
you to select channel 1 as a first option.
Kit contents
This FM headphone system consists of the
following accessories:
5 Controls plate
Headphone (figure 2)
6 Power On/Off – slide the switch to the
on or off position to switch the headphone
on/off.
1 x SBC HC8332 FM transmitter
1 x SBC HC8305 FM headphone
1 x SBC CS030/00 12Volt / 200mA AC/DC
adapter (for UK: SBC CS030/05 12Volt/
200 mA AC/DC adapter)
7 Battery compartment – open the lid,
take out the batteries and replace them
when empty.
2 x non-rechargeable batteries LR03/AAA
(ZnCl)
8 Volume – adjust volume to your desired
listening level.
1 x 3.5 mm plug to 6.3 mm stereo adapter
plug
9 Tuning – turn the tuning wheel until the
signal is at its clearest.
1 x antenna tube
10 Power indication – lights up when in use.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Transmitter power supply
Headphone power supply
IMPORTANT
IMPORTANT
Use only Philips SBC CS030/00
12 Volt/200 mA AC/DC adapter.
(For UK, use only Philips SBC CS030/05)
Use only rechargeable LR03/AAA
NiMH batteries (preferably Philips).
Do not use NiCd batteries or
alkaline batteries as these may damage
your FM wireless system!
1 Make sure the adapter’s rated voltage
corresponds to the mains socket voltage.
1 Check if the power button of the
2 Connect the DC connector of the AC/DC
adapter to the 12Volt DC power input
connector located at the rear of the
transmitter.
FM headphone is in the on position.
2 Ensure the batteries are put in the battery
compartment correctly according to the
engraved polarity symbols.
3 Connect the 12Volt/200 mA AC/DC
adapter to the mains socket.
– Always remove the batteries if the
headphone is not to be used for a long
period of time.
– Always disconnect the AC/DC adapter if
the transmitter is not to be used for a
long period of time.
4 Insert the antenna tube in the hole, located
on the top of the transmitter. Ensure that
the wire which is hanging out of that hole, is
guided in the antenna tube.
Batteries contain chemical substances,
so they should be disposed of properly.
– Installing the antenna tube correctly, will
improve the transmission range.
Hearing Safety! Continuous use at a high volume may permanently
damage your hearing.
Environmental Information
All redundant packing material has been omitted.We have done our best to make the
packaging easily separable into two materials: cardboard and polyethylene
Your unit consists of materials which can be recycled if disassembled by a specialized
company. Please observe the local regulations regarding the disposal of packing
materials, exhausted batteries and old equipment.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Audio Connections
2 Switch on your audio source and carefully
increase the volume of the audio source.
The red power indication LED of the
transmitter lights up if receiving an audio
signal.
Headphone battery
replacement (figure 3)
IMPORTANT
Use only rechargeable LR03/AAA
NiMH batteries (preferably Philips).
Do not use NiCd batteries or
alkaline batteries as these may damage
your FM wireless system!
3 Switch on the headphone.You may hear a
hissing sound through the headphone if the
headphone is not yet properly tuned to the
transmitter.
1 Open the headphone’s battery
4 To tune, turn the tuning wheel until the
signal is at its clearest and the tuning
indicator will light up.
compartment.
2 Take out the batteries and dispose of them
properly.
5 Adjust the volume to the desired level with
3 Insert new batteries. Only use LR03/AAA
the headphone volume control.
NiMH batteries (preferably Philips).
Basic operation
4 Make sure the batteries are correctly
inserted as indicated by the engraved
symbols in the battery compartment.
When the FM transmitter is connected to a
headphone output of an audio source.
1 Switch on your audio source and carefully
increase the volume of the audio source.
The red power indication LED of the
transmitter lights up if receiving an audio
signal.
5 Close the battery compartment.
IMPORTANT
Before using the FM headphone for the
first time, please ensure that the
batteries are fully charged for about
16 hours.This will guarantee a longer
operating lifetime of the batteries.
2 Switch on the headphone.You may hear a
hissing sound through the headphone if the
headphone is not yet properly tuned to the
transmitter.
Connecting the FM transmitter to a
headphone output of an audio
source (figure 4)
3 To tune, turn the tuning wheel until the
signal is at its clearest and the tuning
indicator will light up.
1 Connect the 3.5mm stereo plug of the
stereo audio cable to the headphone
output of an audio source, such asTV, HiFi
or PC.
4 Adjust the volume to the desired level with
the headphone volume control.
– In case your audio source has a 6.3mm
headphone output, use the supplied
3.5mm to 6.3 mm stereo adapter plug.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or
service centre.
WARNING: Under no circumstances should you try to repair the set yourself, as this
would invalidate the warranty.
Problem
Remedy
No sound
– Check if the AC/DC adapter is fully inserted into the
AC outlet and that its DC connector is properly inserted
into the 12Volt DC input connector located at the rear
of the transmitter.
– Check if the headphone’s on/off switch is in the on
position.
– Headphone batteries running low. Open the
headphone’s battery compartment.Take out the
batteries and replace them with fresh batteries.
(See Headphone power supply)
– Check if the audio source is switched on and tuned to
a channel with audio.
–Volume not adjusted.Adjust the volume on the audio
source/ headphone to a higher level.
– Adjust the headphone’s tuning frequency.Turn the
tuning wheel until the signal is at its clearest.
– Make use of the HC8332 transmitter. Some
transmitters already built into other equipment may not
be compatible with the HC8305 headphone because of
the advanced technologies used in the HC8305
headphone.
Maintenance
– If the headphone will not be used for a long time,
please remove the batteries to prevent leakage and
corrosion.
– Do not leave the headphone near heat sources. Do
not expose to direct sunlight, excessive dust, moisture,
rain or any kind of mechanical shock.
– Do not use alcohol, thinner or petroleum-based
substances to clean the headphone or transmitter. Use a
slightly dampened chamois cloth to clean the housing.
– Do not use cleaning agents containing alcohol, spirits,
ammonia or abrasives as these may harm the housing.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Regulations
System:
Radio Frequency (RF)
Carrier Frequency:
(Transmitter HC8332)
Channel 1: 863.5 MHz
Channel 2: 864.5 MHz
Carrier Frequency:
863.2 to 864.7 MHz (Manual tuning)
(Headphone HC8305)
Modulation:
Frequency Modulation (FM)
<10m Watt
Radiated Output Power:
EffectiveTransmission Range: up to100 meters, omni directional (360º)
Input level:
500 mVrms (1 kHz sine wave)
Power supply – transmitter:
Power supply – headphone:
12Volt / 200 mA DC, centre positive
2 x LR03 (AAA) batteries (NiMH)
Frequency range
(Headphone):
10 – 18,000 Hz
Signal/Noise ratio:
Distortion:
> 60 dB (1 kHz sine wave ,A-weighted)
< 0.5%THD
Channel separation:
> 30 dB
European Regulations
This product has been designed, tested and manufactured according the European
R&TTE Directive 1999/5/EC.
Following this Directive, this product can be brought into service in the following
states:
R&TTE Directive 1999/5/EC
B
✔
DK ✔
E
L
S
✘
GR ✘
NL ✔
UK ✔
F
✔
✔
✔
IRL ✔
I
✘
✔
✔
A
N
P
✔
✔
SU ✔
D
CH ✔
This product complies with class 3 requirements as set down in ETS 300 445.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Meet Philips at the Internet
SBC HC 8300
Printed in China /CMM RM 0125
Download from Www.Somanuals.com. All Manuals Search And Download.
|