239CL2
EN User manual
1
32
43
Customer care and warranty
Troubleshooting & FAQs
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Please use approved power cord provided
by Philips all the time. If your power cord
is missing, please contact with your local
service center. (Please refer to Customer
Care Consumer Information Center.)
1. Important
This electronic user’s guide is intended for
anyone who uses the Philips monitor.Take time
to read this user manual before you use your
monitor. It contains important information and
notes regarding operating your monitor.
•
•
Do not subject the monitor to severe
vibration or high impact conditions during
operation.
The Philips guarantee applies provided the
product is handled properly for its intended use,
in accordance with its operating instructions
and upon presentation of the original invoice
or cash receipt, indicating the date of purchase,
dealer’s name and model and production
number of the product.
Do not knock or drop the monitor during
operation or transportation.
Maintenance
•
To protect your monitor from possible
damage, do not put excessive pressure
on the Monitor panel. When moving your
monitor, grasp the frame to lift; do not lift
the monitor by placing your hand or fingers
on the Monitor panel.
1.1 Safety precautions and mainte-
nance
•
•
Unplug the monitor if you are not going to
use it for an extensive period of time.
Warnings
Use of controls, adjustments or procedures
other than those specified in this documentation
may result in exposure to shock, electrical
hazards and/or mechanical hazards.
Unplug the monitor if you need to clean it
with a slightly damp cloth.The screen may
be wiped with a dry cloth when the power
is off. However, never use organic solvent,
such as, alcohol, or ammonia-based liquids
to clean your monitor.
Read and follow these instructions when
connecting and using your computer monitor.
•
To avoid the risk of shock or permanent
damage to the set, do not expose the
monitor to dust, rain, water, or excessive
moisture environment.
Operation
•
•
Risk of electric shock or fire!
Keep the monitor out of direct sunlight
and away from stoves or any other heat
source.
•
•
If your monitor gets wet, wipe it with dry
cloth as soon as possible.
If foreign substance or water gets in
your monitor, please turn the power off
immediately and disconnect the power
cord.Then, remove the foreign substance
or water, and send it to the maintenance
center.
•
Remove any object that could fall into
ventilation holes or prevent proper cool-
ing of the monitor’s electronics.
•
•
Do not block the ventilation holes on the
cabinet.
When positioning the monitor, make
sure the power plug and outlet are easily
accessible.
•
Do not store or use the monitor in
locations exposed to heat, direct sunlight or
extreme cold.
•
If turning off the monitor by detaching the
power cable or DC power cord, wait for 6
seconds before attaching the power cable
or DC power cord for normal operation.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
In order to maintain the best performance
of your monitor and use it for a longer life-
time, please use the monitor in a location
that falls within the following temperature
and humidity ranges.
Note
Consult a service technician if the monitor
does not operate normally, or you are not sure
what procedure to take when the operating
instructions given in this manual have been
followed.
Temperature: 0-40°C 32-95°F
Humidity: 20-80% RH
IMPORTANT: Always activate a moving
screen saver program when you leave
your monitor unattended. Always activate
a periodic screen refresh application
if your monitor will display unchanging
static content. Uninterrupted display of
still or static images over an extended
period may cause "burn in", also known as
"after-imaging" or "ghost imaging", on your
screen. "Burn-in", "after-imaging", or "ghost
imaging" is a well-known phenomenon in
Monitor panel technology. In most cases,
the "burned in" or "after-imaging" or "ghost
imaging" will disappear gradually over a
period of time after the power has been
switched off.
1.2 Notational Descriptions
The following subsections describe notational
conventions used in this document.
Notes, Cautions and Warnings
Throughout this guide, blocks of text may be
accompanied by an icon and printed in bold or
italic type.These blocks contain notes, cautions
or warnings.They are used as follows:
Note
This icon indicates important information and
tips that help you make better use of your
computer system.
Caution
Warning
This icon indicates information that tells you
how to avoid either potential damage to
hardware or loss of data.
Severe” burn-in” or “after-image” or “ghost
image” symptoms will not disappear and cannot
be repaired.The damage mentioned above is
not covered under your warranty.
Warning
This icon indicates the potential for bodily harm
and tells you how to avoid the problem.
Service
•
The casing cover should be opened only
by qualified service personnel.
Some warnings may appear in alternate formats
and may not be accompanied by an icon. In such
cases, the specific presentation of the warning is
mandated by the relevant regulatory authority.
•
If there is any need for any document for
repair or integration, please contact with
your local service center. (please refer to
the chapter of "Consumer Information
Center")
•
•
For transportation information, please refer
to "Technical Specifications".
Do not leave your monitor in a car/trunk
under direct sun light.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Recycling Information for Customers
1.3 Disposal of product and packing
material
There is currently a system of recycling up and
running in the European countries, such asThe
Netherlands, Belgium, Norway, Sweden and
Denmark.
Waste Electrical and Electronic Equipment -
WEEE
In Asia Pacific,Taiwan, the products can be taken
back by Environment Protection Administration
(EPA) to follow the IT product recycling
management process, detail can be found in
The monitor contains parts that could cause
damage to the nature environment.Therefore, it
is vital that the monitor is recycled at the end of
its life cycle.
This marking on the product or on its
packaging illustrates that, under European
Directive 2002/96/EC governing used electrical
and electronic appliances, this product may
not be disposed of with normal household
waste.You are responsible for disposal of
this equipment through a designated waste
electrical and electronic equipment collection.
To determine the locations for dropping off
such waste electrical and electronic, contact
your local government office, the waste disposal
organization that serves your household or the
store at which you purchased the product.
For help and service, please contact Consumers
Information Center or F1rst Choice Contact
Information Center in each country.
Your new monitor contains materials that can
be recycled and reused. Specialized companies
can recycle your product to increase the
amount of reusable materials and to minimize
the amount to be disposed of.
All redundant packing material has been
omitted.We have done our utmost to make the
packaging easily separable into mono materials.
Please find out about the local regulations on
how to dispose of your old monitor and packing
from your sales representative.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
2. Setting up the monitor
1. Place the monitor face down on a smooth
surface. Pay attention to avoid scratching or
damaging the screen..
2.1 Installation
Package contents
239CL2
क्विक स्टार्ट गाइड
स्थापना
Connexion
Подключение जोड़ें
अर्गोनोमिक एडजस्ट करें
Monitor
Quick start guide
2. Hold the monitor and base with both
hands. Gently bend the base vertically
down to a fixed angle.
Monitor
Quick Setup Guide
SmartControl software
Monitor drivers
a
f
i
o
EDFU CD
VGA signal cable (optional)
DVI-D cable (optional)
AC/DC Adapter
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to your PC
2.2 Operating the monitor
DC power input
VGA input
Front view product description
DVI-D input (Available for selected models)
To access OSD menu
/OK.
Connect to PC
To use theTurbo function
/Return to previous OSD level.
1. Turn off your computer and unplug its
power cord.
2. Connect the VGA or DVI signal cable for
video connection.
To switch monitor's power on
and off.
3. Connect the DC power input to your
monitor.
To change the signal input source
/To adjust the OSD menu.
4. Plug the power cord of the AC/DC adapter
into a nearby AC power outlet.
SmartImage.There are 6 modes
to be selected: Office, Photo,
Movie, Game, Economy, Off
/To adjust the OSD menu.
5. Turn on your computer and monitor. If the
monitor displays images, the installation is
done.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the On Screen Display
What is On-Screen Display (OSD)?
The OSD Menu
Below is an overall view of the structure of
the On-Screen Display.You can use this as a
reference when you want to work your way
around the different adjustments later on.
On-Screen Display (OSD) is a feature in all
Philips Monitors. It allows an end user to adjust
screen performance or select functions of
the monitors directly through an on-screen
instruction window.A user friendly on screen
display interface is shown as below:
Main menu
Sub menu
Auto
VGA
DVI
Input
Monitor Setup
Input
Input
VGA
DVI
Wide screen, 4:3
0~100
Picture Format
Picture
Brightness
Contrast
0~100
Picture
SmartResponse
SmartContrast
Gamma
On, Off
Audio
On, Off
Color
1.8, 2.0, 2.2, 2.4, 2.6
Language
OSD Settings
Setup
Color Temperature
5000K, 6500K, 7500K, 8200K,
9300K, 11500K
Color
sRGB
Red: 0~100
User Define
Back
OK
Green: 0~100
Blue: 0~100
Basic and simple instruction on the control
keys
Language
English Español, Français, Deutsch, Italiano,
簡体中文,
Português, Русский
Türkçe
In the OSD shown above, users can press
buttons at the front bezel of the monitor to
move the cursor, or press OK to confirm the
choice or adjustment.
0~100
0~100
Horizontal
Vertical
OSD Settings
Off, 1, 2, 3, 4
Transparency
5, 10, 20, 30, 60
OSD Time out
0, 1, 2, 3, 4
Power LED
H. Position
V. Position
Setup
0~100
0~100
Phase
0~100
0~100
Clock
Resolution Notification
On, Off
Yes, No
Reset
Information
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Resolution notification
This monitor is designed for optimal
performance at its native resolution, 1920 x
1080 at 60 Hz.When the monitor is powered
on at a different resolution, an alert is displayed
on screen: Use 1920 x 1080 at 60 Hz for best
results.
Display of the native resolution alert can be
switched off from Setup in the OSD (On
Screen Display) menu.
Physical Function
Tilt
14
-3
7
Download from Www.Somanuals.com. All Manuals Search And Download.
4. When SmartImage is enabled, the sRGB
scheme is disabled automatically.To use
sRGB, you need to disable SmartImage
3. Product information
with the
your monitor.
Except using
button at the front bezel of
3.1 SmartImage
key to scroll down, you can also
What is it?
press
buttons to choose and press “OK”
SmartImage provides presets that optimize
display for different types of content, dynamically
adjusting brightness, contrast, color and
to confirm selection and close the SmartImage
OSD.
sharpness in real time.Whether you're working
with text applications, displaying images or
watching a video, Philips SmartImage delivers
great optimized monitor performance.
There are six modes to select: Office, Photo,
Movie, Game, Economy and Off.
Why do I need it?
You want a monitor that delivers optimized
display all your favorite types of content,
SmartImage software dynamically adjust
brightness, contrast, color and sharpness in
real time to enhance your monitor viewing
experience.
How does it work?
•
Office: Enhances text and dampens
brightness to increase readability and
reduce eye strain.This mode significantly
enhances readability and productivity when
you’re working with spreadsheets, PDF files,
scanned articles or other general office
applications.
SmartImage is an exclusive, leading edge Philips
technology that analyzes the content displayed
on your screen. Based on a scenario you select,
SmartImage dynamically enhances the contrast,
color saturation and sharpness of images to
enhance the contents being displayed - all in
real time with the press of a single button.
•
•
Photo: This profile combines color
saturation, dynamic contrast and sharpness
enhancement to display photos and other
images with outstanding clarity in vibrant
colors - all without artifacts and faded
colors.
How to enable SmartImage?
Movie: Ramped up luminance, deepened
color saturation, dynamic contrast and
razor sharpness displays every details in
darker areas of your videos without color
washout in brighter areas maintaining a
dynamic natural values for the ultimate
video display.
1. Press
screen display.
2. Keep pressing
to launch the SmartImage on
to toggle between Office,
Photo, Movie, Game, Economy and Off.
3. The SmartImage on screen display will
remain on screen for 5 seconds, or you can
also press "OK" to make confirmation.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Game: Turn on over drive circuit for best
response time, reduce jaggy edges for fast
moving objects on screen, enhance contrast
ratio for bright and dark scheme, this
profile delivers the best gaming experience
for gamers.
3.3 Philips SmartControl Premium
The new SmartControl Premium software
by Phillips allows you to control your monitor
via an easy to use on-screen graphic interface.
Complicated adjustments are a thing of the
past as this user friendly software guides you
through fine-tuning resolution, Color calibration,
Clock/Phase adjustments, RGB White point
adjustment, etc.
•
•
Economy: Under this profile, brightness,
contrast are adjusted and backlighting
finetuned for just right display of everyday
office applications and lower power
consumption.
Equipped with latest technology in core
algorithm for fast processing and response, this
Windows 7 compliant eye catching animated
Icon based software is ready to enhance your
experience with Philips monitors!
Off: No optimization by SmartImage.
3.2 SmartContrast
What is it?
Installation
Unique technology that dynamically analyzes
displayed content and automatically optimizes
a Monitor's contrast ratio for maximum visual
clarity and viewing enjoyment, stepping up
backlighting for clearer, crisper and brighter
images or dimming backlighting for clear display
of images on dark backgrounds.
•
•
•
Follow the instruction and complete the
installation.
You can launch after installation is
completed.
If you want to launch later, you can either
click the shortcut on desktop or toolbar.
Why do I need it?
You want the very best visual clarity and
viewing comfort for every type of content.
SmartContrast dynamically controls contrast
and adjusts backlighting for clear, crisp, bright
gaming and video images or displays clear,
readable text for office work. By reducing your
monitor's power consumption, you save on
energy costs and extend the lifetime of your
monitor.
How does it work?
When you activate SmartContrast, it will analyse
the content you are displaying in real time to
adjust colors and control backlight intensity.This
function will dynamically enhance contrast for a
great entertainment experience when viewing
videos or playing games.
First launch -Wizard
•
•
•
The first time after installation of Smart-
Control Premium, it will automatically go
to Wizard for first time launch.
The wizard will guide you through adjust-
ment your monitor performance step by
step.
You can go to Plug-in menu to launch
wizard later on as well.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
•
You can adjust more options without
wizard by Standard pane.
Start with Standard pane:
Adjust menu:
•
Adjust Menu allow you to adjust Bright-
ness, Contrast, Focus, Position and Reso-
lution.
•
•
You can follow the instruction and do the
adjustment.
Cancel prompts user if you want to cancel
installation.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Color menu:
•
Color Menu allow you to adjust RGB,
Black Level, White Point, Color Calibra-
tion, and SmartImage (Please refer to
SmartImage section).
•
•
•
You can follow the instruction and do the
adjustment.
Refer to below table for sub-menu item
base on your input.
Example for Color Calibration
11
Download from Www.Somanuals.com. All Manuals Search And Download.
1. "Show Me" starts color calibration tutorial.
SmartImage
Allows user to change setting for better display
setting based on content.
2. Start - starts the 6-step color calibration
sequence.
3. Quick View loads the before/after images.
When Entertainment is set, SmartContrast and
SmartResponse are enabled.
4. To return to Color home pane, click the
Cancel button.
5. Enable color calibration - by default is on.
If unchecked, does not allow for color
calibration to happen, dimes out start and
quick view buttons.
6. Must have patent info in calibration screen.
First color Calibration Screen:
ECO
•
•
Previous button is disabled until the sec-
ond color screen.
Next goes to the succeeding target
(6-targets).
•
•
Final next goes File>Presets pane.
Cancel closes the UI and returns to the
plug in page.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Theft Deterrence Pane will only be active when
selectingTheft Deterrence Mode from the
drop-down Plug Ins menu.
After creating PIN, theTheft Deterrence pane
will indicateTheft Deterrence Enabled and
provide PIN Options button:
To enableTheft Deterrence, clicking Enable
Theft Deterrence Mode button brings up the
following screen:
•
•
Theft Deterrence Enabled is displayed.
Disable Theft Deterrence Mode opens
pane screen on next page.
•
•
User can enter PIN between 4 and 9 digits
numbers only.
•
PIN Options button only available after
user creates PIN, button opens secure
PIN web site.
After entering PIN, Accept button takes
user to the pop-up dialog box on the fol-
lowing page.
Options>Preferences - Will only be active
when selecting Preferences from the drop-
down Options menu. On a non-supported
display capable of DDC/CI, only the Help and
Options tabs are available.
•
•
Minimum minutes set to 5. Slider set to 5
by default.
Does not require the display be attached
to a different host to go into Theft Deter-
rence mode.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Displays current preference settings.
Options>Input - Will only be active when
selecting Input from the drop-down Options
menu. On a non-supported display capable of
DDC/CI, only the Help and Options tabs are
available.All other SmartControl Premium tabs
are not available.
A checked box enables the feature. The
check box is a toggle.
•
Enable Context Menu on desktop is
checked (On) by default. Enable Context
menu displays SmartControl Premium se-
lections for Select Preset and Tune Display
in the desktop right-click context menu.
Disabled removes SmartControl Premium
from the right click context menu.
•
Enable Task Tray icon is checked (On)
by default. Enable context menu shows
the task tray menu for SmartControl
Premium. A right click on the task tray
icon displays the menu options for Help,
Technical Support. Check for Upgrade,
About, and Exit. When Enable task tray
menu is disabled, the task tray icon will
only display EXIT.
•
•
Run at Startup is checked (On) by default.
When disabled, SmartControl Premium
will not launch at start or be in the task
tray. The only way to launch SmartControl
Premium is either from the desktop short
cut or from the program file. Any preset
set to run at startup will not load when
this box is unchecked (Disabled).
•
•
Display the Source instruction pane and
current input source setting.
On single input displays, this pane will not
be visible.
Enable transparency mode (Windows 7,
Vista, XP). Default is 0% Opaque.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Options>Audio - Will only be active when
selectingVolume from the drop-down Options
menu.
Help>User Manual - Will only be active when
selecting User Manual from the drop-down
Help menu. On a non-supported display
capable of DDC/CI, only the Help and Options
tabs are available.
On a non-supported display capable of DDC/
CI, only the Help and Options tabs are available.
Help>Version - Will only be active when
selectingVersion from the drop- down Help
menu. On a non-supported display capable of
DDC/CI, only the Help and Options tabs are
available.
Option>Auto Pivot
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Context Sensitive menu
•
•
Technical Support - displays the tech sup-
port page.
The Context Sensitive menu is Enabled by
default. If Enable Context Menu has been
checked in the Options>Preferences pane, then
the menu will be visible.
Check for Update - takes the user to PDI
Landing and checks the user’s version
against the most current available.
•
•
About - Displays detailed reference infor-
mation: product version, release informa-
tion, and product name.
Exit - Close SmartControl Premium
To run SmartControl Premium again
either select SmartControl Premium from
Program menu, double-click the desktop
PC icon or restart the system.
The Context Menu has four entries:
•
•
SmartControl Premium - When selected
the About Screen is displayed.
Select Preset - Provides a hierarchical
menu of saved presets for immediate
use. A check mark shows the currently
selected preset. Facoty Preset can also be
called from the drop down menu.
•
•
Tune Display - Opens the SmartControl
Premium control panel.
SmartImage - Check current settings, Of-
fice, Photo, Movie, Game, Economy, Off.
Task Tray Menu Disabled
When theTaskTray is disabled in the preference
folder, only the EXIT selection is available.To
completely remove SmartControl Premium
from the task tray, disable Run at Startup in
Options>Preferences.
Task Tray Menu Enabled
The task tray menu can be displayed by right-
clicking on the SmartControl Premium icon
from the task tray. Left Click will launch the
application.
The task tray has five entries:
•
Help - Access to User Manual file: Open
User Manual file using the default browser
window.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Drag and Drop Windows
3.4 SmartDesktop Guide
Once the partitions are configured and Align to
partition is selected a window can be dragged
into the region and it will automatically align.
When the window and mouse cursor are within
the region, the region will become highlighted.
SmartDesktop
SmartDesktop is in SmartControl Premium.
Install SmartControl Premium and select
SmartDesktop from Options.
Note
If the outline of the region is not visible when
dragging the window,“Show windows contents
while dragging” is disabled. To enable:
1. In Control Panel, click System.
2. Click Advanced system settings (For Vista
& Win7 OS, this is located on the left
sidebar)
3. In Performance section, click Settings.
4. In the box, check Show window contents
while dragging, and click OK.
Other alternative path:
Vista:
Control Panel > Personalization > Window
Color and Appearance > Click "Open Classic
appearance properties for more color options"
> Click "Effects" button > check Show window
contents while dragging
•
•
Align to partition check box will enable
automatic alignment for the window when
dragged into the defined partition.
Select the desired partition by clicking on
the icon. The partition will be applied to
the desktop and the icon will be high-
lighted.
XP:
Display Properties>Appearance>Effects...>
check Show window contents while dragging
•
Identify provides a quick way to view the
grid.
Win 7:
No other alternative path available.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Title Bar Options
3. Identify Partition – Displays the outline
grid on the desktop for the current
partition.
Desktop partition can be accessed from the title
bar of the active window. This provides a quick
and easy way to manage the desktop as well as
sending any window to any partition without
having to drag and drop. Move the cursor into
the active window’s title bar to access the drop
down menu.
4. Align On/Align Off – Enables/disables the
drag and drop auto align feature.
5. Exit – Closes Desktop Partition and
Display Tune. To re-initialize, launch Display
Tune from the start menu or short cut on
the desktop.
Left Click Menu
Left click on the Desktop Partition icon to
quickly send the active window to any partition
without having to drag and drop. Releasing the
mouse will send the window to the highlighted
partition.
Right Click Menu
Right click on the Desktop Partition icon to
view the drop down menu.
1. Find Windows – In some cases, the user
may have sent multiple windows to the
same partition. Find Window will show
all open windows and move the selected
window to the forefront.
Task Tray Right Click
The task tray also contains most of the features
supported in the title bar (with the exception
of automatically sending a window to any
partition).
2. Desktop Partition – Desktop Partition
shows the current selected partition and
allows the user to quickly change to any of
the partitions shown in the drop down.
Note
If more than one display is attached, the user
can select the targeted display to change the
partition. The highlighted icon represents the
current active partition.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Find Windows – In some cases, the user
may have sent multiple windows to the
same partition. Find Window will show
all open windows and move the selected
window to the forefront.
Desktop Partition – Desktop Partition
shows the current selected partition and
allows the user to quickly change to any of
the partitions shown in the drop down.
•
•
Identify Partition – Displays the outline
grid on the desktop for the current parti-
tion.
Align On/Align Off – Enables/disables the
drag and drop auto align feature.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
SmartDesktop Partition Definitions
Name
Description
Image
Full Desktop
Vertical
Applies all settings to the entire desktop.
Assesses the screen resolution and divides the display
into two evenly sized vertical regions.
For 90/270 maintain vertical configuration.
Horizontal
VerticalTriple
Assesses the screen resolution and divides the display
into two evenly sized horizontal regions.
For 90/270 maintain horizontal configuration.
Assesses the screen resolution and divides the display
into three evenly sized vertical regions.
For 90 Partition 1 horizontal top Partition 2 horizontal
center Partition 3 horizontal bottom.
For 270 Partition 3 horizontal top Partition 2 horizontal
center Partition 1 horizontal bottom.
Vertical Split Left
Assesses the screen resolution and divides the display into
two vertical regions, the left hand side is a single region,
the right hand side is split into two evenly sized regions
For 90 Partition 1 on top Partition 2&3 on bottomFor
270 Partition 1 on bottom Partition 2&3 on top.
Vertical Split Right
Assesses the screen resolution and divides the display
into two vertical regions, the right hand side is a single
region, the left hand side is split into two evenly sized
regions
For 90 Partition 1&2 on top Partition 3 on bottom.
For 270 Partition 3 on top Partition 1&2 on bottom.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Name
Description
Image
Horizontal SplitTop
Assesses the screen resolution and divides the display
into two evenly sized horizontal regions, the top region
is single, the bottom region is spilt into two evenly sized
regions
For 90 Partition 1 on right sideVertical Partition 2&3 on
left sideVertical.
For 270 Partition 1 on left sideVertical Partition 2&3 on
right sideVertical.
Horizontal Split
Bottom
Assesses the screen resolution and divides the display into
two evenly sized horizontal regions, the bottom region is
single, the top region is spilt into two evenly sized regions
For 90 Partition 1&2 on right sideVertical Partition 3 on
left sideVertical.
For 270 Partition 1&2 on left sideVertical Partition 3 on
right sideVertical.
Even Split
Assesses the screen resolution and divides the display
into four evenly sized regions.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Types of Pixel Defects
3.5 Philips' Flat Panel Monitors Pixel
Defect Policy
Pixel and sub pixel defects appear on the screen
in different ways.There are two categories of
pixel defects and several types of sub pixel
defects within each category.
Philips strives to deliver the highest quality
products.We use some of the industry's most
advanced manufacturing processes and practice
stringent quality control. However, pixel or
sub pixel defects on theTFT Monitor panels
used in flat panel monitors are sometimes
unavoidable. No manufacturer can guarantee
that all panels will be free from pixel defects,
but Philips guarantees that any monitor with
an unacceptable number of defects will be
repaired or replaced under warranty.This notice
explains the different types of pixel defects and
defines acceptable defect levels for each type.
In order to qualify for repair or replacement
under warranty, the number of pixel defects
on aTFT Monitor panel must exceed these
acceptable levels. For example, no more than
0.0004% of the sub pixels on a 23" XGA
monitor may be defective. Furthermore, Philips
sets even higher quality standards for certain
types or combinations of pixel defects that are
more noticeable than others.This policy is valid
worldwide.
Bright Dot Defects
Bright dot defects appear as pixels or sub pixels
that are always lit or 'on'.That is, a bright dot is
a sub-pixel that stands out on the screen when
the monitor displays a dark pattern.There are
the types of bright dot defects:
One lit red, green or blue sub pixel
Two adjacent lit sub pixels:
-
-
Red + Blue = Purple
Red + Green =Yellow
-
Green + Blue = Cyan (Light Blue)
Pixels and Sub pixels
A pixel, or picture element, is composed of
three sub pixels in the primary colors of red,
green and blue. Many pixels together form an
image.When all sub pixels of a pixel are lit, the
three colored sub pixels together appear as a
single white pixel.When all are dark, the three
colored sub pixels together appear as a single
black pixel. Other combinations of lit and dark
sub pixels appear as single pixels of other colors.
Three adjacent lit sub pixels (one white pixel)
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Proximity of Pixel Defects
Note
A red or blue bright dot must be more
Because pixel and sub pixels defects of the
same type that are near to one another may be
more noticeable, Philips also specifies tolerances
for the proximity of pixel defects.
than 50
percent brighter than neighboring dots while
a green bright dot is 30 percent brighter than
neighboring dots.
Black Dot Defects
Black dot defects appear as pixels or sub pixels
that are always dark or 'off'.That is, a dark dot is
a sub-pixel that stands out on the screen when
the monitor displays a light pattern.These are
the types of black dot defects:
Pixel Defect Tolerances
In order to qualify for repair or replacement
due to pixel defects during the warranty period,
aTFT Monitor panel in a Philips flat panel
monitor must have pixel or sub pixel defects
exceeding the tolerances listed in the following
tables.
BRIGHT DOT DEFECTS
MODEL
ACCEPTABLE LEVEL
239CL2
1 lit subpixel
3
2 adjacent lit subpixels
1
3 adjacent lit subpixels (one white pixel)
Distance between two bright dot defects*
Total bright dot defects of all types
0
>15mm
3
BLACK DOT DEFECTS
MODEL
ACCEPTABLE LEVEL
239CL2
1 dark subpixel
5 or fewer
2 or fewer
0
2 adjacent dark subpixels
3 adjacent dark subpixels
Distance between two black dot defects*
Total black dot defects of all types
>15mm
5 or fewer
TOTAL DOT DEFECTS
MODEL
ACCEPTABLE LEVEL
239CL2
Total bright or black dot defects of all types
5 or fewer
Note
1 or 2 adjacent sub pixel defects = 1 dot defect
This monitor is ISO9241-307 compliant.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Technical Specifications
Picture/Display
Monitor panel type
Backlight
TFT-LCD
LED
Panel size
23" W (58.42 cm)
16:9
Aspect ratio
Pixel Pitch
0.0883 x 0.265 mm
250 cd/m²
Brightness
SmartContrast
Contrast ratio (typ.)
Response time (typical)
Optimum Resolution
Viewing angle
Picture Enhancement
Display colors
Vertical refresh rate
Horizontal Frequency
sRGB
20,000,000:1
1000:1
2 ms
1920x1080 @ 60Hz
176° (H) / 170° (V) @ C/R > 5
SmartImage
16.7 M
56Hz -76Hz
30kHz - 80kHz
YES
Connectivity
Signal input
DVI (digital),VGA (signal)
Input Signal
Separate Sync, Sync on Green
Convenience
User Convenience
OSD Languages
English, French, German, Italian, Russian, Spanish, Simplified
Chinese, Portuguese,Turkish
Plug & Play Compatibility
DDC/CI, sRGB,Windows 7/Vista/XP, Mac OSX, Linux
Stand
Tilt
-3 / +14
Power
On mode
< 30W (typ.)
Energy Consumption
(EnergyStar 5.0 test method)
AC InputVoltage at AC InputVoltage at AC InputVoltage at
100VAC +/-5VAC, 115VAC +/-5VAC, 230VAC +/-5VAC,
50Hz +/-3Hz
23.88W
0.28W
60Hz +/-3Hz
23.78W
0.28W
50Hz +/-3Hz
23.79W
0.30W
Normal Operation (typcial)
Sleep
Off
0.21W
0.21W
0.23W
Heat Dissipation*
AC InputVoltage at AC InputVoltage at AC InputVoltage at
100VAC +/-5VAC, 115VAC +/-5VAC, 230VAC +/-5VAC,
50Hz +/-3Hz
81.50 BTU/hr
0.956 BTU/hr
0.717 BTU/hr
60Hz +/-3Hz
81.16 BTU/hr
0.956 BTU/hr
0.717 BTU/hr
50Hz +/-3Hz
81.19 BTU/hr
1.024 BTU/hr
0.785 BTU/hr
Normal Operation
Sleep
Off
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Power LED indicator
Power Supply
On mode: Blue, Standby/Sleep mode: Blue (blinking)
AC/DC Adapter, 12V==3.0A
Dimension
Product with stand (WxHxD)
Product without stand
(WxHxD)
547 x 408 x 175 mm
547 x 326 x 129 mm
Box dimension (WxHxD)
Weight
599 x 553 x 125 mm
Product with stand
Product with packaging
Operating Condition
Temperature range (operation)
Temperature range (Non-
operation)
2.56 kg
4.78 kg
0°C to 40 °C
-20°C to 60°C
Relative humidity
20% to 80%
Altitude
Operation: + 12,000 ft ( 3,658 m)
Non-operation: + 40,000 ft ( 12,192 m)
30,000hrs
MTBF
Environmental
ROHS
YES
EPEAT
Silver (www.epeat.net)
100% recyclable
Packaging
Compliance and standards
Regulatory Approvals
Cabinet
CE Mark, FCC Class B, SEMKO, UL/cUL, Energy Star 5.0,
Color
Black/Black
Finish
Glossy/Glossy
Note
This data is subject to change without notice.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
4.1 Resolution & Preset Modes
4.2 Automatic PowerSaving
If you haveVESA DPM compliance display card
or software installed in your PC, the monitor
can automatically reduce its power consumption
when not in use. If an input from a keyboard,
mouse or other input device is detected,
the monitor will 'wake up' automatically.The
following table shows the power consumption
and signaling of this automatic power saving
feature:
Maximum Resolution
1920 x 1080 at 60 Hz (analog input)
1920 x 1080 at 60 Hz (digital input)
Recommended Resolution
1920 x 1080 at 60 Hz (digital input)
H. freq (kHz) Resolution
V. freq (Hz)
31.47
31.47
35.00
37.86
37.50
37.88
46.88
48.36
60.02
63.89
79.98
55.94
70.64
65.29
67.50
720x400
640x480
70.09
59.94
66.67
72.81
75.00
60.32
75.00
60.00
75.03
60.02
75.03
59.89
74.98
59.95
60.00
Power Management Definition
640x480
LED
VESA Mode Video H-sync V-sync Power Used
color
640x480
Active
Sleep
ON
OFF
OFF
Yes
No
-
Yes
No
-
< 30 W (typ.)
< 0.3 W (typ.)
< 0.3 W (typ.)
Blue
640x480
Blue
(blinking)
800x600
Switch Off
OFF
800x600
The following setup is used to measure power
consumption on this monitor.
1024x768
1024x768
1280x1024
1280x1024
1440x900
1440x900
1680x1050
1920x1080
•
•
•
•
Native resolution: 1920 x 1080
Contrast: 50%
Brightness: 250 nits
Color temperature: 6500k with full white
pattern
•
Audio (Off)
Note
This data is subject to change without notice.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
CE Declaration of Conformity
5. Regulatory Information
This product is in conformity with the following
standards
Lead-free Product
•
•
EN60950-1:2006 (Safety requirement of
Information Technology Equipment)
Lead free display promotes
environmentally sound recovery
and disposal of waste from electrical
and electronic equipment.Toxic
EN55022:2006 (Radio Disturbance
requirement of Information Technology
Equipment)
substances like Lead has been eliminated
and compliance with European community’s
stringent RoHs directive mandating restrictions
on hazardous substances in electrical and
electronic equipment have been adhered to
in order to make Philips monitors safe to use
throughout its life cycle.
•
EN55024:1998+A1:2001+A2:2003
(Immunity requirement of Information
Technology Equipment)
•
•
EN61000-3-2:2006 (Limits for Harmonic
Current Emission)
EN61000-3-3:1995+A1:2001+A2:2005
(Limitation of Voltage Fluctuation and
Flicker) following provisions of directives
applicable
EPEAT
(www.epeat.net)
“The EPEAT (Electronic Product
Environmental AssessmentTool)
program evaluates computer
•
•
•
2006/95/EC (Low Voltage Directive)
2004/108/EC (EMC Directive)
desktops, laptops, and monitors
2005/32/EC (EuP Directive, EC No.
1275/2008 mplementing Directive
for Standby and Off mode power
consumption) and is produced by a
manufacturing organization on ISO9000
level.
based on 51 environmental criteria developed
through an extensive stakeholder consensus
process supported by US EPA.
EPEAT system helps purchasers in the public
and private sectors evaluate, compare and
select desktop computers, notebooks and
monitors based on their environmental
attributes. EPEAT also provides a clear and
consistent set of performance criteria for the
design of products, and provides an opportunity
for manufacturers to secure market recognition
for efforts to reduce the environmental impact
of its products.”
The product also comply with the following
standards
•
ISO9241-307:2008 (Ergonomic
requirement, Analysis and compliance test
methods for electronic visual displays)
•
•
GS EK1-2000:2009 (GS mark requirement)
prEN50279:1998 (Low Frequency Electric
and Magnetic fields for Visual Display)
Benefits of EPEAT
Reduce use of primary materials
Reduce use of toxic materials
•
•
MPR-II (MPR:1990:8/1990:10 Low
Frequency Electric and Magnetic fields)
TCO Displays 5.0 (Requirement for
Environment Labeling of Ergonomics,
Energy, Ecology and Emission,TCO: Swedish
Confederation of Professional Employees)
for TCO versions
Avoid the disposal of hazardous waste EPEAT’S
requirement that all registered products meet
ENERGY STAR’s energy efficiency specifications,
means that these products will consume less
energy throughout their life.
This monitor is equipped with a function for
saving energy which supports theVESA Display
Power Management (DPM) standard.This
27
Download from Www.Somanuals.com. All Manuals Search And Download.
means that the monitor must be connected to
a computer which supportsVESA DPM.Time
settings are adjusted from the system unit by
software.
•
•
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
VESA State LED Indicator Power Consumption
Normal
operation
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's authority
to operate the equipment.
ON (Active)
Blue
< 30 W (typ.)
Power Saving
Alternative 2
One step
Sleep
Blue (blinking)
OFF
< 0.3 W (typ.)
< 0.3 W (typ.)
Switch Off
Use only RF shielded cable that was supplied
with the monitor when connecting this monitor
to a computer device.
®
As an ENERGY STAR Partner, we
have determined that this product
®
meets the ENERGY STAR
guidelines for energy efficiency.
To prevent damage which may result in fire or
shock hazard, do not expose this appliance to
rain or excessive moisture.
Note
We recommend you switch off the monitor
when it is not in use for a long time.
THIS CLASS B DIGITAL APPARATUS MEETS
ALL REQUIREMENTS OFTHE CANADIAN
INTERFERENCE-CAUSING EQUIPMENT
REGULATIONS.
Federal Communications Commission (FCC)
Notice (U.S. Only)
FCC Declaration of Conformity
This equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of the
FCC Rules.These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation.This equipment generates, uses
and can radiate radio frequency energy
and, if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct
the interference by one or more of the
following measures:
Declaration of Conformity for Products Marked
with FCC Logo,
United States Only
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Commission Federale de la Communication
(FCC Declaration)
EN 55022 Compliance (Czech Republic Only)
Cet équipement a été testé et déclaré
conforme auxlimites des appareils
numériques de class B,aux termes de
l'article 15 Des règles de la FCC. Ces
limites sont conçues de façon à fourir
une protection raisonnable contre les
interférences nuisibles dans le cadre d'une
installation résidentielle.
Polish Center for Testing and Certification
Notice
CET appareil produit, utilise et peut
émettre des hyperfréquences qui, si
l'appareil n'est pas installé et utilisé selon
les consignes données, peuvent causer des
interférences nuisibles aux communications
radio.
The equipment should draw power from a
socket with an attached protection circuit (a
three-prong socket).All equipment that works
together (computer, monitor, printer, and so on)
should have the same power supply source.
The phasing conductor of the room's electrical
installation should have a reserve short-circuit
protection device in the form of a fuse with a
nominal value no larger than 16 amperes (A).
Cependant, rien ne peut garantir l'absence
d'interférences dans le cadre d'une
installation particulière. Si cet appareil est
la cause d'interférences nuisibles pour
la réception des signaux de radio ou de
télévision, ce qui peut être décelé en
fermant l'équipement, puis en le remettant
en fonction, l'utilisateur pourrait essayer de
corriger la situation en prenant les mesures
suivantes:
To completely switch off the equipment, the
power supply cable must be removed from the
power supply socket, which should be located
near the equipment and easily accessible.
A protection mark "B" confirms that the
equipment is in compliance with the protection
usage requirements of standards PN-93/T-42107
and PN-89/E-06251.
•
•
•
•
Réorienter ou déplacer l'antenne de
réception.
Augmenter la distance entre l'équipement
et le récepteur.
Brancher l'équipement sur un autre circuit
que celui utilisé par le récepteur.
Demander l'aide du marchand ou d'un
technicien chevronné en radio/télévision.
Toutes modifications n'ayant pas reçu
l'approbation des services compétents
en matière de conformité est susceptible
d'interdire à l'utilisateur l'usage du présent
équipement.
N'utiliser que des câbles RF armés pour
les connections avec des ordinateurs ou
périphériques.
CET APPAREIL NUMERIQUE DE LA CLASSE
B RESPECTETOUTES LES EXIGENCES DU
REGLEMENT SUR LE MATERIEL BROUILLEUR
DU CANADA.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
North Europe (Nordic Countries) Information
3. bei Ersatz der Bildröhre nur eine
bauartgleiche eingebaut wird.
Placering/Ventilation
VARNING:
Aus ergonomischen Gründen wird empfohlen,
die Grundfarben Blau und Rot nicht auf
dunklem Untergrund zu verwenden (schlechte
Lesbarkeit und erhöhte Augenbelastung bei zu
geringem Zeichenkontrast wären die Folge).
Der arbeitsplatzbezogene Schalldruckpegel
nach DIN 45 635 beträgt 70dB (A) oder
weniger.
FÖRSÄKRA DIG OM ATT HUVUDBRYTARE
OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR
DU STÄLLER DIN UTRUSTNING PÅPLATS.
Placering/Ventilation
ADVARSEL:
SØRG VED PLACERINGEN FOR, AT
NETLEDNINGENS STIK OG STIKKONTAKT
ER NEMTTILGÆNGELIGE.
ACHTUNG: BEIM AUFSTELLEN
DIESES GERÄTES DARAUF
Paikka/Ilmankierto
VAROITUS:
ACHTEN, DAß NETZSTECKER UND
NETZKABELANSCHLUß LEICHT
ZUGÄNGLICH SIND.
SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO
VOIDAAN TARVITTAESSA HELPOSTI
IRROTTAA PISTORASIASTA.
Plassering/Ventilasjon
ADVARSEL:
China RoHS
The People's Republic of China released a
regulation called "Management Methods for
Controlling Pollution by Electronic Information
Products" or commonly referred to as China
RoHS. All products including CRT and Monitor
which are produced and sold for China market
have to meet China RoHS request.
NÅR DETTE UTSTYRET PLASSERES, MÅ
DU PASSE PÅ AT KONTAKTENE FOR
STØMTILFØRSEL ER LETTE Å NÅ.
BSMI Notice (Taiwan Only)
Ergonomie Hinweis (nur Deutschland)
Der von uns gelieferte Farbmonitor entspricht
den in der "Verordnung über den Schutz vor
Schäden durch Röntgenstrahlen" festgelegten
Vorschriften.
Auf der Rückwand des Gerätes befindet sich
ein Aufkleber, der auf die Unbedenklichkeit der
Inbetriebnahme hinweist, da dieVorschriften
über die Bauart von Störstrahlern nach Anlage
III ¤ 5 Abs. 4 der Röntgenverordnung erfüllt sind.
Damit Ihr Monitor immer den in der Zulassung
geforderten Werten entspricht, ist darauf zu
achten, daß
1. Reparaturen nur durch Fachpersonal
durchgeführt werden.
2. nur original-Ersatzteile verwendet werden.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
环保使用期限
此标识指期限(十年),电子信息产品中含有
的有毒有害物质或元素在正常使用的条件
下不会发生外泄或突变, 电子信息产品用户
使用该电子信息产品不会对环境造成严重
污染或对其人身、 财产造成严重损害的期
限．
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Your Philips F1rst Choice Warranty
6. Customer care and
warranty
Thank you for purchasing this Philips monitor.
All Philips monitors are designed
and manufactured to high
standards and deliver high-quality
PLEASE SELECTYOUR COUNTRY/AREATO
REVIEW DETAILS OFYOUR WARRANTY
COVERAGE
performance, ease of use and
ease of installation. Should you
WESTERN EUROPE
encounter any difficulties while installing or
using this product, please contact the Philips
helpdesk directly to benefit from your Philips
F1rst Choice Warranty.This two-year service
warranty entitles you to a swap model on-site if
your monitor turns out to be faulty or defective.
Philips aims at a swap within 48 hours of your
call being received.
Austria / Belgium / Denmark / France /
Germany / Greece / Finland / Ireland / Italy /
Luxembourg / the Netherlands / Norway /
Portugal / Sweden / Switzerland / Spain / United
Kingdom / Poland
EASTERN EUROPE
Czech Republic / Hungary / Russia / Slovakia /
Slovenia /Turkey
What is covered?
The Philips F1rst Choice Warranty applies within
Andorra,Austria, Belgium, Cyprus, Denmark,
France, Germany, Greece, Finland, Ireland,
Italy, Liechtenstein, Luxembourg, Monaco, the
Netherlands, Norway, Poland, Portugal, Sweden,
Switzerland, Spain and the United Kingdom
and only for monitors originally designed,
manufactured, approved and/or authorized for
usage within these countries.
LATIN AMERICA
Argentina / Brasil
NORTH AMERICA
Canada / USA
PACIFIC
Australia / New Zealand
Warranty coverage begins as from the day you
buy your monitor. For two years thereafter,
your monitor will be swapped by at least an
equivalent monitor in case of defects provided
for under the warranty coverage.
ASIA
China / Hong Kong / India / Indonesia / Korea
/ Malaysia / Pakistan / Philippines / Singapore /
Taiwan /Thailand /Vietnam
The swap monitor remains yours and Philips
keeps the defective/original monitor. For the
swap monitor the warranty period remains
equal to that of your original monitor, being
24 months as from the purchase date of your
original monitor.
AFRICA
South Africa
MIDDLE EAST
United Arab Emirates
32
Download from Www.Somanuals.com. All Manuals Search And Download.
What is excluded?
Just a click away
The Philips F1rst Choice Warranty applies
provided the product is handled properly for its
intended use, in accordance with its operating
instructions and upon presentation of the
original invoice or cash receipt, indicating the
date of purchase, dealer's name and model and
production number of the product.
In case of any problems, we advise you to read
the operating instructions carefully or go to the
support.
Just a phone call away
In order to avoid unnecessary inconvenience,
we advise you to read the operating instructions
website for additional support before contacting
the Philips helpdesk.
The Philips F1rst Choice Warranty may not
apply if:
•
•
The documents have been altered in any
way or made illegible;
To solve your problem quickly, please prepare
the following details before contacting the
Philips helpdesk:
The model or production number on the
product has been altered, deleted, removed
or made illegible;
•
•
•
Philips type number
Philips serial number
•
Repairs or product modifications and
alterations have been executed by
unauthorized service organizations or
persons;
Purchase date (copy of purchase may be
required)
•
•
Damage is caused by accidents including
but not limited to lightning, water or fire,
misuse or neglect;
•
PC environment Processor:
CPU and Graphic card name and driver
version
•
Reception problems caused by signal
conditions or cable or antenna systems
outside the unit;
•
•
Operating system
Application being used
•
Other cards installed
•
•
Defects caused by abuse or misuse of the
monitor;
Having the following information available will
also help speed up the process:
Product requires modification or adaptation
to enable it to comply with local or
national technical standards, which apply in
countries for which the product was not
originally designed, manufactured, approved
and/or authorized.Therefore always check
whether a product can be used in a specific
country.
•
Your proof of purchase indicating: date of
purchase, dealer name, model and product
serial number.
•
The full address to which the faulty
monitor has to be collected and the swap
model should be delivered.
Philips' customer help desks are located
worldwide. Click here to access the F1rst
Choice Contact Information.
•
Note that products that are not originally
designed, manufactured, approved and/
or authorized for usage within the Philips
F1rst Choice countries, do not apply to
the Philips F1rst Choice Warranty. In these
cases the Philips global warranty terms are
valid.
Or you can reach us via:
33
Download from Www.Somanuals.com. All Manuals Search And Download.
F1rst Choice Contact Information
Country
Austria
Code
+43
+32
+45
+358
+352
+31
+47
+48
+351
+34
+46
+41
+44
Telephone number
0810 000206
078 250851
Tariff
0.07
0.06
€
€
Belgium
Denmark
Finland
3525 8761
Local call tariff
0.08
840 320 041
26 84 30 00
0900 0400 063
2270 8250
€
Luxembourg
The Netherlands
Norway
Local call tariff
0.10
€
Local call tariff
Local call tariff
Local call tariff
Poland
0223491505
2 1359 1440
902 888 785
08 632 0016
02 2310 2116
0207 949 0069
Portugal
Spain
0.10
€
Sweden
Local call tariff
Local call tariff
Local call tariff
Switzerland
United Kingdom
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Your Guarantee in Central and Eastern Europe
Dear Customer,
•
Reception problems caused by signal
conditions or cable or antenna systems
outside the unit;
Thank you for purchasing this Philips product,
which has been designed and manufactured to
the highest quality standards. If, unfortunately,
something should go wrong with this product
Philips guarantees free of charge labor and
replacement parts during a period of 24 months
from date of purchase.
•
•
Defects caused by abuse or misuse of the
monitor;
Product requires modification or adaptation
to enable it to comply with local or
national technical standards, which apply in
countries for which the product was not
originally designed, manufactured, approved
and/or authorized.Therefore always check
whether a product can be used in a specific
country.
What is covered?
This Philips Guarantee in Central and Eastern
Europe applies within Czech Republic, Hungary,
Slovakia, Slovenia, Russia andTurkey and only
for monitors originally designed, manufactured,
approved and/or authorized for usage within
these countries.
Please note that the product is not defective
under this guarantee in the case where
modifications become necessary in order for
the product to comply with local or national
technical standards which apply in countries for
which the product was not originally designed
and/or manufactured.Therefore always check
whether a product can be used in a specific
country.
Warranty coverage begins as from the day you
buy your monitor. For two years thereafter,
your monitor will be serviced in case of defects
provided for under the warranty coverage.
What is excluded?
Just a click away
The Philips guarantee applies provided the
product is handled properly for its intended use,
in accordance with its operating instructions and
upon presentation of the original invoice or cash
receipt, indicating the date of purchase, dealer's
name and model and production number of the
product.
In case of any problems, we advise you to read
the operating instructions carefully or go to the
support.
Just a phone call away
In order to avoid unnecessary inconvenience,
we advise you to read the operating instructions
carefully before contacting our dealers or
Information Centers
The Philips guarantee may not apply if:
•
•
the documents have been altered in any
way or made illegible;
the model or production number on the
product has been altered, deleted, removed
or made illegible;
In case your Philips product is not working
correctly or is defective, please contact your
Philips dealer or directly the Philips Service and
Consumer Information Centers
•
•
repairs or product modifications and
lterations have been executed by
unauthorized service organizations or
persons;
damage is caused by accidents including but
not limited to lightning, water or fire, misuse
or neglect.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
CROATIA
Renoprom d.o.o.
Ljubljanska 4,
Consumer Information Centers
Argentina / Australia / Brasil / Canada / New
Zealand / Belarus / Bulgaria / Croatia / Czech
Republic / Estonia / United Arab Emirates /
Hong Kong / Hungary / India / Indonesia /
Israel / Latvia / Lithuania / Malaysia / Middle
East + North Africa / New Zealand / Pakistan
/ Romania / Russia / Serbia & Montenegro /
Singapore / Slovakia / Slovenia / South Africa /
South Korea /Taiwan / Philippines /Thailand /
Turkey / Ukraine /Vietnam
Sv. Nedjelja,10431
Croatia
Tel: +385 1 333 0974
ESTONIA
FUJITSU SERVICES OU
Akadeemia tee 21G
EE-12618Tallinn
Tel: +372 6519900
Eastern Europe
BELARUSTechnic al Center of JV IBA
M. Bogdanovich str. 155
BY - 220040 Minsk
HUNGARY
Serware Szerviz
Vizimolnár u. 2-4
HU - 1031 Budapest
Tel: +36 1 2426331
Email: [email protected]
Tel: +375 17 217 33 86
BELARUS
Service.BY
Petrus Brovky st. 19 – 101-B
220072, Minsk
Belarus
HUNGARY
Profi Service Center Ltd.
123 Kulso-Vaci Street,
H-1044 Budapest (Europe Center)
Hungary
BULGARIA
LAN Service
140, Mimi Balkanska Str.
Office centerTranslog
1540 Sofia, Bulgaria
Tel: +359 2 960 2360
Tel: +36 1 814 8080
LATVIA
ServiceNet LV
Jelgavas iela 36
CZECH REPUBLIC
General Consumer Information Center
800 142100
LV - 1055 Riga,
Tel: +371 7460399
Email: [email protected]
Xpectrum
Lu.ná 591/4
LITHUANIA
ServiceNet LT
Gaiziunu G. 3
CZ - 160 00 Praha 6Tel: 800 100 697 or 220
121 435
LT - 3009 KAUNAS
Tel: +370 7400088
Email: [email protected]
Email:[email protected]
36
Download from Www.Somanuals.com. All Manuals Search And Download.
ROMANIA
TURKEY
Blue Ridge Int'l Computers SRL
115, Mihai Eminescu St., Sector 2
RO - 020074 Bucharest
Tel: +40 21 2101969
Türk PhilipsTicaret A.S.
Yukari Dudullu Org.San.Bolgesi
2.Cadde No:22
34776-Umraniye/Istanbul
Tel: (0800)-261 33 02
SERBIA & MONTENEGRO
KimTec d.o.o.
UKRAINE
Comel
Viline vode bb, Slobodna zona
Beograd L12/3
11000 Belgrade
Shevchenko street 32
UA - 49030 Dnepropetrovsk
Tel: +380 562320045
Topaz-Service Company,
Mishina str. 3,
Serbia
Tel. +381 11 20 70 684
SLOVAKIA
General Consumer Information Center
0800004551
Kiev
Ukraine-03151
Tel: +38 044 245 73 31
Datalan Servisne Stredisko
Puchovska 8
SK - 831 06 Bratislava
Tel: +421 2 49207155
Email: [email protected]
Latin America
ARGENTINA
Azopardo 1480.
(C1107ADZ) Cdad. de Buenos Aires
Tel: 0800 3330 856
Email: [email protected]
SLOVENIA
PC HAND
Brezovce 10
SI - 1236Trzin
BRASIL
Tel: +386 1 530 08 24
Email: [email protected]
Alameda Raja Gabaglia, 188 - 10°Andar -V.
Olímpia - S. Paulo/SP - CEP 04551-090 -
Brasil
RUSSIA
CPS
Tel: 0800-7254101
Email: [email protected]
18, Shelepihinskaya nab.
123290 Moscow
Russia
Pacific
AUSTRALIA
Tel. +7(495)797 3434
Company: AGOS NETWORK PTY LTD
Address: 4/5 Dursley Road,Yenorra, NSW
2161, Australia
Profservice:
14A -3, 2Karacharovskaya str,
109202, Moscow ,
Russia
Tel: 1300 360 386
Fax: +61-2-80808147
Email: [email protected]
Service hours: Mon.~Fri. 8:00am-7:30pm
Tel. +7(095)170-5401
37
Download from Www.Somanuals.com. All Manuals Search And Download.
NEW ZEALAND
2. Jl.Tanah Abang 1 no 12S. Jakarta Pusat.
Phone: 021-3455150, 34835453
Rukan City Home no H31, Gading Square.
3. Jl. Bulevar Barat. Kelapa Gading. Jakarta
Utara.
Company: Visual Group Ltd.
Address: 28 Walls Rd Penrose Auckland
Phone: 0800 657447
Fax: 09 5809607
E-mail: [email protected]
Service Hours: Mon.~Fri. 8:30am~5:30pm
Phone: 021-45870601, 98131424
South Korea
Company: PCS One Korea Ltd.
Address: 112-2, Banpo-dong, Seocho-ku, Seoul,
137-040, Korea
Asia
HONG KONG/Macau
Company Name: PHK Service Limited
Address: Flat A, 10/F., Pak Sun Building, 103 - 107
WoYi Hop Road, Kwai Chung, NewTerritories,
Hong Kong
Call CenterTel: 080-600-6600
Tel: 82 2 591 1528
Fax: 82 2 595 9688
E-mail: [email protected]
Service hours: Mon.~Fri. 9:00AM~ 6:00PM; Sat.
9:00AM~1:00PM
Tel.: (852) 2610-6908 / (852) 2610-6929 for
Hong Kong and (853) 2856-2277 for Macau
Fax: (852) 2485 3574 for Hong Kong and (853)
2856 1498 for Macau
Malaysia
E-mail: [email protected]
Service Hours: Mon.~Sat. 09:00am~06:00pm
Company:After Market Solutions (CE) Sdn Bhd
Address: Lot 6. Jalan 225/51A, 46100 Petaling
Jaya, Selangor DE, Malaysia.
India
Phone: 603 7953 3370
Philips Info Line: 1-800-880-180
Fax: 603 7953 3338
Company: REDINGTON INDIA LTD
Address: SPL Guindy House, 95 Mount Road,
Chennai 600032, India
E-mail: [email protected]
Service Hours: Mon.~Fri. 8:15am~5:15pm; Sat.
9:00am~1:00pm
Tel: +9144-42243352/353
Service hours: Mon.~Fri. 9:00AM~5:30PM; Sat.
9:00AM~1:00PM
Pakistan
Philips Consumer Service
Address: Mubarak manzil, 39, Garden Road,
Saddar, Karachi-74400
Indonesia
Company Name: PT. Gadingsari elektronika
Prima
Tel: (9221) 2737411-16
Fax: (9221) 2721167
Address: Kompleks Pinang 8, Jl. Ciputat raya No.
8F, Pondok Pinang. Jakarta
Tel: 021-750909053, 021-750909056
Fax: 021-7510982
E-mail: [email protected]
E-mail: [email protected]
Service hours: Mon.~Fri. 8:30am~4:30pm;
Sat. 8:30am~2:00pm
Singapore
Company: Philips Electronics Singapore Pte Ltd
(Philips Consumer Care Center)
Address: 620A Lorong 1Toa Payoh,TP4 Building
Level 1, Singapore 319762
Additional service points:
1. Philips Building Jl. Buncit Raya Kav 99.
Jakarta Selatan.
Tel: (65) 6882 3999
Fax: (65) 62508037
Phone: 021-7940040, ext 1722/1724,
98249295, 70980942
E-mail: [email protected]
Service hours: Mon.~Fri. 9:00am~6:00pm; Sat.
9:00am~1:00pm
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Taiwan
CDO Office:
Company: FETEC.CO
1445 Corrales Ext.,CDO City
088-856-8540/856-8541
Sun # 0922-8210080
Address: 3F, No.6, Lane 205, Sec. 1, Chang Hsing
Rd, Lu Chu Hs,Taoyuan,Taiwan R.O.C 33800
Consumer Care: 0800-231-099
Tel: (03)2120336
Iloilo Office:
Fax: (03)3129184
E-mail: [email protected]
Service hours: Mon.~Fri. 8:30am~7:00pm
C. Lim Comp., Gomez St., Iloilo City
# 033 338-4159/ 033 508-3741
Sun # 0922-8808850
Thailand
Africa
Company:Axis Computer System Co., Ltd.
Address: 1421 Soi Lardprao 94, Srivara Town
In Town Soi 3 Road, Wangthonglang, Bangkok
10310Thailand
SOUTH AFRICA
Company name: SylvaraTechnologies Pty Ltd
Address: Ho Address Palm Springs Centre
Christoffel RoadVan Riebeeck Park Kempton
Park, South Africa
Tel: (662) 934-5498
Fax: (662) 934-5499
Tel: +27878084456
E-mail: axis5@axiscomputer.co.th
Service Hours: Mon.~Fri. 08:30am~05:30pm
Fax: +2711 391 1060
E-mail: [email protected]
Service hours: Mon.~ Fri. 08:00am~05:00pm
Glee Electronics Inc
Contact nos. (632) 636-3636 / 7064028 to 29
Fax no. (632) 7064026
Middle East
Middle East + North Africa
Company:AL SHAHD COMPUTER L.L.C
Address: P.O.BOX: 29024, DUBAI, UNITED
ARAB EMIRATES
Receiving Centers
NEO CARE - Megamall
4th Level Cyberzone, Building B,
SM Megamall, Mandaluyong City
TEL: 00971 4 2276525
FAX: 00971 4 2276242
E-mail: [email protected]
NEO CARE - SM North EDSA
4th Level Cyberzone, Annex Bldg.
SM City North EDSA, Quezon City
441-1610
Service hours: Sat.~Thur. 9:00am~1:00pm &
4:00pm- 8:00pm
Israel
Company: Eastronics LTD
MDR Microware Sales Inc.
Cebu Branch
Address: 13 Rozanis St. P.O.B. 39300,Tel Aviv
61392 Israel
N. Escario corner Clavano St., Cebu City Phils.
# 255-4415/ 255-3242/253-9361/4124864 to
67
Tel: 1-800-567000 call free in Israel; (972-50-
8353722 after service hours until 20:00)
Fax: 972-3-6458759
Sun # 0922-8210045 to 46
E-mail: [email protected]
Service hours: Sun.~Thurs. 08:00 - 18:00
Davao Office:
C. Arellano St., Davao City 8000
082- 225-3021/225-3022
Sun# 0922-8210015
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Your Philips F1rst Choice Warranty(USA)
All parts, including repaired and replaced parts,
are covered only for the original warranty
period.When the warranty on the original
product expires, the warranty on all replaced
and repaired products and parts also expires.
Thank you for purchasing this Philips monitor.
All Philips monitors are designed
and manufactured to high
standards and deliver high-quality
performance, ease of use and
ease of installation. Should you
WHAT IS EXCLUDED?
Your warranty does not cover:
encounter any difficulties while installing or using
this product, please contact Philips directly to
benefit from your Philips F1rst Choice Warranty.
This two-year service warranty entitles you to a
swap model on-site within 48 hours of your call
being received within the first year of purchase.
If you have any problems with your monitor
within the second or third year of purchase, we
will repair it after it has been sent to the service
provider at your expense and returned to you
within five working days, free of charge.
labor charges for installation or setup of the
product, adjustment of customer controls on
the product, and installation or repair of antenna
systems outside of the product.
product repair and/or part replacement
because of misuse, accident, unauthorized repair
or other cause not within the control of Philips
Consumer Electronics.
reception problems caused by signal conditions
or cable or antenna systems outside the unit.
a product that requires modification or
adaptation to enable it to operate in any
country other than the country for which it
was designed, manufactured, approved and/or
authorized, or repair of products damaged by
these modifications.
LIMITED WARRANTY (Computer Monitor)
Click here to access the Warranty Registration
Card.
TwoYears Free Labor /TwoYears Free Service
on Parts / OneYear Exchange*
incidental or consequential damages resulting
from the product. (Some states do not allow
the exclusion of incidental or consequential
damages, so the above exclusion may not
apply to you.This includes, but is not limited to,
prerecorded material, whether copyrighted or
not copyrighted.)
*Product will be exchanged with a new or
renewed to original specifications unit within
two business days for the first year.This product
must be shipped in at your expense for service
during years two.
WHO IS COVERED?
the model or production number on the
product has been altered, deleted, removed or
made illegible.
You must have proof of purchase to receive
warranty service. A sales receipt or other
document showing that you purchased the
product is considered proof of purchase. Attach
it to this owner's manual and keep both nearby.
Where IS SERVICE AVAILABLE?
Warranty service is available in all countries
where the product is officially distributed by
Philips Consumer Electronics. In countries
where Philips Consumer Electronics does
not distribute the product, the local Philips
service organization will attempt to provide
service (although there may be a delay if the
appropriate spare parts and technical manual(s)
are not readily available).
WHAT IS COVERED?
Warranty coverage begins the day you buy your
product. For two years thereafter, all parts will
be repaired or replaced, and labor is free.After
two years from the day of purchase, you pay for
the replacement or repair of all parts, and for all
labor charges.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Where CAN I GET MORE INFORMATION?
REMEMBER... Please record the model and
serial numbers found on the product below.
For more information, contact the Philips
Customer Care Center by calling (877) 835-
1838 (U.S.A. customers only) or (919) 573-
7855.
MODEL # ____________________________
SERIAL # ____________________________
Before Requesting Service...
Please check your owner's manual before
requesting service. Adjustments of the controls
discussed there may save you a service call.
This warranty gives you specific legal rights.You
may have other rights which vary from state/
province to state/province.
TO GET WARRANTY SERVICE IN U.S.A.,
PUERTO RICO OR U.S.VIRGIN ISLANDS...
Before contacting Philips, please prepare the
following details so we can solve your problem
quickly.
Contact the Philips Customer Care Center
phone number listed below for product
assistance and procedures for servicing:
•
•
•
Philips type number
Philips serial number
Philips Customer Care Center
Purchase date (copy of purchase may be
required)
(877) 835-1838 or (919) 573-7855
•
PC environment Processor:
CPU and Graphic card name and driver
version
(In U.S.A., Puerto Rico and U.S.Virgin Islands, all
implied warranties, including implied warranties
of merchantability and fitness for a particular
purpose, are limited in duration to the duration
of this express warranty. But, because some
states do not allow limitations on how long an
implied warranty may last, this limitation may
not apply to you.)
•
•
•
Operating system
Application being used
•
•
•
Other cards installed
Having the following information available
will also help speed up the process:
TO GET WARRANTY SERVICE IN
CANADA...
Your proof of purchase indicating: date of
purchase, dealer name, model and product
serial number.
Please contact Philips at: (800) 479-6696
The full address to which the swap model
should be delivered.
Two years free parts and two years free labor
will be provided at Philips Canada depot or any
one of its authorized service centers.
Just a phone call away
Philips’ customer help desks are located
worldwide.Within the U.S. you can contact
Philips customer care Monday-Friday from
8:00 AM-9:00 PM EasternTime (ET) and on
Saturdays from 10:00 AM-5:00 PM ET hrs by
using one of the contact phone numbers.
(In Canada, this warranty is given in lieu of all
other warranties. No other warranties are
expressed or implied, including any implied
warranties of merchantability or fitness for a
particular purpose. Philips is not liable under
any circumstances for any direct, indirect, special,
incidental or consequential damages, howsoever
incurred, even if notified of the possibility of
such damages.)
For more information on this and more great
Philips products visit our website at:
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Your International Guarantee
In case your Philips product is not working
correctly or is defective, please contact your
Philips dealer. In the event you require service
whilst in another country a dealer address can
be given to you by the Philips Consumer Help
Desk in that country, the telephone and fax
number of which can be found in the relevant
part of this booklet.
Dear Customer,
Thank you for purchasing this Philips product
which has been designed and manufactured to
the highest quality standards.
If, unfortunately, something should go wrong
with this product Philips guarantees free of
charge labor and replacement parts irrespective
of the country where it is repaired during a
period of 12 months from date of purchase.This
international Philips guarantee complements the
existing national guarantee obligations to you of
dealers and Philips in the country of purchase
and does not affect your statutory rights as a
customer.
In order to avoid unnecessary inconvenience,
we advise you to read the operating instructions
carefully before contacting your dealer. If you
have questions which your dealer cannot
answer or any related question please contact
the Philips Consumer Information Centers or
via:
The Philips guarantee applies provided the
product is handled properly for its intended use,
in accordance with its operating instructions and
upon presentation of the original invoice or cash
receipt, indicating the date of purchase, dealer's
name and model and production number of the
product.
The Philips guarantee may not apply if:
•
•
the documents have been altered in any
way or made illegible;
the model or production number on the
product has been altered, deleted, removed
or made illegible;
•
•
repairs or product modifications and
alterations have been executed by
unauthorized service organizations or
persons;
damage is caused by accidents including but
not limited to lightning, water or fire, misuse
or neglect.
Please note that the product is not defective
under this guarantee in the case where
modifications become necessary in order for
the product to comply with local or national
technical standards which apply in countries for
which the product was not originally designed
and/or manufactured.Therefore always check
whether a product can be used in a specific
country.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
AUTO button doesn't function
7. Troubleshooting & FAQs
•
The auto function is applicable only in
VGA-Analog mode. If the result is not
satisfactory, you can do manual adjustments
via the OSD menu.
7.1 Troubleshooting
This page deals with problems that can be
corrected by a user. If the problem still persists
after you have tried these solutions, contact
Philips customer service representative.
Note
The Auto Function is not applicable in DVI-
Digital mode as it is not necessary.
Visible signs of smoke or sparks
Common Problems
•
•
Do not perform any troubleshooting steps.
No Picture (Power LED not lit)
Disconnect the monitor from mains power
source immediately for safety.
•
Make sure the power cord is plugged into
the power outlet and into the back of the
monitor.
•
Contact with Philips customer service
representative immediately.
•
First, ensure that the power button on the
front of the monitor is in the OFF position,
then press it to the ON position.
Imaging Problems
Image is not centered
No Picture (Power LED is Blue)
•
Adjust the image position using the “Auto”
function in OSD Main Controls.
•
•
Make sure the computer is turned on.
•
Adjust the image position using the Phase/
Clock of Setup in OSD Main Controls. It is
valid only in VGA mode.
Make sure the signal cable is properly
connected to your computer.
•
Make sure the monitor cable has no bent
pins on the connect side. If yes, repair or
replace the cable.
Image vibrates on the screen
•
Check that the signal cable is properly
securely connected to the graphics board
or PC.
•
The Energy Saving feature may be activated.
Screen says
Vertical flicker appears
•
Make sure the monitor cable is properly
connected to your computer. (Also refer to
the Quick Set-Up Guide).
•
•
Check to see if the monitor cable has bent
pins.
•
•
Adjust the image using the “Auto” function
in OSD Main Controls.
Make sure the computer is turned on.
Eliminate the vertical bars using the Phase/
Clock of Setup in OSD Main Controls. It is
valid only in VGA mode.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Horizontal flicker appears
Green, red, blue, dark, and white dots appears
on the screen
•
The remaining dots are normal
characteristic of the liquid crystal used in
today’s technology, Please refer the pixel
policy for more detail.
•
•
Adjust the image using the “Auto” function
in OSD Main Controls.
The "power on" light is too strong and is
disturbing
Eliminate the vertical bars using the Phase/
Clock of Setup in OSD Main Controls. It is
valid only in VGA mode.
•
You can adjust “power on” light using the
power LED Setup in OSD main Controls.
Image appears blurred, indistinct or too dark
For further assistance, refer to the Consumer
Information Centers list and contact Philips
customer service representative.
•
Adjust the contrast and brightness on
On-Screen Display.
An "after-image", "burn-in" or "ghost image"
remains after the power has been turned off.
•
Uninterrupted display of still or static
images over an extended period may cause
"burn in", also known as "after-imaging "
or "ghost imaging", on your screen. "Burn-
in", "after-imaging", or "ghost imaging" is a
well-known phenomenon in Monitor panel
technology. In most cases, the "burned in"
or "after-imaging" or "ghost imaging" will
disappear gradually over a period of time
after the power has been switched off.
•
•
•
Always activate a moving screen saver
program when you leave your monitor
unattended.
Always activate a periodic screen refresh
application if your Monitor will display
unchanging static content.
Severe “burn-in” or “after-image” or “ghost
image” symptoms will not disappear and
cannot be repaired.The damage mentioned
above is not covered under your warranty.
Image appears distorted.Text is fuzzy or
blurred.
•
Set the PC’s display resolution to the same
mode as monitor’s recommended screen
native resolution.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
adaptor driver from corresponding
companies’ web site. Install the driver.
Remove SmartControl Premium, and
re-install it once more.
7.2 SmartControl Premium FAQs
Q1.
I change the monitor on a PC to a
different one and the SmartControl
Premium becomes un-usable, what do
I do?
If it is still not working, we are sorry that
the graphic adaptor is not supported.
Please visit Philips website and check
if an updated SmartControl Premium
driver is available.
Ans.: Restart your PC and see if
SmartControl Premium can work.
Otherwise, you will need to remove
and re-install SmartControl Premium to
ensure proper driver is installed.
Q4.
When I click on Product Information,
only partial information is shown, what
happened?
Q2.
The SmartControl Premium functions
worked well before, but it does not
work anymore, what can I do?
Ans.: It might be your graphic card adaptor
driver is not the most updated
version which fully supporting DDC/
CI interface. Please try to download
the most updated graphic adaptor
driver from corresponding companies’
web site. Install the driver. Remove
SmartControl Premium and re-install it
once more.
Ans.: If the following actions were executed,
the monitor driver may need to be re-
installed.
•
Changed video graphic adapter to another
one
•
•
Updated video driver
Activities on OS, such as service pack or
patch
•
•
•
Run Windows Update and updated
monitor and/or video driver
Windows was booted with the monitor
power off or disconnected.
Q5.
I forgot my PIN for Theft Deterrence
Function. How can I do?
To find out, please right click My Computer
and click on Properties->Hardware->
Device Manager.
Ans.: Philips Service center has a right to
ask for legitimate identification and
authorization, in order to establish
ownership of the monitor.
•
If you see "Plug and Play Monitor" shows
under Monitor, then you need to re-install.
Simply remove SmartControl Premium and
re-install it.
Q3.
After installing SmartControl Premium,
when clicking on SmartControl
Premium tab, nothing shows up after a
while or a failure message shows, what
happened?
Ans.: It might be your graphic adaptor is not
compatible with the SmartControl
Premium. If your graphic adaptor is one
of the above mentioned brands, try to
download the most updated graphic
45
Download from Www.Somanuals.com. All Manuals Search And Download.
package. Monitor drivers (.inf and .icm
files) will be installed automatically.
7.3 General FAQs
Q1:
When I install my monitor what should
I do if the screen shows 'Cannot
display this video mode'?
Q4:
How do I adjust the resolution?
Ans.: Your video card/graphic driver and
monitor together determine the
available resolutions.You can select the
desired resolution under Windows®
Control Panel with the "Display
properties".
Ans.: Recommended resolution for Philips
23": 1920 x 1080 @60Hz.
•
•
Unplug all cables, then connect your PC to
the monitor that you used previously.
In the Windows Start Menu, select Settings/
Control Panel. In the Control Panel
Window, select the Display icon. Inside the
Display Control Panel, select the 'Settings'
tab. Under the setting tab, in box labeled
'desktop area', move the sidebar to 1920 x
1080 pixels (23").
Q5:
What if I get lost when I am making
monitor adjustments via OSD?
Ans.: Simply press the OK button, then select
'Reset' to recall all of the original factory
settings.
Q6:
Is the LCD screen resistant to
scratches?
•
•
Open 'Advanced Properties' and set the
Refresh Rate to 60Hz, then click OK.
Ans.: In general it is recommended that
the panel surface is not subjected to
excessive shocks and is protected from
sharp or blunt objects.When handling
the monitor, make sure that there is
no pressure or force applied to the
panel surface side.This may affect your
warranty conditions.
Restart your computer and repeat step 2
and 3 to verify that your PC is set at 1920
x 1080 @60Hz (23").
•
Shut down your computer, disconnect your
old monitor and reconnect your Philips
Monitor.
•
Turn on your monitor and then turn on
your PC.
Q7:
How should I clean the LCD surface?
Q2:
What does the recommended refresh
rate for Monitor?
Ans.: For normal cleaning, use a clean, soft
cloth. For extensive cleaning, please use
isopropyl alcohol. Do not use other
solvents such as ethyl alcohol, ethanol,
acetone, hexane, etc.
Ans.: Recommended refresh rate in Monitors
is 60Hz, In case of any disturbance on
screen, you can set it up to 75Hz to see
if that removes the disturbance.
Q8:
Can I change the color setting of my
monitor?
Q3:
What are the .inf and .icm files on the
CD-ROM? How do I install the drivers
(.inf and .icm)?
Ans.: Yes, you can change your color setting
through OSD control as the following
procedures,
Ans.: These are the driver files for your
monitor. Follow the instructions in your
user manual to install the drivers.Your
computer may ask you for monitor
drivers (.inf and .icm files) or a driver
disk when you first install your monitor.
Follow the instructions to insert the (
companion CD-ROM) included in this
•
•
Press "OK" to show the OSD (On
Screen Display) menu
Press "Down Arrow" to select the
option "Color" then press "OK" to
enter color setting, there are three
settings as below.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Color Temperature;The six settings are
5000K, 6500K, 7500K, 8200K, 9300K and
11500K.With settings in the 5000K range
the panel appears ‘warm,' with a red-white
color tone, while a 11500K temperature
yields ‘cool, blue-white toning."
Q12: What is Image Sticking, or Image Burn-
in, or After Image, or Ghost Image in
Monitor panels?
Ans.: Uninterrupted display of still or static
images over an extended period
may cause "burn in", also known as
"after-imaging" or "ghost imaging",
on your screen. "Burn-in", "after-
imaging", or "ghost imaging" is a well-
known phenomenon in Monitor panel
technology. In most cases, the "burned
in" or "atter-imaging" or "ghost imaging"
will disappear gradually over a period of
time after the power has been switched
off.
2. sRGB; this is a standard setting for ensuring
correct exchange of colors between
different device (e.g. digital cameras,
monitors, printers, scanners, etc)
3. User Define; the user can choose his/her
preference color setting by adjusting red,
green blue color.
Note:
A measurement of the color of light radiated
by an object while it is being heated.This
measurement is expressed in terms of
absolute scale, (degrees Kelvin). Lower Kevin
temperatures such as 2004K are red; higher
temperatures such as 9300K are blue. Neutral
temperature is white, at 6504K.
Always activate a moving screen saver
program when you leave your monitor
unattended.
Always activate a periodic screen
refresh application if your Monitor will
display unchanging static content.
Warning
Q9:
Can I connect my Monitor to any PC,
workstation or Mac?
Severe"burn-in" or "after-image" or "ghost image"
symptoms will not disappear and cannot be
repaired.The damage mentioned above is not
covered under your warranty.
Ans.: Yes. All Philips Monitors are fully
compatible with standard PCs, Macs
and workstations.You may need a cable
adapter to connect the monitor to
your Mac system. Please contact your
Philips sales representative for more
information.
Q13: Why is my Display not showing
sharp text, and is displaying jagged
characters?
Ans.: Your Monitor works best at its native
resolution of 1920 x 1080 @60Hz. For
best display please use this resolution.
Q10: Are Philips Monitors Plug-and- Play?
Ans.: Yes, the monitors are Plug-and-Play
compatible with Windows 7/Vista/XP/
NT, Mac OSX, Linux
Q11: What kind of wide-angle technology is
available?
Ans.: Currently, the IPS type panels offer the
best Contrast Ratio, compared to MVA,
or PVA technologies. TN panels have
improved over the years, but IPS panel
still gives superior results overTN panel.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
2010 © Koninklijke Philips Electronics N.V. All rights reserved.
Philips and the Philips Shield Emblem are registered trademarks of
Koninklijke Philips Electronics N.V. and are used under license from
Koninklijke Philips Electronics N.V.
Specifcations are subject to change without notice.
Version: M2239CLE1T
Download from Www.Somanuals.com. All Manuals Search And Download.
|