LCD TV
17PF9945
23PF9945
Operating Instructions
17/23PF9945/69 p1
1
3/13/03, 4:43 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INFORMATION
• Disconnect mains plug when :
– the red light below the TV screen is flashing continuously.
– cleaning the TV screen. Never use abrasive cleaning agents.
– there is a lightning storm.
– the set is left unattended for a prolonged period of time.
• No naked flame sources, such as lighted candles, should be placed on top of the TV or
in the vicinity.
• Do not place your TV set under direct sunlight or heat.
• Leave at least 5 cm around each side of TV set to allow for proper ventilation.
• Avoid placing your set (e.g. near the window) where it is likely to be exposed to rain or
water.
• No objects (such as vases) filled with liquids should be placed on top the TV so as to avoid
dripping or splashing of liquids on the set.
PRECAUTION
• Do not shift or move the set around when it is switched on.
• Do not connect AC/DC adaptor to your set that does not originally comes with the set.
Only use recommended part that is approved by Philips manufacturer.
• Caution : Do not use cover or enclose the AC/DC adaptor with any objects like a cloth or
box which might shorten the life time of the equipment.
• Do not touch, push or rub the surface with hard object.
• When the surface becomes dusty, wipe gently with absorbent cotton or other soft materials
like chamois, soak with petroleum benzene. Do not use acetone, toluene and acohol as it
causes chemical damage to the polarizer.
• Wipe off saliva or water droplets as soon as possible. Long time contact with polarizar
causes deformations and colour fading.
• Be careful of condensation at sudden temperature change. Condensation does damage to
polarizar or electrical contact parts. After condensation fades, smear or spot will occur.
Recycling Directive – To minimise harm to the environment, the batteries
supplied with theTV set do not contain mercury or nickel cadmium.If possible,
when disposing of batteries,use recycling means available to you.YourTV set
uses materials which are reusable or which can be recycled.To minimise the
amount of waste in the environment,specialist companies recover used sets
for dismantling and collection of reusable materials (contact your dealer).
3
17/23PF9945/69 p2-6
3
3/13/03, 4:50 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
HOOKING UP YOUR TV (BASIC CONNECTION)
Positioning of the TV set
• Place your TV set on a solid base, strong enough to
withstand the weight of the set.
• Leave a space of at least 5 cm around each side of the
TV set to allow for proper ventilation.
ª Do not place TV set near a radiator or other sources
of heat.
5 cm
5cm
5 cm
Ñ
É
Ñ
É
• Do not place TV set where it can be exposed to rain
or excessive moisture.
Antenna Connection
• Connect the aerial plug to the antenna socket ¬
on the backcover.
Mains Connection
• Insert the mains plug into the wall socket. For correct
mains voltage, refer to type sticker at the rear of the
adaptor.
• Consult your dealer if mains supply is different.
Note : This diagram is not representative of the actual
plug and socket.
Switching on the Set
• Press the main power button on the top controls
to switch on/off the TV.
• If the set is on standby (indicator is red), press the
Power button on the remote control to switch on
set.
USE/CARE OF REMOTE CONTROL
• Insert the correct type of batteries into the
compartment.
• Ensure the batteries are placed in the right
direction.
4
17/23PF9945/69 p2-6
4
3/13/03, 4:50 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
CHECKING THE SUPPLIED ACCESSORIES
The following accessories are supplied together with the LCD set.
Remote Control 2 AA Batteries
Antenna Cable
Mains Plug
Note : This plug is not
representative of the actual
plug.
DRESSING THE CABLES
For better cable management, it is advisable to insert all cables through the hole of the
stand as shown in the diagram after connecting to the respective connectors. For connection
description, refer to sections on :
– Connecting the Audio/Video Sockets (Playback)
– Connecting the Audio/Video Sockets (Recording)
– Connecting to the Audio Equipment,Amplifier and Subwoofer
– Connecting to the Headphone
– Connecting to the FM Radio Mains
– Connecting the PC Equipment
– Connecting the HD (High Definition) Equipment
5
17/23PF9945/69 p2-6
5
3/13/03, 4:50 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
MOUNTING PROCEDURES FOR LCD TV
If you want to mount the LCD TV on any device, this set has four mounting interfaces fulfilling
VESA specifications.
Rear of LCDTV
Screws
Screws
Stand
1) Lay the LCDTV face-down on a flat surface with a cushion or other soft material to
protect the screen.
2) Remove all cables connected on theTV.
3) Remove the four screws and then remove the stand from the LCDTV.
4) Screw in mounting plate. Reconnect all cables to the LCDTV.
You are now ready to mount the device. Below is an example of adjusted ranges and
mounting options (VESA compatible).
6
17/23PF9945/69 p2-6
6
3/13/03, 4:50 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING THE AUDIO/VIDEO SOCKETS (PLAYBACK)
You can view the playback of VCR tapes (Video Disc players, camcorders, etc.) by using the
AUDIO and VIDEO INPUT sockets on the rear of the TV.
Pr
Pb
Y
L
Audio in (PC / HD)
HD input
75
FM ANT COMP
VIDEO
INPUT
–
Connect the VIDEO and AUDIO IN
sockets on the rear of the LCD TV to the
AUDIO and VIDEO OUT sockets on
the VCR.
AV1
in
R
L
Y
Pb
Pr
R
DC in
PC input (VGA)
Audio in
Video in
AV1
in
Audio
out
Monitor
out
Rear of TV
Rear of VCR
OUT
OUT
VIDEO
IN
OUT
VCR
ANTENNA
L
R
AUDIO
IN
IN
The S-Video connection on the Side of
the LCD TV is used for the playback of
S-VHS VCR tapes, Video Discs, Video
Games or Compact Disc-Interactive (cd-i)
discs. Better picture detail and clarity is
possible with the S-Video playback as
compared to the picture from a normal
antenna (RF) connection.
–
–
Connect the S-VIDEO socket on the
side of the LCDTV to the S-VHS OUT
socket on a S-VHS VCR.
VCR (Equipped
with Video and
Audio sockets)
OUT
OUT
VIDEO
IN
OUT
OUT
Connect the AUDIO IN sockets from
the rear of theTV to the AUDIO OUT
sockets on theVCR. Note : You need
not connect the VIDEO IN socket of the
LCDTV if S-VIDEO IN socket is
connected.
Back of S-VHS VCR
L
R
AUDIO
S-VIDEO ANTENNA
IN
IN
Side Controls
For more convenient direct playback
connections, the Side Audio/Video Input
sockets allow for quick and easy
connections, particularly Camcorder tape
recordings.
–
Connect the S-VIDEO socket (if
available) from the Camcorder to the
Side S-VIDEOsocket of theTV. You
need not connect the Side VIDEO IN
socket of theTV if the S-VIDEO socket
is connected.
Camcorder
–
Connect the AUDIO OUT sockets
(Right and Left) from the Camcorder to
the Side AUDIO IN sockets.
7
17/23PF9945/69 p7-13
7
3/13/03, 4:51 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING THE AUDIO/VIDEO SOCKETS (PLAYBACK)
DVD (Equipped
with "Y", "Pb" and "Pr"
and Output sockets)
Pr
Pb
Y
L
Audio in (PC / HD)
HD input
75
FM ANT COMP
VIDEO
INPUT
AV1
in
Y
Pb
Pr
R
L
L
R
Y
Pb
Pr
R
AUDIO
DC in
PC input (VGA)
Audio in
Video in
AV1
in
Audio
out
Monitor
out
You can view the playback of DVD discs by using the COMPONENT VIDEO INPUT
sockets at the rear of the LCD TV.
–
Connect the “Y”, “Pb” and the “Pr” sockets at the rear of the LCDTV to the “Y”, “Pb”
and “Pr” OUTPUT sockets of the DVD player to view playback of DVD discs.
CONNECTING THE AUDIO/VIDEO SOCKETS (RECORDING)
Side Sockets
Connection for recording from
theTV channel
–
Connect the corresponding INPUT
sockets of theVCR to the MONITOR
OUTPUT sockets at the rear of the
LCDTV.
VCR (Equipped
with Video and
Audio sockets)
OUT
ANTENNA
IN
OUT
VIDEO
IN
OUT
L
R
AUDIO
IN
VCR
Side Sockets
Connection for recording from
oneVCR to another VCR
–
–
Connect the sockets of theVCR which
you want to record from, to the
corresponding sockets at AV2.
OUT
OUT
VIDEO
IN
OUT
ANTENNA
L
R
AUDIO
IN
IN
Connect the sockets of the receivingVCR
to the MONITOR OUTPUT sockets
at the side of the LCDTV.
OUT
OUT
OUT
ANTENNA
VIDEO
L
R
AUDIO
IN
VCR 2
VCR (Equipped
with Video and
Audio sockets)
VCR 1
8
17/23PF9945/69 p7-13
8
3/13/03, 4:51 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING TO THEAUDIOEQUIPMENT,AMPLIFIER AND SUBWOOFER
Side Controls
SUBWOOFER
Connect the audio cable to the audio input
of your audio equipment and to AUDIO L
and R at the rear of theTV
If you have a subwoofer, connect the cable
from Subwoofer Out socket to an external
amplifier.
SPEAKERS
L
R
You can listen to yourTV sound via your
audio equipment.
Note : If you want to connect more
equipment to yourTV, consult your dealer.
CONNECTING TO THE HEADPHONE
SIDE CONTROLS
(EXTERNAL 2)
Insert the plug into the headphone soket
; at the Side sockets of the LCDTV.
CONNECTING TO THE FM RADIO MAINS
Rear of TV
Pb
Pr
Y
L
Audio in (PC / HD)
HD input
COMP
VIDEO
INPUT
FM ANT
75
AV1
in
R
L
R
Y
Pb
Pr
DC in
PC input (VGA)
Audio in
Video in
AV1
in
Audio
out
Monitor
out
To FM
Radio
Mains
To enable you to access FM radio mode in
theTV, you must connect from FM Antenna
socket to the
FM Radio mains.
9
17/23PF9945/69 p7-13
9
3/13/03, 4:51 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING THE PC EQUIPMENT
Adaptor
To Mains
Rear of TV
Pr
Pb
Y
L
Audio in (PC / HD)
HD input
FM ANT COMP
VIDEO
75
INPUT
AV1
in
R
L
Y
Pb
Pr
R
DC in
PC input (VGA)
Audio in
Video in
AV1
in
Audio
out
Monitor
out
To enable you to access PC mode in theTV, you must connect the following :
–
–
–
Connect adaptor from DC in to the mains.
Connect the PC input (VGA) to the Monitor Output of your PC
Connect Audio L and R output of your PC to the Audio IN L and R of your LCDTV.
CONNECTING THE HD (HIGH DEFINITION) EQUIPMENT
Rear of TV
Pr
Pb
Y
L
Audio in (PC / HD)
HD input
FM ANT COMP
VIDEO
75
INPUT
AV1
in
R
L
Y
Pb
Pr
R
DC in
PC input (VGA)
Audio in
Video in
AV1
in
Audio
out
Monitor
out
DVD (Equipped
with "Y", "Pb" and "Pr"
and Output sockets)
AUDIO
VIDEO
OUTPUT
Back of DVD player
L
–
–
Connect the“Y”,“Pb and the“Pr” sockets of the
HD INPUT at the rear of the LCD TV to the
“Y”, “Pb” and “Pr” OUTPUT sockets of the
DVD player.
OR
M
Connect Audio L and R OUTPUT of your
Set-top box to the Audio IN L and R of HD
INPUT of the LCDTV.
OUTPUT
HDTV Set-Top Box
10
17/23PF9945/69 p7-13
10
3/13/03, 4:51 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS OF REMOTE CONTROL
& POWER button
–
Switch set off to standby mode.To switch on set from
standby mode, press Channel +/– , Digit (0 -9) or Power
button.
&
é
“
2
MODE
A/CH
VCR
DVD
v
é MODE button/VCR and DVD indicators
Press the Mode button repeatedly to choose betweenVCR
or DVD mode.TheVCR or DVD indicator will light up if
selected. OnceVCR or DVD mode is selected, it allows you
access to the Record, Play, Stop, Pause, Forward and Rewind
functions for yourVCR or DVD player. Note : The set will
switch toTV mode if there is no activity on any of the
VCR/DVD buttons after 20 seconds.
æ
o
‘
(
§
è
!
X
g
b
SMART
MENU
ACTIVE
SMART
CONTROL
k
“ VCR/DVD buttons
ç
MUTE
VCR/DVD buttons allows you access to the Record,Play,
Stop, Forward and Rewind functions for yourVCR or DVD
player (Applicable to only certain models of PHILIPS). For
these functions to be enabled, you must selectVCR or DVD
mode by the MODE button.
¬
V
CH
0
1
OK
PC
RADIO
TV
HD
1
2
5
8
0
3
6
4
‘ SLEEPTIMER button
7
9
It allows you to select a time period after which the set will
switch to standby mode automatically. (Refer to section on
“Activating the Sleeptimer”
q
i
2
3
( 4 / TELETEXT button
–
When inTV mode, it allows you to switch from Stereo to Mono
sound during stereo transmission or to choose between
language5or language6during dual sound transmission.
When in teletext mode, allows you to display dual page text.
–
§ SMART SOUND button
Press the Smart Sound button repeatedly to access 4 different
types of sound settings and choose your desired setting.
è MENU button
Displays the main menu. Also exits menu from screen.
! CURSOR LEFT/UP button
–
–
Cursor Left button allows you to select the sub-menus and adjust the settings.
Cursor Up button allows you to select the next item on the menu.
ç VOLUME + / – button
Increases or decreases volume.
0 TV button
When you are in PC, HD or FM Radio mode, press this button to enter intoTV mode.
1 PC button
When you are inTV, HD or FM Radio mode, press this button to enter into PC mode.
2 INDEX/OSD button
–
When in teletext mode, it functions as an Main Index button (Refer to section on
“Using theTeletext).
When inTV mode, press to exit on-screen menu. Also displays information like
current channel number, sound mode, etc..
–
3 FORMAT /TIMER (VCR) button
InTV mode, it allows to select your desired screen format. Refer to section on (“Using
the Screen Format”). Also allows you timer function inVCR mode.
11
17/23PF9945/69 p7-13
11
8/15/03, 1:32 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS OF REMOTE CONTROL
4 AV / TELETEXT button
–
–
InTV mode, it allows you to select the AV channels.
2
InTeletext mode, it allows to access teletext information.
(Refer to section on“Using theTeletext”)
4
MODE
A/CH
VCR
DVD
v
7
æ
o
5
6
5 PICTURE-IN-PICTURE ON/OFF button
–
8
9
20
21
22
23
When in PC mode, it allows you to call up a sub-screen
within your main screen enabling you to watch aTV channel.
X
g
b
SMART
MENU
ACTIVE
SMART
6 PICTURE-IN-PICTURE POSITION button
–
CONTROL
k
When in PC mode, it allows you to position the sub-screen
to be on the top left, top right, bottom right or the bottom
left corner of your screen.
24
7 ALTERNATE CHANNEL button
Allows to alternate between the current channel and the
previous channel.
MUTE
¬
V
CH
25
OK
PC
RADIO
26
27
TV
HD
8 TELETEXT / HOLD button
1
2
5
8
0
3
6
–
In teletext mode, it allows you to access teletext
information (Refer to section on“Using theTeletext”) .
InVCR or DVD mode, it serves as a pause function for
yourVCR or DVD player.
4
28
–
7
9
q
i
91TELETEXT button
Allows to access teletext mode.
20 SMART PICTURE button
Press the Smart Picture button repeatedly to access 5
different types of picture settings and choose your desired
setting.
ACTIVE CONTROL button
21
Adjusts settings automatically for optimal picture quality under any
signal conditions (Refer to section on“Using the Active Control”)
SURROUND SOUND button
22
–
Allows you to select Incredible Surround, Dolby Virtual Surround and Stereo sound when
transmission is in stereo mode.
–
Allows you to select Spatial Sound or Mono sound when transmission is in mono mode.
CURSOR RIGHT / DOWN buttons
Cursor Right button allows you to access the sub-menus adjust the settings.
Cursor Down button allows you to select the next item on the menu.
23
–
–
24 CHANNEL + / – buttons
Allows you to select channels in ascending or descending order.
MUTE button
Mutes sound.To restore sound, press button again.
25
26
RADIO button
Allows to access radio mode. (Refer to section on “Accessing the FM Radio Installation
Menu ”)
HD (High Definition) button
27
Allows you to select the High definition mode when the “Y”,“Pb and the “Pr” sockets
at the HD INPUT at the rear of the LCDTV are connected to the to the “Y”,“Pb” and
“Pr” OUTPUT sockets of the DVD player.
28 DIGIT (0 -9) buttons
Allows you select a channel. Note : For a 2-digit number, the second digit must be
entered before the “–” sign disappears.
12
17/23PF9945/69 p7-13
12
5/6/03, 2:26 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS OF TV TOP CONTROLS
é
&
“
‘
&
é
“
‘
Mains Power button
Volume – / + buttons
Channel – / + buttons
Remote Sensor
Switch mains power on or off.
Adjust sound volume softer/louder.
Select channel in descending/ascending order.
Acts as a sensor for activating the controls of the
TV when remote control handset is aimed at it.
Note
•
You can enter the main menu by pressing both theVolume- and+buttons at the
same time.
•
•
Press the Channel + or – button to select the next item on the menu.
PressVolume + or – button to access sub-menu and adjust the settings.
13
17/23PF9945/69 p7-13
13
3/13/03, 4:51 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSING THETV MAIN MENU AND SUB-MENUS
The TV main menu allows you to access to the Picture, Sound, Features and Install menus
How to call up the main menu
MENU
Press the
(MENU) button to enter the main menu.
and (Cursor
•PICTURE
•SOUND
LANGUAGE
The 4 buttons
,
,
AUTO STORE
MANUAL STORE
SORT
•FEATURES
Up, Down, Left and Right) on the remote control allow
you to select the desired menu item, make adjustments
▲
É
•INSTALL
CHANNEL EDIT
i
and access the sub-menus. Use the
exit menu from screen.
(OSD) button to
OVERVIEW OF TV MAIN MENU AND SUB-MENUS
First Level
Second Level
Third Level
Fourth Level
PICTURE
Brightness
Colour
Contrast
Sharpness
Colour Temperature
Cool
Normal
Warm
Incredible Picture
Equalizer
SOUND
120Hz
500Hz
....... etc.
Balance
AVL
Incredible Surround
FEATURES
Timer
Time
Start Time
Stop Time
Channel
Activate
Display
Mode Select
FM Radio
HD
PC
Child Lock
Widescreen
14
17/23PF9945/69 p14-18
14
8/15/03, 1:34 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
......... OVERVIEW OF TV MAIN MENU AND SUB-MENUS
First Level
Second Level
Third Level
Fourth Level
INSTALL
Language
English
B. Melayu
Auto Store
Search
Manual Store
Colour System
Sound System
Auto
PAL
.... etc
Auto
B/G
.... etc
Search
Channel
Store
Fine Tune
Sort
From
To
Exchange
Channel Edit
Name
Skipped
Personal
15
17/23PF9945/69 p14-18
15
8/15/03, 1:34 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
OVERVIEW OF FM RADIO MAIN MENU AND SUB-MENUS
ThisTV also provides you with the FM RADIO for your listening pleasure. To enable you to
access the FM RADIO mode, you must connect the cable from FM Rntenna socket to the
RADIO
FM Radio mains. Press
(FM RADIO) button to enter into FM Radio mode.
Here is an overview of the FM RADIO Main menu and Sub-menus
First Level
Second Level
Third Level
Fourth Level
SOUND
Equalizer
120HZ
500HZ
....... etc.
Balance
AVL
Incredible Surround
FEATURES
Timer
Time
Start Time
Stop Time
Channel
Activate
Display
Mode Select
Screensaver
TV
HD
PC
INSTALL
Language
English
B. Melayu
Auto Store
Search
Manual Store
Search
Channel
Store
Sort
From
To
Exchange
Name
Personal
16
17/23PF9945/69 p14-18
16
3/13/03, 4:56 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
OVERVIEW OF PC MENU AND SUB-MENUS
ThisTV also allows you use yourTV as a PC monitor. To enable you to access PC mode in the
TV, you must connect the following :–
& Connect DC input terminal to theAC adaptor.
é Connect the Mains Plug from the AC adaptor to the AC outlet.
“ Connect the PC input (VGA) to the Monitor Output of your PC.
‘ Connect Audio L and R output of your PC to the Audio in (PC) L and R of yourTV.
PC
( Press
button to enter into PC mode.
MENU
§ Press
button to enter into the PC Main Controls Menu.
First Level
Second Level Third Level Fourth Level
AUDIO SELECTION
PC
TV/Source/FM Radio
BRIGHTNESS &
CONTRAST
Brightness
Contrast
ADJUST COLOR
Color Temp
Normal
Warm
Cool
Personal
Red
Green
Blue
VIDEO NOISE
Phase
Clock
ADJUST POSITION
AUTO ADJUST
PIP CONTROLS
Horizontal
Vertical
Save
Yes
No
PIP Switch
Off
On
Size
Position
MODE SELECT
TV Mode
FM Radio Mode
HD Mode
RESET TO FACTORY
SETTINGS
No
Yes
VIEW FORMATS
Native
Wide Screen
17
17/23PF9945/69 p14-18
17
8/15/03, 1:35 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
OVERVIEW OF HD MENU AND SUB-MENUS
The HD (High Definition) mode offers you Picture and Sound adjustments, Mode Select and
Lock Channel feature.
First Level
Second Level
Third Level
Fourth Level
PICTURE
Brightness
Color
Contrast
Sharpness
Hue
Color Temperature
Cool
Normal
Warm
Format
Full SCreen
Wide Screen
SOUND
Equalizer
120Hz
500Hz
....... etc.
Balance
AVL
MODE
SELECT
TV Mode
FM Radio Mode
PC Mode
LOCK
CHANNEL
18
17/23PF9945/69 p14-18
18
8/15/03, 1:35 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSING THE LCD TV INSTALLATION MENU
Before you access theTV installation menu, ensure you are inTV mode. If you are not inTV
TV
mode, press the
(TV) button on the remote control to enter intoTV mode.
L
INSTALL
Ñ
MNU
k
MENU
MENU
k
k
É
Ñ
LANGUAGE
•
ENGLISH
B.MELAYU
•AUTO STORE
•MANUAL STORE
•SORT
•CHANNEL EDIT
•
M
1. Enter main menu.
2. Select INSTALL. 3. Enter Install menu.
CHOOSINGTHE MENU LANGUAGE AND
AUTOMATIC TUNING OF LCDTV CHANNELS
The Language menu allows you to set theTV’s on-screen menu to be shown in your desired
language.
Press Button
Result on Screen
4. Enter LANGUAGE mode.
5. Select desired language.
6 Exit LANGUAGE mode.
L
INSTALL
É
Ñ
LANGUAGE
•
ENGLISH
B.MELAYU
•AUTO STORE
•MANUAL STORE
•SORT
or
•CHANNEL EDIT
•
M
L
INSTALL
7. Select AUTO STORE.
•LANGUAGE
É
Ñ
AUTO STORE
•
SEARCH
•MANUAL STORE
•SORT
•CHANNEL EDIT
•
M
8. Start automatic tuning.
INSTALL
L
Ñ
•LANGUAGE
É
•AUTO STORE
•SEARCHING
PLEASE WAIT
CHANNEL FOUND 8
048.31 MHZ
Ñ
MANUAL STORE
•SORT
•CHANNEL EDIT
i
9. When automatic tuning of channels
is completed, exit menu from screen.
M
19
17/23PF9945/69 p19-26
19
3/13/03, 4:52 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSING THE LCD TV INSTALLATION MENU
MANUAL TUNING OF LCD TV CHANNELS
Manual tuning allows you to store each programmes manually.
L
INSTALL
Ñ
MENU
k
MENU
k
MENU
k
É
Ñ
LANGUAGE
•
ENGLISH
B.MELAYU
•AUTO STORE
•MANUAL STORE
•SORT
•CHANNEL EDIT
•
M
1.Enter main menu.
2. Select INSTALL. 3. Enter Install menu.
Press Button
Result on Screen
4. Press button repeatedly until
INSTALL
MANUAL STORE
MANUAL STORE is selected.
L
• COLOUR SYSTEM •
• SOUND SYSTEM
Ñ
É
5. Enter MANUAL STORE menu.
SEARCH
• 196.23MHZ
• CHANNEL
• STORE
M
INSTALL
MANUAL STORE
6. Select SEARCH.
L
• COLOUR SYSTEM •
• SOUND SYSTEM
7. Start manual tuning. Searching stops
once a transmitting channel is found.
Ñ
É
SEARCH
• 196.23MHZ
• CHANNEL
• STORE
M
INSTALL
MANUAL STORE
8. Select CHANNEL.
L
• COLOUR SYSTEM •
• SOUND SYSTEM
• SEARCH
1
2
5
8
0
3
4
6
7
9
9. Key in the desired channel number.
Ñ
É
•
CHANNEL
18 •
• STORE
M
INSTALL
MANUAL STORE
L
10. Select STORE.
• COLOUR SYSTEM •
• SOUND SYSTEM
• SEARCH
11. Store tuned channel.
• CHANNEL
É
Ñ
STORE
•
STORED
M
i
12. Exit menu from screen.
20
17/23PF9945/69 p19-26
20
3/13/03, 4:52 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSING THE LCD TV INSTALLATION MENU
SELECTING THE COLOUR/SOUND SYSTEM
This feature allows you to select your desired COLOUR and SOUND system. If AUTO
is selected, the respective colour and sound system will be automatically selected according
to the transmission system. Note : Select your desired colour and sound system manually if
reception is poor at AUTO mode. If the colour system is selected manually, that is, AUTO
is not selected, the sound system selected should also not be AUTO and vice versa.
Press Button
Result on Screen
Repeat step 1 to step 5 as in “MANUAL TUNING OF CHANNELS”
6. COLOUR SYSTEM is selected.
INSTALL
MANUAL STORE
▲
Enter COLOUR SYSTEM mode.
É
Ñ
COLOUR SYSTEM •
AUTO
PAL
• • SOUND SYSTEM
• SEARCH
SECAM
or
7. Select the desired colour system.
8. Exit from colour system mode.
• CHANNEL
• STORE
▼
INSTALL
MANUAL STORE
• COLOUR SYSTEM
▲
9. Proceed to select the SOUND
Ñ
SOUND SYSTEM
•
AUTO
B/G
B/K
SYSTEM.
• SEARCH
• CHANNEL
• STORE
▼
10. Enter SOUND SYSTEM mode.
INSTALL
MANUAL STORE
• COLOUR SYSTEM
▲
or
11. Select the desired sound system.
É
Ñ
SOUND SYSTEM
•
AUTO
B/G
D/K
• SEARCH
• CHANNEL
• STORE
▼
INSTALL
MANUAL STORE
12. Exit from sound system mode.
▲
• COLOUR SYSTEM •
• SOUND SYSTEM
• SEARCH
13. Press button repeatedly until
STORE is selected.
• CHANNEL
É
Ñ
STORE
•
▼
INSTALL
MANUAL STORE
▲
14. Store selected system.
15. Exit menu from screen.
• COLOUR SYSTEM •
• SOUND SYSTEM
• SEARCH
• CHANNEL
É
Ñ
STORE
•
STORED
▼
i
21
17/23PF9945/69 p19-26
21
8/15/03, 1:37 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSING THE LCD TV INSTALLATION MENU
FINE TUNING OF LCD TV CHANNELS
This feature allows you to adjust picture reception in areas of weak reception.
▲
INSTALL
Ñ
MENU
MENU
MENU
k
k
k
É
Ñ
LANGUAGE
•
ENGLISH
B.MELAYU
•AUTO STORE
•MANUAL STORE
•SORT
•CHANNEL EDIT
•
▼
1.Enter main menu.
2. Select INSTALL. 3. Enter Install menu.
Result on Screen
Press Button
4. Press button repeatedly until
INSTALL
MANUAL STORE
MANUAL STORE is selected.
▲
Ñ
É
COLOUR SYSTEM • AUTO•
• SOUND SYSTEM
• SEARCH
PAL
SECAM
5. Enter MANUAL STORE menu.
• CHANNEL
• STORE
▼
6. Press button repeatedly until
INSTALL
FINE TUNE is selected.
MANUAL STORE
• SOUND SYSTEM
• SEARCH
▲
or
7. Start fine-tuning until desired
picture and sound is obtained.
• CHANNEL
• STORE
É
Ñ
FINE TUNE
▼
INSTALL
MANUAL STORE
8. Select Store.
▲
• COLOUR SYSTEM •
• SOUND SYSTEM
• SEARCH
9. Store last fine-tuned status.
• CHANNEL
É
Ñ
STORE
•
STORED
▼
i
10. Exit menu from screen.
22
17/23PF9945/69 p19-26
22
8/15/03, 1:37 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSING THE LCD TV INSTALLATION MENU
SORTING OF LCD TV CHANNELS
This menu allows you to change channel number of your choice for a particular station.
L
INSTALL
Ñ
MENU
k
MENU
k
MENU
k
É
Ñ
LANGUAGE
•
ENGLISH
B.MELAYU
•AUTO STORE
•MANUAL STORE
•SORT
•CHANNEL EDIT
•
M
1.Enter main menu.
2. Select INSTALL. 3. Enter Install menu.
Result on Screen
Press Button
4. Press button repeatedly until
INSTALL
SORT is selected.
•
LANGUAGE
FROM
TO
EXCHANGE
•
AUTO STORE
MANUAL STORE
SORT
•
L
É
•
M
•
CHANNEL EDIT
5. Enter SORT menu.
INSTALL
L
SORT
FROM
•TO
•EXCHANGE
Ñ
É
•
8
1
2
5
8
0
3
4
6
6. Key in the channel number in the
7
9
FROM column, that is the channel
M
you want to swap from.
7. Select TO.
INSTALL
SORT
L
•
FROM
TO
1
2
5
8
0
3
Ñ
É
•
6
4
6
7
9
8. Key in the channel number in the
•
EXCHANGE
TO column, that is, the channel
M
you want to swap to.
INSTALL
SORT
9. Select EXCHANGE.
L
•
•
Ñ
FROM
TO
10. Activate exchange of channels.
É
EXCHANGE
•
EXCHANGED
M
i
11. Exit menu from screen.
23
17/23PF9945/69 p19-26
23
3/13/03, 4:52 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSING THE LCD TV INSTALLATION MENU
EDITING OF LCD TV CHANNELS
This feature allows you to edit or skip channels which have bad or weakTV signal or channels
that you do not watch often.
Note : Once a channel is skipped, you cannot have access to it by the CHANNEL + or –
button.You can only access the channel by the DIGIT (0 -9) button.
L
INSTALL
Ñ
MENU
MENU
k
k
É
MENU
k
Ñ
LANGUAGE
•
ENGLISH
B.MELAYU
•AUTO STORE
•MANUAL STORE
•SORT
•CHANNEL EDIT
•
M
1.Enter main menu.
2. Select INSTALL. 3. Enter Install menu.
Press Button
Result on Screen
INSTALL
4. Press button repeatedly until
•LANGUAGE
•AUTO STORE
•MANUAL STORE
•SORT
3
CHANNEL EDIT is selected.
4
5
6
7
Ñ
É
CHANNEL EDIT
•
5. Enter channel edit mode.
INSTALL
•LANGUAGE
•AUTO STORE
•MANUAL STORE
•SORT
3
4
5
6
7
or
6. Select the channel you want to skip.
Ñ
É
CHANNEL EDIT
•
INSTALL
7. Activate skipped mode.
8. Exit menu from screen.
•LANGUAGE
•AUTO STORE
•MANUAL STORE
•SORT
3
4
5
6
i
Ñ
É
CHANNEL EDIT
•
7 SKIPPED
How to add back channels
• Repeat steps 1 to 5 as in “Editing of Channels”.
• Select the channel you want to add back by the
(CURSOR UP) or
(CURSOR DOWN) button.
• Press the
(CURSOR RIGHT) button to activate adding back of channel.
i
• Exit menu from screen by the
(OSD) button.
24
17/23PF9945/69 p19-26
24
3/13/03, 4:52 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSING THE LCD TV INSTALLATION MENU
NAMING OF LCD TV CHANNELS
This feature allows you to enter a new name or modify an existing name of a channel for 40
programmes (from 1 to 40) including external channels.
▲
MENU
MENU
k
k
ENU
INSTALL
k
Ñ
Ñ
É
LANGUAGE
•
ENGLISH
B.MELAYU
•AUTO STORE
•MANUAL STORE
•SORT
•CHANNEL EDIT
•
▼
1.Enter main menu.
2. Select INSTALL. 3. Enter Install menu.
Press Button
Result on Screen
4. Press button repeatedly until
▲
▲
INSTALL
NAME is highlighted.
•AUTO STORE
•MANUAL STORE
•SORT
•CHANNEL EDIT
É
Ñ
NAME
•
8
5. Enter NAME mode.
▲
▲
INSTALL
or
6. Select desired preset name and
•AUTO STORE
•MANUAL STORE
•SORT
press
(CURSOR RIGHT)
button to store selected pre-set
name.
•CHANNEL EDIT
É
NAME
• PERSONAL
Ñ
INSTALL
▲
7. If you select PERSONAL, move
•AUTO STORE
•MANUAL STORE
•SORT
to first character slot
•CHANNEL EDIT
É
NAME
• _
Ñ
or
8. Press button repeatedly to cycle
through the characters and select
desired character. Move to next
character slot by the
▲
INSTALL
•AUTO STORE
•MANUAL STORE
•SORT
•CHANNEL EDIT
(CURSOR RIGHT) button
and key in the next character.
(You can enter up to a maximum
of 5 characters)
É
NAME
• BBC_1
Ñ
▲
▲
INSTALL
•AUTO STORE
•MANUAL STORE
•SORT
MENU
9. Store named channel.
•CHANNEL EDIT
É
Ñ
NAME
• PERSONAL
i
10. Exit menu from screen.
25
17/23PF9945/69 p19-26
25
8/15/03, 1:38 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE LCD TV PICTURE/SOUND MENU
The picture and sound menus allow you to make adjustments to the picture and sound. It also
allow you to select and activate other features in the menu.
MENU
1. Press the
2. Use the
(MENU) button to enter main menu.
(CURSOR UP/DOWN) buttons to select the items on the
PICTURE/SOUND menu.
3. Use the
(CURSOR LEFT/RIGHT) buttons to access the sub-menus.
Picture
menu items
Activities
PICTURE
▲
É
Ñ
BRIGHTNESS
38
•
•
•
•
•
COLOUR
Brightness
Increase or decrease brightness level.
Increase or decrease color level.
CONTRAST
SHARPNESS
COLOUR TEMP
Colour
Contrast
Increase or decrease contrast level until
lightest parts of the picture show good
detail.
PICTURE
•
•
•
COLOUR
CONTRAST
SHARPNESS
COLOUR TEMP
INCR.PICTURE
Sharpness
Increase or decrease sharpness level to
improve detail in the picture.
•
COLOUR
Ñ
É
•
ON
•
ColourTemp
Allows you a choice of 3 picture settings
(NORMAL,WARM and COOL).
Note : HUE feature is only
applicable to NTSC
programmes.The HUE item
will not appear on the menu if
programme is in PAL mode.
Incredible
Picture
Select “ON” to allow you to optimise the
total contrast for improved picture quality.
Sound
Activities
SOUND
▲
É
menu items
•
EQUALIZER
BALANCE
AVL
120HZ
500HZ
1500HZ
5KHZ
▼
•
•
•
•
Equalizer
BALANCE
AVL
Allows you a choice of different sound
frequencies.
INCR.SURROUND
10KHZ
Increase or decrease to adjust balance
level.
As variation in signal conditions can result
(AutoVolume a sudden change in volume during in
Leveller)
commercial breaks or channel switching,
selecting the “ON” function will enable
the volume to remain at a standard
volume level.
Incredible
Surround
Allows you to select between Stereo,
DolbyVirtual and Incredible Surround
sound. when transmission is in stereo.
Allows you to select between Spatial and
Mono sound when transmission is in
mono.
26
17/23PF9945/69 p19-26
26
8/15/03, 1:38 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSING THE LCD TV FEATURES MENU
ACTIVATINGTHE TIMER
The Timer feature allows you to set the timer to switch to another channel at a specified
time while you are watching another channel or when the TV is on standby mode.
Note : For the timer to function, the set must not be switched off. Once the set is switched
off, the timer is disabled.
MENU
MENU
k
k
MENU
k
FEATURES
L
É
•TIMER
TIME
M
•
•
•
MODE SELECT
START TIME
STOP TIME
CHANNEL
ACTIVATE
CHILD LOCK
WIDE SCREEN
1. Enter main menu. 2. Select FEATURES. 3. Enter FEATURES menu.
Press Button
Result on TV Screen
FEATURES
TIMER
4. Enter the TIMER menu.
L
É
Ñ
TIME
START TIME
STOP TIME
CHANNEL.
•
--:--
•
•
•
5. Enter TIME mode.
FEATURES
TIMER
L
1
2
5
8
0
3
6. Key in the current time For example, if
the current time is 12:30, key digit 1 and
2 in the hour column, followed by digit
3 and 0 in the minute column.
4
6
Ñ
É
TIME
•
12:30
7
9
M
•
•
•
•
START TIME
STOP TIME
CHANNEL
ACTIVATE
FEATURES
TIMER
MENU
7. Exit from TIME mode.
L
•
Ñ
TIME
É
START TIME
STOP TIME
CHANNEL
ACTIVATE
•
--:--
8. Select START TIME.
•
•
•
FEATURES
TIMER
9. Enter the START TIME mode.
L
TIME
Ñ
1
2
5
8
0
3
É
•
•
•
•
START TIME
STOP TIME
CHANNEL
•
13:30
10. Key in the time you want the
programme to be switched on.
4
6
M
7
9
ACTIVATE
FEATURES
TIMER
MENU
11. Exit from START TIME mode.
L
•
TIME
•
START TIME
STOP TIME
CHANNEL
ACTIVATE
12 Select STOP TIME.
Ñ
É
•
--:--
•
•
27
17/23PF9945/69 p27-38
27
3/13/03, 4:47 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSING THE LCD TV FEATURES MENU
......... ACTIVATINGTHE TIMER
Press Button
Result on TV Screen
13. Enter STOP TIME mode.
FEATURES
TIMER
1
2
5
8
0
3
•
TIME
14. Key in the time you want the
programme to be switched off.
4
6
L
•
START TIME
STOP TIME
CHANNEL
ACTIVATE
7
9
Ñ
É
•
15:30
M
•
•
FEATURES
TIMER
MENU
15. Exit from STOP TIME mode.
L
•
•
•
Ñ
TIME
START TIMEE
STOP TIME
CHANNEL
16. Select CHANNEL.
É
•
3
•
ACTIVATE
M
FEATURES
TIMER
1
2
5
8
0
3
17. Key in the channel you want to
switch to.
4
6
L
7
9
•
•
TIME
START TIMEE
STOP TIME
CHANNEL
•
É
Ñ
•
8
•
ACTIVATE
M
FEATURES
TIMER
18. Select ACTIVATE.
L
•
•
•
TIME
START TIMEE
STOP TIME
PROG. NO
19. Activate timer. You can select
to activate timer by DAILY or
ONCE mode.
•
Ñ
É
ACTIVATE
•
ONCE
FEATURES
TIMER
20. Select DISPLAY.
L
•
•
•
START TIME
STOP TIMEE
CHANNEL
ACTIVATE
DISPLAY
21 Select ON mode if you want to
display the current time on the
TV screen.
•
Ñ
É
•
ON
i
22. Exit menu from screen.
Note
30 seconds before the timer is activated, a message indicating the time left for the channel
switch will appear on the screen. To disable the channel switch, press any button on the
remote control.
28
17/23PF9945/69 p27-38
28
3/13/03, 4:47 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSING THE LCD TV FEATURES MENU
USINGTHE MODE SELECT
This menu allows you to go into FM RADIO, HD or PC mode.
MENU
k
MENU
k
ENU
k
FEATURES
▲
É
•TIMER
TIME
▼
•
•
•
MODE SELECT
START TIME
STOP TIME
CHANNEL
ACTIVATE
CHILD LOCK
WIDE SCREEN
1. Enter main menu. 2. Select FEATURES. 3. Enter FEATURES menu.
Result on TV Screen
Press Button
FEATURES
4. Select MODE SELECT.
▲
▲
•TIMER
É
Ñ
MODE SELECT
• FM RADIO
•
•
CHILD LOCK
WIDE SCREEN
HD
PC
▼
FEATURES
MODE SELECT
5.Enter MODE SELECT menu.
Ñ
FM RADIO
•HD
or
6. Select your desired mode.
•PC
7. Enter selected mode.
RADIO
HD
Note : You can also access directly the FM RADIO. HD and PC modes by the
and
PC
buttons.
29
17/23PF9945/69 p27-38
29
8/15/03, 1:45 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSING THE LCD TV FEATURES MENU
ACTIVATINGTHE CHILD LOCK (ACCESS CODE)
The Child Lock feature allows you to lock channels on your TV Top Controls to prevent your
children from watchingprogrammes you deem undesirable.
Note : You cannot have access to the locked channels via the top controls of the TV set once
the channels are locked. You can only have access to the locked channels via the remote
control. Keep the remote control out of reach so as to prevent your children from having
access to it.
MENU
MENU
MENU
k
k
k
FEATURES
L
É
•TIMER
TIME
M
•
•
•
MODE SELECT
START TIME
STOP TIME
CHANNEL
ACTIVATE
CHILD LOCK
WIDE SCREEN
1. Enter main menu. 2. Select FEATURES. 3. Enter FEATURES menu.
Press Button
Result on TV Screen
4. Select CHILD LOCK.
FEATURES
•
TIMER
ACCESS CODE
--:--
•
MODE SELECT
CHILD LOCK
WIDE SCREEN
L
É
•
M
•
FEATURES
5. Enter ACCESS CODE mode.
•
TIMER
ACCESS CODE
X X X X
INCORRECT
•
MODE SELECT
CHILD LOCK
WIDE SCREEN
Ñ
1
2
5
8
0
3
6. Key in access code 0711
(0711 is the default access code).
A message INCORRECT will
appear.
•
4
6
7
9
FEATURES
TIMER
•
ACCESS CODE
X X X X
CORRECT
1
2
3
7. Key in 0711 the second time.
When the message CORRECT
appears, the CHILD LOCK
menu is now accessible.
• MODE SELECT
4
5
8
0
6
Ñ
CHILD LOCK
WIDE SCREEN
7
9
•
FEATURES
CHILD LOCK
L
Ñ
É
LOCK CHANNEL
•
2
3
4
5
6
•CHANGE CODE
•CLEAR ALL
You can now proceed to change
the access code of your choice.
30
17/23PF9945/69 p27-38
30
3/13/03, 4:47 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSING THE LCD TV FEATURES MENU
ACTIVATINGTHE CHILD LOCK (CHANGE CODE)
Press Button
Result on TV Screen
8. Select CHANGE CODE.
FEATURES
CHILD LOCK
•LOCK CHANNEL ENTER
Ñ
CHANGE CODE
•CLEAR ALL
NEW CODE
– – – –
9. Enter CHANGE CODE mode.
FEATURES
CHILD LOCK
1
2
5
8
0
3
•LOCK CHANNEL ENTER
10. Key in the access code of your
choice.
4
6
Ñ
CHANGE CODE
•CLEAR ALL
NEW CODE
x x x x
7
9
1
2
3
11. Confirm access code.
4
5
8
0
6
FEATURES
CHILD LOCK
7
9
•
LOCK CHANNEL CONFIRM
Ñ
CHANGE CODE
CLEAR ALL
CODE
x x x x
•
FEATURES
CHILD LOCK
When the new code is confirmed,
the message CORRECT will
appear.
•LOCK CHANNEL CONFIRM
Ñ
CHANGE CODE
•CLEAR ALL
CODE
x x x x
CORRECT
i
12. Exit menu from screen.
Note : After you have exit menu from screen and you want to enter child lock menu again ,
you need to key the new access code only once. If you have forgotten the new access code,
key in 0711 twice to enter the child lock menu. Upon entering the child lock menu, you can
proceed to change code again.
31
17/23PF9945/69 p27-38
31
3/13/03, 4:47 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSING THE LCD TV FEATURES MENU
ACTIVATINGTHE CHILD LOCK (LOCK CHANNEL)
ENU
k
MENU
k
MENU
FEATURES
L
k
É
•TIMER
TIME
M
•
•
•
MODE SELECT
START TIME
STOP TIME
CHANNEL
ACTIVATE
CHILD LOCK
WIDE SCREEN
1. Enter main menu. 2. Select FEATURES. 3. Enter FEATURES menu.
Press Button
Result on TV Screen
4. Select CHILD LOCK .
FEATURES
•
TIMER
ACCESS CODE
--:--
•
MODE SELECT
CHILD LOCK
WIDE SCREEN
L
É
•
M
•
5. Enter ACCESS CODE mode.
FEATURES
TIMER
•
ACCESS CODE
X X X X
CORRECT
6. Key in access code .
• MODE SELECT
•
CHILD LOCK
WIDE SCREEN
Ñ
FEATURES
7. Enter LOCK CHANNEL mode.
CHILD LOCK
Ñ
É
LOCK CHANNEL•
2
3
4
5
6
•CHANGE CODE
•CLEAR ALL
or
8. Select the channel you want to block.
FEATURES
CHILD LOCK
LOCK CHANNEL
Ñ
É
•
3F
4
5
6
7
9. Activate blocking of channel. A
keylock symbol will appear beside
the channel number indicating that
it is locked.
•CHANGE CODE
•CLEAR ALL
i
10. Exit menu from screen.
Note : You cannot have access to the locked channels via the top controls of the TV set.
You can only have access to the locked channels via the remote control.
When AV1 source is locked, CV1 source is automatically locked. Like-wise, if CV1 source is
locked, AV1 source is also automatically locked as they share the same audio input.
If you attempt to enter the INSTALL menu after locking a channel, a message
“Enter ACCESS CODE” will appear on the screen. You need to enter the ACCESS
CODE to enable you to enter the INSTALL menu.
32
17/23PF9945/69 p27-38
32
3/13/03, 4:48 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSING THE LCD TV FEATURES MENU
ACTIVATINGTHE CHILD LOCK (CLEAR ALL)
To unlock channels that you have locked, enter the Child Lock menu and activate the
CLEAR ALL mode.
MENU
k
MENU
FEATURES
L
MENU
k
k
É
•TIMER
TIME
M
•
•
•
MODE SELECT
START TIME
STOP TIME
CHANNEL
ACTIVATE
CHILD LOCK
WIDE SCREEN
1. Enter main menu. 2. Select FEATURES. 3. Enter FEATURES menu.
Press Button
Result on TV Screen
4. Select CHILD LOCK.
FEATURES
•
TIMER
ACCESS CODE
--:--
•
MODE SELECT
CHILD LOCK
WIDE SCREEN
L
É
•
M
•
5. Enter ACCESS CODE mode.
FEATURES
TIMER
•
ACCESS CODE
X X X X
CORRECT
• MODE SELECT
6. Key in access code.
•
CHILD LOCK
WIDE SCREEN
Ñ
FEATURES
CHILD LOCK
L
7. Press button repeatedly until
•LOCK CHANNEL
CLEAR ALL is selected.
•CHANGE CODE
Ñ
É
CLEAR ALL
•
8. Activate clearing of all locked
channels.
FEATURES
L
CHILD LOCK
•LOCK CHANNEL
•CHANGE CODE
Ñ
É
CLEAR ALL
•CLEARED
i
9. Exit menu from screen.
Note
You can also unlock individual channel by the LOCK CHANNEL menu
• Repeat step 1 to 7 as in “ACTIVATING THE CHILD LOCK (LOCK CHANNEL)”.
• Select the channel you want to unlock by the
buttons.
or
(CURSOR UP / DOWN)
• Press the
disappear).
(CURSOR RIGHT) button to unlock channel (the keylock symbol will
33
17/23PF9945/69 p27-38
33
3/13/03, 4:48 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE SCREEN FORMAT
Screen Format function allows you a choice of different formats for your viewing pleasure,
namely : - 4:3, Zoom 14:9, Zoom 16:9, Subtitle Zoom, Superwide, Widescreen and
Full Screen.
Enter the FEATURES menu and select WIDE SCREEN to cycle through the various
screen formats and select the format of your choice. You can also use
q
(SCREEN
FORMAT) or buttons to cycle through the various screen formats.
Definition of Screen Formats
4:3 Mode
This picture is reproduced in 4:3 format and a black band is displayed
on either side of the picture.
Zoom 14:9 Mode
This picture is enlarged to 14:9 format, a thin black band remains on
both sides of the picture.
Zoom 16:9 Mode
This picture is enlarged to 16:9 format. This mode is recommended
when displaying pictures which have black bands at the top and bottom
(letterbox format).
Subtitle Zoom Mode
This mode is use to display 4:3 pictures using the full surface of the
screen leaving the subtitles visible.
Superwide Mode
This mode is use to display 4:3 pictures using the full surface of the
screen by enlarging the sides of the picture.
Widescreen Mode
This mode restores the correct proportions of pictures transmitted
in 16:9 using full screen display.
Note : If you display a 4:3 picture in this mode, it will be enlarged
horizontally.
Full Screen
Select this mode when displaying pictures have black bands at the top
and bottom or at the left and right to enable you to enjoy full display
of the picture on the screen.
34
17/23PF9945/69 p27-38
34
3/13/03, 4:48 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ACTIVATING THE SLEEPTIMER
Sleeptimer function allows you to select a time period in which the set will switch to standby
mode automatically upon reaching the selected time period. You have a choice of time period
starting from OFF up to a maximum of 240 minutes
1. Press the
time period.
(SLEEPTIMER) button to display the
SLEEP OFF
2. Press the
(SLEEPTIMER) button repeatedly to
cycle through the various time periods and select the
time period of your choice.
Note
• During the last minute of a Sleep time setting, an
on-screen countdown will be displayed. Pressing any
button on the remote control during the countdown
will cancel the Sleep-timer.
SLEEP 240
• During the last 10 seconds of a Sleep timer setting,
an on-screen display will read Goodbye.
ACTIVATING THE ACTIVE CONTROL
This feature automatically adjust settings for optimal picture quality continuously under any
signal conditions. You have a choice of 4 modes : ACTIVE CONTROL OFF, ACTIVE
CONTROL MIN, ACTIVE CONTROL MED and ACTIVE CONTROL MAX
HOW TO ACCESS AND SELECT THE ACTIVE CONTROL MODE
ACTIVE
1. Press the
(ACTIVE CONTROL) button
CONTROL
repeatedly to cycle through the various four
ACTIVE CONTROL modes and select your
desired mode.
ACTIVE CTRL OFF
ACTIVE CTRL MIN
i
2. Press
(OSD) button to exit menu from screen
or wait for the On-Screen Display to time out.
ACTIVE CTRL MAX
35
17/23PF9945/69 p27-38
35
8/15/03, 1:47 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ACTIVATING THE LCD TV SMART PICTURE / SOUND CONTROL
SMART PICTURE feature offers you a choice of 5 picture settings, namely, RICH,
NATURAL, SOFT, PERSONAL and MULTIMEDIA.
SMART SOUND feature offers you a choice of 4 sound settings, namely, THEATRE,
MUSIC, VOICE and PERSONAL.
SMART
SMART
Press
(SMART PICTURE) or
(SMART SOUND) button repeatedly to cycle
through the settings to select your desired mode.
Definition of Picture Settings
PERSONAL
: Picture settings are set to your
preference.
PERSONAL
RICH
RICH
: Emphasize very vibrant colours.
(Suitable for AV mode in
brightly-lit room)
: Emphasize original colours.
: Emphasize “warm” colours.
(Suitable for dimly-lit room
condition and gives cinema-like
effect when light is switched off).
BRIGHTNESS
COLOR
48
41
BRIGHTNESS
42
NATURAL
SOFT
COLOR
30
NATURAL
SOFT
BRIGHTNESS
43
COLOR
30
MULTIMEDIA : Emphasize “soft” colours. (Suitable
for playing computer games,
BRIGHTNESS
43
COLOR
27
surfing, etc.)
MULTIMEDIA
BRIGHTNESS
45
Note : The PERSONAL setting is the setting that
you set up using the Picture menu in the main menu.
This is the only setting in the Smart Picture settings
that can be changed. All the other settings are
pre-set at the factory.
COLOR
PICTURE
SHARPNESS
30
71
3
Definition of Sound Settings
PERSONAL
VOICE
PERSONAL : Sound settings are set to your
120HZ
20
preference.
VOICE
MUSIC
THEATRE
: Emphasize high tone. (Treble boosted)
: Emphasize low tone. (Bass boosted)
120HZ
5
: Emphasize sensation to action.
(Bass and Treble boosted)
120HZ
MUSIC
20
THEATRE
Note : The values shown in the Picture/Sound
Setting diagrams are sample values only. Your
television’s values may vary and display different
numbers.
120HZ
26
500HZ
6
1500HZ
5KHZ
6
17
19
10KHZ
36
17/23PF9945/69 p27-38
36
8/15/03, 1:47 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE TELETEXT
If a TV channel broadcast contains teletext information, each channel that broadcasts
teletext transmits a page (index page) with information on how to use the teletext system,
usually on page 100. The system transmitted is indicated in the option line at the bottom
of the screen.
& On/Off teletext
and
Press the button once to switch on
teletext display. (A channel in which
teletext is being transmitted must be
selected).
2
MODE
A/CH
VCR
DVD
v
Superimpose
teletext page
over TV
æ
o
‘
&
Press the button the second time
superimpose the teletext page over
the TV programme.
X
g
b
programme
SMART
MENU
ACTIVE
SMART
CONTROL
b
Press the button the third time
to exit teletext mode.
k
é Selecting a
Key in the required teletext page
(3 digits). The page number is
“
é
teletext page
MUTE
¬
displayed at the top left hand corner
of the screen. When the teletext
page is located, the counter stops
searching. If the counter keeps
searching, it means that the page is
not available for selection. If you
make a mistake in keying the page
number, you have to complete
keying the 3-digit number before
re-keying the correct page number.
V
CH
OK
PC
RADIO
TV
HD
1
2
5
8
0
3
4
6
1
2
5
8
0
3
6
7
9
4
7
9
q
i
“ Accessing
a teletext
page
Press the CHANNEL + button to
display the next page and the
CHANNEL – button to
CH
display the previous page.
(
‘ Direct Access to The 4-colour buttons allow you to
an item or
corresponding
pages
access directly an item or
corresponding pages.
æ
o
( Main Index
Press the button to return to the
main index page.
i
37
17/23PF9945/69 p27-38
37
3/13/03, 4:48 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE TELETEXT
§ Dual Page
Press button to enable you to display
dual page text.
Text
2
MODE
A/CH
X
VCR
DVD
v
æ
o
ç
è
X
g
b
è Hold
When a dual page is displayed, use this
button to toggle between the dual
page. Once an active page is
selected, the other page will be on hold
mode. If the page has sub-pages, use
the Cursor Right or Left button to
access the next or previous page
g
SMART
MENU
ACTIVE
SMART
§
!
CONTROL
k
!
MUTE
¬
V
CH
OK
PC
RADIO
TV
HD
! Selecting a
For a teletext page with sub-pages,
press the Cursor Left or Right
button to access the previous sub-
page or the next subpage.
1
2
5
8
0
3
6
sub-page
4
7
9
q
i
ç Reveal/
Press the button once to reveal hidden
information (solutions to puzzles,
riddles, etc). Press the button the
second time to conceal information.
This button is applicable only to
Conceal
v
teletext page with puzzles, riddles, etc.)
How to select your favourite page
This feature allows you select 4 of your favourite or most commonly viewed page and stored
them in the favourite page selection. You can then access directly your favourite page by the
colour buttons without having to key in the page number.
b
1. Press the
(TELEXTEXT ON/OFF) button to enter teletext mode.
MENU
2. Press the
(MENU) button to enter favourite page selection. Note : The colour
alphabets at the bottom of the screen is now changed to page numbers.
1
2
5
8
0
3
4
6
3. Key in your favourite page by the
7
9
(DIGIT 0 -9) buttons.
i
4. Press the
page.
(OSD) button followed by your desired colour button to store your favourite
5. Repeat step 3 to 4 to select and store other favourite pages.
MENU
6. To exit Favourite page mode, press
(MENU) button.
b
7. Press the
(TELEXTEXT ON/OFF) button twice to exit teletext mode.
38
17/23PF9945/69 p27-38
38
8/15/03, 1:49 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSING THE FM RADIO INSTALLATION MENU
ThisTV also provides you with the FM RADIO for your listening pleasure. To enable you to
access the FM RADIO mode, you must connect the cable from FM Antenna socket to the
FM Radio mains.
Press Button
Result on TV Screen
RADIO
1. Enter into FM Radio mode.
Ñ
É
•
SOUND
FEATURES
INSTALL
EQUALIZER
BALANCE
AVL
M
•
•
MENU
2. Enter FM RADIO main menu.
INCR.SURROUND
3. Press button button repeatedly
until INSTALL is highlighted.
•
SOUND
FEATURES
INSTALL
LANGUAGE
AUTO STORE
MANUAL STORE
SORT
•
L
É
•
NAME
4. Enter INSTALL menu.
L
INSTALL
Ñ
É
Ñ
LANGUAGE
•
ENGLISH
B.MELAYU
•AUTO STORE
•MANUAL STORE
•SORT
or
5. Press button button repeatedly to
scroll through the available FM Mode
On-screen options.These options
•NAME
•
M
include LANGUAGE, AUTO STORE,
MANUAL STORE, SORT and NAME.
L
INSTALL
•LANGUAGE
É
LANGUAGE – Choose to view the
On-screen menu in your desired language.
Ñ
AUTO STORE
•
SEARCH
•MANUAL STORE
•SORT
•NAME
•
AUTO STORE – Allows you to search
the FM antenna signal and store any FM
channel it finds in theTV’s memory.
M
INSTALL
•
LANGUAGE
AUTO STORE
MANUAL STORE
SORT
SEARCH
CHANNEL
STORE
MANUAL STORE – Allows you to
manually tune any available FM signals.
•
L
É
•
M
•
•
SORT– Allows you to rearrange your
stored FM stations in the order you
prefer.
NAME
INSTALL
•
LANGUAGE
FROM
TO
EXCHANGE
•
AUTO STORE
MANUAL STORE
SORT
NAME – Allows you to apply a name
to your programmed FM radio stations.
Add your own personal name or choose
one from the predefined list.
•
L
É
•
M
•
NAME
INSTALL
L
•LANGUAGE
•AUTO STORE
•MANUAL STORE
•SORT
6. Adjust or select items within the
highlighted feature sub-menu.
É
Ñ
NAME
•
PERSONAL
i
7. Exit menu from screen.
39
17/23PF9945/69 p39-51
39
3/13/03, 4:44 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE FM RADIO SOUND MENU
The Sound menu allows you to make adjustments to the sound.
Note: Ensure you are in FM RADIO mode before you access FM RADIO main menu.
MENU
MENU
k
k
SOUND
▲
É
•
EQUALIZER
BALANCE
AVL
120HZ
500HZ
1500HZ
5KHZ
▼
•
•
•
•
INCR.SURROUND
10KHZ
MENU
1. Press
button to enter FM RADIO
2. Press
button to enter the
main menu. SOUND option is
SOUND menu.
highlighted.
3. In the SOUND menu, press
or
buttons to select the various SOUND menu items and
make your desired adjustments and access the sub-menus.
button to adjust level or select desired setting.
4. Use the
i
5. Press
button to exit menu from screen.
Sound menu items
Activities
EQUALIZER
BALANCE
Allows you a choice of different sound frequencies.
Increase or decrease to adjust balance level.
AVL
(AutoVolume
Leveller)
As variation in signal conditions can result a sudden
change in volume during FM channel switching, selecting
the “ON” function will enable the volume to remain at a
standard volume level.
INCREDIBLE
SURROUND
Allows you to select between Incredible Surround
DolbyVirtual or Stereo sound when transmission is in
stereo. Allows you to select between Spatial and Mono
sound when transmission is in mono.
USING THE FM RADIO SMART SOUND CONTROL
FM RADIO SMART SOUND feature offers you a choice of 5 sound settings, namely,
ROCK, POP, CLASSICAL, JAZZ, and PERSONAL.
RADIO
1) Press the
(FM RADIO) button to enter FM RADIO mode.
SMART
2) Press
(SMART SOUND) button repeatedly to cycle through the various settings
and select your desired sound mode.
i
3) Press the
(OSD) button to exit On-Screen display .
40
17/23PF9945/69 p39-51
40
8/25/03, 5:30 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSING THE FM RADIO FEATURES MENU
ACTIVATINGTHE TIMER
TheTimer feature allows you to set the timer to switch to another FM channel at a specified
time while you are listening another FM channel. For the timer to function, the set must not be
switched off. Once the set is switched off, the timer is disabled. Note : Ensure you are in FM
RADIO mode before you access FM RADIO main menu.
ENU
k
MENU
MENU
k
k
FEATURES
▲
É
•TIMER
TIME
▼
▲
•
•
MODE SELECT
START TIME
STOP TIME
CHANNEL
ACTIVATE
SCREENSAVER
1.Enter FM RADIO main menu. 2. Select FEATURES. 3. Enter FEATURES menu.
Use the Menu and Cursor Up, Down, Right and Left buttons to access the Timer
menu to : – select the items. make the following adjustments or activate the timer.
1
2
5
8
0
3
FEATURES
TIMER
4
6
TIME
: Use the
7
9
buttons to key in the
▲
Ñ
É
TIME
• 12:30
current time to enable functioning
of the timer feature.
▼
• START TIME
FEATURES
TIMER
1
2
5
8
0
3
4
6
▲
STARTTIME : Use the
7
9
buttons to key in the
TIME
Ñ
É
• START TIME • 13:30
▼
time you want the channel to be
switched on.
• STOP TIME
FEATURES
TIMER
1
2
5
8
0
3
• TIME
4
6
STOP TIME : Use the
7
9
buttons to key in the
▲
• START TIME
Ñ
É
STOP TIME
• 15:30
time you want the program to be
switched off.
▼
• CHANNEL
FEATURES
TIMER
▲
1
2
5
8
0
3
• TIME
4
6
CHANNEL : Use the
7
9
buttons to key in the
• START TIMEE
• STOP TIME
É
Ñ
FM channel number.
CHANNEL
•
FM8
•
FEATURES
TIMER
ACTIVATE : Use the Cursor buttons to select
between the Once and Daily mode
to activate the timer.
▲
• TIME
• START TIMEE
• STOP TIME
• CHANNEL
Ñ
É
ACTIVATE
•
ONCE
DISPLAY
: Use the Cursor buttons to select
the ON option to display current
time on screen.
FEATURES
TIMER
▲
• START TIMEE
• STOP TIMEE
• CHANNEL
• ACTIVATE
Ñ
É
DISPLAY
•
ON
41
17/23PF9945/69 p39-51
41
8/25/03, 5:30 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSING THE FM RADIO FEATURES MENU
USINGTHE MODE SELECT
This feature allows you to go into TV, HD or PC mode. Note : Ensure you are in FM
RADIO mode before you access FM RADIO main menu.
MENU
k
MENU
k
MENU
FEATURES
▲
k
É
•TIMER
TIME
▼
•
•
MODE SELECT
START TIME
STOP TIME
CHANNEL
ACTIVATE
SCREENSAVER
1.Enter FM RADIO main menu. 2. Select FEATURES. 3. Enter FEATURES menu.
Press Button
Result on Screen
4. Select MODE SELECT.
FEATURES
•TIMER
TV
HD
PC
Ñ
MODE SELECT
•
SCREENSAVER
5. Enter MODE SELECT menu.
6. Select your desired mode.
7. Enter selected mode.
FEATURES
MODE SELECT
or
Ñ
TV
▲
•HD
•PC
TV
HD
PC
Note : You can also access directly the TV, HD and PC modes by the
buttons.
ACTIVATINGTHE SCREENSAVER
Repeat Steps 1 to 3 as in “Using the Mode Select”.
FEATURES
4. Select SCREENSAVER.
•
TIMER
MODE SELECT
SCREENSAVER
•
Ñ
ON
or
5. Select ON option to activate
screensaver mode.
FEATURES
▲
•
•
•
TIMER
MODE SELECT
SCREENSAVER
É
•
ON
i
6.Exit menu from screen.
▼
42
17/23PF9945/69 p39-51
42
8/25/03, 5:30 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSING THE PC MODE
ThisTV also allows you use yourTV as a PC monitor. To enable you to access PC mode in the
TV, you must connect the following :–
& Connect DC input terminal to the AC adaptor.
é Connect the Mains Plug from the AC adaptor to the AC outlet.
“ Connect Audio L and R output of your PC to the Audio IN L and R of yourTV.
PC
‘ Press
button to enter into PC mode.
MENU
( Press
button to enter into the PC Main Controls Menu.
Using theThe 4 buttons
,
,
and
(Cursor Down, Up, Left and Right)
on the remote control allow you to select the desired menu item, make adjustments
and access the sub-menus.
The PC Main Controls menu allows you to access for the followiong menu items :
– AUDIO SELECTION
Allows audio selection between the PC , TV/Source and FM
Radio.
– BRIGHTNESS and
CONTRAST
Allows you to increase or decrease Brightness and Contrast
level.
– ADJUST COLOR
Adjusts the color temperature of the picture. 3 settings
are available (Normal,Warm, Cool or Personal).
– VIDEO NOISE
Allows you to eliminate the vertical bars by using the Clock
adjustment of Video Noise. Also allows you to eliminate the
horizontal bars by using the Phase Adjustment of VIDEO
NOISE in the Main Controls.
– ADJUST POSITION
– AUTO ADJUST
Allows you to adjust the horizontal and vertical image position.
Allows you to do automatic adjustments of settings.
æ
– PIP CONTROLS
Press
(PIP ON/OFF) button to allow you go into PIP mode.
PIP Controls allows to change the Size and Position of the
subscreen.
– MODE SELECT
Allows you enter into TV, HD or FM Radio mode.
– RESET TO FACTORY Allows you to reset all settings to Default Factory settings
SETTINGS
– VIEW FORMATS
Allows you to choose between Native and Wide Screen
formats.
43
17/23PF9945/69 p39-51
43
8/25/03, 5:30 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
PC DISPLAY SETUP
When you are using theTV as a Computer Display, follow the procedures for PC Display setup.
Note : DifferentWindow versions may give different PC Display setup procedures.
PC
1. Press
(PC) button on the remote control to enter PC mode.
Note :The LCDTV will go on standby mode automatically within 5 seconds if no PC
signal is detected.
2. Click on “Settings” on theWindow Start menu.
3. Select “Control Panel”.
4. Click on “Display” and a display dialog-box will appear.
5. Navigate to the “Settings” tab on the display dialog-box.
6. Select the required “Colours and Resolution” and click “OK”.
7. Dialog-box “..Does Not Support..’ message will be displayed if set does not support settings.
USING THE PC PICTURE-IN-PICTURE FEATURE
Picture-in-Picture feature allows you to call up a subscreen within your main screen.
How to switch on the Picture-in-Picture Window screen
PC
1. Press
(PC) button on the remote control to enter PC mode.
æ
2. Press the
(PIP On/Off) button to switch on Picture-in-Picture screen (A large size
PIP screen appears).
æ
æ
æ
3. Press the
4. Press the
5. Press the
(PIP On/Off) button a second time to change PIP screen to a medium size.
(PIP On/Off) button a third time to change to a small size.
(PIP On/Off) buuton a fourth time to exit PIP screen.
Note : PC mode supports Picture-in-Picture with PC refresh rate not more than 60Hz.
How to position the Picture-in-Picture screen
æ
2. In PC mode, press the
(Picture-in-Picture On/Off) button to switch on Picture-in-
Picture screen.
o
3. Press the
(PIP Position) button repeatedly to position PIP screen to the position of
your choice. (You can choose to position your PIP screen to be on the top left/top right/
bottom right or bottom left hand corner).
æ
4. Press the
(PIP On/Off) button three times to exit PIP screen.
44
17/23PF9945/69 p39-51
44
3/13/03, 4:44 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
PC MODES SUPPORT
Note : If the signal from the system does not equal the PC Modes Support, there may be no
video or corrupted video. Proceed to change the system to the right resolution that the PC
mode support.
No.
Resolution
Refresh Vertical
Horizontal
Sync
Horizontal
Polarity
Pixel
Frequency
Rate
60 Hz
67 Hz
72 Hz
75 Hz
85 Hz
70 Hz
56 Hz
60 Hz
72 Hz
75 Hz
85 Hz
75 Hz
60 Hz
70 Hz
75 Hz
85 Hz
75 Hz
60 Hz
60 Hz
75 Hz
Sync
N
N
N
N
N
P
1
640 x 480
31,500 kHz
35,000 kHz
37,900 kHz
37,500 kHz
43,300 kHz
31,469 kHz
35,100 kHz
37,900 kHz
48,100 kHz
46,900 kHz
53,700 kHz
49,700 kHz
48,400 kHz
56,500 kHz
60,000 kHz
68,700 kHz
67,500 kHz
60,000 kHz
64,000 kHz
80,000 kHz
N
N
N
N
N
N
P
25,175 MHz
30,240 MHz
31,500 MHz
31,500 MHz
36,000 MHz
28,322 MHz
36,000 MHz
40,000 MHz
50,000 MHz
49,500 MHz
56,250 MHz
57,300 MHz
65,000 MHz
75,000 MHz
78,750 MHz
94,500 MHz
108,000 MHz
108,000 MHz
108,000 MHz
135,000 MHz
2
3
4
5
6
720 x 400
800 x 600
7
P
8
P
P
9
P
P
10
11
12
13
14
15
16
17
18
19
20
P
P
P
P
832 x 624
P
P
1024 x 768
N
N
P
N
N
P
P
P
1152 x 864
1280 x 960
1280 x 1024
P
P
P
P
P
P
P
P
45
17/23PF9945/69 p39-51
45
3/13/03, 4:44 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSING THE HD (HIGH DEFINITION) MODE
The HD mode offers you Picture and Sound adjustments, Mode Select and Lock Channel
feature.
USINGTHE HD PICTURE / SOUND MENU
The HD Picture and Sound menus allow you to make adjustments to the picture and sound. It
alsoallow you to select and activate other features in the menu.
HD
1. Press the
2. Press the
3. Use the
(HD) button to enter HD mode.
MENU
(MENU) button to enter main menu.
(CURSOR UP/DOWN) buttons to select the items on the
HD PICTURE/SOUND menu.
4. Use the
(CURSOR LEFT/RIGHT) buttons to access the sub-menus.
PICTURE
Picture
menu items
Activities
Ñ
É
BRIGHTNESS
38
COLOR
CONTRAST
SHARPNESS
HUE
COLOR TEMP
FORMAT
Brightness
Increase or decrease brightness level.
Increase or decrease color level.
Color
Contrast
Increase or decrease contrast level until
lightest parts of the picture show good
detail.
PICTURE
COLOUR
CONTRAST
SHARPNESS
HUE
Sharpness
Increase or decrease sharpness level to
improve detail in the picture.
COLOR TEMP
É
Ñ
FORMAT
FULL SCREEN
Hue
Imcrease or decrease hue level
ColorTemp
Allows you a choice of 3 picture settings
(NORMAL,WARM and COOL).
Note : HUE feature is only
applicable to NTSC
programmes.The HUE item
will not appear on the menu if
programme is in PAL mode.
Format
Allows you to choose between FULL
SCREEN and WIDE SCREEN formats.
SOUND
Sound
menu items
Activities
EQUALIZER
Ñ
É
120HZ
500HZ
1500HZ
5KHZ
10KHZ
BALANCE
AVL
-12
Equalizer
BALANCE
AVL
Allows you a choice of different sound
frequencies.
Increase or decrease to adjust balance
level.
SOUND
EQUALIZER
As variation in signal conditions can result
120HZ
500HZ
1500HZ
5KHZ
10KHZ
BALANCE
AVL
(AutoVolume a sudden change in volume during in
Leveller)
commercial breaks or channel switching,
selecting the “ON” function will enable
the volume to remain at a standard
volume level.
É
Ñ
ON
46
17/23PF9945/69 p39-51
46
3/13/03, 4:44 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSING THE HD (HIGH DEFINITION) MODE
USINGTHE HD MODE SELECT
The HD MODE SELECT feature allows you to switch to TV MODE, FM RADIO MODE,
or PC MODE.
MENU
1. In HD mode, press the
HD main menu.
(MENU) button to enter
MAIN
PICTURE
SOUND
MODE SELECT
LOCK CHANNEL
2. Press the
(CURSOR DOWN) button
repeatedly until MODE SELECT is highlighted.
3. Use the
(CURSOR /RIGHT) button to
MODE SELECT
MODE SELECT menu
TV MODE
RADIO MODE
PC MODE
HD1
4. Use the
(CURSOR UP/DOWN) buttons
to select TV MODE, FM RADIO MODE or
PC MODE.
5. Press
(CURSOR RIGHT) button to activate selected HD mode.
USINGTHE HD LOCK CHANNEL
The HD LOCK CHANNEL feature allows you to lock the HD mode channel to censor the
viewing of programme not suitable for children.
MENU
1. In HD mode, press the
main menu.
(MENU) button to enter
MAIN
PICTURE
SOUND
MODE SELECT
LOCK CHANNEL
ACCESS CODE
----
2. Use the
(CURSOR DOWN) button
repeatedly until LOCK CHANNEL is highlighted..
1
2
5
8
0
3
4
6
3. Use the
7
9
(DIGIT) buttons to enter the four digit
MAIN
Access Code to set uo the LOCK CHANNEL function.
PICTURE
SOUND
MODE SELECT
LOCK CHANNEL
Ñ
É
4. Use the
(CURSOR /RIGHT) button to select
ON or OFF options. If ON option is selected, the
HD channel will not allow viewing of programmes.
ON
i
5. Press
(OSD) button to exit menu from screen.
47
17/23PF9945/69 p39-51
47
3/13/03, 4:44 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE CALLING SERVICE (TV MODE)
Below is a list of frequently occurred symptoms. Before you call for service, make these simple
checks. Some of these symptoms can easily be rectified if you know what to do.
Symptom
No power
What you should do
• Check whether adaptor is connected properly into cinch.
• Check theTV’s AC power cord is plugged into the mains
socket. If there is still no power, disconnect plug.Wait for
60 seconds and re-insert plug. Switch on theTV again.
TV
No picture
• Check whether transmission is inTV mode. Press
button) on remote control to confirm.
(TV
• Check the antenna connection at the rear of theTV.
• PossibleTV station problem.Try another channel.
Good picture
but no sound
• Try increasing the volume.
• Check that the sound is not muted. If it is muted, press the
Mute button on the remote control to restore sound.
• Chek that your headphone is not connected.
Good sound but poor
colour or no picture
• Try increasing the contrast and brightness setting.
• Check antenna connection at the rear of theTV.
Snowish picture and
noise
Horizontal dotted lines
• Possible electrical interference e.g. hairdryer, vacuum
cleaner, etc. Switch off appliances.
Double images or
“Ghost” images
• Possible poor positioning of antenna. Using a highly
directional antenna may improve reception.
TV not responding to
remote control handset
• Check life span of batteries of remote control handset.
• Aim remote control handset directly at remote control
sensor lens on theTV.
An after-image appears
• If an image remains in the screen for an extended period of
time, it may be imprinted in the screen and leave an after-
image.This usually disappears after a few hours.
An after-image remains
after the power has been
turned off
• This is characteristic of liquid crystal and is not caused by a
malfunction or deterioration of the liquid crystal.This after-
image will disappear after a set amount of time.
48
17/23PF9945/69 p39-51
48
3/13/03, 4:44 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE CALLING SERVICE (PC / FM RADIO MODE)
Below is a list of frequently occurred symptoms when you are in PC /FM RADIO mode .
Before you call for service, make these simple checks. Some of these symptoms can easily be
rectified if you know what to do.
Symptom
What you should do
Incorrect Display position
• Adjust the image position using the Horizontal Position and/
orVertical Position in the PC Mains Controls menu.
NoVideo Input
• Make sure the monitor cable is properly connected to the
PC input (VGA) at the rear of theTV.
• Check whether the monitor cable has bent pins.
Vertical flicker appears
Horizontal flicker appears
Screen too bright or dark
Cannot access FM radio
• Try eliminating the vertical bars by using the Clock
Adjustment of VIDEO NOISE in the Main Controls.
• Try eliminating the horizontal bars by using the Phase
Adjustment of VIDEO NOISE in the Main Controls.
• Try adjusting the contrast and brightness in the Main
Controls.
• Check whether the connection from FM Antenna socket to
the FM Radio mains is done correctly.
49
17/23PF9945/69 p39-51
49
3/13/03, 4:44 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
17PF9945
432 mm
23PF9945
584 mm
Picture tube screen size
Audio Output
2 x 3 W
2 x 5W
TV System
NTSC M
PAL B/G
PAL D/K
PAL I
SECAM B/G
SECAM D/K
SECAM K1
Playback System
NTSC 3.58, NTSC 4.43, PAL 60
Set Dimensions without stand
Length
Height
Depth
517 mm
301 mm
65 mm
704 mm
373 mm
76 mm
Set Dimensions with stand
Length
Height
Depth
517 mm
340 mm
177 mm
704 mm
419 mm
195 mm
NetWeight of Set with stand
6.4 kg
9.9 kg
Note
For OperatingVoltage, Frequency, Power Consumption andVersion Number, refer to the
type number on mains adaptor.
50
17/23PF9945/69 p50
50
4/2/03, 11:14 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
3139 125 30942
51
17/23PF9945/69 p39-51
51
8/25/03, 5:31 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
|