Owner`s Manual
15MF/20MF Series
LCD TV
NEED HELP?CALL US!
MAGNAVOX REPRESENTATIVES ARE READY TO HELP YOU WITH
ANY QUESTIONS ABOUT YOUR NEW PRODUCT. WE CAN GUIDE
YOU THROUGH CONNECTIONS, FIRST-TIME SETUP, AND ANY OF
THE FEATURES. WE WANT YOU TO START ENJOYING YOUR NEW
PRODUCT RIGHT AWAY.
CALL US BEFORE YOU CONSIDER RETURNING THE PRODUCT.
1-800-705-2000
OR VISIT US ON THE WEB AT WWW.USASUPPORT.MAGNAVOX.COM
Important!
Return your Warranty Registration Card within 10 days.
Model No:
Serial No:
Download from Www.Somanuals.com. All Manuals Search And Download.
3138 155 23435
IMPORTANT SAFETY INSTRUCTIONS
READ BEFORE OPERATING EQUIPMENT
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
1.
2.
3.
4.
5.
6.
7.
exhibits a marked change in performance;
E. The appliance has been dropped, or the enclosure
damaged.
Tilt/Stability - All televisions must comply with
recommended international global safety standards for tilt
and stability properties of its cabinet design.
• Do not compromise these design standards by applying
excessive pull force to the front, or top, of the cabinet
which could ultimately overturn the product.
• Also, do not endanger yourself, or children, by placing
electronic equipment/toys on the top of the cabinet. Such
items could unsuspectingly fall from the top of the set and
cause product damage and/or personal injury.
Wall or Ceiling Mounting - The appliance should be
mounted to a wall or ceiling only as recommended by the
manufacturer.
Power Lines - An outdoor antenna should be located
away from power lines.
Outdoor Antenna Grounding - If an outside antenna is
connected to the receiver, be sure the antenna system is
grounded so as to provide some protection against voltage
surges and built up static charges.
Section 810 of the National Electric Code, ANSI/NFPA
No. 70-1984, provides information with respect to proper
grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of
grounding connectors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements for
the grounding electrode. See Figure below.
Object and Liquid Entry - Care should be taken so
that objects do not fall and liquids are not spilled into the
enclosure through openings.
Battery Usage CAUTION - To prevent battery leakage
that may result in bodily injury, property damage, or
damage to the unit:
• Install all batteries correctly, with + and - aligned as
marked on the unit.
17.
Do not block any of the ventilation openings.
Install in accordance with the manufacturers instructions.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and third grounding prong. The wide blade or third
prong are provided for your safety. When the provided
plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
Only use attachments/accessories specified by the
manufacturer.
Use only with a cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid
injury from tip-over.
8.
9.
18.
19.
20.
10.
11.
12
Unplug this apparatus during lightning storms or when
unused for long periods of time.
13.
14.
21.
22.
Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
This product may contain lead and mercury. Disposal of
these materials may be regulated due to environmental
considerations. For disposal or recycling information,
please contact your local authorities or the Electronic
Damage Requiring Service - The appliance should be
serviced by qualified service personnel when:
A. The power supply cord or the plug has been damaged;
B. Objects have fallen, or liquid has been spilled into the
appliance;
15.
16.
• Do not mix batteries (old and new or carbon and
alkaline, etc.).
• Remove batteries when the unit is not used for a long
time.
C. The appliance has been exposed to rain
D. The appliance does not appear to operate normally or
Note to the CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article
820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point of cable entry as practical.
Example ofAntenna Grounding as
GROUND CLAMP
ANTENNA LEAD IN WIRE
per NEC - National Electric Code
ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)
GROUNDING CONDUCTORS (NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)
ELECTRIC SERVICE EQUIPMENT
Download from Www.Somanuals.com. All Manuals Search And Download.
3
CONTENT
Introduction
Here are a few of the special features of your new LCD
TV.
Welcome/Registration of Your TV . . . . . . . . . . . . . . . . . . .2
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . 3
Table of Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Audio/Video In Jacks: Use to quickly connect other
equipment to your LCD TV.
Getting Started
Automatic Channel Programming (Auto Program):
Quick and easy setup of available channels.
Closed Captioning: Allows the viewer to read TV
program dialog or voice conversations as on-screen text.
On-screen Menus: Helpful messages (inEnglish, Spanish,
orFrench)forsettingTVcontrols.
Before Installation . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installing LCD TV on the wall . . . . . . . . . . . . . . . . . . . . . . . .5
Basic TV and Remote Control Operations . . . . . . . . . . . . 6
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Basic Cable TV Connection . . . . . . . . . . . . . . . . . . . . . . . . . 8
Cable Box Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Audio/Video Input Connections . . . . . . . . . . . . . . . . . . . . .10
S-Video Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Component (YPbPr) Connections . . . . . . . . . . . . . . . . . . .12
PC (Monitor) Connection . . . . . . . . . . . . . . . . . . . . . . . . . .13
Remote Control: Works your LCD TV features.
Sleep Timer: Turns off the LCD TV within an amount
of time you specify (15-240 minutes from the current
time).
Install Menu
AutoLock: Lets you block viewing of certain TV
channels if you do not want your children viewing
inappropriate material.
Language Settings . . . . . . . . . . . . . . . . . . . . . . . . . .14
Tuner Mode Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Auto Program (Setting Up Channels) . . . . . . . . . . . . . . . . 16
Channel Edit Control (To Add or Delete channels) . . . .17
Factory Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Standard broadcast (VHF/UHF) or Cable TV
channel
capability
Smart Picture and Smart Sound
Smart Picture Control . . . . . . . . . . . . . . . . . . . . . .19
Smart Sound Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Stereo capability: Includes a built-in amplifier and
twin-speaker system, allowing reception of TV programs
broadcast in stereo.
Picture Menu
Treble, Bass, and Balance: Enhance the LCD TV’s
sound.
TV Picture Menu Controls . . . . . . . . . . . . . . . . . .20
Sound Menu
TV Sound Menu Controls . . . . . . . . . . . . . . . . . . .21
NOTE:This manual covers different versions
and models. Not all features described in this
manual will match those of your LCDTV. This
is normal and does not require you contacting
your dealer or requesting service.
Features Menu
Auto Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Auto Lock Access Code . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Auto Lock Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Auto Lock - Movie Ratings . . . . . . . . . . . . . . . . . . . . . . . . . 25
Auto Lock - TV Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Using The Picture Format . . . . . . . . . . . . . . . . . . . . . . . . . .27
Closed Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
END-OF-LIFE DISPOSAL
PC Mode
PC Picture Controls . . . . . . . . . . . . . . . . . . . . . . . .29
PC Audio Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Using PC PIP (Picture In Picture) Feature . . . . . . . . . . . . .31
Setting Up The PC Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Your new LCD TV and its packaging contain materials
that can be recycled and reused. Specialized companies
can recycle your product to increase the amount of
reusable materials and minimize the amounts that need
to be properly disposed.
Your product also uses batteries that should not be
thrown away when depleted, but should be handed in
and disposed of as small chemical waste.
General Information
Trouble Shooting Tips . . . . . . . . . . . . . . . . . . . . . . 33
Care And Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Regulatory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Factory Service Locations . . . . . . . . . . . . . . . . . . . . . . . . . .38
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
When you replace your existing equipment, please find
out about the local regulations regarding disposal of your
old television,
batteries, and packing materials.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
BEFORE INSTALLATION
efore proceed to install your new LCD TV, please follow
the steps and diagrams as shown to familiarize yourself
B
with the correct and safe way of unfolding the base.
Place the set facing down on a flat surface and a
protective sheet.
1
Unfold the base following the direction as shown on
the diagram.
2
1
2
Place the set upright, you LCD TV is now ready for
3
install.
3
INSTALLING LCDTV ONTHEWALL
The stand of your LCDTV complies with VESA standard,if you intend to install the LCDTV on the wall,please con-
sult a professional technician for proper installing.
The manufacture accepts no liability for installations not performed by professional technician.
(For 15 inch: 75x75 mm , For 20 inch: 100x100 mm)
Download from Www.Somanuals.com. All Manuals Search And Download.
5
BASICTV AND REMOTE CONTROL OPERATIONS
-
������
+
� � � �
-
����������������
+
TELEVISIONAND REMOTE CONTROL
Plug the DC adapter into the DC IN 16V jack
� �
1
on the LCD TV. Plug the power cable into an
outlet.
Press POWER to turn on the LCD TV.
2
3
4
5
Press VOLUME + to increase the sound level.
Or, press VOLUME – to lower the sound level.
Press CH+ or CH- to select channels.
�
Point the remote control toward on the front
of the LCD TV when
operating the LCD TV with the
remote.
�
BATTERY INSTALLATION
Remove the battery compartment lid on the
back of the remote.
6
7
M
E
N
U
Place two AAA batteries in the
remote. Be sure the (+) and (-) ends of the
batteries line up as marked inside the battery
compartment.
OK
P
I
P
SOURCE
C
C
Reattach the battery compartment lid.
8
�
�
�
Download from Www.Somanuals.com. All Manuals Search And Download.
6
REMOTE CONTROL
St andby (Power) but t on
Press to turn the LCD TV on or
off.
Num ber but t ons
Press to select TV channels.
When selecting single-digit
channels, press the number of the
desired channel.
Sleep but t on
Press to set the LCD TV to turn
itself off within a certain time.
The LCD TV will pause for a few
seconds then tune to the selected
channel.
Sm ar t Pict ure but t on
Press repeatedly to select either
Personal, Movie, Sports, Weak
signal, or Multimedia picture
setting.
Mut e but t on
M E N U
Press to eliminate or restore the
LCD TV sound. Mute will appear
on the screen when the sound is
muted.
OK
Sm ar t Sound but t on
P I P
SOURCE
Press repeatedly to select among
the 4 settings; Personal, News,
Music, or Theater.
Menu but t on
C C
Press to activate onscreen menu,
back to previous level inside the
onscreen menu, also press to exit
the onscreen menu.
Pict ure Form at but t on
Press the FORMAT button
repeatedly to toggle among the
four screen format sizes; 4:3,
EXPAND 4:3, COMPRESS 16:9,
or HD 4:3.
Volum e but t on
Press to increase or decrease the
sound level, also press to navigate
left/right in onscreen menu.
PIP but t on
Press repeatedly to change the
size of PIP window in PC mode.
Source but t on
Press to select the video input
source: AV, S-Video, HD, PC, TV.
Previous Channel but t on
Press to go to previously selected
channel.
O K but t on
Press to confirm the option you
selected in the onscreen menu.
Channel but t on
Press to adjust the channel up
or down. Also press to select or
navigate up/down in onscreen
menu.
C .C but t on
Press the C.C button to select CC
on or CC off.
SAP but t on
Press to select a sound mode if
available with the TV
programming:Mono, Stereo, or
SAP.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
ANTENNA CONNECTION
combination antenna receives normal
broadcast channels (VHF 2–13 and UHF 14–69). Your
A
connection is easy because there is only one 75 (ohm) an-
tenna jack on the back of your TV, and that’s where the
antenna goes.
Outdoor or Indoor Antenna
(Combination VHF/UHF)
If your antenna has a round cable
1
(75 ohm) on the end, then you’re ready to
connect it to the LCD TV. If your
antenna has flat, twin-lead wire (300 ohm), you
first need to attach the
Rear Jack panel of
Television
antenna wires to the screws on a 300- to
75-ohm adapter(not supplied).
�
�
Twin-lead
wire to
300-75�
adapter
Connect the antenna (or adapter) to one end
of the supplied L-Adapter as shown, and con-
2
OR
nect the other end of the
L-Adapter to the TV jack on the side of
the LCD TV.
Antenna
with 75
cable �
L-Adapter
BASIC CABLETV CONNECTION
our Cable TV signal into your home may be a
single, 75(•ohm) cable. If so, this connection is very
Y
simple. Follow the step below to connect your Cable TV
signal to your new LCD TV.
The Cable TV signal from
Cable Company
(75
�
coaxial cable)
Connect the Cable TV signal to one end of the
1
supplied L-Adapter as shown, and connect the
other end of the adapter to the TV jack on the
LCD TV.
�
L-Adapter
Rear Jack panel of
Television
Download from Www.Somanuals.com. All Manuals Search And Download.
8
CABLE BOX CONNECTIONS
f you have a Cable Box, follow either set of
The CableTV signal from
the Cable Company
Ithese steps to complete your
�
connections.
�
�
Cable Box with RF In/Out Jacks
This connection will not supply Stereo sound
to the LCD TV.
OUTPUT
CH
3
4
CABLE
IN
TO TV
Connect the Cable TV signal to the IN jack (or
75
Coaxial
Cable
�
1
2
3
RF IN or CABLE IN) on the Cable Box.
Connect an RF coaxial cable (not supplied) to
the OUT jack (or TO TV or RF OUT) of the
Cable Box.
�
L-Adapter
Side Jack Panel of
Television
Connect the other end of the coaxial cable to
one end of the supplied L-Adapter as shown,
and connect the other end of the adapter to
the TV jack on the LCD TV.
VGA
PC
Plug the DC adapter into the DC IN 16V
jack on the LCD TV. Plug the power cable into
an outlet.
Set the Channel 3/4 (or Output channel) switch
of the Cable Box to 3 or 4. Set the TV to the
same channel. When watching TV
programming, change channels at the Cable
Box, not the LCD TV.
4
5
�
DC Adapter
Power
Cable
Cable Box with Audio/Video Out Jacks
This connection will supply Stereo sound to
the LCD TV.
Connect the Cable TV signal to the
IN jack (or RF IN or CABLE IN) on the Cable
Box.
1
S - VIDEO
Using an RCA-type video cable (not
supplied) connect one end of the video cable to
AUDIO
VIDEO
2
the Video Out jack of the Cable Box.Connect
the other end of the cable to the yellow VIDEO
jack on the side of the TV.Video cables are
usually marked with yellow and are available
from Magnavox or electronics retailers. Video
jacks on most equipment are yellow.
Side Jack Panel
of Television
�
VGA
PC
Video Cable
�
Using RCA-type, stereo audio cables (not
supplied), connect one end of the cables to the
3
�
DC Adapter
left and right Audio Out jacks of the Cable Box.
Connect the other end of that cable to the
Audio jack on the side of the LCD TV.Audio
cables are usually marked with red and white
and are available from Magnavox or electronics
retailers.The right
Audio Cable
Power
Cable
Cable
TV signal
audio jack is red and the left audio jack is white.
Match the cable colors to the jack colors.
OUTPUT
CH
�
3
4
L
R
CABLE
IN
TO
TV
AUDIO
OUT
VIDEO
OUT
Plug the DC adapter into the DC IN 16V
jack on the LCD TV. Plug the power cable into
Cable Box
4
an outlet.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
AUDIO/VIDEO INPUT CONNECTIONS
he AUDIO and VIDEO In jacks on the
rear of the LCD TV enable quick
T
connections of other equipment. Connect a VCR,
DVD Player, Video Game, Camcorder, etc., to these
jacks. To view the material playing on the other
equipment, set the LCD TV to its AV Mode.
S
-
VIDEO
AUDIO
VIDEO
Connect a RCA-style video cable
(usually yellow or marked CVBS) to the
1
Rear Jack Panel
of Television
VIDEO OUT jacks of the other
equipment (DVD Player, Camcorder, etc.) and
to the yellow VIDEO jack on the side of the
LCD TV.
VGA
1
PC
Connect RCA-style audio cables (usually red
Video Cable
and white) to the AUDIO OUT (left and right) 3
2
3
jacks on the other equipment. Connect the
other end of the cables to the AUDIO jack on
the side of the LCD TV.
2
Power Cable
Audio Cable
Plug the DC Adapter into the DC IN 16V jack
on the TV. Plug the power cable into an outlet.
Turn on the TV and other equipment.
3
5
SOURCE
Press the Source
AV Mode.
button to set the TV to
4
5
DVD
Press PLAY on the other equipment to
view its material on the TV.
M
E
N
U
4
OK
P
I
P
SOURCE
HELPFUL HINT
C
C
The Audio jack of AV IN is shared
between Video (CVBS) and S-Video signals. If Audio
and Video is connected to Video (CVBS) input, you
can still hear sound if you select S-Video via Source
select, even there appears no image on screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
S-VIDEO CONNECTIONS
he S-Video connection on the rear of the
TLCD TV can provide you with better
picture detail and clarity for the playback of
accessory sources such as DBS (digital broadcast
satellite), DVD (digital video discs), video games, and VHS
VCR (video cassette recorder) tapes than the
normal antenna picture connections.
S
-
VIDEO
AUDIO
VIDEO
Note: The accessory device must have an S-VIDEO OUT
(put) jack in order for you to complete the connection
on this page.
��������� �����
�� ����������
VGA
PC
�
Connect an S-Video cable to the S-VIDEO jack of
�
�
�������
1
the other equipment (DVD Player, Camcorder, etc.)
�����
and to the S-VIDEO jack on the rear of the LCD TV. ����� �����
����� �����
Connect RCA-style audio cables (usually red and
white) to the AUDIO OUT (left and right) jacks on
the other equipment. Connect the other end of the
cables to the AUDIO jack on the side of the LCD
TV.
2
���
�����
��
���
�
���� ���
��� �� ��������
��������� ������
����� �������
�������
���
�
��
���
�
�
�
���
�
���� ���
���
��
Plug the DC Adapter into the DC IN 16V
jack on the LCD TV. Plug the power cable into an
outlet. Turn on the LCD TV and other
equipment.
�
�
3
M
E
N
U
�
OK
SOURCE
Press the
Source button to set
P
I
P
SOURCE
4
5
the LCD TV to its S-VIDEO mode.
C
C
Press PLAY on the other equipment to
view its material on the LCD TV.
HELPFUL HINT
The Audio jack of AV IN is shared between Video
(CVBS) and S-Video signals. If Audio and Video is
connected to S-Video input, you can still hear sound if
you select Video via Source select, even there appears
no image on screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
COMPONENT (YPBPR) CONNECTIONS
omponent Video input provide the
highest possible color and picture
C
resolution in the playback of digital signal source
material, such as with DVD players.
Note: The accessory device must have an
component(YPbPr) output jack in order for you
to complete the connection on this page.
VGA
PC
COMPONENT
VIDEO CABLES
(Green, Blue, Red)
Connect the component (Y, Pb, Pr) Video OUT
jacks from the DVD player(or similar device) to
the COMP(onent) VIDEO Input jacks on the
bottom of the LCD TV.
2
3
1
Audio Cable
Power Cable
Connect the red and white AUDIO CABLES to
the Audio (left ad right) output jacks on the rear
2
of the accessory device to the AUDIO IN jack.
Connect the other end of the cable to the Audio
jack on the rear of LCD TV.
1
2
COMPVIDEO
Pb
S-VIDEO
VIDEO AUDIO
Plug the DC Adapter into the DC IN 16 V jack
on the LCD TV. Plug the power cable into an
R
3
Y
OUT
OUT
OUT
outlet. Turn on the LCD TV and other
equipment.
L
Pr
SOURCE
3
Press the SOURCE
control to select HD. HD will appear in the
upper left corner on the TV screen.
button on the remote
4
5
ACCESSORY DEVICE
EQUIPPED WITH COMPONENT
VIDEO OUTPUTS.
5
Insert a DVD disc into the DVD player and press
the PLAY button on the
DVD Player.
M
E
N
U
4
OK
P
I
P
SOURCE
C
C
Download from Www.Somanuals.com. All Manuals Search And Download.
12
PC (MONITOR) CONNECTION
his LCD TV can be used as a PC .
TYour computer will have to be equipped with a
VGA type video output and VGA cable.
Connect one end of the VGA Video
cable (not supplied) to the Monitor (video)
1
Side Jack Panel
of Television
output on the computer, while connecting the
other ends to the VGA INPUT jack on the LCD
TV.
Although audio connections are not required,
the LCD TV can reproduce the computers
VGA
PC
2
audio out by an AUDIO ADAPTER to the Audio
output jack on the computer (if available)while
connecting the other ends of the Audio cables to
the PC AUDIO Jacks on the bottom of the TV.
�
�
�
Plug the DC Adapter into the DC IN 16V jack on
the LCD TV. Plug the power cable into an outlet.
Turn on the LCD TV and PC.
������������
���
3
�����
�����������
�
SOURCE
Press the SOURCE
button until PC MODE
appears on the screen.
4
���������
�
M
E
N
U
�
OK
P
I
P
SOURCE
C
C
Download from Www.Somanuals.com. All Manuals Search And Download.
13
LANGUAGE SETTINGS
or English, French or Spanish-speaking
FTV owners, an onscreen LANGUAGE option is
present. The LANGUAGEM control enables you to
set the TV’s onscreen menu to be shown in either
English, French or Spanish.
MAIN CONTROLS
PICTURE
AUDIO
FEATURES
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
MANUAL FINE TUNE
FACTORY RESET
INSTALL
INSTALL
LANGUAGE
TUNER MODE
ENGLISH
AUTO PROGRAM
CHANNEL EDIT
MANUAL FINE TUNE
FACTORY RESET
M
E
N
U
Press the MENU
button on the
1
2
3
4
5
remote control to see the onscreen menu.
�
Press the (CH-)
INSTALL menu.
button to highlight the
button to enter the
�
M
E
N
U
Press the (VOL+)
INSTALL menu.
��
�
�
P I P
SOURCE
Press the (VOL+)
French or Spanish.
button to select English,
C
C
�
M
E
N
U
Press the MENU
button repeatedly to clear
the menu from the screen.
HELPFUL HINT
Remember, the LANGUAGE control makes
only the TV’s onscreen MENU items
appear in English, French or Spanish text. It does
not change the other onscreen text features,
such as Closed Captioning (CC), with TV
shows.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
TUNER MODE CONTROL
he Tuner Mode allows you to change the LCD
TTV’s signal input to Cable or Air
(antenna). It’s important for the LCD TV to know if
you want to receive channels from a cable TV signal
or an antenna signal.
MAIN CONTROLS
PICTURE
AUDIO
LANGUAGE
TUNER MODE
INSTALL
FEATURES
AUTO PROGRAM
CHANNEL EDIT
MANUAL FINE TUNE
FACTORY RESET
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
INSTALL
CABLE
MANUAL FINE TUNE
FACTORY RESET
M
E
N
U
Press the Menu
menu.
button to see the onscreen
button to highlight the
button to enter the
1
2
3
4
5
Press the (CH-)
INSTALL menu.
1
6
Press the (VOL+)
INSTALL menu.
M E N U
OK
P I P
SOURCE
3
5
Press the (CH-)
TUNER MODE menu.
button to highlight the
C C
Press the (VOL+)
buttons to select CABLE, AIR (antenna), or
AUTO.
or (VOL-)
2
4
M
E
N
U
Press the MENU
button repeatedly to clear
the menu from the screen.
6
HELPFUL HINT
•WhenCABLEisselected, channels1-125areavailable.
•When ANTENNA is selected, channels 2-69 are
available.
•When AUTO is selected, your LCD TV will search
automatically for antenna and cable channels.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
AUTO PROGRAM (SETTING UP CHANNELS)
our LCD TV can automatically set itself for local area
(or cable TV) channels. This makes it easy for you to
select only the TV stations in your area by pressing the
CH (+) or CH (-) button.
Y
MAIN CONTROLS
PICTURE
AUDIO
LANGUAGE
TUNER MODE
FEATURES
AUTO PROGRAM
CHANNEL EDIT
MANUAL FINE TUNE
FACTORY RESET
INSTALL
INSTALL
M
E
N
U
LANGUAGE
TUNER MODE
Press the MENU
button on the remote
1
control to show the
onscreen menu.
AUTO PROGRAM
CHANNEL EDIT
MANUAL FINE TUNE
FACTORY RESET
START?
Press the (CH-)
button to
highlight the INSTALL menu.
AUTO STORE
2
3
4
5
6
PLEASE WAIT
PROG.FOUND
CHANNEL
Press the (VOL+) button
to enter the INSTALL menu.
1
6
0
3
3
5
Press the (CH-)
button to
M E N U
highlight the AUTO PROGRAM control.
OK
Press the (VOL+) button to start the AUTO
PROGRAM scanning of channels.
P I P
SOURCE
M
E
N
U
Press the MENU
button repeatedly to clear
C C
2
4
the menu from the screen, after AUTO STORE
has finished.
HELPFUL HINT
After you’ve run Auto Program, check out
the results. Press the CH+
or the
CH-
button and see which channels you can
select.
Remember, an antenna or cable TV signal
must first be connected to your LCD TV
(see pages 8-9 of this owner’s manual).
Download from Www.Somanuals.com. All Manuals Search And Download.
16
CHANNEL EDIT CONTROL
hannel Edit control lets you edit the channel
listing. You can add or remove a channel in the
C
MAIN CONTROLS
LCD TV’s memory.
PICTURE
AUDIO
FEATURES
LANGUAGE
TUNER MODE
INSTALL
AUTO PROGRAM
CHANNEL EDIT
MANUAL FINE TUNE
FACTORY RESET
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
MANUAL FINE TUNE
FACTORY RESET
CHANNEL
SKIPPED
INSTALL
M
E
N
U
Press the Menu
button to see the
button to
1
onscreen menu.
CHANNEL EDIT
2
CHANNEL
SKIPPED
Press the (CH-)
2
highlight the INSTALL menu.
�
�
Press the (VOL+)
INSTALL menu.
button to enter the
CHANNEL EDIT
CHANNEL
SKIPPED
3
4
5
6
ACTIVE
M
E
N
U
OK
Press the (CH-)
button to
highlight the CHANNEL EDIT menu.
P I P
SOURCE
�
�
C
C
Press the (VOL+)
button to enter the
�
�
�
�
CHANNEL EDIT menu.
�
�
In CHANNEL column, press (VOL+)
or
(VOL-)
to select the channel you wish
to add or remove.
In SKIPPED column, press (VOL+)
or
7
8
(VOL-)
to select ACTIVE (to add)
or SKIPPED (to delete) the channel you
selected.
M
E
N
U
Press the MENU
button
repeatedly to clear the menu from the
screen.
HELPFUL HINT
Repeat steps 6 –7 to add or delete
additional channels to or from the LCD TV’s
memory.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
FACTORY RESET
our TV can be reset to the original
factory settings by performing the
following steps.
Y
MAIN CONTROLS
PICTURE
AUDIO
LANGUAGE
TUNER MODE
FEATURES
AUTO PROGRAM
CHANNEL EDIT
MANUAL FINE TUNE
FACTORY RESET
INSTALL
INSTALL
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
MANUAL FINE TUNE
FACTORY RESET
M
E
N
U
Press the MENU
button on the
1
remote control to see the onscreen
menu.
YES
�
Press the (CH-)
INSTALL menu.
button to highlight the
2
3
4
5
6
�
Press the (VOL+)
INSTALL menu.
button to enter the
M E N U
OK
�
�
P I P
Press the (CH-)
FACTORY RESET control.
button to highlight the
SOURCE
C C
Press the (VOL+)
to the original factory settings.
button to reset the TV
�
�
M
E
N
U
Press the MENU
clear the menu from the screen.
button repeatedly to
HELPFUL HINT
If you reset the TV to the factory settings,
all your present setting on picture, audio,
Close Caption and other feature settings
will be erased and replaced by the
manufacture’s default settings. However,
your AutoLock access code will not be
erased. Please refer to page 23 for details.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
SMART PICTURE CONTROL
hether you’re watching a movie or a video
Wgame, your LCD TV has video control preset
that will match with your current program source or
content. Smart Picture quickly resets your TV’s video
controls for a number of different types of programs
and viewing conditions that you may have in your
home. The Movies, Sports, Weak Signal, Multimedia,
and Night Smart Picture controls have been preset at
the factory to easily adjust the TV’s brightness, color,
picture, sharpness, tint, and color temperature levels.
In the Personal smart picture mode you can create
your own preferred video settings.
Personal
Movies
Sports
�
M
E
N
U
�
OK
P
I
P
SOURCE
Press the PICTURE button
control. The current Smart Picture setting will appear
on the screen.
Press the PICTURE button
select either Personal, Movies, Sports, Weak
on the remote
Weak Signal
Multimedia
C
C
1
2
repeatedly to
Signal, Multimedia, and Night Smart Picture settings.
Note:The settings of the Personal smart picture mode
can be adjusted in picture options within the
onscreen menu. The Personal mode is the only
mode which can be adjusted by the user via the
onscreen picture control menu.
Night
SMART SOUND CONTROL
mart Sound allows you to select from three
Suser presets and a personal mode that you
set according to you own preferences through
the onscreen Sound menu. The three user
presets(News, Music, and Theatre) enable you
to tailor the TV sound so as to enhance the
particular program you are watching. Following
these steps to select any of the options.
Personal
News
Music
Press the Sound button
The current Smart Sound setting will appears on the
screen.
on the remote control.
M
E
N
U
1
2
OK
�
�
P
I
P
SOURCE
Theatre
C
C
Press the Sound button
among the four setting: Personal, News, Music, or
Theatre.
repeatedly to toggle
Note:The settings of the Personal smart sound mode can
be adjusted in sound control within the onscreen
menu. The Personal mode is the only mode which
can be adjusted by the user via the onscreen sound
control menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
TV PICTURE MENU CONTROLS
o adjust your LCD TV picture, select
Ta channel and follow these steps.
1
MAIN CONTROLS
M
E
N
U
Press the MENU
onscreen menu.
button to see the
PICTURE
AUDIO
FEATURES
SMART PICTURE
BRIGHTNESS
COLOR
CONTRAST
SHARPNESS
TINT
PICTURE
SMART PICTURE
BRIGHTNESS
COLOR
CONTRAST
SHARPNESS
TINT
PERSONAL
INSTALL
When PICTURE menu is
2
highlighted,press the (VOL+)
to enter the PICTURE menu.
button
PICTURE
SMART PICTURE
BRIGHTNESS
COLOR
CONTRAST
SHARPNESS
TINT
60
60
60
60
60
�
Press the (CH+)
or (CH-)
button to choose the item you want to
adjust: Smart Picture, Brightness, Color,
Contrast, Sharpness or Tint.
�
3
�
PICTURE
SMART PICTURE
BRIGHTNESS
COLOR
CONTRAST
SHARPNESS
TINT
�
M E N U
Smart Picture: Please refer to
page 20, for details on Smart Picture
Settings.
OK
PICTURE
�
�
�
P I P
SOURCE
SMART PICTURE
BRIGHTNESS
COLOR
CONTRAST
SHARPNESS
TINT
Brightness: Adjust to brighten the
dark parts of the picture. This
appears to add white to the color.
Color: Adjust to add or reduce
color.
C C
PICTURE
SMART PICTURE
BRIGHTNESS
COLOR
CONTRAST
SHARPNESS
TINT
�
�
Contrast: Adjust to “sharpen” the
Picture quality. The black portions of
the picture become richer in darkness
and the white become brighter.
Sharpness: Adjust to improve detail.
Tint: Adjust to obtain natural skin
tones.
PICTURE
SMART PICTURE
BRIGHTNESS
COLOR
CONTRAST
SHARPNESS
TINT
Press the (VOL+)
or (VOL-)
4
5
button to adjust the item.
Press the (CH+)
or (CH-)
button to select and adjust other picture
controls.
M
E
N
U
Press the MENU
button repeatedly
6
to remove the menu.
HELPFUL HINT
Brightness, color, contrast and
sharpness can only be accessed when
Smart Picture is set to PERSONAL.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
TV SOUND MENU CONTROLS
o adjust your LCD TV Sound, select a channel and
follow these steps.
MAIN CONTROLS
T
PICTURE
AUDIO
FEATURES
SMART SOUND
SETTINGS
STEREO
VIRTUAL SURROUND
AVL
M
E
N
U
Press the MENU
button to see the menu.
AUDIO
INSTALL
1
2
SMART SOUND
SETTINGS
PERSONAL
Press the (CH-)
AUDIO menu.
button to highlight the
STEREO
VIRTUAL SURROUND
AVL
AUDIO
Press the (VOL+) button to enter the
AUDIO menu.
�
�
SMART SOUND
SETTINGS
TREBLE
BASS
3
4
STEREO
BALANCE
�
�
VIRTUAL SURROUND
AVL
Press the (CH+)
or (CH-)
button to
M E N U
choose the item you want to adjust: Smart
Sound, Settings, Stereo, Virtual Surround,
AVL.
AUDIO
SMART SOUND
SETTINGS
OK
STEREO
STEREO
VIRTUAL SURROUND
AVL
P I P
SOURCE
�
�
�
Smart Sound: Please refer to page19 for
details on Smart Sound Settings.
Settings: Allows you to adjust Treble, Bass,
and Balance of the sound.
C C
AUDIO
SMART SOUND
SETTINGS
STEREO
VIRTUAL SURROUND
AVL
VIRTUAL SURROUND
�
Stereo: Adjust to select between Stereo,
Mono, or SAP.
�
AUDIO
Virtual Surround: Adds greater depth and
dimension to TV sound. Select from Virtual
Surround or OFF.
SMART SOUND
SETTINGS
STEREO
VIRTUAL SURROUND
AVL
�
YES
AVL (Auto Volume Leveler): When On, AVL
will level out the sound being heard when
sudden changes in volume occur during
commercial breaks or channel changes.
Press the (VOL+)
adjust the item.
or (VOL-)
button to
5
6
7
Press the (CH+)
or (CH-)
button to
select and adjust other sound controls.
M
E
N
U
Press MENU
to remove the menu.
HELPFUL HINT
•Treble and Bass can only be accessed when Smart
Sound is set to Personal.
•If Stereo is not presented on a selected show and
the TV is placed in Stereo mode, the sound
coming from TV will remain in Mono mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
AUTO LOCK
MOVIE RATING
TV RATING
he AUTO Lock feature is an
G
Y
ON
ON
T
integratedcircuit that receives and
PG
Y7
PG13
R
NC17
G
PG
14
processes data sent by
broadcasters, or other program
providers, that contain program
content advisories.When programmed
by the viewer, a TV with AUTO Lock can
respond to the content
X
MA
MOVIE RATINGS
TV RATINGS
G: General Audience - All ages
admitted.
TV-Y All children - Appropriate for
all children. Designed for a very young
audience, including children ages 2-6.
This type of programming is not
expected to frighten younger children.
TV-Y7 Directed to Older Children -
Designed for children age 7 and above.
It may be more appropriate for
children who can distinguish between
make-believe and reality. This
advisories and block program content
that may be found objectionable (such
as offensive language, violence, sexual
situations, etc.). This is a great feature
to censor the type of viewing children
may watch.
Most parents would find this program
suitable for all ages. This type of
programming contains little or no
violence, no strong language, and little
or no sexual dialog or situations.
PG: Parental Guidance Suggested -
This programming contains material
that parents may find unsuitable for
younger children. It may contain one
or more of the following:
AUTO Lock offers various BLOCKING
controls from which to choose:
Access Code - An Access Code must be
set to prevent children from unblocking
questionable or censored programming set
by their parents.
programming may include mild fantasy
and comic violence (FV or fantasy
violence).
moderate violence, some sexual
situations, infrequent coarse
TV-G General Audience - Most
parents would find this programming
suitable for all ages. This type of
programming contains little or no
violence, no strong language, and little
or no sexual dialog or situations.
TV-PG Parental Guidance
Suggested -
language, or some suggestive dialog.
PG-13: Parents Strongly
Block Enable - After an access code has
been programmed, you can block
Cautioned -
This programming contains
programming depending on the received
rating and user setting.
material that parents may find
unsuitable for children under the age
of 13. It contains one or more of the
following: violence, sexual situations,
coarse language, or suggestive dialog.
R: Restricted -This programming
is specifically designed for adults.
Anyone under the age of 17 should
only view this programming with an
accompanying
Movie Ratings - Certain blocking options
exist which will block programming based
on ratings patterned by the Motion Pictures
Association of America.
Contains material that parents may
find unsuitable for younger children.
This type of programming contains one
or more of the following: Moderate
violence (V), some sexual situations
(S), infrequent coarse language (L), or
some suggestive dialog (D).
TV Ratings - Just like the Movie Ratings,
programs can be blocked from viewing using
standard TV ratings set by TV broadcasters.
parent or adult guardian. It contains
one or more of the following: intense
violence, intense sexual situations,
strong coarse language, or intensely
suggestive dialog.
TV-14 Parents Strongly Cautioned -
Contains some material that many
parents would find unsuitable for
children under age 14. This type of
programming contains one or more of
the following: intense violence (V),
intense sexual situations (S), strong
coarse language (L), or intensely
suggestive dialog (D).
NC-17: No children under the age
of 17 will be admitted. - This type
of programming should be viewed by
adults only. It contains graphic
violence, explicit sex, or crude,
indecent language.
TV-MA Mature Audience Only -
Specifically designed to be viewed
by adults and may be unsuitable
for children under 17. This type of
programming contains one or more
of the following: graphic violence (V),
explicit sexual situations (S), or crude,
indecent language (L)
X: Adults Only - Thistypeof
programming contains one or more of
the following: very graphic violence,
very graphic and explicit or indecent
sexual acts, and very coarse and
intensely suggestive language
Download from Www.Somanuals.com. All Manuals Search And Download.
22
AUTO LOCK ACCESS CODE
ver the next few pages you’ll learn how
Oto block programs and understand the rating
terms for certain broadcasts. First, set an access code.
MAIN CONTROLS
PICTURE
AUDIO
SOURCE
PICTURE FORMAT
PICTURE ALIGNMENT
AUTOLOCK
FEATURES
FEATURES
INSTALL
M
E
N
U
Press the MENU
onscreen menu.
button to see the
button to highlight the
button to enter the
button to select AUTO
button
LOCK PROGRAM
CHANG CODE
CLEAR ALL
SOURCE
PICTURE FORMAT
PICTURE ALIGNMENT
AUTOLOCK
CLOSED CAPTION
1
2
3
4
5
6
BLOCK OPTION
MOVIE RATING
TV RATING
CLOSED CAPTION
Press the (CH-)
CHANGE CODE
6
FEATURES menu.
ENTER NEW CODE
CONFIRM CODE
----
----
1
7
Press the (VOL+)
FEATURES menu.
M E N U
Press the (CH-)
LOCK.
OK
3
5
P I P
SOURCE
Press the (VOL+)
C C
CHANGE CODE will appear on the screen.
2
4
Enter a four-digit code using the Number
buttons. The screen will prompt you to confirm
the code you just entered. Enter your same new
code again.
M
E
N
U
Press MENU
repeatedly to remove
the menu from the screen.
7
HELPFUL HINT
Remember that 0711 is the default AutoLock
code. If your access code has been changed by
someone other than you (a child, for example)
or you have forgotten the code, you can always
get in by inputting the default code.
NOTE TO PARENTS:
It is not possible for your child to unblock a channel
without knowing your access code or changing it to a
new one. If your code has been changed without your
knowledge, then you will become aware that blocked
channels may have been viewed.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
AUTO LOCK PROGRAM
fter your personal access code has been
set (see the previous page), you are ready to se-
A
lect the channels or inputs you want to block out or
censor.
MAIN CONTROLS
PICTURE
AUDIO
SOURCE
FEATURES
PICTURE FORMAT
PICTURE ALIGNMENT
AUTOLOCK
FEATURES
M
E
N
U
LOCK PROGRAM
CHANG CODE
CLEAR ALL
SOURCE
PICTURE FORMAT
PICTURE ALIGNMENT
AUTOLOCK
Press the MENU
onscreen menu.
button to see the
INSTALL
CLOSED CAPTION
1
2
3
4
5
6
7
BLOCK OPTION
MOVIE RATING
TV RATING
CLOSED CAPTION
Press the (CH-)
FEATURES menu.
button to highlight the
button to enter the
button to select
6
AUTOLOCK
ACCESS CODE
----
1
8
Press the (VOL+)
FEATURES menu.
AUTOLOCK
LOCK PROGRAM
CHANGE CODE
CLEAR ALL
18
M E N U
Press the (CH-)
AUTO LOCK.
BLOCK OPTION
MOVIE RATING
TV RATING
OK
3
7
P I P
SOURCE
Press the (VOL+)
AUTO LOCK menu.
button to enter
5
C C
7
2
4
Use the Number buttons to enter
your access code.
Press the (VOL+)
current selected channel or (VOL-)
button to unblock a channel.
button to block
M
E
N
U
Press MENU
repeatedly to remove the
8
menu from the screen.
Note:You can block additional channels by using
Number buttons to jump to another channel.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
AUTO LOCK - MOVIE RATINGS
he AUTO Lock feature can block programming
Tbased on the Movie Industry ratings.
Once you’ve entered your access code and the AUTO
Lock features are displayed on the
screen:
MAIN CONTROLS
PICTURE
AUDIO
SOURCE
PICTURE FORMAT
PICTURE ALIGNMENT
AUTOLOCK
FEATURES
FEATURES
LOCK PROGRAM
CHANG CODE
CLEAR ALL
SOURCE
PICTURE FORMAT
PICTURE ALIGNMENT
AUTOLOCK
INSTALL
M
E
N
U
CLOSED CAPTION
Press the MENU
onscreen menu.
button to see the
BLOCK OPTION
MOVIE RATING
1
2
3
4
5
6
7
8
CLOSED CAPTION
6
AUTOLOCK
ACCESS CODE
Press the (CH-)
FEATURES menu.
button to highlight the
button to enter the
----
1
9
Press the (VOL+)
FEATURES menu.
AUTOLOCK
G
LOCK PROGRAM
CHANGE CODE
CLEAR ALL
PG
PG13
R
NC17
M E N U
BLOCK OPTION
MOVIE RATING
TV RATING
Press the (CH-)
LOCK.
button to select AUTO
button, INPUT USER CODE
X
OK
MOVIE RATING
3
5
8
P I P
SOURCE
G
PG
PG13
R
NO
C C
Press the (VOL+)
will appear.
NC17
X
2
4
7
Use the Number buttons to enter your access
code.
Press the (CH-)
RATING.
button to select MOVIE
Press the (VOL+)
button to highlight any of the
Movie Rating options. When highlighted, all
these options can be (ON) blocked or (OFF)
unblocked.
M
E
N
U
Press MENU
from the screen.
repeatedly to remove the menu
9
HELPFUL HINT
When a rating is chosen to be blocked, any
higher level rating will also be blocked from
viewing. (i.e.: If “R” is selected to be blocked,
NC-17 and X will automatically be blocked.)
When a rating is set to unblock, only the selected
rating will be unblocked (Ratings lower will not
automatically be unblocked.)
Download from Www.Somanuals.com. All Manuals Search And Download.
25
AUTO LOCK -TV RATINGS
he AUTO Lock feature can block
Tprogramming based on the TV
Industry ratings.Once you’ve entered your access
code and the AUTO Lock features are displayed
on the screen:
MAIN CONTROLS
PICTURE
AUDIO
FEATURES
SOURCE
PICTURE FORMAT
PICTURE ALIGNMENT
FEATURES
LOCK PROGRAM
CHANG CODE
CLEAR ALL
BLOCK OPTION
MOVIE RATING
TV RATING
SOURCE
PICTURE FORMAT
PICTURE ALIGNMENT
AUTOLOCK
INSTALL
AUTOLOCK
CLOSED CAPTION
M
E
N
U
Press the MENU
onscreen menu.
button to see the
CLOSED CAPTION
1
2
3
4
5
�
AUTOLOCK
ACCESS CODE
Press the (CH-)
highlight the FEATURES menu.
button to
----
�
�
Press the (VOL+)
to enter the FEATURES menu.
button
AUTOLOCK
M E N U
Y
LOCK PROGRAM
CHANGE CODE
CLEAR ALL
BLOCK OPTION
MOVIE RATING
TV RATING
Y7
G
PG
14
OK
�
�
Press the (CH-)
highlight AUTO Lock.
button to
MA
P I P
SOURCE
�
TV RATING
NO
Y
Y7
G
PG
14
C C
�
Press the (VOL+)
INPUT USER CODE will appear on the
screen.
button,
�
�
�
MA
Use the Number buttons to enter your
access code.
6
7
8
Press the (CH-)
RATING.
button to select TV
M
E
N
U
Press the (VOL+)
or (VOL-)
Press MENU
repeatedly to
remove the menu from the screen.
9
button to highlight any of the TV
Rating options. When highlighted, all these
options can be (ON) blocked or (OFF)
unblocked.
HELPFUL HINT
When a rating is chosen to be blocked, any
higher level rating will also be blocked from
viewing. (i.e.: If “R” is selected to be blocked,
NC-17 and X will automatically be blocked.)
When a rating is set to unblock, only the selected
rating will be unblocked (Ratings lower will not
automatically be unblocked.)
Download from Www.Somanuals.com. All Manuals Search And Download.
26
USINGTHE PICTURE FORMAT
ou can change the picture format size to match
the type of program you are watching. Select the
Y
normal 4:3, EXPAND 4:3, or COMPRESS 16:9, or HD
4:3 aspect ratios.
MAIN CONTROLS
FEATURES
PICTURE
AUDIO
SOURCE
PICTURE FORMAT
PICTURE ALIGNMENT
AUTOLOCK
SOURCE
PICTURE FORMAT
PICTURE ALIGNMENT
FEATURES
4 : 3
M
E
N
U
INSTALL
Press the MENU
onscreen menu.
button to see the
CLOSED CAPTION
AUTOLOCK
1
2
3
CLOSED CAPTION
Press (CH -)
FEATURES menu.
button to highlight the
4:3
1
6
Press (VOL+)
FEATURES menu.
button to enter the
M E N U
OK
Press (CH -)
PICTURE FORMAT menu.
button to highlight the
3
5
P I P
SOURCE
4
5
C C
Press (VOL+)
PICTURE FORMAT.
button to change the
EXPAND 4:3
2
4
Note: Press the FORMAT button repeatedly
to toggle among the four screen format
sizes; 4:3, EXPAND 4:3, or COMPRESS
16:9, or HD 4:3.
COMPRESS16:9
M
E
N
U
Press MENU
repeatedly to
remove the menu from the screen.
6
Note: HD 4:3 Picture Format is available in HD Mode
with 720p/1080i only.
HD 4:3
Download from Www.Somanuals.com. All Manuals Search And Download.
27
CLOSED CAPTIONS
losed Captioning (CC) allows you to
MAIN CONTROLS
C
read the voice content of television
PICTURE
AUDIO
SOURCE
PICTURE FORMAT
PICTURE ALIGNMENT
AUTOLOCK
programs on the TV screen. Designed to help the hear-
ing impaired, this feature uses onscreen “text boxes” to
show dialogue and conversations while the TV program
is in progress.
FEATURES
FEATURES
INSTALL
CAPTION MODE
CC DISPLAY
SOURCE
PICTURE FORMAT
CLOSED CAPTION
PICTURE ALIGNMENT
AUTOLOCK
CLOSED CAPTION
CLOSED CAPTION
CAPTION MODE
CC DISPLAY
CC1
M
E
N
U
Press the MENU
menu.
button to see the onscreen
button to highlight the
button to enter the
1
1
2
3
4
5
M E N U
Press the (CH -)
FEATURES menu.
OK
3
5
P I P
SOURCE
Press the (VOL+)
FEATURES menu.
C C
Press the (CH -)
CAPTION.
button to select CLOSE
button to select the closed
2
4
Press the (VOL+)
caption you want: CC MUTE, CC1, CC2, CC3,
CC4, Txt1, Txt2, Txt3 or Txt4.
Note:Closed Caption can also be activated by pressing
CC button on your remote control.
HELPFUL HINT
Not all TV programs and product
commercials are broadcast with Closed
Captioning (CC). Nor are all Closed
Captioning MODES (CAPTION 1–4 or TEXT 1–4)
necessarily being used by broadcast
stations during the transmission of a program
offering Closed Captioning. Refer to your area’s TV
program listings for the stations and times of shows
being broadcast with Closed Captioning.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
PC PICTURE CONTROLS
his TV can also be used as a PC Monitor. A
MAIN CONTROLS
TPC video signal must be present or the TV will go
PICTURE
AUDIO
SMART PICTURE
BRIGHTNESS
into standby mode. The PC Picture
PICTURE
CONTRAST
FEATURES
INSTALL
controls allow you to adjust the picture.
allow you to adjust the picture.
AUTO ADJUST
MANUAL ADJUST
SMART PICTURE
BRIGHTNESS
NORMAL
CONTRAST
AUTO ADJUST
MANUAL ADJUST
Note: Make sure you are in PC mode.
PICTURE
M
E
N
U
Press the MENU
button on the remote
SMART PICTURE
BRIGHTNESS
CONTRAST
AUTO ADJUST
MANUAL ADJUST
60
1
2
3
control to see the onscreen menu.
1
5
When the PICTURE menu is highlighted, press
the (VOL+) button to enter the PICTURE
menu.
3
PICTURE
M E N U
SMART PICTURE
BRIGHTNESS
CONTRAST
AUTO ADJUST
MANUAL ADJUST
60
OK
Press the (CH +)
or (CH -)
button to
2
4
P I P
SOURCE
highlight the item that you would like to adjust.
Smart Picture: Adjust the color
temperature of the picture. Select from
Normal, Cool, or Warm.
4
PICTURE
C C
SMART PICTURE
BRIGHTNESS
CONTRAST
AUTO ADJUST
MANUAL ADJUST
YES
Brightness: Adjust to brighten the darkest
parts of the picture.
Contrast: Adjust to “sharpen” the Picture
quality. The black portions of the picture
become richer in darkness and the white
become brighter.
3
PICTURE
SMART PICTURE
BRIGHTNESS
CONTRAST
AUTO ADJUST
MANUAL ADJUST
PHASE
CLOCK
HORIZONTAL
VERTICAL
Auto Adjust: The LCD Monitor will
automatically adjust to the best image
position, phase, and clock setting.
Manual Adjust: The Manual Adjust control
allow you to manually fine tune the image as it
appears on the screen.
Phase-eliminates the horizontal
interfering lines.
Clock-eliminates the vertical interfering
lines.
Horizontal-adjust the horizontal
placement of the picture.
Vertical-adjust the vertical placement of the
picture.
Press the (VOL+)
adjust the item.
or (VOL-)
button to
4
5
M
E
N
U
Press MENU
repeatedly to remove
the menu from the screen.
Note: To adjust other items repeat steps 4 and 5.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
PCAUDIO CONTROLS
his TV can also be used as a PC Monitor. A PC
Tvideo signal must be present or the TV will go
into standby mode. The AUDIO controls allow you
to adjust the sound.
MAIN CONTROLS
PICTURE
AUDIO
SMART SOUND
SETTINGS
STEREO
AUDIO
FEATURES
VIRTUAL SURROUND
AVL
INSTALL
SMART SOUND
SETTINGS
PERSONAL
Note: Make sure you are in PC mode.
STEREO
VIRTUAL SURROUND
AVL
M
E
N
U
Press the MENU
button on the
remote control to show the
onscreen menu.
1
AUDIO
SMART SOUND
SETTINGS
STEREO
VIRTUAL SURROUND
AVL
TREBLE
BASS
Press the (CH-)
AUDIO menu.
button to highlight the
BALANCE
1
6
M E N U
2
3
Press the (VOL+)
button to shift the
AUDIO
menu to the right to enter the AUDIO
menu.
4
SMART SOUND
SETTINGS
STEREO
VIRTUAL SURROUND
AVL
STEREO
OK
Press the (CH +)
or (CH-)
button to highlight the item that you would
like to adjust:
Smart Sound: Allows you to select from 3
factory-set controls and a
personal control. The 3 factory-set
controls (News, Music, and Theatre)
enhance the particular program you are
watching.
Settings: Allows you to adjust Treble, Bass,
and Balance of the Sound.
3
5
5
4
P I P
SOURCE
AUDIO
SMART SOUND
SETTINGS
STEREO
VIRTUAL SURROUND
AVL
C C
VIRTUAL SURROUND
2
4
AUDIO
SMART SOUND
SETTINGS
STEREO
VIRTUAL SURROUND
AVL
Stereo: To select from Stereo, Mono, and
SAP.
YES
Virtual Sound: Adds greater depth and
dimension to PC sound.
AVL (Auto Volume Leveler)- When ON,
AVL will level out the sound being heard
when sudden changes in volume occur
during commercial breaks or channel
changes.
Press the (VOL+)
buttons to adjust the item.
or (VOL-)
5
6
M
E
N
U
Press MENU
repeatedly to remove the
menu from the screen.
HELPFUL HINT
To adjust other items repeat steps 4 and 5.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
USING PC PIP (PICTURE IN PICTURE) FEATURE
IP (Picture-in-Picture) feature allows you to call
up a subscreen when you are using your TV as a
P
monitor.
MAIN CONTROLS
Note: Make sure you are in PC mode.
PICTURE
AUDIO
PIP
SOURCE
FEATURES
FEATURES
M
E
N
U
Press the MENU
onscreen menu.
button to see the
SIZE
INSTALL
PIP
SOURCE
VIDEO
AUDIO
DISPLAY
1
2
3
Press (CH -)
FEATURES menu.
button to highlight the
Press (VOL+)
FEATURES menu.
button to enter the
�
�
M E N U
Press (VOL+)
button to enter the PIP menu.
��
4
5
�
P I P
SOURCE
Press the (CH +)
or ( CH -)
buttons to
�
highlight the item that you would like to adjust.
SIZE: Turn off and set the size of PIP. You
can choose you preferred size of small,
medium, large, or PBP (Picture Beside
Picture).
Video: Select video source of PIP from AV,
S-Video, TV, or Component.
Audio: Select audio source of PIP or PC.
Display: Select which corner of the
position of PIP.
C C
�
�
HELPFUL HINT
PIP windows with component video source can only
support up to 480i (SD) video signal.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
SETTING UPTHE PC MODE (PERSONAL COMPUTER MONITOR)
15MF Series (15” LCD TV)
No
1
Resolution
640 x 480
Mode
V. Frequency (Hz)
59.940
H. Frequency (kHz)
31.469
VGA VESA 60
SVGA VESA 56
SVGA VESA 60
2
56.250
35.156
800 x 600
1024 x 768
3
60.317
37.897
4
XGA VESA 60
60.004
48.363
20MF Series /605T (20” LCD TV)
No
1
Resolution
640 x 480
Mode
V. Frequency (Hz)
59.940
H. Frequency (kHz)
31.469
VGA VESA 60
SVGA VESA 56
SVGA VESA 60
2
56.250
35.156
800 x 600
3
60.317
37.897
20MF Series /500T (20” LCD TV)
No
1
Resolution
640 x 480
Mode
V. Frequency (Hz)
59.940
H. Frequency (kHz)
31.469
VGA VESA 60
Download from Www.Somanuals.com. All Manuals Search And Download.
32
TROUBLE SHOOTINGTIPS
No Power
• Check the TV power cord. Disconnect the power cord from the power outlet for 10 seconds, then
reinsert the plug into the outlet. Press POWER to turn on the TV again.
• Make sure the outlet is not on a wall switch.
• Make sure a fuse has not blown at the power outlet.
No Picture
• Check the antenna or Cable TV connections. Connect the antenna or Cable TV signal securely to the
TV’s 75Ω jack on the rear of the TV.
• Set TUNER MODE correctly. Details are on page 15.
• Activate AUTO PROGRAM to find all available channels. Details are on page 16.
• In case you hear only sound and don’t see any picture in S-Video or Video (CVBS) mode. Please check if
you have connected Video signal to S-Video or Video (CVBS) input. Only one of the two video inputs can
be connected to sound. This means that the same sound can be heared in S-Video and Video (CVBS)
mode.
No Sound
• Press the VOL+ and VOL- buttons to adjust the volume.
• Press the MUTE button on the remote control to cancel or restore the volume.
• If you have connected other equipment to the TV (such as a VCR or DVD Player), make sure the audio
cables are connected securely between the TV and the other equipment.
• Check the SOUND settings. Details are on page 19 or 21.
• In case you hear wrong sound in S-Video or Video (CVBS) mode. Please check if you have connected the
right sound signal to AV in (S-Video or Video input). Only one of the two video inputs can be connected
to sound, but both video signals can be connected. This means that only one of the two sound inputs can
be heared in S-Video and Video (CVBS) mode.
Remote Control does not work.
• Check the batteries. If necessary, replace them with two AAA heavy duty (zinc chloride) or alkaline
batteries.
• Clean the remote control as well as the remote control sensor on the front of the TV.
• Check the TV power cord. Disconnect the power cord from the power outlet for 10 seconds, then rein
sert the plug into the outlet. Press POWER to turn on the TV again.
• Make sure the outlet is not on a wall switch.
• Make sure a fuse has not blown at the power outlet.
• Always point the remote control toward the front of the TV (toward the remote sensor).
• Make sure that you use the supplied Magnavox Remote control, only the supplied Magnavox Remote
control can be used with this LCD-TV set.
TV displays wrong channel or no channels.
• Repeat channel selection.
• Add the channel number(s) into the TV’s memory. Use STORE. Details are on page 15.
• Make sure TUNER MODE is set correctly. Details are on page 15.
Then activate AUTO PROGRAM to set up all available channels. Details are on page 16.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
CARE AND CLEANING
WARNING concerning stationary images on the TV
Screen: Do not leave fixed images on the screen for extended periods of time. This can cause uneven aging of the LCD
panel. Normal use of the TV should involve viewing of programs that have constantly moving or changing images. Do not
leave onmoving images on screen for extended periods of time. Do not display the same images too frequently; if you
do, subtle “ghost” images can be left on the LCD screen. Sources of stationary images may be Laser discs, video games,
Compact Discs Interactive (CD-i), or paused Digital Video Discs (DVDs) or video tapes.
Here are some common examples of stationary images:
• DVD menus list DVD content.
• Letterbox black bars appear at the top and bottom of the TV screen when a wide screen (16:9) movie is viewed on a
TV with standard (4:3) aspect ratio. This is available with some DVDs.
• Video game images and scoreboards
• Television station logos cause a problem if they are bright and stationary. Moving or low-contrast graphics are
less likely to damage the picture tube.
• Stock market tickers may appear at the bottom of the TV screen if the TV programming covers this news.
• Shopping channel logos, pricing displays may be bright and may appear constantly during the show.
These are usually in the same location on the TV screen.
TV Location
• To avoid cabinet warping, cabinet color changes, and an increased chance of TV failure, do not place the TV
where temperatures can become excessively hot (for example, in direct sunlight or near a heating appliance).
• Allow a free flow of air around the TV.
Cleaning
• To avoid possible shock hazard, remove the TV’s power cord from the electrical outlet before cleaning.
• Regularly dust the TV with a dry, non-scratching duster.
• When cleaning the TV, take care not to scratch or damage the screen surface. Avoid wearing jewelry or using
anything abrasive. Do not use household cleaners. Wipe the screen with a clean cloth dampened with water.
Use even, easy, vertical strokes when cleaning.
• Occasionally vacuum the vents on the rear of the TV.
• Never use thinners, insecticide sprays, or other chemicals on or near the cabinet. They may blemish the cabinet
permanently.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
INDEX
A
W
Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . .4, 8
Audio In jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Auto Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4, 16, 24
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1, 2, 4, 40
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
B
Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4, 21, 30
Bass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4, 21, 30
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20, 29
C
Cable Box Connections . . . . . . . . . . . . . . . . . . . . . . . . . 4, 9
Cable TV Connection . . . . . . . . . . . . . . . . . . . . . . . . . . .4, 8
Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Channel Edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 17
Closed Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4, 28
Color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
F
Factory Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 38, 39
Factory Service Information . . . . . . . . . . . . . . . . . . . . . .38
Factory reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
I
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 35
L
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4, 14
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 39
M
Mono . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 21,30
P
PC (Monitor) Connection . . . . . . . . . . . . . . . . . . . . . . 4, 13
R
Regulatory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
S
S-Video Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4, 7, 19, 21, 30, 33
Sound Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Stereo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 7, 9, 21, 30
T
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Tint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Treble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4, 21, 30
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
TV Operation (Basic) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Download from Www.Somanuals.com. All Manuals Search And Download.
35
REGULATORY
FEDERAL COMMUNICATIONS COMMISSION (FCC) NOTICE (U.S. ONLY)
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Use only RF shielded cable with ferrite core when connecting this monitor to a computer device.
•
•
•
RF shield cable with ferrite core can be obtain from multiple retail outlets or Philips Factory Service Center.
The RF shield cable with ferrite core part number is 3138 198 71441.
If your RF shield cable without ferrite core, you can obtain the ferrite core from Philips Factory Service
Center, installation as following.
1. Open the ferrite core.
2. Locate the video connector that goes to the computer and
plugs into the unit. Place the ferrite core as close to the
video connector as possible, as shown in the figure below.
Interface cable
Ferrite Core
Installation
To ensure compliance of this unit to the
Class B limits of the FCC Rules, Part 15,
Video connector
Subpart B.
This kit must be utilized when
“non-ferrited” video cables are used
with this unit. This instruction sheet
gives the details for proper installation.
Ferrite Core
3. Lock the ferrite core.
Additional FCC information may be
found in the radio frequency interference
statement located in the user’s manual.
4. Place two cable tie wrap on either side of the ferrite core
to prevent it from sliding down the cable, as shown in the
figure below.
Cable tie
5. Draw the tie wraps tight and cut off the excess leads.
To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or excessive moisture.
THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN
INTERFERENCE-CAUSING EQUIPMENT REGULATIONS.
Download from Www.Somanuals.com. All Manuals Search And Download.
36
REGULATORY
COMMISSION FEDERALE DE LA COMMUNICATION (FCC DECLARATION)
Cet équipement a été testé et déclaré conforme auxlimites des appareils numériques de
class B,aux termes de l’article 15 Des règles de la FCC. Ces limites sont conçues de façon
à fourir une protection raisonnable contre les interférences nuisibles dans le cadre d’une
installation résidentielle. CET appareil produit, utilise et peut émettre des hyperfréquences
qui, si l’appareil n’est pas installé et utilisé selon les consignes données, peuvent causer des
interférences nuisibles aux communications radio. Cependant, rien ne peut garantir l’absence
d’interférences dans le cadre d’une installation particulière. Si cet appareil est la cause
d’interférences nuisibles pour la réception des signaux de radio ou de télévision, ce qui peut
être décelé en fermant l’équipement, puis en le remettant en fonction, l’utilisateur pourrait
essayer de corriger la situation en prenant les mesures suivantes:
•
•
•
•
Réorienter ou déplacer l’antenne de réception.
Augmenter la distance entre l’équipement et le récepteur.
Brancher l’équipement sur un autre circuit que celui utilisé par le récepteur.
Demander l’aide du marchand ou d’un technicien chevronné en radio/télévision.
Toutes modifications n’ayant pas reçu l’approbation des services compétents en matière de
conformité est susceptible d’interdire à l’utilisateur l’usage du présent équipement.
N’utiliser que des câbles RF blindés avec ame en ferrite pour les connections avec des ordinateurs ou périphériques.
•
Vous pouvez vous procurer le câble de blindage RF avec tore magnétique dans les différents magasins de détails
ou au centre de service d’usine Phillips.
•
•
Le numéro de pièce du câble de blindage RF avec tore magnétique est 3138 198 71441.
Si votre câble de blindage RF ne possède pas de tore magnétique, vous pouvez l’obtenir auprès du centre de
service d’usine Phillips. Suivez les instructions ci-dessous pour l’installation.
1. Ouvrez le tore magnétique.
2. Localisez le connecteur d’écran allant dans l’ordinate ur et
se branchant dans l’unité. Placez le tore magnétique aussi
près possible du connecteur d’écran comme illustré dans
la figure ci-dessous.
Connecteur d’écran
Câble d’interface
Installation du
tore magnétiqu
Pour assurer la conformité de cette unité avec
les limites de la Classe B des règlements de
la FCC, partie 15, sous-partie B.
Cet ensemble doit être utilisé lorsque des câbles
vidéo « sans magnétisme » sont utilisés avec cette unité.
Cette feuille d’instructions vous donne les détails
concernant l’installation adéquate.
Tore Magnétique
3. Verrouillez le tore magnétique.
4. Placez deux attaches à tête d’équerre de câble sur l’un des
deux côtés du tore ma gnétique pour l’empêcher de glisser
le long du câble, comme illustré ci-dessous.
Des renseignements FCC additionnels peuvent être
trouvés dans l’énoncé d’interférence des radiofréquences
contenus dans le manuel de l’utilisateur.
Attache de câble
Tirez les attaches à tête d’équerre pour enlever le surplus
des broches de raccordement.
5.
CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT SUR LE
MATERIEL BROUILLEUR DU CANADA.
Download from Www.Somanuals.com. All Manuals Search And Download.
37
FACTORY SERVICE LOCATIONS
Philips Factory Service
P.O. Box 671539
Marietta, Ga. 30006-0026
1-800-705-2000
In Canada
To obtain efficient and expedient carry-in, mail-in, or in-home service for your product, please contact Magnavox
at:
1-800-661-6162 (French speaking)
1-800-705-2000 (English or Spanish speaking)
Au Canada
Comment obtenir le service après-vente pour les produits apportés ou envoyés par la poste à notre
centre de service ou le service à domicile, veuillez contacter Magnavox á:
1-800-661-6162 (Francophone)
1-800-705-2000 (Anglais ou Espagnol)
En el Canadá
Cómo recibir servicio efficiente para su producto, en persona, por correo o a domicillo, favor de comunicarse con
Magnavox al:
1-800-661-6162 (francófono)
1-800-705-2000 (Inglés o Español))
Download from Www.Somanuals.com. All Manuals Search And Download.
38
LIMITEDWARRANTY
LCD TV
90 Days Free Labor
One Year Parts Exchange
This product must be carried in for service.
WHO IS COVERED?
MAKE SURE YOU KEEP...
You must have proof of purchase to receive warranty service.
A sales receipt or other document showing that you pur-
chased the product is considered proof of purchase.
Please keep your sales receipt or other document showing proof
of purchase. Attach it to this owner’s manual and keep both
nearby. Also keep the original box and packing material in case you
need to return your product.
WHAT IS COVERED?
Warranty coverage begins the day you buy your product.
For 90 days thereafter, all parts will be repaired or replaced
free, and labor is free. From 90 days to one year from the day
of purchase, all parts will be repaired or replaced free, but
you pay for all labor charges. After one year from the day of
purchase, you pay for the replacement or repair of all parts,
and for all labor charges.
BEFORE REQUESTING SERVICE...
Please check your owner’s manual before requesting service.
Adjustments of the controls discussed there may save you a
service call.
TO GET WARRANTY SERVICE IN U.S.A.,
PUERTO RICO, OR U.S. VIRGIN ISLANDS...
Contact a Magnavox factory service center (see enclosed list) or
authorized service center to arrange repair.
All parts, including repaired and replaced parts, are covered
only for the original warranty period. When the warranty on
the product expires, the warranty on all replaced and repaired
parts also expires.
(In U.S.A., Puerto Rico, and U.S. Virgin Islands, all implied
warranties, including implied warranties of merchantability and
fitness for a particular purpose, are limited in duration to the
duration of this express warranty. But, because some states do not
allow limitations on how long an implied warranty may last, this
limitation may not apply to you.)
WHAT IS EXCLUDED?
Your warranty does not cover:
• labor charges for installation or setup of the product, adjust-
ment of customer controls on the product, and installation or
repair of antenna systems outside of the product.
• product repair and/or part replacement because of misuse,
accident, unauthorized repair or other cause not within the
control of Magnavox.
TO GET WARRANTY SERVICE IN CANADA...
Please contact Magnavox at:
1-800-705-2000
(In Canada, this warranty is given in lieu of all other warranties.
No other warranties are expressed or implied, including any implied
warranties of merchantability or fitness for a particular purpose.
Magnavox is not liable under any circumstances for any direct,
indirect, special, incidental or consequential damages, howsoever
incurred, even if notified of the possibility of such damages.)
• reception problems caused by signal conditions or cable or
antenna systems outside the unit.
• a product that requires modification or adaptation to enable
it to operate in any country other than the country for which
it was designed, manufactured, approved and/or authorized,
or repair of products damaged by these modifications.
• incidental or consequential damages resulting from the
product.(Some states do not allow the exclusion of incidental
or consequential damages, so the above exclusion may not
apply to you. This includes, but is not limited to, prerecorded
material, whether copyrighted or not copyrighted.)
• a product used for commercial or institutional purposes.
REMEMBER...
Please record below the model and serial numbers found on the
product. Also, please fill out and mail your warranty registration card
promptly. It will be easier for us to notify you if necessary.
MODEL # ______________________________________
SERIAL # ________________________________________
WHERE IS SERVICE AVAILABLE?
Warranty service is available in all countries where the
product is officially distributed by Magnavox. In countries
where Magnavox does not distribute the product, the local
Magnavox service organization will attempt to provide service
(although there may be a delay if the appropriate spare parts
and technical manual(s) are not readily available).
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
Magnavox, P.O. Box 671539, Marietta, Ga. 30006-0026
Download from Www.Somanuals.com. All Manuals Search And Download.
39
|