Philips DVD VCR Combo DVP3055V 19 User Manual

DVDVIDEO PLAYER /  
VIDEO CASSETTE RECORDER  
DVP 3055V  
Owner’s Manual  
Manuel de l’utilisateur  
Bedienungsanleitung  
Gebruiksaanwijzingen  
Istruzioni per l’uso  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
English ...................................................... 4  
Français ....................................................38  
Deutsch ....................................................73  
Nederlands ............................................108  
Italiano....................................................143  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
G Camera Angle......................................................................26  
G Changing the Audio Language ........................................26  
G Changing the Audio Channel ..........................................26  
G Subtitles................................................................................26  
Introduction  
Safety Precautions ............................................................2  
Index ..................................................................................3  
Contents ............................................................................4  
Before Use ......................................................................5-6  
Playable Discs ..................................................................................5  
Remote Control Operation Range ............................................5  
Precautions ......................................................................................6  
Notes on Discs ..............................................................................6  
About Symbols ................................................................................6  
Selecting theViewing Source........................................................6  
Front Panel and Display Window ....................................7  
Remote Control ................................................................8  
Rear Panel ..........................................................................9  
TM  
Operation with Audio and MP3/Windows Media  
Audio Disc ..................................................................27-28  
TM  
Playing an Audio CD and MP3/Windows Media Audio  
Disc............................................................................................27-28  
TM  
G Notes on MP3/Windows Media Audio Recordings27  
G Pause ....................................................................................28  
G Moving to another Track ..................................................28  
G Repeat Track/All/Off ..........................................................28  
G Search....................................................................................28  
G Shuffle....................................................................................28  
G Repeat A-B ..........................................................................28  
Operation with JPEG Disc..............................................29  
Viewing a JPEG disc ....................................................................29  
G Moving to another File......................................................29  
G Still Picture ..........................................................................29  
G Zoom ....................................................................................29  
G To rotate Picture ................................................................29  
G Notes on JPEG Recordings..............................................29  
Programmed Playback....................................................30  
Programmed Playback with Audio CD and MP3/Windows  
Preparation  
Connections................................................................10-11  
Connecting to a TV & Decoder................................................10  
Connecting to Optional Equipment ........................................11  
Before Operation -VCR part....................................12-16  
Using your DVD+VCR for the very first time......................12  
Setting the clock Manually..........................................................13  
To set the colour system............................................................13  
How to using the main menu....................................................14  
Tuning in TV stations Automatically ........................................14  
Tuning in TV stations Manually..................................................15  
Changing the other of TV stations ..........................................16  
Deleting TV stations ....................................................................16  
Before Operation - DVD part ..................................17-20  
General Explanation ....................................................................17  
On-Screen Display........................................................................17  
Initial Settings ..........................................................................18-20  
G General Operation ............................................................18  
G Language ..............................................................................18  
G Display ..................................................................................18  
G Audio ....................................................................................19  
G Others ..................................................................................19  
G LOCK (Parental Control) ................................................20  
TM  
Media Audio Disc ......................................................................30  
G Repeat Programmed Tracks ............................................30  
G Erasing a Track from Program list ..................................30  
G Erasing the Complete Program list................................30  
Maintenance and Service............................................................30  
G Handling the unit................................................................30  
Additional Operation ................................................31-32  
On Screen Display........................................................................31  
Tape Counter Memory Stop ....................................................31  
Child Lock......................................................................................31  
Video Doctor (Self-Diagnosis) ..................................................31  
Hi-Fi Stereo Sound System........................................................32  
Wide Screen Compatibility 16:9 ..............................................32  
To set the decoder ......................................................................32  
Last Condition Memory..............................................................32  
Special Recording............................................................33  
Copying from DVD toVCR ......................................................33  
Recording from another video recorder................................33  
Operation  
Operation withTape ..................................................21-23  
Playing a tape ................................................................................21  
G OPR (Optimum Picture Response) ..............................21  
Instant Timer Recording (ITR) ..................................................22  
Timer recording using On Screen Display ............................23  
Operation with DVD andVideo CD ........................24-26  
Playing a DVD andVideo CD....................................................24  
General Features ..........................................................................24  
G Moving to another TITLE ................................................24  
G Moving to another CHAPTER/TRACK........................24  
G Search....................................................................................24  
G Still Picture and Frame-by-Frame Playback..................24  
G Slow Motion........................................................................25  
G Repeat ..................................................................................25  
G Repeat A-B ..........................................................................25  
G Time Search ........................................................................25  
G Screen Saver........................................................................25  
G Zoom ....................................................................................26  
G Marker Search ....................................................................26  
Special DVD Features..................................................................26  
G Title Menu ............................................................................26  
G Disc Menu............................................................................26  
Reference  
Troubleshooting ..............................................................34  
Language Code List ........................................................35  
Country/Area Code list ..................................................36  
Specification ....................................................................37  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Use  
Disc-related terms  
Title (DVD only)  
Playable Discs  
DVD  
The main film content or accompanying feature content  
or additional feature content, or music album. Each title is  
assigned a title reference number enabling you to locate it  
easily.  
(8 cm / 12 cm disc)  
Video CD (VCD)  
(8 cm / 12 cm disc)  
Chapter (DVD only)  
Sections of a picture or a musical piece that are smaller  
than titles.  
Audio CD  
(8 cm / 12 cm disc)  
In addition, this unit can play DVD R, DVD RW,  
SVCD, and CD-R or CD-RW that contains audio  
titles, MP3/Windows Media Audio and/or JPEG  
A title is composed of one or several chapters. Each  
chapter is assigned a chapter number, enable you to locate  
the chapter you want. Depending on the disc, no chapters  
may be recorded.  
TM  
files.  
Track  
This indicates a product feature that is capable of  
playing DVD-RW discs recorded withVideo  
Recording format.  
Sections of a picture or a musical piece on a video CD or  
an audio CD. Each track is assigned a track number,  
enabling you to locate the track you want.  
Notes  
Scene  
– Depending on the conditions of the recording  
equipment or the CD-R/RW (or DVD R/ RW) disc itself,  
some CD-R/RW (or DVD R/ RW) discs cannot be  
played on the unit.  
– Do not attach any seal or label to either side (the labeled  
side or the recorded side) of a disc.  
On a video CD with PBC (Playback control) functions,  
moving pictures and still pictures are divided into  
sections called “Scenes”. Each scene is displayed in the  
menu screen and assigned a scene number, enabling you to  
locate the scene you want.A scene is composed of one or  
several tracks.  
– Do not use irregular shaped CDs (e.g., heart-shaped or  
octagonal). It may result in malfunctions.  
Types of video CDs  
Notes on DVDs andVideo CDs  
There are two types of video CDs:  
Some playback operations of DVDs andVideo CDs may  
be intentionally fixed by software manufacturers.As this  
unit plays DVDs andVideo CDs according to disc content  
designed by the software manufacturer, some playback  
features of the unit may not be available, or other  
functions may be added.  
Refer also to the instructions applied with the DVDs and  
Video CDs. Some DVDs made for business purposes may  
not be played on the unit.  
Video CDs equipped with PBC (Version 2.0)  
PBC (Playback control) functions allow you to interact  
with the system via menus, search functions, or other  
typical computer-like operations. Moreover, still pictures of  
high resolution can be played if they are included in the  
disc.  
Video CDs not equipped with PBC (Version 1.1)  
Operated in the same way as audio CDs, these discs allow  
playback of video pictures as well as sound, but they are  
not equipped with PBC.  
Regional code of the DVD player and DVDs  
This DVD player is designed and manufactured for  
2
playback of region “2” encoded DVD software.  
The region code on the labels of some DVD discs  
indicates which type of player can play those discs.This  
unit can play only DVD discs labeled “2” or “ALL”. If you  
try to play any other discs, the message “Check Regional  
Code” will appear on the TV screen. Some DVD discs may  
not have a region code label even though their playback is  
prohibited by area limits.  
Remote Control Operation Range  
Point the remote control at the remote sensor and press  
the buttons.  
G Distance:About 23 ft (7 m) from the front of the  
remote sensor  
G Angle: About 30° in each direction of the front of the  
remote sensor  
Remote control battery installation  
Detach the battery cover on the rear of the  
remote control, and insert two (size AA)  
batteries with  
and  
aligned correctly.  
Caution  
Do not mix old and new batteries. Never mix different  
types of batteries (standard, alkaline, etc.).  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Use (Cont’d)  
Cleaning discs  
Precautions  
Fingerprints and dust on the disc can cause poor picture  
quality and sound distortion. Before playing, clean the disc  
with a clean cloth.Wipe the disc from the center out.  
Handling the unit  
When shipping the unit  
The original shipping carton and packing materials come in  
handy. For maximum protection, re-pack the unit as it was  
originally packed at the factory.  
When setting the unit  
The picture and sound of a nearby TV or radio may be  
distorted during playback. In this case, position the unit  
away from the TV or radio, or turn off the unit after  
removing the disc.  
Do not use strong solvents such as alcohol, benzine,  
thinner, commercially available cleaners, or anti-static spray  
intended for older vinyl records.  
To keep the surface clean  
Do not use volatile liquids, such as insecticide spray, near  
the unit. Do not leave rubber of plastic products in  
contact with the unit for a long period of time.They will  
leave marks on the surface.  
About Symbols  
About the  
symbol display  
” may appear on the TV screen during operation.  
This icon means the function explained in this owner’s  
manual is not permitted by the DVD+VCR or is not  
available on that specific DVD video disc.  
Cleaning the unit  
To clean the cabinet  
Use a soft, dry cloth. If the surfaces are extremely dirty,  
use a soft cloth lightly moistened with a mild detergent  
solution. Do not use strong solvents, such as alcohol,  
benzine, or thinner, as these might damage the surface of  
the unit.  
About the disc symbols for instructions  
A section whose title has one of the following symbol is  
applicable only to the disc represented by the symbol.  
DVD  
DVD  
To obtain a clear picture  
VCD2.0  
Video CDs with the PBC (playback control)  
function.  
The DVD player is a high-tech, precision device. If the  
optical pick-up lens and disc drive parts are dirty or worn  
down, the picture quality will be poor.  
Regular inspection and maintenance are recommended  
after every 1,000 hours of use. (This depends on the  
operating environment.)  
VCD1.1  
Video CDs without the PBC (playback control)  
function.  
CD  
Audio CDs.  
MP3  
MP3 disc.  
For details, please contact your nearest dealer.  
JPEG  
JPEG disc.  
Notes on Discs  
Handling discs  
Do not touch the playback side of the disc.  
Hold the disc by the edges so that fingerprints will not get  
on the surface.  
Selecting theViewing Source  
Do not stick paper or tape on the disc.  
You must select one of your output sources (DVD or  
VCR) to view on the TV screen.  
G If you want to view DVD deck output source:  
Press DVD on the remote or SOURCE on the front panel  
and output source of DVD deck is viewed on theTV screen.  
G If you want to viewVCR deck output source:  
PressVCR on the remote or SOURCE on the front panel  
and output source ofVCR deck is viewed on the TV  
screen.  
Storing discs  
After playing, store the disc in its case.  
Do not expose the disc to direct sunlight or sources of  
heat, or leave it in a parked car exposed to direct sunlight,  
as there may be a considerable temperature increase  
inside the car.  
Notes  
G If you insert a disc while the DVD+VCR is in theVCR  
mode, the DVD+VCR will switch to DVD mode  
automatically.  
G If you insert a cassette tape without prevention tab while  
the DVD+VCR is in the DVD mode, the DVD+VCR will  
switch toVCR mode automatically.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front Panel and Display Window  
Display window  
Shows the current status of the unit.  
Remote Sensor  
Point the remote control here.  
PAUSE( \ \ )  
Pause palyback  
DiscTray  
Insert a disc here.  
temporarily/ frame-  
by-frame playback.  
Tape Compartment  
Audio IN  
(L/R) Jacks  
DVD OPEN/CLOSE (  
Opens or closes the disc tray.  
)
STOP ( x ) Stops playback.  
Video IN Jack  
Forward Skip/Scan/Fast-Forward  
Go to NEXT chapter/track.Press and hold for  
two seconds for a fast forward search.  
Winds the tape forwards.  
EJECT (  
Tape Eject.  
)
SOURCE  
DVD/VCR Selector  
PLAY ( N ) Starts playback.  
VCR Record  
Reverse Skip/Scan, Rewind  
Go to beginning of current chapter/track or to  
PREVIOUS chapter/track. Press and hold for two  
seconds for a fast reverse search.  
Rewinds the tape.  
CHANNEL 3 4  
Channel selection  
DVD toVCR copy  
POWER  
Switches the unit to ON or OFF.  
Child Lock is engaged.  
DVD+VCR is in timer recording or a timer  
recording is programmed  
A cassette is in theVCR deck.  
Indicates repeat mode.  
Indicates the Progressive Scan  
VCR deck is selected.  
is set to On mode.  
VCR recording is engaged.  
DVD toVCR copy is in  
progress.  
A disc is loaded in the DVD deck.  
(Lights when a disc is loaded in the DVD tray and  
flashes when no disc is loaded.)  
Indicates TV mode.  
(See Notes on page 22.)  
DVD tray is selected.  
DVD  
P
VCR  
REC  
TV  
Indicates total playing time, elapsed time, or current deck status  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
DVD/VCR select button  
Select the output source (DVD orVCR) to  
view on the TV screen.  
POWER  
Switches DVD+VCR ON and OFF.  
EJECT, OPEN/CLOSE  
- Opens and closes the disc tray.  
- Ejects the tape in theVCR deck.  
TV/VIDEO  
To view channels selected by theVCR tuner  
or by the TV tuner.  
RETURN  
0-9 numerical buttons  
Selects numbered options in a menu.  
Displays the menu of aVideo CD with PBC.  
DISPLAY  
DISC MENU  
Accesses menu on a DVD disc.  
Accesses On-Screen display.  
Switches among the clock, tape counter and  
tape remaining modes.  
TV/VIDEO DVD  
VCR OPEN/CLOSE  
SYSTEM MENU  
Accesses or removes DVD setup menu and  
VCR menu.  
b/B/v/V (left/right/up/down)  
- Selects an option in the menu  
- v/V: Selects channel ofVCR.Adjusts  
manually the tape’s picture onscreen.  
1
4
2
5
8
0
3
6
SKIP ./REW  
Skip to beginning of current chapter or  
track, press twice in quick successions to go  
to previous chapter or track.  
Press and hold button for about two  
seconds to search backward. (For DVD only)  
Rewinds the tape during the STOP mode or  
for fast reverse picture search.  
OK  
7
9
- Acknowledges menu selection.  
- Displays functions on the TV screen.  
RETURN  
DISPLAY  
STOP  
Stops playback.  
DISC  
SYSTEM  
MENU  
MENU  
PLAY  
Starts playback.  
SKIP > /FWD  
Skip to next chapter or track.  
Press and hold button for about two  
seconds to search forward.(For DVD only)  
Advances the tape during the STOP mode or  
for fast forward picture search.  
OK  
PAUSE/STEP  
Pause playback or recording  
Press repeatedly for frame-by-frame playback  
during pause.  
PLAY  
STOP  
PAUSE/STEP  
SUBTITLE  
MARKER  
Marks any point during playback.  
Selects a subtitle language.  
MARKER SEARCH INPUT RECORD  
SUBTITLE AUDIO ANGLE ZOOM  
AUDIO  
Selects an audio language (DVD).  
SEARCH  
Displays MARKER SEARCH menu.  
ANGLE  
INPUT  
To select theVCR deck’s source  
(Tuner,AV1,AV2 or AV3).  
Selects a DVD camera angle if available.  
REPEAT REPEAT PROGRAM CLEAR  
A-B  
ZOOM  
Enlarges DVD/VCD video image.  
RECORD  
Records normally or activates Instant Timer  
Recording with repeated presses.  
TITLE SHUFFLE CHILDLOCK SPEED  
TITLE  
Displays the disc’s Title menu, if  
available.  
REPEAT  
Repeat chapter, track, title, all.  
SHUFFLE  
- Plays tracks in random order.  
REPEAT A-B  
Repeats sequence.  
CHILD LOCK  
Switch the Child Lock on and off.  
PROGRAM  
Accesses or removes Program menu.  
SPEED  
Selects recording speed.  
CLEAR  
- Resets tape counter to M 0:00:00  
- Removes a track number on the  
program menu or a mark on the  
MARKER SEARCH menu.  
Note  
This remote control use the same buttons forVCR and DVD  
functions (ex. PLAY).  
When using aVCR, first press theVCR button.  
When using a DVD, first press the DVD button.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rear Panel  
VIDEO/AUDIO OUT(Left/Right) (DVD/VCR OUT)  
Connect to a TV with video and audio inputs.  
COMPONENT/PROGRESSIVE SCANVIDEO OUT (Y Pb Pr)  
(DVD EXCLUSIVE OUT)  
Connect to a TV withY Pb Pr inputs.  
AERIAL  
Connect the aerial  
using this jack.  
AUDIO OUT (Left/Right) (DVD EXCLUSIVE OUT)  
Connect to an amplifier, receiver or stereo system.  
EURO AV2 DECODER  
Connect to pay-TV decoder or another video recorder.  
S-VIDEO OUT (DVD EXCLUSIVE OUT)  
Connect to a TV with S-Video input.  
EURO AV1 AUDIO/VIDEO (VCR IN+OUT/DVD OUT)  
Connect to your TV set or another video recorder.  
COAXIAL (Digital audio out jack) (DVD EXCLUSIVE OUT)  
Connect to digital (coaxial) audio equipment.  
RF OUT  
Connect to your TV using this jack.  
AC Power Cord  
Connect to a power source.  
Caution  
Do not touch the inner pins of the jacks on the  
rear panel. Electrostatic discharge may cause  
permanent damage to the unit.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Tips  
G If your TV does not accept the Progressive Scan format,  
the picture will appear scrambled if you try Progressive  
Scan on the DVD Player.  
G Depending on your TV and other equipment you wish to  
connect, there are various ways you could connect the  
unit.  
G Please refer to the manuals of your TV, Stereo System or  
other devices as necessary to make the best connections.  
G For better sound reproduction, connect this unit’s AUDIO  
OUT jacks to the audio in jacks of your amplifier, receiver,  
stereo or audio/video equipment. See “Connecting to  
optional equipment” on page 11.  
Connect the COMPONENT/ PROGRESSIVE  
1
2
SCANVIDEO OUT jacks on the DVD Player to the  
corresponding in jacks on the TV using theY Pb Pr  
cable.  
Connect the Left and Right AUDIO OUT jacks of the  
DVD Player to the audio left/right in jacks on the TV  
using the audio cables.  
Caution  
Notes  
– Make sure this unit is connected directly to the TV. Set the  
TV to the correct video input channel.  
– Do not connect this unit’s AUDIO OUT jack to the  
phono in jack (record deck) of your audio system.  
– Set the Progressive to “On” on the setup menu for  
progressive signal, see page 18.  
– Progressive scan does not work with the analog video  
connections (yellowVIDEO OUT jack) or S-VIDEO  
connection.  
Connecting to aTV & Decoder  
G Make one of the following connections, depending on the  
capabilities of your existing equipment.  
Rear of this unit (DVD exclusive out connection)  
Basic connection (AV)  
Connect the EURO AV1 AUDIO/VIDEO on the rear  
1
2
panel of this unit to the SCART input socket on the TV  
using a SCART lead.  
Some TV broadcasters transmit encoded television signals  
which you can only see with a purchased or rented  
decoder.You can connect such a decoder (descrambler) to  
the DVD+VCR.  
Basic connection (RF)  
Connect the RF antenna cable from your indoor/ outdoor  
1
2
antenna to AERIAL jack on the rear panel of this unit.  
Rear of TV  
Connect the supplied RF antenna cable from the RF OUT  
jack on the rear panel of this unit to your television’s  
Antenna Input.  
VIDEO  
INPUT  
COMPONENT VIDEO INPUT/  
PROGRESSIVE SCAN  
S-VPUT  
AERIAL  
AUDIO INPUT  
SCART INPUT  
Pr  
Pb  
Y
L
R
DVD exclusive out connection  
®
G ComponentVideo (Color Stream ) connection  
Decoder  
Connect the COMPONENT/PROGRESSIVE  
1
SCANVIDEO OUT jacks on the DVD Player to the  
corresponding in jacks on the TV using theY Pb Pr  
cable.  
Connect the Left and Right AUDIO OUT jacks of the  
DVD Player to the audio left/right in jacks on the TV  
using the audio cables.  
2
G S-Video connection  
Connect the S-VIDEO OUT jack on this unit to the S-  
1
2
Video input jack on the TV using the S-Video cable.  
Rear of this unit (Basic connection)  
Connect the Left and Right AUDIO OUT jacks of the  
DVD Player to the audio left/right in jacks on the TV  
using the audio cables.  
Note  
– If the TV has an S-video input, connect the DVD player  
with the S-video cable.When using an S-video cable, do  
not connect the yellow video cable.  
®
Progressive Scan (ColorStream Pro) connection  
G If your television is a high-definition or “digital ready”  
television, you may take advantage of the DVD Player’s  
progressive scan output for the highest video resolution  
possible.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections (Cont’d)  
Notes  
Connecting to Optional  
Equipment  
– If the audio format of the digital output does not match  
the capabilities of your receiver, the receiver will  
produce a strong, distorted sound or no sound at all.  
To see the audio format of the current DVD in the  
On-Screen Display, press AUDIO.  
Connecting to an amplifier equipped with two  
channel analog stereo or Dolby Pro Logic II/ Pro  
Logic  
Connect the Left and Right DVD/VCR AUDIO OUT or  
AUDIO OUT (DVD EXCLUSIVE OUT) jacks on this  
unit to the audio left and right in jacks on your amplifier,  
receiver or stereo system, using the audio cables.  
Connecting to an amplifier equipped with two  
channel digital stereo (PCM) or to an Audio/Video  
receiver equipped with a multi-channel decoder  
(Dolby Digital™ or MPEG 2)  
Connect one of this unit’s DIGITAL AUDIO OUT jack  
(COAXIAL) to the corresponding in jack on your  
amplifier. Use an optional digital (coaxial) audio cable.  
1
2
You will need to activate this unit’s digital output. (See  
“Audio” on page 19).  
Digital Multi-channel sound  
A digital multi-channel connection provides the best  
sound quality. For this you need a multi-channel  
Audio/Video receiver that supports one or more of the  
audio formats supported by your unit (MPEG 2 and Dolby  
Digital). Check the receiver manual and the logos on the  
front of the receiver.  
Rear of this unit  
2 channel analog stereo or Dolby Pro Logic II/Pro Logic connection.  
DVD exclusive out  
DVD/VCR OUT  
Digital multi-channel connection (DVD exclusive out connecttion)  
R
L
COAXIAL  
OPTICAL  
DIGITAL INPUT  
DIGITAL INPUT  
AUDIO INPUT  
Amplifier (Receiver)  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Operation - VCR part  
Using your DVD+VCR for the very first time  
For the following steps we assume that you have just  
connected your DVD+VCR for the very first time.  
To make tuning TV stations an easy task your DVD+VCR  
incorporates the Automatic Channel Memory  
System (ACMS).This system will automatically tune,  
store TV channels and set the clock (date & time) in your  
DVD+VCR.  
Make sure that you have correctly installed your  
DVD+VCR.  
1
Press 1 to turn on your DVD+VCR.  
If the initial Menu Screen doesn’t appear on screen, make  
sure that you have tuned your TV to a video channel. Or if  
this is correct it may mean that your DVD+VCR is already  
tuned.  
Press b or B to select the desired country.  
2
(A:Austria, B: Belgium,CH: Switzerland, D: Germany, DK:  
Denmark, E: Spain, F: France, I: Italy, N: Norway, NL:  
Netherlands, P: Portugal, S:Sweden, SF: Finland, OTHERS)  
A
N
B
NL  
CH  
P
D
S
DK  
E
F
I
SF OTHERS  
Pr-12  
ACMS  
OK  
i
Press OK to start the automatic tuning process.  
3
01  
02  
03  
C02  
C03  
C04  
00  
00  
00  
TF 1  
FR 2  
FR 3  
S
E
Pr-12  
i
ACMS  
Programme number  
TV Station  
TF 1  
PR01  
PR02  
PR03  
PR04  
PR05  
PR06  
FR 2  
FR 3  
ARTE  
TV 1  
TV 2  
The TV station shown above may vary according to the  
area you live in.  
Press SYSTEM MENU to remove the menus from  
4
theTV screen.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Operation - VCR part  
Setting the clock Manually  
To set the colour system  
Press SYSTEM MENU.  
The clock in your DVD+VCR controls time and date  
settings for your DVD+VCR.  
1
The clock is set automatically during ACMS (Automatic  
Channel Memory System) when you DVD+VCR detects a  
channel that broadcasts a Teletext signal. If the broadcast  
signal is weak the clock will not be set and will require  
setting manually.  
The main menu will appear on the TV screen.  
2
Press 1 or 2 to select the SYS and press OK.  
3
Press 3 or 4 to select according to the COLOUR  
system used.  
4
Press SYSTEM MENU.  
Press b or B to select SET.  
Press OK.  
The auto adjust mode can be set to ‘OFF’ by pressing  
OK if you want to set the time manually.  
1
AUTO  
PAL  
SYS  
NIC  
SECAM  
REC  
AUD  
MESECAM  
SYS  
ON  
OFF  
DECO-  
i
DER  
HH MM DD MM YY  
:
-
-
.
.
- - - - -  
- -  
- -  
- -  
Press SYSTEM MENU to remove the menus from the  
5
TV screen.  
ACSS : ON  
1
2
SET  
OK  
i
Use 3 or 4 on the remote control to alter the  
HOURS, MINUTES, DAY, MONTH and YEAR.  
Please note your DVD+VCR uses a 24 hour clock. e.g.  
1pm will be displayed as 13:00.  
2
The day of the week will appear automatically when you  
enter the year.  
HH MM DD MM YY  
8
:
00  
1
.
01  
.
05 SAT  
ACSS : OFF  
1
2
SET  
OK  
i
If you make a mistake press b or B and enter the  
correct details.  
3
4
Press SYSTEM MENU.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Operation - VCR part  
How to using the main menu  
Tuning inTV Stations  
Automatically  
ThisVCR can easily be programmed by using the menus  
displayed on screen.  
If the TV broadcast signal is weak yourVCR may not  
detect the necessary information and will not be able to  
store them correctly.To overcome this problem please  
turn to the MANUAL TUNING section on page 15.  
The menus are controlled from the Remote Control  
Handset.  
Switch on yourTV set and video recorder by pressing the  
1
2
1 button.  
Press 1 to turn on yourVCR.  
1
2
Press SYSTEM MENU button.  
The main menu will appear on the TV screen.  
Press SYSTEM MENU button.  
The main menu will appear on the TV screen.  
Press 1 or 2 to select the ACMS.  
Press OK.  
1
2
Pr-12  
P
SET  
SYS  
SET  
REC  
AUD  
ACMS  
R
+
-
REC  
OK  
NIC  
f
OSD  
ON  
OFF  
DECO-  
DER  
i
1
2
Pr-12  
P
SET  
SYS  
NIC  
SET  
REC  
AUD  
ACMS  
R
Pr-12  
+
-
ACMS  
f
OSD  
DECO-  
DER  
ON  
OFF  
OK  
i
G REC - Timer recording setting (see p. 23).  
G PR SET - Manual tuning setting (see p. 15).  
G ACMS - ACMS (Automatic Channel Memory System)  
(see p. 14).  
G SET - Date & clock setting (see p. 13).  
G SYSTEM - To set the Colour TV System (see p. 13).  
G Dr. - To check a problem with yourVCR (see p. 31).  
G AUDIO - To select the channel for audio output  
(see p. 32).  
A
N
B
NL  
CH  
P
D
S
DK  
E
F
I
SF OTHERS  
Pr-12  
ACMS  
OK  
i
G F.OSD ON/OFF - To display the operational  
mode of yourVCR (see p. 31).  
G 16:9/4:3 - To select the aspect ratio of your TV  
(see p. 32).  
G DECODER - To use a pay-TV decoder (or Satellite)  
with yourVCR (see p. 32).  
G OPR - To improve the playback picture (see p. 21).  
G NIC - To activate or deactivate the NICAM digital  
sound (see p. 32).  
Press 1 or 2 to select COUNTRY.  
3
4
(A:Austria, B:Belgium, CH:Switzerland, D:Germany,  
DK:Denmark, E:Spain, F:France, I:Italy, N:Norway,  
NL:Nertherlands, P:Portugal, S:Sweden, SF:Finland,  
OTHERS)  
Press OK again to start the automatic tuning process.  
TheVCR’s clock will be set automatically when  
automatic tuning has finished. If the clock is wrong, see  
“Setting the clock manually” on page 13).  
Tip  
You can change the menu language on the DVD setup menu.  
(See the Menu Language on page 18.)  
01  
02  
03  
C02  
C03  
C04  
00  
00  
00  
TF 1  
FR 2  
FR 3  
Press 1 and 2 to select the desired menu.  
Press OK and use 3 or 4 to select.  
3
4
Press SYSTEM MENU to return to a TV picture.  
S
E
Pr-12  
i
ACMS  
The TV STATIONTABLE will appear when tuning is  
complete.  
Press SYSTEM MENU to save your settings.  
01  
02  
03  
04  
05  
06  
07  
08  
C02  
C03  
C04  
C05  
C06  
C07  
C08  
C09  
00  
00  
00  
00  
00  
00  
00  
00  
TF 1  
FR 2  
FR 3  
ARTE  
TV 1  
TV 2  
SVT  
SVT 1  
MOVE :  
DELETE :  
P
SET  
,
OK  
i
R
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Operation - VCR part  
Press 2 to select STATION so that you may name  
your TV station.  
Press OK.  
Tuning inTV Stations Manually  
5
6
In certain areas of the country broadcast signals may be  
too weak for yourVCR’s automatic tuning process to find  
or assign TV stations correctly.  
You must tune in these weaker broadcast stations  
manually in order for yourVCR to store them.  
PR  
C09  
CH  
C10  
MFT  
00  
STATION  
Press SYSTEM MENU.  
1
2
The main menu will appear on the TV screen.  
Press 1 or 2 to select the PR SET.  
Press OK.  
P
SET  
OK  
i
R
Use 3 or 4 to select letters and numbers for the  
new station name.  
Use 1 or 2 to move back and forth between  
characters.  
PR  
01  
CH  
C 02  
MFT  
00  
STATION  
PR-01  
Press OK.  
1
2
Pr-12  
P
SET  
SYS  
NIC  
SET  
REC  
AUD  
ACMS  
R
P
SET  
+
-
R
f
OSD  
ON  
OFF  
DECO-  
DER  
P
OK  
i
SET  
OK  
i
R
PR  
C09  
CH  
C10  
MFT  
00  
STATION  
FR 3  
Press SYSTEM MENU.  
The station table will appear.  
Press 3 or 4 to select the programme number that you  
want to tune (for example, PR 09).  
P
SET  
OK  
i
R
Press SYSTEM MENU, confirm the station placement.  
Press SYSTEM MENU again.  
Your new TV station has now been tuned into your  
VCR.  
If you wish to manually tune other stations repeat stages  
1 - 7.  
7
01  
02  
03  
04  
05  
06  
07  
08  
C02  
C03  
C04  
C05  
C06  
C07  
C08  
C09  
00  
00  
00  
00  
00  
00  
00  
00  
PR-01  
PR-02  
PR-03  
PR-04  
PR-05  
PR-06  
PR-07  
PR-08  
MOVE :  
DELETE :  
P
SET  
,
OK  
i
R
09  
10  
C10  
- -  
00  
- -  
FR 3  
- - - - -  
- - - - -  
- - - - -  
- - - - -  
- - - - -  
- - - - -  
- - - - -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
11  
12  
13  
14  
15  
16  
Press OK.  
3
4
Press INPUT to select C (Standard stations) or S  
(Cable stations): C02 - C69, S01 - S41.  
Enter the channel number of station that you want to  
tune with the numbered buttons or use 3 or 4 to  
find the required station.  
MOVE :  
DELETE :  
P
,
OK  
i
SET  
R
Press OK and select the colour system of its channel by  
pressing 3 or 4.  
PR  
09  
CH  
C - -  
MFT  
- -  
STATION  
- - - -  
P
SET  
OK  
i
R
Press OK.  
Press 2 to select MFT.  
Control the fine tuning of the station by using 3 or 4.  
PR  
09  
CH  
C10  
MFT  
00  
STATION  
CHANNEL/CABLE : AV  
P
SET  
OK  
i
R
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Operation - VCR part  
Changing the order ofTV Stations DeletingTV Stations  
After tuning TV stations into yourVCR you may wish to  
change the order in which they are stored without having  
to retune them again.The instructions given on this page  
will show you how you can simply move them into your  
desired order.  
After tuning TV stations into yourVCR you may wish to  
delete a station.  
The instructions given on this page will show you how you  
can easily delete any unwanted TV stations.  
Press SYSTEM MENU.  
Press SYSTEM MENU.  
1
The main menu will appear on the TV screen.  
Press 1 or 2 to select the PR SET.  
Press OK.  
1
The main menu will appear on the TV screen.  
Use 1 or 2 to select the PR SET.  
Press OK.  
1
2
Pr-12  
P
SET  
SYS  
NIC  
SET  
REC  
AUD  
ACMS  
R
P
SET  
1
2
+
-
R
f
OSD  
ON  
OFF  
Pr-12  
P
SET  
SYS  
NIC  
SET  
DECO-  
DER  
REC  
AUD  
ACMS  
R
OK  
i
P
SET  
+
-
R
f
OSD  
ON  
OFF  
DECO-  
DER  
OK  
i
PR  
01  
CH  
C 02  
MFT  
00  
STATION  
PR-01  
PR  
01  
CH  
C 02  
MFT  
00  
STATION  
PR-01  
P
SET  
OK  
i
R
P
SET  
OK  
i
R
Press SYSTEM MENU.  
2
Use 3 or 4 to select the programme number you  
want to move (for example, PR 03).  
Press 2.  
Press SYSTEM MENU.  
Press 3 or 4 to select the programme number you  
want to delete. (for example, PR 03)  
2
01  
02  
03  
04  
05  
06  
07  
08  
C02  
C03  
C04  
C05  
C06  
C07  
C08  
C09  
00  
00  
00  
00  
00  
00  
00  
00  
PR-01  
PR-02  
PR-03  
PR-04  
PR-05  
PR-06  
PR-07  
PR-08  
01  
02  
03  
04  
05  
06  
07  
08  
C02  
C03  
C04  
C05  
C06  
C07  
C08  
C09  
00  
00  
00  
00  
00  
00  
00  
00  
PR-01  
PR-02  
PR-03  
PR-04  
PR-05  
PR-06  
PR-07  
PR-08  
MOVE :  
DELETE :  
MOVE :  
DELETE :  
P
SET  
,
OK  
i
R
P
SET  
R
,
OK  
i
Press 1.  
After a short while, the selected station will be deleted.  
01  
C02  
C03  
C04  
00  
00  
00  
00  
00  
00  
PR-01  
PR-02  
PR-03  
PR-04  
PR-05  
PR-06  
PR-07  
PR-08  
3
4
02  
03  
04  
05  
06  
C05  
01  
02  
03  
04  
05  
06  
C02  
00  
PR-01  
PR-02  
PR-03  
PR-04  
PR-05  
PR-06  
C06  
C07  
C08  
C09  
C03  
C05  
C06  
C04  
C07  
00  
00  
00  
00  
00  
07  
08  
00  
00  
P
SET  
OK  
i
R
07  
08  
C08  
C09  
00  
00  
PR-07  
PR-08  
MOVE :  
Use 3 or 4 to select the programme number you  
want to move to (for example, PR 05).  
P
,
DELETE :  
OK  
i
SET  
R
3
4
Press SYSTEM MENU to remove the menus from the  
TV screen.  
If you wish to delete other TV stations repeat stages  
1 - 3.  
01  
02  
03  
04  
05  
06  
07  
08  
C02  
C03  
C05  
C06  
C04  
C07  
C08  
C09  
00  
00  
00  
00  
00  
00  
00  
00  
PR-01  
PR-02  
PR-04  
PR-05  
PR-03  
PR-06  
PR-07  
PR-08  
How to select StoredTV stations:  
P
SET  
OK  
i
R
Stored TV stations can be selected in either of two ways.  
Use 3 or 4 to select different stations that are tuned into  
your DVD+VCR.  
You may also directly select stations using the numbered  
buttons on the remote control.  
Press OK.  
The selected programme will be moved to the new  
programme number.  
If you wish to move otherTV stations repeat stages 1 - 4.  
Press SYSTEM MENU to remove the menus from the  
TV screen.  
01  
02  
03  
04  
05  
C02  
C03  
C05  
C06  
C04  
00  
00  
00  
00  
00  
PR-01  
PR-02  
PR-03  
PR-04  
PR-05  
06  
07  
08  
C07  
C08  
C09  
00  
00  
00  
PR-06  
PR-07  
PR-08  
MOVE :  
P
DELETE :  
,
OK  
i
SET  
R
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Operation - DVD part  
Temporary Feedback Field Icons  
General Explanation  
Title  
RepeatTitle  
This manual gives the basic instructions for operating the  
DVD+VCR. Some DVDs require specific operation or  
allow only limited operation during playback.When this  
Chapter  
Repeat Chapter  
Track  
occurs, the symbol  
appears on the TV screen, indicating  
RepeatTrack (non-PBCVideo CDs and  
that the operation is not permitted by the DVD+VCR or  
is not available on the disc.  
Audio CD only)  
All  
Repeat Disc (non-PBCVideo CDs and  
On-Screen Display  
Audio CD only)  
A - B  
Repeat A-B  
The general playback status can be displayed on the TV  
screen. Some options can be changed on the menu.  
Off  
Repeat Off  
On-screen display operation  
Press DISPLAY during playback.  
1
Resume play from this point  
Action prohibited or not available  
Use v/V to select an item.  
Notes  
2
The selected option will be highlighted.  
G Some discs may not provide all of the features on the on-  
screen display example shown below.  
G If no button is pressed for 10 seconds, the on-screen  
display disappears.  
Use b/B to change the setting of an item.  
The number buttons can also be used for setting  
numbers (e.g., title number). For some functions, press  
OK to execute the setting.  
3
DVD  
Options  
Selection Method  
Function (Use v/V to select desired option)  
b/B, or  
Numeric, OK  
Shows the current title number and total number of titles, and  
skips to the desired title number.  
Shows the current chapter number and total number of  
chapters, and skips to the desired chapter number.  
Shows the elapsed playing time, and  
Title Number  
Chapter Number  
Time search  
1 /3  
1 /12  
b/B, or  
Numeric, OK  
0:20:09  
Numeric, OK  
searches the point by the elapsed time directly.  
VCD1.1  
VCD2.0  
Items  
Selection Method  
Function (Use v/V to select desired option)  
Shows the current track number, total number of tracks and PBC  
On mode, and skips to the desired track number.  
Shows the elapsed playing time, and  
b
/
B, or  
1 /4  
Track Number  
Time search  
Numbers, OK  
0:20:09  
Numeric, OK  
searches the point by the elapsed time directly  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Operation (Continued) - DVD part  
DVD  
TV Aspect  
Initial Settings  
4:3 : Select when a standard 4:3 TV is connected.  
16:9 : Select when a 16:9 wide TV is connected.  
You can set your own Personal Preferences on the  
player.  
DVD  
To display and exit the Menu:  
Press SYSTEM MENU to display the menu. Press  
SYSTEM MENU again to return to the initial screen.  
To go to the next level:  
Press 2 on the remote control.  
To go back to the previous level:  
Press 1 on the remote control.  
Display Mode  
Display Mode settings is only available when the TV Aspect  
mode is set to “4:3”.  
Letterbox: Displays a wide picture with bands on the  
upper and lower portions of the screen.  
Panscan: Automatically displays the wide picture on the  
entire screen and cuts off the portions that do not fit.  
Progressive Scan  
General Operation  
Progressive ScanVideo provides the highest quality  
pictures with less flickering. If you are using the  
ComponentVideo jacks for connection to a TV or  
monitor that is compatible with a progressive scan signal,  
set Progressive Scan to On.  
Press SYSTEM MENU.  
The setup menu appears.  
1
2
Use 3/4 to select the desired option then press 2 to  
move to the second level.  
The screen will show the current setting for the selected  
option, as well as alternate setting(s).  
To turn on progressive scan:  
Connect component out of this unit to the input of your  
monitor/television, set your television or monitor to  
component Input.  
Use 3/4 to select the second desired option then press  
2 to move to the third level.  
3
4
5
Select “Progressive Scan” on the “DISPLAY” menu then  
Use 3/4 to select the desired setting then press OK to  
confirm your selection.  
Some items require additional steps.  
1
press 2.  
DISPLAY  
TV Aspect  
Press SYSTEM MENU or PLAY B to exit the setup  
menu.  
Display Mode  
Progressive Scan  
Video Output  
On  
Off  
LANGUAGE  
LANGUAGE  
English  
Original  
Off  
Menu Language  
Disc Audio  
Prev.  
Move OK Enter  
Disc Subtitle  
Disc Menu  
Select “On” using the 3 / 4 buttons.  
Original  
2
3
4
Press OK to confirm your selection.The confirm menu  
will appear.  
When the confirm menu appears on your screen  
“Cancel” is highlighted as default. Use the 1 button to  
highlight “Enter”.  
Move  
Select  
Menu Language  
Press OK to set to progressive scan mode.  
Select a language for the setup menu and on-screen  
5
display.  
Caution  
DVD  
Disc Audio / Subtitle / Menu  
If you set Progressive Scan to On in error, you must reset  
Select a language you prefer for the audio track (disc  
audio), subtitles, and the disc menu.  
Original :The original language set for the disc is  
selected.  
Other :To select another language, press number buttons  
to enter the corresponding 4-digit number according to  
the language code list on page 35. If you enter the wrong  
language code, press CLEAR.  
the unit.  
1 Press and hold STOP for five seconds.  
The video output will be restored to the standard setting  
and a picture appear again on TV screen.  
2 Do not turn off this unit while the “PROGRESSIVE SCAN  
MODE” message is displayed on the TV screen.  
Video Output  
Set this unit’sVideo Output options according to the TV  
connection type.  
DISPLAY  
YPbPr:When your TV is connected with the  
COMPONENT/PROGRESSIVE SCANVIDEO OUT jacks  
on this unit.  
RGB:When your TV is connected with the SCART (RGB  
signal) jack.  
DISPLAY  
TV Aspect  
16  
:
9
Display Mode  
Progressive Scan  
Video Output  
Widescreen  
Off  
RGB  
Move  
Select  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Operation (Continued) - DVD part  
AUDIO  
Each DVD disc has a variety of audio output options. Set  
the DVD+VCR’s AUDIO according to the type of audio  
system you use.  
OTHERS  
The PBC and Auto Play settings can be changed.  
OTHERS  
PBC  
On  
Off  
AUDIO  
Auto Play  
Dolby Digital  
MPEG  
Bitstream  
PCM  
48kHz  
On  
Sample Freq.  
DRC  
Select  
Move  
VCD 2.0  
PBC  
Set Playback Control (PBC) to On or Off.  
Move  
Select  
On:Video CDs with PBC are played according to the  
PBC.  
Off:Video CDs with PBC are played the same way as  
Audio CDs.  
DVD  
Dolby Digital / MPEG  
Bitstream: Select “Bitstream” if you connected the  
DVD+VCR’s DIGITAL AUDIO OUT jack to an amplifier  
or other equipment with a Dolby Digital decoder or  
MPEG decoder.  
DVD  
Auto Play  
You can set up the DVD Player so a DVD disc  
automatically starts playing whenever the DVD is inserted.  
If Auto Play mode is set to On, this DVD player will search  
a title that playback time is long most and then play back  
the title automatically.  
PCM : Select when connected to a 2 channel digital  
stereo amplifier. DVD discs encoded in Dolby Digital or  
MPEG will automatically downmixed to two-channel PCM  
audio.  
DVD  
Sample Freq. (Frequency)  
On:Auto Play function is activated.  
To change the Sample Frequency setting, first select the  
desired Digital Audio Output as indicated as above.  
If your receiver or amplifier is NOT capable of handling  
96KHz signals, select 48KHz.When this choice is made,  
this unit will automatically convert any 96KHz signals to  
48KHz so your system can decode them.  
Off:Auto Play function is not activated.  
Note  
The Auto Play function may not work for some DVDs.  
If your receiver or amplifier is capable of handling 96KHz  
signals, select 96KHz.When this choice is made, this unit  
will pass each type of signal through without any further  
processing.  
DVD  
Dynamic Range Control (DRC)  
With the DVD format, you can hear a program’s  
soundtrack in the most accurate and realistic presentation  
possible, thanks to digital audio technology. However, you  
may wish to compress the dynamic range of the audio  
output (the difference between the loudest sounds and  
the quietest ones).Then, you may listen to a movie at a  
lower volume without losing clarity of sound. Set DRC to  
On for this effect.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Operation (Continued) - DVD part  
LOCK (Parental Control)  
Password (Security Code)  
You can enter or change password.  
LOCK  
Select “Password” on the “LOCK” menu then press 2.  
Rating  
Unlock  
New  
FR  
1
Password  
Area Code  
Follow step 2 of “Rating” on left.Change” or “New” is  
highlighted.  
2
3
4
Enter the new 4-digit code, then press OK. Input it again  
to verify.  
Press SYSTEM MENU to exit the menu.  
Move  
Select  
If you forget your Security Code  
If you forget your security code you can clear it using the  
following steps:  
DVD  
Rating  
Movies on DVDs may contain scenes not suitable for  
children.Therefore, discs may contain Parental Control  
information that applies to the complete disc or to  
certain scenes on the disc.These scenes are rated from 1  
to 8, and alternatively, more suitable scenes are available  
for selection on some discs. Ratings are  
country dependent.The Parental Control feature allows  
you to prevent discs from being played by your children  
or to have certain discs played with alternative scenes.  
Press SYSTEM MENU to display the Setup menu.  
1
Input the 6-digit number “210499” and the security code  
2
3
is cleared.  
Enter a new code as described above.  
DVD  
Area Code  
Enter the code of a country/area whose standards were  
used to rate the DVD video disc, referring to the list (See  
“Country/Area Code List”, page 36).  
Select “Rating” on the “LOCK” menu then press  
2.  
1
To access the Rating, Password and Area Code features,  
you must input the 4-digit security code you created. If  
you have not yet entered a security code you are  
prompted to do so.  
Input a 4-digit code and press OK. Enter it again and  
press OK to verify. If you make a mistake before  
pressing OK, press CLEAR and enter 4-digit security  
password again.  
2
Select “Area Code” on the “LOCK” menu then  
1
2
3
4
5
press 2.  
Follow step 2 of “Rating” on left.  
Select the first character using the 3/4 buttons.  
Shift the cursor using 2 button and select the  
Select a rating from 1 to 8 using 3/4 buttons.  
Rating 1-8: Rating one (1) has the most restrictions  
and rating eight (8) is the least restrictive.  
Unlock: If you select Unlock, Parental Control is not  
active.The disc will play in full.  
second character using 3/4 buttons.  
3
Press OK to confirm your country code  
selection.  
Note:  
If you set a rating for the DVD+VCR, all disc scenes  
with the same rating or lower will be played. Higher  
rated scenes will not be played unless an alternative  
scene is available on the disc.The alternative must have  
the same rating or a lower one. If no suitable alternative  
is found, playback will stop.You must enter the 4-digit  
password or change the rating level in order to play the  
disc.  
Press OK to confirm your rating selection, then  
press SYSTEM MENU to exit the menu.  
4
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation with tape  
Slow motion playback, Shuttle :  
Playing a tape  
5
6
During playing back or still picture press 1 or 2.  
You can reach the following playback speeds. (-7xplay,  
-5xplay, -play, still, 1/19 slow, play, 2xplay, 7xplay)  
To switch off the slow motion and shuttle, press the  
desired function.  
During slow motion and shuttle, the noise bars may  
appear on the picture according to the status of tape.  
If distortions can be seen in the picture, reduce them  
with 3 or 4.  
You will only be able to load and eject video cassettes  
when yourVCR is plugged into the mains.  
YourVCR may also playback recordings from NTSC tapes  
(on PAL TV).  
Getting a better picture  
When a cassette is inserted and playback started, the  
automatic tracking function works to get the best possible  
picture automatically. If the quality of the recording is  
poor, repeatedly press 3 or 4 on the remote control to  
manually adjust the tracking until any distortions have  
been removed.  
Press STOP to end playback.  
Press  
.
If the end of the tape is reached, your DVD+VCR will  
stop playback automatically, rewind, stop, eject the tape.  
Press numbered 0 on the remote control to switch  
automatic tracking back on again.  
OPR (Optimum Picture Response)  
This feature automatically improves playback picture  
quality by adjusting your DVD+VCR to the condition of  
the tape.  
Make sure that you have correctly connected yourVCR  
as described earlier in this book.  
Turn on your TV.  
Press 1 to turn on your DVD+VCR.  
Insert the video cassette into your DVD+VCR.  
The video cassette should have the window side facing  
up and the arrow facing away from you.  
1
Press SYSTEM MENU.  
1
Press PLAY B to start playing your tape.  
If you load a video cassette which has had its record  
protection tab removed, playback of the cassette will  
start automatically.  
2
OFF  
SOFT  
Pr-12  
P
SHARP  
SET  
REC  
AUD  
ACMS  
R
+
-
NIC  
f
OSD  
ON  
OFF  
DECO-  
DER  
i
AUTOTRACKING  
Your DVD+VCR will automatically adjust the tracking to  
give the best picture quality.  
Press 1 or 2 to select  
.
2
3
4
Press PAUSE/STEP ;to still a picture.  
Press PAUSE/STEP ;repeatedly to advance the tape  
frame by frame.  
If you press T, the picture will be slowed down at  
about 1/19 times the normal playback.  
Tapes can be paused for up to 5 minutes.After 5  
minutes your DVD+VCR will stop the tape to prevent  
damaging the tape or your DVD+VCR .  
Still picture quality can be improved slightly by using 3  
or 4.  
3
Press OK.  
Press 3 or 4 repeatedly to select: OFF, SOFT or  
SHARP.  
Please note you may only set OPR when  
playing a tape.  
Press SYSTEM MENU return to screen.  
5
Press PLAY B to continue playing your tape.  
4
Picture search:  
During playing back press either S or T to this will  
enable you to rapidly wind the tape (7 times normal  
playback) see where you are on the tape.  
Logic search:  
During fast forwarding or rewinding press and hold S  
or T the picture will be played back at 7 times normal  
playback speed.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation with tape (Continued)  
Press SPEED if you wish to record in Long Play or  
Standard Play.  
SP will produce improved picture and sound quality,  
however LP will provide twice as much recording time  
as SP.  
InstantTimer Recording (ITR)  
5
6
YourVCR allows you to make recordings using a variety  
of simple methods:  
InstantTimer Recording (ITR) start recording  
immediately for a set period of time or until the video  
cassette runs out.  
Press RECORD on the remote to start recording.  
RECORD will appear on the TV screen.  
Press RECORD on your unit or press RECORD on  
the remote several times. Each successive press will  
increase the record time by 30 minutes until you reach  
a maximum of 9 hours.  
Your DVD+VCR incorporates Long Play (LP) which  
enables you to record up to twice the amount of time on  
a video cassette. For example an E-180 will record up to  
180 minutes using Standard Play (SP); using LP you will be  
able to record up to 360 minutes. Please note there will  
be a slight loss in picture and sound quality when using LP.  
Press PAUSE/STEP ;to avoid recording unwanted  
scenes.  
7
Press PAUSE/STEP ;to continue recording.  
If you press PAUSE/STEP ; during ITR, the DVD/VCR  
will enter the record pause mode and ITR is cancelled.  
Tapes can be paused for up to 5 minutes; RECP will be  
displayed when a tape is paused.After 5 minutes your  
DVD+VCR will stop recording to  
prevent damaging the tape or your DVD+VCR.  
Press STOP to end recording.  
STOP will appear on the TV screen for a few seconds.  
Make sure that you have correctly connected yourVCR  
as described earlier in this book.  
Press 1 to turn on yourVCR.  
1
2
Insert a video cassette with protection tab into your  
VCR.  
The video cassette should have the window side facing  
up and the arrow facing away from you.  
8
Press 3 or 4 to select the programme number you  
wish to record.  
You may also directly select programme number using  
the numbered buttons on the remote control.  
Notes  
3
4
G If you do not wish to record on a tape (this can  
happen quite easily by accident!) remove the  
protection tab on the back edge of the video cassette.  
G It is possible to record on a video cassette with the  
record protection tab removed by covering the hole with  
self adhesive tape.  
G Remember you can record one programme while  
watching another by starting your instant recording, press  
TV/VIDEO to appear TV indicator in the display  
window and then selecting a different channel on your TV.  
If you wish to record directly from the SCART or RCA  
sockets repeatedly press INPUT until the socket you  
wish to record from is displayed.  
AV 1 for recording from EURO AV1 SCART socket on  
the rear of your unit.  
AV 2 for recording from EURO AV2 SCART socket on  
the rear of your unit.  
AV 3 for recording fromVIDEO IN and AUDIO IN  
(Left & Right) sockets on the front of your unit.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation with tape  
Tim er recording using O n Screen  
Display  
You may set up to seven timer record events within one  
month of the current date.  
Note  
Before setting the timer make sure that you have set the  
DVD+VCR clock correctly and you know which PR  
numbers have been assigned to the TV stations you have  
tuned on your DVD+VCR.  
Tim er Recording function will only active if the  
DVD+VCR is in Standby m ode.  
Press 3 or 4 to switch VPS/PDC on or off.  
8
Press 2 to select the recording speed.  
Press 3 or 4 to select the desired tape speed  
(SP, IP, or LP).  
IP mode determines how much tape is left and switches  
speed from SP to LP, if necessary, to complete recording  
the program. IP mode cannot be selected when  
VPS/PDC is ON.  
Insert a video cassette with protection tab into your  
1
DVD+VCR.  
The video cassette should have the window side facing  
up and the arrow facing away from you.  
Ensure that the set is in VCR mode.  
2
3
4
Press SYSTEM MENU.  
Press 1 or 2 to select REC.  
Press O K.  
Press O K to start setting the timer record event.  
If all timer record events are full press 3 or 4 to select  
the event that you wish to remove and replace.  
Press 1 to delete the event.  
Press SYSTEM MENU to set another timer record  
event and follow steps 4 to 8.  
Check that the timer event details are correct.  
Press SYSTEM MENU twice.  
PR  
DATE  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
T I M E  
9
- -: - -~ - -: - -  
- -: - -~ - -: - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
SP  
SP  
SP  
SP  
SP  
SP  
SP  
If PLEASE CHECK is displayed, you have entered  
incorrect and will need to re-enter the data.  
Press 1 to switch your DVD+VCR Standby m ode.  
will appear in the display window while your  
DVD+VCR waits to make the recording.  
i
To watch a DVD during timer recording standby mode,  
press POWER and DVD to switch to DVD mode.  
Press 3 or 4 to enter the station that you wish to  
record.  
5
Once selected press 2.  
Press STO P to end recording.  
You may also press 3 or 4.  
10  
If you wish to record from AUDIO IN (L/R) and VIDEO  
IN on the front or from the EURO SCART sockets on  
the back of your unit, See Notes (AV1,AV2 or AV3).  
Notes  
You can obtain the PR number assigned to each station by  
pressing DISPLAY when you are watching the respective  
channel.  
If at a later date you wish to delete or change any of  
the settings in timer event memory you may do so  
without having to enter all the timer event information  
again. Simply display the timer event screen. Use 3 or 4  
to select the event that you wish to delete or change.  
Press 1 to delete the event...or  
Press O K to change; then press 1 or 2 to select; Station,  
Date, Start and End times and LP. Press 3 or 4 to enter  
the correct information.  
Press 3 or 4 to enter the date of the programme.  
If you press O K before entering the date you may select  
one of the following automated recording features. Use  
1 or 2 to select, then press O K to confirm.  
DLY To record every day (except Saturday and Sunday)  
at the same time.  
6
7
If Tim er record events O verlap...  
Make sure that the preset times of the timer recording  
events do not overlap. If they do, the earlier programme  
will always be given priority.  
SU ~ SA To record at the same time every week.  
Exam ple:  
Programme 1 is programmed to start at 16:00 and end at  
17:00.  
Programme 2 is programmed to start at 16:30 and end at  
17:30.  
(In this case, Programme 1 will be recorded in its entirety,  
but only the last 30 minutes of Programme 2 will be  
recorded.)  
Press 3 or 4 to enter the recording start and end  
times of the programme that you wish to record.  
Please note your DVD+VCR uses a 24 hour clock. e.g.  
1pm will be displayed as 13:00.  
You may also select the start and end times by using 3  
or 4.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation with DVD and Video CD  
Playing a DVD andVideo CD  
General Features  
DVD VCD2.0 VCD1.1  
Note  
Unless stated otherwise, all operations described use the  
remote control. Some features may also be available on  
the Setup menu.  
Playback Setup  
G Turn on the TV and select the video input source  
connected to the DVD player.  
G Audio system:Turn on the audio system and select the  
input source connected to the DVD player.  
1 /3  
DVD  
Moving to anotherTITLE  
Press OPEN/CLOSE to open the disc tray.  
When a disc has more than one title, you can move to  
another title as follows:  
G Press DISPLAY, then press the appropriate numbered  
button (0-9) to select a title number.  
1
2
Load your chosen disc in the tray, with the  
playback side down.  
When a double-sided DVD is inserted, make sure the  
side you want to play is facing down.  
Moving to another CHAPTER/TRACK  
1 /12  
1 /3  
Press OPEN/CLOSE to close the tray.  
Playback starts automatically. If playback does not start,  
press PLAY B.  
VCD1.1  
DVD  
3
When a title on a disc has more than one chapter or a  
disc has more than one track, you can move to another  
chapter/track as follows:  
G Press S or T briefly during playback to select the  
next chapter/track or to return to the beginning of the  
current chapter/track.  
In some cases, the disc menu might appear instead.  
If a menu screen is displayed  
The menu screen may be displayed first after loading a DVD  
orVideo CD which offer a menu.  
G Press S twice briefly to step back to the previous  
chapter/track.  
DVD  
Use the 1 2 3 4 buttons to select the title/chapter you  
want to view, then press OK to start playback.  
Press TITLE or DISC MENU to return to the menu  
screen.  
G To go directly to any chapter during DVD playback, press  
DISPLAY.Then, press 3/4 to select chapter/track icon.  
Then, enter the chapter/track number using the numbered  
buttons (0-9).  
Note  
VCD2.0  
For two-digit numbers, press the numbered buttons (0-9)  
in rapid succession.  
G Use the number buttons to select the track you want to  
view.  
Press RETURN to return to the menu screen.  
G Menu setting and the exact operating procedures for using  
the menu may differ depending on the disc. Follow the  
instructions on the each menu screen.  
DVD VCD2.0 VCD1.1  
Search  
1 Press S or T for about two seconds during  
playback.  
The player will now go into SEARCH mode.  
2 Press S or T repeatedly for about two seconds to  
select the required speed:  
You also may set PBC to Off under setup. See page 19.  
Notes  
– If Parental Control is set and the disc is not within the  
Rating settings (not authorized), the 4-digit code must be  
entered and/or the disc must be authorized (see “LOCK  
(Parental Control)”, on page 20).  
QX2, QX4, QX16, QX100 (backward) or  
RX2, RX4, RX16, RX100 (forward).  
With aVideo CD, the Search speed changes:  
QX2, QX4, QX8 (backward) or  
RX2, RX4, RX8 (forward).  
– DVDs may have a region code.  
Your player will not play discs that have a region code  
different from your player.The region code for this player  
is 2 (two).  
To watch a DVD during timer recording standby mode,  
press POWER and DVD to switch to DVD mode.  
3 To return to playback, press PLAY B.  
Still Picture and Frame-by-frame playback  
DVD VCD2.0 VCD1.1  
1 Press PAUSE/STEP during playback.  
The player will now go into PAUSE mode.  
2 You can advance the picture frame-by-frame by pressing  
PAUSE/STEP repeatedly on the remote control.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation with DVD and Video CD  
DVD VCD2.0 VCD1.1  
Repeat A-B  
General Features (continued)  
A
-
A - B  
Off  
DVD VCD2.0 VCD1.1  
Slow Motion  
1 Press T during still mode.  
To repeat a sequence in a title:  
The player will enter SLOW mode.  
1 Press REPEAT A-B at your chosen starting point.  
2 Press T repeatedly to select the required speed :  
T 1/7, T 1/6, T 1/4 or T 1/2 (forward).  
3 To exit slow motion mode, press PLAY B.  
A
appears briefly on the TV screen.  
*
2 Press REPEAT A-B again at your chosen end point.  
A B appears briefly on the TV screen, and the repeat sequence  
begins.  
Note  
G Slow motion playback in reverse is not applicable.  
3 To cancel the sequence, press REPEAT A-B.  
DVD VCD2.0 VCD1.1  
Repeat  
DVD VCD2.0  
VCD1.1  
Time Search  
(PBC:Off)  
Chapter  
Title  
All  
Off  
Track  
0:20:09  
-:--:--  
DVDVideo Discs - Repeat Chapter/Title/Off  
1 To repeat the currently playing chapter, press REPEAT.  
The Repeat Chapter icon appears on the TV screen.  
The Time Search function allows you to start playing at  
any chosen time on the disc.  
1 Press DISPLAY during playback.The on-screen display  
appears on the screen.  
The Time Search box shows the elapsed playing time of the  
2 To repeat the title currently playing, press REPEAT a  
second time.  
The Repeat Title icon appears on the TV screen.  
3 To exit Repeat mode, press REPEAT a third time.  
current disc.  
The Repeat Off icon appears on the TV screen.  
2 Within 10 seconds, press 3/4 to select the Time Search  
icon in the on-screen display.  
The “-:--:--” appears in the Time Search box.  
Video CDs, - RepeatTrack/All/Off  
1 To repeat the track currently playing, press REPEAT.  
The Repeat Track icon appears on the TV screen.  
3 Within 10 seconds, use the number buttons to enter the  
required start time. Enter hours, minutes, and seconds  
from left to right in the box.  
If you enter the wrong numbers, press CLEAR to remove the  
numbers you entered.Then enter the correct numbers.  
2 To repeat the disc currently playing, press REPEAT a  
second time.  
The Repeat All icon appears on the TV screen.  
3 To exit Repeat mode, press REPEAT a third time.  
The Repeat Off icon appears on the TV screen.  
4 Within 10 seconds, press OK to confirm the start time.  
Playback starts from the selected time on the disc. If you enter an  
invalid time, playback will continue from the current point.  
Note  
On aVideo CD with PBC, you must set PBC to Off on  
the setup menu to use the Repeat function. See page 19.  
Screen Saver  
A screen saver image appears when you leave the DVD  
Player in stop mode for about fifteen minutes.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation with DVD and Video CD  
DVD  
General Features (continued)  
Special DVD Features  
DVD VCD2.0 VCD1.1  
Zoom  
Checking the contents of DVDVideo discs: Menus  
DVDs may offer menus that allow you to access special  
features.To use the disc menu, press DISC MENU.  
Then, press the appropriate number button to select an  
option. Or, use the 1/2/3/4 buttons to highlight your  
selection, then press OK.  
The Zoom function allows you to enlarge the video image  
and to move through the enlarged image.  
1 Press ZOOM during playback or still playback to activate  
the Zoom function.  
The square frame appears briefly in the right bottom of the  
picture.  
2 Pressing ZOOM each time will change the TV screen in the  
sequence: 100% size150% size 200% size 300% size  
400% size 100% size  
3 Use the 1 2 3 4 buttons to move through the zoomed  
picture.  
4 To resume normal playback, press ZOOM repeatedly or  
CLEAR button.  
DVD  
Title Menu  
1 Press TITLE.  
If the current title has a menu, the menu will appear on the  
screen. Otherwise, the disc menu may appear.  
2 The menu can list camera angles, spoken language and  
subtitle options, and chapters for the title.  
3 To remove the title menu, press TITLE again.  
Note  
G The zoom function may not work for some DVDs.  
DVD  
Disc Menu  
1 Press DISC MENU.  
The disc menu is displayed.  
DVD VCD2.0 VCD1.1  
Marker Search  
You can start playback from a memorized point. Up to  
nine points can be memorized.  
2 To remove the disc menu, press DISC MENU again.  
To enter a mark, follow these steps.  
1 /1  
DVD  
Camera Angle  
1 During disc playback, press MARKER when playback  
reaches the spot that you want to memorize.  
The Marker icon will appear on the TV screen briefly.  
If the disc contains sequences recorded from different  
camera angles, the angle icon blinks on the TV screen.You  
can then change the camera angle if you wish.  
G Press ANGLE repeatedly during playback to select a  
desired angle.  
2 Repeat step 1 to enter up to nine Marker points on a disc.  
To Recall a Marked Scene  
1 During disc playback, press SEARCH.  
The MARKER SEARCH menu will appear on the screen.  
The number of the current angle appears on the display.  
1 ENG  
DVD  
D 3/2.1 CH  
2 Within 10 seconds, press 1/2 to select a Marker number  
that you want to recall.  
3 Press OK.  
Playback will start from the Marked scene.  
Changing the Audio Language  
Press AUDIO repeatedly during playback to hear a  
different audio language or audio track.  
4 To remove the MARKER SEARCH menu, press SEARCH.  
VCD2.0 VCD1.1  
Changing the Audio Channel  
Press AUDIO repeatedly during playback to hear a  
different audio channel (STEREO, LEFT or RIGHT).  
To clear a Marked Scene  
1 During disc playback, press SEARCH.  
The MARKER SEARCH menu will appear on the screen.  
ABC  
1 ENG  
DVD  
Subtitles  
2 Within 10 seconds, press 1/2 to select a Marker number  
that you want to erase.  
Press SUBTITLE repeatedly during playback to see the  
different subtitle languages.  
3 Press CLEAR.  
The Marker number will be erased from the list.  
4 Repeat steps 2 and 3 to erase additional Marker numbers.  
5 To remove the MARKER SEARCH menu, press SEARCH.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TM  
Operation with Audio and MP3/Windows Media Audio Disc  
TM  
Playing an Audio CD and  
Notes on MP3/Windows Media  
TM  
MP3/Windows Media Audio Disc Audio Recordings  
TM  
MP3/Windows Media Audio Disc compatibility  
with this player is limited as follows:  
CD  
MP3  
TM  
The DVD Player can play MP3/Windows Media Audio  
formatted recordings on CD-ROM, CD-R or CD-RW  
1 Sampling Frequency / within 8 - 48 kHz (MP3)  
TM  
within 32 - 48 kHz (Windows Media Audio  
)
TM  
discs. Before playing MP3/Windows Media Audio  
2 Bit rate / within 32 - 320 kbps (MP3)  
within 48 - 384 kbps (Windows Media Audio  
TM  
recordings, read the notes on MP3/Windows Media  
Audio Recordings on right.  
TM  
)
3 The player cannot read an MP3 file that has a file  
extension other than “.mp3” .  
Audio CD  
Once you insert an audio CD a menu appears on the TV  
4 CD-R physical format should be “ISO 9660”  
screen. Press 3/4 to select a track then press PLAY or  
OK and playback starts.  
TM  
5 If you record MP3/Windows Media Audio files using the  
software which cannot create a file system, for example  
“Direct-CD” etc., it is impossible to playback  
TM  
MP3/Windows Media Audio files.We recommend that  
you use “Easy-CD Creator”, which creates an ISO9660 file  
system.  
6 File names should be named using 8 letters or less and  
must incorporate “.mp3” or “.wma” extension.  
7 Do not use special letters such as “/ : * ? “ < > ” etc.  
8 The total number of contens on the disc should be less  
than 1500 files and 300 folders.  
TM  
MP3/Windows Media Audio  
1 Press 3/4 to select a folder, and press OK to see the  
folder contents.  
2 Press 3/4 to select a track then press PLAY or OK.  
Playback starts.  
TM  
9 Multi session CD containing Windows Media Audio may  
not be supported.  
This DVD player requires discs/recordings to meet  
certain technical standards in order to achieve optimal  
playback quality. Pre-recorded DVDs are automatically set  
to these standards.There are many different types of  
recordable disc formats (including CD-R containing MP3  
TM  
or Windows Media Audio files).That require certain pre-  
existing conditions (see above) to insure compatible  
playback.  
Customers should also note that permission is  
Tips  
required in order to download MP3/Windows  
TM  
– If you are in a file list on the “MUSIC” menu and want to  
return to the Folder list, use the 3/4 to highlight  
press OK.  
– On a CD with MP3/Windows Media Audio and JPEG you  
can switch MP3/Windows Media Audio and JPEG. Press  
Media Audio files and music from the Internet.  
and  
Our company has no right to grant such  
permission. Permission should always be sought  
from the copyright owner.  
TM  
TM  
TITLE and “MUSIC” or “PHOTO” word on top of the  
menu is highlighted.  
– When playing a file containing information such as track  
titles, you can see the information by pressing DISPLAY.  
Notes  
– File name displayed is shorter in length than 31 characters.  
– Title and artist information is less than 32 characters.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TM  
Operation withAudio and MP3/Windows Media Audio Disc (Continued)  
CD  
MP3  
CD  
Pause  
Repeat A-B  
1 Press PAUSE/STEP during playback.  
2 To return to playback, press PLAY B, OK or press  
PAUSE/STEP again.  
To repeat a sequence.  
1 During disc playback, press REPEAT A-B at your chosen  
starting point.  
The Repeat icon and “ ” appears on the menu screen.  
A-  
CD  
MP3  
2 Press REPEAT A-B again at your chosen end point.  
The Repeat icon and “A-B” appears on the menu screen, and the  
sequence begins to play repeatedly.  
Moving to anotherTrack  
G Press S or T briefly during playback to go to the  
next track or to return to the beginning of the current  
track.  
G Press S twice briefly to step back to the previous  
track.  
3 To exit the sequence and return to normal play, press  
REPEAT A-B again.  
G You can play any track by inputting its number.  
CD  
MP3  
RepeatTrack/All/Off  
1 To repeat the track currently playing, press REPEAT.  
The Repeat icon and “Track” appears on the menu screen.  
2 To repeat all tracks on a disc, press REPEAT a second  
time.  
The Repeat icon and “All” appears on the menu screen.  
3 To cancel Repeat mode, press REPEAT a third time.  
CD  
MP3  
Search  
1 Press S or T for about two seconds during  
playback.  
The player will now go into SEARCH mode.  
2 Press S or T repeatedly for about two seconds to  
select the required speed: QX2, QX4, QX8  
(backward) or RX2, RX4, RX8 (forward).  
Search speed and direction are indicated on the menu screen.  
3 To exit SEARCH mode, press PLAY B.  
CD  
MP3  
Shuffle  
1 Press SHUFFLE during playback or when playback is  
stopped.  
The unit automatically begins Random Playback and  
“Random” appears on the menu screen.  
2 To return to normal playback, press SHUFFLE.  
“Random” disappears on the menu screen.  
Note  
By pressing T during shuffle playback, the unit selects  
another track and resumes shuffle playback.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation with JPEG Disc  
Moving to another File  
Press S or T once during viewing a picture to  
advance to the next file or to the previous file.  
JPEG  
Viewing a JPEG disc  
This DVD+VCR can play discs with JPEG files. Before  
playing JPEG recordings, read the notes on JPEG  
Recordings on right.  
Still Picture  
1 Press PAUSE/STEP during slide show.  
The player will now go into PAUSE mode.  
2 To return to the slide show, press PLAY B or press  
PAUSE/STEP again.  
Insert a disc and close the tray.  
The PHOTO menu appears on the TV screen.  
1
JPEG  
Zoom  
Use zoom to enlarge the photo image. (see 26 page)  
To rotate picture  
Press 3/4 during showing a picture to rotate the  
picture clockwise or counter clockwise.  
Press 3/4 to select a folder then press OK.  
A list of files in the folder appears. If you are in a file list  
and want to return to the Folder list, use the 3/4  
2
3
Notes on JPEG Recordings  
buttons on the remote to highlight “  
and press OK  
G Depending upon the size and number of the JPEG files, it  
could take a long time for the DVD+VCR to read the  
disc’s contents. If you don’t see an on-screen display after  
several minutes, some of the files are too big — reduce  
the resolution of the JPEG files to less than 5760  
(Horizontal)x4608 (Vertical) pixels and burn another disc.  
If you want to view a particular file, press 3/4 to  
highlight a file and press OK or PLAY B.  
Viewing the file proceeding starts.  
While viewing a file, you can press STOP to move to the  
previous menu (PHOTO menu).  
G The total number of contens on the disc should be less  
than 1500 files and 300 folders.  
JPEG  
Slide Show  
G Some disc may be incompatible due to different recording  
format or condition of disc.  
Use 1 2 3 4 to highlight the  
OK.  
(Slide Show) then press  
G Ensure that all the selected files have the “.jpg” extensions  
when copying into the CD layout.  
Tips  
G There are three Slide Speed options  
(Normal) and > (Slow).  
: >>> (Fast), >>  
G If the files have “.jpe” or “.jpeg” extensions, please rename  
them as “.jpg” files.  
TM  
G On a disc with MP3/Windows Media Audio and JPEG  
you can switch MP3/Windows Media Audio and JPEG.  
Press TITLE and MUSIC or PHOTO word on top of the  
G File names without “.jpg” extension will not be able to be  
read by this DVD+VCR. Even though the files are shown  
as JPEG image files in windows explorer.  
TM  
menu is highlighted.  
G Press RETURN, information of file is hidden.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD  
MP3  
Programmed Playback  
Repeat ProgrammedTracks  
Programmed Playback with Audio  
G To repeat the track currently playing, press REPEAT.  
The Repeat icon and “Track” appears on the menu screen.  
G To repeat all tracks on the program list, press REPEAT a  
second time.  
TM  
CD and MP3/Windows Media  
Audio Disc  
The Repeat icon and “All” appears on the menu screen.  
G To cancel Repeat mode, press REPEAT a third time.  
The Program function enables you to store your favorite  
tracks from any disc in the player memory.  
Program can contain 30 tracks.  
Note  
If you press T once during Repeat Track playback, the  
repeat playback cancels.  
Press PROGRAM during playback or in the stop  
1
mode to enter the Program Edit mode.  
E
The  
mark will appear to the right of the word “Program”  
Erasing aTrack from Program List  
1 Press PROGRAM in the stop mode to enter the  
Program Edit mode.  
2 Press 2 to move to the Program list.  
3 Use 3/4 to select the track that you wish to erase from  
the Program list.  
on the right side of the menu screen.  
Note  
Press PROGRAM to exit the Program Edit mode; the  
E
mark will disappear.  
4 Press CLEAR.  
The track will be erased from the Program list.  
Select a track, then press OK to place the  
selected track on the Program list.  
2
3
Erasing the Complete Program List  
1 Follow steps 1-2 of “Erasing a Track from Program List” as  
above.  
2 Use 3/4 to select “Clear All”, then press OK.  
The complete Program for the disc will be erased.  
The programs are also cleared when the disc is removed.  
Repeat step 2 to place additional tracks on the  
Program list.  
Maintenance and Service  
Refer to the information in this chapter before contacting  
a service technician.  
TM  
Audio CD menu  
MP3/Windows Media  
Audio menu  
Handling the Unit  
Press 2.  
4
The programmed track you selected last is highlighted on the  
program list.  
When shipping the unit  
Please save the original shipping carton and packing  
materials. If you need to ship the unit, for maximum  
protection, re-pack the unit as it was originally packed at  
the factory.  
Use 3/4 to select the track you want to start  
5
6
playing.  
Press PLAY B to start.  
Playback begins in the order in which you programmed the  
tracks.  
Playback stops after all of the tracks on the Program list have  
played once.  
Keeping the exterior surfaces clean  
• Do not use volatile liquids such as insecticide spray near  
the unit.  
• Do not leave rubber or plastic products in contact with  
the unit for a long period of time since they leave marks  
on the surface.  
To resume normal playback from programmed  
playback, then select a track of AUDIO CD (or  
MUSIC) list and then press PLAY.  
7
Cleaning the unit  
To clean the player, use a soft, dry cloth. If the surfaces are  
extremely dirty, use a soft cloth lightly moistened with a  
mild detergent solution.  
Do not use strong solvents such as alcohol, benzine, or  
thinner, as these might damage the surface of the unit.  
Maintaining the Unit  
The DVD player is a high-tech, precision device. If the  
optical pick-up lens and disc drive parts are dirty or worn,  
the picture quality could be diminished.  
Depending on the operating environment, regular  
inspection and maintenance are recommended after every  
1,000 hours of use.  
For details, please contact your nearest authorized service  
center.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Operation  
On Screen Display  
Video Doctor (Self-Diagnosis)  
You may easily display the current time or tape counter,  
amount of tape left, day, month, year, day of week,  
programme channel, tape speed and operational mode of  
yourVCR on the TV screen. If a recording is taking place  
these On Screen Displays will not be recorded onto the  
tape.  
This feature informs you that there is a problem with your  
VCR.These error messages will appear on the TV screen.  
Press SYSTEM MENU.  
1
2
3
Press 1or 2to select  
.
Press OK.  
Press DISPLAY to display.  
1
2
Press DISPLAY repeatedly to cycle through the  
display options.The tape counter and amount of tape  
left will appear if there is a tape loaded.  
1
2
+
Pr-12  
P
SET  
SYS  
NIC  
SET  
REC  
AUD  
R
ACMS  
+
+
-
f
OSD  
ON  
OFF  
DECO-  
DER  
OK  
i
After 3 seconds the majority of the On Screen Displays  
will clear leaving only the clock or tape counter and the  
amount of tape left on the screen.  
Press DISPLAY again to remove all displays from the  
TV screen.  
ANTENNA CONNECT  
HEAD STATUS  
TAPE STATUS  
NO. OF TIMER PROGRAMME  
NEXT TIMER PROGRAMME  
PLEASE CHECK  
+
Tape Counter Memory Stop  
i
The DigitalTape Counter can be displayed on the  
display window instead of the time by pressing DISPLAY  
on the remote control.The Digital Tape Counter indicates  
the relative positions of recordings on the tape.  
Press 3or 4to check a problem.  
ANTENNA CONNECT  
O PLEASE CHECK:  
Connect the aerial into the jack securely.  
Press DISPLAY.  
Press CLEAR to set the counter to 0:00:00.  
Press PLAY B or start recording.  
The tape counter will display the actual play time in  
hours, minutes and seconds.  
HEAD STATUS  
O PLEASE CLEAN:  
Clean your video heads.  
1
2
TAPE STATUS  
O NOT RECORDABLE:  
Insert a tape with its protection tab in place  
Press STOP 9 when playback or recording is  
complete.  
Press S.  
The tape will rewind and automatically stop when the  
counter returns to 0:00:00.  
NO. OFTIMER PROGRAMME  
O 2  
Shows the number of timer recording.  
NEXTTIMER PROGRAMME  
O PR-01 26 10:00~11:00 SP  
Shows the current status of timer recording.  
Child Lock  
The control buttons on the front of the unit can be  
switched off so that your unit can only be operated using  
the remote control.  
Press SYSTEM MENU.  
Press CHILD LOCK.  
1
and SAFE will appear in the display window.  
None of the buttons on the front of your unit will  
work.  
If any buttons on the front of your unit are pressed  
SAFE will appear in the display window for a few  
seconds.  
Press CHILD LOCK again to switch off the child lock.  
2
OFF will appear in the display window.  
Note  
CHILD LOCK is not available on the DVD mode.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Operation (Continued)  
Press 3or 4repeatedly to select: AUTO, 4:3 or 16:9.  
AUTO (Playback mode only):  
Automatically plays back Wide-Screen  
programmes as Wide-Screen and Normal  
programmes as normal.  
Hi-Fi Stereo Sound System  
2
3
YourVCR will record and playback Hi-Fi stereo sound. In  
addition it has a stereo NICAM digital stereo sound  
decoder.This allows you to record and playback the sound  
in several different ways.Video cassettes recorded on your  
VCR will have a normal mono audio track and twoVHS  
Hi-Fi stereo audio tracks.These stereo tracks allow you to  
make audio recordings in Hi-Fi stereo or bilingual mode  
from a TV broadcast, stereo audio system, video disc or  
another Hi-FiVCR.  
4:3  
Only for playing back and recording Normal format  
recordings (4:3).  
16:9:  
Only for playing back and recording Wide-Screen format  
recordings (16:9).  
YourVCR’s NICAM digital sound decoder allows you to  
1
enjoy broadcasts with NICAM sound, as well as standard  
stereo, bilingual and mono sound.The particular type of  
sound received or that recorded will be briefly displayed  
on the TV screen for a couple of seconds:  
1
2
Pr-12  
P
SET  
AUTO  
4:3  
REC  
AUD  
ACMS  
R
NIC  
f
OSD  
ON  
OFF  
16:9  
i
DER  
STEREO NICAM  
Sound is automatically recorded on the Hi-Fi stereo and  
mono tracks of the video tape.  
BIL NICAM  
Both audio channels will be recorded on the Hi-Fi stereo  
tracks.The primary language channel (left) will be  
recorded on the mono track of the video tape.  
MONO  
The sound is recorded on the Hi-Fi tracks and the mono  
track of the video tape without any separation.  
Press SYSTEM MENU. Press F or G to select AUD.  
Press SYSTEM MENU to remove the menus from the  
TV screen.  
To enjoy Wide-Screen playback you must connect your  
VCR to the TV using a SCART cable.  
To set the decoder  
We have already described, how to connect a decoder for  
pay-TV station as CANAL+ or PREMIERE on page 10. For  
the recording of an encoded station you do not have to  
control anything.You just select the station and wait  
shortly until the decoding will start.  
2
3
Press D or E to select STEREO, LEFT, RIGHT and  
MONO.  
Press SYSTEM MENU.  
In BIL NICAM playback the primary language is output  
on the left channel and the secondary channel is output  
simultaneously from the right channel when audio  
output is set to STEREO.The primary language will be  
output from both channels when the audio setting is  
MONO.  
1
2
The main menu will appear on the TV screen.  
Press 1or 2 to select the DECODER.  
Press OK.  
Press 3or 4 to select.  
ON: When the decoder is connected to the AV2 socket.  
OFF:When anotherVCR is connected to the AV2  
socket.  
Please note that when adjusting the tracking control Hi-  
Fi stereo sound may revert to MONO.  
ChangingTV Audio Channel  
Press SYSTEM MENU to return to a TV picture.  
Som TV programs are broadcast with a bilingual audio  
program (BIL). Press 3or 4 to select STEREO/MAIN,  
STEREO/SUB and MONO/MAIN.  
CD  
DVD  
Last Condition Memory  
VCD1.1  
This player memorizes the last condition for the last disc  
you have watched. Settings remain in memory even if you  
remove the disc from the player or switch off the player. If  
you load a disc that has its settings memorized, the latest  
stop position is automatically recalled.  
Wide Screen Compatibility 16:9  
YourVCR can record and play back wide screen aspect  
ratio programmes (16:9).To record a wide screen format  
programme successfully the correct type of wide screen  
signal must be broadcast by the TV station.  
Notes  
– Settings are stored in memory for use any time.  
– This player does not memorize settings of a disc if you  
switch off the player before commencing to play it.  
Switch on yourVCR.  
1
Press SYSTEM MENU.  
Press 1or 2to select  
Press OK.  
.
1
2
1
2
Pr-12  
Pr-12  
SYS-  
TEM  
P
SET  
P
SET  
-
SYS  
NIC  
SET  
SET  
REC  
AUD  
ACMS  
REC  
AUD  
ACMS  
R
R
+
f
f
4:3  
OSD  
OSD  
ON  
16:9  
ON  
DECO-  
DER  
i
OK  
i
OFF  
OFF  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Special Recording  
Copying from DVDToVCR  
Recording from another video  
recorder  
With this video recorder you can make recordings from  
an external source, such as copying from another video  
recorder or a camcorder.  
This unit allows you to copy the contents of a DVD to a  
VHS tape with a press of the D.DUBBING button.  
Notes  
G Be sure to set ‘Progressive Scan’ to “Off” on the setup  
menu.  
G If the DVD you are attempting to copy is copy  
protected, you may not be able to copy the disc.  
Note  
In the following description, this video recorder will be  
one used for recording and will be referred to asVCR B.  
The other appliance will be used for playback and will be  
referred to asVCR A.  
Insert Disc  
1
Insert the disc you wish to copy in the DVD deck and  
close the disc tray.  
VCR A should be connected to the SCART socket on  
the rear panel of your unit or the AV sockets on the  
front panel of your unit.  
InsertVHSTape  
Insert a blankVHS videotape into theVCR deck.  
1
2
3
Copy the DVD toVHSTape  
Press the D.DUBBING button or RECORD on the  
unit front panel.  
G The DVD will go into Play mode and theVCR will go  
into Record mode.  
Insert the recorded tape intoVCR A and a blank tape  
intoVCR B.  
2
3
Press INPUT until the socket you wish to record from  
is displayed. (VCR B).  
G If the DVD disc menu appears, you may need to press  
the Play button manually to begin copying.  
AV 1 for recording from EURO AV1 SCART socket on  
the rear of your unit.  
Note  
If you press RECORD button, make sure the player is in  
DVD mode.  
AV 2 for recording from EURO AV2 SCART socket on  
the rear of your unit.  
AV 3 for recording fromVIDEO IN and AUDIO IN  
(Left & Right) sockets on the front of your unit.  
Stop the Copy Process.  
4
When the DVD is finished playing, press the STOP  
button to end the copy.  
G You must stop the Copy process manually when the  
DVD movie ends, or the unit may replay and record  
over and over again.  
To start recording, press the RECORD onVCR B and  
PLAY B onVCR A.  
4
5
When you want to finish copying, press the STOP 9 on  
both video recorders.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Check the following guide for the possible cause of a problem before contacting service.  
Cause  
Correction  
G Refer to page 6.  
Symptom  
DVD orVCR do not  
work properly.  
G DVD orVCR button is not switched  
properly.  
No power.  
G The power cord is disconnected.  
G Plug the power cord into the wall outlet  
securely.  
G Insert a disc.  
The power is on, but the  
DVD player does not  
work.  
G No disc is inserted.  
G Select the appropriate video input mode on  
the TV so the picture from the DVD player  
appears on the TV screen.  
No picture.  
G The TV is not set to receive DVD signal  
output.  
G Connect the video cable into the jacks  
securely.  
G The video cable is not connected securely.  
G The equipment connected with the audio  
cable is not set to receive DVD signal  
output.  
G Select the correct input mode of the audio  
receiver so you can listen to the sound from  
the DVD player.  
No sound.  
G The audio cables are not connected  
securely.  
G Connect the audio cable into the jacks  
securely.  
G The power of the equipment connected  
with the audio cable is turned off.  
G Turn on the equipment connected with the  
audio cable.  
G Set the Digital Audio Output to the  
correct position, then turn on the DVD  
player again by pressing POWER.  
G The Digital Audio Output is set to the  
wrong position.  
G The disc is dirty.  
G The TV channels are not tuned in properly.  
G Clean the disc.  
G Check tuning, carry out tuning again.  
The picture is poor.  
G Insert a playable disc. (Check the disc type  
and Regional code.)  
G Place the disc with the playback side down.  
G An unplayable disc is inserted.  
The DVD player does not  
start playback.  
G The disc is placed upside down.  
G Place the disc on the disc tray correctly inside  
the guide.  
G The disc is not placed within the guide.  
G Clean the disc.  
G The disc is dirty.  
G Cancel the Rating function or change the  
rating level.  
G The Rating level is set.  
G There is an obstacle in the path of the  
remote control and this unit.  
The remote control does  
not work properly.  
G Remove the obstacle.  
G The batteries in the remote control are  
exhausted.  
G Replace the batteries with new ones.  
Video tape cannot be  
inserted.  
G Is the cassette compartment empty?  
G Audio mode is not set properly.  
G NICAM mode is not set properly.  
G Eject the tape in.  
G Switch ‘AUDIO’ in the main menu to  
‘STEREO’.  
No Hi-Fi sound  
G Make sure NICAM in the menu is set to  
AUTO for the station to be recorded.  
No NICAM sound  
recording  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Language Code List  
Enter the appropriate code number for the initial settings “LANGUAGE” (See page 18).  
Code Language  
Code Language  
Code Language  
Code Language  
6566  
6565  
6570  
8381  
6577  
6582  
7289  
6583  
6588  
6590  
6665  
6985  
6678  
6890  
6672  
6682  
6671  
7789  
6669  
7577  
6765  
9072  
6779  
7282  
6783  
6865  
7876  
6978  
6979  
6984  
7079  
Abkhazian  
Afar  
7074  
7073  
7082  
7089  
7176  
7565  
6869  
6976  
7576  
7178  
7185  
7265  
7387  
7273  
7285  
7383  
7378  
7365  
7165  
7384  
7465  
7487  
7578  
7583  
7575  
7589  
7579  
7585  
7679  
7665  
7686  
Fiji  
7678  
7684  
7775  
7771  
7783  
7776  
7784  
7773  
7782  
7779  
7778  
7865  
7869  
7879  
7982  
8065  
8083  
7065  
8076  
8084  
8185  
8277  
8279  
8285  
8377  
8365  
7168  
8382  
8372  
8378  
8368  
Lingala  
8373  
8375  
8376  
8379  
6983  
8385  
8387  
8386  
8476  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
8479  
8482  
8475  
8487  
8575  
8582  
8590  
8673  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
Singhalese  
Slovak  
Slovenian  
Somali  
Spanish  
Sudanese  
Swahili  
Swedish  
Tagalog  
Tajik  
Finnish  
Lithuanian  
Macedonian  
Malagasy  
Malay  
Afrikaans  
Albanian  
Ameharic  
Arabic  
French  
Frisian  
Galician  
Georgian  
German  
Greek  
Malayalam  
Maltese  
Armenian  
Assamese  
Aymara  
Maori  
Greenlandic  
Guarani  
Gujarati  
Hausa  
Marathi  
Azerbaijani  
Bashkir  
Moldavian  
Mongolian  
Nauru  
Tamil  
Basque  
Tatar  
Bengali; Bangla  
Bhutani  
Hebrew  
Hindi  
Nepali  
Telugu  
Thai  
Norwegian  
Oriya  
Bihari  
Hungarian  
Icelandic  
Indonesian  
Interlingua  
Irish  
Tibetan  
Tigrinya  
Tonga  
Breton  
Panjabi  
Bulgarian  
Burmese  
Byelorussian  
Cambodian  
Catalan  
Pashto, Pushto  
Persian  
Turkish  
Turkmen  
Twi  
Polish  
Italian  
Portuguese  
Quechua  
Rhaeto-Romance  
Rumanian  
Russian  
Japanese  
Javanese  
Kannada  
Kashmiri  
Kazakh  
Kirghiz  
Ukrainian  
Urdu  
Chinese  
Corsican  
Croatian  
Czech  
Uzbek  
Vietnamese  
Volapük  
Welsh  
Samoan  
Danish  
Sanskrit  
Dutch  
Korean  
Kurdish  
Laothian  
Latin  
Scots Gaelic  
Serbian  
Wolof  
English  
Xhosa  
Yiddish  
Yoruba  
Zulu  
Esperanto  
Estonian  
Faroese  
Serbo-Croatian  
Shona  
Latvian, Lettish  
Sindhi  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Country/Area Code List  
Enter the appropriate code number for the initial setting “Area Code” (See page 20).  
Code Country/Area  
Code Country/Area  
Code Country/Area  
Code Country/Area  
AD  
AE  
AF  
AG  
AI  
Andorra  
ER  
ES  
ET  
FI  
Eritrea  
Spain  
Ethiopia  
Finland  
LC  
LI  
LK  
LR  
LS  
LT  
LU  
LV  
Saint Lucia  
Liechtenstein  
Sri Lanka  
Liberia  
Lesotho  
Lithuania  
Luxembourg  
Latvia  
Libya  
Morocco  
SC  
SD  
SE  
SG  
SH  
SI  
Seychelles  
Sudan  
Sweden  
Singapore  
Saint Helena  
Slovenia  
Svalbard and Jan Mayen  
Islands  
Slovak Republic  
Sierra Leone  
San Marino  
Senegal  
Somalia  
Suriname  
Saint Tome and Principe  
Former USSR  
El Salvador  
Syria  
Swaziland  
Turks and Caicos Islands  
Chad  
French Southern Territories  
Togo  
Thailand  
Tadjikistan  
Tokelau  
Turkmenistan  
Tunisia  
Tonga  
East Timor  
Turkey  
Trinidad and Tobago  
Tuvalu  
Taiwan  
Tanzania  
United Arab Emirates  
Afghanistan  
Antigua and Barbuda  
Anguilla  
Albania  
Armenia  
Netherlands Antilles  
Angola  
Antarctica  
Argentina  
American Samoa  
Austria  
Australia  
FJ  
Fiji  
AL  
FK  
FM  
FO  
FR  
FX  
Falkland Islands  
Micronesia  
Faroe Islands  
France  
France (European  
Territory)  
Gabon  
Great Britain  
Grenada  
Georgia  
French Guyana  
Ghana  
Gibraltar  
Greenland  
Gambia  
AM  
AN  
AO  
AQ  
AR  
AS  
AT  
AU  
AW  
AZ  
BA  
BB  
BD  
BE  
BF  
BG  
BH  
BI  
SJ  
LY  
SK  
SL  
SM  
SN  
SO  
SR  
ST  
SU  
SV  
SY  
SZ  
TC  
TD  
TF  
TG  
TH  
TJ  
TK  
TM  
TN  
TO  
TP  
TR  
TT  
TV  
TW  
TZ  
UA  
UG  
UK  
UM  
US  
UY  
UZ  
VA  
VC  
VE  
MA  
MC  
MD  
MG  
MH  
MK  
ML  
MM  
MN  
MO  
MP  
MQ  
MR  
MS  
MT  
MU  
MV  
Monaco  
Moldavia  
GA  
GB  
GD  
GE  
GF  
Madagascar  
Marshall Islands  
Macedonia  
Mali  
Myanmar  
Mongolia  
Aruba  
Azerbaidjan  
Bosnia-Herzegovina  
Barbados  
Bangladesh  
Belgium  
Burkina Faso  
Bulgaria  
Bahrain  
Burundi  
Benin  
Bermuda  
Brunei Darussalam  
Bolivia  
Brazil  
Bahamas  
Bhutan  
Bouvet Island  
Botswana  
Belarus  
Belize  
Canada  
Cocos (Keeling) Islands  
Central African Republic  
Congo  
Switzerland  
Ivory Coast  
Cook Islands  
Chile  
Cameroon  
China  
Colombia  
Costa Rica  
Former Czechoslovakia  
Cuba  
CapeVerde  
Christmas Island  
Cyprus  
Czech Republic  
Germany  
Djibouti  
Denmark  
Dominica  
Dominican Republic  
Algeria  
Ecuador  
Estonia  
Egypt  
Western Sahara  
GH  
GI  
GL  
GM  
GN  
GP  
GQ  
GR  
GS  
Macau  
Northern Mariana Islands  
Martinique (French)  
Mauritania  
Montserrat  
Malta  
Guinea  
Guadeloupe (French)  
Equatorial Guinea  
Greece  
S. Georgia & S. Sandwich Isls.  
Guatemala  
Guam (USA)  
BJ  
Mauritius  
Maldives  
BM  
BN  
BO  
BR  
BS  
BT  
BV  
BW  
BY  
BZ  
CA  
CC  
CF  
CG  
CH  
CI  
CK  
CL  
CM  
CN  
CO  
CR  
CS  
CU  
CV  
CX  
CY  
CZ  
DE  
DJ  
DK  
DM  
DO  
DZ  
EC  
EE  
GT  
GU  
MW Malawi  
GW Guinea Bissau  
MX  
MY  
MZ  
NA  
NC  
NE  
NF  
NG  
NI  
NL  
NO  
NP  
NR  
NU  
NZ  
OM  
PA  
Mexico  
Malaysia  
Mozambique  
Namibia  
New Caledonia (French)  
Niger  
Norfolk Island  
Nigeria  
Nicaragua  
Netherlands  
Norway  
Nepal  
Nauru  
Niue  
New Zealand  
Oman  
Panama  
Peru  
Polynesia (French)  
Papua New Guinea  
Philippines  
Pakistan  
GY  
HK  
HM  
HN  
HR  
HT  
HU  
ID  
IE  
IL  
IN  
IO  
Guyana  
Hong Kong  
Heard and McDonald Islands  
Honduras  
Croatia  
Haiti  
Hungary  
Indonesia  
Ireland  
Israel  
Ukraine  
Uganda  
United Kingdom  
USA Minor Outlying Islands  
United States  
Uruguay  
Uzbekistan  
Vatican City State  
SaintVincent & Grenadines  
Venezuela  
Virgin Islands (British)  
Virgin Islands (USA)  
Vietnam  
Vanuatu  
Wallis and Futuna Islands  
Samoa  
India  
British Indian Ocean  
Territory  
Iraq  
Iran  
Iceland  
Italy  
Jamaica  
Jordan  
Japan  
IQ  
IR  
IS  
IT  
JM  
PE  
PF  
PG  
PH  
PK  
VG  
VI  
JO  
JP  
KE  
KG  
KH  
KI  
KM  
KN  
KP  
KR  
KW  
KY  
KZ  
LA  
LB  
VN  
VU  
WF  
WS  
YE  
YT  
YU  
ZA  
ZM  
ZR  
ZW  
Kenya  
Kyrgyzstan  
Cambodia6  
Kiribati  
Comoros  
Saint Kitts & Nevis Anguilla  
North Korea  
South Korea  
Kuwait  
PL  
Poland  
PM  
PN  
PR  
PT  
PW  
PY  
QA  
RE  
RO  
RU  
RW  
SA  
Saint Pierre and Miquelon  
Pitcairn Island  
Puerto Rico  
Portugal  
Palau  
Paraguay  
Qatar  
Reunion (French)  
Romania  
Russian Federation  
Rwanda  
Saudi Arabia  
Solomon Islands  
Yemen  
Mayotte  
Yugoslavia  
South Africa  
Zambia  
Zaire  
Zimbabwe  
Cayman Islands  
Kazakhstan  
Laos  
Lebanon  
EG  
EH  
SB  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specification  
General  
Power requirements  
Power consumption  
Dimensions (approx.)  
Mass (approx.)  
AC 220-230V, 50Hz  
17W  
430 X 78.5 X 265 mm (w/h/d)  
4.06 kg  
Operating temperature  
Operating humidity  
Timer  
5˚C to 35˚C (41˚F to 95˚F)  
5 % to 90 %  
24 hours display type  
System  
Laser  
Video Head system  
Signal system  
Semiconductor laser, wavelength 650 nm  
Double azimuth 6 heads, helical scanning.  
PAL  
Frequency response  
DVD (PCM 96 kHz): 8 Hz to 44 kHz  
DVD (PCM 48 kHz): 8 Hz to 22 kHz  
CD: 8 Hz to 20 kHz  
Signal-to-noise ratio  
Harmonic distortion  
Dynamic range  
More than 100dB (ANALOG OUT connectors only)  
Less than 0.008%  
More than 100 dB (DVD)  
More than 95 dB (CD)  
Inputs (VCR)  
Audio  
-6.0dBm, more than 10 kohms (SCART)  
-6.0dBm, more than 47 kohms (RCA)  
1.0Vp-p, 75 ohms, unbalanced (SCART/RCA)  
Video  
Outputs (DVD)  
VIDEO OUT  
1Vp-p 75 ohms, sync. negative  
S-VIDEO OUT  
(Y) 1Vp-p 75 ohms, negative sync., Mini Din 4-pin x 1  
(C) 0.3Vp-p 75 ohms  
COMPONENTVIDEO OUT  
(Progressive Scan)  
RGB output  
(Y) 1Vp-p 75 ohms, negative sync., RCA jack x 1  
(Pb)/(Pr) 0.7Vp-p 75 ohms, RCA jack x 2  
0.7Vp-p 75 ohms  
Audio output (digital audio)  
Audio output (analog audio)  
0.5V (p-p), 75 ohms, RCA jack x 1  
2.0Vrms (1 kHz, 0 dB), 600 ohms, RCA jack (L, R) x 2/SCART (TO TV)  
Outputs (VCR)  
Audio  
Video  
RGB output  
-6.0dBm, less than 1 kohms (SCART)  
1.0Vp-p, 75 ohms, unbalanced (SCART)  
0.7Vp-p 75 ohms  
Design and specifications are subject to change without notice.  
Manufactured under license from Dolby Laboratories.Dolby” and the double-D symbol are trademarks of  
Dolby Laboratories.  
P/NO: 3834RV0048C  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Peavey Guitar Reactor User Manual
Peavey Stereo Equalizer Q 215FX User Manual
Philips Hair Clippers QC5099 User Manual
Philips MP3 Player 10FF2CMI User Manual
Philips TV VCR Combo 14PV405 User Manual
Planet Technology Network Card WPG 100 User Manual
Porter Cable Saw 324MAG User Manual
Primera Technology Printer RX900 User Manual
PYLE Audio GPS Receiver PBT70R User Manual
PYLE Audio MP3 Docking Station PIWPD3 User Manual