DVD-Video Player /Video Cassette Recorder
DVD755VR/00
Read this manual first!
Congratulations on purchasing this Philips product.
We’ve included everything you need to get started.
If you have any problems, Philips representatives can
help you get the most from your new product by explaining:
• Hookups,
• First time setup, and
• Operation.
For fast help, call us first!
Tel: see back page of this manual
Owner’s Manual
Manuel de l’utilisateur
Bedienungsanleitung
Gebruiksaanwijzingen
Manual del usuario
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
English ...................................................... 4
Français ....................................................39
Deutsch ....................................................75
Nederlands ............................................111
Español ..................................................147
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
G Title Menu ............................................................................27
G Disc Menu............................................................................27
G Camera Angle......................................................................27
G Changing the Audio Language ........................................27
G Changing the Audio Channel ..........................................27
G Subtitles................................................................................27
Operation with Audio and MP3 Disc ......................28-29
Playing an Audio CD and MP3 Disc ..................................28-29
G Notes on MP3 Recordings ..............................................28
G Pause ....................................................................................29
G Moving to another Track ..................................................29
G Repeat Track/All/Off ..........................................................29
G Search....................................................................................29
G Shuffle....................................................................................29
G Repeat A-B ..........................................................................29
G 3D Surround........................................................................29
G Changing the Audio Channel ..........................................29
Operation with JPEG Disc..............................................30
Viewing a JPEG disc ....................................................................30
G Moving to another File......................................................30
G Still Picture ..........................................................................30
G To flip the picture ..............................................................30
G To rotate Picture ................................................................30
G Notes on JPEG Recordings..............................................30
Programmed Playback....................................................31
Programmed Playback with Audio CD and MP3 Disc ........31
Programmed Playback withVideo CD ....................................31
G Repeat Programmed Tracks ............................................31
G Erasing a Track from Program list ..................................31
G Erasing the Complete Program list................................31
Additional Operation ................................................32-33
On Screen Display........................................................................32
Tape Counter Memory Stop ....................................................32
Child Lock......................................................................................32
Video Doctor (Self-Diagnosis) ..................................................32
Hi-Fi Stereo Sound System........................................................33
Wide Screen Compatibility 16:9 ..............................................33
To set the decoder ......................................................................33
Last Condition Memory..............................................................33
Special Recording............................................................34
Copying from DVD toVCR ......................................................34
Recording from another video recorder................................34
Introduction
Safety Precautions ............................................................2
Index ..................................................................................3
Before Use ......................................................................5-6
Playable Discs ..................................................................................5
Remote Control Operation Range ............................................5
Precautions ......................................................................................6
Notes on Discs ..............................................................................6
About Symbols ................................................................................6
Selecting theViewing Source........................................................6
Front Panel and Display Window ....................................7
Remote Control ................................................................8
Rear Panel ..........................................................................9
Preparation
Connections................................................................10-11
Connecting to a TV & Decoder................................................10
Connecting to Optional Equipment ........................................11
Before Operation -VCR part....................................12-16
Tuning in a video channel on your TV ....................................12
Using your DVD+VCR for the very first time......................12
Setting the clock Manually..........................................................13
To set the colour system............................................................13
How to using the main menu....................................................14
Tuning in TV stations Automatically ........................................14
Tuning in TV stations Manually..................................................15
Changing the other of TV stations ..........................................16
Deleting TV stations ....................................................................16
Before Operation - DVD part ..................................17-20
General Explanation ....................................................................17
On-Screen Display........................................................................17
Initial Settings ..........................................................................18-20
G General Operation ............................................................18
G Language ..............................................................................18
G Picture ..................................................................................18
G Sound ....................................................................................19
G Others ..................................................................................19
G Parental Control ................................................................20
Operation
Operation withTape ..................................................21-24
Playing a tape ................................................................................21
G OPR (Optimum Picture Response) ..............................21
Instant Timer Recording (ITR) ..................................................22
ShowView Programming ............................................................23
Timer recording using On Screen Display ............................24
Operation with DVD andVideo CD ........................25-27
Playing a DVD andVideo CD....................................................25
General Features ..........................................................................25
G Moving to another TITLE ................................................25
G Moving to another CHAPTER/TRACK........................25
G Search....................................................................................25
G Still Picture and Frame-by-Frame Playback..................25
G Slow Motion........................................................................26
G Shuffle....................................................................................26
G Repeat ..................................................................................26
G Repeat A-B ..........................................................................26
G Time Search ........................................................................26
G 3D Surround........................................................................26
G Screen Saver........................................................................26
G Zoom ....................................................................................27
G Marker Search ....................................................................27
Special DVD Features..................................................................27
Reference
Troubleshooting ..............................................................35
Language Code List ........................................................36
Country/Area Code list ..................................................37
Specification ....................................................................38
About the symbols for instructions
Indicates hazards likely to cause harm to the unit itself
or other material damage.
Indicates special operating features of this unit.
Indicates tips and hints for making the task easier.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use
Disc-related terms
Title (DVD only)
The main film content or accompanying feature content
or additional feature content, or music album. Each title is
assigned a title reference number enabling you to locate it
easily.
Playable Discs
DVD
(8 cm / 12 cm disc)
Video CD (VCD)
(8 cm / 12 cm disc)
Chapter (DVD only)
Audio CD
(8 cm / 12 cm disc)
Sections of a picture or a musical piece that are smaller
than titles.
A title is composed of one or several chapters. Each
chapter is assigned a chapter number, enable you to locate
the chapter you want. Depending on the disc, no chapters
may be recorded.
In addition, this unit can play a DVD-R, DVD RW,
Kodak PICTURE CD, SVCD, and CD-R or CD-RW
that contains audio titles, MP3 or JPEG files.
Track (Video CD and audio CD only)
Notes
Sections of a picture or a musical piece on a video CD or
an audio CD. Each track is assigned a track number,
enabling you to locate the track you want.
– Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD-R/ RW) disc itself,
some CD-R/RW (or DVD-R/ RW) discs cannot be played
on the unit.
Scene
– Do not attach any seal or label to either side (the labeled
side or the recorded side) of a disc.
– Do not use irregular shaped CDs (e.g., heart-shaped or
octagonal). It may result in malfunctions.
On a video CD with PBC (Playback control) functions,
moving pictures and still pictures are divided into
sections called “Scenes”. Each scene is displayed in the
menu screen and assigned a scene number, enabling you to
locate the scene you want.
A scene is composed of one or several tracks.
Notes on DVDs andVideo CDs
Some playback operations of DVDs andVideo CDs may
be intentionally fixed by software manufacturers.As this
unit plays DVDs andVideo CDs according to disc content
designed by the software manufacturer, some playback
features of the unit may not be available, or other
functions may be added.
Refer also to the instructions applied with the DVDs and
Video CDs. Some DVDs made for business purposes may
not be played on the unit.
Types of video CDs
There are two types of video CDs:
Video CDs equipped with PBC (Version 2.0)
PBC (Playback control) functions allow you to interact
with the system via menus, search functions, or other
typical computer-like operations. Moreover, still pictures of
high resolution can be played if they are included in the
disc.
Video CDs not equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs allow
playback of video pictures as well as sound, but they are
not equipped with PBC.
Regional code of the DVD player and DVDs
This DVD player is designed and manufactured for
playback of region “2” encoded DVD software.
The region code on the labels of some DVD discs
indicates which type of player can play those
2
Remote Control Operation Range
Point the remote control at the remote sensor and press
the buttons.
G Distance:About 23 ft (7 m) from the front of the remote
sensor
discs.This unit can play only DVD discs labeled “2” or
“ALL”. If you try to play any other discs, the message
“Check Regional Code” will appear on the TV screen.
Some DVD discs may not have a region code label even
though their playback is prohibited by area limits.
G Angle: About 30° in each direction of the front of the
remote sensor
Remote control battery installation
Detach the battery cover on the rear of the
remote control, and insert two (size AA)
batteries with
and
aligned correctly.
Caution
Do not mix old and new batteries. Never mix different
types of batteries (standard, alkaline, etc.).
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use (Cont’d)
Cleaning discs
Precautions
Fingerprints and dust on the disc can cause poor picture
quality and sound distortion. Before playing, clean the disc
with a clean cloth.Wipe the disc from the center out.
Handling the unit
When shipping the unit
The original shipping carton and packing materials come in
handy. For maximum protection, re-pack the unit as it was
originally packed at the factory.
When setting the unit
The picture and sound of a nearby TV or radio may be
distorted during playback. In this case, position the unit
away from the TV or radio, or turn off the unit after
removing the disc.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static spray
intended for older vinyl records.
To keep the surface clean
Do not use volatile liquids, such as insecticide spray, near
the unit. Do not leave rubber of plastic products in
contact with the unit for a long period of time.They will
leave marks on the surface.
About Symbols
About the
symbol display
Cleaning the unit
“
” may appear on the TV screen during operation.
To clean the cabinet
This icon means the function explained in this owner’s
manual is not permitted by the DVD+VCR or is not
available on that specific DVD video disc.
Use a soft, dry cloth. If the surfaces are extremely dirty,
use a soft cloth lightly moistened with a mild detergent
solution. Do not use strong solvents, such as alcohol,
benzine, or thinner, as these might damage the surface of
the unit.
About the disc symbols for instructions
A section whose title has one of the following symbol is
applicable only to the disc represented by the symbol.
To obtain a clear picture
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or worn
down, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
DVD
DVD
VCD2.0
Video CDs with the PBC (playback control)
function.
VCD1.1
Video CDs without the PBC (playback control)
For details, please contact your nearest dealer.
function.
CD
Audio CDs.
Notes on Discs
MP3
MP3 disc.
Handling discs
JPEG
JPEG disc.
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints will not get
on the surface.
Selecting theViewing Source
You must select one of your output sources (DVD or
VCR) to view on the TV screen.
Do not stick paper or tape on the disc.
G If you want to view DVD deck output source:
Press DVD on the remote or SOURCE on the front panel
and output source of DVD deck is viewed on theTV screen.
G If you want to viewVCR deck output source:
PressVCR on the remote or SOURCE on the front panel
and output source ofVCR deck is viewed on the TV
screen.
Storing discs
After playing, store the disc in its case.
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sunlight,
as there may be a considerable temperature increase
inside the car.
Notes
G If you insert a disc while the DVD+VCR is in theVCR
mode, the DVD+VCR will switch to DVD mode
automatically.
G If you insert a cassette tape without prevention tab while
the DVD+VCR is in the DVD mode, the DVD+VCR will
switch toVCR mode automatically.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel and Display Window
Display window
Shows the current status of the unit.
SOURCE
DVD/VCR Selector
Remote Sensor
Point the remote control here.
PAUSE( \ \ )
Pause palyback
DiscTray
Insert a disc here.
temporarily/ frame-
by-frame playback.
Tape Compartment
Audio IN
(L/R) Jacks
STOP ( x ) Stops playback.
Forward Skip/Scan/Fast-Forward
Go to NEXT chapter/track.Press and hold for
two seconds for a fast forward search.
Winds the tape forwards.
Video IN Jack
EJECT (
)
Tape Eject.
DVD toVCR copy
VCR Record
PLAY ( N ) Starts playback.
Reverse Skip/Scan, Rewind
Go to beginning of current chapter/track or to
PREVIOUS chapter/track. Press and hold for two
seconds for a fast reverse search.
Rewinds the tape.
DVD OPEN/CLOSE (
)
Opens or closes the disc tray.
POWER
Switches the unit to ON or OFF.
MP3 MP3 disc inserted.
ANGLE active.
PROG. Programmed playback active.
TITLE Indicates current title number.
CHP/TRK Indicates current chapter or track number.
VCR DVD+VCR functions are available and channels are selected
at DVD+VCR.
TIMER DVD+VCR is in timer recording or a timer
recording is programmed.
A y B
Indicates A-B repeat mode.
ALL
Indicates repeat all mode.
REC DVD+VCR is Recording.
Child Lock is engaged.
CDREC DVD toVCR copy is in progress.
HI-FI Indicates the unit is playing
back a tape recorded in Hi-Fi.
REC
HI-FI
A
B
PROG. TITLE CHP/TRK VCR TIMER
CDREC
ALL MP3
BIL PR
VCD
DVD
ST
SP
LP
DVD DVD
inserted.
VCD Video CD
inserted
PR DVD+VCR is tuned to Channel XX.
BIL Indicates when a BILINGUAL broadcast is
being received.
SP LP
Displays the
recording and
CD Audio CD
inserted.
ST Indicates a stereo broadcast is being received.
Indicates total playing time, elapsed time, or current deck status
(Playback, Pause, etc).
playback speed.
A cassette is in theVCR deck.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
DVD/VCR select button
Select the output source (DVD orVCR) to
view on the TV screen.
POWER
Switches DVD+VCR ON and OFF.
EJECT, OPEN/CLOSE
TV/VCR
To view channels selected by theVCR tuner
or by the TV tuner.
-
-
Opens and closes the disc tray.
Ejects the tape in theVCR deck.
RETURN
Removes the setup menu.
0-9 numerical buttons
Selects numbered options in a menu.
POWER
DISPLAY
DISC MENU
Accesses menu on a DVD disc.
Accesses On-Screen display.
Switches among the clock, tape counter and
tape remaining modes.
TV/VCR
DVD
VCR OPEN/CLOSE
SYSTEM MENU
Accesses or removes DVD setup menu and
VCR menu.
EJECT
b/B/v/V (left/right/up/down)
- Selects an option in the menu
- v/V: Selects channel ofVCR.Adjusts
manually the tape’s picture onscreen.
1
4
2
5
8
0
3
SKIP ./REW
Skip to beginning of current chapter or
track, press twice in quick successions to go
to previous chapter or track.
Press and hold button for about two
seconds to search backward. (For DVD only)
Rewinds the tape during the STOP mode or
for fast reverse picture search.
6
OK
7
RETURN
9
- Acknowledges menu selection.
- Displays functions on the TV screen.
DISPLAY
STOP
Stops playback.
DISC
SYSTEM
MENU
MENU
PLAY
Starts playback.
SKIP > /FWD
Skip to next chapter or track.
Press and hold button for about two
seconds to search forward.(For DVD only)
Advances the tape during the STOP mode or
for fast forward picture search.
OK
PAUSE/STEP
Pause playback or recording
Press repeatedly for frame-by-frame playback
during pause.
PLAY
STOP
PAUSE/STEP
SUBTITLE
MARKER
Marks any point during playback.
Selects a subtitle language.
MARKER SEARCH INPUT REC/ITR
SUBTITLE AUDIO ANGLE ZOOM
AUDIO
SEARCH
Displays MARKER SEARCH menu.
Selects an audio language (DVD) or an audio
channel (CD).
INPUT
To select theVCR deck’s source
(Tuner,AV1,AV2 or AV3).
ANGLE
REPEAT REPEAT PROGRAM CLEAR
A-B
Selects a DVD camera angle if available.
ZOOM
REC/ITR
Records normally or activates Instant Timer
Recording with repeated presses.
TITLE SHUFFLE C.LOCK SHOW VIEW
Enlarges DVD/VCD video image.
LP
VIDEO PLUS
TITLE/LP
- Displays the disc’s Title menu, if
available.
- Selects recording speed
REPEAT
Repeat chapter, track, title, all.
REPEAT A-B
Repeats sequence.
SHUFFLE
-
Plays tracks in random order.
PROGRAM
Accesses or removes Program menu.
C.LOCK
Switch the Child Lock on and off.
CLEAR
- Resets tape counter to M 0:00:00
- Removes a track number on the
program menu or a mark on the
MARKER SEARCH menu.
SHOWVIEW
To display the programme menu for
ShowView programming.
Note
This remote control use the same buttons forVCR and DVD
functions (ex. PLAY).
When using aVCR, first press theVCR button.
When using a DVD, first press the DVD button.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
AERIAL
Connect the aerial using this jack.
EURO AV2 DECODER
Connect to pay-TV decoder or another video recorder.
DVD/VCR AUDIO OUT
Connect to an amplifier, receiver or stereo system.
AUDIO OUT (Left/Right) (DVD OUT)
Connect to an amplifier, receiver or stereo system.
DVD
EXCLUSIVE
OUT
VCR IN+OUT/DVD OUT
DVD/VCR
AUDIO OUT
AERIAL
AUDIO
OUT
EURO AV2
DECODER
R
L
R
L
EURO AV1
AUDIO/
VIDEO
RF OUT
DVD/VCR
OUT
COAXIAL
COAXIAL (Digital audio out jack) (DVD OUT)
Connect to digital (coaxial) audio equipment.
EURO AV1 AUDIO/VIDEO (VCR IN+OUT/DVD OUT)
Connect to your TV set or another video recorder.
RF OUT (DVD/VCR OUT)
Connect to your TV using this jack.
Mains lead
Connect to a power
source.
Do not touch the inner pins of the jacks on the
rear panel. Electrostatic discharge may cause
permanent damage to the unit.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Tips
G Depending on your TV and other equipment you wish to
connect, there are various ways you could connect the
unit.
G Please refer to the manuals of your TV, Stereo System or
other devices as necessary to make the best connections.
G For better sound reproduction, connect this unit’s AUDIO
OUT jacks to the audio in jacks of your amplifier, receiver,
stereo or audio/video equipment. See “Connecting to
optional equipment” on page 11.
Caution
– Make sure this unit is connected directly to the TV. Set the
TV to the correct video input channel.
– Do not connect this unit’s AUDIO OUT jack to the
phono in jack (record deck) of your audio system.
Connecting to aTV & Decoder
G Make one of the following connections, depending on the
capabilities of your existing equipment.
Basic connection (AV)
Connect the EURO AV1 AUDIO/VIDEO on the rear
1
panel of this unit to the SCART input socket on the TV
using a SCART lead.
Some TV broadcasters transmit encoded television signals
2 which you can only see with a purchased or rented
decoder.You can connect such a decoder (descrambler) to
the DVD+VCR.
Basic connection (RF)
DVD
EXCLUSIVE
OUT
VC
DVD/VCR
AUDIO OUT
AERIAL
AUDIO
OUT
Connect the RF antenna cable from your indoor/ outdoor
EURO AV2
DECODER
1
antenna to AERIAL jack on the rear panel of this unit.
R
L
R
L
EURO AV1
AUDIO/
VIDEO
RF OUT
Connect the supplied RF antenna cable from the RF OUT
2 (DVD/VCR OUT) jack on the rear panel of this unit to
your television’s Antenna Input.
DVD/VCR
T
COAXIAL
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (Cont’d)
Connecting to Optional
Equipment
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic II/Pro
Logic
Notes
– If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
– To see the audio format of the current DVD in the
On-Screen Display, press AUDIO.
Connect the Left and Right DVD/VCR AUDIO OUT or
AUDIO OUT (DVD EXCLUSIVE OUT) jacks on this
unit to the audio left and right in jacks on your amplifier,
receiver or stereo system, using the audio cables.
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/Video
receiver equipped with a multi-channel decoder
(Dolby Digital™, MPEG 2 or DTS)
Connect one of this unit’s DIGITAL AUDIO OUT jack
(COAXIAL) to the corresponding in jack on your
DVD
VCR IN+OUT/DVD OUT
DVD/VCR
AUDIO OUT
EXCLUSIVE
OUT
AERIAL
AUDIO
OUT
EURO AV2
DECODER
1
R
L
amplifier. Use an optional digital (coaxial) audio cable.
R
L
EURO AV1
AUDIO/
RF OUT
VIDEO
You will need to activate this unit’s digital output. (See
DVD/VCR
OUT
2 “Digital Audio Output” on page 19).
COAXIAL
2 channel analog stereo or Dolby Pro Logic ll / Pro Logic connection.
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your unit (MPEG 2, Dolby
Digital and DTS). Check the receiver manual and the logos
on the front of the receiver.
Warning:
Due to the DTS Licensing agreement, the digital output
will be in DTS digital out when DTS audio stream is
selected.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation -VCR part
Using your DVD+VCR for the very first time
Tuning in a video channel on your
TV
Video channel (RF output channel) is the channel on
which your TV receives picture and sound signals from the
DVD+VCR through the RF cable.
For the following steps we assume that you have just
connected your DVD+VCR for the very first time.
To make tuning TV stations an easy task your DVD+VCR
incorporates the Automatic Channel Memory System
(ACMS).This system will automatically tune and store TV
channels in your DVD+VCR.
If you have used a SCART lead you will not have to tune
yourTV, simply select the AV channel.The AV channel is
already pre-tuned for optimum video playback on yourTV.
Make sure that you have correctly installed your
1
DVD+VCR.
Press 1 to turn on your DVD+VCR.
If the initial Menu Screen doesn’t appear on screen, make
sure that you have tuned your TV to a video channel. Or if
this is correct it may mean that your DVD+VCR is already
tuned.
Perform the following steps only if interference appears in
the TV picture after you have moved to a different area or
a new station has started broadcasting in your area, or if
you change the connection from RF connection to AV
connection, or vise versa.
Turn on DVD+VCR andTV.
1
2
3
4
A
N
B
CH
P
D
DK
E
F
I
NL
S
SF ANDERE
Set the vacant position 36 on yourTV.
Pr-12
ACMS
OK
i
Press 1on the remote control to enter the standby
mode (the clock indicator will be dimmed).
Press b or B to select the desired country.
(A:Austria, B: Belgium,CH: Switzerland, D: Germany, DK:
Denmark, E: Spain, F: France, I: Italy, N: Norway, NL:
Netherlands, P: Portugal, S:Sweden, SF: Finland,ANDERE:
Others.)
2
3
Press and hold REW or FWD on the
DVD+VCR for more than 4 secs.
RF 36 will appear in the DVD+VCR display.
The following picture will be displayed on the TV screen.
Press OK to start the automatic tuning process.
01
02
03
C02
C03
C04
00
00
00
PR-01
PR-02
PR-03
RF KANAL
36
i
P
R
SET
S
E
Pr-12
i
ACMS
If the picture is snowy, move to step 5. If the picture is
clean, press 1 on the DVD+VCR to finish.
Press SYSTEM MENU to remove the menus from
theTV screen.
Press REW or FWD on the DVD+VCR to set the
4
5
video channel to a vacant position between 22 and
68 which is not occupied by any local station in your
area.
Note
The RF channel will not change until step 6 has been
executed.
Press
1
to store the new RF video channel into the
6
DVD+VCR memory.
Now tune yourTV set to the new DVD+VCR RF
channel.
Note
If the TV picture was clear in step 4, do not retune your
TV.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation -VCR part
To set the colour system
Setting the clock Manually
The clock in your DVD+VCR controls time and date
settings for your DVD+VCR.
Press SYSTEM MENU.
1
The main menu will appear on the TV screen.
Press SYSTEM MENU.
2
1
Press b or B to select TIME DATE.
Press OK.
Press 1 or 2 to select the SYSTEM and press OK.
3
Press 3 or 4 to select according to the COLOUR
4 system used.
HH MN DD MM YY
:
-
-
.
.
- - - - -
- -
- -
- -
1
2
TIME
i
DATE
Use the numbered buttons on the remote control to
2 alter the HOURS, MINUTES, DAY, MONTH and
YEAR.
VCR
A B
C
AUTO
SYS-
TEM
RE
AUDIO
Dr.
OSD
SYS-
TEM
PAL
NIC
M
SECAM
E
DECO-
OK
i
OPR
OFF 4:3
DER
Please note your DVD+VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
Press SYSTEM MENU to remove the menus from the
The day of the week will appear automatically when you
enter the year.
5 TV screen.
HH MN DD MM YY
8
:
00
1
.
01
.
03 WED
1
2
TIME
i
DATE
If you make a mistake press b or B and enter the
3 correct details.
Press SYSTEM MENU.
4
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation -VCR part
How to using the main menu
ThisVCR can easily be programmed by using the menus
displayed on screen.
Tuning inTV Stations
Automatically
If the TV broadcast signal is weak yourVCR may not
detect the necessary information and will be and to store
them correctly.To overcome this problem please turn to
the MANUAL TUNING section on page 15.
The menus are controlled from the Remote Control
Handset.
Switch on yourTV set and video recorder by pressing the
1
1 button.
Press 1 to turn on yourVCR.
Press SYSTEM MENU button.
1
2 The main menu will appear on the TV screen.
Press SYSTEM MENU button.
2 The main menu will appear on the TV screen.
Press 1 or 2 to select the ACMS.
Press OK.
VCR
1
2
A B
Pr-12
C
P
TIME SYS-
SET
REC
AUDIO
ACMS
R
OSD Dr.
DATE
TEM
+
-
REC
OK
NIC
f
OSD
ON
OFF 4:3
16:9 DECO-
DER
i
OPR
VCR
1
2
A B
C
Pr-12
P
TIME
SYS-
TEM
SET
REC
AUDIO
ACMS
OSD
R
Dr.
DATE
Pr-12
+
-
NIC
ACMS
f
OSD
ON
OFF
DECO-
DER
16:9
4:3
G REC - Timer recording setting (see p. 24).
G PR SET - Manual tuning setting (see p. 15).
G ACMS - ACMS (Automatic Channel Memory System)
(see p. 14).
OPR
OK
i
G TIME DATE - Date & clock setting (see p. 13).
G SYSTEM - To set the Colour TV System (see p. 13).
G ABC OSD - To change the language setting for OSD.
You can select the language among
A
N
B
NL
CH
P
D
S
DK
E
F
I
SF OTHERS
Pr-12
OK
i
ACMS
English, Deutsch, Français, Italiano,
Español, Nederlands and Portuguese.
Press 1 or 2 to select COUNTRY.
G Dr. - To check a problem with yourVCR (see p. 32).
G AUDIO - To select the channel for audio output.
G F.OSD ON/OFF - To display the operational
mode of yourVCR (see p. 32).
G 16:9/4:3 - To select the aspect ratio of your TV
(see p.33).
3 (A:Austria, B:Belgium, CH:Switzerland, D:Germany,
DK:Denmark, E:Spain, F:France, I:Italy, N:Norway,
NL:Nertherlands, P:Portugal, S:Sweden, SF:Finland,
OTHERS)
Press OK again to start the automatic tuning process.
G DECODER - To use a pay-TV decoder (or Satellite)
with yourVCR (see p.33).
G OPR - To improve the playback picture (see p. 21).
G NIC - To activate or deactivate the NICAM digital
sound (see p. 33).
01
02
03
C02
C03
C04
00
00
00
PR-01
PR-02
PR-03
S
E
Pr-12
i
ACMS
Press 1 and 2 to select the desired menu.
3 Press OK and use 3 or 4 to select.
The TV STATIONTABLE will appear when tuning is
Press SYSTEM MENU to return to a TV picture.
4 complete.
4
Press SYSTEM MENU to save your settings.
01
02
03
04
05
06
07
08
C02
C03
C04
C05
C06
C07
C08
C09
00
00
00
00
00
00
00
00
PR-01
PR-02
PR-03
PR-04
PR-05
PR-06
PR-07
PR-08
MOVE:
DELETE:
P
R
SET
,
OK
i
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation -VCR part
Press 2 to select STATION so that you may name
5 your TV station.
Tuning inTV Stations Manually
In certain areas of the country broadcast signals may be
too weak for yourVCR’s automatic tuning process to find
or assign TV stations correctly.
You must tune in these weaker broadcast stations
manually in order for yourVCR to store them.
Press OK.
The TV station name list will appear.
ARD
ZDF
WDR 3
BR3
HR3
N 3
PR
09
CH
C10
MFT
00
NDR3
SWF3
Press SYSTEM MENU.
The main menu will appear on the TV screen. Press 1 or
P
1
SET
OK
i
R
2 to select the PR SET.
Press OK.
Use D or E to select a station name from the list.
6 Press OK to select it.
If your station name isn’t on the list do not press
OK, but go to stage 7.
PR
01
CH
C 02
MFT
00
STATION
PR-01
ARD
ZDF
WDR 3
BR3
VCR
1
2
A B
C
Pr-12
P
TIME SYS-
SET
REC
AUDIO
ACMS
R
OSD
Dr.
DATE
TEM
P
SET
CHANNEL/CABLE : AV
+
-
R
NIC
f
OSD
ON 16:9
DECO-
DER
P
OK
i
i
SET
OPR
OFF 4:3
R
HR3
N 3
PR
09
CH
C10
MFT
00
NDR3
SWF3
Press SYSTEM MENU.
2 The station table will appear.
P
SET
OK
i
R
Press 3 or 4 to select the programme number that you
want to tune (for example, PR 09).
You can change a TV station name manually rather than
using the “standard” names.
7
Press G.
01
02
03
04
05
06
07
08
C02
C03
C04
C05
C06
C07
C08
C09
00
00
00
00
00
00
00
00
PR-01
PR-02
PR-03
PR-04
PR-05
PR-06
PR-07
PR-08
Use 3 or 4 to select letters and numbers for the
new station name.
Use 1 or 2 to move back and forth between
characters.
Press OK.
MOVE :
DELETE :
P
SET
,
OK
i
R
Press OK.
PR
C09
CH
C10
MFT
00
STATION
WDR 3
3 Press INPUT to select C (Standard stations) or S
(Cable stations): C02 - C69, S01 - S41.
Enter the channel number of station that you want to
tune with the numbered buttons or use 3 or 4 to
find the required station.
P
SET
i
OK
R
Press SYSTEM MENU, confirm the station placement.
8 Press SYSTEM MENU again.
Your new TV station has now been tuned into yourVCR.
If you wish to manually tune other stations repeat stages
1 - 8.
PR
09
CH
C - -
MFT
- -
STATION
- - - -
CHANNEL/CABLE : AV
P
SET
i
09
C10
00
WDR 3
R
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
10
11
12
13
14
15
16
Searching will stop when it locates a stations.
4 Press 2 to select MFT.
MOVE :
DELETE :
Control the fine tuning of the station by using 3 or 4.
P
,
OK
i
SET
R
PR
09
CH
C10
MFT
00
STATION
- - - -
CHANNEL/CABLE : AV
P
i
SET
R
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation -VCR part
Changing the order ofTV Stations DeletingTV Stations
After tuning TV stations into yourVCR you may wish to
change the order in which they are stored without having
to retune them again.The instructions given on this page
will show you how you can simply move them into your
After tuning TV stations into yourVCR you may wish to
delete a station.
The instructions given on this page will show you how you
can easily delete any unwanted TV stations.
1desired order.
1
Press SYSTEM MENU.
Press SYSTEM MENU.
The main menu will appear on the TV screen.
Press 1 or 2 to select the PR SET.
Press OK.
The main menu will appear on the TV screen.
Use 1 or 2 to select the PR SET.
Press OK.
VCR
1
2
A B
C
VCR
1
2
Pr-12
A B
C
P
TIME SYS-
Pr-12
SET
REC
AUDIO
ACMS
R
OSD
Dr.
P
SET
R
TIME SYS-
DATE
TEM
P
REC
AUDIO
ACMS
OSD
Dr.
DATE
SET
TEM
+
-
R
P
f
NIC
OSD
ON
OFF
SET
+
-
R
f
NIC
OSD
ON
OFF
16:9
4:3
DECO-
DER
OK
i
16:9
4:3
OPR
DECO-
DER
OK
i
OPR
PR
01
CH
C 02
MFT
00
STATION
PR-01
PR
01
CH
C 02
MFT
00
STATION
PR-01
CHANNEL/CABLE : AV
CHANNEL/CABLE : AV
P
SET
OK
i
R
P
SET
OK
i
R
Press SYSTEM MENU.
Press SYSTEM MENU.
2
Use 3 or 4 to select the programme number you
want to move (for example, PR 03).
Press 2.
2
3
4
Press 3 or 4 to select the programme number you
want to delete. (for example, PR 03)
01
02
03
04
05
06
07
08
C02
C03
C05
C06
C04
C07
C08
C09
00
00
00
00
00
00
00
00
PR-01
PR-02
PR-03
PR-04
PR-05
PR-06
PR-07
PR-08
01
02
03
04
05
06
07
08
C02
C03
C04
C05
C06
C07
C08
C09
00
00
00
00
00
00
00
00
PR-01
PR-02
PR-03
PR-04
PR-05
PR-06
PR-07
PR-08
MOVE :
DELETE :
MOVE:
P
SET
P
,
OK
i
R
SET
DELETE:
,
OK
i
R
Press 1.
01
C02
00
00
00
PR-01
PR-02
PR-03
After a short while, the selected station will be
deleted.
02
03
04
C03
C04
C05
00
00
00
00
00
PR-04
PR-05
PR-06
PR-07
PR-08
05
06
07
08
C06
C07
C08
C09
01
02
03
04
05
06
C02
00
PR-01
PR-02
PR-03
PR-04
PR-05
PR-06
C03
C05
C06
C04
C07
00
00
00
00
00
P
SET
OK
i
R
07
08
C08
C09
00
00
PR-07
PR-08
Use 3 or 4 to select the programme number you
want to move to (for example, PR 05).
MOVE :
3
4
P
,
DELETE :
OK
i
SET
R
01
02
03
04
05
06
07
08
C02
C03
C05
C06
C04
C07
C08
C09
00
00
00
00
00
PR-01
PR-02
PR-04
PR-05
PR-03
Press SYSTEM MENU to remove the menus from the
TV screen.
If you wish to delete other TV stations repeat stages 1 -
00
00
00
PR-06
PR-07
PR-08
3.
P
SET
OK
i
R
How to select StoredTV stations:
Stored TV stations can be selected in either of two ways.
Use 3 or 4 to select different stations that are tuned into
your DVD+VCR.
Press OK.
The selected programme will be moved to the new
programme number.
You may also directly select stations using the
numbered buttons on the remote control.
If you wish to move otherTV stations repeat stages 1 - 4.
Press SYSTEM MENU to remove the menus from the
TV screen.
01
02
03
04
05
C02
C03
C05
C06
C04
00
00
00
00
00
PR-01
PR-02
PR-03
PR-04
PR-05
06
07
08
C07
C08
C09
00
00
00
PR-06
PR-07
PR-08
MOVE :
P
DELETE :
,
OK
i
SET
R
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation - DVD part
Temporary Feedback Field Icons
General Explanation
This manual gives the basic instructions for operating the
DVD+VCR. Some DVDs require specific operation or
allow only limited operation during playback.When this
TITLE
RepeatTitle
CHAPT
Repeat Chapter
TRACK
RepeatTrack (non-PBCVideo CDs and
Audio CD only)
occurs, the symbol
that the operation is not permitted by the DVD+VCR or
is not available on the disc.
appears on the TV screen, indicating
ALL
Repeat Disc (non-PBCVideo CDs and Audio
CD only)
On-Screen Display
A
B
Repeat A-B
The general playback status can be displayed on the TV
screen. Some options can be changed on the menu.
OFF
Repeat Off
On-screen display operation
Resume play from this point
Action prohibited or not available
Press DISPLAY during playback.
1
Use v/V to select an item.
2 The selected option will be highlighted.
Notes
G Some discs may not provide all of the features on the on-
screen display example shown below.
G If no button is pressed for 10 seconds, the on-screen
display disappears.
Use b/B to change the setting of an item.
3 The number buttons can also be used for setting
numbers (e.g., title number). For some functions, press
OK to execute the setting.
DVD
Options
Selection Method
Function (Use v/V to select desired option)
b/B, or
Numeric, OK
Shows the current title number and total number of
titles, and skips to the desired title number.
Title Number
Chapter Number
Time search
1 /3
1 /12
b/B, or
Numeric, OK
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
Shows the elapsed playing time, and
searches the point by the elapsed time directly.
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes the setting.
Numeric, OK
0:20:09
Audio language
and Digital Audio
Output mode
1 ENG
D
5.1 CH
b/B, or AUDIO
Shows the current subtitles language, and
changes the setting.
b/B, SUBTITLE
ABC
Subtitle language
Angle
OFF
1 /1
Shows the current angle number and total number of
angles, and changes the angle number.
b/B,ANGLE
Shows the current sound mode, and
changes the setting.
Sound
b/B
NORM.
VCD1.1
VCD2.0
Items
Selection Method
Function (Use v/V to select desired option)
b
/
B, or
Shows the current track number, total number of tracks
and PBC On mode, and skips to the desired track number.
Track Number
Time
1 /4
Numbers, OK
0:20:09
Shows the elapsed playing time (Display only)
–
Shows the audio channel, and
changes the audio channel.
Audio Channel
Sound
b
/
B, or AUDIO
STER.
Shows the current sound mode, and
any changes to the setting.
b / B
NORM.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation (Continued) - DVD part
Menu Language
Select a language for the setup menu.This is the menu you
see when you press SYSTEM MENU.
Initial Settings
You can set your own Personal Preferences on the
player.
English
Spanish
French
German
Italian
Disc Audio
Disc Subtitle
Disc Menu
Rating
General Operation
Press SYSTEM MENU.
Country Code
TV Aspect
1
The setup menu appears.
Portuguese
Dutch
Menu Language
Original
English
French
Disc Audio
Disc Subtitle
Disc Menu
Digital Audio Output
Others
Rating
German
Spanish
Italian
Country Code
TV Aspect
Menu Language
Chinese
Polish
Picture
Digital Audio Output
Others
Hungarian
Other – – – –
DVD
TV Aspect
4:3 Letterbox: Select when a standard 4:3 TV is
connected. Displays theatrical images with masking bars
above and below the picture.
4:3 Panscan: Select when a conventional TV set is
connected.The video material formatted in the Pan & Scan
style is played back in that style (Both sides of the picture
are cut off.)
Use v/V to select the desired item.
2 The screen will show the current setting for the selected
option, as well as alternate setting(s).
While the desired option is selected, press B,
3 then v/V to select the desired setting.
16:9 Wide: Select when a 16:9 wide TV is connected.
Press OK to confirm your selection.
4 Some items require additional steps.
4:3 Letterbox
4:3 Panscan
16:9 Wide
Disc Audio
Disc Subtitle
Disc Menu
Press SYSTEM MENU, RETURN, or PLAY N to
5 exit the setup menu.
Rating
Country Code
TV Aspect
Menu Language
Language
Digital Audio Output
Others
DVD
Disc Language
Select a language for the disc’s Menu,Audio, and Subtitle.
Original :The original language set for the disc is
selected.
Other :To select another language, press number buttons
to enter the corresponding 4-digit number according to
the language code list on page 36. If you enter the wrong
language code, press CLEAR.
Notes
Disc Language selection may not work for some DVDs.
Original
English
French
Disc Audio
Disc Subtitle
Disc Menu
Rating
German
Spanish
Italian
Country Code
TV Aspect
Menu Language
Chinese
Polish
Digital Audio Output
Others
Hungarian
Other – – – –
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation (Continued) - DVD part
Sound
Others
The DRC,Vocal, PBC and Auto Play settings can be
changed.
Digital Audio Output
Each DVD disc has a variety of audio output options. Set
the DVD+VCR’s Digital Audio Output according to the
type of audio system you use.
G Use v/V to select the desired item and press OK.The
setting of the selected item alternates between On and
Off.
DRC On
Disc Audio
Disc Subtitle
Disc Menu
DOLBY DIGITAL/PCM:
Vocal On
PBC On
Select DOLBY DIGITAL/PCM if you connected the
DVD+VCR’s DIGITAL AUDIO OUT jack to a Dolby
Digital decoder (or an amplifier or other equipment with
a Dolby Digital decoder).
Auto Play Off
Rating
Country Code
TV Aspect
Menu Language
Digital Audio Output
Others
Stream/PCM:
Select Stream/PCM if you connected the DVD+VCR’s
DIGITAL AUDIO OUT jack to an amplifier or other
equipment with a DTS decoder, Dolby Digital decoder or
MPEG decoder.
Dynamic Range Control (DRC)
With the DVD format, you can hear a program’s
soundtrack in the most accurate and realistic presentation
possible, thanks to digital audio technology. However, you
may wish to compress the dynamic range of the audio
output (the difference between the loudest sounds and
the quietest ones).Then, you may listen to a movie at a
lower volume without losing clarity of sound. Set DRC to
On for this effect.
PCM: Select when connected to a 2 channel digital stereo
amplifier.The DVD+VCR output sounds in the PCM 2ch
format when you play a DVD video disc recorded on the
Dolby Digital, MPEG1, or MPEG2 recording system.
DOLBY
DIGITAL /PCM
Stream/PCM
PCM
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Sample Freq.
48 KHz
Vocal
SetVocal to On only when a multi-channel karaoke DVD
is playing.The karaoke channels on the disc will mix into
normal stereo sound.
Menu Language
96KHz
Digital Audio Output
Others
PBC
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played according to the
PBC.
Off: Video CDs with PBC are played the same way as
Audio CDs.
Sample Frequency
To change the Sample Frequency setting, first select the
desired Digital Audio Output as indicated as above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz.When this choice is made,
this unit will automatically convert any 96KHz signals to
48KHz so your system can decode them.
If your receiver or amplifier is capable of handling 96KHz
signals, select 96KHz.When this choice is made, this unit
will pass each type of signal through without any further
processing.
DVD
Auto Play
You can set up the DVD Player so a DVD disc
automatically starts playing whenever the DVD is inserted.
If Auto Play mode is set to On, this DVD player will search
a title that playback time is long most and then play back
the title automatically.
On: Auto Play function is activated.
Off: Auto Play function is not activated.
Note
The Auto Play function may not work for some DVDs.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation (Continued) - DVD part
Parental Control
Area Code
DVD
DVD
Enter the code of a country/area whose standards were
used to rate the DVD video disc, referring to the list (See
“Country/Area Code List”, page 37).
Rating
Movies on DVDs may contain scenes not suitable for
children.Therefore, discs may contain Parental Control
information that applies to the complete disc or to
certain scenes on the disc.These scenes are rated from 1
to 8, and alternatively, more suitable scenes are available
for selection on some discs. Ratings are
country dependent.The Parental Control feature allows
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Code Set
Disc Audio
Disc Subtitle
Disc Menu
D
E
Rating
Country Code
TV Aspect
Menu Language
Digital Audio Output
Others
8
Disc Audio
Disc Subtitle
Disc Menu
7
6
Rating
Select Country Code using the v/V buttons on
the setup menu.
5
Country Code
TV Aspect
4
1
3
Menu Language
While Country Code is selected, press B.
2
1
2
3
4
Digital Audio Output
Others
Unlock
Change
Follow step 3 of “Rating” on left.
Select the first character using the v/V buttons.
Shift the cursor using 2 button and select the
Select “Rating” on the Setup menu using the
v/V buttons.
1
2
While “Rating” is selected, press B.
5 second character using v/V buttons.
Press OK to confirm your Area code
6 selection, then press SYSTEM MENU to exit the
menu.
When you have not entered a password yet.
3 Enter a 4-digit password using the numbered buttons to
create a personal 4-digit security password, then press
OK. Enter the 4-digit password again and press OK to
verify.
Note
Confirmation of the 4-digit password is necessary when
the password is changed (see “Changing the 4-digit Code”
below ).
When you have already entered a password;
Enter a 4-digit password using the numerical buttons to
confirm the personal 4-digit security password, then
press OK.
Changing the 4-digit Code
If you make a mistake before pressing OK, press CLEAR
and enter 4-digit security password again.
1 Follow Steps 1-2 as shown above to the left (Rating).
2 Enter the old password, then press OK.
3 Select Change using v/V buttons then press OK.
4 Enter the new 4-digit password, then press OK.
5 Enter exactly the same password a second time and verify
by pressing OK.
Select a rating from 1 to 8 using v/V buttons.
4 Level 1 : DVD software for adults cannot be
played back.
Level 8 :All DVD software can be played back.
The limitation will be more severe as the level
number is lower.
6 Press SYSTEM MENU to exit the menu.
Unlock: If you select Unlock, Parental Control is not
active.The disc will play in full.
If you forget your 4-digit Code
If you forget your password, clear the current password
by following the procedure below.
1 Press SYSTEM MENU to display the setup menu.
2 Use the Number buttons to enter the 6-digit number
“210499”.
Ratings 1 to 8: Some discs contain scenes not suitable
for children. If you set a rating for the DVD+VCR, all disc
scenes with the same rating or lower will be played.
Higher rated scenes will not be played unless an
alternative scene is available on the disc.The alternative
must have the same rating or a lower one. If no suitable
alternative is found, playback will stop.You must enter the
4-digit password or change the rating level in order to
play the disc.
The 4-digit password is cleared.
3 Enter a new password as shown above to the left (Rating).
Press OK to confirm your rating selection, then
5 press SYSTEM MENU to exit the menu.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with tape
Slow motion playback, Shuttle :
Playing a tape
5 During playing back or still picture press b or B.
You can reach the following playback speeds. (-7xplay, -
3xplay, -play, still, 1/19 slow, play, 2xplay, 7xplay)
To switch off the slow motion and shuttle, press the
desired function.
You will only be able to load and eject video cassettes
when yourVCR is plugged into the mains.
YourVCR may also playback recordings from NTSC tapes
(on PAL TV).
Getting a better picture
During slow motion and shuttle, the noise bars may
appear on the picture according to the status of tape.
If distortions can be seen in the picture, reduce them
with v or V.
When a cassette is inserted and playback started, the
automatic tracking function works to get the best possible
picture automatically. If the quality of the recording is
poor, repeatedly press v or V on the remote control to
manually adjust the tracking until any distortions have
been removed.
Press STOP to end playback.
6 Press EJECT.
If the end of the tape is reached, your DVD+VCR will
stop playback automatically, rewind, stop, eject the tape.
Press numbered 0 on the remote control to switch
automatic tracking back on again.
OPR (Optimum Picture Response)
This feature automatically improves playback picture
quality by adjusting your DVD+VCR to the condition of
the tape.
Make sure that you have correctly connected yourVCR
as described earlier in this book.
Turn on your TV.
Press 1 to turn on your DVD+VCR.
Insert the video cassette into your DVD+VCR.
The video cassette should have the window side facing
up and the arrow facing away from you.
1
Press SYSTEM MENU.
1
Press PLAY N to start playing your tape.
2 If you load a video cassette which has had its record
protection tab removed, playback of the cassette will
start automatically.
VCR
1
2
A B
C
OFF
12
SYS-
TEM
TIME
R
S
SOFT
OSD
Dr.
DATE
+
-
NIC
SHARP
OPR
ON
OFF 4:3
AUTOTRACKING
16:9 DECO-
DER
i
AUDIO
OPR
Your DVD+VCR will automatically adjust the tracking to
give the best picture quality.
Press v or V to select OPR.
Press PAUSE/STEP
3 Press PAUSE/STEP
frame by frame.
X
X
to still a picture.
repeatedly to advance the tape
2
3
Press OK.
If you hold down >, the picture will be slowed down
at about 1/19 times the normal playback.
Tapes can be paused for up to 5 minutes.After 5
minutes your DVD+VCR will stop the tape to prevent
damaging the tape or your DVD+VCR .
Still picture quality can be improved slightly by using v
or V.
Press 3 or 4repeatedly to select: OFF, SOFT or
4 SHARP.
Please note you may only set OPR when
playing a tape.
Press SYSTEM MENU return to screen.
5
Press PLAY N to continue playing your tape.
4
Picture search:
During playing back press either . or > to this will
enable you to rapidly wind the tape (7 times normal
playback) see where you are on the tape.
Logic search:
During fast forwarding or rewinding press and hold .
or > the picture will be played back at 7 times normal
playback speed.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with tape (Continued)
InstantTimer Recording (ITR)
YourVCR allows you to make recordings using a variety
of simple methods:
InstantTimer Recording (ITR) start recording
immediately for a set period of time or until the video
cassette runs out.
Press LP if you wish to record in Long Play or Standard
5 Play.
SP will produce improved picture and sound quality,
however LP will provide twice as much recording time
as SP.
Press REC/ITR on the remote to start recording.
6 RECORD will appear on the TV screen.
Press RECORD on your unit or press REC/ITR on
the remote several times. Each successive press will
increase the record time by 30 minutes until you reach
a maximum of 9 hours.
Your DVD+VCR incorporates Long Play (LP) which
enables you to record up to twice the amount of time on
a video cassette. For example an E-180 will record up to
180 minutes using Standard Play (SP); using LP you will be
able to record up to 360 minutes. Please note there will
be a slight loss in picture and sound quality when using LP.
Press PAUSE/STEP
scenes.
X
to avoid recording unwanted
7
Make sure that you have correctly connected yourVCR
Press PAUSE/STEP
X
to continue recording.
1
as described earlier in this book.
Press 1 to turn on yourVCR.
If you press PAUSE/STEP
X
during ITR, the DVD/VCR
will enter the record pause mode and ITR is cancelled.
Tapes can be paused for up to 5 minutes; RECP will be
displayed when a tape is paused.After 5 minutes your
DVD+VCR will stop recording to
prevent damaging the tape or your DVD+VCR.
Press STOP twice within 5 seconds to end
Insert a video cassette with protection tab into your
2 VCR.
The video cassette should have the window side facing
up and the arrow facing away from you.
8 recording.
Press v or V to select the programme number you
3 wish to record.
EJECT will appear on the TV screen for a few
seconds.
You may also directly select programme number using
the numbered buttons on the remote control.
Notes
If you wish to record directly from the SCART or RCA
4 sockets repeatedly press INPUT until the socket you
wish to record from is displayed.
G If you do not wish to record on a tape (this can
happen quite easily by accident!) remove the
protection tab on the back edge of the video cassette.
G It is possible to record on a video cassette with the
record protection tab removed by covering the hole with
self adhesive tape.
G Remember you can record one programme while
watching another by starting your instant recording, press
TV/VCR to disappear VCR indicator in the
display window and then selecting a different channel on
your TV.
AV 1 for recording from EURO AV1 SCART socket on
the rear of your unit.
AV 2 for recording from EURO AV2 SCART socket on
the rear of your unit.
AV 3 for recording fromVIDEO IN and AUDIO IN
(Left & Right) sockets on the front of your unit.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with tape (Continued)
Press F or G to select the settings that you wish to
6 revise. (PR, DATE,TIME and SP).
ShowView Programming
ShowView greatly simplifies entering the date, channel,
start and end times of a Timer Recording by simply
entering a ShowView Code. ShowView Codes are
published in most TV guide magazines; they can vary one
to nine numbers in length.
Press D or E to enter the correct information.
PR
DATE
TIME
SP
SP
SP
SP
SP
SP
SP
PR-01 12
10:11~11:55
- -: - -~ - -: - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
SHOWVIEW is a registered trademark of Gemstar
Development Corporation.
i
The SHOWVIEW system is manufactured under licence
from Gemstar Development Corporation.
Press G to select the recording speed.
Press D or E to select the desired tape speed (SP, IP, or
LP).
IP mode determines how much tape is left and switches
speed from SP to LP, if necessary, to complete recording
the program.
Check that the timer event details are correct.
If you wish to record from AUDIO IN andVIDEO IN on
the front or from either of the EURO SCART sockets on
the back ofVCR, press INPUT to select for correct
display (AV1,AV2 or AV3).
7
Make sure that TV channels have been tuned and stored
1
in correct SHOWVIEW order.
Insert a video cassette with protection tab into your
VCR.
Press SHOWVIEW.
2
- - - - - - - - -
PR
PR-01 12
DATE
TIME
ONCE
REC SHOWVIEW
0~9,
OK
i
10:11~11:55
- -: - -~ - -: - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
SP
SP
SP
SP
SP
SP
SP
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
Press D or E to select the recording type.
ONCE:To record once.
WEEKLY:To record at the same time every week.
DAILY:To record every day (except Saturday and
Sunday) at the same time.
3
4
i
If you want to make another ShowView recording
8 repeat stages 2 - 7.
Press the numbered buttons to enter the
ShowView Code of the TV programme that you wish
to record.
If you make a mistake press F then enter the revised
number.
Press SYSTEM MENU twice.
If PLEASE CHECK is displayed, you have entered
incorrect information and will need to re-enter the data.
Press 1 to switch yourVCR power off mode.
TIMER will appear in the video recorder’s display while
yourVCR waits to make the recording.
To watch a DVD during timer recording standby mode,
press POWER and DVD to switch to DVD mode.
246876543
ONCE
SHOWVIEW
0~9,
OK
i
REC
Press OK.
5
If PLEASE CHECK is displayed it means that you have
entered the wrong ShowView number, entered the
ShowView number incorrectly.
If “- -” is displayed, you have to enter the programme
number of the station, you want to record from.
PR
DATE
TIME
PR-01
- -
- -
- -
- -
12
- -
- -
- -
- -
- -
- -
SP
SP
SP
SP
SP
SP
SP
10:11~11:55
- -: - -~ - -: - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -
- -
i
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with tape (Continued)
Press the numbered buttons to enter the recording
start and end times of the programme that you wish to
record.
Timer recording using On Screen
Display
You may set up to seven timer record events within one
month of the current date.
6
7
Please note your DVD+VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
You may also select the start and end times by using v or
V.
PR
PR-01
- -
- -
- -
- -
- -
- -
DATE
16
- -
- -
- -
- -
- -
- -
T
I
M
E
Note
19:00~ 20:00
- -: - -~ - -: - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
SP
SP
SP
SP
SP
SP
SP
Before setting the timer make sure that you have set the
DVD+VCR clock correctly and you know which stations
you have tuned TV stations on your DVD+VCR.
i
Insert a video cassette with protection tab into your
1
DVD+VCR.
Press B to select the recording speed.
Press v or V to select the desired tape speed
(SP, IP, or LP).
IP mode determines how much tape is left and switches
speed from SP to LP, if necessary, to
complete recording the program.
The video cassette should have the window side facing
up and the arrow facing away from you.
Press SYSTEM MENU.
2
Press 1 or 2 to select REC.
Press OK.
Press OK to start setting the timer record event.
PR
DATE
16
- -
- -
- -
- -
- -
- -
T
I
M
E
3
If all timer record events are full press v or V to select
19:00~ 20:00
- -: - -~ - -: - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
PR-01
- -
- -
- -
- -
SP
SP
SP
SP
SP
SP
SP
the event that you wish to remove and replace.
Press b to delete the event.
- -
- -
PR
DATE
- -
- -
- -
- -
- -
- -
- -
T I M E
- -: - -~ - -: - -
- -: - -~ - -: - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -
- -
- -
- -
- -
- -
- -
SP
SP
SP
SP
SP
SP
SP
i
Press SYSTEM MENU to set another timer record
event and follow steps 3 to 7.
i
Check that the timer event details are correct.
8 Press SYSTEM MENU twice.
Press the numbered buttons to enter the station that
you wish to record.
When selecting stations 1 - 9, press 0 first, then the
channel number; for example Stations 3 - 03.You may
also select Channels by pressing v or V. Once selected
press B.
If you wish to record from AUDIO IN (L/R) andVIDEO
IN on the front or from the EURO SCART sockets on
the back of your unit, press INPUT to select for correct
display (AV1,AV2 or AV3).
If PLEASE CHECK is displayed, you have entered
incorrect and will need to re-enter the data.
Press 1 to switch your DVD+VCR Standby.
TIMER will appear in the display window while your
DVD+VCR waits to make the recording.
4
To watch a DVD during timer recording standby mode,
press POWER and DVD to switch to DVD mode.
Notes
G If at a later date you wish to delete or change any of
the settings in timer event memory you may do so
without having to enter all the timer event information
again. Simply display the timer event screen. Use v or V
to select the event that you wish to delete or change.
PR
PR-01
- -
- -
- -
- -
- -
- -
DATE
- -
- -
- -
- -
- -
- -
- -
T I M E
- -: - -~ - -: - -
- -: - -~ - -: - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
SP
SP
SP
SP
SP
SP
SP
i
Press b to delete the event...or
Press OK to change; then press b or B to select; Station,
Date, Start and End times and LP. Press v or V to enter
the correct information.
Press the numbered buttons to enter the date of the
5 programme.
If you press OK before entering the date you may select
G IfTimer record events Overlap...
one of the following automated recording features. Use
1 or 2 to select, then press OK to confirm.
DLY To record every day (except Saturday and Sunday)
at the same time.
Make sure that the preset times of the timer recording
events do not overlap. If they do, the earlier programme
will always be given priority.
SU ~ SA To record at the same time every week.
Example:
Programme 1 is programmed to start at 16:00 and end at
17:00.
PR
PR-01
- -
- -
- -
- -
- -
- -
DATE
T
I
M
E
- -: - -~ - -: - -
16
- -
- -
- -
- -
- -
- -
SP
- -: - -~ - -: - - SP
- -: - -~- - : - - SP
- -: - -~- - : - - SP
- -: - -~- - : - - SP
- -: - -~- - : - - SP
- -: - -~- - : - - SP
Programme 2 is programmed to start at 16:30 and end at
17:30.
(In this case, Programme 1 will be recorded in its entirety,
but only the last 30 minutes of Programme 2 will be
recorded.)
DLY SU MO TU WE TH FR SA
OK
i
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DVD andVideo CD
General Features
Playing a DVD andVideo CD
DVD VCD2.0 VCD1.1
Playback Setup
Note
G Turn on the TV and select the video input source
connected to the DVD player.
G Audio system:Turn on the audio system
and select the input source connected to the DVD player.
Unless stated otherwise, all operations described use the
remote control. Some features may also be available on
the Setup menu.
1 /3
DVD
Moving to anotherTITLE
Press OPEN/CLOSE to open the disc tray.
When a disc has more than one title, you can move to
another title as follows:
1
G Press DISPLAY, then press the appropriate numbered
button (0-9) to select a title number.
Load your chosen disc in the tray, with the
2 playback side down.
When a double-sided DVD is inserted, make sure the
side you want to play is facing down.
Moving to another CHAPTER/TRACK
1 /12
1 /3
VCD1.1
DVD
Press OPEN/CLOSE to close the tray.
3 READING appears on the TV screen, and playback starts
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to another
chapter/track as follows:
automatically. If playback does not start, press PLAY N.
In some cases, the disc menu might appear instead.
G Press . or > briefly during playback to select the
next chapter/track or to return to the
beginning of the current chapter/track.
G Press . twice briefly to step back to the
previous chapter/track.
G To go directly to any chapter during DVD playback, press
If a menu screen is displayed
The menu screen may be displayed first after loading a DVD
orVideo CD which offer a menu.
DVD
Use the b B v V buttons to select the title/chapter you
want to view, then press OK to start playback.
Press TITLE or DISC MENU to return to the menu
screen.
DISPLAY.Then, press 3/4to select chapter/track icon.
Then, enter the chapter/track number using the numbered
buttons (0-9).
Note
VCD2.0
For two-digit numbers, press the numbered buttons
(0-9) in rapid succession.
G Use the number buttons to select the track you want to
view.
Press RETURN to return to the menu screen.
G Menu setting and the exact operating procedures for using
the menu may differ depending on the disc. Follow the
instructions on the each menu screen.
DVD VCD2.0 VCD1.1
Search
1 Press . or > for about two seconds during
playback.
You also may set PBC to Off under setup. See page 19.
The player will now go into SEARCH mode.
2 Press . or > repeatedly to select the required
speed:
mX2, mX4, mX16, mX100 (backward) or MX2,
MX4, MX16, MX100 (forward).
With aVideo CD, the Search speed changes:
mX2, mX4, mX8 (backward) or MX2, MX4,
MX8 (forward).
Notes
– If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must be
entered and/or the disc must be authorized (see “Parental
Control”, on page 20).
– DVDs may have a region code.
Your player will not play discs that have a region code
different from your player.The region code for this player
is 2 (two).
– To watch a DVD during timer recording standby mode,
press POWER and DVD to switch to DVD mode.
3 To return to playback, press PLAY N.
Still Picture and Frame-by-frame playback
DVD VCD2.0 VCD1.1
1 Press PAUSE/STEP during playback.
The player will now go into PAUSE mode.
2 You can advance the picture frame-by-frame by pressing
PAUSE/STEP repeatedly on the remote control.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DVD andVideo CD
General Features (continued)
DVD VCD2.0 VCD1.1
Repeat A-B
A
*
A
B
OFF
DVD VCD2.0 VCD1.1
Slow Motion
1 Press . or > during still mode.
The player will enter SLOW mode.
To repeat a sequence in a title:
1 Press REPEAT A-B at your chosen starting point.
2 Press . or > repeatedly to select the required
speed : t 1/16, t 1/8, t 1/4 or t 1/2 (backward) or
T 1/16, T 1/8, T 1/4 or T 1/2 (forward).
A
appears briefly on the TV screen.
*
2 Press REPEAT A-B again at your chosen end point.
A B appears briefly on the TV screen, and the repeat sequence
3 To exit slow motion mode, press PLAY N.
begins (“A
B” appears the display window).
3 To cancel the sequence, press REPEAT A-B.
Note
G Slow motion playback in reverse is not applicable for
Video CD.
0:20:09
-:--:--
DVD
Time Search
The Time Search function allows you to start playing at
any chosen time on the disc.
1 Press DISPLAY during playback.The on-screen display
Karaoke DVD
VCD2.0 VCD1.1
Shuffle
1 Press SHUFFLE during playback or in stop mode.
The unit automatically begins Random Playback and
“RANDOM” appears on the TV screen.
appears on the screen.
The Time Search box shows the elapsed playing time of the
current disc.
2 To return to normal playback, press SHUFFLE again until
“NORMAL” appears on the TV screen.
2 Within 10 seconds, press
3/4to select the Time Search
icon in the on-screen display.
The “-:--:--” appears in the Time Search box.
Tips
3 Within 10 seconds, use the number buttons to enter the
required start time. Enter hours, minutes, and seconds
from left to right in the box.
By pressing > during Random playback, the unit selects
another title (track) and resumes Random playback.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered.Then enter the correct numbers.
Note
G This function only works with DVD karaoke discs and
4 Within 10 seconds, press OK to confirm the start time.
Playback starts from the selected time on the disc. If you enter an
invalid time, playback will continue from the current point.
video CD without PBC.
G On aVideo CD with PBC, you must set PBC to Off on
the setup menu to use the Random function. See page 19.
DVD VCD2.0 VCD1.1
3D Surround
DVD VCD2.0 VCD1.1
Repeat
NORM.
3D SUR
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or more
speakers normally required to listen to
TITLE
TRACK
CHAPT
ALL
OFF
DVDVideo Discs - Repeat Chapter/Title/Off
1 To repeat the currently playing chapter, press REPEAT.
The Repeat Chapter icon appears on the TV screen.
multi-channel audio from a home theater system.
2 To repeat the title currently playing, press REPEAT a
second time.
The Repeat Title icon appears on the TV screen.
1 Press DISPLAY during playback.
2 Use v/V to select the sound icon.
The sound option will be highlighted.
3 To exit Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the TV screen.
3 Use b/B to select “NORM.”, or “3D SUR”.
Video CDs - RepeatTrack/All/Off
1 To repeat the track currently playing, press REPEAT.
The Repeat Track icon appears on the TV screen.
Screen Saver
A screen saver image appears when you leave the DVD
Player in stop mode for about fifteen minutes.
2 To repeat the disc currently playing, press REPEAT a
second time.
The Repeat All icon appears on the TV screen.
3 To exit Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the TV screen.
Note
On aVideo CD with PBC, you must set PBC to Off on
the setup menu to use the Repeat function. See page 19.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DVD andVideo CD
DVD
General Features (continued)
Special DVD Features
DVD VCD2.0 VCD1.1
Zoom
Checking the contents of DVDVideo discs: Menus
DVDs may offer menus that allow you to access special
features.To use the disc menu, press DISC MENU.
Then, press the appropriate number button to select an
option. Or, use the b/B/v/V buttons to highlight your
selection, then press OK.
The Zoom function allows you to enlarge the video image
and to move through the enlarged image.
1 Press ZOOM during playback or still playback to
activate the Zoom function.
If you press ZOOM repeatedly, the magnification level increase
up to six steps
2 Use the b B v V buttons to move through the zoomed
picture.
3 Press CLEAR to resume normal playback or return to the
paused image.
DVD
Title Menu
1 Press TITLE.
If the current title has a menu, the menu will appear on the
screen. Otherwise, the disc menu may appear.
Note
2 The menu can list camera angles, spoken language and
subtitle options, and chapters for the title.
G The zoom function may not work for some DVDs.
3 To remove the title menu, press TITLE again.
DVD VCD2.0 VCD1.1
Marker Search
DVD
Disc Menu
MARKER SEARCH
1/9
1 Press DISC MENU.
You can start playback from a memorized point. Up to
nine points can be memorized.
To enter a mark, follow these steps.
The disc menu is displayed.
2 To remove the disc menu, press DISC MENU again.
1 During disc playback, press MARKER when playback
reaches the spot that you want to memorize.
The Marker icon will appear on the TV screen briefly.
1 /1
DVD
Camera Angle
If the disc contains sequences recorded from different
camera angles, the angle icon blinks on the TV screen.You
can then change the camera angle if you wish.
G Press ANGLE repeatedly during playback to select a
desired angle.
2 Repeat step 1 to enter up to nine Marker points on a disc.
To Recall a Marked Scene
1 During disc playback, press SEARCH.
The MARKER SEARCH menu will appear on the screen.
The number of the current angle appears on the display.
2 Within 10 seconds, press b/B to select a Marker number
that you want to recall.
3 Press OK.
Playback will start from the Marked scene.
1 ENG
D
5.1 CH
DVD
Changing the Audio Language
Press AUDIO repeatedly during playback to hear a
different audio language or audio track.
4 To remove the MARKER SEARCH menu, press SEARCH.
VCD2.0 VCD1.1
Changing the Audio Channel
To clear a Marked Scene
1 During disc playback, press SEARCH.
The MARKER SEARCH menu will appear on the screen.
Press AUDIO repeatedly during playback to hear a
different audio channel (STER., LEFT or RIGHT).
2 Within 10 seconds, press b/B to select a Marker number
that you want to erase.
ABC
1 ENG
DVD
Subtitles
3 Press CLEAR.
Press SUBTITLE repeatedly during playback to see the
different subtitle languages.
The Marker number will be erased from the list.
4 Repeat steps 2 and 3 to erase additional Marker numbers.
5 To remove the MARKER SEARCH menu, press SEARCH.
Note
If
appears, the feature is not available on the disc.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with Audio and MP3 Disc
Playing an Audio CD and MP3
Disc
Notes on MP3 Recordings
About MP3
G An MP3 file is audio data compressed by using the
MPEG1 audio layer-3 file-coding scheme.We call files that
have the “.mp3” file extension “MP3 files”.
G The player cannot read an MP3 file that has a file
extension other than “.mp3”.
CD
MP3
The DVD Player can play MP3 formatted recordings on
CD-ROM, CD-R or CD-RW discs.
Before playing MP3 recordings, read the notes on MP3
Recordings on right.
MP3 Disc compatibility with this player is limited
as follows:
1 Sampling Frequency / only at 44.1kHz
Insert a disc and close the tray.
Audio CD; Audio CD menu appears on the TV screen
go to step 4.
MP3 disc; The MP3-JPEG choice menu appears on the
TV screen. Go to step 2
1
2 Bit rate / within 32 - 320kbps
3 CD-R physical format should be “ISO 9660”
4 If you record MP3 files using the software which cannot
create a FILE SYSTEM, for example “Direct-CD” etc., it is
impossible to playback MP3 files.We recommend that you
use “Easy-CD Creator”, which creates an ISO9660 file
system.
5 A single session disc requires MP3 files in the first track. If
there is no MP3 file in the 1st track, it cannot playback
MP3 files. If you wish to playback MP3 files, format all the
data in the disc or use a new one.
6 File names should be named using 8 letters or less and
must incorporate “.mp3” extension e.g.“********.MP3”.
7 Do not use special letters such as “/ : * ? “ < > ” etc.
8 Total number of files on the disc should be less than 650.
MP3
JPEG
Use v/V to select the MP3 then press OK.
The MP3 menu appears on the TV screen.
Press RETURN to move to the MP3 -JPEG choice menu.
2
Program
MP3
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Folder8
Clear All
OFF
00:00
Use v/V to select a folder then press OK.
3 A list of files in the folder appears.
This DVD player requires discs/recordings to meet
certain technical standards in order to achieve optimal
playback quality. Pre-recorded DVDs are automatically set
to these standards.There are many different types of
recordable disc formats (including CD-R containing MP3
files).That require certain pre-existing conditions (see
above) to insure compatible playback.
Use v/V to select a track then press PLAY N
4
or OK.
Playback starts.
During playback, the current track’s elapsed playing time
will appear on the display window and menu.
Playback will stop at the end of the disc.
Press TITLE to move to the next page.
Press DISC MENU to move to the previous page.
Customers should also note that permission is
required in order to download MP3 files and music
from the Internet. Our company has no right to
grant such permission. Permission should always
be sought from the copyright owner.
Program
MP3
Program
CD
TRACK01
TRACK 1.mp3
TRACK02
TRACK03
TRACK04
TRACK05
TRACK06
TRACK07
TRACK08
TRACK 2.mp3
TRACK 3.mp3
TRACK 4.mp3
TRACK 5.mp3
TRACK 6.mp3
TRACK 7.mp3
TRACK 8.mp3
Clear All
OFF
Clear All
NORM.
00:00
1
0: 56: 18
STER.
Audio CD menu
Tip
MP3 menu
If you are in a file list and want to return to the Folder
list, use the v/V to highlight
and press OK to return
to the previous menu screen.
To stop playback at any other time, press
5 STOP x.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with Audio and MP3 Disc (Continued)
CD
MP3
CD
Pause
Repeat A-B
To repeat a sequence.
1 During disc playback, press REPEAT A-B at your chosen
starting point.
The Repeat icon and “
1 Press PAUSE/STEP during playback.
2 To return to playback, press PLAY N or press
PAUSE/STEP again.
” appears on the menu screen.
A
*
CD
G Press . or > briefly during
playback to go to the next track or to return to the
beginning of the current track.
G Press . twice briefly to step back to the
previous track.
MP3
2 Press REPEAT A-B again at your chosen end point.
The Repeat icon and “A B” appears on the menu screen, and the
sequence begins to play repeatedly.
Moving to anotherTrack
3 To exit the sequence and return to normal play, press
REPEAT A-B again.
The Repeat icon and “OFF” appears on the menu screen.
G In case of audio CD, to go directly to any track, enter the
track number using the numbered buttons (0-9) during
playback.
CD
3D Surround
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or more
speakers normally required to listen to multi-
channel audio from a home theater system.
1 Press DISPLAY or AUDIO during playback.
2 Use b/B to select the sound icon.
The sound option will be highlighted.
CD
MP3
RepeatTrack/All/Off
1 To repeat the track currently playing, press REPEAT.
The Repeat icon and “TRACK” appears on the menu screen.
2 To repeat all tracks on a disc, press REPEAT a second
time.
The Repeat icon and “ALL” appears on the menu screen.
3 To cancel Repeat mode, press REPEAT a third time.
3 Use v/V to select “NORM.”, or “3D SUR”.
The Repeat icon and “OFF” appears on the menu screen.
CD
Changing the Audio Channel
CD
MP3
Press AUDIO repeatedly during playback to hear a
different audio channel (STER., LEFT, or RIGHT).
Search
1 Press m or M during playback.
The player will now go into SEARCH mode.
2 Press m or M repeatedly to select the required speed:
mX2, mX4, mX8 (backward) or MX2, MX4,
MX8 (forward).
Search speed and direction are indicated on the menu screen.
3 To exit SEARCH mode, press PLAY N.
CD
MP3
Shuffle
1 Press SHUFFLE during playback or when playback is
stopped.
The unit automatically begins Random Playback and
“RAND.” appears on the menu screen.
2 To return to normal playback, press SHUFFLE.
“RAND.” disappears on the menu screen.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with JPEG Disc
Moving to another File
Press . or > once during viewing a picture to
JPEG
Viewing a JPEG disc
This DVD+VCR can play discs with JPEG files and Kodak
picture CD. Before playing JPEG recordings, read the notes
on JPEG Recordings on right.
advance to the next file or to the previous file.
Still Picture
1 Press PAUSE/STEP during slide show.
The player will now go into PAUSE mode.
2 To return to the slide show, press PLAY N or press
PAUSE/STEP again.
Insert a disc and close the tray.
The MP3-JPEG choice menu appears on the TV screen.
1
MP3
JPEG
To flip the picture
Use v/V to select the JPEG then press OK.
Press v/V during showing a picture to flip the
2 The JPEG menu appears on the TV screen.
picture horizontally or a vertically.
JPEG
To rotate picture
Press b/B during showing a picture to rotate the
picture clockwise or counter clockwise.
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Folder8
Notes on JPEG Recordings
Off
Slide Speed
G Depending upon the size and number of the JPEG files, it
could take a long time for the DVD+VCR to read the
disc’s contents. If you don’t see an on-screen display after
several minutes, some of the files are too big — reduce
the resolution of the JPEG files to less than 2 mega pixels
and burn another disc.
Use v/V to select a folder then press OK.
3 A list of files in the folder appears.
Press RETURN to move to the MP3-JPEG choice menu.
Tip
If you are in a file list and want to return to the Folder
G Total number of files and folders on the disc should be less
than 650.
list, use the v/V buttons on the remote to highlight “
and press OK to return to the previous menu screen.
”
G Some disc may be incompatible due to different recording
format or condition of disc.
If you want to view a particular file, press v/V to
G When you are using software such as “Easy CD Creator”
to burn the jpeg files into the CD-R, ensure that all the
selected files have the “.jpg” extensions when copying into
the CD layout.
4 highlight a file and press OK or PLAY N.
Viewing the file proceeding starts.
During viewing a file, press RETURN to move to the
previous menu (JPEG menu).
Press TITLE to move to the next page.
Press DISC MENU to move to the previous page.
G If the files have “.jpe” or “.jpeg” extensions, please rename
them as “.jpg” files.
G File names without “.jpg” extension will not be able to be
read by this DVD+VCR. Even though the files are shown
as JPEG image files in windows explorer.
Folder1
JPEG
Picture1.jpg
Picture2.jpg
Picture3.jpg
Picture4.jpg
Picture5.jpg
Picture6.jpg
Picture7.jpg
5/32
1024X768 Picture5.jpg
Off
5/32
1024X768
Slide Speed
Tip
There are three viewing Slide Speed options: Fast, Normal,
Slow, and Off. Press 1/2 to highlight the Slide Speed then
press 3/4 to select the option you want to use, and
press OK.
To stop viewing at any other time, press STOP.
5 The JPEG menu appears.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
CD
MP3
VCD2.0 VCD1.1
Programmed Playback
Programmed Playback with Audio Programmed Playback withVideo
CD and MP3 Disc
CD
The Program function enables you to store your favorite
tracks from any disc in the player memory.
Program can contain 30 tracks.
Note
On aVideo CD with PBC, you must set PBC to Off on the
setup menu to use the Program function. See page 19.
Press PROGRAM during playback or in the stop
mode to enter the Program Edit mode.
InsertVideo CD and close the tray.
1
1
E
The
mark will appear to the right of the word Program on
the right side of the menu screen.
Press PROGRAM while playback is stopped.
TheVCD Program menu will appear.
2
Note
Program
E
VCD
E
Press PROGRAM to exit the Program Edit mode; the
mark will disappear.
TRACK 1
TRACK 2
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
TRACK 8
Select a track, then press OK to place the
Clear All
2 selected track on the Program list.
Repeat step 2 to place additional tracks on the
3 Program list.
Note
Press RETURN or PROGRAM to exit the Program menu.
E
Program
E
Program
MP3
CD
TRACK 1
TRACK 12
TRACK 8
TRACK 10
TRACK 3
TRACK 8.mp3
TRACK 2.mp3
TRACK 4.mp3
TRACK 3.mp3
TRACK 1.mp3
TRACK 2
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
TRACK 8
TRACK 2.mp3
TRACK 3.mp3
TRACK 4.mp3
TRACK 5.mp3
TRACK 6.mp3
TRACK 7.mp3
TRACK 8.mp3
Follow steps 2-6 of “Programmed Playback with
3 Audio CD and MP3 disc” on left.
Clear All
OFF
Clear All
NORM.
To resume normal playback from
0: 56: 18
STER.
00:00
3
4
programmed playback, press PROGRAM.
“NORMAL” appears on the TV screen.
Audio CD menu
MP3 menu
Repeat ProgrammedTracks
Press B.
G To repeat the track currently playing, press REPEAT.
The Repeat icon and “TRACK” appears on the menu screen.
G To repeat all tracks on the program list, press REPEAT a
second time.
The Repeat icon and “ALL” appears on the menu screen.
G To cancel Repeat mode, press REPEAT a third time.
The Repeat icon and “OFF” appears on the menu screen.
The programmed track you selected last is highlighted on the
program list.
4
Use v/V to select the track you want to start
5 playing.
Press TITLE to move to the next page.
Press DISC MENU to move to the previous page.
Press PLAY N to start.
Erasing aTrack from Program List
1 Press PROGRAM during playback (Audio CD and MP3
disc only) or in the stop mode to enter the Program Edit
mode.
Playback begins in the order in which you programmed the
tracks and “PROG.” appears on the menu screen.
Playback stops after all of the tracks on the Program list have
played once.
6
7
E
The
mark will appear.
To resume normal playback from programmed
2 Press 2 to move to the Program list.
3 Use 3/4to select the track that you wish to erase from
the Program list.
4 Press CLEAR.
The track will be erased from the Program list.
E
playback, press program to disappear the
mark and then select a track of CD (or MP3) list
and then press OK.
“PROG.” disappears on the menu screen.
Erasing the Complete Program List
1 Follow steps 1-2 of “Erasing a Track from Program List” as
above.
2 Use 3/4to select “Clear All”, then press OK.
The complete Program for the disc will be erased.
The programs are also cleared when the disc is removed.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Operation
On Screen Display
You may easily display the current time or tape counter,
amount of tape left, day, month, year, day of week,
programme channel, tape speed and operational mode of
yourVCR on the TV screen. If a recording is taking place
these On Screen Displays will not be recorded onto the
tape.
Video Doctor (Self-Diagnosis)
This feature informs you that there is a problem with your
VCR.These error messages will appear on the TV screen.
Press SYSTEM MENU.
1
Press 1or 2to select Dr.
Press OK.
Press DISPLAY to display.
1
Press DISPLAY repeatedly to cycle through the
display options.The tape counter and amount of tape
left will appear if there is a tape loaded.
VCR
VCR
1
2
A B
Pr-12
C
P
TIME SYS-
DATE
SET
REC
R
ACMS
OSD Dr.
NIC
Dr.
TEM
+
-
f
OSD
After 3 seconds the majority of the On Screen Displays
2 will clear leaving only the clock or tape counter and the
amount of tape left on the screen.
ON
16:9 DECO-
DER
OK
i
AUDIO OFF 4:3
OPR
VCR
Press DISPLAY again to remove all displays from the
TV screen.
VIDEO DOCTOR
Dr.
HEAD STATUS
TAPE STATUS
NO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME
Tape Counter Memory Stop
OK
i
The DigitalTape Counter can be displayed on the
display window instead of the time by pressing DISPLAY
on the remote control.The Digital Tape Counter indicates
the relative positions of recordings on the tape.
Press 3or 4to check a problem.
2 HEAD STATUS
O PLEASE CLEAN:
Clean your video heads.
Press DISPLAY.
Press CLEAR to set the counter to 0:00:00.
Press PLAY N or start recording.
The tape counter will display the actual play time in
hours, minutes and seconds.
TAPE STATUS
O NOT RECORDABLE:
Insert a tape with its protection tab in place
1
NO. OFTIMER PROGRAMME
O 2
Shows the number of timer recording.
Press STOP x when playback or recording is
2 complete.
Press ..
NEXTTIMER PROGRAMME
O PR-01 26 10:00~11:00 SP
Shows the current status of timer recording.
The tape will rewind and automatically stop when the
counter returns to 0:00:00.
Press SYSTEM MENU.
Child Lock
The control buttons on the front of theVCR can be
switched off so that yourVCR can only be operated using
the remote control.
Press C.LOCK.
1
will appear in the display window.
None of the buttons on the front of yourVCR will
work (except EJECT).
If any buttons on the front of your unit are pressed
will flicker in the display window for a few seconds.
Press C.LOCK again to switch off the child lock.
2
will disappear in the display window.
Note
– C.LOCK is not available on the DVD mode.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Operation (Continued)
Press D or E repeatedly to select: AUTO, 4:3 or 16:9.
Hi-Fi Stereo Sound System
2 AUTO:
YourVCR will record and playback Hi-Fi stereo sound. In
addition it has a stereo NICAM digital stereo sound
decoder.This allows you to record and playback the sound
in several different ways.Video cassettes recorded on your
VCR will have a normal mono audio track and twoVHS
Hi-Fi stereo audio tracks.These stereo tracks allow you to
make audio recordings in Hi-Fi stereo or bilingual mode
from a TV broadcast, stereo audio system, video disc or
another Hi-FiVCR.
Automatically plays back Wide-Screen
programmes as Wide-Screen and Normal
programmes as normal.
4:3
Only for playing back and recording Normal format
recordings (4:3).
16:9:
Only for playing back and recording Wide-Screen format
recordings (16:9).
YourVCR’s NICAM digital sound decoder allows you to
1
enjoy broadcasts with NICAM sound, as well as standard
stereo, bilingual and mono sound.The particular type of
sound received or that recorded will be briefly displayed
on the TV screen for a couple of seconds:
STEREO NICAM
VCR
1
2
A B
C
Pr-12
P
TIME
SET
REC
AUDIO
ACMS
AUTO Dr.
R
DATE
16:9
4:3
+
-
f
4:3
16:9
OSD
ON
16:9 DECO-
DER
i
OFF 4:3
Sound is automatically recorded on the Hi-Fi stereo and
mono tracks of the video tape.
BIL NICAM
Both audio channels will be recorded on the Hi-Fi stereo
tracks.The primary language channel (left) will be
recorded on the mono track of the video tape.
MONO
Press SYSTEM MENU to remove the menus from the
3 TV screen.
To enjoy Wide-Screen playback you must connect your
VCR to the TV using a SCART cable.
To set the decoder
The sound is recorded on the Hi-Fi tracks and the mono
track of the video tape without any separation.
Press SYSTEM MENU. Press F or G to select
2 AUDIO.
We have already described, how to connect a decoder for
pay-TV station as CANAL+ or PREMIERE on page 10. For
the recording of an encoded station you do not have to
control anything.You just select the station and wait
shortly until the decoding will start.
Press D or E to select STEREO, LEFT, RIGHT and
3 MONO.
In BIL NICAM playback the primary language is output
on the left channel and the secondary channel is output
simultaneously from the right channel when audio
output is set to STEREO.The primary language will be
output from both channels when the audio setting is
MONO.
Press SYSTEM MENU.
The main menu will appear on the TV screen.
Press F or G to select the DECODER.
Press OK.
1
Please note that when adjusting the tracking control Hi-
Fi stereo sound may revert to MONO.
Press D or E to select.
2 ON: When the decoder is connected to the AV2 socket.
OFF:When anotherVCR is connected to the AV2
socket.
Wide Screen Compatibility 16:9
Press SYSTEM MENU to return to a TV picture.
YourVCR can record and play back wide screen aspect
ratio programmes (16:9).To record a wide screen format
programme successfully the correct type of wide screen
signal must be broadcast by the TV station.
CD
DVD
VCD1.1
Last Condition Memory
This player memorizes the last condition for the last disc
you have watched. Settings remain in memory even if you
remove the disc from the player or switch off the player. If
you load a disc that has its settings memorized, the latest
stop position is automatically recalled.
Switch on yourVCR.
Press SYSTEM MENU.
Press F or G to select 16:9/4:3.
1
Press OK.
Notes
– Settings are stored in memory for use any time.
– This player does not memorize settings of a disc if you
switch off the player before commencing to play it.
VCR
1
2
A B
C
VCR
1
2
A B
C
Pr-12
Pr-12
SYS-
P
TIME
P
TIME
SET
SYS-
TEM
REC
ACMS
Dr.
SET
R
DATE
AUTO
4:3
REC
AUDIO
ACMS
OSD
R
Dr.
DATE
16:9
4:3
16:9
4:3
+
-
f
+
-
NIC
OSD
f
OSD
ON
16:9 DECO-
DER
ON
16:9 DECO-
DER
16:9
i
AUDIO OFF 4:3
OK
i
OFF 4:3
OPR
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Recording
Copying from DVDToVCR
This unit allows you to copy the contents of a DVD to a
VHS tape with a press of the DIRECT DUBBING button.
Recording from another video
recorder
With this video recorder you can make recordings from
an external source, such as copying from another video
recorder or a camcorder.
Note
G If the DVD you are attempting to copy is copy
protected, you may not be able to copy the disc.
Note
Insert Disc
In the following description, this video recorder will be
one used for recording and will be referred to asVCR B.
The other appliance will be used for playback and will be
referred to asVCR A.
1
Insert the disc you wish to copy in the DVD deck and
close the disc tray.
InsertVHSTape
2 Insert a blankVHS videotape into theVCR deck.
VCR A should be connected to the SCART socket on
the rear panel of your unit or the AV sockets on the
front panel of your unit.
1
Copy the DVD toVHSTape
3 Press the DIRECT DUBBING button on the unit front
panel.
Insert the recorded tape intoVCR A and a blank tape
G The DVD will go into Play mode and theVCR will go
into Record mode.
2 intoVCR B.
G If the DVD disc menu appears, you may need to press
the Play button manually to begin copying.
Stop the Copy Process.
To start recording, press the RECORD onVCR B and
3 PLAY N onVCR A.
4 When the DVD is finished playing, press the STOP
button twice within 5 seconds to end the copy.
G You must stop the Copy process manually when the
DVD movie ends, or the unit may replay and record
over and over again.
When you want to finish copying,
4 press the STOP x on both video recorders.
Press STOP twice within 5 seconds.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Cause
Correction
Symptom
G DVD orVCR button is not switched
properly.
G Refer to page 6.
DVD orVCR do not
work properly.
No power.
G The power cord is disconnected.
G Plug the power cord into the wall outlet
securely.
The power is on, but the
DVD player does not
work.
G No disc is inserted.
G Insert a disc. (Check that the DVD or, audio
CD indicator in the display window is lit.)
G The TV is not set to receive DVD signal
output.
G Select the appropriate video input mode on
the TV so the picture from the DVD player
appears on the TV screen.
No picture.
G The video cable is not connected securely.
G Connect the video cable into the jacks
securely.
G The equipment connected with the audio
cable is not set to receive DVD signal
output.
G Select the correct input mode of the audio
receiver so you can listen to the sound from
the DVD player.
No sound.
G The audio cables are not connected
G Connect the audio cable into the jacks
securely.
securely.
G The power of the equipment connected
G Turn on the equipment connected with the
with the audio cable is turned off.
audio cable.
G The Digital Audio Output is set to the
wrong position.
G Set the Digital Audio Output to the
correct position, then turn on the DVD
player again by pressing POWER.
G The disc is dirty.
G Clean the disc.
The picture is poor.
G The TV channels are not tuned in properly. G Check tuning, carry out tuning again.
G An unplayable disc is inserted.
G Insert a playable disc. (Check the disc type
and Regional code.)
G Place the disc with the playback side down.
The DVD player does not
start playback.
G The disc is placed upside down.
G The disc is not placed within the guide.
G Place the disc on the disc tray correctly inside
the guide.
G The disc is dirty.
G Clean the disc.
G The Rating level is set.
G Cancel the Rating function or change the
rating level.
G There is an obstacle in the path of the
remote control and this unit.
G Remove the obstacle.
The remote control does
not work properly.
G The batteries in the remote control are
G Replace the batteries with new ones.
exhausted.
Video tape cannot be
inserted.
G Is the cassette compartment empty?
G Eject the tape in.
G Switch ‘AUDIO’ in the main menu to
‘STEREO’.
G Audio mode is not set properly.
No Hi-Fi sound
Video Head Cleaning
Dirt accumulating on the head after a long period of time can cause the playback picture to become blurred or broken up.
High quality video cassette tapes will not normally deposit dirt onto the video head, but old or damaged tapes might. Clean
the video heads with a commercially available video heads cleaning tape.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code List
Enter the appropriate code number for the initial settings “Disc Audio”,“Disc Subtitle” and/or “Disc Menu”
(See page 18).
Code Language
Code Language
Code Language
Code Language
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Abkhazian
Afar
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Fiji
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
Lingala
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Finnish
Lithuanian
Macedonian
Malagasy
Malay
Afrikaans
Albanian
Ameharic
Arabic
French
Frisian
Galician
Georgian
German
Greek
Malayalam
Maltese
Armenian
Assamese
Aymara
Maori
Greenlandic
Guarani
Gujarati
Hausa
Marathi
Azerbaijani
Bashkir
Moldavian
Mongolian
Nauru
Tamil
Basque
Tatar
Bengali; Bangla
Bhutani
Hebrew
Hindi
Nepali
Telugu
Thai
Norwegian
Oriya
Bihari
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Tibetan
Tigrinya
Tonga
Breton
Panjabi
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Pashto, Pushto
Persian
Turkish
Turkmen
Twi
Polish
Italian
Portuguese
Quechua
Rhaeto-Romance
Rumanian
Russian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Ukrainian
Urdu
Chinese
Corsican
Croatian
Czech
Uzbek
Vietnamese
Volapük
Welsh
Samoan
Danish
Sanskrit
Dutch
Korean
Kurdish
Laothian
Latin
Scots Gaelic
Serbian
Wolof
English
Xhosa
Yiddish
Yoruba
Zulu
Esperanto
Estonian
Faroese
Serbo-Croatian
Shona
Latvian, Lettish
Sindhi
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Country/Area Code List
Enter the appropriate code number for the initial setting “Area Code” (See page 20).
Code Country/Area
Code Country/Area
Code Country/Area
Code Country/Area
AD
AE
AF
AG
AI
Andorra
ER
ES
ET
FI
Eritrea
Spain
Ethiopia
Finland
LC
LI
LK
LR
LS
LT
LU
LV
Saint Lucia
Liechtenstein
Sri Lanka
Liberia
Lesotho
Lithuania
Luxembourg
Latvia
Libya
Morocco
SC
SD
SE
SG
SH
SI
Seychelles
Sudan
Sweden
Singapore
Saint Helena
Slovenia
Svalbard and Jan Mayen
Islands
Slovak Republic
Sierra Leone
San Marino
Senegal
Somalia
Suriname
Saint Tome and Principe
Former USSR
El Salvador
Syria
Swaziland
Turks and Caicos Islands
Chad
French Southern Territories
Togo
Thailand
Tadjikistan
Tokelau
Turkmenistan
Tunisia
Tonga
East Timor
Turkey
Trinidad and Tobago
Tuvalu
Taiwan
Tanzania
United Arab Emirates
Afghanistan
Antigua and Barbuda
Anguilla
Albania
Armenia
Netherlands Antilles
Angola
Antarctica
Argentina
American Samoa
Austria
Australia
FJ
Fiji
AL
FK
FM
FO
FR
FX
Falkland Islands
Micronesia
Faroe Islands
France
France (European
Territory)
Gabon
Great Britain
Grenada
Georgia
French Guyana
Ghana
Gibraltar
Greenland
Gambia
AM
AN
AO
AQ
AR
AS
AT
AU
AW
AZ
BA
BB
BD
BE
BF
BG
BH
BI
SJ
LY
SK
SL
SM
SN
SO
SR
ST
SU
SV
SY
SZ
TC
TD
TF
TG
TH
TJ
TK
TM
TN
TO
TP
TR
TT
TV
TW
TZ
UA
UG
UK
UM
US
UY
UZ
VA
VC
VE
MA
MC
MD
MG
MH
MK
ML
MM
MN
MO
MP
MQ
MR
MS
MT
MU
MV
Monaco
Moldavia
GA
GB
GD
GE
GF
Madagascar
Marshall Islands
Macedonia
Mali
Myanmar
Mongolia
Aruba
Azerbaidjan
Bosnia-Herzegovina
Barbados
Bangladesh
Belgium
Burkina Faso
Bulgaria
Bahrain
Burundi
Benin
Bermuda
Brunei Darussalam
Bolivia
Brazil
Bahamas
Bhutan
Bouvet Island
Botswana
Belarus
Belize
Canada
Cocos (Keeling) Islands
Central African Republic
Congo
Switzerland
Ivory Coast
Cook Islands
Chile
Cameroon
China
Colombia
Costa Rica
Former Czechoslovakia
Cuba
CapeVerde
Christmas Island
Cyprus
Czech Republic
Germany
Djibouti
Denmark
Dominica
Dominican Republic
Algeria
Ecuador
Estonia
Egypt
Western Sahara
GH
GI
GL
GM
GN
GP
GQ
GR
GS
Macau
Northern Mariana Islands
Martinique (French)
Mauritania
Montserrat
Malta
Guinea
Guadeloupe (French)
Equatorial Guinea
Greece
S. Georgia & S. Sandwich Isls.
Guatemala
Guam (USA)
BJ
Mauritius
Maldives
BM
BN
BO
BR
BS
BT
BV
BW
BY
BZ
CA
CC
CF
CG
CH
CI
CK
CL
CM
CN
CO
CR
CS
CU
CV
CX
CY
CZ
DE
DJ
DK
DM
DO
DZ
EC
EE
GT
GU
MW Malawi
GW Guinea Bissau
MX
MY
MZ
NA
NC
NE
NF
NG
NI
NL
NO
NP
NR
NU
NZ
OM
PA
Mexico
Malaysia
Mozambique
Namibia
New Caledonia (French)
Niger
Norfolk Island
Nigeria
Nicaragua
Netherlands
Norway
Nepal
Nauru
Niue
New Zealand
Oman
Panama
Peru
Polynesia (French)
Papua New Guinea
Philippines
Pakistan
GY
HK
HM
HN
HR
HT
HU
ID
IE
IL
IN
IO
Guyana
Hong Kong
Heard and McDonald Islands
Honduras
Croatia
Haiti
Hungary
Indonesia
Ireland
Israel
Ukraine
Uganda
United Kingdom
USA Minor Outlying Islands
United States
Uruguay
Uzbekistan
Vatican City State
SaintVincent & Grenadines
Venezuela
Virgin Islands (British)
Virgin Islands (USA)
Vietnam
Vanuatu
Wallis and Futuna Islands
Samoa
India
British Indian Ocean
Territory
Iraq
Iran
Iceland
Italy
Jamaica
Jordan
Japan
IQ
IR
IS
IT
JM
PE
PF
PG
PH
PK
VG
VI
JO
JP
KE
KG
KH
KI
KM
KN
KP
KR
KW
KY
KZ
LA
LB
VN
VU
WF
WS
YE
YT
YU
ZA
ZM
ZR
ZW
Kenya
Kyrgyzstan
Cambodia6
Kiribati
Comoros
Saint Kitts & Nevis Anguilla
North Korea
South Korea
Kuwait
PL
Poland
PM
PN
PR
PT
PW
PY
QA
RE
RO
RU
RW
SA
Saint Pierre and Miquelon
Pitcairn Island
Puerto Rico
Portugal
Palau
Paraguay
Qatar
Reunion (French)
Romania
Russian Federation
Rwanda
Saudi Arabia
Solomon Islands
Yemen
Mayotte
Yugoslavia
South Africa
Zambia
Zaire
Zimbabwe
Cayman Islands
Kazakhstan
Laos
Lebanon
EG
EH
SB
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Specification
General
Power requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
AC 220-230V, 50Hz
23W
430 X 97.5 X 293 mm (w/h/d)
4.8 kg
Operating temperature
Operating humidity
Timer
5˚C to 35˚C (41˚F to 95˚F)
5 % to 90 %
24 hours display type
System
Laser
Video Head system
Signal system
Semiconductor laser, wavelength 650 nm
Double azimuth 6 heads, helical scanning.
PAL
Frequency response
DVD (PCM 96 kHz): 8 Hz to 44 kHz
DVD (PCM 48 kHz): 8 Hz to 22 kHz
CD: 8 Hz to 20 kHz
Signal-to-noise ratio
Harmonic distortion
Dynamic range
More than 100dB (ANALOG OUT connectors only)
Less than 0.008%
More than 100 dB (DVD)
More than 95 dB (CD)
Inputs (VCR)
Audio
-6.0dBm, more than 10 kohms (SCART)
-6.0dBm, more than 47 kohms (RCA)
1.0Vp-p, 75 ohms, unbalanced (SCART/RCA)
Video
Outputs (DVD)
Audio output (digital audio)
Audio output (analog audio)
Outputs (VCR)
0.5V (p-p), 75 Ω, RCA jack x 1
2.0Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 2
Audio
Video
-6.0dBm, less than 1 kohms (SCART)
1.0Vp-p, 75 ohms, unbalanced (SCART)
Design and specifications are subject to change without notice.
Manufactured under license from Dolby Laboratories.“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories. Confidential unpublished works. Copyright 1992-1997 Dolby Laboratories.All rights
reserved.
“DTS” and “DTS Digital Out” are trademarks of DigitalTheater Systems, Inc.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
|