H9231CD(EN).QX3 02.9.5 7:13 PM Page 1
DigitalVideo Disc Player &
Video Cassette Recorder
Owner’s Manual
DVD741VR
Important!
Return your
Warranty
Registration Card
within 10 days.
See why inside.
Read this manual first!
Congratulations on purchasing this Philips product.
We’ve included everything you need to get started.
If you have any problems, Philips Representatives can
help you get the most from your new product by explaining:
• Hookups,
• FirstTime Setup, and
• Feature Operation.
Do not attempt to return this product to the store.
For fast help, call us first!
1-800-531-0039
Thank you for making Philips a part of your home!
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 3
Safety and General Information 3
Safety Precautions
Warning: To prevent fire or shock hazard, do not expose this equipment to rain or
moisture.
Federal Communications Commission (FCC)Warning: Any unauthorized changes or
modifications to this equipment void the user’s authority to operate it.
Department of Health and Human Services (DHHS) Certification: Complies with
21 Center for Radiation (CFR) chapter 1 subchapter J applicable at time of manufacture.
Laser Safety: This unit employs a laser. Only a qualified service person should remove
the cover or attempt to service this device, due to possible eye injury.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCE-
DURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADI-
ATION EXPOSURE.
CAUTION:VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK
DEFEATED. DO NOT STARE INTO BEAM.THE BEAM IS LOCATED INSIDE, NEAR THE
DECK MECHANISM.
Special Information for Canadian Users: This Class B digital apparatus
complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
Radio/TV Interference: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits
are designed to provide reasonable protection against harmful interference in a residential
installation.This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and the receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
Copyright Protection: Unauthorized copying, broadcasting, public performance and
lending of Discs are prohibited.This product incorporates copyright protection technology
that is protected by method claims of certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision Corporation and is intended for
home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Note to the CableTV System Installer: This reminder is provided to call
the Cable TV system installer’s attention to Article 820-40 of the National Electrical Code,
which provides guidelines for proper grounding – in particular, specifying that the cable
ground shall be connected to the grounding system of the building, as close to the point of
cable entry as possible.
High Quality: ThisVCR of the DVD/VCR has a High Quality (HQ) system and is
compatible withVideo Home System (VHS) equipment.
Declaration of Conformity
Model Number:
Trade Name:
Responsible Party:
DVD741VR
Philips
Philips Consumer Electronics
P.O. Box 14810
Knoxville,TN 37914-1810
(865) 521-4316
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of
Dolby Laboratories. Copyright 2002 Philips Consumer Electronics. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 4
4 Table of Contents
General Information
Disc Playback Features
Safety and General Information . . . . . . . . . . . . . . . . .3 Disc Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Fast Forward/Reverse Search . . . . . . . . . . . . . . . . .49
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Specific Title/Chapter Playback,
Playable Discs andVideo Cassettes . . . . . . . . . . . . . .6 Specific Time Playback . . . . . . . . . . . . . . . . . . . . . . .50
Specific Track Playback . . . . . . . . . . . . . . . . . . . . . . .51
Initial DVD/VCR Setup
Paused and Step-by-Step Playback,
Hookups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-13 Resuming Playback . . . . . . . . . . . . . . . . . . . . . . . . . .52
Remote Control Setup . . . . . . . . . . . . . . . . . . . . . .14 Repeat,A-B Repeat . . . . . . . . . . . . . . . . . . . . . . . . .53
First-time DVD/VCR Setup . . . . . . . . . . . . . . . . . . .15 Markers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Subtitles, Camera Angles . . . . . . . . . . . . . . . . . . . . .55
Basic Playback
Parental Controls Password . . . . . . . . . . . . . . . . . .56
Video Cassette Playback . . . . . . . . . . . . . . . . . . . . .16 Parental Controls Levels . . . . . . . . . . . . . . . . . . . . .57
Disc Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Slow Motion, Zoom . . . . . . . . . . . . . . . . . . . . . . . .59
Basic DVD/VCR Controls
Programmed Playback . . . . . . . . . . . . . . . . . . . . . . .60
Display Panel (DVD) . . . . . . . . . . . . . . . . . . . . . . . .18 Random Playback, Stereo Sound Mode . . . . . . . . . .61
Display Panel (VCR) . . . . . . . . . . . . . . . . . . . . . . . .19 MP3 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 MP3 Display Information, MP3 Track Selection . . . .63
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Random MP3 Playback,
Remote Control Buttons . . . . . . . . . . . . . . . . . .22-23 Programmed MP3 Playback . . . . . . . . . . . . . . . . . . .64
AdditionalVCR Setup
DVD Player Setup Options
Channel Setup . . . . . . . . . . . . . . . . . . . . . . . . . .24-26 On-Screen Displays . . . . . . . . . . . . . . . . . . . . . . . . .65
Clock (VCR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . .66-67
Daylight-Savings Time . . . . . . . . . . . . . . . . . . . . . . . .28 Language Settings . . . . . . . . . . . . . . . . . . . . . . . .68-69
Language Selection (VCR) . . . . . . . . . . . . . . . . . . . .29 Audio Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
VCR On-Screen Status Displays . . . . . . . . . . . . . . .30 Black Level Settings,TruSurround Setting . . . . . . . .71
VCR Recording Options
InformationYou May Need
Video Cassette Recording . . . . . . . . . . . . . . . . . . . .31 Care and Maintenance/Specifications . . . . . . . . . . . .72
Recording One Channel/Watching Another . . . . . .32 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
One-Touch Recording . . . . . . . . . . . . . . . . . . . . . . .33 Helpful Hints . . . . . . . . . . . . . . . . . . . . . . . . . . .74-77
Timer Recording . . . . . . . . . . . . . . . . . . . . . . . .34-37 Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . .78-79
Rerecording (Tape Duplication) . . . . . . . . . . . . . . . .38 Information Index . . . . . . . . . . . . . . . . . . . . . . . . . .80
Video Cassette Playing Options
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Real-timeTape Counter Memory . . . . . . . . . . . . . .40
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Special Effects Playback . . . . . . . . . . . . . . . . . . . . . .42
Automatic Operation Features . . . . . . . . . . . . . . . .43
AdditionalVCR Features
Multi-ChannelTelevision Sound . . . . . . . . . . . . .44-45
Hi-Fi Stereo Sound . . . . . . . . . . . . . . . . . . . . . . . . .46
Blue Background . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 5
Introduction 5
Welcome!
This DVD/VCR combines a DigitalVideo Disc (DVD) Player and a Hi-FiVideo Cassette
Recorder (VCR) into one unit, letting you play DVDs,Audio Compact Discs (Audio
CDs), andVideo Cassettes on one piece of equipment.
Read this owner’s manual carefully to learn how to use the features listed below.
Features
VCR
• Automatic Channel Setup • 19 Micron head
• Searching:Time, Forward,
• Automatic Head Cleaner • Real-TimeTape Counter
and Reverse
• Daylight-SavingsTime
• Recording: One-Touch and • Slow Motion
•
English/French/Spanish displays
Timer
• Still Picture
• Tracking Adjustment
• Multi-ChannelTV Sound • Repeat Play
DVD
AUDIO CD
MP3
• Audio Language choices* • Markers
• Screen Saver
• Bit Rate display
• Camera Angle *
• Display Panel and Dimmer
• Dolby Digital Sound
• Dynamic Range Control
• Fast/Paused/Slow/Step-by- • Repeat (A-B, Chapter,
Step Playback
• Parental Lock*
• Program Playback
(Audio CD, MP3)
• Random Playback
(Audio CD, MP3)
• Search (Title/Chapter,
Time,Track)
• SRSTruSurround
• Subtitles*
• Zoom Playback
* If available on the DVD
Title,Track, Disc)
Package Contents
The following items are provided with your new DVD/VCR.
• Remote Control and two AA batteries
• One black RF coaxial cable, 75 ohm
• One set of Audio (red and white tips) andVideo (yellow tips) cables
When referring to this manual, remember...
Indicates the feature is available onVideo Cassettes when the
DVD/VCR is inVCR mode.
VCR
Indicates the feature is available on some DigitalVideo Discs when the
DVD/VCR is in DVD mode.
DVD
Indicates the feature is available on some Audio CDs when the
DVD/VCR is in DVD mode.
AUDIO CD
Indicates the feature is available with MP3 files when the DVD/VCR is
in DVD mode.
MP3
DVD Disc Menus...
Some explanations in this manual describe DVD Disc menus. DVD manufacturers set the
menus, which vary among DVDs.All DVDs do not have menus. If the DVD has a menu,
access the DVD Disc menu by pressing DVD, then DISC/MENU on the remote control.
Details are on page 48.
DVD Player Setup Menu...
Some instructions explain how to use the DVD Player’s Setup menu to set up features of
the DVD Player or a DVD.Access the DVD Player menu by pressing SETUP on the
remote control when playback is stopped. Even if a feature is set in the DVD Player’s
menu, it may not be available if the current DVD does not include that feature.
Available Disc Features...
All features described in this manual are not available on every Disc. If the
feature is not available on the Disc, you cannot use the DVD/VCR to
make it available.An “X” will appear in the top right corner of theTV
screen if you try to access a feature that is not currently available.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 6
6 Playable Discs and Video Cassettes
Playable Discs
The DVD Player will play DigitalVideo Discs (DVDs),Audio Compact Discs (CDs), and
some finalized DigitalVideo Discs Rewritable (DVD+RW) and Compact Discs Rewritable
(CD-RW).The DVD Player can play MP3 files recorded on a CD-RW as well.
To play a DVD, make sure it meets the requirements for Region Codes and Color
Systems as described below.
Discs that have the following logos will play on the DVD Player.
Recordable
ReWritable
DVD
DVD
Audio CD
CD-RW
DVD+RW
Region Codes
This DVD/VCR has a Region One (1) DVD Player. DVDs must be labeled for ALL regions
or for Region 1 in order to play on the DVD Player.You can not play DVDs that are
labeled for other regions. Look for the symbols below on your DVDs. If these region sym-
bols do not appear on your DVD, you cannot play the DVD in this DVD Player.
The number inside the globe refers to a region of the world. Region 1 represents the
United States, Canada, upper regions of North America, Bermuda, the U.S.Virgin
Islands, and small regions near Australia.
A DVD labelled for a specific region can only play on DVD Players with the same
region code.
Color Systems
DVDs are recorded in different color systems throughout the world.The most com-
mon color systems are NTSC (which is used primarily in the United States and North
America), PAL, and SECAM.
This DVD Player uses NTSC, so DVDs you play must be recorded in the NTSC sys-
tem.You cannot play DVDs recorded in other formats.The color system of the DVD
may be listed on the DVD or on the Disc case.
Unacceptable Discs
If you insert an unacceptable Disc,“Please insert a playable disc” will appear on the
TV screen. (Also,“- - - - - “ will appear on the display panel.) The following Discs will
not play on this DVD Player.
• CD-ROM
• Compact Disc-Interactive (CD-I)
• Photo CD
• Video Single Disc (VSD)
• DVD-RAM
• DVD-ROM
• Super Audio CD (SACD) (The Audio
CD layer of a hybrid SACD may play.)
Audio of the following discs might play, but video will not be accessible.
• Compact Disc-Graphic (CD-G)
• Compact Disc-Video (CD-V)
PlayableVideo Cassettes
TheVCR of this DVD/VCR has a High Quality (HQ) system and is compatible with
existingVideo Home System (VHS) equipment. Philips recommends you use only
Video Cassettes that have the
mark.The use of other tapes may result in poor
picture quality and excessive deposits on the video heads, which may not be covered
by the warranty if damage occurs.
TheVCR also has a 19 micron head, which provides a better picture when you view
tapes recorded in slow speed (SLP).
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 7
Hookups 7
Determining the best possible connection...
Your hookup will be determined primarily by your existing equipment, especially yourTV. However, the follow-
ing guidelines describe which options have the best picture (video) and sound (audio) quality.
૽૽૽૽
If your television has ComponentVideo In jacks (which also could be labelledY Cr Cb,Y Pr Pb,
orYUV and may be green, blue, and red), use the ComponentVideo jacks (Y Cr Cb) for the
best picture quality.
If you use only this video connection, only the DVD features of the DVD/VCR will be available.
To see DVD features on the TV, set the TV to its ComponentVideo In channel. Details are on
page 12.
If yourTV has S-Video In jacks (which also may be labelledY/C or S-VHS), use the S-Video jack
for excellent picture quality. If you use only this video connection, only the DVD features of the
DVD/VCR will be available.To see DVD features on theTV, set theTV to its S-Video In channel.
Details are on page 11.
If yourTV has a single yellowVideo In jack (which also may be labelled CVBS, Composite, or
baseband), use the yellowVideo jack for good picture quality.This connection allows you to use
both the DVD andVCR features.To see DVD orVCR features on theTV, set the TV to itsVideo
In channel. Details are on page 11.
If yourTV only has an RF-style jack, usually labelled Antenna In, RF In, or 75 ohm, use the ANT-
OUT jack of the DVD/VCR to connect to theTV. Set yourTV to channel 3 or 4 - the same
channel to which the CH3/CH4 switch of the DVD/VCR is set.This connection allows you to
use both the DVD andVCR features. Details are on page eight.
૽૽૽
૽૽
૽૽
૽૽૽૽
૽૽૽
If you have a Stereo Receiver with DIGITAL AUDIO IN jacks, digital audio connections provide
the clearest sound. Connect the DVD/VCR’s COAXIAL DIGITAL AUDIO OUT jack to your
Stereo Receiver for the best sound quality. If you use only this audio connection, only the DVD
features of the DVD/VCR will be available. Details are on page 13.
If digital audio connections are not possible, connect the DVD/VCR’s red and white AUDIO
OUT jacks to the Audio In jacks of your Stereo Receiver orTV.This connection allows you to
use both the DVD andVCR features. Details are on page 11.
Before you begin...
G Refer to the manuals of yourTV, Cable Box, Stereo Receiver, or other devices as necessary. Note the style
of jacks and connectors on the other equipment. Determine how to choose different Audio andVideo In
channels on your other equipment so you can see and hear the DVD/VCR material playing on theTV,
Stereo, etc.
G Disconnect all equipment from the power outlets. Connect the equipment to the power outlets only after
you have finished hooking up everything. Never make or change connections with equipment connected to
the power outlet.
Remember...
G Set theTV to the correctVideo In channel. Such channels may be called AUX or AUXILIARY IN,
AUDIO/VIDEO or A/V IN, EXT1 or External In, etc.These channels often are located near channel 00. See
yourTV owner’s manual for details. If you do not see the DVD orVCR playback on theTV, just keep chang-
ingTV channels until you see the DVD orVCR picture on theTV.
G Set the Stereo Receiver to the correct channel or “source” mode.
G Depending on your connection, you may need to purchase additional cables.
G To use theVCR features, you must include a connection with the supplied yellow video cable and red/white
audio cables or with the supplied RF coaxial cable.
Once you determine the best option, find your choice on pages 8-13. Follow the specific steps for
the hookup you choose. After hooking up the DVD/VCR, go to page 15 before turning on the
DVD/VCR.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 8
8 Hookups (cont’d)
DVD/VCR toTV only
Simplest connection using only supplied black RF coaxial cable
This connection will let you use the features of both theVCR and the DVD Player.
Disconnect the antenna or cable from yourTV and connect it to the
ANT-IN (Antenna In) Jack of your DVD/VCR.
1
Back of DVD/VCR
Antenna
Indoor/Outdoor
(300 ohm)
DVD/VCR
OUT
ANT-IN
COMPONENT
IN
VIDEO OUT
DVD/VCR
AUDIO OUT
L
Y
-
ANT-OUT
r
I
CH3 CH4
ANT-IN
OR
ANT-OUT
CH3 CH4
Cable
(75 ohm)
Connect the supplied black RF coaxial cable to the ANT-OUT
(Antenna Out) Jack on the back of the DVD/VCR and to the
ANTENNA IN Jack on theTV.
2
D
VD/VCR
OUT
ANT-IN
COMPONENT
VIDEO OUT
IN
D
VD/VCR
L
Y
AUDIO OUT
-
ANT-OUT
L
CH3 CH4
ANT-IN
75
ANT /
CABLE
75Ω
ANT
/
CABLE
Antenna or
Cable
ANT-OUT
Antenna In Jack
(on back of TV)
example only
Black RF
coaxial cable
(supplied)
Plug in the power cords of theTV and the DVD/VCR.
3
4
Set the CH3/CH4 switch on the back of the DVD/VCR to CH3 or
CH4, whichever TV channel is not used or least used in your area. Set the
TV to the same channel. For example, if the CH3/CH4 switch is set to
CH3, the TV should be on channel 03.
D
VD/VCR
OUT
ANT-IN
COMPONENT
VIDEO OUT
IN
D
VD/VCR
L
Y
AUDIO OUT
DGAAUDO OUT
ANT-OUT
CH 4
or
CH 3
CH3 CH4
ANT-IN
CH3 / CH4
Switch
ANT-OUT
CH3 CH4
CH3 CH4
You are ready to turn on the DVD/VCR. Go to page 15 before turning
on the DVD/VCR.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 9
Hookups (cont’d) 9
DVD/VCR to Cable Box/DBS (Satellite Receiver) andTV
Using only basic RF coaxial cables
This connection will let you use the features of both theVCR and the DVD Player.
DVD/VCR
2
Cable Box/DBS
1
75
ANT /
CABLE
IN
OUT
ANT-IN
ANT-OUT
CH3 CH4
Cable
Signal
RF coaxial cable
TV’s ANTENNA
RF coaxial cable
IN Jack
3
Connections
Connect a Cable signal to the IN Jack on the Cable Box/DBS.
1
2
Use an RF coaxial cable (as the one supplied) to connect the OUT
Jack on the Cable Box/DBS to the ANT-IN (Antenna In) Jack on the
DVD/VCR. On theVCR of the DVD/VCR, set theTV channel to 03 or
04 (your Cable Box output channel).
Use a second RF coaxial cable to connect the ANT-OUT (Antenna
Out) Jack on the DVD/VCR to theTV’s Antenna In jack. Set theTV
to channel 03 or 04 (the channel to which the CH3/CH4 switch is set
on the back of the DVD/VCR).
3
Remember...
There are two ways to connect your Cable Box/DBS to the DVD/VCR.With the con-
nection on this page:
G Select TV channels at the Cable Box/DBS, not the DVD/VCR.To record or view TV
channels, follow these steps:
1) Press OUTPUT SELECT to put the DVD/VCR inVCR mode.The greenVIDEO
light will appear on the front of the DVD/VCR
2) PressVCR/TV to chooseVCR position.The greenVCR/TV light will appear on
the front of the DVD/VCR
3) PressVCR, then press the CHANNEL/SKIP j/i (p/o) buttons to set the
DVD/VCR to the Cable Box/DBS output channel (03 or 04).
4) Set the TV to the same channel as the CH3/CH4 switch of the DVD/VCR.
5) Select the channel you want to view/record at the Cable Box/DBS.
G You may not view a channel other than the one you are recording.
G You can only program a timer recording for one channel at a time. Set your Cable
Box/DBS to the channel you want to record.When you enter the channel you
want to record in a timer recording, select channel 03 or 04 (the Cable Box/DBS
output channel). (This is step 5 on page 35.) Leave the Cable Box/DBS on for a
timer recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 10
10 Hookups (cont’d)
DVD/VCR to Cable Box/DBS (Satellite Receiver) andTV
Using only basic RF coaxial cables
This connection will let you use the features of both theVCR and the DVD Player.
DVD/VCR
1
Cable Box/DBS
75
ANT /
CABLE
2
ANT-IN
ANT-OUT
IN
CH3 CH4
OUT
Cable
Signal
RF coaxial
cable
TV’s ANTENNA
RF coaxial
cable
IN Jack
3
Connections
Connect a Cable signal to the DVD/VCR’s ANT-IN (Antenna In) Jack.
1
2
Use an RF coaxial cable (as the one supplied) to connect the ANT-
OUT (Antenna Out) Jack on the DVD/VCR to the IN Jack on the
Cable Box/DBS.
Use a second RF coaxial cable to connect the OUT Jack on the
Cable Box/DBS to the ANTENNA IN Jack on theTV.
3
Remember...
There are two ways to connect your Cable Box/DBS to the DVD/VCR.With the con-
nection on this page:
G You may watch one channel while recording another. Follow these steps:
1) Put the Cable Box/DBS on the same channel as the DVD/VCR’s CH3/CH4
switch. Set the TV to the Cable Box/DBS output channel (03 or 04).
2) Press OUTPUT SELECT to put the DVD/VCR inVCR mode.The greenVIDEO
light will appear on the front of the DVD/VCR.Then, press theVCR button, then
pressVCR/TV to chooseVCR position.The greenVCR/TV light will appear on the
front of the DVD/VCR
3) Press CHANNEL/SKIP j/i (p/o) to select the channel you want to
record at the DVD/VCR. Start the recording.
4) Press theVCR/TV button once to put the DVD/VCR in TV position.TheVCR/TV
light will go off.
5) Select the channel you want to watch at the Cable Box/DBS.
G When you play a tape or Disc, make sure the Cable Box/DBS is set to the same
channel as the CH3/CH4 switch on the DVD/VCR. Set the TV to the Cable
Box/DBS output channel (03 or 04).
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 11
Hookups (cont’d) 11
DVD/VCR to aTV that has Audio andVideo In jacks
Using the supplied red, white, and yellow cables
This connection will let you use the features of both theVCR and the DVD Player.
DVD/VCR
OUT
ANT-IN
COMPONENT
VIDEO OUT
IN
DVD/VCR
AUDIO OUT
L
AUDIO
R
Y
DIGITAL AUDIO OUT
PCM/MULTICHANNEL
S-VIDEO
OUT
ANT-OUT
L
Cb
COAXIAL
CH3 CH4
Cr
R
VIDEO
Audio and
Video IN Jacks
on TV
Antenna or
Cable TV
Signal to
Video Cable
3
1
ANT-IN Jack
Audio Cables
2
Connect the antenna or CableTV signal to the ANT-IN (Antenna In)
jack of your DVD/VCR.
1
2
Connect the red and white audio cables (supplied) to the red and
white DVD/VCR AUDIO OUT jacks on the DVD/VCR and to the red
and white AUDIO IN jacks on theTV, matching the cable colors to
the jack colors. If the TV has a single AUDIO IN jack, use the white audio
cable to connect the DVD/VCR’s white DVD/VCR AUDIO OUT jack to the
TV’s AUDIO IN jack.You will not use the red cable.
Connect the yellow video cable (supplied) to the DVD/VCRVIDEO
OUT jack on the DVD/VCR and to theVIDEO IN jack on theTV.
For better DVD picture quality, connect an S-Video cable (not supplied) to the S-
VIDEO OUT jack on the DVD/VCR and to the S-VIDEO IN jack on theTV instead.
However, the S-Video connection only supplies video (picture) for the DVD Player of
the DVD/VCR.Therefore, in order to use theVCR features or viewTV channels at the
DVD/VCR, you still need to either connect the RF coaxial cable between the ANT-OUT
jack of the DVD/VCR and theTV’s Antenna In jack, or connect the yellow video cable
as described earlier.To connect the supplied RF coaxial cable, see step 2 on page
eight.
3
Connect the power cords of theTV and the DVD/VCR to a power
outlet.Turn on theTV and set it to the correct Audio/Video In chan-
nel. If you are using the red/white/yellow audio/video cables forVCR or DVD
playback, choose the Audio/Video In channel at your TV. If you are using the S-
Video cable for DVD playback, choose the S-Video In channel at your TV. If you
are using the RF coaxial cable forVCR or DVD playback, choose channel 3 or
4 at the TV. See your TV owner’s manual for more details. Or, simply continue
changing channels at the TV until you seeVCR or DVD playback on the TV
screen.
4
5
You are ready to turn on the DVD/VCR. Go to page 15 before turn-
ing on the DVD/VCR.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 12
12 Hookups (cont’d)
DVD/VCR to a Stereo and to aTV that has ComponentVideo In jacks
Antenna/Cable
TV Signal
DVD/VCR
DVD/VCR
OUT
ANT-IN
COMPONENT
VIDEO OUT
IN
DVD/VCR
AUDIO OUT
AUDIO
Y
DIGITAL AUDIO OUT
PCM/MULTICHANNEL
S-VIDEO
O
1
ANT-OUT
CH3 CH4
L
Cb
COAXIAL
Cr
R
VIDEO
COMPONENT
VIDEO IN
Y
AUDIO (LEFT) IN
Cb/Pb
Cr/Pr
AUDIO (RIGHT) IN
2
3
Back of Stereo (example only)
Back of TV (example only)
Connect the antenna or CableTV signal to the ANT-IN (Antenna In)
jack of your DVD/VCR.
1
2
Connect the supplied red and white audio cables to the red and
white DVD/VCR AUDIO OUT Jacks on the DVD/VCR and to the red
and white AUDIO IN jacks on the Stereo, matching the cable colors
to the jack colors.
Connect component video cable (not supplied) to the COMPO-
NENTVIDEO OUT jacks on the DVD/VCR and to the COMPO-
NENTVIDEO IN jacks on theTV.
The ComponentVideo connection only supplies video (picture) for the DVD Player of
the DVD/VCR.Therefore, in order to use theVCR features or viewTV channels at the
DVD/VCR, you still need to either connect the RF coaxial cable between the ANT-OUT
jack of the DVD/VCR and theTV’s Antenna In jack, or connect the yellow video cable.
To connect the supplied RF coaxial cable, see step 2 on page eight.To connect the
supplied yellow video cable, see step 3 on page 11.
3
Connect the power cords of all the equipment to a power outlet.
Turn on the Stereo and select the Stereo’s Auxiliary IN station.Turn
on theTV and set it to the ComponentVideo In channel. If you are
using the RF coaxial cable forVCR playback, choose channel 3 or 4 at the TV. If
you are using the red/white/yellow audio/video cables forVCR playback,
choose the Audio/Video In channel at your TV. Or, simply continue changing
channels at the TV until you seeVCR or DVD playback on the TV screen.
4
You are ready to turn on the DVD/VCR. Go to page 15 before turn-
ing on the DVD/VCR.
5
6
After you complete theVCR setup as described on page 15, set
DOLBY DIGITAL to OFF in the DVD Player’s Setup menu. Details are
on page 70. If you play a DVD when the settings are wrong, the sound will be
distorted or you may damage the speakers.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 13
Hookups (cont’d) 13
DVD/VCR to aTV and to a Stereo Receiver that is Dolby Digital-compatible
Using Digital Audio connections
Antenna/Cable TV
1
Signal
DVD/VCR
DVD/VCR
OUT
ANT-IN
COMPONENT
VIDEO OUT
IN
DVD/VCR
AUDIO OUT
L
AUDIO
R
Y
DIGITAL AUDIO OUT
PCM/MULTICHANNEL
S-VIDEO
OUT
ANT-OUT
L
Cb
COAXIAL
CH3 CH4
Cr
R
VIDEO
Stereo Receiver
3
VIDEO IN
COAXIAL
DIGITAL
AUDIO IN
Back of TV (example only)
2
Connect the antenna or CableTV signal to the ANT-IN (Antenna In)
jack of your DVD/VCR.
1
2
Connect a coaxial digital audio cable (not supplied) to the DVD/VCR’s
COAXIAL DIGITAL AUDIO OUT jack and to the COAXIAL DIGITAL
AUDIO IN jack on the Stereo Receiver.
This digital audio connection only provides sound for the DVD Player of the DVD/VCR. So, in
order to use theVCR features or viewTV channels at the DVD/VCR, you still need to either
connect the RF coaxial cable between the ANT-OUT jack of the DVD/VCR and theTV’s
Antenna In jack, or connect the supplied red/white audio cables.To connect the supplied RF
coaxial cable, see step 2 on page eight.To connect the red/white audio cables, see step 2 on
page 11.
Connect the supplied yellow video cable to the yellow DVD/VCR
VIDEO OUT jack on the DVD/VCR and to theVIDEO IN jack on the
TV. To use component video cable or S-Video cable instead for the DVD Player,
see pages 11-12.You will still need the yellow video cable or RF coaxial cable for
VCR features.
3
Plug in the power cords of the stereo receiver,TV, and DVD/VCR.Turn
on the stereo receiver and select its Auxiliary IN channel.Turn on the
TV and set it to the correctVideo In channel.
4
5
You are ready to turn on the DVD/VCR. Go to page 15 before turning on
the DVD/VCR.
Remember...
Some DVDs are recorded in 5.1 channel Dolby Digital Surround. Select 5.1 channel
Dolby Digital Surround Sound in the DVD Disc menu.
If you connect the DVD/VCR to a Dolby Digital Stereo Receiver, set DOLBY DIGITAL
to ON in the DVD Player’s Setup menu. Details are on page 70. If the DVD/VCR is not
connected to a Dolby Digital-compatible Stereo Receiver, set DOLBY DIGITAL to OFF.
Incorrect settings may cause noise distortion and damage the speakers.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 14
14 Remote Control Setup
Putting Batteries in the Remote Control
Remove the battery compartment lid on the bottom
of the remote control by pressing the tab, then lifting the
1
2
3
lid.
1
2
3
Place two AA batteries inside the battery compart-
ment with their and ends aligned as indicated.
+
–
Replace the battery compartment lid.
Using the Remote Control
G Point the remote control at the DVD/VCR’s remote sensor (see
page 20) when using the remote control to operate the
DVD/VCR. Do not point the remote control at the TV.
G Do not put objects between the remote control and the
DVD/VCR.
Recycling Guidelines/Battery Safety
G Your new product and its packaging contain materials that can
be recycled and reused. Specialized companies can recycle your
product to increase the amount that needs to be properly dis-
posed.Your product uses batteries that should not be thrown
away when depleted but should be disposed of as small chemical
waste. Please find out about the local regulations on disposal of
your old product, batteries, and packaging whenever you replace
existing equipment.
G Battery Usage CAUTION - To prevent battery leakage that may
result in bodily injury or damage to the unit:
Install ALL batteries correctly, with the + and - markings on the
battery aligned as indicated on the unit;
Do not mix batteries, for example, old with new or carbon with
alkaline; and
Remove batteries when the unit will not be used for a long
time.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 15
First-time DVD/VCR Setup 15
Before turning on your DVD/VCR, make sure batteries are in the
remote control and the DVD/VCR and TV are connected correctly.
G You cannot program channels if you are using a Cable Box or a
Direct Broadcast System.
Turn on the TV.
2
POWER
MARKER
y
PressVCR, then press POWER . “P-ON” will appear
briefly on the front of the DVD/VCR.The greenVIDEO
light, theVCR/TV light, and the Power light will appear on
the front of the DVD/VCR.
SETUP
AUDIO
SUBTITLE
ANGLE
1
3
1
2
REC/OTR
REPEAT
REPEAT
A-B
CHANNEL/SKIP
CLEAR
5
4
TITLE
MODE
RETURN
Turn on theTV. Set it to the same channel as the
CH3/CH4 switch on the back of the DVD/VCR. The
display shown below will appear. (If the display does not
appear, check your hookups, then follow the steps on page
24 to set up channels and page 29 to select a language.)
OUTPUT SELECT
DVD
DISC
VCR
OK
MENU
SELECT op
STOP
PLAY
→ ENGLISH
FRANCAIS
ESPAÑOL
ON
REW
FF
PAUSE
MAKE SELECTION OR
PUSH MENU TO CONTINUE
TIMER SET
VCR/TV
1
4
7
2
3
6
9
5
8
0
Within 60 seconds, press PLAY B (o) or STOP
C
MEMORY
SPEED
SLOW
(p) to select English, French, or Spanish as the lan-
3
4
guage forVCR on-screen displays and menus.
+
10
SEARCH MODE DISPLAY ZOOM
Press DISC/MENU.
TIME SEARCH STATUS/EXIT
CONNECT ANTENNA OR CABLE
TO VCR
THEN...
PUSH CH UP KEY
Helpful Hints
OR...
FOR PLAY ONLY - PUSH STOP
• To skip this feature and play a tape
immediately, insert a tape with its
record tab removed.
• To skip step 3, press DISC/MENU.
All on-screen displays will be in
English.To skip step 5, press STOP
C (p). Channels will not be pro-
grammed, and CHANNELS NOT
SET will appear on the screen.
Within 60 seconds, press CHANNEL/SKIP G (o)
to begin automatic channel programming. AUTO
CH PROGRAMMING IN PROCESS PLEASE WAIT will
appear on the TV screen.The DVD/VCR will memorize all
available channels.When all channels are memorized,
CHANNELS ARE SET will appear on the screen briefly,
then TV programming will appear.
5
These channels will be available when you want to watch
TV while inVCR mode.To put the DVD/VCR inVCR
mode, press OUTPUT SELECT so the greenVIDEO light
appears.Then pressVCR/TV so theVCR/TV light appears.
Press theVCR button, then use CHANNEL/SKIP j/i
(p/o) and the Number buttons to select a TV channel for
viewing.
• If you try to program channels
when there is no antenna or Cable
TV signal connected to the ANT-IN
jack of the DVD/VCR, programming
will appear to take place, but even-
tually a NO TV SIGNALS message
will appear. Connect an antenna or
CableTV signal to the DVD/VCR’s
ANT-IN (Antenna In) jack and press
CHANNEL/SKIP G (o) again. If
channel programming does not
resume, follow the steps on page 24.
• You may need to repeat the steps
on this page if the power fails.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 16
16 Video Cassette Playback
VCR
Turn on the TV.
1
2
Read and follow the steps below to play a tape.
Insert a tape in the
DVD/VCR.
Turn on theTV and set it to channel 3 or 4, whichev-
er channel the CH3/CH4 switch on the back of the
DVD/VCR is set to. Or, if you connected the DVD/VCR to
the TV using audio and video cables, select the correct
audio and video in channel at the TV. Details are on page 11.
1
2
POWER
MARKER
SETUP
AUDIO
SUBTITLE
ANGLE
REC/OTR
REPEAT
REPEAT
A-B
With the DVD/VCR power off, insert a tape in the
cassette compartment of the DVD/VCR. The Power,
VIDEO,VCR/TV, and CST. IN lights will appear on the front
of the DVD/VCR. If the tape’s record tab has been
removed, playback will start automatically.
If the DVD/VCR power is already on, press OUTPUT
SELECT to put the DVD/VCR inVCR mode if necessary.
The greenVIDEO light will appear on the front of the
DVD/VCR.
CHANNEL/SKIP
CLEAR
TITLE
MODE
RETURN
OUTPUT SELECT
DVD
DISC
VCR
OK
3
MENU
STOP
PLAY
4
5
REW
FF
If playback does not start automatically, pressVCR,
PAUSE
then press PLAY B (o).
3
4
5
6
TIMER SET
VCR/TV
1
4
2
5
3
6
Press STOP C (p) to stop playback.
Press REW h (s) to rewind the tape.
Press STOP/EJECT on the
DVD/VCR.
6
After the tape stops, press STOP/EJECT on the
DVD/VCR to remove the tape.
Helpful Hints
•
If the tape you want to play is
already in the DVD/VCR, make sure
the DVD/VCR power is on and the
DVD/VCR is inVCR mode andVCR
position. (The greenVIDEO light and
theVCR/TV light will appear on the
front of the DVD/VCR.) PressVCR,
then press PLAY B(K).
• Other tape playback options and
features are on pages 39-46.
• When you play a tape recorded in
S-VHS format on this unit, you can
not get the high resolution that
would be available on an S-VHS
VCR. Noise lines (black and white
streaks) may appear on the picture.
• If REPEAT PLAY is ON, playback will
begin automatically when you insert
a tape, even when the record tab is
intact. Details are on page 39.
• You must connect the DVD/VCR to
aTV using the RF coaxial cable or
the audio/video cables in order to
use theVCR features.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 17
Disc Playback 17
DVD
AUDIO CD
Press OPEN/CLOSE on
G Before you begin, turn on the power of the TV, stereo receiver
and any other equipment connected to the DVD/VCR. Make
sure the TV and the stereo receiver (if applicable) are set to
the correct channel. Details are on pages 8-13.
the DVD/VCR.
3
Insert a Disc.
4
y
Press POWER
will appear briefly on the display panel.The DVD/VCR will
be inVCR mode.
to turn on the DVD/VCR. “P-ON”
POWER
1
2
3
4
MARKER
SETUP
AUDIO
SUBTITLE
ANGLE
1
5
Press OUTPUT SELECT so the red DVD light
appears on the front of the DVD/VCR.Then, press
DVD.
REC/OTR
REPEAT
REPEAT
A-B
CHANNEL/SKIP
CLEAR
TITLE
MODE
RETURN
Press OPEN/CLOSE on the front of the DVD/VCR
to open the Disc tray.
OUTPUT SELECT
DVD
DISC
VCR
OK
2
6
MENU
Place a Disc into the tray.
Some DVDs are recorded on both sides. Make sure the
side you want to play is facing up. Or, if the DVD is record-
ed on only one side, place the Disc in the tray with the
label facing up.
STOP
PLAY
REW
FF
PAUSE
Press PLAY B (o). The tray will close automatically, and
playback will begin at the first Chapter or Track of the
Disc.
Or, you may press OPEN/CLOSE or press the tray toward
the DVD/VCR to close the tray; DVD playback will start
automatically.
If a DVD menu appears instead, see page 48.
With some Audio CDs, playback will not begin unless you
press PLAY B (o).
TIMER SET
VCR/TV
1
4
2
5
3
6
5
6
MEMORY
Helpful Hints
• An “X” may appear at the top right
corner of theTV screen when you
try a feature. Either the feature is
not available on the Disc, or the
DVD/VCR cannot access the feature
at this time.This does not indicate a
problem with the DVD/VCR.
• If a Disc is dirty or scratched, the
pictures may appear distorted or
playback may stop. Remove the
Disc and turn off the DVD/VCR.
Disconnect the power cord, then
reconnect it. Clean the Disc, then
turn on the DVD/VCR again and
reinsert the Disc for playback.
• When the DVD or CD light appears
on the display panel, the Disc is
loaded completely and is ready for
playback.
Press STOP C (p) to stop playback. If Disc playback is
stopped for more than five minutes, a screen saver will
appear. Details are on page 75.
• When you press OPEN/CLOSE or
PLAY (DVD) on the front of the
DVD/VCR when the power is off,
the DVD/VCR will turn on automati-
cally and will be in DVD mode.
Remember, this DVD/VCR
will play only certain Discs.
See page six for details.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 18
18 Display Panel (DVD)
Display with Dimmer
DVD Light (red)
Messages about current Disc oper-
ations appear here. See Display
Messages below.You can adjust the
brightness of the display. Details are
on pages 66-67.
This light appears when the DVD/VCR is in DVD mode.
You can only watch DVDs when the red DVD light is on.
To make the red DVD light come on, press the SOURCE
button on the front of the DVD/VCR or OUTPUT
SELECT on the remote control.
POWER ON/OFF
Disc tray
Insert a
VIDEO
L
CHANNEL
TIMER
DVD
OPEN/CLOSE
STOP PREV
PLAY
NEXT
DVD
VIDEO
STOP/EJECT
REW
PLAY
F.FWD REC
VCR/TV
CST.IN
AUDIO
R
SOURCE
SEARCH
Disc here.
Power Light
This light appears
when the power is on.
REPEAT:Appears
during Repeat
Playback of a Disc,
along with A-B,
TITLE, CHP., or
DVD: Lights when a
DVD is in the tray and
ready for playback.
TRK., depending on
the type of Repeat
Playback you have
TITLE
CHP. TRK.
selected. Details are
on page 53.
CD: Lights when an Audio
CD is in the tray and
ready for playback.
REPEAT
A-B: Appears during
A-B Repeat Playback.
Details are on page 53.
–
A
B
F :Appears
when play is
paused.
Displays the elapsed playing time of the
currentTitle orTrack. Briefly displays
Title, Chapter, orTrack numbers.
B:Appears during
Disc playback.
Display Messages
Power is turning on.
Appears after the disc tray closes if the tray is empty, if
there is an error reading the disc, or if an unacceptable
disc is installed.
Tray is opening or is open.
Tray is closing. This also may appear as the DVD Player
tries to load a Disc.
Disc is loading.
Power is turning off.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 19
Display Panel (VCR) 19
Cassette Compartment
Insert a video cassette here.
POWER ON/OFF
VIDEO
L
CHANNEL
TIMER
DVD
OPEN/CLOSE
STOP PREV
PLAY
NEXT
DVD
SOURCE
VIDEO
STOP/EJECT
REW
PLAY
F.FWD REC
VCR/TV
CST.IN
AUDIO
R
SEARCH
Power Light
This red light
appears when
the power is on.
POWER ON/OFF
VIDEO Light (Green)
This light appears when
the DVD/VCR is inVCR
mode.You can only
watch video cassettes or
accessVCR features and
TV channels when the
greenVIDEO light is on.
To make the green
VIDEO
L
CHANNEL
TIMER
DVD
VIDEO
STOP/EJECT
REW
PLAY
F.FWD REC
VCR/TV
CST.IN
AUDIO
R
SOURCE
VCR/TV Light
VIDEO light come on,
press OUTPUT SELECT
on the remote control
or SOURCE on the
This green light appears
when theVCR is inVCR
position.This light does not
appear when theVCR is in
TV position.
REC (record) Light
This red light appears during
VCR recording. It flashes
when recording is paused.
front of the DVD/VCR.
To chooseVCR position,
pressVCR/TV on the
remote so theVCR/TV light
appears. InVCR position,
you can watch tapes and
watch or recordTV chan-
nels (changingTV channels
at theVCR).
TIMER Light
This red light glows when the
DVD/VCR is set for a timer
recording or during a One-Touch
Recording.
It flashes if a timer recording is set
but no tape is in the DVD/VCR.
It flashes when all timer record-
ings or One-Touch Recordings are
finished. Details are on pages 33-37.
CST.IN Light
(cassette inside)
This green light appears
when a video cassette
is in the DVD/VCR.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 20
20 Front Panel
SOURCE Button
POWER ON/OFF Button
Press to select DVD mode orVCR mode.The red DVD light
appears in DVD mode.The greenVIDEO light appears in theVCR
mode.
Press to turn the power on and off.
TIMER Button
Press to set a timer
recording.
PLAY Button (DVD)
Press to start Disc playback.
Details are on page 17.
Details are on page 36.
CHANNEL K/L Buttons
InVCR mode, press to change
TV channels at the DVD/VCR.
Press to adjust tracking or to
remove jitter in a Still picture.
Details are on page 43.
STOP Button (DVD)
Press to stop Disc playback.
Details are on page 17.
OPEN/CLOSE Button (DVD)
Press to open or close the Disc tray.
Details are on page 17.
REC (record)
button (VCR)
Press once to start a
recording. Press repeat-
edly to start a One-
Touch Recording.
Remote Sensor
Receives a signal from your
remote control so you can work
your DVD/VCR from a distance.
Details are on page 33.
POWER ON/OFF
VIDEO
L
CHANNEL
TIMER
STOP PREV
PLAY
NEXT
OPEN/CLOSE
DVD
VIDEO
STOP/EJECT
REW
PLAY
F.FWD REC
DVD
VCR/TV
CST.IN
AUDIO
R
SOURCE
SEARCH
PLAY Button (VCR)
PREV/NEXT SEARCH Buttons
(previous/next/search DVD)
Press during playback to go to previous or
subsequentTracks or Chapters. Press and
hold for three seconds for a forward or
reverse search.
Press to play a video cassette.
Press to release Slow, Search, or
Still mode and return to play-
back. Details are on page 42.
Press to select an item in the
VCR menu.
STOP/EJECT Button (VCR)
Press once to stop tape playback.
When playback is stopped, press to
eject the tape. Press to select an item
in theVCR menu.
REW, F.FWD Buttons
(rewind, fast forwardVCR)
Press to rewind or fast forward
a video cassette. Details are on
page 42. Press REW to go to a
previousVCR menu. Press
F.FWD to go to the nextVCR
menu.
AUDIO andVIDEO In Jacks
Connect audio and video cables com-
ing from the audio and video out jacks
of a camcorder, anotherVCR, another
DVD Player, or audio system here.
Details are on page 38.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 21
Rear Panel 21
ANT-IN (Antenna In) Jack
Connect your antenna or Cable TV signal here.
Details are on pages 8-13.
COMPONENTVIDEO OUT
(Y Cb Cr) Jacks
Connect optional component video cables
here and to the ComponentVideo In jacks
of a television. Details are on page 12.
AUDIO IN (right/left) Jacks
Connect audio cables coming from the audio
COAXIAL DIGITAL AUDIO
OUT Jack
out jacks of a camcorder, anotherVCR, or an
audio source here. Details are on page 38.
Connect an optional coaxial dig-
ital audio cable here and to the
Coaxial Digital Audio In jack of
a decoder or stereo receiver.
Details are on page 13.
AC Power Cord
Connect to a standard AC outlet to sup-
ply power to the DVD/VCR.
DVD/VCR
OUT
ANT-IN
COMPONENT
VIDEO OUT
IN
DVD/VCR
AUDIO OUT
Y
L
AUDIO
R
DIGITAL AUDIO OUT
PCM/MULTICHANNEL
S-VIDEO
OUT
ANT-OUT
L
Cb
COAXIAL
CH3 CH4
Cr
R
VIDEO
VIDEO IN Jack
Connect a cable coming from the video
out jack of a camcorder, anotherVCR, or
another DVD Player here. Details are on
page 38.
DVD/VCR
VIDEO OUT Jack
S-VIDEO OUT Jack
Connect the yellow video cable (sup-
plied) here and to the TV’sVideo In jack.
Details are on pages 11-13.
Connect an optional S-Video cable here
and to the S-Video In jack of a television.
Details are on page 11.
DVD/VCR AUDIO OUT Jacks
Connect the supplied audio cables here
and to the Audio In jacks of a television
or other audio equipment. Details are on
pages 11-12.There are two sets of AUDIO
OUT jacks in case you want to connect the
second pair of jacks to additional equipment
(for example, a stereo receiver in addition to
theTV hookup).
CH3/CH4 Switch
Set to channel 3 or 4 to use your TV with
your DVD/VCR. Details are on pages 8-10.
ANT-OUT (Antenna Out) Jack
Use the supplied RF coaxial cable to connect this jack
to the ANTENNA IN Jack on your TV, Cable Box, or
Direct Broadcast System. Details are on pages 8-10.
Helpful Hint
• The S-VIDEO OUT, COMPONENT
VIDEO OUT, and COAXIAL DIGI-
TAL AUDIO OUT jacks are only
useful in DVD mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 22
22 Remote Control Buttons
MARKER Button
y
POWER
Button
Press to set a Marker, which
gives you quick access to
points you select on a Disc.
Press to turn the power on
and off.
ANGLE Button
Press to see a DVD picture
from a different angle (if avail-
able). Details are on page 55.
POWER
Details are on page 54.
MARKER
SUBTITLE Button
SETUP
AUDIO
SUBTITLE
ANGLE
Press to select a language for
DVD subtitles. Details are on
REC/OTR
REPEAT
REPEAT
A-B
A-B REPEAT Button
Press to set up A-B Repeat.
Details are on page 53.
page 55.
CHANNEL/SKIP
CLEAR
REPEAT Button
Press to play a Track,Audio
TITLE
MODE
RETURN
RETURN Button
CD,Title, or Chapter repeat-
Press to return to the previ-
ous DVD Player’s Setup menu
or to remove the Setup menu.
OK Button
OUTPUT SELECT
edly. Details are on page 53.
DVD
DISC
VCR
OK
DVD Button
Press before using the remote
MENU
control for DVD features.
Press to confirm or select
DVD Player menu items.
PLAY B (o) Button
Press to begin Disc or tape
playback. Press to select an
item in theVCR menu.
Arrow
s
B KL Buttons
STOP
PLAY
Press to select an item in the
DVD Player Setup menu or in
the DVD Disc menu.
REW
FF
PAUSE
FF g (B)
TIMER SET Button
TIMER SET
VCR/TV
(fast forward) Button
In DVD mode, press to fast
forward the Disc. Details are
on page 49. Press when DVD
playback is paused to start
slow motion playback. Details
are on page 59.
Press to set a timer recording.
Details are on page 36.
1
4
7
2
3
6
9
5
8
0
MEMORY
SPEED
SLOW
Number Buttons
In DVD mode, press to select
a Track or Chapter for Disc
playback. Details are on pages
50-51. Press to set up a
+
10
InVCR mode, press to fast
forward the tape. Details are
on page 42. Press to go to the
nextVCR menu or to change
aVCR menu item.
SEARCH MODE DISPLAY ZOOM
Program. Details are on page 60.
InVCR mode, use to set up
VCR features or to select TV
channels. Enter channel num-
bers as a two-digit number for
the quickest results (to select
channel 6, press 0,6).
TIME SEARCH STATUS/EXIT
ZOOM Button
Press to enlarge the DVD pic-
ture. Details are on page 59.
Otherwise, there may be a
brief delay. For channels 100
and above, enter a three-digit
number (for channel 117, press
1, 1, 7). If you have Cable TV,
channels 1-125 are available. If
you have an antenna, channels
2-69 are available.
DISPLAY/STATUS/EXIT
Button
InVCR mode, press to access
or remove theVCR’s on-
screen status display. Details
are on page 30. Press to exit
on-screenVCR menus.
In DVD mode, press to access
Disc information. Details are on
page 65.
The +10 button has no effect
inVCR mode.
Helpful Hints
• For DVD Player features, press the DVD button first before pressing other buttons.To make sure the DVD/VCR is in
DVD mode, press OUTPUT SELECT so the red DVD light appears on the front of the DVD/VCR.
• ForVCR features, press theVCR button before pressing any other buttons.To make sure the DVD/VCR is inVCR
mode, press OUTPUT SELECT so the greenVIDEO light appears on the front of the DVD/VCR.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 23
Remote Control Buttons (cont’d) 23
SETUP Button
AUDIO Button
Press to access or remove the
DVD Player’s Setup menu.
REC/OTR (record/one-
touch recording) Button
Press once to start aVCR
recording. Details are on page
31. Press repeatedly to start a
One-Touch Recording. Details
are on page 33.
Press to choose a DVD audio
language. Details are on page
58. Press to choose a sound
mode. Details are on page 61.
POWER
MARKER
CHANNEL/SKIP j/i
(p/o) Buttons
In DVD mode, press to skip
Chapters or Tracks. Details are
on page 51. InVCR mode,
press to change TV channels
at the DVD/VCR.
VCR Button
Press before using the remote
control forVCR features.
SETUP
AUDIO
SUBTITLE
ANGLE
REC/OTR
REPEAT
REPEAT
A-B
CHANNEL/SKIP
CLEAR
CLEAR Button
TITLE
MODE
RETURN
Press to erase incorrect infor-
mation. InVCR mode, press to
reset the real-time tape
OUTPUT SELECT
DVD
DISC
VCR
OK
counter. Details are on page 40.
MENU
TITLE Button
Press to see a DVD Title
menu. Details are on page 48.
OUTPUT SELECT Button
Press to select DVD mode or
VCR mode.The red DVD light
indicates DVD mode.The green
VIDEO light indicatesVCR
mode.
STOP
PLAY
MODE Button
Press to set a Program. Details
are on page 60. Press to start
Random playback. Details are
on page 61.
REW
FF
PAUSE
PAUSE k Button
TIMER SET
VCR/TV
Press to pause Disc playback
or to advance the picture one
frame at a time. Details are on
page 52. Press to pause or
resumeVCR recording. Details
are on page 31. Press during
tape playback to freeze or
unfreeze the picture. Details
are on page 42.
DISC/MENU Button
Press to see a DVD Disc menu
or theVCR menu.
STOP C (p) Button
Press to stop Disc playback,
tape playback, or recording.
Press to select an item in the
VCR menu.
REW h (s) (rewind)
Button
Press to fast reverse a DVD or
Audio CD. Details are on page
49. Press to rewind a tape.
Details are on page 42. Press to
go to a previousVCR menu.
1
4
7
2
3
6
9
5
8
0
MEMORY
SPEED
SLOW
+
10
SEARCH MODE DISPLAY ZOOM
TIME SEARCH STATUS/EXIT
VCR/TV Button
Use to selectVCR orTV posi-
tion.TheVCR/TV light appears
when the DVD/VCR is inVCR
position.
G VCR Position
SEARCH MODE/
InVCR mode (the green
VIDEO light is on), watch a
tape or watch/recordTV pro-
grams. Use CHANNEL/SKIP
j/i (p/o) or the
Number buttons to change
channels at the DVD/VCR.
In DVD mode (the red DVD
light is on), use the DVD Player
and its features.
TIME SEARCH Button
In DVD mode, press to search
for a specific
Title/Chapter/Track/Time.
Details are on pages 50-51.
InVCR mode, press to fast
forward or rewind the tape a
specific length of time. Details
are on page 41.
SLOW Button
G TV Position
Press to view a tape in slow
motion; press again to resume
normal playback. Details
are on page 42.
InVCR mode, watchTV chan-
nels or watch one program
while recording another. Details
are on page 32.
SPEED Button
MEMORY Button
Press to memorize a tape posi-
tion. Details are on page 40.
Press to select theVCR’s record-
ing speed (SP or SLP). Details are
on pages 31, 36, and 73.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 24
24 Channel Setup
Although your DVD/VCR may automatically memorize the chan-
nels you receive when you turn it on for the first time, you can set
up the channels again.
G Before you begin, place the DVD/VCR inVCR mode. Press
OUTPUT SELECT so the greenVIDEO light appears on the
front of the DVD/VCR. PressVCR/TV so the greenVCR/TV
light appears on the front of the DVD/VCR.
POWER
MARKER
SETUP
AUDIO
SUBTITLE
ANGLE
REC/OTR
REPEAT
REPEAT
A-B
PressVCR, then press DISC/MENU.
CHANNEL/SKIP
CLEAR
1
TITLE
MODE
RETURN
SELECT op CHOOSE
B
OUTPUT SELECT
→ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
DVD
DISC
VCR
OK
1
MENU
TO END PUSH EXIT
STOP
PLAY
C (p) to selectTUNER 2-4
Press PLAY B (o) or STOP
SET UP, then press FF g (B).
REW
FF
2
PAUSE
SELECT op CHOOSE
B
→ TV
ON
ON
TIMER SET
VCR/TV
CABLE TV
1
4
7
2
3
6
9
AUTO PROGRAMMING
ADD/DELETE CH
CH MEMORY REVIEW
TV STEREO
5
8
0
MEMORY
SPEED
SLOW
2ND AUDIO
TO END PUSH EXIT
+
10
SEARCH MODE DISPLAY ZOOM
Press PLAY B (o) or STOP C (p) to selectTV (if
you have an antenna) or CABLE TV (if you have a
cable connection).Then, press FF g (B). ON will
appear beside your choice.
TIME SEARCH STATUS/EXIT
3
4
Press PLAY B (o) or STOP C (p) to select AUTO
PROGRAMMING, then press FF g (B). The
DVD/VCR will memorize all the channels you receive.
AUTO CH PROGRAMMING
IN PROCESS
PLEASE WAIT
START
FINISH
Helpful Hints
Wait for a few minutes while the DVD/VCR sets up
the channels. When this is complete, CHANNELS ARE
SET will appear on the screen.Then the programming of
the lowest channel number placed in the DVD/VCR’s mem-
ory will appear on the screen. Now when you press
CHANNEL/SKIP j/i (p/o), you will scan only
through channels you receive.You still can select any chan-
nel number using the Number buttons.
• You cannot enter theTUNER SET
UP menu when you are in Line
Input mode (channel 001 or 002).
When you select channel 001 or
002,AV REAR or AV FRONT will
appear on the screen briefly.
• You cannot program channels if you
are using a Cable Box or DBS.
• If you selectTV at step 3, channels
2-69 will be available. If you select
CABLETV at step 3, channels 1-
125 will be available.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 25
Channel Setup (cont’d) 25
Adding/Deleting Channels
You may want to add or delete TV channels if your channel lineup
changes or if you no longer watch some channels.
G Before you begin, place the DVD/VCR inVCR mode. Press
OUTPUT SELECT so the greenVIDEO light appears on the
front of the DVD/VCR. PressVCR/TV so the greenVCR/TV
light appears on the front of the DVD/VCR.
POWER
MARKER
SETUP
AUDIO
SUBTITLE
ANGLE
REC/OTR
REPEAT
REPEAT
A-B
PressVCR, then press DISC/MENU.
CHANNEL/SKIP
CLEAR
1
TITLE
MODE
RETURN
SELECT op CHOOSE
B
OUTPUT SELECT
→ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
DVD
DISC
VCR
OK
1
MENU
TO END PUSH EXIT
STOP
PLAY
2-5
Press PLAY B (o) or STOP C (p) to selectTUNER
REW
FF
SET UP, then press FF g (B).
2
3
PAUSE
Press PLAY B (o) or STOP C (p) to select
ADD/DELETE CH, then press FF g (B).
NOTE: If you selectTV at theTUNER SET UP menu, channel
numbers 2-69 will appear on the ADD/DELETE CH menu.
TIMER SET
VCR/TV
1
4
7
2
3
6
9
5
8
0
MEMORY
SPEED
SLOW
SELECT op ADD/DELETE
B
+
10
124
125
1
DELETED
DELETED
DELETED
ADDED
SEARCH MODE DISPLAY ZOOM
→
TIME SEARCH STATUS/EXIT
2
3
ADDED
6
TO END PUSH EXIT
Press PLAY B (o) or STOP C (p) until the channel
number you want to add or delete appears beside the
arrow.
4
SELECT op ADD/DELETE
B
16
17
18
19
20
DELETED
ADDED
ADDED
ADDED
ADDED
→
TO END PUSH EXIT
Press FF g (B) to select ADDED or DELETED.
Repeat steps 4 and 5 until you have added or deleted all
the channels you wanted to add or delete.
5
6
Press DISPLAY/STATUS/EXIT.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 26
26 Channel Setup (cont’d)
Reviewing Memorized Channels
POWER
To see which TV channels the DVD/VCR has memorized, follow
the steps below.
MARKER
SETUP
AUDIO
SUBTITLE
ANGLE
G Before you begin, place the DVD/VCR inVCR mode. Press
OUTPUT SELECT so the greenVIDEO light appears on the
front of the DVD/VCR. PressVCR/TV so the greenVCR/TV
light appears on the front of the DVD/VCR.
REC/OTR
REPEAT
REPEAT
A-B
CHANNEL/SKIP
CLEAR
TITLE
MODE
RETURN
PressVCR, then press DISC/MENU.
OUTPUT SELECT
DVD
DISC
VCR
OK
1
SELECT op CHOOSE
B
1
2
MENU
→ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
STOP
PLAY
2,3
TO END PUSH EXIT
REW
FF
PAUSE
Press PLAY B (o) or STOP C (p) to selectTUNER
SET UP, then press FF g (B).
TIMER SET
VCR/TV
1
4
7
2
3
6
9
SELECT op CHOOSE
B
5
8
0
→ TV
ON
ON
MEMORY
SPEED
SLOW
CABLE TV
AUTO PROGRAMMING
ADD/DELETE CH
CH MEMORY REVIEW
TV STEREO
+
10
SEARCH MODE DISPLAY ZOOM
2ND AUDIO
TO END PUSH EXIT
TIME SEARCH STATUS/EXIT
4
Press PLAY B (o) or STOP C (p) to select CH
MEMORY REVIEW, then press FF g (B). A list of
memorized channels will appear on the screen.
G If all the memorized channels don’t fit on the screen, press
FF g (B) to see the remaining channels.Then press REW
h (s) to return to the first screen of channels.
G If you do not press any buttons within 10 seconds, you
will either go to the next screen of channels or you will
return to the previous menu.
3
4
Press DISPLAY/STATUS/EXIT once or twice to
exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 27
Clock (VCR) 27
Follow the steps below to set the clock for theVCR. Make sure:
G The DVD/VCR is on and theVCR/TV light appears on the front
of the DVD/VCR. (If it does not, pressVCR/TV once.)
G You make each entry within 60 seconds of the previous entry.
G Before you begin, place the DVD/VCR inVCR mode. Press
OUTPUT SELECT so the greenVIDEO light appears on the
front of the DVD/VCR.
POWER
MARKER
SETUP
AUDIO
SUBTITLE
ANGLE
REC/OTR
REPEAT
REPEAT
A-B
CHANNEL/SKIP
CLEAR
PressVCR, then press DISC/MENU.
1
TITLE
MODE
RETURN
OUTPUT SELECT
DVD
DISC
VCR
OK
Press PLAY B (o) or STOP C (p) to select SET
1
2,3
MENU
CLOCK, then press FF g (B).
2
Press PLAY B (o) or STOP C (p) to select SET
STOP
PLAY
CLOCK, then press FF g (B).
3
REW
FF
TIME – – :– –
PAUSE
DATE – – / – – / – –
TIMER SET
VCR/TV
1
4
7
2
3
6
9
5
8
0
TO END PUSH EXIT
4,5
MEMORY
SPEED
SLOW
+
10
Press two Number buttons for the hour(s) and two
SEARCH MODE DISPLAY ZOOM
Number buttons for the minute(s).Then press 1 for
4
TIME SEARCH STATUS/EXIT
AM or 2 for PM. For example, for 2:15 PM, press 02, 15,
2.
6
TIME 02 :15 PM
MONTH – – / – – / – –
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
Press two Number buttons for the month, two
Number buttons for the day, and two Number but-
5
tons for the year. For example, for July 1, 2002, press 07,
01, 02.The day of the week will appear automatically.
Helpful Hints
TIME 02 :15 PM
• Enter a 0 before a single-digit
number.
DATE 07 / 01 / 02
MON.
• Entries that do not match the
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
DVD/VCR’s clock or calendar will
cause a question mark to appear
on the screen.
• To make corrections, press CLEAR
until the space for the number you
want to correct is flashing.Then
enter the correct number.
Press DISPLAY/STATUS/EXIT.
6
• To see the current time on theTV
screen, press DISPLAY/STATUS/
EXIT. Details are on page 30.
• Power failures can erase the clock
setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 28
28 Daylight-SavingsTime
You may program the DVD/VCR so theVCR clock will automati-
cally move forward one hour in April and turn back one hour in
October. Daylight-Savings Time is ON when you receive your
DVD/VCR.Turn Daylight-Savings Time ON or OFF by following
the steps below. Before you begin:
POWER
MARKER
SETUP
AUDIO
SUBTITLE
ANGLE
G Set the clock. Details are on page 27.
REC/OTR
REPEAT
REPEAT
A-B
G Place the DVD/VCR inVCR mode. Press OUTPUT SELECT so
the greenVIDEO light appears on the front of the DVD/VCR.
PressVCR/TV so the greenVCR/TV light appears on the front
of the DVD/VCR.
CHANNEL/SKIP
CLEAR
TITLE
MODE
RETURN
OUTPUT SELECT
DVD
DISC
VCR
OK
PressVCR, then press DISC/MENU.
1
2,3
MENU
1
SELECT op CHOOSE
B
→ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
STOP
PLAY
REW
FF
TO END PUSH EXIT
PAUSE
TIMER SET
VCR/TV
1
4
7
2
3
6
9
Press PLAY B (o) or STOP C (p) to select SET
CLOCK, then press FF g (B).
5
8
0
2
3
MEMORY
SPEED
SLOW
SET CLOCK
+
10
→ SET CLOCK
SEARCH MODE DISPLAY ZOOM
DAYLIGHT SVG TIME [ON]
TIME SEARCH STATUS/EXIT
SELECT op CHOOSE
TO END PUSH EXIT
B
4
Press PLAY B (o) or STOP C (p) to select DAY-
LIGHT SVGTIME.Then, press FF g (B) so OFF
(or ON) appears beside DAYLIGHT SVGTIME.
SET CLOCK
SET CLOCK
→ DAYLIGHT SVG TIME [ON]
SELECT op CHOOSE
B
TO END PUSH EXIT
Press DISPLAY/STATUS/EXIT.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 29
Language Selection (VCR) 29
Follow the steps below to change the language of theVCR on-
screen displays and menus.
POWER
MARKER
G Before you begin, place the DVD/VCR inVCR mode. Press
OUTPUT SELECT so the greenVIDEO light appears on the
front of the DVD/VCR. PressVCR/TV so the greenVCR/TV
light appears on the front of the DVD/VCR.
SETUP
AUDIO
SUBTITLE
ANGLE
REC/OTR
REPEAT
REPEAT
A-B
CHANNEL/SKIP
CLEAR
TITLE
MODE
RETURN
PressVCR, then press DISC/MENU.
OUTPUT SELECT
DVD
DISC
VCR
OK
1
1
SELECT op CHOOSE
B
MENU
→ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
STOP
PLAY
2-4
TO END PUSH EXIT
REW
FF
PAUSE
Press PLAY B (o) or STOP C (p) to selectVCR
SET UP, then press FF g (B).
TIMER SET
VCR/TV
1
4
7
2
3
6
9
2
3
SELECT op CHOOSE
B
5
8
0
→ REPEAT PLAY
ON SCREEN MODE
AUDIO OUT
LANGUAGE
BLUE BACKGROUND ON
OFF
MEMORY
SPEED
SLOW
+
10
SEARCH MODE DISPLAY ZOOM
TO END PUSH EXIT
TIME SEARCH STATUS/EXIT
Press PLAY B (o) or STOP C (p) to select LAN-
GUAGE, then press FF g (B).
5
SELECT op
→ ENGLISH
FRANCAIS
ESPAÑOL
ON
Helpful Hint
• If you accidentally select French and
need English:
MAKE SELECTION OR
TO END PUSH EXIT
1. PressVCR, then press DISC/MENU.
2. Press PLAY B (o) or STOP C (p)
to select PROGRAMMATION DU
VCR, then press FF g (B).
3. Press PLAY B (o) or STOP C (p)
to select LANGUE, then press FF
g (B).
4. Press PLAY B(o) or STOP C (p)
to select ENGLISH.
5. Press DISPLAY/STATUS/EXIT.
Press PLAY B (o) or STOP C (p) to select English,
French (FRANCAIS), or Spanish (ESPAÑOL) as the
language forVCR on-screen displays and menus.
4
5
Press DISPLAY/STATUS/EXIT.
• If you accidentally select Spanish
and need English:
1. PressVCR, then press DISC/MENU.
2. Press PLAY B (o) or STOP C (p)
to select PREPARE ELVCR, then
press FF g (B).
3. Press PLAY B (o) or STOP C (p)
to select LENGUAJE, then press FF
g (B).
4. Press PLAY B(o) or STOP C (p)
to select ENGLISH.
5. Press DISPLAY/STATUS/EXIT.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 30
30 VCR On-Screen Status Displays
A status display will appear when you press
DISPLAY/STATUS/EXIT or certain function buttons.The contents
of the status display will vary.To choose the status display mode,
follow the steps below.
G Before you begin, place the DVD/VCR inVCR mode. Press
OUTPUT SELECT so the greenVIDEO light appears on the
front of the DVD/VCR. PressVCR/TV so the greenVCR/TV
light appears on the front of the DVD/VCR.
Receiving,
Recording
Mode
If you select STATUS ON and COUNTER ONLY ON:
G Whenever you press STOP C (p) or PLAY B (o) to stop or
start tape playback, the status display will appear for five sec-
onds.After five seconds, only the real-time tape counter will
remain on the screen.You must press DISPLAY/STATUS/EXIT to
remove it. Portions of the status display also may appear when
you press other function buttons.
Channel
Tape
status
Time
STOP
TV STEREO
12:00 AM
CH10
STEREO
2ND AUD
M 1:23:45 HIFI
If you select STATUS ON and COUNTER ONLY OFF:
G Whenever you press STOP C (p) or PLAY B (o) to stop or
start tape playback, the status display will appear for five sec-
onds. Portions of the status display also may appear when you
press other function buttons.
SLP
Audio
Out
Mode
Tape
Speed
If you select STATUS OFF:
G The status display will not appear when you press function but-
tons.You must press DISPLAY/STATUS/EXIT to see the status
display.
Counter,
Counter
Memory
MTS
Broadcast
PressVCR, then press DISC/MENU.
1
Available
Press PLAY B (o) or STOP C (p) to selectVCR
SET UP, then press FF g (B).
2
Press PLAY B (o) or STOP C (p) to select ON
SCREEN MODE, then press FF g (B).
3
Press PLAY B (o) or STOP C (p) to select STA-
TUS, then press FF g (B) so ON or OFF appears
4
beside STATUS.
SELECT op CHOOSE
B
→ STATUS
COUNTER ONLY
[ON]
[OFF]
TO END PUSH EXIT
If you set STATUS to OFF, go to step 6. If you set
STATUS to ON, press PLAY B (o) or STOP C (p)
to select COUNTER ONLY, then press FF g (B)
so OFF or ON appears beside it.
Helpful Hints
5
6
• You may not access a status display
when viewing a still picture, during
slow motion playback, or during for-
ward or reverse searching.
• The status display may not appear if
a weak channel is selected and
BLUE BACKGROUND is OFF.
Details are on page 47.
Press DISPLAY/STATUS/EXIT.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 31
Video CassetteTape Recording 31
VCR
Turn on the TV.
1
Read and follow the steps below to record a television program
onto a video cassette tape. Before you begin, make sure the
DVD/VCR is inVCR mode. Press OUTPUT SELECT so the green
VIDEO light appears on the front of the DVD/VCR.
Insert a tape in the
DVD/VCR.
2
POWER
Turn on theTV and set it to channel 3 or 4, whichev-
MARKER
er channel the CH3/CH4 switch on the back of the
1
SETUP
AUDIO
SUBTITLE
ANGLE
DVD/VCR is set to. Or, if you connected the DVD/VCR to
the TV using audio and video cables, select the correct
REC/OTR
REPEAT
REPEAT
A-B
audio and video in channel at the TV. Details are on page 11.
CHANNEL/SKIP
CLEAR
6
5
TITLE
MODE
RETURN
Insert a tape with its record tab intact into the cas-
sette compartment of the DVD/VCR. If tape playback
OUTPUT SELECT
2
3
4
DVD
DISC
VCR
OK
begins, press STOP C (p).
3
4
MENU
If theVCR/TV light appears on the front of the DVD/VCR,
go to step 4. If theVCR/TV light does not appear,
pressVCR, then pressVCR/TV once.
STOP
PLAY
8
REW
FF
Press SPEED until the desired tape speed (SP or
PAUSE
SLP) appears briefly on the screen. (Details about tape
7
speed are on page 36.)
TIMER SET
VCR/TV
1
4
7
2
3
6
9
5
8
0
Press CHANNEL/SKIP j/i (p/o) or the
MEMORY
SPEED
SLOW
Number buttons to select theTV channel to be
5
5
6
7
recorded.
+
10
SEARCH MODE DISPLAY ZOOM
Press REC/OTR once to start recording. The red REC
light will appear on the front of the DVD/VCR.
TIME SEARCH STATUS/EXIT
To pause the recording, press PAUSE k once. The
red REC light will flash. To resume recording, press
REC/OTR or press PAUSE k again. The red REC light
will come on again.
To stop recording, press STOP C (p).
Helpful Hints
8
• If you press REC/OTR when there is
not a tape in the DVD/VCR, NO
CASSETTE will flash on the screen.
• If you press REC/OTR while a tape
without a record tab is in the
DVD/VCR, the DVD/VCR will eject
the tape and PROTECTED CAS-
SETTE CANNOT RECORD will flash
on the screen.
• Other recording options are on
pages 32-38.
• You can change the tape speed dur-
ing a recording, but some distortion
will appear on the tape.
Recording Prevention
Video Cassettes have record tabs to ensure that recordings are
not accidentally erased.
To prevent recording, break off the tab with a
screwdriver.
1
2
To allow recording, cover the hole with clear tape.
Remove the
Cover the
tab to prevent
hole to allow
recording.
• The DVD/VCR will record in a preset
volume.
recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 32
32 Recording One Channel/Watching Another
VCR
G Before you begin, place the DVD/VCR inVCR mode. Press
OUTPUT SELECT so the greenVIDEO light appears on the
front of the DVD/VCR. PressVCR/TV so the greenVCR/TV
light appears on the front of the DVD/VCR.
POWER
MARKER
SETUP
AUDIO
SUBTITLE
ANGLE
REC/OTR
REPEAT
REPEAT
A-B
PressVCR, then press REC/OTR to record the cur-
CHANNEL/SKIP
CLEAR
1
rentTV channel. Details are on page 31.
1
TITLE
MODE
RETURN
PressVCR/TV once to put the DVD/VCR inTV posi-
OUTPUT SELECT
DVD
DISC
VCR
OK
tion. TheVCR/TV light will disappear from the front of the
2
DVD/VCR.
MENU
Use theTV remote control to select the channel
you want to watch at theTV.
STOP
PLAY
3
4
REW
FF
6
To return to the channel being recorded, use theTV
PAUSE
remote control to select channel 03 or 04 at theTV
(the channel to which the CH3/CH4 switch on the back of
TIMER SET
VCR/TV
1
4
7
2
3
6
9
the DVD/VCR is set). Or, if you connected the DVD/VCR
to the TV using audio and video cables, select the correct
audio and video in channel at the TV. Details are on page 11.
5
8
0
MEMORY
SPEED
SLOW
PressVCR/TV on the DVD/VCR remote control to
+
10
SEARCH MODE DISPLAY ZOOM
put the DVD/VCR inVCR position. TheVCR/TV light
5
will appear on the front of the DVD/VCR.The channel
TIME SEARCH STATUS/EXIT
being recorded will appear on the TV screen.
Press STOP C (p) to stop the recording.
2,5
6
Select the channel you
want to watch at the TV.
3
4
Select channel 03
or 04 at the TV.
Helpful Hint
• If you use a Cable Box or Direct
Broadcast System hookup, you
may not be able to watch one
channel while recording another.
See pages 9-10 for details.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 33
One-Touch Recording 33
VCR
One-Touch Recording (OTR) lets you set an immediate timed
recording 30 minutes to eight hours long. Before you begin:
G Place the DVD/VCR inVCR mode. Press OUTPUT SELECT so
the greenVIDEO light appears on the front of the DVD/VCR.
G Place the DVD/VCR inVCR position. PressVCR/TV so the green
VCR/TV light appears on the front of the DVD/VCR.
POWER
MARKER
SETUP
AUDIO
SUBTITLE
ANGLE
REC/OTR
REPEAT
REPEAT
A-B
G Set up the TV channels at the DVD/VCR. Details are on page 24.
G Select a recording speed (SP, SLP) with the SPEED button.
G Put a tape in the cassette compartment of the DVD/VCR. Make
sure the tape’s record tab is intact and the tape is long enough
to record the program(s).
G If the end of a tape is reached during an OTR, the DVD/VCR
will eject the tape.The DVD/VCR will switch to DVD mode
immediately, and the TIMER light will blink.To let the OTR con-
tinue, insert another tape in the DVD/VCR.
CHANNEL/SKIP
CLEAR
2
3
1
TITLE
MODE
RETURN
OUTPUT SELECT
DVD
DISC
VCR
OK
MENU
STOP
PLAY
To return toVCR mode, press TIMER on the front of the
DVD/VCR to cancel the OTR, then press OUTPUT SELECT so
the greenVIDEO light appears on the front of the DVD/VCR.
REW
FF
PAUSE
TIMER SET
VCR/TV
1
4
2
3
6
9
PressVCR, then press CHANNEL/SKIP j/i
(p/o) or the Number buttons to select the channel
5
8
0
1
2
MEMORY
SPEED
SLOW
you want to record.
7
+
Press REC/OTR repeatedly until the desired record-
10
SEARCH MODE DISPLAY ZOOM
ing length (30 minutes to eight hours) appears on
the screen. Recording will begin immediately.The REC
TIME SEARCH STATUS/EXIT
light and the TIMER light will appear on the front of the
DVD/VCR.
OTR (0:30)
CH12
Helpful Hints
• To check the time remaining for an
OTR, press DISPLAY/STATUS/EXIT.
• To change the recording length while
an OTR is in progress, press
REC/OTR until the desired length
appears on the screen.
• You can begin an OTR when anoth-
er recording is paused.
• You cannot pause an OTR.
To stop an OTR before recording is finished, press
STOP C (p).
3
To cancel the OTR but continue recording, press REC/OTR
repeatedly until REC appears in the upper left corner of
the TV screen. (STATUS must be ON. See page 30 for
details.) The REC light will remain on the front of the
DVD/VCR, but the TIMER light will disappear.
• If the preset time for a timer
recording comes up during an OTR,
the OTR has priority.A message will
remind you when the timer record-
ing was scheduled to begin.You may
let the OTR continue; the timer
recording will not take place. Or,
press STOP C (p) to stop the OTR
and pressTIMER SET immediately.
The timer recording will take place
if you pressTIMER SET before the
timer recording’s scheduled start
time.
When the OTR finishes, if no timer recordings are set,
the TIMER light will blink.The DVD/VCR will switch to
DVD mode automatically.To return toVCR mode, press
TIMER SET to turn off the TIMER light, then press OUT-
PUT SELECT so the greenVIDEO light appears on the
front of the DVD/VCR.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 34
34 Timer Recording
VCR
Follow the steps below to program your DVD/VCR to record TV
programs while you’re away from home. Before you begin:
G Set up the TV channels at the DVD/VCR. Details are on page 24.
G Set the clock. If the clock is not set, CLOCK MUST BE SET will
appear on the TV screen briefly after you select PROGRAM, fol-
lowed by theVCR menu. Follow the directions on page 27 to
set theVCR’s clock.
G Put a tape in the cassette compartment of the DVD/VCR. Make
sure the tape’s record tab is intact and the tape is long enough
to record the program(s).
POWER
MARKER
SETUP
AUDIO
SUBTITLE
ANGLE
REC/OTR
REPEAT
REPEAT
A-B
CHANNEL/SKIP
CLEAR
TITLE
MODE
RETURN
G Press OUTPUT SELECT so the greenVIDEO light appears on
the front of the DVD/VCR.
G PressVCR/TV so the greenVCR/TV light appears on the front
of the DVD/VCR.
OUTPUT SELECT
DVD
DISC
VCR
OK
1
MENU
Do each step within 60 seconds of the previous step.
STOP
PLAY
2,3
PressVCR, then press DISC/MENU.
REW
FF
PAUSE
1
2
SELECT op CHOOSE
B
TIMER SET
VCR/TV
→ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
1
4
7
2
3
6
9
5
8
0
MEMORY
SPEED
SLOW
TO END PUSH EXIT
+
10
SEARCH MODE DISPLAY ZOOM
Press PLAY B (o) or STOP C (p) to select PRO-
GRAM, then press FF g (B).
TIME SEARCH STATUS/EXIT
SELECT op CHOOSE
B
→ ONCE
DAILY
WEEKLY
PROGRAM REVIEW
TO END PUSH EXIT
Press PLAY B (o) or STOP C (p) to select a
ONCE, DAILY, or WEEKLY recording.Then, press
FF g (B).
G ONCE: The DVD/VCR will record a TV program on any
day you choose, up to 12 months away.
G DAILY: The DVD/VCR will record the same channel
every day from Monday to Friday – starting at the same
time and recording for the same length of time.
G WEEKLY: The DVD/VCR will record the same channel
on the same day, at the same time, and for the same
length of time every week.
3
Daily
Recording
(example)
DAILY PROGRAM (MON-FRI)
Helpful Hint
PROGRAM -1 2 3 4 5 6 7 8-
• To make a correction while pro-
gramming a timer recording, press
CLEAR until the cursor is flashing
on the item you want to change.
Then enter the correct information.
SELECT PROGRAM NUMBER
TO END PUSH EXIT
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 35
Timer Recording (cont’d) 35
Use the Number buttons (1-8) to select a slot in
which to store the timer recording. There are eight
slots. Numbers for open slots will flash on the screen.
NOTE: If you enter a number for a slot that has already been
used to store a timer recording, PREVIOUSLY SET PROGRAM will
appear on the screen briefly. Information about the program in
that slot will appear on the screen. If this happens, press DIS-
PLAY/STATUS/EXIT, then select another number.
4
5
4-7
POWER
MARKER
SETUP
AUDIO
SUBTITLE
ANGLE
REC/OTR
REPEAT
REPEAT
A-B
CHANNEL/SKIP
CLEAR
TITLE
MODE
RETURN
Use the Number buttons to enter theTV channel
you want to record.
OUTPUT SELECT
DVD
DISC
VCR
OK
G Cable TV Users, enter channel numbers as a two-digit
number for the quickest results. For example, to select
channel 6, press 0,6. If you only press the Number 6 but-
ton, channel 6 will be selected after a brief delay. There
also may be a brief delay when you select channels 10, 11,
and 12. If you want to select channels 100 and above,
enter channel numbers as a three-digit number. For
example, to select channel 117, press 1, 1, 7.
MENU
STOP
PLAY
REW
FF
PAUSE
G Antenna Users, enter channel numbers as a two-digit
number for the quickest results. For example, to select
channel 5, press 0,5. If you only press the Number 5 but-
ton, channel 5 will be selected after a brief delay.You may
only select channels 2-69.
G If you are recording from line input, press 0,0 to select
AV REAR. See Helpful Hints below.
TIMER SET
VCR/TV
1
4
7
2
3
6
9
5
8
0
MEMORY
SPEED
SLOW
+
10
SEARCH MODE DISPLAY ZOOM
G If you are using a Cable Box/DBS, select the Cable
Box/DBS output channel (03 or 04). Set the Cable
Box/DBS to the channel you want to record. Leave the
Cable Box/DBS on for the timer recording. Details
are on page nine.
TIME SEARCH STATUS/EXIT
Press two Number buttons for the hour you want
the recording to begin. Press two Number buttons
for the minute you want the recording to begin.
Press 1 for AM or 2 for PM. For example, for 9:30 PM,
press 09, 30, 2.
6
7
ONE TIME PROGRAM
PROGRAM
CHANNEL
TIME ON
1
10
– – : – –
Helpful Hints
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
• Entries that do not match the
DVD/VCR’s clock or calendar will
cause a question mark to appear
on the screen.
Follow the instructions in step 6 to enter the record-
ing’s stop time. (AM or PM will be set automatically.)
• If you are recording from line input,
connect the audio and video cables
to the AUDIO IN andVIDEO IN
jacks on the back of the DVD/VCR.
(Please see illustration on page 38.)
• The +10 Number button has no
effect inVCR mode, so do not use it
to enterTV channel numbers at
step 5.
ONE TIME PROGRAM
PROGRAM
CHANNEL
TIME ON
TIME OFF
1
10
09:30 PM
– – : – –
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
Instructions continue on page 36.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 36
36 Timer Recording (cont’d)
POWER
MARKER
Press the Number 1 button to record in SP speed
or the Number 2 button to record in SLP speed.
(See the chart below.)You cannot use the SPEED button at
this time.
SETUP
AUDIO
SUBTITLE
ANGLE
8
9
REC/OTR
REPEAT
REPEAT
A-B
CHANNEL/SKIP
CLEAR
ONE TIME PROGRAM
PROGRAM
CHANNEL
TIME ON
TIME OFF
REC SPEED
SP=1 SLP=2
1
10
09:30 PM
11:00 PM
SLP
TITLE
MODE
RETURN
OUTPUT SELECT
DVD
DISC
VCR
OK
MENU
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
STOP
PLAY
Press two Number buttons for the month and two
Number buttons for the day you want to record the
program. For example, for July 10, 2002, press 07, 10.The
day of the week and the year will appear automatically. (You
cannot program the DVD/VCR to record more than one
year in advance.)
REW
FF
PAUSE
TIMER SET
VCR/TV
8
9
1
4
7
2
3
6
9
11
5
8
0
ONE TIME PROGRAM
MEMORY
SPEED
SLOW
PROGRAM
CHANNEL
TIME ON
TIME OFF
REC SPEED
START DATE
1
10
09:30 PM
11:00 PM
SLP
07/10/02
WED.
+
10
SEARCH MODE DISPLAY ZOOM
TIME SEARCH STATUS/EXIT
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
10
Helpful Hints
Press DISPLAY/STATUS/EXIT. PROGRAM WAS
COMPLETED/PLEASE PUSH TIMER-SET FOR TIMER
RECORDING will appear on the screen briefly. (If PRO-
GRAM NOT COMPLETED appears, try again from step 1.)
• When all timer recordings are finished,
theTIMER light will flash.To use the
DVD/VCR again as usual, pressTIMER
SET to disable the flashingTIMER light,
then pressVCR/TV to selectVCR posi-
tion.The greenVCR/TV light will appear.
Press OUTPUT SELECT to chooseVCR
or DVD mode, then continue with other
features as described in this manual.
• When timer recordings are set, the
TIMER light will appear.To use the
DVD/VCR as usual until time for the
recording, press theTIMER SET button
so that theTIMER light disappears.
PressVCR/TV to chooseVCR position.
TheVCR/TV light will appear. Press
OUTPUT SELECT to chooseVCR or
DVD mode, then continue with other
features as described in this manual.
10
11
PressTIMER SET. The TIMER light will appear on the
front of the DVD/VCR.The DVD/VCR will be in DVD
mode.TheVCR/TV light will disappear, meaning the
DVD/VCR is in TV position.
If the timer recording will take place several hours or days
from now, you may use the DVD/VCR until time for the
recording. (See Helpful Hints at right.) Press TIMER SET a
few minutes before the recording starts.
If you forget to press TIMER SET, PLEASE PUSH TIMER-SET
FOR TIMER RECORDING flashes on your TV screen two
minutes before a timer recording starts. Press CLEAR to
remove the message, then press TIMER SET.
Tape Speeds
Cassette type/Playback Time
This chart shows the recording/playback time for
three types of video cassettes (T160,T120, and
T60).There are three playback speeds: SP, LP, and
SLP.You can record in SP or SLP speed.You can-
not record in LP speed.
Tape Speed
SP (standard play)
T160
T120
T60
2 hrs.
40 mins.
2 hrs.
1 hr.
LP (long play)
(playback only)
5 hrs.
4 hrs.
6 hrs.
2 hrs.
3 hrs.
20 mins.
The slower the tape speed, the more recording you
can put on a tape. SLP is the slowest tape speed.
SLP (super long play)
8 hrs.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 37
Timer Recording (cont’d) 37
Checking or CancellingTimer Recordings
G Before you begin, place the DVD/VCR inVCR mode.
Press OUTPUT SELECT so the greenVIDEO light appears on
the front of the DVD/VCR.
2-4
POWER
MARKER
SETUP
AUDIO
SUBTITLE
ANGLE
With the DVD/VCR on and inVCR mode and inVCR posi-
tion (pressVCR/TV so the greenVCR/TV light appears on
REC/OTR
REPEAT
REPEAT
A-B
1
the front of the DVD/VCR), pressVCR, then press
CHANNEL/SKIP
CLEAR
DISC/MENU.
TITLE
MODE
RETURN
5
1
OUTPUT SELECT
Press PLAY B (o) or STOP C (p) to select PRO-
GRAM, then press FF g (B).
DVD
DISC
VCR
OK
2
3
MENU
Press PLAY B (o) or STOP C (p) to select PRO-
GRAM REVIEW, then press FF g (B). The timer
recording information for the program in the lowest num-
bered slot will appear on the screen. If no timer recordings
are set, nothing will happen when you press FF g (B).
STOP
PLAY
REW
FF
PAUSE
TIMER SET
VCR/TV
Press FF g (B) repeatedly to review all pro-
1
4
7
2
3
6
9
grammed timer recordings. If you don’t press FF
g
4
5
8
0
(B) within 10 seconds, the DVD/VCR will automatically
display information about the next programmed timer
recording.This will continue until all timer recordings have
been displayed.Then the menu will disappear.
MEMORY
SPEED
SLOW
+
10
SEARCH MODE DISPLAY ZOOM
To cancel the timer recording displayed, press
CLEAR. Either the display will disappear or information
about other timer recordings will appear. If you do not
press any other buttons, the display will disappear after all
timer recordings have been displayed.
5
6
Helpful Hints
• CLASH may flash on the screen when
you finish setting a timer recording.
The timer recording you just tried to
program overlaps another timer
recording.The timer recording you
were trying to set will not occur.You
may cancel the other overlapping
timer recording.
Repeat steps 1-4 to make sure you have cleared the
correct timer recording.
• To stop a started timer recording,
press STOP/EJECT orTIMER on the
front of the DVD/VCR.
• Power failures will erase timer record-
ings.
• If the preset time for a timer record-
ing comes up during an OTR, the OTR
has priority.A message will remind
you when the timer recording was
scheduled to begin.You may let the
OTR continue; the timer recording will
not take place. Or, press STOP
(p) to stop the OTR and press
C
TIMER SET immediately.The timer
recording will take place if you press
TIMER SET before the timer record-
ing’s scheduled start time.
See page 76 for more hints.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 38
38 Rerecording (Tape Duplication)
VCR
The instructions on this page show you how to copy tapes.The illustration uses two DVD/VCRs. Different
VCRs may operate differently.
1. Audio cables from DVD/VCR AUDIO OUT Jacks of
DVD/VCR 1 to AUDIO IN Jacks of DVD/VCR 2
DVD/VCR 2
Recording unit
DVD/VCR 1
Playing unit
DVD/VCR
OUT
DVD/VCR
OUT
ANT-IN
COMPONENT
VIDEO OUT
IN
IN
DVD/VCR
AUDIO OUT
DVD/VCR
AUDIO OUT
L
AUDIO
R
L
AUDIO
R
Y
DIGITAL AUDIO OUT
PCM/MULTICHANNEL
S-VIDEO
OUT
ANT-OUT
L
L
Cb
COAXIAL
CH3 CH4
R
Cr
VIDEO
R
VIDEO
2.Video cable from DVD/VCR
VIDEO OUT Jack of DVD/VCR 1
toVIDEO IN Jack of DVD/VCR 2
3. RF coaxial cable from the ANT-OUT
(Antenna Out) jack of DVD/VCR 2
to the TV’s ANTENNA IN Jack
Make the connections shown above.
1
2
DVD/VCR 1 will play your tape. Put a prerecorded tape
into the cassette compartment of DVD/VCR 1. The
DVD/VCR must be inVCR mode andVCR position. (The
greenVIDEO light and the greenVCR/TV light will appear
on the front of the DVD/VCR.)
Helpful Hints
• If you use the AUDIO andVIDEO
IN Jacks on the back of DVD/VCR
2, press Number buttons 0, 0, 1 at
step 5.AV REAR will appear on the
TV screen.
• If you use the AUDIO andVIDEO In
Jacks on the front of DVD/VCR 2,
press Number buttons 0, 0, 2 at
step 5.AV FRONT will appear on
theTV screen.
• Unauthorized recording of copy-
righted television programs, video
tapes, or other materials may
infringe on the rights of copyright
owners and violate copyright laws.
• If a program has copyright protec-
tion, it may not record clearly.
• These instructions show you how to
copy tapes using two DVD/VCRs like
yours. DifferentVCRs may operate
differently.
DVD/VCR 2 will record your tape. Insert a blank tape in
the cassette compartment of DVD/VCR 2. The
DVD/VCR must be inVCR mode andVCR position. (The
greenVIDEO light and the greenVCR/TV light will appear
on the front of the DVD/VCR.)
3
Turn on theTV and set it to channel 03 or 04,
whichever channel the CH3/CH4 switch on DVD/VCR 2 is
set to.
4
5
6
7
Point the remote control at DVD/VCR 2. Press
VCR, then press the Number buttons 0, 0, 1 or 0, 0,
2. (See Helpful Hints at right.)
Press SPEED to select SP or SLP at DVD/VCR 2.
Press PLAY (VCR) on the front of DVD/VCR 1 and
REC/OTR on the front of DVD/VCR 2 at the same
time.
To stop recording, press STOP/EJECT on DVD/VCR 1, then
press STOP/EJECT on DVD/VCR 2.
• You cannot record DVD material
onto a video cassette using a single
unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 39
Repeat Play 39
VCR
Follow the steps below to play a video cassette repeatedly.
G Before you begin, place the DVD/VCR inVCR mode.
Press OUTPUT SELECT so the greenVIDEO light appears on
the front of the DVD/VCR.
POWER
MARKER
PressVCR, then press DISC/MENU.
SETUP
AUDIO
SUBTITLE
ANGLE
REC/OTR
REPEAT
REPEAT
1
SELECT op CHOOSE
B
A-B
CHANNEL/SKIP
CLEAR
→ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TITLE
MODE
RETURN
OUTPUT SELECT
DVD
DISC
VCR
OK
TO END PUSH EXIT
1
MENU
Press PLAY B (o) or STOP C (p) to select
VCR SET UP, then press FF g (B).
STOP
PLAY
2
2-4
5
SELECT op CHOOSE
B
REW
FF
PAUSE
→ REPEAT PLAY
ON SCREEN MODE
AUDIO OUT
LANGUAGE
BLUE BACKGROUND ON
OFF
TIMER SET
VCR/TV
1
4
7
2
3
6
9
5
8
0
TO END PUSH EXIT
MEMORY
SPEED
SLOW
Press PLAY B (o) or STOP C (p) to select
REPEAT PLAY.
+
10
SEARCH MODE DISPLAY ZOOM
3
4
TIME SEARCH STATUS/EXIT
Press FF g (B) so ON appears beside REPEAT
PLAY.
SELECT op CHOOSE
B
→ REPEAT PLAY
ON SCREEN MODE
AUDIO OUT
LANGUAGE
BLUE BACKGROUND ON
ON
TO END PUSH EXIT
Press DISPLAY/STATUS/EXIT. Now, when a tape has
finished playing, the DVD/VCR will rewind it and start play-
back again.
5
Helpful Hints
• To cancel Repeat Play, follow steps
1-3 above.At step 4, press FF
g
(B) so OFF appears beside REPEAT
PLAY. Press DISPLAY/STATUS/EXIT.
• The real-time tape counter memory
does not function during Repeat
Play.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 40
40 Real-TimeTape Counter Memory
VCR
Follow the steps below to reset the real-time tape counter to
zero at a tape location you want to refer to later.
G Before you begin, place the DVD/VCR inVCR mode.
Press OUTPUT SELECT so the greenVIDEO light appears on the
front of the DVD/VCR.
POWER
MARKER
SETUP
AUDIO
SUBTITLE
ANGLE
REC/OTR
REPEAT
REPEAT
A-B
PressVCR, then play, fast forward, or rewind a tape
to the location that you would like to refer to later.
CHANNEL/SKIP
CLEAR
1
Press STOP C (p) to stop the tape.
TITLE
MODE
RETURN
3
1
OUTPUT SELECT
DVD
DISC
VCR
OK
Press DISPLAY/STATUS/EXIT to see the status dis-
play.
MENU
2
STOP
1:08PM
CH10
TV STEREO
STOP
PLAY
REW
FF
PAUSE
SLP
1 : 23 : 45
HIFI
TIMER SET
VCR/TV
5
1
4
7
2
3
6
9
While the status display is on the screen, press
5
8
0
CLEAR to reset the real-time tape counter to zero.
MEMORY
SPEED
SLOW
3
STOP
1:08 PM
CH10
4
2
TV STEREO
+
10
SEARCH MODE DISPLAY ZOOM
TIME SEARCH STATUS/EXIT
SLP
0 : 00 : 00
HIFI
While the real-time tape counter is on the screen,
press MEMORY so M appears beside the counter.
4
5
STOP
1:08 PM
CH10
TV STEREO
SLP
M
0 : 00 : 00
HIFI
Helpful Hints
• The MEMORY button does not
function if REPEAT PLAY is ON.
Details are on page 39.
• To erase a real-time tape counter
memory, press MEMORY until the
M disappears from the screen.
To go to a tape location where the real-time tape
counter was reset to zero, press REW h (s) or
FF g (B) when playback is stopped.
When the tape reaches the point at which the counter was
set to zero, the tape will stop. Press PLAY B (o) to watch
the tape.
• You may only set the real-time tape
counter to zero at one location at a
time. Setting the real-time tape
counter to zero at a second location
will erase the previous zero setting.
• If you remove the tape, the counter
will reset to zero at the point at
which you last stopped playback
whenever you reinsert the tape.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 41
Time Search 41
VCR
Follow the steps below to program the DVD/VCR to search for-
ward or backward on a tape a specific length of time.There must
be a tape in the DVD/VCR.
G Before you begin, place the DVD/VCR inVCR mode. Press
OUTPUT SELECT so the greenVIDEO light appears on the
front of the DVD/VCR. PressVCR/TV so the greenVCR/TV
light appears on the front of the DVD/VCR.
POWER
MARKER
SETUP
AUDIO
SUBTITLE
ANGLE
REC/OTR
REPEAT
REPEAT
A-B
CHANNEL/SKIP
CLEAR
PressVCR, then press SEARCH MODE/TIME
SEARCH.
TITLE
MODE
RETURN
1
OUTPUT SELECT
TIME SEARCH
0:00
DVD
DISC
VCR
OK
1
MENU
STOP
PLAY
ENTER SEARCH TIME
REW
FF
PAUSE
Within 10 seconds, use the Number buttons to
TIMER SET
VCR/TV
enter the desired length of time you want to skip
3
2
1
4
7
2
3
6
9
2
forward or backward. For example, for 1 hour, 25 min-
utes, press Number buttons 1, 2, 5. Or, for five minutes,
press Number buttons 0, 0, 5.
5
8
0
MEMORY
SPEED
SLOW
+
10
SEARCH MODE DISPLAY ZOOM
Within 10 seconds, press FF g (B) or REW
h
TIME SEARCH STATUS/EXIT
(s). The DVD/VCR will skip over the specified length of
3
time, then begin playback.
Helpful Hints
• If you want to search for more than
59 minutes, you must enter the
length of time in hours and min-
utes. For example, to search forward
70 minutes, press 1,1,0 at step 2.
• You cannot do aTime Search while
recording.
• To remove theTime Search display,
press SEARCH MODE/TIME
SEARCH again.
• To cancel aTime Search that is in
progress, press STOP C (p).
• If the end of the tape is reached
during aTime Search, theTime
Search will be cancelled.The
DVD/VCR may rewind the tape.
Details are on page 43.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 42
42 Special Effects Playback
VCR
G Before you begin, press OUTPUT SELECT so the greenVIDEO
light appears on the front of the DVD/VCR.
PressVCR/TV so the greenVCR/TV light appears on the front
of the DVD/VCR.
POWER
MARKER
SETUP
AUDIO
SUBTITLE
ANGLE
Forward and Reverse Searching (SP/LP/SLP)
REC/OTR
REPEAT
REPEAT
A-B
During tape playback, press and release FF g (B)
CHANNEL/SKIP
CLEAR
or REW h (s). A fast forward or reverse picture
TITLE
MODE
RETURN
1
search will begin.
OUTPUT SELECT
DVD
DISC
VCR
OK
To return to playback, press PLAY B (o).
MENU
2
STOP
PLAY
Super High Speed Searching (LP/SLP)
REW
FF
PAUSE
During tape playback, press FF g (B) or REW
TIMER SET
VCR/TV
h (s), then press again. The DVD/VCR will now
1
4
7
2
3
6
9
1
search the tape in super high speed. Repeatedly pressing FF
g (B) or REW h (s) will switch between regular
5
8
0
MEMORY
SPEED
SLOW
and high speed searching.
+
10
To return to normal playback, press PLAY B (o).
SEARCH MODE DISPLAY ZOOM
2
TIME SEARCH STATUS/EXIT
Viewing a Still Picture
During tape playback, press PAUSE k. A still picture
will appear on the screen.
1
To release the still picture and return to playback,
press PLAY B (o) or press PAUSE k again.
2
Viewing a Slow Motion Picture
Helpful Hints
• Slow and Still modes will automati-
cally switch to Stop mode after
five minutes to protect the
DVD/VCR and the tape from dam-
age.
• SP/LP/SLP means this feature will
work with tapes recorded in
Standard Play, Long Play, or Super
Long Play.
During tape playback, press SLOW. The tape will play
in slow motion.
1
2
To release Slow mode and return to normal play-
back, press PLAY B (o) or press SLOW again.
• LP/SLP means this feature will
work with tapes recorded in Long
Play or Super Long Play. For details
about tape speed, see pages 36
and 73.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 43
Automatic Operation Features 43
VCR
The following tape playback features are available inVCR mode. (Press
OUTPUT SELECT so the greenVIDEO light is on, if necessary.)
Automatic Playback
When you put a tape in the DVD/VCR, the power will come on
automatically. If the tape’s record tab is missing, playback will begin.
If a timer recording is set and the TIMER light is flashing, the
power will not come on automatically when you insert a tape with
the record tab intact.
If a timer recording is set and the TIMER light is flashing, the
DVD/VCR will eject the tape if the record tab is missing.
Automatic Rewind, Eject
When a tape is played, fast forwarded, or recorded to its end, the
DVD/VCR will rewind the tape to the beginning, stop, then eject
the tape. If REPEAT PLAY is ON, the DVD/VCR will not eject the
tape automatically.The tape will begin to play again. Details are on
page 39.
If the real-time tape counter memory is set, the DVD/VCR will
only rewind the tape to the point at which the counter is set to
zero, then stop.The DVD/VCR will not eject the tape automatical-
ly. Details are on page 40.
Tape Eject
A tape can be ejected with the DVD/VCR power on or off (but
the DVD/VCR must be plugged in).
If a timer recording is set and the TIMER light is on, the tape can-
not be ejected.To eject the tape, you must first press TIMER SET
(or TIMER on the DVD/VCR) to cancel the timer recording, then
press STOP/EJECT to remove the tape.To reset the timer record-
ing, insert a tape, then press TIMER SET (or TIMER on the
DVD/VCR).
AutomaticTracking Adjustment
The DVD/VCR adjusts tracking automatically to give you the best
possible picture quality.With some recordings, however, you may get
a better picture using the manual tracking controls (see below).
ManualTracking
To manually adjust the tracking during normal playback and slow
motion playback of a video cassette, press CHANNEL o/p on
the DVD/VCR. (CHANNEL/SKIP j/i (p/o) on the
remote control will not adjust tracking.)
Tracking will return to Automatic Tracking Adjustment when you
press STOP C (p) or insert a tape.
You cannot manually adjust the tracking of a Still picture. However,
you may press CHANNEL o/p on the front of the DVD/VCR
to remove vertical jitter in a Still picture.
Before
After
Tracking
Adjustment
Tracking
Adjustment
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:13 PM Page 44
44 Multi-ChannelTelevision Sound
VCR
Your DVD/VCR can play tapes recorded in Hi-Fi (high fidelity) stereo, which produces a crisp, clear sound
from the left and right audio channels.Your DVD/VCR also can play tapes recorded in a second audio (usu-
ally, that means your program is recorded in a second language). Of course, your DVD/VCR will play tapes
recorded in monaural (single-source) sound as well.
Your DVD/VCR also will record a video cassette in Hi-Fi stereo or in second audio, so when you play that
tape on the DVD/VCR, it will be in stereo or second audio.
Read the directions on this page to familiarize yourself with your DVD/VCR’s stereo and second audio
setups.Then follow the directions on page 45 to record in stereo or second audio, or follow the directions
on page 46 to play tapes recorded in Hi-Fi stereo.
Understanding On-Screen Displays
When you watch TV channels through theVCR, portions of the display shown below will appear when you
press DISPLAY/STATUS/EXIT.
If 2ND AUD or STEREO appears here,
If 2ND AUD orTV STEREO appears
here, your DVD/VCR is set to receive
a second audio or stereo broadcast.
(It cannot receive both at the same
time.)
STOP
12:00 AM
CH 02
the program you’re watching is avail-
able in second audio or stereo.This
indication is not available during tape
playback.
Even though a program is available in
stereo or second audio, you still must
program the DVD/VCR to receive or
record the program. Follow the direc-
tions on page 45.
TV STEREO
STEREO
2ND AUD
SLP
1:23:45
HIFI
To record and play programs in stereo, use one of the connections shown, then follow the steps on pages
45-46.You could use the hookups shown on page 11 instead if you prefer and if your TV has right and left
Audio In jacks.
Non-stereoTV
(TV has one
Audio In jack)
StereoTV
(TV has right/left
Audio In jacks)
Stereo
Receiver
TV
OR
DVD/VCR
OUT
ANT-IN
IN
L
AUDIO
R
ANT-OUT
CH3 CH4
VIDEO
RF coaxial cable (supplied)
from DVD/VCR’s ANT-OUT
(Antenna Out) jack
Audio cables from DVD/VCR AUDIO
OUT Jacks of DVD/VCR to AUDIO IN
Jacks of Stereo Receiver andVideo cable
from DVD/VCRVIDEO OUT Jack of
DVD/VCR toTV’sVIDEO IN Jack
OR
toTV’s ANTENNA IN Jack
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 45
Multi-ChannelTelevision Sound (cont’d) 45
VCR
G Before you begin, place the DVD/VCR inVCR mode. Press
OUTPUT SELECT so the greenVIDEO light appears on the
front of the DVD/VCR. PressVCR/TV so the greenVCR/TV
light appears on the front of the DVD/VCR.
POWER
MARKER
PressVCR, then press DISC/MENU.
SETUP
AUDIO
SUBTITLE
ANGLE
REC/OTR
REPEAT
REPEAT
A-B
SELECT op CHOOSE
B
1
2
CHANNEL/SKIP
CLEAR
6
1
→ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TITLE
MODE
RETURN
5
4
OUTPUT SELECT
DVD
DISC
VCR
OK
TO END PUSH EXIT
MENU
Press PLAY B (o) or STOP C (p) to selectTUNER
SET UP, then press FF g (B).
STOP
PLAY
SELECT op CHOOSE
B
REW
FF
→ TV
ON
ON
PAUSE
CABLE TV
AUTO PROGRAMMING
ADD/DELETE CH
CH MEMORY REVIEW
TV STEREO
TIMER SET
VCR/TV
1
4
7
2
3
6
9
2-3
2ND AUDIO
TO END PUSH EXIT
5
8
0
MEMORY
SPEED
SLOW
Press PLAY B (o) or STOP C (p) to selectTV
STEREO or 2ND AUDIO.Then, press FF g (B).
ON will appear to the right of your selection.
+
10
SEARCH MODE DISPLAY ZOOM
3
TIME SEARCH STATUS/EXIT
SELECT op CHOOSE
B
TV
CABLE TV
ON
AUTO PROGRAMMING
ADD/DELETE CH
CH MEMORY REVIEW
TV STEREO
→ 2ND AUDIO
TO END PUSH EXIT
ON
Press DISPLAY/STATUS/EXIT.
4
5
6
To record, select the channel to be recorded using
CHANNEL/SKIP j/i (p/o) then go to step 6.
Helpful Hints
Press REC/OTR to start recording.
• You can only receive and record in
stereo or second audio programs
that are broadcast in stereo or sec-
ond audio.You can only play in
stereo or second audio tapes that
were recorded in stereo or second
audio. Please see page 44 to deter-
mine if the program you want to
watch/record is being broadcast in
stereo or second audio.
• If you select second audio when sec-
ond audio is not available, the
DVD/VCR will record normal audio.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 46
46 Hi-Fi Stereo Sound
VCR
Multi-Channel Television Sound system broadcasts are automatical-
ly recorded in Hi-Fi stereo.To play in Hi-Fi stereo the tapes
recorded in Hi-Fi stereo, however, follow steps 1-5 below.
G Before you begin, place the DVD/VCR inVCR mode. Press
OUTPUT SELECT so the greenVIDEO light appears on the
front of the DVD/VCR. PressVCR/TV so the greenVCR/TV
light appears on the front of the DVD/VCR.
POWER
MARKER
SETUP
AUDIO
SUBTITLE
ANGLE
REC/OTR
REPEAT
REPEAT
A-B
CHANNEL/SKIP
CLEAR
TITLE
MODE
RETURN
PressVCR, then press DISC/MENU.
OUTPUT SELECT
DVD
DISC
VCR
OK
1
1
SELECT op CHOOSE
B
MENU
→ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
STOP
PLAY
2-4
TO END PUSH EXIT
REW
FF
PAUSE
TIMER SET
VCR/TV
1
4
7
2
3
6
9
Press PLAY B (o) or STOP C (p) to selectVCR
SET UP, then press FF g (B).
5
8
0
2
3
4
5
MEMORY
SPEED
SLOW
SELECT op CHOOSE
B
→ REPEAT PLAY
ON SCREEN MODE
AUDIO OUT
LANGUAGE
BLUE BACKGROUND ON
OFF
+
10
SEARCH MODE DISPLAY ZOOM
TIME SEARCH STATUS/EXIT
TO END PUSH EXIT
5
Press PLAY B (o) or STOP C (p) to select AUDIO
OUT, then press FF g (B).
SELECT op
→ HIFI
MONO
ON
Helpful Hints
• If you want monaural audio play-
back, follow steps 1-3.At step 4,
press PLAY B (o) or STOP C (p)
to select MONO. Press
DISPLAY/STATUS/EXIT. HIFI will dis-
appear from the status display.
• All programs are automatically
recorded in both Hi-Fi stereo sound
and in monaural sound.
• The audio level of a tape recorded
in Hi-Fi stereo will differ from the
audio level of a tape not recorded in
Hi-Fi stereo.
• If you play non-Hi-Fi tapes while the
DVD/VCR is set to HIFI, HIFI will
disappear from the status display
and the tape will play in monaural
sound.
TO END PUSH EXIT
Press PLAY B (o) or STOP C (p) to select HIFI.
ON will appear to the right of HIFI on the screen.
SELECT op
→ HIFI
MONO
ON
TO END PUSH EXIT
Press DISPLAY/STATUS/EXIT.
Please see additional notes
on page 77.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 47
Blue Background 47
VCR
If you want the TV screen to be solid blue when a weak signal is
received, set BLUE BACKGROUND to ON.The screen will be
blue and the sound will be muted.
POWER
Or, if you want to receive the weak signal, set BLUE BACK-
GROUND to OFF.When you select a channel that is receiving a
weak signal, you will see and hear the static in the TV program-
ming.The channel number will not appear on the screen when you
select a weak channel.
To set BLUE BACKGROUND to ON or OFF, follow these steps.
G Before you begin, place the DVD/VCR inVCR mode. Press
OUTPUT SELECT so the greenVIDEO light appears on the
front of the DVD/VCR. PressVCR/TV so the greenVCR/TV
light appears on the front of the DVD/VCR.
MARKER
SETUP
AUDIO
SUBTITLE
ANGLE
REC/OTR
REPEAT
REPEAT
A-B
CHANNEL/SKIP
CLEAR
TITLE
MODE
RETURN
OUTPUT SELECT
DVD
DISC
VCR
OK
MENU
1
4
PressVCR, then press DISC/MENU.
STOP
PLAY
1
SELECT op CHOOSE
B
2-3
REW
FF
→ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
PAUSE
TIMER SET
VCR/TV
1
4
2
3
6
9
TO END PUSH EXIT
5
8
0
MEMORY
SPEED
SLOW
7
+
Press PLAY B (o) or STOP C (p) to selectVCR
SET UP, then press FF g (B).
10
2
3
SEARCH MODE DISPLAY ZOOM
SELECT op CHOOSE
B
TIME SEARCH STATUS/EXIT
→ REPEAT PLAY
ON SCREEN MODE
AUDIO OUT
OFF
LANGUAGE
BLUE BACKGROUND ON
TO END PUSH EXIT
Press PLAY B (o) or STOP C (p) to select BLUE
BACKGROUND.Then, press FF g (B) repeatedly
so OFF or ON appears beside BLUE BACK-
GROUND.
SELECT op CHOOSE
B
REPEAT PLAY
ON SCREEN MODE
AUDIO OUT
OFF
LANGUAGE
→ BLUE BACKGROUND ON
TO END PUSH EXIT
Press DISPLAY/STATUS/EXIT.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 48
48 Disc Menus
DVD
Using the DVD Disc Menus
Some DVDs contain menus that describe the contents of the
DVD or allow you to customize DVD playback. For example, the
menu may offer choices for subtitle languages, special features, or
scene selection.To use the DVD Disc menu and select playback
features, follow these steps.
POWER
MARKER
SETUP
AUDIO
SUBTITLE
ANGLE
REC/OTR
REPEAT
REPEAT
A-B
G Before you begin, place the DVD/VCR in DVD mode.
Press OUTPUT SELECT so the red DVD light appears on the
front of the DVD/VCR.
CHANNEL/SKIP
CLEAR
TITLE
MODE
RETURN
OUTPUT SELECT
DVD
DISC
VCR
OK
Press DVD, then press DISC/MENU. The DVD’s main
1
1
Disc menu will appear.
MENU
1
Press the Arrow buttons
o
p
s
B to select an item,
2
STOP
PLAY
then press OK. Continue this process to set up all the
2
features you wish to see on the DVD.
REW
FF
PAUSE
Using theTitle Menu
POWER
Some DVDs have a Title Menu, which lists the Titles available on
the DVD. Use the Title Menu to start playback at a specific Title.
G Before you begin, place the DVD/VCR in DVD mode.
Press OUTPUT SELECT so the red DVD light appears on the
front of the DVD/VCR.
MARKER
SETUP
AUDIO
SUBTITLE
ANGLE
REC/OTR
REPEAT
REPEAT
A-B
CHANNEL/SKIP
CLEAR
TITLE
MODE
RETURN
Press DVD, then pressTITLE. The Title Menu will
OUTPUT SELECT
appear.
1
DVD
DISC
VCR
OK
If a Title menu is not available, the
symbol may appear
on the TV screen. Or, if the DVD only has a main Disc
menu as described above, it may appear when you press
TITLE.
MENU
2
STOP
PLAY
Press the Arrow buttons o p s B to select the
desiredTitle, then press OK. Playback will begin at the
Title you selected.
REW
FF
2
PAUSE
Helpful Hints
• Menus vary among DVDs. Follow
the information accompanying the
DVD.
• Not all DVDs haveTitle menus.
• Some DVDs may refer to Chapters
as “scenes.” Some DVDs may refer
to theTitle Menu as the “scene
index.”
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 49
Fast Forward/Reverse Search 49
DVD
AUDIO CD
G Before you begin, place the DVD/VCR in DVD mode. Press
OUTPUT SELECT so the red DVD light appears on the front of
the DVD/VCR.
POWER
MARKER
SETUP
AUDIO
SUBTITLE
ANGLE
REC/OTR
REPEAT
REPEAT
A-B
During playback, press DVD, then press FF g (B)
CHANNEL/SKIP
CLEAR
or REW h (s) on the remote control.
1
G
During DVD playback, pressing FF
g
(B) or REW
h
TITLE
MODE
RETURN
(s) repeatedly will forward or reverse the picture at
OUTPUT SELECT
twice, eight times, 30 times, or 60 times the normal play-
back speed.
DVD
DISC
VCR
OK
1
MENU
An
briefly on the TV screen to indicate reverse searching. Or,
x2, x8, x30, or x60 will appear briefly
h
x2,
h
x8,
h
x30, or
h
x60 will appear
g
g
g
g
STOP
PLAY
on the TV screen to indicate fast forward searching.
Sound will be muted during searching.
REW
FF
2
G During Audio CD playback, you may search forward or
backward only at 16 times the normal playback speed.An
hx16 or gx16 will appear briefly on the TV screen.
Pressing FF g (B) or REW h (s) repeatedly will
not affect the speed of the search. Sound will be inter-
mittent during searching on an Audio CD.
PAUSE
TIMER SET
VCR/TV
1
4
7
2
3
6
9
5
8
0
MEMORY
SPEED
SLOW
G
Use FF
g
(B) for a forward search. Press REW
h
+
10
(s) for a reverse search.
SEARCH MODE DISPLAY ZOOM
TIME SEARCH STATUS/EXIT
Example: Playing a DVD in
reverse at twice the normal
playing speed.
E
x2
Example: Fast forwarding
a DVD at twice the regular
playback speed.
D
x2
Example: Fast forwarding an Audio CD
at 16 times the regular playback speed.
D
x16
Press PLAY B (o) to return to normal playback.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 50
50 SpecificTitle/Chapter Playback, SpecificTime Playback
DVD
OUTPUT SELECT
SpecificTitle/Chapter Playback
DVD
DISC
VCR
G Before you begin, place the DVD/VCR in DVD mode.
Press OUTPUT SELECT so the red DVD light appears on the
front of the DVD/VCR.
MENU
OK
STOP
PLAY
With a DVD in the DVD/VCR, press DVD, then
press SEARCH MODE/TIME SEARCH once. The
REW
FF
1
2
3
PAUSE
Title/Chapter Search display will appear on the TV screen.
TIMER SET
VCR/TV
o
To select theTitle, press
to select theTitle space
1
4
7
2
3
6
9
(besideTT), then press the Number buttons to
enter theTitle number. The Chapter space (beside CH)
will be selected automatically.
2-3
5
8
0
MEMORY
SPEED
SLOW
+
10
Within 30 seconds, press the Number buttons to
enter the Chapter number. In a few seconds, the
selected Chapter will start playing.
SEARCH MODE DISPLAY ZOOM
TIME SEARCH STATUS/EXIT
1
TT:4 / 4
CH:12/17
OUTPUT SELECT
DVD
AUDIO CD
DVD
DISC
VCR
1
SpecificTime Playback
MENU
OK
G Before you begin, place the DVD/VCR in DVD mode.
Press OUTPUT SELECT so the red DVD light appears on the
front of the DVD/VCR.
STOP
PLAY
REW
FF
During playback, press DVD, then press SEARCH
PAUSE
MODE/TIME SEARCH repeatedly so the Time Search
1
display appears on the TV screen.
TIMER SET
VCR/TV
1
4
7
2
3
6
9
TIME
:
:
– –
–
TOTAL 1:29:
00
5
8
0
2
MEMORY
SPEED
SLOW
+
10
SEARCH MODE DISPLAY ZOOM
TIME SEARCH STATUS/EXIT
Within 30 seconds, use the Number buttons to
enter the Disc time at which you want playback to
begin. Enter the time in hours, minutes, and seconds.
Within a few seconds, playback will start at the specified
time.
G Example: 1 hour, 23 minutes, and 30 seconds
1 ¡ 2 ¡ 3 ¡ 3 ¡ 0
2
G Make sure the time you enter is within the total time of
the current Title or Track. If it is not, the TIME space will
clear and playback will continue at its current point.
G If you make a mistake, press CLEAR to erase all the infor-
mation in the TIME space. Enter the correct information.
Helpful Hints
• Title/Chapter playback is not avail-
able with some DVDs.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 51
SpecificTrack Playback 51
AUDIO CD
There are three ways to begin playback on an Audio CD at a specific
Track: Use the Number buttons, the SEARCH MODE/TIME
SEARCH button, or CHANNEL/SKIP j/i (p/o).
G Before you begin, place the DVD/VCR in DVD mode.
Press OUTPUT SELECT so the red DVD light appears on the
front of the DVD/VCR.
A-C
POWER
MARKER
SETUP
AUDIO
SUBTITLE
ANGLE
A
REC/OTR
REPEAT
REPEAT
A-B
Using the Number Buttons to Select aTrack
During playback or when playback is stopped, press DVD,
then press the Number buttons to enter the desiredTrack
number. Playback will start at the selectedTrack.
For single-digitTracks (1-9), press a single Number button.
ForTracks 10 and above, press the +10 button so the Search display
appears on theTV screen. Press the Number button of the first digit,
then press the Number button of the second digit.
For example, to playTrack 26, press +10, then Number 2, then
Number 6.
CHANNEL/SKIP
CLEAR
C
TITLE
MODE
RETURN
OUTPUT SELECT
DVD
DISC
VCR
OK
MENU
STOP
PLAY
If you enter aTrack number that is not available on the Disc, play-
back will not begin (or the current Track will continue to play).The
space besideTR will clear automatically in the Search display.
REW
FF
PAUSE
TIMER SET
VCR/TV
1
4
2
3
6
9
5
8
0
A-B
MEMORY
SPEED
SLOW
B
7
+
Using SEARCH MODE/TIME SEARCH to Select aTrack
Press DVD, then press SEARCH MODE/TIME SEARCH
once so theTrack Search display appears.Within 30 sec-
onds, press the Number buttons to select theTrack number
you desire. Playback will begin at the selectedTrack. For a single-
digitTrack (1-9), enter a zero first. For example, to play Track 5, press
0, 5.
10
SEARCH MODE DISPLAY ZOOM
TIME SEARCH STATUS/EXIT
B
C
Using CHANNEL/SKIP j/i (p/o) to Select aTrack
During playback, press DVD, then press CHANNEL/SKIP
G (o) to skip the currentTrack and move to the next
Track. The Track number will appear briefly on the DVD/VCR dis-
play panel.
During playback, press CHANNEL/SKIP H (p) to return
to the beginning of the currentTrack or to go to previous
Tracks. The Track number will appear briefly on the DVD/VCR
display panel.
Helpful Hints
• You cannot use CHANNEL/SKIP
i (o) to go from the lastTrack
on the disc to the firstTrack.
• If you press CHANNEL/SKIP
j/i (p/o) when playback
is paused, the selectedTrack will
begin playing automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 52
52 Paused and Step-by-Step Playback, Resuming Playback
DVD
AUDIO CD
Paused and Step-by-Step Playback
POWER
MARKER
During playback, press DVD, then press PAUSE k.
Play will pause and the sound will be muted.
SETUP
AUDIO
SUBTITLE
ANGLE
REC/OTR
REPEAT
REPEAT
A-B
1
CHANNEL/SKIP
CLEAR
When playing a DVD, press PAUSE k repeatedly to
TITLE
MODE
RETURN
see the picture advance one frame (or step) at a
2
time. The sound will remain mute. Pressing PAUSE
k.repeatedly during Audio CD playback will have no effect.
OUTPUT SELECT
DVD
DISC
VCR
OK
1
MENU
Press PLAY B (o) to resume playback.
3
STOP
PLAY
3
1-2
REW
FF
PAUSE
DVD
AUDIO CD
POWER
MARKER
Resuming playback
SETUP
AUDIO
SUBTITLE
ANGLE
Press DVD, then press STOP C (p) during disc play-
REC/OTR
REPEAT
REPEAT
A-B
back. In a few seconds, the following Resume message will
CHANNEL/SKIP
CLEAR
1
2
appear on the TV screen.
TITLE
MODE
RETURN
OUTPUT SELECT
DVD
DISC
VCR
OK
Press 'PLAY' to play from here.
To play the beginning, press 'STOP' first
and then 'PLAY'.
1
MENU
STOP
PLAY
2
REW
FF
Press PLAY B (o). In a few seconds, playback will
resume from the point at which playback stopped last.You
can resume play at the same point even if you turn off the
DVD/VCR, then turn it on again later. However, opening the
disc tray will cancel the Resume feature.
PAUSE
Helpful Hint
• To cancel resume playback and
start playing the disc from the
beginning, press STOP C (p)a sec-
ond time while playback is stopped.
The Stop Symbol (C) will appear
briefly on theTV screen. Press PLAY
B (o)to start playing the disc from
the beginning.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 53
Repeat,A-B Repeat 53
DVD
Repeat
AUDIO CD
POWER
MARKER
G Before you begin, place the DVD/VCR in DVD mode. Press
OUTPUT SELECT so the red DVD light appears on the front of
the DVD/VCR.
SETUP
AUDIO
SUBTITLE
ANGLE
REC/OTR
REPEAT
REPEAT
A-B
CHANNEL/SKIP
CLEAR
During disc playback, press DVD, then repeatedly
TITLE
MODE
RETURN
press REPEAT until the repeat mode you want
1
appears on the TV screen as shown in the examples below.
OUTPUT SELECT
On a DVD, press REPEAT repeatedly to select REPEAT
[CHAPTER], REPEAT [TITLE], or REPEAT [OFF]. Selecting
a new Chapter or Title will cancel repeat playback.
On an Audio CD, press REPEAT repeatedly to select
REPEAT [TRACK], REPEAT [ALL], or REPEAT [OFF].
Selecting a new Track will cancel repeat playback.
DVD
DISC
VCR
OK
1
MENU
STOP
PLAY
REW
FF
REPEAT
[CHAPTER]
REPEAT
[TRACK]
PAUSE
Example: Repeat a
DVD Chapter
Example: Repeat an
Audio CD Track
DVD
A-B Repeat
AUDIO CD
2-4
POWER
Follow these steps to play a section of a Disc repeatedly.
G Before you begin, place the DVD/VCR in DVD mode.
Press OUTPUT SELECT so the red DVD light appears on the
front of the DVD/VCR.
MARKER
SETUP
AUDIO
SUBTITLE
ANGLE
REC/OTR
REPEAT
REPEAT
A-B
CHANNEL/SKIP
CLEAR
Press DVD, then press PLAY B (o) to play the Disc
TITLE
MODE
RETURN
to the point at which you want repeated playback
1
2
OUTPUT SELECT
to begin.
DVD
DISC
VCR
OK
1
Press A-B REPEAT to set the starting point (A).
MENU
REPEAT [A -] will appear on the TV screen.
REPEAT
[A –
]
STOP
PLAY
REW
FF
PAUSE
Helpful Hints
Play or fast forward the Disc to the point at which
you want repeated playback to end, then press A-B
REPEAT again. REPEAT [A-B] will appear on the TV.
The section will begin to play repeatedly.
• Repeat playback and A-B Repeat
are not available with all Discs.
• The entire A-B Repeat section must
be within a singleTitle orTrack. If
you do not enter Point B before the
end of theTrack orTitle is reached,
the end of theTrack orTitle will
become Point B automatically.
• Point B must be later on the Disc
than Point A.
3
4
REPEAT
[A–B]
• Pressing STOP C (p) will cancel
A-B Repeat.
To cancel A-B Repeat, press A-B REPEAT so REPEAT
[OFF] appears on theTV. Regular playback will resume.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 54
54 Markers
DVD
AUDIO CD
Use Markers to remember your favorite places on a disc.To set
the Markers, follow these steps.
4
G Before you begin, place the DVD/VCR in DVD mode. Press
OUTPUT SELECT so the red DVD light appears on the front of
the DVD/VCR.
POWER
MARKER
SETUP
AUDIO
SUBTITLE
ANGLE
Play the Disc to within 30 seconds prior to the point at
which you want to set the Marker. During playback,
REC/OTR
REPEAT
REPEAT
A-B
1
press DVD, then press MARKER. The Markers will
appear at the top of the TV screen for 30 seconds.
CHANNEL/SKIP
CLEAR
TITLE
MODE
RETURN
1 2 3 4 5 AC
NOT SET
OUTPUT SELECT
DVD
DISC
VCR
OK
3-4
2,4
1
MENU
STOP
REW
PLAY
FF
PAUSE
Within 30 seconds, press s or B to select 1, 2, 3, 4,
or 5. Make sure “NOT SET” appears beneath the number.
TIMER SET
VCR/TV
2
3
1
4
7
2
3
6
9
Let the Disc continue to play to the point at which
5
8
0
MEMORY
SPEED
SLOW
you want to set the Marker (up to 30 seconds).
When the Disc reaches the point you want to
+
10
remember, press OK. The Title and elapsed playing time
(DVD) or Track and its elapsed playing time (Audio CD)
will appear in the display.
SEARCH MODE DISPLAY ZOOM
TIME SEARCH STATUS/EXIT
1 2 3 4 5 AC
1 2 3 4 5 AC
_
TT01 0:12:01
_
TR 05 0:00:41
To return to the Marker later, press MARKER dur-
ing playback. Press s or B to choose the Marker
you want, then press OK. Disc play will continue from
the marked point.
4
Helpful Hints
• Opening the disc tray or turning
off the DVD/VCR will erase all the
Markers.
• To erase a single Marker, press
MARKER, then press s or B to
select the Marker number. Press
CLEAR. NOT SET will appear on
the display. Press RETURN or
MARKER to remove the display.
• To erase all the Markers, press
MARKER, then press B repeatedly
to select AC. Press OK. Press
MARKER to remove the display.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 55
Subtitles, Camera Angles 55
DVD
Subtitles
POWER
MARKER
You can select a language for DVD subtitles during playback.You
can select only languages that are available on the DVD.
G Before you begin, place the DVD/VCR in DVD mode. Press
OUTPUT SELECT so the red DVD light appears on the front of
the DVD/VCR.
SETUP
AUDIO
SUBTITLE
ANGLE
REC/OTR
REPEAT
REPEAT
1 2
A-B
CHANNEL/SKIP
CLEAR
TITLE
MODE
RETURN
Press DVD, then press SUBTITLE during playback
OUTPUT SELECT
so the subtitle display appears on the TV screen.
DVD
DISC
VCR
1
2
MENU
OK
Within five seconds, press SUBTITLE repeatedly to
select a subtitle language. The number of available lan-
guages appears at the right of the subtitle display. In the
STOP
PLAY
example below, eight languages are available ( /8).After a
few seconds, the subtitles will appear.
REW
FF
PAUSE
To turn off Subtitles, press SUBTITLE repeatedly until SUB-
TITLE OFF appears on the TV screen.
SUBTITLE 1. ENG / 8
DVD
POWER
MARKER
Camera Angles
SETUP
AUDIO
SUBTITLE
ANGLE
Some DVDs contain scenes recorded from different angles.You
may select a camera angle during playback.
G Before you begin, place the DVD/VCR in DVD mode. Press
OUTPUT SELECT so the red DVD light appears on the front of
the DVD/VCR.
1
REC/OTR
REPEAT
REPEAT
A-B
2
CHANNEL/SKIP
CLEAR
TITLE
MODE
RETURN
OUTPUT SELECT
Press DVD, then press ANGLE during playback so
the Angle display appears on theTV screen.
DVD
DISC
VCR
OK
MENU
1
2
Within five seconds, press ANGLE repeatedly to
select a different angle. The number of available angles
appears at the right of the Angle display. In this example,
eight angles are available ( /8).
Helpful Hints
• On some DVDs, you must select a
subtitle language in the Disc menu.
• If the desired language does not
appear after pressing SUBTITLE
several times, the Disc does not
have subtitles in that language.
• Opening the disc tray will cancel
your subtitle setting.
ANGLE 1 / 8
• If the Disc has multiple camera
angles,
will appear on theTV
screen.ANGLE ICON must be On.
Details are on pages 66-67.
• The camera angle will not change
if the DVD does not contain
sequences recorded from different
camera angles.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 56
56 Parental Controls Password
DVD
Parental Controls limits viewing of DVDs that exceed the limits
you set.This feature will not limit viewing if the DVD maker did
not code the DVD. So, make sure your DVDs play according to
your settings before you allow children access to the DVD/VCR.
Follow these steps to change your Parental Controls password.
G Before you begin, place the DVD/VCR in DVD mode. Press
OUTPUT SELECT so the red DVD light appears on the front of
the DVD/VCR.
POWER
MARKER
SETUP
AUDIO
SUBTITLE
ANGLE
6
5
REC/OTR
REPEAT
REPEAT
A-B
1
CHANNEL/SKIP
CLEAR
TITLE
MODE
RETURN
OUTPUT SELECT
DVD
DISC
VCR
OK
While playback is stopped, press DVD, then press
SETUP.
MENU
1
SET-UP
1.LANGUAGE
2.DISPLAY
3.AUDIO
STOP
PLAY
4.PARENTAL
REW
FF
SELECT:
EXIT
/
SET
:
OK
RETURN
PAUSE
:
SETUP CANCEL
:
TIMER SET
VCR/TV
1
4
7
2
3
6
9
Press the Number 4 button to select PARENTAL.
The SET-UP PARENTAL CONTROLS PASSWORD menu
will appear.
5
8
0
2
MEMORY
SPEED
SLOW
SET-UP
SET-UP
PARENTAL CONTROLS
+
PARENTAL CONTROLS
10
PASSWORD
PASSWORD
SEARCH MODE DISPLAY ZOOM
Please enter a 4-digit password.
- - - -
Enter current password.
- - - -
or
TIME SEARCH STATUS/EXIT
EXIT:
SETUP CANCEL
:
RETURN
EXIT:
SETUP CANCEL
:
RETURN
Example: First-time
setting password
Example: Entering
existing password
Press the Number buttons to enter your four-digit
password. When doing this for the first time, enter any
four digits, then press OK.That number will be used as the
password from that point forward.
3
4
2-5
Helpful Hints
• Write down your password in case
you forget it.
Press the Number 2 button to select CHANGE.
SET-UP
PARENTAL CONTROLS
1.PARENTAL LEVEL
2.CHANGE
ALL
• The default (factory preset) pass-
word is 4737. If you forget your
password, press Number buttons
4, 7, 3, 7 at step 3.The Player
immediately will ask you to enter
a new four-digit password. Use the
Number buttons to enter a new
four-digit code, then press OK.
PARENTAL LEVEL automatically
will be reset to ALL. See page 57
to reset PARENTAL LEVEL as you
desire.
SELECT:
EXIT
/
SET
:
OK
RETURN
:
SETUP CANCEL
:
Press the Number buttons to enter your new four-
digit password (which will appear on theTV
screen), then press OK.
5
6
SET-UP
PARENTAL CONTROLS
PASSWORD
Please enter a 4-digit password.
- - - -
EXIT:
SETUP CANCEL
:
RETURN
• Asterisks (*) will appear instead of
your password to protect the pri-
vacy of the password.
Press SETUP to remove the menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 57
Parental Controls Levels 57
SETUP
AUDIO
SUBTITLE
ANGLE
Follow these steps to set the rating level for your DVDs. DVDs
whose ratings exceed the level you set will not play.
G Before you begin, place the DVD/VCR in DVD mode. Press
OUTPUT SELECT so the red DVD light appears on the front of
the DVD/VCR.
REC/OTR
REPEAT
REPEAT
1,6
1
A-B
CHANNEL/SKIP
CLEAR
TITLE
MODE
RETURN
OUTPUT SELECT
DVD
DISC
VCR
OK
While playback is stopped, press DVD, then press
SETUP.
MENU
1
SET-UP
1.LANGUAGE
2.DISPLAY
3.AUDIO
STOP
PLAY
4.PARENTAL
REW
FF
SELECT:
EXIT
/
SET
:
OK
RETURN
PAUSE
:
SETUP CANCEL
:
TIMER SET
VCR/TV
1
4
7
2
3
6
9
Press the Number 4 button to select PARENTAL.
The SET-UP PARENTAL CONTROLS PASSWORD screen
will appear.
5
8
0
2-5
2
3
4
MEMORY
SPEED
SET-UP
+
10
PARENTAL CONTROLS
PASSWORD
Enter current password.
- - - -
RATING
required for
EXPLANATIONS
• ALL - Parental
Controls is inac-
tive;All discs can
play.
viewers under 18.
• 4 - PG-13 -
Unsuitable for
children under 13
• 3 - PG - Parental
Guidance sug-
gested.
• 1- G - General
Audience; recom-
mended for all
ages.
EXIT:
SETUP CANCEL
:
RETURN
• 8 - Adult material
• 7 - NC-17 Not
appropriate for
children under 17
• 6 - R - Restricted;
parental approval
Press the Number buttons to enter your four-digit
password. If your entry is incorrect, press OK, then enter
the correct password as prompted by the on-screen message.
SET-UP
PARENTAL CONTROLS
1.PARENTAL LEVEL
2.CHANGE
ALL
Helpful Hints
SELECT:
EXIT
/
SET
:
OK
RETURN
• When you play a DVD whose rating
exceeds the level you set, an on-
screen message will indicate the
DVD cannot play. Remove the DVD,
then select a level that allows play-
back or select ALL to turn off
Parental Controls. Reload the DVD
and begin playback. Some DVDs
may let you enter your four-digit
password to begin playback. Refer
to the DVD messages.
:
SETUP CANCEL
:
Press the Number 1 button to select PARENTAL
LEVEL.
SET-UP
PARENTAL CONTROLS
PARENTAL LEVEL
ALL
8
7
6
5
[NC-17]
[R]
SELECT:
EXIT
/
SET
:
OK
RETURN
:
SETUP CANCEL
:
• Some DVDs are not compatible
with Parental Controls. Make sure
the DVD plays according to the
Parental Controls settings you have
made before you allow children
access to the DVD/VCR.
• You cannot change Parental Level
settings until you enter the correct
password.
Press a Number button to select the level you
desire. For example, if you want to play Discs rated PG-
13, press the Number 4 button (press o or p to see all
the rating levels).The level you select will appear on the
screen beside PARENTAL LEVEL in the SET-UP PARENTAL
CONTROLS screen.
5
6
• You cannot use the default password
(4737) to play a DVD.
Press SETUP to remove the menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 58
58 Audio Language
DVD
You can select a language for DVDs during playback.You can
change the language only if multiple languages are available on the
DVD.
G Before you begin, press OUTPUT SELECT so the red DVD light
appears on the front of the DVD/VCR.
POWER
MARKER
SETUP
AUDIO
SUBTITLE
ANGLE
1
REC/OTR
REPEAT
REPEAT
A-B
CHANNEL/SKIP
CLEAR
During DVD playback, press DVD, then press
TITLE
MODE
RETURN
AUDIO so the audio display appears on theTV
OUTPUT SELECT
1
screen.Within five seconds, press AUDIO repeated-
DVD
DISC
VCR
OK
ly to choose one of the available languages. The num-
ber of available languages appears at the right of the audio
display. In this example, eight languages are available
( /8).
MENU
STOP
PLAY
AUDIO 1. ENG DolbyD 5.1CH 48k/3
REW
FF
PAUSE
TIMER SET
VCR/TV
1
4
7
2
3
6
9
5
8
0
MEMORY
SPEED
SLOW
+
10
SEARCH MODE DISPLAY ZOOM
TIME SEARCH STATUS/EXIT
Helpful Hints
• If a desired language is not avail-
able after pressing AUDIO several
times, the DVD does not have that
language.
• Some DVDs only allow you to
change the language in the Disc
menu. Details are on page 48.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 59
Slow Motion, Zoom 59
DVD
POWER
MARKER
Slow Motion
SETUP
AUDIO
SUBTITLE
ANGLE
REC/OTR
REPEAT
REPEAT
During playback, press DVD, then press PAUSE k.
A-B
CHANNEL/SKIP
CLEAR
1
2
TITLE
MODE
RETURN
Press FF g (B). Slow motion playback will begin. Press
FF g (B) repeatedly to vary the speed of slow motion
playback.You may play the DVD at 1/16, 1/8, or 1/2 the nor-
mal playback speed; IBx1/16, IBx1/8, or IBx1/2 will
appear on the TV screen.
OUTPUT SELECT
DVD
DISC
VCR
OK
1
MENU
STOP
PLAY
x1/16
3
2
REW
FF
PAUSE
Press PLAY B (o) to return to normal playback.
3
DVD
Zoom
DVD
DISC
VCR
OK
1
MENU
You can enlarge the DVD picture to twice or four times the regu-
lar size.
STOP
PLAY
2
Press DVD, then press ZOOM during playback.
REW
FF
ZOOM [x2] will appear on the screen and the picture will
PAUSE
1
be twice as large as normal. Press ZOOM again to increase
the picture to four times the regular size. ZOOM [x4] will
appear on the screen.
TIMER SET
VCR/TV
1
4
7
2
3
6
9
5
8
0
ZOOM [x2]
ZOOM [x4]
MEMORY
SPEED
SLOW
+
10
SEARCH MODE DISPLAY ZOOM
TIME SEARCH STATUS/EXIT
1,3
Press o p s B to move the zoomed image up,
down, left, or right.
2
3
Helpful Hints
Position guide example:
The Zoomed area is in the top
portion of the overall picture.
• The sound will be mute during
slow motion playback.
• You cannot play a DVD in reverse
slow motion.
• The gray box with an inner blue
box that shows during Zoomed
playback is the position guide.To
remove it or show it, press OK.The
position of the blue box inside the
gray box indicates the position of
the zoomed image within the over-
all picture.
To return the picture to its normal size, press
ZOOM again so ZOOM [OFF] appears on theTV
screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 60
60 Programmed Playback
AUDIO CD
You may determine the order in which Tracks will play.The order
that you set is called the Program.To set up programmed playback,
follow these steps.
POWER
MARKER
SETUP
AUDIO
SUBTITLE
ANGLE
G Before you begin, place the DVD/VCR in DVD mode.
Press OUTPUT SELECT so the red DVD light appears on the
front of the DVD/VCR.
REC/OTR
REPEAT
REPEAT
A-B
CHANNEL/SKIP
CLEAR
TITLE
MODE
RETURN
While playback is stopped, press DVD, then press
MODE. The PROGRAM screen will appear.
OUTPUT SELECT
DVD
DISC
VCR
OK
1
1
4
MENU
PROGRAM
--
TIME 0:00:00 1/1
STOP
PLAY
START: PLAY
DELETE
:
CLEAR
RANDOM
:
MODE
EXIT
:
RETURN
REW
FF
PAUSE
Press the Number buttons to enter the number of
the firstTrack that you want to play.
G If you enter a wrong Track number, press CLEAR.The last
Track in the Program will be removed.
G Enter single-digit Tracks with a single Number button. For
example, for Track three, press the Number 3 button.
G For Tracks 10 and above, press the +10 button, then the
Number button for the first digit, then the Number but-
ton for the second digit. For example, to play Track 26,
press the +10 button, then press the Number 2 button,
then press the Number 6 button.
TIMER SET
VCR/TV
1
4
7
2
3
6
9
2
5
8
0
MEMORY
SPEED
SLOW
2-3
+
10
SEARCH MODE DISPLAY ZOOM
TIME SEARCH STATUS/EXIT
PROGRAM
TIME 2:07:43 1/1
02 05 07 04 10 14 06 15 21 08
20 28 10 25 35 12 30 42 11 34
49 16 40 58 18 45 63 01 03
_
_
START: PLAY
RANDOM MODE
DELETE
:
CLEAR
RETURN
:
EXIT
:
Helpful Hints
Repeat step 2 until you have entered all theTracks
you wish to play in the Program. The total playing time
of the Program appears beside TIME at the top of the PRO-
GRAM screen.
• You can not combine specific track
or random playback with pro-
grammed playback.
• You may play a Program repeatedly.
During programmed playback, press
REPEAT so REPEAT [TRACK] or
REPEAT [ALL] appears.The current
Track or the entire Program will play
repeatedly.
3
4
Press PLAY B (o). The Tracks will play in the order in
which you programmed them.The Program will play once.
• To see whichTracks you stored in
the Program, press MODE during
playback.
• Track numbers that are not avail-
able on the Audio CD will be reject-
ed and erased. Enter a validTrack
number.
• Turning off the DVD/VCR or open-
ing the disc tray will erase the
Program.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 61
Random Playback, Stereo Sound Mode 61
AUDIO CD
Random Playback
POWER
MARKER
You may play the Tracks of an Audio CD in Random order instead
of the order in which they are recorded (1,2,3...).To set up
Random Playback, follow these steps.
SETUP
AUDIO
SUBTITLE
ANGLE
REC/OTR
REPEAT
REPEAT
A-B
G Before you begin, place the DVD/VCR in DVD mode. Press
OUTPUT SELECT so the red DVD light appears on the front of
the DVD/VCR.
CHANNEL/SKIP
CLEAR
TITLE
MODE
RETURN
OUTPUT SELECT
While playback is stopped, press DVD, then press
MODE twice so the RANDOM screen appears.
DVD
DISC
VCR
OK
1
MENU
1
2
RANDOM
STOP
PLAY
REW
FF
PAUSE
START
:
PLAY
EXIT:
MODE
TIMER SET
VCR/TV
1
4
7
2
3
6
9
5
8
0
While the RANDOM screen appears, press
PLAY B (o). The Tracks will play in random order.After
all the Tracks have played once, playback will stop.
MEMORY
SPEED
SLOW
2
+
10
SEARCH MODE DISPLAY ZOOM
TIME SEARCH STATUS/EXIT
AUDIO CD
Stereo Sound Mode
POWER
MARKER
Press AUDIO repeatedly during playback to choose
SETUP
AUDIO
SUBTITLE
ANGLE
1
AUDIO STEREO,AUDIO L-CH, or AUDIO R-CH.
REC/OTR
REPEAT
REPEAT
1
A-B
AUDIO STEREO
CHANNEL/SKIP
CLEAR
Both right and left channels
are active (stereo).
TITLE
MODE
RETURN
OUTPUT SELECT
AUDIO L-CH
DVD
DISC
VCR
OK
Only the left channel is active.
MENU
AUDIO R-CH
Only the right channel is active.
STOP
PLAY
REW
FF
PAUSE
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 62
62 MP3 Playback
MP3
The DVD/VCR will play MP3 files recorded on a CD-RW
(Compact Disc-Rewritable).
G Before you begin, place the DVD/VCR in DVD mode. Press
OUTPUT SELECT so the red DVD light appears on the front of
the DVD/VCR.
POWER
MARKER
SETUP
AUDIO
SUBTITLE
ANGLE
REC/OTR
REPEAT
REPEAT
A-B
CHANNEL/SKIP
CLEAR
When you put a CD-RW with MP3 files in the DVD/VCR,
TITLE
MODE
RETURN
the MP3 menu will appear on the TV screen. While play-
OUTPUT SELECT
1
back is stopped, press DVD, then press o or p to
select the Album orTrack you want to play.
DVD
DISC
VCR
OK
1
1-2
3
MENU
2
If you choose aTrack, press PLAY B (o)or OK.
The tracks will play in the order in which they were
2
STOP
PLAY
recorded, i.e. 1, 2, 3, starting with the Track you selected.
If you select an Album and press OK, theTrack
selection screen will appear. Press K or L to select
theTrack you want to play, then press PLAY B (o)
or OK .
REW
FF
PAUSE
TIMER SET
VCR/TV
1
4
7
2
3
6
9
G Choose FIRST PLAY to start play from the first Track
listed.
G Press TITLE to return to the first item on the first MP3
screen.
5
8
0
MEMORY
SPEED
SLOW
+
10
SEARCH MODE DISPLAY ZOOM
To stop playback, press STOP C (L).
TIME SEARCH STATUS/EXIT
3
Helpful Hints
• Folders are known as Albums; files
are known asTracks.
• A “+” will appear at the start of the
Album name.
• If all theTracks cannot appear on
the screen at the same time, p
indicates moreTracks on the next
screen; K indicates previous screens.
The current screen number and the
total number of screens will appear
on the screen.
• A total of 255 Albums andTracks
can be recognized.
• Discs recorded in multi-session
recordings will not play on the DVD
Player of this DVD/VCR.
• OnlyTracks having file names end-
ing in .mp3 will play.
• You can play MP3 files recorded at
a minimum of 112 kbps.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 63
MP3 Display Information, MP3Track Selection 63
MP3
DVD
DISC
VCR
MP3 Display Information
You can review MP3 file information during playback.
G Before you begin, place the DVD/VCR in DVD mode. Press
OUTPUT SELECT so the red DVD light appears on the front of
the DVD/VCR.
1
MENU
OK
STOP
PLAY
Press DVD, then press DISPLAY/STATUS/EXIT during
REW
FF
PAUSE
playback. The currently playing Track will be highlighted in
1
yellow.
TIMER SET
VCR/TV
1
4
7
2
3
6
9
Press DISPLAY/STATUS/EXIT again. The elapsed play-
5
8
0
ing time of the current Track will appear at the top of the
MEMORY
SPEED
SLOW
2
display.
T indicates Track repeat
+
10
SEARCH MODE DISPLAY ZOOM
A indicates Album (folder) repeat
Dindicates Disc repeat
TIME SEARCH STATUS/EXIT
1-3
Press DISPLAY/STATUS/EXIT again to remove the
3
DISC
MENU
OK
MP3
2
STOP
PLAY
FF
MP3Track Selection
G Before you begin, place the DVD/VCR in DVD mode. Press
REW
OUTPUT SELECT so the red DVD light appears on the front of
the DVD/VCR.
PAUSE
TIMER SET
VCR/TV
1
4
7
2
3
6
9
Press DVD, then press SEARCH MODE/TIME
SEARCH. The SEARCH menu will appear.The current
Track or the Track at which play will Resume (Resume On)
will be highlighted. If Resume is off and playback is stopped,
“FIRST PLAY” will be highlighted.
5
8
0
1
MEMORY
SPEED
SLOW
+
10
SEARCH MODE DISPLAY ZOOM
ALBUM NAME
TIME SEARCH STATUS/EXIT
1,3
+ALBUM01
TRACK11
TRACK12
TRACK13
TRACK14
Helpful Hints
• During playback, press the
1/15
PLAY
SELECT:
o
p
START:
Number buttons to select another
Track, which will begin playing
immediately. Or, press CHAN-
NEL/SKIP H/G (p/o) to
move to previous or subsequent
Tracks.
• If theTrack you chose is not avail-
able or cannot be accessed,“X”
will appear on theTV screen. Play
may resume at a differentTrack.
• SpecificTime playback is not pos-
sible with MP3 files.
Press o or p to select aTrack you want to play.
Press PLAY B (o) to start playing theTrack.
2
3
Press SEARCH MODE/TIME SEARCH to remove the
SEARCH menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 64
64 Random MP3 Playback, Programmed MP3 Playback
MP3
POWER
Random MP3 Playback
MARKER
G Before you begin, place the DVD/VCR in DVD mode. Press
SETUP
AUDIO
SUBTITLE
ANGLE
OUTPUT SELECT so the red DVD light appears on the front of
the DVD/VCR.
REC/OTR
REPEAT
REPEAT
A-B
CHANNEL/SKIP
CLEAR
While playback is stopped, press DVD, then press
MODE twice. The RANDOM screen will appear.
TITLE
MODE
RETURN
1
OUTPUT SELECT
RANDOM
DVD
DISC
VCR
OK
1
MENU
START
:
PLAY
EXIT:
MODE
STOP
PLAY
2
3
REW
FF
Press PLAY B (o) to play the tracks in random order.
PAUSE
2
POWER
MP3
MARKER
Programmed MP3 Playback
SETUP
AUDIO
SUBTITLE
ANGLE
G Before you begin, place the DVD/VCR in DVD mode. Press
OUTPUT SELECT so the red DVD light appears on the front of
the DVD/VCR.
REC/OTR
REPEAT
REPEAT
A-B
CHANNEL/SKIP
CLEAR
TITLE
MODE
RETURN
While playback is stopped, press DVD, then press
OUTPUT SELECT
MODE. The PROGRAM FOLDER NAME screen will
DVD
DISC
VCR
OK
1
1
2
4
appear.
MENU
PROGRAM FOLDER NAME
+ALBUM01
+ALBUM02
+ALBUM03
TRACK01
TRACK02
1/2
STOP
PLAY
START
RAMDOM: MODE
:
PLAY
DELETE:
EXIT
CLEAR
RETURN
REW
FF
:
PAUSE
Press o or p to select aTrack, then press OK to
save it in the Program. The programmed Track will
appear on the right side of the screen. Press o or p to
see additional Tracks.
2
Repeat step 2 to enter all the Tracks you want.
PROGRAM - ALBUM01
+ALBUM11
+ALBUM12
TRACK11
TRACK01
TRACK11
TRACK12
1/1
1/2
START
RAMDOM: MODE
:
PLAY
DELETE:
EXIT
CLEAR
RETURN
:
Helpful Hints
• Press CLEAR to delete the last
item in the Program.
• Turning off the DVD/VCR or open-
ing the Disc tray will erase the
Program.
Press PLAY B (o) to play the Program.
3
4
Press STOP C (p) to stop playing the Program.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 65
On-Screen Displays 65
DVD
You can check information about the current DVD by pressing
DISPLAY/STATUS/EXIT on the remote control.
POWER
MARKER
SETUP
AUDIO
SUBTITLE
ANGLE
Press DVD, then press DISPLAY/STATUS/EXIT dur-
ing playback.
REC/OTR
REPEAT
REPEAT
A-B
1
CHANNEL/SKIP
CLEAR
CH 7/49 0:01:46 - 0:03:27
TITLE
MODE
RETURN
Elapsed playing time
of the current Chapter;
remaining playing time
of the current Chapter
CH (Chapter):
Current Chapter number
/ total Chapters
4
3
OUTPUT SELECT
DVD
DISC
VCR
OK
1
1
MENU
Press DISPLAY/STATUS/EXIT again. If you want, you can
press a Number button now to start playing a specific Chapter.
2
3
STOP
PLAY
TT 1/2 0:00:00 - 1:23:45
REW
FF
TT (Title):
Current Title number
/ Total Titles
Elapsed playing time of the
current Title; remaining playing
time of the current Title
PAUSE
TIMER SET
VCR/TV
1
4
7
2
3
6
9
Press DISPLAY/STATUS/EXIT again.
5
8
0
MEMORY
SPEED
SLOW
BIT RATE: The quantity of
information recorded on the DVD.
BIT RATE
C L0
+
10
Layer number, if applicable
(It appears when a dual-layered Disc is playing.)
L0: Layer 0 is playing
L1: Layer 1 is playing
SEARCH MODE DISPLAY ZOOM
TIME SEARCH STATUS/EXIT
Current Repeat setting, if active
C: Chapter repeat
T: Title repeat
A
B: A-B repeat
1-4
Press DISPLAY/STATUS/EXIT or RETURN to
remove the display.
4
AUDIO CD
CHANNEL/SKIP
CLEAR
TITLE
MODE
RETURN
You can check information about the current Audio CD using DIS-
PLAY/STATUS/EXIT.
OUTPUT SELECT
DVD
VCR
OK
Press DVD, then press DISPLAY/STATUS/EXIT dur-
DISC
MENU
ing playback.
1
TR 4/12 0:03:21 - 0:02:15
TR (Track):
Current Track number
/ total Tracks
Elapsed playing time
of the current Track;
remaining playing time
of the current Track
STOP
PLAY
FF
REW
PAUSE
TIMER SET
VCR/TV
Press DISPLAY/STATUS/EXIT again. If you want, you can
1
4
7
2
3
6
9
press a Number button now to start playing a specificTrack.
2
3
5
8
0
ALL 4/12 0:13:45 - 0:45:40
T
MEMORY
SPEED
SLOW
Current Repeat setting, if active
T: Track repeat
A: All repeat
ALL:
Current track number
/ total Tracks
+
10
A
B: A-B repeat
SEARCH MODE DISPLAY ZOOM
Elapsed playing time
of the current Audio CD;
remaining playing time of
the current Audio CD
TIME SEARCH STATUS/EXIT
Press DISPLAY/STATUS/EXIT or RETURN to
remove the display.
1-3
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 66
66 Display Settings
You can change certain aspects of the DVD Player’s display
screens, on-screen messages, and the display panel on the front of
the DVD/VCR.You also can change the Aspect Ratio.To change
such settings, follow these steps.
G Before you begin, place the DVD/VCR in DVD mode. Press
OUTPUT SELECT so the red DVD light appears on the front of
the DVD/VCR.
POWER
MARKER
SETUP
AUDIO
SUBTITLE
ANGLE
When playback is stopped, press DVD, then press
REC/OTR
REPEAT
REPEAT
A-B
1
2
SETUP. The SET-UP screen will appear.
CHANNEL/SKIP
CLEAR
1
TITLE
MODE
RETURN
SET-UP
1.LANGUAGE
2.DISPLAY
3.AUDIO
OUTPUT SELECT
DVD
DISC
VCR
OK
4.PARENTAL
MENU
SELECT:
EXIT
/
SET
:
OK
RETURN
:
SETUP CANCEL
:
STOP
PLAY
Press the Number 2 button to select DISPLAY.
REW
FF
2
PAUSE
SET-UP
DISPLAY CONTROLS
TIMER SET
VCR/TV
1.TV ASPECT
2.PANEL DISPLAY
3.ANGLE ICON
4:3 LETTER BOX
BRIGHT
ON
1
4
7
2
3
6
9
4.AUTO POWER OFF ON
5.BACKGROUND BLUE
5
8
0
MEMORY
SPEED
SLOW
SELECT:
EXIT
/
SET
:
OK
RETURN
:
SETUP CANCEL
:
+
10
SEARCH MODE DISPLAY ZOOM
TIME SEARCH STATUS/EXIT
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 67
Display Settings (cont’d) 67
Press K or L to select an item, then press OK.
3
G If you selected TV ASPECT, press o or p to select a set-
ting, then press OK. Choose 4:3 LETTER BOX if you want
black bars to appear at the top and bottom of the picture.
Choose 4:3 PAN & SCAN for a full height picture, with
both sides trimmed.
3
POWER
MARKER
SETUP
AUDIO
SUBTITLE
ANGLE
Choose 16:9 WIDE if a widescreen TV is connected to the
DVD/VCR.
REC/OTR
REPEAT
REPEAT
A-B
4
G If you selected PANEL DISPLAY, press o or p to select
BRIGHT, DIMMER, or AUTO, then press OK.This adjusts
the brightness of the display panel on the front of the
DVD/VCR.The default setting is BRIGHT. If you choose
AUTO, the display dims only during Disc playback.
G If you selected ANGLE ICON, press OK repeatedly to
turn ANGLE ICON ON or OFF.The default setting is ON.
Choose ON to see the Angle icon when multiple camera
angles are available during DVD playback. Details are on page
55. Choose OFF to disable the Angle icon.
CHANNEL/SKIP
CLEAR
TITLE
MODE
RETURN
OUTPUT SELECT
DVD
DISC
VCR
OK
MENU
STOP
PLAY
REW
FF
G If you selected AUTO POWER OFF, press OK repeatedly
to turn AUTO POWER OFF ON or OFF.The default set-
ting is ON. Choose ON if you want the DVD/VCR to
switch toVCR mode automatically after 35 minutes of no
use in DVD mode.
G If you selected BACKGROUND, press OK repeatedly to
select BLUE or GRAY as the background color for the on-
screen menus.
PAUSE
TIMER SET
VCR/TV
1
4
2
3
6
9
5
8
0
MEMORY
SPEED
SLOW
7
+
10
SEARCH MODE DISPLAY ZOOM
TIME SEARCH STATUS/EXIT
TV ASPECT
SET-UP
PANEL DISPLAY
SET-UP
DISPLAY CONTROLS
TV ASPECT
DISPLAY CONTROLS
PANEL DISPLAY
1. BRIGHT
2. DIMMER
3. AUTO
1.4:3 LETTER BOX
2.4:3 PAN & SCAN
3.16:9 WIDE
SELECT:
EXIT
/
SET
:
OK
RETURN
SELECT:
EXIT
/
SET
:
OK
RETURN
:
SETUP CANCEL
:
:
SETUP CANCEL
:
ANGLE ICON
AUTO POWER OFF
SET-UP
SET-UP
DISPLAY CONTROLS
DISPLAY CONTROLS
1.TV ASPECT
2.PANEL DISPLAY
3.ANGLE ICON
4.AUTO POWER OFF ON
5.BACKGROUND BLUE
4:3 LETTERBOX
BRIGHT
OFF
1.TV ASPECT
2.PANEL DISPLAY
3.ANGLE ICON
4.AUTO POWER OFF ON
5.BACKGROUND BLUE
4:3 LETTERBOX
BRIGHT
ON
SELECT:
EXIT
/
SET
:
OK
RETURN
SELECT:
EXIT
/
SET
:
OK
RETURN
:
SETUP CANCEL
:
:
SETUP CANCEL
:
Helpful Hints
• Selecting a differentTV ASPECT
setting is only effective if it is avail-
able on the DVD.
BACKGROUND
SET-UP
DISPLAY CONTROLS
1.TV ASPECT
2.PANEL DISPLAY
3.ANGLE ICON
4:3 LETTERBOX
BRIGHT
OFF
• DVDs may refer to the Letterbox
format as the widescreen version.
Letterbox stretches the picture
horizontally so the picture resem-
bles movies seen at a theater.
• DVDs may refer to Pan and Scan
as “reformatting the picture to fit
yourTV screen.”
4.AUTO POWER OFF ON
5.BACKGROUND GRAY
SELECT:
EXIT
/
SET
:
OK
RETURN
:
SETUP CANCEL
:
Press SETUP to remove the menus.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 68
68 Language Settings
You can use the LANGUAGE settings to select different languages
for the Audio or Subtitles of DVDs, as well as languages for DVD
Disc menus and the menus of the DVD Player SETUP menus of
the DVD/VCR.
G Before you begin, place the DVD/VCR in DVD mode. Press
OUTPUT SELECT so the red DVD light appears on the front
of the DVD/VCR.
POWER
MARKER
SETUP
AUDIO
SUBTITLE
ANGLE
REC/OTR
REPEAT
REPEAT
A-B
While playback is stopped, press DVD, then press
1
2
CHANNEL/SKIP
CLEAR
SETUP. The SETUP screen appears.
1
TITLE
MODE
RETURN
SET-UP
OUTPUT SELECT
1.LANGUAGE
2.DISPLAY
3.AUDIO
DVD
DISC
VCR
OK
4.PARENTAL
MENU
SELECT:
EXIT
/
SET
:
OK
RETURN
:
SETUP CANCEL
:
3
STOP
PLAY
Press the Number 1 button to select LANGUAGE.
REW
FF
2
3
SET-UP
PAUSE
LANGUAGE CONTROLS
1.AUDIO
ORIGINAL
ENGLISH
ORIGINAL
ENGLISH
TIMER SET
VCR/TV
2.SUBTITLE
3.DISC MENU
4.PLAYER MENU
1
4
7
2
3
6
9
5
8
0
SELECT:
EXIT
/
SET
:
OK
RETURN
MEMORY
SPEED
:
SETUP CANCEL
:
+
10
o
p
Press
or
to select AUDIO, SUBTITLE, DISC
MENU, or PLAYER MENU.Then, press OK. The
menu for the selected item will appear.
Helpful Hints
SET-UP
AUDIO:The DVD’s audio plays in
LANGUAGE CONTROLS
• Some DVDs only allow you to
AUDIO
the selected language, if available on
change audio, subtitle, or menu lan-
guages in the DVD Disc menu.
Details are on page 48.
1.ORIGINAL
2. ENGLISH
3. FRENCH
4. SPANISH
the DVD.
5. GERMAN
p
SELECT:
/
SET
:
OK
EXIT:
SETUP CANCEL
:
RETURN
• Language options for AUDIO,
SUBTITLE, and DISC MENU are
not available with some DVDs. Use
the AUDIO and SUBTITLE buttons
instead to select different languages.
Details are on pages 55 (subtitles)
and 58 (audio).
SET-UP
LANGUAGE CONTROLS
SUBTITLE
SUBTITLE: DVD subtitles appear in
the chosen language, if available on
the DVD.
1. OFF
2. ENGLISH
3. FRENCH
4. SPANISH
5. GERMAN
p
SELECT:
/
SET
:
OK
EXIT:
SETUP CANCEL
:
RETURN
• The Player menu can be in English,
French, or Spanish. If you accidental-
ly get French or Spanish and need
English, follow these steps.
1) Press DVD, then press SETUP.
2) Press the Number 1 button to
select LANGUE or IDIOMA.
3) Press the Number 4 button to
select MENU LECTEUR or MENU
REPRODUC.
SET-UP
LANGUAGE CONTROLS
DISC MENU
DISC MENU:A DVD’s Disc menu
appears in the chosen language, if
available on the DVD.
1. ORIGINAL
2. ENGLISH
3. FRENCH
4. SPANISH
5. GERMAN
p
SELECT:
EXIT
/
SET
:
OK
:
SETUP CANCEL
:
RETURN
SET-UP
LANGUAGE CONTROLS
PLAYER MENU
PLAYER MENU:The DVD Player’s
SETUP menu appears in the select-
ed language.
4) Press the Number 1 button to
select ENGLISH.The menus will
appear in English.
1. ENGLISH
2. FRANÇAIS
3. ESPAÑOL
5) Press SETUP to remove the
menus.
SELECT:
EXIT
/
SET
:
OK
RETURN
:
SETUP CANCEL
:
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 69
Language Settings (cont’d) 69
POWER
MARKER
o
p
Press
or
to select a setting, then press OK.
GIf you select OTHER at the AUDIO, SUBTITLE, or DISC
MENU screen, press four Number buttons to enter the
code for the language you desire. Refer to the list below
for the correct language code.You can only select other
languages for AUDIO, SUBTITLE, and DISC MENU if the
language is available on the Disc.
SETUP
AUDIO
SUBTITLE
ANGLE
4
5
REC/OTR
REPEAT
REPEAT
5
4
A-B
CHANNEL/SKIP
CLEAR
TITLE
MODE
RETURN
OUTPUT SELECT
GEach screen can show a maximum of five languages.To
DVD
DISC
VCR
OK
o
p
.
see additional languages, press
or
MENU
SET-UP
LANGUAGE CONTROLS
DISC MENU
LANGUAGE CODE
STOP
PLAY
Please enter a 4-digit language code.
- - - -
REW
FF
PAUSE
EXIT:
SETUP CANCEL
:
RETURN
TIMER SET
VCR/TV
1
4
7
2
3
6
9
Press SETUP to remove the menu.
5
8
0
MEMORY
SPEED
+
10
Language Code Language Code Language Code Language Code Language Code
A-B English[ENG] 5160 Javanese 5669 Oriya 6164 Somali 6561
Abkhazian
4748 Esperanto
5161 Kannada
5166 Kashmiri
F-H Kazakh
5760 Oromo (Afan)6159 Spanish[SPA] 5165
Afar
4747 Estonian
5765 Panjabi
5757 Pashto
6247 Sundanese
6265 Swahili
6567
6569
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
4752
6563 Faroese
5261 Kinyarwanda 6469 Persian
5256 Kirghiz 5771 Polish
6460 Portugese[POR]
5471 French[FRE] 5264 Korean[KOR] 5761 6266 Tajik
5247 Swedish[SWE] 6568
6258
4759 Fiji
T
4764 Finnish[FIN] 5255 Kirundi
Tagalog
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
4765 Frisian
4771 Gaelic (Scots) 5350
5358 Laothian
5747 Latin
5271 Kurdish
5767 Pushto
Quechua
6265 Tamil
6367 Tatar
Telugu
6459 Thai
Tibetan
6461 Tigrinya
L-N
Azerbaijani 4772 Galician
Bangla
5861 Rhaeto-Romance
4860 Georgian
5847
Bashkir
Basque
Bengali
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
4847 German[GER] 5051 Latvian
5167 Greek[GRE] 5158 Lettish
4860 Greenlandic 5758 Lingala
5868 Romanian[RUM]
5868
5860 Russian[RUS] 6467 Tonga
5866 Tsonga
5367 Macedonian 5957
5072 Guarani
4854 Gujarati
4855 Hausa
4864 Hebrew
4853 Hindi
5360 Lithuanian
S
Turkish[TUR] 6664
6559 Turkmen
5447 Malagasy
5569 Malay
5455 Malayalam
Maltese
5467 Maori
Marathi
5953 Samoan
6657
6669
5965 Sangho
5958 Sanskrit
5966 Serbian
6553 Twi
6547
U-Z
5971 Hungarian[HUN]
6564 Ukrainian
Urdu
6554 Uzbek
6757
6764
6772
Byelorussian 4851
5955 Serbo-Croatian
5964
C-E
I-K
Cambodian 5759 Icelandic[ICE] 5565 Moldavian
5961 Sesotho
5960 Setswana
6047 Shona
6051 Sindhi
6566 Vietnamese 6855
Catalan
4947 Indonesian
5560 Mongolian
5547 Nauru
5551 Nepali
6660 Volapuk
6560 Welsh
6550 Wolof
6555 Xhosa
6565 Yiddish
6557 Yoruba
6558 Zulu
6861
4971
6961
7054
5655
7161
7267
Chinese[CHI] 7254 Interlingua
Corsican
Croatian
Czech
4961 Interlingue
5464 Inupiak
4965 Irish[IRI]
5557 Norwegian[NOR]
Singhalese
5347
5566
6061 Siswat
Danish[DAN] 5047 Italian[ITA]
Dutch[DUT] 6058 Japanese[JPN] 5647 Occitan
O-R
Slovak
6149 Slovenian
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 70
70 Audio Settings
Choose the appropriate Audio Settings for your equipment.These
settings only affect the playback of the DVD Player of the
DVD/VCR.
G Before you begin, place the DVD/VCR in DVD mode. Press
OUTPUT SELECT so the red DVD light appears on the front of
the DVD/VCR.
4
5
POWER
MARKER
While playback is stopped, press DVD, then press
SETUP. The SETUP screen will appear.
SETUP
AUDIO
SUBTITLE
ANGLE
1
REC/OTR
REPEAT
REPEAT
A-B
1
SET-UP
CHANNEL/SKIP
CLEAR
1.LANGUAGE
2.DISPLAY
3.AUDIO
TITLE
MODE
RETURN
4.PARENTAL
OUTPUT SELECT
SELECT:
EXIT
/
SET
:
OK
RETURN
DVD
DISC
VCR
OK
:
SETUP CANCEL
:
MENU
Press the Number 3 button to select AUDIO.
3
2
STOP
PLAY
2
3
4
REW
FF
o
p
Press
or
to select an item, then follow step 4
PAUSE
accordingly.
TIMER SET
VCR/TV
1
4
7
2
3
6
9
G If you selected DRC, press OK repeatedly to turn
Dynamic Range Control (DRC) ON or OFF.This levels the
sound volume by suppressing loud sound and raising the
volume of low sound.
5
8
0
MEMORY
SPEED
SLOW
G If you selected DOLBY DIGITAL, press OK
repeatedly to turn DOLBY DIGITAL ON or OFF. Select
ON if you connected the DVD/VCR to a stereo that is
Dolby Digital compatible. Details are on page 13.
G If you selected MPEG, press OK repeatedly to turn
MPEG ON or OFF. Select ON when the DVD/VCR is con-
nected to an MPEG-compatible Stereo.
+
10
SEARCH MODE DISPLAY ZOOM
TIME SEARCH STATUS/EXIT
G If you selected DOWN SAMPLING, press OK.
Then, press o or p to select AUTO, 48 kHz, or 96
kHz, then press OK. The AUDIO CONTROLS menu will
reappear.
Select 96 kHz if the DVD was recorded in PCM (Pulse
Code Modulation) 96 kHz. Otherwise, select 48 kHz.
DRC
SET-UP
AUDIO CONTROLS
DOLBY DIGITAL
SET-UP
AUDIO CONTROLS
1.DRC
2.DOLBY DIGITAL
3.MPEG
ON
ON
OFF
AUTO
1.DRC
2.DOLBY DIGITAL
3.MPEG
4.DOWN SAMPLING
OFF
ON
OFF
AUTO
4.DOWN SAMPLING
SELECT:
EXIT
/
SET
:
OK
RETURN
SELECT:
EXIT
/
SET
:
OK
RETURN
:
SETUP CANCEL
:
:
SETUP CANCEL
:
MPEG
DOWN SAMPLING
Helpful Hints
SET-UP
SET-UP
AUDIO CONTROLS
DOWN SAMPLING
AUDIO CONTROLS
• Setting DOWN SAMPLING to
96kHz activates copyright protec-
tion and mutes the sound.
Selecting AUTO sets downsampling
to 48kHz.
1.DRC
OFF
ON
ON
2.DOLBY DIGITAL
3.MPEG
1.AUTO
2.48kHz
3.96kHz
4.DOWN SAMPLING
AUTO
SELECT:
EXIT
/
SET
:
OK
RETURN
SELECT:
EXIT
/
SET
:
OK
RETURN
:
SETUP CANCEL
:
:
SETUP CANCEL
:
Press SETUP to remove the menu.
• MPEG represents the Motion
Picture Experts Group.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 71
Black Level Settings,TruSurround Setting 71
DVD
Black Level Settings
POWER
MARKER
Adjust the Black Level Settings to make the black parts of the
DVD picture as bright as you prefer.
SETUP
AUDIO
SUBTITLE
ANGLE
G Before you begin, place the DVD/VCR in DVD mode. Press
OUTPUT SELECT so the red DVD light appears on the front of
the DVD/VCR.
REC/OTR
REPEAT
REPEAT
A-B
CHANNEL/SKIP
CLEAR
TITLE
MODE
RETURN
Press DVD, then press MODE once during DVD
OUTPUT SELECT
playback so BLACK LEVEL shows in the top left
DVD
DISC
VCR
OK
1
2
1
1
corner of theTV screen.
MENU
2
2
Within 10 seconds, press OK repeatedly to choose
ON or OFF. ON brightens the dark parts of the picture.
STOP
PLAY
OFF shows the original picture as recorded.
REW
FF
BLACK LEVEL : ON
PAUSE
TruSurround Setting
POWER
MARKER
You can enjoy improved stereo sound when you play DVDs or
Audio CDs recorded in Dolby Digital, PCM 48 kHz, or MPEG
Audio. Check the Disc case for details on availability.
SETUP
AUDIO
SUBTITLE
ANGLE
REC/OTR
REPEAT
REPEAT
A-B
CHANNEL/SKIP
CLEAR
Press DVD, then press MODE twice during Disc
playback so SRSTruSurround shows in the top left
TITLE
MODE
RETURN
1
2
corner of theTV screen.
OUTPUT SELECT
DVD
DISC
VCR
OK
Within 10 seconds, press OK repeatedly to choose
MENU
ON or OFF. The default setting is OFF. Choose ON only
if you connected the DVD/VCR to a stereo that has a
Dolby Digital or MPEG decoder. Make sure the current
DVD is recorded in Dolby Digital, PCM 48 kHz, or MPEG
Audio.
STOP
PLAY
REW
FF
PAUSE
SRSTruSurround ON
Helpful Hints
• SRSTruSurround is available only
when the DVD/VCR is connected
to aTV or Stereo using the red
and white DVD/VCR AUDIO OUT
jacks on the DVD/VCR.
• If you connected the DVD/VCR to
a stereo using the COAXIAL DIGI-
TAL AUDIO OUT jack as described
on page 13, turn off SRS
TruSurround; otherwise, there will
be no sound.
This unit employsTruSurround system
of SRS Labs, Inc. as virtual technology.
TruSurround and the
symbol are trademarks of SRS Labs, Inc.
TruSurround technology is incorporated under license from SRS Labs, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 72
72 Care and Maintenance, Specifications
Care and Maintenance
Cleaning the DVD/VCR
• Wipe the front panel and other exterior surfaces of the DVD/VCR with a soft,
slightly damp cloth.
• Never use a solvent, thinner, benzene, or alcohol to clean the DVD/VCR. Do not
spray insecticide liquid near the DVD/VCR. Such chemicals may discolor the surface
or damage the DVD/VCR.
Cleaning a Disc
• Use a soft, dry cloth to wipe the Disc.
• Wipe the Disc in a straight line from the center to the edge. Never wipe the Disc in
a circular motion.
• Do not use detergent or abrasive cleaning agents.
• Handle the Discs so fingerprints and dust do not adhere to the Discs.
• Always store the Disc in its protective case when it is not in use.
Checking the Laser
• If the DVD/VCR does not operate as described in this manual, the DVD Player’s
laser may be dirty. Consult an Authorized Service Center for inspection and cleaning
of the laser.
Caring forVideo Cassettes
• Use only cassettes with the
mark.
• Remove any light adhesive stick-on notes from the video cassette before putting the
cassette in theVCR. Removable labels can jam theVCR.
Caring for theVCR’sVideo Heads
• Periodic maintenance is required to maintain your DVD/VCR’s excellent perfor-
mance.TheVCR has an Automatic Head Cleaner. However, the video heads will
require replacement eventually. Only an authorized service center should perform
this service.
Specifications
Total Distortion Factor
Audio CD: 0.007% (JEITA)
Video Heads
Four heads - Hi-Fi
Wow and Flutter
Below the measurement limitation
( 0.001% W PEAK) (JEITA)
Antenna
VHF/UHF – 75 ohm
external antenna terminal
Power Requirement
VHF Output Signal
Channel 03 or 04 (switchable)
75 ohms unbalanced
120V AC +/- 10%, 60 Hz +/- 0.5%
Power Consumption
Power on: 25 W
Power off: 7.2 W
Color System
NTSC
OperatingTemperature
Frequency Response
41°F (5°C) to 104°F (40°C)
DVD (linear sound):
20 Hz to 22 kHz (sample rate: 48 kHz)
20 Hz to 44 kHz (sample rate: 96 kHz)
Audio CD: 20 Hz to 20 kHz
Relative Humidity
30% to 80%
Dimensions
17-1/8” (W) x 3-7/8” (H) x 10-1/2” (D)
(435mm x 99mm x 266mm)
Signal-to-Noise Ratio
Audio CD: 110 dB JEITA
(Japan Electronics and Information
Technology Industries Association)
Weight
8.8 lbs. (4.0 kg.)
Dynamic Range
DVD (linear sound): 95 dB
Audio CD: 94 dB (JEITA)
NOTE: Designs and specifications are sub-
ject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 73
Glossary 73
AUDIO IN/OUT Jacks: jacks on the front and back of the DVD/VCR that receive
audio from another source (IN) or send audio to another system (OUT).
Automatic Channel Setup: process in which theVCR memorizes all available TV
channels.Then, when you press CHANNEL/SKIP j/i (p/o) inVCR mode, you
only scan through channels you receive.
Bands: settings that allow you to tune channels.
• Antenna –VHF (very high frequency; channels 2-13) and UHF (ultra high frequen-
cy; channels 14-69).
• Cable – standard channels 1-125 can be received without a Cable Box.
Cable Box/DBS Output Channel: 03 or 04.
COAXIAL DIGITAL AUDIO OUT jack: Sends digital audio to a stereo receiv-
er, allowing you to adjust the volume at the stereo receiver.This connection provides
the 5.1 channel surround sound as heard in movie theaters.
COMPONENTVIDEO OUT (Y, Cr, Cb) Jacks: jacks on the back of the
DVD/VCR that send high-quality video to a TV with ComponentVideo In jacks.This
connection provides the best picture quality. If you use this video connection, you will
not need the supplied yellow video cable.
Dolby Digital: A surround sound system that provides 5.1 channel sound as used in
movie theaters.
DTS: Digital Theater Systems.This is a surround sound system, but it is different
from Dolby Digital.The formats were developed by different companies.
Dubbing: copying a video cassette using anotherVCR.
HQ: high quality; a feature in theVCR circuitry which provides enhanced picture
detail.
Line Input: The channel to which you set your DVD/VCR during video cassette
copying. If you use the AUDIO andVIDEO In jacks on the front of the DVD/VCR,
select channel 002 (AV FRONT). If you use the AUDIO andVIDEO IN jacks on the
back of the DVD/VCR, select 001 (AV REAR). If you accidentally enter Line Input
mode, press CHANNEL/SKIP j/i (p/o) or the Number buttons to select
another channel.
OTR: One-Touch Recording; a timed recording on theVCR that starts immediately
and records for 30 minutes to eight hours.
RF coaxial cable: A black cable supplied with your DVD/VCR. Use it to connect
your DVD/VCR to your TV (or Cable Box or DBS).
S-Video: Produces a clearer picture by sending separate signals for the luminance
and the color. If you connect an optional S-Video cable, you will not need to use the
supplied yellow video cable.
Tape Speeds: how fast the video cassette travels during a recording or playback.
The faster the tape speed, the better the picture quality. Slower tape speeds affect
picture quality, but you can record more onto a cassette.
• SP (standard play) – fastest tape speed (recording time for a T120 tape is approxi-
mately two hours); best picture quality.
• LP (long play) – average tape speed; playback only.
• SLP (super long play) – slowest tape speed (recording time for a T120 tape is
approximately six hours).
VIDEO IN/OUT Jacks: jacks on the front and back of the DVD/VCR that receive
video from another source (IN) or send video to another system (OUT).
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 74
74 Helpful Hints
If you are having problems with your product, check this list of problems and possible solutions before
requesting service.You may be able to solve the problem yourself.
If you need to call a customer service representative, please know the model number and serial number of
your product before you call.This information is displayed on the back of the product. Also, please take a
moment to identify the problem you are having, and be prepared to explain this to the representative. If
you believe the representative will need to help you with operations, please stay near the product. Our
representatives will be happy to assist you.
The DVD/VCR has no power.
• Make sure the power cord is connected completely to an AC (alternating current) outlet.
y
• Press the POWER
button to turn on the DVD/VCR.“P-ON” will appear briefly on the display panel as
the power is turning on.The DVD/VCR always turns on inVCR mode.To switch to DVD mode, press
OUTPUT SELECT so the red DVD light appears on the front of the DVD/VCR.
The remote control will not operate the DVD/VCR.
• Aim the remote control directly at the DVD/VCR’s remote sensor. Details are on page 20.
• Remove all obstacles between the remote control and the DVD/VCR.
• Inspect and/or replace the batteries in the remote control. Details are on page 14.
• Use the remote control within 23 feet of the DVD/VCR.
• When trying to play Discs, press the DVD button, then try the other DVD feature buttons. Press OUT-
PUT SELECT so the red DVD light appears on the front of the DVD/VCR.This means the DVD/VCR is in
DVD mode.
• To use theVCR features, pressVCR, then try the otherVCR feature buttons. Press OUTPUT SELECT so
the greenVIDEO light appears on the front of the DVD/VCR.This means the DVD/VCR is inVCR mode.
• Make sure the greenVCR/TV light appears on the front of the DVD/VCR. If it does not, pressVCR, then
pressVCR/TV once.
There is no picture in DVD mode.
• Make sure the video cable is connected correctly.You may connect either the yellow video cable (sup-
plied), an optional S-Video cable, or optional component video cables.You only need one video connec-
tion between the DVD/VCR and the TV. Make sure the TV is set to the correctVideo In channel (usually
the AUX IN,A/V IN,Auxiliary In, EXT or External In, ComponentVideo In, or S-Video In channel). Check
your TV owner’s manual for details. Details are on pages 11-13.
• If you only used the supplied black RF coaxial cable, details are on pages 8-10. Make sure the TV is set to
channel 3 or 4 (the channel to which the DVD/VCR’s CH3/CH4 switch is set). Or, if you have a Cable
Box/DBS, make sure the TV is set to the Cable Box/DBS output channel (usually 03 or 04).
• Insert a DVD that is playable on this DVD/VCR. Details are on page six.
• PressVCR, then pressVCR/TV to chooseVCR position.TheVCR/TV light will appear on the front of the
DVD/VCR.
• Make sure the DVD/VCR is in DVD mode. Press OUTPUT SELECT so the red DVD light appears on the
front of the DVD/VCR.
Disc cannot play.
• Insert a playable Disc. Details are on page six.
• Place the Disc correctly in the Disc tray. If the Disc is one-sided, place the Disc in the tray with the label
facing up. If the Disc is two-sided, make sure the side you want to play is facing up.
• Clean the Disc. Make sure the Disc is not scratched or warped.
• Cancel the Parental Controls, enter the password, or change the control level. Details are on pages 56-57.
• Make sure the Disc is labelled for use in Region 1 or ALL regions and is NTSC compatible. Details are on
page six.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 75
Helpful Hints (cont’d) 75
There is no sound.
• Connect the audio cables firmly. Make sure the cables are connected to the AUDIO IN jacks on the TV
or Stereo Receiver. Details are on pages 11-13.
• Check the audio settings of the DVD Player. Details are on pages 70-71.
• Check the audio settings of the DVD. For example, you may have selected “soundtrack” playback or an
unavailable sound setting (such as Dolby Digital). Details are on pages 58 and 68-69. Try other sound
options provided in the DVD Disc menu.
• If you used audio cables (instead of only using the supplied black RF coaxial cable) make sure the TV or
Stereo Receiver is set to the correct Audio In channel (usually the AUX IN,Auxiliary In,A/V IN,Audio In,
or External In channel). See your TV or Stereo Receiver owner’s manual for details.
The picture is distorted.
• Connect the DVD/VCR directly to the TV. Details are on pages 8-13. Do not connect the DVD/VCR to a
VCR, then connect theVCR to the TV. Copyright protection systems in theVCR could distort the picture
playing on the DVD/VCR.
• There are some cases where the picture may be distorted slightly; this is not a malfunction of the
DVD/VCR.
• Make sure the Disc is compatible with the DVD Player of the DVD/VCR. Details are on page six.
You cannot change the camera angle of a DVD.
• The DVD might not contain segments recorded from different camera angles. See if multiple angles are
available by referring to the Disc case or DVD Disc menu. Details are on page 55.
You cannot change the audio or subtitle language of a DVD.
• The DVD does not contain audio or subtitles in the desired language. Not all DVDs contain audio or sub-
titles in multiple languages. See if other languages are available by referring to the Disc case or DVD Disc
menu. Details are on pages 55 and 58.
An “X” appears in the top right corner of theTV screen, prohibiting an operation.
• The DVD/VCR prohibits the current operation at the current time or the feature is not available on the
Disc. Details are on page five.
The DVD/VCR switches itself from DVD mode toVCR mode after 35 minutes.
• The DVD/VCR switches itself from DVD mode toVCR mode if Disc playback stops for more than 35
minutes and you press no buttons on the remote control or the DVD/VCR. Details are on pages 66-67.
A screen saver appears on theTV screen during DVD mode.
• The DVD logo will appear on the TV screen if you stop Disc playback for more than five minutes (and
you do not press any buttons on the remote control or the DVD/VCR).The DVD logo prevents damage
to your TV’s picture tube.A prolonged still image, including TV station identification logos or video games,
may damage the picture tube.
You want to use the DVD Player during aVCR timer recording or while theTIMER light
appears or flashes.
y
• Press POWER
to turn on the DVD/VCR. PressVCR/TV to chooseVCR position. (The greenVCR/TV
light will appear.) Press OUTPUT SELECT to choose DVD mode, then continue with other DVD features
as described in this manual. Remember to press the DVD button on the remote control before continu-
ing to use the remote control to operate the DVD Player.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 76
76 Helpful Hints (cont’d)
Power Failure
• VCR timer recordings, clock setting, language selection, and channel setup may be lost if the power fails
for more than one minute. See pages 24-29 to set up the channels, clock, and language again. See pages
34-37 to reprogram your timer recordings.
TheVCR will not record aTV program.
• Put the DVD/VCR inVCR mode. Press OUTPUT SELECT so the greenVIDEO light appears on the front
of the DVD/VCR.
• Check the connections between the DVD/VCR,TV, antenna/cable, and Cable Box/Direct Broadcast
System (if applicable). Details are on pages 8-13.
• Make sure the video cassette has a record tab. Details are on page 31.
• Make sure the DVD/VCR is inVCR position. PressVCR/TV so the greenVCR/TV light appears on the
front of the DVD/VCR. Details are on page 19.
• Check the CH3/CH4 switch. Details are on pages 8-10. Or, if you connected the DVD/VCR to the TV
using audio and video cables, select the correct audio and video in channel at the TV. Details are on pages
11-13.
TheVCR will not perform a timer recording.
• Make sure the recording start and stop times are set correctly. Details are on pages 34-37.
• Make sure a tape is in theVCR and the tape has a record tab. Details are on page 31. If, after programming
a timer recording, you press TIMER SET without putting a tape in the DVD/VCR, the TIMER light will
blink.
• If the record tab on a tape is missing, the DVD/VCR will eject the tape.The TIMER light will blink.
• Press TIMER SET to put the DVD/VCR in standby mode for the timer recording.The TIMER light should
appear on the front of the DVD/VCR.
• Make sure theVCR clock is set. Details are on page 27.
• TheVCR may not perform or continue a timer recording if the power fails for more than one minute.
• If you have a Cable Box/Direct Broadcast System, set timer recordings differently. Details are on page nine.
• Finish programming a timer recording at least five minutes before it is set to begin.
• 12 p.m. is noon; 12 a.m. is midnight.
There is no picture or the picture is noisy or has streaks during video cassette playback.
• Put the DVD/VCR inVCR mode. Press OUTPUT SELECT so the greenVIDEO light appears on the front
of the DVD/VCR.
• If you used the supplied RF coaxial cable to connect the DVD/VCR to the TV, make sure the TV is on the
same channel as the DVD/VCR’s CH3/CH4 switch. Make sure channel 03 or 04 is properly adjusted at
the TV. Or, if you connected the DVD/VCR to the TV using audio and video cables, select the correct
audio and video in channel at the TV. Details are on pages 8-13.
• Make sure the DVD/VCR is inVCR position. PressVCR/TV so the greenVCR/TV light appears on the
DVD/VCR.
• Adjust the tracking. Details are on page 43.
• TVs placed too close to the DVD/VCR can cause interference during tape playback. Move the DVD/VCR
away from the TV.
The Number buttons won’t work forTV channels above 69.
• Select CABLE TV at the TUNER SET UP menu (page 24), then let the DVD/VCR set up the channels.
• Enter channel numbers as a two-digit number. If you want to select channels 100 and above, enter chan-
nel numbers as a three-digit number. If you do not have Cable TV, only channels 2-69 are available. Details
are on page 22.
TV programs cannot be watched normally.
• Put the DVD/VCR inVCR mode, then put it in TV position. Press OUTPUT SELECT so the greenVIDEO
light appears.Then, pressVCR/TV so theVCR/TV light does not appear on the DVD/VCR.
• Check the connections between the DVD/VCR,TV, antenna/cable, and Cable Box/Direct Broadcast
System (if applicable). Details are on pages 8-13.
Poor reception
• You may need to tune your TV again.
The motor (cylinder) rotates even when tape playback is stopped.
• To enable the quick play mechanism, the cylinder will rotate for about five minutes.This is normal.The
quick play mechanism allows the tape mechanism to switch from Stop to Play in one second.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 77
Helpful Hints (cont’d) 77
You can not insert a video cassette.
• Insert the tape, window side up, with the record tab facing you.
• Make sure a tape isn’t already in theVCR by pressing STOP/EJECT on the front of the DVD/VCR.
• Gently push on the center of the tape when putting it in theVCR. Never force the tape into theVCR.
• If a timer recording is set, you cannot insert a tape without a record tab.
You can not remove the tape.
• The DVD/VCR must be inVCR mode. Press OUTPUT SELECT so the greenVIDEO light is on the front
of the DVD/VCR.
• Make sure the power plug is completely connected to a power outlet.
• You have set a timer recording. Press TIMER SET to delay the timer recording.Then, press STOP/EJECT
on the front of the DVD/VCR to eject the tape. Insert another tape and press TIMER SET to reset the
timer recording.
•
Unplug the DVD/VCR power cord for five minutes.Then, plug in the power cord again, then press POWER
ON/OFF on the DVD/VCR. If the tape does not eject, press STOP/EJECT on the DVD/VCR three to five times.
If the tape still does not eject, you may need to have an authorized servicer remove the tape.
DVD/VCR ejects the tape when you press REC/OTR orTIMER SET for a timer recording.
• Make sure the tape has a record tab. Details are on page 31.
Direct Broadcast System Hookups
• Watching one TV channel while recording another may not be possible if you have a DBS hookup.You
may have to set your TV to channel 03 or 04, then make your channel selections at the DBS.
• With many DBS hookups, if you use accessory audio and video cables to connect your DVD/VCR to
your TV, you will have to put your DVD/VCR in Line Input mode (channel 001 or 002).
Line Input mode
• If you accidentally enter Line Input mode (AV FRONT or AV REAR will appear on your TV screen
briefly), press CHANNEL/SKIP j/i (p/o) or the Number buttons to select another channel.
Hi-Fi Stereo Sound
•
During playback, Hi-Fi audio may normally revert to normal audio when you adjust tracking.
• When connecting the DVD/VCR to a stereo TV, you will only get stereo sound if you use audio cables to
connect the DVD/VCR AUDIO OUT jacks on the DVD/VCR to the AUDIO IN jacks on your TV, and if
the TV is in Line (Auxiliary) Input mode. See your TV owner’s manual for details.
• When you connect the DVD/VCR AUDIO OUT jacks on the DVD/VCR to the AUDIO IN jacks on your
TV, the stereo light on the TV might not glow. If the status display indicates you are receiving stereo, you
are. Details are on page 44.
• Only tapes recorded in Hi-Fi audio will play in Hi-Fi audio.Tapes recorded in normal audio will play in
monaural audio.
Cleaning theVideo Heads
• Your DVD/VCR automatically cleans the video heads of theVCR each time you insert a tape. However,
the heads may become dirty. If so, have an authorized servicer clean the video heads. Eventually, the heads
may need to be replaced.
The playback picture is too dim, too bright, or fluctuates in brightness.
• Some programs may be broadcast with copyright protection technology in order to protect the rights of
copyright owners.This technology is used on programs that are recorded on video cassettes or DVDs, as
well as some programs broadcast by antenna/cable/satellite television channels. Programs broadcast with
copyright protection may not record clearly. Likewise, if you play a tape that is a recording of a copyright
protected program, the picture may not be clear.Tapes of copyright protected programs may have a pic-
ture that is dark or dim, or the brightness of the picture may fluctuate.Therefore, avoid recording or play-
ing copies of copyright protected programs.
• This DVD/VCR incorporates copyright protection technology that is protected by method claims of cer-
tain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection technology must be authorized by Macrovision
Corporation and is intended for home and other limited viewing uses only, unless otherwise authorized
by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Channels above 13 cannot be received.
• Select CABLE TV at the TUNER SET UP menu (page 24), then let the DVD/VCR set up the channels.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 78
78 Limited Warranty
Digital Video Disc Player / Video Cassette Recorder Combination
90 days Free Product Exchange / 91 days–One Year Reduced-Cost Exchange
WHO IS COVERED?
MAKE SUREYOU KEEP...
You must have proof of the date of purchase to exchange
your product.A sales receipt or other document showing
the date that you purchased the product is considered such
proof.
Please keep your sales receipt or other document showing
proof of date of purchase.Attach it to the owner’s manual
and keep both nearby.Also keep the original box and pack-
ing material in case you need to return your product.
WHAT IS COVERED?
BEFORE EXCHANGINGTHE PRODUCT...
Warranty coverage begins the day you buy your product. For Please check your owner’s manual before exchanging the
90 days thereafter, you may exchange the defective product
for a new or renewed product through Philips.
product.Adjustments of the controls discussed there may
save you time and money.
From 91 days to one year from the date of purchase, you will
pay a preset exchange fee to obtain a new or renewed
product. Follow the exchange procedures on the next page.
This exchange opportunity ends one year after the date of
purchase.The replacement product is covered only for the
warranty period of the original product.When the warranty
LIMITATION OF LIABILITY AND REMEDY...
PHILIPS IS NOT LIABLE UNDER ANY CIRCUMSTANCES
FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, HOWSOEVER
INCURRED, EVEN IF NOTIFIED OFTHE POSSIBILITY OF
on the original product expires, the warranty on all replaced SUCH DAMAGES.
products also expires.
TOTHE EXTENT PERMITTED BY LOCAL LAW,THE
When it is necessary for you to ship the product to Philips for
exchange, you will pay the shipping costs for shipment to Philips.
Philips will pay the shipping costs when returning a product to
you.
REMEDIES PROVIDED INTHISWARRANTY STATEMENT
AREYOUR SOLE AND EXCLUSIVE REMEDY.
THIS LIMITEDWARRANTY GIVESYOU SPECIFIC LEGAL
RIGHTS,ANDYOU MAY ALSO HAVE OTHER RIGHTS
WHICHVARY FROM STATE/PROVINCETO
STATE/PROVINCE.
WHAT IS EXCLUDED?
Your warranty does not cover:
•
•
shipping charges to return defective product.
labor charges for installation or setup of the product,
adjustment of customer controls on the product, and
installation or repair of antenna systems outside of the
product.
product repair and/or part replacement because of
improper installation, abuse, neglect, misuse, accident,
unauthorized repair or other cause not within the con-
trol of Philips.
TO EXCHANGEYOUR PRODUCT INTHE U.S.A.,
PUERTO RICO, OR U.S. VIRGIN ISLANDS...
FOLLOWTHE INSTRUCTIONS STATED PREVIOUSLY IN
THE “WHAT IS COVERED” SECTION, OR REFERTOTHE
EXCHANGE INSTRUCTIONS ONTHE NEXT PAGE.
INTHE U.S.A., PUERTO RICO,AND U.S.VIRGIN ISLANDS,
ALL IMPLIEDWARRANTIES, INCLUDINGTHE IMPLIED
WARRANTIES OF NON-INFRINGEMENT, MER-
CHANTABILITY AND FITNESS FOR A PARTICULAR PUR-
POSE,ARE SPECIFICALLY DISCLAIMED,ANDTOTHE
EXTENT INCONSISTENTWITH LAW OFTHE LOCALI-
TY OFTHE USER, LIMITED IN DURATIONTOTHE
•
•
•
reception problems caused by signal conditions or cable
or antenna systems outside the product.
a product that requires modification or adaptation to
enable it to operate in any country other than the coun- DURATION OFTHIS EXPRESSWARRANTY. BECAUSE
try for which it was designed, manufactured, approved
and/or authorized, or repair of products damaged by
these modifications.
SOME STATES DO NOT ALLOW LIMITATIONS ON
HOW LONG AN IMPLIEDWARRANTY MAY LAST,THIS
LIMITATION MAY NOT APPLYTOYOU.
•
incidental or consequential damages resulting from the
product. (Some states do not allow the exclusion of inci- TO EXCHANGE A PRODUCT IN CANADA...
dental or consequential damages, so the above exclusion Please contact Philips at:
may not apply to you.This includes, but is not limited to,
prerecorded material, whether copyrighted or not copy-
righted.)
damage caused by the use of non-VHS tapes or tapes
that have not been tested and labeled for use in two,
four, six, and eight hourVHS recorders.
1-800-661-6162 (French Speaking)
1-800-531-0039 (English or Spanish Speaking)
In Canada, this warranty is given in lieu of all other war-
ranties.There are no other warranties, express or implied,
including any implied warranties of merchantability or fitness
for a particular purpose.
•
•
a product that is used for commercial or institutional
purposes (including but not limited to rental purposes).
REMEMBER...
Please record below the model and serial numbers found on
the product.Also, please fill out and mail your warranty reg-
istration card promptly. It will be easier for us to notify you
if necessary.
MODEL #_________________________________
SERIAL #__________________________________
WHERE IS EXCHANGE AVAILABLE?
Warranty exchange is available in all countries where the
product is officially distributed by Philips. In countries where
Philips does not distribute the product, the local Philips ser-
vice organization will attempt to exchange the product,
although there may be a delay if the appropriate product is
not readily available.
Philips, P.O. Box 520890, Miami, FL 33152 (402) 536-4171
EL6473E003 /3-02
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 79
Limited Warranty (cont’d) 79
EXCHANGE INSTRUCTIONS
To exchange your product with Philips (per the warranty conditions stated previously), remember:
•
•
If you exchange the product within 90 days of the original purchase, there is no cost to you.
If you exchange the product more than 90 days after but less than one year after the day of original purchase,
contact Philips at 1-800-531-0039 to determine the preset cost for exchange.
•
If you do not have your original sales receipt, or if you have any questions, call Philips at 1-800-531-0039.
To obtain a replacement product from Philips:
1. Contact Philips at 1-800-531-0039 to determine the cost for exchange.
2. Complete the Exchange Form below.
3. Pack the product and its accessories in the original box or a suitable alternative.You will receive replacement
accessories with your replacement product. For packing details, call 1-800-531-0039.
4. Put the completed Exchange Form, a copy of the original sales receipt, and the proper payment amount into
an envelope. DO NOT SEND CASH. Do not staple or clip these items together. Label the envelope “Return
Documents Enclosed.” Place this envelope in the box with the product.
5. Seal the box with packing tape and return the product via United Parcel Service (UPS), insured and freight
prepaid, to:
Philips Recovery Center
Rojas 6
12420 Mercantile Avenue
El Paso,TX 79928
ATTENTION: DVD/VCR COMBINATION EXCHANGE
A replacement will be sent to you via UPS within 48 business hours of Philips’ receipt of the product.
When it is necessary for you to ship the product to Philips for exchange, you will pay the shipping costs for shipment to
Philips. Philips will pay the shipping costs when returning a product to you.
EXCHANGE FORM
Your Address (street address to which replacement should be delivered, no P.O. boxes allowed):
Name:
Street Address:
City:
Phone (day):
Apt. #:
State/Province:
Phone (night):
Zip Code/Postal Code:
Exchange Fee:
+ SalesTax:
= Total:
Method of Payment: (Check one. Please, no cash or CODs.)
_____ Check/Money order
Check/Money order No.
Account number
Expiration date
__________
__________
__________
__________
_____ American Express
_____ Visa
_____ Novus/Discover
_____ Mastercard
___________________________
___________________________
___________________________
___________________________
Signature: _____________________________________________________________
Detailed reason for return, use additional paper if necessary: _____________________________________________
_______________________________________________________________________________________________
Model Number
Serial Number
Remember, the return box should include the following:
•
•
The product,
•
Accessories supplied with the product, and
Completed Exchange Form and sales receipt, • Payment, if applicable.
Download from Www.Somanuals.com. All Manuals Search And Download.
H9231CD(EN).QX3 02.9.5 7:14 PM Page 80
80 Information Index
ac power cord . . . . . . . . . . . . . . . . .21 hookups
safety precautions . . . . . . . . . . . . . . .3
angle button . . . . . . . . . . . . . . . .22, 55
ant-in (antenna in) jack . . . . . .8-13, 21
ant-out (antenna out) jack . . .8-10, 21
arrow buttons . . . . . . . . . . . . . . . . .22
audio button . . . . . . . . . . . . . . . .23, 58
cable box/dbs . . . . . . . . . . . . . .9-10 screen saver . . . . . . . . . . . . . . . . . . .75
component video . . . . . . . . . . . . .12 search mode/time search button
s-video . . . . . . . . . . . . . . . . . . . . .11
. . . . . . . . . . . . . . . . . .23, 41, 50-51
stereo receiver . . . . . . . . . . . . . .13 searching . . . . . . . . . . . . . . . . . . .42, 49
tv . . . . . . . . . . . . . . . . . . . . . . .8-13 second audio broadcast
audio cd . . . . . . . . . . . . . . . . . . . . . . .6 language (dvd) . . . . . . . . . . . . . . .68-69
audio in/out jacks . .11, 12, 20, 21, 38, 44 language (vcr) . . . . . . . . . . . . . . . . . .29
receiving . . . . . . . . . . . . . . . . .44-45
recording . . . . . . . . . . . . . . . .44-45
audio settings . . . . . . . . . . . . . . . . . .70 line input mode . . . . . . . . . . . . .38, 73 sensor (remote) . . . . . . . . . . . . . . . .20
automatic
playback . . . . . . . . . . . . . . . . . . . .43 lp . . . . . . . . . . . . . . . . . . . . . . . .36, 73
rewind, eject . . . . . . . . . . . . . . . . .43
long play . . . . . . . . . . . . . . . . . . .36, 73 settings (dvd)
audio . . . . . . . . . . . . . . . . . . . . . .70
language . . . . . . . . . . . . . . . . .68-69
a-b repeat . . . . . . . . . . . . . . . . . . . .53 marker button . . . . . . . . . . . . . .22, 54 setup button . . . . . . . . . . . . . . . . . .23
a-b repeat button . . . . . . . . . . . .22, 53 memory button . . . . . . . . . . . . .23, 40 slow
menus . . . . . . . . . . . . . . . . . . . . . .5, 48
button . . . . . . . . . . . . . . . . . .23, 42
motion . . . . . . . . . . . . . . . . . .42, 59
batteries . . . . . . . . . . . . . . . . . . . . . .14 mode button . . . . . . . . . . . . .23, 60-61
blue background . . . . . . . . . . . . . . .47 mp3 display information . . . . . . . . . .63 slp . . . . . . . . . . . . . . . . . . . . . . . .36, 73
mp3 playback . . . . . . . . . . . . . . . . . .62 source button . . . . . . . . . . . . . . . . .20
camera angle . . . . . . . . . . . . . . . . . .55 mp3 track selection . . . . . . . . . . . . .63 sp . . . . . . . . . . . . . . . . . . . . . . . .36, 73
cassette compartment . . . . . . . . . . .19
speed button . . . . . . . . . . . . . . .23, 31
ch3/ch4 switch . . . . . . . . . . . .8-10, 21 number buttons . . . . . . . . . . . . . . . .22 standard play . . . . . . . . . . . . . . .36, 73
channel status display (vcr) . . . . . . . . . . . . . .30
adding . . . . . . . . . . . . . . . . . . . . . .25 ok button . . . . . . . . . . . . . . . . . . . . .22 stereo broadcast
deleting . . . . . . . . . . . . . . . . . . . .25 on-screen status displays (vcr) . . . . .30
hookups . . . . . . . . . . . . . . . . . . .44
receiving . . . . . . . . . . . . . . . .44-45
recording . . . . . . . . . . . . . . .44-45
reviewing . . . . . . . . . . . . . . . . . . .26 one-touch recording . . . . . . . . . . . .33
selection . . . . . . . . . . . . . . . . . . . .22 open/close button . . . . . . . . . . .17, 20
setup . . . . . . . . . . . . . . . . . . . .15, 24 output select button . . . . . . . . . . . .23 stereoTV hookups . . . . . . . . . . . . .11
o/p buttons . . . . . . . . . . . . .20, 43
channel/skip H/G (o/p)
still picture . . . . . . . . . . . . . . . . .42, 52
parental controls . . . . . . . . . . . . .56-57 stop button . . . . . . . . . . . . . . . .20, 23
buttons . . . . . . . . . . . . . . . . . .23, 51 password . . . . . . . . . . . . . . . . . . . . .56 stop/eject button . . . . . . . . . . . . . . .20
chapters . . . . . . . . . . . . . . . . . . . . . .50 pause button . . . . . . . . . .23, 31, 42, 52 subtitle button . . . . . . . . . . . . . .22, 55
clear button . . . . . . . . . . . . . . . .23, 40 play button . . . . . . . . . . . .16-17, 20, 22 super high speed searching . . . . . . .42
clock setting . . . . . . . . . . . . . . . . . . .27 playing discs . . . . . . . . . . . . . . . . . . .17 super long play . . . . . . . . . . . . . .36, 73
coaxial (digital audio out)
jack . . . . . . . . . . . . . . . . . .13, 21, 73 power
playing tapes . . . . . . . . . . . . . . . . . . .16 s-video out jack . . . . . . . . . . . . .11, 21
component video out jacks .12, 21, 73
connections . . . . . . . . . . . . . . . . .7-13
contents, table of . . . . . . . . . . . . . . . .4
controls
button . . . . . . . . . . . . . . . . . . . . .22 table of contents . . . . . . . . . . . . . . . .4
cord . . . . . . . . . . . . . . . . . . . . . . .21 tape
light . . . . . . . . . . . . . . . . . . . . . . .19
duplication . . . . . . . . . . . . . . . . . .38
eject . . . . . . . . . . . . . . . . .20, 43, 77
speed . . . . . . . . . . . . . . . . . . .36, 73
power on/off button . . . . . . . . . . . .20
dvd/vcr . . . . . . . . . . . . . . . . . .18-21 programmed playback (audio cd) . . .60
remote . . . . . . . . . . . . . . . . . .22-23 programmed playback (mp3) . . . . . .64 time search . . . . . . . . . . . . . . . . . . .41
copyright protection . . . . . . . . . .38, 77
timer button . . . . . . . . . . . . . . . . . .20
counter only mode . . . . . . . . . . . . .30 random playback (audio cd) . . . . . . .61 timer light . . . . . . . . . . . . . . . . . . . .19
cst. in light . . . . . . . . . . . . . . . . . . . .19 random playback (mp3) . . . . . . . . . .64 timer recording
real-time tape counter . . . . . . . . . . .40
daylight-savings time . . . . . . . . . . . . .28 rear panel . . . . . . . . . . . . . . . . . . . . .21
disc/menu button . . . . . . . . . . . .23, 48 rec (record) button . . . . . . . . . . . . .20
cancelling . . . . . . . . . . . . . . . . . .37
checking . . . . . . . . . . . . . . . . . . .37
setting . . . . . . . . . . . . . . . . . .34-36
display/status/exit button . . .22, 30, 65 rec (record) light . . . . . . . . . . . . . . .19 timer set button . . . . . . . . . . . . .22, 36
display panel . . . . . . . . . . . . . . . .18-19 rec/otr button . . . . . . . . . . . .23, 31, 33 title button . . . . . . . . . . . . . . . . .23, 48
duplication . . . . . . . . . . . . . . . . . . . .38 recording
titles . . . . . . . . . . . . . . . . . . . . . .48, 50
dvd button . . . . . . . . . . . . . . . . . . . .22
dvd video . . . . . . . . . . . . . . . . . . . . . .6
basic . . . . . . . . . . . . . . . . . . . . . . .31 tracking . . . . . . . . . . . . . . . . . . . . . .43
one channel/watching another . . .32 tracks . . . . . . . . . . . . . . . . . . . . . . . .51
prevention . . . . . . . . . . . . . . . . . .31 trusurround . . . . . . . . . . . . . . . . . . .71
timer . . . . . . . . . . . . . . . . . . . .34-37 tv hookups . . . . . . . . . . . . . . . . . .7-13
ejecting a tape . . . . . . . . . . . .20, 43, 77
remote control
tv position . . . . . . . . . . . . . . . . .19, 23
fast forward . . . . . . . . . . . . . . . .42, 49
ff (fast forward) button . . . . . . . . . .22
f.fwd (fast forward) button . . . . . . .20
buttons . . . . . . . . . . . . . . . . . .22-23
sensor . . . . . . . . . . . . . . . . . . . . .20 vcr button . . . . . . . . . . . . . . . . . . . .23
using . . . . . . . . . . . . . . . . . . . . . . .14 vcr position . . . . . . . . . . . . . . . .19, 23
front panel . . . . . . . . . . . . . . . . . . . .20 repeat button . . . . . . . . . . . . . . .22, 53 vcr/tv button . . . . . . . . . . . . . . . . . .23
repeat play (tape) . . . . . . . . . . . . . . .39 vcr/tv light . . . . . . . . . . . . . . . . . . . .19
glossary . . . . . . . . . . . . . . . . . . . . . .73 repeat playback (discs) . . . . . . . . . . .53 video in/out jacks . .11, 13, 20, 21, 38, 44
rerecording . . . . . . . . . . . . . . . . . . .38
head cleaner . . . . . . . . . . . . . . . .72, 78 resuming play . . . . . . . . . . . . . . . . . .52 warranty . . . . . . . . . . . . . . . . . . .78-79
helpful hints . . . . . . . . . . . . . . . .74-77 return button . . . . . . . . . . . . . . . . . .22
hi-fi stereo sound . . . . . . . . . . . . . . .46 reverse searching . . . . . . . . . . . .42, 49 zoom button . . . . . . . . . . . . . . .22, 59
rew (rewind) button . . . .20, 23, 42, 49
rf coaxial cable . . . . . . .8-13, 38, 44, 73
This owner’s manual is made of recyclable
materials. Remember to recycle!
IB8372B001 Printed In China
0VMN03223 / H9231CD * * * * *
Download from Www.Somanuals.com. All Manuals Search And Download.
|