DVD740VR/
Digital Video Disc Player &
Video Cassette Recorder
001
Read this manual first!
Congratulations on purchasing this Philips product.
Weíve included everything you need to get started.
If you have any problems, Philips Representatives can
help you get the most from your new product by explaining:
• Hookups,
• FirstTime Setup, and
• Feature Operation.
Do not attempt to return this product to the store.
For fast help, call us first!
Tel: see back page of your manual
Thank you for making Philips a part of your home!
R
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
VCR features . . . . . . . . . . . . . . . . .23-24
Auto Return . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Picture Select . . . . . . . . . . . . . . . . . . . . . . . . . .22
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Index Search . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Quick Find . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Special Effect Playback . . . . . . . . . . . . . . . . . . . .24
Automatic Operation Features . . . . . . . . . . . . .24
Hi-Fi Stereo Sound System . . . . . . . .25
SELECTING THE SOUND MODE . . . . . . . . . . .25
Introduction
Environmental Information . . . . . . . . .4
Supplied accessories . . . . . . . . . . . . . . .4
Safety Information . . . . . . . . . . . . . . . .4
Symbols Used in this Manual . . . . . . . .4
Functional Overview
Front Panel . . . . . . . . . . . . . . . . . . . . . .5
Display Front Panel . . . . . . . . . . . . . . .6
Display Message . . . . . . . . . . . . . . . . . .6
Rear Panel . . . . . . . . . . . . . . . . . . . . . .7
Remote Control . . . . . . . . . . . . . . . . . .8
Remote Control (cont’d) . . . . . . . . . . .9
DVD Operation
Basic Playback . . . . . . . . . . . . . . . . . . 26
General Features . . . . . . . . . . . . . . . .26
Disc menus . . . . . . . . . . . . . . . . . . . . . . .26
Title Menu . . . . . . . . . . . . . . . . . . . . . . . .26
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Step by Step playback . . . . . . . . . . . . . . .27
Resume . . . . . . . . . . . . . . . . . . . . . . . . . .27
Fast Forward / Reverse Search . . . . . . . .27
Slow Motion . . . . . . . . . . . . . . . . . . . . . .27
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Track . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Title/chapter . . . . . . . . . . . . . . . . . . . . . .28
Time Search . . . . . . . . . . . . . . . . . . . . . .28
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Repeat A-B . . . . . . . . . . . . . . . . . . . . . . .28
Programme . . . . . . . . . . . . . . . . . . . . . . .28
Random Playback . . . . . . . . . . . . . . . . . . .28
MP3 Playback . . . . . . . . . . . . . . . . . . . . . .29
Display Information (MP3) . . . . . . . . . . . .29
Track Selection (MP3) . . . . . . . . . . . . . . .29
Random Playback (MP3) . . . . . . . . . . . . .29
Programmed (MP3) . . . . . . . . . . . . . . . . .29
Audio Language . . . . . . . . . . . . . . . . . . . .29
Stereo Sound Mode . . . . . . . . . . . . . . . . .29
Subtitle Language . . . . . . . . . . . . . . . . . . .30
Camera Angle . . . . . . . . . . . . . . . . . . . . .30
Changing the On-Screen Display . . . . . . .30
Parental Control . . . . . . . . . . . . . . . . . . .30
Marker Setup Screen . . . . . . . . . . . . . . . .31
Setting Up your DVD/VCR
Basic Connections . . . . . . . . . . . . . . .10
Connecting to aTV . . . . . . . . . . . . . .10
Simplest connection using only supplied
black RF coaxial cable . . . . . . . . . . . .11
Connecting to an Audio System . . . .11
Connecting to Optional Equipment
(for DVD features) . . . . . . . . . . . . . . .12
External Input Mode
(forVCR features) . . . . . . . . . . . . . . .12
Inserting batteries into the Remote
Control . . . . . . . . . . . . . . . . . . . . . . . .12
Using the Remote Control . . . . . . . . .12
PlayableVideo CassetteTapes . . . . . .13
Recording Prevention . . . . . . . . . . . . . . . . . . . .13
Turning on your DVD/VCR . . . . . . . . .13
Video Channel Setting . . . . . . . . . . . .13
Automatic Channel Setup . . . . . . . . .14
Manual Channel Preset . . . . . . . . . . .14
Adding/Deleting channels . . . . . . . . . .15
Channel Reprogramming . . . . . . . . . .15
Setting the Clock . . . . . . . . . . . . . . . .16
Manual Clock Setting . . . . . . . . . . . . . . . . . . . . .16
Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . .16
Changing the Language . . . . . . . . . . .17
A Status Displays . . . . . . . . . . . . . . . .17
DVD Setup
Audio Setting . . . . . . . . . . . . . . . . . . .32
Display Setting . . . . . . . . . . . . . . . . . .32
TruSurround Setting . . . . . . . . . . . . .32
Language Setting . . . . . . . . . . . . . . . .33
VCR Operation
Playing aVideo CassetteTape . . . . . .17
Recording aVideo CassetteTape .17–21
Recording One Channel/Watching
Another . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
One-Touch Recording . . . . . . . . . . . . . . . . . . . .18
Timer Recording . . . . . . . . . . . . . . . . . . . . . . . 18
Checking or cancelling Timer Recording . . . . . .19
Hint for Timer Recording . . . . . . . . . . . . . . . . .19
VPS (Video Programme System)/ PDC (Programme
Delivery Control) . . . . . . . . . . . . . . . . . . . . . . .19
SHOWVIEW® Guide Channel Set . . . . . . . . . . . . .20
Timer Recording using the SHOWVIEW System . .21
Rerecording (Tape Duplication) . . . . .22
Information
Specifications . . . . . . . . . . . . . . . . . . .34
Maintenance . . . . . . . . . . . . . . . . . . . .34
Troubleshooting . . . . . . . . . . . . . .35-36
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Thank you for purchasing this Philips DVD/
VCR player.This Owner’s Manual explains the
basic operation of this DVD/VCR.
G In cabinet, allow about 2.5cm (1 inch) of free
space all around the player for adequate venti-
lation.
G Do not expose your player to extreme of
temperature or humidity.
Environmental Information
G If the DVD/VCR is brought directly from a
cold to a warm location, or is placed in a very
damp room, moisture may condense on the
lens of the disc unit inside the DVD/VCR
player. Should this occur, the DVD/VCR would
not operate normally. Leave the player on for
about one hour with no disc in the DVD/VCR
until normal playback is
All unnecessary packaging has been omitted.
Packaging has been made easy to separate into
three materials: cardboard (box), polystyrene
foam (buffer) and polyethylene (bags, protec-
tive foam sheet).
Your DVD/VCR consists of materials which
can be recycled and reused if disassembled by
a specialised company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old equip-
ment.
possible.
G The mechanical parts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.
G Never spill liquid of any kind on this unit. If liq-
uid is spilled into the unit, consult qualified
service engineer.
Supplied accessories
– Remote control
–
Batteries (two AA size) for remote control
G When the DVD/VCR is switched to
Standby mode, it is still consuming some
power. To disconnect the system from
the power supply completely, remove
the AC power plug from the wall socket.
– SCART cable (not available for all versions)
– Audio Cable
– RF Coaxial cable
– Owner’s Manual
Safety Information
Symbols Used in this Manual
G Before operating the DVD/VCR, check that
the operating voltage indicated on the type-
plate (or the voltage indication beside the
voltage selector) is identical with the voltage
of your local power supply. If not, please
consult your dealer.
The below symbols appear in some headings
and notes with the following meanings:
VCR
– Description refers to playback of video cassette tapes
G Place the DVD/VCR on a flat, hard and stable
surface.
G There must be sufficient room in front of the
player for the disc tray to be opened.
DVD
CD
– Description refers to playback of DVD-video discs
– Description refers to playback of Audio CDs
– Description refers to playback of MP3 files
MP3
Helpful Hints!
G Some DVD video discs require specific
functions or allow only limited functions
during playback.
G “
” may appears on theTV screen
which means that the function is not avail-
able on that specific DVD video disc.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Overview
Front Panel
STANDBY-ON
– to switch the player to ON or OFF
TIMER
– to put the DVD/VCR into standby
mode for a timer recording
DISPLAY
– shows the current status of the player
PROG
– InVCR mode, to change TV channels,
to adjust tracking during playback or
to remove vertical jitter in a still
picture
DiscTray
– insert a disc here
Remote Sensor
– receive signals from remote control
REC (RECORD)
– Press once to start recording, repeat-
edly to start an One-Touch Recording
Cassette Compartment
– insert a tape here
STANDBY-ON
PAL
VIDEO
L
PROG
DVD
OPEN/CLOSE
STOP PREV
PLAY
NEXT
DVD
VIDEO
STOP/EJECT
REW
PLAY
F.FWD REC
TIMER
AUDIO
R
SOURCE
CST.IN
SEARCH
A STOP/EJECT (VCR)
SOURCE (OUTPUT)
– when playback is stopped, press to
– to select between DVD andVCR
eject the tape
mode
B PLAY (VCR)
– to play a tape
j PREV / i NEXT (DVD)
– goes to previous or next chapter or
track during playback; press and hold
for three seconds for a forward and
reverse search
h REW / g F.FWD (VCR)
– rewind or fast forward at high speed
during playback is stopped
B PLAY (DVD)
– to start, pause or resume disc playback
AUDIO IN
– connect to AUDIO OUT of an audio
source
C STOP (DVD)
– to stop playback
VIDEO IN
– connect toVIDEO OUT of a video
source
A OPEN/CLOSE
–
to open/close the disc tray
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Overview
Display front Panel
STANDBY-ON
PAL
VIDEO
L
PROG
DVD
OPEN/CLOSE
ST OP PREV
PLAY
NEXT DVD
VIDEO
ST OP/EJECT
REW
PLAY
F.
F
WD REC
TIMER
AUDIO
R
SOURCE
CST.IN
SEARCH
STANDBY-ON
VIDEO
L
PROG
DVD
VIDEO
STOP/EJECT
REW
PLAY
F. F WD REC
TIMER
A
UDIO
SOURCE
CST.IN
R
REC
TIMER
– light appears during recording, it flashes
when a recording is paused
– light appears when DVD/VCR is in
standby mode or off for a timer
recording/One-Touch Recording
DVD (green light)
– light appears when DVD/VCR in DVD
mode.You can only watch DVDs when
the green DVD OUTPUT light is on.
CST.IN
– light appears when a tape is in the
DVD/VCR
VIDEO (green light)
– light appears when DVD/VCR inVCR
mode.You can only watch tapes when
the greenVCR OUTPUT light is on.
STANDBY-ON
– light appears when power is on
Display Message
Power is turning on.
Appears after the disc tray closes if the tray is empty, if
there is an error reading the disc, or if an unacceptable
disc is installed.
Tray is opening or is open.
Tray is closing.This also may appear as the Player tries
to load a Disc.
Disc is loading.
Power is turning off.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Overview
Rear Panel
MAINS (AC Power Cord)
– connect to a standard AC outlet
AERIAL
– connect to an antenna or cable
OPTICAL (Digital audio out)
– connect to digital (optical) audio
equipment
VCR (AV2 Decoder)
– connect SCART cable from another
VCR, camcoder or an audio/video
source
COAXIAL (Digital audio out)
– connect to AUDIO inputs of a digital
(coaxial) audio equipments
DVD/VCR (AV1TV)
– connect SCART cable to a TV
AERIAL
DVD OUTPUT ONLY
ANALOG
AUDIO OUT
S-VIDEO
OUT
DIGITAL
AUDIO OUT
VCR
AV2 (DECODER)
DVD/VCR
AV1 (TV)
RF-OUT
L
COAXIAL OPTICAL
R
RF OUT
AUDIO OUT (Left/Right)
– connect to AUDIO inputs of an
amplifier, receiver or stereo system
– use supplied RF coaxial cable to con-
nect to the ANTENNA IN on your TV,
cable box or Direct Broadcast System
S-VIDEO OUT
– connect to a TV with S-Video inputs
Caution: Do not touch the inner pins of the jacks on the rear panel. Electrostatic
discharge may cause permanent damage to the unit.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Overview
Remote Control
TIMER SET
– to put the DVD/VCR into standby mode for a timer recording
SETUP
– to access or remove the DVD setup menu (DVD)
AUDIO
– to choose audio languages or sound modes (DVD)
– to choose sound modes (VCR)
SUBTITLE
STANDBY-ON
TIMER SET
SETUP
REC
AUDIO SUBTITLE
ANGLE
REPEAT
REPEAT
A-B
C-RESET
CLEAR
SKIP/
–
SKIP/
P
P
+
TITLE
DVD
MODE
RETURN
– subtitle language DVD selector (DVD)
ANGLE
DISPLAY
VCR
OK
– select DVD camera angle (DVD)
DISC
MENU
SKIP/P (j/ + /i/ – )
– to skip chapter/tracks (DVD)
– to change TV channels (VCR)
C.RESET/CLEAR
STOP
PLAY
REW
FF
– to reset the setting (DVD)
– to reset the counter (VCR)
PAUSE
SHOWVIEW
SYSTEM
1
4
7
2
3
6
9
DVD
– press before using the remote control for DVD features
DISPLAY
– to access or remove the display screen during DVD or
Audio CD playback(DVD)
5
SPEED
SLOW
8
0
DAILY/
WEEKLY
+ 10
INDEX
SEARCH
TIME
SEARCH
SEARCH
MODE
ZOOM
– to access or removeVCR’s on-screen status display(VCR)
VCR
QUICK-FIND
– press before using the remote control forVCR features
DISC MENU
– to display the menu of the DVD disc or to accessVCR
menu
{
B
K
L
– (left/right/up/down) select an item in the menu (DVD)
0-9 numerical key pad/+10
– select numbered items in a menu (DVD)
– use +10 button to enter number 10 and above (DVD)
DAILY/WEEKLY
– Press to select once, daily, everyday, or weekly when you programme
the automatic timer recording using the SHOWVIEW system (VCR)
ZOOM
– enlarge DVD video image (DVD)
SEARCH MODE/QUICK-FIND
– to access or remove search display (DVD)
– to skip to the beginning of next programme(VCR)
INDEX SEARCH
– to fast forward or rewind the tape at index number (VCR)
TIME SEARCH
– to fast forward or rewind the tape at specific length of time
(VCR)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Overview
Remote Control (cont’d)
STANDBY-ON
y
– switch DVD/VCR ON or OFF
STANDBY-ON
TIMER SET
REC
– press once to start recording or repeatedly to start (VCR)
REPEAT
SETUP
REC
AUDIO SUBTITLE
REPEAT
ANGLE
REPEAT
– repeat chapter, track, title, disc (DVD)
REPEAT (A-B)
A-B
C-RESET
CLEAR
SKIP/
—
SKIP/
P
P
+
– repeat a specific segment (DVD)
TITLE
DVD
MODE
RETURN
TITLE
– to display title menu of a disc (DVD)
MODE
DISPLAY
VCR
OK
DISC
MENU
– to set up programmed or random playback (Audio CD)
– to set SRS TruSurround (DVD)
STOP
PLAY
RETURN
– to return previous or remove setup menu (DVD)
REW
FF
PAUSE
OK
SHOWVIEW
SYSTEM
– acknowledge menu selection (DVD)
1
4
7
2
5
3
6
9
STOP ( C / L )
– to stop a DVD disc playback (DVD)
– to stop playback, recording or to select an item in the
VCR menu (VCR)
SPEED
SLOW
8
0
DAILY/
WEEKLY
+ 10
INDEX
SEARCH
TIME
SEARCH
SEARCH
MODE
ZOOM
PLAY ( B / K )
QUICK-FIND
– to start a DVD disc playback (DVD)
– to start a tape playback or to select an item in the
VCR menu (VCR)
REW ( h / { )
– to view DVD picture in fast reverse motion (DVD)
– to rewind the tape (VCR)
PAUSE ( k)
– pause playback temporarily / frame-by-frame playback
(DVD)
– pause playback and during recording temporarily (VCR)
FF ( g / B )
– to view DVD picture in fast forward motion (DVD)
– to fast forward the tape (VCR)
SHOWVIEW
– to programme timer recording with
the SHOWVIEW system (VCR)
SYSTEM
– Doesn’t work in this model
SPEED
– to selectVCR’s recording speed (SP or LP) (VCR)
SLOW
– to view tape playback in slow motion (VCR)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up your DVD/VCR
Basic Connections
Connecting to aTV
G Please refer to the instruction books of your
TV,VCR, Stereo System or other devices as
necessary to make the best connections.
G Make one of the following connections,
depending on the capabilities of your existing
equipment.
1 Connect the antenna or cable to the AERIAL
of your DVD/VCR.
2 Connect the DVD/VCR (AV1 TV) on the
DVD/VCR to the corresponding connector on
the TV.
Note:
The following guidelines are options for the
best picture and sound quality available on
your DVD/VCR.
– Ensure that the “TV” indication on
SCART cable is connected to theTV set
and “DVD” indication on SCART cable is
connected to the DVD/VCR.
Picture
1 Use SCART RGB Output (DVD/VCR(AV1
TV)) for best picture quality (for DVD fea-
tures).
If your TV is not equipped with a SCART
input, you can select the following connec-
tion:
2 Use S-VIDEO Output for the better picture
quality (for DVD features only).
If yourTV has a S-Video input connec-
tor,
3 Use SCART Composite Output for good pic-
ture quality (for DVD andVCR features).
4 If your TV only has a RF-style (Antenna IN or
75 ohm) input, use the RF OUT for connec-
tion and set your TV to channel 22 ~ 69 with
the same channel for DVD/VCR is set (for
DVD andVCR features).
1 Connect the antenna or cable to the AERIAL
of your DVD/VCR.
2 Connect the S-Video out on the DVD/VCR to
the S-Video in on the TV.
3 Connect the ANALOG AUDIO OUT on the
DVD/VCR to the Left and Right audio in on
the TV.
Sound
1 Digital audio connections provide the clearest
sound. Connect the DVD/VCR DIGITAL
AUDIO OUT (either COAXIAL or OPTI-
CAL) to your amplifier or receiver (for DVD
features only).
AN
TE
NN
A
IN
2 Use SCART Output (DVD/VCR(AV1 TV)) for
better sound quality (for DVD andVCR fea-
tures).
OR
If digital connections are not possible, connect
the DVD/VCR ANALOG AUDIO OUT(Left
and Right) to your amplifier, receiver, stereo or
TV (for DVD features only).
Warning!
AERIAL
DVD OUTPUT ONLY
– Never make or change connections with
the power switched on.
ANALOG
AUDIO OUT
S-VIDEO
OUT
DIGITAL
AUDIO OUT
VCR
AV2 (DECODER)
DVD/VCR
AV1 (TV)
RF-OUT
L
COAXIAL OPTICAL
R
– Connect the DVD/VCR directly to your
TV, instead of eg. a VCR, to avoid distortion
because DVD video discs are copy protect-
ed.
– Do not connect the ANALOG AUDIO
OUT of DVD/VCR to PHONO IN of your
amplifier or receiver.
Note:
– You will still need the video cable or RF
coaxial cable for VCR features.
– If you use the Euro audio/video cable, it
is not necessary to connect the analog
audio cable.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up your DVD/VCR
Simplest connection using only
supplied black RF coaxial cable
1 Disconnect the antenna or cable from your
TV.
2 Connect the antenna or cable to the AERIAL
of your DVD/VCR.
3 Connect black RF coaxial cable to the RF
OUT on the rear panel of the DVD/VCR and
to the ANTENNA IN on the TV.
4 Plug in the power cords of the TV and
DVD/VCR.
Connecting to an Audio System
1 You can also listen to the sound of audio CDs
and DVD video discs by connecting to an
optional stereo system.
2 Connect DVD/VCR ANALOG AUDIO OUT
(Left and Right) to the audio in on the stereo
system.
STEREO
Back of DVD/VCR
Antenna
Indoor/Outdoor
AERIAL
AUDIO (LEFT) IN
AUDIO (RIGHT) IN
(300 ohm)
DVD OUTPUT ONL
Y
ANALOG
S-VIDEO
OUT
DIGITAL
AUDIO OUT
VCR
V2 (DECODER)
DVD/VCR
V1 (TV)
RF-OUT
AUDIO OUT
A
A
L
COAXIAL OPTICAL
R
AERIAL
RF OUT
OR
Cable
(75 ohm)
AERIAL
Black RF
7
5
A
N
coaxial cable
(Supplied)
T
/
C
A
B
LE
DVD OUTPUT ONLY
ANALOG
AUDIO OUT
S-VIDEO
OUT
DIGITAL
AUDIO OUT
VCR
AV2 (DECODER)
DVD/VCR
AV1 (TV)
RF-OUT
L
COAXIAL OPTICAL
R
Antenna In
(on back ofTV)
example only
1
L/MONO
AUDIO
R
VIDEO
in
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up your DVD/VCR
Connecting to Optional
Equipment (for DVD features)
External Input Mode (forVCR
features)
G A digital component with a built-in MPEG 2 or
To receive the signal from an external input
(decoder, video camera, anotherVCR etc.),
connect to the AV2 (DECODER) socket, and
enter “002” with numerical key pads button
to appear “AV2” on the TV screen.
If you use the AV1 (TV) socket, enter “001”
with numerical key pads button to appear
“AV1” on the TV screen.
TM
Dolby Digital decoder allows you to enjoy
the surround sound while producing the effect
of being in a movie theater or a concert hall.
G The player outputs the surround sound signals
from the DIGITAL OUT COAXIAL or OPTI-
CAL connector.
If your receiver has a MPEG 2 or Dolby
Digital™ decoder,
1 Connect the COAXIAL or OPTICAL DIGI-
TAL AUDIO OUT of the DVD/VCR to the
COAXIAL or OPTICAL DIGITAL AUDIO IN
on your receiver.
If you use the front AUDIO/VIDEO input
jacks, enter “003” with numerical key pads
button to appear “AV3” on the TV screen.
Inserting batteries into the
Remote Control
1 Open the battery cover.
2 Insert batteries (AA size) with the correct
polarity as indicated by the + and - symbols
inside the battery compartment.
3 Close the cover.
Note:
– If the audio format of the digital output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
– MP3 Audio is not available on the Digital
Output.
– You will still need the video cable or RF
coaxial cable for VCR features.
AUDIO RECEIVER
CAUTION!
COAXIAL DIGITAL
AUDIO IN
– Remove batteries if they are exhausted
or not to be used for a long time.
– Do not use old and new or different
types of batteries in combination.
– Batteries contain chemical substances,
so they should be disposed off properly
and kept away from children.
OPTICAL DIGITAL
AUDIO IN
AERIAL
DVD OUTPUT ONLY
ANALOG
AUDIO OUT
S-VIDEO
OUT
DIGITAL
AUDIO OUT
VCR
AV2 (DECODER)
DVD/VCR
AV1 (TV)
RF-OUT
L
COAXIAL OPTICAL
Using the Remote Control
R
G Direct the remote control at the remote sen-
sor of the DVD/VCR.
G Do not drop the remote control.
G Do not leave the remote control near
extremely hot or humid place.
G Do not spill water or put anything wet on the
remote control.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up your DVD/VCR
PlayableVideo CassetteTapes
Video Channel Setting
Philips Consume Electronics recommends that
only video cassette tapes that have theVHS
mark and High Quality (HQ) system is
compatible with this DVD/VCR.This
Video channel setting will be necessary, if
your DVD/VCR is connected to the TV via
the coaxial cable.
1 Insert a pre-recorded tape into the
DVD/VCR.The DVD/VCR will turn on and
start playback automatically.
DVD/VCR has an Automatic Head Cleaner.
Recording Prevention
If playback does not start, press the PLAY
button.
B
Video cassette tapes have record tabs to
ensure recordings are not erased accidentally.
1 To prevent recording, break off the tab with a
screw-driver.
2 Select and adjust your TV to channel 36.
G If the playback picture appears on the TV
screen, continue with step 8.
G If channel 36 is employed for broadcasting, or
interference lines appear on the picture, the
RF converter must be set to a different chan-
nel between CH22 and CH69. Continue with
step 3.
1
2
3 Press the MENU button.
4 Press the PLAY B or STOP C button to
select INITIAL.Then, press the FF g but-
ton.
2 To allow recording, cover the hole with
cellophane tape.
5 Press the PLAY B or STOP C button to
select RF OUT.Then, press the FF g but-
ton.
6 Press the PLAY B or STOP C button to
select a channel which is not used for broad-
casted between channel 22 and channel 69 in
your area, then press the FF g button.
Notes:
– Use only tapes with VHS mark.
– Remove any adhesive stick-on notes from
the tape before inserting into the
DVD/VCR.
– Periodic maintenance is required to
maintain your DVD/VCR performance.
– Video heads will require replacement
after a period of time. Only an authorised
service center should perform this service.
RF OUT CH 36
a
will be displayed.
7 Press the MENU button to exit.
Turning on your DVD/VCR
Set the TV channel to the RF OUT CHAN-
NEL which was selected on the DVD/VCR.A
picture from theVCR will appear on the TV
screen. If a picture does not appear, repeat
steps 3 to 7 using a different channel which is
not used for broadcasted.
The following steps should only be performed
if a power failure occurs or the DVD/VCR is
unplugged for more than 30 minutes.
1 Turn on the TV and select the video channel
on the TV.
2 Press theVCR button and then the STAND-
BY-ON button.
8 Press the STOP C button to stop the tape.
Note:
3 Press the PLAY B or STOP C button repeat-
edly to select your desired language.
– You may also access the RF OUT CH
menu by pressing and holding MENU for 3
seconds during power off until the RF
OUT CH menu appears.
LANGUAGE
[
]
ENGLISH
FRANÇAIS
ESPANOL
DEUTSCH
ITALIANO
SVENSKA
a
will be displayed.
NEDERLANDS
4 Press the MENU button.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up your DVD/VCR
Automatic Channel Setup
Manual Channel Preset
You can programme the tuner to scan only
the channels that you can receive in your
area.
1 Press theVCR button, then the MENU but-
ton.
2 Press the PLAY B or STOP C button to
select INITIAL, then press the FF g button.
3 Press the PLAY B or STOP C button to
1 Turn on the TV and select the TV channel to
the video channel on the TV.
2 Press theVCR button, then the MENU but-
ton.
select CH TUNING, then press the FF
button.
g
3 Press the PLAY B or STOP C button to
select INITIAL, then press the FF g button.
4 Press the PLAY B or STOP C button to
4 Press the PLAY B or STOP C button to
select MANUAL, then press the FF g but-
ton.
5 Press the PLAY B or STOP C button to
select POSITION, then press the FF g but-
ton.
G When a weak signal is received in Manual
Tuning mode, you can change the background
to solid blue or the static screen by pressing
the CLEAR button.
6 Press the PLAY B , STOP C button or
numerical key pads button to select your
desired position number, then press the FF
g button.
select CH TUNING, then press the FF
button.
g
5 Press the PLAY B or STOP C button to
select AUTO, then press the FF g button.
CHTUNING
AUTO
MANUAL
MOVE
a
will be displayed.
G The tuner scans and memorizes all the active
channels in your area.After scanning, the
tuner stops on the lowest memorized chan-
nel.
6 Press the P +/– buttons or numerical key
pads button to scan through channels you
have received.
MANUAL
POSITION
CHANNEL
DECODER [OFF]
SKIP
P08
008
a
will be displayed.
[OFF]
G You can select position number 01-99.
G If you want to remove scrambled signals,
press the PLAY B or STOP C button to
select DECODER.Then, press the FF
button to select [ON].
g
7
Press the PLAY B or STOP C button to select
CHANNEL, then press the FF g button.
8 Press the PLAY B or STOP C button.The
DVD/VCR tuner will begin to search up or
down automatically.When a channel is found,
the DVD/VCR will stop searching and the pic-
ture will appear on the TV Screen.
G You can select desired channel number by
using the number buttons.You must refer to
the channel plan and press three digits to
select the channel number. (To select channel
24, first press “0” button then press “2” and
“4”).
G If this is the channel you want, press the FF
g button.
9 Press the MENU button to exit.
Note:
–To confirm that a channel has been
added, press the PROG +/– buttons.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up your DVD/VCR
Adding/Deleting Channels
Channel Reprogramming
1 Press theVCR button, then the MENU but-
ton.
You can replace two channels.
1 Press theVCR button, then the MENU but-
ton.
2 Press the PLAY B or STOP C button to
select INITIAL, then press the FF g button.
3 Press the PLAY B or STOP C button to
2 Press the PLAY B or STOP C button to
select INITIAL, then press the FF g button.
3 Press the PLAY B or STOP C button to
select CH TUNING, then press the FF
button.
g
select CH TUNING, then press the FF
button.
g
4 Press the PLAY B or STOP C button to
select MANUAL, then press the FF g but-
ton.
5 Press the PLAY B or STOP C button to
select POSITION, then press the FF g but-
ton.
4 Press the PLAY B or STOP C button to
select MOVE, then press the FF g button.
5 Press the PLAY B or STOP C button to
select your desired position number, then
press the FF g button.
6 Press the PLAY B , STOP C button or
numerical key pads button to select your
desired position number, then press the FF
g button.
7 Press the PLAY B or STOP C button to
select SKIP, then press the FF g button to
select [ON].
G You cannot select a position number where “-
-” appears next to the number.This is because
SKIP is set to [ON] for this position number.
MOVE
P01: 01
P02: 02
P03: [03]
P04: 04
P05: 05
P06: 06
P07: 07
P08: 08
P09: 09
P10: 10
a
will be displayed.
G To memorize the channel again, press the FF
g button. ON will change to OFF.
Position Number
Channel Number
MANUAL
6 Press the PLAY B or STOP C button until
the channel move to another position num-
ber, then press the FF g button.
POSITION
CHANNEL
DECODER [OFF]
SKIP
P08
008
a
will be displayed.
[ON]
8 Press the MENU button to exit.
MOVE
P01: 01
P02: 02
P03: 03
P04: 04
P05: 05
P06: 06
P07: 07
P08: 08
P09: 09
P10: [10]
a
will be displayed.
7 Press the MENU button.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up your DVD/VCR
Notes:
Setting the Clock
– In the steps 5 and 6, you can go back to
the item you want to correct by pressing
the REW h button.
– Although seconds are not displayed, they
begin counting from 00 when you exit by
pressing the MENU button. Use this fea-
ture to synchronise the clock with the cor-
rect time.
This DVD/VCR incorporates a 24-hour clock.
The clock must be set for the Automatic
Timer Recording function to operate correct-
ly.
If your DVD/VCR is fitted out with PDC and
the PDC signal is available in your area, your
DVD/VCR can get the current time from
your local PDC broadcast. It keeps track of
the time constantly referring to the time
broadcasted by your PDC broadcast. If you
want to use this feature, refer to “AUTO
CLOCK SETTING” in the next section.
– When unplugging the power-cord or if
there is a power failure for more than 30
minutes, you may have to reset the clock.
Auto Clock Setting
1 Follow the steps through 1 to 3 in “MANUAL
CLOCK SETTING”.
2 Press the PLAY B or STOP C button to
select AUTO.
Manual Clock Setting
1 Press theVCR button, then the MENU but-
ton.
2 Press the PLAY B or STOP C button to
select INITIAL, then press the FF g button.
3 Press the PLAY B or STOP C button to
select CLOCK, then press the FF g button.
4 Press the PLAY B or STOP C button to
select MANUAL.
5 Press the PLAY B or STOP C button until
the relevant year appears, then press the FF
g button.
3 Turn off the DVD/VCR once by pressing the
STANDBY-ON button.
G The clock will appear on the TV screen when
you turn on the DVD/VCR again.
Notes:
– Channel Presetting must be set before
the Auto Clock is set.
–The DVD/VCR refers to the channel
which was memorised into position 01.
The PDC channel must therefore be set to
position 01.
–The clock cannot be set automatically if
you are not receiving a channel that car-
ries a time signal in your area. In this case,
set the clock manually.
CLOCK
YEAR
MONTH
DAY
HOUR
MINUTE
2002
01
01 TU
– –
a
will be displayed.
– –
6 Likewise, set the relevant month, day, hour,
and minute.
– Once the auto clock setting is per-
formed, the DVD/VCR will correct the cur-
rent time by receiving PDC broadcasts
whenever you turn off the DVD/VCR.
–The DVD/VCR will correct the current
time automatically at 8:00.
7 Press the MENU button to start the clock.
– Between 23:00~1:00, the AUTO CLOCK
function does not work even if the
DVD/VCR power is turned off.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up your DVD/VCR, VCR Operation
3 If playback does not start automatically, press
Changing the Language
theVCR button, then press the PLAY B but-
ton.
If you want to change the language used on
the TV screen menus, follow the steps below.
1 Press theVCR button, then the MENU but-
ton.
4 Press the STOP C button to stop playback
and press the STOP/EJECT A button on the
DVD/VCR to remove the tape.
2 Press the PLAY B or STOP C button to
select INITIAL, then press the FF g button.
3 Press the PLAY B or STOP C button to
Note:
– When playing a S-VHS format, you can’t
get the high resolution picture and noise
lines may appear on the picture.
select LANGUAGE, then press the FF
button.
g
4 Press the PLAY B or STOP C button to
select your desired language.
5 Press the MENU button.
IF ATAPE IS ALREADY INTHE
DVD/VCR
Using the buttons on the DVD/VCR
Just press the PLAY B button on the
DVD/VCR. Power will automatically turn on
and playback will start. (Direct Button
Operation)
A Status Display
To check the Counter, or Clock & Channel
number, press the DISPLAY button.
Using the buttons on the remote con-
trol
Press the STANDBY-ON button to turn on,
and then press the PLAY B button.
If the display shows an abnormal read-
ing;
When power is off, press the RESET button
on the bottom of the DVD/VCR with the tip
of a pen etc.The DVD/VCR will reset the all
setting forVCR features including timer
recordings, the clock and the language set-
tings. In this case, you need to reset these set-
tings.
Recording aVideo CassetteTape
1 In stop mode, insert a tape with its record
tab intact into the cassette compartment.
a CST. IN light appears on the front of
DVD/VCR.
FRONT SIDE
2 Press the SPEED button until the desired tape
speed appears briefly.
3 Use the P +/– buttons or the numerical key
pad button to select the TV channel to be
recorded.
RESET
button
4 Press the REC button to start recording.
G If a tape without a record tab is in the
DVD/VCR, the DVD/VCR will eject the tape.
5 Press the PAUSE k button once to pause the
recording temporarily.
<BOTTOM VIEW>
Playing aVideo CassetteTape
1 Turn on the TV and set the correct channels
per your DVD/VCR channel.
6 Press the PAUSE k button again or the REC
button to resume recording.
2 With the DVD/VCR power off, insert a tape
in the cassette compartment.
7 To stop recording, press the STOP C button.
Note:
a Playback will start automatically, if the
tape’s record tab has been removed.
– Changing tape speed during recording
will cause distortion on the tape.
G If the DVD/VCR power was already on, press
the SOURCE button to switch toVCR mode.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Operation
Recording One Channel/
Watching Another
1 Press theVCR button, then the REC button to
record the current TV channel.
2 Use the TV remote control to select the chan-
nel you wish to watch.
3 To return to the being recorded channel, use
the TV remote control to select similar chan-
nel set on the DVD/VCR (eg. 36).
3 Press the PLAY B or STOP C button to
select a slot to store the timer recording,
then press the FF g button.
TIMER NUMBER
DATE
START
END
CHANNEL
SPEED
1
--
--
--
--
--
--
/
:
:
--
--
--
VPS/PDC
G Numbers for open slots will flash on the
4 Press the STOP C button to stop the record-
ing.
screen.
4
G For once-only recording : Press the PLAY
B
or STOP C button repeatedly until the rele-
vant month appears.
One-Touch Recording
G This feature allows you to set an immediate
time recording between 30 minutes to eight
hours long.
1 Place the DVD/VCR inVCR mode andVCR
position.
2 Select a recording speed (SP, LP) with the
SPEED button.
3 Put a recordable tape in the cassette compart-
ment.
4 Press theVCR button, then the P +/– or
numerical key pad buttons to select the chan-
nel to be recorded.
5 Press the REC button repeatedly until the
desired recording length appears on the
screen.
G For daily recording :To record a TV pro-
gramme at the same time on the same chan-
nel from Monday through Friday.While the
month digit is flashing, press the PLAY B or
STOP C button to select MO-FR.
G For everyday recording :To record a TV pro-
gramme at the same time on the same chan-
nel every day.While the month digit is flash-
ing, press the PLAY B or STOP C button
repeatedly to select MO-SU.
G For weekly recording :To record a TV pro-
gramme at the same time on the same chan-
nel every week.While the month digit is flash-
ing, press the PLAY B or STOP C button
repeatedly to select W-MO (Example: every
monday).
5 For once-only recording only : Press the PLAY
B or STOP C button repeatedly until your
desired day appears.
a Recording starts immediately.
6 To stop an OTR at any time, press STOP
C
button.
G To cancel the OTR but continue recording,
press the REC button repeatedly until G
mark appears in the TV screen.
7 When the OTR finishes, the DVD/VCR will
switch to DVD mode automatically.
6 Press the PLAY B or STOP C button repeat-
edly until the relevant start hour appears.
Next, enter the minute digit.
7 Press the PLAY B or STOP C button repeat-
edly until the relevant end hour appears.
Next, enter the minute digit.
Timer Recording
8 Press the PLAY B or STOP C button repeat-
edly until the relevant channel number
appears.
G Timer Recording allows you to programme
you DVD/VCR to record TV programs while
you’re away.
9 Press the PLAY B or STOP C button repeat-
edly until your the desired tape speed
appears.
10Press the FF g button Programme 1 is
now completed.
1 With the clock set to ON, press theVCR
button, then the MENU button.
2 Press the PLAY B or STOP C button to
select TIMER, then press the FF g button.
MENU
11Press the MENU button to exit.
12Press the TIMER button to activate the timer.
TIMER
SET UP
INITIAL
a
will be displayed.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Operation
Checking or CancellingTimer
Recording
1 Press the TIMER button.
VPS (Video Programme
System)/ PDC (Programme
Delivery Control)
2 Press theVCR button, then the MENU button.
3 Press the PLAY B or STOP C button to
select TIMER, then press the FF g button.
4 Press the PLAY B or STOP C button to
select programme number, then press the FF
g button.
G The preset timer recording information will
appear on the screen.
5 Press the PLAY B or STOP C button repeat-
edly to review all the programmed timer
recordings.
TheVideo Programme System (VPS) or the
Programme Delivery Control (PDC) is a very
convenient system which assures that the TV
programmes you have programmed for timer
recording, will be recorded exactly from
beginning to end, even if the actual broadcast-
ing time differs from the scheduled time due
to delayed start or extension of the pro-
gramme duration.Also, if a programme is
interrupted and, for example, some special
news is broadcast, the recording will also be
interrupted automatically and resumed when
the programme continues.
6 To cancel the timer recording displayed, press
the REW h button.
Note:
– If power fails for more than 30 minutes,
programmed timer recordings will be lost.
When theVPS/PDC signal drop out because
the broadcast signal is weak, or when a
broadcasting station does not transmit a regu-
larVPS/PDC signal, the timer recording will
be performed in the normal mode (without
VPS/PDC) even if it was programmed for
VPS/PDC.When the starting time of the
VPS/PDC timer recording is from 0:00 to
3:59 on a given day, theVPS/PDC function
operates from 20:00 on the previous day to
4:00 on the following day.When the starting
time of theVPS/PDC timer recording is from
4:00 to 23:59 on the given day, theVPS/PDC
function operates from 0:00 on the day to
4:00 on the following day.This means that if
the relevant programme is broadcasted within
this period, it will be recorded correctly. if in
the timer is not programmed correctly, the
incorrect timer setting stays in effect unless
you cancel it.To cancel the incorrect timer
setting, refer to “Checking or cancelling Timer
Recording’’.
TO STOP ATIMER PROGRAMME
WHICH HAS ALREADY STARTED
Press the STOP/EJECT button on the
DVD/VCR.
Hint forTimer Recording
G If there is a power failure or the DVD/VCR is
unplugged for more than 30 minutes, the clock
setting and all timer settings will be lost.
G If a tape ends during TIMER RECORDING, the
DVD/VCR will stop, eject the tape, and switch
to the DVD mode automatically as the TIMER
light blinks. (If the DVD power is off, the
DVD/VCR will become the STANDBY status).
G If a tape is not in the DVD/VCR or does not
have a record tab, the TIMER light flashes and
timer recording will not operate. Please insert
a recordable tape.
G When timer recordings are set, the TIMER
light will come on.To use the DVD/VCR as
usual until the time for the recording, press
the TIMER SET button so that the TIMER light
disappears. Press the DVD/VCR Button to
chooseVCR or DVD modes, then continue
with the other features as described in this
manual.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Operation
Now, compare the channel numbers you have
written in the GUIDE Channel andVCR
Channel columns.You must set all of these
channel numbers that don't match using the
following procedure before you programme
the automatic timer recording using the
SHOWVIEW system.
SHOWVIEW® Guide Channel Set
First, fill in the boxes below:
Write your local channel numbers in "VCR
Channel" column, corresponding "TV-Station"
and "GUIDE Channel" columns, using see
your TV guide magazine or the TV listings of
your local newspaper.
G This setting only needs to be set once, but
must be done again if you use this DVD/VCR
in another area by moving it.
Guide
Channel
VCR
Channel
TV-Station
1 Press theVCR button, then the MENU but-
ton.
2 Press the PLAY B or STOP C button to
select INITIAL, then press the FF g button.
3 Press the PLAY B or STOP C button to
select GUIDE CHANNEL, then press the FF
g button.
4 Press the PLAY B or STOP C button to
select the relevant mode.Then, press the FF
g button.
G To set the guide channel individually, select
MANUAL.Then, press the FF g button and
continue with step [5].
G To set all of the guide channels to AV1,AV2,
or AV3 select “AV1”,“AV2”, or “AV3”.Then,
press the MENU button to exit.
5 Press the PLAY B or STOP C button to
select the position number, then press the FF
g button.
6 Press NUMBER, the PLAY B or STOP C but-
ton to enter guide channel number, then
press the FF g button.
G Press the REW h button to cancel the
number.
G You can select guide channels 1-255.
G To select channels from 1 to 9, first press “0”
twice then 1 to 9.
G To select channels from 10 to 99, first press
“0” once then press the last two digits. (To
select channel 80, first press “0” then press
“8” and “0”).
To set another, repeat steps [5] to [6].
7 Press the MENU button to exit.
GUIDE CHANNEL
P96
P97
P98
P99
AV1
AV2
:
:
:
:
:
:
99
---
80
---
---
---
Position Number
Gudie Channel Number
20
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Operation
Notes:
Timer Recording using the
SHOWVIEW System
You can programme the timer using the
SHOWVIEW numbers that are printed in TV
guide magazine.You can set seven pro-
grammes to record.
– If the SHOWVIEW number is not available,
it will be cleared automatically when you
press the SHOWVIEW button. Enter the
correct SHOWVIEW number and press the
SHOWVIEW button again.
– If the SHOWVIEW number flashes when
you press the SHOWVIEW button, this
means that the SHOWVIEW number you
entered was incorrect or the timer record-
ing you just programmed and another
timer recording overlap.
1 With the clock set to ON, press theVCR
button, then the SHOWVIEW button.
ShowView
N o . : _ _ _ _ _ _ _ _ _
a
will be displayed.
4 Confirm the channel number, then, press the
FF g button.
G If your local channel information is pro-
grammed in DVD/VCR memory, your local
channel number appears automatically. (Refer
to “SHOWVIEW Guide Channel Set”)
2 Press the numerical key pads button to set
the SHOWVIEW number of the programme you
want to record.
G If your local channel information is not pro-
grammed in DVD/VCR memory,“– –” or an
incorrect channel number may appear. In this
case, press the PLAY B or STOP C button
repeatedly until your desired channel number
appears.Then, press the FF g button.
G When you select the channel number using
the PLAY B or STOP C button, it memorises
in DVD/VCR memory.
ShowView
N o . : 1 2 3 4 5 6 7 8 9
G Press the REW h button to go back one
digit from current digit while you set the
SHOWVIEW number.
3
TIMER NUMBER
DATE
START
END
CHANNEL
SPEED
1
06 / 05 SA
19 : 30
20 : 30
16
SP
OFF
G For once-only recording :
Press the SHOWVIEW button.
G For daily recording :To record a TV pro-
gramme at the same time on the same chan-
nel from Monday through Friday.
Press DAILY/WEEKLY button repeatedly to
select DAILY (MO-FR), then, press the
SHOWVIEW button.
G For everyday recording :To record a TV pro-
gramme at the same time on the same chan-
nel every day.
VPS/PDC
5 Press the PLAY B or STOP C button repeat-
edly until your the desired tape speed
appears.
TIMER NUMBER
DATE
START
END
CHANNEL
SPEED
1
06 / 05 SA
19 : 30
20 : 30
16
SP
OFF
VPS/PDC
Press the DAILY/WEEKLY button repeatedly
to select DAILY (MO-SU), then, press the
SHOWVIEW button.
6 Press the PLAY B or STOP C button repeat-
edly to select “ON” or “OFF”.
G For weekly recording :To record a TV pro-
gramme at the same time on the same chan-
nel every week.
TIMER NUMBER
DATE
START
END
CHANNEL
SPEED
1
06 / 05 SA
19 : 30
20 : 30
16
Press the DAILY/WEEKLY button repeatedly
to select WEEKLY, then, press the
SHOWVIEW button.
SP
VPS/PDC
ON
7 Press the MENU button to exit.
8 Press the TIMER button to activate the timer.
The TIMER light on the display comes on.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Operation
Rerecording (Tape Duplication)
VCR features
G Connect the recording DVD/VCR (this unit),
playing DVD/VCR (anotherVCR) and your TV
as outline in the following diagram.
G Ensure that allVCR setting begins inVCR
mode by pressing the SOURCE
button.
a TheVCR OUTPUT lights up on the DVD/
VCR’s front player.
Back of
Recording DVD/VCR
Auto Return
Back of
AERIAL
Playing DVD/VCR
DVD OUTPUT ONL
Y
LOG
SVIEO
OUT
DIGITAL
AUDIO OUT
VCR
V2 (DECODER)
DVD/VCR
V1 (TV)
1 Press theVCR button, then the MENU button.
2 Press the PLAY B or STOP C button to
select SET UP then press the FF g button.
3 Press the PLAY B or STOP C button to
select to AUTO RETURN, then press the FF
g button to select AUTO.
RF-OUT
AUDIO OUT
A
A
L
COAXIAL OPTICAL
R
¤
DVD OUTPUT ONL
Y
ANALOG
AUDIO OUT
S-VIDEO
OUT
DIGITAL
AUDIO OUT
DVD/VCR
V1 (TV)
A
L
COAXIAL OPTICAL
R
Back of TV
1
L/MONO
A
UDIO
R
VIDEO
in
4 Press the MENU button.
Note:
1 Insert a pre-recorded videocassette into the
playing DVD/VCR.
– If there are any remaining programmes
including Daily, Everyday, & Weekly,AUTO
RETURN will not operate.
2 Insert a blank videocassette into the cassette
compartment of the recording DVD/VCR.
3 Press the SPEED button to select the desired
recording speed (SP/LP).
4 Select “AV2” position on the recording
DVD/VCR.
5 Press the RECORD button on the recording
DVD/VCR.
6 Begin playback of the tape in the playback
DVD/VCR.
Repeat Play
1 Press theVCR button, then the MENU button.
2 Press the PLAY B or STOP C button to
select SET UP then press the FF g button.
3 Press the PLAY B or STOP C button to
select AUTO REPEAT, then press the FF
button to switch between ON or OFF.
g
SET UP
[AUTO]
AUTO RETURN
AUTO REPEAT
Notes:
[
]
]
ON
a
will be displayed.
[
PICTURE NORMAL
– For best results during dubbing, use the
DVD/VCR front panel controls whenever
possible.The remote control might affect
the playback DVD/VCR operation.
– If video or colour fades in and out, you
may be copying a copy guarded video
tape.
– Different VCRs may operate differently
and you can’t record DVD material onto a
video cassette tape using a single unit.
– Unauthorised recording of copyrighted
materials may infringe on the rights of
copyright owners, violate copyright laws
and may not record clearly.
4 Press the DISPLAY/STATUS/EXIT button to
exit.
a When playback is completed, the
DVD/VCR will rewind and start playback
again.
Picture Select
1 Press theVCR button, then the MENU button.
2 Press the PLAY B or STOP C button to
select SET UP, then press the FF g button.
3 Press the PLAY B or STOP C button to
select PICTURE.
4 Press the FF g button to select the desired
mode (NORMAL, SOFT, or SHARP).
SET UP
[AUTO]
AUTO RETURN
AUTO REPEAT
[
]
]
ON
[
PICTURE NORMAL
5 Press the MENU button to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
VCR Operation
Time Search
1 Press theVCR button, then the TIME
SEARCH button.
2 Within 30 seconds, use the PLAY B , STOP
C button or the TIME SEARCH button to
enter the desired length of time to skip for-
ward or backward.
3 Press the FF g button or the REW
h
button within 30 seconds.
G The DVD/VCR will skip over the specified
length of time, then begin playback.
4 Press the STOP C button to cancel the Time
Search.
Note:
–Time Search does not function during
recording.
Index Search
1 Press theVCR button, then the INDEX
SEARCH button.
2 Within 30 seconds, use the PLAY B , STOP
C button or the INDEX SEARCH button to
enter the desired number of programmes to
skip forward or backward.
3 Press the FF g button or the REW
h
button within 30 seconds.
G The DVD/VCR will begin rewinding or fast
forwarding to the beginning of desired pro-
gramme, then begin playback.
4 Press the STOP C button to cancel the Index
Search.
Notes:
– Index Search does not function during
recording.
–The index mark will be made automati-
cally when RECORD is pressed.
Quick Find
1 Press theVCR button, then the QUICK-FIND
button to skip to the beginning of next pro-
gramme.
2 Press the STOP C button to cancel the
Quick Find.
Note:
– Quick Find does not function during
recording.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Operation
Special Effect Playback
Automatic Operation Features
Forward and Reverse Searching
1 During playback, press and release the FF
or REW h button.
Automatic Playback
g
G When a tape is inserted in the DVD/VCR, the
power will turn on automatically.
G If the tape’s record tab is missing, playback will
starts automatically.
a A fast forward or reverse picture search
will begin.
G If a timer recording is set and the tape’s
record tab is intact, the power will not on
automatically.
2 To return to normal playback, press the PLAY
B button.
Super High Speed Searching
1 During playback, press twice the FF g or
REW h button.
Automatic Rewind, Eject
G When a tape is played, fast forward or record
to its end, the DVD/VCR will rewind the tape,
stop, then eject the tape.
a The DVD/VCR will now search in super
high speed.
G If REPEAT PLAY is ON, the DVD/VCR will not
eject the tape automatically and playback will
begin.
2 To return to normal playback, press the PLAY
B button.
Viewing a Still Picture
During playback, press the PAUSE k button.
Tape Eject
1
2
G A tape can be ejected with the DVD/VCR
power on or off with the power connected.
G If a timer recording is set, the tape cannot be
ejected unless the timer recording is can-
celled.
a A still picture will appear on the screen.
To release the still picture and return to
normal playback, press the PLAY B button.
a You can advance the picture by one frame
at a time by pressing the PAUSE k button
during the still mode.
AutomaticTracking Adjustment
G The DVD/VCR adjusts tracking automatically
to obtain best picture quality.
Viewing a Slow Motion Picture
G Manual tracking is also possible to enhance
the picture quality.
1 During playback, press the SLOW button.
a The tape will play in slow motion.
a You can control the speed by pressing the
FF g or REW h button.
ManualTracking
G Press the PROG +/– buttons on the
DVD/VCR to manually adjust the tracking dur-
ing playback and slow motion playback.
G Tracking will switch to Automatic Tracking
Adjustment when the STOP C button is
pressed.
G During a still picture, manual tracking is not
available but you can use the PROG +/– but-
tons on the DVD/VCR to remove vertical jit-
ter in a still picture.
2 To release the slow mode and return to nor-
mal playback, press the PLAY B button.
Note:
– Slow and Still modes will automatically
switch to Stop mode after five minutes to
protect the DVD/VCR and the tape from
damage.
Before
After
Tracking
Adjustment
Tracking
Adjustment
24
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Operation
• During playback of the recorded tape in
Hi-Fi Stereo Sound System
Hi-Fi mode:
G Your DVD/VCR can only receive and record
in Hi-Fi stereo or second audio programs that
are broadcast in stereo or second audio.
G You can only play in stereo or second audio
tapes that were recorded in stereo or second
audio.
Display on
Mode
Stereo
L
AUDIO OUTPUT
Hi Fi L Audio
theTV screen
L
STEREO
R
L
Hi Fi R Audio
Hi Fi L Audio
Hi Fi L Audio
Hi Fi R Audio
Hi Fi R Audio
Normal Audio
Normal Audio
LEFT
Note:
R
L
– Although a programme may be broad-
cast in both stereo and second audio,
you cannot record in both at the same
time.
R
RIGHT
- None -
R
L
Normal
R
SELECTING THE SOUND MODE
You can select each mode by pressing the
AUDIO button on the remote control. Each
mode is indicated on the TV screen as follow-
ing.
• Reception of stereo broadcasts:
Display on
Mode
Stereo
L
AUDIO OUTPUT
L Audio
theTV screen
L
STEREO
LEFT
R
L
R Audio
L Audio
R
L
L Audio
R Audio
R Audio
L+R Audio
L+R Audio
R
RIGHT
- None -
R
L
Monaural
R
• During reception of bilingual broadcasts:
Display on
Mode
MAIN
SUB
AUDIO OUTPUT
theTV screen
L
Main Audio
Main Audio
Sub Audio
Sub Audio
Main Audio
Sub Audio
MAIN
SUB
R
L
R
L
R
MAIN
SUB
MAIN
SUB
Notes:
– If you play non-Hi-Fi tapes, the DVD/VCR
will play automatically in monaural even if
you select any mode.
– If the stereo signal becomes weak, the
broadcast is automatically recorded in
monaural.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Operation
Basic Playback
General Features
G Before begin, turn on the power of the TV,
audio receiver and any other equipment con-
nected to the DVD/VCR.
G Make sure the TV and audio received (option-
al) are set to the correct channel.
1 Press the STANDBY-ON button on the front
panel.
DVDs may contain menus to navigate the disc.
and access special features. Press the
appropriate numerical key or use the L, K, B,
{ keys to highlight your selection in the DVD
menu and press the OK button to confirm.
Note:
– Unless stated, all operations described
are based on remote control use. Some
operations can be carried out using the
menu bar on theTV screen.
a “P-ON” will appear briefly on the display
panel.
2 Press the SOURCE button, then the DVD but-
ton to select DVD mode.
3 Press the OPEN/CLOSE A button on the
front panel to open disc loading tray.
4 Place the chosen disc in the tray, with the label
facing up.
DVD
Disc menus
1 Press the DVD button, then MENU button.
a The DVD’s main menu will appear.
2 If a menu is no available,
symbol may
5 Press the PLAY B button.
appear on the TV screen.
a Playback starts automatically.
3 If disc menu is available on the disc, audio lan-
guage, subtitle options, chapters for the title
and other options will appear for selection.
4 Press the KL{ B buttons to select an item,
and the OK button to confirm selection.
6 Press the STOP C button to stop playback.
DVD
/
Title Menu
1 Press the DVD button, then the TITLE button.
a The title menu will appear.
2 If a title menu is no available,
symbol
Note:
may appear on the TV screen.
– DVDs may have a region code.Your play-
er will not play discs that have a region
code different from the region code of
your player.
3 Press the KL{ B button to select an item,
and the OK button to confirm selection.
a Playback will begin at the selected Title.
DVD CD
Pause
1 During playback, press the DVD button, then
the PAUSE k button.
a Playback will pause and sound will muted.
2 To continue playback, press the PLAY B but-
ton.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Operation
DVD
Step by Step Playback
Zoom DVD
1 During playback, press the DVD button, then
the PAUSE k button.
The Zoom function allows you to enlarge the
video image and to pan through the enlarged
image.
a Playback will pause and sound will be
muted.
1 Press the ZOOM button during playback.
a Playback will continue.
2 The disc goes forward by one frame each time
the PAUSE k button is pressed.
3 To exit step by step playback, press the PLAY
B button.
2 Press the ZOOM button repeatedly to select
the required zoom factor: x2, x4 or OFF.
3 Use the KL{ B keys to move the zoomed
picture across the screen.
4 To exit zoom mode, press the ZOOM button
to “OFF” in the menu bar.
DVD CD
Resume
1 During playback, press the DVD button, then
the STOP C button.
CD
Track
a Resume message will appear on the TV
screen.
There are three ways to begin playback on an
Audio CD at a specific Track.
2 Press the PLAY B button, playback will
resume from the point at which playback was
stopped.
G To cancel resume, press the STOP C button
twice.
Using the Numerical key pads button
1 Press the DVD button, then select the numeri-
cal key pad button to enter the desired Track
number.
a Playback will start from the beginning.
a Playback will start at the selected track.
2 For single digit tracks (1-9), press a single
number (eg. track 3, press 3).
3 To play track 26, press +10, 2, 6 on the numer-
ical key pad button.
Fast Forward / Reverse Search
DVD
1 During playback, press the DVD button.
2 Press the FF g or REW h button repeat-
edly to select the required forward or reverse
speed: x2, x8, x30, x60.
3 To return to normal playback, press the PLAY
B button.
Using the SEARCH MODE/TIME
SEARCH button
1 Press the DVD button, then select the
SEARCH MODE/TIME SEARCH button.
a The track search display appears.
2 Within 30 seconds, select a desired track
number using the numerical key pad button.
a Playback will start at the selected track.
CD
G Use the FF g or REW h button to
select the required forward or reverse at x16
the normal playback speed.
Using the SKIP
j
i button
1 Press the DVD button, then select the SKIP
i button to move to the next track.
2 Press the SKIP i or j button. repeated-
ly to skip subsequent or to return of the cur-
rent tracks.
Slow Motion
DVD
1 During playback, press the DVD button, then
the PAUSE k button.
a Track number will appear briefly on the
DVD/VCR display panel.
2 Press the FF g button.
a Slow motion playback will begin and sound
will be muted.
G When playback is paused, pressing the SKIP
button will start the track playing automatical-
ly.
3 Press the FF g button repeatedly to select
the required speed: 1/16, 1/8, 1/2 of the nor-
mal playback.
Note:
–The SKIP button are not available when
playback is stopped.
4 To return to normal playback, press the PLAY
B button.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Operation
DVD
CD
Title/chapter DVD
Repeat A-B
1 Press the DVD button, then press the
SEARCH MODE/TIME SEARCH button to
display the Title/ Chapter Search on the TV
screen.
1 Press the REPEAT A-B button at your chosen
starting point.
a REPEAT A- appears briefly on the front
display, and the TV screen.
2 To select Title/Chapter, press 3 to move to the
desired title/chapter, then enter the
title/chapter number using numerical key pad
button.
2 Press the REPEAT A-B button again at your
chosen end point.
a REPEAT A-B appears briefly on the front
display, and the repeat sequence begins.
3 To exit the sequence, press the REPEAT A-B
button.
CD
DVD
Time Search
1 During playback, press the DVD button, then
press the SEARCH MODE/TIME SEARCH
button repeatedly to display the Time Search
on the TV screen.
CD
Programme
You may determine the order in which tracks
will play.
2
Within 30 seconds, enter a desired disc time
using the numerical key pad button.
1 In stop mode, press the DVD button, then
press the MODE button.
a Playback will start at the specified time.
PROGRAM
TIME 0:00:00 1/1
--
3 Press the CLEAR button to erase the incor-
rect input.
a
will be displayed.
START:
PLAY
MODE
DELETE
EXIT
:
CLEAR
RETURN
RANDOM
:
:
Repeat
G The REPEAT button are available only during
2 Enter the desired track numbers using the
playback.
numerical key pad button.
DVD
Repeat title/chapter
PROGRAM
TIME 2:07:43 1/1
02 05 07 04 10 14 06 15 21 08
20 28 10 25 35 12 30 42 11 34
G To repeat the current chapter, press the
REPEAT button.
49 16 40 58 18 45 63 01 03
_
START:
PLAY
DELETE
EXIT
:
CLEAR
RETURN
a REPEAT CHAPTER appears on the
front display.
RANDOM
:
MODE
:
3 Press the PLAY B button to play the pro-
G To repeat the current title, press the REPEAT
button a second time.
grammed tracks.
a REPEATTITLE appears on the front
display.
G To exit Repeat mode, press the REPEAT but-
ton a third time.
CD
Random Playback
This shuffles the playing order of tracks
instead of playback in the sequence.
1 In stop mode, press the DVD button, then
press the MODE button twice.
a REPEAT OFF appears on the front
display.
a RANDOM screen appears.
2 Press the PLAY B button to start random
playback.
CD
Repeat track
G To repeat the current track, press the REPEAT
button.
a REPEATTRACK appears on the front
display.
G To repeat the entire disc, press the REPEAT
button a second time.
a REPEAT ALL appears on the front
display.
G To exit Repeat mode, press the REPEAT but-
ton a third time.
a REPEAT OFF appears on the front
display.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Operation
2 Press the K or L button to select a desired
track.
3 Press the PLAY B button to start playing
4 Press the RETURN or SEARCH MODE/TIME
SEARCH button to exit.
MP3
MP3 Playback
When a CD with MP3 files in the DVD/VCR,
the MP3 menu will appear on the TV screen.
1 In stop mode, press the K or L button to
select the desired Album or Track.
G To play a choosen track, press the PLAY B or
the OK button.
MP3
Random Playback
G To play a choosen album, press the K or
L
1 Press the MODE button twice during playback
is stopped.
2 Press the PLAY B button to play the tracks in
random order.
button to select the desired track,then press
the PLAY B or the OK button.
G Choose FIRST PLAY to start playback from
the beginning of the listed tracks.
G Press the TITLE button to return to the first
item.
2 Press the STOP C button to stop playback.
Programmed
1 Press the MODE button during playback is
stopped.
2 Press the PLAY B button to play the tracks in
random order.
3 Press the K or L button to select a track,
then press the OK button.
MP3
Note:
– Folders are known as Albums; files are
known asTracks.
– Up to the eighth hierarchy can be played.
–Total of 255 Albums andTracks can be
recognised.
– You can play MP3 files as follows.
Sampling frequency: 44.1 khz or 48 khz
Fixed bit rate: 112kbps to 320kbps
(Variable bit rate is not playable.)
G Press the CLEAR button to erase the incor-
rect input.
PROGRAM ALBUM01
-
+ALBUM11
+ALBUM12
TRACK01
TRACK11
TRACK12
1/2
TRACK11
1/1
START
RAMDOM: MODE
:
PLAY
DELETE:
EXIT
CLEAR
RETURN
:
MP3
Display Information
4 Press the PLAY B button to start pro-
You can check the MP3 files during playback.
1 Press the DISPLAY button.
grammed playback.
a The playing track will be highlighted.
2 Press the DISPLAY button again to show the
elapsed playing time appear at the top of the
display.
DVD
Audio Language
The DVD/VCR allows you to select a language
during DVD disc (if multi language available)
playback.
T - indicates Track repeat
A - indicates Album (folder) repeat
D - indicates Disc repeat
1 Press the DVD button, then press the AUDIO
button during playback.
2 Press the AUDIO button repeatedly to select
your desired language.
3 Press the DISPLAY button again to exit.
MP3
CD
Track Selection
Stereo Sound Mode
1 Press the SEARCH MODE/TIME SEARCH
button during playback.
G Press the AUDIO button repeatedly during
playback to select between AUDIO STEREO,
AUDIO L-CH or AUDIO R-CH.
a The SEARCH menu will appear.
a The current track will be highlighted.
AUDIO STEREO - both right and left chan-
nels are active (stereo)
ALBUM NAME
AUDIO L-CH - only left channel is active
AUDIO R-CH - only right channel is active
+ALBUM01
TRACK11
TRACK12
TRACK13
TRACK14
1/15
SELECT:
START
:
PLAY
29
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Operation
CD
DVD
Subtitle Language
1 Press the DISPLAY button during playback, the
current Track will be displayed on the TV
screen.
The DVD/VCR allows you to select a language
for subtitle during DVD disc (if available)
playback.
a The elapsed and remaining playing time of
the current total track will be displayed.
2 Press the DISPLAY button again to show cur-
rent Total Track.
a The elapsed and remaining playing time of
the current total track will be displayed.
3 Press the DISPLAY button the third time to
remove the display.
1 Press the DVD button, then press the SUBTI-
TLE button during playback.
2 Press the SUBTITLE button repeatedly to
select your desired subtitle language.
a The available languages appears on the
right of the subtitle display.
3 To turn off subtitles, press the { / B or SUB-
TITLE button repeated until OFF appears.
DVD
DVD
Parental Control
Camera Angle
Password
Some DVD discs contain scenes which have
been shot simultaneously from various angles.
1 Press the DVD button, then press the ANGLE
button during playback.
Parental Control limits the disc viewing that
exceed your settings with a password or
playback will stop.
The “Parental Control” feature allows you to
prevent discs from being played by you chil-
dren or to have certain discs played that alter-
native scenes.
2 Press the ANGLE button repeatedly to select
your desired different angle appears on the
right of the angle display.
1 Press the DVD button, then press the SETUP
button during playback is stopped.
Changing the On-Screen Display
DVD
SET-UP
You can check information about the current
disc by pressing the DISPLAY button on the
remote
1.LANGUAGE
2.DISPLAY
3.AUDIO
4.PARENTAL
a
will be displayed.
SELECT:
EXIT
/
SET
:
OK
control.
:
SETUP
CANCEL
:
RETURN
1 Press the DISPLAY button during playback to
show current Chapter.
a The elapsed and remaining playing time of
the current chapter will be displayed.
2 Press the DISPLAY button again to show cur-
rent Title.
a The elapsed and remaining playing time of
the current title will be displayed.
3 Press the DISPLAY button the third time.
a The BIT RATE, layer number (if available)
and the current repeat setting will be dis-
played.
2 Press the K or L button to select
PARENTAL, then press the OK button.
SET-UP
PARENTAL CONTROLS
PASSWORD
Enter current password.
-
-
-
-
a
will be displayed.
EXIT
:
SETUP
CANCEL
:
RETURN
3 Enter your four-digit password.
G If for the first time, enter any four digits, then
press the OK button.
G To change the password, press the K or
L
4 Press the DISPLAY button the fourth time to
remove the display.
button to select CHANGE. Enter the four-
digit password, then press the OK button.
4 Press the SETUP button to exit.
Note:
– If you forget the password, enter 4737 at
step 3. Password will be cleared and
parental level will be set to ALL.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Operation
Parental Level
DVD CD
Marker Setup Screen
Parental Level allows you to set the rating
level of your DVD discs. Playback will stop if
the disc’s ratings exceed the level you set.
1 Press the DVD button, then press the SETUP
button during playback is stopped.
2 Press the K or L button to select
PARENTAL, then press the OK button.
3 Enter your four-digit password.
4 Press number 1 button to select PARENTAL
LEVEL.
Use markers to memorise your favourite
places on a disc.
1 Press the DVD button, then press the
SEARCH MODE button three times during
playback.
a The display screen and Markers will appear
on the TV screen.
2 Press the { or B button to select 1, 2, 3, 4
or 5 and ensure that “NOT SET” appears in
the display.
SET-UP
3 When reaches the desired point, press the
OK button.
PARENTAL CONTROLS
1.PARENTAL LEVEL
2.CHANGE
ALL
a
will be displayed.
a The Title or Track and elapsed playing time
will appear in the TV screen.
SELECT:
EXIT
/
SET
CANCEL
:
OK
RETURN
:
SETUP
:
4 To return to the Marker later, press the
SEARCH MODE button three times during
playback and the { or B button to choose
the desired marker, then press the OK button.
5 Press the K or L button to select the desired
level.
6 Press the SETUP button to exit.
Note:
– Opening the disc tray or turning off the
power or select AC at step 2 and press the
OK button will erase all Markers.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup
Panel Display:
Audio Setting
– Press the K or L button to select BRIGHT,
DIMMER and AUTO, then press the OK but-
ton.
– This adjust the brightness of the display
panel with the factory default BRIGHT.
– When AUTO is selected, the display dims
only during playback.
Angle Icon:
– Press the OK button repeatedly to turn
Angle icon ON or OFF.
Choose the appropriate Audio settings for
your equipment as it only affect during the
playback of DVD discs of the DVD/VCR.
1 Press the DVD button, then press the SETUP
button during playback is stopped.
2 Press the K or L button to select AUDIO,
then press the OK button.
3 Press the K or L button to choose the below
items and press the OK button repeatedly to
turn the setting ON or OFF.
– The default setting is ON.
Auto Power Off:
Dynamic Range Control (DRC):
– To compress the range of sound volume.
Dolby Digital:
– If you connected the DVD/VCR to a
stereo with Dolby Digital compatible.
MPEG:
– If you connected the DVD/VCR to an
MPEG-compatible stereo.
DOWN SAMPLING:
– Press the OK button repeatedly to turn
Auto Power ON or OFF.
– The default setting is ON and it will turn the
DVD/VCR to off automatically after 35
minutes of no use.
Background:
– Press the OK button repeatedly to select
BLUE or GRAY as the background colour for
the on-screen menus.
– Press OK, then K or L to select AUTO,
48kHz or 96kHz. Press OK again to confirm
selection.
4 Press the SETUP button to exit.
– Select 96kHz if the disc was recorded in
PCM 96kHz, otherwise select 48kHz.
4 Press the SETUP button to exit.
TruSurround Setting
You can enjoy improved stereo sound when
you play disc in Dolby Digital, PCM 48 kHz or
MPEG Audio.
Display Setting
1 Press the MODE button during playback.
2 Press the OK button repeatedly to select ON
or OFF.
3 The factory default setting is OFF. Select ON
only is you connected the DVD/VCR to a
stereo with Dolby Digital or MPEG decoder.
You can change certain aspects of the DVD/
VCR player’s display screens, on-screen
messages and the display panel on the front of
the DVD/VCR.
1 Press the DVD button, then press the SETUP
button during playback is stopped.
2 Press the K or L button to select DISPLAY,
then press the OK button.
3 Press the K or L button to select the below
items.
Note:
– If connection using COAXIAL out, turn
off SRSTruSurround, otherwise there will
be no sound.
TV Aspect:
– Press the K or L button for an item selec-
tion, then press the OK button.
– Select 4:3 LETTER BOX for a black bars
appears on the top and bottom of the screen.
– Select 4:3 PAN & SCAN for a full height
picture with both sides trimmed.
– Select 16:9 WIDE if a wide-screen TV is
connected to the DVD/VCR.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup
Language Setting
Language options are not available is all discs.
1 Press the DVD button, then press the SETUP
button during playback is stopped.
2 Press the K or L button to select LAN-
GUAGE, then the OK button to confirm.
SET-UP
LANGUAGE CONTROLS
1.AUDIO
2.SUBTITLE
3.DISC MENU
4.PLAYER MENU
ORIGINAL
ENGLISH
ORIGINAL
ENGLISH
a
will be displayed.
SELECT:
EXIT
/
SET
CANCEL
:
OK
RETURN
:
SETUP
:
3 Press the K or L button to select AUDIO,
SUBTITLE, DISC MENU or PLAYER MENU,
then the OK button to confirm.
4 Press the K or L button to select a setting,
then press the OK button.
G If OTHER is selected in the AUDIO, SUBTITLE
or DISC MENU screen, press four-digit
number to enter the code for the desired
language.
G You can only select other languages if its
available on the disc.
5 Press the SETUP button to exit.
Language Code Language Code Language Code Language Code Language Code
A-B English[ENG] 5160 Javanese 5669 Oriya 6164 Somali 6561
Abkhazian
4748 Esperanto
5161 Kannada
5166 Kashmiri
F-H Kazakh
5760 Oromo (Afan)6159 Spanish[SPA] 5165
Afar
4747 Estonian
5765 Panjabi
5757 Pashto
6247 Sundanese
6265 Swahili
6567
6569
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
4752
6563 Faroese
5261 Kinyarwanda 6469 Persian
5256 Kirghiz 5771 Polish
6460 Portugese[POR]
5471 French[FRE] 5264 Korean[KOR] 5761 6266 Tajik
5247 Swedish[SWE] 6568
6258
4759 Fiji
T
4764 Finnish[FIN] 5255 Kirundi
Tagalog
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
4765 Frisian
4771 Gaelic (Scots) 5350
5358 Laothian
5747 Latin
5271 Kurdish
5767 Pushto
Quechua
6265 Tamil
6367 Tatar
Telugu
6459 Thai
Tibetan
6461 Tigrinya
L-N
Azerbaijani 4772 Galician
Bangla
5861 Rhaeto-Romance
4860 Georgian
5847
Bashkir
Basque
Bengali
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
4847 German[GER] 5051 Latvian
5167 Greek[GRE] 5158 Lettish
4860 Greenlandic 5758 Lingala
5868 Romanian[RUM]
5868
5860 Russian[RUS] 6467 Tonga
5866 Tsonga
5367 Macedonian 5957
5072 Guarani
4854 Gujarati
4855 Hausa
4864 Hebrew
4853 Hindi
5360 Lithuanian
S
Turkish[TUR] 6664
6559 Turkmen
5447 Malagasy
5569 Malay
5455 Malayalam
Maltese
5467 Maori
Marathi
5953 Samoan
6657
6669
5965 Sangho
5958 Sanskrit
5966 Serbian
6553 Twi
6547
U-Z
5971 Hungarian[HUN]
6564 Ukrainian
Urdu
6554 Uzbek
6757
6764
6772
Byelorussian 4851
5955 Serbo-Croatian
5964
C-E
I-K
Cambodian 5759 Icelandic[ICE] 5565 Moldavian
5961 Sesotho
5960 Setswana
6047 Shona
6051 Sindhi
6566 Vietnamese 6855
Catalan
4947 Indonesian
5560 Mongolian
5547 Nauru
5551 Nepali
6660 Volapuk
6560 Welsh
6550 Wolof
6555 Xhosa
6565 Yiddish
6557 Yoruba
6558 Zulu
6861
4971
6961
7054
5655
7161
7267
Chinese[CHI] 7254 Interlingua
Corsican
Croatian
Czech
4961 Interlingue
5464 Inupiak
4965 Irish[IRI]
5557 Norwegian[NOR]
Singhalese
5347
5566
6061 Siswat
Danish[DAN] 5047 Italian[ITA]
Dutch[DUT] 6058 Japanese[JPN] 5647 Occitan
O-R
Slovak
6149 Slovenian
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
PLAYBACK SYSTEM
AUDIO PERFORMANCE
DVDVideo
Audio CD
DVD+RW
CD-R/RW
DA Converter
DVD
24 bits
fs 96 kHz
fs 48 kHz
4 Hz - 44 kHz
4 Hz - 22 kHz
CD
fs 44.1 kHz 20 Hz - 20 kHz
Signal-Noise (1kHz)
Dynamic Range (1kHz)
Distortion and Noise (1kHz)
110 dB
94 dB
0.007 %
TV STANDARD (PAL/50Hz) (NTSC/60Hz)
Number of lines
Playback
625
525
Multistandard (PAL/NTSC)
CONNECTIONS
VIDEO PERFORMANCE
SCART
2x Euroconnector
Mini DIN, 4 pins
S-Video Output
Audio L+R output
Digital Output
Video output
1Vpp into 75 ohm
2x Cinch (white/red)
1 coaxial, 1 optical
IEC958 for CDDA / LPCM
IEC1937 for MPEG1/2, Dolby
Digital
RGB (SCART) output
Video Shift
0.7Vpp into 75 ohm
Left/Right
VIDEO CASSETTE RECORDER
Video heads
Antenna
VHF output
Four heads - Hi-Fi
VHF/UHF - 75 ohm
75 ohm unbalanced
CABINET
Dimensions (w x h x d)
Weight
435 x 99 x 266 mm
Approximately 4.0 Kg
AUDIO FORMAT
Digital
MPEG
Compressed
Digital
POWER SUPPLY (UNIVERSAL)
Power inlet
Power usage
230V ~, 50 Hz
Approx. 30 W
(standby : 7.8 W)
< 8.5 W
Dolby Digital
PCM
16, 20, 24 bits
fs, 44.1, 48, 96 kHz
Analogue Stereo Sound
Dolby Surround-compatible downmix from Dolby Digital
multi-channel sound
Power usage standby
Specifications subject to change without prior notice
3D Sound for virtual 5.1 channel sound on 2 speakers
Maintenance
Cleaning the Cabinet
G Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or
abrasives.
Cleaning the disc lens
G After prolonged use, dirt or dust may
accumulate at the disc lens.To ensure good
playback quality, clean the disc lens with Philips
CD Lens Cleaner or any commercially
available cleaner. Follow the instructions
supplied with the cleaner.
Cleaning Discs
G
When a disc becomes dirty, clean it with a
cleaning cloth.Wipe the disc from the centre
out. Do not wipe in a circular motion.
G Do not use solvents such as benzine, thinner,
commercially available cleaners, or antistatic
spray intended for analogue records.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair.
Problem
Solution
No power
– Check if the AC power cord is properly
connected.
No picture
– Check if the TV is switched on.
– Check the video connection.
Distorted picture
– Sometimes a small amount of picture distortion
may appear.This is not a malfunction.
Completely distorted picture or
black/white picture with DVD
– Connect DVD/VCR directly to the TV.
– Make sure the disc is compatible with the
DVD/VCR.
No sound or distorted sound
No audio at digital output
– Adjust the volume.
– Check that the speakers are connected correctly.
– Check the digital connections.
– Check if the audio format of the selected audio
language matches your receiver capabilities.
No DTS audio at analog output
No sound and picture
– Use a DIGITAL AUDIO OUT jack when outputting
the DTS audio.
– Check that the SCART cable is connected to the
correct device (See Connecting to a TV)
Picture freezes momentarily during
playback
– Check the disc for fingerprints/scratches and clean
with a soft cloth wiping from centre edge.
– This may happen when you use the disc recorded in
the non-seamless manner.This is not a malfunction.
Disc can’t be played
– Ensure the disc label is facing up.
– Check if the disc is defective by trying another disc.
– Reset the unit by switching the player off, then on
again.
No return to start-up screen when
disc is removed
The player does not respond to the
remote control
– Aim the remote control directly at the sensor on
the front of the player.
– Reduce the distance to the player.
– Replace the batteries in the remote control.
– Re-insert the batteries with their polarities (+/–
signs) as indicated.
Buttons do not work or player stops
responding
– To completely reset the player, unplug the AC cord
from the AC outlet for 5-10 seconds.
Player does not respond to some
– Operations may not be permitted by the disc.
operating commands during playback.
Refer to the instructions of the disc.
DVD/VCR cannot read CDs/DVDs
– Use a commonly available cleaning CD/DVD to
clean the lens before sending the DVD/VCR for
repair.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Solution
The DVD/VCR switches from DVD mode
toVCR mode after 35 minutes
– Playback will stop for more than 35 minutes and no
button is pressed.
TheVCR do not record aTV
program
– Make sure the tape has a record tab.
– Make sure the DVD/VCR is inVCR position.
– Check the TV and the DVD/VCR channel are
similar.
The DVD/VCR do not perform a
timer
– Make sure the recording start and stop times are
set correctly.
– Make sure the tape has a record tab.
– Make sure the clock is set.
– The DVD/VCR may not perform or continue a
timer recording if the power fails for more than 30
minutes.
The motor (cylinder) rotates even
when tape playback is stopped
– To enable quick play mechanism, the cylinder will
rotate for about five minutes.This is normal.
You cannot insert a tape
– Insert a tape, window side up with the record tab
facing you.
– Gently push on the center of the tape when putting
into the DVD/VCR.
You cannot remove a tape
– Make sure the power plug is completely connected
to a power outlet.
DVD/VCR ejects the tape when you
press the REC orTIMER button for a
timer recording.
– Make sure the tape has a record tab.
If you are unable to remedy a problem by following these hints, consult your dealer or service
centre (HOTLINE).
36
Download from Www.Somanuals.com. All Manuals Search And Download.
PHILIPS NORGE AS
Sandstuveien 70,
PO Box 1, Manglerud
N-0612 Oslo
PHILIPS
Österreichische Philips Industrie
GmbH
Triesterstrasse 64
1101 Wien
PHILIPS PORTUGUESA,
S.A.
Consumer Information Center
Rua Dr.António Loureiro Borge,
nr.5
NORWAY
Phone: 2274 8250
AUSTRIA
Tel: 0810 001 203
Arquiparque, Miraflores
P-2795 L-A-VEHLA
PORTUGAL
OY PHILIPS AB
Sinikalliontie 3,
02630 Espo
Helsinki
FINLAND
PHILIPS INFO CENTER
Alexanderstrasse 1
20099 Hamburg
Phone: 021-4163063
PHILIPS CE,The Philips
Centre,
GERMANY
puh. 09 615 80 250
Tel: 0180-53 56 767
420 - 430 London Road,
Croydon, Surrey
PHILIPS KUNDTJÄNST
Kollbygatan 7,
Akalla,
SERVICE CONSOMMA-
TEURS PHILIPS
BP 0101
CR9 3QR
UNITED KINGDOM
Phone: 0208-665-6350
16485 Stockholm
SWEDEN
Phone: 08-598 52 250
75622 Paris Cédex 13
FRANCE
Phone: 0825-889 789
CONSUMER SERVICES
Prags Boulevard 80. PO Box
1919,
PHILIPS POLSKA
AL. Jerozolimskie 195B
02-222 Warszawa
POLSKA
PHILIPS ELECTRONICS
IRELAND LIMITED
Consumer Information Center
Newstead, Clonskeagh
DUBLIN 14
DK-2300 Copenhagen S
DANMARK
TIf: 32 88 32 00
Tel.: (022)-571-0-571
PHILIPS REPRESENTA-
TION OFFICE
Ul. Usacheva 35a
119048 MOSCOW
RUSSIA
Phone: 01-7640292
PHILIPS SERVICE
V Mezihori 2
180 00 Prage
CZECH REPUBLIC
Phone: (02)-3309 9240
PHILIPS CONSUMER
ELECTRONICS
Servizio Consumatori
Via Casati 23
Phone: 095-937 9300
20052 Monza - Milano
ITALY
Phone: 800 820026
PHILIPS INFO CENTER
Fegistrasse 5
8957 Spreitenbach
SUISSE
PHILIPS Iberia, S.A.
C/MartinezVillergas, 49
28027 MADRID
SPAIN
Phone: 902-11 33 84
PHILIPS MÁRKASZERVIZ
Kinizsi U 30 - 36
Tel.: 0844-800 544
Budapest 1092
HUNGARY
PHILIPS CUSTOMER CARE
CENTER
Phone: (01)-2164428
Twee Stationsstraat 80/
80 Rue des Deux Gares
1070 BURSSEL/BRUXELLES
BELGIUM (for BENELUX)
Tel: 070-222303
Meet Philips at the Internet
The products and services described herein are not necessarily
available in all countries
Due to continuous product improvements this document is
subject to change without notice.
Printed in China
0VMN03258A / H9330ED****
Download from Www.Somanuals.com. All Manuals Search And Download.
|