E9015ED_EN.qx3 03.7.29 6:32 PM Page 1
Digital Video Disc Player
Video Cassette Recorder
FM/MW RadioTuner
MX5100VR
R
Download from Www.Somanuals.com. All Manuals Search And Download.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 3
Contents
General Information
Programming a Recording (TIMER)
Environmental Information. . . . . . . . . . . . . . . . . . . . . 2
Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Symbols Used in this Manual . . . . . . . . . . . . . . . . . . . 2
General information . . . . . . . . . . . . . . . . . . . . . . . . . 13
Programming a recording
(with the 'SHOWVIEW® system') . . . . . . . . . . . . . . . . 13
Programming a recording
(without the SHOWVIEW system). . . . . . . . . . . . . . . . 14
OTR (OneTouch Recording). . . . . . . . . . . . . . . . . . . 14
How to check, or delete
Functional Overview
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Display Message. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
a programmed recording (TIMER) . . . . . . . . . . . . . . 14
How to change
a programmed recording (TIMER) . . . . . . . . . . . . . . 14
Hints forTimer Recording . . . . . . . . . . . . . . . . . . . . 14
Setting Up your System
Other Functions
Basic Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Connecting to aTV . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Connecting to Optional Equipment
Switching the status display off or on . . . . . . . . . . . . 15
Blue Background on or off . . . . . . . . . . . . . . . . . . . . 15
Clock Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Selecting the sound channel . . . . . . . . . . . . . . . . . . . 15
Digital Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Surround Sound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
(for DVD features). . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Antenna Connections . . . . . . . . . . . . . . . . . . . . . . . . . 7
Connecting the speaker wires to the speaker jacks . . 7
Setting up Surround Sound. . . . . . . . . . . . . . . . . . . . . 8
External Input Mode (forVCR features). . . . . . . . . . . 8
Inserting batteries into the Remote Control . . . . . . . 8
Using the Remote Control . . . . . . . . . . . . . . . . . . . . . 8
PlayableVideo CassetteTapes. . . . . . . . . . . . . . . . . . . 8
Turning on your System . . . . . . . . . . . . . . . . . . . . . . . 8
Video Channel Setting . . . . . . . . . . . . . . . . . . . . . . . . 9
Automatic Channel Setup. . . . . . . . . . . . . . . . . . . . . . 9
Manual Channel Preset . . . . . . . . . . . . . . . . . . . . . . . . 9
FollowTV (AutomaticTV channels sorting). . . . . . . . 9
Sorting and clearingTV channels manually . . . . . . . 10
Setting the language (forVCR features) . . . . . . . . . . 10
Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Setting the RF out channel (forVCR features). . . . . 10
Decoder allocation (forVCR features) . . . . . . . . . . . 10
Playing a Disc
Basic Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
General Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Disc Menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Calling Up a Menu During Playback . . . . . . . . . . . . . 16
Step by Step Playback . . . . . . . . . . . . . . . . . . . . . . . . 16
Resume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Fast Forward / Reverse Search . . . . . . . . . . . . . . . . . 16
Slow Forward / Slow Reverse . . . . . . . . . . . . . . . . . . 16
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Title / Chapter Search. . . . . . . . . . . . . . . . . . . . . . . . 17
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
MP3/JPEG Playback . . . . . . . . . . . . . . . . . . . . . . . . . . 18
On-Screen Information . . . . . . . . . . . . . . . . . . . . . . . 18
Track Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Audio Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Stereo Sound Mode. . . . . . . . . . . . . . . . . . . . . . . . . . 18
Subtitle Language . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Camera Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Changing the On-Screen Display . . . . . . . . . . . . . . . 19
Parental Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Marker Setup Screen. . . . . . . . . . . . . . . . . . . . . . . . . 19
VCR Playback
Playing cassettes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Playing back NTSC cassettes . . . . . . . . . . . . . . . . . . 11
Displaying current tape position . . . . . . . . . . . . . . . . 11
Searching for a tape position with picture
(scanning). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Still picture / slow motion . . . . . . . . . . . . . . . . . . . . . 11
Searching for tape position without picture
(forward wind and rewind) . . . . . . . . . . . . . . . . . . . . 11
Index search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
ManualTracking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
VCR Manual Recording
General information . . . . . . . . . . . . . . . . . . . . . . . . . 12
Recording without automatic switch-off. . . . . . . . . . 12
Linking up recordings (assemble cut) . . . . . . . . . . . . 12
Selecting the recording speed (SP or LP). . . . . . . . . 12
Automatic controlled recording from a satellite
receiver (RECORD LINK) . . . . . . . . . . . . . . . . . . . . 12
'Direct Record'. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Switching 'Direct Record' on or off. . . . . . . . . . . . . . 12
Direct dubbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Recording (From DVDToVCR). . . . . . . . . . . . . . . . . 13
DVD Setup
Audio Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
DelayTime. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Speaker Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Language Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Display Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
FM/MW Radio
Selecting Radio Station . . . . . . . . . . . . . . . . . . . . . . . 22
Preset Radio Stations . . . . . . . . . . . . . . . . . . . . . . . . 22
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
R
SHOWVIEW is a registered trademark of Gemstar Development
Corporation.
The SHOWVIEW system is manufactured under licence from
Gemstar Development Corporation.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 4
Functional Overview
20.
(VCR)
Front Panel
Appears when a videotape is loaded.
1
2
3
4
5
21. REPEAT (DVD)
Stays on when the repeat function is on.
STOP/EJECT
22. B (DVD,VCR)
OPEN
CLOSE
JAZZ
POP
CLASSIC
Stays on when the inserted disc or cassette is being played
back.
OPTIMAL
STANDBY-ON
DIRECT
SOURCE
DVD
VCR TUNER DUBBING
PLAY
STOP
TIMER
REC
RECORD
PLAY
HEADPHONE
VIDEO
AUDIO
VOL
IR
SURR
23. k (DVD,VCR)
Lights up when the inserted disc comes to a pause. (DVD)
Lights up when the playback is in a still or in a slow mode.
(VCR)
18 17 161514
1312 11 10
9
8
7
19
6
24. A-B (DVD)
Stays on when the A-B repeat function is on.
25. FM (TUNER)
Indicates an FM station
26. MW (TUNER)
Indicates an MW station
202122 2324 25 26 27 28 29 30 31 32 33 34 3536
27.
(TUNER)
Indicates a stereo broadcast
1. DiscTray (DVD)
insert a disc here
2. OPEN/CLOSE A button (DVD)
28. TITLE (DVD)
Stays on when repeat title function is on.
to open/close the disc tray
29. Digital Display (DVD,VCR,TUNER)
Displays how long a current title or track has been played
back.When a chapter or track has switched, the number of a
new title, chapter or track is displayed. (DVD)
Works as a clock, or a tape counter. Also displays a channel
number, and remaining time for OTR. (VCR)
Displays a current radio frequency (station number).
(TUNER)
30. CHP. (DVD)
Stays on when repeat chapter function is on.
31. TRK (DVD)
Stays on when repeat track function is on.
32. CD
3. Cassette Compartment (VCR)
insert a tape here
4. STOP/EJECT C A button (VCR)
when playback is stopped, press to eject the tape
5. Sound lights
Each indicator lights according to the sound effect you select
by pressing the SOUND button on the remote
6. VOLUME dial
turn clockwise to increase the volume; turn counter-clock-
wise to decrease the volume
7. SURR light
light appears when Surround Sound is On
8. AUDIO andVIDEO in jacks
connect to AUDIO andVIDEO OUT of an audio source
9. HEADPHONE jack
connect headphones (not supplied) here
10. PLAY B button (VCR)
Lights up when a CD is inserted on the tray.
VCD
Lights up when aVCD is inserted on the tray.
33. MHz
Indicates an FM station.
KHz
Indicates an MW station.
to play a tape
11. RECORD button and light (VCR)
Press once to start recording, repeatedly to start an One
Touch Recording
light appears during recording, it flashes when a recording is
paused
12. TIMER REC light (VCR)
34. dts
Indicates DTS is available.
35. DDPL
Indicates Dolby ProLogic is available.
36. DDD
light appears when the System is in standby mode for a timer
recording (also light appears during timer recording)
Indicates Dolby Digital is available.
13. IR (Infrared) Remote Sensor (DVD,VCR,TUNER)
receive signals from remote control
14. STOP C button (DVD)
Display Message
Appears after the disc tray closes if the tray is empty, if
there is an error reading the disc, or if an unacceptable
disc is installed.
to stop playback
15. PLAY B button (DVD)
to start, pause or resume disc playback
Tray is opening or is open.
16. DIRECT DUBBING button (VCR)
to play DVD disc and record its’ content to video cassette
tape at the same time
Tray is closing. This also may appear as the Player tries
to load a Disc.
17. SOURCE button and lights (DVD,VCR,TUNER)
to select DVD,VCR and TUNER mode
Disc is loading.
DVD light appears when the System in DVD mode
VCR light appears when the System inVCR mode
TUNER light appears when the System in TUNER mode
Lights up when a playback control is activated.
18. STANDBY-ONy button and light (DVD,VCR,
TUNER)
to switch the player to ON or OFF
light appears when the System turns on.
19. DVD
Lights up when a DVD is inserted on the tray.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 5
Functional Overview
1. TIMER SET
Rear Panel
to put the System into standby mode for a timer recording
2
3
1
2. SYSTEM MENU
to access or remove the DVD setup menu (DVD)
AV2
(DECODER)
PROG
FL
FR
C
VCR
DVD/VCR
MW
to preset radio stations in Tuner mode (TUNER)
AV1(TV)
SL
SR
W
RF OUT
AERIAL
3. AUDIO/BAND
TV ANTENNA
FM
(75Ω)
to choose audio languages or sound modes (DVD)
to choose sound modes (VCR)
DIGITAL
AUDIO OUT
COAXIAL
S-VIDEO
OUT
SPEAKER (4Ω)
to choose FM or MW in Tuner mode (TUNER)
4 5 6 7
1. AV1 (TV) jack
connect SCART cable to a TV
2. AV2 (DECODER) jack (VCR only)
8
9
10
11
4. REC
I
to record the TV channel selected at this moment or press
repeatedly to start a One Touch Recording (VCR)
5. SKIP/P– j / SKIP/P+
i
to skip chapter/tracks (DVD)
to change TV channels (VCR)
connect SCART cable from another DVD/VCR, camcoder or
an audio/video source
press and hold to search radio station
or press to increase or decrease the frequency by one-tenth
(TUNER)
3. MW antenna jack
connect the supplied MW antenna to the MW jack
4. S-Video Out jack (DVD only)
connect to a TV with S-Video inputs
5. RF OUT jack
use the supplied RF coaxial cable to connect to the ANTEN-
NA IN on your TV, cable box or Direct Broadcast System
6. AERIAL jack
6. TITLE
to display title menu of a disc (DVD)
7. MODE/SYSTEM
to set up programmed or random playback (DVD,Audio CD)
not use (VCR)
8. DVD
press to put the System in DVD mode and before using the
remote control for DVD features
9. DISC/VCR MENU
connect to an antenna or cable
7. COAXIAL (Digital audio out) jack (DVD only)
connect to AUDIO inputs of a digital (coaxial) audio equip-
ment
8. FM antenna jack
connect the supplied FM antenna to the FM jack
9. Fan
to display the menu of the DVD disc or to accessVCR menu
10. STOP
C
to stop a DVD disc playback (DVD)
to stop playback, recording (VCR)
to erase a preset (TUNER)
10. SPEAKER jacks
connect the supplied speakers using the supplied speaker
wires.
11. MAINS (AC Power Cord)
11. REW
h
to view DVD picture in fast reverse motion (DVD)
to rewind the tape (VCR)
12. 0-9 numerical key pads/+10
select numbered items in a menu
connect to a standard AC outlet
use +10 button to enter number 10 and above (DVD)
to select TV channels / to enter the SHOWVIEW number
(VCR)
Remote Control
to choose a preset radio station (TUNER)
13. SURROUND
34
STANDBY-ON
TIMER SET
33
1
to turn Surround Sound on or off
SYSTEM
MENU
AUDIO/
BAND
SUBTITLE
ANGLE
2
3
32
31
14. SOUND
to choose a Digital Sound effect
15. VOLUME
PROG
REC DISPLAY/STATUS/EXIT ZOOM
4
30
to adjust the volume
16. REPEAT A-B
repeat a specific segment (DVD)
17. REPEAT
SKIP/
SKIP/
CLEAR
5
P
-
P
+
29
28
TITLE
MODE/SYSTEM
RETURN
6
7
8
TUNER
DVD
VCR
OK
27
26
25
repeat chapter, track, title, disc (DVD)
DISC/VCR
18. SEARCH/INDEX
3
MENU
9
to access or remove search display (DVD)
to fast forward or rewind the tape at index number (VCR)
19. SV/V+
24
STOP
PLAY
to programme timer recording with the SHOWVIEW system
(VCR)
20. SLOW
to view tape playback in slow motion (VCR)
10
11
23
22
REW
FF
21
PAUSE
SLOW
21. FF
g
1
4
2
5
8
0
3
6
20
19
to view DVD picture in fast forward motion (DVD)
to fast forward the tape (VCR)
22. PAUSE
pause playback temporarily / frame-by-frame playback (DVD)
pause playback and recording temporarily (VCR)
23. PLAY
SV / V+
k
12
SEARCH/INDEX
7
9
18
17
REPEAT
REPEAT
A-B
B
+10
16
to start a DVD disc playback (DVD)
to start a tape playback(VCR)
SURROUND SOUND
VOLUME
15
13
14
5
Download from Www.Somanuals.com. All Manuals Search And Download.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 6
Functional Overview
Setting Up your System
24.
{
B
K
L
Basic Connections
• Please refer to the instruction books of your TV,VCR, Stereo
System or other devices as necessary to make the best con-
nections.
• Make one of the following connections, depending on the
capabilities of your existing equipment.
The following guidelines are options for the best picture and
sound quality available on your System.
(left/right/up/down) select an item in the menu
B to choose a preset radio station (TUNER)
25. OK
acknowledge menu selection (DVD)
26. TUNER
press to put the System in TUNER mode and before using
the remote control for TUNER features
27. VCR
{
Picture
press to put the System inVCR mode and before using the
remote control forVCR features
1
2
3
4
Use SCART RGB Output (DVD/VCR(AV1 TV)) for best picture
quality (for DVD features).
Use S-VIDEO Output for the better picture quality (for DVD
features only).
Use SCART Composite Output for good picture quality (for
DVD andVCR features).
If your TV only has a RF-style (Antenna IN or 75 ohm) input,
use the RF OUT for connection and set your TV to channel 22
~ 69 with the same channel for the System is set (for DVD and
VCR features).
28. RETURN
to return previous or remove setup menu (DVD)
29. CLEAR
to reset the setting (DVD)
to reset the counter (VCR)
to delete last entry/Clear programmed recording (TIMER)
(VCR)
30. ZOOM
enlarge DVD video image (DVD)
31. SUBTITLE
subtitle language selector (DVD)
32. ANGLE
select DVD camera angle (DVD)
33. STANDBY-ON
Sound
1
2
Digital audio connections provide the clearest sound. Connect
the System DIGITAL AUDIO OUT (COAXIAL) to your amplifier
or receiver (for DVD features only).
Use SCART Output (DVD/VCR(AV1 TV)) for better sound
quality (for DVD andVCR features).
y
Warning!
switch the System ON or OFF
– Never make or change connections with the power
switched on.
– Connect the System directly to yourTV, instead of eg. a
VCR, to avoid distortion because DVD video discs are
copy protected.
– If you use the Euro audio/video cable, it is not necessary
to use other audio cables.
34. DISPLAY/STATUS/EXIT
to access or remove the display screen during DVD or Audio
CD playback (DVD)
to access or removeVCR’s on-screen status display/ to
removeVCR’s menu (VCR)
Connecting to aTV.
1
2
3
Disconnect the antenna or cable from your TV.
Connect the antenna or cable to the AERIAL of your System.
Connect black RF coaxial cable to the RF OUT on the rear
panel of the System and to the ANTENNA IN on the TV.
Connect the AV1 (TV) jack on the System to the correspond-
ing connector on the TV.
4
Note:
– Ensure that the “TV” indication on SCART cable is con-
nected to theTV set and “DVD” indication on SCART
cable is connected to the System.
5
Plug in the power cords of the TV and the System.
Antenna In
Back of DVD/VCR/TUNER
(on back ofTV)
example only
Antenna
Indoor/Outdoor
(300 ohm)
AV2
(DECODER)
FL
VCR
DVD/VCR
MW
FR
C
AV1(TV)
SL
SR
W
RF UT
AERIAL
TV ANTENNA
FM
(75Ω)
DIGITAL
AUDIO OUT
COAXIAL
S-VIO
OUT
SPEAKER (4Ω)
1
L/MONO
AUDIO
R
VIDEO
in
RF OUT
AERIAL
OR
75
ANT
CABLE
Cable
(75 ohm)
Black RF
coaxial cable
(Supplied)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 7
Setting Up your System
If your TV is not equipped with a SCART input, you can select
the following connection:
If yourTV has a S-Video input connector,
Connect the antenna or cable to the AERIAL of your System.
Connect the S-Video out on the System to the S-Video in on
the TV.
Connect the COAXIAL (Digital audio out) on the System to
the Coaxial jack on the TV.
Antenna Connections
MW Antenna
1
2
Fix the antenna holder as shown.
1
2
3
Note:
– You will still need the SCART cable or RF coaxial cable
for VCR features.
Connect the supplied MW antenna to the MW jack, then posi-
tion it to receive the clearest sound.
AV2
(DECODER)
FL
VCR
DVD/VCR
MW
FR
C
AV1(TV)
SL
SR
W
RF OUT
AERIAL
TV ANTENNA
FM
(75Ω)
DIGITAL
AUDIO OUT
COAXIAL
S-VIDEO
OUT
SPEAKER (4Ω)
AV2
(DECODER)
FL
FM Antenna
Connect the supplied FM antenna to the FM jack. Extend the
FM antenna wire and fix its end to the wall.
VCR
MW
FR
C
DVD/VCR
AV1(TV)
SL
SR
W
RF OUT
AERIAL
1
TV ANTENNA
FM
(75Ω)
DIGITAL
UDIO OUT
COAXIAL
S-VIDEO
OUT
SPEAKER (4Ω)
AV2
(DECODER)
FL
VCR
DVD/VCR
MW
FR
C
Connecting to Optional Equipment
(for DVD features)
AV1(TV)
SL
SR
W
RF OUT
AERIAL
TV ANTENNA
FM
(75Ω)
DIGITAL
AUDIO OUT
COAXIAL
S-VIDEO
OUT
SPEAKER (4Ω)
• A digital component with a built-in MPEG 2 or Dolby
TM
Digital decoder allows you to enjoy the surround sound
while producing the effect of being in a movie theater or a
concert hall.
•The player outputs the surround sound signals from the DIG-
ITAL OUT COAXIAL connector.
Notes:
– Do not place the MW antenna on the System. Keep it as
possible from the System and the speaker wires. Keep it
away from the AC power cords of the System and other
equipment.
– For better FM reception, connect an outdoor FM anten-
na (not supplied) to the ANTENNA 75 ohm jack.
If your receiver has a MPEG 2 or Dolby Digital™ decoder,
Connect the COAXIAL DIGITAL AUDIO OUT of the System
to the COAXIAL DIGITAL AUDIO IN on your receiver.
1
Notes:
– If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will pro-
duce a strong, distorted sound or no sound at all.
– MP3 Audio is not available on the Digital Output.
– You will still need the video cable or RF coaxial cable for
VCR features.
Connecting the speaker wires to the speak-
er jacks
1
Connect the supplied speakers using the sup-
plied speaker wires. Match the colors of the
wires to the colors on the jacks. Hold down
the jack tab while inserting the stripped por-
tion of the speaker wire into the jack.Then,
release the tab. Make sure you do not insert
the wire too far. None of the rubber-coated
wire should be clamped by the jack tab.
AUDIO RECEIVER
COAXIAL DIGITAL
AUDIO IN
2
(ODER)
FL
VCR
DVD/VCR
MW
FR
C
Front
Front
Speaker
(right)
Center Speaker
AV1(TV)
Speaker
SL
SR
W
RF OUT
AERIAL
(left)
Subwoofer
TV ANTENNA
FM
(75Ω)
DIGITAL
AUDIO OUT
COAXIAL
S-VIDEO
OUT
SPEAKER (4Ω)
Rear Speaker
(left surround)
Rear Speaker
(right surround)
FL (Front Left - white)
FR (Front Right - red)
C (Center - green)
SL (Surround/Rear Left - blue)
SR (Surround/Rear Right - grey)
W (Subwoofer - purple)
AV2
(DECODER)
FL
FR
C
VCR
DVD/VCR
MW
AV1(TV)
SL
SR
W
RF OUT
AERIAL
TV ANTENNA
FM
(75Ω)
DIGITAL
AUDIO OUT
COAXIAL
S-VIDEO
OUT
SPEAKER (4Ω)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 8
Setting Up your System
Setting up Surround Sound
Using the Remote Control
Connect all the speakers and set up the System properly in
order to enjoy the Home Cinema experience.
Place the FRONT Left and Right speakers at equal distances
from the TV and at a 45-degree angle from the listening posi-
tion.
• Direct the remote control at the remote sensor of the
System.
• Do not drop the remote control.
• Do not leave the remote control near extremely hot or
1
humid place.
2
3
Place the CENTER speaker above or below the TV to localize
the sound.
Place the REAR (Surround) speakers at normal listening ear
level, facing each other or mounted on the wall. Use the sup-
plied mounting brackets to mount speakers to the wall.
Place the Subwoofer on the floor, near the TV.
• Do not spill water or put anything wet on the remote con-
trol.
PlayableVideo CassetteTapes
Philips Consume Electronics recommends that only video cas-
sette tapes that have theVHS mark and High Quality (HQ) sys-
tem is compatible with this System.This
4
Center Speaker
Subwoofer
Front
Speaker
(left)
Front
Speaker
(right)
TV
System has an Automatic Head Cleaner.
Recording Prevention
Video cassette tapes have record tabs to
ensure recordings are not erased accidentally.
To prevent recording, break off the tab with a
screw-driver.
1
1
2
VIEWING AREA
To allow recording, cover the hole with cello-
phane tape.
Rear Speaker
(left surround)
Rear Speaker
(right surround)
2
Notes:
– Use only tapes with VHS mark.
– Remove any adhesive stick-on notes from the tape
before inserting into the System.
– Periodic maintenance is required to maintain your
System performance.
Notes:
– Connect the speaker wires correctly. Improper connec-
tions may short circuit the System.
– For optimal sound, use the supplied speakers.
– Do not connect more than one speaker to any pair of
speaker jacks on the System.
– Video heads will require replacement after a period of
time. Only an authorised service center should perform
this service.
– Do not connect speakers with an impedance lower than
6 ohms.
– Sit in your usual listening position to set up the speaker
balance.
– To avoid magnetic interference, do not place the FRONT
speakers too close to yourTV.
– Placing the REAR (Surround) speakers farther from the
listening position than the FRONT and CENTER speak-
ers will weaken the Surround Sound effect.
– Secure all speakers to prevent accidents and improve
sound quality. Use the supplied mounting brackets to
mount speakers to a wall.
Turning on your System
The following steps only be performed when you insert the AC
PLUG at the first time.
Turn on the TV and select the
video channel on the TV.
Plug in the System.
Press K/L repeatedly to select
your desired language.
SELECT
K
L
1
→ ENGLISH
FRANÇAIS
2
3
ESPAÑOL
DEUTSCH
ITALIANO
SVENSKA
NEDERLANDS
PUSH MENU TO CONTINUE
4
5
Press DISC/VCR MENU.
Confirm with
G.
SKIP/P+
The automatic TV channel search
starts.
PLEASE WAIT
6
7
'TIME' and 'DATE' will appear on
the TV screen.
Check 'TIME'. If required, please
change the time with numerical key
pads.
Check if the displayed settings for
'DAY', 'MONTH' and 'YEAR' are
correct.
When all information is correct,
save by pressing DISPLAY/STA-
TUS/EXIT.The preparation for use
is now complete.
External Input Mode (forVCR features)
START FINISH
❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚
To receive the signal from an external input (decoder, satellite
receiver, video camera, anotherVCR etc.), connect to the AV2
(DECODER) socket, and enter “002” with numerical key pads
to appear “AV2” on the TV screen.
If you use the AV1 (TV) socket, enter “001” with numerical key
pads to appear “AV1” on the TV screen.
8
9
TIME --:--
If you use the front AUDIO/VIDEO input jacks, enter “003” with
numerical key pads to appear “AV3” on the TV screen.
DATE --/--/--
SMART CLOCK [ON]
Inserting batteries into the Remote Control
END=EXIT
1
2
Open the battery cover.
Insert batteries (AA size) with the
correct polarity as indicated by the
+ and - symbols inside the battery
compartment.
Note:
– If the System has been completed AUTOTUNING at this
procedure, this initial menu has never shown even if
power failure is occured or inserted AC plug again.
3
Close the cover.
CAUTION!
– Remove batteries if they are exhausted or not to be used
for a long time.
– Do not use old and new or different types of batteries in
combination.
– Batteries contain chemical substances, so they should be
disposed off properly and kept away from children.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 9
Setting Up your System
6
7
Press K/L to select CHANNEL, then press
B.
Video Channel Setting
Video channel setting will be necessary, if your System is con-
nected to the TV via the coaxial cable.
Insert a pre-recorded tape into the System.The System will turn
on and start playback automatically.If playback does not start,
press PLAY B .
Select and adjust your TV to channel 36.
• If the playback picture appears on the TV screen, continue
with step 8.
• If channel 36 is employed for broadcasting, or interference
lines appear on the picture, the RF converter must be set to
a different channel between CH22 and CH69. Continue with
step 3.
Press DISC/VCR MENU.
Press K/L to select INITIAL SET
Press K/L.The System tuner will begin to search up or down
automatically.When a channel is found, the System will stop
searching and the picture will appear on the TV Screen.
•You can select desired channel number by using numerical
key pads.You must refer to the channel plan and press three
digits to select the channel number. (To select channel 24,
first press “0” button then press “2” and “4”).
• If this is the channel you want, press B.
• If you want to remove scrambled signals, press K/L to select
DECODER.Then, press B to select [ON].
1
2
8
Press DISPLAY/STATUS/EXIT to exit.
Notes:
–To confirm that a channel has been added, press the
3
4
G /
H buttons.
SKIP/P-
SKIP/P+
– You should select the satellite channels to be received by
the satellite receiver directly on the receiver itself.
SELECT
K
L
CHOOSE
B
UP.Then, press B.
Press K/L to select RF OUT.Then,
press B twice.
→ RF OUT CH 36
5
6
Press K/L to select a channel
which is not used for broadcasted
between channel 22 and channel 69
in your area, then press B.
FollowTV (AutomaticTV channels sorting)
When the automatic channel search function is activated, the
TV channels are saved in a specific order.This may vary from
the order of TV channels on the TV.
This function changes the order of TV channels saved in the
System to match that of the TV.
Make sure that the System and the TV are connected by a
scart cable.
SET=0-9
END=EXIT
•You can also see the selecting RF channel in the display.
Press DISPLAY/STATUS/EXIT to exit.
7
8
Set the TV channel to the RF OUT CHANNEL which was
selected on the System.A picture from theVCR will appear on
the TV screen. If a picture does not appear, repeat steps 3 to 7
using a different channel which is not used for broadcasting.
Press STOP C to stop the tape.
1
2
3
4
PressVCR, then DISC/VCR MENU.
SELECT
K
L
CHOOSE
B
AUTO TUNING
MANUAL TUNING
→FOLLOW TV
MOVE
Press K/L to select TUNER SET
UP, then press B.
Press K/L to select 'FOLLOW TV'
, then press B.
'P:01' will appear in the System dis-
play.
Note:
– You may also access the RF OUT CH menu by pressing
and holding DISC/VCR MENU for 3 seconds during
power off until the RF OUT CH menu appears.
END=EXIT
I cannot switch myTV set to programme number '1'
* If you have connected additional devices to socket
Automatic Channel Setup
AV2(DECODER), please disconnect these devices. Because of
other connected devices, the TV set could switch to the pro-
gramme number of the scart socket.
You can programme the tuner to scan only the channels that
you can receive in your area.
Turn on the TV and select the video out channel on your TV.
PressVCR, then DISC/VCR MENU.
Press K/L to select TUNER SET UP, then press B.
Press K/L to select AUTO TUN-
1
2
3
4
'NOTV SIGNAL' will appear in theTV screen.The
System is not receiving a video signal from theTV.
Check the plug on the scart cable.
Check your TV's operating instructions to see which scart socket
is used for video signals.
If this does not help, it's not possible to use this function. Please
read the section 'Sorting and Clearing TV channels manually'.
ING, then press B.
•The tuner scans and memorizes
PLEASE WAIT
all the active channels in your
START
❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚
FINISH
area.After scanning, the tuner
stops on the lowest memorized
channel.
5
Select programme number '1' on the TV.
6
Confirm with B on the System remote control.The System
compares the TV channels on the TV and the System.
If the System finds the same TV channel as on the TV, then it
stores it at 'P01'.
5
Press
G /
H or
SKIP/P-
SKIP/P+
numerical key pads to scan through channels you have
received.
7
8
9
Wait until the next number, e.g. 'P:02' appears in the display.
Select the next programme number on the TV, e.g. '2'.
Confirm with B.
Manual Channel Preset
PressVCR, then DISC/VCR MENU.
Press K/L to select TUNER SET UP, then press B.
Press K/L to select MANUAL
TUNING, then press B.
Press K/L to select PROG., then
press B.
Press K/L or numerical key pads
1
2
3
10 Repeat steps 7 to 9 until you have assigned a programme num-
ber to all TV channels.
MANUAL TUNING
11 To end, press DISPLAY/STATUS/EXIT.
→PROG.
CHANNEL
DECODER
SKIP
P55
4
5
055
[OFF]
[OFF]
to select your desired programme SET=K
L
OR 0 – 9
END=EXIT
number, then press B.
•You can select programme num-
ber 01-99.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 10
Setting Up your System
Sorting and clearingTV channels manually
Setting the RF out channel (forVCR fea-
tures)
After you have performed the automatic channel search you
may not agree with the sequence in which the individual TV
channels have been allocated to the programme positions (pro-
gramme numbers) of the System.You can use this function to
individually sort the TV channels already saved or to delete
unwanted TV channels or those with poor reception.
In some reception locations it is possible that a TV channel will
be sent on the same or similar frequency as the System.
Result:As soon as the System is switched on, the reception
quality for this or several other TV channels will decrease.
The following steps will show you how to change the pre-set
'transmission' (RF out channel) frequency on the System.
PressVCR, then DISC/VCR MENU.
The clock resets automatically
1
2
If you save a TV channel that transmits TXT/PDC on programme
number ‘P01’, date and time will constantly be updated.As a result,
time changes, i.e. daylight savings time, will be set automatically.
Press K/L to select 'INITIAL SET UP' , then press B.
What is RF out channel?
This electronic component in the System allows the device to
transmit audio and video signals via the aerial cable.These signals
can be received on a TV set just like TV channels.
What is RF out channel frequency?
1
2
3
4
PressVCR, then DISC/VCR MENU.
MOVE
→P01: 02
P02: 03
P03: 05
P04: 10
P05: 74
P06: 90
P07: 99
P08: 121
P09: 124
P10: 130
Press K/L to select 'TUNER SET
UP' , then press B.
Press K/L to select 'MOVE' , then
press B.
Press K/L to select the saved TV
channel that you want to change.
Confirm with B.
Move the selected channel with K/L to the programme num-
ber you want to assign.
This frequency or channel indicates the channel on which the
audio or video signal is transmitted.
3
4
5
Press K/L to select 'RF OUT' , then press B.
Press B.
Press K/L or numerical key pads to select a free (not allocat-
ed) channel between channel 22 and 69 in your area.
SELECT
END=EXIT
K
L
CHOOSE
B
5
6
6
7
Press B.
To end, press
DISPLAY/STATUS/EXIT.
SELECT
K
L
CHOOSE
B
7
8
Confirm with B.
To assign other TV channels to a programme number, repeat
steps 4 to 7.
→RF OUT CH
36
9
Confirm the assignment of the TV channel with MOVE menu.
10 To exit the MOVE menu, press DISPLAY/STATUS/EXIT.
END=EXIT
Setting the language (forVCR features)
You have the option of setting one of the displayed languages
for the on-screen menu (OSD). However, the System display
will only display English text regardless of this setting.
If you cannot get an interference-free picture and sound, switch
the built-in modulator off.
Press L repeatedly until "--" appears next to "RF OUT CH" on
the TV screen.
1
2
PressVCR, then DISC/VCR MENU.
Press K/L to select 'INITIAL SET
UP' , then press B.
Press K/L to select 'LANGUAGE',
then press B.
Select the desired language with
K/L.
To end, press
Then confirm with B. In that case, please connect yourVCR to
your TV with a Scart cable.
SELECT
K
L
→ ENGLISH
FRANÇAIS
ESPAÑOL
DEUTSCH
ITALIANO
SVENSKA
3
4
5
Decoder allocation (forVCR features)
Some TV channels transmit encoded TV signals which can only
be viewed with a purchased or rented decoder.You can con-
nect such a decoder to this System.The following function will
automatically activate the connected decoder for the desired
TV channel.
NEDERLANDS
END=EXIT
DISPLAY/STATUS/EXIT.
1
Switch the TV on. If applicable, select the programme number
for the System operation.
Press K/L or numerical key pads to select the TV channel
which you would like to allocate the decoder to.
Press DISC/VCR MENU.The main menu will appear.
Press K/L to select 'TUNER SET UP'.Then press B.
Setting the clock
If the display shows an incorrect time or ' --:-- ', the time and
date must be reset manually.
If a TV channel that transmits TXT/PDC (teletext/PDC) is
stored under programme number 'P01', time/date will automat-
ically be taken from the TXT/PDC information. (SMART
CLOCK)
2
3
4
MANUAL TUNING
5
Press K/L to select 'MANUAL
1
2
3
4
PressVCR, then DISC/VCR MENU.
TUNING'.Then press B.
PROG.
CHANNEL
→DECODER
SKIP
P55
Press K/L to select 'INITIAL SET UP' , then press B.
Press K/L to select 'CLOCK' , then press B.
Check the time in 'TIME'. If
required, please change the time
with numerical key pads.
Check 'DAY', 'MONTH' and 'YEAR'
in the same way.
6
7
Press K/L to select 'DECODER'.
Press B to select 'ON' (Decoder
switched on).
055
[OFF]
[OFF]
TIME --:--
SELECT
K
L
CHOOSE
B
END=EXIT
DATE --/--/--
5
6
7
SMART CLOCK [ON]
How can I switch off the decoder?
Use B to select 'OFF' (Decoder switched off).
Choose ‘SMART CLOCK’ ON or
OFF with B.
To end, press
END=EXIT
8
To end, press DISPLAY/STATUS/EXIT.
The decoder has now been allocated to this TV channel.
DISPLAY/STATUS/EXIT.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 11
VCR Playback
Playing cassettes
You can use this System to play back recordedVHS videocas-
settes.You can operate the System using the remote control or
the buttons on the front of the System.
If you press PLAY, STOP, FF or REW while the set is in Stand-
by, the power will be automatically turned on.Additionally, if a
cassette was already inserted, the corresponding operation will
be performed.
Your System can only record and play standardVHS cassettes.
Put a cassette into the cassette slot.The cassette is inserted
automatically.
Press PLAY B to view the tape.
To stop the playback, press STOP C or STOP/EJECT C A on
the System.
Searching for a tape position with picture
(scanning)
1
2
While a cassette is playing, press REW
(forward) one or more times.
(rewind) or FF
h
g
Press PLAY B to resume playback.
Still picture / slow motion
1
During playback, press PAUSE
still picture.
to stop the tape and display a
k
1
2
3
During playback, press SLOW to play the tape in slow motion.
Press PLAY B to resume playback.
Scanning and still/slow motion interferes with the picture quali-
ty.The sound is switched off.This is not a fault in your System.
2
3
4
To eject the cassette, press STOP/EJECT C A on the System
when the System stops the playback.
Searching for tape position without picture
(forward wind and rewind)
1
2
3
Stop the tape with STOP
.
C
DIGITAL STUDIO PICTURE CONTROL
Philips has developed a system which produces the best possible
playback quality. For old and often-used video cassettes, this sys-
tem reduces interference. For new or high quality cassettes, it
emphasises the details.
Press REW
(rewind) or FF
(forward).
h
g
To stop the tape, press STOP C.
Picture/ sound quality is poor
Index search
Every time a tape is recorded an index marking is written on
the tape.
These marked positions can be found again quickly and easily
later.
When playing rental videos or older, poorer quality cassettes, it
may not be possible to completely filter out picture and sound
interference.This is not a fault in your machine. Read the section
'Manual Tracking'.
Do I need to change the playback speed when playing
back LP recordings?
During playback, the correct speed will automatically be selected.
For more information, please read the section 'Selecting the
recording speed (SP or LP)' in the chapter 'VCR Manual
Recording'.
1
2
3
To search for the previous marking, press SEARCH/INDEX
and then REW
3
.
h
For the next marking, press SEARCH/INDEX 3 and then
FF
.
g
As soon as the System finds this marking, it automatically
switches to playback.
Playing back NTSC cassettes
ManualTracking
This System can also play back cassettes that have been
recorded in SP [Standard Play] or SLP [Super Long Play] mode
in the NTSC standard (for example,American cassettes).
However, this only works on PAL-television sets that are suit-
able for a picture frequency of 60Hz.
To manually adjust the tracking during playback and slow
motion playback, press SKIP/P+G or SKIP/P-H.
Tracking will return to Automatic Tracking Adjustment when
you press STOP C, insert a tape, or press PLAY B.
To remove vertical jitter in a Still picture, press SKIP/P+G or
SKIP/P-H.
Displaying current tape position
The following information is displayed on the screen: e.g.:
0:02:45 shows the counter in hours, minutes and seconds.
SP/LP: will show the recorded speed of your cassette
'REM 0:06': will show the actual amount of playing/recording
time left on the tape in hours and minutes.
When you play an NTSC cassette, the System will show
'REM -:--'.
How can I set the counter to '0:00:00'?
You can set the counter to '0:00:00' with CLEAR.
When you put a cassette in the System, the counter will automat-
ically reset to '0:00:00'.
The counter does not move
This occurs when there are no recordings on a portion of a tape.
This is not a fault in your System.
The screen shows '-0:01:20'
If you rewind a cassette from the tape position '0:00:00', the
counter will show for instance, '-0:01:20' (the cassette was
rewound to 1 minute and 20 seconds before '0:00:00').
'-:--' is displayed in the 'REM' counter
This counter will automatically recognise the length of the tape. In
addition, when you put in a cassette the System must first calcu-
late the time played.Therefore, '-:--' appears first and only after
the tape has been running for a few seconds, the correct playing
time will be shown.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 12
VCR Manual Recording
General information
Automatic controlled recording from a
satellite receiver (RECORD LINK)
This function automatically starts recording on the switched-off
System when a video signal is recognised through the connect-
ed scart cable. If your satellite receiver has a programming
function, the recording will start automatically (as long as the
satellite receiver is switched on).
Use a scart cable to connect scart socket AV2(DECODER) on
the System to the corresponding scart socket on the satellite
receiver.
Switch on the TV. If required, select the programme number for
the System.
Use 'Manual Recording' to make a spontaneous recording
(for example, a programme currently being shown).
If you want to start and stop a recording manually, read the
section 'Recording without automatic switch-off'.
Read the section 'Direct Record' if you want to record a
programme currently being shown.
Read the section 'Automatic controlled recording from a
satellite receiver (RECORD LINK)', if you want a record-
ing to be controlled automatically by a satellite receiver.
1
2
Recording without automatic switch-off
3
4
5
6
7
Press DISC/VCR MENU.The main menu will appear.
Select 'RECORD SET UP' with K/L and confirm with B.
1
2
Insert a cassette.
Use G /
H to select the programme num-
SKIP/P+
SKIP/P-
Select 'RECORD LINK' with K/L.
Select function 'ON' with B.
To end, press
SELECT
K
L
CHOOSE
B
ber you want to record, for example, 'P01'.
To start recording, press REC I.
Stop recording with STOP C.
RECORD SPEED [SP]
DIRECT RECORD [OFF]
→RECORD LINK
3
4
[OFF]
DISPLAY/STATUS/EXIT.
8
9
Insert a cassette.
Programme the satellite receiver
with the required information (pro-
gramme number of the TV channel,
start time, end time).
Linking up recordings (assemble cut)
END=EXIT
When you add a further recording to a cassette, which already
has a recording on it, a short blank (flicker) can appear between
the old and the new recording or the picture itself can flicker.
To help reduce these from occurring, proceed as follows:
Find the tape position of the old recording where you want to
insert the new recording.
If necessary, please see the operating instructions for your
satellite receiver.
10 Press TIMER SET.
1
The System is now ready to record.The beginning and end of
the recording is controlled via scart socket AV2(DECODER).
2
3
Look at the last minute of the old recording (playback).
Press PAUSE
at the tape position where the new recording
k
is to go and press REC I.
Now start recording as usual by pressing REC I on the
remote control.
'Direct Record'
4
5
With Direct Record, you can record the right TV channel in
seconds even if your System is switched off. If the recording is
started manually, the System uses the current TV channel set
on the TV.You will find more information on how to switch
'Direct Record' on or off in the next section. Make sure that
your System socket AV1(TV) and the TV are connected by a
scart cable.
On the TV, select the programme number you want make the
recording from.
Press REC I with the System switched off.
Stop recording with STOP C.
Stop recording with STOP C.
Selecting the recording speed (SP or LP)
LP allows to double the recording duration on tape (for exam-
ple six hours instead of three hours on an E180 cassette).
Switch on the TV set. If required, select the programme num-
ber for the System.
Press DISC/VCR MENU.The main
menu will appear.
Select 'RECORD SETUP' using
K/L and confirm with B.
Select 'RECORD SPEED' using K/L.
Select the required recording
speed with B.
1
1
2
3
SELECT
K
L
CHOOSE
B
2
3
→RECORD SPEED [SP]
DIRECT RECORD [OFF]
RECORD LINK
[OFF]
How does Direct Record work?
The System compares the TV channel selected on the TV set with
its stored TV channels via the scart cable. If the same TV channel
is found, it switches the System to the corresponding programme
number and starts recording. Please do not change the TV chan-
nel on the TV set during the search so as not to affect the
process.
4
5
END=EXIT
'SP'/'LP' /'AUTO'
'SP': StandardPlay (normal recording speed) offers the usual first-
class picture quality.
'LP': LongPlay (half recording speed, double recording time). 6
hours can be recorded on a 3-hour cassette (E180) with a some-
what reduced picture quality.
'AUTO':AUTOmatic Long Play. If there is not enough space on
the tape to record a programmed recording in standard speed,
the recording is automatically done in 'LP'
(Longplay). Otherwise, the recording speed will be 'SP'
(Standardplay).
Switching 'Direct Record' on or off
Switch on the TV. If required, select the programme number for
the System.
1
2
3
Press DISC/VCR MENU.The main menu will appear.
Select 'RECORD SET UP' with
K/L and confirm with B.
In 'DIRECT RECORD', select 'OFF'
(Direct Record off) or 'ON'
(Direct Record on) with B.
To end, press
SELECT
K
L
CHOOSE
B
RECORD SPEED [SP]
4
→DIRECT RECORD [OFF]
6
To end, press DISPLAY/STATUS/EXIT.
RECORD LINK
[OFF]
5
6
DISPLAY/STATUS/EXIT.
Press STANDBY-ONy.
END=EXIT
12
Download from Www.Somanuals.com. All Manuals Search And Download.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 13
VCR Manual Recording
Programming a Recording (TIMER)
Direct dubbing
General information
Follow the steps below to copy a DVD or video disc to a
videotape.This will be possible only if the DVD is not copy
protected.
Put a videotape in the cassette compartment. Make sure the
tape’s record tab is intact and the tape is long enough to
record the disc.
Use a TIMER programming to automatically start and stop a recording
at a later time or date.The System will switch to the right programme
number and begin recording at the correct time.With this System, you
can pre-programme up to eight recordings within a period of one
year.To make a programmed recording, your System needs to know:
* the date you want to make the recording
1
2
3
PressVCR.
Select the recording speed.
* the programme number of the TV channel
* the start and stop time of the recording
*VPS or PDC on or off
This information is saved in a TIMER block.
Details are at “Selecting the recording speed (SP or LP)”.
Put the DVD you want to copy in the disc tray.
Press DVD.
Press PLAY B.While disc is playing, press PAUSE k at the
point you wish to start recording.
Press DIRECT DUBBING to record.
To pause the recording.
Press PAUSE k.
To resume recording.
Press PAUSE k again.
To stop the recording.
4
5
6
What is 'VPS/PDC'?
'VPS' (Video Programming System)/ 'PDC' (Programme Delivery
Control) are used to control the start and duration of TV channel
recordings. If a TV programme starts earlier or ends later than sched-
uled, the System will turn on and off at the correct time.
What do I need to know about 'VPS/PDC'?
7
Usually theVPS or PDC time is the same as the start time. But if
your TV guide shows aVPS or PDC time which is different from
the programme’s scheduled start time, e.g. 20.10 (VPS/PDC
20.14), you must enter theVPS/PDC time exact to the minute. If
you want a start time different from theVPS/PDC time, you must
switchVPS/PDC off.
Press STOP C.
Recording(From DVDToVCR)
1
2
Insert a DVD without copyright protection in the tray.
Insert a video cassette tape with its erase prevention tab in
place.
Programming a recording
(with the 'SHOWVIEW® system')
3
4
Select the recording speed.
R
Details are at “Selecting the recording speed (SP or LP)”.
Enter “004” with numerical key pads to appear “DISC” on the
TV screen.
You no longer need to tediously enter the date, programme
number, start and end time.All the information needed for pro-
gramming is contained in the SHOWVIEW-programming number.
You can find this SHOWVIEW number in most TV listing maga-
zines written next to the concerned programme.
5
6
7
8
Press REC I.
Change to DVD operation mode.
Press DVD, then PLAY B to begin the playback of a DVD.
PressVCR, then STOP C to stop recording.
1
2
Press SV/V+.
ShowView system
Enter the entire SHOWVIEW num-
ber.This number is up to 9 digits
long and can be found next to the
start time of the TV programme in
your TV listing magazine. [e.g: 1-
234-5 or 1 234 5]
If you make a mistake, you can
clear your input with CLEAR.
Press SV/V+.
ShowView No.
12345 – – – –
SET=SV/V+
CORRECT=CLEAR
END=EXIT
ShowView system
3
4
→ONCE
DAILY
WEEKLY
Select ONCE, DAILY or WEEKLY
recording with K/L.Then press B.
SELECT
K
L
CHOOSE
B
END=EXIT
Selecting once/daily/weekly recordings
Using K/L, select from the following options:
'ONCE': Recording once
'DAILY': Repeated daily recordings (Monday to Friday)
'WEEKLY': Repeated weekly recordings (every week on the same
day)
'- -' appears at PROG. .
* The programme number of the TV channel has not yet been
assigned to the SHOWVIEW number. Using the numerical key
pads, select the corresponding programme number (name) of
the TV channel.
The following message appears on the screen:'ERROR'
* The entered SHOWVIEW number is incorrect. Correct your input
or end with DISPLAY/STATUS/EXIT.
* Check the time/date (see chapter 'Installing your video', section
'Setting the time and date').
* A daily recording was entered for the wrong day. Daily pro-
gramming can only be used for recordings to be made from
Monday to Friday.
The following message appears on the screen:'TIMER
NOT COMPLETED'
* The channel is wrong.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 14
Programming a Recording (TIMER)
5
The decoded data appears after confirmation.You can go back
to change the data. Select the corresponding input field using
B or CLEAR. Change the data with numerical key pads.
When all inputs are correct, press DISPLAY/STATUS/EXIT.The
programming information is stored in a Timer block.
How to check, or delete a programmed
recording (TIMER)
1
2
PressVCR, then DISC/VCR MENU.
6
SELECT
K
L
CHOOSE
B
Press K/L to select 'TIMER'.Then
press B.
Press K/L to select 'TIMER LIST' ,
then press B.
ONCE
DAILY
WEEKLY
Switching on 'VPS/PDC' in the 'START' input field
Select 'VPS/PDC' using B or CLEAR. Press '1' to switch off
'VPS/PDC' or press '2' to switch on 'VPS/PDC'.
3
→TIMER LIST
4
5
Select timer block with B.
To cancel the recording, press
CLEAR.
7
8
Insert a cassette with an intact security tab (unprotected).
Press TIMER SET.
END=EXIT
6
7
To end, press DISPLAY/STATUS/EXIT.
Press TIMER SET.
'TIMER REC' will light up on the System.
Programming a recording
(without the SHOWVIEW system)
PressVCR, then DISC/VCR MENU.
How to change a programmed recording
(TIMER)
1
2
3
1
2
3
PressVCR, then DISC/VCR MENU.
Press K/L to select 'TIMER' ,then press B.
Press K/L to select ONCE, DAILY,
SELECT
K
L
CHOOSE
B
Select 'TIMER' with K/L.Then
press B.
Select ONCE, DAILY or WEEKLY
recording with K/L.Then press B.
If all Timer blocks are in use,‘FULL’
will appear on the OSD.
→ONCE
DAILY
WEEKLY
TIMER LIST
ONCE
or WEEKLY recording with K/L ,
TIMER - 1 2 3 4 5 6 7 8 -
then press B.
4
5
Select a TIMER block with numeri-
cal key pads. (The flashing number
indicates an empty TIMER block.)
END=EXIT
4
Select the desired Timer block with
numerical key pads. (The flashing
Press CLEAR to delete information
SELECT TIMER NUMBER
and input correct information with END=EXIT
numerical key pads.
number indicates an empty TIMER block.)
6
7
To end, press DISPLAY/STATUS/EXIT.
Press TIMER SET.
Selecting once/daily/weekly recordings
Using K/L, select from the following options:
'ONCE': Recording once
'DAILY': Repeated daily recordings (Monday to Friday)
Hints forTimer Recording
• If there is a power failure or the System is unplugged for
more than 1 minute, the clock setting and all timer settings
will be lost.
'WEEKLY': Repeated weekly recordings (every week on the same
day)
5
Enter the Start time (START) End time (STOP), Programme
number (PROG.),VPS/PDC information and the Date with
numerical key pads.
• If a tape ends during TIMER RECORDING, the System will
stop, eject the tape, and switch to the DVD mode automati-
cally as the TIMER REC light blinks. (If the DVD power is off,
the System will become the STANDBY status).
• If a tape is not in the System or does not have a record tab,
the TIMER REC light flashes and timer recording will not
operate. Please insert a recordable tape.
• When timer recordings are set, the TIMER REC light will
come on.To use the System as usual until the time for the
recording, press TIMER SET so that the TIMER REC light dis-
appears. Press the System to chooseVCR, DVD or TUNER
modes, then continue with the other features as described in
this manual.
Programme numbers of the ' AV1 ' , ' AV2 ' and ' AV3'
scart socket
You can also programme recordings from external sources via
scart socket AV1(TV),AV2 (DECODER) or AV3(FRONT).
6
When all inputs are correct, press DISPLAY/STATUS/EXIT.The
programming information is stored in a TIMER block.
Insert a cassette with an intact security tab (unprotected).
Press TIMER SET.
7
8
'PRESS TIMER SET BUTTON FOR TIMER RECORDING' appears on
the screen
* Press TIMER SET on several minutes before the start of a pro-
grammed recording.
OTR (OneTouch Recording)
This function enables you to set a recording length simply by
pressing RECORD on the System.
Follow steps 1 to 2 in “Recording without automatic switch-
off” section.
Press RECORD on the System repeatedly until the desired
recording length appears.
Error message: 'FULL'
• If this error message appears after you select 'ONCE', 'DAILY', or 'WEEK-
LY' on TIMER menu and press B, then all TIMER blocks are already pro-
grammed. No more recordings can be programmed. If you want to clear or
check a programmed recording (TIMER block),select the programme num-
ber on TIMER LIST menu and press CLEAR.
1
2
0:00
0:30
1:00...
7:30
8:00
REC (Normal recording)
• Recording stops when 0:00 is reached.
To check time remaining during an OTR
Press DISPLAY/STATUS/EXIT.
To change the recording length during an OTR
Press RECORD until the desired length appears.
To stop an OTR before recording is finished
Press STOP C .
To cancel the OTR but continue recording
Press RECORD repeatedly until “REC” appears in the upper
left corner of the TV screen.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 15
Other Functions
• During playback of the recorded tape in Hi-Fi mode:
Switching the status display off or on
Display on
the TV screen
Mode
Stereo
L
AUDIO OUTPUT
Along with the on screen menu, the status display also displays
information on the current operating status (counter, playback,
recording,TV channel, etc.) on the TV screen.You can switch
off the information about the operating status so that the sta-
tus display is not recorded when copying videocassettes.
L
Hi Fi L Audio
Hi Fi R Audio
Hi Fi L Audio
Hi Fi L Audio
Hi Fi R Audio
Hi Fi R Audio
Normal Audio
Normal Audio
STEREO
R
L
LEFT
RIGHT
MONO
R
L
R
L
1
2
PressVCR, then DISC/VCR MENU.
Press K/L to select 'VCR SET UP'
, then press B.
Press K/L to select 'STATUS DIS-
PLAY' , then press B.
R
SELECT
K
L
CHOOSE
B
→STATUS DISPLAY [ON]
Monaural
BLUE BACKGROUND [ON]
R
3
4
5
CLOCK DISPLAY
[ON]
Hi Fi L Audio
L
+
Normal Audio
Press K/L to select 'ON' or 'OFF'
, then press B.
To end, press
MIX
MIXED
Hi Fi R Audio
R
+
Normal Audio
END=EXIT
DISPLAY/STATUS/EXIT.
Digital Sound
Which settings can I choose?
'ON': Shows the status display for a few seconds only.
'OFF': Switches off the status display.
Digital Sound lets you enjoy special sound effects that have
preset equalizer settings, providing the best music reproduc-
tion.The default setting of the System is OPTIMAL.
Press SOUND repeatedly to select OPTIMAL, CLASSIC, POP,
or JAZZ.
The selected Digital Sound light will appear on the front of the
System.
Blue Background on or off
1
If you want the TV screen to be solid blue when a weak signal
is received, set BLUE BACKGROUND to ‘ON’.The screen will
be blue and the sound will be muted. Or, if you want to receive
the weak signal, set BLUE BACKGROUND to ‘OFF’.
PressVCR, then DISC/VCR MENU.
1
2
Press K/L to select 'VCR SET UP'
Surround Sound
SELECT
K
L
CHOOSE
B
, then press B.
For proper Surround Sound, connect the speakers and
Subwoofer correctly.The Center and Rear (Surround) speakers
only operate when Surround is On.The Discs or TV programs
must be recorded or broadcast in Surround Sound.
Press SURROUND to set Surround to On or Off.
When Surround is On, the SURR (Surround) light will appear
on the front of the System.When Surround is Off, the SURR
(Surround) light will be off.
STATUS DISPLAY [ON]
BLUE BACKGROUND [ON]
CLOCK DISPLAY
3
4
Press K/L to select 'BLUE BACK-
GROUND' , then press B.
Select 'OFF' (no blue background)
or 'ON' (blue background on) with
B.
→
[ON]
1
END=EXIT
5
To end, press
DISPLAY/STATUS/EXIT.
Programs broadcast in Stereo will produce some surround
sound effects when played in a surround mode. However, non-
Stereo programs will not have any sound at the Rear
(Surround) speakers.
Clock Display
This function allows you to switch the System display off. It is
useful in case you feel disturbed by the display-brightness while
watching TV in a dark room. It also reduces the power con-
sumption.
PressVCR, then DISC/VCR MENU.
Press K/L to select 'VCR SET UP'
, then press B.
Press K/L to select 'CLOCK DIS-
PLAY' , then press B.
Select 'OFF' (no clock display) or
'ON' (clock display on) with B.
To end, press
The following Surround Sound modes may be broadcast by
DVDs or TV stations.You cannot alter these Surround Sound
options at the System.
Matrix: Delivers sound through 5.1 Channels.You will have
sound at all five speakers (Front Left and Right, Center, and
Rear (Surround) Left and Right).
Dolby Digital: Dolby Digital is a high-quality audio compres-
sion technology first used in movies.This technology has since
been adopted for use in Consumer Electronic products and
allows you to enjoy the same type of sound in your home.Your
player has a built-in Dolby Digital decoder so you can enjoy
DVDs that include a Dolby Digital soundtrack.
1
2
SELECT
K
L
CHOOSE
B
STATUS DISPLAY [ON]
BLUE BACKGROUND [ON]
→CLOCK DISPLAY
[ON]
3
4
5
END=EXIT
DISPLAY/STATUS/EXIT.
Selecting the sound channel
You can select the
You can identify DVDs and equipment that contain Dolby
Digital by looking for the following logo:
•
During reception of bilingual broadcasts:
Dolby Pro Logic: A two-channnel analog format that proivides
sound through four speakers (Front Left and Right, Center, and a
single Rear (Surround)) when using a Dolby ProLogic Decoder. It
is compatible with a Stereo, but you will only have two-channel
sound (left and right) at the Stereo.
DTS (DigitalTheater System): Developed by Digital
Theater Systems, Inc., of the United States. Sound is com-
pressed to reduce its recording size. Since the compression
level is less than Dolby Digital, the quantity of data is greater
when decoded, providing clarity and depth in the sound.The
sound has a wider dynamic range and higher resolution.
desired sound channel
during playback or while
receiving TV channels
via the System.This
allows you to select a
desired language for
multi-language transmis-
sions.
Press AUDIO/BAND.
This will show the cur-
rent sound setting.
Press AUDIO/BAND
until the desired setting
appears in the display.
Display on
the TV screen
Mode
MAIN
SUB
AUDIO OUTPUT
L
Main Audio
Main Audio
Sub Audio
Sub Audio
Main Audio
Sub Audio
MAIN
R
L
SUB
R
L
R
MAIN
SUB
MAIN
SUB
1
2
•
Reception of stereo broadcasts:
Display on
the TV screen
Mode
Stereo
L
AUDIO OUTPUT
L
L Audio
Note:
STEREO
LEFT
R
L
R Audio
L Audio
- Surround Sound is not available when you are using
headphones.The SURROUND light will turn off.
R
L
R
L
L Audio
R Audio
R Audio
L+R Audio
L+R Audio
R
RIGHT
NONE
Monaural
R
15
Download from Www.Somanuals.com. All Manuals Search And Download.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 16
Playing a Disc
DVD-V
CD
VCD
DVD-V
Basic Playback
Title Menu
1
2
3
Press DVD, then TITLE.
• The title menu will appear.
If the feature is not available,
TV screen.
Press Arrow ( L / K / B / s ) to select an item, and OK to
confirm selection.
Getting Started
Turn on the power of the TV, amplifier and any other compo-
nents which are connected to the DVD system.
Make sure the TV and audio receiver (commercially available)
are set to the correct channel.
symbol may appear on the
1
2
3
Press STANDBY-ONy.
• Playback will begin at the selected Title.
Press DVD, then OPEN/CLOSE A to open disc loading tray.
Place the chosen disc in the tray, with the
label facing up.
Press PLAY B.
•The tray will close automatically, and
VCD
1
2
The title menu will appear.
Press numerical key pads to select the menu.
• Playback will start.
4
F
playback will then start from the first
chapter or track of the disc. If the play-
back does not start automatically, press
PLAY B.
DVD-V
Calling Up a Menu During Playback
•When you playback the DVD which a title menu is recorded,
it may appear on the screen. In this case, refer to “Title
Menu”.
• Press DISC/VCR MENU to call up the DVD main menu.
• Press TITLE to call up the title menu.
Note:
5
Press STOP C to stop playback.
- Contents of menus and corresponding menu operations
may vary between discs. Refer to the manual accompa-
nying the disc for details.
Notes:
- A “prohibited icon” may appear at the top-right on the
TV screen during operation, warning that
a prohibited operation has been encoun-
tered by the DVD system or the disc.
- With DVDs that use some titles for play-
back program signals, playback may start
from the second title, or it may skip these titles.
- During the playback of two layered disc, pictures may
stop for a moment.This happens when the 1st layer
switches to the 2nd layer.This is not a malfunction.
VCD
DVD-V
Step by Step Playback
1
2
3
During playback, press PAUSE k.
• Playback will pause and sound will be muted.
The disc goes forward by one frame each time PAUSE k is
pressed.
To exit step by step playback, press PLAY B.
VCD
Cancelling and Calling Back PBC Function
1
Insert aVideo CD.
• Playback will start automatically.
Press STOP C.
Press numerical key pads to enter the desired track number.
• PBC function is now cancelled and the playback of theVideo
CD will start.
To call back PBC function, press STOP C twice, and then press
PLAY B.
CD
VCD
DVD-V
Resume
1
2
During playback, press STOP C.
2
3
• Resume message will appear on the TV screen.
Press PLAY B, playback will resume from the point at which
playback was stopped.
• To cancel resume, press STOP C twice.
4
Notes:
•Title menu will appear on the display.
-The resume information stays on even when the power
is turned off.
- Some Video CDs with PBC function resume playback
from the beginning of the track.
General Features
DVD or video CDs may contain menus to navigate the disc
and access special features. Press the appropriate numerical key
pads or use Arrow ( L / K / B / s ) to highlight your selection
in the DVD main menu and press OK to confirm.
Fast Forward / Reverse Search
CD
MP3
VCD
DVD-V
Note:
1
2
During playback, press FF
g
or REW
h
repeatedly to select the
- Unless stated, all operations described are based on
remote control use. Some operations can be carried out
using the menu bar on theTV screen.
required forward or reverse speed: x2, x8, x50, x100.
• For video CDs, the speed is fixed at x2, x8, x30.
• For audio CDs, the speed is fixed at x16.
• For MP3, the speed is fixed at x8.
To return to normal playback, press PLAY B.
CD
VCD
DVD-V
Pause
1
2
During playback, press PAUSE k.
• Playback will pause and sound will be muted.
To continue playback, press PLAY B.
VCD
DVD-V
Slow Forward / Slow Reverse
During playback, press PAUSE k.
Press FF g or REWh .
1
2
•
Slow motion playback will begin and sound will be muted.
DVD-V
3
4
Press FF g or REWh repeatedly to select the required
speed: 1/16, 1/8, 1/2 of the normal playback.
To return to normal playback, press PLAY B.
Disc Menus
1
2
3
Press DVD, then DISC/VCR MENU.
•The DVD main menu will appear.
If the feature is not available,
Note:
symbol may appear on the
- Slow Reverse is not available on video CDs.
TV screen.
If disc menu is available on the disc, audio language, subtitle
options, chapters for the title and other options will appear for
selection.
4
Press Arrow ( L / K / B / s ) to select an item, and OK to
confirm selection.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 17
Playing a Disc
VCD
DVD-V
Zoom
Repeat
The Zoom function allows you to enlarge the video image and
to pan through the enlarged image.
Press ZOOM during playback.
• Playback will continue.
Press ZOOM repeatedly to select the required zoom factor:
x2, x4 or OFF.
Use Arrow ( L / K / B / s )to move the zoomed picture
across the screen.
To exit zoom mode, press ZOOM to OFF.
Notes:
• REPEAT are available only during playback.
1
2
3
4
DVD-V
RepeatTitle / Chapter
To activate the repeat function, press REPEAT during playback.
• The repeat mode changes as described below every time you
press the button.
OFF
CHAPTER
TITLE
(repeat off)
(current chapter repeat)
(current title repeat)
- Zooming function does not work while disc menu is
shown.
- x4 zoom is not available on some discs.
- only x2 zoom is available on video CDs.
Notes:
- RepeatTitle/Chapter is not available with some scenes.
-The REPEAT setting will be cleared when moving to
other title or chapter.
VCD
CD
Track
CD
VCD
There are three ways to begin playback on an Audio CD at a
specific Track.
RepeatTrack
To activate the repeat function, press REPEAT during playback.
• The repeat mode changes as described below every time you
press the button.
Using the Numerical key pads
1
Press numerical key pads to enter the desired Track number.
• Playback will start at the selected track.
• For single digit tracks (1-9), press a single number (eg. track 3,
press 3).
OFF
TRACK
ALL
(repeat off)
(current track repeat)
(entire disc repeat)
•
To play track 26, press +10, 2, 6 on the numerical key pads.
MP3
Using the SEARCH MODE
Press SEARCH/INDEX3.
•The track search display appears.
Within 30 seconds, select a desired track number using numer-
ical key pads. For single digits press “0” first.
• Playback will start at the selected track.
1
2
GROUP
(entire group
repeat)
OFF
(repeat off)
TRACK
(current track
repeat)
ALL
(entire disc
repeat)
Notes:
Using the SKIP/P- H ,SKIP/P+
During playback, press
G
to move to the next track.
-The REPEAT setting will be cleared when moving to
other track.
- Repeat playback does not function during repeat A-B
playback.
G
SKIP/P+
Press it repeatedly to skip subsequent tracks. Press
H
SKIP/P-
to go back to the beginning of the current track. Press it repeat-
edly to go to the previous tracks
Track number will appear briefly on the DVD system display
panel.
• If
.
•
CD
VCD
DVD-V
Repeat at A-B
Press REPEAT A-B at your chosen starting point.
A- appears briefly on the TV screen.
Press REPEAT A-B again at your chosen end point.
A-B appears briefly on the TV screen, and the repeat
sequence begins.
1
2
G is pressed while the playback is paused, the
playback will be paused again after skipping to the next track.
SKIP/P+
•
Note:
•
- SKIP/P- H , SKIP/P+ G are not available when play-
back is stopped.
3
To exit the sequence, press REPEAT A-B.
Notes:
DVD-V
Title / Chapter Search
-The repeat A-B section can only be set within the cur-
rent title (for DVDs), or current track (for audio CDs).
- Repeat A-B is not available with some scenes in DVD.
-To cancel the A point which was set, press CLEAR.
- Repeat A-B playback does not function during title,
chapter, track or all repeat playback.
1
2
Press SEARCH/INDEX 3once
for the Chapter search, twice for
the Title search during playback.
Enter the desired chapter/title
number using numerical key pads.
/2
VCD
DVD-V
CD
Time Search
1
2
During playback, press SEARCH/INDEX 3 three times
(CD/VCD: twice) to display the Time Search on the TV screen.
Within 30 seconds, enter a desired disc time using numerical
key pads.
• Playback will start at the specified time.
Press CLEAR to erase the incorrect input.
3
17
Download from Www.Somanuals.com. All Manuals Search And Download.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 18
Playing a Disc
CD
MP3
Program
On-Screen Information
You may determine the order in which tracks will play.
You can check the MP3 files during playback.
Press DISPLAY/STATUS/EXIT.
• The name of the file currently in play will be displayed.
Press DISPLAY/STATUS/EXIT again to show the track number,
the elapsed time, the repeat status, and the playback status at
the top of the screen.
1
2
In stop mode press MODE/SYSTEM.
•The PROGRAM screen will appear.
Press ▲ or ▼ to select a track,
then press OK.
• Press CLEAR to erase the
most recently entered pro-
gram.
1
2
TOTAL
T
T
•
will be displayed when the repeat play has been selected.
T - indicates Track repeat
T
T
T
T
T
T
3
Press PLAY B to play the pro-
grammed tracks.
G- indicates Group (folder) repeat
A - indicates Disc repeat
OK
T
Notes:
3
Press DISPLAY/STATUS/EXIT again to exit.
- While the program is being
played back, the STOP C works as follows.
- Press STOP C once and then PLAY again, playback will
restart from the point where STOP C was pressed.
MP3
Track Selection
B
1
2
Press SEARCH/INDEX 3during playback.
• The FILE LIST will appear.
Select a desired track using Arrow (L/K/B/s)
• Press B when you want to go to the next hierarchy.
• Press s when you want to go back to the previous hierarchy.
Press PLAY B to start playing
(Program continued)
- Press STOP C twice and then PLAY
B
again, playback will
.
restart from the track in the usual way. (Program cleared)
- Up to 99 programs can be entered.
- If you like to repeat the current track in the program, press
3
REPEAT repeatedly until
TRACK appears during play-
Notes:
back. If you like to repeat the entire program press
- Press SEARCH/INDEX
3to EXIT.
REPEAT repeatedly until
ALL appears during playback.
- Some selections may take a while to be recognized.
CD
Random Playback
MP3
Random Playback
This shuffles the playing order
of tracks instead of playback in
the sequence.
In stop mode, press
MODE/SYSTEM twice.
1
2
Press MODE/SYSTEM twice while playback is stopped.
Press PLAY B to play the tracks in random order.
RANDOM
CD [AUDIO]
TOTAL 0:45:55
1
2
RANDOM PROGRAM
-- no indication --
MP3
Program
•
RANDOM screen appears.
Press PLAY B to start ran-
dom playback.
PLAY
This feature allows you to program a mp3 disc to play in a
desired sequence.
Press MODE/SYSTEM during playback is stopped.
• The PROGRAM screen will appear.
Press K or L to select a track, then press OK, to save it in a
program.
• Press CLEAR to erase the incorrect input.
Press PLAY B to start programmed playback.
Note:
1
2
- If you like to repeat the current track in the random
selection, press REPEAT repeatedly until TRACK
appears during playback. If you like to repeat the entire
random selection press REPEAT repeatedly until
appears during playback.
ALL
3
MP3
MP3/JPEG Playback
DVD-V
Audio Language
When a CD with MP3 or JPEG files is inserted in the DVD sys-
tem, the MP3 or JPEG menu will appear on the TV screen, and
number of tracks is displayed on the front panel.
In stop mode, press K or L to
The DVD system allows you to select a language during DVD
disc (if multi language available) playback.
Press AUDIO/BAND during playback.
Press AUDIO/BAND repeatedly to select your desired lan-
guage.
1
2
1
select the desired group, MP3
track or JPEG file.
• If a group is selected, press
FOLDER
MP3
JPEG
Notes:
- Pressing AUDIO/BAND may not work on some DVDs with
multiple audio languages (e.g. DVDs which allow audio lan-
guage setting on the disc menu).
- Some discs allow audio language setting on the disc menu.
(Operation varies between discs, so refer to the manual
accompanying the disc.)
PLAY B or OK to go on to
the track selection screen.
OK
Press K or L to choose a
PLAY
track, then press PLAY B or
OK.
• If a track is selected, press PLAY B or OK to start playing
tracks. Starting from the one you’ve just chosen the subse-
quent tracks will be played.
• Choose FIRST PLAY to start playback from the beginning of
the listed tracks.
• Press TITLE to return to the first item.
Press STOP C to stop playback.
Notes:
VCD
CD
Stereo Sound Mode
1
Press AUDIO/BAND repeatedly during playback to select
between STEREO, L-CH or R-CH.
STEREO - both right and left channels are active (stereo)
L-CH - only left channel is active
2
- Folders are known as Groups; files are known asTracks.
R-CH - only right channel is active
3
- MP3 files are accompanied by
- JPEG files are accompanied by
icon.
icon.
- Maximum of 255 folders can be recognized.
- Maximum of 256 files can be recognized.
- Up to 8 hierarchies can be created.
This DVD system recommends the use of files recorded at the
below specifications:
• Sampling frequency: 44.1kHz or 48kHz
• Constant bit rate: 112kbps ~ 320kbps.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 19
Playing a Disc
DVD-V
DVD-V
Subtitle Language
Parental Control
The DVD system allows you to select a language for subtitle
during DVD disc (if available) playback.
Press DVD, then SUBTITLE during playback.
Press SUBTITLE repeatedly to select your desired subtitle lan-
guage.
•The selected language will be displayed on the display bar at
the top of the screen.
To turn off subtitles, press SUBTITLE repeatedly until OFF
appears.
Parental Control limits the disc viewing that exceed your set-
tings. (with a password or playback will stop.)
This feature allows you to prevent discs with alternative scenes
from being played by your children.
1
2
Parental Level
Parental Level allows you to set the rating level of your DVD
discs. Playback will stop if the disc’s ratings exceed the level
you set.
Press SYSTEM MENU/PROG in STOP mode.
Press B to select CUSTOM, then press OK.
Press s or B to select PARENTAL, then press OK.
Enter your four-digit password then press OK.
Press K or L to select PARENTAL
3
1
2
3
4
5
Notes:
- Some discs allow subtitle language setting on the disc
menu. (Operation varies between discs, so refer to the
manual accompanying the disc.)
- If the desired language is not shown after pressing SUBTI-
TLE several times, the disc does not have subtitles in that
language.
- If you choose a Language that has a 3 letter language
code, the code will be displayed every time you change the
Subtitle language setting. If you choose any other lan-
guages,‘---’ will be displayed instead. (Details are on page
21.)
LEVEL, then press OK.
6
7
Press K or L to select the desired
level, then press OK.
PARENTAL
PARENTAL LEVEL ALL
Press SYSTEM MENU/PROG to exit.
Notes:
- When doing this for the first time, enter any 4 digits.
(except for 4737)That number will be used as the pass-
word from the second time onward.
-To change the password, press K or L to select CHANGE,
then press OK. Enter the four-digit pass-word, then press
OK.
- With some DVDs, it may be difficult to find if they are com-
patible with parental lock. Be sure to check if the parental
lock function operates in the way that you have set.
- Record the password in case you forget it.
DVD-V
Camera Angle
Some DVD discs contain scenes which have been shot simulta-
neously from various angles.You can change the camera angle
when the (
) icon appears on the screen.
1
2
Press DVD, then ANGLE during playback.
•The selected angle will be displayed on the display bar at the
top of the screen.
IfYou Forget the Password
Press 4, 7, 3, 7 at step 4.
• Password will be cleared and parental level will be set to ALL.
Proceed the above steps 4-5 again.
1
2
Press ANGLE repeatedly to select your desired angle.
Changing the On-Screen Display
DVD-V
Control Levels
ALL
All parental lock is cancelled.
Level 8
You can check information about the current
disc by pressing DISPLAY/STATUS/EXIT on the remote
control.
Press DISPLAY/STATUS/EXIT during playback to show current
Chapter.
DVD software of any grade (adult/general/children) can be
played back.
Levels 7 to 2
Only DVD software intended for general use and children can
be played back.
1
Level 1
a The elapsed and remaining playing time of the current chap-
ter will be displayed.
Press DISPLAY/STATUS/EXIT again to show current Title.
a The elapsed and remaining playing time of the current title
will be displayed.
Press DISPLAY/STATUS/EXIT the third time.
a The BIT RATE, layer number (if available) and the current
repeat setting will be displayed.
Press DISPLAY/STATUS/EXIT the fourth time to remove the
display.
Only DVD software intended for children can be played back,
with those intended for adult and general use prohibited.
2
3
4
VCD
CD
Marker Setup Screen
Use markers to memorise your favourite places on a disc.
DVD-V
1
Press SEARCH/INDEX
ing playback.
3four times (CD/VCD: three times) dur-
•
The display screen and Markers will appear on the TV screen.
2
3
Press s or B to select 1, 2, 3, 4, 5, 6, 7, 8, 9, or 10 and ensure that
“-- -- : --” appears in the display.
VCD
CD
When reaches the desired point, press OK.
• The Title or Track and elapsed playing time will appear in the
TV screen.
To return to the Marker later, press SEARCH/INDEX 3four
times (CD/VCD: three times) during playback and s or B to
choose the desired marker, then press OK.
Notes:
1
2
3
Press DISPLAY/STATUS/EXIT during playback, the current
Track will be displayed on the TV screen.
a The elapsed and remaining playing time of the current total
track will be displayed.
Press DISPLAY/STATUS/EXIT again to show current Total
Track.
a The elapsed and remaining playing time of the current total
track will be displayed.
Press DISPLAY/STATUS/EXIT the third time to remove the dis-
play.
4
5
-
-
-
Opening the disc tray or turning off the power or select
AC at step 2 and press OK will erase all Markers.
To clear a marker, using s or B, position the cursor on
to the marker number to be cleared and press CLEAR.
You can mark up to 10 points.
Press SEARCH/INDEX 3or RETURN to exit.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 20
DVD Setup
Audio Setting
Speaker Balance
Choose the appropriate Audio settings for your equipment as it
only affect during the playback of DVD discs of the DVD sys-
tem.
Press SYSTEM MENU/PROG in STOP mode.
Press B to select CUSTOM, then press OK.
• CUSTOM mode will appear.
Press s or B to select AUDIO, then OK to confirm.
Press K or L to select the below items, then press OK.
DRC (Dynamic Range Control) :
You can test the volume balance of each speaker with this pro-
cedure.
Press DVD to put the DVD system in DVD mode.
• The red DVD light will be on the front of the DVD system.
Press STOP C to stop Disc playback if necessary.
Press SYSTEM MENU/PROG.
• The QUICK SETUP screen will appear.
Press B to select CUSTOM at the top of the menu, then press
OK.
1
1
2
2
3
3
4
To compress the range of sound volume.
The default setting is OFF.
• This menu will appear.
Press B to select AUDIO at the top of
the menu, then press OK.
Press p to select 5.1CH, then press
OK.
Press p to select BALANCE, then
press OK.
TEST will be selected. Press OK.
• The test sound will come from each speaker (in the order
indicated in the menu) so you can check the volume of each
speaker.
4
5
6
7
DOLBY DIGITAL :
Set to ON when the player is connect-
ed to Dolby Digital Decoder.
QUICK
AUDIO
AUDIO
DRC
OFF
ON
DRC
OFF
ON
DOLBY DIGITAL
DOLBY DIGITAL
DOWN SAMPLING ON
DOWN SAMPLING ON
MPEG
5.1CH
OFF
MPEG
5.1CH
OFF
(ON : Output by Dolby Digital)
(OFF : Convert the Dolby Digital to PCM)
The default setting is ON.
DOWN SAMPLING :
Set to ON when outputting in 48kHz.
The default setting is ON.
8
9
Press OK to stop the test.
Press o or p to select the speaker for which you want to
adjust the volume, then press OK.
When playing disc with copyright Protection
• If you select OFF, copyright protection will be activated and
sound will be down sampled at 48kHz.
MPEG :
Set to ON when the player is connected MPEG Decoder.
(ON: Output by MPEG)
(OFF: Convert the MPEG to PCM)
• The default setting is OFF.
Press SYSTEM MENU/PROG to exit.
•You will hear the test sound from that speaker.
10 Press o or p to adjust the volume of the selected speaker,
then press OK.
• The BALANCE menu will reappear, showing the value you
selected for that speaker.The available volume range is -6 dB
to +6 dB. Press o or p to see all the available dB values.
11 Press SYSTEM MENU/PROG to remove the menu.
Note:
5
- You cannot hear the test sound from the Subwoofer.
DelayTime
Set the delay time for the Center and Rear (Surround) speakers
to suit your listening position. If you usually sit closer to the
Center speaker than the Front speakers, increase the Center
delay time to improve the Surround Sound effect. If you plan to
sit closer to the Rear speakers than the Front speakers,
increase the Rear delay time.
Press DVD to put the DVD system in DVD mode.
•The red DVD light will be on the front of the DVD system.
Press STOP C to stop Disc playback if necessary.
Press SYSTEM MENU/PROG.
• The QUICK SETUP screen will appear.
Press B to select CUSTOM at the top of the menu, then press
OK.
• This menu will appear.
Press B to select AUDIO at the top of
DVD-V
Language Setting
Language options are not available with some discs.
1
2
Press SYSTEM MENU/PROG in STOP mode.
Press B to select CUSTOM, then press OK.
• CUSTOM mode will appear.
Press s or B to select LANGUAGE, then OK to confirm.
Press K or L to select the below items, then press OK.
3
4
1
AUDIO :
Sets the audio language.
SUBTITLE :
Sets the subtitle language.
DISC MENU :
2
3
Sets the language for DVD Menu.
PLAYER MENU :
QUICK
4
5
6
7
8
Sets the language for the On-Screen display.
Press K or L to select a setting, then press OK.
• If OTHER is selected in the AUDIO, SUBTITLE or DISC
MENU screen, press four-digit number to enter the code for
the desired language. (Refer to the language code list on page
21).
the menu, then press OK.
Press p to select 5.1CH, then press
OK.
AUDIO
5
6
DRC
OFF
ON
DOLBY DIGITAL
DOWN SAMPLING ON
MPEG
5.1CH
OFF
DELAY TIME will be selected. Press
OK.
Press o or p to select CENTER or SURROUND (for the
REAR speakers), then press OK.
Press o or p to select a delay time in milliseconds, then press
OK.
• Only the languages supported by the disc can be selected.
Press SYSTEM MENU/PROG to exit.
Note:
- Language Setting for Audio and Subtitle is not available
with some discs.Then use AUDIO and SUBTITLE. Details
are on pages 18-19.
•The default setting for the CENTER Delay time is 0 ms.The
default setting for the SURROUND (rear) Delay time is 5 ms.
Press SYSTEM MENU/PROG to remove the menu.
9
20
Download from Www.Somanuals.com. All Manuals Search And Download.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 21
DVD Setup
DVD-V
Display Setting
Use markers to memorise your favourite places on a disc.
1
2
Press SYSTEM MENU/PROG in STOP mode.
Press B to select CUSTOM, then press OK.
• CUSTOM mode will appear.
3
4
Press s or B to select DISPLAY, then OK to confirm.
Press K or L to select the below items, then press OK.
TV ASPECT :
QUICK
Press K or L for an item selection,
then press OK.
DISPLAY
TV ASPECT
4:3 LETTER BOX
ON
Select 4:3 LETTER BOX for a black
bars appears on top and bottom of
the screen.
ANGLE ICON
AUTO POWER OFF ON
Select 4:3 PAN & SCAN for a full height picture with both sides
trimmed.
Select 16:9 WIDE if a wide-screen TV is connected to the DVD
system.
The default setting is 4:3 LETTER BOX.
ANGLE ICON :
Press OK repeatedly to turn Angle icon ON or OFF.
The default setting is ON.
AUTO POWER OFF :
Press OK repeatedly to turn Auto Power off ON or OFF.
The default setting is ON and it will turn the DVD system to off
automatically after 35 minutes of no use.
Press SYSTEM MENU/PROG to exit.
Notes:
5
- Be sure to press SYSTEM MENU/PROG, or the setting
will not work.
- You can also choose the item by pressing the numbers.
Language
Code Language
Code Language
Code Language
Code
A-B
French [FRE]
Frisian
Galician
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
Siswat
Slovak
6565
6557
6558
6561
5165
6567
6569
6568
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
Slovenian
Somali
Spanish [SPA]
Sundanese
Swahili
Swedish [SWE]
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
Hebrew
Hindi
Nepali
Norwegian [NOR] 6061
Basque
Hungarian [HUN]
I-K
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
Irish [IRI]
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
O-R
Bengali;Bangla
Bhutani
Occitan
Oriya
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
6149
6164
6159
6247
6265
5247
6258
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
Polish
Portuguese [POR] 6266
C-E
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
S
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
6367
6459
6461
6467
Cambodian
Catalan
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
U-Z
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
Chinese [CHI]
Corsican
Croatian
Czech
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
Korean [KOR]
Kurdish
L-N
Laothian
5861
5847
5868
5860
5866
F-H
Latin
Latvian;Lettish
Lingala
Faroese
Fiji
5261
5256
5255
Sindhi
Singhalese
Finnish [FIN]
Lithuanian
21
Download from Www.Somanuals.com. All Manuals Search And Download.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 22
FM/MW Radio
Selecting Radio Station
Preset Radio Stations
1
Press TUNER to select Tuner mode.
Automatic Presetting
You can store up to 40 preset radio stations automatically by
following these steps.
Press TUNER to select Tuner mode.The red TUNER light will
appear on the front of the System.
Press and hold SYSTEM MENU/PROG until AUTO appears on
the System’s display panel, then release SYSTEM MENU/PROG.
The System will start scanning for stations. FM stations will be
set first, followed by MW stations.The System will store the
first 40 stations found.When programming is finished, the last
preset station will be tuned.
Or, you can press SYSTEM MENU/PROG or STOP C to stop
presetting stations.The radio stations scanned so far will be
stored.The last stored station will be tuned.
Note:
•The red TUNER light will appear on the front of the System.
The current radio frequency (station number) will appear on
the display panel.
1
2
2
3
Press AUDIO/BAND to select FM or MW.
Press s or B to select a preset radio station.
You also can select a preset radio station by pressing the
Number buttons.
•The preset number will appear in the display panel to the left
of the station’s frequency.When choosing preset stations 10
and above, enter both digits within two seconds to ensure you
enter the complete number.
3
4
Press SKIP/P+ i or SKIP/P– j to change the radio fre-
quency by one-tenth.
• For example, to go from 100.1 to 100.2, press SKIP/P+ i.
Use these buttons to fine-tune the station you want.
Or, to search for the next available station, press and hold
SKIP/P+ i or SKIP/P– j for one second, then release.
SEARCH will appear on the display panel when you release
the button.When a station with sufficient signal strength is
found, the station will be tuned and searching will stop.You
can press and hold SKIP/P– j to search backward to the
last available station.
- If a radio station has been stored in one of the presets, it
will not be stored again under another preset number
during Automatic Presetting.
Manual Presetting
If Automatic Presetting does not memorize all the stations you
want, you can preset individual stations manually.
Press SKIP/P+ i or SKIP/P– j to select the station you
want to designate as a preset station.
Press SYSTEM MENU/PROG.The next available preset number
and the station’s frequency will blink in the display panel.To
store the station under a different preset number, press { or
B to choose a preset number.
If Prog ... FULL appears before the station’s frequency starts
blinking, there are already 40 presets. Press { or B to choose
a preset that you want to replace with the new station you are
presetting now.
1
2
Note:
- If the sound is distorted during MW reception, press
o /p on the remote to reduce the noise.This is effective
only for the current MW station.This does not work for
every situation.There may be interference from other
electrical appliances or weak MW signals.
3
Within 20 seconds, press SYSTEM MENU/PROG to store the
radio station under the designated preset number. (After 20
seconds, the Tuner will exit presetting mode. If you’ve made a
mistake, wait 20 seconds for the frequency and preset number
to stop flashing, then try again.)
Note:
-To erase a preset, press B or { to select the preset sta-
tion you want to delete.Then, press and hold STOP C on
the remote until PRESET . . . DELETED appears on the
System’s display panel.The preset numbers of all other
radio stations with higher numbers will decrease by one.
Maintenance
Cleaning the Cabinet
• Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abra-
sives.
Cleaning Discs
• When a disc becomes dirty, clean it with a cleaning cloth.Wipe the disc from the centre out. Do not wipe in a circular motion.
• Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray intended for analogue records.
Cleaning the disc lens
• After prolonged use, dirt or dust may accumulate at the disc lens.To ensure good playback quality, clean the disc lens with Philips CD
Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with the cleaner.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 23
Specifications
VCRVideo Heads
20 Hz to 44 kHz (surround off)
OperatingTemperature
Four heads - Hi-Fi
(sample rate: 96 kHz)
5°C to 40°C
Audio CD: 20 Hz to 20 kHz
Antenna
Relative Humidity
VHF/UHF - 75 ohm external antenna terminal
Signal-to-Noise Ratio
Audio CD: 120 dB (JEITA:
Japan Electronics and Information Technology
Industries Association)
30% to 80%
RF Output Signal
Channel 22 to 69
75 ohms unbalanced
Dimensions (w x h x d)
Receiver (System):
43.5 x 9.9 x 39.2 cm
Dynamic Range
DVD (linear sound): 99 dB
Audio CD: 99 dB (JEITA)
DVD Color System
PAL
Front Speakers:
9.4 x 15.5 x 8.9 cm
Amplifier
Rear Speakers:
9.4 x 15.5 x 8.9 cm
Total Distortion Factor
Audio CD: 0.003% (JEITA)
DVD: 0.003%
Output power (rms, 4 ohms, 1 kHz, 10% Total
Harmonic Distortion) 360W total
- Front 75W/channel
Center Speaker:
43.5 x 7.2 x 6.4 cm
- Center 75W
- Rear (Surround) 75W/channel
- Subwoofer 75W
Wow and Flutter
Below the measurement limitation
( 0.001% W PEAK) (JEITA)
Subwoofer:
19.6 x 39.1 x 43.2 cm
Weight
FTC(Federal Trade Commission)
(4 ohms, 120 Hz to 12.5 kHz,
10 % Total Harmonic Distortion)
2 X 60W
Power Requirement
7.8 kg.
220–240V AC, 50 Hz
Power Consumption
Power on: 50 W
Power off (standby): 5 W
NOTE: Designs and specifications are subject to
change without notice.
Frequency Response
DVD (linear sound):
20 Hz to 22 kHz
(WhenCLOCK DISPLAY set toOFF.)
(sample rate: 48 kHz)
Troubleshooting
Problem
Solution
No power
No picture
–
–
–
–
–
–
Check if the AC power cord is properly connected.
Check if the TV is switched on.
Check the video connection.
Sometimes a small amount of picture distortion may appear.This is not a malfunction.
Connect the DVD system directly to the TV.
Make sure the disc is compatible with the DVD system.
Distorted picture
Completely distorted picture or
black/white picture with DVD
No sound or distorted sound
– Adjust the volume.
– Check that the speakers are connected correctly.
No audio at digital output
– Check the digital connections.
– Check if the audio format of the selected audio language matches your receiver capabilities.
– Use a DIGITAL AUDIO OUT jack when outputting the DTS audio.
– Check that the SCART cable is connected to the correct device (See Connecting to a TV)
No DTS audio at analog output
No sound and picture
Picture freezes momentarily during
playback
– Check the disc for fingerprints/scratches and clean with a soft cloth wiping from centre
edge.
– This may happen when you use the disc recorded in the non-seamless manner.This is not a
malfunction.
Disc can’t be played
– Ensure the disc label is facing up.
– Check if the disc is defective by trying another disc.
– Reset the unit by switching the DVD system off, then on again.
No return to start-up screen when disc is
removed
The System does not respond to the
remote control
– Aim the remote control directly at the sensor on the front of the System.
– Reduce the distance to the System.
– Replace the batteries in the remote control.
– Re-insert the batteries with their polarities (+/– signs) as indicated.
– To completely reset the System, unplug the AC cord from the AC outlet for 5-10 seconds.
Buttons do not work or the System stops
responding
The System does not respond to some operat-
– Operations may not be permitted by the disc.
Refer to the instructions of the disc.
– Use a commonly available cleaning CD/DVD to clean the lens before sending the DVD sys-
tem for repair.
ing commands during playback.
The DVD system cannot read CDs/DVDs
The System switches from DVD mode toVCR
mode after 35 minutes
–
Playback will stop for more than 35 minutes and no button is pressed.
TheVCR do not record aTV program
–
–
–
–
–
–
–
Make sure the tape has a record tab.
Make sure the System is inVCR position.
Check the TV and the System channel are similar.
Make sure the recording start and stop times are set correctly.
Make sure the tape has a record tab.
Make sure the clock is set.
The System may not perform or continue a timer recording if the power fails for more than
1 minute.
The System does not perform a timer
The motor (cylinder) rotates even when tape
playback is stopped
You cannot insert a tape
–
To enable quick play mechanism, the cylinder will rotate for about five minutes.This is nor-
mal.
Insert a tape, window side up with the record tab facing you.
Gently push on the center of the tape when putting into the System.
Make sure the power plug is completely connected to a power outlet.
Make sure the tape has a record tab.
–
–
–
–
You cannot remove a tape
The System ejects the tape when you press REC
orTIMER SET for a timer recording.
Radio reception is poor.
–
–
If the signal is too weak, adjust the antenna or connect an external antenna for better
reception.
Increase the distance between the System and your other electronics equipment.
If you are unable to remedy a problem by following these hints, consult your dealer or service centre (HOTLINE).
23
Download from Www.Somanuals.com. All Manuals Search And Download.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 24
PHILIPS NORGE AS
Sandstuveien 70,
PO Box 1, Manglerud
N-0612 Oslo
PHILIPS
Österreichische Philips Industrie
GmbH
Triesterstrasse 64
1101 Wien
PHILIPS PORTUGUESA, S.A.
Consumer Information Center
Rua Dr.António Loureiro Borge, nr.5
Arquiparque, Miraflores
P-2795 L-A-VEHLA
NORWAY
Phone: 2274 8250
AUSTRIA
PORTUGAL
Tel: 0810 001 203
Phone: 021-4163063
OY PHILIPS AB
Sinikalliontie 3,
02630 Espo
PHILIPS INFO CENTER
Alexanderstrasse 1
20099 Hamburg
PHILIPS CE,The Philips Centre,
420 - 430 London Road,
Croydon, Surrey
Helsinki
FINLAND
GERMANY
CR9 3QR
puh. 09 615 80 250
Tel: 0180-53 56 767
UNITED KINGDOM
Phone: 0208-665-6350
PHILIPS KUNDTJÄNST
Kollbygatan 7,
Akalla,
16485 Stockholm
SWEDEN
SERVICE CONSOMMATEURS
PHILIPS
BP 0101
75622 Paris Cédex 13
FRANCE
CONSUMER SERVICES
Prags Boulevard 80. PO Box 1919,
DK-2300 Copenhagen S
DANMARK
Phone: 08-598 52 250
Phone: 0825-889 789
TIf: 32 88 32 00
PHILIPS POLSKA
AL. Jerozolimskie 195B
02-222 Warszawa
POLSKA
PHILIPS ELECTRONICS
IRELAND LIMITED
Consumer Information Center
Newstead, Clonskeagh
DUBLIN 14
PHILIPS REPRESENTATION
OFFICE
Ul. Usacheva 35a
119048 MOSCOW
RUSSIA
Tel.: (022)-571-0-571
Phone: 01-7640292
Phone: 095-937 9300
PHILIPS SERVICE
V Mezihori 2
180 00 Prage
CZECH REPUBLIC
Phone: (02)-3309 9240
PHILIPS CONSUMER
ELECTRONICS
Servizio Consumatori
Via Casati 23
PHILIPS INFO CENTER
Fegistrasse 5
8957 Spreitenbach
SUISSE
20052 Monza - Milano
ITALY
Phone: 800 820026
Tel.: 0844-800 544
PHILIPS Iberia, S.A.
C/MartinezVillergas, 49
28027 MADRID
PHILIPS CUSTOMER CARE
CENTER
SPAIN
Phone: 902-11 33 84
PHILIPS MÁRKASZERVIZ
Kinizsi U 30 - 36
Budapest 1092
HUNGARY
Phone: (01)-2164428
Twee Stationsstraat 80/
80 Rue des Deux Gares
1070 BURSSEL/BRUXELLES
BELGIUM (for BENELUX)
Tel: 070-222303
Meet Philips at the Internet
The products and services described herein are not necessarily
available in all countries
Due to continuous product improvements this document is
subject to change without notice.
Printed in China
0VMN03813 / E9015ED*****
Download from Www.Somanuals.com. All Manuals Search And Download.
|