Philips DVD Recorder HDRW720 69 User Manual

Quick install guide  
Welcome to the growing family of owners of PHILIPS equipment.  
Thank you for buying a HDRW 720/69. The following pages contain  
explanations of the main features that will help you better understand  
how the HDRW 720/69 works.  
You will find step-by-step descriptions of each function in the respective  
chapter of the User manual.  
Features  
The HDRW 720 is a DVD recorder that can store TV-shows on a built-in hard disk (HDD).  
Moreover, it is a DVD player that can play back DVDs, audio and (s-)video CDs, and MP3 CDs. You can play back and edit the stored TV shows  
(or camcorder recordings), and save (archive) these on DVD+RW/+R media for later viewing.  
But your HDRW 720 is more than just an ordinary DVD recorder with a built-in hard disk.  
From now on, it's better to use your TV set just as a monitor and tune to the various TV channels from your DVD recorder, taking advantage of  
features like FlexTime, Instant Replay, or the abitity to pause live TV.  
FlexTime:  
With FlexTime, you can watch or rewind a TV show while it is being recorded.  
You don't have to wait until the end of the recording before starting playback.  
Instant Replay:  
You can repeat a scene of a live TV show at the touch of a button ( JUMP BACK ), as often as you like.  
Pause Live TV  
You can pause a live TV show by pressing PAUSE 9 to, say, answer a phone call, while the recording continues. By pressing PLAY G , you  
can resume playback of the show at the scene it was interrupted.  
Time Shift Buffer  
The above features are available because the HDRW 720 uses a so-called Time Shift Buffer.  
As soon as you turn on your DVD recorder, it starts recording from the current TV channel into the  
Time Shift Buffer. The DVD recorder stores all the TV shows you watched since you turned on the  
recorder. If you watched a TV show for more than 60 seconds, the recorder will insert a marker. If  
information is already available from the GUIDE Plus+® system, the recorder will store the title and  
mark the beginning of the TV show.  
Note:When you are recording from a cable box through the external input jacks, the title and start/end  
information will not be available.  
If the Time Shift Buffer is full (the default setting is 3 hours) the recorder will delete the oldest  
recording to make room for new recordings. You can mark TV shows or parts of these to be recorded permanently on the HDD while the other  
contents of the Time Shift Buffer will be deleted.  
The Time Shift Buffer can be best compared to a conveyor belt running from right to left. A TV show resembles a package on this conveyor belt. If  
you change the programme number or the GUIDE Plus+® system detects the start of a TV show, a new package will be placed on the conveyor  
belt. You can adjust the time a package will remain on the conveyor belt from 1 to 6 hours (the default setting is 3 hours).  
As long as the packages are still on the conveyor belt, you can mark them red ( REC/OTR n ) or remove the marker ( RED function button).  
You can only mark the package that's directly in front of you.  
At the end of the conveyor belt (the preset time has expired), the recorder will decide whether a package will be stored (marked red) or  
destroyed (unmarked). Only the packages that are marked red will be stored.  
If you delete the Time Shift Buffer, the recorder will immediately remove all packages from the belt, storing only those you marked red.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick install guide  
Navigation in the Time Shift Buffer  
You can move to any position within the Time Shift Buffer and watch the recording that was stored at that time.The indicator (yellow rectangle on  
the time bar) shows the playback position in the Time Shift Buffer. You can move this indicator using the C , D buttons. If the playback position  
is as far on the right-hand side as it can get, you are watching the current (live) picture of the TV channel you are tuned in. In the header of the  
Time Shift Buffer, you will see an aerial symbol (contrary to the HDD symbol that appears when playing back from the HDD).  
The following is a short overview of the basic buttons for navigation in the Time Shift Buffer:  
N , JUMP BACK , D  
When you reach the left end of the time bar, the recorder will switch to normal playback speed.  
O , JUMP FWD , C  
When you reach the right end of the time bar, you are watching the current TV programme. It is not possible to move further to the right. In  
order to do so, the recorder would have to anticipate the future programme. You can use O to 'catch up' with the current TV programme.  
PAUSE 9 If you stopped playback, the indicator will remain at that position until the preset time of the Time Shift Buffer has reached that  
position (the indicator reaches the left end of the time bar). When it reaches the end, the DVD recorder will automatically switch to playback.  
PLAY G Playback at normal speed. The limits of the Time Shift Buffer cannot be exceeded.  
Recordings using the Time Shift Buffer  
Recordings are always stored in the Time Shift Buffer first.  
The following recording options are available:  
Programmed recordings (TIMER) that will be carried out automatically at a predefined date/time  
Direct recording of the current, live TV programme.  
Marking of TV shows that have already been stored in the Time Shift Buffer.  
You can mark recordings in the Time Shift Buffer to store them on the HDD instead of having them discarded when the Time shift Buffer period  
expires. When a TV show is marked, a red marker appears on the time bar of the Time Shift Buffer. This marker indicates the recording. You  
don't need to do anything else.  
The DVD recorder automatically transfers a show to the HDD when:  
the preset Time Shift Buffer period expires (the default setting is 3 hours).  
the Time Shift Buffer is deleted ('Flush Buffer'function( SYSTEM MENU button, 'Set up'menu )).  
you turn off the DVD recorder with STANDBY m .  
you switch to camera mode using CAM (switch back with the same button).  
date/time or channel settings have changed (menu is called up).  
In the case of programmed recordings, the marker is set automatically. After that, the recording is also automatically stored on the HDD. When a  
red marker has been set, you do not need to do anything else. Even if you turn off the recorder with STANDBY m , the recording will be stored  
first before the DVD recorder automatically switches off.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick install guide  
Programming a recording  
You have the following options for programming a recording:  
The G9Code® system:  
By entering the G-Code programming number, you automatically set start/stop time, date, and programme number  
Manual programming.  
Manually started recordings  
To record the current TV show, press REC/OTR n .  
If you want to stop the recording, press the STOP h button. Select 'Yes' using D and confirm with OK .  
If you want to mark a TV programme in the Time Shift Buffer, move the button on the time bar using C , D within the desired programme and  
press REC/OTR n . To remove the marker, press the RED function button. The time bar must be visible. ( INFO button)  
Recording mode  
Recordings on the HDD will be carried out in an adjustable recording quality, the so-called recording mode. The higher the quality, the greater the  
HDD space required. The recording quality is indicated as M1, M2, M2x, M3, M4, M6, and M8. The number indicates the number of hours that will  
fit on a single-layer, 4.7GB DVD+RW or DVD+R. This means that you can store only 1 hour of 'M1' recordings on a DVD+RW/+R, while 8 hours  
of 'M8' recordings will fit on the same disc.  
This is particularly important when you want to copy recordings from the HDD onto a DVD+RW/+R. The quality of recordings on the HDD  
cannot be changed at a later stage.  
For example:  
A 3-hour movie that was stored on the HDD in recording quality 'M1' will not fit on a DVD+RW/+R (M1=1 hour on a DVD+RW/+R). Only 1  
hour of this movie can be copied onto a DVD+RW/+R. If you recorded the same movie in recording mode M3, the entire movie would fit on a  
DVD+RW/+R. (M3=3 hours on a DVD+RW/+R).  
A few closing instructions  
If you have any problems operating the device:  
1) Read the items in the User Manual in the section 'Before you call an engineer'  
2) Visit the Internet site http://www.philips.com/support to get some online help,  
3) Call the customer support service. You will find the telephone numbers at the back of the User manual.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick install guide  
Connecting to the TV  
Initial installation  
1 Switch off your TV set.  
1 Press STANDBY-ON m on the front of the DVD-recorder  
P 'PHILIPS' and then 'IS TV ON?' will appear on the display.  
2 Remove the aerial cable plug from your TV set. Insert it into the  
2 If necessary, select the programme number for the input socket at  
ANTENNA IN socket at the back of the DVD recorder.  
the TV set.  
3 Insert one end of the supplied aerial cable into the TV  
OUT socket at the back of the DVD recorder and the other end  
into the aerial input socket at the back of the TV set.  
P The initial installation menu appears on the screen.  
Virgin mode  
4 Connect sockets S-VIDEO OUT (Y/C) or VIDEO OUT  
(CVBS) and AUDIO OUT L/R with the corresponding sockets  
of your TV set.  
Menu Language  
English  
Español  
Français  
Italiano  
Deutsch  
Press OK to continue  
3 Select your favourite setting using B or A .  
Confirm with OK .  
4 Proceed in the same way with the further menus: 'Audio  
Language', 'Subtitle', 'TV shape', 'Country' .  
P The Automatic channel search starts after the confirmation of  
the message 'If you have connected the antenna - press  
OK' using OK .  
Connecting to the mains  
P After all channels have been found, the menu for Time/Date  
setting appears.  
Always check if the local mains voltage matches the voltage range  
printed on the type plate at the back or bottom of the DVD-recorder.  
If not consult your dealer or the customer support from your country.  
Check the data displayed and change them if necessary  
5 To end, press SYSTEM MENU .  
1 Switch on the TV set.  
2 Insert one end of the supplied mains cable into the mains socket  
4MAINS at the back of the DVD recorder and the other end  
into the wall socket.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick install guide  
a 'Please enter programme number' appears on the  
Programming recordings with the  
G9Code® System  
screen  
b This message appears when the TV channel has not been assigned  
yet.  
Enter the program number and confirm with OK .  
G-Code  
Manual  
Home  
Please enter the G-Code programming number and  
press OK to confirm.  
1 2 3 4 5 = = = =  
1 Switch on the TV set. If required, select the programme number  
Grid  
/Record  
Search  
Schedule Info  
Freq. Timing  
Once  
for the DVD recorder.  
21-Oct 20:00 21:30 BBC1  
0
2 Press TIMER s on the remote control.  
P The 'Schedule' screen will appear  
3 Press the red function button ('G-Code').  
G-Code  
Manual  
Home  
Please enter the G-Code programming number and  
press OK to confirm.  
= = = = = = = = =  
Grid  
Search  
Schedule Info  
No programmes  
P The decoded data appears after confirmation.  
Once  
0
You can use the colour buttons to make the following settings.  
First, the right tile must be highlighted ( C button). Check the  
functions (descriptions) in the corresponding colour field  
before pressing a button.  
Deactivate 'VPS/PDC'!  
If 'VPS/PDC' appears instead of the time, press the yellow function  
button until the 'V/P' sign disappears.  
Setting up repeat recordings  
4 Enter the entire G-Code number. This number is up to 9 digits  
long and can be found next to the start time of the TV programme  
in your TV listings magazine.  
You can choose from the following settings with the green action button:  
'Frequency': 'Once': single recordings  
'M-F': Repeated daily recordings (Monday to Friday).  
'Mon': Repeated weekly recordings (every week on the  
same day e.g. Monday).  
e.g.: 5-312-4 or 5,312 4  
Enter 53124 for the G-Code-number.  
Use therefore the number buttons 0..9 on the remote control.  
If you make a mistake you can press D or the green action button  
to go back a position.  
6 If all information is correct, press the OK button. The data is  
stored.  
5 Confirm with OK .  
7 To end, press TIMER s .  
If one or more recordings have been programmed 'TIMER' will light up  
on the display.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick install guide  
Buttons in the 'Time Shift Buffer'  
Recording on the HDD  
1 Press INFO to display the bar of the time shift buffer on the  
screen.  
2 The following buttons are available:  
O
N , O , PLAY G , PAUSE 9 , D , C , JUMP  
FWD , JUMP BACK for navigation in the time bar.  
O
RETURN  
You can jump back to the previous scene of the time shift  
buffer or to playback from the HDD.  
If you press this button again, you can switch to the picture of  
the actual running TV show.  
As soon as you turn on the DVD recorder, the currently selected TV  
channel on the DVD-Recorder is recorded in a temporary storage  
(Time shift Buffer).  
O
O
TUNER  
To switch to the actual TV show (live) of the selected TV  
channel.  
Therefore, you can jump back to the currently selected TV programme  
using JUMP BACK and watch a scene again.  
Moreover, you can use all playback features such as still picture, slow  
motion, search by time, search with N , O even with recordings  
that are still in the time shift buffer.  
T/C  
Switching between title/chapter for selection using N ,  
O . The top screen line displays either 'TITLE' for selecting  
titles or 'CHAPTER' for selecting chapters  
In the meantime, the recording continues.  
Recordings in the time shift buffer will be automatically deleted (factory  
setting 3 hours).  
Only recordings marked in the Time shift Buffer will be stored on the  
the built-in HDD  
O
REC/OTR n :  
- To start a recording that will be stored on the HDD.  
- To mark a title that will be stored on the HDD.  
- Hold button down to start the recording from the actual  
position.  
O RED function button:  
Symbols in the 'Time Shift Buffer'  
Following symbols can appear in the info bar at the top of the screen in  
the 'Time Shift Buffer'. With the INFO button on the remote control  
you can also call up this infobar.  
- To cancel the marked recording that was set with the  
REC/OTR n button.  
- Hold button down to stop the recording at the actual  
position.  
O YELLOW function button: ('OVERVIEW')  
Left area  
To display an overview of all content of the time shift buffer.  
Information about the input signal were displayed here:  
'C' Actual TV show (live picture) from the selected TV channel  
O BLUE function button:('MORE INFO'):  
To display any additional information for the actual TV show  
transmitted by the GUIDE Plus+® system.  
'P01' Programme/Channel number of the selected TV channel  
'D' Playback from the HDD  
Right area  
Information about the current operating status were displayed here:  
'B 16:03:02' Actual (live) picture of the selected TV-channel  
( TUNER button)  
'J PLAY' Playback from the HDD  
'M PAUSE' Still picture  
'H 1/2X' Slow motion forwards  
'G -1/2X' Slow motion backwards  
'L 4X' Fast motion forwards  
'K -4X' Fast motion backwards  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick install guide  
Ending a recording manually(immediately)  
Manual recordings  
1 If necessary, switch the TV set to the programme number (input  
socket) of the DVD recorder.  
When you switch on the DVD recorder, the currently selected TV  
programme will be recorded will be recorded in the Time Shift Buffer.  
In order to store a recording on the HDD, you must mark it red in the  
Time Shift Buffer (time bar) before the Time Shift Buffer is deleted.  
2 Press STOP h  
P A message appears on the screen, asking whether you really  
want to end the recording.  
How can I delete the Time Shift Buffer?  
- Switch off the recorder using STANDBY m  
O If you want to end the recording, select 'Yes' with D and  
confirm with OK .  
- Select the 'Flush Buffer' feature ( SYSTEM MENU button, 'Set  
up' menu)  
O If you do not want to end the recording, confirm 'No' using  
- The preset time of the Time Shift Buffer (1-6 hours) has expired  
OK .  
STOP h will always end only the current recording (current time).  
If you want to end a recording earlier than scheduled (jump back in the  
Time Shift Buffer using D ), proceed as follows:  
Starting a recording  
- Press INFO to display the time bar.  
1 In case the time bar of the Time Shift Buffer is not visible on the  
- Hold down the red function button.  
screen, press INFO on the remote control.  
2 Press REC/OTR n .  
3 To permanently store the recording on the hard disk, you have to  
P The red light around the record button n on the front will  
erase the Time Shift Buffer. The following options are available:  
switch on.  
O the preset Time Shift Buffer period expires (the default setting  
is 3 hours)  
P '1 Programm +30' will appear on the screen on the right end  
of the time bar. This indicates that the recording will  
automatically end after 30 minutes. Press  
O the Time Shift Buffer is manually erased ('Flush  
Buffer'function( SYSTEM MENU button, 'Set up'menu ))  
REC/OTR n several times to prolong the switch-off time.  
O you turn off the DVD recorder with STANDBY m  
Recording the previous TV show  
If the DVD recorded has been on for some time, the Time Shift Buffer  
already contains recordings. You can select those recordings (TV shows)  
that you want to store on the HDD.  
O you switch to camera mode using CAM (switch back with the  
same function button).  
- Select the beginning of the oldest recording with D or C and hold  
down REC/OTR n to mark the recording from the beginning.  
- Select the end of the most recent recording using C or D and hold  
down the RED function button to cut off the end.  
You can remove the marker using the RED function button.  
Starting a recording from the current position  
(from here onward)  
You can also start a recording immediately, regardless of the  
recordings in the Time Shift Buffer.  
1 Hold down REC/OTR n until the red light on the record button  
n at the front switches on.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick install guide  
Recording from the front sockets  
Archiving (storing) titles on a  
DVD+RW/+R  
Using this function, you can store recordings via the front sockets  
directly on the HDD.  
You can choose the title of the HDD that you want to transfer on a  
DVD+RW/+R.  
You can edit these recordings on the HDD and transfer (archive) them  
later with higher speed on a DVD+RW/+R disc.  
Please observe:  
For archiving you can only use the same recording quality that was  
used for recording on the HDD. You cannot change the recording  
quality for recordings on a DVD+RW/+R.  
1 Connect the camcorder to the front sockets.  
2 Press CAM on the remote control.  
P The DVD recorder will switch to camera mode.  
1 Insert a DVD+RW/+R on which you want to store the selected  
titles.  
2 Press BROWSER HDD .  
P The media browser appears with an overview of all recordings  
on the HDD.  
3 Select the title you want to copy on the DVD+RW/+R using B ,  
A .  
O If you want to archive several titles at a time, mark the desired  
3 Select the socket to which the camcorder is connected using  
titles with SELECT .  
CHANNEL q or CHANNEL r .  
4 Start the archiving process by pressing the green function button.  
O 'CAM1'  
If this button is not visible on the screen, check if this title is available in  
the 'Time shift Buffer'. If necessary switch the DVD-Recorder off using  
STANDBY m or use the 'Flush Buffer' function (button  
SYSTEM MENU , menu 'Set up')  
For recordings from the VIDEO (CAM1) , S-VIDEO  
(CAM1) sockets.  
Switching between the two sockets is done automatically.  
O 'CAM2'  
P A message indicating the process appears both on the screen  
For recordings from the DV IN (CAM2) socket.  
and in the display.  
4 Press REC/OTR n to start the recording.  
P During and after the archiving process, you see the TV show  
of the currently selected TV channel. The buttons D , C ,  
JUMP BACK , JUMP FWD , PLAY G , PAUSE 9 are  
without function during archiving. Timer recordings will take  
place.  
5 You can stop the recording using the following buttons:  
O
PAUSE 9  
The recording will be paused. If you press the button again,  
the recording will resume.  
A new chapter is created.  
Interrupt the process  
O
STOP h  
Press the yellow function button. If necessary call up the informatoon on  
the screen using the INFO button.  
The recording will be interrupted. You can start a new  
recording by pressing REC/OTR n .  
A new title is created.  
Finalising a DVD+R  
If recordings were stored (archived) on a DVD+R you have to finalise it  
to make play back in a DVD-Player possible.  
- Press DISC MENU and then STOP h to mark the first title.  
6 Press CAM to terminate the camera operating mode.  
P The recording will be stored on the HDD as a new title.  
7 Press CAM to terminate the camera operating mode.  
- Press A to go to the 'disc info screen'  
- Press C and select then the line 'Finalise disc' using B .  
- Confirn with OK .  
P The recording will be stored on the HDD as a new title.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick install guide  
Symbols in the 'Media Browser'  
If you call up the Media Browser with the BROWSER HDD button,  
Playback from the HDD  
Each recording stored on the HDD is displayed in the media browser  
with a corresponding index picture.  
following symbols can appear in the infobar at the top of the screen:  
'P' This title was marked in the Time Shift Buffer for the storage on  
the HDD. This title can only be deleted or locked (child lock). If  
you want to make additional changes, you have to flush the time  
shift buffer. Use therefore the 'Flush Buffer' function (button  
SYSTEM MENU , menu 'Set up') or switch the DVD-Recorder  
to standby.  
1 Press BROWSER HDD on the remote control or HDD on the  
DVD recorder.  
P The Media Browser appears.  
'E' This title has been played once (has been 'watched'). If there is no  
storage capacity free on the HDD such 'watched' titles will be  
deleted automatically if the function 'Auto delete' is switched on.  
You can change these setting in the title edit menu ( EDIT button,  
blue button, EDIT button )  
Titles that were not played back, will have no symbol.  
'F' The title is protected against editing and 'Auto delete'. If the title  
2 Select the title you want using B , A on the remote control or  
is not protected, no symbol will be shown.  
DOWN , UP on the device.  
'i' Child lock is activated. The index picture is switched off. Playback  
starts only if the right PIN code was entered. If no PIN code has  
been entered or the PIN code was deleted, the PIN code is '0000'.  
You can switch a page forward or back using CHANNEL q ,  
CHANNEL r .  
3 You can choose one of the following options to start playback:  
Change the Code  
O
OK  
- Press DISC MENU and then SYSTEM MENU .  
Playback always starts at the beginning of the selected title.  
- Select the symbol ' ' using D then ' (Disc features)' with  
A
s
B and confirm using C .  
O
PLAY G  
Playback will start at the position where it was interrupted in  
the selected title( STOP h ). This also works if other titles or  
DVDs have been played in the meantime.  
- Confirm the line 'Access control' using C and enter the 4 digit  
code. Enter the code again for confirmation and end using SYSTEM  
MENU .  
In the section 'Changing the PIN code' in chapter 'Access control (Child  
Lock)' you will find further informations.  
'Q' The marked titles will be stored (archived) on a DVD+RW/+R.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick install guide  
Buttons in the 'Media Browser'  
O Delete title:  
red function button  
The tiltle (recordings) will be erased from the HDD.  
O Archive title:  
green function button  
The title will be transferred to DVD+RW/+R. If it is not  
possible to record on a DVD+RW/+R, an error message  
appears (disc not inserted,...).  
If you want to archive several titles, mark the desired titles  
with SELECT . You can unmark the title using the same  
button.  
Available functions during archiving  
- Switching between the TV channels using CHANNEL q ,  
CHANNEL r .  
- The selected TV show is recorded in the time shift buffer.  
- Timer recordings takes place  
O Lock/unlock title (child lock):  
yellow function button  
Playback starts only if the right PIN code was entered. If no  
PIN code has been entered or the PIN code was deleted, the  
PIN code is '0000'. How you change the PIN code you will  
read in the section 'Symbols in the media browser'  
O Protect/unprotect title against editing, automatic  
deletion:  
blue function button  
An error message will appear if you try to edit this title.  
Automatically deletion will take place, if your HDD will run full  
with recordings. Stored recordings will be deleted in a certain  
order. See details in the section 'Symbols in the media  
browser'  
Switch over to the actual TV channel  
during playback from a disc  
You can play back a disc, while the current TV show is still being  
recorded.  
1 To interrupt playback from a disc, press TUNER  
P You will see the TV-show from the selected TV channel on  
the DVD-recorder  
O To continue playback, from the disc press DISC MENU .  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick install guide  
The remote control  
REC/OTR n Record the current TV show on the HDD, mark recordings in the time  
shift buffer to be stored on HDD.  
Hold button down to start the recording from now. (Mark the  
recording from the beginning of the actual position in the Time Shift  
Buffer).  
STANDBY m To switch set on or off, interrupt menu function.  
A programmed recording (TIMER) or an archiving process will be  
continued until the end, and the device will then be switched off.  
CAM Switch to 'Camera mode' (recording directly on the HDD and not  
through time shift buffer).  
TV/HDD No function  
RETURN Return to previous menu on a video CD (VCD). This also works with  
some DVD discs.  
Moreover, you can jump back to the previous scene of the time shift  
buffer during playback from the HDD. You can switch to the picture of  
the actual running TV show with the TUNER button.  
EDIT Call up/Cancel the edit menu.  
Call up/Cancel the menu for editing titles during playback.  
TIMER s To make a TIMER programming with/without G-Code® system or to  
alter/clear programmed recordings.  
SELECT Select function/value.  
You can mark several titles in the media browser.  
Switch on repeat play during playback from a disc.  
You can switch to upper case characters if you enter names  
TUNER This button lets you switch to the picture of the internal tuner (TV  
channel).  
During play back from the Time Shift Buffer, you can jump to the actual  
TV show (live) of the selected TV channel.  
SYSTEM MENU Call up/Cancel the system menu.  
Depending on the operating mode from which you press this button:  
•) DVD system menu: Press DISC MENU first.  
•) HDD system menu: Press TUNER first.  
DISC MENU For displaying the DVD menu or the index screen overview.  
INFO For displaying additional information on the screen or the time shift  
buffer during playback/recording on the HDD.  
BROWSER HDD Call up/cancel the overview of HDD recordings (media browser).  
GUIDE/TV No function  
A B Cursor buttons up, down in the menus.  
Previous or next position in the time shift buffer during playback from  
HDD.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick install guide  
D C Cursor buttons left, right in the menus.  
Previous or next position during playback of a title from the HDD  
(media browser or time shift buffer). If you hold down this button you  
can faster browse through the recordings. The speed will increase  
automatically.  
OK Confirming of functions  
Starting the playback from the beginning in the 'Media Browser'.  
STOP h Stop playback /Recording  
Hold down the button to open and close the disc tray.  
PAUSE 9 If this button is pressed during playback, the DVD recorder switches to  
pause. You will see a still picture. If this button is pressed during  
recording in the 'Camera mode', the DVD recorder switches to pause  
and inserts a chapter marker.  
PLAY G Play back a recorded disc.  
CHANNEL q Next programme number  
CHANNEL r Previous programme number  
JUMP BACK To jump back a certain time period (factory setting 30 seconds) The  
setting can be changed in the settings of the HDD (button TUNER ,  
SYSTEM MENU , line 'Set up', 'Jump back')  
N Briefly press the button during playback: Previous chapter or previous  
title  
Hold down the button: Search backwards  
Hold down the button during the still picture: slow motion backwards  
In the title edit menu (button EDIT , line 'Video edit') you can jump  
to the beginning during still picture (button PAUSE 9 ). This is  
needful if you want to hide a scene at the beginning.  
O Briefly press the button during playback: Next chapter or next title  
Hold down the button: Search forwards  
Hold down the button during the still picture: slow motion forward  
In the title edit menu (button EDIT , line 'Video edit') you can jump  
to the end during still picture (button PAUSE 9 ). This is needful if  
you want to hide a scene at the end.  
JUMP FWD To jump forward a certain time period (factory setting 30 seconds) The  
setting can be changed in the settings of the HDD (button TUNER ,  
SYSTEM MENU , line 'Set up', 'Jump forward')  
0..9 For entering numbers or characters at the corresponding entry fields.  
T/C Switching between title and chapter for selection using N , O .  
If 'INFO' appears in the display, the index menu from a recorded disc  
will be shown or an introductory film will be played. In this case, this  
function is not available.  
DISC MANAGER Call up/Cancel the disc manager (DM).  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick install guide  
Colour buttons  
You can call up different functions in the menus using the following colour buttons. The functions  
will be shown in a bar at the bottom of the screen. If this bar is not visible, you can display it using  
the INFO button.  
Most of the colour buttons work only if this bar is visible.  
RED Red function button, in some screens the function of a 'clear' button  
(e.g. Disc Manager, 'Sort TV channels' menu, edit the title name,...).  
Stop recordings in the time shift buffer.  
GREEN Green function button  
YELLOW Yellow function button  
BLUE Blue function button  
Additional TV functions  
With the enclosed multicode remote control you can control the main functions of your TV set.  
To do this, you must first enter a code number that corresponds to the type/brand of your TV set.  
You will find the code numbers on the last page of the user manual. How to enter this code  
number you will read in the chapter 'Using your DVD-Recorder remote control with your TV set'in  
the user manual.  
TV VOLUME q Increase TV volume  
TV VOLUME r Reduce TV volume  
For the following functions you need to hold down the • TV button (on the left side) and then  
select the function you need with the appropriate button.  
STANDBY m Switch on/off TV set  
0..9 Number buttons 0 - 9  
CHANNEL q To select a higher programme number  
CHANNEL r To select a lower programme number  
Additional TV functions for Philips TV-sets if supported from the TV. You need to hold down the •  
TV button (on the left side).  
T/C switch Teletext (TXT) on/off  
TIMER s Clock display on the screen on/off  
RETURN To return to the previous selected TV program/ previous menu step  
SYSTEM MENU Call up the System Menu from the TV  
B , A In the menus cursor up/down  
D , C In the menus cursor left/right  
OK Confirm functions or settings  
RED ,GREEN , Colour buttons for special functions  
YELLOW, BLUE  
TUNER Switching the TV from the external sockets to the internal tuner.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Patton electronic Switch IM2RC I 100B User Manual
Peavey Stereo Amplifier CS 200X User Manual
Phase Technology Speaker CM690i User Manual
Philips Computer Monitor 107E51 User Manual
Philips Computer Monitor HW9190T User Manual
Philips Cordless Telephone DECT 221 User Manual
Philips DVD Player PDCC JH User Manual
Philips Portable CD Player AX5200 User Manual
Precision Power MP3 Player TD450 User Manual
Promise Technology Network Card 66 Pro User Manual