User Manual
6
Bedienungsanleitung
92
Download from Www.Somanuals.com. All Manuals Search And Download.
2005-09-16 2:15:10 PM
cover_dvdr5350h_17631.indd
1
CAUTION
DK
VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN AVOID
EXPOSURE TO BEAM
Advarsel: Usynlig laserstråling ved åbning
når sikkerhedsafbrydere er ude af funktion.
Undgå utsættelse for stråling.
ADVARSEL
Bemærk: Netafbryderen er sekundært
indkoblet og ofbryder ikke strømmen fra
nettet. Den indbyggede netdel er derfor
tilsluttet til lysnettet så længe netstikket
sidder i stikkontakten.
SYNLIG OG USYNLIG LASERSTRÅLING
VED ÅBNING UNDGÅ UDSÆTTELSE
FOR STRÅLING
VARNING
SYNLIG OCH OSYNLIG
LASERSTRÅLNING NÄR DENNA DEL
ÄR ÖPPNAD BETRAKTA EJ STRÅLEN
VARO!
AVATTAESSA OLET ALTTIINA
NÄKYVÄLLE JA NÄKYMÄTTÖMÄLLE
LASER SÄTEILYLLE. ÄLÄ KATSO
SÄTEESEEN
S
Klass 1 laseraparat
Varning! Om apparaten används på annat
sätt än i denna bruksanvisning specificerats,
kan användaren utsättas för osynlig
laserstrålning, som överskrider gränsen för
laserklass 1.
VORSICHT
SICHTBARE UND UNSICHTBARE
LASERSTRAHLUNG WENN
ABDECKUNG GEÖFFNET NICHT DEM
STRAHL AUSSETSEN
Observera! Stömbrytaren är sekundärt
kopplad och bryter inte strömmen från
nätet. Den inbyggda nätdelen är därför
ansluten till elnätet så länge stickproppen
sitter i vägguttaget.
ATTENTION
RAYONNEMENT LASER VISIBLE ET
INVISIBLE EN CAS D’OUVERTURE
EXPOSITION DANGEREUSE AU
FAISCEAU
SF
Luokan 1 laserlaite
Varoitus! Laitteen käyttäminen muulla kuin
tässä käyttöohjeessa mainitulla tavalla
saattaa altistaa käyttäjän
turvallisuusluokan 1 ylittävälle
näkymättömälle lasersäteilylle.
Oikeus muutoksiin varataan. Laite ei saa
olla alttiina tippu-ja roiskevedelle.
Disposal of your old product
Your product is designed and manufactured with high quality materials
and components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive 2002/96/EC.
Please inform yourself about the local separate collection system for
electrical and electronic products.
Huom. Toiminnanvalitsin on kytketty
toisiopuolelle, eikä se kytke laitetta irti
sähköverkosta. Sisäänrakennettu verkko-osa
on kytkettynä sähköverkkoon aina silloin,
kun pistoke on pistorasiassa.
Please act according to your local rules and do not dispose of your old products with
your normal household waste.The correct disposal of your old product will help
prevent potential negative consequences for the environment and human health.
Entsorgung Ihres Altgerätes (Deutsch)
Ihr Produkt ist aus hochqualitativen Materialien und Bestandteilen hergestellt,
die dem Recycling zugeführt und wiederverwertet werden können.
Falls dieses Symbol eines durchgestrichenen Müllcontainers auf Rollen auf
diesem Produkt angebracht ist, bedeutet dies, dass es von der Europäischen
Richtlinie 2002/96/EG erfasst wird.
Bitte informieren Sie sich über die örtlichen Sammelstellen für Elektroprodukte
und elektronische Geräte.
Bitte beachten Sie die lokalenVorschriften und entsorgen Sie Ihre Altgeräte nicht mit dem
normalen Haushaltsmüll. Die korrekte Entsorgung Ihres Altgerätes ist ein Beitrag zur
Vermeidung möglicher negativer Folgen für die Umwelt und die menschliche Gesundhei.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
2005-09-16 2:15:11 PM
cover_dvdr5350h_17631.indd
3
LASER
Type
Semiconductor laser
InGaAlP (DVD)
This product incorporates copyright
protection technology that is protected by
US patents and other intellectual property
rights. Use of this copyright protection
technology must be authorized by
Macrovision, and is intended for home and
other limited viewing uses only unless
otherwise authorized by Macrovision.
Reverse engineering or disassembly is
prohibited.
AIGaAs (CD)
658 nm (DVD)
790 nm (CD)
30 mW (DVD+RW write)
1.0 mW (DVD read)
1.0 mW (CD read)
84 degrees (DVD)
61 degrees (CD)
Wave length
Output Power
Beam divergence
‘CONSUMERS SHOULD NOTETHAT NOT ALL HIGH
DEFINITIONTELEVISION SETS ARE FULLY
COMPATIBLEWITHTHIS PRODUCT AND MAY CAUSE
ARTIFACTSTO BE DISPLAYED INTHE PICTURE. IN
CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDEDTHATTHE USER
SWITCHTHE CONNECTIONTOTHE ‘STANDARD
DEFINITION’ OUTPUT. IFTHERE ARE QUESTIONS
REGARDING OURTV SET COMPATIBILITYWITHTHIS
MODEL 525p AND 625p DVD PLAYER, PLEASE
U.S. Patent Numbers 4,631,603; 4,819,098;
4,907,093; 5,315,448 and 6,516,132.
CONTACT OUR CUSTOMER SERVICE CENTER.’
This product complies with the radio
interference requirements of the
European Community.
GUIDE Plus+, SHOWVIEW, VIDEO Plus+,
G-LINK are (1) registered trademarks or
trademarks of, (2) manufactured under
license from and (3) subject to various
international patents and patents applications
owned by, or licensed to, Gemstar-TV Guide
International, Inc. and/or its related affiliates.
This product complies with
the requirements of the
following directives and
guidelines: 73/23/EEC +
89/336/EEC + 93/68/EEC
GEMSTAR-TV GUIDE INTERNATIONAL,
INC. AND/OR ITS RELATED AFFILIATES
ARE NOT IN ANY WAY LIABLE FOR THE
ACCURACY OF THE PROGRAM
SCHEDULE INFORMATION PROVIDED
BY THE GUIDE PLUS+ SYSTEM. IN NO
EVENT SHALL GEMSTAR-TV GUIDE
INTERNATIONAL, INC. AND/OR ITS
RELATED AFFILIATES BE LIABLE FOR ANY
AMOUNTS REPRESENTING LOSS OF
PROFITS, LOSS OF BUSSINESS, OR
INDIRECT, SPECIAL, OR
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro-Logic” and the
double-D symbol are trademarks of Dolby
Laboratories.
CONSEQUENTIAL DAMAGES IN
CONNECTION WITH THE PROVISION
OR USE OF ANY INFORMATION,
EQUIPMENT OR SERVICES RELATING TO
THE GUIDE PLUS+ SYSTEM.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2005-09-16 2:15:12 PM
cover_dvdr5350h_17631.indd
4
Index
English------------------------------------------6
Deutsch--------------------------------------- 92
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2005-09-16 2:15:15 PM
cover_dvdr5350h_17631.indd
5
Table of Contents
General
Care and Safety Information ..........................................................................................8
Cleaning discs........................................................................................................................................................8
Hard Disk Drive (HDD) handling care..........................................................................................................8
Product Information ........................................................................................................9
Special features...................................................................................................................................................10
Product Overview
Remote Control........................................................................................................12~14
Using the remote control................................................................................................................................33
Connection
Connecting to a camcorder ....................................................................................................................22~23
GUIDE Plus+
Using the GUIDE Plus+ system..............................................................................28~31
GUIDE Plus+ menu bar............................................................................................................................ 29~31
Watch TV
Control TV Programmes ..............................................................................................32
Instant replay function......................................................................................................................................32
Recording
Before Recording..................................................................................................... 33~35
Timer recording (GUIDE Plus+ system).....................................................................................................39
Changing/Deleting a timer recording.......................................................................................................... 42
Record to Hard Disk or recordable DVD............................................................. 43~46
Recording from camcorder............................................................................................................................ 45
6
Download from Www.Somanuals.com. All Manuals Search And Download.
2005-09-16 2:25:02 PM
dvdr5350H_EU_Eng537.indd
6
Table of Contents
Copy from Hard Disk to recordable DVD ........................................................... 47~48
About copying.....................................................................................................................................................47
Discs for recording............................................................................................................................................47
Disc Library
Using the Disc Library ...................................................................................................49
Playback
Basic operation.................................................................................................................................................. 50
Playback from Disc.................................................................................................. 52~55
Starting disc playback................................................................................................................................52~55
Selecting another title/chapter/ track......................................................................................................... 58
Searching forwards/ backwards.................................................................................................................... 58
Pausing playback / slow motion play............................................................................................................ 58
Using the Toolbar options.......................................................................................................................60~61
Edit Recordings
Edit Recordings - Hard Disk................................................................................... 62~66
Edit Recordings - Recordable DVD ........................................................................67~71
About editing recordable DVDs....................................................................................................................67
Deleting recordings/titles............................................................................................................................... 68
Protecting the recorded titles (DVD±RW).............................................................................................. 68
Making the edited DVD±RW compatible...................................................................................................69
Others
Recorder Preferences............................................................................................................................... 72~74
Firmware Upgrade .........................................................................................................81
General Information ......................................................................................................82
Frequently Asked Questions.........................................................................................83
Glossary ...........................................................................................................................89
Display panel symbols/messages........................................................................... 90~91
7
Download from Www.Somanuals.com. All Manuals Search And Download.
2005-09-16 2:25:02 PM
dvdr5350H_EU_Eng537.indd
7
Care and Safety Information
CAUTION!
Cleaning discs
High voltage! Do not open.
You run the risk of getting an
electric shock.
Some problems occur (frozen picture,
sound disruptions, picture distortions)
because the disc inside the unit is dirty.
To avoid these problems, discs should be
cleaned on a regular basis.
The machine does not contain any
user-serviceable parts. Please leave
all maintenance work to qualified
personnel.
To clean a disc, use a micro fibre cleaning
cloth and wipe the disc from the center
to the edge in a straight line.
Setup precautions
Finding a suitable location
– Place the set on a flat, hard and stable
surface. Do not place the set on a carpet.
– Do not position the set on top of
other equipment that might heat it up
(e.g., receiver or amplifier).
– Do not put anything under the set (e.g.,
CDs, magazines).
– Install this unit near the AC outlet and
where the AC power plug can be reached
easily.
CAUTION!
Do not use solvents such as benzene,
thinner, commercially available cleaners,
or anti-static sprays intended for discs.
Hard Disk Drive (HDD)
handling care
Space for ventilation
– Place the apparatus in a location with
adequate ventilation to prevent internal
heat build up. Allow at least 10 cm (4.5”)
clearance from the rear and the top of
the set and 5cm (2.3”) from the left and
right to prevent overheating.
The hard disk drive (HDD) has a high
storage density that enables long
recording duration and high speed data
access. Depending on the setup
environment and handling, some content
may be damaged resulting in failure of
playback and recording. To avoid damage
to the HDD and losing important data,
observe following precautions:
5cm (2.3")
10cm (4.5")
10cm (4.5")
– Do not move the recorder or subject
it to vibration.
5cm (2.3")
– Do not remove the AC power plug
from the mains socket without switching
the recording to standby mode.
Avoid high temperatures, moisture,
water and dust
– Apparatus shall not be exposed to
dripping or splashing.
– Do not place any sources of danger on
the apparatus (e.g., liquid filled objects,
lighted candles).
WARNING!
The HDD is not a device for storing
recorded content permanently. We
recommend that you copy the important
video content to a recordable DVD as
backup.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
2005-09-16 2:25:03 PM
dvdr5350H_EU_Eng537.indd
8
Product Information
Helpful Hints:
Introduction
– If you have questions or if problems come
up during operation, see the chapter
‘Troubleshooting’.
– If you need further assistance, please call
the customer support service in your country.
The corresponding telephone numbers and
e-mail addresses are given in the guarantee
booklet.
This recorder has a built-in Hard Disk
Drive (HDD), you can record up to 250
hours of video (in SEP record mode) on
the internal 160GB (GigaByte) hard disk.
With both recordable DVD and high
capacity HDD in the same recorder, you
have the flexibility to keep recordings on
the HDD or copy to a recordable DVD
for safekeeping or later viewing.
– Refer to the type plate at the rear or
bottom of the product for identification and
supply ratings.
In addition, it has a built-in GUIDE Plus+
system. The GUIDE Plus+ system offers a
free programme listings guide for all the
TV programmes available in your area.
You can also use the GUIDE Plus+
Accessories supplied
– Quick Start Guide
– RF coaxial cable
– Scart cable
system to programme your recorder to
record your favourite TV programmes.
– G-LINK transmitter
– Remote control and batteries
– Power cable
Furthermore, you can take advantage of
features like ‘FlexTime’, ‘Instant Replay’,
or ‘Pause Live TV’, see page 32 for more
information.
Before you can start using this
recorder, complete the basic
connection and set-up in four easy
steps.
Region codes
DVD films are usually not released at the
same time in all regions of the world,
thus all DVD players/recorders are keyed
to a specific region code.
Step 1:
Step 2:
Step 3:
Step 4:
Basic recorder connections
(pages 15~18)
Optional connections for
other devices (pages 19~23)
Basic installation and set-up
(pages 24~25)
This device will only play
Region 2 DVDs or DVDs
manufactured to be played in all
regions ‘ALL’. DVDs from
other regions cannot be played
on this recorder.
ALL
GUIDE Plus+ set-up (pages
26~27)
2
Please take time to read this user manual
before using your recorder. It contains
important information and notes
regarding operation of the DVD
recorder.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
2005-09-16 2:25:07 PM
dvdr5350H_EU_Eng537.indd
9
Product Information (continued)
FlexTime
Special features
You can watch or recall a TV programme while
it is still being recorded. You do not have to
wait until the end of the recording before
starting playback. You can also watch a
different programme from the hard disk while
it is recording something else.
Philips provides the best possible connection
between your recorder and other home
cinema equipment. The recorder is controlled
by external devices (for example, receivers
and TVs) via Cinema Link and is automatically
set to the right system settings.
Instant Replay
You can repeat a scene of a live TV
programme by pressing JUMP BACK button
on the remote control, as often as you like. If
you wish to return to the live TV programme,
just press TUNER.
With this function you can align the sequence
of the channels on your TV with those on
your recorder. Make sure you have
connected the TV to the EXT1 TO TV-I/O
socket of this recorder.
Pause Live TV
A live TV programme is now under your
control. You can pause the programme by
pressing PAUSE button and resume playback
at the scene it was interrupted by pressing
PLAY button. If you want to return to the live
TV programme, just press TUNER.
This function enables you to record a
programme from your Satellite Receiver or
any other devices. Make sure that the device is
connected to the EXT2- AUX I/O socket of
this recorder, and the timer setting has to be
done on the connected device.
i.LINK, is also known as ‘FireWire’ and ‘IEEE
1394’. This connection is used for the transfer
of high bandwidth digital signals as used by
digital video (DV) devices. It carries all audio
and video signals via a single cable.
Direct Record
This function allows you to instantly record the
programme you see on the TV without tuning
this recorder to the same programme.
This is a simple programming system for
recorders. To use it, enter the programming
number associated with your television
programme. You can find this number in your
favourite listings magazine.
Time Shift Buffer
As soon as you turn on this recorder, the
programme showing on the TV will be stored
into the ‘Time Shift Buffer’. It acts as a
temporary HDD storage of your recordings,
the contents will be automatically deleted after
a time period of 6 hours or when you turn off
this recorder. To store the contents on the
hard disk permanently, you have to mark the
section in the ‘Time Shift Buffer’ for recording
to prevent them from being deleted.
The GUIDE Plus+ system lists your TV channel
programming information. You can use it to
schedule recordings, glance at upcoming
programme content, or change channels at
your external receiver/cable box using this
recorder’s remote control.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 10
2005-09-16 2:25:08 PM
Main Unit
a STANDBY-ON 2
j
–
–
Turns on the recorder or to standby
mode.
Starts recording the current TV
programme or the current video input
source.
Marks the title in the time shift buffer for
recording onto the HDD.
b Disc tray
–
–
c OPEN CLOSE ç
–
Opens or closes the disc tray.
Lights up while recording to the HDD or
recordable DVD is in progress.
d Display panel
–
Shows information about the current
status of the recorder.
Sockets behind the flap
Flip down the door as indicated by the
e GUIDE
OPEN label at the right hand corner.
–
Enters/exits the GUIDE Plus+ system.
f
–
OK
k S-VIDEO
Confirms an entry or selection.
–
S-video input for SVHS/Hi8 camcorders
or SVHS/Hi8 video recorders.
Press CAM on the remote control
repeatedly to select ‘CAM1’ when using
this input source.
g :Cursor buttons for moving to the
left/right, or select the previous/next
scene.
: Cursor buttons for moving up/down
or select previous/next title in the
temporary HDD storage during playback.
l VIDEO
Video input for camcorders or video
–
recorders.
h HDD
Press CAM on the remote control
repeatedly to select ‘CAM1’ when using
this input source.
–
–
Displays the content browser menu.
Lights up while access the HDD browser
menu.
m L/R AUDIO
i
–
Audio input for camcorders or video
recorders.
–
Starts playback of the select title/track.
/
n DV IN
Inputs for digital camcorders using this
–
Skips to the previous or next chapter/
track, or hold down the button to make
a reverse/forward search.
–
connector.
Press CAM on the remote control to
select ‘CAM2’ when using this input
source.
–
Stops playback/recording.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 11
2005-09-16 2:25:09 PM
Remote Control
d Alphanumeric keypad
1
–
–
–
Enters numbers or letters in appropriate
entry fields.
Selects a chapter/track/title number to
play.
Selects the recorder’s preset TV tuner
channel.
2
3
4
e BACK
Returns to the previous menu on a video
CD (VCD) or some DVDs.
–
5
6
7
f HDD-BROWSER
Enters/Exits the content browser menu.
–
g DISC-MENU
8
–
Switches to disc mode or displays the
disc content menu.
9
10
11
12
13
h CHANNEL +-
–
While in tuner mode, select the next or
previous TV channel or the external
input source (EXT1, EXT2, CAM1).
Skips to the next page up or down in the
GUIDE Plus+ system.
14
–
i
–
(Day-/ Day+)
Skips to the previous or next day in the
GUIDE Plus+ system.
–
–
Skips to the previous or next title/
chapter/track.
Hold down this button for fast reverse or
fast forward search.
a2
j JUMP-FWD / JUMP-BACK
–
Turns on the recorder or to standby
mode.
–
Jumps forward/backward by a specified
length of time in tuner mode.
b CAM
k EDIT
–
Accesses the camcorder mode (CAM2)
–
Enters/Exits the editing menu.
for DV camcorder recording.
–
In camcorder mode, press CHANNEL
+/-to select other external input
source (CAM1, EXT1 or EXT2).
l TV VOL +-
–
Adjusts the volume of the TV (for Philips
TV with RC5 code only).
m MUTE
c GUIDE
–
Mutes or restores the volume.
–
Enters/Exits the GUIDE Plus+ system.
n Colour coded buttons
–
These buttons are used to select the
coloured options available in some menu
displays on the TV screen.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 12
2005-09-16 2:25:11 PM
Remote Control (continued)
o TUNER
Switches to the recorder’s tuner mode
(TV channel).
–
15
16
p TV/HDD
(only applicable when using the EXT1 TO
TV-I/O scart socket to connect your TV)
Switches to the device that is connected
to the EXT2 AUX-I/O scart socket of
this recorder.
–
17
–
Toggles between the recorder and TV
mode if no video input signal from EXT2
AUX-I/O scart socket.
18
19
q T/C
20
21
22
–
Toggles between ‘T’(title) and
‘C’(chapter) selection during disc
playback, then use the
select a title/chapter number.
keys to
23
24
a/A
25
26
–
–
Toggles between upper and lower case
characters while using the alphanumeric
keypad.
Selects multiple photos in the thumbnail
menu.
r OK
–
Confirms an entry or selection.
s :Cursor buttons for moving to the
left/right, or select the previous/next
scene.
x REC
: Cursor buttons for moving up/
down or select previous/next title in the
temporary HDD storage during playback.
–
Starts recording the current TV
programme or the current video input
source.
t STOP
–
Marks the title in the time shift buffer for
recording onto the HDD.
–
–
Stops playback/recording.
Hold down this button to open or close
the disc tray.
y INFO m
–
Displays the Time Shift video bar while in
tuner mode. It shows the timing of the
TV programmes stored in the temporary
HDD storage.
u PAUSE
Å
–
–
Pauses the playback or recording.
Press repeatedly to advance a paused
picture one frame at a time.
–
Accesses the programme details in the
GUIDE Plus+ system.
v PLAY
–
Starts playback of the select title/track.
z SYSTEM
Enters/Exits the system setup menu.
–
w TIMER
–
Enters/Exits the timer recording menu.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 13
2005-09-16 2:25:13 PM
Remote Control (continued)
Using the remote control to
operate the system
Using the remote control
A Aim the remote
control directly at the
remote sensor (iR)
on the front panel.
3
1
2
B Select the source you
wish to control by
pressing TUNER or
DISC MENU button.
A Open the battery compartment.
B Insert two batteries type R06 or AA,
following the indications (+-) inside
the compartment.
C Select the desired
function (for
example
,
).
C Close the cover.
CAUTION!
Using the alphanumeric keypad to
enter the characters
– Remove batteries if they are
exhausted or if the remote control
is not to be used for a long time.
– Do not mix batteries (old and new
or carbon and alkaline, etc.).
– Batteries contain chemical
substances, so they should be
disposed of properly.
– Press a number button as often as the
required character or the number
appears.
– To enter language-dependent
characters, press
or
on the
corresponding character, e.g.,: ‘å’ press
button {2} for ‘a’ and then press
‘å’ appears.
until
– To enter special symbols, press button
{1} repeatedly.
– To select between big and small letter,
press a/A.
– To enter a space, press button {1}.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 14
2005-09-16 2:25:17 PM
Step 1: Basic Recorder Connections
���
��
����
���
���
��
����
����
Cable Satellite Antenna
A
B
TV
A Connect the existing Antenna/ Satellite/
Cable TV signal (or from the Cable Box/
Satellite Receiver, labelled as RF OUT or
Connecting the antenna
cables
TO TV) to the ANTENNA
socket
These connections enable you to watch
and record TV programmes using this
recorder. If the antenna signal is
connected via a Cable Box or Satellite
Receiver, ensure that these devices are
turned on in order to watch or record
the cable programmes.
on the recorder.
B Use the supplied RF coaxial cable to
connect the TV socket on the
recorder to the antenna input socket (or
labelled as VHF/UHF RF IN) on your TV.
Helpful Hint:
– Depending on how you have currently
connected your TV channel (directly from an
off-air antenna or cable box or VCR), you’ll
have to disconnect some of the cables before
you make the antenna connection.
If you want to connect to a VCR
and/or a separate Cable Box/
Satellite Receiver, see page 19~21 for
other possible connections.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 15
2005-09-16 2:25:19 PM
Step 1: Basic Recorder Connections (continued)
OR
OR
Option 3
Option 2
Option 1
TV
Helpful Hints:
Connecting the video cable
– If your TV displays a selection for the
SCART socket, select ‘VCR’ as the source for
the SCART socket.
– The EXT2 AUX-I/O socket is intended
only for additional devices.
This connection enables you to view the
playback from this recorder. You only
need to choose one of the options below
to make your video connection.
Option 2: Using the S-Video socket
(excellent picture quality)
Option 1: Using the Scart socket
(best picture quality)
Use an S-video cable (not supplied) to
connect the S-VIDEO (Y/C) socket on
the recorder to the S-Video input socket
(or labelled as Y/C or S-VHS) on the TV.
Use the scart cable to connect the
EXT1 TO TV-I/O socket on the
recorder to the corresponding SCART
input socket on the TV.
If your TV has the feature of Cinema
Link or a similar feature, ensure that the
scart cable is connected to the scart
socket that supports CINEMALINK on
your TV. All the available TV channels
will automatically be downloaded to this
recorder.
Option 3: Using theVideo (CVBS)
socket (good picture quality)
Use a composite video cable (yellow - not
supplied) to connect the VIDEO (CVBS)
socket on the recorder to the video input
socket (or labelled as A/V In, Video In,
Composite or Baseband) on the TV.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 16
2005-09-16 2:25:22 PM
Step 1: Basic Recorder Connections (continued)
A
B
TV
C Once you have completed the necessary
connections and the recorder basic
installation/set-up, turn on the
Option 4: Connecting to a
Progressive ScanTV
The progressive scan video quality is only
available when using Y Pb Pr connection
and a progressive scan TV is required. It
provides superior picture quality when
watching DVD movies.
progressive scan feature, see page 82.
Helpful Hint:
– If your TV displays a blank screen or
distorted picture, it may be due to the
recorder’s video output setting does not
match with the video connection. You can
recover the recorder as below:
1) Disconnect the recorder’s ~MAINS from
the power supply.
A Use the component video cables (red/
blue/green - not supplied) to connect the
OUT1- Y PB PR sockets on the
recorder to the corresponding
component video input sockets (or
labelled as Y Pb/Cb Pr/Cr or YUV) on
the TV.
2) Hold down
on the recorder whilst
reconnect its ~MAINS to the power supply.
B Use an audio cable (red/white - not
supplied) to connect the OUT1-
AUDIO L/R sockets on the recorder to
the audio input socket (or labelled as
AV IN or AUDIO IN) on the TV.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 17
2005-09-16 2:25:24 PM
Step 1: Basic Recorder Connections (continued)
OR
OR
AV amplifier/receiver
Option 2: Using the digital audio
socket (Optical or Coaxial)
Connecting the audio cables
You can connect the recorder to an AV
amplifier/receiver in order to enjoy
multichannel surround sound.
This connection enables you to listen to
the playback from this recorder.
However, this connection is not required
if this recorder is connected to the TV
using the supplied scart cable.
Use a coaxial cable (not supplied) to
connect the COAX OUT socket to the
digital coaxial input socket (or labelled as
COAXIAL IN or DIGITAL IN) of the
connected device.
Option 1: Using the analogue audio
sockets
– an A/V receiver or amplifier with a
digital multi-channel sound decoder.
– a receiver with two-channel digital
stereo (PCM).
You can connect the recorder to a two
channel stereo system (mini system, TV)
or receiver in order to enjoy the stereo
sound system.
OR
Use an audio cable (red/white - not
supplied) to connect the OUT2-
AUDIO L/R sockets to the audio input
sockets of the connected device.
Use an optical fibre-optic cable (not
supplied) to connect the OPTICAL
OUT socket to the optical input socket
of the connected device.
Make sure that both plugs are fully
inserted (until a click is heard).
Helpful Hint:
– If you have connected this recorder to your
TV using the OUT1-Y PR PB sockets, then
connect the audio cables to the OUT1-
AUDIO L/R sockets as described in page 17.
TIPS: For option 2 connection, you have to set the appropriate Digital Audio Output setting, see
page 80. Otherwise, no sound or a loud noise may occur.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 18
2005-09-16 2:25:24 PM
Step 2: Optional Connections
Cable Box / Satellite Receiver
(back panel)
(front panel)
���
��
����
���
���
��
����
����
A
E
C
D
TV
B
Place this in front of the
Cable Box/Satellite Receiver, see E.
C Use another scart cable to connect the
Connecting to a Cable Box or
Satellite Receiver
EXT2 AUX-I/O socket on the recorder
to the Scart output socket (or labelled as
TV OUT or TO TV) on the Cable Box/
Satellite Receiver.
Option 1
If your Cable Box/Satellite Receiver
has only an antenna output socket
(RF OUT or TO TV),
refer to “Connecting the antenna cables”
on page 15 for the complete connection
to your TV.
D Connect the supplied G-LINK cable to
the G-LINK socket on the recorder.
E Place the other end of the G-LINK
transmitter in front of the Cable Box/
Satellite Receiver near to the IR sensor
(remote sensor) so that its infrared
detector can receive a clear signal.
This will enable the recorder to
receive data from the GUIDE Plus+
system and control the tuner of the
external receiver.
Option 2 (as shown on the above illustration)
If your Cable Box/Satellite Receiver
has a Scart output socket
A Keep the existing antenna connection
from the Cable Box/Satellite Receiver to
your TV.
Helpful Hint:
– If your TV is connected to the recorder via
the COMPONENT VIDEO (Y Pr Pb) sockets,
then connect the external cable box/satellite
receiver to the EXT1 TO TV-I/O socket.
B Use the scart cable to connect the
EXT1 TO TV-I/O socket on the
recorder to the corresponding SCART
input socket on the TV.
TIPS: Refer to your optional connected devices’ user manual for others possible connections.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 19
2005-09-16 2:25:27 PM
Step 2: Optional Connections (continued)
Back of a VCR (example only)
���
��
����
���
���
��
����
����
CABLE
VHF/UHF
RF IN
SCART IN
SCART OUT
SATELLITE
ANTENNA
VHF/UHF
RF OUT
A
D
B
TV
C
B Use the supplied RF coaxial cable to
connect the TV socket on the
Connecting to aVCR or
other similar device
recorder to the antenna input socket (or
labelled as VHF/UHF RF IN) on your TV.
This connection enables you to record
from video tape to HDD and allows the
VCR to be used for playback on the TV if
the recorder is turned off.
C Use the scart cable to connect the
EXT1 TO TV-I/O socket on the
recorder to the corresponding SCART
input socket on the TV.
D Use another scart cable to connect the
EXT2 AUX-I/O socket on the recorder
to the Scart output socket (or labelled as
TV OUT or TO TV) on the VCR.
IMPORTANT!
Your new recorder can replace the
VCR for all your recording needs.
Just unplug all the connections to
your VCR.
Helpful Hints:
A Connect the existing Antenna/Satellite/
Cable TV signal (or from the Cable Box/
Satellite Receiver, labelled as RF OUT or
– Most commercial video cassettes and
DVDs are copy-protected and therefore
cannot be recorded.
– Connect the recorder directly to the TV. If
there is a VCR or an additional device in
between, the picture quality may be poor
because of the copy protection system built
into this recorder.
TO TV) to the ANTENNA
socket
on the recorder.
TIPS: Refer to your optional connected devices’ user manual for others possible connections.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 20
2005-09-16 2:25:30 PM
Step 2: Optional Connections (continued)
Back of a VCR
(example only)
���
��
Back of a Satellite Box
(example only)
����
���
���
��
����
����
F
A
E
B
C
D
E Use another scart cable to connect the
EXT2 AUX-I/O socket on the recorder
to the Scart output socket (or labelled as
TV OUT or TO TV) on the VCR.
Connecting to aVCR and
Cable Box/Satellite Receiver
F Use another scart cable to connect the
Scart input socket (or labelled as TV IN
or TO DECODER) on the VCR to the
Scart output socket (or labelled as TV
OUT or TO VCR) on the Cable Box/
Satellite Receiver.
A Keep the existing antenna connection to
the Cable Box/Satellite Receiver.
B Use the supplied RF coaxial cable to
connect the antenna output (RF OUT)
socket on the Cable Box/Satellite
Receiver to the ANTENNA
socket
on the recorder.
C Use another RF coaxial cable to connect
the TV socket on the recorder to the
antenna input socket on the TV.
D Use the scart cable to connect the
EXT1 TO TV-I/O socket on the
recorder to the corresponding SCART
input socket on the TV.
TIPS: Refer to your optional connected devices’ user manual for others possible connections.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 21
2005-09-16 2:25:32 PM
Step 2: Optional Connections (continued)
Helpful Hints:
– You can also use the DV IN to connect
Connecting to a camcorder
this recorder to a Personal Computer that
has a DV output socket. The PC must have
an IEEE 1394 Firewire connector.
– It is not possible to record from this
recorder to your camcorder via the DV IN
socket on your recorder.
You can use the front sockets to copy
camcorder recordings. These sockets are
located behind the flap on the right hand
side which provides convenient
connections for a camcorder.
Option 1: Using the DV IN socket
Use this connection if you have a Digital
Video or Digital 8 camcorder. The DV
socket conforms to the i.LINK standard.
It provides the best picture quality.
Use an i.LINK 4-pin cable (not supplied)
to connect the DV IN socket on the
recorder to the appropriate DV OUT
socket on the camcorder.
Press CAM on the remote control
repeatedly to select ‘CAM2’ when using
this input source.
TIPS: Refer to your optional connected devices’ user manual for others possible connections.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 22
2005-09-16 2:25:33 PM
Step 2: Optional Connections (continued)
A
OR
B
Helpful Hint:
Option 2: Using the S-VIDEO In or
– If you connect your camcorder to the scart
socket at the rear of this recorder, press
CAM on the remote control to select
VIDEO In socket
Use the S-VIDEO connection if you have
a Hi8 or S-VHS(C) camcorder. It
provides very good picture quality.
{ EXT1 } or { EXT2 } as the input source.
Alternatively, you can use VIDEO
connection if your camcorder has only a
single video output (Composite Video,
CVBS). It provides good picture quality.
A Connect the S-VIDEO or VIDEO
socket at the front panel of the recorder
to the corresponding S-VHS or Video
output socket on the camcorder.
Press CAM on the remote control
repeatedly to select ‘CAM1’ when using
this input source.
B Use an audio cable (red/white - not
supplied) to connect the AUDIO L/R
sockets at the front panel of the recorder
to the audio output socket on the
camcorder.
TIPS: Refer to your optional connected devices’ user manual for others possible connections.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 23
2005-09-16 2:25:33 PM
Step 3: Installation and Set-up
The basic installation menu will appear
the very first time you turn on this
recorder. These settings will help you set
up the basic recorder features easily,
including TV programme installation,
language settings and the GUIDE Plus+
system.
LANGUAGE AND COUNTRY
Select language and country
Language
Country
English
A. Austria
Done
C Select the country of your residence.
i. Highlight { Country } and press ,
then use keys to select and press
to confirm. If your country is not
available in the list, select { Others }.
ii. Highlight { Done } and press OK on
the remote control.
IMPORTANT!
Complete the basic installation
settings before inserting a disc for
playback or recording. The disc tray
will not open until the basic setup is
completed.
A Press STANDBY-ON 2to turn on
D The TV format menu appears on the TV.
Select the appropriate TV shape
the recorder.
according to the TV you have connected.
B Turn on the TV to the correct
programme number for the recorder
(e.g. ‘EXT’, ‘0’, ‘AV’).
TV FORMAT
Select your TV format
16:9
You may go to Channel 1 on your TV,
then press the Channel down button on
your TV’s remote control until you see
{ CINEMA LINK } or { LANGUAGE
AND COUNTRY } menu appear on the
TV.
TV Shape
4:3 Letterbox
4:3 Panscan
Done
i. Highlight { TV Shape } and press ,
use keys to select and press
to confirm.
If your TV has Cinema Link or a similar
feature, downloading of the TV channels
will start automatically. When the data
transfer is complete, press OK on the
remote control to continue with the
time-date download. Next go to step G.
16:9
CIMEMA LINK
4:3 Letterbox
4:3 PanScan
Loading data from TV.
OR
ii. Highlight { Done } and press OK on
If { Language and Country } menu
appears on the TV, use keys to
select the desired menu language and
press to confirm.
the remote control.
TIPS: After completing the basic installation, you can change or update your settings using the system
setup menu, see page 75~80.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 24
2005-09-16 2:25:37 PM
Step 3: Installation and Set-up (continued)
i. If the information is correct, select
{ Done } in the menu and press OK.
ii. If changes are required, use the
alphanumeric keypad 0-9 to enter
the correct time and date in the
respective field.
E The Channel Search menu appears on
then TV. Select { Channel Search } in
the menu and press OK on the remote
control to start
It takes a few minutes to complete.
CHANNEL SEARCH
Automatic Channel search will find and store all channels.
Make sure to connect the antenna.
H The basic installation is now completed.
Easy setup completed. Continue with GUIDE Plus+
installation?
Channel Search
Skip Search
Start
OK
Continue
OK
OK
Install later
Note: Make sure you have successfully
made all the required connections to this
recorder, the TV and Satellite Receiver/
Cable Box (if any) and turned them on.
The channel search will detect the signals
and save all the available programme
channels.
i. Select { Continue } in the menu and
press OK to start the GUIDE Plus+
installation. See next page for the
complete detailed setup.
ii. Select { Install later } in the menu
to skip the GUIDE Plus+ installation.
The next time when you want to
install the GUIDE Plus+ system, press
GUIDE on the remote control, see
next page.
If no channels are found :
– Try the auto TV channel installation
after completing the basic setup, see page
78.
F After the channel search is finished, the
total number of found and stored
I Wait until the recorder has finished
initialising the system, then press OK to
exit.
channels appears, press OK to continue.
CHANNEL SEARCH
You may now enjoy using this
recorder.
Analogue TV channels found: 9
Restart Search
Helpful Hint:
Continue
OK
– The TV programme listings do not appear
on the GUIDE Plus+ system as soon as you
complete the basic installation. It may take
up to 24 hours to receive TV listings data.
G The time and date menu appears.
TIME AND DATE
Please check the Time and If incorrect, navigate
right to correct the Time.
Time
Date
20:01
31-01-2005
Done
OK
TIPS: After completing the basic installation, you can change or update your settings using the system
setup menu, see page 75~80.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 25
2005-09-16 2:25:42 PM
Step 4: Set-up the GUIDE Plus+ system
Your recorder is equipped with the
GUIDE Plus+ system. This system offers
a free interactive programme guide that
lists all the TV programmes available in
your area. Before you can enjoy this
feature, you have to define your
geographic location and your current
setup devices in order to receive correct
GUIDE Plus+ TV listing data.
{ Language } / { Country }
These settings will be taken from the
basic installation set up.
{ Postal code }
Press OK to access the entry menu. Use
keys to enter the local postal code
and use keys to move to previous
or next entry field.
Note: The postal code you enter must be
correct, and must represent a postal code in
the identified country. If not, you will receive
no or incorrect TV listings data.
A If an introduction to the GUIDE Plus+
system appears on the TV, read the
contents and press OK to continue.
The GUIDE Plus+ basic setup menu
appears.
{ External Receiver 1/2/3 }
Note: If you do not have an external receiver
connected, leave the fields as “None” and
press the Red button on the remote control
to exit the menu. Go direct to step H.
Otherwise, press GUIDE on the remote
control, then press and press
repeatedly until you select the { Setup }
menu bar.
You can connect up to three external
receivers (e.g., satellite receiver, cable
box) to this recorder. Complete the
installation of the external receiver as
follows:
a) Use keys to select External Receiver
1, 2 or 3 and press OK.
b) Press OK again to continue. Select the type
of the external receiver and press OK.
{ Cable }
Select this for cable receiver, cable box.
B Press to select { Basic Setup } in the
menu and press OK to access the setup
screen.
{ Satellite }
Select this for satellite receiver.
{ Terrestrial }
Select this for digital terrestrial decoder
box.
c) Select the service provider from the list and
press OK.
{ None }
Select this if you do not have a provider.
d) Select the brand of your receiver from
the list and press OK.
{ None }
Select this if you do not find your brand.
TIPS: After completing the setup, leave the recorder in standby mode and turn on your external
receivers overnight to receive the TV listing data.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 26
2005-09-16 2:25:43 PM
Step 4: Set-up the GUIDE Plus+ system (continued)
e) Identify the socket through which your
I Once complete, press GUIDE to exit
external receiver is plugged into the
the menu.
recorder (for example ‘EXT 2’ for
1) Leave the recorder in ‘standby’
EXT2 AUX-I/O) and press OK.
mode during the night to load
the TV listing data.
{ Antenna (RF lead) }
Select this if the external receiver is
2) If you use an External Receiver, you
connected via the antenna cable. Enter the
have to tune your External Receiver
programme number which your external
manually to your host channel, see
below table for details.
Leave the External Receiver ‘ON’
overnight.
receiver is turned to on your recorder.
C If you have connected an external
receiver, ensure that the G-LINK
transmitter is properly connected and
positioned, see page 19.
This will allow you to control the
tuner of the Satellite Receiver/Cable Box
through the GUIDE Plus+ system.
Note: If you tune to your Host Channel
before going into ‘standby’, your recorder will
start immediately to download TV listings data.
EPG DOWNLOAD will shown in the display
panel. This process can take up to two (2)
hours. You can stop the download at any time
by turning the device ‘on’. Alternatively you
can leave the recorder in ‘standby’ overnight
and your recorder will perform the TV listings
D Turn on the external receiver and use
the receiver’s remote control to
select programme number {02} on the
receiver.
data download automatically.
E Press OK to continue.
Country/City
(Language)
Host Channel
(aerial / cable)
Host Channel
(SAT)
The GUIDE Plus+ system is sending
signal via the G-LINK connection to the
external receiver to switch to a certain
programme number.
Deutschland
Österreich
Eurosport
Eurosport
Eurosport Astra1 19.2E
Eurosport Astra1 19.2E,
Hotbird 13.0E
Eurosport Astra1 19.2E
British Eurosport Astra2 28.2E
Schweiz (Deutsch) Eurosport
United Kingdom
France
España
ITV
Canal +
Tele 5
F If the external receiver has switched to
the programme number displayed on the
TV, select { Yes } and press OK.
Nederland
TMF/Eurosport
TMF Astra1 19.2E /
Hotbird 13.0E
TMF Astra1 19.2E
TMF Astra1 19.2E
TMF Astra1 19.2E
-Eindhoven
-Rotterdam
-Amsterdam
TMF
TMF
TMF
Otherwise, select { No } and press
OK to try a different code. Repeat this
process until the external receiver
België (Vlaanderen) TMF
Italia Sport Italia
switches to other programme number.
Check your TV listings line-up on the
{ Editor } screen the next day to ensure
the data download is completed, see page
31.
G Press the Green button to return to the
setup screen.
H If you want to specify the source and
programme number of a GUIDE Plus+
host channel, select { Host Channel
Setup } in the menu and follow the
instructions on the TV to complete the
setup.
Helpful Hints:
– If your country/region is not in the list above
or you are not able to receive TV listings data,
you can still use the GUIDE Plus+ system for
ShowView and manual recordings.
– If a problem comes up during the GUIDE
Plus+ system set-up, please visit the website
assistance.
The default host channel setup is set
to ‘Automatic’.
TIPS: After completing the setup, leave the recorder in standby mode and turn on your external
receivers overnight to receive the TV listing data.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 27
2005-09-16 2:25:44 PM
Using the GUIDE Plus+ system
GUIDE Plus+ system
introduction
Quick access functions
There are several features integrated in
the GUIDE Plus+ system. These functions
will be displayed at the top Action Bar
whenever applicable. You can access the
function by pressing the matching colour
coded button on the remote control.
After the GUIDE Plus+ setup and data
download is completed, you can start to
explore the different features and areas
of the GUIDE Plus+ system.
C
A Press GUIDE on the remote control.
B Use keys to navigate in the menu.
C
D
B
E
F
A
Schedule recordings
Select a programme you wish to record
and press the Red button on the remote
control for
You can store up to 25 TV
programmes for recording.
.
The GUIDE Plus+ system is divided in
six screen components:
A
Information Panels – It displays
instructions on the GUIDE Plus+ system,
programme promotions and
advertisements.
Select a specific channel
programme
B
Video Window – It shows the picture of
Press the Yellow button on the remote
the current TV programme. You can
continue to watch the current programme
while entering the GUIDE Plus+ system.
control for
to view the logos of
all the available channels in your area,
C
Action Bar – It displays the available
functions. The action buttons are activated
directly with the respective colour coded
buttons on the remote control.
press OK to select.
Helpful Hint:
– The shows you have scheduled for
recording can be reviewed and edited in the
‘Schedule’ screen, see page 30.
D
E
Information Box – It displays short
programme descriptions or help menus.
Menu Bar – It displays the GUIDE Plus+
menus and your current selection.
F
Grid/Tiles – It displays the TV listings
information by channel and time, seven
days in advance.
If certain channels are missing, go to the
{ Editor } screen to check and change
the channels, see page 31.
TIPS: Press Blue button to return to the current time in the ‘Grid’ screen.
Press GUIDE to exit the menu.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 28
2005-09-16 2:25:52 PM
Using the GUIDE Plus+ system (continued)
‘Search’ screen
GUIDE Plus+ menu bar
The Search screen allows you to locate
the programme listings by category. It
enables you to quickly and easily find
something of interest to watch or record.
The GUIDE Plus+ system consists of
seven areas in the menu bar:
Grid
Info
Search My TV Schedule
Editor Setup
A Press GUIDE on the remote control.
The GUIDE Plus+ screen appears.
B Press to highlight the menu bar, then
press to select a menu bar option
and press to access.
The information on the individual menu
bar is described in the following pages.
A Select { Search } and press .
B Use keys to select a search category:
{ Movies, Sport, Children, Others or
My Choice }.
‘Grid’ screen
The Grid screen is the main TV listings
screen of the GUIDE Plus+ system. It
provides you with seven days of TV
listings information.
C Use keys to select a sub-category and
press OK to start the search.
All the programmes for the next
seven days in this sub-category are
displayed by date and time.
Select { All } to receive results for all
sub-categories in this category.
D Use keys to select a programme
and press OK to start viewing.
To set your own search keywords:
A Select { My Choice } and press .
B Press the Yellow button on the remote
A Use keys to select a desired TV
channel.
control for
.
Press CHANNEL +/-to scroll
down/up a page at a time.
C Use keys to enter your keyword
and press OK to confirm.
B Use keys to select a programme.
Press to go directly to the
D Press the Green button for
.
E Highlight your keyword and press OK to
previous day’s or the next day’s TV
listings.
start the search.
C Press OK to start viewing.
TIPS: Press Blue button to return to the current time in the ‘Grid’ screen.
Press GUIDE to exit the menu.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 29
2005-09-16 2:25:53 PM
Using the GUIDE Plus+ system (continued)
‘MyTV’ screen
‘Schedule’ screen
The My TV screen allows you to set up a
personal profile. You can define the
profile by channels, categories and/or by
keywords. It enables you to quickly and
easily find something of interest to watch,
or record.
The Schedule screen allows you to
examine, delete and edit the scheduled
recordings. Additionally, you are able to
set a recording here using ShowView or
Manual. See pages 40~41 for more
information.
‘Info’ screen
A Select { My TV } and press .
The Info screen is reserved for additional
information such as News, Weather
Reports, Stock Quotes, etc. The
information can be broadcast in the same
way as the TV listings data and may vary
by region.
B Press the Yellow button on the remote
control for
.
C Use keys to select { Channel },
{ Categories } or { Keywords }.
D Press the Yellow button for
.
{ Channel }
Select a channel from the ‘Channel’
screen and press OK.
Repeat this step to add more channels
(up to 16).
{ Categories }
Select a category from the ‘Search’
screen and press OK.
Repeat this step to add more
categories (up to 4).
If there are no categories available, no
data has been provided yet.
{ Keywords }
Use keys to enter your
keywords and press OK to confirm.
Repeat this step to add more
keywords (up to 16).
E Press OK to activate your profile.
TIPS: Press Blue button to return to the current time in the ‘Grid’ screen.
Press GUIDE to exit the menu.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 30
2005-09-16 2:25:55 PM
Using the GUIDE Plus+ system (continued)
‘Editor’ screen
‘Setup’ screen
The Editor screen is the central location
for you to manage your channels. Every
change in the Editor leads to a change in
the Grid. You can assign programme
numbers to the TV channels, switch
channel On or Off and select a channel
source (Tuner, External Receiver).
The Setup screen is the central location
for you to configure the GUIDE Plus+
system according to your personal
situation (Region, TV reception). In
addition you have the option to set-up
your Host Channel and to view the
GUIDE Plus+ system information screen.
Editor
For a detailed description of the GUIDE
Plus+ setup process, see pages 26~27.
A Select { Editor } and press .
The display of the Editor screen
depends on the specific TV reception
environment of your area.
To make changes to the Setup
A Select { Setup } press .
To turn On/Off the channel
B Move to the left tile of the channel that
you want to change, then press Red
button on the remote control.
B Highlight { Basic Setup } and press OK.
C Move the highlight to the part that you
would like to change (Language, Country,
Postal Code, External Receiver 1, 2, 3)
and press OK.
The ‘On’ channels’ programme listings
will be displayed in Grid screen.
To change the Source
D Follow the instructions on the TV to
make the necessary changes and press
OK.
C Move to the right tile of the channel that
you want to change, then press Red
button to change the source (e.g., Tuner,
Ext. Rec. 1, etc.).
Some changes might require a new
download of TV listings information. This
can take up to 24 hours.
The programme number changes
automatically to reflect the new source.
To change the Programme Number
D Move to the right tile of the channel that
you want to change, then press the
Green button and use the
alphanumeric keypad 0-9 to enter the
programme number.
TIPS: Press Blue button to return to the current time in the ‘Grid’ screen.
Press GUIDE to exit the menu.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 31
2005-09-16 2:25:56 PM
Control TV Programmes
For more information about the
temporary HDD storage (Time
Shift Buffer), see next page.
Switching on toTV
programme
Pause liveTV function
TUNER
Sometimes, you might be interrupted when
watching your favourite TV programme or
match. Now, you can pause the show by
PAUSE
JUMP-BACK
pressing PAUSE
on the remote
Å
PLAY
INFO
control and press PLAY to resume
playback. It behaves exactly as if you were
in control of the live broadcast.
If you want to return to the live TV
programme, just press TUNER.
A Turn on the TV to the correct
programme number for the recorder
(e.g. ‘EXT’, ‘0’, ‘AV’).
B Press STANDBY-ON 2to turn on
this recorder.
Instant replay function
If no TV programme appears on the
screen, press TUNER on the remote
control.
When watching a live TV programme,
you can press JUMP-BACK on the
remote control to jump back 30 seconds
(default setting) upon every single press
for instant replay.
C Press CHANNEL +/− to select a TV
channel.
The active TV programmes will be
stored automatically to the temporary
HDD storage in this recorder. The
information is showed on the Time Shift
video bar.
If you want to return to the live TV
programme, just press TUNER.
FlexTime function
If you switch to another TV channel on
the recorder, a new title will be created
and a vertical line will be shown on the
Time Shift video bar.
You do not need to wait until the
recording is completed before starting
playback.
While the recording is in progress, hold
down
on the remote control to go
You can choose to display or remove the
Time Shift video bar by pressing the
INFO mbutton on the remote control.
back to the beginning of the recording
and start playing from there.
TIPS: Press INFO on the remote control to display or remove the Time Shift video bar.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 32
2005-09-16 2:25:57 PM
Before Recording
In addition, executing the following
actions will also clear the contents in the
temporary HDD storage :
– Press CAM on the remote control.
– Enter to { Setup } or { Record mode }
option in the system setup menu.
About temporary HDD
storage/Time Shift video bar
The current TV programme will be
stored in the temporary hard disk
storage called ‘TSB’ (Time Shift Buffer)
once the recorder is turned on. It will
continuously store up to six (6) hours of
TV programmes.
This action will clear the Time Shift Buffer.
Do you want to continue?
Yes
No
The Time Shift video bar will appear on
the TV, it indicates the status and timing
of the TV programmes stored in the
temporary HDD storage. You can
choose to display or remove the video
bar by pressing the INFO mbutton on
the remote control.
i) To proceed and clear the contents in
the temporary HDD storage, press
OK on the remote control to select
{ Yes } in the menu, OR
ii) Select { No } in the menu and press
OK on the remote control to abort.
Marking the contents for recording
You need to ‘mark’ the contents in the
temporary HDD storage before it can be
recorded to the hard disk drive (HDD),
see page 36.
The Time Shift video bar consists of the
following information:
a
The TV programme start time.
Once it has exceeded six (6) hours, the
beginning of the contents will be deleted
and the start time will be changed
accordingly.
To select a title (programme)
Press INFO mto show the overview
panel and use keys to select a title.
b
c
Remaining space in the temporary storage.
Clips that are selected to be recorded
onto the HDD (marked Red).
To find a scene within the title
Use keys.
d
e
Current position and time of the TV
programme broadcast.
Title markers (when you switch to a TV
channel for more than 1 minute, a new
title marker will be created)
To record the current programme
Press REC once. Press the REC
again to start a 30 minutes recording.
f
Present time
To mark for recording from the
current scene
Press the Red button.
Warning!
The TV programmes stored in the
temporary HDD storage will be cleared
once it exceeds the storage buffer or
when you press STANDBY-ON 2to
turn off the recorder.
To cancel the marked recording
Press the Red button.
To end the recording
Press STOP
.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 33
2005-09-16 2:25:58 PM
Before Recording (continued)
D Use keys to select the setting you
wish to change and press to access its
options.
Default recording settings
You can preset your recording settings in
the recording setup menu.
Instructions and explanation of the
options are provided in the following
pages.
If the selection in the menu is greyed
out, that means the feature is not
available or not possible to change at the
current state.
E To exit, press SYSTEM.
Record Mode settings chart
Record Mode
HQ (high quality)
SP (standard play)
31
62
1
2
2
4
A Press SYSTEM on the remote control.
The system setup menu appears.
SPP (standard play plus)
LP (long play)
78
94
2.5
3
5
6
EP (extended play)
SLP (super long play)
SEP (super extended play)
125
157
250
4
6
8
8
12
16
B Press to select { Preferences }.
C Press to select { Recording }.
Helpful Hint:
Recording
– Changing the Recording Mode will clear
the contents in the temporary HDD storage,
only the marked contents (in red bar) will be
recorded onto the hard disk drive (HDD) of
this recorder.
Preferences
Record mode
Language
SP
Lang I
Off
Auto protect
Chapters
Smart
Recording
Preferences
Sat record
Direct rec
Off
On
34
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 34
2005-09-16 2:26:00 PM
Before Recording (continued)
Recordings (underlined options are the factory default settings)
Record mode
The recording mode defines the picture quality of recordings and the
maximum recording time on the HDD (hard disk drive), see page 34 on
‘Recording Mode Setting Chart’.
Important! When copying from HDD to a recordable DVD, the
recording mode of the selected recording in the HDD will automatically
be transferred. Selecting another recording mode is not possible.
The factory default setting is SP.
Language
Selects the recording language to be used for TV programmes which are
transmitted an additional audio language. For example, if a programme is
available in English and Spanish, with Spanish being the additional language
option.
{ Lang I }
{ Lang II }
–
–
Original broadcast language.
Additional audio language.
Auto protect
Chapters
With this feature, the recordings on the HDD will not be automatically
deleted if there is no space for new recordings.
{ On }
{ Off }
–
–
Deletes and edits on the recorded titles are not possible.
Turns off the function.
Automatically divides a recording (title) into chapters by inserting chapter
markers at a specific interval. This enables you to access a specific point in
the recording quickly.
{ Off }
–
No chapter marker is inserted in the recording.
{ Standard } – Chapter markers are inserted automatically during
recording at approximately five (5) minutes interval.
{ Smart }
–
This setting is only available for the DV camcorder
recording. A chapter marker is inserted whenever
there is a break in the recording, for example, when
the recording is stopped or paused and restarted again.
SAT record
Direct rec.
This feature is only available if you have connected a Satellite Receiver or
other devices to the EXT 2 AUX-I/O scart socket of this recorder, see
page 38 for more information.
{ Off }
{ EXT2 }
–
–
Turns off the function.
Enables this recorder to start and stop recording when
a signal is received from the connected device.
With this feature, you can immediately record the programme that you
are viewing on the TV by pressing REC button without the needs of
turning on this recorder, see page 38 for more information.
{ On }
{ Off }
– Enables recording directly from the TV display.
– Turns off the function.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 35
2005-09-16 2:26:00 PM
Record to Hard Disk
IMPORTANT!
If the TV programme data is available in
the GUIDE Plus+ system
“Record 1 Program” will appear at the
right end of the video bar. The recording
will stop automatically at the end of the
TV programme.
Unrecordable pictures
Television programmes, video tapes,
discs, and other material that are
copyright cannot be recorded on this
recorder.
If you want to record the following TV
programme, press REC again.
RecordingTV programmes
If the TV programme data is not available
in the GUIDE Plus+ system, pressing the
Follow the instructions below to record
the TV programmes onto the HDD,
where you can store for future viewing
and copy to a recordable DVD disc if
required.
REC again will set the recording time
in 30-minute increments, up to a
maximum of six (6) hours.
C To stop the recording before the
scheduled ending, press STOP
.
Record a specific section ofTV
programmes
A Press INFO mon the remote control
to display the Time Shift video bar.
B Use keys to select a TV programme
that can be found in the temporary HDD
storage.
C Use keys to search for the beginning
of the scene where you want to start
Record the currentTV programme
recording, then press PAUSE
.
Å
A Press INFO mon the remote control
D Press the Red button on the remote
to display the Time Shift video bar.
control to start recording from here.
B Press REC on the remote control.
E Press PLAY to continue playback.
The current TV channel will be
recorded, up to maximum of six (6)
hours.
F Press to search for the point where
you want to end the recording and press
STOP on the remote control.
21:00
23:13
A red marking will be visible on the
video bar to indicate the marked
recording.
Cancel rec.
BACK
MORE INFO
TIPS: Set the appropriate recording mode. It determines the actual recordable time to the HDD or a
recordable DVD, see page 35.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 36
2005-09-16 2:26:02 PM
Record to Hard Disk (continued)
Playback from DVD
Simultaneous record and play
function
Press OPEN CLOSE çat the
recorder’s front panel and load in a disc
to start playback.
While recording the TV programme to
the HDD is in progress, you can play a
previously recorded title from the HDD,
or play a DVD video disc, or watch the
playback from other connected device.
Playback from other device
This is only possible if this recorder is
connected to the TV using the EXT1 TO
TV-I/O socket.
Press TV/HDD to view the picture from
the device which is connected to the
EXT2 AUX-I/O socket of this recorder.
Watching otherTV programmes
If there is no device connected to the
EXT2 AUX-I/O socket, pressing
TV/HDD will switch to the TV mode.
Use the TV’s channel up/down button to
select a different TV channel.
Playback from HDD
Helpful Hint:
A Press HDD-BROWSER, then press
repeatedly until the title menu appears
control to mark the end of the recording.
– Remember to turn the TV back to its video
input channel if you want to watch the TV
channel through the recorder or playback the
recorded disc.
HDD/VIDEO
SORTING�
1/6
SOURCES
Hard Disk
1/3
Recoding Date
Alphabetical
Delete Order
Protected
Disc Tray
Disc Library
Genre
Last Played
[BROWSER]
B Use keys to select a title in the
HDD content menu and press PLAY
to start playback.
TIPS: Set the appropriate recording mode. It determines the actual recordable time to the HDD or a
recordable DVD, see page 35.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 37
2005-09-16 2:26:03 PM
Record to Hard Disk (continued)
Direct recording fromTV
Automatic recording from
Satellite Receiver
If you have connected this recorder to
your TV using a scart cable, you can
immediately start recording the
programme which is currently being
shown on the TV while the recorder is in
standby mode.
The feature is only applicable for the
Satellite Receiver (or any similar devices)
that is connected to the EXT2 AUX-I/O
scart socket of this recorder. In addition,
the Satellite Receiver must have a timer
function that is able to control the
A Ensure that the { Direct rec. } mode in
the recording setting is turned on (see
page 35).
recording function of this recorder.
A Ensure that the { Sat record } mode in
the recording setting is set to { EXT2 }
(see page 35).
B While watching the TV programme, press
REC on the remote control to start
recording.
B Use the Satellite Receiver’s timer
programming function to programme the
recording (refer to the Satellite
Receiver’s user manual).
C To stop recording, press STOP
.
Otherwise, it will stop automatically
after six (6) hours of recording.
C Leave the recorder and Satellite Receiver
in standby mode for the recording.
You have to turn off the Satellite
Receiver to standby mode before the
recorder.
Helpful Hint:
– Direct recording is not possible from the
device connected to the EXT2 AUX I/O scart
socket.
The recorder will start recording
when it detects a signal from the Satellite
Receiver.
Helpful Hint:
– The recorder’s timer recordings take
precedence over automatic satellite recording.
Automatic Satellite recording will stop if the
recorder’s timer recording is due to start.
TIPS: Set the appropriate recording mode. It determines the actual recordable time to the HDD or a
recordable DVD, see page 35.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 38
2005-09-16 2:26:03 PM
Record to Hard Disk (continued)
About timer recording
Timer recording (GUIDE
Plus+ system)
Use the timer recording to automatically
start and stop a recording at a later date/
time. This recorder will tune to the right
programme channel and begin recording
at the specified time.
To schedule a recording with the GUIDE
Plus+ system, simply select the desired
programme from the channel list.
A Turn on the TV to the correct
programme number for the recorder
(e.g. ‘EXT’, ‘0’, ‘AV’).
With this recorder, you can schedule up
to 25 recordings at a time and up to six
(6) hours for each recording. During
timer recording, changing the recorder’s
channel is not possible.
B Turn on the recorder and press GUIDE
on the remote control.
The GUIDE Plus+ screen appears.
There are three ways to
programme a timer recording
– Using the GUIDE Plus+ system
– Using the ShowView system
– Manual timer recording
Note: If the GUIDE Plus+ setup menu
appears, it means that this recorder has
not been installed with the GUIDE Plus+
programme data yet. See pages 26~27 to
set-up the GUIDE Plus+ system.
C Use keys to select a desired TV
channel and use keys to select a
programme.
About ‘VPS/PDC’
‘VPS’ (Video Programming System) or
‘PDC’ (Programme Delivery Control) is
used to control the start and duration of
TV channel recordings. If a TV
programme starts earlier or ends later
than was scheduled, this recorder will
then turn on and off at the correct time.
Press CHANNEL +/-to scroll
down/up a page at a time.
Press
to go directly to a day
before or the next day TV listings.
D Press the Red button on the remote
control for
.
E Press GUIDE to exit the menu.
TIPS: Set the appropriate recording mode. It determines the actual recordable time to the HDD or a
recordable DVD, see page 35.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 39
2005-09-16 2:26:12 PM
Record to Hard Disk (continued)
Timer recording (ShowView
system)
This is a simple timer programming
system. To use it, enter the ShowView
programming number associated with
your television programme. You can find
this number in your TV listings magazine.
If incorrect programming number is
entered, you have to select the correct
programme number manually. Follow the
instructions on the TV to edit the date
and time.
All the information needed by this
recorder for programming is contained in
the programming number.
E The default recording settings are
displayed in the pink tile. To make
changes, press the matching colour coded
button on the remote control.
A Turn on the TV to the correct
programme number for the recorder
(e.g. ‘EXT’, ‘0’, ‘AV’).
{ Frequency }
B Turn on the recorder and press TIMER
on the remote control.
Press the Red button on the remote control
repeatedly to select the repeat recording
setting (Once, Weekly, M-F).
The GUIDE Plus+ schedule screen
appears.
{ Timing }
Press the Green button on the remote
control repeatedly to select adding extra time
(+0, +10, +20, +30) to the end of recording or
select VPS/PDC (V-P) function.
Note: VPS/PDC is not available for external
receiver.
F Press TIMER to confirm and exit the
menu.
C Press the Red button on the remote
control for
.
The ‘TIMER’ icon will light up on the
display panel if a timer recording is set.
If the recorder is not in standby mode,
a notification message will appear before
the timer recording begins.
The ShowView entry screen appears.
=
=
=
=
=
=
=
=
If you ignore the message, the
recorder will automatically switch to the
respective channel and start recording.
D Use the alphanumeric keypad 0-9 to
enter the ShowView programming
number and press OK to confirm. (e.g.
5-312-4 or 5,312 4, key in ‘53124’).
The GUIDE Plus+ system is decrypting
the programming number and
transforming it into a scheduled event.
TIPS: Set the appropriate recording mode. It determines the actual recordable time to the HDD or a
recordable DVD, see page 35.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 40
2005-09-16 2:26:14 PM
Record to Hard Disk (continued)
F Press the Green button to confirm and
Timer recording (manually)
go to the next parameter.
A virtual keyboard appears on the TV
for entering the title name.
A Turn on the TV to the correct
programme number for the recorder
(e.g. ‘EXT’, ‘0’, ‘AV’).
G Once complete, store the setting by
pressing the Green button for
The scheduled manual recording will
be displayed.
.
B Turn on the recorder and press TIMER
on the remote control.
The GUIDE Plus+ schedule screen
appears.
H The default recording settings are
displayed in the pink tile. To make
changes, press the matching colour coded
button on the remote control.
{ Frequency }
Press the Red button on the remote control
repeatedly to select the repeat recording
setting (Once, Weekly, M-F).
{ Timing }
C Press the Green button on the remote
Press the Green button on the remote
control repeatedly to select adding extra time
(+0, +10, +20, +30) to the end of recording or
select VPS/PDC (V-P) function.
Note: VPS/PDC is not available for external
receiver.
control for
The recording date appears.
.
20
-
May
D Use keys or alphanumeric
keypad 0-9 to enter the recording
information (date, start time, end time)
and press the Green button to confirm
each entry and go to the next parameter.
I Press TIMER to confirm and exit the
menu.
The ‘TIMER’ icon will light up on the
display panel if a timer recording is set.
If the recorder is not in standby mode,
a notification message will appear before
the timer recording begins.
If you ignore the warning, the
recorder will automatically switch to the
respective channel and start recording.
E When ‘TUNER 01’ appears on the
display, select the input source and enter
the programme channel.
To select an external input channel,
highlight ‘TUNER” in the menu and use
keys to select { EXT1 }, { EXT2 } or
{ CAM1 }.
To select an internal TV channel,
highlight ‘01’ in the menu and use the
alphanumeric keypad 0-9 to enter the
programme channel.
TIPS: Set the appropriate recording mode. It determines the actual recordable time to the HDD or a
recordable DVD, see page 35.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 41
2005-09-16 2:26:18 PM
Record to Hard Disk (continued)
To delete the timer programme
Press the Red button on the remote
Changing/Deleting a timer
recording
control for
.
To edit the timer programme
Press the Green button on the remote
A Turn on the TV to the correct
programme number for the recorder
(e.g. ‘EXT’, ‘0’, ‘AV’).
control for
, and follow the
instructions on the TV to make the
necessary changes/entry.
B Turn on the recorder and press TIMER
on the remote control.
To edit the Frequency/Timing
Highlight the respective tile in the menu
and press the Red button to change the
frequency or the Green button to change
the timing.
The GUIDE Plus+ schedule screen
appears.
D Once complete, press TIMER to
confirm and exit the menu.
C Press to select a timer programme
which you want to delete/edit.
TIPS: Set the appropriate recording mode. It determines the actual recordable time to the HDD or a
recordable DVD, see page 35.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 42
2005-09-16 2:26:19 PM
Record to Hard Disk or recordable DVD
A Connect your Digital Video or Digital 8
Recording from a DV
Camcorder
camcorder to the DV IN socket of this
recorder (see page 22).
B Turn on the TV to the correct
programme number for the recorder
(e.g. ‘EXT’, ‘0’, ‘AV’).
When you connect a DV camcorder to
the DV IN socket of this recorder, you
can control both the camcorder and this
recorder using the recorder’s remote
control. Furthermore, smart chaptering
feature ensures the chapter markers are
created at each break in the images.
C Press CAM on the remote control.
A warning message appears.
Switching to camera mode will clear the
Time Shift Buffer.
Select a media type to record.
Before you start...
Hard Disk
Mark the contents in the temporary
HDD storage (time shift buffer) for which
you wish to record to the HDD, see page
33. Otherwise, all the contents will be
cleared when you start camcorder
recording.
Recordable DVD
Cancel
D To continue, select to record to { Hard
Disk } or { Recordable DVD } in the
menu and press OK to confirm.
All the contents in the temporary
HDD storage will be cleared, only the
‘marked’ contents will be stored onto the
HDD.
Otherwise, select { Cancel } in the menu
and press OK to abort the operation.
E Turn on the DV camcorder and start
playback.
CAM 2
+RW
DV CONTROL
TIPS: Set the appropriate recording mode. It determines the actual recordable time to the HDD or a
recordable DVD, see page 35.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 43
2005-09-16 2:26:23 PM
Record to Hard Disk or recordable DVD (continued)
F To use the recorder’s remote control to
control the camcorder operation during
recording, press the Green button on the
remote control for { DV CONTROL }.
The DV control buttons display on the
screen.
CAM 2
+RW
DV CONTROL
G You can pause, play, stop, fast forward or
rewind the scene using the
keys on the recorder’s remote control to
select the respective control buttons on
the screen.
H To stop the recording, press STOP
.
Both the recorder and camcorder will
stop.
I To end the recording operation, press
TUNER.
Helpful Hints:
– Some camcorders cannot be controlled
using this recorder’s remote control.
– Mixing of PAL and NTSC video format
recording on a same recordable DVD is not
possible.
– If a part of the tape is blank, the recorder
will pause recording. Recording will restart
automatically when there is a recordable
signal. However, if there is more than five (5)
minutes of blank tape, the recording will end
automatically.
– A chapter marker is inserted every time
when there is a break in the time code on
the DV tape. This happens when the
recording is stopped or paused then
restarted.
TIPS: Set the appropriate recording mode. It determines the actual recordable time to the HDD or a
recordable DVD, see page 35.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 44
2005-09-16 2:26:24 PM
Record to Hard Disk or recordable DVD (continued)
E To continue, select to record to { Hard
Recording from camcorder
Disk } or { Recordable DVD } in the
menu and press OK to confirm.
When you connect the camcorder to the
All the contents in the temporary
VIDEO or S-VIDEO socket at the front
HDD storage will be cleared except for
panel of this recorder or the EXT1 or
the ‘marked’ recordings.
EXT2 socket at the back panel, follow the
steps below to make the camcorder
recording.
Otherwise, select { Cancel } in the menu
and press OK to abort the operation.
F Press CHANNEL +-repeatedly to
select the correct input channel that
matches the connected socket of the
device.
Before you start...
Mark the contents in the temporary
HDD storage (time shift buffer) for which
you wish to record to the HDD, see page
33. Otherwise, all the contents will be
cleared when you start camcorder
recording.
{ CAM 1 } : S-VIDEO or VIDEO
socket at the front.
{ EXT 1 } : EXT1 TO TV-I/O scart
socket at the back.
{ EXT 2 } : EXT2 AUX-I/O scart
socket at the back.
TUNER
G Press REC to start recording and
press PLAY button on the camcorder to
start playback.
To pause the recording, press PAUSE
.
Å
To continue recording, PAUSE
again.
Å
A new chapter marker is created after
recording restarts.
H To stop the recording, press STOP
.
A Connect the camcorder to this recorder
A new title will be created when you
begin another recording.
(see page 23).
B Find the place on the camcorder that you
want to start recording from and set the
camcorder to pause mode.
I To end the recording operation, press
TUNER.
C Turn on the TV to the correct
programme number for the recorder
(e.g. ‘EXT’, ‘0’, ‘AV’).
D Turn on the recorder and press CAM
on the remote control.
A warning message appears.
TIPS: Set the appropriate recording mode. It determines the actual recordable time to the HDD or a
recordable DVD, see page 35.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 45
2005-09-16 2:26:25 PM
Record to Hard Disk or recordable DVD (continued)
D To continue, select to record to { Hard
Recording from an external
device (VCR/DVD player)
Disk } or { Recordable DVD } in the
menu and press OK to confirm.
All the contents in the temporary
HDD storage will be cleared except for
the ‘marked’ recordings.
You can record from an external device
which is connected to this recorder’s
input socket. For copy protected
material, it cannot be recorded on this
recorder.
Otherwise, select { Cancel } in the menu
and press OK to abort the operation.
E Press CHANNEL +-repeatedly to
select the correct input channel that
matches the connected socket of the
device.
IMPORTANT!
It is not possible to record the disc
playback from this recorder to its
HDD.
{ CAM 1 } : S-VIDEO or VIDEO
socket at the front.
{ EXT 1 } : EXT1 TO TV-I/O scart
socket at the back.
TUNER
{ EXT 2 } : EXT2 AUX-I/O scart
socket at the back.
F Start playback on the connected device.
G Press REC to start recording.
To pause the recording, press PAUSE
.
Å
To continue recording, PAUSE
again.
Å
You can use this function to avoid
unwanted recording.
A Connect the external device to this
recorder (see page 20).
A new chapter marker is created after
recording restarts.
B Turn on the TV to the correct
programme number for the recorder
(e.g. ‘EXT’, ‘0’, ‘AV’).
H To stop the recording, press STOP
.
I To end the recording operation, press
C Turn on the recorder and press CAM
on the remote control.
TUNER.
A warning message appears.
Helpful Hint:
– If ‘X’ appears at the bottom of the TV
screen, it means that there is no video signal
received from the current input channel.
TIPS: Set the appropriate recording mode. It determines the actual recordable time to the HDD or a
recordable DVD, see page 35.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 46
2005-09-16 2:26:25 PM
Copy from Hard Disk to recordable DVD
IMPORTANT!
Discs for recording
It is not possible to record the TV
programmes or the scheduled timer
programmes directly to a
recordable DVD. You can only
record it to the HDD and then copy
to a recordable DVD.
Three different types of DVD recordable
discs can be used with this recorder:
– Copy protected (Copy-Once or
Copy-Never) movies and DVD
Videos cannot be dub to the HDD.
DVD±RW (DVD Rewritable)
– Discs that are re-writable can be used
for multiple recordings once existing data
is erased.
About copying
You can copy a recorded title from the
HDD (hard disk drive) to a recordable
DVD.
DVD±R (DVD Recordable)
– Discs can only be used for a single
recording. Each new recording is always
added at the end of all previous
recordings as existing recordings cannot
be overwritten.
– Editing can be done on DVD±R discs
as long as they have not been finalised.
– You can also delete unwanted
recordings. However, the disc space
occupied by the deleted recordings
cannot be recovered for further
recording.
The time required for copying from HDD
to a recordable DVD depends on the
recording mode of the HDD recordings.
It is not possible to change the recording
mode for copying process. It is therefore
important that you choose the
appropriate recording mode when you
set up the recording to the HDD.
The copying process is done at a higher
speed than the recording.
– To play a DVD±R disc on other DVD
players, it must be finalised (see page 69).
After this is done, no more data can be
added to the disc.
HDD Recordable DVD
HDD
Hours of recordings can Time required
be stored in an empty
for copying 1 hour
4.7GB recordable DVD of recording
recording
mode
HQ
SP
SPP
LP
1
2
2.5
3
25 mins
12.5 mins
10 mins
8 mins
EP
4
6 mins
SLP
SEP
6
8
4 mins
3 mins
DVD+R DL (DVD+R Double Layer)
– It contains the same usage as DVD+R,
the only difference is the capacity- 8.5GB.
It offers two recordable layers on a single
DVD disc and are accessible from the
same side of the disc, so recording can
occur completely uninterrupted.
The following information will be stored
on the disc :
– Recording mode
– Title/name of recording
– Date and time of recording
– Index picture of title
TIPS: Ensure that there is sufficient space available on the recordable DVD before recording.
You have to finalise the DVD±R before it can be played on other players, see page 69.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 47
2005-09-16 2:26:26 PM
Copy from Hard Disk to recordable DVD (continued)
E Use keys to select a title to copy.
Copying to a recordable DVD
F Press the Green button on the remote
control for { COPY }.
The making disc copy information
appears.
You can copy any recordings from the
HDD to a recordable DVD. The storage
capacities of the disc depends on the
recording mode that was selected for the
+R
recordings in the HDD, see page 35.
Making Disc copy
Title�
Length�
CH8 10/05-JAN-101
52 min
Before you start...
Available space
Archiving Time
183 min
13 min
Be sure that no other recording is to be
carried out while copying (e.g. timer
recording).
21:00
23:13
START
CANCEL
A Turn on the TV to the correct
programme number for the recorder
(e.g. ‘EXT’, ‘0’, ‘AV’).
If you are using a DVD±RW for
recording, you can press
/
to
B Insert a recordable DVD into the
select the space in the disc where you
want the recording to be placed (e.g. the
space of a deleted title).
recorder.
C Press HDD-BROWSER on the remote
control.
G To start recording, press the Green
button again for { START }.
The content menu appears.
“HDD TO DVD” appears on the
display panel during copying process.
While copying the recordings from
HDD, any interruption to the process
(e.g. power failure) may lead to a bad
disc.
HDD/VIDEO
SORTING�
1/6
SOURCES
Hard Disk
1/3
Recoding Date
Alphabetical
Delete Order
Protected
Disc Tray
Disc Library
Genre
Last Played
Otherwise, press the Yellow button for
{ CANCEL } to abort the operation.
Press INFO will call out the coloured
options at the bottom of the screen.
[BROWSER]
D Press repeatedly until the { TITLES }
and { INFO } menus appear.
Helpful Hints:
HDD
– In some cases, you may not be able to add
new recording to a recordable DVD that
contains recordings from other DVD
recorders.
TITLES�
2/2
INFO�
1-1
ABC 28.02.2005 13:01:00
EFG 31.03.2005 40:22:00
13:01:00
M4
28.02.2005
– In case the newly recorded title in the
HDD is not accessible, turn the recorder off
and on again to recover the recording.
DELETE
COPY
CHILD LOCK
PROTECT
To edit your recordings on the
recordable DVD, see pages 67~71.
TIPS: Ensure that there is sufficient space available on the recordable DVD before recording.
You have to finalise the DVD±R before it can be played on other players, see page 69.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 48
2005-09-16 2:26:29 PM
Using the Disc Library
The Disc Library is an integrated database
in this recorder. It gives you a quick and
easy access to the recordings you have
made onto the recordable DVDs.
Finding a recorded title
To do this, the recorded disc data must
have been stored in the Disc Library. The
appropriate disc does not have to be in
the recorder.
The Disc Library keeps the information
on which video is recorded on which
disc, length of recording and remaining
disc space.
A Press HDD-BROWSER on the remote
control.
B Press to select { Disc Library }, then
Storing the recorded DVD
data in the Disc Library
press to select { SORTING } menu.
C Use keys to select one of the
sorting options.
This recorder will assign the disc a
number, and keep track of what you have
recorded and update the data
automatically whenever you add in new
recording to the disc.
{ Alphabetical } - Lists all the titles
by alphabetical order.
{ Numerical } - Lists all the discs by
numerical order.
D Press repeatedly until the { DISCS }
or { TITLES } and { INFO } menus
appears.
A Press HDD-BROWSER on the remote
control.
B Load in a recordable DVD.
If { TO LIBRARY } appears, it means
this disc has not be added to the Disc
Library.
+R
DISCS
TITLES
001
My Holiday
My Pictures
Celebrations
002
003
+R
SOURCES
Hard Disk
1/3
CONTENT
Video
[BROWSER]
Audio
Photo
Disc Tray
GET TITLE
REMOVE DVD
Disc Library
E Highlight the title you want and press the
Blue button on the remote control for
{ GET TITLE }.
[BROWSER]
TO LIBRARY
A message showing the disc number
appears.
C Press the Blue button on the remote
control for { TO LIBRARY }.
F Load in the appropriate disc and start
The assigned disc number appears and
the disc tray opens automatically
playback.
If the disc library becomes full, you will
have to delete some of the discs data in
order to use the memory for new discs.
Select a disc number from the { DISCS }
menu, then press the Red button for
{ REMOVE DVD }.
D Write the same disc number on the disc
and disc’s cover for easy locating the
appropriate disc next time, then press
OK to exit.
TIPS: Up to 999 discs (or 9000 titles ) can be stored in the disc library.
Maximum titles per disc is 999.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 49
2005-09-16 2:26:32 PM
Playback from Hard Disk
Basic operation
Each recording stored on the HDD is
displayed in the HDD browser with an
index picture.
A Press HDD-BROWSER on the remote
control.
The content menu appears.
B Press repeatedly until the { TITLES }
and { INFO } menus appear.
/
– move to the beginning or previous/
next chapter.
– hold down this button for fast
backward/forward search, press the
button again to increase the search speed
(x4, x8, x32).
HDD
TITLES�
2/2
INFO�
1-1
ABC 28.02.2005 13:01:00
EFG 31.03.2005 40:22:00
13:01:00
M4
28.02.2005
– while in pause mode, start slow
motion playback.
DELETE
COPY
CHILD LOCK
PROTECT
/
C Use keys to select a title and press
– move to the previous/next scene.
PLAY to start playback.
D During playback, you can use the
following buttons on the remote control
to access additional playback features.
JUMP-BACK/JUMP-FWD
– jump backward/forward by a fixed
time period, see page 76.
PAUSE
Å
– view a still picture.
INFO m
– display the Time Shift video bar.
STOP
– stop playback.
TIPS: Press HDD-BROWSER to exit the menu.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 50
2005-09-16 2:26:33 PM
Playback from Hard Disk (continued)
Sorting the titles display
order
Delete/Protect a title in the
HDD
You may organise the titles in a specific
order according to certain criteria for
easy locating the recordings. This order
will remain until you exit the content
menu.
A number of editing options are displayed
at the bottom of the HDD content menu.
They can be accessed via the matching
colour coded buttons on the remote
control.
A Press HDD-BROWSER on the remote
control.
A Press HDD-BROWSER on the remote
control.
The content menu appears.
The content menu appears.
B Press to select the { SORTING }
HDD
TITLES�
2/2
INFO�
1-1
menu.
ABC 28.02.2005 13:01:00
EFG 31.03.2005 40:22:00
13:01:00
M4
HDD
28.02.2005
SORTING�
1/6
TITLES�
1/2
Recoding Date
Alphabetical
Delete Order
Protected
ABC 28.02.2005 13:01:00
EFG 31.03.2005 40:22:00
Genre
DELETE
COPY
CHILD LOCK
PROTECT
Last Played
B Use keys to select a title.
C Press the matching colour coded button
on the remote control to access the
options displayed at the bottom of the
menu.
C Use keys to select one of the
following sorting options.
{ Recording Date }
Lists the titles by the date recorded.
{ DELETE }
Red button – Delete the selected title from
the hard disk.
{ Alphabetical }
Lists the titles by alphabetical order.
{ COPY }
Green button – Copy the selected title from
the hard disk to a recordable DVD.
{ Delete Order }
Lists the titles by deletion order when the
HDD has no or less space for new recordings.
Deletion of title has to be done manually.
{ CHILDLOCK } / { CHLD UNLCK }
Yellow button – Lock or unlock the selected
title from viewing. A four-digit pin code is
required to play the locked disc/title or to
unlock the disc/title (see page 74).
{ Protected }
Lists the titles by protected against deletion.
{ Genre }
Lists the titles by the genre you have specified.
{ PROTECT } / { UNPROTECT }
Blue button – Protect or unprotect the title
against editing or accidental loss of recordings.
{ Last Played }
Lists the titles by the sequence of titles last
played.
TIPS: Press HDD BROWSER to exit the menu.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 51
2005-09-16 2:26:35 PM
Playback from Disc
IMPORTANT!
Playable discs
– It is not possible to record the
disc playback from this recorder to
its HDD.
Using this recorder, you can play and
record on the following discs:
– If the inhibit icon ‘X’ or
appears on the TV screen when a
button is pressed, it means the
function is not available on the
current disc or at the current time.
– DVD discs and players are designed
with regional restrictions. Before
playing a disc, make sure the disc is
for the same zone as your player.
Recording and Playback
DVD±RW (DVD Rewritable);
can be recorded on over and
over and can only be played back
when the recording was made in
‘video mode’.
DVD±R (DVD Recordable);
once the disc is full or finalised,
you cannot record anymore on
the disc. It can only be played
back when the recording was
made in ‘video mode’ and finalised.
Starting disc playback
A Press STANDBY-ON 2to turn on
the recorder.
DVD+R DL (DVD+R Double
Layer); same as DVD±R.
B Press OPEN CLOSE çon the front of
the recorder.
Playback only:
You can also hold down the STOP
button on the remote control to open
and close the disc tray.
DVD Video (Digital Versatile
Disc)
C Carefully place the disc into the tray with
the label facing up, then press OPEN
CLOSE ç.
Audio CD (Compact Disc
Digital Audio)
For double-sided discs, load the side
which you want to play facing up.
Video CD
(Formats 1.0, 1.1, 2.0)
D Turn on the TV to the correct
programme number for the recorder
(e.g. ‘EXT’, ‘0’, ‘AV’).
Super Video CD
CD-R (CD-Recordable)
Audio/Video format or
MP3/JPEG files.
A
E Playback may start automatically.
If not, press HDD-BROWSER to
access the disc content menu. Select a
track/title and press PLAY .
Recordable
CD-RW (CD-Rewritable)
Audio/Video format or
MP3/JPEG files.
A
If the pin code entry dialogue appears on
the TV, this means that the child lock was
activated for the inserted disc, you have
to enter your four-digit pin code (see
page 74).
ReWritable
For more playback features, see pages
56~61.
TIPS: Some discs cannot be played on this DVD recorder due to the configuration and characteristics
of the disc, or due to the condition of recording and authoring software that was used.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 52
2005-09-16 2:26:40 PM
Playback from Disc (continued)
Playing a DVD video disc
Playing a DVD recordable disc
Normally the DVD disc contains a disc
menu. You may have to make your
selection (e.g., subtitle or audio language)
within the disc menu.
A Insert a DVD recordable disc.
The Index Picture screen appears.
TITLES
�
�
2-2
00:22:08
SPP
Static lights
The Pianist
The island of lost dream
14:01:03
01:20:00
SPP
A Insert a DVD.
21:02:03
Lord of the Rings, The T
If the disc menu appears, use the
00:32:02
SPP
Habla Con Ella
The Ring
...
alphanumeric keypad 0-9 to input
your selection or use keys to select
a play option and press OK to confirm.
28:06:03
B Use keys to select a title to play,
To access the content menu
Press DISC-MENU on the remote
control.
then press PLAY .
C To stop playback, press STOP
.
Helpful Hint:
To select the previous or next
chapter/title
During playback, press T/C on the
remote control to select ‘TITLE’ or
– If the message ‘EMPTY DISC’ appears on
the display panel, this means that there are
no recordings on this disc.
‘CHAPTER’, then press
/
.
B To stop playback, press STOP
.
Playing a (Super)Video CDs
(Super) Video CDs may feature the ‘PBC’
(Play Back Control). This allows you to
play the video CDs interactively,
following the menu on the display.
A Insert a (Super) Video CD.
If the disc index menu appears, use the
alphanumeric keypad 0-9 to input
your selection or use keys to select
a play option and press OK to confirm.
To return to the previous menu, press
BACK on the remote control.
B To stop playback, press STOP
.
TIPS: Some discs cannot be played on this DVD recorder due to the configuration and characteristics
of the disc, or due to the condition of recording and authoring software that was used.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 53
2005-09-16 2:26:42 PM
Playback from Disc (continued)
Playing a JPEG image file (slide
show)
Playing an MP3 CD
MP3 (MPEG1 Audio Layer-3) files are
highly compressed music files. It can
contain about 10 times more data (music,
pictures) on a single CD-ROM than a
regular CD.
You can display JPEG pictures in the
selected roll automatically one after the
other at adjustable intervals.
A Insert a JPEG photo CD (CD, DVD±RW,
DVD±R).
A Insert an MP3 CD.
The content menu appears.
The content menu appears.
B Press repeatedly until the { PHOTO
B Press repeatedly until the { ALBUMS }
ROLLS } and { INFO } menus appear.
and { TRACKS } menus appear.
HDD
CD/PHOTO/ROLLS
TITLES�
2/2
INFO�
1-1
PHOTO ROLLS�
Root
1/1
INFO�
ABC 28.02.2005 13:01:00
EFG 31.03.2005 40:22:00
13:01:00
M4
28.02.2005
01.01.2005
50 Photos
DELETE
COPY
CHILD LOCK
PROTECT
TO ALBUM
C Use keys to select the album
C Press PLAY to start the slide show
playback or press OK to show the
thumbnail pictures overview.
and track to play, then press PLAY .
D During playback, you can press
/
to select the next/previous track.
You can edit the displayed photo by
pressing EDIT on the remote control to
access to { Filter } and { Colour Adjust }
settings, or press the matching colour
coded button on the remote control to
zoom, flip or rotate the photo.
E To stop playback, press STOP
.
Helpful Hints:
– Only the first session of a multi-session CD
will be played back.
– Further information on the album, track
and artist will also be displayed on the TV if
this is included in the ID tag.
– If both JPEG pictures and MP3s are in the
same disc, only the JPEG pictures can be
played back.
EDIT PHOTO
Options
Toolbar
Filter
Color Adjust
– This recorder does not support MP3PRO
audio format.
ZOOM
RESET
FLIP
ROTATE
However, the changes cannot be stored
on the HDD or a recordable DVD.
TIPS: Some discs cannot be played on this DVD recorder due to the configuration and characteristics
of the disc, or due to the condition of recording and authoring software that was used.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 54
2005-09-16 2:26:45 PM
Playback from Disc (continued)
Supported JPEG picture formats
File format:
– The file extension has to be ‘*.JPG’ and
not ‘*.JPEG’.
During playback, the available playback
settings are displayed at the bottom of
the screen.
Photo
– It can only display DCF-standard still
pictures or JPEG pictures e.g. TIFF. It
cannot play back moving pictures, Motion
JPEG, progressive JPEG and other
formats, or pictures in formats other
than JPEG, or pictures associated with
sound e.g. AVI-files.
00:01:02
00:00
[EDIT] = Exit
ZOOM
REPEAT
SPEED DOWN SPEED UP
{ ZOOM }
Red button – Select this to activate zoom
mode, the slideshow playback will pause.
– { ZOOM IN } Blue button: enlarge the
picture.
– { ZOOM OUT } Yellow button: revert to
the actual size.
– { END } Red button: exit zoom mode and
continue slideshow playback.
{ REPEAT }
Green button – Select this to toggle between
repeat on and off.
{ SPEED DOWN } / { SPEED UP }
Yellow and Blue buttons – Select this to
change the slideshow playback speed.
– { SLOW }: ten (10) seconds interval
– { MEDIUM }: five (5) seconds interval
– { FAST }: three (3) seconds interval
D To stop playback, press STOP
.
Helpful Hints:
– If both JPEG pictures and MP3s are in the
same disc, only the JPEG pictures can be
played back.
– Some types of JPEG file cannot be played
on this recorder.
– It may require longer time for the recorder
to display the disc content on the TV due to
the large number of songs/pictures compiled
into one disc.
TIPS: Some discs cannot be played on this DVD recorder due to the configuration and characteristics
of the disc, or due to the condition of recording and authoring software that was used.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 55
2005-09-16 2:26:47 PM
Additional Playback Features
Adding photos to an album
Creating a slideshow playlist
(album)
A Insert a JPEG photo CD (CD, DVD±RW,
DVD±R).
The content menu appears.
You can customise the JPEG picture
slideshow playback within a disc by
storing your selection in an album.
B Press repeatedly until the { PHOTO
ROLLS } and { INFO } menus appear.
This recorder can handle up to a
maximum of 100 JPEG pictures in one
album on a recordable disc, depending on
the JPEG file parameters.
C Select a photo roll folder and press OK
to show the thumbnail pictures overview.
Overview Root
A Collect your favourite photos from the
‘PHOTO ROLLS’ and add to an album
for creating a new slideshow playlist.
See “Adding photos to an album”.
50
8
TO ALBUM
B If necessary, edit the photos in the album.
SELECT ALL
SELECT
ROTATE
See “Edit the album”.
C Select the photo album in the menu and
press PLAY to start the slideshow
playback.
D Use keys to select the photo
which you wish to add to the album and
press the Yellow button on the remote
control for { SELECT }.
About Photo Roll/Photo Album
Photo roll is a folder for storing original
JPEG pictures and they are protected. It
is comparable with a conventional 35mm
film for cameras. Rolls will be created
automatically from the digital cameras.
To select all the photos, press the
Green button for { SELECT ALL }.
To rotate the selected photo in 90
degree clockwise increments, press the
Blue button for { ROTATE }.
E Press the Red button on the remote
control for { TO ALBUM }.
The ‘Add to Photo Albums’ menu
appears.
Photo album contains different JPEG
pictures created from the rolls. You can
delete an album without deleting the
pictures of the rolls.
F Create a new album or select an existing
album, then press OK to add the
photo(s) to it.
DVD
CONTENT
Video
�
�
3/3
SORTING
PHOTO ROLLS
PHOTO ALBUMS
Audio
The selected photos are now stored
in the album.
Photo
[BROWSER]
TIPS: Press BACK to go back to previous menu item.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 56
2005-09-16 2:26:51 PM
Additional Playback Features (continued)
To delete the album
Edit the album
Select the album and press the Red
button on the remote control for
{ DELETE }.
You can re-arrange the picture position
in the album in order to create the
desired slideshow playback order, or
remove the photo(s) from the album.
The order and number of the pictures in
the ‘PHOTO ROLLS’ remains unchanged.
D Press OK to show the thumbnail pictures
overview.
Overview Alb0001
A Insert a JPEG photo CD (CD, DVD±RW,
DVD±R).
The content menu appears.
B Press to select the { SORTING }
menu and press to select ‘PHOTO
ALBUMS’.
50
8
REMOVE
MOVE
SELECT
ROTATE
DVD
E Use keys to select the photo
which you wish to move and press the
Yellow button on the remote control
for { SELECT }.
SORTING �
�
PHOTO ALBUMS
Alb0001
PHOTO ROLLS
PHOTO ALBUMS
Alb0002
Alb0003
Alb0004
F Press the Green button on the remote
control for { MOVE }.
[BROWSER]
A ‘navigator’ will appear on the menu,
it enables you to select the position
between the photos.
C Press again to access the { PHOTO
ALBUMS } menu and use keys to
select an album.
G Use keys to move the
‘navigator’ around the menu and press
OK to confirm the position where you
want to insert the photo(s).
To change the album name and date
Select the album and press EDIT on the
remote control. Make the necessary
changes on the respective fields and press
OK and EDIT to exit the menu.
To rotate a photo
Select the photo in the menu and press
the Blue button for { ROTATE }.
EDIT ALBUM INFO
EDIT
To remove a photo from the album
Select the photo in the menu and press
the Red button on the remote control
for { REMOVE }.
Toolbar
Edit Name
Edit Date
Set album name & date.
TIPS: Press BACK to go back to previous menu item.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 57
2005-09-16 2:26:56 PM
Additional Playback Features (continued)
Searching forwards/
backwards
You can fast forward or fast reverse a
disc during playback and select a desired
search speed.
A During playback, hold down
(reverse)
or (forward) until the search speed
status bar (-4X or 4X) appears on the
TV.
The sound will be muted.
Selecting another title/
chapter/ track
B Press the
(reverse) or
(forward)
repeatedly to cycle through the different
search speed (-4X, -8X, -32X, 4X, 8X,
32X).
When a disc contains more than one
track, title or chapter, you can change to
a different track, title or chapter as
follows.
C To resume normal playback, press
PLAY .
During playback,
Pausing playback / slow
motion play
Press
track.
to go to the next title/chapter/
Press
to return to the start of the
A During playback, press PAUSE
to
Å
current title/chapter/track. Pressing
twice can return to the start of the
previous title/chapter/track.
pause playback and display a still picture.
B Hold down (reverse) or (forward)
until the slow motion status bar (-1/8X
or 1/8X) appears on the TV.
The sound will be muted.
OR
Use the alphanumeric keypad 0-9 to
input the title/chapter/track number.
C Press the
(reverse) or
(forward)
OR
repeatedly to cycle through the different
slow motion speed (-1/8X, -1/4X, -1/2X,
1/8X, 1/4X, 1/2X).
Press T/C on the remote control to
select “T” (title) or “C” (chapter), then
press
number.
/
to select the title/ chapter
D To resume normal playback, press
PLAY .
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 58
2005-09-16 2:26:56 PM
Additional Playback Features (continued)
Repeat play
Scan disc
The repeat play options vary depending
on the disc type.
(for CD, VCD, DVD±R/±RW disc only)
This function allows you to preview the
first 10 seconds of each track on the disc.
A During playback, press the Yellow
button on the remote control to select
one of the repeat options.
A During playback, press the Red button
on the remote control.
Repeat chapter (DVD, DVD±R/±RW
only)
The recorder skips to the next track
after 10 seconds of playback.
Repeat track/title
B To resume normal playback, press the
Repeat album/playlist (if applicable)
Repeat entire disc (video CD, audio
CD, DVD±R/±RW only)
Red button again.
Helpful Hint:
– The { SCAN } option is only possible if it
displayed at the bottom of the screen when
you press the SYSTEM on the remote
control.
B To cancel repeat playback, press the
Yellow button repeatedly until the
repeat mode is off or press STOP
.
Repeating a specific segment
(A-B)
Shuffle play
(for CD, MP3 disc only)
You can repeat the playback of a specific
segment within a title/chapter track. To
do this, you must mark the start and end
of the segment you want.
Select shuffle play mode to allow the
recorder to randomly select and play
tracks on the disc.
A During playback, press the Blue button
on the remote control.
A Press the Green button on the remote
control.
This indicates that the start point has
been marked.
It will start playback of all the chapters
within the title in a random order.
B Press the Blue button again to mark the
end of the segment.
B To cancel shuffle playback, press the
Green button again.
A visual marker is placed on the
programme bar.
Playback skips to the start of the
marked segment. The segment is
repeated until the repeat mode is
cancelled.
Helpful Hint:
– The { SHUFFLE } option is only possible if
it displayed at the bottom of the screen
when you press the SYSTEM on the remote
control.
C To cancel repeat playback, press the
[PLAY] [EDIT] [OK] = PLAY
SCAN
SHUFFLE
REPEAT
REPEAT A-B
Blue button once again.
Repeat play
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 59
2005-09-16 2:26:58 PM
Additional Playback Features (continued)
Changing subtitle language
Using theToolbar options
This operation works only on DVDs with
multiple subtitle languages. You can
change the language you want while
playing DVD.
This function can also be accessed via the
Green button on the remote control.
A Press to select { SUBTITLE } and
press to enter its options.
B Press repeatedly until the language
you want is selected, then press to
confirm.
The languages may be numbered or
abbreviated, such as “En” for English.
A During playback, press SYSTEM on the
remote control.
The system setup menu appears.
Helpful Hint:
– Some DVDs discs allow subtitle language
changes only via the DVD disc menu. To
access the disc menu, press DISC-MENU.
B At { Toolbar }, press to select
{ Options }.
The available options might differ
depending on the situation and disc type.
Changing audio soundtrack
language
DVD-VIDEO-TITLE 04|CO1
Options
Toolbar
This operation works only on DVDs with
multiple soundtrack language or VCDs
with multiple audio channel.
This function can also be accessed via the
Red button on the remote control.
Subtitle
Audio
Angle
Zoom
Time search
[PLAY] [EDIT] [OK] = PLAY
AUDIO
SUBTITLE
REPEAT
REPEAT A-B
A Press to select { AUDIO } and press
to enter its options.
C Use keys to select the setting you
want to adjust.
B Press repeatedly until the audio
language you want is selected, then press
to confirm.
Instructions and explanation of the
options are provided in the following
pages.
If the selection in the menu is greyed
out, that means the feature is not
available or not possible to change at the
current state.
The languages may be numbered or
abbreviated, such as “En” for English.
Helpful Hint:
– Some DVDs allow soundtrack language
changes only via the DVD disc menu. To
access the Disc Menu, press DISC-MENU.
D To exit, press SYSTEM.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 60
2005-09-16 2:27:00 PM
Additional Playback Features (continued)
Searching by time
Switching camera angles
This option allows you to skip to a
specific point in the current disc.
This option is only available with DVDs
that contain sequences recorded from
different camera angles. This allows you
to view the picture from different angles.
A Press to select { TIME SEARCH }
and press to enter the time field
(hours : minutes : seconds).
A Press to select { ANGLE } and press
to enter its options.
B Use the alphanumeric keypad 0-9 to
enter the time where playback should
start and press OK to confirm.
The camera angles available for
selection appears.
Playback skips to the time entered.
B Use keys to select the camera
angle you want to switch to, then press
to confirm.
Zooming in
This option allows you to enlarge the
picture on the TV screen and to pan
through the enlarged picture.
A Press to select { ZOOM } and press
to enter zoom in mode.
The zoom status bar appears and
displays the zoom factor.
Zoom 2
END
ZOOM OUT
ZOOM IN
B Press the Blue button on the remote
control to zoom in or Yellow button to
zoom out.
C Use keys to pan through the
zoomed picture.
D To exit zoom mode, press the Red
button.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 61
2005-09-16 2:27:02 PM
Edit Recordings - Hard Disk
Changing the title name
Selecting the genre
Some TV channels transmit the name of
the programme. In this case, the
programme name will automatically be
stored when recording to the HDD.
You may select the genre type provide in
the list for easy and fast searching of a
recorded title.
A Press HDD-BROWSER on the remote
control, then press repeatedly until
the { TITLES } and { INFO } menus
appear.
Otherwise, only the programme number
and date/time of the recording will be
stored as title name.
A Press HDD-BROWSER on the remote
control, then press repeatedly until
the { TITLES } and { INFO } menus
appear.
B Use keys to select a title and press
EDIT on the remote control.
The HDD edit menu appears.
HDD
HDD
Title name
TITLES�
2/2
INFO�
1-1
Genre
Sport
ABC 28.02.2005 13:01:00
EFG 31.03.2005 40:22:00
13:01:00
M4
28.02.2005
Video edit
C Select { Genre } in the menu and press
B Use keys to select a title and press
EDIT on the remote control.
.
D Use keys to select a genre type and
The HDD edit menu appears.
press OK to confirm.
HDD
Title name
Genre
P01 28.03.05 12:04
Video edit
C Select { Title name } in the menu and
press .
D Use keys to change the character/
number or make an entry by using the
alphanumeric keypad 0-9.
Use keys to move to the
previous or next field.
To switch between upper and lower case
characters, press a/A on the remote
control.
To clear the title name, press the Red
button on the remote control for
{ CLEAR }.
E Press OK to confirm the changes.
TIPS: No editing can be carried out on a protected title, see page 51.
Press BACK to go back to previous menu item. Press EDIT to exit the menu.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 62
2005-09-16 2:27:05 PM
Edit Recordings - Hard Disk (continued)
PAUSE
HDD
Video editing
This recorder allows you to edit the
video content after a recording has been
made. You can insert/delete chapter
markers or hide unwanted scenes.
00:01:02
00:00
[EDIT] = Exit
NO CHAPTER
CHAPTER
DIVIDE
HIDE
When you play back a recording in video
edit mode, the entire recording will be
played back including the hidden scenes.
Video bar:
In the video bar, the record playback head
represents the actual position of the playback.
D Press the matching colour coded button
on the remote control to access the
options displayed at the bottom of the
menu.
Explanation of the options are
provided in the following pages.
{ NO CHAPTER }
Red button – Select this to erase all the
chapter markers in the current title.
A Press HDD-BROWSER on the remote
control.
{ CHAPTER }
Green button – Select this to access
chapter editing menu.
– { MERGE } : combine two chapters.
– { BACK } : return to the previous screen.
– { SPLIT } : insert a chapter marker.
The HDD content menu appears.
B Use keys to select a title and press
EDIT on the remote control.
The HDD edit menu appears.
HDD
Title name
Genre
{ DIVIDE }
Yellow button – Select this to divide the
recording into two separate titles.
Video edit
Edit
{ HIDE } / { STOP HIDE }
Blue and Green buttons – Select this to
define the scene to hide.
CLEAR
{ SHOW } / { STOP SHOW }
Blue and Green buttons – Select this to
make the hidden scene visible.
C Select { Video edit } in the menu and
press .
Playback will start automatically.
E To exit, press EDIT.
TIPS: No editing can be carried out on a protected title, see page 51.
Press BACK to go back to previous menu item. Press EDIT to exit the menu.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 63
2005-09-16 2:27:09 PM
Edit Recordings - Hard Disk (continued)
{ MERGE }
Select this to merge the current chapter
with the chapter before it.
If the two chapters were hidden, then
the joined chapter will also be hidden.
Merge/split a specific chapter
within a recording
You can create a chapter by inserting
chapter marker (using the SPLIT option)
or remove a chapter marker (using the
MERGE option).
Title
Chapter 1 Chapter 2 Chapter 3 Chapter 4
A During HDD recording playback, press
EDIT on the remote control.
Chapter 1
Chapter 2 Chapter 3
B Press the Green button on the remote
control for { CHAPTER }.
(for example, chapter 2 is being selected)
The chapter editing menu appears.
{ BACK }
PAUSE
HDD
Select this to return to the previous
screen.
{ SPLIT }
Select this to insert a new chapter
marker at the current point of playback.
This will allow you to access a specific
point in the recording easily or set a
chapter you wish to hide (for example,
commercial scenes).
00:01:02
DIVIDE
SPLIT
00:00
[EDIT] = Exit
NO CHAPTER
CHAPTER
HIDE
MERGE
BACK
Title
C Hold down
/
keys or use /
Chapter 1 Chapter 2 Chapter 3 Chapter 4
keys on the remote control to search for
the scene you want to edit, then press
Chapter Chapter
Chapter 1
Chapter 3 Chapter 4
2a
2b
PAUSE
.
Å
(for example, chapter 2 is being selected)
D Press the matching colour coded button
on the remote control to access the
options displayed at the bottom of the
menu.
Helpful Hint:
– There is a limit on chapter markers that
can be stored within a title and the hard disk
drive.
TIPS: No editing can be carried out on a protected title, see page 51.
Press BACK to go back to previous menu item. Press EDIT to exit the menu.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 64
2005-09-16 2:27:13 PM
Edit Recordings - Hard Disk (continued)
Dividing titles
Hiding unwanted scenes
You can divide a title into two or more
titles. You can use this function to
separate and delete undesired portions of
a recording, such as commercials.
You can choose to hide certain scene for
playback (e.g. skipping a commercial
scene) or make the hidden scene visible
again.
WARNING!
A During HDD recording playback, press
Once a title has been divided, it
cannot be reversed.
EDIT on the remote control.
B Hold down
/
keys or use /
keys on the remote control to search for
the scene you want to edit, then press
A During HDD recording playback, press
EDIT on the remote control.
PAUSE
.
Å
PAUSE
HDD
C Press the Blue button on the remote
control for { HIDE }.
It will set the start marker for hide.
PAUSE
HDD
00:01:02
00:00
[EDIT] = Exit
NO CHAPTER
CHAPTER
DIVIDE
HIDE
00:01:02
B Hold down
/
keys or use /
00:00
[EDIT] = Exit
NO CHAPTER
keys on the remote control to search for
the scene you want to edit, then press
CHAPTER
DIVIDE
HIDE
PAUSE
.
Å
STOP HIDE
CANCEL
C Press the Yellow button on the remote
control for { DIVIDE }.
D Hold down
key on the remote
A new title and new index picture will
be created from the current point of
playback.
control to search for the end of the
scene to hide, then press the Green
button for { STOP HIDE }.
It will set the end marker for hide.
Title1
Title 2
The ‘hidden’ area will be greyed out.
Title1
Title2
Title 3
Otherwise, cancel the operation by
pressing the Blue button on the remote
control for { CANCEL }.
(for example, title 1 is being selected)
E To exit, press EDIT.
TIPS: No editing can be carried out on a protected title, see page 51.
Press BACK to go back to previous menu item. Press EDIT to exit the menu.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 65
2005-09-16 2:27:17 PM
Edit Recordings - Hard Disk (continued)
Showing the hidden scene
Deleting all chapter markers
During recording, the chapter marker is
set automatically at a specific interval if
the function is active (see page 35).
You can choose to delete all the chapter
markers when the recording has finished.
A During playback, press EDIT on the
remote control.
While in video editing mode, the
hidden chapter will play.
PAUSE
HDD
A During HDD recording playback, press
EDIT on the remote control.
Hidden
scenes
PAUSE
HDD
00:01:02
00:00
[EDIT] = Exit
NO CHAPTER
CHAPTER
DIVIDE
SHOW
STOP SHOW
CANCEL
00:01:02
00:00
[EDIT] = Exit
NO CHAPTER
B Press the Blue button on the remote
control for { SHOW }, it will mark the
beginning of scene to show.
CHAPTER
DIVIDE
HIDE
C Hold down
key on the remote
B Press the Red button on the remote
control for { NO CHAPTER }, it will
delete all the chapter markers in the
current title.
control to search for the end of the
scene to show, then press the Green
button for { STOP SHOW }.
Otherwise, cancel the operation by
pressing the Blue button on the remote
control for { CANCEL }.
Helpful Hints:
– All the hidden chapters will be played back
while in video editing mode.
– The selection of scenes to hide or show
can only be done within a title.
TIPS: No editing can be carried out on a protected title, see page 51.
Press BACK to go back to previous menu item. Press EDIT to exit the menu.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 66
2005-09-16 2:27:20 PM
Edit Recordings - Recordable DVD
About editing recordable
Index Picture screen
DVDs
The Index Picture screen shows your
recordings on a recordable DVD. It
should appear on the TV once you load
in a recordable DVD or when playback is
stopped.
This recorder offers various disc edit
options. You can change the disc content
and settings of a recorded DVD from the
editing menu. If a DVD±R has been
finalised, it cannot be edited. The edited
contents may not be available if you play
the disc on another DVD player.
A
TITLES
�
�
2-2
00:22:08
SPP
B
Static lights
The Pianist
The island of lost dream
14:01:03
01:20:00
SPP
21:02:03
Lord of the Rings, The T
00:32:02
SPP
Habla Con Ella
The Ring
...
28:06:03
C
An Index Picture screen represents each
recording information saved :
A
Title’s index picture.
B
Length of recording, recording mode and
date of recording
C
Title’s name (or channel number and date)
The displayed options in the editing menu
differ depending on the situation and disc
type.
– Change disc name
– Make DVD compatible (DVD±RW
only)
Helpful Hint:
– If the disc is not recorded from this
recorder, the format of index picture screen
might be different. You have to adapt the
disc menu to the format of this recorder
before editing, see page 73.
– Finalise disc (DVD±R only)
– Change title name
– Video editing
+RW
Disc name
Compatible
Finalise
Title name
Video edit
CLEAR
TIPS: No further recording and editing can be carried out on a finalised DVD±R.
Press BACK to go back to previous menu item. Press EDIT to exit the menu.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 67
2005-09-16 2:27:22 PM
Edit Recordings - Recordable DVD (continued)
Deleting recordings/titles
Protecting the recorded titles
(DVD±RW)
You can delete a specific title from the
disc. However, for DVD±R disc, the
deleted space cannot be used for further
recordings.
You can choose to protect the recorded
title on a DVD±RW in order to prevent
the recordings from being accidentally
erased or edited.
A Insert a recorded DVD into the
recorder.
A Insert a recorded DVD±RW into the
recorder.
The Index Picture screen appears.
If not, press DISC-MENU.
The Index Picture screen appears.
If not, press DISC-MENU.
B Use keys to select a title from the
menu.
B Use keys to select a title from the
menu.
TITLES
�
�
2-2
00:22:08
SPP
Static lights
The Pianist
The island of lost dream
14:01:03
C Press the Blue button on the remote
01:20:00
SPP
control for { PROTECT }.
21:02:03
Lord of the Rings, The T
00:32:02
SPP
Once the title has been protected, the
Blue button option will change to
{ UNPROTECT }. Select this to cancel
the protect setting if required.
Habla Con Ella
The Ring
...
28:06:03
DELETE
PROTECT
DELETE
PROTECT
UNPROTECT
C Press the Red button on the remote
control for { DELETE }.
D A warning message appears. Press OK on
the remote control to proceed.
For DVD±RW disc, ‘Empty Title’ will
appear in the Index Picture screen where
the title was deleted. The empty space
can be used for new recordings.
For DVD±R disc, ‘Deleted title’ will
appear in the Index Picture screen where
the title was deleted. During playback,
the deleted title will be skipped.
Otherwise, select { Cancel } in the menu
and press OK to abort the operation.
TIPS: No further recording and editing can be carried out on a finalised DVD±R.
Press BACK to go back to previous menu item. Press EDIT to exit the menu.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 68
2005-09-16 2:27:25 PM
Edit Recordings - Recordable DVD (continued)
C Use keys to select { Compatible }
Changing the disc/title name
in the menu and press OK to confirm.
If the option is not available for
The original disc/title name is generated
selection, it means that the disc is already
automatically by the recorder. You can
compatible.
change the disc/title name by following
the steps below.
Finalising the DVD±R for
playback
A Insert a recorded DVD into the
recorder.
The Index Picture screen appears.
If not, press DISC-MENU.
It is necessary to finalise a DVD±R disc
before you can play it on another DVD
player. Otherwise, the DVD±R will only
play back on this recorder.
B Press EDIT on the remote control.
The editing menu appears.
C Use keys to select { Disc name }
After a DVD±R disc has been
finalised, no further recordings or
editing can be made to it. Make sure
that you have completed all the
recordings and editing before
finalising the disc.
or { Title name } in the menu.
D Use keys to change the character/
number or make an entry by using the
alphanumeric keypad 0-9.
Use keys to move to the
previous or next field.
A Insert a recorded DVD±R into the
To switch between upper and lower case
characters, press a/A on the remote
control.
recorder.
B Press EDIT on the remote control.
The edit menu appears.
E Press OK to confirm the changes.
C Use keys to select { Finalise } in
the menu and press OK to confirm.
Making the edited DVD±RW
compatible
D A warning message appears. Press OK on
the remote control to proceed.
Finalisation may take more than 30
minutes, depending on the length of
recordings.
The edited DVD±RW may still display
the original titles or hidden scenes when
played back on other DVD players. This
function allows you to make an edited
DVD±RW compatible with other players.
Do not try to open the disc tray or
turn the power off as this may render the
disc unusable.
Otherwise, select { Cancel } in the menu
and press OK to abort the operation.
A Insert a recorded DVD±RW into the
recorder.
B Press EDIT on the remote control.
The editing menu appears.
TIPS: No further recording and editing can be carried out on a finalised DVD±R.
Press BACK to go back to previous menu item. Press EDIT to exit the menu.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 69
2005-09-16 2:27:26 PM
Edit Recordings - Recordable DVD (continued)
E Press the matching colour coded button
Video editing
on the remote control to access the
options displayed at the bottom of the
This recorder allows you to edit the video
menu.
content after a recording has been made.
You can add/delete chapter marker or
hide unwanted scenes.
Title
Chapter Chapter Chapter Chapter
chapter markers
{ NO CHAPTER }
Red button – Select this to erase all the
chapter markers in the current title.
When you play back a recording in video
edit mode, the entire recording will be
played back including the hidden scenes.
{ CHAPTER }
Green button – Select this to access
chapter editing menu.
A Insert a recorded DVD into the
recorder.
[EDIT] = Exit
The Index Picture screen appears.
If not, press DISC-MENU.
NO CHAPTERS CHAPTER
TITLE
SPLIT
HIDE
HIDE
MERGE
BACK
B Use keys to select a title and press
PLAY to start playback.
{ MERGE }
C Hold down
/
keys or use /
Select this to merge the current chapter
with the chapter before it.
Note: If the two chapters were hidden,
then the joined chapter will also be hidden.
keys on the remote control to search for
the scene you want to edit, then press
PAUSE
.
Å
D Press EDIT on the remote control.
{ BACK }
Select this to return to the previous
screen.
The video editing menu appears.
PAUSE
+RW | SHREK | EDIT MODE
{ SPLIT }
Select this to insert a new chapter marker
at the current point of playback. This will
allow you to access a specific point in the
recording easily or set a chapter you wish
to hide.
00:01:02
00:00
[EDIT] = Exit
NO CHAPTERS CHAPTER
TITLE
HIDE
{ HIDE } / { SHOW }
Select this to hide or show the current
chapter. During playback, the hidden
chapter will be skipped.
TIPS: No further recording and editing can be carried out on a finalised DVD±R.
Press BACK to go back to previous menu item. Press EDIT to exit the menu.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 70
2005-09-16 2:27:31 PM
Edit Recordings - Recordable DVD (continued)
{ TITLE }
Yellow button – Select this to access title
editing menu.
[EDIT] = Exit
NO CHAPTERS CHAPTER
TITLE
HIDE
DIVIDE
BACK
INDEX PIC.
{ DIVIDE } - for DVD±RW only
Select this to create a new title from the
current point of playback. The existing title
will be divided into two titles.
Warning! Once a title has been divided, it
cannot be reversed.
{ BACK }
Select this to return to the previous screen.
{ INDEX PIC }
Select this to use the current scene as the
index picture.
Note: In the Index Picture screen, normally
the first frame of a recording is shown as
the title’s index picture.
{ HIDE } / { SHOW }
Blue button – Select this to hide or show
the current chapter.
Helpful Hints:
– All the hidden chapters will be played back
while in video editing mode.
– The selection of scenes to hide or show can
only be done within a title.
– There is a limit on chapter markers that
can be stored within a title and the hard disk
drive.
TIPS: No further recording and editing can be carried out on a finalised DVD±R.
Press BACK to go back to previous menu item. Press EDIT to exit the menu.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 71
2005-09-16 2:27:34 PM
System Menu Options
Recorder Preferences
Sound
Preferences
Sound mode
Night mode
see page 73
Disc
Preferences
Adapt menu
Delete all
see page 73
A Press SYSTEM on the remote control.
The system setup menu appears.
B Press to select { Preferences } and
press repeatedly to view the available
setup options, then press to access.
Access
Preferences
Child lock
Recording Sound Disc
Access
Preferences
Setup
Change pin
see page 74
Features
Preferences
Auto resume
C Select the setting you wish to change and
press . Once you have changed the
setting, press OK to confirm and back to
the previous selected item.
see page 74
Instructions and explanation of the
options are provided in the following
pages.
If the selection in the menu is greyed
out, that means the feature is not
available or not possible to change at the
current state.
D To exit, press SYSTEM.
Note:
For { Recording }, see page 35.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 72
2005-09-16 2:27:41 PM
System Menu Options (continued)
Sound settings (underlined options are the factory default settings)
Sound mode
This setting is only required if you used the recorder’s AUDIO OUT L/R
sockets to connect other audio/video device.
{ Stereo }
– Select this to hear the sound from the left and right
audio channels. Use this setting when this recorder
is connected to a TV or Stereo system.
{ Surround }
– Select this if the connected audio/video device is
compatible with Dolby Surround. Dolby Digital and
MPEG-2 multi-channel are mixed to a Dolby
Surround compatible two-channel output signal.
Night mode
This mode optimises playback of sound at low volume. High volume
outputs will be softened and low volume outputs are brought upward to
an audible level.
{ On }
– Turns on night mode.
{ Off }
– Turns off night mode feature. Selects this to enjoy
the surround sound with its full dynamic range.
Disc settings
Adapt menu
If a DVD±RW has been recorded in a computer drive or in another
recorder, the Picture Index screen may not be displayed correctly.This
feature allows you to change the format of the disc to ‘Philips’ type.
Once you press OK, a message to confirm your action will appear on the
TV.
Delete all
Select this to delete all the recordings from the current recordable DVD.
Once you press OK, a message to confirm your action will appear on the
TV.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 73
2005-09-16 2:27:41 PM
System Menu Options (continued)
Access settings (underlined options are the factory default settings)
You will be prompted to enter the four-digit pin code.
–
When doing this for the first time, use the alphanumeric keypad 0-9
on the remote control to enter any four-digit pin code you prefer.
If you forget your four-digit pin code, key in ‘1504’.Then enter any
four-digit you prefer and enter the same pin code again to confirm it.
–
Childlock
With this feature, you can prevent children from viewing certain discs or
the recorded titles in the HDD. When this feature is enabled, it will
appear as { CHILDLOCK } at the bottom of the coloured options screen
whenever you select a title in the content menu. You can press the
YELLOW button on the remote control to set the childlock on or off.
Note: This recorder can memorise settings for 50 discs.
{ On }
–
Turns on child lock function.
A four-digit pin code must be entered in order to play
the locked disc or title in the HDD.
All discs can be played.
{ Off }
–
Change pin
Use the alphanumeric keypad 0-9 to enter your new four-digit pin code.
You must enter the same pin code again to confirm it.
To cancel your change, press to select { Cancel } in the menu and
press OK on the remote control.
Please enter New Pin
New Pin
Pin Code
****
Cancel
Features settings (underlined options are the factory default settings)
Auto resume
With this feature, you can resume playback of the disc from its last
stopped point.This applies to the last 20 DVDs andVideo CDs you played.
{ On }
{ Off }
–
–
Turns on auto resume mode.
The disc will always start from the beginning when you
load in a disc or start playback.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 74
2005-09-16 2:27:49 PM
System Menu Options (continued)
System
Setup
Recorder Setup
Eco mode
Second RC
OSD
Off
Before you start...
Off
see page 76
Mark the contents in the temporary HDD
storage (time shift buffer) for which you
wish to record to the HDD, see page 33.
Otherwise, all the contents will be cleared
when you access the { Setup } option.
Full
Bright
Display
Time-date
Setup
Clock preset
Time
see page 77
Date
Analogue Ch.
Video output
Audio output
Language
Setup
A Press SYSTEM on the remote control.
Auto search
Follow TV
Sort
The system setup menu appears.
see page
78~79
B Press repeatedly to select { Setup }
and press .
Favourites
A warning message appears. Press OK
to continue or select { No } in the menu
to abort the operation.
Playback will pause.
Setup
TV shape
Black level
Horizontal
�
System Time-date Analogue Ch. Video output
Setup
see page 77
Video output
Progressive �
Setup
Digital output
C Press repeatedly to view the available
setup options, then press to access.
Instructions and explanation of the
options are provided in the following
pages.
see page 80
If the selection in the menu is greyed
out, that means the feature is not
available or not possible to change at the
current state.
Set up
Menu
see page 80
Audio
Subtitle
D To exit, press SYSTEM.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 75
2005-09-16 2:28:00 PM
System Menu Options (continued)
System settings (underlined options are the factory default settings)
Eco mode
This is an energy saving mode.
{ On }
– When switching the recorder to standby mode, the
display panel will turn blank to save power.
Note: When this mode is active, automatic SAT
(satellite) recording is not possible.
{ Off }
– Clock will display on the recorder’s display panel
when switching off to standby mode.
Second RC
OSD
{ On }
– Enables control of this recorder with a second
remote control (not supplied).
– Disables second RC control function.
{ Off }
Select the level of On-screen display information.
{ Full }
– Complete information is always displayed during
use.
{ Reduced }
{ Normal }
– The help text and colour button bar will be
removed from the display.
– The help-text will be removed from the menu.
Display
Select the brightness of the recorder display panel.
{ Bright }
{ Dimmed }
{ Off }
– Normal brightness.
– Medium brightness.
– Turns off the display.
Jump forward
Jump back
Set the amount of time you want to skip ahead in tuner mode when you
press the JUMP-FWD button on the remote control, press OK to
confirm the setting. The maximum setting is 60 minutes.
Set the amount of time you want to skip backwards in tuner mode when
you press the JUMP-BACK button on the remote control, press OK to
confirm the setting. The maximum setting is 60 minutes.
Version Info
This is only an information screen that shows the current version of
firmware installed in your recorder. You may require this information for
future online firmware upgrade.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 76
2005-09-16 2:28:01 PM
System Menu Options (continued)
Time-Date settings (underlined options are the factory default settings)
Clock preset
The time/date can be set automatically to this recorder if the storedTV
channel transmits time signal.
{ Auto }
– The recorder will automatically detect the first
available channel which is transmitting the time/date
information.
{ XXX }
(preset number)
{ Off }
– Select the TV channel to use for transmitting
the time/date information.
– Select this before setting the time/date manually.
If the time/date is incorrect, you must manually set the time/date here.
Time
Date
{ 00 : 00 }
– Use keys to set the hours and minutes, press
to move to the next digit field. Once complete,
press OK.
{ 31-01-2005 }
– Use keys to set the day, month and year,
press to move to the next digit field. Once
complete, press OK.
Video settings (underlined options are the factory default settings)
TV Shape
The picture shape can be adjusted to fit yourTV.
{ 4:3 Letterbox } – For a ‘wide-screen’ display with black bars on the
top and bottom.
{ 4:3 PanScan } – For a full-height picture with the sides trimmed.
{ 16:9 }
– For wide-screen TV (frame ratio 16:9).
Black Level
Adapts the colour dynamic for NTSC disc.
{ Normal }
– Normal colour contrast.
{ Enhanced }
– Improves the colour contrast and brighten the
picture of
NTSC-compatible DVD.
Horizontal
Use keys to adjust the horizontal position of the picture on yourTV
screen, press OK to confirm the setting.
Video Output
Chooses the type of video output that matches the video connection
between this recorder and yourTV.
{ RGB•CVBS } – For RGB or CVBS connection.
{ S-Video }
– For S-Video connection.
{ Automatic }
– The output setting will automatically follow the
video signal received.
Progressive
Before enabling the progressive scan feature, you must ensure that yourTV
can accept progressive signals (a progressive scanTV is required) and you
have connected the recorder to yourTV using theY Pb Pr (see page 17).
{ On }
{ Off }
– Turns on progressive scan mode.
– Disables the progressive scan mode.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 77
2005-09-16 2:28:01 PM
System Menu Options (continued)
Analogue Channel settings
Although this recorder selects all the available analogueTV channels
Analogue Ch.
during basic installation, you may want to repeat the process later if more
channels become available in your area or if you are reinstalling the
recorder.
Setup
Auto search
Follow TV
Sort
A Press SYSTEM on the remote control. Select { Setup } in the menu
and press repeatedly to select { Analogue Ch. }.
Favourites
B Press repeatedly to select the following settings in the menu and
press to enter its options.
Auto search
Follow TV
Press OK on the remote control to start automaticTV channel search
process and replace all previously stored analogueTV channels.This
process may take several minutes.
This feature is only available if you have connected this recorder to your
TV using the EXT1TOTV-I/O scart socket. It allows you to change the
order of theTV channels stored in your recorder to match the order on
theTV.
1) Press OK to confirm the message on the TV, ‘TV 01’ will appear on
the display panel. Use the TV’s remote control to select
programme number {1} at your TV, then press OK on the recorder’s
remote control.
– If the recorder finds the same TV channel as on the TV, it stores it
as ‘P01’. ‘TV 02’ will then appear on the display panel.
– If no video signal is received from the TV, ‘NO TV’ will appear.
2) Use the TV’s remote control to select programme number {2} at
your TV, then press OK on the recorder’s remote control.
Repeat the above steps until you have assigned all the TV channels.
Note: Press BACK will interrupt the follow TV process.
Sort
You may not agree with the sequence in which the individualTV channels
have been allocated to the programme numbers.You can use this setting
to rearrange theTV channels.
001 ARD
004 TELET
005 CHAN
006 RTL4
007 SBS6
004 CHAN
005 RTL4
006 ORF2
007 SBS6
002 TELET
003 ORF2 ---
004 TELET
ORF2
ORF2
1) Use keys to select the TV channel that you want to move and
press OK to confirm.
2) Use keys to shift the TV channel to the desired position and
press OK to place the TV channel at the current position.
Favourites
Press OK to mark your favouriteTV channels for quick access by using
the channel up/down button on the remote control.
– The TV channels can be accessed using the
CHANNEL + − on the remote control.
– The TV channels can only be accessed by pressing
the corresponding number button on the remote
control.
Favourites
CH01
CH02 NBC
CH03
CH04
CH05
CH06 MTV
CH07
78
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 78
2005-09-16 2:28:03 PM
System Menu Options (continued)
Analogue Channel settings - Manual Search
In some cases, not all of the availableTV channels may have been found
and stored during basic installation. In this case, you will need to search
for and store the missing or codedTV channels manually.
Analogue Ch.
MHz
Setup
Entry mode
Entry
167.5 MHz
Preset
P 04
A Press SYSTEM on the remote control. Select { Setup } in the menu
Preset name
RTL4
and press repeatedly to select { Analogue Ch. }.
Decoder
TV system
Nicam
Off
On
On
B Press repeatedly to select the following settings in the menu and
PAL-BG
Off
press to enter its options.
Fine t une
STORE
SEARCH
Entry Mode
Entry
Select manual search based on channel allocation or frequency entry
{ Channel, S. Channel (Special channel), MHz (frequency) }.
Note: S. Channel refers to specified hyperband channels.
–
–
Use the alphanumeric keypad 0-9 to enter the frequency/channel
number, press OK and the Green button for { STORE }.
OR
Press the Blue button on the remote control for { SEARCH }, once
you have found the correct frequency/channel, press the Green
button for { STORE }.
Preset
Use the alphanumeric keypad 0-9 to enter the preset channel number
for the channel to store (e.g.,‘01’), press OK and the Green button for
{ STORE }.
Preset name
Decorder
Use the alphanumeric keypad 0-9 to enter the preset channel name,
press OK and the Green button for { STORE }.
Maximum four characters for preset channel name.
If the currentTV channel is transmitted by codedTV signals that can only
be viewed properly with a decoder which is connected to the
EXT2 AUX-I/O socket, you need to activate the connected decoder.
{ On }
–
Select this to allocate the connected decoder to this
TV channel.
{ Off }
–
Turns off the decoder feature.
TV system
NICAM
Set theTV system that produces the least distortion of picture and sound.
See pages 178~179 “TV System Guide” for more information.
NICAM is a digital sound transmission system. It can transmit either one
stereo channel or two separate mono channels.
{ On }
{ Off }
–
–
Improves the sound transmission of the TV channel.
Select this if the reception is poor and the sound is
distorted.
Fine tuning
Select this to fine-tune theTV channel manually if the reception is poor.
Use keys to adjust the frequency and press OK to confirm.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 79
2005-09-16 2:28:05 PM
System Menu Options (continued)
Audio Output settings (underlined options are the factory default settings)
Digital output
This setting is only required if you are using the recorder’s COAXIAL/
OPTICAL OUT socket to connect other audio/video device.
{ All }
–
Select this if the connected device has a built-in Multi-
Channel decoder that supports one of the multi-
channel audio format (Dolby Digital, MPEG-2).
Select this if the connected device is not capable of
decoding multi-channel audio. The system will convert
the Dolby Digital and MPEG-2 multi-channel signals to
PCM (Pulse Code Modulation).
{ PCM }
–
{ Off }
–
Select this to deactivate the digital audio output. For
example, if you use the AUDIO OUT sockets to
connect this recorder to a TV or Stereo system.
Language settings
Menu
Select the menu language for this recorder on-screen display. This setting
will be taken from the basic installation.
Audio
Select the preferred audio language for DVD playback.
Select the preferred subtitle language for DVD playback.
Subtitle
Helpful Hints:
– If the selected audio/subtitle language is not available on the disc, the disc’s
default language will be used instead.
– For some DVDs, the subtitle/audio language can only be changed via the DVD
disc menu.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 80
2005-09-16 2:28:05 PM
Firmware Upgrade
Installing the latest firmware
Periodically Philips will issue upgrades for
the firmware that was initially installed in
your recorder as the firmware is
continuously refined for greater stability
and compatibility of the recorder.
CAUTION! Power supply must not be
interrupted during upgrade!
System
Setup
Jump forward
Jump back
mm : ss
mm : ss
Version Info
A Get the version information of this
recorder by pressing SYSTEM on the
remote control and select { Setup } >
{ System } > { Version Info } in the
menu.
Write down the information of your
current software version.
support’ to check the availability of latest
firmware upgrade. Download the
software programme to a CD-ROM.
C Press OPEN CLOSE çon the front
of the recorder to open the disc tray.
D Insert the CD-ROM and press OPEN
CLOSE çagain.
The firmware will start to install on
the recorder automatically.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 81
2005-09-16 2:28:05 PM
General Information
E Read the instructions on the TV and
confirm your action by pressing OK.
The setup is now completed and you
can start enjoy the high quality picture.
Setting up Progressive Scan
feature
(for Progressive Scan TV only)
Otherwise, select { Cancel } and press
OK to go back to the previous menu.
The progressive scan displays twice the
number of frames per seconds than
interlaced scanning (ordinary normal TV
system). With nearly double the number
of lines, progressive scan offers higher
picture resolution and quality.
F To exit the menu, press SYSTEM.
If no picture:
A Disconnect the recorder’s ~MAINS from
the power supply.
Before you start...
– Ensure that you have connected this
recorder to a progressive scan TV using
the Y Pb Pr connection (see page 17).
– Ensure that you have completed the
basic installation and set-up.
B Hold down
on the recorder whilst
reconnect its ~MAINS to the power
supply.
Helpful Hint:
– There are some progressive scan TVs and
High-Definition TVs that are not fully
compatible with this unit, resulting in the
unnatural picture when playing back a DVD
VIDEO disc in the progressive scan mode. In
such a case, turn off the progressive scan
feature on both the recorder and your TV.
A Turn on the TV to the correct
programme number for the recorder
(e.g. ‘EXT’, ‘0’, ‘AV’).
B Turn on the recorder and press
SYSTEM on the remote control.
The system setup menu appears.
C Press to select { Setup } and press
to select { Video output }.
Copyright notice
A warning message appears. Press
OK to continue.
The making of unauthorised copies of
copy-protected material, including
computer programmes, files, broadcasts
and sound recordings, may be
infringement of copyrights and constitute
a criminal offence. This equipment
should not be used for such purposes.
Video output
Setup
TV shape
�
Black level
Horizontal
Video output
Progressive �
On
D Press to highlight { Progressive } and
press to access. Press to select
{ On }.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 82
2005-09-16 2:28:05 PM
Frequently Asked Questions
What kind of disc should I use for
recording?
What are Titles and Chapters?
A DVD disc contains Titles and Chapters,
which are similar to the Titles and Chapters of
a book. A Title is often a complete movie and
is broken down into Chapters, or individual
scenes from the movies.
You can only record on DVD±R, DVD±RW
or DVD+R DL discs. DVD±R/±RW is the
most compatible recordable DVD format in
the market today. They are fully compatible
with most of the existing DVD-Video players
and DVD-ROM drives in computers.
Title
Chapter Chapter Chapter Chapter
What is the capacity of a DVD±R
and DVD±RW?
chapter markers
4.7GB, or equivalent to six CDs. You can
store only one hour of recording on a single
disc at the highest quality (DVD standard) and
about 8 hours recording at the lowest quality
(VHS standard).
Programmes are recorded as a single title.
They may consist of one chapter or a few
chapters within a title, depending on the
recording settings.
What is the difference between
DVD±R and DVD±RW?
How do I set up Titles and
DVD±R is “recordable” and DVD±RW is
“erasable” and “rewritable”. With a DVD±R,
you can record multiple sessions on the same
disc. But when the disc is full, you cannot
record any more on the disc. The DVD±RW
allows you to record over the same disc
literally hundreds of times.
Chapters?
The recorder will automatically create a new
Title every time you start a new recording.
You can then add Chapters to these
recordings manually or have them
automatically inserted at a specific intervals.
What does “finalising” a disc do?
Finalising a disc locks the disc so it can no
longer be recorded. This is only required for
DVD±R. It will then be compatible with
virtually any DVD player. To close a disc
without finalising it, simply stop recording and
eject the disc. You will still be able to record
on the disc if there is storage space for more
recordings.
What is DV IN socket?
DV (Digital Video) IN socket on this recorder
is an i.LINK-compliant input socket. You can
connect a DV-equipped camcorder to this
recorder using a single DV cable for copying
digital video, digital audio and data.
– This recorder is only compatible with DV-
format (DVC-SD) camcorders. Digital satellite
tuners and Digital VHS video recorders are
not compatible.
How good is the quality of the
– You cannot connect more than one DV
camcorder at a time to this recorder.
– You cannot control this recorder from
external equipment connected via the DV IN
socket.
– It is not possible to record the contents
from this recorder to your DV camcorder via
the DV IN socket.
recording?
There are a few picture quality levels to
choose from, ranging from “HQ” (1 hour
recording at high quality) to “SEP” (8 hours
recording at VHS quality) on a recordable
DVD.
Record Mode
Can I copy a VHS tape or DVD
HQ (high quality)
SP (standard play)
31
62
78
94
125
157
250
1
2
2.5
3
4
2
4
5
6
8
12
16
from an external player?
Yes, but only if the VHS tape or DVD is not
copy protected.
SPP (standard play plus)
LP (long play)
EP (extended play)
SLP (super long play)
SEP (super extended play)
6
8
83
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 83
2005-09-16 2:28:05 PM
Troubleshooting
WARNING!
Under no circumstances should you try to repair the system yourself, as this
will invalidate the warranty. Do not open the system as there is a risk of
electric shock.
If a fault occurs, first check the points listed below before taking the system for
repair. If you are unable to remedy a problem by following these hints, consult
your dealer or Philips for help.
Problem (General)
Solution
No power.
– Press STANDBY-ON button on the front of the recorder to
turn on the system.
– Make sure the AC outlet has power.
The message “IS THE TV
ON?” appears on the display
panel.
– This recorder will not operate until you complete the first
installation. Read chapter “Step 3: Installation and Set-up” for
details.
The buttons on the recorder
do not work.
– There is a technical problem. Disconnect the recorder from the
power outlet for 30 seconds, then connect again. If the recorder
still will not operate, then reset it to the default factory settings :
1) Disconnect the recorder from the power outlet.
2) Press and hold down STANDBY-ON button on the front of
the recorder while reconnecting to the power outlet.
3) Release STANDBY-ON button when “IS THE TV ON?”
appears on the display. All the information stored in the
memory (programmes, time) will be cleared. You may need
to reset the recorder settings after completing the basic
installation.
– Aim the remote control directly at the sensor on the front of
this recorder (not towards TV). If the recorder receives a signal
from the remote control, the icon Dwill appear on the display.
– Remove any obstacles between this recorder and the remote
control.
Remote control does not
work.
– Batteries are weak, replace the batteries.
– Turn on your TV and set to the correct Video In channel for the
recorder. You may go to Channel 1 on your TV, then press the
channel down button on your TV’s remote control until you see
the TV programme.
No picture.
– Check the video connection between this recorder and the TV.
– It may be due to the recorder’s video output setting not being
matched to the video connection. You can reset the recorder as
below :
1) Disconnect the recorder’s ~MAINS from the power supply.
2) Hold down
on the recorder whilst reconnect its ~MAINS
to the power supply.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 84
2005-09-16 2:28:06 PM
Troubleshooting (continued)
Problem (General)
Solution
– Check the recorder audio connection. Read chapter “Basic
Recorder Connections - Connecting the audio cables” for
details.
No sound.
– Set the Analogue output or Digital output correctly, based on
the device you have connected to this recorder. Read chapter
“System Menu Options - Audio Output settings” for details.
No TV signal received from
the recorder.
– Have your aerial or cable TV signal checked.
– Install the TV channel. Read chapter “System Menu Options -
Analogue Channel settings - Auto Search” for details.
The message ‘Disc contains
unknown data’ appears.
– This message may appear if you insert a disc that was not
finalised or contains junk data. DVD±Rs that have not been
finalised are very sensitive to fingerprints, dust, or dirt. This may
cause problems during recording. To use the disc again, do the
following :
1) Make sure that the surface of the disc is clean.
2) Press OPEN/CLOSE on this recorder to open the disc tray.
3) Insert the disc but do not close the tray.
4) Hold down button number {5} on the remote control until
the tray closes. This recorder will start the repair process.
5) If the disc is recovered, the Picture Index screen will appear.
Please observe the following:
– Error during recording : The title may be missing.
– Error while changing the title/index picture: The original title/
index picture may be visible.
– Error while finalising : The disc appears not to have been
finalised.
– Check that the cable is plugged in firmly.
– If a recording is made from a video recorder, change the
tracking on the video recorder.
The message ‘NO SIGNAL’
appears.
– This recorder may not be able to recognise the video input
signal if this signal is poor or does not comply with relevant
standards.
– No aerial signal received for the current channel or no video
signal received from the external input channel (EXT1, EXT2,
CAM1 or CAM2).
‘X’ appears at the bottom of
the TV screen.
– Check the antenna connection.
– Check the connection and turn on the connected device.
– Either no disc was inserted or the disc that was inserted cannot
be used for recordings. Insert a recordable DVD (DVD±R,
DVD±RW, or DVD+R Double Layer).
The message ‘Insert
recordable disc’ appears.
– The timer recording overlaps with another timer recording.
– If you ignore this warning, the programmed recording with the
early start time will start first.
The message ‘Collision’
appears.
– Change the information for one of the two recordings.
– Delete one of the two recordings.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 85
2005-09-16 2:28:06 PM
Troubleshooting (continued)
Problem (Playback)
Solution
Disc will not play.
– Insert the disc with the label facing up.
– The child lock is on. Read chapter “System Menu Options -
Access settings - Child lock” for details.
– Wrong region code. The DVD must be coded for ALL regions
or Region 2 in order to play on this recorder.
– There is no recording on the disc or wrong disc type. Read
chapter “Playback from Disc - Playable discs” for details.
– Make sure the disc is not scratched or warped. Clean the disc
or use a new one.
– Check if the disc is defective by trying another disc.
The picture is distorted or
black and white during
playback.
– The disc does not match with the TV colour system standard
(PAL/NTSC).
– The disc is dirty. Clean the disc.
– Sometimes a small amount of picture distortion may appear.
This is not a malfunction.
There is picture or sound
interference with the TV
reception.
– Have your aerial or cable TV signal checked.
– Fine-tune your TV channel. Read chapter System Menu Options
- Analogue Channel settings - Fine Tuning” for details.
Distorted sound coming
from a connected hi-fi
amplifier.
– Do not connect any cables from this recorder to the ‘Phono’
input of your amplifier.
– If you are playing a DTS CD, you have to use the COAXIAL or
OPTICAL-DIGITAL AUDIO OUTPUT socket of this recorder
to connect to the Hi-Fi system or amplifier.
– If a recording is too short, it is possible that a DVD player
cannot detect it. Observe the following ‘minimum recording
times’. Recording mode : {HQ} – 5 minutes, {SP}– 10 minutes,
{SPP} – 13 minutes, {LP} – 15 minutes, {EP} – 20 minutes, {SLP}
– 30 minutes, {SEP} - 30 minutes.
The recorded DVD cannot
be played back on another
DVD player.
– Some DVD players cannot play back DVD±RW recordings.
You can solve this problem by using a special function :
1) Press OPEN/CLOSE on this recorder to open the disc tray.
2) Insert the disc but do not close the tray.
3) Hold down the number button {2} on the remote control
until the tray closes. The disc is modified.
4) If this fails to produce the desired result, repeat the
procedure using the number button {3} on the remote
control.
5) You can restore the disc to its original condition by pressing
and holding number button {1}.
Warning! There is a risk that you can no longer play the disc
on other DVD players after the following procedure. Therefore,
apply this function with particular care.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 86
2005-09-16 2:28:06 PM
Troubleshooting (continued)
Problem (Recording)
Solution
– The TV channel you want to record is not stored or you
selected the wrong programme number. Check the TV channels
stored.
Recordings are not occurring
as scheduled. New
recordings cannot be made.
– You have to reset the timer recording after adjusted the clock
setting.
– You cannot use the recorder to duplicate copyright material
(DVDs or videotapes) onto a recordable DVD, “COPY PROT”
will be displayed.
The wrong TV channel was
decoded (recorded) after
you programmed a
– ‘VPS/PDC’ is turned on but ‘VPS/PDC time’ is wrong. Enter the
exact ‘VPS/PDC time’.
1) Enter the ShowView programming number of the desired TV
channel.
recording using the
ShowView system.
2) Press OK to confirm.
3) Check the channel number in the {Ch.} input field. If this does
not correspond to the desired TV channel, select this entry
field and change the channel number.
4) Press OK to confirm.
The index screen flickers
when a DVD±R is inserted.
– You can finalise the disc using the following function:
1) Press OPEN CLOSE on this recorder to open the disc tray.
2) Insert the disc but do not close the tray.
3) Hold down button number {4} on the remote control until
the tray closes. ‘FINALISING’ appears on the display panel.
4) If finalising has been successful, the Picture Index screen will
appear.
Picture is fuzzy and
brightness varies when
prerecorded video tapes.
– This happens if you try to copy DVDs or video tapes that have
been copy-protected. Even though the picture on the TV is fine,
but the recording on the recordable DVD is faulty. This
interference is unavoidable with copy-protected DVDs or video
tapes.
– The recordable DVD has a limited recording lifetime, please
change a new disc for recording.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 87
2005-09-16 2:28:06 PM
Specifications
Disc types
Connectivity
•
•
Recording : DVD+R/-R DVD+R Double layer,
DVD+RW/-RW
•
Rear Connections
–
–
–
–
–
–
–
–
–
–
–
–
RF antenna in
RF TV out
Scart 1 (CVBS, S-Video/RGB out)
Scart 2 (CVBS, S-Video/RGB in)
Component Video out Progressive
S-Video out
Playing: DVD-Video, MP3-CD, CD-R/CD-RW,
Video CD/SVCD, DVD+R/+RW, DVD-R/-RW,
Picture CD, MP3-CD, Audio CD
Picture/Display
•
•
•
D/A Converter: 10 bit, 54 MHz
A/D Converter: 9 bit, 27 MHz
Picture enhancement: Progressive Scan,
Pixelplus link
Video out (CVBS)
Audio left/right out
Digital audio out (coaxial)
Optical out
G-LINK (part of GUIDE Plus+)
Mains
Sound
D/A Converter: 24 bit, 96 MHz
A/D Converter: 24 bit, 96 MHz
•
•
•
•
Front Connections
–
–
–
–
DV-input (i.LINK)
S-Video in
Video in
Video Recording
Recording system: PAL
Compression formats: MPEG2, MPEG1
Audio compression: Dolby Digital 2.0
•
•
•
Audio left/right in
Convenience
Programming/Timer enhancement:
Video Playback
–
–
–
–
–
–
–
Automatic Satellite recording
Mon~Fri/weekly repeat programme
Manual timer
•
•
Compression formats: MPEG2, MPEG1
Video disc playback system: NTSC, PAL
One Touch Recording
Audio Playback
VPS/PDC recording control
ShowView / VIDEO Plus+
IR Set-Top-Box control
•
•
Compression formats: Dolby Digital, MP3,
MPEG2 Multichannel, MPEG1, PCM
MP3 bit rates: 32-256 kbps and VBR
•
•
•
•
•
Programmable events: 25
Disc Library: Up to 9000 titles and 999 discs
Child protection: Child Lock
Clock: Smart Clock
Digital Content Management: Digital Photo
Manager
Storage Media
•
•
Hard Disk capacity: 160 GB
HDD recording enhancement: Time Shift
Buffer, Instant Replay
•
•
Ease of installation: Follow TV, Auto install
Electronic programming guide: GUIDE Plus+
Tuner/Reception/Transmission
TV system: PAL, SECAM
•
•
Aerial input: 75 Ohm coaxial (IEC75)
Power
•
•
•
Power supply: 200-240V, ~50 Hz
Power consumption: 30 W
Standby power consumption: 3 W
Cabinet
•
•
Dimensions (WxHxD): 435 x 76 x 335 mm
Net Weight: 5 kg
Specification and design and subject to change
without notice.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 88
2005-09-16 2:28:06 PM
Glossary
JPEG: A very common digital still picture format.
A still-picture data compression system proposed
by the Joint Photographic Expert Group, which
features small decrease in image quality in spite of
its high compression ratio.
Analogue: Sound that has not been turned into
numbers. Analogue sound varies, while digital sound
has specific numerical values. These sockets send
audio through two channels, the left and right.
Aspect ratio: The ratio of vertical and horizontal
sizes of a displayed image. The horizontal vs. vertical
ratio of conventional TVs is 4:3, and that of wide-
screens is 16:9.
MP3: A file format with a sound data compression
system. “MP3” is the abbreviation of Motion Picture
Experts Group 1 (or MPEG-1) Audio Layer 3. By
using the MP3 format, one CD-R or CD-RW can
contain about 10 times more data then a regular
CD.
AUDIO OUT sockets: Red and white sockets on
the back of the system that send audio to another
system (TV, Stereo, etc.).
MPEG: Motion Picture Experts Group. A
collection of compression systems for digital audio
and video.
Chapter: Sections of a picture or a music piece on
a DVD that are smaller than titles. A title is
composed of several chapters. Each chapter is
assigned a chapter number enabling you to locate
the chapter you want.
PBC: Playback Control. Refers to the signal
recorded on video CDs or SVCDs for controlling
playback. By using menu screens recorded on a
Video CD or SVCD that supports PBC, you can
enjoy interactive playback and searching.
Digital: Sound that has been converted into
numerical values. Digital sound is available when
you use the DIGITAL AUDIO OUT COAXIAL or
OPTICAL sockets. These sockets send audio
through multiple channels, instead of just two
channels as analogue does.
PCM: Pulse Code Modulation. A digital audio
encoding system.
Progressive Scan: The progressive scan displays
twice the number of frames per seconds than
ordinary TV system. It offers higher picture
resolution and quality.
Disc menu: A screen display prepared for allowing
selection of images, sounds, subtitles, multi-angles,
etc recorded on a DVD.
Region code: A system allowing discs to be played
only in the region designated. This unit will only play
discs that have compatible region codes. You can
find the region code of your unit by looking on the
product label. Some discs are compatible with more
than one region (or ALL regions).
Dolby Digital: A surround sound system
developed by Dolby Laboratories containing up to
six channels of digital audio (front left and right,
surround left and right, centre and subwoofer).
Finalise: A process that makes playback of a
recorded DVD±R or CD-R possible on device that
can play such media. You can finalise DVD±R on
this unit. After finalising, the disc becomes play only
and you can no longer record or edit on the disc.
S-Video: Produces a clear picture by sending
separate signals for the luminance and the colour.
You can use S-Video only if your TV has an S-Video
In socket.
Index Picture Screen: A screen that gives an
overview of a DVD±RW or DVD±R. An Index
Picture represents each recording.
Title: The longest section of a movie or music
feature on DVD. Each title is assigned a title
number, enabling you to locate the title you want.
HDD (Hard disk drive): This is a mass data
storage device used in computers, etc. Disks are
flat, circular, rigid plates coated with a thin magnetic
media. Magnetic heads record data on the rapidly
spinning disks. This facilitates the reading and
writing of large amounts of data at high speed.
VIDEO OUT socket: Yellow socket on the back
of the system that sends the DVD picture video to
a TV.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 89
2005-09-16 2:28:06 PM
Display panel symbols/messages
The following symbols/messages may
appear on your recorder display:
COMPATIBLE
The recorder is busy making changes to make
the disc DVD-compatible.
00:00
COPY PROT
The DVD/video cassette you are trying to
copy is copy-protected.
Multifunction display/text line
–
–
–
–
–
–
–
–
Title/track number
Total/elapsed/remaining title/track time
Disc/title name
CREATE MENU
After the first recording has been successfully
complete on a new disc, the menu structure is
created.
Error or warning messages
Additional information regarding the disc
TV channel number or source of video
Clock (This is displayed in Standby mode).
TV programme title
DISC ERR
An error occurred when writing the title. If
this happens often, clean the disc or use a new
one.
¡
Tuner is selected as visible source.
Camara mode is the current active source.
Disc is the current active source.
DISC FULL
Disc is full. There is no storage space for new
recordings.
DISC UPDATE
–
Updating of disc is done after the editing is
complete.
–
Entire disc is being erased.
DISC WARN
Hard disk is the current active source.
TV
Modulator is turned off. The antenna signal
(RF signal) is only connected to the TV when
the modulator is turned off.
An error occurred when writing the title. The
recording will continue, but the error will be
skipped.
EMPTY DISC
Inserted disc is new or has been completely
erased (no recordings present).
D
Remote control command for the recorder
has been received.
EMPTY TITLE
An empty title was selected.
XTIMER
A timer recording has been programmed or is
active.
EPG DOWNLOAD
Downloading of TV listing data is in progress.
FINALISE
!SAT
The DVD±R disc is being finalised. The
progress bar on the LED shows the status of
the finalisation process.
The recorder is prepared for satellite
recording.
BLOCKED
The disc tray cannot be opened or closed due
to some mechanical obstruction.
INFO DVD
Information on the inserted DVD is displayed
on the TV.
CLOSING
Disc tray is closing.
90
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 90
2005-09-16 2:28:06 PM
Display panel symbols/messages (continued)
INSTALL
PHILIPS
The recorder has been turned on.
After the automatic channel search, the menu
for setting the time/date appears on the TV.
PHOTO MMM/NNN
IS THE TV ON
Number of the current photo (for Photo
mode). MMM represents the order of the
current photo, NNN represents the total
number of photos in the album. If the number
exceeds 999, ‘999’ will be displayed instead.
The recorder is currently in the first
installation mode. Turn on your TV and read
the chapter ‘Installation and Set-up’ in the user
manual.
MAX CHAP
POST FORMAT
The disc is being prepared after the menu
structure has been created.
The maximum number of chapters per title
disc has been reached. The maximum number
of chapters per title is 99, and 255 per disc.
PROTECTED
Title is copy-protected and cannot be
recorded.
MAX TITLE
The maximum number of titles has been
reached for the disc. Each disc can have a
maximum of 49 titles.
PROGRESSIVE SCAN
The video output is in progressive scan quality.
MENU UPDATE
After a successful recording, the list of disc
contents is updated.
READING
Disc is being recognised by the recorder.
RECORDING
A recording is currently in progress.
NO DISC
No disc has been inserted. If a disc has been
inserted, then it is possible that the disc cannot
be read.
STANDBY
The recorder has been turned off.
NO SIGNAL
No signal or poor signal strength.
SYS MENU
The on-screen menu display is on.
NTSC DISC
VCD
A disc with NTSC recordings has been
inserted and an attempt was made to record a
PAL signal. Insert a new disc or use a disc
containing PAL recordings.
A VCD has been loaded into the recorder.
BUSY
Wait until this message disappears. The
recorder is busy processing an operation.
OPENING
Disc tray is opening.
PAL DISC
A disc with PAL recordings has been inserted
and an attempt was made to record an NTSC
signal. Insert a new disc or use a disc
containing NTSC recordings.
91
Download from Www.Somanuals.com. All Manuals Search And Download.
dvdr5350H_EU_Eng537.indd 91
2005-09-16 2:28:06 PM
|