Quick install Guide
Welcome to the growing family of owners of PHILIPS equipment.
Thank you for buying a DVDR 725H/05. The following pages contain
explanations of the main features that will help you better understand
how the DVDR 725H/05 works.
You will find step-by-step descriptions of each function in the respective
chapter of the User manual.
Features
The DVDR 725H/05is a DVD recorder that can store TV-shows on a built-in hard disk (HDD).
Moreover, it is a DVD player that can play back DVDs, audio and (s-)video CDs, and MP3 CDs. You can play back and edit the stored TV shows
(or camcorder recordings), and save (archive) these on DVD+RW/+R media for later viewing.
But your DVDR 725H/05is more than just an ordinary DVD recorder with a built-in hard disk.
From now on, it's better to use your TV set just as a monitor and tune to the various TV channels from your DVD recorder, taking advantage of
features like FlexTime, Instant Replay, or the abitity to pause live TV.
FlexTime:
•
With FlexTime, you can watch or rewind a TV show while it is being recorded.
You don't have to wait until the end of the recording before starting playback.
Instant Replay:
•
You can repeat a scene of a live TV show at the touch of a button ( JUMP BACK ), as often as you like.
Pause Live TV
•
You can pause a live TV show by pressing PAUSE 9 to, say, answer a phone call, while the recording continues. By pressing PLAY G , you
can resume playback of the show at the scene it was interrupted.
Time Shift Buffer
The above features are available because the DVDR 725H/05uses a so-called Time Shift Buffer.
As soon as you turn on your DVD recorder, it starts recording from the current TV channel into the
Time Shift Buffer. The DVD recorder stores all the TV shows you watched since you turned on the
recorder. If you watched a TV show for more than 60 seconds, the recorder will insert a marker. If
information is already available from the GUIDE Plus+® system, the recorder will store the title and
mark the beginning of the TV show.
Note:When you are recording from a cable box through the external input jacks, the title and start/end
information will not be available.
If the Time Shift Buffer is full (the default setting is 3 hours) the recorder will delete the oldest
recording to make room for new recordings. You can mark TV shows or parts of these to be recorded permanently on the HDD while the other
contents of the Time Shift Buffer will be deleted.
The Time Shift Buffer can be best compared to a conveyor belt running from right to left. A TV show resembles a package on this conveyor belt. If
you change the programme number or the GUIDE Plus+® system detects the start of a TV show, a new package will be placed on the conveyor
belt. You can adjust the time a package will remain on the conveyor belt from 1 to 6 hours (the default setting is 3 hours).
As long as the packages are still on the conveyor belt, you can mark them red ( REC/OTR n ) or remove the marker ( RED function button).
You can only mark the package that's directly in front of you.
At the end of the conveyor belt (the preset time has expired), the recorder will decide whether a package will be stored (marked red) or
destroyed (unmarked). Only the packages that are marked red will be stored.
If you delete the Time Shift Buffer, the recorder will immediately remove all packages from the belt, storing only those you marked red.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick install Guide
Navigation in the Time Shift Buffer
You can move to any position within the Time Shift Buffer and watch the recording that was stored at that time.The indicator (yellow rectangle on
the time bar) shows the playback position in the Time Shift Buffer. You can move this indicator using the C , D buttons. If the playback position
is as far on the right-hand side as it can get, you are watching the current (live) picture of the TV channel you are tuned in. In the header of the
Time Shift Buffer, you will see an aerial symbol (contrary to the HDD symbol that appears when playing back from the HDD).
The following is a short overview of the basic buttons for navigation in the Time Shift Buffer:
N , JUMP BACK , D
When you reach the left end of the time bar, the recorder will switch to normal playback speed.
O , JUMP FWD , C
When you reach the right end of the time bar, you are watching the current TV programme. It is not possible to move further to the right. In
order to do so, the recorder would have to anticipate the future programme. You can use O to 'catch up' with the current TV programme.
PAUSE 9 If you stopped playback, the indicator will remain at that position until the preset time of the Time Shift Buffer has reached that
position (the indicator reaches the left end of the time bar). When it reaches the end, the DVD recorder will automatically switch to playback.
PLAY G Playback at normal speed. The limits of the Time Shift Buffer cannot be exceeded.
Recordings using the Time Shift Buffer
Recordings are always stored in the Time Shift Buffer first.
The following recording options are available:
Programmed recordings (TIMER) that will be carried out automatically at a predefined date/time
•
Direct recording of the current, live TV programme.
•
Marking of TV shows that have already been stored in the Time Shift Buffer.
•
You can mark recordings in the Time Shift Buffer to store them on the HDD instead of having them discarded when the Time shift Buffer period
expires. When a TV show is marked, a red marker appears on the time bar of the Time Shift Buffer. This marker indicates the recording. You
don't need to do anything else.
The DVD recorder automatically transfers a show to the HDD when:
the preset Time Shift Buffer period expires (the default setting is 3 hours).
•
the Time Shift Buffer is deleted ('Flush Buffer'function( SYSTEM MENU button, 'Set up'menu )).
•
you turn off the DVD recorder with STANDBY m .
•
you switch to camera mode using CAM (switch back with the same button).
•
date/time or channel settings have changed (menu is called up).
•
In the case of programmed recordings, the marker is set automatically. After that, the recording is also automatically stored on the HDD. When a
red marker has been set, you do not need to do anything else. Even if you turn off the recorder with STANDBY m , the recording will be stored
first before the DVD recorder automatically switches off.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick install Guide
Programming a recording
You have the following options for programming a recording:
The GUIDE Plus+® system:
Select the TV show you want to record from an overview displayed on the screen.
The VIDEO Plus+® system:
By entering the PlusCode programming number, you automatically set start/stop time, date, and programme number
Manual programming.
Manually started recordings
To record the current TV show, press REC/OTR n .
If you want to stop the recording, press the STOP h button. Select 'Yes' using D and confirm with OK .
If you want to mark a TV programme in the Time Shift Buffer, move the button on the time bar using C , D within the desired programme and
press REC/OTR n . To remove the marker, press the RED function button. The time bar must be visible. ( INFO button)
Recording mode
Recordings on the HDD will be carried out in an adjustable recording quality, the so-called recording mode. The higher the quality, the greater the
HDD space required. The recording quality is indicated as M1, M2, M2x, M3, M4, M6, and M8. The number indicates the number of hours that will
fit on a single-layer, 4.7GB DVD+RW or DVD+R. This means that you can store only 1 hour of 'M1' recordings on a DVD+RW/+R, while 8 hours
of 'M8' recordings will fit on the same disc.
This is particularly important when you want to copy recordings from the HDD onto a DVD+RW/+R. The quality of recordings on the HDD
cannot be changed at a later stage.
For example:
A 3-hour movie that was stored on the HDD in recording quality 'M1' will not fit on a DVD+RW/+R (M1=1 hour on a DVD+RW/+R). Only 1
hour of this movie can be copied onto a DVD+RW/+R. If you recorded the same movie in recording mode M3, the entire movie would fit on a
DVD+RW/+R. (M3=3 hours on a DVD+RW/+R).
A few closing instructions
If you have any problems operating the device:
1) Read the items in the User Manual in the section 'Before you call an engineer'
3) Call the customer support service. You will find the telephone numbers at the back of the User manual.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick install Guide
Connecting to the TV
Initial installation
1 Switch off your TV set.
1 Press STANDBY-ON m on the front of the DVD-recorder
P 'PHILIPS' and then 'IS TV ON?' will appear on the display.
2 Remove the aerial cable plug from your TV set. Insert it into the
2 If necessary, select the programme number for the input socket at
ANTENNA IN socket at the back of the DVD recorder.
the TV set.
3 Insert one end of the supplied aerial cable into the TV
OUT socket at the back of the DVD recorder and the other end
into the aerial input socket at the back of the TV set.
P The initial installation menu appears on the screen.
Virgin mode
4 Connect socket EXT1 TO TV-I/O or sockets S-VIDEO OUT
(Y/C) , VIDEO OUT (CVBS) , AUDIO OUT L/R with the
corresponding sockets of your TV set.
Menu Language
English
Español
Français
Italiano
Deutsch
Press OK to continue
3 Select your favourite setting using B or A .
Confirm with OK .
4 Proceed in the same way with the further menus: 'Audio
Language', 'Subtitle', 'TV shape' , 'Country' .
P Autoinstall starts after the confirmation of the message 'If you
have connected the antenna - press OK' using OK .
Connecting to the mains
P When Autoinstall is complete, 'Autoinstall complete' will
briefly appear on the TV screen.
Always check if the local mains voltage matches the voltage range
printed on the type plate at the back or bottom of the DVD-recorder.
If not consult your dealer or the customer support from your country.
5 End with SYSTEM MENU .
6 Press GUIDE/TV .
1 Switch on the TV set.
Setup
Home
2 Insert one end of the supplied mains cable into the mains socket
4MAINS at the back of the DVD recorder and the other end
into the wall socket.
Press Aor Bto select. Then press OK to confirm.
Setup
Choose item to set up :
Language
Country
Postal code
External receiver 1
English
United Kingdom
XXXXX
None
External receiver 2
External receiver 3
None
None
7 Select line 'Postal code' and confirm with OK .
8 Choose the entry position using C , D . Enter the local post
code of your location using A , B , or the number buttons
0..9 .
O Depending on the country you select, you can also enter
letters using B or A .
9 Confirm the local post code with OK .
0 To end, press GUIDE/TV .
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick install Guide
Installation with/without an external receiver
®
Installation of the GUIDE Plus+
System
1 Switch the DVD-recorder to the TV channel which transmits the
GUIDE Plus+® data (ITV analogue).
The TV channel that transmits the GUIDE Plus+® system information
must be installed.
The country and the local post code must be set as described
in the previous chapter.
additional information on the GUIDE Plus+® system together with tips
on installation.
In the unlikely event that you are unable to receive ITV analogue, then
your external satellite receiver can be used to download the data via
British Eurosport. In this case:
- Tune the DVD recorder to the external socket where you have
connected your satellite receiver.
- Tune the external receiver to Britsh Eurosport (P410)
- Leave the external satellite receiver switched on (not standby).
2 Leave the DVD recorder switched on during the night to load the
GUIDE Plus+® data.
Country/City
(Language)
TV=channel (aerial)
TV=channel (SAT)
The GUIDE PLus+® programme information will be downloaded in
the next 24 hours.
Eurosport
Astra 19.2E
Eurosport
Astra 19.2E, Hotbird
13.0E
Deutschland
Eurosport
P When data has been downloaded, following screen will appear
if you press the GUIDE/TV button.
Österreich
Eurosport
Eurosport
Astra 19.2E
Eurosport
Schweiz (Deutsch)
United Kingdom
Eurosport
ITV
Astra 28.2E
France
España
Canal+
Tele 5
Music Factory (TMF) /
Eurosport
TMF Astra 19.2E
Eurosp. Hotbird 13.0E
Music Factory (TMF)
Astra 19.2E
Music Factory (TMF)
Astra 19.2E
Music Factory (TMF)
Astra 19.2E
Music Factory (TMF)
Astra 19.2E
Nederland
- Eindhoven
- Rotterdam
- Amsterdam
België (Flemish)
Music Factory (TMF)
Music Factory (TMF)
Music Factory (TMF)
Music Factory (TMF)
3 To store the setting, please switch off the DVD-Recorder with
STANDBY m for 5 minutes.
Installation of an external Receiver
If you have connected an external receiver (satellite receiver, set-top
box, cable TV box), you must also install it in the GUIDE Plus+®
system. TV programmes (TV channels) that you watch via the receiver
will then also be displayed in the GUIDE Plus+® system and can be
programmed for recording.
It is also possible to update the GUIDE Plus+® data via an external SKY
satellite receiver from British Eurosport.
1 On the DVD recorder, select the programme number of the input
socket to which the external receiver is connected. (e.g. 'EXT2'
for socket ' EXT2 AUX-I/O )
2 Press GUIDE/TV
3 Select the menubar using A and then 'Setup' using C (second
menu page).
4 Select the line 'Setup' using B and confirm with OK .
5 Select 'External receiver 1' in the 'Setup' menu using B ,
A and confirm with OK .
6 Follow the instructions on the screen.
For more information on the settings, read the section 'Setting up the
GUIDE Plus+system' in the user manual.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick install Guide
Programming recordings with the
GUIDE Plus+® System
Recording on the HDD
1 Press GUIDE/TV on the remote control.
As soon as you turn on the DVD recorder, the currently selected TV
channel on the DVD-Recorder is recorded in a temporary storage
(Time shift Buffer).
Therefore, you can jump back to the currently selected TV programme
using JUMP BACK and watch a scene again.
Moreover, you can use all playback features such as still picture, slow
motion, search by time, search with N , O even with recordings
that are still in the time shift buffer.
In the meantime, the recording continues.
Recordings in the time shift buffer will be automatically deleted (factory
setting 3 hours).
Only recordings marked in the Time shift Buffer will be stored on the
the built-in HDD
2 Use A or B to select the TV station, and D or C to select the
show to record.
You can page trough channels using CHANNEL q ,
CHANNEL r and page trough days using N , O .
3 Confirm using the red function button of the remote control
('Record' on the screen).
Symbols in the 'Time Shift Buffer'
Following symbols can appear in the info bar at the top of the screen in
the 'Time Shift Buffer'. With the INFO button on the remote control
you can also call up this infobar.
P The TV -show is programmed for recording.
Read the information on the screen.
4 End with the GUIDE/TV button.
Left area
Information about the input signal were displayed here:
'C' Actual TV show (live picture) from the selected TV channel
'P01' Programme/Channel number of the selected TV channel
'ARD' Name of the TV-channel
'D' Playback from the HDD
Right area
Information about the current operating status were displayed here:
'B 16:03:02' Actual (live) picture of the selected TV-channel
( TUNER button)
'J PLAY' Playback from the HDD
'M PAUSE' Still picture
'H 1/2X' Slow motion forwards
'G -1/2X' Slow motion backwards
'L 4X' Fast motion forwards
'K -4X' Fast motion backwards
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick install Guide
Buttons in the 'Time Shift Buffer'
Manual recordings
1 Press INFO to display the bar of the time shift buffer on the
When you switch on the DVD recorder, the currently selected TV
programme will be recorded in the Time Shift Buffer.
In order to store a recording on the HDD, you must mark it red in the
Time Shift Buffer (time bar) before the Time Shift Buffer is deleted.
screen.
2 The following buttons are available:
O
N , O , PLAY G , PAUSE 9 , D , C , JUMP
FWD , JUMP BACK for navigation in the time bar.
How can I delete the Time Shift Buffer?
O
RETURN
- Switch off the recorder using STANDBY m
You can jump back to the previous scene of the time shift
buffer or to playback from the HDD.
If you press this button again, you can switch to the picture of
the actual running TV show.
- Select the 'Flush Buffer' feature ( SYSTEM MENU button, 'Set
up' menu)
- The preset time of the Time Shift Buffer (1-6 hours) has expired
O
O
TUNER
To switch to the actual TV show (live) of the selected TV
channel.
Starting a recording with data from the
GUIDE Plus+ system
The GUIDE Plus+® system provides the DVD recorder with data on
the start and end time of TV shows. These are shown as black bars on
the time bar.
®
T/C
Switching between title/chapter for selection using N ,
O . The top screen line displays either 'TITLE' for selecting
titles or 'CHAPTER' for selecting chapters
O
REC/OTR n :
1 In case the time bar of the Time Shift Buffer is not visible on the
- To start a recording that will be stored on the HDD.
- To mark a title that will be stored on the HDD.
- Hold button down to start the recording from the actual
position.
screen, press INFO on the remote control.
2 Press REC/OTR n .
P The red light around the record button n on the front will
switch on.
O RED function button:
P '1 Programm'will appear on the screen on the right end of
the time bar.
- To cancel the marked recording that was set with the
REC/OTR n button.
- Hold button down to stop the recording at the actual
position.
This indicates that the recording will automatically end at the
end of the TV show.
If you want to record the next TV show of the same TV
channel as well, press REC/OTR n again. '2 Programmes'
will appear.
O YELLOWfunction button: ('OVERVIEW')
To display an overview of all content of the time shift buffer.
O BLUEfunction button:('MORE INFO'):
Recording the previous TV show
To display any additional information for the actual TV show
If the DVD recorded has been on for some time, the Time Shift Buffer
already contains recordings. You can select those recordings (TV shows)
that you want to store on the HDD.
transmitted by the GUIDE Plus+® system.
- Select the recording using C or D (indicator must be between the
markers)
- Press REC/OTR n to mark the recording.
You can remove the marker using the RED function button.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick install Guide
Starting a recording without data from the
GUIDE Plus+ system:
If no data is available from the GUIDE Plus+® system, or in case the
recording is made from a satellite receiver connected to the EXT1
TO TV-I/O , EXT2 AUX-I/O socket, the time bar will not display any
data on the beginning, end, and title of the TV show.
Ending a recording automatically
®
Recordings will be automatically ended if data from the GUIDE Plus+®
is available or if you entered the end while starting a recording
(30-minute steps).
Ending a recording manually(immediately)
1 In case the time bar of the Time Shift Buffer is not visible on the
1 If necessary, switch the TV set to the programme number (input
screen, press INFO on the remote control.
socket) of the DVD recorder.
2 Press REC/OTR n .
2 Press STOP h
P The red light around the record button n on the front will
switch on.
P A message appears on the screen, asking whether you really
want to end the recording.
P '1 Programm +30' will appear on the screen on the right end
of the time bar. . This indicates that the recording will
automatically end after 30 minutes. Press
O If you want to end the recording, select 'Yes' with D and
confirm with OK .
REC/OTR n several times to prolong the switch-off time.
O If you do not want to end the recording, confirm 'No' using
OK .
Recording the previous TV show
If the DVD recorded has been on for some time, the Time Shift Buffer
already contains recordings. You can select those recordings (TV shows)
that you want to store on the HDD.
- Select the beginning of the oldest recording with D or C and hold
down REC/OTR n to mark the recording from the beginning.
STOP h will always end only the current recording (current time).
If you want to end a recording earlier than scheduled (jump back in the
Time Shift Buffer using D ), proceed as follows:
- Press INFO to display the time bar.
- Hold down the red function button.
- Select the end of the most recent recording using C or D and hold
down the RED function button to cut off the end.
You can remove the marker using the RED function button.
3 To permanently store the recording on the hard disk, you have to
erase the Time Shift Buffer. The following options are available:
O the preset Time Shift Buffer period expires (the default setting
is 3 hours)
O the Time Shift Buffer is manually erased ('Flush
Starting a recording from the current position
(from here onward)
Buffer'function( SYSTEM MENU button, 'Set up'menu ))
You can also start a recording immediately, regardless of the
recordings in the Time Shift Buffer.
O you turn off the DVD recorder with STANDBY m
O you switch to camera mode using CAM (switch back with the
same function button).
1 Hold down REC/OTR n until the red light on the record button
n at the front switches on.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick install Guide
Recording from a camera connected to Archiving (storing) titles on a
the front sockets
DVD+RW/+R
Using this function, you can store recordings via the front sockets
directly on the HDD.
You can choose the title of the HDD that you want to transfer on a
DVD+RW/+R.
You can edit these recordings on the HDD and transfer (archive) them
later with higher speed on a DVD+RW/+R disc.
Please observe:
For archiving you can only use the same recording quality that was
used for recording on the HDD. You cannot change the recording
quality for recordings on a DVD+RW/+R.
1 Connect the camera as described in the chapter ' Connecting
additonal devices/Connect camcorder to the front sockets'
1 Insert a DVD+RW/+R on which you want to store the selected
2 Press CAM on the remote control.
titles.
P The DVD recorder will switch to camera mode.
2 Press BROWSER HDD .
P The media browser appears with an overview of all recordings
on the HDD.
3 Select the title you want to copy on the DVD+RW/+R using B ,
A .
O If you want to archive several titles at a time, mark the desired
titles with SELECT .
4 Start the archiving process by pressing the green function button.
3 Select the socket to which the camera is connected using
If this button is not visible on the screen, check if this title is available in
the 'Time shift Buffer'. If necessary switch the DVD-Recorder off using
STANDBY m or use the 'Flush Buffer' function (button
SYSTEM MENU , menu 'Set up')
CHANNEL q .
O 'CAM1'
For recordings from the VIDEO (CAM1) , S-VIDEO
(CAM1) sockets.
Switching between the two sockets is done automatically.
P A message indicating the process appears both on the screen
and in the display.
O 'CAM2'
P During and after the archiving process, you see the TV show
of the currently selected TV channel. The buttons D , C ,
JUMP BACK , JUMP FWD , PLAY G , PAUSE 9 are
without function during archiving. Timer recordings will take
place.
For recordings from the DV IN (CAM2) socket.
4 Press REC/OTR n to start the recording.
5 You can stop the recording using the following buttons:
O
PAUSE 9
The recording will be paused. If you press the button again,
the recording will resume.
A new chapter is created.
Interrupt the process
Press the yellow function button. If necessary call up the informatoon on
the screen using the INFO button.
O
STOP h
The recording will be interrupted. You can start a new
recording by pressing REC/OTR n .
A new title is created.
Finalising a DVD+R
If recordings were stored (archived) on a DVD+R you have to finalise it
to make play back in a DVD-Player possible.
- Press DISC MENU and then STOP h to mark the first title.
6 Press CAM to terminate the camera operating mode.
- Press A to go to the 'disc info screen'
- Press C and select then the line 'Finalise disc' using B .
- Confirn with OK .
P The recording will be stored on the HDD as a new title.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick install Guide
Change the Code
Playback from the HDD
- Press DISC MENU and then SYSTEM MENU .
- Select the symbol ' ' using D then ' (Disc features)' with
B and confirm using C .
A
s
Each recording stored on the HDD is displayed in the media browser
with a corresponding index picture.
- Confirm the line 'Access control' using C and enter the 4 digit
code. Enter the code again for confirmation and end using SYSTEM
MENU .
1 Press BROWSER HDD on the remote control or HDD on the
DVD recorder.
P The Media Browser appears.
In the section 'Changing the PIN code' in chapter 'Access control (Child
Lock)' you will find further informations.
'Q' The marked titles will be stored (archived) on a DVD+RW/+R.
Buttons in the 'Media Browser'
O Delete title:
red function button
The tiltle (recordings) will be erased from the HDD.
O Archive title:
2 Select the title you want using B , A on the remote control or
green function button
DOWN , UP on the device.
The title will be transferred to DVD+RW/+R. If it is not
possible to record on a DVD+RW/+R, an error message
appears (disc not inserted,...).
You can switch a page forward or back using CHANNEL q ,
CHANNEL r .
If you want to archive several titles, mark the desired titles
with SELECT . You can unmark the title using the same
button.
3 You can choose one of the following options to start playback:
O
OK
Playback always starts at the beginning of the selected title.
Available functions during archiving
O
PLAY G
- Switching between the TV channels using CHANNEL q ,
CHANNEL r .
Playback will start at the position where it was interrupted in
the selected title( STOP h ). This also works if other titles or
DVDs have been played in the meantime.
- The selected TV show is recorded in the time shift buffer.
- Timer recordings takes place
O Lock/unlock title (child lock):
Symbols in the 'Media Browser'
yellow function button
Playback starts only if the right PIN code was entered. If no
PIN code has been entered or the PIN code was deleted, the
PIN code is '0000'. How you change the PIN code you will
read in the section 'Symbols in the media browser'
If you call up the Media Browser with the BROWSER HDD button,
following symbols can appear in the infobar at the top of the screen:
'P' This title was marked in the Time Shift Buffer for the storage on
the HDD. This title can only be deleted or locked (child lock). If
you want to make additional changes, you have to flush the time
shift buffer. Use therefore the 'Flush Buffer' function (button
SYSTEM MENU , menu 'Set up') or switch the DVD-Recorder
to standby.
O Protect/unprotect title against editing, automatic
deletion:
blue function button
An error message will appear if you try to edit this title.
Automatically deletion will take place, if your HDD will run full
with recordings. Stored recordings will be deleted in a certain
order. See details in the section 'Symbols in the media
browser'
'E' This title has been played once (has been 'watched'). If there is no
storage capacity free on the HDD such 'watched' titles will be
deleted automatically if the function 'Auto delete' is switched on.
You can change these setting in the title edit menu ( EDIT button,
blue button, EDIT button )
Switch over to the actual TV channel
during playback from a disc
Titles that were not played back, will have no symbol.
'F' The title is protected against editing and 'Auto delete'. If the title
is not protected, no symbol will be shown.
You can play back a disc, while the current TV show is still being
recorded.
'i' Child lock is activated. The index picture is switched off. Playback
starts only if the right PIN code was entered. If no PIN code has
been entered or the PIN code was deleted, the PIN code is '0000'.
1 To interrupt playback from a disc, press TUNER
P You will see the TV-show from the selected TV channel on
the DVD-recorder
O To continue playback, from the disc press DISC MENU .
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick install Guide
The remote control
REC/OTR n Record the current TV show on the HDD, mark recordings in the time
shift buffer to be stored on HDD.
Hold button down to start the recording from now. (Mark the
recording from the beginning of the actual position in the Time Shift
Buffer).
STANDBY m To switch set on or off, interrupt menu function.
A programmed recording (TIMER) or an archiving process will be
continued until the end, and the device will then be switched off.
CAM Switch to 'Camera mode' (recording directly on the HDD and not
through time shift buffer).
TV/HDD Switches scart socket EXT2 AUX-I/O of the DVD recorder directly to
the TV set. This lets you watch the picture from any unit connected to
this scart socket (set-top box, video recorder or satellite receiver) and
at the same time record from another source.
If you have not connected a device to the EXT2 AUX-I/O socket or
the device is switched off, you can use this button to switch between
TV reception and the signal of the DVD recorder.
This, however, functions only if you have connected your TV set to the
DVD recorder using a scart cable (socket EXT1 TO TV-I/O ) and your
TV set reacts to the switching.
RETURN Return to previous menu on a video CD (VCD). This also works with
some DVD discs.
Moreover, you can jump back to the previous scene of the time shift
buffer during playback from the HDD. You can switch to the picture of
the actual running TV show with the TUNER button.
EDIT Call up/Cancel the edit menu.
Call up/Cancel the menu for editing titles during playback.
TIMER s To make a TIMER programming with/without VIDEO Plus+® system or
to alter/clear programmed recordings.
SELECT Select function/value.
You can mark several titles in the media browser.
Switch on repeat play during playback from a disc.
You can switch to upper case characters if you enter names
TUNER This button lets you switch to the picture of the internal tuner (TV
channel).
During play back from the Time Shift Buffer, you can jump to the actual
TV show (live) of the selected TV channel.
SYSTEM MENU Call up/Cancel the system menu.
Depending on the operating mode from which you press this button:
•) DVD system menu: Press DISC MENU first.
•) HDD system menu: Press TUNER first.
DISC MENU For displaying the DVD menu or the index screen overview.
INFO For displaying additional information on the screen or the time shift
buffer during playback/recording on the HDD.
Call up additional information in the GUIDE Plus+® system.
BROWSER HDD Call up/cancel the overview of HDD recordings (media browser).
GUIDE/TV Call up/Cancel the GUIDE Plus+® System
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick install Guide
A B Cursor buttons up, down in the menus.
Previous or next position in the time shift buffer during playback from
HDD.
D C Cursor buttons left, right in the menus.
Previous or next position during playback of a title from the HDD
(media browser or time shift buffer). If you hold down this button you
can faster browse through the recordings. The speed will increase
automatically.
OK Confirming of functions
Starting the playback from the beginning in the 'Media Browser'.
STOP h Stop playback /Recording
Hold down the button to open and close the disc tray.
PAUSE 9 If this button is pressed during playback, the DVD recorder switches to
pause. You will see a still picture. If this button is pressed during
recording in the 'Camera mode', the DVD recorder switches to pause
and inserts a chapter marker.
PLAY G Play back a recorded disc.
CHANNEL q Next programme number
In the GUIDE Plus+® system one page forward
CHANNEL r Previous programme number
In the GUIDE Plus+® system one page back
JUMP BACK To jump back a certain time period (factory setting 30 seconds) The
setting can be changed in the settings of the HDD (button TUNER ,
SYSTEM MENU , line 'Set up', 'Jump back')
N Briefly press the button during playback: Previous chapter or previous
title
Hold down the button: Search backwards
Hold down the button during the still picture: slow motion backwards
In the GUIDE Plus+® System in the 'Grid' screen one day back.
In the title edit menu (button EDIT , line 'Video edit') you can jump
to the beginning during still picture (button PAUSE 9 ). This is
needful if you want to hide a scene at the beginning.
O Briefly press the button during playback: Next chapter or next title
Hold down the button: Search forwards
Hold down the button during the still picture: slow motion forward
In the GUIDE Plus+® System in the 'Grid' screen one day forward.
In the title edit menu (button EDIT , line 'Video edit') you can jump
to the end during still picture (button PAUSE 9 ). This is needful if
you want to hide a scene at the end.
JUMP FWD To jump forward a certain time period (factory setting 30 seconds) The
setting can be changed in the settings of the HDD (button TUNER ,
SYSTEM MENU , line 'Set up', 'Jump forward')
0..9 For entering numbers or characters at the corresponding entry fields.
T/C Switching between title and chapter for selection using N , O .
If 'INFO' appears in the display, the index menu from a recorded disc
will be shown or an introductory film will be played. In this case, this
function is not available.
DISC MANAGER Call up/Cancel the disc manager (DM).
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick install Guide
Colour buttons
You can call up different functions in the menus using the following colour buttons. The functions
will be shown in a bar at the bottom of the screen. If this bar is not visible, you can display it using
the INFO button.
Most of the colour buttons work only if this bar is visible.
RED Red function button, in some screens the function of a 'clear' button
(e.g. Disc Manager, 'Sort TV channels' menu, edit the title name,...).
GREEN Green function button
YELLOW Yellow function button
BLUE Blue function button
Additional TV functions
With the enclosed multicode remote control you can control the main functions of your TV set.
To do this, you must first enter a code number that corresponds to the type/brand of your TV set.
You will find the code numbers on the last page of the user manual. How to enter this code
number you will read in the chapter 'Using your DVD-Recorder remote control with your TV set'.
TV VOLUME q Increase TV volume
TV VOLUME r Reduce TV volume
For the following functions you need to hold down the • TV button (on the left side) and then
select the function you need with the appropriate button.
STANDBY m Switch on/off TV set
0..9 Number buttons 0 - 9
CHANNEL q To select a higher programme number
CHANNEL r To select a lower programme number
Additional TV functions for Philips TV-sets if supported from the TV. You need to hold down the •
TV button (on the left side).
T/C switch Teletext (TXT) on/off
TIMER s Clock display on the screen on/off
RETURN To return to the previous selected TV program/ previous menu step
SYSTEM MENU Call up the System Menu from the TV
B , A In the menus cursor up/down
D , C In the menus cursor left/right
OK Confirm functions or settings
RED ,GREEN , Colour buttons for special functions
YELLOW, BLUE
TUNER Switching the TV from the external sockets to the internal tuner.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick install Guide
Name
On /Off Source
Programme N.
®
GUIDE Plus+ Table
Please enter here the data of the TV channels in the GUIDE Plus+®
System. This can be helpful if you have to install the GUIDE Plus+®
System again or other situations.
Using a pencil helps you to make changes afterwards.
Please observe:
All data of the GUIDE Plus+® System has been loaded. (after 24
hours).
•
All TV channels have been allocated to the right programme
•
numbers Read in the instruction manual the chapter 'Additional
installation features' the section 'allocating/deleting TV channels
manually'.
If TV channels were rearranged, stored or deleted, you have to switch off the
DVD-Recorder (button STANDBY m ) for approx. 4 minutes.
Only that way the new data can be transferred to the GUIDE Plus+® system.
If you have connected an external Receiver (Satellite receiver, cable
box, ...) write also the programme number of the TV channel from
the external receiver in this list.
•
You will find this table in the DVD-Recorder as follows:
- Switch the DVD-Recorder on
•
- Press GUIDE/TV on the remote control
- Select the menubar using A ,
- Press as often as necessary C until the field 'Editor' is marked.
Home
Editor displays your TV channel settings. You may
switch channel On or Off (grey), select their Source
and their programme number. Press Bto use. Press
Dfor Info. Press Cfor Setup.
Search
Name
BBC1
BBC2
ITV
Schedule Info
On/Off Source Programme N.
Editor
On TV
On TV
On TV
On TV
P 001
P 002
P 003
P 004
CH4
- Copy the displayed table in this list.
- You can go up/down one page using CHANNEL q ,
CHANNEL r .
The amount of channels is depending on your setup/devices.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Name
On /Off Source
Programme N.
Name
On /Off Source
Programme N.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
|