DVD HOMETHEATER SYSTEM
MX2600
User manual
Thank you for choosing Philips.
Need help fast?
Read your Quick-Use/Start Guide and/or User Manual first for quick
tips that make using your Philips product more enjoyable.
If you have read your instructions and still need assistance,
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
CAUTION
Apparatus shall not be exposed to
dripping or splashing and no objects
filled with liquids, such as vases, shall
be placed on the apparatus.
English -------------------------------- 4
Español
WARNING
------------------------------37
To reduce the risk of fire or electric
shock, do not expose this appliance
to rain or moisture.
The standby switch does not
B.Português ------------------------7 0
disconnect the apparatus from mains.
IMPORTANT NOTE
Due to the numerous versions of new
CD-Audio copy protection or
enhanced CD-Audio protection
recently available on certain discs,
Philips is unable to guarantee that
this DVD system is fully compatible
with such new discs. Should you have
difficulty playing such CD-Audio
discs, kindly refer them to your CD-
Audio disc retailer.
This product incorporates copyright
protection technology that is protected by
method claims of certain U.S. patents and
other intellectual property rights owned by
Macrovision Corporation and other rights
owners. Use of this copyright protection
technology must be authorized by
Macrovision Corporation, and is intended for
home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or
disassembly is prohibited.
‘CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN
CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE ‘STANDARD
DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH THIS
MODEL 525p AND 625p DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTRE’.
Manufactured under license from
Dolby Laboratories.“Dolby”, “Pro-
Logic” and the double-D symbol are
trademarks of Dolby Laboratories.
Laser
Type
Wave length
Output Power
Semiconductor laser GaAIAs
650nm
7mW
“DTS” and “DTS Digital Surround”
are registered trademarks of Digital
Theater Systems, Inc.
Beam divergence 60 degree
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
stopped point (DVD/VCD/CD) .............. 20
Selecting various repeat functions .................. 20
Repeat play mode ......................................... 20
Repeating a section within a
General Inform ation
Supplied accessories ............................................ 5
Care and safety information .............................. 5
title/track........................................................ 21
Program favourite tracks
Connections
Step 1: Placing the speakers and subwoofer . 6
Step 2: Connecting speakers and subwoofer 7
Step 3: Connecting TV .................................... 8-9
Using Composite Video jack ........................ 8
Using Component Video jacks(Y Pb Pr) .... 8
Using S-Video jack .......................................... 9
Step 4: Connecting FM/AM antennas ........... 10
Step 5: Connecting the power cord .............. 10
(audio CDs andVCDs) ..................................... 21
Clearing the program .................................. 21
Using the menu bar to program ..................... 21
Playing MP3/Picture disc (Kodak, JPEG) ....... 22
MP3/JPEG picture disc ................................. 22
Kodak picture CD ........................................ 22
JPEG and MP3 simultaneously playback... 22
DVD Setup Menu O ptions
Connections (optional)
Using the menu bar ........................................... 23
Using the Setup Menu ....................................... 24
Setting the video output ............................. 24
Progressive Scan – turning on/off ............. 25
Screen saver – turning on/off .................... 25
Smart Power – turning on/off .................... 26
Night mode – turning on/off ..................... 26
Restoring the original settings ................... 27
Restricting playback by parental control . 27
Changing the password ............................... 28
Connecting aVCR or Cable/Satellite Box ... 11
Viewing and listening to the playback ...... 11
Using the VCR for recording DVD
playback........................................................... 11
Connecting digital audio equipment .............. 11
Digital Recording .......................................... 11
Functional O verview
Main unit and remote control ......................... 12
Control buttons available on the
remote only ................................................... 13
Tuner O perations
Tuning to radio stations .................................... 29
Presetting radio stations ................................... 29
Automatic presetting ................................... 29
Manual presetting ......................................... 29
Selecting a preset radio station....................... 29
Deleting a preset radio station .................. 29
Changing Tuning Grid ........................................ 29
Getting Started
Step 1: Inserting batteries into the
remote control ................................................... 14
Using the remote control to operate
the system ...................................................... 14
Step 2: Setting the TV ........................................ 14
Selecting the colour system that
corresponds to your TV.............................. 15
Setting the TV shape .................................... 15
Step 3: Setting the speakers ............................. 16
Test Tone – turning on/off .......................... 16
Adjusting the delay time .............................. 16
Adjusting the speaker output levels ......... 16
Step 4: Setting language preferences ............. 17
On-screen display (OSD) language ........... 17
Audio, Subtitle and Disc Menu language . 17
Progressive Scan ................................................. 18
Deactivate Progressive Scan manually ..... 18
O ther Functions
Setting the Sleep timer ...................................... 30
Sound Control .................................................... 30
Selecting surround sound ........................... 30
Selecting digital sound effects .................... 30
Volume Control .................................................. 31
Dimming system’s display screen .................... 31
Using the remote to operate ‘Philips’
television ............................................................... 31
Specifications .......................................................... 32
Troubleshooting ........................................... 33–34
Glossary .................................................................. 35-36
Disc O perations
Playable discs ....................................................... 19
Playing discs ......................................................... 19
Using the Disc Menu ......................................... 20
Basic playback controls ..................................... 20
Resuming playback from the last
4
Download from Www.Somanuals.com. All Manuals Search And Download.
General Inform ation
Supplied accessories
Care and safety inform ation
Avoid high tem peratures, m oisture,
water and dust
Composite video
cable (yellow)
– Do not expose the system, batteries
or discs to humidity, rain, sand or
excessive heat (caused by heating
equipment or direct sunlight). Always
keep the disc tray closed to avoid getting
dust on the lens.
Audio cable
(white, red)
Avoid condensation problem
– The lens may cloud over when the
player is suddenly moved from cold to
warm surroundings, making it impossible
to play a disc. Leave the player in the
warm environment until the moisture
evaporates.
FM wire antenna
AM loop antenna
Do not block the vents
– Do not operate the DVD system in an
enclosed cabinet and allow about 10 cm
(4 inches) of free space all around the
player for adequate ventilation.
10 cm
(4 inches)
10 cm
(4 inches)
10 cm
(4 inches)
DVD Home Cinema System
DVD MENU
Care of disc
Remote Control
and two AA
batteries
– To clean a CD, wipe it
in a straight line from the
center toward the edge
using a soft, lint-free
cloth. Do not use
cleaning agents, as they
may damage the disc.
– Write only on the printed side of a
CD-R/CD-RW and only with a soft felt-
tipped pen.
Speaker screws and
brackets
(5x)
– Handle the disc by its edge, do not
touch the surface.
Care of the cabinet
– Use a soft cloth slightly moistened
with a mild detergent solution. Do not
use a solution containing alcohol, spirits,
ammonia or abrasives.
Finding a suitable location
– Place the player on a flat, hard, stable
surface.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Step 1: Placing the speakers
and subwoofer
Center speaker
2
Front Speaker
(Right)
Front Speaker
(Left)
1
1
4
3
3
Subwoofer
Rear Speaker
(Right)
Rear Speaker
(Left)
Helpful Hints:
For best possible surround sound, all the
speakers (except subwoofer) should be
placed at the same distance from the
listening position.
– To avoid magnetic interference, do not
position the front speakers too close to
your TV.
– Allow adequate ventilation around the
DVD system.
1 Place the front left and right speakers at
equal distances from the TV and at an
angle of approximately 45 degrees from
the listening position.
2 Place the center speaker above the TV or
the DVD system so that the center
channel’s sound is localized.
3 Place the rear speakers at normal
listening ear level facing each other or
hang on the wall.
4 Place the subwoofer on the floor near
the TV.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Step 2: Connecting speakers
and subwoofer
Front Speaker
(Right)
Front Speaker
(Left)
Center
Speaker
FRO NT
R
FRO NT
L
CENTER
110V
220V
4
REAR
R
REAR
L
SUBW O O FER
Subwoofer
Rear Speaker
(Right)
Rear Speaker
(Left)
Connect the supplied speaker systems
using the fixed speaker cables by
matching the colours of the jacks and
speaker cables.
Helpful Hint:
– Ensure that the speaker cables are
correctly connected. Improper connections
may damage the system due to short-circuit.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Step 3: Connecting TV
Option 2
Option 1
1
4
4
2
2
1
* IMPO RTANT!
* IMPO RTANT!
– The progressive scan video quality
is only possible when using Y Pb Pr,
and a progressive scan TV is
required.
– You only need to m ake one video
connection from the following
options, depending on the
capabilities of your TV.
– Connect the DVD system directly
to the TV.
Using Com ponent Video jacks
(Y Pb Pr)
1 Use a component video cables (red/blue/
green - not supplied) to connect the
DVD system’s Y Pb Pr jacks to the
corresponding Component video input
jacks (or labelled asY Pb Pr or YUV) on
the TV.
Using Com posite Video jack
1 Use the supplied composite video cable
(yellow) to connect the DVD system’s
VIDEO O UT jack to the video input
jack (or labelled as A/V In,Video In,
CVBS, Composite or Baseband) on the
TV.
2 To hear the TV channels through this
DVD system, use the supplied audio
cables (white/red) to connect AUDIO IN-
TV jacks to the corresponding AUDIO
OUT jacks on the TV.
2 To hear the TV channels through this
DVD system, use the supplied audio
cables (white/red) to connect AUDIO
IN-TV) jacks to the corresponding
AUDIO OUT jacks on the TV.
3 Before starting operation, press TV on
the remote to select “TV” in order to
activate the input source.
3 Before starting operation, press TV on
the remote to select “TV” in order to
activate the input source.
4 If you are using a Progressive Scan TV (TV
must indicate Progressive Scan or
ProScan capability), to activate TV
Progressive Scan, please refer to your
TV user manual. For DVD receiver
Progressive Scan function through
SYSTEM MENU, See page 25.
Helpful Hint:
– If yourTV does not support Progressive
Scan, you will not be able to view the picture.
Press and hold OPEN/CLOSE key, and
press ‘1’ to deactivate progressive scan.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Option 3
4
2
1
* IMPO RTANT!
– If S-Video is used for DVD
playback, the system ’s VIDEO O UT
setting will need to be changed
accordingly.
Using S-Video jack
1 Use an S-Video cable (not supplied) to
connect the DVD system’s S-Video
O UT jack to the S-Video input jack (or
labeled asY/C or S-VHS) on the TV.
2 To hear the TV channels through this
DVD system, use the supplied audio
cables (white/red) to connect AUDIO
IN-TV) jacks to the corresponding
AUDIO OUT jacks on the TV.
3 Before starting operation, press TV on
the remote to select “TV” in order to
activate the input source.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Step 4: Connecting FM/AM
antennas
Step 5: Connecting the
power cord
fix the claw into
AM
antenna
the slot
110V
220V
1
➠
FM
antenna
1
2
~
AC MAINS
Power Outlet
1 Connect the supplied AM loop antenna
to the AM jack. Place the AM loop
antenna on a shelf or attach it to a stand
or wall.
After everything is connected
properly,
1 Plug in the AC power cord to the power
outlet.
2 Connect the supplied FM antenna to the
FM (75ꢀ) jack. Extend the FM antenna
and fix its ends to the wall.
2 Never make or change any connections
with the power switched on.
Helpful Hint:
For better FM stereo reception, connect
an external FM antenna (not supplied).
– Refer to the type plate on the rear or
bottom of the system for identification and
supply ratings.
Helpful Hints:
– Adjust the position of the antennas for
optimal reception.
– Position the antennas as far as possible
from yourTV,VCR or other radiation source
to prevent unwanted interference.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (optional)
Connecting a VCR or
Cable /Satellite Box
Connecting digital audio
equipm ent
DIGITAL IN
VCR or Cable/
1
Satellite Box
~
AC MAINS
VCR or Cable/
Satellite Box
(for example)
CD Recorder
3
L
4
4
2
4
Viewing and listening to the playback
Digital Recording
1 Connect the VCR or Cable/Satellite Box
1 Connect the DVD system’s DIGITAL
O UT-COAXIAL jack to the DIGITAL
COAXIAL IN jack on a digital recording
device (such as Dolby Digital decoder,
CD recorder).
to the TV as shown.
2 Connect the DVD system’s AUDIO IN-
AUX jacks to the AUDIO OUT jacks on
the VCR or cable/satellite box.
Before starting operation, set the
DIGITAL OUTPUT according to the
audio connection.
Before starting operation, press AUX on
the remote to select “AUX” in order to
activate the input source.
Helpful Hints:
Using the VCR for recording DVD
playback
– Some DVDs are copy-protected. You
cannot record the disc through a VCR or
digital recording device.
– Always refer to the owner’s manual of the
other equipment for complete connection
and usage details.
3 Connect the DVD system’s VIDEO O UT
jack to the VIDEO IN jack on theVCR.
4 Connect the DVD system’s LINE OUT
jacks to the AUDIO IN jacks on theVCR.
This will allow you to make analog stereo
(two channel, right and left) recordings.
To view DVD playback while
recording, you must connect the DVD
system to your TV using S-VIDEO (as
shown above) or Component (Y Pb Pr)
connection.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional O verview
Main unit and rem ote control
1
2
3
4
5
6
7
8
9
10
11
1 STANDBY O N
9 PRO G
–
Switches to standby mode or turns on
the system.
–
–
DISC: starts programming.
TUNER: starts manual preset
programming.
2 Disc tray
0 VO LUME (VO L +-)
Adjusts the volume level.
3 O PEN /CLO SE 0 (DISC mode only)
–
–
Opens/Closes the disc tray.
! PHO NES
4 System display panel
–
For plugging in the headphones jack.
The speakers output will be cancelled.
5 ÉÅ PLAY/PAUSE
–
DISC: starts/pauses playback.
6 S PREV / TNEXT
–
–
–
DISC: *searches backward/forward or
selects a track.
TUNER: tunes the radio frequency
up/down.
TV: selects previous/next channel on
Philips TV (on remote only).
7 Ç STO P
–
–
–
Exits an operation.
DISC: stops playback or clears a program.
TUNER: *erases a preset radio station.
8 SO URCE
–
Selects the relevant active mode :TV,
DISC,TUNER (FM/AM) or AUX.
* = Press and hold the button for m ore than two seconds.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional O verview
& REPEAT
Selects various repeat modes.
Control buttons available on the
rem ote only
–
* REPEAT A-B
Repeats a specific section on a disc.
–
27
( SUBW +-
8
–
–
–
–
Adjusts subwoofer’s sound level.
REAR +-
Adjusts rear speakers’ sound level.
26
CENTER +-
Adjusts center speaker’s sound level.
12
10
13
25
14
14
6
6
5
TVVO L +-
AdjustsTV volume (Philips TV only).
) SLEEP
–
Sets the sleep timer function.
24
23
22
21
20
7
15
16
17
18
¡ DIM
–
Selects different levels of brightness for
display panel.
™ NIGHT (DVD mode only)
–
19
Toggles between night mode on and off.
Selects night mode on to level out the
volume output.
£ MUTE
Mutes or restores the volume.
–
24 RESUME
@ DISC MENU
–
Continues playback after an interruption.
–
Enters disc contents menu.
25 O K
# SYSTEM MENU (DISC mode only)
–
Confirms a selection.
–
Enters or exits system setup menu.
§ Num eric Keypad (0-9)
$ 1234
–
–
Enters a track/title number of the disc.
Enters a number of a preset radio station.
–
–
Selects movement direction in the menu.
Use 2 3 to select a preset radio
station.
27 B
–
–
Switches to standby mode.
In TV mode, switches Philips TV on/off.
% SURRO UND
–
Selects multichannel surround (Dolby
Digital, Dolby Pro Logic or Dolby Pro
Logic II) or stereo mode.
^ SO UND
Selects a sound effect.
–
* = Press and hold the button for m ore than two seconds.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Step 1: Inserting batteries into
the remote control
Step 2: Setting the TV
IMPO RTANT!
Make sure you have com pleted all
the necessary connections. (See
pages 8–9 “Connecting TV”).
3
1
2
1 Press SO URCE control until “DISC”
appears on the display panel (or press
DISC on the remote).
2 Turn on the TV and set to the correct
video-in channel. You should see the blue
DVD background screen on the TV.
➜ Usually this channel is between the
lowest and highest channels and may be
called FRONT,A/V IN or VIDEO. See
your TV manual for more details.
➜ Or, you may go to channel 1 on your
TV, then press the Channel down button
repeatedly until you see the Video In
channel.
1 Open the battery compartment.
2 Insert two batteries type R06 or AA,
following the indications (+-) inside
the compartment.
3 Close the cover.
Using the rem ote control to
operate the system
1 Aim the remote control
directly at the remote
sensor (iR) on the front
panel.
➜ Or, the TV remote control may have a
button or switch that chooses different
video modes.
2 Select the source you
wish to control by
pressing one of the
source select buttons
on the remote control
(for example TV,
TUNER.)
3 Then select the desired
function (for example
ÉÅ, S, T).
CAUTIO N!
– Rem ove batteries if they are
exhausted or if the rem ote is not to
be used for a long tim e.
– Do not use old and new or
different types of batteries in
com bination.
– Batteries contain chem ical
substances, so they should be
disposed of properly.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Selecting the colour system that
corresponds to your TV
Setting the TV shape
Set the aspect ratio of the DVD Player
according to the TV you have connected.
The format you select must be available
on the disc. If it is not, the setting for TV
display will not affect the picture during
playback.
In order for a DVD to play on this DVD
system, the colour system of the DVD,
the TV and the DVD player should match.
Before changing the TV system,
determine the colour system of your TV.
1 In disc mode, press SYSTEM MENU.
➜ Use the 1234keys on the remote
to navigate in the menu.
1 In disc mode, press SYSTEM MENU.
➜ Use the 1234keys on the remote
to navigate in the menu.
2 Highlight
icon and press 4.
2 Highlight
icon and press 4.
Move to
and press 2.
Move to
and press 2.
Move to {TV SYSTEM} and press 2.
Move to {TV SHAPE} and press 2.
TV SHAPE
TV SHAPE
4:3 PS
4:3 LB
16:9
TV SYSTEM
AUTO
NTSC
PAL
TV SYSTEM
VIDEO OUT
VIDEO OUT
PROGRESSIVE
SCR SAVER
SMART POWER
PROGRESSIVE
SCR SAVER
SMART POEWR
SET TO NTSC
SET TO LETTER BOX
AUTO – Select this if the connected TV
is compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
4:3 PS (PanScan) –
Select this if you have
a conventional TV and
want both sides of the
picture to be trimmed
NTSC – Select this if the connected TV
has the NTSC system. It will change the
video signal of a PAL disc (VCD only) and
output it to NTSC format.
or formatted to fit your TV screen.
4:3 LB (letterbox) –
Select this if you have a
conventional TV. In this
case, a wide picture with
black bands on the upper and lower
portions of the TV screen will be
displayed.
PAL – Select this if the connected TV has
the PAL system. It will change the video
signal of an NTSC disc and output it to
PAL format.
3 Press 34to select a setting and press
OK to confirm.
16:9 – Select this if
you have a wide-
screen TV.
➜ Follow the instructions shown on the
TV to confirm the selection (if any).
➜ If a blank/distorted TV screen appears,
wait for 15 seconds for auto recovery.
3 Press 34to select a setting and press
OK to confirm.
TIPS:
To return to the previous menu, press 1.
To exit the menu, press SYSTEM MENU.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
{CNTR DELAY} – Select this to set the
delay time in relation to the listening
position/distance from the center speaker
(5ms, 3ms, 2ms, 1ms or OFF).
Step 3: Setting the speakers
You can adjust the delay time (center and
rear speakers only) and volume level for
individual speakers. These adjustments
let you optimise the sound according to
your surroundings and setup.
{REAR DELAY} – Select this to set the
delay time in relation to the listening
position/distance from the rear speakers
(15ms, 12ms, 9ms, 6ms, 3ms or OFF).
Test Tone -Turning on/off
5 Press 1 2 to adjust the settings that
If you have turned on the test tone, the
test signal will be automatically generated
to help you judge the sound level of each
speaker.
best suit your surround sound needs.
6 Press O K to confirm.
Helpful Hint:
1 In disc mode, press SYSTEM MENU.
➜ Use the 1234keys on the remote
to navigate in the menu.
– Use longer delay time settings when the
rear speakers are closer to the listener than
the front speakers.
2 Highlight
icon and press 4.
Adjusting the speaker output levels
Move to
and press 2.
You can adjust the rear speakers, center
speaker and subwoofer output levels by
comparing the sound from the front
speakers.
Move to {TEST TONE} and press 2.
NIGHT MODE
CNTR DELAY
REAR DELAY
TEST TONE
OFF
ON
TEST TONE
3 Press 34to select a setting.
Adjusting the delay tim e
4 Press 34to highlight one of the options
below at a time, then press 2.
● Press the respective buttons on the
remote (REAR +-, CENTER +-
and SUBW +-) to adjust the output
level between -15dB ~ +10dB.
NIGHT MODE
CNTR DELAY
REAR DELAY
TEST TONE
CENTER DELAY SET TO 1 MS
Helpful Hint:
– If you have selected Stereo mode,
adjusting the center and rear speakers’
volume level will have no effect.
TIPS:
To return to the previous menu, press 1.
To exit the menu, press SYSTEM MENU.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Step 4: Setting language
preferences
Audio, Subtitle and Disc m enu
languages
1 In disc stop mode, press SYSTEM
MENU.
You can select your preferred language
settings so that this DVD system will
automatically switch to the language for you
whenever you load a disc. If the language
selected is not available on the disc, the
disc’s default setting language will be used
instead. The OSD (on-screen display)
language for the system menu will remain
as you set it, regardless of various disc
languages.
➜ Use the 1234keys on the remote
to navigate in the menu.
2 Highlight
icon and press 4.
Move to
and press 2.
Move to highlight one of the options
below at a time, then press 2.
– {AUDIO} (disc’s soundtrack)
– {SUBTITLE} (disc’s subtitles)
– {DISC MENU} (disc’s menu)
O n-screen display (O SD) language
1 In disc mode, press SYSTEM MENU.
➜ Use the 1234keys on the remote
to navigate in the menu.
AUDIO
ENGLISH
ENGLISH
ENGLISH
SUBTITLE
DISC MENU
2 Highlight
icon and press 4.
Move to
and press 2.
GOTO LANGUAGE SETUP PAGE
Move to {MENU LANG} and press 2.
3 Press 34to select a language and press
O K to confirm.
PARENTAL
4 Repeat steps 2~3 for other settings.
PASSWORD
ENGLISH
SPANISH
PROTUGUESE
MENU LANG
DEFAULTS
OSD LANGUAGE SET TO ENGLISH
3 Press 34to select a language and press
O K to confirm.
TIPS:
To return to the previous menu, press 1.
To exit the menu, press SYSTEM MENU.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Progressive Scan
The progressive scan produces 60
complete frames per second, rather than
30 frames per second of interlaced
scanning (normal TV system).With nearly
double the number of lines, progressive
scan offers higher picture resolution,
eliminates bothersome motion artifacts
and jaggier edges on moving objects.
To enjoy the quality offered by
progressive scan, a progressive scan TV is
required.
Deactivate Progressive Scan
m anually
When the progressive scan functiom is
activated, the TV screen may bo blank
because of the following reasons:
–
Your TV supports progressive scan,
but it is not activated.To activate it,
please refer to your TV user manual.
–
The cables are not connected
accordingly. Refer to page 8 for proper
connections.
–
YouTV does not support progressive
scan function. In that case, you can
deactivate progressive scan as below.
1 Press STANDBY O N on the front
panel to switch on the DVD receiver.
2 Press and hold O PEN/CLO SE 0 on
the front panel, while pressing down
O PEN/CLO SE 0, press numerical
keypad “1” on the remote control.
3 The blue Philips DVD background
appears on the TV."
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc O perations
IMPO RTANT!
If the inhibit icon (or X)
Region Codes
–
DVDs must be labelled for ALL
regions or for Region 4 in order
to play on this DVD system. You
cannot play discs that are labeled
for other regions.
ALL
appears on the TV screen
when a button is pressed, it
m eans the function is not available
on the current disc or at the current
tim e.
4
Helpful Hints:
– DVD discs and players are
designed with regional restrictions.
Before playing a disc, m ake sure the
disc is for the sam e zone as your
player.
– Do not push on the disc tray or
put any objects other than discs on
the disc tray. Doing so m ay cause
the disc player to m alfunction.
– It may not be possible to play CD-R/RW in
all cases due to the type of disc or condition
of the recording.
– If you are having trouble playing a certain
disc, remove the disc and try a different one.
Improperly formatted discs will not play on
this DVD system.
Playing discs
Playable discs
1 Press SO URCE control until “DISC”
appears on the display panel (or press
DISC on the remote).
Your DVD hom e cinem a system will
play:
– DigitalVersatile Discs (DVDs)
– Video CDs (VCDs)
– Super Video CDs (SVCDs)
– Audio Compact Discs (CDs)
– MP3 discs, picture (Kodak, JPEG) files
on CD-R(W)
2 Turn on the TV power and set to the
correct Video In channel. (See page 14
“Setting the TV”).
➜ You should see the blue Philips DVD
background screen on the TV.
– JPEG/ISO 9660 format
3 Press the OPEN /CLOSE 0to open the
disc tray and load a disc, then press the
button again to close the disc tray.
➜ Make sure the disc label is facing up.
For double-sided discs, load the side you
want to play face down.
– Maximum 12 characters display
– Supported sampling frequencies :
32 kHz, 44.1 kHz, 48 kHz
– Supported Bit-rates : 32~256 (kbps),
variable bit rates
4 Press ÉÅ to start playback.
➜ If a disc menu shows on the TV, see
next page on “Using the Disc Menu”.
➜ If the disc is locked by parental
control, you must enter your four-digit
password (see page 28).
TIPS: The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc O perations
Resum ing playback from the last
stopped point (DVD/VCD/CD)
Using the Disc Menu
Depending on the disc, a menu may
appear on the TV screen once you load in
the disc.
● When play is stopped and the disc has
not been ejected, press RESUME.
To cancel the resum e m ode
To select a playback feature or item
● Use the 1234keys or num eric
keypad (0-9) on the remote, then press
O K to start playback.
● When play is stopped, press Ç again.
Helpful Hint:
– Opening the disc tray or disconnecting the
DVD system from the power supply will
cancel the resume option.
To access the m enu
● Press DISC MENU on the remote.
For VCDs with Playback Control
(PBC) feature (version 2.0 only)
Selecting various repeat
functions
● During playback, pressing DISC MENU
will return to the menu screen (if PBC is
on).
Repeat play m ode
● While playing a disc, press REPEAT to
select various repeat mode.
➜ "REPEAT” icon will appear on the display,
except REPEAT OFF mode.
Basic playback controls
Pausing playback
● Press ÉÅ.
DVD
REPEAT CHAPTER ™ REPEAT TITLE
™ REPEAT OFF
➜ To resume normal playback, press
ÉÅ again.
VCD/SVCD/CD
REPEAT ONE (repeat the current
track) ™ REPEAT DISC ™
REPEAT-OFF
Selecting another track/chapter
● Press S/ Tor use the num eric
keypad (0-9) to key in a track/chapter
number.
MP3
➜ If repeat mode is active, pressing S
/ T will replay the same track/chapter.
REPEAT ONE ™ REPEAT ALBUM ™
REPEAT DISC ™ REPEAT OFF
Searching backward/forward
● Press and hold S/ T, then press
ÉÅ to resume normal playback.
➜ While searching, pressing and holding
S/ Tagain will increase the
search speed.
Helpful Hint:
– ForVCD, repeat playback is not possible if
the PBC mode is switched on.
Stopping playback
● Press Ç.
TIPS: The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc O perations
Repeating a section within a title/
track
Clearing the program
● Stop playback, then press the Ç again.
1 While playing a disc, press REPEAT A-B
➜ "PROG CLR" appears.
at the starting point.
Helpful Hints:
2 Press REPEAT A-B again to end the
section.
– If the DVD system is disconnected from
the power supply, it will erase the program.
– ForVCD, the program option is only
possible if the PBC mode is turned off.
➜ The section A and B can be set only
within the same title/track.
➜ The section will now repeat
continuously.
3 Press REPEAT A-B again to resume
Using the m enu bar to
program
normal playback.
IMPO RTANT!
Program favourite tracks
(audio CDs and VCDs)
You can play the contents of the disc in
the order you want, by programming the
order of the tracks to be played. Up to
99 tracks can be stored.
You have to turn on your TV and set
to the correct Video In channel. (See
page 14 “Setting the TV”).
1 Stop playback, then press SYSTEM
MENU.
➜ The menu bar will appear across the
top of the TV screen.
1 Stop playback, then press PRO G on the
2 Press 12to select
and press 4to
front panel to enter program mode.
enter the program menu.
2 Use the num eric keypad (0-9) to enter
a valid track number.
➜ "FULL" will appear if you have
programmed 99 tracks.
PROGRAM P 00 : 00
3 Press O K to store the track.
3 Use the num eric keypad (0-9) to enter
the track number to be programmed.
➜"FULL" will appear if you have
4 Repeat steps 2~3 to select other tracks.
5 Press ÉÅ to start program playback.
programmed 99 tracks.
4 Press ÉÅ to start program playback.
To clear the program
● Stop playback, then press the Ç again.
TIPS: The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc O perations
During playback, you can;
Playing MP3 /Picture disc
(Kodak, JPEG)
● Press S / T to select another title/
picture in the current folder.
IMPO RTANT!
● Use 1234keys to rotate/flip the
You have to turn on your TV and set
to the correct Video In channel. (See
page 14 “Setting the TV”.)
picture files.
● Select “ZOOM ON”, then press and hold
the S / T (or select Q R on
the system menu, then press 4) to zoom
the picture in or out.
MP3 / JPEG picture disc
1 Load an MP3/JPEG Picture disc.
➜ The disc reading time may exceed
30 seconds due to the complexity of
the directory/file configuration.
● Press ÉÅ to pause/resume playback.
Helpful Hints:
2 The album/picture menu appears on the
TV screen. If not, press DISC MENU on
the remote.
– Due to the recording nature of Digital Audio
MP3 (DAM), only digital audio music will play.
– It is normal to experience an occasional
“skip” while listening to your MP3 discs.
– It may not be possible to play certain MP3
or JPEG disc due to the configuration and
characteristics of the disc or condition of the
recording.
3 Use 1234keys to select a desired
album, then press O K to open the folder
(for MP3 disc only).
➜ The title menu appears on the TV.
– For multi-session discs with different
formats, only the first session will be avalable.
4 Use 1234keys to select a desired
title, then press O K to start playback.
● You can also use the num eric keypad
JPEG and MP3 sim ultaneously
playback
(0-9) to enter your choice.
5 To stop playback, press Ç.
1 Select a MP3 track and press NIGHT.
➜ ‘MP3 is selected’ appears on the TV.
Kodak picture CD
2 Press 34to select a picture file, then
press O K.
1 Load a Kodak picture disc.
➜ The disc reading time may exceed
30 seconds due to the complexity of
the directory/file configuration.
➜ The picture will be played back in
sequence together with MP3 music.
3 To quit simultaneous playback, press Ç.
➜ The picture and MP3 music playback
will stop.
2 Playback will start automatically.
3 To stop playback, pressÇ.
➜
9 thumbnail pictures will appear on
the TV.
Helpful Hint:
– If the disc menu doesn’t appear on theTV
screen, press DISC MENU to turn on the
disc menu.
➜
Use S / T to view the
previous/next page (if available).
4 Use 1234keys to navigate within the
menu and press O K to start playback.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu O ptions
SUBTITLE
Using the m enu bar
Select a subtitle language that is available on the DVD.
You can continue a number of operations
directly via the multiple menu bars on the
TV screen without interrupting the disc
playback. The exception is when you
LANGUAGE
DVD : Select an audio soundtrack language that is
available on the DVD.
VCD : Select audio channels : LEFT VOCAL,
RIGHT VOCAL, MONO LEFT,
MONO RIGHT or STEREO.
enter (SETUP MENU), after which the
playback will pause.
SLO W MO TIO N
Select a slow playback speed. The volume will be
muted. To resume normal playback, press ÉÅ.
DVD : SF x2, SF x4, SF x8,
SR x2, SR x4, SR x8, PLAY.
VCD : SF x1, SF x2, SF x3, PLAY.
,
(SF - Slow Forward, SR- Slow Rerverse)
FAST REVERSE (FR)
DVD / MP3 : FR x2, FR x4, FR x6, FR x8, PLAY.
VCD /CD : FR x1, FR x2, FR x3, FR x4, PLAY.
FAST FO RW ARD (FF)
DVD / MP3 : FF x2, FF x4, FF x6, FF x8, PLAY.
VCD / CD : FF x1, FF x2, FF x3, FF x4, PLAY.
Select a search speed (FR - backward, FF - forward).
The volume will be muted. To resume normal
playback, press ÉÅ.
1 In disc mode, press SYSTEM MENU.
➜ The menu bar will appear across the
top of the TV screen.
STATUS
Allows viewing of the current status of the disc
.
The information will vary depending on the disc
format.
Available on DVD only
TITLE SEARCH (TITLE XX:YY")
Select a Title for playback to begin.
CHAPTER SEARCH (CHAPTER XX:YY)
Select a Chapter for playback to begin.
"XX" - current title/chapter number.
"YY" - total number of title/chapter.
Use the num eric keypad (0-9) to change the
"XX" number, then press O K.
2 Use 1234keys on the remote to
navigate in the menu.
➜ Press 12to move through the menu bar.
➜ Press 4to enter the selection. If
there are multiple choices available,
press 4repeatedly to select.
TIME SEARCH (TIME __:__:__)
Use the num eric keypad (0-9) to enter the
time (hours, minutes and seconds) at which you want
playback to begin (for DVD or VCD with PBC-OFF
only).
ZO O M
3 Press SYSTEM MENU again to exit the
Select an enlarge picture ratio : x1.5, x2 or x4. You can
use 1234keys to move within the enlarged picture
on the TV.
menu.
To resume normal playback,
select 'ZOOM OFF' from the menu.
IMPO RTANT!
ANGLE (for DVD only)
Select to view the same scene from different angles
if the DVD is recorded with multiple angles.
– Som e operations m ay be different
or restricted, depending on the disc
form at. Refer to the jacket or case
of the disc you are playing.
– Changing the Subtitle Language
and Audio Language from the m enu
bar will only apply to the current
disc, it will not change the default
preset.
STEP FO RW ARD
Select to advance the still picture one frame
forward. To resume normal playback, press ÉÅ.
PBC O N/O FF (for VCD 2.0 with PBC feature)
Select between PBC On and Off.
'PBC OFF' - the playback will start automatically.
'PBC ON' - the disc menu (if available) will appear
on the TV. Use the num eric keypad (0-9) to
enter your choice.
PRO GRAM
Stop playback, then select this to enter the program
menu (see page 21 "Using the menu bar to program").
23
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu O ptions
Setting the video output
Using the Setup Menu
This DVD setup is carried out via the TV,
enabling you to customise the DVD
system to suit your particular
requirements.
Choose the type of video output that
matches the video connection between
the DVD system and your TV.
Stop playback, then follow the steps of
“Using the Setup Menu” and select :
> VIDEO OUT
,
4
TV SHAPE
TV SYSTEM
VIDEO OUT
S-VIDEO
YPRPB
SCR SAVER
SMART POWER
1 In disc mode, press SYSTEM MENU.
S-VIDEO
➜ Playback will pause.
2 Highlight
icon and press 4to enter
S-VIDEO
the setup menu. Then press 34to
select one of the setup menu options and
press 2to enter the menu.
Select this if you have connected the
DVD system to your TV using the
S-Video jack.
Y PR PB
SYSTEM MENU
Select this if you have connected the
DVD system to your TV using component
video jacks.
Picture Setup
Sound Setup
Helpful Hint:
Language Setup
– You do not need to adjust the video output
setting if you are using CVBS jack (yellow) to
connect the DVD system to yourTV.
– If the Progressive Scan is set to ON, this
item will not be available.
Feature Setup
3 Use 1234keys on the remote to
navigate in the menu.
4 Press O K to confirm your selection.
NOTE:
Som e of the features in the Setup
Menu are described in “Getting
Started”.
TIPS:
To return to the previous menu, press 1.
To exit the menu, press SYSTEM MENU.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu O ptions
Progressive Scan – turn on/off
Screen Saver – turning on /off
The screen saver will help to prevent
your TV display device from getting
damaged.
To select this item you must set “Video
Output” to Y PR PB and ensure that your
TV has progressive scan (see page 9).
Follow the steps of “Using the Setup
Menu” and select :
Follow the steps of “Using the Setup
Menu” and select :
> SCR SAVER
> PRO GRESSIVE
TV SHAPE
TV SYTEM
VIDEO OUT
TV SHAPE
TV SYSTEM
VIDEO OUT
SCR SAVER
OFF
SMART POWER
ON
PROGRESSIVE
SCR SAVER
OFF
ON
SMART POWER
SCREEN SAVER NOW OFF
PROGRESSIVE NOW OFF
O FF
OFF
Select this to disable the screen saver
function.
Select this to disable Progressive scan
function.
ON
O N
Select this to enable the Progressive scan
function.
Select this if you wish to turn off the TV
screen when play is stopped or paused
for more than five (5) minutes.
Helpful Hint:
– If a blank/distortedTV screen appears,
wait for 15 seconds for auto recovery.
– To deactivate the progressive function,
refer to the hint menu displayed on theTV
screen or see page 8 and 18.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu O ptions
Night m ode – turning on/off
Sm art power – turn on/off
When the night mode is activated, the
high volume outputs will be softened and
low volume outputs will be brought
upward to an audible level. It is useful for
watching your favourite action movie
without disturbing others at night.
This function can also be accessed via the
NIGHT button on the remote.
When in “Stop” or “No Disc” mode, the
DVD system will switch to standby mode,
after 15 minutes of inactivity for energy
saving.
Follow the steps of “Using the Setup
Menu” and select:
> SMART POW ER
Follow the steps of “Using the Setup
Menu” and select:
TV SHAPE
> NIGHT MO DE
TV SYSTEM
VIDEO OUT
SCR SAVER
SMART POWER
OFF
ON
NIGHT MODE
CNTR DELAY
REAR DELAY
TEST TONE
OFF
ON
OFF
OFF
Smart Power is disabled.
NIGHT MODE SET TO OFF
ON
O FF
In STOP or NO DISC mode, if no actions
are performed for 15 minutes, the smart
power will be activated.
Select this when you want to enjoy the
full dynamic of surround sound.
O N
Select this to level out the volume.
This feature is only available for movies
with Dolby Digital mode.
TIPS:
To return to the previous menu, press 1.
To exit the menu, press SYSTEM MENU.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu O ptions
2 Select
Move to
icon and press 4.
Setting the DEFAULT function will reset
all options and your personal settings to
the factory defaults, except your
password for Parental Control andVideo
Output.
and press 2.
Move to {PARENTAL} and press 2.
__ __ __ __
Enter code
PARENTAL
PASSWORD
MENU LANG
DEFAULTS
Follow the steps of “Using the Setup
Menu” and select :
> DEFAULTS
PLEASE ENTER PASSWORD
3 Use the num eric keypad (0-9) to enter
‘1234’ (default password) when you are
asked to enter the four-digit password.
You will have to enter the same code,
exactly, twice.
PARENTAL
PASSWORD
MENU LANG
DEFAULTS
RESET
LOAD FACTORY SETTINGS
➜ To change the password, see page 28
“Changing the password”.
RESET
Pressing 2to select {RESET}, all settings
will now reset to factory defaults.
4 Select a rating level and press OK.
➜ DVDs that are rated above the level
you selected will not play unless you
enter your four-digit password and
choose a higher level rating.
Restricting playback by Parental
Control
➜ To disable Parental Controls and have
all discs play, choose ‘NO PARENTAL’.
Some DVDs may have a parental level
assigned to the complete disc or to
certain scenes on the disc. This feature
lets you set a playback limitation level.
The rating levels are from 1 to 8 and are
country dependent. You can prohibit the
playback of certain discs that are not
suitable for your children or have certain
discs played with alternative scenes.
PARENTAL
1 KID SAFE
2 G
3 PG
4 PG 13
5 PG-R
6 R
PASSWORD
MENU LANG
DEFAULTS
7 NC-17
8 ADULT
KID SAFE
1 In disc mode, press SYSTEM MENU.
➜ Use the 1234keys on the remote
to navigate in the menu.
5 Press SYSTEM MENU again to exit the
menu.
TIPS:
To return to the previous menu, press 1.
To exit the menu, press SYSTEM MENU.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu O ptions
2 Select
Move to
icon and press 4.
Rating explanations
NO PARENTAL – All discs will play.
and press 2.
8 ADULT
7 NC-17
5-6 PG-R
–
Mature material; should be viewed
only by adults due to graphic sexual
material, violence, or language.
Move to {PASSWORD} and press 2.
–
No children under age 17; not
recommended viewing for
children under age 17.
PARENTAL
__ __ __ __
Enter old code
PASSWORD
–
Parental Guidance - Restricted;
recommended that parents
restrict children under 17 from
viewing or allow to view only
when supervised by a parent or
adult guardian.
MENU LANG
DEFAULTS
PLEASE ENTER OLD PASSWORD
4 PG13
–
Material is unsuitable for children
under age 13.
Parental Guidance suggested.
General Audience; recommended
as acceptable for viewers of all
ages.
Kids material; recommended
especially for children and
viewers of all ages.
3 Use the num eric keypad (0-9) to enter
your original four-digit password at “Enter
old code”.
3 PG
2 G
–
–
➜ If you are asked to enter the code for
the first time, key in ‘1234’.
➜ If you forget your password, press Ç
four tim es to restore to the default
password (1234).
1 KID SAFE
–
Helpful Hints:
4 Enter your new four-digit password.
– VCD, SVCD, CD have no level indication,
so parental control has no effect on these
type of discs.This also applies to most illegal
DVDs.
– Some DVDs are not encoded with a rating
though the movie rating may be printed on
the Disc cover. The rating level feature does
not prohibit playback of such Discs.
PARENTAL
__ __ __ __
PASSWORD
Enter new code
MENU LANG
DEFAULTS
PLEASE ENTER NEW PASSWORD
5 Enter the same new four-digit password
again.
Changing the password
You can change the four-digit password
used for Parental Control. Enter your
four-digit password to play a prohibited
disc or if prompted for a password. The
default password is ‘1234.’
PARENTAL
__ __ __ __
PASSWORD
Confirm code
MENU LANG
DEFAULTS
1 In disc mode, press SYSTEM MENU.
➜ Use the 1234keys on the remote
to navigate in the menu.
Confirm :
6 Press SYSTEM MENU again to remove
the menu.
TIPS:
To return to the previous menu, press 1.
To exit the menu, press SYSTEM MENU.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner O perations
IMPO RTANT!
1 Tune to your desired radio station (see
Make sure the FM and AM antennas
are connected.
“Tuning to a radio station”).
2 Press PRO G.
➜ “PRO GRAM” icon appears.
Tuning to radio stations
3 Use the num eric keypad (0-9) to
select a preset number.
1 Press TUNER on the remote (or press
SO URCE control on front panel) to
select “FM” or “AM”.
➜ If “PRO GRAM” icon goes off before you
select the desired preset number, press
PROG again.
2 Press and hold S / T on the
remote until the frequency indication
starts to change, then release.
➜ The next radio station will tune
automatically.
4 Press PRO G again to store.
5 Repeat steps 1~4to store other radio
3 To tune a weak station, press S / T
briefly and repeatedly until an optimal
reception is found.
stations.
Helpful Hints:
– If you attempt to program more than 40
preset radio stations,“PROG FULL”
appears.
– The system will exit presetting mode if no
button is pressed within five seconds.
Presetting radio stations
You can store up to 40 preset radio
stations in the memory, starting from FM
and followed by AM bands.
Selecting a preset radio
station
Autom atic presetting
You can store all available radio stations
automatically.
● Press 1 2or use the num eric keypad
(0-9) to select a preset number.
➜ The preset number, radio frequency,
and waveband will appear.
● In tuner mode, press and hold PRO G
until "AUTO PROG" appears.
Deleting a preset radio station
AUTO PROG
● Press and hold Ç until “PXX CLR”
appears.
➜ All the available radio stations with
strong transmission signal will be stored.
➜ Automatic preset will begin from
preset (1) and all your former presets will
be overridden.
➜ If it reaches 40 presets,“PROG FULL”
appears.
➜ Once completed,“PROG END”
appears.
➜ The current preset radio station will
be deleted.
Changing tuning grid
In some countries, the frequency step
between adjacent channels in the AM/FM
band is 9K/50K(10/100K in some areas).
The preset frequency step in the factory
is 9K/50K.
● In tuner mode, press and hold PLAY/
PAUSE on the front panel for more than
5 seconds, the display will show “9/
50KHZ” or “10/100KHZ” .
Manual presetting
You can choose to store only your
favourite radio stations.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
O ther Functions
Setting the Sleep Tim er
Sound Control
The sleep timer enables the system to
switch to standby mode automatically at a
preset time.
IMPO RTANT!
For proper surround sound, m ake
sure the speakers and subwoofer are
connected (see page 7).
● Press SLEEP repeatedly until it reaches
the desired preset turn-off time.
➜ The selections are as follows (time in
minutes):
Selecting surround sound
● Press SURRO UND to select
multichannel surround or stereo mode.
➜ The availability of the various surround
sound modes depends on the number of
speakers used and the sound available on
the disc.
15™ 30™ 45™ 60™ 90™ 120
™ OFF™ 15…
➜ “SLEEP” icon will be shown on the
display, except if "OFF" is selected.
➜ The center and surround speakers
operate only in Multi-channel surround
mode.
➜ The available output modes for multi-
channel include: Dolby Digital, Dolby Pro
Logic or Dolby Pro Logic II surround
sound.
➜ Stereo broadcasts or recordings will
produce some surround channel effects
when played in a surround mode.
However, mono (single channel sound)
sources will not produce any sound from
the rear speakers.
To check or change the setting
● Press SLEEP once to show the
remaining time before switching off.
If you continue pressing the SLEEP
button, the next Sleep Timer option will
appear.
To cancel the sleep tim er
● Press SLEEP repeatedly until "OFF"
appears or press the STANDBY O N
button.
Selecting digital sound effects
Select a preset digital sound effects that
matches your disc’s content or that
optimises the sound of the musical style
you are playing.
● Press SO UND to select the available
sound effect.
When playing movie discs, you can select:
CONCERT,ACTION, DRAMA or SCI-FI.
When playing music discs or while in
TV, TUNER or AUX mode, you can
select: DIGITAL, CLASSIC, ROCK or
JAZZ.
Helpful Hint:
– For flat sound output, select CONCERT or
CLASSIC.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
O ther Functions
Using the rem ote to operate
‘Philips’ television
Volum e control
● Adjust VO LUME control (or press
VO L +/-on the remote) to increase
or decrease the volume level.
➜ "VOL XX" appears. “XX” denotes the
volume level.
1 Press TV.
2 Press S / T or use the num eric
keypad (0-9) to select the TV’s channel.
3 Press TVVO L +/- to adjust the TV’s
To listen through the headphones
volume level.
● Plug in the headphones to the PHO NES
socket at the front of the DVD system.
➜ The speakers will be muted.
4 Press B to turn off your TV.
Helpful Hint:
– When listening toTV or AUX programs,
press the respectiveTV or AUX button on the
remote in order for the sound to be heard.
To turn off the volum e tem porarily
● Press MUTE.
➜ Playback will continue without sound
and "MUTE" appears.
➜ To restore the volume, press MUTE
again or increase the volume level.
Dim m ing system ’s display
screen
● In any active mode, press DIM to select
desired brightness : HIGH, MID or LOW.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
AMPLIFIER SECTIO N
MAIN UNIT
PMPO Power
Total output power
Home Theater Mode
1% THD
- Front
- Rear
2400W
Power Supply Rating
110 V / 220V
50 - 60 Hz Switchable
110W
200W
Power Consumption
Dimensions (w x h x d) 435 x 53 x 359 (mm)
Weight
120W
20W1 x 2
5.59 kg
20W1 x 2
- Center
20W1
SPEAKERS
Front/Rear speakers
System
Impedance
Speaker drivers
- Subwoofer
Frequency Response
Signal-to-Noise Ratio
Input Sensitivity
- AUX In
20W2
180 Hz – 14 kHz / ꢀ3 dB
> 60 dB (A-weighted)
2 ways
4 ꢀ
3” full-range woofer
with piezo
450 mV
450 mV
-TV In
Frequency response
160 Hz – 20 kHz
1
4 ohm, 160 Hz - 20 kHz, 1% THD
Dimensions (w x h x d) 95 x 150 x 90 (mm)
2 4 ohm, 40 Hz - 160 Hz, 1% THD
Weight
0.54 kg (Front speaker)
0.64 kg (Rear speaker)
TUNER SECTIO N
Tuning Range
(Front speakers are magnetically shielded)
FM 87.5 – 108 MHz
(50/100kHz steps)
AM 530 – 1710 kHz
(10kHz steps)
CENTER SPEAKER
System
2 ways, magnetically
shielded
AM 531-1602kHz
(9kHz steps)
Impedance
4 Ω
26 dB Quieting Sensitivity FM 22 dBf
26 dB Quieting Sensitivity AM 5000 ꢁV/m
Speaker drivers
2 x 3” full-range woofer
with piezo
160 Hz – 20 kHz
IF Rejection Ratio
FM 60 dB
AM 24 dB
Frequency response
Dimensions (w x h x d) 250 x 94 x 84 (mm)
Weight 1.05 kg
Signal-to-Noise Ratio
FM 50 dB
AM 30dB
AM Suppression Ratio
Harmonic Distortion
FM 30 dB
PASSIVE SUBW O O FER
FM Mono 3%
FM Stereo 3%
AM 5%
FM 180 Hz – 10 kHz /
ꢀ6 dB
FM 26 dB (1 kHz)
FM 23.5 dB
Impedance
4 Ω
Speaker drivers
Frequency response
6.5” woofer
40 Hz – 160 Hz
Frequency Response
Dimensions (w x h x d) 230 x 222 x 360 (mm)
Weight 3.68 kg
Stereo Separation
Stereo Threshold
DISC SECTIO N
Laser Type
Disc Diametre
Video Decoding
Video DAC
Specifications subject to change without prior
notice
Semiconductor
12cm / 8cm
MPEG-2 / MPEG-1
10 Bits
Signal System
Video Format
Video S/N
PAL / NTSC
4:3 / 16:9
56 dB (minimum)
Composite Video Output 1.0 Vp-p, 75 ꢀ
S-Video Output
Y - 1.0Vp-p, 75 ꢀ
C - 0.286Vp-p, 75 ꢀ
Audio DAC
Frequency Response
24 Bits / 96 kHz
4 Hz – 20 kHz (44.1 kHz)
4 Hz – 22 kHz (48 kHz)
4 Hz – 44 kHz (96 kHz)
SPDIF (Sony Philips
digital interface) Coaxial
IEC 60958
Digital Output
- PCM
- Dolby Digital
IEC 60958, IEC 61937
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
WARNING
Under no circum stances should you try to repair the system yourself, as this
will invalidate the warranty. Do not open the system as there is a risk of
electric shock.
If a fault occurs, first check the points listed below before taking the system for
repair. If you are unable to rem edy a problem by following these hints, please
consult your dealer or Philips for help.
Problem
Solution
No power.
No picture.
–
–
Check if the AC power cord is properly
connected.
Press the STANDBY ON on the front of the
DVD system to turn on the power.
–
Refer to your TV’s manual for correct Video In
channel selection. Change the TV channel until
you see the DVD screen.
–
–
Press DISC on the remote.
Refer to description "Progressive Scan" on the
next page.
Com pletely distorted picture or
black /white picture.
–
If this happens when you changing the setting
of the ‘TV SYSTEM’, wait for 15 seconds for
auto recovery.
–
–
Check the video connection.
Sometimes a small amount of picture distortion
may appear. This is not a malfunction.
Clean the disc.
–
The aspect ratio of the screen cannot
be changed even though you have set
the TV display.
–
–
The aspect ratio is fixed on the DVD disc.
Depending on the TV, it may not be possible
to change the aspect ratio.
No sound or distorted sound.
–
–
–
–
Adjust the volume.
Check the speaker connections and settings.
Disconnect the headphones.
Press the correct source button on the
remote (TV or AUX, for example) to choose
the equipment that you want to hear through
the DVD system.
The DVD system does not work.
–
–
Disconnect the power cord from the power
outlet for a few minutes. Reconnect the
power cord and try to operate again as usual.
The disc tray cannot open and “TRAY
LO CKED” is displayed.
Press and hold SOURCE button on the front
panel for more than two seconds, then press
PLAY button.
The display panel is dark.
Low hum or buzz sound.
–
–
Press DIM again.
Place the DVD system as far away as possible
from electrical devices that may be causing
interference.
Cannot activate som e features, such as
Angles, Subtitles, or m ulti-language
Audio.
–
–
The features may not be available on the DVD.
Changing the language for the sound or
subtitle is prohibited on the DVD.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Solution
The DVD player does not start playback.
–
–
Insert a readable disc with the playback side
facing down. The DVD+R/CD-R must be
finalised.
Check the disc type, colour system and region
code.
–
–
Check for any scratches or smudges on the disc.
Press SYSTEM SETUP to turn off the setup
menu screen.
–
–
You may need to enter the password in order
to change the parental control rating level or
to unlock the disc for playback.
Moisture has condensed inside the system.
Remove the disc and leave the system turned
on for about an hour.
There is no sound from the center and
rear speakers.
–
–
–
–
Press CENTER +- or REAR +- to adjust
the volume level.
Make sure the center and rear speakers are
connected correctly.
Press SURROUND button to select a correct
surround sound setting.
Make sure the source you are playing is
recorded or broadcast in surround sound
(DPL II, Dolby Digital, etc.)
–
–
If the signal is too weak, adjust the antenna or
connect an external antenna for better reception.
Increase the distance between the system and
your TV or VCR.
Radio reception is poor.
–
–
Tune in to the correct frequency.
Place the antenna farther away from any
equipment that may be causing the noise.
–
–
Select the source (DISC or TUNER, for
example) before pressing the function button
(ÉÅ , S, T).
Reduce the distance between the remote
control and the system.
The rem ote control does not function
properly.
–
–
Replace the batteries with new ones.
Point the remote control directly toward the
IR sensor.
–
–
Check that the batteries are loaded correctly.
Ensure that you have activated the progressive
scan function.To activate, reder to your TV
user manual.
The TV screen has no display when
progressive scan function is activated.
–
–
Ensure that your TV supports progressive scan,
if not see page 18 to deactivate it.
Ensure that your cables are connected
correctly, See page 8 for propor connections.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Analog: Sound that has not been turned into
numbers. Analog sound varies, while digital
sound has specific numerical values. These
jacks send audio through two channels, the left
and right.
JPEG: A very common digital still picture
format.A still-picture data compression system
proposed by the Joint Photographic Expert
Group, which features small decrease in image
quality in spite of its high compression ratio.
Aspect ratio: The ratio of vertical and
horizontal sizes of a displayed image.The
horizontal vs. vertical ratio of conventional
TVs. is 4:3, and that of wide-screens is 16:9.
MP3: A file format with a sound data
compression system.“MP3” is the abbreviation
of Motion Picture Experts Group 1 (or
MPEG-1) Audio Layer 3. By using the MP3
format. One CD-R or CD-RW can contain
about 10 times more data then a regular CD.
AUDIO O UT Jacks: Red and white jacks on
the back of the DVD System that send audio
to another system (TV, Stereo, etc.)
Parental control: Limits Disc play according
to the age of the users or the limitation level in
each country. The limitation varies from disc
to disc; when it is activated, playback will be
prohibited if the software’s level is higher than
the user-set level.
Bit Rate: The amount of data used to hold a
given length of music; measured in kilobits per
second, or kbps. Or, the speed at which you
record. Generally, the higher the bit rate, or
the higher the recording speed, the better the
sound quality. However, higher bit rates use
more space on a Disc.
PCM (Pulse Code Modulation): A system
for converting analog sound signal to digital
signal for later processing, with no data
compression used in conversion.
Chapter : Sections of a picture or a music
piece on a DVD that are smaller than titles.
A title is composed of several chapters. Each
chapter is assigned a chapter number enabling
you to locate the chapter you want.
Playback control (PBC): Refers to the
signal recorded on video CDs or SVCDs for
controlling playback. By using menu screens
recorded on aVideo CD or SVCD that
supports PBC, you can enjoy interactive
playback and searching.
Com ponent Video O ut Jacks: Red, blue,
and green jacks on the back of the DVD
System that send high-quality video to a TV
that has Component Video In jacks (R/G/B,
Y/Pb/Pr, YUV, etc.)
Progressive Scan: It displays all the
horizontal lines of a picture at one time, as a
single frame. This system can convert the
interlaced video from DVD into progressive
format when the DVD Player is connected to a
Progressive Scan TV. It dramatically increases
the vertical resolution and provides the best
picture.
Disc m enu: A screen display prepared for
allowing selection of images, sounds, subtitles,
multi-angles, etc recorded on a DVD.
Digital: Sound that has been converted into
numerical values. Digital sound is available
when you use the DIGITAL AUDIO OUT
COAXIAL or OPTICAL jacks.These jacks
send audio through multiple channels, instead
of just two channels as analog does.
Region code: A system allowing discs to be
played only in the region designated.This unit
will only play discs that have compatible region
codes. You can find the region code of your
unit by looking on the product label. Some
discs are compatible with more than one
region (or ALL regions).
Dolby Digital: A surround sound system
developed by Dolby Laboratories containing
up to six channels of digital audio (front left
and right, surround left and right, center and
subwoofer).
S-Video: Produces a clear picture by sending
separate signals for the luminance and the
colour. You can use S-Video only if your TV
has an S-Video In jack.
Dolby Pro Logic II: It creates five full-
bandwidth output channels from two-channel
sources. Decode only systems that derive 5.1
channels instead of the conventional four
channels of Dolby Pro Logic surround sound.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Sam pling Frequency: Frequency of
sampling data when analog data is converted to
digital data Sampling frequency numerically
represents how many time the original analog
signal is sampled per second.
Surround: A system for creating realistic
three-dimensional sound fields full of realism
by arranging multiple speakers around the
listener.
Title: The longest section of a movie or
music feature on DVD. Each title is assigned a
title number, enabling you to locate the title
you want.
VIDEO O UT jack: Yellow jack on the back
of the DVD system that sends the DVD
picture video to a TV.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Meet Philips at the Internet
MX2600
CLASS 1
LASER PRODUCT
8239 300 43011
ATLM-0530/55-3
Download from Www.Somanuals.com. All Manuals Search And Download.
|