Philips DVD Player BDP5506 F7 User Manual

Rwegwistewr yo.uprhprioldiupctsa.ncd ogetmsup/psourtpatport  
BDP5506/F7  
BDP5506/F8  
EN User Manual  
FR Manuel d’Utilisation  
ES Manual del Usuario  
EN:For further assistance, call the customer support service in your country.  
To obtain assistance in the U.S.A., Canada, Puerto Rico, or the U.S.Virgin Islands, contact Philips  
Customer Care Center at 1-866-309-0866  
To obtain assistance in Mexico, contact Philips Customer Care Center at 01 800 504 62 00  
FR: Pour obtenir de l’aide supplémentaire, communiquez avec le centre de service à la clientèle de  
votre pays.  
Pour obtenir de l’aide aux États-Unis, au Canada, à Puerto Rico ou aux Îles Vierges américaines,  
communiquez avec le centre de service à la clientèle Philips au : 1-866-309-0866  
Pour obtenir l’aide au Mexique, entrez en contact avec le centre de soin de client de Philips à  
01 800 504 62 00  
ES: Para obtener más información, llame al servicio de soporte al cliente de su país.  
Para obtener asistencia en los Estados Unidos, en Canadá, Puerto Rico o en las IslasVírgenes de los  
Estados Unidos, comuníquese con Centro de atención al cliente de Philips al 1-866-309-0866  
Solo para Mexico CENTRO DE ATENCIÓN A CLIENTES LADA. 01 800 504 62 00 Solo  
Para México.  
Lea este manual antes de usar el product.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
RADIO-TV INTERFERENCE  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
This equipment has been tested and found to comply with  
the limits for a Class B digital device, pursuant to Part 15  
of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses,  
and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause  
harmful interference to radio communications. However,  
there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause  
harmful interference to radio or television reception,  
which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
7. Do not block any ventilation openings. Install in  
accordance with the manufacturer’s instructions.  
8. Do not install near any heat sources such as radiators,  
heat registers, stoves, or other apparatus (including  
amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized or  
grounding-type plug. A polarized plug has two blades  
with one wider than the other. A grounding type plug  
has two blades and a third grounding prong. The wide  
blade or the third prong are provided for your safety. If  
the provided plug does not fit into your outlet, consult  
an electrician for replacement of the obsolete outlet.  
1. Reorient or relocate the receiving antenna.  
2. Increase the separation between the equipment and  
receiver.  
3. Connect the equipment into an outlet on a circuit  
different from that to which the receiver is  
connected.  
10. Protect the power cord from being walked on or  
pinched particularly at plugs, convenience receptacles,  
and the point where they exit from the apparatus.  
4. Consult the dealer or an experienced radio/TV  
technician for help.  
11. Only use attachments/accessories specified by the  
manufacturer.  
This device complies with Industry Canada licence-exempt RSS  
standard(s). Operation is subject to the following two  
conditions: (1) this device may not cause interference, and (2)  
this device must accept any interference, including interference  
that may cause undesired operation of the device.  
12. Use only with the cart, stand, tripod, bracket, or table  
specified by the manufacturer, or sold  
with the apparatus. When a cart is used,  
use caution when moving the cart/  
apparatus combination to avoid injury  
from tip-over.  
This Class B digital apparatus complies with  
Canadian ICES-003.  
Disconnect the mains plug to shut off when find  
trouble or not in use. The mains plug shall remain  
readily operable.  
13. Unplug this apparatus during lightning storms or when  
unused for long periods of time.  
14. Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has been  
damaged in any way, such as power-supply cord or plug  
is damaged, liquid has been spilled or objects have fallen  
into the apparatus, the apparatus has been exposed to  
rain or moisture, does not operate normally, or has  
been dropped.  
CAUTION:  
Danger of explosion if battery is  
incorrectly replaced. Replace only with  
the same or equivalent type.  
WARNING: Batteries (Battery pack or battery  
installed) shall not be exposed to excessive  
heat such as sunshine, fire or the like.  
LASER SAFETY  
FCC WARNING  
This apparatus is classified as a CLASS 1 LASER PRODUCT.  
This apparatus employs a laser. Only a qualified service  
person should remove the cover or attempt to service  
this apparatus, due to possible eye injury.  
This equipment may generate or use radio frequency  
energy. Changes or modifications to this equipment may  
cause harmful interference unless the modifications are  
expressly approved in the manual. The user could lose the  
authority to operate this equipment if an unauthorized  
change or modification is made.  
CAUTION:  
Use of controls or adjustments or  
performance of procedures other than  
those specified herein may result in  
hazardous radiation exposure.  
This transmitter must be co-located or operated in  
conjunction with any other antenna or transmitter.  
EN - 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notice for Progressive Scan Output  
IMPORTANT COPYRIGHT INFORMATION  
Consumers should note that not all high definition  
television sets are fully compatible with this product  
and may cause artifacts to be displayed in the picture. In  
case of picture problems with 525(480) progressive  
scan output, it is recommended that the user switch the  
connection to the ‘standard definition’ output. If there  
are questions regarding your TV set compatibility with  
this 525p(480p) Blu-ray Disc™/DVD player, please  
contact our customer service center.  
Unauthorized copying, broadcasting, public performance  
and lending of discs are prohibited.  
This item incorporates copy protection technology that is  
protected by U.S. patents and other intellectual property  
rights of Rovi Corporation. Reverse engineering and  
disassembly are prohibited.  
Do not place the unit on the furniture that is capable of  
being tilted by a child and an adult leaning, pulling, standing  
or climbing on it. A falling unit can cause serious injury or  
even death.  
ENERGY STAR® is a joint program of the  
U.S. Environmental Protection Agency  
and the U.S. Department of Energy  
helping us all save money and protect the  
environment through energy efficient  
products and practices.  
This apparatus should not be placed in a built-in  
installation such as a bookcase or rack unless proper  
ventilation is provided. Make sure to leave a space of 3.9  
inches (10cm) or more around this apparatus.  
To Avoid the Hazards of Electrical Shock and Fire  
1.2. Maintenance  
Do not handle the AC power cord with wet hands.  
Do not pull on the AC power cord when disconnecting  
it from an AC outlet. Grasp it by the plug.  
Servicing  
Please refer to relevant topics on  
“TROUBLESHOOTING” on page 51 before returning  
the product.  
Do not put your fingers or objects into the unit.  
Location and Handling  
If you need to call a customer service representative,  
please know the model number and serial number of  
your product before you call. This information is  
displayed on the back of the product. Also, please take  
a moment to identify the problem you are having, and  
be prepared to explain this to the representative. If you  
believe the representative will need to help you with  
operations, please stay near the product. Our  
representatives will be happy to assist you. For online  
reference, please visit our website at  
Do not install the unit in direct sunlight, near strong  
magnetic fields, or in a place subject to dust or strong  
vibration.  
Avoid a place with drastic temperature changes.  
Install the unit in a horizontal and stable position. Do  
not place anything directly on top or bottom of the  
unit. Depending on your external devices, noise or  
disturbance in the picture and/or sound may be  
generated if the unit is placed too close to them. In this  
case, please ensure enough space between the external  
devices and the unit.  
Depending on the environment, the temperature of this  
unit may increase slightly. This is not a malfunction.  
Cleaning the Cabinet  
Wipe the front panel and other exterior surfaces of the  
unit with a soft cloth.  
Be sure to remove the disc and unplug the AC power  
cord from the outlet before carrying the unit.  
Never use a solvent, thinner, benzene or alcohol to  
clean the unit. Do not spray insecticide liquid near the  
unit. Such chemicals may discolor the surface or  
damage the unit.  
Dew Condensation Warning  
Dew condensation may form inside the unit in the  
following conditions. If so, do not use this unit at least  
for a few hours until its inside gets dry.  
Cleaning Discs  
- The unit is moved from a cold place to a warm place.  
- Under conditions of high humidity.  
- After heating a cold room.  
When a disc becomes dirty, clean it with a cleaning  
cloth. Wipe the disc from the center to outside. Do not  
wipe in a circular motion.  
Do not use solvents such as benzine, thinner,  
commercially available cleaners, detergent, abrasive  
cleaning agents or antistatic spray intended for analog  
records.  
EN - 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Cleaning the Disc Lens  
1.3. Notice  
If this unit still does not perform properly although you  
refer to the relevant sections and to  
Specifications are subject to change without notice.  
Trademarks are the property of Koninklijke Philips  
Electronics N.V. or their respective owners. P&F USA  
reserves the right to change products at any time without  
being obliged to adjust earlier supplies accordingly.  
The material in this manual is believed adequate for the  
intended use of the system. If the product, or its individual  
modules or procedures, are used for purposes other than  
those specified herein, confirmation of their validity and  
suitability must be obtained. P&F USA warrants that the  
material itself does not infringe any United States patents.  
No further warranty is expressed or implied. P&F USA  
cannot be held responsible neither for any errors in the  
content of this document nor for any problems as a result  
of the content in this document. Errors reported to P&F  
USA will be adapted and published on the P&F USA support  
website as soon as possible.  
“TROUBLESHOOTING” in this user manual, the laser  
optical pickup unit may be dirty. Consult your dealer or  
an Authorized Service Center for inspection and  
cleaning of the laser optical pickup unit.  
Disc Handling  
Handle the discs so that fingerprints and dust do not  
adhere to the surfaces of the discs.  
Always store the disc in its protective case when it is  
not used.  
Note that discs with special shapes (heart-shaped discs,  
octagonal discs, etc.) cannot be played back on this unit.  
Do not attempt to play such discs, as they may damage  
the unit.  
Testing the Remote Control  
Warranty  
If the remote control is not working properly, you can  
use a digital camera (including a cellular phone with  
built-in camera) to see if it is sending out an infrared  
signal.  
No components are user serviceable. Do not open or  
remove covers to the inside of the product. Repairs may  
only be done by Service Centers and official repair shops.  
Failure to do so shall void any warranty, stated or implied.  
Any operation expressly prohibited in this manual, any  
adjustments, or assembly procedures not recommended or  
authorized in this manual shall void the warranty.  
How to perform the test?  
1. Point the IR transmitter of the  
remote control towards the lens of  
the digital camera (or cell phone  
camera).  
1.4. Important  
2. Turn on the digital camera and  
look at the IR transmitter of the  
remote control through the LCD  
display of the digital camera.  
Registering your model with Philips makes you eligible for  
all of the valuable benefits listed below, so don’t miss out.  
Complete and return your Product Registration Card at  
once, or register online at www.philips.com/support to  
ensure :  
3. While looking at the LCD, press  
the buttons on your remote  
control you want to test.  
Product Safety Notification  
a. If your remote control is  
working properly, the IR  
transmitter of the remote  
control will create a noticeable  
flash on the LCD of the digital  
camera.  
By registering your product you receive notification  
- directly from the manufacturer - in the rare case of a  
product recall or safety defect.  
Additional Benefits of Product Ownership  
b. If it does not flash, replace the  
batteries in your remote with  
new batteries and try again. If it  
still does not flash, your  
Registering your product guarantees that you receive all of  
the privileges to which you’re entitled, including special  
money-saving offers.  
For further assistance  
remote control may be  
damaged or defective. Please  
contact customer service for  
replacement options.  
For further assistance, call the customer support service in  
your country.  
To obtain assistance in the U.S.A., Canada, Puerto Rico,  
or the U.S. Virgin Islands, contact Philips Customer  
Care Center at 1-866-309-0866  
EN - 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Environmental Care  
1.6. Trademark Information  
The packaging of this product is  
intended to be recycled.  
Contact your local authorities  
for information about how to  
recycle the packaging.  
For Product recycling  
information, please visit -  
Manufactured under license from Dolby Laboratories.  
“Dolby” and the double-D symbol are trademarks of  
Dolby Laboratories.  
End of life directives  
Philips pays a lot of attention to  
produce environment-friendly  
products in green focal areas.  
Your new Blu-ray Disc™ Player  
contains materials which can be  
recycled and reused. At the end  
of its life, specialized companies  
can dismantle the discarded  
Blu-ray Disc™ Player to  
Manufactured under license under U.S. Patent #'s:  
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616;  
6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 &  
other U.S. and worldwide patents issued & pending. DTS  
and the Symbol are registered trademarks, & DTS-HD,  
DTS-HD Master Audio | Essential and the DTS logos are  
trademarks of DTS, Inc.  
concentrate the reusable  
materials and to minimize the  
amount of materials to be  
disposed of. Please ensure you  
dispose of your old Blu-ray  
Disc™ Player according to local  
regulations.  
Product includes software.  
© DTS, Inc. All Rights Reserved.  
Disposal of used batteries  
The batteries supplied do not contain the heavy metals  
mercury and cadmium. Nevertheless, in many areas  
batteries may not be disposed of with your household  
waste. Please ensure you dispose of batteries according to  
local regulations.  
HDMI, the HDMI Logo, and High-Definition Multimedia  
Interface are trademarks or registered trademarks of  
HDMI Licensing LLC in the United States and other  
countries.  
1.5. Supplied Accessories  
Remote Control  
Batteries (AAA, 1.5V x 2)  
User Manual  
“x.v.Color” and “x.v.Color” logo are trademarks of Sony  
Corporation.  
Quick Start Guide  
Registration card  
Box-inserts  
Audio / video cables  
Java and all Java based trademarks and logos are  
trademarks or registered trademarks of Oracle and/or its  
affiliates.  
EN - 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Windows Media and the Windows logo are trademarks  
or registered trademarks of Microsoft Corporation in the  
United States and/or other countries.  
Pandora is a registered trademark of Pandora Media, Inc.  
“AVCHD” and the “AVCHD” logo are trademarks of  
Panasonic Corporation and Sony Corporation.  
“Blu-ray 3D™” and “Blu-ray 3D™” logo are trademarks  
of the Blu-ray Disc Association.  
“BONUSVIEW™” and “BONUSVIEW™” logo are  
trademarks of the Blu-ray Disc Association.  
“Blu-ray Disc™”, “Blu-ray™” and “Blu-ray Disc™” logo  
are trademarks of the Blu-ray Disc Association.  
“BD-Live™” and “BD-Live™” logo are trademarks of the  
Blu-ray Disc Association.  
is a trademark of DVD Format/Logo Licensing  
Corporation.  
Netflix and the Netflix logo are trademarks or registered  
trademarks of Netflix, Inc.  
Kodak and KODAK Picture CD Compatible are  
trademarks of Kodak used under license.  
Film Fresh and the Film Fresh logo are registered  
trademarks of Film Fresh Inc.  
The Wi-Fi CERTIFIED Logo is a certification mark of the  
Wi-Fi Alliance.  
BLOCKBUSTER name, design and related marks are  
trademarks of Blockbuster Inc.  
VUDU™ is a trademark of VUDU, Inc.  
EN - 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Switching Audio Soundtrack........................................ 34  
Switching Camera Angles ............................................. 34  
Philips Wireless MediaConnect .................................. 36  
Safety Instructions............................................................. 2  
Maintenance ....................................................................... 4  
Important............................................................................ 5  
Front Panel....................................................................... 11  
CONNECTIONS......................................................... 15  
PANDORA OPERATIONS........................................ 37  
Connection to an Audio System................................. 16  
Adding Pandora User Accounts.................................. 37  
HDMI Video..................................................................... 42  
Network Installation...................................................... 43  
Restore Default Settings............................................... 50  
BASIC PLAYBACK ...................................................... 26  
TROUBLESHOOTING............................................... 51  
Playing Back a Disc ......................................................... 26  
Playing Back a Blu-ray 3D™ Disc................................ 28  
Playing Back Contents on a USB Storage Device.... 29  
Using the Title / Disc / Pop-up Menu......................... 29  
Contact Us....................................................................... 54  
GLOSSARY .................................................................... 55  
IMPORTANT HEALTH AND SAFETY  
INFORMATION FOR 3D TELEVISIONS............... 60  
ONE (1) YEAR LIMITED WARRANTY.................. 61  
LICENSE......................................................... end of book  
EN - 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Easy and simple connection to your HDTV via  
HDMI  
2. FEATURES  
Connect your BDP5506 to your HDTV with one single  
HDMI (High-Definition Multimedia Interface) cable. Philips  
recommends High Speed HDMI cable for better  
compatibility. The high definition video output signal will be  
transferred to your HDTV without conversion to analog  
signals, so you will get excellent picture and sound quality,  
completely free from noise. Thanks to other multiple  
outputs, you can also easily connect to your home theater  
system or amplifier.  
Congratulations on your purchase, and welcome to Philips!  
To fully benefit from the support that Philips offers, register  
2.1. Features  
Blu-ray Disc™  
You can enjoy Blu-ray Disc™ which is capable of storing  
five times more data than a conventional DVD.  
About EasyLink (HDMI CEC) (Consumer  
Electronics Control)  
Playing back Blu-ray 3D™ Disc  
EasyLink allows you to operate the linked functions of this  
This unit can play back Blu-ray 3D™ discs which contain  
stereoscopic 3D video. In order to enjoy 3D video,  
connect this unit to a 3D capable TV using a 3D compatible  
HDMI cable.  
player with Philips brand TV with EasyLink feature.  
Philips does not guarantee 100 % interoperability with other brands  
of HDMI CEC compliant devices.  
PiP (BONUSVIEW™)  
BD-Java  
Some BD-videos have the PiP function which enables you  
to display the secondary video in the primary video. You  
can call up the secondary video by pressing  
[BONUSVIEW (PiP)] whenever the scene contains a  
secondary video.  
With some Blu-ray™ discs which contain Java applications,  
you can enjoy interactive functions such as games or  
interactive menus.  
DVD upscaling for enhanced picture quality  
BD-Live™  
Your current DVD will look even better than before thanks  
to video upscaling. Upscaling will increase the resolution of  
standard definition DVD to high definition up to 1080p  
over an HDMI connection. The picture will be less jagged  
and more realistic for a near high definition experience.  
BD-Live™ (BD-ROM version 2 Profile 2.0) that allows  
interactive functions to be used when this unit is connected  
to the Internet in addition to the BONUSVIEW™ function.  
The various functions differ depending on the disc.  
Pop-up menu  
Enjoy your content on different kinds of media  
Some BD-videos have a pop-up menu which is a navigation  
menu that can be called up and be operated on the TV screen  
without interrupting playback. You can call up the pop-up  
Full backwards compatibility with DVD, CD and USB  
storage device ensures that you can continue to enjoy your  
current audio-video collection. Additionally, you can enjoy  
AVCHD / MP3 / WMA / JPEG files.  
menu by pressing [DISC MENU / POP-UP MENU]  
Contents in the pop-up menu vary depending on the disc.  
Listen to rich multi-channel surround sound  
HDMI Deep Color  
Multi-channel surround sound, which realizes real-to-life  
sound and makes you feel that you are really there.  
Deep Color reduces posterization (color banding) effect of  
the playback image. Refer to “HDMI Deep Color” on page 39.  
Intuitive user interface and remote control  
HDMI 1080p/24 output (Blu-ray Disc™ only)  
The Philips logical user interface allows you to easily  
navigate through your content and settings, so you can  
quickly find what you are looking for.  
This unit is equipped with the feature which can provide  
smooth movement during playback of film originated  
material with the frame rate of 24 frames per second with  
progressive. (Available only when the display device is  
connected by an HDMI cable.) Refer to “HDMI Video” on  
page 42.  
EN - 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Playing back contents on a USB storage device  
2.2. Version Info  
You can play back MP3 / WMA / JPEG files stored in a USB  
storage device. BD-ROM Profile 2.0 (BD-Live™) and  
Profile 1.1 discs sometimes store picture-in-picture  
commentary, subtitles or other extras in the USB storage  
device for use during playback with the BD-video.  
“Version Info” screen provides information about this unit’s  
software version.  
You can also download the latest software from the Philips  
website and update it yourself if it is newer than the version  
currently on your unit. The current version of software on  
your unit can be seen on the “Version Info” screen.  
Playing back AVCHD files  
This unit supports playback of AVCHD format files (new  
format for high definition video camcorders) recorded on  
disc. Your high definition personal archive is playable in HD  
quality.  
To access “Version Info”, follow the procedure below.  
1. Press [ (home)].  
2. Use [K / L / s / B] to select “Setup”, then press  
[OK].  
3. Use [K / L] to select “Advanced Setup”, then press  
x.v.Color  
[OK].  
This unit supports playback of video contents on discs  
recorded with “x.v.Color” technology. To watch this video  
content with the “x.v.Color” space, a TV or other display  
device supporting both video image reproduction using  
“x.v.Color” standard and capability of manual switching of  
its color space setting is required. Please refer to the user  
manual of your display device for further information.  
4. Use [K / L] to select “Version Info”, then press [OK].  
2.3. Symbols Used in this User Manual  
To specify which media type each function is applicable to,  
we put the following symbols at the beginning of each item  
to operate.  
Netflix  
With this unit, you can enjoy movies and TV episodes  
streamed instantly from Netflix via the Internet. In order to  
use this feature, you must visit netflix.com/Philips on your  
PC and become a Netflix member.  
Symbol Description  
Description refers to BD-video  
Description refers to DVD-video  
Description refers to audio CD / DTS-CD  
(This feature is available only in the United States.)  
Film Fresh / Blockbuster  
With this unit, you can enjoy movies and TV episodes  
streamed instantly from Film Fresh / Blockbuster via the  
Internet. In order to use this feature, you must visit  
following website on your PC and become a Film Fresh /  
Blockbuster member. (This feature is available only in the  
United States.)  
Description refers to DVD-RW/-R with  
AVCHD files  
Description refers to BD-RE/-R, DVD-RW/-R,  
CD-RW/-R and USB storage device with MP3  
files  
Description refers to BD-RE/-R, DVD-RW/-R,  
CD-RW/-R and USB storage device with  
Windows Media™ Audio files  
- Film Fresh : filmfresh.roxionow.com/Login  
Description refers to BD-RE/-R, DVD-RW/-R,  
CD-RW/-R and USB storage device with JPEG  
files  
VUDU  
This unit supports VUDU which is the leading HD on-  
demand video service. With VUDU, you can also enjoy  
various kinds of Internet applications. In order to use this  
feature, you must connect this unit to the Internet.  
For complete instructions on using VUDU service, please  
online manual.  
If you do not find any of the symbols listed above under the  
function heading, the operation is applicable to all media.  
(This feature is available only in the United States.)  
Pandora  
This unit supports Pandora Internet radio service. You can  
instantly listen to personalized radio stations streamed over  
the Internet from Pandora.  
(This feature is available only in the United States.)  
EN - 10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
3.2. Rear Panel  
3. FUNCTIONAL OVERVIEW  
1
2
3
4
3.1. Front Panel  
1
2
3
4
5
6
7
8
6 5  
1. HDMI OUT jack  
• Use to connect to a display with an HDMI compatible  
port with an HDMI cable.  
1. Q (standby/on) button  
• Touch to turn on the unit, or to switch the unit into  
standby mode. (To completely turn off the unit, you  
must unplug the AC power cord.)  
2. LAN terminal  
• Use to connect to network provisioning equipment  
such as a router or a modem with a LAN cable.  
• Touch and hold for 10 seconds to shut down the  
unit.  
3. DIGITAL OUT (COAXIAL) jack  
• Use to connect an AV receiver / amplifier,  
Dolby Digital / DTS decoder or to another device  
with a digital audio coaxial input jack with a digital  
audio coaxial cable.  
2. B (play) button  
• Touch to start or resume playback.  
3. C (stop) button  
4. AC power cord  
• Touch to stop playback.  
• Connect to a standard AC outlet to supply power to  
this unit.  
4. A (open/close) button  
• Touch to open or close the disc tray.  
5. Disc tray  
• Unplug this cord from the AC outlet to completely  
turn off the unit.  
• Place a disc after opening the disc tray.  
6. Infrared sensor window  
5. VIDEO OUT jack  
• Use to connect a TV monitor, an AV receiver /  
amplifier or to another device with a video cable.  
• Receives signals from your remote control so that  
you can control the unit from a distance.  
6. AUDIO OUT jacks  
7. Display panel  
• Use to connect a TV monitor, an AV receiver /  
amplifier or to another device with an audio cable.  
• Refer to “Display Panel” on page 14.  
8. USB input  
C Caution  
• Connect a USB storage device or USB card reader.  
Do not touch the inner pins of the jacks on the rear  
panel. Electrostatic discharge may cause permanent  
damage to the unit.  
C Caution  
Do not connect any device other than USB storage  
device or USB card reader into USB input. (e.g. PC,  
external HDD, MP3 player, digital camera, keyboard,  
mouse, etc.)  
This unit does not have an RF modulator.  
Do not use an extension cord or USB hub to connect  
devices to this unit. Always connect one single USB  
storage device or USB card reader into USB input  
directly.  
D Note  
Due to new ENERGY STAR® requirements, this unit  
will automatically enter standby mode after 25 minutes  
of inactivity.  
EN - 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
6. DISC MENU / POP-UP MENU button  
3.3. Remote Control  
Blu-ray Disc™:  
• Press to display the pop-up menu.  
DVD:  
1
2
3
4
29  
28  
• Press to display the disc menu.  
7. K / L / s / B buttons  
• Press to select items or settings.  
8. OK button  
5
6
27  
• Press to confirm or select menu items.  
9. BACK U button  
7
8
9
• Press to return to the previously displayed menu or  
screen function.  
26  
25  
24  
10*  
11  
10. B (play) button*  
• Press to start playback or resume playback.  
11. S (previous) button  
12  
13  
23  
22  
• During playback, press once to return to the  
beginning of the current title, chapter, track or file.  
21  
14  
15*  
• During playback, press twice to return to the  
previous title, chapter, track or file.  
16  
• During the JPEG playback, press to return to the  
previous file.  
17  
18  
20  
19  
12. E (reverse) button  
• During playback, press to fast reverse the playback.  
13. C (stop) button  
• Press to stop playback.  
14. TV VOL
؀
 /
؁
 button  
* The unit can also be turned on by pressing these  
buttons.  
• Press to adjust the TV volume (only applicable to the  
Philips brand TV).  
1. Q (standby/on) button  
15. A (open/close) button*  
• Press to open or close the disc tray.  
16. Number buttons  
• Press to turn on the unit, or to switch the unit into  
standby mode. (To completely turn off the unit, you  
must unplug the AC power cord.)  
• Press to select a chapter during playback.  
• Press to enter numbers and letters in the input field.  
17. SUBTITLE button  
2. BONUSVIEW (PiP) button  
• Press to switch picture in picture feature on/off (only  
applicable to BD-video which supports the PiP  
(BONUSVIEW™) function).  
• Press to select subtitles on a disc.  
18. ANGLE button  
3. OPTION button  
• Press to select camera angles on a disc.  
19. HDMI button  
• During playback, press to display the play menu.  
4. Red / Green / Blue / Yellow buttons  
• Press to set the HDMI output mode.  
20. AUDIO button  
• Press to activate shortcut keys on some BD-video  
functions.  
• When file list is shown, press to switch between  
pages.  
• Press to select the audio channel (such as audio  
languages) on a disc.  
5.  
(home) button  
• Press to display the home menu.  
EN - 12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
21. TV CH
؀
 /
؁
 button  
C Caution  
• Press to change the channel up and down (only  
applicable to the Philips brand TV).  
Incorrect use of batteries can result in hazards such as  
leakage and bursting. Please observe the following:  
22. d (mute) button  
Do not mix alkaline, standard (carbon-zinc), or  
rechargeable (ni-cad, ni-mh, etc) batteries.  
• Press to mute the TV volume (only applicable to the  
Philips brand TV).  
Do not mix new and old batteries together.  
23. D (forward) button  
Do not use different kinds of batteries together.  
Although they may look similar, different batteries may  
have different voltages.  
• During playback, press to fast forward the playback.  
• When playback is in pause, press to slow forward the  
playback.  
Make sure that the + and - ends of each battery match  
the indications in the battery compartment.  
24. T (next) button  
Remove batteries from battery compartment, when the  
remote is not going to be used for a month or more.  
• During playback, press to skip to the next chapter,  
track or file.  
When disposing of used batteries, please comply with  
governmental regulations or environmental public rules  
that apply in your country or area.  
• When playback is in pause mode, press to forward  
the playback picture by picture.  
25. F (pause) button  
Do not recharge, short-circuit, heat, burn or  
disassemble batteries.  
• Press to pause playback.  
26. Net-TV button  
• Press to display the network media mode menu.  
27. TOP MENU button  
Using the Remote Control  
Remote Control Usage Guidelines:  
Blu-ray Disc™:  
Make sure that there are no obstacles between the  
remote control and the infrared sensor window on the  
unit.  
• Press to display the top menu.  
DVD:  
Remote operation may become unreliable if strong  
sunlight or fluorescent light is shining on the infrared  
sensor window of the unit.  
• Press to display the title menu.  
28. INFO button  
Remote controls of different devices can interfere with  
each other. Avoid using a remote control from another  
device which is located close to the unit.  
• Press to display the information display.  
29. REPEAT button  
• Press to select repeat mode.  
Replace the batteries when you notice a fall-off in the  
operating range of the remote control.  
Installing the Batteries in the Remote Control  
The maximum operable ranges from the unit are as  
follows.  
Install 2 AAA (1.5V) batteries matching the polarity  
indicated inside battery compartment of the remote  
control.  
- Line of sight:  
approx. 23 feet (7 m)  
- Either side of the center:  
approx. 16 feet (5 m) within 30°  
- Above:  
approx. 16 feet (5 m) within 15°  
- Below:  
approx. 10 feet (3 m) within 30°  
30˚  
30˚  
16 feet (5 m)  
16 feet (5 m) 23 feet (7 m)  
EN - 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup Menu  
3.4. Display Panel  
Display panel shows playback status or information (e.g.  
elapsed playing time, repeat type, menu type, etc. ).  
1
3D Output  
Auto (3D)  
Video Setup  
2
TV Display  
16:9 Widescreen  
Audio Setup  
HDMI Video  
Auto  
Auto  
Auto  
Network Setup  
HDMI Deep Color  
De-interlacing Mode  
EasyLink Setup  
Preference Setup  
Advanced Setup  
* Brightness of the display can be adjusted. Refer to  
“Display Panel” in “LIST OF SETTINGS” on page 41.  
1. Category  
e.g.)  
2. Menus / Options :  
Indicating the elapsed time of  
playback.  
Displays options for the highlighted item on the left  
whenever available  
Current chapter is in chapter  
repeat mode during playback of  
disc.  
Play Menu  
Loading a disc, USB storage device  
or USB card reader.  
During playback, press [OPTION] to display the play  
menu.  
Home menu is displayed.  
e.g.) Blu-ray Disc™  
Network media mode menu is  
displayed.  
Search  
Audio  
Subtitle  
3.5. Guide to On-Screen Display  
Repeat  
Black Level  
Noise Reduction  
Home Menu  
When you turn on the unit, home menu will appear  
automatically. Otherwise, press [ (home)].  
Play Disc  
Browse USB  
Browse Net TV  
MediaConnect  
Setup  
“Play Disc”  
: Initiates playback of inserted disc,  
displays a list of tracks / files or the  
media filter menu  
“Browse USB”  
: Displays a list of tracks / files on  
the connected USB storage device  
or the media filter menu  
“Browse Net TV” : To access the menu of network  
services  
“MediaConnect” : To access the Philips Wireless  
MediaConnect menu  
“Setup”  
: To access setup menu  
EN - 14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
4. CONNECTIONS  
4.1. HDMI Video / Audio Connection  
(Supports up to 1080i(*1), 1080p(*2), 1080p/24 resolution.)  
Your TV  
HDMI cable  
(not supplied)  
HDMI IN  
HDMI OUT  
No analog audio connection required.  
(*1)  
1080i : Outputs video data with a frame rate of 30 frames per second.  
1080p : Outputs video data with a frame rate of 60 frames per second.  
(*2)  
Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the connector  
are matched.  
When connected to an HDCP incompatible display device, the picture will not be displayed properly.  
Use an HDMI cable with the HDMI logo (a certified HDMI cable) for this connection. High Speed HDMI cable (also  
known as HDMI category 2 cable) is recommended for better compatibility.  
To enjoy Blu-ray 3D™ video, connect this unit to a 3D capable TV using a 3D compatible HDMI cable.  
4.2. Standard Video + Standard Audio Connection  
(Supports only 480i resolution.)  
Your TV  
L
L
VIDEO IN  
AUDIO IN  
Video cable (supplied)  
R
R
AUDIO  
OUT  
VIDEO  
OUT  
Audio cable (supplied)  
Connect this unit directly to the TV. If the audio / video cables are connected to a VCR then the pictures may be  
distorted due to the copyright protection system.  
EN - 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
4.3. Connection to an Audio System  
When you change the connections, all devices should be turned off.  
When making connections with external devices, please refer to their user manuals for additional setup help.  
2-Channel Analog Audio Connection  
Digital Audio Connection  
Stereo system with  
analog audio input jacks  
AUDIO IN  
AV receiver / amplifier with a  
digital audio coaxial input jack  
R
L
DIGITAL AUDIO INPUT  
COAXIAL  
Audio cable  
(supplied)  
Digital audio coaxial cable  
(not supplied)  
L
COAXIAL  
DIGITAL OUT  
PCM/BITSTREAM  
R
AUDIO  
OUT  
HDMI Audio Connection  
AV receiver / amplifier with an HDMI input jack  
HDMI IN  
HDMI cable  
(not supplied)  
HDMI OUT  
EN - 16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Audio Output from AUDIO OUT jacks  
“Blu-ray Disc Audio” setting A  
“Primary Audio Only”  
“Mix Audio Output”  
Media  
Audio Source  
Dolby Digital  
DownMix 2ch LPCM  
DownMix 2ch LPCM  
DownMix 2ch LPCM*1  
DownMix 2ch LPCM*2  
Dolby Digital Plus  
Dolby TrueHD  
DTS®  
DTS-HD®  
LPCM  
DownMix 2ch LPCM*3  
DownMix 2ch LPCM  
DownMix 2ch LPCM*4  
DownMix 2ch LPCM  
BD-video  
DownMix 2ch LPCM*1  
DownMix 2ch LPCM  
DownMix 2ch LPCM*5  
DownMix 2ch LPCM  
Dolby Digital  
DTS®  
LPCM  
DownMix 2ch LPCM  
DownMix 2ch LPCM  
2ch LPCM  
DVD-video  
DTS-CD  
AVCHD  
DTS®  
Dolby Digital  
LPCM  
DownMix 2ch LPCM  
DownMix 2ch LPCM  
DownMix 2ch LPCM  
2ch LPCM  
Audio CD  
MP3  
LPCM  
MP3  
2ch LPCM  
Windows Media™ Audio  
Netflix  
WMA  
2ch LPCM  
WMA  
2ch LPCM  
Film Fresh  
AAC  
2ch LPCM  
Blockbuster  
AAC  
2ch LPCM  
DownMix 2ch LPCM*1  
2ch LPCM  
Dolby Digital Plus  
MP3  
VUDU  
Pandora  
MP3  
2ch LPCM  
*1)  
Fully decoded.  
*2)  
Only the independent substream is decoded.  
Dolby TrueHD stream is decoded.  
*3)  
*4)  
*5)  
Only the Dolby Digital substream is decoded.  
Only the core substream is decoded.  
EN - 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Audio Output from DIGITAL OUT (COAXIAL) jack  
“Digital Audio”  
“Bitstream”  
“LPCM”  
setting A  
“Blu-ray Disc Audio” “Primary Audio  
“Mix Audio  
Output”  
“Primary Audio Only” “Mix Audio Output”  
setting A  
Only”  
Media  
Audio Source  
Dolby Digital  
Dolby Digital  
Dolby Digital  
DownMix 2ch LPCM  
DownMix 2ch LPCM*1 DownMix 2ch LPCM*2  
Dolby Digital Plus  
DownMix 2ch LPCM*3 DownMix 2ch LPCM*4  
DownMix 2ch LPCM  
Dolby TrueHD  
DTS®  
Dolby Digital  
DTS®  
BD-video  
DownMix 2ch LPCM*1 DownMix 2ch LPCM*5  
DownMix 2ch LPCM  
DownMix 2ch LPCM  
DownMix 2ch LPCM  
2ch LPCM  
DownMix 2ch LPCM  
DownMix 2ch LPCM  
DownMix 2ch LPCM  
2ch LPCM  
2ch LPCM  
2ch LPCM  
2ch LPCM  
2ch LPCM  
DTS-HD®  
LPCM  
Dolby Digital  
DTS®  
LPCM  
DTS®  
Dolby Digital  
LPCM  
LPCM  
DTS®  
DownMix 2ch LPCM  
Dolby Digital  
DTS®  
2ch LPCM  
DTS®  
Dolby Digital  
DownMix 2ch LPCM  
2ch LPCM  
2ch LPCM  
2ch LPCM  
2ch LPCM  
2ch AAC  
DVD-video  
DTS-CD  
AVCHD  
Audio CD  
MP3  
MP3  
Windows Media™ Audio WMA  
Netflix  
Film Fresh  
Blockbuster  
WMA  
AAC  
AAC  
2ch AAC  
2ch LPCM  
DownMix 2ch LPCM*1  
2ch LPCM  
Dolby Digital Plus  
Dolby Digital  
2ch LPCM  
2ch LPCM  
VUDU  
MP3  
MP3  
Pandora  
2ch LPCM  
*1  
) Fully decoded.  
*2  
*3  
*4  
*5  
) Only the independent substream is decoded.  
) Dolby TrueHD stream is decoded.  
) Only the Dolby Digital substream is decoded.  
) Only the core substream is decoded.  
D Note  
When playing back a BD-video which only contains the primary audio, the audio output will be the same case as  
“Primary Audio Only” even if “Blu-ray Disc Audio” is set to “Mix Audio Output”.  
If the connected device is not compatible with AAC, audio will be output as LPCM depending on the capability of the  
connected device.  
EN - 18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Audio Output from HDMI OUT jack  
“HDMI Audio”  
setting A  
“Bitstream”  
“LPCM”  
“Off”  
“Blu-ray Disc Audio”  
“Primary Audio  
Only”  
“Mix Audio  
Output”  
“Primary Audio  
Only”  
“Mix Audio  
Output”  
Regardless  
setting A  
Media  
Audio Source  
Which audio format can be output depends on the compatibility of the connected  
device.  
Dolby Digital  
Dolby Digital  
Multi LPCM  
Multi LPCM*1 Multi LPCM*2  
Mute  
Mute  
Dolby Digital Plus  
Dolby Digital Plus Dolby Digital  
Multi LPCM*3 Multi LPCM*4  
Multi LPCM  
Dolby TrueHD  
DTS®  
Dolby TrueHD  
DTS®  
Dolby Digital  
Mute  
Mute  
Mute  
Mute  
Mute  
Mute  
Mute  
Mute  
Mute  
Mute  
Mute  
Mute  
Mute  
Mute  
Mute  
Mute  
Mute  
Mute  
Mute  
BD-video  
Multi LPCM*1 Multi LPCM*5  
Multi LPCM  
Multi LPCM  
Multi LPCM  
2ch LPCM  
Multi LPCM  
Multi LPCM  
Multi LPCM  
2ch LPCM  
2ch LPCM  
2ch LPCM  
2ch LPCM  
2ch LPCM  
DTS-HD®  
LPCM  
Dolby Digital  
DTS®  
LPCM  
DTS®  
Dolby Digital  
LPCM  
LPCM  
DTS-HD®  
Multi LPCM  
Dolby Digital  
DTS®  
2ch LPCM  
DTS®  
Dolby Digital  
Multi LPCM  
2ch LPCM  
2ch LPCM  
2ch LPCM  
2ch LPCM  
2ch AAC  
DTS®  
DVD-video  
DTS-CD  
AVCHD  
Audio CD  
MP3  
MP3  
Windows Media™ Audio WMA  
Netflix  
Film Fresh  
Blockbuster  
WMA  
AAC  
AAC  
2ch AAC  
2ch LPCM  
Multi LPCM*1  
2ch LPCM  
2ch LPCM  
Dolby Digital Plus  
Dolby Digital Plus  
2ch LPCM  
2ch LPCM  
VUDU  
MP3  
MP3  
Pandora  
*1  
) Fully decoded.  
*2  
*3  
*4  
*5  
) Only the independent substream is decoded.  
) Dolby TrueHD stream is decoded.  
) Only the Dolby Digital substream is decoded.  
) Only the core substream is decoded.  
D Note  
If the connected device is not compatible with HDMI BITSTREAM, audio will be output as multi LPCM or 2-channel  
down-mixed LPCM depending on the capability of the connected device even if you select “Bitstream” in “HDMI  
Audio” setting.  
If the connected device is not compatible with AAC, audio will be output as LPCM depending on the capability of the  
connected device.  
When playing back a BD-video which only contains the primary audio, the audio output will be the same case as  
“Primary Audio Only” even if “Blu-ray Disc Audio” is set to “Mix Audio Output”.  
EN - 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.4. Connection to the Network  
By connecting this unit to the Internet, you can update the software via the Internet or access BD-Live™, Netflix, Film  
Fresh, Blockbuster, VUDU and Pandora services.  
D Note  
For a stable connection, wired connection is recommended when using following features. (Using following features  
with Wi-Fi connection can be affected by other devices using radio frequencies.)  
- Video streaming services (Netflix / Film Fresh / Blockbuster / VUDU)  
- Listening to Internet radio (Pandora)  
- Network update  
Wired Connection  
Broadband router or hub  
Networking equipment (modem, etc.)  
WAN  
LAN  
LAN  
5
4
3
2
1
LAN cable (not supplied)  
LAN cable (not supplied)  
Internet  
LAN  
C Caution  
Do not insert any cable other than a LAN cable to the LAN terminal to avoid damaging the unit.  
Do not connect your PC directly to the LAN terminal of this unit.  
D Note  
After you make a wired connection, set up necessary network settings.  
(For network setting of wired connection, refer to “Wired” on page 44.)  
If your modem does not have router functions, connect a wired router.  
If your modem has router functions but there is no vacant port, add a hub.  
For a wired router, use a router which supports 10BASE-T / 100BASE-TX ETHERNET standard.  
Please purchase shielded LAN cables at your local store and use them when you connect to network equipment.  
EN - 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Wi-Fi Connection  
Networking equipment (modem, etc.)  
Internet  
LAN  
WAN  
Wi-Fi router  
LAN cable (not supplied)  
D Note  
After you made the Wi-Fi connection, set up necessary network settings.  
(For the network setting of Wi-Fi connection, refer to “Wireless” on page 46.)  
For a Wi-Fi router, use a router which supports IEEE 802.11 b/g/n.  
(“n” type is recommended for stable operation of the Wi-Fi network.)  
Set the Wi-Fi router to Infrastructure mode. This unit does not support Ad-hoc mode.  
Other radio devices or obstacles may cause interference to the Wi-Fi network connection.  
EN - 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.2. Initial Setup  
5. BEFORE YOU START  
Please follow the instructions below to complete the initial  
setup.  
5.1. Finding the Viewing Channel /  
Source on Your TV  
1. While welcome screen is displayed, use [K / L] to  
select “Next”, then press [OK].  
After you have completed all the connections, you must  
find the viewing channel (external input source) on your  
TV.  
2. Language setup screen will appear. Use [K / L] to  
select your language, then press [OK].  
1. After you have made all the necessary connections,  
press [Q (standby/on)] to turn on the unit.  
Please select your  
English  
language for on-screen  
display.  
Español  
2. Turn on your TV.  
Français  
3. Press the button on the TV’s remote control that  
accesses the external input channel. It may be labeled  
“SOURCE”, “AV”, “AUX” or “SELECT” (refer to your  
TV’s user manual). Or press “2” on the TV’s remote  
control, then press channel down button repeatedly  
until you see the Philips splash screen.  
3. Quick start mode setup screen will appear. Use  
[K / L] to select the desired mode, then press [OK].  
4. Auto software update setup screen will appear. Use  
[K / L] to select the desired mode, then press [OK].  
5. Network setup screen will appear. Use [K / L] to  
select the desired mode, then press [OK].  
• If you select “Wired”, refer to “Wired” on page 44  
for further operation.  
• If you select “Wireless”, refer to “Wireless” on page  
46 for further operation.  
This is the correct viewing channel (external input  
source).  
• If the TV is connected by an HDMI cable, it may take  
a while for the Philips splash screen to come up.  
• If a certain amount of time has passed since you  
turned on the unit, welcome screen appears the first  
time you turn on this unit.  
EN - 22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Playable files  
AVCHD  
Media  
DVD-RW/-R  
6. INFORMATION ON  
PLAYBACK  
MP3  
BD-RE/-R  
DVD-RW/-R  
CD-RW/-R  
Windows Media™ Audio  
JPEG  
6.1. Information on Playback  
USB storage device  
Before you start playing back a disc, read the following  
information.  
Readable devices  
Playable files / data  
MP3, WMA, JPEG, picture-in-  
picture commentary, subtitles or  
other extras for BD-ROM ver. 2  
(Profile 2.0 / Profile 1.1)  
Playable Discs and Files  
USB storage device supports  
USB1.1 / USB2.0  
Playable discs  
Logos  
Blu-ray Disc™  
Recommended Specifications  
- BD-video  
- Blu-ray 3D™ Disc  
- Blu-ray 3D™ only Disc  
AVCHD  
This unit cannot play back standalone AVCHD files (*.m2ts,  
*.mts or *.m2t) written to a DVD. The DVD containing  
AVCHD files must have a proper file and folder structure  
meeting AVCHD format specifications.  
Please use AVCHD compliant device / software to burn or  
copy AVCHD files to DVD. (Please refer to user manuals  
of the device / software for more information.)  
- BD-RE* (ver. 2.1)  
(Recorded in BDMV format)  
- BD-R* (ver. 1.1 / 1.2 / 1.3)  
(Recorded in BDMV format)  
(Discs not finalized may not be  
played back.)  
DVD-video  
MP3 / Windows Media™ Audio  
Sampling frequency : 32 kHz, 44.1 kHz or 48 kHz  
DVD-RW  
(finalized video mode discs only)  
Constant bit rate  
: 112 kbps - 320 kbps (MP3),  
48 kbps - 192 kbps (WMA)  
DVD-R  
JPEG  
(finalized video mode discs only)  
Resolution  
Upper limit  
: 2,560 x 1,900 dots  
(sub sampling is 4:4:4)  
5,120 x 3,840 dots  
CD-DA (audio CD)  
CD-RW  
(sub sampling is up to 4:2:2)  
Lower limit  
: 32 x 32 dots  
Maximum file size of : 12MB  
a picture  
CD-R  
Folder / File Number Limitations  
KODAK Picture CD  
DTS-CD  
Blu-ray Disc™, DVD and USB storage device  
999 folders (groups) and 9,999 files.  
-
CD  
255 folders (groups) and 999 tracks / files.  
(*) Due to the intentional progression of the Blu-ray Disc™  
format by its standard setting authority, the company  
cannot guarantee or warrant the playability of future  
extensions of the Blu-ray Disc™ format with this  
product.  
EN - 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Caution / Note for USB Storage Device  
Unplayable Discs and Files  
The following discs will not be played back in this unit.  
C Caution  
CD-ROM  
CD-I (compact disc-interactive)  
VSD (video single disc)  
video CD  
Philips is not responsible if the USB storage device is  
not supported nor is it responsible for damage or loss  
of data from the device.  
DVD-RAM  
DVD-audio  
HD DVD  
Do not try to open or modify the USB storage device.  
SVCD  
unfinalized disc  
BD-RE (ver.1.0)  
Do not touch the terminal surface with your fingers or  
any metals.  
BD-RE (ver.2.1) (Recorded in BDAV format)  
BD-R (ver.1.1 / 1.2 / 1.3) (Recorded in BDAV format)  
Blu-ray Disc™ that contains AVCHD files  
D Note  
This unit supports USB storage device with FAT16 /  
FAT32 file system.  
Blu-ray Disc™ / DVD / CD / USB storage device / SD  
card contains DivX® files  
This unit does not support NTFS file system.  
This unit may not read USB storage devices formatted  
on a computer. If that is the case, please reformat the  
USB storage devices in this unit and try again.  
Blu-ray Disc™ / DVD hybrid disc (played back as a BD-  
video only)  
DVD-RW/-R recorded in non compatible recording  
format  
Please keep the USB storage devices in their cases  
when you are not using them.  
Super Audio CD - Only the sound on the CD layer can  
be heard. The sound on the high-density Super Audio  
CD layer cannot be heard.  
Some USB storage devices may not work with this unit.  
This unit can read SD cards using USB card reader (not  
supplied).  
Playability of dual discs is not guaranteed.  
Readable cards:  
This unit cannot play back the disc contents protected  
by Windows Media™ Digital Rights Management  
(DRM).  
SD Memory Card (8 MB - 2 GB)  
miniSD Card (16 MB - 2 GB)  
microSD Card (256 MB - 2 GB)  
SDHC Memory Card (4 GB - 32 GB)  
miniSDHC Card (4 GB - 8 GB)  
microSDHC Card (4 GB - 16 GB)  
Region Codes  
BD-video  
This unit has been designed to play back  
BD-video with region “A”, DVD-video  
with region “ALL” or “1” for BDP5506/F7  
(USA / Canada) and region “ALL” or “4”  
for BDP5506/F8 (Mexico). You cannot  
play back BD-video or DVD-video that are  
labeled for other regions. Look for the  
symbols on the right on your BD-video or  
DVD-video.  
DVD-video  
If these region symbols do not appear on  
your BD-video or DVD-video, you cannot  
play back the disc in this unit. The letter or  
number inside the globe refers to region  
of the world. A BD-video or DVD-video  
labeled for a specific region can only be  
played back in the unit with the same  
region code.  
For BDP5506/F7  
(USA / Canada)  
For BDP5506/F8  
(Mexico)  
EN - 24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hint for Disc Playback  
6.2. Guide to File List  
The contents of a disc are generally divided into sections or  
folders (groups of titles / files) as shown below.  
Music File List  
BD-video, DVD-video, AVCHD  
e.g.) MP3 mode  
title 1  
chapter 1  
title 2  
chapter 2  
2
3
chapter 2  
chapter 1  
chapter 3  
File List  
Track 1 / 25  
Time 0 : 00 : 12  
1
7
MP3_ Disc  
CD DATA  
4
5
Audio  
MP3_1.mp3  
Audio CD  
track 3  
MP3_2.mp3  
MP3_3.mp3  
MP3_4.mp3  
MP3_5.mp3  
MP3_6.mp3  
Page Up  
track 1  
track 2  
track 4  
track 5  
6
MP3,Windows Media™ Audio, JPEG  
1. Current track (file) number / Total number of  
tracks (files)  
folder (group) 2  
file 4  
folder (group) 1  
file 1  
file 2  
file 3  
file 5  
2. Elapsed playing time of the current track  
3. Playback status  
4. Media type  
5. Image  
6. Group (folder) / File list  
7. Name of disc / USB storage device  
[
Description for Icons  
] : group (folder) icon  
] : music file icon  
Picture File List  
[
- “Folders” refers to the groups of files.  
1
2
- “Tracks” refers to the contents recorded on the audio  
CD.  
Thumbnail  
Track  
Pictures  
- “Files” refers to the contents on a disc which are  
recorded in AVCHD, MP3, Windows Media™ Audio,  
JPEG (including KODAK Picture CD) file format.  
1/50  
Picture CD  
3
4
5
Photo Folder  
Page Up  
D Note  
Unrecognizable characters will be replaced with  
asterisks.  
Page Down  
1. Current file number / Total number of files  
2. Playback status  
3. Media type  
4. Image  
5. Group (folder) / File list (thumbnails)  
EN - 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
How to Navigate through the Track / File List  
Use [K / L] to move the highlight up and down in the  
list.  
7.1. Playing Back a Disc  
To access the files in a group (folder), select the  
desired group (folder), then press [OK].  
1. Insert a disc (refer to “How to Insert a Disc” on page  
26).  
Press [s] or [BACK U] to go back to the  
previous hierarchy.  
• For Blu-ray Disc™ / DVD / audio CD or a disc  
containing only one type of file, playback will start  
automatically. If not, press [B (play)].  
Press [Red] or [Green] to change the page of the  
list.  
Press [Yellow] to go back to the media mode  
screen.  
• Some discs may show a title or a disc menu. In this  
case, refer to “Using the Title / Disc / Pop-up Menu”  
on page 29.  
Press [ (home)] to go back to the home menu.  
• Media filter screen will appear.  
2. Select the type of the file you want to play back, then  
6.3. How to Insert a Disc  
press [OK].  
1. Press [A (open/close)] to open the disc tray.  
2. Place the disc on the disc tray with its label side facing  
up.  
Music  
Photo  
AVCHD  
Align the disc to the  
disc tray guide.  
3. Press [A (open/close)] to close the disc tray.  
For “Music”, track / file list will be displayed. Select a  
group (folder) or track / file you want to play back then  
press [B (play)] or [OK] to start playback.  
• It may take a while to load the disc.  
Navigate through the Track / File List” on page 26.  
For “Photo”, thumbnail screen will appear.  
• Refer to “Picture File List” on page 25 and “How to  
Navigate through the Track / File List” on page 26.  
EN - 26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
To skip to the next track / file :  
Press [T (next)].  
D Note  
Playback will also stop and the home menu will appear  
when you press [ (home)].  
To skip to the previous track / file :  
Press [S (previous)].  
For BD-Java application, the Resume-On-Stop may not  
be available.  
If you press [OK] instead of [B (play)], playback can  
be started from the beginning of the disc even if it was  
in the Resume-On-Stop mode.  
To pause playback :  
Press [F (pause)].  
To return to normal playback :  
Press [B (play)].  
Resume-On-Stop mode remains in effect even after  
power is turned off, but will be canceled once the disc  
is ejected.  
To stop playback :  
With regard to the multi-border BD-RE/-R, additionally  
recorded sections cannot be recognized.  
Press [C (stop)].  
With regard to the multi-border DVD-RW/-R,  
additionally recorded sections may not be recognized.  
Playback will be in Resume-On-Stop mode.  
Resume-On-Stop Mode  
E Tips for JPEG / KODAK Picture CD Playback  
Every press of [s / B] will turn the image by 90  
degrees when an image is displayed.  
Blu-ray Disc™ / DVD / AVCHD :  
When you press [B (play)] next time, the playback  
will start from the point where it has been stopped.  
During playback, press [TOP MENU] to display  
thumbnail screen.  
Audio CD :  
This unit conforms to ver.7.0 of KODAK Picture CD.  
For details of KODAK Picture CD, contact a shop that  
provides developing service for Kodak Inc.  
Playback will start from the point where it is stopped  
next time you press [B (play)]. If you press [OK]  
instead of [B (play)], playback will start from the  
beginning of the track / file instead of resuming from the  
stop point.  
Some unplayable folders or files may be listed due to  
the recording status.  
High-resolution JPEG files take longer to be displayed.  
MP3 / WMA / JPEG / KODAK Picture CD :  
Progressive JPEG files (JPEG files saved in progressive  
format) cannot be played back in this unit.  
Playback will start from the beginning of the current file  
next time you press [B (play)] or [OK].  
EN - 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C Caution  
7.2. Playing Back a Blu-ray 3D™ Disc  
Watching 3D videos may cause headache, dizziness or  
tiredness.  
To avoid such consequences, do not watch 3D videos  
for a long period of time.  
This unit can play back Blu-ray 3D™ discs which contain  
stereoscopic 3D video. In order to view Blu-ray 3D™  
videos, you need to have the following:  
Watching 3D videos is not recommended for the  
following people:  
- 3D capable TV  
- Children from walking age to seven years  
- Pregnant woman  
- 3D compatible HDMI cable  
- 3D glasses  
- Blu-ray 3D™ Disc or Blu-ray 3D™ only Disc  
For more information, refer to “IMPORTANT HEALTH  
AND SAFETY INFORMATION FOR 3D TELEVISIONS”  
on page 60.  
1. Connect 3D capable TV with a 3D compatible HDMI  
cable.  
• Refer to “HDMI Video / Audio Connection” on page 15.  
2. Insert a Blu-ray 3D™ Disc or a Blu-ray 3D™ only Disc.  
D Note  
For more information, refer to the 3D TV’s manual.  
3. Playback may start automatically. If not, press  
When “3D Output” is set to “Auto (XX)” and your TV is  
not 3D capable, playback of Blu-ray 3D™ discs will  
revert to 2D depending on the disc.  
[B (play)].  
Some discs may show a title or a disc menu. In this case,  
refer to “Using the Title / Disc / Pop-up Menu” on page  
29.  
You can turn off 3D output mode by setting “3D  
Output” to “2D”. (Refer to page 39.)  
For some Blu-ray 3D™ only discs, playback in 2D mode  
is not possible.  
To pause playback:  
Press [F (pause)].  
You can check the current output mode (2D or 3D) by  
pressing [INFO] during playback.  
To return to normal playback:  
Press [B (play)].  
If you change “3D Output” setting to “2D” while the  
unit is in the Resume-On-Stop mode of Blu-ray 3D™  
Disc playback, the resume information will be cleared.  
To stop playback:  
Press [C (stop)].  
Playback will be in Resume-On-Stop mode, and the  
home menu will appear.  
Resume-On-Stop mode  
When you press [B (play)] next time, the playback  
will start from the point where it has been stopped.  
EN - 28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
D Note  
7.3. Playing Back Contents on a USB  
Storage Device  
The resume information will be cleared when;  
- [C (stop)] is pressed while in the Resume-On-Stop  
mode.  
- the USB storage device is removed.  
- the unit is switched to standby mode.  
You can play back MP3 / WMA / JPEG files from a USB  
storage device. With the USB storage device, you can also  
enjoy the following functions.  
Do not delete the folders or files in the USB storage  
device with your computer. This unit may not read USB  
storage devices formatted on a computer.  
- Special additional contents for BD-ROM Profile 1 ver.1.1.  
(For more information about the special additional  
contents, refer to the instruction book that came with  
the disc.)  
If a folder or file name includes one of the following  
unrecognizable characters, the folder or file name may  
not be displayed correctly.  
- BD-Live™ function (BD-ROM ver. 2 Profile 2.0). (For  
more information about BD-Live™, refer to page 31.)  
- Unrecognizable characters :  
. , " = + [ ] ; / \ : | ¥  
This unit can read MP3 / WMA / JPEG files in an SD  
card by using USB card reader (not supplied).  
7.4. Using the Title / Disc / Pop-up Menu  
1. Connect a USB storage device to the USB input.  
Some BD-videos, DVD-videos or AVCHD files may contain  
a title menu which describes the contents of the disc, or a  
disc menu which guides you through the available functions  
in the disc.  
2. Press [ (home)].  
3. Use [K / L / s / B] to select “Browse USB”, then  
press [OK].  
With such discs, a title menu or a disc menu may appear  
automatically when you insert the disc. Otherwise, press  
[TOP MENU] or [DISC MENU / POP-UP MENU]  
to call up the menu. Refer to the disc’s manual on how to  
navigate through the menu.  
4. Follow steps 2 to 3 in “Playing Back a Disc” on page 26.  
To remove the USB storage device:  
In stop mode, pull it out slowly.  
C Caution  
D Note  
Do not remove the USB storage device or switch the  
unit to standby mode while the contents of the device  
are being accessed. It may result in malfunction or loss  
of the device data.  
Menus vary among discs. Refer to the information  
accompanying the disc for details.  
[TOP MENU] or [DISC MENU / POP-UP MENU]  
may not work with some discs.  
Philips cannot be held responsible if your USB storage  
device is not supported, nor will Philips accept any  
liability for damage or loss of stored data.  
If a USB card reader is connected, files in an SD card  
which is connected first to the slot of the reader will be  
displayed.  
EN - 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
8.3. Step by Step Playback  
8. SPECIAL PLAYBACK  
8.1. Fast Forward / Fast Reverse  
1. In pause mode, press [T (next)] repeatedly.  
Every time you press [T (next)], playback will  
advance one step at a time.  
1. During playback, press [D (forward)] repeatedly for  
fast forward.  
2. Press [B (play)] or [F (pause)] to return to normal  
playback.  
During playback, press [E (reverse)] repeatedly for  
fast reverse.  
D Note  
Every time you press [D (forward)] or  
[E (reverse)], the playback speed will change.  
Only step by step forward is available.  
2. Press [B (play)] to return to normal playback.  
8.4. Repeat Playback  
D Note  
Available repeat function varies depending on the discs.  
1. During playback, press [REPEAT].  
For Blu-ray Disc™, DVD and AVCHD, speed changes  
in 5 different levels.  
2. Use [K / L] to select the desired repeat mode.  
For audio CD, MP3 and Windows Media™ Audio,  
speed changes in 3 different levels.  
REPEAT MODE  
Chapter Repeat  
AVAILABLE MEDIA  
For audio CD, fast forward / fast reverse search  
between different tracks are not available during  
random playback.  
The current chapter will be  
played back repeatedly.  
Title Repeat  
The current title will be  
played back repeatedly.  
Track Repeat  
For MP3 and Windows Media™ Audio, fast forward /  
fast reverse search between different files are not  
available.  
The current track or file  
will be played back  
repeatedly.  
8.2. Slow Forward Playback  
All Repeat  
1. During playback, press [F (pause)] . Then press  
All tracks in the media will  
be played back repeatedly.  
Group Repeat  
[D (forward)].  
Every time you press [D (forward)], the playback  
The current group (folder)  
will be played back  
repeatedly.  
speed changes in 3 different levels.  
2. Press [B (play)] to return to normal playback.  
Random Repeat  
(Audio CD)  
Repeats the random  
playback.  
D Note  
Only slow forward is available.  
Random Repeat  
(MP3 /  
Windows Media™  
Audio / JPEG)  
Repeats the random  
playback in a folder.  
3. Press [BACK U] to exit.  
EN - 30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
D Note  
8.6. PiP (BONUSVIEW™) Setting  
The repeat setting will be canceled when you stop  
playback.  
When the repeat setting is set for an MP3 or WMA  
folder (file), the repeat setting will be canceled if you  
select other MP3 or WMA folder (file) to play back.  
Some BD-videos have the PiP function which enables you  
to display the secondary video in the primary video.  
PiP  
1/8  
Primary  
video  
8.5. Slide Show  
1. Follow steps 1 to 2 in “Playing Back a Disc” on page 26.  
2. Open the folder which contains the desired JPEG files.  
Secondary  
video  
3. Use [K / L / s / B] to select a desired file to be  
1. During playback, press [BONUSVIEW (PiP)].  
played back, then press [B (play)] or [OK].  
2. Use [K / L] to select the secondary video you want to  
• An image will be played back from the selected file  
and go to the next one in turn every 10 seconds.  
show.  
• The secondary video will be displayed with the  
secondary audio.  
4. Press [C (stop)] to stop playback.  
To return to the first item:  
“Off”.  
Press [TOP MENU].  
3. Press [BACK U] to remove the PiP information.  
To return to the file played last:  
Press [DISC MENU / POP-UP MENU].  
• On how to output the secondary audio, refer to  
“Switching Audio Soundtrack” on page 34 and  
“Blu-ray Disc Audio” on page 39.  
D Note  
During playback, press [TOP MENU] to display  
thumbnail screen.  
8.7. Enjoying BD-Live™ Discs Using the  
Internet  
Large-size JPEG files take a few moments to be  
displayed.  
You can enjoy BD-Live™ which enables you to use  
interactive features when the unit is connected to the  
Internet.  
Examples of BD-Live™ features:  
Online access to additional content such as movie  
trailers, subtitles, BD-Java applications, etc.  
While downloading, special video data may be played  
back.  
- Service and functions differ depending on the  
disc. Follow the instructions given by the disc  
when using the BD-Live™ function.  
- Insert a USB storage device of at least 1GB  
capacity before using BD-Live™ features on a  
Blu-ray Disc™.  
- Do not remove the USB storage device while  
using BD-Live™ features.  
EN - 31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
D Note  
Using [OPTION]  
You must connect the unit to the Internet and set up  
necessary settings in order to use BD-Live™.  
1. During playback, press [OPTION] to display the play  
menu.  
For the network connection, refer to “Connection to  
the Network” on page 20.  
2. Use [K / L] to select “Search”, then press [OK].  
3. Use [K / L] to select “Title” or “Chapter”, then press  
For the network setup, refer to “Network Installation”  
on page 43.  
[OK].  
e.g.) Blu-ray Disc™  
For certain discs, BD-Live™ setting in “Manual Setup”  
may need to be changed. (Refer to page 44.)  
Search  
Title  
001 / 999  
Depending on your connection environment, it may  
take time to connect to the Internet or the Internet  
may not be connected.  
4. Use [K / L / s / B] to select the title / chapter  
number.  
5. Press [OK].  
When BD-Live™ functions are used and the unit is  
connected to the Internet, you may be charged for this  
communication.  
Playback will start from the beginning of the title /  
chapter.  
6. Press [BACK U] to exit.  
Some discs with BD-Live™ function require memory  
when playing back the content. If you cannot play back a  
disc with BD-Live™ function, insert a USB storage  
device (1GB or more) which is formatted on this unit.  
Using [the Number buttons] (Direct Search)  
Chapter Search  
D Note for AACS Online  
During playback of a title, enter the chapter number you  
want to search using [the Number buttons].  
The player or disc IDs may be sent to the content  
provider when playing back a disc with BD-Live™  
function.  
Playback of the chapter will start in a few seconds.  
If you save your viewing history on the server by using  
these IDs, you will be introduced to other similar  
movies.  
D Note  
As for the BD-video, how it performs will be strongly  
determined by the disc, and may not perform as  
described.  
You can save game score histories.  
8.8. Title / Chapter Search  
Using [S (previous)] / [T (next)]  
1. During playback, press [T (next)] to skip the current  
title or chapter and move to the next.  
The title or chapter will move forward one at a time.  
• If there is no chapter in one title, the current title  
may be skipped.  
To go back to the beginning of the current title or  
chapter, press [S (previous)].  
Press [S (previous)] repeatedly to go to the  
previous title or chapter. The title or chapter may  
move backward one at a time.  
EN - 32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
8.9. Track Search  
8.11. Switching Subtitles  
Some video materials may have subtitles in one or more  
languages. For commercially available discs, the supported  
languages can be found on the disc case. Follow the steps  
below to switch the subtitle language during playback.  
1. During playback, press [T (next)] to skip the current  
track or file and move to the next.  
The track / file will move forward one at a time. To go  
back to the beginning of the current track / file, press  
[S (previous)].  
1. During playback, press [SUBTITLE].  
Press it repeatedly to go to the previous track / file.  
The track / file will move backward one at a time.  
2. Use [K / L] to select “Primary”, “Secondary” or  
“Style”, then press [OK].  
“Primary”  
“Secondary”  
“Style”  
: Sets the subtitle for the primary  
video.  
: Sets the subtitle for the secondary  
video.  
8.10. Time Search  
1. During playback, press [OPTION] to display the play  
: Sets style of the subtitle.  
menu.  
3. Use [K / L] to select your desired subtitle or style.  
2. Use [K / L] to select "Search", then press [OK].  
Subtitle Primary  
Secondary  
Style  
1 ENG / 255  
3. Use [K / L] to select "Time", then press [OK].  
Off  
Off  
e.g.) Blu-ray Disc™  
Search  
Time  
00:12:44 / 11:13:14  
• Use [s / B] to switch between current subtitle  
setting and “Off”.  
4. Use [K / L] or [the Number buttons] to enter the  
time count you want to jump to.  
4. Press [BACK U] to exit.  
e.g.) Entering 1 hour 45 minutes and 15 seconds.  
Press  
1. During playback, press [SUBTITLE].  
5. Press [OK].  
2. Use [K / L] to select your desired subtitle.  
Playback will start from the desired time entered.  
Subtitle  
1 ENG / 32  
6. Press [BACK U] to exit.  
• Use [s / B] to switch between current subtitle  
setting and “Off”.  
3. Press [BACK U] to exit.  
D Note  
Some discs will only allow you to change the subtitles from  
the disc menu or pop-up menu. Press [TOP MENU] or  
[DISC MENU / POP-UP MENU] to display the disc  
menu or pop-up menu.  
If the disc has no subtitle language or subtitle style,  
“Not Available” will be displayed on the TV screen.  
During playback of the secondary video, the primary  
subtitle setting is not available except when there is no  
subtitle for the secondary video.  
You can also change the subtitle setting from the play  
menu. Play menu can be called up by pressing  
[OPTION].  
EN - 33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
D Note  
8.12. Switching Audio Soundtrack  
The secondary audio will not be output when the  
secondary video is not displayed or when “Blu-ray Disc  
Audio” is set to “Primary Audio Only”. (For some Blu-  
ray™ discs, secondary audio will be output even when  
secondary video is off.)  
When playing back video material recorded with two or  
more soundtracks (these are often in different audio  
languages or audio formats), you can switch them during  
playback. For Blu-ray Disc™, available audio varies  
depending on “Blu-ray Disc Audio” setting. Refer to page  
39 for more information.  
The sound mode cannot be changed during playback of  
discs not recorded in multiple audio mode.  
Some discs allow changing the audio language setting on  
the disc menu. (Operation varies depending on the  
discs. Refer to the manual accompanying the disc.)  
1. During playback, press [AUDIO].  
[AUDIO] may not work on some discs with multiple  
audio streams or channels (e.g. DVDs that allow  
changing audio setting on the disc menu).  
2. Use [K / L] to select “Primary” or “Secondary”, then  
press [OK].  
“Primary” : Sets the audio for the primary video.  
“Secondary” : Sets the audio for the secondary video.  
If the disc has no audio language, “Not Available” will be  
displayed on the TV screen.  
For DTS-CD (5.1 music disc), selecting audio streams  
or channels is not available.  
3. Use [K / L] to select your desired audio stream  
channel.  
You can also change the audio setting from the play  
menu. Play menu can be called up by pressing  
[OPTION].  
Audio  
Primary  
1 ENG Dolby D Multi-ch / 3  
1 ENG DTS  
Multi-ch / 3  
Secondary  
[Decoding Format] : Dolby D  
8.13. Switching Camera Angles  
• For “Secondary”, use [s / B] to switch between  
current audio setting and “Off”.  
4. Press [BACK U] to exit.  
Some BD-videos and DVD-videos contain scenes which  
have been shot simultaneously from various angles. You can  
change the camera angle when  
screen.  
appears on the TV  
1. During playback, press [AUDIO].  
2. Use [K / L] to select your desired audio stream  
1. During playback, press [ANGLE].  
channel.  
• The selected angle will be displayed on the display  
bar at the top of the TV screen.  
Audio  
1 ENG Dolby D  
Multi-ch / 3  
2. Use [K / L] to select your desired angle.  
[Decoding Format] :Dolby D  
3. Press [BACK U] to exit.  
• For audio CD, you can select following options.  
D Note  
“Stereo”  
: Both right and left channels are  
active (stereo).  
: Only left channel is active.  
: Only right channel is active.  
If “Angle Icon” setting is set to “Off”,  
will not  
appear on the TV screen. (Refer to page 41.)  
“L-ch”  
“R-ch”  
You can also change the angle setting from the play  
menu. Play menu can be called up by pressing  
[OPTION].  
3. Press [BACK U] to exit.  
EN - 34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
8.14. Black Level  
8.16. Virtual Surround  
You can adjust the black level setting to make the black  
parts of the pictures as bright as you prefer. You can select  
“On” or “Off”.  
You can enjoy stereophonic virtual space through your  
existing 2 channel stereo system.  
1. During playback, press [OPTION] to display the play  
1. During playback, press [OPTION] to display the play  
menu.  
menu.  
2. Use [K / L] to select “Virtual Surround”, then press  
2. Use [K / L] to select “Black Level”, then press [OK].  
[OK].  
3. Use [K / L] to select your desired setting.  
3. Use [K / L] to select your desired setting.  
e.g.) Blu-ray Disc™  
e.g.) Blu-ray Disc™  
Black Level  
On  
Virtual Surround  
Off  
“On” : Makes the dark parts blacker with additional  
contrast and brightness.  
“Off” : Shows the original picture as recorded.  
“On” : Activates surround effect.  
“Off” : Deactivates surround effect.  
4. Press [BACK U] to exit.  
4. Press [BACK U] to exit.  
D Note  
D Note  
Set the virtual surround setting to “Off” or lower the  
volume if the sound is distorted.  
The setting will remain the same even if the unit is  
switched to standby mode.  
For the virtual surround, audio signal will always be  
2-channel LPCM.  
“Black Level” is not effective under the following  
conditions.  
- When the picture is output from HDMI OUT jack.  
8.15. Noise Reduction  
Reduces the noise of the playback picture.  
1. During playback, press [OPTION] to display the play  
menu.  
2. Use [K / L] to select “Noise Reduction”, then press  
[OK].  
3. Use [K / L] to select your desired setting.  
e.g.) Blu-ray Disc™  
Noise Reduction  
Off  
“On” : Activates noise reduction.  
“Off” : Deactivates noise reduction.  
4. Press [BACK U] to exit.  
D Note  
The setting will remain the same even if the unit is  
switched to standby mode.  
EN - 35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Philips Wireless MediaConnect Help  
8.17. Philips Wireless MediaConnect  
To read the Philips Wireless MediaConnect Help, right  
click the program icon in the notification tray of the PC and  
select Help.  
With this feature, you can enjoy your TV as a PC monitor  
wirelessly using your home network. Make sure you  
download the Philips Wireless MediaConnect software and  
install it on your PC before you perform the steps below.  
Specifics  
You can project high definition (HD) or standard definition  
(SD) video, depending on the processing power of your PC.  
For smooth playback of HD video, please use a hardware  
accelerated video player on your computer.  
Install Philips Wireless MediaConnect  
1. Press [ (home)] on the Blu-ray Disc™ Player  
remote.  
A hardware accelerated video player uses the graphics  
adapter of your PC to render HD video rather than the  
processor. This frees up the processor for Philips Wireless  
MediaConnect video encoding. The content protection on  
most DVD or Blu-ray Disc™ movies might restrict  
watching the movie on TV when the disc is playing on a PC.  
The TV shows PC media files with a small delay. Philips  
Wireless MediaConnect is only available for PC.  
2. Use [K / L / s / B] to select “Setup”, then press  
[OK].  
3. Use [K / L] to select “Network Setup”, then press  
[OK].  
4. Use [K / L] to select “MediaConnect”, then press  
[OK].  
• Write down the 12-digit code displayed on the  
screen. You will need this to download  
MediaConnect software.  
PC and network requirements  
Supported OS  
5. Start your Internet browser on your PC and open the  
Philips Wireless MediaConnect download page at  
you can check the necessary PC system requirements.  
Windows XP, Windows Vista, Windows 7 (PC only)  
Minimum requirements  
6. Enter the 12-digit code you wrote at step 4 and  
download the MediaConnect software.  
Intel Core 2 Duo 1.8GHz  
512MB RAM  
7. Click the “Download now” button to download the  
free Philips Wireless MediaConnect software.  
IEEE 802.11n (PC and wireless router)  
Recommended requirements  
8. Once downloaded, run the file “Philips Wireless  
MediaConnect_setup.exe”. Follow the instructions on  
your PC to complete software installation.  
Intel Core 2 Duo 2.1GHz  
1GB RAM  
Using Philips Wireless MediaConnect  
1. Launch Philips Wireless MediaConnect on your PC  
first.  
• Select “Start projecting” with right click on the  
the system tray.  
in  
2. Press [ (home)] on the Blu-ray Disc™ Player  
remote.  
3. Use [K / L / s / B] to select “MediaConnect”, then  
press [OK].  
• The startup screen for Philips Wireless  
MediaConnect will be displayed and the unit searches  
for an available PC that is running Philips Wireless  
MediaConnect software.  
Once connected, the Philips Wireless MediaConnect  
software will encode and stream the screen of your PC as a  
video along with audio.  
Depending on your computer and network configuration,  
there will be a delay between your PC screen and the TV  
but the audio-video will always be in sync.  
EN - 36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
9. NETWORK SERVICES  
10. PANDORA OPERATIONS  
With this unit, You can instantly listen to personalized  
radio stations streamed over the Internet from Pandora.  
To learn more about Pandora, please visit  
Please follow the instructions below before using network  
features.  
1. Connect this unit to the Internet.  
• Refer to “Connection to the Network” on page 20.  
2. Set up the necessary network connection settings.  
• Refer to “Network Installation” on page 43.  
3. Press [Net-TV].  
10.1. Activating Pandora  
In order to listen to Internet radio streamed from Pandora  
via the Internet, you must create a Pandora account and  
activate this unit.  
• Net TV screen will appear.  
1. Follow steps 1 to 3 in “Before Using Network Services”  
on page 37.  
• For the first time only, "Philips Terms of Use  
Internet Enabled Product" screen will appear. After  
confirming the content, press [OK].  
2. Use [K / L / s / B] to select “PANDORA”, then  
press [OK].  
4. Press [ (home)] to exit.  
3. Use [K / L] to select “CREATE NEW  
ACCOUNT”, then press [OK].  
Guide to Net TV menu screen  
4. Use [K / L] to select “No, I am new to Pandora.”,  
then press [OK].  
5. Note the activation code and website address displayed  
on the TV screen.  
All  
Video  
Music  
1
Game  
6. On your PC, visit the website address noted at step 5.  
News  
Lifestyle  
7. Follow directions on the website to create your  
account.  
8. On this unit, select “CONTINUE” and press [OK]  
2
to complete activation.  
Country  
USA  
Terms of Use  
4
3
10.2. Adding Pandora User Accounts  
1. Sorting items :  
You can add multiple Pandora user accounts on this unit.  
1. Follow steps 1 to 3 in “Activating Pandora” on page 37.  
Categorizes genre of each services  
2. Network Service icons :  
2. Use [K / L] to select “Yes, I have a Pandora  
account”, then press [OK].  
Displays service icons  
3. Enter your e-mail address, then press [OK] while  
3. Country :  
“OK” is selected.  
Selects what country you live  
4. Enter a password, then press [OK] while “OK” is  
4. Terms of Use :  
selected.  
5. Use [K / L] to select “SIGN IN”, then press [OK].  
Displays a clause of net service  
• Your account is added to the user list and player  
screen appears on the TV screen.  
9.2. Information on Network Services  
D Note  
Pandora is available only in the United States.  
For detailed information on 3rd party Internet services,  
please visit the service providers website:  
You can add up to 5 accounts. After creating 5  
accounts, “CREATE NEW ACCOUNT” is not  
displayed.  
Netflix  
If you forget your password, please enter your Pandora  
account's e-mail address and select “Password  
Recovery”, then press [OK]. After a while, an e-mail  
of password reset will be sent to the e-mail address.  
VUDU  
:
EN - 37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
10.3. Creating a New Station  
10.4. Guide to the Player Screen  
By entering your favorite artists or songs, Pandora selects  
music and creates a new station for you on the basis of the  
entered information.  
On the player screen, you can set various options to the  
currently playing song.  
1 2 3 4  
1. On the player screen, press [Blue] to display station  
American Oldies Radio  
list.  
ABC  
2. Press [Yellow] to call up the “Tool Menu”.  
XXXXX  
XXXXX  
3. Use [K / L] to select “Create a new station”, then  
4:52  
0:00  
press [OK].  
4. Enter a name of your favorite artist or song, then press  
[OK] while “OK” is selected.  
• Search result will appear on the right side of the TV  
screen.  
Station List  
• If the selection screen of result type appears, use  
[K / L] to select the desired type, then press [OK].  
1.  
2.  
3.  
: Give thumbs up to the currently  
playing song. Pandora will play songs  
similar to the song.  
5. Use [K / L] to select the desired station, then press  
[OK] to start the playback.  
: Give thumbs down to the currently  
playing song. Pandora will skip and will  
not play the song.  
Button  
[F (pause)]  
Action  
Pause the playback.  
Resume the playback, press  
[B (play)].  
: Bookmarks the currently playing song.  
You can view your bookmarked songs  
list by accessing Pandora website and  
log into your account.  
[C (stop)]  
Stop the playback and the station list  
will appear.  
[T (next)]  
Skips to the next song.  
D Note  
4.  
: Tells Pandora that you do not like the  
currently playing song. Pandora will  
not play the song for about a month.  
On the “Tool Menu”, you can delete or rename the  
currently selected station.  
EN - 38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
11. LIST OF SETTINGS  
In the setup menu, you can customize various kinds of settings as you prefer.  
Refer to the following instructions to navigate through the setup menu.  
1. Press [ (home)] to access the home menu.  
2. Use [K / L / s / B] to select “Setup”, then press [OK].  
3. Use [K / L] to select the desired setting, then press [OK].  
4. Use [K / L] to move the highlight up and down in the list.  
5. To make a selection or to access options of an item, select the desired item, then press [OK].  
• To go back to the previous screen, press [BACK U].  
6. Press [ (home)] to exit.  
Refer to the following table for the types of settings you can customize.  
The item highlighted in gray is the default setting.  
Category  
Menus / Options  
Video Setup  
3D Output  
TV Display  
Auto (XX)  
3D  
2D  
4:3 Normal  
4:3 Crop  
16:9 Widescreen  
16:9 Squeeze  
Auto  
HDMI Video  
480p  
720p  
1080i  
1080p  
1080p/24  
Auto  
Off  
Auto  
Video  
HDMI Deep Color  
De-interlacing Mode  
Night Mode  
Audio Setup  
Auto  
On  
Off  
HDMI Audio  
Bitstream  
LPCM  
Off  
Digital Audio  
Bitstream  
LPCM  
PCM Downsampling  
Blu-ray Disc Audio  
Network Installation  
On  
Off  
Mix Audio Output  
Primary Audio Only  
Start  
Network Setup  
Connection Test  
View Network Settings  
View Wireless Settings  
Netflix ESN  
MediaConnect  
Deactivation  
Netflix  
FILM FRESH  
BLOCKBUSTER  
VUDU  
EN - 39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Category  
EasyLink Setup  
Menus / Options  
EasyLink  
On  
Off  
One Touch Play  
One Touch Standby  
Menu Language  
On  
Off  
On  
Off  
Preference Setup  
Auto (XXXX)  
English  
Español  
Français  
Original  
Bulgarian  
Chinese  
Czech  
Danish  
Dutch  
English  
Finnish  
French  
German  
Greek  
Hungarian  
Icelandic  
Irish  
Audio  
Italian  
Japanese  
Korean  
Norwegian  
Polish  
Portuguese  
Romanian  
Russian  
Slovak  
Spanish  
Swedish  
Turkish  
Other  
Subtitle  
Off  
Bulgarian  
Chinese  
Czech  
Danish  
Dutch  
English  
Finnish  
French  
German  
Greek  
Hungarian  
Icelandic  
Irish  
Italian  
Japanese  
Korean  
Norwegian  
Polish  
Portuguese  
Romanian  
Russian  
Slovak  
Spanish  
Swedish  
Turkish  
Other  
EN - 40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Category  
Preference Setup  
Menus / Options  
Disc Menu  
Bulgarian  
Chinese  
Czech  
Danish  
Dutch  
Italian  
Japanese  
Korean  
Norwegian  
Polish  
English  
Finnish  
French  
German  
Greek  
Hungarian  
Icelandic  
Irish  
Portuguese  
Romanian  
Russian  
Slovak  
Spanish  
Swedish  
Turkish  
Other  
Parental Control  
Off  
8 [Adult]  
7 [NC-17]  
6 [R]  
4 [PG-13]  
3 [PG]  
2 [G]  
5 [PGR]  
1 [Kid Safe]  
Change Password  
Screen Saver  
On  
Off  
Angle Icon  
On  
Off  
Display Panel  
Auto  
Bright  
Dimmer  
Disc  
Network  
USB  
On  
Advanced Setup  
Software Update  
Automatically check for latest  
software  
Off  
Quick Start Mode*  
On  
Off  
Version Info  
Restore default settings  
Reset Settings  
Format USB  
(Unit) Erase Saved BD-ROM Data  
(USB) Erase Saved BD-ROM Data  
Reset Network Settings  
* When “Quick Start Mode” is set to “On”, power consumption during standby mode will increase.  
EN - 41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
12.2. HDMI Video  
12. SETUPS  
(home)  
A
“Setup”  
A
“Video Setup”  
A
“HDMI Video”  
12.1. TV Display  
Set the resolution of the video signal being output from the  
HDMI OUT jack.  
(home)  
A
“Setup”  
A
“Video Setup”  
A
“TV Display”  
You can select the desired “HDMI Video” among the  
settings listed below:  
Use this feature to adjust the aspect ratio of the video  
source which is different from your TV’s ratio to fit your  
TV monitor without distorting the picture. Descriptions of  
each setting are as follows:  
“Auto”,“480p”,“720p”,“1080i”,“1080p”,“1080p/24”  
Actual Output Resolution :  
Video  
Your TV  
Option  
Description  
source  
Setting in  
the “HDMI  
Video”  
Source  
4:3 Normal  
To enjoy 16:9  
picture on 4:3  
monitor:  
16:9 picture is  
scaled down until  
both sides of the  
picture fits the 4:3  
TV.  
480i/60  
720p/60  
1080i/60  
720p/24 1080p/24  
480p  
720p  
480p/60  
720p/60  
480p/60  
720p/60  
480p/60  
720p/60  
480p/60  
720p/60  
480p/60  
720p/60  
1080i  
1080p  
1080i/60  
1080p/60  
1080p/60  
1080i/60  
1080i/60 1080i/60 1080i/60  
1080p/60 1080p/60 1080p/60 1080p/60  
1080p/60 1080p/60 1080p/60 1080p/24  
1080p/24  
4:3 Crop  
To enjoy 16:9  
picture on 4:3  
monitor:  
Both sides of the  
picture are  
trimmed to fit the  
4:3 TV without  
distorting the  
aspect ratio of the  
picture.  
The highest resolution supported by your display device will  
be in effect automatically.  
4:3  
Auto  
Composite video output (VIDEO OUT) jack can only  
output 480i/60.  
16:9  
For AVCHD, outputting the video in 24 frames per  
second (1080p/24) is not available.  
D Note  
You can also change the resolution of the video signal  
being output from the HDMI OUT jack by pressing  
[HDMI] repeatedly.  
16:9 Widescreen  
To enjoy 16:9  
picture on 16:9  
monitor:  
Select this setting  
when you want to  
enjoy 16:9 picture  
on the 16:9 TV.  
Pressing [HDMI] does not work when HDMI cable is  
not connected, or when no video signal is being output  
from the HDMI OUT jack.  
Pressing [HDMI] does not work during the playback  
of a BD-video.  
16:9 Squeeze  
To enjoy 4:3  
picture on 16:9  
monitor:  
Use this setting to  
display 4:3 picture  
on the 16:9 TV  
without distorting  
the aspect ratio of  
the picture.  
The selected resolution must also be supported by  
your display device.  
16:9  
Even if “HDMI Video” is set to “1080p/24”, for a Blu-  
ray Disc™ that is not recorded in 1080p/24 or for  
DVD, the video resolution supported by the disc and  
the display device will be output instead of 1080p/24.  
4:3  
Refer also to your TV’s manual.  
EN - 42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
When the HDMI OUT jack is outputting the video in  
1080p/24, picture will not be output from the VIDEO  
OUT jack.  
12.3. Network Installation  
“Network  
Installation”  
When connected to an HDCP incompatible display  
device, the picture will not be displayed properly.  
(home)  
A
“Setup”  
A
“Network Setup”  
A
Set up network connection settings in order to use  
BD-Live™, Netflix / Film Fresh / Blockbuster / VUDU /  
Pandora or network update function.  
The audio signals from the HDMI OUT jack (including  
the sampling frequency, the number of channels and bit  
length) may be limited by the device that is connected.  
Among the display device(s) that support HDMI, some  
do not support audio output (for example, projectors).  
While connected to a device such as a projector, audio  
will not be output from the HDMI OUT jack.  
Connection Test  
After you enable a network connection or change the  
network settings, always perform the connection test to  
check if the connection is correctly made.  
When this unit’s HDMI OUT jack is connected to a  
DVI-D compatible display device(s) (HDCP compatible)  
with an HDMI-DVI converter cable, the signals are  
output in digital RGB.  
1. Use [K / L / s / B] to select “Setup” in the home  
menu, then press [OK].  
2. Use [K / L] to select “Network Setup”, then press  
When you make a selection, the TV monitor  
temporarily goes blank and then comes back again. If it  
does not come back, press [HDMI] repeatedly to  
change the resolution or touch and hold [B (play)]  
on the front panel for 5 seconds to change the setting  
back to its default.  
[OK].  
3. Use [K / L] to select “Network Installation”, then  
press [OK].  
4. Use [K / L] to select “Connection Test”, then press  
[OK].  
• Connection test will start automatically and the test  
result will appear right after the connection test  
finishes.  
When playing back a Frame Sequential 3D Disc, video  
resolution of output picture will depend on contents on  
the disc. (“HDMI Video” setting is not applicable for  
Frame Sequential 3D Discs.)  
- “Connecting...” : The test is in progress.  
- “Pass” : Connection test is successfully completed.  
Copyright protection system  
- “Failed” : Connection test failed. Check the  
connection settings.  
To play back the digital video images of a BD-video or  
DVD-video via an HDMI connection, it is necessary that  
both the player and the display device (or an AV  
5. Press [OK] to go back to the setup menu, or press  
[
(home)] to exit.  
receiver / amplifier) support a copyright protection  
system called HDCP (high-bandwidth digital content  
protection system). HDCP is copy protection technology  
that comprises data encryption and authentication of the  
connected AV device. This unit supports HDCP. Please  
read the operating instructions of your display device (or  
an AV receiver / amplifier) for more information.  
EN - 43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
D Note  
Manual Setup  
If the connection test passes, you are ready to use  
BD-Live™, Netflix / Film Fresh / Blockbuster / VUDU  
In following cases, select “Manual Setup” to set each setting  
as necessary.  
/
Pandora or network update function, using the Internet  
without making any additional settings.  
- When connection test failed with the setting of  
“Auto Setup”.  
If the connection test fails, you may need to check your  
router settings and make sure the physical connection  
is secure. If you need the MAC address of this unit to  
complete your router settings you can view it on the  
“View Network Settings” / “View Wireless Settings”  
screen (refer to page 48).  
- When instructed by your Internet service provider to  
make specific settings in accordance with your  
network environment.  
1. Follow steps 1 to 3 in “Auto Setup” on page 44.  
2. Use [K / L] to select “Manual Setup”, then press  
[OK].  
When connecting this unit directly to a modem for the  
first time or connecting it to a modem which was  
previously connected to any other network device (e.g.  
a router, PC, etc.), you may have to power cycle the  
modem to reset the settings on the modem.  
3. Use [K / L] to select “IP Address”, then press [OK].  
4. “IP Address” setting screen will appear. Enter IP  
address with cursor buttons and number buttons.  
IP Address  
Wired  
Please input the IP Address.  
Select “Wired” if you made a wired connection and set the  
setting to “Auto Setup” or “Manual Setup”, in accordance  
with your network environment.  
0
0
0
0
.
.
.
Cancel  
Clear  
Done  
Auto Setup  
Select “Auto Setup” to set the network setting  
automatically.  
• Enter the IP address after checking the specifications  
of your router.  
1. Follow steps 1 to 3 in “Connection Test” on page 43.  
2. Use [K / L] to select “Start”, then press [OK].  
3. Use [K / L] to select “Wired”, then press [OK].  
4. Use [K / L] to select “Auto Setup”, then press [OK].  
• If the IP address is unknown, check the IP address of  
other devices. (e.g. PC connected via LAN cable) and  
assign a different number from those of other  
devices.  
5. Use [K / L / s / B] to select “Done”, then press  
• The unit will start the connection test automatically  
and the test result will appear right after the  
connection test finishes.  
[OK].  
5. Select “Finish” to activate the network settings and set  
the network connection automatically.  
EN - 44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
6. Select “Subnet Mask”, “Default Gateway”, “Primary  
DNS” and “Secondary DNS” in turn, and enter each  
address number with cursor buttons and number  
buttons, then press [OK].  
[K / L / s / B] :Move the highlight.  
[the Number buttons] :Enter numbers or letters.  
[OK] :Enter the highlighted number /  
letter.  
• Enter the DNS addresses provided by your Internet  
provider.  
*[Red] :Set the entered number or  
letter.  
[Green] :Cancel the network setting.  
*[Blue] :Clear the entered number or  
letter.  
[Yellow] :Switch between abc, ABC and  
@!?.  
• If the DNS address is unknown, check the DNS  
address of other devices (e.g. PC connected via LAN  
cable) and assign the same DNS address.  
Please enter your  
xxx. xxx. xxx. xxx  
xxx. xxx. xxx. xxx  
IP Address  
Subnet Mask  
network settings.  
* These buttons can be used in other network settings.  
11. Press [Red] to go to the “Proxy Port” setting screen.  
Default Gateway  
xxx. xxx. xxx. xxx  
Enter proxy port number with number buttons.  
Primary DNS  
xxx. xxx. xxx. xxx  
xxx. xxx. xxx. xxx  
Secondary DNS  
Proxy Port  
Continue  
Cancel  
Please input the Proxy Port.  
7. Use [K / L / s / B] to select “Done”, then press  
xxxxxx  
[OK].  
8. Use [K / L / s / B] to select “Continue”, then press  
Cancel  
Clear  
Done  
[OK].  
9. Use [K / L] to select “Yes” or “No” for proxy server,  
12. Use [K / L / s / B] to select “Done”, then press  
then press [OK].  
[OK].  
• If you use proxy server, select “Yes” to go to the  
next step.  
13. Connection speed setting screen will appear. Use  
[K / L] to select the desired setting, then press [OK].  
(The default setting is “Auto”.)  
• If you do not use proxy server, select “No” to go to  
step 13.  
14. BD-Live™ setting screen will appear. Use [K / L] to  
select the desired setting, then press [OK].  
(The default setting is “Allow”.)  
10. “Proxy Address” setting screen will appear. Enter  
proxy address with cursor buttons, number buttons  
and color key.  
“Allow”:  
Proxy Address  
Internet access is permitted for all BD-Live™ contents.  
Please input the Proxy Address with keypad or software keyboard.  
“Limited Allow”:  
Internet access is permitted only for BD-Live™  
contents which have content owner certificates.  
Internet access without the certificates is prohibited.  
“Prohibit”:  
a/A/@  
Done  
Cancel  
Clear  
Internet access is prohibited for all BD-Live™ contents.  
15. Connection test confirmation screen will appear. Select  
“Yes” to start the connection test and the test result  
will appear right after the connection test finishes.  
16. Press [OK] to go back to the setup menu, or press  
[
(home)] to exit.  
EN - 45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
D Note for “IP Address”, “Subnet Mask”,  
“Default Gateway”, “Primary DNS” and  
“Secondary DNS”  
5. “Access Point Setting (Auto Scan)” screen will appear.  
Enter the WEP / WPA key of the selected Wi-Fi  
network using cursor buttons, number buttons and  
color key, then press [Red].  
The range of input numbers is between 0 and 255.  
• If you do not know the WEP / WPA key for your  
Wi-Fi network, ask your ISP or the person who set  
up your Wi-Fi Network.  
If you enter a number larger than 255, the number will  
automatically be reset to 255.  
When you enter a wrong number, select “Clear” to  
clear. (The number will be reset back to “0”.)  
Access Point Setting (Auto Scan)  
If you want to enter a 1 or 2-digit number in one cell,  
Please input the WEP/WPA key with keypad or software keyboard.  
press [B] to move on to the next cell.  
XXXXXXXXXX  
D Note for “Proxy Address” and “Proxy Port”  
The range of input numbers for the port number is  
between 0 and 65535. (If you enter a number larger  
than 65535, it will be regarded as 65535.)  
Done  
Cancel  
Clear  
a/A/@  
For proxy port, certain ports might be closed, blocked  
or unusable depending on your network environment.  
6. Use [K / L] to select “Continue”, then press [OK].  
Choose a connection speed in accordance with your  
network environment.  
Please confirm the  
setting.  
SSID  
Access 1  
When the settings are changed, the network  
Security  
WPA-PSK(AES)  
connection may be disabled depending on the device.  
WEP/WPA Key XXXXXXXXXX  
Wireless  
Continue  
If you connect this unit to the network wirelessly, select  
“Wireless” and set up necessary settings.  
Rescan  
Please make a note of your Wi-Fi network name (SSID) and  
7. Use [K / L] to select “Auto Setup” or “Manual Setup”,  
then press [OK].  
Auto Scan  
• If you select “Auto Setup”, follow step 5 in “Auto  
Setup” on page 44.  
Search for Wi-Fi networks automatically and select the Wi-  
Fi network name (SSID) from the list.  
• If you select “Manual Setup”, follow steps 3 to 12 and  
14 to 16 in “Manual Setup” on page 44.  
1. Follow steps 1 to 2 in “Auto Setup” on page 44.  
2. Use [K / L] to select “Wireless”, then press [OK].  
3. Use [K / L] to select “Auto Scan”, then press [OK].  
D Note  
The internal wireless LAN supports following  
specifications  
• This unit will start searching for Wi-Fi networks  
automatically.  
4. The result of Wi-Fi network searching will be displayed.  
Use [K / L] to select the appropriate Wi-Fi network  
name (SSID), then press [OK].  
- Wi-Fi standards  
- Frequency spectrum : 2.4 GHz  
- Security protocol : WEP / WPA / WPA2  
: IEEE 802.11 b/g/n  
• If you select an SSID without “ ”, please go to step  
6.  
Please select the  
access point.  
Access 1  
Access 2  
Access 3  
Access 4  
Access 5  
Access 6  
Access 7  
Rescan  
Cancel  
EN - 46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Manual Entry  
Easy Connect  
Set up the connection to the Wi-Fi network manually by  
entering the Wi-Fi network name (SSID).  
You can set up the Wi-Fi connection quickly.  
(“Easy Connect” is available only when your router  
supports it. For details, please refer to the user manual of  
your Wi-Fi router.)  
1. Follow steps 1 to 2 in “Auto Scan” on page 46.  
2. Use [K / L] to select “Manual Entry”, then press  
[OK].  
Push Button Method  
3. “Access Point Setting (Manual Entry)” screen will  
appear.  
Please confirm your Wi-Fi router has a PBC button.  
1. Follow steps 1 to 2 in “Auto Scan” on page 46.  
Enter the SSID using cursor buttons, number buttons  
and color key, then press [Red].  
2. Use [K / L] to select “Easy Connect”, then press  
[OK].  
4. Security mode selection screen will appear. Select the  
3. Use [K / L] to select “Push Button Method”, then  
press [OK]. And push the PBC (Push Button  
Configuration) on your Wi-Fi router.  
security mode of the entered SSID, then press [OK].  
• If you select “None”, please go to step 6.  
• The unit will start the connection test automatically  
and the test result will appear right after the  
connection test finishes.  
Please select the  
security mode.  
None  
WEP  
WPA-PSK(TKIP)  
WPA-PSK(AES)  
Please push the PBC(push button  
configuration) on the wireless router  
and select ‘Push Button Method’  
button on screen.  
WPA2-PSK(TKIP)  
WPA2-PSK(AES)  
Push Button Method  
Cancel  
Please input the PIN number into  
the wireless router and select ‘PIN  
Code Method’ button on screen.  
5. “Access Point Setting (Manual Entry)” screen will  
appear.  
65729403  
Cancel  
PIN Code Method  
Enter the WEP / WPA key of the Wi-Fi network using  
cursor buttons, number buttons and color key, then  
press [Red].  
4. Select “Finish” to complete the settings.  
• If you do not know the WEP / WPA key for your  
Wi-Fi network, ask your ISP or the person who set  
up your Wi-Fi Network.  
PIN Code Method  
1. Follow steps 1 to 2 in “Auto Scan” on page 46.  
2. Use [K / L] to select “Easy Connect”, then press  
6. Use [K / L] to select “Continue”, then press [OK].  
[OK].  
3. Set up your Wi-Fi router with PIN code shown on the  
TV screen.  
then press [OK].  
• If you select “Auto Setup”, follow step 5 in “Auto  
Setup” on page 44.  
• For details about setting method of your Wi-Fi  
router, please refer to the user manual of the router.  
• If you select “Manual Setup”, follow steps 3 to 12 and  
14 to 16 in “Manual Setup” on page 44.  
4. Use [K / L] to select “PIN Code Method”, then press  
[OK].  
5. The unit will start the connection test automatically and  
the test result will appear right after the connection  
test finishes.  
6. Select “Finish” to complete the settings.  
EN - 47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
View Network Settings / View Wireless Settings  
System Information  
You can check the current status of network settings or  
Wi-Fi settings.  
Get & Set Menu Language  
The unit recognizes the OSD language set of the TV and  
automatically sets the same language as the player menu  
language (OSD menu language) for this unit. Refer to the  
“Menu Language” on page 40 for available languages.  
1. Follow steps 1 to 2 in “Connection Test” on page 43.  
2. Use [K / L] to select “View Network Settings” or  
“View Wireless Settings”, then press [OK].  
• The current network settings or Wi-Fi settings will  
be displayed.  
This feature is available only when “Auto (XXXX)” is  
selected in the “Menu Language” in the setup menu.  
3. Press [ (home)] to exit.  
12.5. Parental Control  
Netflix ESN  
You can view the ESN number which is a serial number  
used by Netflix to identify a device. Netflix customer  
service might ask you for this number during  
troubleshooting.  
“Preference  
Setup”  
“Parental  
Control”  
(home)  
A
“Setup”  
A
A
Some BD-videos or DVD-videos feature parental lock  
levels. Playback will stop if the ratings exceed the levels you  
set, it will require you to enter a password before the disc  
will play back. This feature prevents your children from  
viewing inappropriate material.  
1. Follow steps 1 to 2 in “Connection Test” on page 43.  
2. Use [K / L] to select “Netflix ESN”, then press [OK].  
3. Press [ (home)] to exit.  
1. Use [K / L / s / B] to select “Setup” in the home  
menu, then press [OK].  
12.4. EasyLink Setup  
2. Use [K / L] to select “Preference Setup”, then press  
[OK].  
(home)  
A
“Setup”  
A
“EasyLink Setup”  
3. Use [K / L] to select “Parental Control”, then press  
[OK].  
This unit supports Philips EasyLink, which enables your TV  
(limited to Philips brand EasyLink TV) to act in conjunction  
with this unit, or vice versa. Compliant TV must be  
connected to the HDMI OUT jack.  
When “EasyLink” setting is set to “On”, functions listed  
below will be available.  
One Touch Play  
When the operations with following buttons of the remote  
control of this unit are performed, the TV will automatically  
be turned on and switched to the appropriate input  
channel. (“One Touch Play” can be turned off by setting it  
to “Off”.)  
Buttons for one touch play:  
- [B (play)], [S (previous)], [T (next)],  
[the Number buttons], [ (home)], or  
[Net-TV]  
-
[TOP MENU], or [DISC MENU / POP-UP MENU]  
(when a disc is inserted in the unit)  
One Touch Standby  
When you press and hold [Q (standby/on)] for 2  
seconds, it turns off the power of the TV first and then it  
turns off the power on this unit. When the connected  
EasyLink compatible display device is turned off first, it then  
turn off the power on this unit. (“One Touch Standby” can  
be turned off by setting it to “Off”.)  
EN - 48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
For the first time only :  
Change Password  
Use [the Number buttons] to enter any 4-digit  
number (except for 4737). That number will be used as  
the password. Record your password, in case you  
forget it.  
1. Follow steps 1 to 2 in “Parental Control” on page 48.  
2. Use [K / L] to select “Change Password”, then press  
[OK].  
3. Use [the Number buttons] to enter your 4-digit  
• If you forget the password, enter [4], [7], [3], [7].  
The password will be cleared and rating level will be  
set to “Off”.  
password.  
4. Use [the Number buttons] to enter a new 4-digit  
password.  
• While you input the password, select “Clear” to  
clear the number, then re-enter the password.  
5. Use [the Number buttons] to retype the same new  
4-digit password.  
Once a password is set :  
6. Use [K / L / s / B] to select “Confirm”, then press  
[OK].  
Use [the Number buttons] to enter your 4-digit  
password.  
7. Press [ (home)] to exit.  
4. Use [K / L] to select your desired parental lock level,  
then press [OK].  
12.6. Software Update  
5. Press [ (home)] to exit.  
RATING EXPLANATIONS  
“Advanced  
Setup”  
“Software  
Update”  
(home)  
A
“Setup”  
A
A
Off  
Parental control is inactive; all discs  
can play back.  
Philips continuously tries to improve its products and we  
strongly recommend that you update the software when  
updates are available. New software can be downloaded  
from our website at www.philips.com/support using the  
model number of your Blu-ray Disc™ Player (e.g.  
BDP5506) to find information.  
8 [Adult]  
DVD software of any grades  
(adult / general / children) can be  
played back.  
7 [NC-17]  
6 [R]  
No one under 17.  
Restricted; under 17.  
5 [PGR]  
4 [PG-13]  
3 [PG]  
Parental Guidance Recommended.  
Unsuitable for children under 13.  
Parental Guidance suggested.  
General Audience.  
Disc / USB Update  
You can update the software by using a disc or USB storage  
device.  
2 [G]  
1. Use [K / L / s / B] to select “Setup” in the home  
1 [Kid Safe]  
Suitable for children.  
menu, then press [OK].  
To cancel parental lock temporarily :  
2. Use [K / L] to select “Advanced Setup”, then press  
[OK].  
Some discs allow you to cancel parental lock temporarily.  
With these discs, the message below will appear when you  
try to play them back.  
3. Use [K / L] to select “Software Update”, then press  
[OK].  
4. Use [K / L] to select “Disc” or “USB”, then press  
“Enter current password.”  
[OK].  
Follow the instruction which appears on the TV screen to  
cancel parental lock. After entering the password, “Parental  
Control” appears. Select desired parental lock level, then  
press [OK].  
5. Use [s / B] to select “Yes”, then press [OK].  
6. Insert the disc or USB storage device for software  
update.  
7. After loading the disc or USB storage device,  
confirmation message will appear. Select “Yes” and  
press [OK] to start updating.  
• It may take a while to complete the update.  
8. After the update finishes, this unit will restart. Remove  
the disc or USB storage device from the unit.  
C Caution  
Please do not disconnect the AC power cord or USB  
storage device while executing the “Disc” or “USB”  
update.  
EN - 49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
D Note  
12.7. Restore Default Settings  
Please visit www.philips.com/support to download  
the latest software version. Please read the software  
update Read-me file carefully before performing an  
update using a disc or USB storage device.  
“Advanced  
Setup”  
“Restore default  
settings”  
(home)  
A
“Setup”  
A
A
Menus to reset player settings, format USB storage device,  
local storage and clear network settings.  
All settings will remain the same even if you update the  
software version.  
1. Use [K / L / s / B] to select “Setup” in the home  
The version of Netflix will also be updated if newer  
version of Netflix is available when updating the  
software.  
menu, then press [OK].  
2. Use [K / L] to select “Advanced Setup”, then press  
[OK].  
3. Use [K / L] to select “Restore default settings”, then  
Network Update  
press [OK].  
You can update the software by connecting the unit to the  
Internet.  
4. Use [K / L] to select the desired setting, then press  
[OK].  
1. Follow steps 1 to 3 in “Disc / USB Update” on page 49.  
2. Use [K / L] to select “Network”, then press [OK].  
3. Use [s / B] to select “Yes”, then press [OK].  
“Reset Settings” :  
All the settings except for the “Parental Control” and  
“Network Installation” setting will be reset to default.  
• This unit will then start checking for the latest  
software version.  
“Format USB” (Available only when a USB  
storage device is connected):  
4. Confirmation message will appear. Select “Yes”, then  
press [OK].  
Initialize the USB storage device.  
• The unit will start downloading the latest software  
version.  
“(Unit) Erase Saved BD-ROM Data”:  
5. When the download completes, confirmation message  
Clears the data saved for the BD-ROM contents, such  
as BD-ROM game scores, on this player.  
will appear. Press [OK].  
• The unit will start updating the software version.  
• It may take a while to complete the update.  
“(USB) Erase Saved BD-ROM Data” (Available  
only when a USB storage device is connected):  
6. After updating finishes, this unit will restart  
automatically.  
Clears the supplemental data for the BD-ROM  
playback, such as subtitle data, from the USB storage  
device.  
C Caution  
“Reset Network Settings”:  
Please do not unplug the AC power cord or LAN cable  
while executing the “Network” update.  
Reset the network setting to the default.  
5. Use [s / B] to select “Yes”, then press [OK].  
D Note  
• Confirmation message will appear. Press [OK] to  
complete the setting.  
In order to update the software via the Internet, you  
must connect the unit to the Internet and set up  
necessary settings.  
6. Press [ (home)] to exit.  
For the network connection, refer to “Connection to  
the Network” on page 20.  
C Caution  
Do not remove the USB storage device while executing  
the “Format USB” or “(USB) Erase Saved BD-ROM  
Data”. It will damage the USB storage device.  
For the network setup, refer to “Network Installation”  
on page 43.  
All settings will remain the same even if you update the  
software version.  
D Note  
“Format USB” and “(USB) Erase Saved BD-ROM Data”  
The version of Netflix will also be updated if newer  
version of Netflix is available when updating the  
software.  
are not available when a Blu-ray Disc™ is in the unit.  
EN - 50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
13. TROUBLESHOOTING  
Problem  
Tip  
No reaction to the remote control. Connect the product to the power outlet.  
Point the remote control at the product.  
Insert the batteries with the correct polarity.  
Insert new batteries in the remote control.  
No video signal on the display  
device.  
Turn on the TV.  
Set the TV to the correct external input.  
Select the correct video resolution using [HDMI] .  
Touch and hold [B (play)] on the front panel for 5 seconds to change the setting  
back to its default.  
No audio / video signal on the  
display device via HDMI cable.  
If the unit is connected to the unauthorized display device with an HDMI cable, the  
audio / video signal may not be output.  
Perform an HDMI cable hotplug, wherein you disconnect the HDMI cable from the  
TV and this unit and then reconnect it to both the devices while they are powered  
on.  
Ensure that your HDMI cable is certified.  
No high-definition video signal on  
the TV screen.  
Does the disc contain high-definition video? High-definition video is not available  
when the disc does not contain it.  
Does the TV support high-definition video? High-definition video is not available  
when the TV does not support it.  
No 3D video on the TV screen.  
Check if your TV is 3D capable.  
Use a 3D compatible HDMI cable to connect the 3D capable TV.  
Set “3D Output” to “Auto (XX)”. (Refer to page 39.)  
Wear 3D glasses and make sure they are switched on and in sync with your TV.  
Check the battery levels of your glasses.  
Refer to your 3D TV's user manual for more information.  
Assign the audio input of the TV to the corresponding video input.  
Ensure that the TV's speakers are turned on in the TV menu.  
Ensure that the TV's speakers are not muted.  
No audio signal from the  
loudspeakers of the TV screen.  
No audio signal from the  
Turn on the audio system.  
loudspeakers of the audio system.  
Set the audio system to the correct external audio input.  
Increase the volume level of the audio system.  
Cannot play back a disc.  
Make sure that the product supports the disc.  
Check the region code of the disc. This unit supports following region codes.  
- Blu-ray Disc™ :A”  
- DVD  
:ALL” or “1” for BDP5506/F7 (USA / Canada)  
“ALL” or “4” for BDP5506/F8 (Mexico)  
For DVD-RW/-R, make sure that the disc is finalized.  
Clean the disc.  
USB storage device cannot be read. The format of the device is not accepted by this unit or the device is not compatible.  
Cannot play back JPEG files from a Make sure that the disc was recorded in the UDF, ISO9660 or JOLIET format.  
disc.  
Cannot play back MP3 files from a Make sure that the disc was recorded in the UDF, ISO9660 or JOLIET format.  
disc.  
Make sure that the bit rate of the MP3 files is between 112 and 320 kbps.  
Make sure that the sample rate of the MP3 files is 32 kHz, 44.1 kHz or 48 kHz.  
Make sure that the sample rate of the Windows Media™ Audio files is  
44.1 kHz or 48 kHz.  
Cannot play back Windows  
Media™ Audio files from a disc.  
EN - 51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Problem  
Tip  
The operation is not possible.  
in the upper right hand corner  
of the TV screen.  
Buttons do not work or the unit  
stops responding.  
To completely reset the unit, touch and hold [Q (standby/on)] on the front panel  
for 10 seconds to shut down the unit or unplug the AC cord from the AC outlet for  
5-10 seconds.  
Cannot find a JPEG file.  
Make sure that the selected group (folder) does not contain more than 9,999 files  
for Blu-ray Disc™ / DVD / USB storage device, and 999 files for CD.  
Make sure that the file extension is .jpg, .JPG, .jpeg or .JPEG.  
Cannot find an MP3 and  
Windows Media™ Audio file.  
Make sure that the selected folder does not contain more than 9,999 files for Blu-ray  
Disc™ / DVD / USB storage device, and 999 files for CD.  
Make sure that the file extension is .mp3 or .MP3 for MP3, and .wma or .WMA for  
Windows Media™ Audio.  
Cannot play back AVCHD file.  
This unit cannot play back standalone AVCHD files (*.m2ts, *.mts or *.m2t) written  
to a DVD. The DVD containing AVCHD files must have a proper file and folder  
structure meeting AVCHD format specifications.  
Please use AVCHD compliant device / software to burn or copy AVCHD files to  
DVD. (Please refer to user manuals of the device / software for more information.)  
Error message appears when I select Make sure that the unit is connected to the Philips brand EasyLink TV and the  
“Auto” in the “Menu Language”.  
“EasyLink” is set to “On”.  
This error message may appear when your TV’s OSD language is not supported by  
this unit.  
Cannot connect to the network.  
Check if the network connection is properly made.  
Turn on the modem or router.  
Check the network settings.  
Check if the router and/or modem is correctly connected.  
Check the BD-Live™ setting in “Manual Setup” on page 44.  
When connecting directly to a modem via a LAN cable, you might need to power  
cycle the modem to reset settings on the modem.  
EN - 52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem  
Tip  
Cannot use the Wi-Fi connection.  
Once you have activated the Wi-Fi connection please wait for 30 seconds for the  
connection to be established after turning on the unit, before trying to access  
network features such as BD-Live™, Netflix, Film Fresh, Blockbuster, VUDU or  
Pandora.  
Cannot get into the PC's screen  
after “MediaConnect” is selected.  
The startup screen (Philips logo with spinning circle) keep displaying until the unit  
found the PC that is running Philips Wireless MediaConnect.  
Make sure if the network connection is connected properly.  
Check if your PC runs Philips Wireless MediaConnect.  
Make sure this unit and PC are connected on the same network.  
For smooth operation of your PC while Philips MediaConnect is running you need a  
mainstream dual core processor from Intel or AMD.  
I have a 1.8GHz CPU but  
MediaConnect does not work on  
my PC.  
Intel: Core2Duo or Core i3/5/7 @ 1.8GHz or higher.  
AMD: Athlon II X2, Turion II Dual-Core or Phenom X2 @ 2GHz or higher.  
Check the content of your Internet service contract to see if your Internet Service  
Provider prevents multiple terminals connecting at the same time.  
Cannot connect to the network  
while my PC is connected to the  
network.  
The capacity of the USB storage  
device decreased.  
MPEG-2 video and audio on the  
USB storage device cannot be  
played back.  
Data may be written to the USB storage device when a BD-video that supports the  
virtual package is used and a USB storage device is connected.  
MPEG-2 is noncompliant on this unit.  
The contents of the USB storage  
device cannot be read.  
The USB storage device is not compatible or the contents on the USB storage device  
may be damaged.  
Turn off and then turn the unit on again.  
Cannot use the BD-Live™ function Insert a USB storage device with enough capacity (1GB or more).  
or download of data does not  
perform properly.  
Check if a USB storage device is correctly inserted.  
Cannot play back BD-video (BD-  
ROM Profile 2.0).  
Insert a USB storage device (1GB or more) which is formatted on this unit. Some  
discs with BD-Live™ function require memory when playing back the content.  
Do not remove the USB storage device during playback.  
EN - 53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13.1. Downloading an Electronic Copy  
To obtain an electronic copy of this manual :  
1. Point your browser to www.philips.com/support  
2. Choose your country of location.  
3. Enter the model number or a keyword in the “Find your product” field. Alternatively, you can browse the catalog.  
4. Click the description or model.  
5. Under Product support, click “User manuals”  
.
13.2. Contact Us  
If you cannot resolve your problem, refer to the FAQ for this Blu-ray Disc™ Player at www.philips.com/support  
If the problem remains unresolved, contact the Customer Support Center in your country.  
D Note  
Do not attempt to repair the Blu-ray Disc™ Player yourself. This may cause severe injury, irreparable damage to your  
Blu-ray Disc™ Player or void your warranty.  
Please have your Blu-ray Disc™ Player model and serial number available before contacting us.  
These numbers are available on the cabinet, as well as on the packaging.  
EN - 54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Digital Audio  
14. GLOSSARY  
An indirect representation of sound by numbers. During  
(44,100 times a second for CD audio) by an analog-to-  
digital converter, generating a stream of numbers. On  
playback, a digital-to-analog converter generates an analog  
signal based on these numbers. See also “Sampling  
Frequency” and “Analog Audio”.  
Analog Audio  
An electrical signal that directly represents sound.  
Compare this to digital audio which can be an electrical  
signal, but is an indirect representation of sound. See also  
“Digital Audio”.  
DNS Server  
Aspect Ratio  
A server which translates Internet domain names into IP  
addresses.  
The width of a TV screen relative to its height.  
Conventional TVs are 4:3 (in other words, the TV screen is  
almost square); widescreen models are 16:9 (the TV screen  
is almost twice as wide as its height).  
Dolby Digital  
The system to compress digital sound developed by Dolby  
Laboratories. It offers you sound of stereo (2ch) or multi-  
channel audio.  
AVCHD  
AVCHD is a new format for high definition video  
camcorders which can record and play high-resolution HD  
images.  
Dolby Digital Plus  
Dolby Digital Plus is the next generation digital audio  
compression technology developed as an extension to  
Dolby Digital. Blu-ray Disc™ supports 7.1 multi-channel  
surround sound output.  
BD-Live™  
BD-Live™ is a BD-video (BD-ROM version 2 Profile 2.0)  
which contains new functions (e.g. Internet connection), in  
addition to the BONUSVIEW™ function.  
Dolby TrueHD  
Blockbuster  
Dolby TrueHD is a lossless coding technology developed  
for next generation optical discs. Blu-ray Disc™ supports  
7.1 multi-channel surround sound output.  
Blockbuster is online service which you can rent or  
purchase movies and TV episodes streamed over the  
Internet.  
Blockbuster is available only in the United States.  
DTS® (Digital Theater System)  
DTS® is a multi channel surround sound system. You can  
enjoy movie dynamic and realistic sound like movie theater.  
DTS surround sound technologies were developed by DTS,  
Inc.  
Blu-ray Disc™  
Blu-ray Disc™ is a next generation optical video disc which  
is capable of storing much more data than a conventional  
DVD. The large capacity makes it possible to benefit from  
the features such as high-definition videos, multi-channel  
surround sounds, interactive menus and so on.  
DTS-HD®  
DTS-HD® is a lossless coding technology developed as an  
extension of the original DTS Coherent Acoustics format.  
Blu-ray Disc™ supports 7.1 multi-channel surround sound  
output.  
Chapter  
Just as a book is split up into several chapters, a title on a  
BD-video or DVD-video is usually divided into chapters.  
See also “Title”.  
Film Fresh  
Film Fresh is online service which you can rent or purchase  
movies and TV episodes streamed over the Internet.  
Film Fresh is available only in the United States.  
EN - 55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Gateway  
Pandora  
IP address of the electronic devices (such as router) which  
provide Internet access.  
Pandora is the personalized Internet radio service.  
You can instantly listen to personalized radio stations  
streamed over the Internet from Pandora.  
Pandora is available only in the United States.  
HDMI (High-Definition Multimedia Interface)  
A digital interface between audio and video source. It can  
transmit component video, audio, and control signal with  
one cable connection.  
PCM (Pulse Code Modulation)  
The most common system of encoding digital audio, found  
on CD and DAT. Excellent quality, but requires a lot of  
data compared to formats such as Dolby Digital and MPEG  
audio. For compatibility with digital audio recorders (CD,  
MD and DAT) and AV amplifiers with digital inputs, this  
unit can convert Dolby Digital, DTS, and MPEG audio to  
PCM. See also “Digital Audio”.  
Hub  
A device used for connecting multiple device to the  
network.  
IP Address  
Proxy Server  
A set of numbers which are assigned to devices  
participating in a computer network.  
Proxy server is a server which acts as an intermediary  
between a workstation user and the Internet to ensure  
security.  
JPEG (Joint Photographic Experts Group)  
JPEG is a method of compressing still picture files. You can  
copy JPEG files on BD-RE/-R, DVD-RW/-R, CD-RW/-R, or  
USB storage device from a computer and play back the files  
on this unit.  
Region Code  
Regions associate discs and players with particular areas of  
the world. This unit will only play back discs that have  
compatible region codes. You can find the region code of  
your unit by looking on the rear panel. Some discs are  
compatible with more than one region (or all regions).  
LAN (Local Area Network)  
A group of computer networks covering a small area like a  
company, school or home.  
Router  
A networking device which distinguishes the IP address  
assigned to each device and routing and forwarding  
information in the computer network.  
Local Storage  
A storage area of sub contents for playing virtual packages  
on BD-video.  
Sampling Frequency  
MP3 (MPEG audio layer 3)  
The rate which sound is measured by a specified interval to  
turn into digital audio data. The numbers of sampling in one  
second defines as sampling frequency. The higher the rate,  
the better the sound quality.  
MP3 is a method of compressing files. You can copy MP3  
files on BD-RE/-R, DVD-RW/-R, CD-RW/-R, or USB  
storage device from the computer and play back the files on  
this unit.  
Subnet Mask  
Netflix  
A mask which is used to determine what subnet an IP  
address belongs to.  
Netflix is online movie rental service, offering online  
streaming to customers in the United States.  
Title  
A collection of chapters on BD-video or DVD-video. See  
also “Chapter”.  
EN - 56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Track  
Audio CD uses tracks to divide up the content of a disc.  
The BD-video or DVD-video equivalent is called a chapter.  
See also “Chapter”.  
Virtual Package  
The function which copies data to other media (local  
storage) from the Internet and plays secondary video,  
secondary audio and subtitles at the same time. The  
method of the playback varies depending on discs.  
VUDU  
VUDU is a leading HD on-demand video service which  
utilizes the Internet connection to deliver the highest  
quality on-demand video and Internet applications.  
Windows Media™ Audio  
Windows Media™ Audio is the audio compressing  
technology developed by Microsoft. You can copy  
Windows Media™ Audio files on BD-RE/-R, DVD-RW/-R,  
CD-RW/-R, or USB storage device from a computer and  
play them back on this unit.  
x.v.Color  
“x.v.Color” is a promotion name given to the products that  
have the capability to realize a wide color space based on  
the xvYCC specifications and is a trademark of Sony  
Corporation.  
EN - 57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15. LANGUAGE CODE LIST  
Language  
A-B  
Code  
Language  
Code  
Language  
Code  
Language  
Code  
6565  
6557  
6558  
6561  
5165  
6567  
6569  
6568  
French [FRE]  
5264 Macedonian  
5271 Malagasy  
5358 Malay  
5957 Siswat  
Abkhazian  
4748 Frisian  
5953 Slovak [SLO]  
5965 Slovenian  
5958 Somali  
Afar  
4747 Galician  
Afrikaans  
Albanian  
Amharic  
4752 Georgian  
6563 German [GER]  
4759 Greek [GRE]  
4764 Greenlandic  
5471 Guarani  
5747 Malayalam  
5051 Maltese  
5158 Maori  
5966 Spanish [SPA]  
5955 Sundanese  
5964 Swahili  
Arabic  
5758 Marathi  
5360 Moldavian  
5367 Mongolian  
5447 Nauru  
Armenian  
Assamese  
Aymara  
5961 Swedish [SWE]  
4765 Gujarati  
5960  
T
4771 Hausa  
6047 Tagalog  
6051 Tajik  
6658  
6653  
6647  
6666  
6651  
6654  
4861  
6655  
6661  
6665  
6664  
6657  
6669  
Azerbaijani  
Bashkir  
4772 Hebrew  
4847 Hindi  
5569 Nepali  
5455 Norwegian [NOR] 6061 Tamil  
Basque  
5167 Hungarian [HUN]  
5467  
O-R  
Tatar  
6149 Telugu  
6164 Thai  
Bengali;Bangla  
Bhutani  
4860  
I-K  
Occitan  
5565 Oriya  
5072 Icelandic [ICE]  
4854 Indonesian  
4855 Interlingua  
4864 Interlingue  
4853 Inupiak  
Bihari  
5560 Oromo (Afan)  
5547 Panjabi  
6159 Tibetan  
6247 Tigrinya  
6265 Tonga  
5247 Tsonga  
Bislama  
Breton  
5551 Pashto;Pushto  
5557 Persian  
Bulgarian [BUL]  
Burmese  
Byelorussian  
C-E  
5971 Irish [GLE]  
4851 Italian [ITA]  
Japanese [JPN]  
5347 Polish [POL]  
5566 Portuguese [POR]  
5647 Quechua  
6258 Turkish [TUR]  
6266 Turkmen  
6367 Twi  
Cambodian  
Catalan  
5759 Javanese  
4947 Kannada  
7254 Kashmiri  
4961 Kazakh  
5669 Rhaeto-Romance  
5760 Romanian [RUM]  
5765 Russian [RUS]  
6459  
U-Z  
6461 Ukrainian  
6467 Urdu  
Uzbek  
6757  
6764  
6772  
6855  
6861  
4971  
6961  
7054  
5655  
7161  
7267  
Chinese [CHI]  
Corsican  
Croatian  
Czech [CZE]  
Danish [DAN]  
Dutch [DUT]  
English [ENG]  
Esperanto  
Estonian  
5757  
S
5464 Kinyarwanda  
4965 Kirghiz  
6469 Samoan  
5771 Sangho  
6460 Sanskrit  
5761 Scots Gaelic  
5767 Serbian  
6559 Vietnamese  
6553 Volapuk  
6547 Welsh  
5350 Wolof  
6564 Xhosa  
6554 Yiddish  
6566 Yoruba  
6660 Zulu  
6560  
5047 Kirundi  
6058 Korean [KOR]  
5160 Kurdish  
5161  
L-N  
Serbo-Croatian  
5861 Sesotho  
5166 Laothian  
Latin  
F-H  
5847 Setswana  
5868 Shona  
Faroese  
5261 Latvian;Lettish  
5256 Lingala  
5255 Lithuanian  
Fiji  
5860 Sindhi  
6550  
Finnish [FIN]  
5866 Singhalese  
6555  
D Note  
If you choose a language that has a 3-letter-language code (written in bracket), the code will be displayed every time  
you change the subtitle language setting on page 33 or audio language setting on page 34. If you choose any other  
languages, “---” will be displayed instead.  
EN - 58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
16. SPECIFICATIONS  
General  
Signal System  
NTSC Color  
Power requirements  
Power consumption  
Dimensions (width x height x depth)  
Weight  
120 V AC, 60 Hz  
20 W (standby: 0.5 W)  
17.2 x 1.6 x 8.5 inches (435 x 38.9 x 213.85 mm)  
4.4 lbs. (2.0 kg)  
Operating temperature  
Operating humidity  
41°F (5°C) to 104°F (40°C)  
Less than 80 % (no condensation)  
Terminals  
USB input  
TYPE A  
USB 2.0  
Bus power current: MAX. 500mA  
Audio output (Analog)  
RCA jack x 2  
Video output  
L/R: 2 Vrms (output impedance: more than 1k)  
1 Vp-p (75)  
RCA jack x 1  
Audio output (Digital)  
RCA jack x 1  
500 mVp-p (75)  
HDMI output  
HDMI jack x 1  
LAN terminal  
Video: 480p, 720p, 1080i, 1080p, 1080p24/Audio  
10BASE-T / 100BASE-TX  
Wireless LAN (Internal)  
IEEE 802.11 b/g/n  
D Note  
The specifications and design of this product are subject to change without notice.  
EN - 59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
17. IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D TELEVISIONS  
Read the following information before viewing 3D television images.  
CAUTION NOTICE:  
1. Ambient fluorescent lighting may cause a flickering effect and direct sunlight  
may adversely affect the operation of your 3D glasses.  
2. DO NOT place your television near open stairwells, balconies or other objects as  
viewing in 3D images may cause disorientation for some viewers resulting in falls,  
tripping or walking into objects.  
3. If you experience (1) altered vision; (2) lightheadedness; (3) dizziness; (4) involuntary  
movements such as eye or muscle twitching; (5) confusion; (6) nausea; (7) loss of  
awareness; (8) convulsions; (9) cramps; and/or (10) disorientation, immediately stop  
watching 3D images and consult your doctor.  
4. Parents should regularly monitor their children concerning the above symptoms  
as children and teenagers may be more likely to experience these symptoms more  
frequently than adults. Watching 3D television is not recommended for children  
under the age of 6 as their visual system is not yet fully developed.  
5. Prolonged viewing of 3D images might cause discomfort, dizziness, eye strain,  
headaches or disorientation.  
WARNING NOTICE:  
1. Some viewers may experience an epileptic seizure or stroke when exposed to  
certain flashing images or lights contained in certain television pictures or video  
games. If you or any of your family has a history of epilepsy or stroke, please  
consult your doctor before viewing 3D images.  
2. DO NOT watch 3D television if you are pregnant, elderly, sleep-deprived, suffering  
from serious medical conditions, in poor physical condition or under the influence  
of alcohol.  
3. Sitting too close to the screen for an extended period of time may damage your  
eyesight.The ideal distance should be at least three times the height of theTV screen  
and at the viewer's eyes level.  
4. Wearing the 3D glasses for any reason other than viewing 3D television (as general  
spectacles, sunglasses, protective goggles, etc.) may physically harm you or weaken  
your eyesight.  
5. If you experience any discomfort while viewing 3D images, stop and do not  
immediately engage in any potentially hazardous activity such as driving a car  
until your symptoms have disappeared. If your symptoms persist, do not resume  
watching 3D images without consulting your doctor.  
EN - 60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
18. ONE (1) YEAR LIMITED WARRANTY  
WARRANTY COVERAGE:  
This warranty obligation is limited to the terms set forth  
below.  
a part that has been modified without written permission,  
or (d) if any serial number has been removed or defaced,  
or (e) product, accessories or consumables sold “AS IS”  
without warranty of any kind by including refurbished Philips  
product sold “AS IS” by some retailers.  
WHO IS COVERED:  
This product is warranted to the original purchaser or the per-  
son receiving the product as a gift against defects in materials  
and workmanship as based on the date of original purchase  
(“Warranty Period”) from an Authorized Dealer. The original  
sales receipt showing the product name and the purchase date  
from an authorized retailer is considered such proof.  
This Limited Warranty does not cover:  
Shipping charges to return defective product.  
Labor charges for installation or setup of the product, adjust-  
ment of customer controls on the product, and installation or  
repair of antenna/signal source systems outside of the product.  
Product repair and/or part replacement because of improper  
installation or maintenance, connections to improper voltage  
supply, power line surge, lightning damage, retained images or  
screen markings resulting from viewing fixed stationary con-  
tent for extended periods, product cosmetic appearance items  
due to normal wear and tear, unauthorized repair or other  
cause not within the control of the company.  
WHAT IS COVERED:  
This warranty covers new products if a defect in material  
or workmanship occurs and a valid claim is received within  
the Warranty Period. At its option, the company will either (1)  
repair the product at no charge, using new or refurbished  
replacement parts, or (2) exchange the product with a product  
that is new or which has been manufactured from new, or ser-  
viceable used parts and is at least functionally equivalent or  
most comparable to the original product in current inventory,  
or (3) refund the original purchase price of the product.  
The Company warrants replacement products or parts provided  
under this warranty against defects in materials and workmanship  
from the date of the replacement or repair for ninety (90) days  
or for the remaining portion of the original product’s warranty,  
whichever provides longer coverage for you. When a product or  
part is exchanged, any replacement item becomes your property  
and the replaced item becomes the company’s property. When a  
refund is given, your product becomes the company’s property.  
Note: Any product sold and identified as refurbished or  
renewed carries a ninety (90) day limited warranty.  
Damage or claims for products not being available for use, or  
for lost data or lost software.  
Damage from mishandled shipments or transit accidents when  
returning product.  
A product that requires modification or adaptation to enable  
it to operate in any country other than the country for which  
it was designed, manufactured, approved and/or authorized, or  
repair of products damaged by these modifications.  
A product used for commercial or institutional purposes  
(including but not limited to rental purposes).  
Product lost in shipment and no signature verification receipt  
can be provided.  
Failure to operate per Owner’s Manual.  
TO OBTAIN ASSISTANCE IN THE U.S.A., CANADA,  
PUERTO RICO, OR U.S. VIRGIN ISLANDS...  
Contact Customer Care Center at:  
Replacement product can only be sent if all warranty  
requirements are met. Failure to follow all  
requirements can result in delay.  
1-866-309-0866  
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS  
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-  
SUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN-  
TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF  
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD-  
UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE  
LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR  
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT  
IS LIMITED IN DURATION TO THE DURATION OF THIS  
WARRANTY.  
WHAT IS NOT COVERED - EXCLUSIONS AND  
LIMITATIONS:  
This Limited Warranty applies only to the new products that  
can be identified by the trademark, trade name, or logo affixed  
to it. This Limited Warranty does not apply to any non-Philips  
hardware product or any software, even if packaged or sold  
with the product. Non-Philips manufacturers, suppliers, or  
publishers may provide a separate warranty for their own  
products packaged with the bundled product.  
The Company is not liable for any damage to or loss of any  
programs, data, or other information stored on any media  
contained within the product, or any non-Philips product or  
part not covered by this warranty. Recovery or reinstallation  
of programs, data or other information is not covered under  
this Limited Warranty.  
Some states do not allow the exclusions or limitation of incidental  
or consequential damages, or allow limitations on how long  
an implied warranty lasts, so the above limitations or exclusions  
may not apply to you.  
This warranty does not apply (a) to damage caused by accident,  
abuse, misuse, neglect, misapplication, or non-Philips product,  
(b) to damage caused by service performed by anyone other  
than an Authorized Service Location, (c) to a product or  
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.  
P&F USA, Inc.  
PO Box 430 Daleville, IN 47334-0430  
EN - 61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
must cause it, when started running for such interactive use in the most ordinary  
way, to print or display an announcement including an appropriate copyright  
notice and a notice that there is no warranty (or else, saying that you provide a  
warranty) and that users may redistribute the program under these conditions,  
and telling the user how to view a copy of this License. (Exception: if the Pro-  
gram itself is interactive but does not normally print such an announcement, your  
work based on the Program is not required to print an announcement.)  
These requirements apply to the modied work as a whole. If identiable sections  
of that work are not derived from the Program, and can be reasonably considered  
independent and separate works in themselves, then this License, and its terms, do  
not apply to those sections when you distribute them as separate works. But when  
you distribute the same sections as part of a whole which is a work based on the  
Program, the distribution of the whole must be on the terms of this License, whose  
permissions for other licensees extend to the entire whole, and thus to each and  
every part regardless of who wrote it.  
Thus, it is not the intent of this section to claim rights or contest your rights to  
work written entirely by you; rather, the intent is to exercise the right to control the  
distribution of derivative or collective works based on the Program.  
In addition, mere aggregation of another work not based on the Program with the  
Program (or with a work based on the Program) on a volume of a storage or dis-  
tribution medium does not bring the other work under the scope of this License.  
3.You may copy and distribute the Program (or a work based on it, under Section  
2) in object code or executable form under the terms of Sections 1 and 2 above  
provided that you also do one of the following:  
LICENSE  
This section describes software license used for this product.  
This product uses some open source software:  
GPL software: linux, module-init-tools, mount, nettools, sash, Realtek WiFi driver  
LGPL software: directfb, glibc, Qt, live555  
BSD:WPA Supplicant  
MIT: expat, lua, lua-xmlreader, lua-slncrypto, libxml2  
MIT/X: cURL  
XML-RPC FOR C/C++ license: xmlrpc  
gSOAP Public License: gSOAP  
FreeType, LibJPEG, Open SSL, Vera Fonts  
GPL  
GNU General Public License (GPL)  
Version 2, June 1991  
Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth  
Floor, Boston, MA 02110-1301, USA  
Everyone is permitted to copy and distribute verbatim copies of this license docu-  
ment, but changing it is not allowed.  
Preamble  
The licenses for most software are designed to take away your freedom to share  
and change it. By contrast, the GNU General Public License is intended to guaran-  
tee your freedom to share and change free software--to make sure the software  
is free for all its users.This General Public License applies to most of the Free Soft-  
ware Foundation's software and to any other program whose authors commit to  
using it. (Some other Free Software Foundation software is covered by the GNU  
Lesser General Public License instead.)You can apply it to your programs, too.  
When we speak of free software, we are referring to freedom, not price. Our  
General Public Licenses are designed to make sure that you have the freedom to  
distribute copies of free software (and charge for this service if you wish), that you  
receive source code or can get it if you want it, that you can change the software  
or use pieces of it in new free programs; and that you know you can do these  
things.  
To protect your rights, we need to make restrictions that forbid anyone to deny  
you these rights or to ask you to surrender the rights.These restrictions translate  
to certain responsibilities for you if you distribute copies of the software, or if you  
modify it.  
For example, if you distribute copies of such a program, whether gratis or for a  
fee, you must give the recipients all the rights that you have.You must make sure  
that they, too, receive or can get the source code.And you must show them these  
terms so they know their rights.  
a) Accompany it with the complete corresponding machine-readable source code,  
which must be distributed under the terms of Sections 1 and 2 above on a  
medium customarily used for software interchange; or,  
b) Accompany it with a written offer, valid for at least three years, to give any third  
party, for a charge no more than your cost of physically performing source  
distribution, a complete machine-readable copy of the corresponding source  
code, to be distributed under the terms of Sections 1 and 2 above on a medium  
customarily used for software interchange; or,  
c) Accompany it with the information you received as to the offer to distribute  
corresponding source code. (This alternative is allowed only for noncommercial  
distribution and only if you received the program in object code or executable  
form with such an offer, in accord with Subsection b above.)  
The source code for a work means the preferred form of the work for making  
modications to it. For an executable work, complete source code means all the  
source code for all modules it contains, plus any associated interface denition  
les, plus the scripts used to control compilation and installation of the executable.  
However, as a special exception, the source code distributed need not include any-  
thing that is normally distributed (in either source or binary form) with the major  
components (compiler, kernel, and so on) of the operating system on which the  
executable runs, unless that component itself accompanies the executable.  
If distribution of executable or object code is made by offering access to copy from  
a designated place, then offering equivalent access to copy the source code from  
the same place counts as distribution of the source code, even though third parties  
are not compelled to copy the source along with the object code.  
We protect your rights with two steps: (1) copyright the software, and (2) offer  
you this license which gives you legal permission to copy, distribute and/or modify  
the software.  
Also, for each author's protection and ours, we want to make certain that every-  
one understands that there is no warranty for this free software. If the software is  
modied by someone else and passed on, we want its recipients to know that what  
they have is not the original, so that any problems introduced by others will not  
reect on the original authors' reputations.  
Finally, any free program is threatened constantly by software patents.We wish to  
avoid the danger that redistributors of a free program will individually obtain patent  
licenses, in effect making the program proprietary. To prevent this, we have made it  
clear that any patent must be licensed for everyone's free use or not licensed at all.  
The precise terms and conditions for copying, distribution and modication follow.  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICA-  
TION  
0.This License applies to any program or other work which contains a notice  
placed by the copyright holder saying it may be distributed under the terms of  
this General Public License.The "Program", below, refers to any such program  
or work, and a "work based on the Program" means either the Program or any  
derivative work under copyright law: that is to say, a work containing the Program  
or a portion of it, either verbatim or with modications and/or translated into  
another language. (Hereinafter, translation is included without limitation in the  
term "modication".) Each licensee is addressed as "you".  
Activities other than copying, distribution and modication are not covered by this  
License; they are outside its scope.The act of running the Program is not restricted,  
and the output from the Program is covered only if its contents constitute a work  
based on the Program (independent of having been made by running the Program).  
Whether that is true depends on what the Program does.  
1.You may copy and distribute verbatim copies of the Program's source code as  
you receive it, in any medium, provided that you conspicuously and appropriately  
publish on each copy an appropriate copyright notice and disclaimer of warranty;  
keep intact all the notices that refer to this License and to the absence of any  
warranty; and give any other recipients of the Program a copy of this License  
along with the Program.  
You may charge a fee for the physical act of transferring a copy, and you may at  
your option offer warranty protection in exchange for a fee.  
2.You may modify your copy or copies of the Program or any portion of it, thus  
forming a work based on the Program, and copy and distribute such modica-  
tions or work under the terms of Section 1 above, provided that you also meet  
all of these conditions:  
4.You may not copy, modify, sublicense, or distribute the Program except as  
expressly provided under this License.Any attempt otherwise to copy, modify,  
sublicense or distribute the Program is void, and will automatically terminate your  
rights under this License. However, parties who have received copies, or rights,  
from you under this License will not have their licenses terminated so long as  
such parties remain in full compliance.  
5.You are not required to accept this License, since you have not signed it. How-  
ever, nothing else grants you permission to modify or distribute the Program or  
its derivative works.These actions are prohibited by law if you do not accept this  
License.Therefore, by modifying or distributing the Program (or any work based  
on the Program), you indicate your acceptance of this License to do so, and all its  
terms and conditions for copying, distributing or modifying the Program or works  
based on it.  
6. Each time you redistribute the Program (or any work based on the Program),  
the recipient automatically receives a license from the original licensor to copy,  
distribute or modify the Program subject to these terms and conditions.You  
may not impose any further restrictions on the recipients' exercise of the rights  
granted herein.You are not responsible for enforcing compliance by third parties  
to this License.  
7. If, as a consequence of a court judgment or allegation of patent infringement or  
for any other reason (not limited to patent issues), conditions are imposed on you  
(whether by court order, agreement or otherwise) that contradict the conditions  
of this License, they do not excuse you from the conditions of this License. If you  
cannot distribute so as to satisfy simultaneously your obligations under this License  
and any other pertinent obligations, then as a consequence you may not distribute  
the Program at all. For example, if a patent license would not permit royalty-free  
redistribution of the Program by all those who receive copies directly or indirectly  
through you, then the only way you could satisfy both it and this License would be  
to refrain entirely from distribution of the Program.  
If any portion of this section is held invalid or unenforceable under any particular  
circumstance, the balance of the section is intended to apply and the section as a  
whole is intended to apply in other circumstances.  
It is not the purpose of this section to induce you to infringe any patents or other  
property right claims or to contest validity of any such claims; this section has the  
sole purpose of protecting the integrity of the free software distribution system,  
which is implemented by public license practices. Many people have made generous  
contributions to the wide range of software distributed through that system in reli-  
ance on consistent application of that system; it is up to the author/donor to decide  
if he or she is willing to distribute software through any other system and a licensee  
cannot impose that choice.  
a)You must cause the modied les to carry prominent notices stating that you  
changed the les and the date of any change.  
b)You must cause any work that you distribute or publish, that in whole or in part  
contains or is derived from the Program or any part thereof, to be licensed as a  
whole at no charge to all third parties under the terms of this License.  
c) If the modied program normally reads commands interactively when run, you  
This section is intended to make thoroughly clear what is believed to be a conse-  
quence of the rest of this License.  
8. If the distribution and/or use of the Program is restricted in certain countries  
Download from Www.Somanuals.com. All Manuals Search And Download.  
either by patents or by copyrighted interfaces, the original copyright holder who  
places the Program under this License may add an explicit geographical distribu-  
tion limitation excluding those countries, so that distribution is permitted only in  
or among countries not thus excluded. In such case, this License incorporates  
the limitation as if written in the body of this License.  
9.The Free Software Foundation may publish revised and/or new versions of the  
General Public License from time to time. Such new versions will be similar in  
spirit to the present version, but may differ in detail to address new problems or  
concerns.  
Each version is given a distinguishing version number. If the Program species a  
version number of this License which applies to it and "any later version", you have  
the option of following the terms and conditions either of that version or of any  
later version published by the Free Software Foundation. If the Program does  
not specify a version number of this License, you may choose any version ever  
published by the Free Software Foundation.  
LGPL  
GNU LESSER GENERAL PUBLIC LICENSE  
Version 2.1, February 1999  
Copyright (C) 1991, 1999 Free Software Foundation, Inc.  
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA  
Everyone is permitted to copy and distribute verbatim copies of this license docu-  
ment, but changing it is not allowed.  
[This is the rst released version of the Lesser GPL. It also counts as the successor  
of the GNU Library Public License, version 2, hence the version number 2.1.]  
Preamble  
The licenses for most software are designed to take away your freedom to share  
and change it. By contrast, the GNU General Public Licenses are intended to guar-  
antee your freedom to share and change free software--to make sure the software  
is free for all its users.  
This license, the Lesser General Public License, applies to some specially designated  
software packages--typically libraries--of the Free Software Foundation and other  
authors who decide to use it. You can use it too, but we suggest you rst think  
carefully about whether this license or the ordinary General Public License is the  
better strategy to use in any particular case, based on the explanations below.  
When we speak of free software, we are referring to freedom of use, not price.  
Our General Public Licenses are designed to make sure that you have the freedom  
to distribute copies of free software (and charge for this service if you wish);  
that you receive source code or can get it if you want it; that you can change the  
software and use pieces of it in new free programs; and that you are informed that  
you can do these things.  
To protect your rights, we need to make restrictions that forbid distributors to  
deny you these rights or to ask you to surrender these rights. These restrictions  
translate to certain responsibilities for you if you distribute copies of the library or  
if you modify it.  
For example, if you distribute copies of the library, whether gratis or for a fee, you  
must give the recipients all the rights that we gave you. You must make sure that  
they, too, receive or can get the source code. If you link other code with the library,  
you must provide complete object les to the recipients, so that they can relink  
them with the library after making changes to the library and recompiling it. And  
you must show them these terms so they know their rights.  
We protect your rights with a two-step method: (1) we copyright the library, and  
(2) we offer you this license, which gives you legal permission to copy, distribute  
and/or modify the library.  
To protect each distributor, we want to make it very clear that there is no warranty  
for the free library. Also, if the library is modied by someone else and passed on,  
the recipients should know that what they have is not the original version, so that  
the original author's reputation will not be affected by problems that might be  
introduced by others.  
Finally, software patents pose a constant threat to the existence of any free pro-  
gram. We wish to make sure that a company cannot effectively restrict the users  
of a free program by obtaining a restrictive license from a patent holder. Therefore,  
we insist that any patent license obtained for a version of the library must be  
consistent with the full freedom of use specied in this license.  
Most GNU software, including some libraries, is covered by the ordinary GNU  
General Public License. This license, the GNU Lesser General Public License, ap-  
plies to certain designated libraries, and is quite different from the ordinary General  
Public License. We use this license for certain libraries in order to permit linking  
those libraries into non-free programs.  
When a program is linked with a library, whether statically or using a shared library,  
the combination of the two is legally speaking a combined work, a derivative of the  
original library. The ordinary General Public License therefore permits such linking  
only if the entire combination ts its criteria of freedom. The Lesser General Public  
License permits more lax criteria for linking other code with the library.  
We call this license the "Lesser" General Public License because it does Less  
to protect the user's freedom than the ordinary General Public License. It also  
provides other free software developers Less of an advantage over competing non-  
free programs. These disadvantages are the reason we use the ordinary General  
Public License for many libraries. However, the Lesser license provides advantages  
in certain special circumstances.  
For example, on rare occasions, there may be a special need to encourage the  
widest possible use of a certain library, so that it becomes a de-facto standard. To  
achieve this, non-free programs must be allowed to use the library. A more fre-  
quent case is that a free library does the same job as widely used non-free libraries.  
In this case, there is little to gain by limiting the free library to free software only, so  
we use the Lesser General Public License.  
In other cases, permission to use a particular library in non-free programs enables  
a greater number of people to use a large body of free software. For example,  
permission to use the GNU C Library in non-free programs enables many more  
people to use the whole GNU operating system, as well as its variant, the GNU/  
Linux operating system.  
Although the Lesser General Public License is Less protective of the users' free-  
dom, it does ensure that the user of a program that is linked with the Library has  
the freedom and the wherewithal to run that program using a modied version of  
the Library.  
10. If you wish to incorporate parts of the Program into other free programs  
whose distribution conditions are different, write to the author to ask for  
permission. For software which is copyrighted by the Free Software Foundation,  
write to the Free Software Foundation; we sometimes make exceptions for this.  
Our decision will be guided by the two goals of preserving the free status of  
all derivatives of our free software and of promoting the sharing and reuse of  
software generally.  
NO WARRANTY  
11. BECAUSETHE PROGRAM IS LICENSED FREE OF CHARGE,THERE IS NO  
WARRANTY FORTHE PROGRAM,TOTHE EXTENT PERMITTED BY AP-  
PLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITINGTHE  
COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDETHE PRO-  
GRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED  
OR IMPLIED, INCLUDING, BUT NOT LIMITEDTO,THE IMPLIED WARRAN-  
TIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  
THE ENTIRE RISK ASTOTHE QUALITY AND PERFORMANCE OFTHE  
PROGRAM IS WITHYOU. SHOULDTHE PROGRAM PROVE DEFECTIVE,  
YOU ASSUMETHE COST OF ALL NECESSARY SERVICING, REPAIR OR  
CORRECTION.  
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREEDTO  
IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY  
WHO MAY MODIFY AND/OR REDISTRIBUTETHE PROGRAM AS PER-  
MITTED ABOVE, BE LIABLETOYOU FOR DAMAGES, INCLUDING ANY  
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARIS-  
ING OUT OFTHE USE OR INABILITYTO USETHE PROGRAM (INCLUD-  
ING BUT NOT LIMITEDTO LOSS OF DATA OR DATA BEING RENDERED  
INACCURATE OR LOSSES SUSTAINED BYYOU ORTHIRD PARTIES OR  
A FAILURE OFTHE PROGRAMTO OPERATE WITH ANY OTHER PRO-  
GRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED  
OFTHE POSSIBILITY OF SUCH DAMAGES.  
END OFTERMS AND CONDITIONS  
How to ApplyTheseTerms toYour New Programs  
If you develop a new program, and you want it to be of the greatest possible use to  
the public, the best way to achieve this is to make it free software which everyone  
can redistribute and change under these terms.  
To do so, attach the following notices to the program. It is safest to attach them to  
the start of each source le to most effectively convey the exclusion of warranty;  
and each le should have at least the "copyright" line and a pointer to where the  
full notice is found.  
one line to give the program's name and an idea of what it does.  
Copyright (C) yyyy name of author  
This program is free software; you can redistribute it and/or modify it under the  
terms of the GNU General Public License as published by the Free Software Foun-  
dation; either version 2 of the License, or (at your option) any later version.  
This program is distributed in the hope that it will be useful, but WITHOUT ANY  
WARRANTY; without even the implied warranty of MERCHANTABILITY or FIT-  
NESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for  
more details.  
You should have received a copy of the GNU General Public License along with  
this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street,  
Fifth Floor, Boston, MA 02110-1301, USA.Also add information on how to contact  
you by electronic and paper mail.  
If the program is interactive, make it output a short notice like this when it starts in  
an interactive mode:  
Gnomovision version 69, Copyright (C) year name of author Gnomovision comes  
with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free  
software, and you are welcome to redistribute it under certain conditions; type  
`show c' for details.  
The hypothetical commands `show w' and `show c' should show the appropriate  
parts of the General Public License. Of course, the commands you use may be  
called something other than `show w' and `show c'; they could even be mouse-  
clicks or menu items--whatever suits your program.  
You should also get your employer (if you work as a programmer) or your school,  
if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample;  
alter the names:  
The precise terms and conditions for copying, distribution and modication follow.  
Pay close attention to the difference between a "work based on the library" and  
a "work that uses the library". The former contains code derived from the library,  
whereas the latter must be combined with the library in order to run.  
GNU LESSER GENERAL PUBLIC LICENSE  
Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision'  
(which makes passes at compilers) written by James Hacker.  
signature ofTy Coon, 1 April 1989  
Ty Coon, President ofVice  
This General Public License does not permit incorporating your program into pro-  
prietary programs. If your program is a subroutine library, you may consider it more  
useful to permit linking proprietary applications with the library. If this is what you  
want to do, use the GNU Lesser General Public License instead of this License.  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICA-  
TION  
0.This License Agreement applies to any software library or other program which  
contains a notice placed by the copyright holder or other authorized party saying  
it may be distributed under the terms of this Lesser General Public License (also  
called "this License"). Each licensee is addressed as "you".  
If you are interested in obtaining GPL source code used in this product, please  
contact P&F USA, Inc.,  
A "library" means a collection of software functions and/or data prepared so as to  
PO Box 430 Daleville, IN 47334-0430 U.S.A.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
be conveniently linked with application programs (which use some of those func-  
tions and data) to form executables.  
Library even though the source code is not.Whether this is true is especially signi-  
cant if the work can be linked without the Library, or if the work is itself a library.  
The threshold for this to be true is not precisely dened by law.  
If such an object le uses only numerical parameters, data structure layouts and  
accessors, and small macros and small inline functions (ten lines or less in length),  
then the use of the object le is unrestricted, regardless of whether it is legally  
a derivative work. (Executables containing this object code plus portions of the  
Library will still fall under Section 6.)  
The "Library", below, refers to any such software library or work which has been  
distributed under these terms. A "work based on the Library" means either the  
Library or any derivative work under copyright law: that is to say, a work containing  
the Library or a portion of it, either verbatim or with modications and/or trans-  
lated straightforwardly into another language. (Hereinafter, translation is included  
without limitation in the term "modication".)  
"Source code" for a work means the preferred form of the work for making modi-  
cations to it. For a library, complete source code means all the source code for  
all modules it contains, plus any associated interface denition les, plus the scripts  
used to control compilation and installation of the library.  
Activities other than copying, distribution and modication are not covered by this  
License; they are outside its scope. The act of running a program using the Library  
is not restricted, and output from such a program is covered only if its contents  
constitute a work based on the Library (independent of the use of the Library in  
a tool for writing it). Whether that is true depends on what the Library does and  
what the program that uses the Library does.  
1.You may copy and distribute verbatim copies of the Library's complete source  
code as you receive it, in any medium, provided that you conspicuously and ap-  
propriately publish on each copy an appropriate copyright notice and disclaimer  
of warranty; keep intact all the notices that refer to this License and to the  
absence of any warranty; and distribute a copy of this License along with the  
Library.  
You may charge a fee for the physical act of transferring a copy, and you may at  
your option offer warranty protection in exchange for a fee.  
2.You may modify your copy or copies of the Library or any portion of it, thus  
forming a work based on the Library, and copy and distribute such modications  
or work under the terms of Section 1 above, provided that you also meet all of  
these conditions:  
a)The modied work must itself be a software library.  
b)You must cause the les modied to carry prominent notices stating that you  
changed the les and the date of any change.  
c)You must cause the whole of the work to be licensed at no charge to all third  
parties under the terms of this License.  
Otherwise, if the work is a derivative of the Library, you may distribute the object  
code for the work under the terms of Section 6.Any executables containing that  
work also fall under Section 6, whether or not they are linked directly with the  
Library itself.  
6.As an exception to the Sections above, you may also combine or link a "work  
that uses the Library" with the Library to produce a work containing portions  
of the Library, and distribute that work under terms of your choice, provided  
that the terms permit modication of the work for the customer's own use and  
reverse engineering for debugging such modications.  
You must give prominent notice with each copy of the work that the Library is  
used in it and that the Library and its use are covered by this License. You must  
supply a copy of this License. If the work during execution displays copyright  
notices, you must include the copyright notice for the Library among them, as well  
as a reference directing the user to the copy of this License. Also, you must do one  
of these things:  
a) Accompany the work with the complete corresponding machine-readable  
source code for the Library including whatever changes were used in the work  
(which must be distributed under Sections 1 and 2 above); and, if the work is an  
executable linked with the Library, with the complete machine-readable "work  
that uses the Library", as object code and/or source code, so that the user can  
modify the Library and then relink to produce a modied executable containing  
the modied Library. (It is understood that the user who changes the contents  
of denitions les in the Library will not necessarily be able to recompile the  
application to use the modied denitions.)  
b) Use a suitable shared library mechanism for linking with the Library. A suitable  
mechanism is one that (1) uses at run time a copy of the library already present  
on the user's computer system, rather than copying library functions into the  
executable, and (2) will operate properly with a modied version of the library, if  
the user installs one, as long as the modied version is interface-compatible with  
the version that the work was made with.  
c) Accompany the work with a written offer, valid for at least three years, to give  
the same user the materials specied in Subsection 6a, above, for a charge no  
more than the cost of performing this distribution.  
d) If a facility in the modied Library refers to a function or a table of data to  
be supplied by an application program that uses the facility, other than as an  
argument passed when the facility is invoked, then you must make a good faith  
effort to ensure that, in the event an application does not supply such function or  
table, the facility still operates, and performs whatever part of its purpose remains  
meaningful.  
(For example, a function in a library to compute square roots has a purpose that  
is entirely well-dened independent of the application. Therefore, Subsection 2d  
requires that any application-supplied function or table used by this function must  
be optional: if the application does not supply it, the square root function must  
still compute square roots.)  
These requirements apply to the modied work as a whole. If identiable sections  
of that work are not derived from the Library, and can be reasonably considered  
independent and separate works in themselves, then this License, and its terms, do  
not apply to those sections when you distribute them as separate works. But when  
you distribute the same sections as part of a whole which is a work based on the  
Library, the distribution of the whole must be on the terms of this License, whose  
permissions for other licensees extend to the entire whole, and thus to each and  
every part regardless of who wrote it.  
Thus, it is not the intent of this section to claim rights or contest your rights to  
work written entirely by you; rather, the intent is to exercise the right to control the  
distribution of derivative or collective works based on the Library.  
In addition, mere aggregation of another work not based on the Library with the  
Library (or with a work based on the Library) on a volume of a storage or distribu-  
tion medium does not bring the other work under the scope of this License.  
3.You may opt to apply the terms of the ordinary GNU General Public License  
instead of this License to a given copy of the Library. To do this, you must alter  
all the notices that refer to this License, so that they refer to the ordinary GNU  
General Public License, version 2, instead of to this License. (If a newer version  
than version 2 of the ordinary GNU General Public License has appeared, then  
you can specify that version instead if you wish.) Do not make any other change  
in these notices.  
d) If distribution of the work is made by offering access to copy from a desig-  
nated place, offer equivalent access to copy the above specied materials from  
the same place.  
e)Verify that the user has already received a copy of these materials or that you  
have already sent this user a copy.  
For an executable, the required form of the "work that uses the Library" must  
include any data and utility programs needed for reproducing the executable from  
it. However, as a special exception, the materials to be distributed need not include  
anything that is normally distributed (in either source or binary form) with the  
major components (compiler, kernel, and so on) of the operating system on which  
the executable runs, unless that component itself accompanies the executable.  
It may happen that this requirement contradicts the license restrictions of other  
proprietary libraries that do not normally accompany the operating system. Such  
a contradiction means you cannot use both them and the Library together in an  
executable that you distribute.  
7.You may place library facilities that are a work based on the Library side-by-side  
in a single library together with other library facilities not covered by this License,  
and distribute such a combined library, provided that the separate distribution  
of the work based on the Library and of the other library facilities is otherwise  
permitted, and provided that you do these two things:  
a) Accompany the combined library with a copy of the same work based on  
the Library, uncombined with any other library facilities. This must be distributed  
under the terms of the Sections above.  
b) Give prominent notice with the combined library of the fact that part of it  
is a work based on the Library, and explaining where to nd the accompanying  
uncombined form of the same work.  
Once this change is made in a given copy, it is irreversible for that copy, so the or-  
dinary GNU General Public License applies to all subsequent copies and derivative  
works made from that copy.  
This option is useful when you wish to copy part of the code of the Library into a  
program that is not a library.  
8.You may not copy, modify, sublicense, link with, or distribute the Library except  
as expressly provided under this License. Any attempt otherwise to copy, modify,  
sublicense, link with, or distribute the Library is void, and will automatically termi-  
nate your rights under this License. However, parties who have received copies,  
or rights, from you under this License will not have their licenses terminated so  
long as such parties remain in full compliance.  
9.You are not required to accept this License, since you have not signed it. How-  
ever, nothing else grants you permission to modify or distribute the Library or its  
derivative works. These actions are prohibited by law if you do not accept this  
License. Therefore, by modifying or distributing the Library (or any work based  
on the Library), you indicate your acceptance of this License to do so, and all its  
terms and conditions for copying, distributing or modifying the Library or works  
based on it.  
10. Each time you redistribute the Library (or any work based on the Library),  
the recipient automatically receives a license from the original licensor to copy,  
distribute, link with or modify the Library subject to these terms and condi-  
tions. You may not impose any further restrictions on the recipients' exercise  
of the rights granted herein.You are not responsible for enforcing compliance  
by third parties with this License.  
11. If, as a consequence of a court judgment or allegation of patent infringement  
or for any other reason (not limited to patent issues), conditions are imposed  
on you (whether by court order, agreement or otherwise) that contradict the  
conditions of this License, they do not excuse you from the conditions of this  
License. If you cannot distribute so as to satisfy simultaneously your obligations  
4.You may copy and distribute the Library (or a portion or derivative of it, under  
Section 2) in object code or executable form under the terms of Sections 1  
and 2 above provided that you accompany it with the complete corresponding  
machine-readable source code, which must be distributed under the terms of  
Sections 1 and 2 above on a medium customarily used for software interchange.  
If distribution of object code is made by offering access to copy from a designated  
place, then offering equivalent access to copy the source code from the same place  
satises the requirement to distribute the source code, even though third parties  
are not compelled to copy the source along with the object code.  
5.A program that contains no derivative of any portion of the Library, but is  
designed to work with the Library by being compiled or linked with it, is called a  
"work that uses the Library". Such a work, in isolation, is not a derivative work of  
the Library, and therefore falls outside the scope of this License.  
However, linking a "work that uses the Library" with the Library creates an execut-  
able that is a derivative of the Library (because it contains portions of the Library),  
rather than a "work that uses the library". The executable is therefore covered by  
this License. Section 6 states terms for distribution of such executables.  
When a "work that uses the Library" uses material from a header le that is part  
of the Library, the object code for the work may be a derivative work of the  
Download from Www.Somanuals.com. All Manuals Search And Download.  
under this License and any other pertinent obligations, then as a consequence  
you may not distribute the Library at all. For example, if a patent license would  
not permit royalty-free redistribution of the Library by all those who receive  
copies directly or indirectly through you, then the only way you could satisfy  
both it and this License would be to refrain entirely from distribution of the  
Library.  
alter the names:  
Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob' (a  
library for tweaking knobs) written by James Random Hacker.  
<signature ofTy Coon>, 1 April 1990  
Ty Coon, President ofVice  
That's all there is to it!  
If any portion of this section is held invalid or unenforceable under any particular  
circumstance, the balance of the section is intended to apply, and the section as a  
whole is intended to apply in other circumstances.  
If you are interested in obtaining LGPL source code used in this product, please  
contact P&F USA, Inc.,  
It is not the purpose of this section to induce you to infringe any patents or other  
property right claims or to contest validity of any such claims; this section has the  
sole purpose of protecting the integrity of the free software distribution system  
which is implemented by public license practices. Many people have made gener-  
ous contributions to the wide range of software distributed through that system  
in reliance on consistent application of that system; it is up to the author/donor to  
decide if he or she is willing to distribute software through any other system and a  
licensee cannot impose that choice.  
PO Box 430 Daleville, IN 47334-0430 U.S.A.  
BSD  
Copyright (c) 2003-2010, Jouni Malinen <j@w1.> and contributors All Rights  
Reserved.  
Redistribution and use in source and binary forms, with or without modication,  
are permitted provided that the following conditions are met:  
This section is intended to make thoroughly clear what is believed to be a conse-  
quence of the rest of this License.  
1. Redistributions of source code must retain the above copyright notice, this list of  
conditions and the following disclaimer.  
2. Redistributions in binary form must reproduce the above copyright notice, this  
list of conditions and the following disclaimer in the documentation and/or other  
materials provided with the distribution.  
3. Neither the name(s) of the above-listed copyright holder(s) nor the names of  
its contributors may be used to endorse or promote products derived from this  
software without specic prior written permission.  
THIS SOFTWARE IS PROVIDED BYTHE COPYRIGHT HOLDERS AND CON-  
TRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUD-  
ING, BUT NOT LIMITEDTO,THE IMPLIED WARRANTIES OF MERCHANT-  
ABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  
IN NO EVENT SHALLTHE COPYRIGHT OWNER OR CONTRIBUTORS BE  
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR  
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITEDTO, PRO-  
CUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR  
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY  
THEORY OF LIABILITY,WHETHER IN CONTRACT, STRICT LIABILITY, ORTORT  
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT  
OFTHE USE OFTHIS SOFTWARE, EVEN IF ADVISED OFTHE POSSIBILITY OF  
SUCH DAMAGE.  
12. If the distribution and/or use of the Library is restricted in certain countries  
either by patents or by copyrighted interfaces, the original copyright holder  
who places the Library under this License may add an explicit geographical  
distribution limitation excluding those countries, so that distribution is permit-  
ted only in or among countries not thus excluded. In such case, this License  
incorporates the limitation as if written in the body of this License.  
13.The Free Software Foundation may publish revised and/or new versions of the  
Lesser General Public License from time to time. Such new versions will be  
similar in spirit to the present version, but may differ in detail to address new  
problems or concerns.  
Each version is given a distinguishing version number. If the Library species a ver-  
sion number of this License which applies to it and "any later version", you have the  
option of following the terms and conditions either of that version or of any later  
version published by the Free Software Foundation. If the Library does not specify  
a license version number, you may choose any version ever published by the Free  
Software Foundation.  
14. If you wish to incorporate parts of the Library into other free programs whose  
distribution conditions are incompatible with these, write to the author to ask  
for permission. For software which is copyrighted by the Free Software Foun-  
dation, write to the Free Software Foundation; we sometimes make exceptions  
for this. Our decision will be guided by the two goals of preserving the free  
status of all derivatives of our free software and of promoting the sharing and  
reuse of software generally.  
MIT  
--------------------------------------------  
NO WARRANTY  
expat  
15. BECAUSETHE LIBRARY IS LICENSED FREE OF CHARGE,THERE IS NO  
WARRANTY FORTHE LIBRARY,TOTHE EXTENT PERMITTED BY AP-  
PLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITINGTHE  
COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDETHE LIBRARY  
"AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IM-  
PLIED, INCLUDING, BUT NOT LIMITEDTO,THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE  
ENTIRE RISK ASTOTHE QUALITY AND PERFORMANCE OFTHE LIBRARY  
IS WITHYOU. SHOULDTHE LIBRARY PROVE DEFECTIVE,YOU ASSUME  
THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.  
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED  
TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER  
PARTY WHO MAY MODIFY AND/OR REDISTRIBUTETHE LIBRARY AS  
PERMITTED ABOVE, BE LIABLETOYOU FOR DAMAGES, INCLUDING ANY  
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARIS-  
ING OUT OFTHE USE OR INABILITYTO USETHE LIBRARY (INCLUDING  
BUT NOT LIMITEDTO LOSS OF DATA OR DATA BEING RENDERED  
INACCURATE OR LOSSES SUSTAINED BYYOU ORTHIRD PARTIES OR A  
FAILURE OFTHE LIBRARYTO OPERATE WITH ANY OTHER SOFTWARE),  
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OFTHE  
POSSIBILITY OF SUCH DAMAGES.  
Copyright © 1998, 1999, 2000Thai Open Source Software Center Ltd and Clark Cooper  
Copyright © 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.  
--------------------------------------------  
lua  
Copyright © 1994 -2010 Lua.org, PUC-Rio.  
--------------------------------------------  
lua-xmlreader  
Copyright © 2008 A.S. Bradbury  
--------------------------------------------  
lua-slncrypto  
Copyright © 2005 Malete Partner, Berlin, [email protected]  
--------------------------------------------  
libxml2  
Copyright © 1998-2003 DanielVeillard. All Rights Reserved.  
--------------------------------------------  
Permission is hereby granted, free of charge, to any person obtaining a copy of  
this software and associated documentation les (the "Software"), to deal in the  
Software without restriction, including without limitation the rights to use, copy,  
modify, merge, publish, distribute, sublicense, and/or sell copies of the Software,  
and to permit persons to whom the Software is furnished to do so, subject to the  
following conditions:  
END OFTERMS AND CONDITIONS  
The above copyright notice and this permission notice shall be included in all cop-  
ies or substantial portions of the Software.  
How to ApplyTheseTerms toYour New Libraries  
If you develop a new library, and you want it to be of the greatest possible use to  
the public, we recommend making it free software that everyone can redistribute  
and change. You can do so by permitting redistribution under these terms (or,  
alternatively, under the terms of the ordinary General Public License).  
To apply these terms, attach the following notices to the library. It is safest to at-  
tach them to the start of each source le to most effectively convey the exclusion  
of warranty; and each le should have at least the "copyright" line and a pointer to  
where the full notice is found.  
THE SOFTWARE IS PROVIDED "AS IS",WITHOUT WARRANTY OF ANY KIND,  
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITEDTOTHE WARRAN-  
TIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND  
NONINFRINGEMENT. IN NO EVENT SHALLTHE AUTHORS OR COPYRIGHT  
HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,  
WHETHER IN AN ACTION OF CONTRACT,TORT OR OTHERWISE,ARISING  
FROM, OUT OF OR IN CONNECTION WITHTHE SOFTWARE ORTHE USE  
OR OTHER DEALINGS INTHE SOFTWARE.  
<one line to give the library's name and a brief idea of what it does.>  
Copyright (C) <year> <name of author>  
MIT/X  
This library is free software; you can redistribute it and/or modify it under the  
terms of the GNU Lesser General Public License as published by the Free  
Software Foundation; either version 2.1 of the License, or (at your option) any  
later version.  
This library is distributed in the hope that it will be useful, but WITHOUT ANY  
WARRANTY; without even the implied warranty of MERCHANTABILITY or  
FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public  
License for more details.  
You should have received a copy of the GNU Lesser General Public License  
along with this library; if not, write to the Free Software Foundation, Inc., 51  
Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA  
Also add information on how to contact you by electronic and paper mail.  
You should also get your employer (if you work as a programmer) or your school,  
if any, to sign a "copyright disclaimer" for the library, if necessary. Here is a sample;  
COPYRIGHT AND PERMISSION NOTICE  
Copyright (c) 1996 - 2009, Daniel Stenberg, <[email protected]>.  
All rights reserved.  
Permission to use, copy, modify, and distribute this software for any purpose with  
or without fee is hereby granted, provided that the above copyright notice and this  
permission notice appear in all copies.  
THE SOFTWARE IS PROVIDED "AS IS",WITHOUT WARRANTY OF ANY KIND,  
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITEDTOTHE WARRAN-  
TIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND  
NONINFRINGEMENT OFTHIRD PARTY RIGHTS. IN NO EVENT SHALLTHE  
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAM-  
AGES OR OTHER LIABILITY,WHETHER IN AN ACTION OF CONTRACT,TORT  
OR OTHERWISE,ARISING FROM, OUT OF OR IN CONNECTION WITHTHE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOFTWARE ORTHE USE OR OTHER DEALINGS INTHE SOFTWARE.  
Except as contained in this notice, the name of a copyright holder shall not be  
used in advertising or otherwise to promote the sale, use or other dealings in this  
Software without prior written authorization of the copyright holder.  
This library is free for commercial and non-commercial use as long as the  
following conditions are aheared to. The following conditions apply to all code  
found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the  
SSL code. The SSL documentation included with this distribution is covered by  
the same copyright terms except that the holder isTim Hudson (tjh@cryptsoft.  
com).  
Copyright remains EricYoung's, and as such any Copyright notices in the code  
are not to be removed.  
If this package is used in a product, EricYoung should be given attribution as the  
author of the parts of the library used.  
This can be in the form of a textual message at program startup or in documen-  
tation (online or textual) provided with the package.  
Redistribution and use in source and binary forms, with or without modication,  
are permitted provided that the following conditions are met:  
1. Redistributions of source code must retain the copyright notice, this list of  
conditions and the following disclaimer.  
2. Redistributions in binary form must reproduce the above copyright notice,  
this list of conditions and the following disclaimer in the documentation and/  
or other materials provided with the distribution.  
3. All advertising materials mentioning features or use of this software must  
display the following acknowledgement: "This product includes cryptographic  
software written by EricYoung ([email protected])"The word 'crypto-  
graphic' can be left out if the rouines from the library being used are not  
cryptographic related :-).  
4. If you include any Windows specic code (or a derivative thereof) from the  
apps directory (application code) you must include an acknowledgement:  
"This product includes software written byTim Hudson ([email protected])"  
THIS SOFTWARE IS PROVIDED BY ERICYOUNG ``AS IS'' AND ANY  
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITEDTO,  
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR  
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALLTHE  
AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,  
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES  
(INCLUDING, BUT NOT LIMITEDTO, PROCUREMENT OF SUBSTITUTE  
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS  
INTERRUPTION) HOWEVER CAUSED AND ON ANYTHEORY OF LIABIL-  
ITY,WHETHER IN CONTRACT, STRICT LIABILITY, ORTORT (INCLUDING  
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OFTHE USE  
OFTHIS SOFTWARE, EVEN IF ADVISED OFTHE POSSIBILITY OF SUCH  
DAMAGE.  
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*/  
gSOAP  
Part of the software embedded in this product is gSOAP software.  
Portions created by gSOAP are Copyright (C) 2001-2009 Robert A. van Engelen,  
Genivia inc.All Rights Reserved.  
THE SOFTWARE INTHIS PRODUCT WAS IN PART PROVIDED BY GENIVIA  
INC AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT  
LIMITEDTO,THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FIT-  
NESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL  
THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,  
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIM-  
ITEDTO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF  
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED  
AND ON ANYTHEORY OF LIABILITY,WHETHER IN CONTRACT, STRICT  
LIABILITY, ORTORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN  
ANY WAY OUT OFTHE USE OFTHIS SOFTWARE, EVEN IF ADVISED OFTHE  
POSSIBILITY OF SUCH DAMAGE.  
FreeType  
Portions of this software are copyright (c) 2001, 2002, 2003, 2004, 2006The  
LibJPEG  
This software is based in part on the work of the Independent JPEG Group.  
Open SSL  
LICENSE ISSUES  
==========  
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the  
OpenSSL License and the original SSLeay license apply to the toolkit. See below  
for the actual license texts. Actually both licenses are BSD-style Open Source  
licenses. In case of any license issues related to OpenSSL please contact openssl-  
The licence and distribution terms for any publically available version or deriva-  
tive of this code cannot be changed. i.e. this code cannot simply be copied and  
put under another distribution licence  
OpenSSL License  
----------------------  
[including the GNU Public Licence.]  
/*  
===============================================  
Copyright (c) 1998-2008The OpenSSL Project. All rights reserved.  
Redistribution and use in source and binary forms, with or without modication,  
are permitted provided that the following conditions are met:  
1. Redistributions of source code must retain the above copyright notice, this list  
of conditions and the following disclaimer.  
2. Redistributions in binary form must reproduce the above copyright notice,  
this list of conditions and the following disclaimer in the documentation and/  
or other materials provided with the distribution.  
3. All advertising materials mentioning features or use of this software must  
display the following acknowledgment: "This product includes software devel-  
oped by the OpenSSL Project for use in the OpenSSLToolkit. (http://www.  
openssl.org/)"  
4.The names "OpenSSLToolkit" and "OpenSSL Project" must not be used to en-  
dorse or promote products derived from this software without prior written  
permission. For written permission, please contact [email protected].  
5. Products derived from this software may not be called "OpenSSL" nor may  
"OpenSSL" appear in their names without prior written permission of the  
OpenSSL Project.  
6. Redistributions of any form whatsoever must retain the following acknowledg-  
ment: "This product includes software developed by the OpenSSL Project for  
use in the OpenSSLToolkit (http://www.openssl.org/)"  
THIS SOFTWARE IS PROVIDED BYTHE OpenSSL PROJECT ``AS IS'' AND  
ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIM-  
ITEDTO,THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS  
FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL  
THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY  
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUEN-  
TIAL DAMAGES (INCLUDING, BUT NOT LIMITEDTO, PROCUREMENT OF  
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR  
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANYTHEORY  
OF LIABILITY,WHETHER IN CONTRACT, STRICT LIABILITY, ORTORT  
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT  
OFTHE USE OFTHIS SOFTWARE, EVEN IF ADVISED OFTHE POSSIBILITY  
OF SUCH DAMAGE.  
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Vera Fonts  
Copyright  
Copyright (c) 2003 by Bitstream, Inc.All Rights Reserved. BitstreamVera is a trade-  
mark of Bitstream, Inc.  
Permission is hereby granted, free of charge, to any person obtaining a copy of the  
fonts accompanying this license (“Fonts”) and associated documentation les (the  
“Font Software”), to reproduce and distribute the Font Software, including without  
limitation the rights to use, copy, merge, publish, distribute, and/or sell copies of the  
Font Software, and to permit persons to whom the Font Software is furnished to  
do so, subject to the following conditions:  
The above copyright and trademark notices and this permission notice shall be  
included in all copies of one or more of the Font Software typefaces.  
The Font Software may be modied, altered, or added to, and in particular the  
designs of glyphs or characters in the Fonts may be modied and additional glyphs  
or characters may be added to the Fonts, only if the fonts are renamed to names  
not containing either the words “Bitstream” or the word “Vera”.  
This License becomes null and void to the extent applicable to Fonts or Font Soft-  
ware that has been modied and is distributed under the “BitstreamVera” names.  
The Font Software may be sold as part of a larger software package but no copy of  
one or more of the Font Software typefaces may be sold by itself.  
THE FONT SOFTWARE IS PROVIDED "AS IS",WITHOUT WARRANTY OF  
ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITEDTO ANY  
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PUR-  
POSE AND NONINFRINGEMENT OF COPYRIGHT, PATENT,TRADEMARK, OR  
OTHER RIGHT. IN NO EVENT SHALL BITSTREAM ORTHE GNOME FOUNDA-  
TION BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, INCLUD-  
ING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL  
DAMAGES,WHETHER IN AN ACTION OF CONTRACT,TORT OR OTHER-  
WISE,ARISING FROM, OUT OFTHE USE OR INABILITYTO USETHE FONT  
SOFTWARE OR FROM OTHER DEALINGS INTHE FONT SOFTWARE.  
Except as contained in this notice, the names of Gnome, the Gnome Foundation,  
and Bitstream Inc., shall not be used in advertising or otherwise to promote the  
sale, use or other dealings in this Font Software without prior written authorization  
from the Gnome Foundation or Bitstream Inc., respectively. For further information,  
contact: fonts at gnome dot org.  
===============================================  
This product includes cryptographic software written by EricYoung (eay@  
cryptsoft.com). This product includes software written byTim Hudson (tjh@  
cryptsoft.com).  
xmlprc  
*/  
Original SSLeay License  
-----------------------------  
XML-RPC For C/C++ License  
-------------------------  
Copyright (C) 1995-1998 EricYoung ([email protected]) All rights reserved.  
This package is an SSL implementation written by EricYoung (eay@cryptsoft.  
com).  
Copyright (C) 2001 by First Peer, Inc.All rights reserved.  
Copyright (C) 2001 by Eric Kidd.All rights reserved.  
Redistribution and use in source and binary forms, with or without modication,  
are permitted provided that the following conditions are met:  
/*  
*
*
The implementation was written so as to conform with Netscapes SSL.  
*
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Redistributions of source code must retain the above copyright notice, this list of  
conditions and the following disclaimer.  
2. Redistributions in binary form must reproduce the above copyright notice, this  
list of conditions and the following disclaimer in the documentation and/or other  
materials provided with the distribution.  
3.The name of the author may not be used to endorse or promote products  
derived from this software without specic prior written permission.  
THIS SOFTWARE IS PROVIDED BYTHE AUTHOR AND CONTRIBUTORS ``AS  
IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT  
LIMITEDTO,THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FIT-  
NESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL  
THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,  
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (IN-  
CLUDING, BUT NOT LIMITEDTO, PROCUREMENT OF SUBSTITUTE GOODS  
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUP-  
TION) HOWEVER CAUSED AND ON ANYTHEORY OF LIABILITY,WHETHER  
IN CONTRACT, STRICT LIABILITY, ORTORT (INCLUDING NEGLIGENCE OR  
OTHERWISE) ARISING IN ANY WAY OUT OFTHE USE OFTHIS SOFTWARE,  
EVEN IF ADVISED OFTHE POSSIBILITY OF SUCH DAMAGE.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P&F USA, Inc.  
PO Box 430 Daleville, IN 47334-0430  
P&F Mexicana, S.A. de C.V.  
Av. La Palma No. 6, Col. San Fernando La Herradura,  
Huixquilucan Edo. de México  
C.P. 52787  
Meet Philips at the Internet  
ENERGIA  
BDP5506  
120 V ~ 60 Hz 20 W  
Comercializado por :  
IMPORTADOR:  
P&F Mexicana, S.A. DE C.V.  
Sojitz Mexicana, S.A. de C.V.  
Av. Paseo de las Palmas no. 239-302  
Col. Lomas de Chapultepec, c.p. 11000  
México, D.F.  
52 (55) 5202 - 7222  
EXPORTADOR :  
País de Origen :  
FUNAI ELECTRIC CO. L.T.D.  
CHINA  
GARANTIA INCLUIDA EN EL INSTRUCTIVO DE USO  
LEA CUIDADOSAMENTE ESTE INSTRUCTIVO  
ANTES DE USAR SU APARATO.  
★★★  
E5WA0UD  
Philips and Philips Shield are used under  
license of Koninklijke Philips Electronics N.V.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Peavey Microphone AAM 835 User Manual
Peerless Industries Network Router HDS200 User Manual
Pelco Paint Sprayer EH2200 User Manual
Philips Car Stereo System CEM200 User Manual
Philips Computer Monitor 107S77 User Manual
Philips Universal Remote SRU3007 27 User Manual
PLUS Vision Projection Television V3 131 User Manual
Porter Cable Satellite TV System DSR2210 User Manual
Poulan Tiller 175680 User Manual
PYLE Audio Indoor Furnishings PSW115 User Manual