01GB01COV.fm Page 1 Tuesday, November 25, 2008 11:41 AM
Register your product and get support at
SE6580
US-EN Additional Handset
Warning
Use only rechargeable batteries.
Charge the handset for 24 hours before use.
Download from Www.Somanuals.com. All Manuals Search And Download.
01GB01COV.book Page 1 Wednesday, November 19, 2008 5:04 PM
Table of contents
1
1.1
Safety Information
Equipment Approval
Information
Notification to the Local
Telephone Company
Rights of the Phone
Company
Interference Information
Hearing Aid Compatibility
(HAC)
FCC RF Radiation Exposure
Statement
3
3
3
6
Registration
15
15
16
16
6.1
6.1.1
6.1.2
6.2
Registering the handset
Easy registration
Manual registration
Checking the signal
strength
1.1.1
1.1.2
16
4
4
1.2
1.3
7
Using the Handset
Make a call
Predialing
Direct dialing
Answer a call
End a call
16
16
16
16
16
16
7.1
7.1.1
7.1.2
7.2
7.3
5
5
1.4
2
Important
5
2.1
2.2
Power requirements
Electric, Magnetic and
Electromagnetic Fields
(“EMF”)
6
8
Using the Intercom and
Conference Calling
Using the Intercom
Intercom another unit
Transfer an external call to
another unit
17
17
17
8.1
8.1.1
8.1.2
7
7
2.3
Recycle your batteries
17
18
®
3
3.1
The RBRC seal
7
8
8.1.3
8.1.4
Answer an external call
during intercom
Service Centers
Switch between an
internal and external call
Conference calling
Establish a three-party
conference call
4
Your phone
What’s in the box
Overview of your handset 11
Display icons and Messages13
10
10
18
18
4.1
4.2
4.3
8.2
8.2.1
18
5
Getting started
14
14
14
14
9
9.1
9.2
9.2.1
9.2.2
9.2.3
Personal settings
Change the Handset Name19
19
5.1
5.2
5.3
5.4
5.5
Connect the charger
Install the batteries
Charge the batteries
Remove/Attach belt clip 15
Install optional headset 15
Handset Tones
Set the Ring Volume
Set the Ring Tones
Activate/Deactivate Key
Beep
19
19
19
20
Table of contents
1
Download from Www.Somanuals.com. All Manuals Search And Download.
01GB01COV.book Page 2 Wednesday, November 19, 2008 5:04 PM
9.3
9.4
Change the Display
Language
Select the Display
Wallpaper
20
20
9.5
9.6
9.7
9.8
Select the Color Theme 20
Set the Display Contrast 21
Set the Backlight Time
Deactivate/Activate Auto
Hang-Up
21
21
10
10.1
10.2
Advanced settings
Registration
Unregister
22
22
22
11
12
Technical data
INDEX
22
23
Table of contents
2
Download from Www.Somanuals.com. All Manuals Search And Download.
01GB01COV.book Page 3 Wednesday, November 19, 2008 5:04 PM
A plug and jack used to connect this
equipment to the premises wiring and
telephone network must comply with the
applicable FCC Part 68 rules and
requirements adopted by the ACTA. A
compliant telephone cord and modular
plug is provided with this product. It is
designed to be connected to a
1 Safety
Information
1.1
Equipment Approval
Information
compatible modular jack that is also
compliant. See installation instructions
for details.
Your telephone equipment is approved
for connection to the public switched
telephone network and is in compliance
with parts 15 and 68, FCC Rules and
Regulations and the Technical
Notes
•
•
This equipment may not be used on
coin service provided by the
telephone company.
Requirements for Telephone Terminal
Equipment published by the ACTA.
Party lines are subject to state tariffs,
and therefore, you may not be able to
use your own telephone equipment if
you are on a party line. Check with
your local telephone company.
Notice must be given to the
telephone company upon permanent
disconnection of your telephone from
your line.
If your home has specially wired alarm
equipment connected to the
telephone line, ensure the installation
of this product does not disable your
alarm equipment. If you have
questions about what will disable
alarm equipment, consult your
telephone company or a qualified
installer.
1.1.1 Notification to the Local
Te le p ho n e C o m p a ny
On the bottom of this equipment is a
label indicating, among other
•
•
information, the US number and Ringer
Equivalence Number (REN) for the
equipment. You must, upon request,
provide this information to your
telephone company.
The REN is useful in determining the
number of devices you may connect to
your telephone line and still have all of
these devices ring when your telephone
number is called. In most (but not all)
areas, the sum of the RENs of all devices
connected to one line should not exceed
5. To be certain of the number of devices
you may connect to your line as
determined by the REN, you should
contact your local telephone company.
Safety Information
3
Download from Www.Somanuals.com. All Manuals Search And Download.
01GB01COV.book Page 4 Wednesday, November 19, 2008 5:04 PM
1.1.2 Rights of the Phone
1.2
Interference Information
Company
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful
interference; and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part 15
of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:
Should your equipment cause trouble on
your line, which may harm the telephone
network, the telephone company shall,
where practicable, notify you that
temporary discontinuance of service may
be required. Where prior notice is not
practicable and the circumstances
warrant such action, the telephone
company may temporarily discontinue
service immediately. In case of such
temporary discontinuance, the telephone
company must:
(1) promptly notify you of such
temporary discontinuance; (2) afford you
the opportunity to correct the situation;
and (3) inform you of your right to bring
a complaint to the Commission pursuant
to procedures set forth in Subpart E of
Part 68, FCC Rules and Regulations.
The telephone company may make
changes in its communications facilities,
equipment, operations or procedures
where such action is required in the
operation of its business and not
inconsistent with FCC rules and
Regulations. If these changes are
expected to affect the use or
performance of your telephone
equipment, the telephone company must
give you adequate notice, in writing, to
allow you to maintain uninterrupted
service.
•
Reorient or relocate the receiving
antenna (that is, the antenna for radio
or television that is “receiving” the
interference).
•
Reorient or relocate and increase the
separation between the
telecommunications equipment and
receiving antenna.
Safety Information
4
Download from Www.Somanuals.com. All Manuals Search And Download.
01GB01COV.book Page 5 Wednesday, November 19, 2008 5:04 PM
•
Connect the telecommunications
equipment to an outlet on a circuit
different from that to which the
receiving antenna is connected.
your body. This transmitter must not be
co-located or operating in conjunction
with any other antenna or transmitter.
For hand held operation, this phone has
been tested and meets the FCC RF
exposure guidelines. Use of other
If these measures do not eliminate the
interference, please consult your dealer
or an experienced radio / television
technician for additional suggestions.
Also, the Federal Communications
Commission has prepared a helpful
booklet, “How To Identify and Resolve
Radio/TV Interference Problems”. This
booklet is available from the U.S.
Government Printing Office,
accessories may not ensure compliance
with FCC RF exposure guidelines.
2
Important
Washington, D.C. 20402.
Please specify stock number 004-000-
00345-4 when ordering copies.
Notice: The changes or modifications
not expressly approved by the party
responsible for compliance could void
the user’s authority to operate the
equipment.
Take time to read this user manual
before you use your phone. It contains
important information and notes
regarding your phone.
NOTICE: This product meets the
applicable Industry Canada technical
specifications.
1.3
Hearing Aid Compatibility
(HAC)
The equipment must be installed using an
acceptable method of connection. The
customer should be aware that
compliance with the above conditions
may not prevent degradation of service
in some situations.
This telephone system meets FCC and
Industry Canada standards for Hearing
Aid Compatibility.
Repairs to certified equipment should be
made by an authorized Canadian
maintenance facility designated by the
supplier. Any repairs or alterations made
by the user to this equipment, or
equipment malfunctions, may give the
telecommunications company cause to
request the user to disconnect the
equipment.
1.4
FCC RF Radiation Exposure
Statement
This equipment complies with FCC RF
radiation exposure limits set forth for an
uncontrolled environment. This
equipment should be installed and
operated with a minimum distance of
20 centimeters between the radiator and
Important
5
Download from Www.Somanuals.com. All Manuals Search And Download.
01GB01COV.book Page 6 Wednesday, November 19, 2008 5:04 PM
Users should ensure for their own
protection that the electrical ground
connections of the power utility,
telephone lines and internal metallic
water pipe systems, if present, are
connected together. This precaution may
be particularly important in rural areas.
CAUTION: Users should not attempt to
make such connections themselves, but
should contact the appropriate electric
inspection authority, or electrician, as
appropriate.
recommended by Philips: risk of
explosion.
Always use the cables provided with
the product.
•
•
Handsfree activation could suddenly
increase the volume in the earpiece to
a very high level: make sure the
handset is not too close to your ear.
This equipment is not designed to
make emergency calls when the
power fails. An alternative has to be
made available to allow emergency
calls.
Do not expose the phone to
excessive heat caused by heating
equipment or direct sunlight.
Do not drop the phone or allow
objects to fall on the phone.
Do not use any cleaning agents
containing alcohol, ammonia, benzene,
or abrasives as these may harm the
set.
•
•
NOTES: This equipment may not be used
on coin service provided by the
telephone company.
•
•
2.1
Power requirements
•
This product requires an electrical
supply of 100-240 volts AC. In case of
power failure, the communication can
be lost.
•
The electrical network is classified as
hazardous. The only way to power
down the charger is to unplug the
power supply from the electrical
outlet. Ensure that the electrical
outlet is always easily accessible.
Warning
•
•
Do not use the product in places
where there are explosive hazards.
Do not let small metal objects come
into contact with the product. This
can deteriorate audio quality and
damage the product.
•
Active mobile phones in the vicinity
may cause interference.
To avoid damage or malfunction:
•
Do not allow the charging contacts or
the battery to come into contact with
metal objects.
Do not open the unit as you could be
exposed to high voltages.
Do not allow the charger to come
into contact with liquids.
Never use any other battery than the
one delivered with the product or
About operating and storage
temperatures:
•
Operate in a place where the
temperature is always between 0 and
35º C (32 to 95º F).
•
•
•
•
Store in a place where the
temperature is always between -20
and 70º C (-4 to 158º F).
Important
6
Download from Www.Somanuals.com. All Manuals Search And Download.
01GB01COV.book Page 7 Wednesday, November 19, 2008 5:04 PM
•
Battery life may be shortened in low
temperature conditions.
2.3
Recycle your batteries
Do not dispose of your rechargeable
batteries. Call the toll fee number 1-800-
822-8837 to get instructions on how to
recycle your batteries.
2.2
Electric, Magnetic and
Electromagnetic Fields
(“EMF”)
1. Philips Royal Electronics
manufactures and sells many
consumer-oriented products, which
usually, as with any electronic
apparatus, have the ability to emit
and receive electromagnetic signals.
2. One of Philips’ leading Business
Principles is to take all necessary
health and safety precautions for
our products, to comply with all
applicable legal requirements and to
stay well within the EMF standards
applicable at the time of producing
the products.
3. Philips is committed to developing,
producing and marketing products
that cause no adverse health effects.
4. Philips confirms that if its products
are handled properly for their
intended use, they are safe to use
according to the scientific evidence
available today.
®
3
The RBRC seal
®
The RBRC Seal
on the nickel metal
hydride battery
indicates that
Philips Royal
Electronics is
voluntarily
participating in an industry program to
collect and recycle these batteries at the
end of their useful lives, when taken out
of service within the United States and
Canada.
®
The RBRC program provides a
convenient alternative to placing used
nickel metal hydride batteries into the
trash or municipal waste, which may be
illegal in your area.
Philips’ participation in RBRC makes it
easy for you to drop off the spent battery
at local retailers participating in the
5. Philips plays an active role in the
development of international EMF
and safety standards, enabling Philips
to anticipate further developments
in standardization for early
®
®
RBRC program or at authorized Philips
integration into its products.
product service centers.
Please call 1-800-8-BATTERY for
information on NiMH battery recycling
and disposal bans/restrictions in your
area. Philips’ involvement in this program
®
The RBRC seal
7
Download from Www.Somanuals.com. All Manuals Search And Download.
01GB01COV.book Page 8 Wednesday, November 19, 2008 5:04 PM
is part of its commitment to protecting
our environment and conserving natural
resources.
®
RBRC is a registered trademark of
Rechargeable Battery Recycling
Corporation.
3.1
Service Centers
US service center
Philips Accessories & Computer
Peripherals North America1881 Route
46 West Edgewood, NJ 07852
Phone: (800) 233-8413
E-mail support:
®
The RBRC seal
8
Download from Www.Somanuals.com. All Manuals Search And Download.
01GB01COV.book Page 9 Wednesday, November 19, 2008 5:04 PM
®
The RBRC seal
9
Download from Www.Somanuals.com. All Manuals Search And Download.
01GB01COV.book Page 10 Wednesday, November 19, 2008 5:04 PM
4
Your phone
Congratulations on your purchase and welcome to Philips!
This manual only explains part of the functions of your handset. For details on other
functions, refer to the manual provided with the base station.
To fully benefit from the support that Philips offers, register your product at
4.1
What’s in the box
Handset with belt clip
Charger
Battery door
User manual
2 AAA rechargeable
batteries
Power supply
Guarantee
Do not return leaflet
Quick Start Guide
Your phone
10
Download from Www.Somanuals.com. All Manuals Search And Download.
01GB04C02.fm Page 11 Thursday, November 20, 2008 2:08 PM
4.2
Overview of your handset
C
Display
See section 4.3 for an overview of the
display icons.
A
B
D
Select key o
In a menu, selects the function displayed
on the screen or goes to the next lower
level. Also used to confirm entries (for
example, when setting date and time).
E
Back/Clear key c
C
When making an entry, press to clear
(delete) a character or number, or long
press to clear all.
When navigating menus, press to move
to the previous higher menu level (Back
is displayed).
D
E
F
G
H
F
Navigation keys n
In idle mode: Scroll up u to access the
Call log and scroll down d to access
the Phonebook.
During a call: Scroll n to increase or
decrease earpiece and speaker volume.
Editing and entry: Move to the previous
character u or next character d.
In other modes: Scroll up u and down
d a menu list or go to the previous
or next record in the Phonebook, Redial
list, or Call log.
G
Talk key t
A
Event LED
In idle mode: Make or answer an external
call or answer an incoming internal call.
During a call: Activate the flash function.
In other modes: Dial the selected
number in the Phonebook, Redial list, or
Call log.
The event LED on your handset blinks
when there is a new message recorded
on your telephone answering machine. If
you have subscribed to Caller Line
Identification, the event LED also blinks
when there is a new call, or a new voice
mail message.
H
Hang-up/Exit key h
In idle mode: Long press (5 seconds) to
switch off the handset.
B
Earpiece
When the handset is switched off: Long
press (1 second) to switch it on.
Your phone
11
Download from Www.Somanuals.com. All Manuals Search And Download.
01GB04C02.fm Page 12 Thursday, November 20, 2008 1:39 PM
During a call: Hang up a call.
In other modes: Press to return to idle
mode.
R
S
I
Menu key m
In idle mode: Go to the main menu.
Redial key r
Access the Redial list in idle mode.
Loudspeaker key l
J
T
K
I
In idle mode: Turn on the loudspeaker
and dial the number. Answer an incoming
call using handsfree mode.
J
K
L
U
During a call: Toggle the loudspeaker on/
off.
M
N
O
L
Number keys
P
Q
Use to dial numbers and write
characters.
Refer to the manual provided with the
base station for the functions of keys 1
and 2.
O
Mute key s
When off hook: Deactivate/activate the
microphone.
When using keys 3 to 9, a long press
dials one of your direct memory access
numbers.
P
Call transfer key & Intercom
key i
In idle mode: Initiate an internal call.
M
*/Keypad lock & Format key * During a call: Short press to hold the line
In idle mode: Long press to lock/ unlock
keypad.
and page another handset. Long press to
set up a conference between an external
Predialing or editing: Press to enter a “*”. call and two handsets.
Off hook: Long press to temporarily
switch to tone (DTMF) dialing if using
pulse.
During call log display: Toggles area code
and long distance display on/off.
Q
R
S
Microphone
Belt clip
Loudspeaker (underneath the
belt clip)
Warning
N
#/Ringer on/off & Pause key #
Handsfree activation can suddenly
increase the volume of the earpiece to a
very high level. Make sure the handset is
not too close to your ear.
In idle mode: Long press to turn the
ringer on/off.
Dialing or editing: Long press to insert a
pause (during predialing) and short press
to insert a “#”.
T
Headset jack
Battery door
U
Editing: Short press to switch upper/
lower case.
Your phone
12
Download from Www.Somanuals.com. All Manuals Search And Download.
01GB01COV.book Page 13 Wednesday, November 19, 2008 5:04 PM
4.3
Display icons and Messages
Indicates that the battery is fully
charged. This icon blinks during
charge and when the battery is
low.
When the Icon is empty the
battery is practically discharged.
Note
If Warning Batt flashes together
with a blinking battery icon,
batteries of the wrong type are
installed in the handset. Replace
with batteries of the correct type.
Blinks when there is an incoming
call. Steady On during a call.
If you subscribe to voice mail
service, blinks when there is
new voice mail.
Steady on when the answering
machine is on. Blinks when
messages have been received by
the answering machine; blinks
rapidly when the answering
machine memory is full.
Indicates that the handset is
registered and within range of
the base station. Blinks when
the handset is out of range or is
searching for a base.
Select/ Select appears when in menu
mode. Press the key directly
below to move to the next menu
level or to confirm a selection.
OK appears to request
confirmation of an operation.
Press the key directly below to
confirm.
Indicates that more options are
available in a scroll list, or that
you can adjust the volume.
OK
Blinks when there are new and
missed calls in the call log
records.
Appears when the alarm clock
is activated. Blinks when the
alarm time comes.
Back/ Back appears when in menu
mode. Press the key directly
below to return to the previous
menu level.
Clear
Appears when the loudspeaker
is activated.
Clear appears when making an
entry. Press the key directly
below to clear (delete) a
character or number when
making an entry. Long press to
clear all.
Appears when the ringer is off.
Your phone
13
Download from Www.Somanuals.com. All Manuals Search And Download.
01GB04C02.fm Page 14 Thursday, November 20, 2008 1:50 PM
The power adaptor must be connected
correctly, as incorrect connection could
damage the unit.
5
Getting started
Be sure to charge the handset for at least
24 hours before using it for the first time.
5.2
Install the batteries
Warning
Always use the AAA rechargeable
batteries supplied with your handset. If
alkaline batteries are used instead of
rechargeable batteries, “Warning Batt”
will show on the display and the battery
icon will blink quickly.
5.1
1
Connect the charger
Place the charger near a power
outlet.
Connect the power cable to the
connector on the charger.
2
1
Slide out the battery cover.
2
Place the batteries in the correct
polarity as indicated and replace the
cover.
3
Connect the other end of the
power cable to the power outlet.
Warning
Power is applied when the power
adaptor is plugged into the charger and
connected to the power outlet. The only
way to power down the charger is to
unplug the power adaptor from the
power outlet. Therefore, ensure that the
power outlet is easily accessible.
5.3
Charge the batteries
Warning
The handset must be charged for at least
24 hours before using it for the first time.
When the battery level becomes low, the
low battery sensor warns you by blinking
the battery icon. If this occurs during a
conversation, an alert tone sounds to
Getting started
14
Download from Www.Somanuals.com. All Manuals Search And Download.
01GB04C02.fm Page 15 Thursday, November 20, 2008 1:50 PM
inform you that the battery is low. If the
battery level becomes exceedingly low,
the phone automatically switches off
shortly after the icon starts blinking and
any function in progress will not be
saved.
2
To attach the belt clip to your
handset, fit the tabs on the belt clip
into the slots at the back of the
handset and push into place.
1
Place the handset in the cradle of
the charger with the display facing
forward. A beep is emitted if the
handset is placed correctly.
2
3
The battery icon
blinks during charging.
The battery icon
on the display
5.5
Install optional headset
becomes
Your handset may be used with an
steady when the handset is fully
charged.
Note
optional headset (not included in the box).
To use this feature, insert the headset plug
into the headset jack. Your handset is
ready for hands-free conversations.
Optimal battery life is reached after 3
cycles of complete charging (over 15
hours) and discharging, allowing
approximately 12 hours of talk-time and
150 hours of stand-by time.
Diameter: 2.5 mm
The indoor and outdoor ranges of the
handset are up to 50 meters and 300
meters, respectively. When the handset
moves beyond the operation range, the
antenna icon
will blink.
Tip
When you reach the range limit the
conversation may become crackly. Move
closer to the base.
6
Registration
5.4
Remove/Attach belt clip
6.1
Registering the handset
A belt clip allows you to carry your
handset on your belt.
You must register your handset to the
base station before you can use it. Up to
8 handsets can be registered to one base
station.
1
To remove the belt clip, simply pull
the clip away from the handset.
The PIN is required before you can
register or unregister handsets.
By default, the PIN is 0000.
Registration
15
Download from Www.Somanuals.com. All Manuals Search And Download.
01GB01COV.book Page 16 Wednesday, November 19, 2008 5:04 PM
6.1.1 Easy registration
6.2
Checking the signal strength
1
Insert the unregistered handset into
the base station to automatically
begin registration.
Registering… is displayed on the
screen.
When you power on the registered
handset, the display will show the word
“Searching” and the Antenna icon
flashes until the handset locks onto its
subscribed base. Then the display shows
the standby display.
2
•
Upon successful registration, a
validation tone is emitted and the
handset number (1 to 8) will be
assigned by the base
automatically.
7
Using the Handset
6.1.2 Manual registration
1
Power on the handset.
2
On the base station, press and hold
a for 3 seconds. A beep sounds to
indicate that the base station is
ready to accept registration. (No
beep sounds on the SE650.)
Note
7.1
Make a call
7.1.1 Predialing
Enter the number (maximum 24 digits)
and then press t or l.
If no action is taken on the handset
within 90 seconds, the registration
procedure will be aborted. If this
happens, repeat from Step 1.
7.1.2 Direct dialing
Press t or l and then dial the
number.
3
On the handset, press m, scroll n
to Advanced Set and press o
Select.
7.2
Answer a call
4
5
Scroll n to Register and press
o Select.
Enter the PIN when prompted and
press o OK to confirm.
Registering… is displayed on the
screen.
When the phone rings, press t or l.
7.3
End a call
To end a conversation, press h.
•
Upon successful registration, a
validation tone is emitted and the
handset number (1 to 8) is
assigned by the base station
automatically.
Using the Handset
16
Download from Www.Somanuals.com. All Manuals Search And Download.
01GB01COV.book Page 17 Wednesday, November 19, 2008 5:04 PM
to answer on the base station when
using the SE658 base station).
Note
8
Using the Intercom
and Conference
Calling
Pressing h on any handset (or l on
the base station when using the SE658
base station) will exit intercom mode and
return other units to idle mode. If an
external call arrives during intercom
mode and you want to accept this call,
you must first exit intercom mode.
8.1
Using the Intercom
The intercom feature allows you to make
free internal calls, transfer external calls
from one handset to another and use the
conference option. With the SE658, you
can also make internal calls or
8.1.2 Transfer an external call to
another unit
1
During the call, press i to put the
external call on hold (the caller can
no longer hear you).
conference between the handset and the
base station.
•
The display shows the numbers
of the handsets registered to the
base (and the base as well, when
used with the SE658 base
station).
8.1.1 Intercom another unit
1
Press i in idle mode.
•
Intercom is established
immediately:
2
3
Select n to the unit you wish to
transfer your external call to and
press o Select.
Press t on the called unit to
answer the internal call, where both
internal callers can talk.
If there is only one handset
registered to the SE658 base
station;
If there are only two handsets
registered to the SE650/655 base
station.
•
Intercom is established.
2
If there is more than one (with the
SE658) or two (with the SE650/655)
registered handset(s), scroll n to
select the unit to call and press o
Select.
4
Press h on the first unit to
transfer the external call to the
called handset.
•
The external call is transferred.
Note
•
Once the intercom call is
initiated the icon is displayed
on the handset.
If there is no answer from the called unit,
press i to resume the external call.
3
Press t to answer an intercom
call on the called handset (or l
Using the Intercom and Conference Calling
17
Download from Www.Somanuals.com. All Manuals Search And Download.
01GB05C05.fm Page 18 Thursday, November 20, 2008 1:53 PM
8.1.3 Answer an external call
during intercom
3
4
Press t on the called handset (or
l if the base station is called
when using the SE658 base station)
to answer the internal call, where
both internal callers can talk.
1
During intercom, a new call tone is
emitted when there is an incoming
external call.
2
3
Press h to exit intercom mode.
Press t to pick up the external
call.
•
Intercom is established.
Press c Conf. soft key or long
press i on the first unit to start
the three party conference.
•
Conference will be displayed on
the screen once the conference
call is established.
8.1.4 Switch between an internal
and external call
During the call, press i to switch
between an internal or external call.
8.2
Conference calling
The conference call feature allows an
external call to be shared with two
handsets (when used with the SE650/
655/658 base station), one handset and
the base (when used with the SE658 base
station). The three parties can share the
conversation and no network
subscription is required.
8.2.1 Establish a three-party
conference call
1
During the call, press i to put the
external call on hold (the caller can
no longer hear you).
•
The display shows the numbers
of available handsets (and the
base station when used with the
SE658 base station).
2
Scroll n to the number of the unit
you wish to establish the conference
call with and press o Select.
Using the Intercom and Conference Calling
18
Download from Www.Somanuals.com. All Manuals Search And Download.
01GB01COV.book Page 19 Wednesday, November 19, 2008 5:04 PM
1
2
3
4
Press m in idle mode, scroll n to
Personal Set, and press o
Select.
Scroll n to Handset Tones and
press o Select. Ring Volume is
highlighted. Press o Select.
Scroll n to your desired volume
level. The ring tone sounds at each
level.
9
Personal settings
9.1
Change the Handset Name
You can name the handset and display the
handset name in idle mode. The default
handset name is Philips.
1
Press m in idle mode, scroll n to
Personal Set and press o
Select.
Handset Name is highlighted.
Press o Select.
The last stored name is displayed.
Press c Clear to delete the
characters one by one or a long
press to delete all.
Enter the new name and press o
OK to confirm.
Press o OK to confirm.
•
A validation tone is emitted and
the screen returns to the
Handset Tones menu.
2
3
Note
If ring volume is set to off, the
will be displayed on the screen. If ring
volume is set to progressive, the ringer
will start at level 1 and go up one level
volume every ring.
icon
4
•
A validation tone is emitted and
the screen returns to the
Personal Set menu.
9.2.2 Set the Ring Tones
There are 15 ring tones available on your
handset.
1
2
3
4
Press m in idle mode, scroll n to
Personal Set, and press o
Select.
Scroll n to Handset Tones and
press o Select. Then scroll n to
Ring Tones and press o Select.
Scroll n to your desired melody.
The melodies will play as you scroll
them.
9.2
Handset Tones
9.2.1 Set the Ring Volume
Danger
When the handset rings during an
incoming call, please do not hold the
handset too close to your ear as the
volume of the ringing tone may damage
your hearing.
Press o Select to set the ring
tone.
There are 5 ringer volume levels plus
progressive and off. The default is level 3.
•
A validation tone is emitted and
the screen returns to the
Handset Tones menu.
Personal settings
19
Download from Www.Somanuals.com. All Manuals Search And Download.
01GB01COV.book Page 20 Wednesday, November 19, 2008 5:04 PM
9.2.3 Activate/Deactivate Key
Beep
A single beep tone is emitted when a key
is pressed. You can enable or disable the
key beep.
9.4
Select the Display Wallpaper
There are 3 wallpaper images available on
your handset as well as an option to set it
off.
1
Press m in idle mode, scroll n to
Personal Set, and press o
Select.
Scroll n to Wallpaper and press
o Select.
Scroll n to your desired wallpaper.
The image on the display will change
as you scroll.
1
2
3
Press m in idle mode, scroll n to
Personal Set, and press o
Select.
Scroll n to Handset Tones and
press o Select. Then scroll n to
Key Beep and press o Select.
Scroll n to select On or Off and
press o Select to confirm.
2
3
4
Press o Select to confirm.
•
A validation tone is emitted and
the screen returns to the
Handset Tones menu.
•
A validation tone is emitted and
the screen returns to the
Personal Set menu.
9.3
Change the Display Language
9.5
Select the Color Theme
Your handset can support different
display languages.
There are 4 color themes available on
your handset.
1
Press m in idle mode, scroll n to
Personal Set, and press o
Select.
1
Press m in idle mode, scroll n to
Personal Set, and press o
Select.
2
3
Scroll n to Language and press
o Select.
Scroll n to your desired language
and press o Select to confirm.
2
3
Scroll n to Color Theme and
press o Select.
Scroll n to your desired color
theme. The color theme used on
the display will change as you scroll.
Press o Select to confirm.
•
A validation tone is emitted and
the screen returns to the
Personal Set menu.
4
•
A validation tone is emitted and
the screen returns to the
Personal Set menu.
Note
Once the display language is set, the
option menus on the handset will
immediately switch to display in the
selected language.
Personal settings
20
Download from Www.Somanuals.com. All Manuals Search And Download.
01GB01COV.book Page 21 Wednesday, November 19, 2008 5:04 PM
9.6
Set the Display Contrast
If Auto Hang-up is set to Off, putting the
handset back on the cradle while in talk
mode will switch the handset to hands
free talk mode. This allows you to charge
the handset during calls.
You can change the contrast of the text
on the display. There are 5 contrast levels
available. The default is level 3.
1
Press m in idle mode, scroll n to
Personal Set, and press o
Select.
The default setting for Auto Hang-up is
On.
2
3
Scroll n to Contrast and press
o Select.
Scroll n to the desired display
contrast, and press o Select to
confirm.
1
Press m in idle mode, scroll n to
Personal Set, and press o
Select.
Scroll n to Auto Hang-up and
press o Select.
2
3
•
A validation tone is emitted and
the screen returns to the
Personal Set menu.
Scroll n to On or Off and press
o Select to confirm.
•
A validation tone is emitted and
the screen returns to the
Personal Set menu.
9.7
Set the Backlight Time
You can change the backlight timing for
the display. There are 3 options available:
20, 40, or 60 seconds.
1
Press m in idle mode, scroll n to
Personal Set, and press o
Select.
2
3
Scroll n to Backlight Time and
press o Select.
Scroll n to the desired backlight
time, and press o Select to
confirm.
•
A validation tone is emitted and
the screen returns to the
Personal Set menu.
9.8
Deactivate/Activate Auto
Hang-Up
If Auto Hang-up is set to On, it will
automatically release the line when the
phone is put back on the cradle.
Personal settings
21
Download from Www.Somanuals.com. All Manuals Search And Download.
01GB01COV.book Page 22 Wednesday, November 19, 2008 5:04 PM
•
Wideband synthesis for receiver and
loudspeaker
10 Advanced settings
Phonebook list, Redial list and Call
log
10.1 Registration
Please refer to section 6.1 on how to
register the handset.
•
•
•
Phonebook list with 200 entries
Redial list with 10 entries
Call log with 50 entries
Battery
10.2 Unregister
•
2 × AAA, 600mAh batteries
1
Press m in idle mode, scroll n to
Advanced Set and press o
Select.
Radio specifications
•
•
Frequency Band: 1920 - 1930Mhz
Maximum output power: 120mW
2
3
4
Scroll n to Unregister and press
o Select.
Enter the PIN when prompted and
press o OK to confirm.
Scroll n to select the handset
number to unregister and press o
Select. Press o Select again to
confirm.
Weight and dimensions
Handset:
•
•
128.5 grams
160mm × 28mm × 46mm
(H × D × W)
Charger:
•
A validation tone is emitted to
indicate successful unregistration.
•
•
77 grams
69mm × 96mm × 82mm
(H × D × W)
Temperature range
•
Operation: Between 0 and 35ºC
(32 to 95ºF).
11 Technical data
•
Storage: Between -20 and 70ºC
(-4 to 158ºF).
Display
•
•
•
Color LCD with backlight
Selectable wallpaper
Selectable color theme
Relative humidity
•
•
Operation: Up to 95% at 40°C
Storage: Up to 95% at 40°C
General telephone features
•
•
Caller name & number identification
5 standard + 10 polyphonic ringer
melodies
Advanced settings / Technical data
22
Download from Www.Somanuals.com. All Manuals Search And Download.
01GB01COV.book Page 23 Wednesday, November 19, 2008 5:04 PM
12 INDEX
A
M
Activate/Deactivate Key Beep 20
Advanced settings 22
Answer a call 16
Make a call 16
Manual registration 16
Answer an external call during
intercom 18
O
Overview of your handset 11
C
P
Change the Display Language 20
Change the Handset Name 19
Charge the batteries 14
Checking the signal strength 16
Conference calling 18
Connect the charger 14
Personal settings 19
Power requirements 6
Predialing 16
R
Registering the handset 15
Registration 15
D
Remove/Attach belt clip 15
Deactivate/Activate Auto Hang-Up 21
Direct dialing 16
S
Display icons and Messages 13
Select the Color Theme 20
Select the Display Wallpaper 20
Set the Backlight Time 21
Set the Display Contrast 21
Set the Ring Tones 19
E
Easy registration 16
End a call 16
Establish a three-party conference call 18 Set the Ring Volume 19
Switch between an internal and external
call 18
G
Getting started 14
T
H
Technical data 22
Handset Tones 19
Transfer an external call to another
unit 17
I
Install optional headset 15
Install the batteries 14
Intercom another unit 17
U
Unregister 22
Using the Handset 16
INDEX
23
Download from Www.Somanuals.com. All Manuals Search And Download.
01GB01COV.book Page 24 Wednesday, November 19, 2008 5:04 PM
Using the Intercom 17
W
What’s in the box 10
Y
Your phone 10
INDEX
24
Download from Www.Somanuals.com. All Manuals Search And Download.
01GB01COV.book Page 27 Wednesday, November 19, 2008 5:04 PM
UUZZ21693ZZ(0)
Download from Www.Somanuals.com. All Manuals Search And Download.
01GB07BCO.fm Page 28 Thursday, November 20, 2008 11:15 AM
©2008 Koninklijke Philips Electronics N.V.
All rights reserved
Reproduction in whole or in part is prohibited without the
written consent of the copyright owner
Document order number: 3111 285 49871 (US-EN)
Download from Www.Somanuals.com. All Manuals Search And Download.
|