Philips Computer Monitor BDS4222B User Manual
Philips  
Business  
Solutions  
EN  
User Manual  
TYPE Nr.  
BDS4222B  
BDS4222V  
BDS4222R  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Manual BDS4222B/V/R  
TABLE OF CONTENTS  
1
IMPORTANT NOTES AND SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
1.1  
1.2  
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Warnings and Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
1.2.1 Note to the CATV System Installer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Cleaning & Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
End-Of-Life Disposal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
1.3  
1.4  
2
3
REGULAROTY NOTICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
UNPACKING AND INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
3.1  
3.2  
3.3  
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Installation Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
4
5
PARTS AND FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
4.1  
4.2  
4.3  
4.4  
Available Functionality by Monitor Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Front View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Rear View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
CONNECTIONS TO EXTERNAL EQUIPMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
5.1  
5.2  
5.3  
5.4  
5.5  
Connecting TV or CATV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Connecting a VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Connecting a DVD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
External Audio Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Connecting a PC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
6
BASIC FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21  
6.1  
6.2  
6.3  
6.4  
6.5  
6.6  
Powering ON / OFF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Selecting Signal Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
On-screen Display menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
On-Screen Display Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Understanding Widescreen Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
6.6.1 4:3 (Square) Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
6.6.2 Widescreen Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Changing Aspect Ratios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
6.7  
7
ADVANCED FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27  
7.1  
Picture Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
7.1.1 Adjusting Picture Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
7.1.2 Picture-In-Picture (PIP) / Side-by-Side Picture (POP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
7.1.3 Selecting Color Temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
7.1.4 Fine Tuning RGB(VGA) Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
7.1.5 Fit Picture To Size Of Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Sound Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
7.2.1 Adjusting Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
7.2.2 Built-in Amplification (Speaker) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
7.2.3 Fixed / Variable Audio Output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
OSD Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Power Save Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Information Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
Pixel Shift Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
Burn-in Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
7.2  
7.3  
7.4  
7.5  
7.6  
7.7  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Manual BDS4222B/V/R  
7.8  
7.9  
Teletext. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
TV Functions (BDS4222R only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
7.9.1 Initial Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
7.9.2 Manual Channel Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
7.9.3 Channel Edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
7.10 On-Screen Status Display (TV Mode) (BDS4222R only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
7.10.1 Changing Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
7.10.2 Sound Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44  
8
9
TECHNICAL SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45  
8.1  
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45  
CLEANING AND TROUBLESHOOTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49  
9.1  
9.2  
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50  
10  
11  
LIMITED WARRANTY (EUR). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51  
LIMITED WARRANTY (USA). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Manual BDS4222B/V/R  
1. IMPORTANT NOTES AND SAFETY INSTRUCTIONS  
1.1  
■
SAFETY INSTRUCTIONS  
Read and keep these instructions.  
■
Heed all warnings.  
■
Follow all instructions.  
■
Do not use this apparatus near water.  
■
Disconnect from the electric outlet before cleaning. Do not use  
liquid or aerosol cleaners. Clean only with a slightly damp cloth.  
■
■
Do not block any of the ventilation openings. Install in accordance  
with the manufacturers instructions.  
Do not install in direct sunlight, near any heat sources such as  
radiators, heat registers, stoves, or other apparatus (including  
amplifiers) that produce heat.  
■
Do not defeat the safety purpose of the polarized or grounding type  
plug. A polarized plug has two blades with one wider than the other.  
A grounding type plug has two blades and a third grounding prong.  
The wide blade or third prong are provided for your safety. When  
the provided plug does not fit into your outlet, consult an electrician  
for replacement of the obsolete outlet.  
■
■
■
Do not remove cover, to prevent electric shock. Refer servicing to  
qualified service personel only.  
Unauthorized modification of this equipment or usage of an  
unshielded connecting cable may cause excessive interference.  
Adjust only those controls that are covered by the operating  
instructions. Improper adjustment of other controls can result in  
damage which often requires extensive work by a qualified technician  
to restore the unit to normal operation.  
■
■
Use in well-ventilated area and do not block any of the ventilation  
openings. Install in accordance with the manufacturer’s instructions.  
The unit must be operated from the type of power source indicated  
on the label. If the type of available power is unknown, consult your  
dealer or local power company.  
■
Protect the power cord from being walked on or pinched  
particularly at plugs, convenience receptacles, and the point where  
they exit from the apparatus power outlet. This is a safety feature.  
If you are unable to insert the plug into the outlet, contact your  
electrician. Do not alter the plug; this will defeat the safety feature.  
■
■
Do not overload wall outlets and extension cords as this can result  
in a risk of fire or electric shock.  
If the picture displayed looks abnormal, turn off the unit and  
disconnect it from the electric outlet. Verify your signal wire  
connections and reconnect the display to the electric outlet.  
■
Only use attachments/accessories specified by the manufacturer.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
User Manual BDS4222B/V/R  
■
Use only with a cart, stand, tripod, bracket, or table specified by the  
manufacturer, or sold with apparatus. When a cart is used, use  
caution when moving the cart/apparatus combination to avoid injury  
from tip-over.  
■
■
Unplug this apparatus during lightning storms or when unused for  
long periods of time.  
Refer all servicing to qualified service personnel. Servicing is required  
when the apparatus has been damaged in any way, such as  
power-supply cord or plug is damaged, liquid has been spilled or  
objects have fallen into apparatus, the apparatus has been exposed to  
rain or moisture, does not operate normally, or has been dropped.  
■
■
This product may contain lead and mercury. Disposal of these  
materials may be regulated due to environmental considerations.  
For disposal or recycling information, please contact your local  
authorities or the Electronic Industries Alliance: www.eiae.org  
Damage Requiring Service:  
The appliance should be serviced by qualified service personnel  
when:  
●
●
●
●
The power supply cord or the plug has been damaged or frayed.  
Objects have fallen, or liquid has been spilled into the appliance.  
The appliance has been exposed to rain.  
The appliance does not appear to operate normally or exhibits a  
marked change in perfomance.  
●
●
The appliance has been dropped, or the enclosure damaged.  
Unit does not operate normally when the operating instructions  
are followed.  
■
Tilt/Stability:  
●
●
●
●
All displays must comply with recommended international global  
safety standards for tilt and stability properties of its cabinet  
design.  
Do not compromise these design standards by applying excessive  
pull force to the front, or top, of the cabinet which could  
ultimately overturn the product.  
Do not endanger yourself, or children, by placing electronic  
equipment/toys on the top of the set and cause product damage  
and/or personal injury.  
Do not place the unit on an unstable cart, stand or table. Or the  
product may fall, causing serious damage.  
■
■
Do not place the unit on a bed, soffa, rug, or similar surfaces.  
Wall or Ceiling Mounting:  
The appliance should be mounted to a wall or ceiling only as  
recommended by the manufacturer.  
■
Power Lines:  
An outdoor antenna should be located away from power lines.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Manual BDS4222B/V/R  
■
Outdoor Antenna Grounding:  
●
If an outside antenna is connected to the receiver, be sure the  
antenna system is grounded so as to provide some protection  
against voltage surges and built up static charges.  
●
Section 810 of the National Electric Code, ANSI/NFPA  
No. 70-1984, provides information with respect to proper  
grounding of the mast and supporting structure, grounding of the  
lead-in wire to an antenna discharge unit, size of grounding  
connectors, location of antenna-discharge unit, connection  
grounding electrodes, and requirements for the grounding  
electrode.  
■
■
Object and Liquid Entry:  
Care should be taken so that objects do not fall and liquids are not  
spilled into the enclosure through openings.  
Battery Usage:  
CAUTION: To prevent battery leakage that may result in bodily  
injury, property damage, or damage to the unit.  
●
Install all batteries correctly, with + and - aligned as marked on  
the unit.  
●
●
Do not mix batteries (old and new or carbon and alkaline, etc.).  
Remove batteries when the unit is not used for a long time.  
1.2  
WARNINGS AND PRECAUTIONS  
1.2.1 NOTE TO THE CATV SYSTEM INSTALLER  
This reminder is provided to call the CATV system installer’s attention  
to Article 820-40 of the NEC that provides guidelines for proper  
grounding and, in particular, specifies that the cable ground must be  
connected to the grounding system of the building, as close to the point  
of cable entry as practical.  
KNOW THESE SAFETY SYMBOLS  
C A U T I O N  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
CAUTION: TO REDUCE THE RISK OF ELECTRIC  
SHOCK, DO NOT REMOVE COVER (OR BACK). NO  
USER SERVICEABLE PARTS INSIDE. REFER SER-  
VICING TO QUALIFIED SERVICE PERSONEL.  
a
■
This lightning flash with arrow-head within a triangle indicates  
uninsulated material within your unit, which can cause an electric  
shock. For the safety of everyone in your household, do not remove  
product cover.  
■
For the safety of everyone in your household, do not remove  
product cover. The exclamation point within a triangle calls  
attention to features for which you mustread the enclosed literature  
closely to prevent operating and maintenance problems.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
User Manual BDS4222B/V/R  
WARNING  
To reduce the risk of fire or electric shock, this appliance must not be  
exposed to rain or moisture, and objects filled with liquids, such as  
vases, must not be placed upon this apparatus.  
CAUTION  
To prevent electric shock, match wide plug blade to wide slot, and fully  
insert.  
ATTENTION  
Pour éviter les chocs électriques, introduire la lame la plus large de la  
fiche dans la bome correspondante de la prise et pousser jusqu’au fond.  
1.3  
CLEANING & CARE  
■
To avoid possible shock hazard, please be sure that the television is  
unplugged from the electrical outlet before cleaning.  
■
When cleaning the television screen, take care not to scratch or  
damage the screen surface (avoid wearing jewelry or using anything  
abrasive).  
■
■
Wipe the front of the screen with a clean cloth dampened with  
water. Use even, easy, vertical strokes when cleaning.  
Gently wipe the cabinet surfaces with a clean cloth or sponge  
dampened in a solution of cool clear water. Use a clean dry cloth to  
dry the wiped surfaces.  
■
■
Occasionally vacuum the ventilation holes or slots in the cabinet  
back.  
Never use thinners, insecticide sprays, or other chemicals on or near  
the cabinet, as they might cause permanent marring of the cabinet  
finish.  
■
Do not allow a still image to be displayed for an extended period of  
time as this can cause a permanent after-image to remain.  
1.4  
END-OF-LIFE DISPOSAL  
■
This Philips product and its packaging contain materials that can be  
recycled and re-used. Specialized companies can recycle your  
product to increase the amount of reusable materials and minimize  
the amounts which need to be properly disposed.  
■
■
This product might also use batteries, which should not be thrown  
away when depleted, but should be handed in and disposed of as  
small chemical waste.  
Please find out about the local regulations regarding the disposal of  
the television, batteries, and packaging materials whenever you  
replace existing equipment.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
User Manual BDS4222B/V/R  
2. REGULAROTY NOTICE  
FCC Compliance Statement  
The equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to part 15 of FCC rules. These limits are  
designed to provide reasonable protection against harmful interference  
when the equipment is operated in a commercial environment.  
This equipment generates, uses, and can radiate radio frequency energy  
and, if not installed and used in strict accordance with the instruction  
manual, may cause harmful interference to radio communications.  
There is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio  
or television reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
■
■
■
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and the receiver.  
Connect the equipment into an outlet on a circuit different from that  
to which the receiver is connected.  
■
Consult the dealer or an experienced radio/TV technician for help.  
Operation of this equipment in a residential area is likely to cause  
harmful interference in which case the user will be required to correct  
the interference at the user's own expense.  
Shielded interconnected cables and shield power cords must be  
employed with this equipment to insure compliance with the pertinent  
RF emission limits governing this device.  
Changes or modifications not expressly approved by the manufacturer  
could void the user's authority to operate the equipment and invalidate  
the warranty.  
Canadian Compliance Statement  
This Class B digital apparatus meets all requirements of the Canadian  
Interference Causing Equipment Regulations.  
Cet appareil numérique de la Classe B respecte toutes les exigences du  
Règlement sur le materiel brouilleur du Canada.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
User Manual BDS4222B/V/R  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Manual BDS4222B/V/R  
3. UNPACKING AND INSTALLATION  
3.1  
UNPACKING  
■
The monitor is packed in a carton, together with the standard  
accessories. Any other optional accessories will be packed  
separately.  
■
■
The weight of the monitor is approx 36kg. Due to the size and  
weight it is recommended to move it by 2 people.  
The protective glass and the glass substrate are installed on the front  
of the product. Since both glass can be broken and scraped easily the  
product has to be handled with care. Never place the monitor with  
the glass faced down unless it is protected with pads.  
■
■
After opening the carton ensure that the content is in good  
condition and complete.  
When possible use the handles on the back of the monitor for  
transport.  
3.2  
PACKAGE CONTENTS  
Please verify that you received the following items with your package  
content:  
1
2
3
4
5
Monitor  
Remote Control  
CD-ROM with User Manual  
Power Cable  
Batteries  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
User Manual BDS4222B/V/R  
3.3  
INSTALLATION NOTES  
■
Due to the high power consumption, always use the plug exclusively  
designed for this product. If an extended line is required, please  
consult your service agent.  
■
The product should be installed on a flat surface to avoid tipping.The  
distance between the back of the product and the wall should be  
maintained for proper ventilation. Avoid installing the product in the  
kitchen, bathroom or any other places with high humidity so as not  
to shorten the service life of the electronic components.  
■
■
Please ensure the product is installed horizontally. Any 90 degrees  
clockwise or counter-clockwise installation may induce poor  
ventilation and subsequent component damage.  
To protect the screen and avoid screen damage, do not display a still  
picture for a long time.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
User Manual BDS4222B/V/R  
4. PARTS AND FUNCTIONS  
4.1  
AVAILABLE FUNCTIONALITY BY MONITOR  
TYPE  
Connection options vary according to monitor type. The functionality of  
each monitor type is shown in the table below.  
BASIC FUNCTIONALITY  
VIDEO FUNCTIONALITY  
TV  
MONITOR  
TYPE Nr.  
VGA/DVI  
Audio In  
SCART  
(AV)  
Component  
Video-Audio In  
AntennaJack  
+ TV Tuner  
VGA  
3
DVI  
3
S-Video  
-
BDS4222B  
BDS4222V  
BDS4222R  
-
-
-
-
3
3
3
3
3
3
3
3
3
3
3
3
3
3
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
User Manual BDS4222B/V/R  
4.2  
FRONT VIEW  
POWER  
VOL.  
2
3
VOL.  
SEL.  
SEL.  
4
MENU  
INPUT  
5
6
1
1. Status LED  
●
Not Illumated = No AC Power detected  
If the main power switch (rear of panel) is turned off, this LED  
will not illuminate.  
●
Orange = Standby (Power OFF) with AC power  
detected  
The LED will illuminate in orange color if the monitor is shut off  
but the main power cord is plugged into the back of the unit.  
●
Solid Green = Power ON  
2. Power (Standby) Button  
Turns power on/off from standby mode. There is a wait period  
between on/off cycles.  
3. Volume Adjustment Buttons  
Use these buttons to adjust volume up and down. These keys also  
serve as navigation and adjustment keys when On Screen Display  
menu is engaged.  
4. Select Buttons  
Use these buttons to navigate through the the On Screen Display  
menu. If an optional TV tuner is installed, these buttons also function  
as Channel Up/Down.  
5. Menu Button  
Use this button to engage the On Screen Display menu.  
6. Input Button  
Use this button to switch between available inputs.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
User Manual BDS4222B/V/R  
4.3  
REAR VIEW  
Video Connectors  
4
9
1
2
3
C
OMPO  
N
E
N
T VI  
D
EO/AUDIO I  
R
N
AUDIO  
O
UT  
ANT  
Y
PB  
/ CB  
PR  
/ CR  
L
L
Subwoofer  
SCART INPUT  
SCART INPUT  
DVI/  
S-VIDEO  
R
EO I  
L
R
R
G
B
L
N
R
VID  
N
AUDIO I  
RGB/Computer Related Connector  
DVI IN  
RGB IN  
RGB OUT  
RS-232  
5
6
7
8
1. S-Video Inputs (BDS4222V & BDS4222R only)  
Connect S-Video signals from external sources such as VCRs or  
DVD players.  
2. Component Video Inputs (BDS4222V & BDS4222R only)  
Auto-detecting component video inputs (Y/Pb/Pr or Y/Cb/Cr) for  
connecting to the component output jacks of a DVD player or  
Set-Top Box.  
3. Audio Output  
Variable or fixed audio output jacks for connecting to an external  
audio amplifier.  
4. Antenna Jack (BDS4222R only)  
Connect to TV or CATV antenna.  
5. Digital DVI Input  
Connect to digital video signals from a Set-Top box or Computer.  
6. RGB(VGA) Input  
Connect to RGB(VGA) output of Computer or Set-Top box.  
7. RGB(VGA) Output  
Connect to another computer monitor for daisy chaining  
applications.  
8. RS-232 Connector  
For factory use only.  
9. SCART (AV) Connector (BDS4222V & BDS4222R only)  
Connect to external sources such as VCRs or DVD players.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
User Manual BDS4222B/V/R  
4.4  
REMOTE CONTROL  
1. Sound Mute On/Off  
2. Number Keypad  
Use number keypad to select the TV channel you want to watch.  
(BDS4222R only).  
1
2
8
3. Stereo and Dual  
Activates Stereo reception for TV or Dual for second language.  
(BDS4222R only).  
4. Volume +/-  
Turns volume up or down.  
5. Teletext  
Activates the TELETEXT mode. (BDS4222R only; see page 39)  
9
3
4
6. PIP Source  
Changes the input source of the PIP among TV/AV Component input  
sources. (See page 29)  
10  
7. Swap  
Swaps the main and sub picture windows under PIP or POP modes.  
(See page 30)  
8. Standby Power On/Off  
Push this button to switch on the monitor from Standby mode. Push  
it again to turn it off to Standby mode.  
11  
12  
5
9. Input Select  
Selects the input signal modes sequentially. (See page 21)  
10.Channel Up/Down  
13  
Changes the TV channels sequentially. (BDS4222R only)  
6
7
11.PIP (Picture-in-Picture Button)  
Activates the PIP (Picture-in-Picture) mode and POP (Side-by-Side)  
picture mode.  
14  
15  
12.Menu  
Activates the OSD menu.  
13.Info  
Shows the status of the monitor.  
14.PIP Position  
Changes the PIP sub-window to 4 different corner locations.  
(See page 31)  
15.Sub-Picture Channel Up/Down  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
User Manual BDS4222B/V/R  
5. CONNECTIONS TO EXTERNAL EQUIPMENT  
5.1  
CONNECTING TV OR CATV  
Using ANT input (BDS4222R only)  
1
Connect the RF cable from the antenna or cable socket to the  
antenna input (ANT) of the monitor.  
AIR or CABLE  
CO  
M
PO  
N
E
N
T VI  
D
EO/AUDIO I  
R
N
AUDIO O  
UT  
ANT  
Y
PB  
/ CB  
PR  
/ CR  
L
L
SCART INPUT (2x)  
DVI/  
S-VIDEO  
R
EO I  
L
R
R
G
B
L
N
R
VID  
N
AUDIO I  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
User Manual BDS4222B/V/R  
5.2  
CONNECTING A VCR  
CO  
M
PO  
N
E
N
T VI  
D
EO/AUDIO I  
R
N
AUDIO O  
UT  
Using SCART (AV) socket input (BDS4222V &  
BDS4222R only)  
ANT  
Y
PB / CB  
PR / CR  
L
L
SCART INPUT (2x)  
1
Connect the SCART socket of the videorecorder to the SCART  
socket of the monitor.  
D
VI/  
B
S-VIDEO  
R
EO I  
L
R
RG  
L
N
R
VID  
N
AUDIO I  
2
Connect the videorecorder to the antenna wall socket or cable box.  
VCR  
CO  
M
PO  
N
E
N
T VI  
D
EO/AUDIO I  
R
N
AUDIO O  
UT  
Using S-Video Input (BDS4222V & BDS4222R only)  
ANT  
Y
PB / CB  
PR / CR  
L
L
1
Connect the S-Video (4-pin DIN) connector of the VCR to the  
"S-VIDEO" input of the monitor.  
SCART INPUT (2x)  
DVI/  
S-VIDEO  
R
EO I  
L
R
R
G
B
L
N
R
2
Connect the red (R) and white (L) audio jacks of the VCR to the  
R and L audio-in jacks located next to the S-VIDEO connector.  
VID  
N
AUDIO I  
S-Video  
Audio L/  
R
(
4
-
P
in  
DIN)  
(2xRCA Cable)  
VCR  
CO  
M
PO  
N
E
N
T VI  
D
EO/AUDIO I  
R
N
AUDIO O  
UT  
Using TV Input (BDS4222R only)  
ANT  
Y
PB / CB  
PR / CR  
L
L
1
Connect the antenna out socket of the videorecorder to the antenna  
input (ANT) of the monitor.  
SCART INPUT (2x)  
DVI/  
S-VIDEO  
R
EO I  
L
R
R
G
B
L
N
R
2
Connect the videorecorder to the antenna wall socket or cable box.  
VID  
N
AUDIO I  
VCR  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
User Manual BDS4222B/V/R  
5.3  
CONNECTING A DVD PLAYER  
CO  
M
PO  
N
E
N
T VI  
D
EO/AUDIO I  
R
N
AUDIO O UT  
Using SCART (AV) socket input (BDS4222V &  
BDS4222R only)  
ANT  
Y
PB  
/ CB  
PR  
/ CR  
L
L
SCART INPUT (2x)  
1
Connect the SCART socket of the DVD player to the SCART socket  
of the monitor.  
D
VI/  
B
S-VIDEO  
R
EO I  
L
R
RG  
L
N
R
VID  
N
AUDIO I  
S
CART  
D
VD  
PL  
AYER  
Using Component Video Input (BDS4222V &  
BDS4222R only)  
CO  
M
PO  
N
E
N
T VI  
D
EO/AUDIO I  
R
N
AUDIO O UT  
ANT  
Y
PB  
/ CB  
PR  
/ CR  
L
L
SCART INPUT (2x)  
1
2
3
4
Connect the green-colored (labeled as "Y") jack of the DVD to the  
green-colored "Y1" jack of the monitor.  
D
VI/  
B
S-VIDEO  
R
EO I  
L
R
RG  
L
N
R
VID  
N
AUDIO I  
Connect the red-colored (labeled as "PR/CR") jack of the DVD to  
the red-colored "PR/CR" jack of the monitor.  
C
o
m
x
pon  
e
n
t
V
RCA cabl  
id  
e
o
A
x
udio L/ R  
RCA cables)  
(
3
e
)
(
2
Connect the blue-colored (labeled as "PB/ CB") jack of the DVD to  
the blue-colored "PB/CB" jack of the monitor.  
Connect the red (R) and white (L) audio jacks of the DVD to the R  
and L audio-in jacks of the monitor.  
D
V
D
PL  
A
YE  
R
Using S-Video Input (BDS4222V & BDS4222R only)  
CO  
M
PO  
N
E
N
T VI  
D
EO/AUDIO I  
R
N
AUDIO O  
UT  
ANT  
Y
PB  
/ CB  
PR  
/ CR  
L
L
1
Connect the S-Video (4-pin DIN) connector of the DVD to the  
"S-VIDEO" input of the monitor.  
SCART INPUT (2x)  
DVI/  
S-VIDEO  
R
EO I  
L
R
R
G
B
L
N
R
2
Connect the red (R) and white (L) audio jacks of the DVD to the R  
and L audio-in jacks located next to the S-VIDEO connector.  
VID  
N
AUDIO I  
A
x
udio L/  
RCA cables  
R
S
(4-Pin-DIN)  
-
v
id  
eo  
(
2
)
D
VD  
PL  
AYER  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
User Manual BDS4222B/V/R  
5.4  
EXTERNAL AUDIO CONNECTION  
CO  
M
PO  
N
E
N
T VI  
D
EO/AUDIO I  
R
N
AUDIO O UT  
Connecting to an External Amplifier  
ANT  
Y
PB  
/ CB  
PR  
/ CR  
L
L
This monitor can be connected to an external amplifier using the  
AUDIO OUT jacks located on the back of the monitor.  
SCART INPUT (2x)  
DVI/  
S-VIDEO  
R
EO I  
L
R
R
G
B
L
N
R
VID  
N
AUDIO I  
1
Connect the red (R) and white (L) AUDIO OUT jacks to the  
external amplifier or receiver.  
EXTERNAL P OWE  
M
R
Note:  
A
PLIFIER  
The AUDIO OUT RCA jacks can be set to either Fixed or Variable  
audio output levels. (See page 35 for more information)  
CO  
M
PO  
N
E
N
T VI  
D
EO/AUDIO I  
R
N
AUDIO O UT  
Connecting External Amplified Speakers  
ANT  
Y
PB  
/ CB  
PR  
/ CR  
L
L
This monitor can be connected to an external set of amplified speakers  
using the AUDIO OUT jacks located on the back of the monitor.  
SCART INPUT (2x)  
DVI/  
S-VIDEO  
R
EO I  
L
R
R
G
B
L
N
R
1
Connect the red (R) and white (L) AUDIO OUT jacks to the  
external amplified speakers.  
VID  
N
AUDIO I  
EXTERNA  
L
SPEAK  
AMPLIFIED  
ER  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
User Manual BDS4222B/V/R  
5.5  
CONNECTING A PC  
Using RGB(VGA) or DVI Video Input  
D
VI  
IN  
R
GB  
IN  
R
GB  
OU  
T
RS-2  
1
2
Connect the 15-pin D-Sub RGB(VGA) connector of the PC to the  
RGB-IN connector of the monitor.  
If you have a PC that is equipped with a DVI (Digital Visual Interface),  
you may connect the PC DVI connector from the PC to the DVI-IN  
connector of the monitor.  
R
G
B
in  
cable  
D-Sub)  
(
15  
P
For both RGB(VGA) and DVI, connect the red (R) and white (L)  
audio jacks of the PC to the R and L (DVI/RGB) AUDIO IN jacks of  
the monitor.  
OT  
M
H
E
ONITO  
R
R
R
G
B
Note:  
PC  
/
N
OTE  
B
OO  
K
PC/NOTEBOOK  
A RGB(VGA) loop-out labeled "RGB Out" will allow another  
RGB(VGA) monitor to be connected. The RGB(VGA) loop-out will  
display the same signal as the RGB In signal source.  
A
x
udio L/  
RCA cables)  
R
(2  
ANT  
SCART INPUT (2x)  
Setting Up Your Display Using Plug and Play  
This display adheres to VESA Plug and Play standard to eliminate  
complicated and time consuming setup of monitors. This monitor  
identifies itself to the computer and automatically sends the PC its  
Extended Display Identification Data (EDID) using Display Data Channel  
(DDC) protocols.  
A
x
udio L/  
R
RCA cables)  
(
2
How to Set up Your PC for Use with Monitor (Windows)  
The display settings for a typical Windows-based computer are shown  
below. However, the actual screens on your computer will differ  
depending on the version of Windows and video card equipped with the  
computer. Even though the actual screen may look different from  
example displayed below, basic set-up routine will apply in most cases.  
1
Go to the Window's CONTROL PANEL by clicking START,  
SETTINGS, CONTROL PANEL.  
=> The CONTROL PANEL Window is displayed.  
2
3
4
Select the DISPLAY icon from this window.  
=> The DISPLAY PROPERTIES dialog box is displayed.  
Select the SETTINGS tab to display your computer's video output  
settings.  
Set the "Screen Resolution" settings to 1024x768 PIXELS. For  
COLOR QUALITY, select 24 BIT COLOR (might also be expressed  
as 16 million colors).  
5
6
If a vertical-frequency option is available, set the value to 60 or  
60 Hz.  
Click OK to complete the setting.  
Note:  
Both screen position and size will vary, depending on the type of PC  
graphics card and its resolution selected. See page 45 for an overview of  
the supported resolutions.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
User Manual BDS4222B/V/R  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Manual BDS4222B/V/R  
6. BASIC FUNCTIONS  
6.1  
POWERING ON / OFF  
Make sure the monitor is plugged into the wall outlet and the main AC  
switch located in the rear of the monitor is switched to ON position.  
If the power is plugged in and the AC switch is on, the STATUS LED will  
illuminate in orange color.  
Using Front Panel or Remote Control  
1
Press the POWER key on the monitor panel or the remote control.  
=> The monitor will now turn on after a brief pause. The STATUS  
LED will now turn green to indicate power on status.  
2
Turn off the power by pressing the POWER key on the front panel  
or the remote control again.  
6.2  
SELECTING SIGNAL SOURCE  
Using Front Panel or Remote Control  
1
Press the INPUT key on the monitor panel or the AV key on the  
remote control.  
2
Pressing the INPUT or AV key will cycle the monitor through all  
available input signal sources in the following order:  
AV2  
AV3 S-VIDEO  
TV  
AVI  
VGA  
DVI  
COMPONENT  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
User Manual BDS4222B/V/R  
6.3  
VOLUME ADJUSTMENT  
Using Front Panel or Remote Control  
1
2
Press VOLUME + on either the monitor panel or on the remote  
control to turn up sound volume.  
Press VOLUME - on either the monitor panel or on the remote  
control to turn down sound volume.  
Note:  
If the monitor's built-in speakers are turned off, then the volume  
controls will not affect volume generated by the built-in speaker.  
Using MUTE  
1
Press the MUTE key to silence the volume. When the monitors  
volume is muted, the monitor will display MUTE on the upper right  
corner of the screen.  
2
Press the the VOLUME keys, or press the MUTE key again to  
deactivate the mute function.  
Note:  
If the monitor's built-in speakers are turned off, then the volume  
controls will not affect volume generated by the built-in speaker.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
User Manual BDS4222B/V/R  
6.4  
ON-SCREEN DISPLAY MENU  
Accessing OSD Menu via Remote Control or Front Panel  
The On-Screen Display (OSD) menu allows access to setup various  
parameters equipped with this display.  
1
To access the OSD menu, press MENU button on the monitor panel  
or remote control.  
2
Navigation through the OSD Menu can be accomplished using the  
arrow keys on the remote control or monitor panel SEL keys.  
6.5  
ON-SCREEN DISPLAY STATUS  
The On-Screen Status Display shows detailed information regarding the  
operational status of the monitor. The status display automatically  
appears whenever there is a change in the state of the monitor such as  
channel change or input change. The status display will automatically  
disappear after a timeout period.  
Showing Display Status  
1
Press the Info key on the remote control to manually show the  
Status Display.  
AV Mode  
PIP  
AV CVBS Stereo 16:9  
Input Source  
Component Mode  
Y Cb Cr Stereo 16:9  
Input Source  
RGB/DVI Mode  
Input Source  
Signal Format  
VGA M.21 Stereo 16:9  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
User Manual BDS4222B/V/R  
6.6  
UNDERSTANDING WIDESCREEN MODES  
This monitor is capable of displaying a widescreen image on the native  
16:9 aspect ratio screen. However, not all available video content fits  
perfectly in a widescreen (16:9) format resulting in unused screen space.  
This monitor is capable of displaying images in various formats that are  
suitable for various types of content depending on its size.  
6.6.1 4:3 (SQUARE) CONTENT  
Content from traditional TV, VCR, and some DVD's are formatted using  
a "square" 4:3 format. When viewing content in this "Square" format the  
following viewing modes are suitable.  
4:3 (NORMAL)  
In 4:3 mode, the original 4:3 image is preserved but black bars are used  
to fill the the extra space on the left and right.  
16:9 (FULL)  
The original 4:3 image is proportionally stretched to fill the entire  
screen. This is the default setting from factory.  
CINERAMA  
The original 4:3 image is expanded in both the horizontal and vertical  
directions. The center of the picture is almost normal while the edges  
are considerably expanded.  
6.6.2 WIDESCREEN CONTENT  
Depending on the content displayed on this 16:9 monitor, you may  
notice smaller black bars on top or bottom of the screen. Use the  
following zoom modes to elimate black bars.  
ZOOM:  
Zoom is set to stretch 2.35:1 content to full screen eliminating black  
bars.  
ZOOM  
:
Zoom shifts the image up to display sub-titles.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
User Manual BDS4222B/V/R  
6.7  
CHANGING ASPECT RATIOS  
Using Remote Control  
1
All widescreen viewing modes are available by pressing the ZOOM +  
or ZOOM - key:  
Note:  
● Under RGB(VGA) and DVI input modes, only 16:9 WIDE and 4:3  
Normal modes are available.  
● When displaying Y Pb Pr signals, the Cinerama mode is not available.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
User Manual BDS4222B/V/R  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Manual BDS4222B/V/R  
7. ADVANCED FUNCTIONS  
7.1  
PICTURE CONTROLS  
7.1.1 ADJUSTING PICTURE SETTINGS  
Various picture adjustments can be set using the Picture Adjustment  
OSD menu.  
1
2
Press the MENU key on the monitor panel or remote control.  
76000 K  
Use the ADJ  
the menu.  
or ADJ  
key to select the PICTURE option from  
=> Various picture settings are available from the PICTURE menu.  
3
Use the SEL  
adjust.  
or SEL  
key to select the option that you wish to  
4
5
Press the ADJ  
or ADJ  
key to change the setting.  
Press the EXIT key to close the OSD screen, or press the SEL  
SEL key to keep adjusting.  
or  
76000 K  
Notes:  
● H-Position, H-Size, V-Position, V-Size adjustments are only available  
in RGB(VGA), DVI and Component input with Y PB/PR.  
● When using Component input with Y CB/CR signals, H-Size,  
H-Position, V-Position and V-Size settings are not available.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
User Manual BDS4222B/V/R  
Explanation of Various Picture Control Settings  
.
CONTRAST  
Adjust Contrast to increase or decrease the level of white in the video picture. Increasing contrast will make white  
areas of the video picture brighter. Contrast works in conjuction with Brightness.  
BRIGHTNESS  
Adjust brightness to enhance the level of dark areas in the video picture such as night scenes and shadow scenes.  
Increasing brightness will make dark areas more visible.  
COLOR  
Use color to adjust the color saturation of the video picture. Increasing color will make the color more intense.  
Reducing color setting will make the color less intense.  
SHARPNESS  
Use sharpness to adjust the amount of detail enhancement to the video picture. Increasing the setting will enhance  
the edges of objects in the video picture. Decreasing the setting will reduce enhancement.  
TONE  
Select the color temperature for white balance. There are three settings to choose from : Cold, Neutral, Warm.  
AUTO FORMAT  
Use to turn on the auto format of screen or turn off. System will determine the format according to the signal  
when you turn on the auto format, otherwise, the screen will remain in 16:9.  
V-SIZE  
Use to change vertical size of the picture. Increase to enlarge the picture size in the vertical direction. Decrease to  
reduce the picture size in the vertical direction.  
V-POSITION  
Use to change vertical position of the picture. Increase to shift the picture up. Decrease to shift the picture down.  
H-SIZE  
Use to change horizontal size of the picture. Increase to enlarge the picture size in the horizontal direction.  
Decrease to reduce the picture size in the horizontal direction.  
H-POSITION  
Use to change horizontal position of the picture. Increase to shift the picture to the right. Decrease to shift the  
picture to the left.  
CLOCK PHASE  
Use clock phase to fine-tune the monitor to perfectly synchronize to the video signal source under RGB(VGA)  
mode.  
Notes:  
● H-Position, H-Size and V-Position adjustments are only available in RGB(VGA), DVI, and Component input modes higher  
than 480i.  
● When using Component inputs with Y CB/CR signals, H-Size, H-Position, V-Size, V-Position settings are not available.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Manual BDS4222B/V/R  
7.1.2 PICTURE-IN-PICTURE (PIP) / SIDE-BY-SIDE  
PICTURE (POP)  
PIP and POP modes allow you to view two video input sources  
simultaneously.  
Turning On PIP or POP Mode  
1
2
3
Press the PIP key once on the remote control to activate PIP mode.  
Press the PIP again to switch to POP mode.  
Press the PIP key sequentially will cycle between:  
PIP mode:  
PIP Mode  
In PIP mode, a small window is displayed in one of the four corners.  
The OSD on the upper right corner will denote the input selected for  
main picture (large screen) and the sub-picture (small screen) displayed.  
Input source for  
Main picture  
Input source for  
Sub picture  
Notes:  
S: AV  
M: TV  
Sub picture  
● Once PIP is turned off, the next time you return on PIP mode, the  
position of the subwindow will start at default position.  
● In PIP mode it is not possible to combine video input (e.g. TV, AV, S-  
Main picture  
Video) with data input (e.g. DVI, RGB(VGA)).  
POP mode:  
POP Mode  
Input source for  
Main picture  
In POP mode, the screen will be split in half. The screen on the left side  
is the main picture and the screen on the right is the sub-picture. The  
OSD on the upper right corner will denote the input signal source for  
both the main and sub-pictures.  
Input source for  
Sub picture  
S: AV  
M: TV  
Sub picture  
There are two Side-by-Side picture modes available in addition to the  
standard POP mode:  
Main picture  
■
POP (4:3) mode will display both main and subpicture in a 4:3 aspect  
ratio within the POP windows.  
■
POP (16:9) mode will display both main and sub-picture in 16:9  
aspect ratio within the POP windows.  
POP 4:3 Mode  
Main  
Picture  
Sub  
Picture  
POP 16:9 Mode  
Main  
Picture  
Sub  
Picture  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
User Manual BDS4222B/V/R  
Selecting Signal Source for Sub-Picture  
Various signal sources can be displayed within the sub-window under PIP  
and Side-by-Side modes.  
1
Once the PIP mode is turned on, you can change the sub-picture  
input source by pressing the SOURCE key.  
2
Pressing the SOURCE key repeatedly will cycle through all available  
inputs for the sub-picture.  
AVI  
VGA  
AV2  
AV3 S-VIDEO  
TV  
DVI  
COMPONENT  
Note:  
In PIP mode it is not possible to combine video input (e.g. TV, AV, S-  
Video) with data input (e.g. DVI, RGB(VGA)).  
Selecting Signal Source for Main Picture  
1
Once the PIP mode is turned on, you can change the main picture  
input source by pressing the AV key.  
Swapping Main and Sub-Window  
You can swap the main picture and sub-picture.  
1
2
Press the SWAP key once to swap.  
Press the SWAP key once again to switch back.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
User Manual BDS4222B/V/R  
Changing Location of PIP Image  
There are four preset positions where the PIP sub-window can be  
positioned. Once the PIP mode is turned on, you can switch the PIP sub-  
picture position to any one of the four corners of the screen.  
1
Press the POSITION key to switch positions.  
2
Pressing the POSITION key repeatedly will cycle through all four  
corners of the screen.  
Sub-Picture Positions  
Default position  
Changing Channels in PIP or POP Mode  
1
If TV mode is in main window, press the CHANNEL Up/Down key  
to change channels.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
User Manual BDS4222B/V/R  
7.1.3 SELECTING COLOR TEMPERATURE  
This monitor is capable of applying various color temperatures (also  
known as White Balance) onto the video signal for display.  
1
2
Press the MENU key on the monitor panel or remote control.  
76000 K  
Use the ADJ  
the menu.  
or ADJ  
or SEL  
or ADJ  
key to select the PICTURE option from  
key to select the TONE option from the  
key to change the setting.  
3
Use the SEL  
menu.  
4
5
Press the ADJ  
Press EXIT to close the OSD screen, or press the SEL  
SEL key to keep adjusting.  
or  
76000 K  
7.1.4 FINE TUNING RGB(VGA) MODE  
Due to various PC video cards and set-top boxes with differing  
specifications, it is likely that the initial video picture have subtle noise or  
imperfections. Please use the following procedures to adjust the picture  
quality when using under RGB(VGA) mode.  
76000 K  
1
2
Press the MENU key on the monitor panel or remote control.  
Use the ADJ  
the menu.  
or ADJ  
or SEL  
or ADJ  
key to select the PICTURE option from  
key to select the CLOCK PHASE option  
key to change the setting so that your  
3
4
5
Use the SEL  
from the menu.  
Press the ADJ  
76000 K  
video picture is the best quality.  
Press EXIT to close the OSD screen, or press the the SEL  
or  
SEL  
key to keep adjusting.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
User Manual BDS4222B/V/R  
7.1.5 FIT PICTURE TO SIZE OF MONITOR  
Due to various PC video cards and set-top boxes with differing  
specifications, it is likely that the initial picture may not fit exactly to the  
size of the monitor. Please use the following procedures to adjust the  
picture size and position.  
76000 K  
1
2
Press the MENU key on the monitor panel or remote control.  
Use the ADJ  
the menu.  
or ADJ  
key to select the PICTURE option from  
3
Use the SEL  
or SEL  
key to select V-SIZE, V-POSITION,  
H-SIZE or H-POSITION from the menu.  
4
5
Press the ADJ or ADJ key to change the setting so that your  
video picture is best fit within the display area of the monitor.  
76000 K  
Repeat the procedure for the V-Size, V-Position, H-Size and H-  
Position settings until video picture is fully displayed within the  
monitor's display area.  
6
Press EXIT to close the OSD screen.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
User Manual BDS4222B/V/R  
7.2  
SOUND CONTROLS  
7.2.1 ADJUSTING SOUND SETTINGS  
Various sound adjustments can be set using the Sound Adjustment OSD  
menu.  
1
2
Press the MENU key on the monitor panel or remote control.  
Use the ADJ  
the menu.  
or ADJ  
key to select the SOUND option from  
=> Various sound settings are available from the SOUND menu.  
3
Use the SEL  
adjust.  
or SEL  
key to select the option that you wish to  
4
5
Press the ADJ  
or ADJ  
key to change the setting.  
Press the EXIT key to close the OSD screen, or press the SEL  
SEL key to keep adjusting.  
or  
Explanation of Various Sound Control Settings  
.
BASS  
Adjusts the BASS level of the sound. For more bass response, increase the BASS level.  
TREBLE  
Adjusts the TREBLE level of the sound. For more vocal and high frequency response, increase the TREBLE level..  
BALANCE  
Adjusts the BALANCE level between LEFT and RIGHT channels.  
SPEAKER  
Sets the speakers to ON to turn on the speakers or sets the speakers to OFF to turn off. This setting will not  
affect AUDIO OUTPUT jacks.  
AUDIO OUTPUT  
Sets the type of audio output sent from the audio output jacks located in the rear of monitor. When set to  
VARIABLE, audio output is affected by the monitor's internal volume controls . When set to FIXED, the audio  
output bypasses the monitor's internal audio control so that functions such as bass, treble and volume controls  
have no effect.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
User Manual BDS4222B/V/R  
7.2.2 BUILT-IN AMPLIFICATION (SPEAKER)  
Turning On Built-in Amplification  
This monitor is equipped with a built-in amplication for optional external  
speakers. You can switch the amplification ON or OFF using the OSD.  
Because these speakers are general purpose, you may consider switching  
them OFF during hi-fidelity playback of movies or other content.  
1
2
Press the MENU key on the monitor panel or remote control.  
Use the ADJ  
the menu.  
or ADJ  
or SEL  
or ADJ  
key to select the SOUND option from  
key to select the INTERN. SPEAKER  
key to change the setting (ON/OFF).  
3
Use the SEL  
option.  
4
5
Press the ADJ  
Press the EXIT key to close the OSD screen, or press the SEL  
SEL key to keep adjusting.  
or  
7.2.3 FIXED / VARIABLE AUDIO OUTPUT  
Setting Output Using OSD Menu  
You can set the type of output this monitor outputs from its rear panel  
audio output jacks. By using OSD menu, you can easily choose between  
variable or fixed audio outputs.  
1
2
Press the MENU key on the monitor panel or remote control.  
Use the ADJ  
the menu.  
or ADJ  
or SEL  
or ADJ  
key to select the SOUND option from  
key to select the AUDIO OUTPUT  
key to change the setting:  
3
4
Use the SEL  
option.  
Press the ADJ  
●
●
When set to VARIABLE, the audio output is affected by the  
monitor's internal audio controls.  
When set to FIXED, the audio output bypasses the monitor's  
internal audio controls.  
5
Press the EXIT key to close the OSD screen, or press the SEL  
SEL key to keep adjusting.  
or  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
User Manual BDS4222B/V/R  
7.3  
OSD MENU LANGUAGE  
This monitor has multiple OSD Menu languages built-in including English,  
French, Spanish, Italian and German.  
Setting OSD Menu Language  
PICTURE  
SOUND TV  
ON  
OTHER  
1
Press the MENU key on the monitor panel or remote control.  
Power Save  
Menu Language  
AVI Input  
AV2 Input  
Pixel Shift  
Burn-In Recovery  
S/W Version  
English  
Video  
Video  
1 minute  
Normal  
2
Use the ADJ  
the menu.  
or ADJ  
or SEL  
or ADJ  
key to select the OTHER option from  
key to select the MENU LANGUAGE  
key to select the required OSD  
3
4
5
Use the SEL  
option.  
Press the ADJ  
language.  
Select  
Adjust  
Press the EXIT key to close the OSD screen, or press the SEL  
or  
PICTURE  
SOUND TV  
OTHER  
SEL  
key to keep adjusting.  
Power Save  
Menu Language  
AVI Input  
ON  
English  
Video  
AV2 Input  
Video  
Pixel Shift  
Burn-In Recovery  
S/W Version  
1 minute  
Normal  
Select  
Adjust  
7.4  
POWER SAVE MODE  
This monitor is equipped with a Power Save mode under RGB(VGA) or  
DVI input modes. When there are no signals detected by the monitor  
for 15 minutes, the monitor will automatically go into sleep mode until  
signal is restored.  
Setting Power Save Mode  
PICTURE  
SOUND TV  
OTHER  
1
Press the MENU key on the monitor panel or remote control.  
Power Save  
Menu Language  
AVI Input  
ON  
English  
Video  
2
Use the ADJ  
the menu.  
or ADJ  
key to select the OTHER option from  
AV2 Input  
Video  
Pixel Shift  
Burn-In Recovery  
S/W Version  
1 minute  
Normal  
3
4
5
Use the SEL  
or SEL  
or ADJ  
key to select the POWER SAVE option.  
key to change the setting (ON/OFF)  
Press the ADJ  
Select  
Adjust  
Press the EXIT key to close the OSD screen, or press the SEL  
SEL key to keep adjusting.  
or  
PICTURE  
SOUND TV  
OTHER  
Power Save  
Menu Language  
AVI Input  
ON  
English  
Video  
AV2 Input  
Video  
Pixel Shift  
Burn-In Recovery  
S/W Version  
1 minute  
Normal  
Select  
Adjust  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
User Manual BDS4222B/V/R  
7.5  
INFORMATION DISPLAY  
The information display sub-menu shows information about the  
monitor’s firmware version number.  
Viewing Firmware Version Number  
PICTURE  
SOUND TV  
ON  
OTHER  
1
Press the MENU key on the monitor panel or remote control.  
Power Save  
Menu Language  
AVI Input  
AV2 Input  
English  
Video  
Video  
2
Use the ADJ  
the menu.  
or ADJ  
key to select the OTHER option from  
Pixel Shift  
Burn-In Recovery  
S/W Version  
1 minute  
Normal  
3
Press the EXIT key to close the OSD screen.  
Select  
Adjust  
7.6  
PIXEL SHIFT FUNCTION  
Static images left on-screen for extended periods of time may leave a  
“ghost image” on plasma displays. For this reason the monitor is  
equipped with a protective function that detects static images. After a  
period of little or no image movement, the protection mechanism  
automatically shifts pixel positions to prevent creation of a "ghost  
image". The time interval between pixel shifting can be set by the user.  
Setting Pixel Shift Interval  
PICTURE  
SOUND TV  
OTHER  
1
Press the MENU key on the monitor panel or remote control.  
Power Save  
Menu Language  
AVI Input  
ON  
English  
Video  
2
Use the ADJ  
the menu.  
or ADJ  
key to select the OTHER option from  
AV2 Input  
Video  
Pixel Shift  
Burn-In Recovery  
S/W Version  
1 minute  
Normal  
3
4
5
Use the SEL  
or SEL  
or ADJ  
key to select the PIXEL SHIFT option.  
key to change the setting.  
Press the ADJ  
Select  
Adjust  
Press the EXIT key to close the OSD screen, or press the SEL  
SEL key to keep adjusting.  
or  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
User Manual BDS4222B/V/R  
7.7  
BURN-IN RECOVERY  
The Burn-In Recovery function is used to remove "ghost images" from  
the monitor display.  
Using Burn-In Recovery  
PICTURE  
SOUND TV  
ON  
OTHER  
1
Press the MENU key on the monitor panel or remote control.  
Power Save  
Menu Language  
AVI Input  
AV2 Input  
Pixel Shift  
Burn-In Recovery  
S/W Version  
English  
Video  
Video  
1 minute  
Normal  
2
Use the ADJ  
the menu.  
or ADJ  
or SEL  
or ADJ  
key to select the OTHER option from  
key to select the BURN-IN RECOVERY  
key to change the setting to ON.  
3
4
Use the SEL  
option.  
Press the ADJ  
Select  
Adjust  
=> Once the Burn-in Recovery is set to ON, the monitor will display  
an all white pattern. This pattern will remove the residual "ghost  
image" from the screen.  
Note:  
The white pattern will be displayed on the monitor until cancelled by the  
user.  
5
Press the EXIT key to cancel the display of the white pattern after  
the "ghost image" has been removed.  
6
Press the EXIT key again to close the OSD screen, or press the  
SEL  
or SEL  
key to keep adjusting  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
User Manual BDS4222B/V/R  
7.8  
TELETEXT  
The Teletext service is available in many countries under a variety of  
names (TOP Text, Fastext, FLOF test, Videotext). It is provided as a free  
service by some television broadcasters. This service provides a real  
wealth of information, available at any time, on weather, sporting results,  
news, games, etc. The information is presented in pages or organised in  
topics specified in colour on the screen and you can access this  
information by simply pressing the keys of the same colour on the  
remote control.  
Accessing Teletext  
1
Press the TEXT key on the remote control.  
=> Teletext opens on the index page (100).  
2
Press the CHANNEL  
or CHANNEL  
key to select the next  
and previous page, or enter its number using the numeric buttons.  
=> The page/subpage number appears:  
●
In green when the page has not been found yet.  
In white when the page has been found.  
●
Overview of Teletext Functions  
■
HOLD  
Freezes the current page, preventing update and subpage display.  
To select this function, press the HOLD/POSITION key on the  
remote control. To cancel, press the HOLD/POSITION key again.  
■
■
REVEAL  
Reveals hidden page information. Press the REVEAL/SOURCE key to  
show the information again.  
ZOOM  
Press the ZOOM/SWAP key once to zoom in on the top part of the  
screen. Press twice to zoom in on the bottom part of the screen and  
three times to return to normal display.  
If you want to show PIP in Teletext, press the PIP key on the remote  
control first to display PIP screen, then press the TEXT key on the  
remote control.  
■
Newsflash  
When access NewsFlash page, Teletext is automatically enabled and  
displays the new information. To hide the information screen, press  
the NewsFlash/CH- key. Press the NewsFlash/CH- key again to  
show the information again.  
■
■
TEXT N  
You can change the character of Teletext at any time. Press the  
TEXT/CH+ key to choose one of the seven Texts.  
Subtitles  
Some channels provide subtitles for some of their programmes  
through Teletext. The numbers of the relevant pages are specified  
on the Teletext index page.  
To display the subtitles, enter the number of the relevant page.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
User Manual BDS4222B/V/R  
Once it is found, the subtitles appear in the TV picture. The header  
disappears after a couple of seconds. To display them again, press  
any button (except EXIT or the volume adjustment buttons) on the  
remote control.  
To return to TV mode, press EXIT.  
■
Alarm page  
In some countries (Spain, Benelux, etc.), you can set a time to display  
certain Teletext pages (alarm pages).  
To do this, display the relevant alarm page and press the ADJ  
or  
ADJ key to enter subpage mode. Enter the time instead of the  
subpage number (e.g. 1435 for 14:35) and press exit. The page will  
disappear and will appear again at the set time, as long as you do not  
change channels or switch off the set beforehand.  
■
Fasttext  
If fasttext is available, you can easily access the topic and relevant  
pages you want by pressing the red, green, yellow and blue  
buttons on the remote control.  
In Teletext mode, volume controls remain available, but the relevant  
symbols are not shown on the screen.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Manual BDS4222B/V/R  
7.9  
TV FUNCTIONS (BDS4222R ONLY)  
7.9.1 INITIAL SET UP  
When you turn on the TV for the first time, the language selection menu  
appears.  
1
2
3
Use the SEL  
(English, Francis, Deutsch, Italiano or Espanol).  
or SEL  
key to select the required language  
Press the ADJ or ADJ key to confirm the selection.  
=> A list of countries appears.  
Use the SEL or SEL key to select the country you are in. If  
your country is not on the list, select Other.  
=> The monitor will now search all available channels. It may take  
several minutes for the search to complete. When the search is  
complete, the screen will show how many channels are found then  
change to the EDITOR screen.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
User Manual BDS4222B/V/R  
7.9.2 MANUAL CHANNEL SEARCH  
You may also make a manual search, in case, some channels are not  
stored during the initial set up.  
1
2
Press the MENU key on the monitor panel or remote control.  
Use the ADJ  
menu.  
or ADJ  
or SEL  
or ADJ  
key to select the TV option from the  
key to select the MANUAL SEARCH  
key to confirm the selection.  
3
4
Use the SEL  
option.  
Press the ADJ  
=> The MANUAL SEARCH menu is now displayed.  
5
6
Select the Standard option.  
Select the signal system then use the ADJ  
or ADJ  
key to  
search the frequency based on the current frequency shown on the  
menu. Or you can just key in the frequency with number key on the  
remote control.  
=> When a channel is found, the Save on CH option will be flashing  
with red color.  
7
Press OK key to confirm the channel which is searched.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
User Manual BDS4222B/V/R  
7.9.3 CHANNEL EDIT  
You can swap, delete the channel, even change the name of channel in  
EDITOR menu.  
1
2
Press the MENU key on the monitor panel or remote control.  
Use the ADJ  
menu.  
or ADJ  
key to select the TV option from the  
3
4
Use the SEL  
or SEL  
or ADJ  
key to select the EDITOR option.  
key to confirm the selection.  
Press the ADJ  
=> The EDITOR menu is now displayed.  
5
6
Use the SEL or SEL key to select SWAP, DELETE or  
CHANGE CH NAME to do the relevant setting.  
After adjusting, press OK key to confirm.  
7.10  
ON-SCREEN STATUS DISPLAY (TV MODE)  
(BDS4222R ONLY)  
TV Mode (single Tuner)  
The On-Screen Status Display shows detailed information regarding the  
operational status of the monitor under TV mode. The status display  
automatically appears whenever there is a change in TV channels. The  
status display will automatically disappear after a timeout period.  
Antenna  
Type/Channel  
CH 02  
Displaying Status  
1
Press the Info key on the remote control.  
7.10.1 CHANGING CHANNELS  
To change TV channels, you can use either the remote control or the  
front panel keys.  
1
2
Switch input to TV.  
Press CHANNEL  
or CHANNEL  
key on the remote control  
to change channels. You can also press the SEL UP/DOWN keys on  
the monitor panel when there is no OSD on the screen.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
User Manual BDS4222B/V/R  
7.10.2 SOUND TYPE  
SOUND TYPE option sets audio reception settings for the TV tuner.  
Accessing via OSD Menu  
1
Press the MENU key on the monitor panel or remote control.  
2
Use the ADJ  
the menu.  
or ADJ  
key to select the SOUND option from  
3
4
Use the SEL  
Use the ADJ  
or SEL  
or ADJ  
key to select the SOUND TYPE option.  
key to change the setting.  
See the table for reference about the available options:  
Broadcast  
Mono  
Stereo  
Options  
Mono, Automatic  
Mono, Stereo  
Bilingual  
NICAM bilingual  
AV  
Sound1, Sound2  
Sound1, Sound2, Sound3  
Stereo, Sound1, Sound2  
5
After selecting the desired setting, press the EXIT key to close the  
OSD menu, or press the SEL or SEL key to keep adjusting.  
Accessing via Remote Control  
1
Press the I/II key on the remote control repeatedly to cycle through  
all available audio modes.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
User Manual BDS4222B/V/R  
8. TECHNICAL SPECIFICATIONS  
8.1  
SPECIFICATIONS  
Display Panel  
Screen Size  
42"  
Aspect Ratio  
Number of Pixels  
Pixel Pitch  
16:9  
852 (Horizontal) x 480 (Vertical)  
1.08mm x 1.08mm  
1000 cd/m2 , at 1/25 white window pattern  
Luminance  
Power Source  
Input Voltage  
Input Current  
Inrush Current  
100 ~ 240 Vac; 50/60 Hz  
3.8 A  
60 A p-p/ 20 ms max.  
Power Consumption 380 10% Watts (at 110 Vac/ color bar pattern)  
Stand-by & Power  
Save  
5Watts max. (at 110 Vac)  
Connections  
Connector Types  
2 Scart Input Socket  
RCA Jacks for audio, video, Y/CB/CR and Y/PB/PR  
4-pin DIN S-terminal for S-Video  
9-pin Sub-D for RS-232  
15-pin Sub-D for RGB  
24-pin DVI  
Video/S-Video Signal  
Type  
Analog  
Polarity  
Positive  
Amplitude  
Video 1 Vp-p (with sync), S-Video Y=1 Vp-p  
C=0.286 Vp-p  
Frequency  
H: 15.734 kHz V: 60 Hz (NTSC)  
H: 15.625 kHz V: 50 Hz (PAL)  
75 ohms  
Input Impedance  
Y/C /C or Y/P /P Signal (Component 1 & 2)  
B
R
B
R
Type  
Analog  
Polarity  
Positive  
Amplitude  
Y: 1 Vp-p (with sync)  
CB/PB: 0.7 0.1 Vp-p  
CR/PR: 0.7 0.1 Vp-p  
H: 15.734 kHz  
Frequency  
Y/CB/CR  
V: 60 Hz (NTSC)  
H: 15.625 kHz  
V: 50 Hz (PAL)  
V: 60 Hz (480p)  
V: 60 Hz (720p)  
V: 60 Hz (1080i)  
V: 50 Hz (720p)  
V: 50 Hz (576p)  
V: 50 Hz (1080i)  
Y/PB/PR: HDTV  
H: 31 kHz  
H: 45 kHz  
H: 33 kHz  
H: 37.5 kHz  
H: 31.25 kHz  
H: 28.125 kHz  
RGB Signal  
Type  
TTL  
Polarity  
Amplitude  
Frequency  
Positive or Negative  
RGB: 0.7 Vp-p  
H: support to 31k ~ 91 kHz  
V: support to 50 ~ 85 Hz  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
User Manual BDS4222B/V/R  
DVI Signal  
Type  
Polarity  
Frequency  
Digital  
Positive or Negative  
H: support to 31k ~ 63 kHz  
V: support to 50 ~ 85 Hz  
Analog 500 mVrms / more than 22 kohms  
Audio Signal  
Pin Assignments for Sub-D Connector (In/ Loop Out)  
1 - RED  
6 - RED GND  
7 - GREEN GND  
8 - BLUE GND  
9 - NC  
11 - GND  
2 - GREEN  
3 - BLUE  
4 - GND  
5 - GND  
12 - SDA  
13 - H-SYNC  
14 - V-SYNC  
15 - SCL  
10 - GND  
Pin Assignments for 24-pin DVI Connector (Digital only))  
1 - TMDS Data 2-  
9 - TMDS Data 1-  
17 - TMDS Data 0-  
2 - TMDS Data 2+  
10 - TMDS Data 1+  
18 - TMDS Data 0+  
3 - TMDS Data 2/4 Shield 11 - TMDS Data 1/3 Shield 19 - TMDS Data 0/5 Shield  
4 - TMDS Data 4-  
5 - TMDS Data 4+  
6 - DDC Clock  
12 - TMDS Data 3-  
13 - TMDS Data 3+  
14 - +5 V Power  
20 - TMDS Data 5-  
21 - TMDS Data 5+  
22 - TMDS Clock Shield  
7 - DDC Data  
15 - Ground (for +5 V) 23 - TMDS Clock+  
16 - Hot Plug Detect 24 - TMDS Clock-  
8 - Not Connected  
RGB/DVI for VESA Standard  
Horizontal Vertical Dot Rate V-sync  
Rate (Hz) Frequency Frequency Polarity  
Mode No.Mode  
Resolution  
Refresh  
V-sync  
Polarity  
Polarity  
(KHz)  
(Hz)  
(MHz)  
25.175  
31.500  
31.500  
36.000  
36.000  
40.000  
50.000  
49.500  
56.250  
65.000  
75.000  
78.750  
94.500  
108.000  
28.322  
25.175  
74.250  
74.250  
25.175  
30.000  
30.240  
57.283  
100.000  
(TTL)  
(TTL)  
1
VGA  
640x480  
640x480  
640x480  
640x480  
800x600  
800x600  
800x600  
800x600  
800x600  
1024x768  
1024x768  
1024x768  
1024x768  
1280x1024  
720x400  
640x480  
1280x720p  
1920x1080i )  
640x350  
852x480  
640x480  
832x624  
1152x870  
60  
72  
75  
85  
56  
60  
72  
75  
85  
60  
70  
75  
85  
60  
70  
50  
60  
60 (i)  
70  
60  
67  
75  
75  
31.469  
37.861  
37.500  
43.269  
35.156  
37.879  
48.077  
46.875  
53.674  
48.364  
56.476  
60.023  
68.677  
63.981  
31.469  
31.469  
45.000  
33.750  
31.469  
31.413  
35.000  
49.725  
68.681  
59.940  
72.809  
75.000  
85.008  
56.250  
60.317  
72.188  
75.000  
85.061  
60.004  
70.069  
75.029  
84.997  
60.020  
70.087  
50.030  
60.000  
60.000  
70.087  
59.835  
66.667  
74.550  
75.062  
-
-
2
VGA  
-
-
3
VGA  
VGA  
-
-
4
-
-
5
SVGA  
SVGA  
SVGA  
SVGA  
SVGA  
XGA  
XGA  
XGA  
XGA  
SXGA  
DOS  
+
+
+
+
+
-
+
+
+
+
+
-
6
7
8
9
10  
11  
12  
13  
14  
18  
19  
20  
21  
22  
23  
24  
25  
26  
-
-
+
+
+
+
-
+
+
+
-
VGA  
-
HDTV  
HDTV  
VGA  
+
+
-
+
+
+
-
WGA  
APPLE  
APPLE  
APPLE  
-
-
-
-
-
-
-
* These modes are not supported in DVI mode.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Manual BDS4222B/V/R  
Y/P /P for Component 1 and 2  
B
R
Mode  
Resolution  
640x480p  
Refresh Rate  
60  
60  
60  
50  
50  
50  
1
2
3
4
5
6
1920x1080i  
1280x720p  
720x576p  
1920x1080i  
1280x720p  
Up to 1280x1024  
Max. Resolution  
Dimensions & Weight  
With Stand  
Without Stand  
Without Speakers  
Without Speakers  
1081 mm  
Width  
Height  
Depth  
Weight  
1081 mm  
722 mm  
677 mm  
220 mm  
95 mm  
77.6 lbs/ 35.2 kg  
80.5 lbs/ 36.5 kg  
Operating Conditions  
Temperature  
Relative Humidity  
Pressure  
0 ~ 40°C (32 ~104°F)  
20 ~ 80%  
700 ~ 1114 hPa  
Operating Conditions  
Temperature  
Relative Humidity  
Pressure  
-5 ~ 50°C  
20 ~ 80%  
600 ~ 1114 hPa  
X/Y/Z 0.5G/ 10 ~ 55 Hz (sweep)/  
Vibration  
10 minutes  
Acoustics  
(IHF A-weighted 1 meter)  
40 dB max.  
Sound  
Residual hum (at max. Volume)  
Practical max. audio output  
500 µW max.  
5 W +5 W max. /12 ohms  
(at 10% THD max.)  
Sound distortion  
(at 250 mW 1 kHz)  
1% max.  
>= 1.0 Vp-p  
Audio output (input at 1.4 Vp-p  
Reliability Requirement  
The MTBF is 20,000 hrs under operation at 25 5°C (Half luminosity,  
motion picture).  
Emission Requirement  
The unit meets the EMI limits in all screen modes, as qualified by FCC,  
class B, part 15.  
Power Management  
Mode  
H-sync  
V-sync  
Pulse  
Video  
Active  
Power dissipation  
Normal power  
Normal  
Pulse  
Stand-by  
No pulse No pulse No video Power off  
Power saving Pulse  
Power saving No pulse Pulse  
No pulse Blanked  
Less than 5 Watts  
Less than 5 Watts  
Blanked  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Manual BDS4222B/V/R  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Manual BDS4222B/V/R  
9. CLEANING AND TROUBLESHOOTING  
9.1  
CLEANING  
Cautions When Using the Plasma Display  
■
Do not bring your hands, face or objects close to the ventilation  
holes of the plasma display. Top of plasma display is usually very hot  
due to the high temperature of exhaust air being released through  
the ventilation holes. Burns or personal injuries may occur if any  
body parts are brought too close. Placing any object near the top of  
the display could also result in heat related damages to the object as  
well as the display itself.  
■
■
Be sure to disconnect all cables before moving the plasma display.  
Moving the display with its cables attached may damage the cables  
and thus case fire or electric shock danger.  
Disconnect the power plug from the wall outlet as a safety  
precaution before carrying out any type of cleaning or maintenance  
procedure.  
Front Panel Cleaning Instructions  
■
The front of the display has been specially treated. Wipe the surface  
gently using only a cleaning cloth or a soft, lint-free cloth.  
■
If the surface is particular dirty, soak a soft, lint-free cloth in a mild  
detergent solution. Wring the cloth to remove excess liquid. Wipe  
the surface of the display to remove dirt. Then use a dry cloth of the  
same type to dry.  
■
■
Do not scratch or hit the surface of the panel with fingers or hard  
objects of any kind.  
Do not use volatile substances such as insect sprays, solvents and  
thinners.  
Cabinet Cleaning Instructions  
■
If the cabinet becomes dirty, wipe the cabinet with a soft, dry cloth.  
■
If the cabinet is extremely dirty, soak a lint-free cloth in a mild  
detergent solution. Wring the cloth to remove as much moisture as  
possible. Wipe the cabinet. Use another dry cloth to wipe over until  
the surface is dry.  
■
Do not allow any water or detergent to come into contact with the  
surface of the display. If water or moisture gets inside the unit,  
operating problems, electrical and shock hazards may result.  
■
■
■
Do not scratch or hit the cabinet with fingers or hard objects of any  
kind.  
Do not use volatile substances such as insect sprays, solvents and  
thinners on the cabinet.  
Do not place anything made from rubber or PVC near the cabinet  
for any extended periods of time.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
User Manual BDS4222B/V/R  
9.2  
TROUBLESHOOTING  
Symptom  
Possible Cause  
Remedy  
No picture is displayed  
1 The power cord is disconnected.  
1 Plug in the power cord.  
2 The main power switch on the back of the  
monitor is not switched on.  
3 The selected input has no connection.  
4 The monitor is in standby mode in RGB  
mode.  
2 Make sure the power switch is switched on.  
3 Connect a signal connection to the monitor.  
4 Press any key on your keyboard.  
Interference displayed on the Caused by surrounding electrical appliances,  
Move the monitor to another location to see if  
the interference is reduced.  
monitor or audible noise is  
heard  
cars/motorcycles or fluorescent lights.  
Color is abnormal  
The signal cable is not connected properly.  
Make sure that the signal cable is  
attached firmly to the back of the  
monitor.  
Picture is distorted with  
abnormal patterns  
1 The signal cable is not connected properly.  
2 The input signal is beyond the capabilities of  
the monitor.  
1 Make sure that the signal cable is attached  
firmly.  
2 Check the video signal source to see if it is  
beyond the range of the monitor. Please  
verify its specifications with this monitor’s  
specification section  
Display image doesn’t fill up  
the full size of the screen  
1 If under RGB mode, the H-Size and V-Size is 1 Use H-Size and V-Size to adjust the size of  
incorrectly set. the video.  
2 If under AV1, AV2, or Component with 480i 2 Use the WIDE key to scroll through various  
input, the 4:3 WIDE mode is switched on.  
full screen modes.  
Can hear sound, but no  
picture  
Improperly connected source signal cable. 1.  
Make sure that both video inputs and sound  
inputs are correctly connected.  
Can see picture but no sound 1 Improperly connected source signal cable.  
1 Make sure that both video inputs and sound  
inputs are correctly connected.  
2 Use VOLUME +/- to hear sound.  
is heard  
2 Volume is turned all the way down.  
3 MUTE is turned on.  
3 Switch MUTE off by using the MUTE button.  
Some picture elements do  
not light up  
Some pixels of the plasma display may not turn This monitor is manufactured using an  
on  
extremely high level of precision technology;  
however, sometimes some pixels of the monitor  
may not display.  
This is not a malfuction. Please see the enclosed  
warranty card for more information.  
After-Images can still be seen A still picture is displayed for an over extended Do not allow a still image to be displayed for an  
on the monitor after the  
monitor is powered off.  
(Examples of still pictures  
include logos, video games,  
computer images, and images  
displayed in 4:3 normal  
mode)  
period of time.  
extended period of time as this can cause a  
permanent after-image to remain on the  
monitor.  
..  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
User Manual BDS4222B/V/R  
10. LIMITED WARRANTY (EUR)  
Two Year Free Labor  
Two Year Free Parts  
WHO IS COVERED?  
You must have proof of the date purchased to receive warranty service.  
A sales receipt or other document showing the date that you purchased  
the product is considered proof of purchase.  
WHAT IS COVERED?  
Warranty coverage begins the day you buy your product. For two years  
thereafter, all defective parts will be repaired or replaced and labor is  
free. After two years from the day of purchase, you pay for the  
replacement or repair of all parts, and for all labor charges. All parts,  
including repaired and replaced parts, are covered only for the original  
warranty period. When the warranty on the product expires, the  
warranty on all replaced and repaired parts also expires.  
WHAT IS EXCLUDED?  
Your warranty does not cover:  
■
labor charges for removal, installation or setup of the product,  
adjustment of customer controls on the product, and installation or  
repair of antenna systems outside of the product.  
■
product repair and/or part replacement because of misuse, accident,  
unauthorized repair or other cause not within the control of Philips  
Consumer Electronics Europe.  
■
■
reception problems caused by signal conditions or cable or antenna  
systems outside the unit.  
a product that requires modification or adaptation to enable it to  
operate in any country other than the country for which it was  
designed, manufactured, approved and/or authorized, or repair of  
products damaged by these modifications.  
■
■
incidental or consequential damages resulting from the product.  
(Some states do not allow the exclusion of incidental or  
consequential damages, so the above exclusion may not apply to you.  
This includes, but is not limited to, prerecorded material, whether  
copyrighted or not copyrighted.)  
modifications or adaptations to enable the product to operate in any  
country other than the country for which it was designed,  
manufactured, approved and/or authorized, or the repair of products  
damaged by these modifications.  
■
■
■
normal wear and tear (decreased light output of PDP module) over  
the product's lifetime.  
phosphor burn. Do not display static images for prolonged periods,  
otherwise phosphor burn might appear on part of the panel.  
limited quantity of cells (fine pixel elements) that do not produce  
light, or that remain lit after they should have turned off.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
User Manual BDS4222B/V/R  
WHERE IS SERVICE AVAILABLE?  
Warranty service is available in all countries where the product is  
officially distributed by Philips Consumers Electronics Europe. In  
countries where Philips Consumers Electronics Europe does not  
distribute the product, the local Philips service organization will attempt  
to provide service (although there may be a delay if the appropriate  
spare parts and technical manual(s) are not readily available).  
MAKE SURE YOU KEEP ...  
Please keep your sales receipt or other document showing proof of  
purchase. Attach it to this owner's manual and keep both nearby. Also  
keep the original box and packing material in case you need to return  
your product.  
BEFORE REQUESTING SERVICE ...  
Please check your owner's manual before requesting service.  
Adjustments of the controls discussed there may save you a service call.  
TO GET WARRANTY SERVICE,  
OR IF YOU HAVE QUESTIONS …  
Please contact Philips at one of the telephone numbers below:  
Austria ................................................................. 01 5465 75603  
Belgium .................................................................... 02 275 0701  
Cyprus ..........................................................................800 92256  
Denmark .................................................................. 35 25 87 61  
Finland ................................................................... 09 2290 1908  
France .................................................................... 03 8717 0033  
Germany ............................................................. 0696 698 4712  
Greece ........................................................... 00800 3122 1223  
Ireland ........................................................................ 1 601 1161  
Italy ......................................................................... 02 4827 1153  
Luxembourg .............................................................. 26 84 3000  
Netherlands ......................................................... 053 482 9800  
Norway ................................................................... 22 70 82 50  
Poland ............................................................... 00800 311 1338  
Portugal .................................................................. 800 831 363  
Spain ......................................................................... 917 456 246  
Sweden .................................................................... 08 632 0016  
Switzerland ........................................................... 02 2310 2116  
United Kingdom ................................................ 0207 949 0069  
Repair must be performed by an authorized service center or a factory  
service center. If you do not live near a factory service center, contact  
your dealer. If your dealer is an authorized service center, he will  
arrange repair.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Manual BDS4222B/V/R  
REMEMBER ...  
Please record the model and serial numbers found on the product  
below. Also, please fill out and mail your warranty registration card  
promptly.  
It will be easier for us to notify you if necessary.  
MODEL # _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  
SERIAL # _ _ _ _ _ _ _ _ _ _ _ _ _ _ _wo_ _ _  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Manual BDS4222B/V/R  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Manual BDS4222B/V/R  
11. LIMITED WARRANTY (USA)  
Two Year Free Labor  
Two Year Free Parts  
WHO IS COVERED?  
You must have proof of the date purchased to receive warranty service.  
A sales receipt or other document showing the date that you purchased  
the product is considered proof of purchase.  
WHAT IS COVERED?  
Warranty coverage begins the day you buy your product. For two years  
thereafter, all defective parts will be repaired or replaced and labor is  
free. After two years from the day of purchase, you pay for the  
replacement or repair of all parts, and for all labor charges. All parts,  
including repaired and replaced parts, are covered only for the original  
warranty period. When the warranty on the product expires, the  
warranty on all replaced and repaired parts also expires.  
WHAT IS EXCLUDED?  
Your warranty does not cover:  
■
labor charges for removal, installation or setup of the product,  
adjustment of customer controls on the product, and installation or  
repair of antenna systems outside of the product.  
■
product repair and/or part replacement because of misuse, accident,  
unauthorized repair or other cause not within the control of Philips  
Consumer Electronics North America.  
■
■
reception problems caused by signal conditions or cable or antenna  
systems outside the unit.  
a product that requires modification or adaptation to enable it to  
operate in any country other than the country for which it was  
designed, manufactured, approved and/or authorized, or repair of  
products damaged by these modifications.  
■
■
incidental or consequential damages resulting from the product.  
(Some states do not allow the exclusion of incidental or  
consequential damages, so the above exclusion may not apply to you.  
This includes, but is not limited to, prerecorded material, whether  
copyrighted or not copyrighted.)  
modifications or adaptations to enable the product to operate in any  
country other than the country for which it was designed,  
manufactured, approved and/or authorized, or the repair of products  
damaged by these modifications.  
■
■
■
normal wear and tear (decreased light output of PDP module) over  
the product's lifetime.  
phosphor burn. Do not display static images for prolonged periods,  
otherwise phosphor burn might appear on part of the panel.  
limited quantity of cells (fine pixel elements) that do not produce  
light, or that remain lit after they should have turned off.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
User Manual BDS4222B/V/R  
WHERE IS SERVICE AVAILABLE?  
Warranty service is available in all countries where the product is  
officially distributed by Philips Consumers Electronics North America. In  
countries where Philips Consumers Electronics North America does not  
distribute the product, the local Philips service organization will attempt  
to provide service (although there may be a delay if the appropriate  
spare parts and technical manual(s) are not readily available).  
MAKE SURE YOU KEEP ...  
Please keep your sales receipt or other document showing proof of  
purchase. Attach it to this owner's manual and keep both nearby. Also  
keep the original box and packing material in case you need to return  
your product.  
BEFORE REQUESTING SERVICE ...  
Please check your owner's manual before requesting service.  
Adjustments of the controls discussed there may save you a service call.  
TO GET WARRANTY SERVICE U.S.A.,  
PUERTO RICO OR US VIRGIN ISLANDS ...  
Please contact Philips at:  
1-877-835-1838  
or an authorized service center to arrange repair. (In U.S.A., Puerto Rico  
and U.S.Virgin Islands, all implied warranties, including implied warranties  
of merchantability and fitness for a particular purpose, are limited in  
duration to the duration of this express warranty. But, because some  
states do not allow limitations on how long an implied warranty may last,  
this limitation may not apply to you.)  
TO GET WARRANTY SERVICE IN CANADA ...  
Please contact Philips at:  
800-661-6162 (French Speaking) (within Canada only)  
800-531-0039 (English Speaking)  
(In Canada, this warranty is given in lieu of all other warranties.  
No other warranties are expressed or implied, including any implied  
warranties of merchantability or fitness for a particular purpose. Philips  
is not liable under any circumstances for any direct, indirect, special,  
incidental or consequential damages, howsoever incurred, even if  
notified of the possibility of such damages.)  
REMEMBER ...  
Please record the model and serial numbers found on the product  
below. Also, please fill out and  
mail your warranty registration card promptly. It will be easier for us to  
notify you if necessary.  
MODEL # _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  
SERIAL # _ _ _ _ _ _ _ _ _ _ _ _ _ _ _wo_ _ _  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Peavey Music Mixer PV 8 User Manual
Peavey Portable Speaker SP 118X User Manual
Peavey Speaker 2 User Manual
Pelco DVR DX8UP 512MBRAM User Manual
Philips Baby Monitor SCD470 User Manual
Philips MP3 Docking Station DC156 37B User Manual
Philips Projection Television 46PP9302 User Manual
Pitco Frialator Pasta Maker and RSE14 User Manual
ProForm Home Gym PFEL54930 User Manual
Psion Teklogix Laptop Notebook Pro User Manual