Digital Surround Sound Receiver
FR-963
FR-994
•
FR-985
FR-995
•
FR-986
FR-996
Audio
•
•
Read this manual first!
Return
Congratulations on purchasing this Philips product.
We’ve included everything you need to get started.
If you have any problems, Philips Representatives can
help you get the most from your new product by explaining:
• Hookups,
yourWarranty
Registration Card
within 10 days
Y
• FirstTime Setup, and
• Feature Operation.
Do not attempt to return this product to the store.
For fast help, call us first!
1-800-531-0039
Thank you for making Philips a part of your home!
Download from Www.Somanuals.com. All Manuals Search And Download.
English ....................................................2
Français.................................................28
Español .................................................53
Canada
English: This digital apparatus does not exceed the Class B
limits for radio noise emissions from digital apparatus as set
out in the Radio Interference Regulations of the Canadian
Department of Communications.
Français : Cet appareil numérique n'émet pas de bruits
radioélectriques dépassant les limites applicables aux
appareils numériques de Classe B prescrites dans le
Règlement sur le Brouillage Radioélectrique édicté par le
Ministère des Communications du Canada.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
11. Only use attachments/accessories specified by the
manufacturer.
12.
Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
13. Unplug this apparatus during lightning storms or
7. Do not block any ventilation openings. Install in
accordance with the manufacturer´s instructions.
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety
purpose of the polarized or
grounding-type plug. A polarized
plug has two blades with one
AC Polarized
Plug
15. Battery usage CAUTION – To prevent battery leakage
wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or
the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
which may result in bodily injury or damage to the unit:
•
•
Install all batteries correctly, + and - as marked on the unit.
Do not mix batteries (old and new or carbon and
alkaline, etc.).
•
Remove batteries when the unit is not used for a long time.
10. Protect the power cord from being walked on or
pinched, particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
EL 6475-E003: 01/6
Class II equipment symbol
This symbol indicates that the unit has a double
insulation system.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL INFORMATION
Safety instructions
Safety instructions......................................................................2 & 4
Scope of supply
This receiver is supplied including:
– a remote control
General information
Scope of supply..................................................................................5
Setup..................................................................................................5
Environmental information.................................................................5
Trademark acknowledgement............................................................5
– 2 batteries for the remote control, size AA
– a coaxial cable for audio connection with a DVD player
– a coaxial cable for the CINEMA LINK connection
(FR 985, FR 956, FR 995, FR 996 only)
– a loop antenna
Controls .................................................................................................6
Remote control
Remote control use............................................................................7
Remote control buttons .....................................................................8
Programming the universal remote control
– a wire antenna
– this instruction booklet
(FR 985, FR 986, FR 995, FR 996 only)...............................................9
Connectors..........................................................................................10
Setup
Connections
If you have stacked the components of your system, the
receiver must be on top. Place the receiver on a flat,
hard, stabile surface. Do not cover any vents and leave
50 cm (20 inches) above and 10 cm (4 inches) to the left
and right of the receiver clear for ventilation.
Analog audio connections ...............................................................11
Digital audio connections ................................................................11
System control bus, CINEMA LINK .................................................12
Video connections............................................................................12
Power ...............................................................................................13
Speaker connections........................................................................13
TV as the center speaker.................................................................13
Antenna connections .......................................................................13
For good reception the loop antenna should not be placed on
top of or beneath VCRs, CD recorders, DVD players, TVs and
other radiation sources.
System setup
Positioning the speakers..................................................................14
Speaker setup and testing...............................................................14
Power handling ................................................................................14
Headphones .....................................................................................14
Maintenance....................................................................................14
Receiver adjustment ........................................................................15
Environmental information
All redundant packing material has been omitted. We have
tried to make the packaging easy to separate into three single
materials: cardboard (box), polystyrene foam (buffer) and
polyethylene (bags, protective foam sheet).
Display.................................................................................................16
Menus
Receiver menu ...........................................................................17–18
TV menu ...........................................................................................18
Activating CINEMA LINK .................................................................18
Your set consists of materials which can be recycled if
disassembled by a specialized company. Please observe the
local regulations regarding the disposal of packing materials,
dead batteries and old equipment.
Source selection
SOURCE SELECT...............................................................................19
6 CHANNEL-DVD/SACD INPUT selection .......................................19
Reassigning a source selection.......................................................19
Using one source selection for two or more appliances ................19
About 6 CHANNEL-DVD/SACD INPUT ............................................19
®
As an ENERGY STAR partner, Philips has determined
Playback, recording
®
that this product meets the ENERGY STAR
Playing a source...............................................................................20
Adjusting the sound.........................................................................20
Recording from a source..................................................................20
Recording from the digital output ...................................................20
guidelines for energy efficiency.
Trademark acknowledgement
Surround sound
About surround sound......................................................................21
Switching surround sound ...............................................................21
Surround sound settings..................................................................22
Manufactured under license from Dolby Laboratories. “DOLBY”,
“DOLBY DIGITAL”, “PRO LOGIC” and the double-D symbol 2
are trademarks of Dolby Laboratories. Confidential unpublished
works. © 1992–1997 Dolby Laboratories. All rights reserved.
Tuner
Tuning to radio stations ...................................................................23
Switching FM sensitivity .................................................................23
Storing radio stations ......................................................................23
Tuning to stored radio stations........................................................24
Resorting stored radio stations .......................................................24
Naming radio stations .....................................................................24
Clearing station names....................................................................24
“DTS” and “DTS Digital Surround” are trademarks of Digital
Theater Systems, Inc. Copyright 1996 Theater Systems, Inc.
All Rights Reserved.
Technical data
Receiver............................................................................................25
Troubleshooting
Warning............................................................................................26
Troubleshooting................................................................................26
Limited warranty
Limited warranty..............................................................................27
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS
1
2 3 4 5 6
7
8
T
9
0
!
≤ £ ™ ¡ ) ( * & ^ % $
#
@
1 POWER / STANDBY.......Switches the receiver on and off.
2 CINEMA LINK ................Switches on and off the system
control bus between the receiver
$ ENTER / OK.....................Confirms selected menu values.
% TUNER PRESET X MENU NAVIGATOR
TUNER: switches to the next and
previous stored radio station.
and the TV.
MENU: moves upwards and
downwards.
3 ..........................................Sensor for the infrared remote
control.
^ 1 PREV. / EXIT
TUNER: searches radio stations.
MENU: switches to the previous
menu level.
4 3D SURROUND ..............Control light for virtual
3D surround
(FR 963, FR 985, FR 986 only).
& SETUP MENU ................Switches the menu on and off.
* SENS. ..............................Switches between low and high
tuner sensitivity.
( DISPLAY..........................Switches the brightness of the
display.
VIRTUAL..........................Control light for virtual surround
(FR 994, FR 995, FR 996 only).
5 HALL................................Control light for HALL.
6 ..........................................Display
7 SOURCE SELECT............Selects the different audio and
video connectors.
) TUNER BAND ................Switches the wavebands of the
tuner.
Reactivates the receiver from
standby.
¡ NAME/FREQUENCY......Switches between name and
frequency display.
™ SURR. MODE..................Switches through the different
speaker configurations.
£ 3D SURROUND ..............Switches virtual 3D surround on
and off (FR 963, FR 985, FR 986
8 VOLUME..........................Increases and decreases the
volume level.
9 FRONT AV.......................Selects the FRONT AV / GAME
input (FR 995, FR 996 only).
0 TREBLE............................Adjusts the treble when used in
combination with VOLUME.
only).
VIRTUAL MODE.............Scrolls through the different
virtual surround sound modes
! BASS...............................Adjusts the bass when used in
combination with VOLUME.
(FR 994, FR 995, FR 996 only).
≤ SURROUND ON/OFF .....Switches between the last
selected surround mode and
@ LOUDNESS.....................Switches LOUDNESS on and off.
# NEXT 2 ...........................TUNER: searches radio stations.
MENU: switches to the next
stereo.
menu level.
1
2 3 4 5 6
7
FR 963 only:
E
M
LU
O
V
R
O
T
C
LE
E
S
E
C
R
U
O
S
D
DV
O
N
O
PH
ER
N
TU
CD
R
E
T
N
E
C
D
N
U
O
S
A
M
E
IN
C
L
A
IT
IG
D
LL
A
H
K
IN
L
L
A
A
M
TU
VIR
E
IN
C
CDR
/
TAPE
8
ANDBY
ST
ER
/
W
PO
TV
VCR
U
T
SA
N
E
A
M
R
E
L
B
E
O
R
T
A
E
E
R
T
N
E
IG
V
U
R
T
P
N
T
S
S
S
A
B
EXT
N
S
S
E
N
D
U
O
L
.
/
EXIT
PREV
TER / OK
SENS.
TUNER BAND
ENU
M
0
!
SETUP
Y
DISPLA
SURR. MODE
Y
C
N
E
U
Q
SURROUND
ON/OFF
E
R
/F
E
M
A
N
3D SURROUND
NES
PHO
≤ £ ™ ¡ ) ( * & ^ % $
#
@
6
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
Remote control use
Open the battery compartment
of the remote control and insert
2 alkaline batteries, type AA
(R06, UM-3).
MUTE
H
2
Remove batteries if they are
dead or if the remote control
will not be used for a long time.
PHONO
TUNER
VCR
CD
CDR/TAPE
TV
SAT
DVD
Batteries contain chemical substances, so they should
be disposed of properly.
1
4
2
5
8
0
3
6
The buttons on the remote control work the same way as the
corresponding ones on the receiver.
Important!
9
7
You have to press a source button for longer than 1 second to
switch the sound source on the receiver. Pressing a source
button for less than 1 second will only switch the remote
control to use the commands for the selected product.
CINEMA GO
CABLE BOX
GUIDE
MENU
OK
The remote control remains tuned to the selected source until
another source button on the remote control is pressed. This
enables you to operate additional sources (i. e. winding a
tape) without changing the source on the receiver.
É
TV
A
A
NEWS/TA
Ç
CHANNEL/TRACK LOUDNESS SOUND
CHANNEL/TRACK LOUDNESS SUBW.
ON/
í
ë
í
ë
OFF
REC
CANCEL
FR.D.
INDEX
T-C
REC
CANCEL
FR.D.
INDEX
AUDIO
AUDIO
T-C
Å
Å
DVD
NIGHT 3D SURR. SURROUND
DVD
NIGHT VIRTUAL SURROUND
ON/
OFF
ON/
MODE
DISC
DISC
OFF
REAR
REAR
SURROUND
SURROUND
+
+
MODE
+
+
MODE
SUB WOOFER
SUB WOOFER
TEST TONE
TEST TONE
-
-
-
-
CHANNEL
CHANNEL
FR 963, FR 985, FR 986
FR 994, FR 995, FR 996
7
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
í
ë
CHANNEL/TRACK ...Selects the previous preset tuner
station.
Remote control buttons
H MUTE .....................Mutes the sound of the receiver in all
modes, except TV.
VCR: Rewinds the tape.
CD, CDR, DVD: Selects the previous
track.
Mutes the sound of your Philips TV set
if your remote control is in TV mode.
TV: Selects the previous channel.
2 ................................Switches the source selected on your
remote control (e.g. VCR, TV) to standby.
When pressed longer than 2 seconds,
CHANNEL/TRACK ...Selects the next preset tuner station.
VCR: Fast forwards the tape.
CD, CDR, DVD: Selects the next track.
TV: Selects the next channel.
the receiver switches to standby.
PHONO, TUNER, CD,
LOUDNESS ...................Switches LOUDNESS on and off.
CDR/TAPE, TV,
SOUND....................Scrolls through the different smart
sounds (FR 963, FR 985, FR 986 only).
VCR, SAT, DVD..............Switches the remote control to the
commands of the different products.
Selects the sources if pressed longer
than 1 second. SAT only works with
digital satellite receivers.
SUBW. ON/OFF ............Switches the subwoofer on and off
(FR 994, FR 995, FR 996 only).
REC, DVD AUDIO..........CDR, VCR: Starts recording.
DVD: Switches audio tracks.
Reactivates the receiver from standby.
CANCEL, DVD ...........CD, CDR, SAT, VCR: Clears a
program, cancels selections.
1–0................................Keys in numbers for tracks, stations or
frequencies. Numbers consisting of
two figures must be keyed in within
2 seconds.
DVD: Switches the view angle.
FR.D., DVD Å .............TUNER: Switches to FREQUENCY
DIRECT.
CD, CDR, VCR, DVD: Pauses
playback.
CINEMA GO..........Activates CINEMA LINK on the TV.
CABLE BOX...................(USA only) Switches the remote
control to the cable box codes.
INDEX, DVD T-C............VCR: Switches the index search on
MENU GUIDE ..............TUNER: Switches the receiver menu
and off.
on and off.
DVD, TV: Switches the DVD/TV menu
on and off.
SAT: Switches the themes on and off.
DVD: Switches between title and
chapter.
OK.................................Confirms menu options.
DISC..............................CD-, CDR-, DVD-Changers:
Arrow buttons ..............TUNER: Moves in the menus.
Right/left arrows are tuning up/down.
CD, CDR: Left/right arrows are
Switches to the next disc.
NIGHT...........................Switches NIGHT MODE on and off.
3D SURR.......................Switches virtual 3D surround on and off
(FR 963, FR 985, FR 986 only).
searching backwards/forwards,
up/down arrows are selecting the
next/previous track.
VIRTUAL MODE............Scrolls through the different virtual
surround sound modes
+A...........................Increases the receiver volume.
(FR 994, FR 995, FR 996 only).
-A...........................Decreases the receiver volume.
SURROUND ON/OFF ....Switches SURROUND SOUND on and off.
i
NEWS/TA.................TUNER: Without function.
TV: Switches teletext on and off.
SAT: Switches the information text on
and off.
+/- SUBWOOFER...Increases/decreases the subwoofer
volume.
+/- REAR ...............Increases/decreases the volume of the
rear speakers. While test tone is on,
the volume of the speakers you are
hearing can be increased/decreased
with these buttons.
ÉATV ......................Increases the TV volume.
CD, CDR, VCR, DVD: Starts playback.
ÇATV ......................Decreases the TV volume.
CD, CDR, VCR, DVD: Stops playback.
SURROUND MODE.......Scrolls through the different surround
modes.
TEST TONE ...................Switches the test tone on and off.
While test tone is on, the volume of
the speakers you are hearing can be
increased/decreased with
+/- REAR.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
Once you have found and tested the codes for your various
appliances, you may want to write them down here.
Programming the universal remote control
(FR 985, FR 986, FR 995, FR 996 only)
You can identify the universal remote control by the
inscription Multibrand/Universal.
PHONO..........................................
TUNER...........................................
CD .................................................
CDR/TAPE .....................................
TV..................................................
VCR ...............................................
SAT................................................
DVD...............................................
CABLE BOX ...................................
The universal remote control must be programmed to use the
codes for your appliances of different brands. This is done by
keying in a 4-digit code or by scanning the codes until the
correct one is found. We recommend to using the 4-digit
code. This method is faster and more reliable. The code
scanning method should be used only if you cannot find the
code for one of your appliances. The codes are listed at the
end of this book.
Important!
Use the remote control buttons for programming, not the
buttons of the receiver or other appliances.
Programming with the 4-digit code
1 Keep the source button for the appliance which should be
controlled and2 pressed for 3 seconds.
Resetting the remote control
1 Keep one of the source buttons and 2 pressed for
3 seconds.
2 Key in the 4-digit code for the appliance (codetable at the
end of the booklet).
2 Key in the 3-digit code 981.
yThe remote control is now reset to all its original Philips
Notes: – If more than 4 digits are entered, the remote control
will recognize only the ones keyed in first.
– If you do not key in a code within 30 seconds the
remote control will switch off the programming
function without changing the code.
codes.
– To program a new appliance, simply overwrite the
old code by entering a new one.
Scanning the codetable
1 Switch on the appliance which should be controlled.
2 Keep the source button for the appliance which should be
controlled and2 pressed for 3 seconds.
3 Press and release 2 again.
yThe remote control sends the codes for channel up or
standby (depending on the selected source) for one
brand after the other.
4 As soon as the appliance reacts – switches to the next
channel or to standby – press 2 to confirm the code.
yThe identified code will be used.
• If the set does not react within 2 minutes, the code for this
appliance is not stored in the remote control. The code of
the remote control will remain unchanged.
Note: When taking out the batteries of the remote control for
more than 1 minute the codes must be reprogrammed.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTORS
™ £ ≤ ∞ § ≥ •ª º ⁄
¤
‹
TLET
AC OU
120V
A
N
N
TE
N
A
-
60 Hz
FRONT
SPEAKERS
Ω
≥
6
EACH SPEAKER
.
D
N
G
O
N
O
PH
P
O
O
L
M
A
/
O
IN
O
DE
S
I
L
IO
T
A
IT
IG
U
IN
D
O
T
CAUTIONO
IC
IS
E
A
CINEMA
LINK
ID
S
K
C
-V
D
H
S
N
A
R
¡
)
C
V
R
O
T
C
O
N
U
R
L
E
T
/
O
VC
E
O
F
D
O
K
N
O
O
E
P
M
R
2
IN
L
A
D
P
TIC
DV
O
L
R
120W/1A MAX. SWITCHED
RISQUE DE CHOC ELECTRIQUE
AS OUVRIR
R
FE
O
O
NE P
W
CENTER
B
U
S
T
U
O
VIS
A
T
U
-O
IN
IN
E
R
P
L
1
IN
T
A
A
IC
S
PT
O
UT
E
IN
O
R
Designed and developed by Philips in the European
unity.
nder license from Dolby Laboratories.
D
N
S
R
R
C
U
O
C
V
R
m
R
U
S
S
Com
M
AL“, ”PRO LOGIC“ and the
IT
DIG
Y
L/
T
N
UT
LA
E
U
P
R
N
P
M
O
E
N
K
A
A
anufactured
”DOLBY“, ”DOLBY
u
H
E
arks of Dolby Laboratories.
orks.
double-D Symbol are tradem
Confidential Unpublished
©1992–1997 Dolby Laboratories. All rights reserved.
P
6
C
R
E
T
U
VD
D
T
N
E
IN
D
C
V
D
IN
.
W
T
B
U
-O
E
S
R
P
ER
T
CEN
E
W
P
A
/T
R
D
C
T
U
S
/
O
D
C
IN
anufactured under license from Digital Theater
M
IO
D
U
s,
System s. Inc. US Pat. No. 5,451,942 and other world-
ide patents issued and pending. ”DTS“ and ”DTS
w
X
A
A
O
C
O
T
A
T
U
C
V
t
1996 Digital Theater System
Digital Surround“ are tradem arks of Digital Theater
System s, Inc. Copyrigh
V
T
O
N
O
PH
L
Inc. All Rights Reserved.
ON
FR
R
.
RR
Ω
(
*
&
2
1
≥
6
X
IN
SU
A
O
C
C
PEAKER
S
EACH
L
R
OUT
REC
IN
PLA
IN
Y
X
IN
A
O
IN
OUT
REC
IN
PLA
IN
Y
IN
^ %$#@!0987 6 5 4
3
2
1
Connectors
6.3 mm headphone jack
at the front.
Connectors name
1 PHONES
Connect to:
A headphone with a 6.3 mm plug.
Audio and video inputs
at the front
2 FRONT AV / GAME
Left and right audio out jacks of appliances such as video cameras
and game consoles.
Video out jacks of appliances such as video cameras and game consoles.
Right and left front speaker.
(FR 995, FR 996 only).
3 FRONT AV / GAME
4 R, L
FRONT SPEAKERS
5 CENTER
Center speaker.
SURROUND SPEAKERS
AUDIO IN/OUT
6 R, L
Right and left surround speaker.
Input of a CD recorder or a tape deck.
Output of a CD recorder or a tape deck.
Output of a CD player.
8 CDR/TAPE OUT
9 CDR/TAPE IN
0 CD IN
! SAT IN
Output of a satellite system.
@ VCR OUT
# VCR IN
Input of a video recorder.
Output of a video recorder.
$ TV IN
Output of a TV.
% PHONO IN
¡ PHONO GND f
Output of a turntable with MM coil.
Ground cable of a turntable.
6 CHANNEL / DVD INPUT ^ 6 CHANNEL / DVD INPUT 6 channel output of appliances such as DVD or laserdisc players.
DIGITAL AUDIO IN/OUT
& COAX 1 IN
Coaxial output of digital appliances (default input for source DVD).
(FR 994, FR 995, FR 996 only)
& COAX OUT
Coaxial input of digital appliances such as CD recorders or MD recorders
(FR 963, FR 985, FR 986 only).
* COAX 2 IN
Coaxial output of digital appliances.
( COAX OUT
Coaxial input of digital appliances such as CD recorders or MD recorders
(FR 994, FR 995, FR 996 only).
( COAX 1 IN
) OPTICAL IN
Coaxial output of digital appliances (FR 963, FR 985, FR 986 only).
Optical output of digital appliances such as DVD players, CD players,
CD recorders or MD players (FR 963, FR 985, FR 986, FR 994 only).
Optical output of digital appliances such as DVD players, CD players,
CD recorders or MD players (FR 995, FR 996 only).
S-Video inputs/outputs of video appliances for better video quality
(FR 994, FR 995, FR 996 only).
) OPTICAL 1 (2) IN
VIDEO IN/OUT
™ S-VIDEO
£ DVD IN
Output of a DVD player.
≤ MON OUT
§ VCR IN
Input of a monitor (e. g. the TV).
Output of a video recorder.
≥ VCR OUT
ª SAT IN
Input of a video recorder (for recording).
Output of a satellite system.
Antenna connectors
Preamplified outputs
∞ AM LOOP
• FM 300 Ω
7 CENTER PRE-OUT
Frame antenna supplied.
Wire antenna supplied or exterior antenna.
Input of a TV when it is used as the center speaker (only possible
when the CINEMA LINK system bus is connected).
º SUBWOOFER PRE-OUT Input of a powered subwoofer.
System control bus
Power outlets
⁄ CINEMA LINK
¤ AC OUTLET
System control bus jacks of a Philips TV with CINEMA LINK.
Supplies same voltage as mains. Up to 120 W/1A total permitted load.
(not on all versions)
Power cord
‹
After all other connections have been made, connect the
power cord to the wall outlet.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Analog audio connections
There are analog and digital connectors available on some
appliances. If possible use the digital connection; usually this
will result in better sound quality. See “Reassigning a source
selection” on how to use the digital connectors of the receiver.
consequently cannot be decoded and played back inside most
CD, LD, or DVD players. For this reason, when DTS-encoded
software is played back through the analog outputs of the CD,
LD, or DVD player, excessive noise will be exhibited. To avoid
possible damage to the audio system, proper precautions
should be taken by the customer if the analog outputs are
connected directly to the receiver.
Because of a different kind of output signal, the use of Dolby
Digital Laserdisc requires an optional AC-3 RF demodulator.
DTS Digital SurroundTM is a discrete 5.1-channel digital audio
format available on CD, LD, and DVD software which
To enjoy DTS Digital SurroundTM playback, a DTS-compatible
player has to be connected to one of the digital inputs of the
receiver.
ANTENNA
FM 300
Ω
PHONO GND.
AM LOOP
DVD
DIGITAL
AUDIO
IN/ OUT
FRONT
VIDEO IN/ OUT
S-VIDEO
VCR
SPEAKERS
OPTICAL
2
IN
MON
VCR
OUT
SAT
EACH SPEAKER
≥
6
Ω
CINEMA
LINK
OPTICAL
1
IN
IN
IN
6
CHANNEL /
DVD INPUT
SUBWOOFER
DVD
IN
MON
OUT
OUT
REC
SAT
IN
VCR
PLAY
CENTER
SUBW.
FRONT
PRE-OUT
CENTER
R
L
CAUTION
COAX
OUT
RISK OF ELECTRIC SHOCK
DO NOT OPEN
MONITOR / TV
AUDIO
OUT
AUDIO IN/ OUT
SAT
CENTER
PRE-OUT
RISQUE DE CHOC ELECTRIQUE
COAX
IN
2
1
SURR.
PHONO
TV
VCR
CD
CDR/TPE
SURROUND
SPEAKERS
AVIS
NE PAS OUVRIR
Designed and developed by Philips in the European
L
R
Com
m
unity.
Manufactured under license from Dolby Laboratories.
COAX
IN
”DOLBY“, ”DOLBY DIGITAL“, ”PRO LOGIC“ and the
d o u b le -D S ym b o l
a re tra d e m a rks o f Do lb y
Unpublished Works.
Confide2ntial
Laboratories.
©1992–1997 Dolby Laboratories. All rights reserved.
Manufactured under license from Digital Theater
System s. Inc. US Pat. No. 5,451,942 and other world-
wide patents issued and pending. ”DTS“ and ”DTS
Digital Surround“ are tradem arks of Digital Theater
System s, Inc. Copyright 1996 Digital Theater System s,
Inc. All Rights Reserved.
R
L
IN
IN
IN
PLAY
OUT
REC
IN
IN
IN
PLAY
OUT
REC
EACH SPEAKER
≥
6
Ω
TURNTABLE
CD RECORDER
IN
POWERED
SUBWOOFER
OUT
VCR
AUDIO OUT
CD PLAYER
AUDIO IN
SAT RECEIVER
Digital audio connections
FR 963, FR 985, FR 986:
FR 994, FR 995, FR 996:
CD RECORDER
CD PLAYER
DVD PLAYER
CD PLAYER
ANTENNA
FM 300
Ω
ANTENNA
PHONO GND.
FM 300
Ω
PHONO GND.
AM LOOP
DVD
DIGITAL
AUDIO
IN/ OUT
AM LOOP
VIDEO IN/ OUT
S-VIDEO
VCR
DIGITAL
AUDIO
IN/ OUT
OPTICAL
2
IN
MON
VCR
SAT
OPTICAL IN
OPTICAL
1
IN
IN
IN
OUT
6
CHANNEL
/
6
CHANNEL /
DVD INPUT
DVD INPUT
VIDEO IN/ OUT
VCR
DVD
IN
MON
OUT
OUT
REC
SAT
IN
VCR
PLAY
CENTER
SUBW.
DVD
MON
SAT
IN
COAX
OUT
COAX
IN
1
2
CENTER
SURR.
SUBW.
FRONT
IN
OUT
REC
AUDIO IN/ OUT
SAT
IN
OUT
TV
PLAY
COAX
IN
2
SURR.
FRONT
PHONO
TV
VCR
AUDIO IN/ OUT
VCR SAT
COAX
IN
PHONO
L
R
L
R
COAX
IN
1
COAX
OUT
IN
IN
IN
PLAY
OUT
REC
IN
IN
IN
IN
PLAY
OUT
REC
IN
DVD PLAYER
CD RECORDER
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
System control bus, CINEMA LINK
If the receiver and your Philips TV (or even better in addition
a Philips VCR or DVD player) with Cinemalink are connected
with the CINEMA LINK system bus control, some extra
system benefits are offered:
– Upon starting a source, the system will automatically
switch to that input.
– You may control the system via the TV screen. Depending
on the language of the TV, this can be done in your
preferred language.
CEN
TER
IN
TV
VID
EO
IN
AU
DIO
OU
T
CIN
EM
A LIN
K
– The TV can function as the center speaker of your system,
making a separate center speaker unnecessary.
(The cable A has to be purchased separately.)
– By pressing the standby button on the remote control, you
can switch the complete system to standby.
DVD PLAYER
DIGIT
OUT
CINEM
A LINK
A
L
VID
EO
OU
T
A
ANTENNA
FM 300
Ω
PHONO GND.
AM LOOP
DIGITAL
AUDIO
IN/ OUT
FRONT
VIDEO IN/ OUT
S-VIDEO
VCR
SPEAKERS
OPTICAL
2
IN
DVD
MON
VCR
OUT
SAT
EACH SPEAKER
≥
6
Ω
CINEMA
LINK
OPTICAL
1
IN
IN
IN
6
CHANNEL
/
DVD INPUT
SUBWOOFER
DVD
IN
MON
OUT
OUT
REC
SAT
IN
V
PLAY
CENTER
SUBW
PRE-OUT
CENTER
R
L
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
COAX
OUT
VCR
AUDIO IN/ OUT
SAT
CENTER
PRE-OUT
RISQUE DE CHOC ELECTRIQUE
COAX
IN
2
SURR.
FRONT
PHONO
TV
VCR
CD
CDR/TAPE
SURROUND
SPEAKERS
AVIS
NE PAS OUVRIR
VID
EO
Designed and developed by Philips in the European
L
R
Com
m
unity.
AUDIO
OUT/PLA
Manufactured under license from Dolby Laboratories.
COAX
IN
1
IN/REC
CINEM
A LINK
”DOLBY“, ”DOLBY DIGITAL“, ”PRO LOGIC“ and the
OUT
PLA
Y
d o u b le -D S ym b o l
Confide2ntial
Laboratories.
a re tra d e m a rks o f Do lb y
Unpublished Works.
Y
©1992–1997 Dolby Laboratories. All rights reserved.
Manufactured under license from Digital Theater
System s. Inc. US Pat. No. 5,451,942 and other world-
wide patents issued and pending. ”DTS“ and ”DTS
Digital Surround“ are tradem arks of Digital Theater
System s, Inc. Copyright 1996 Digital Theater System s,
Inc. All Rights Reserved.
L
IN
R
L
IN
IN
IN
PLAY
OUT
REC
IN
IN
IN
OUT
REC
REC
PLAY
EACH SPEAKER
≥
6
Ω
R
Video connections
If your video products have a S-video connector, using this
connector will provide better video quality
(FR 994, FR 995, FR 996 only).
MONITOR / TV
DVD PLAYER
ANTENNA
FM 300
Ω
PHONO GND.
AM LOOP
DVD
DIGITAL
AUDIO
IN/ OUT
FRONT
VIDEO IN/ OUT
S-VIDEO
VCR
SPEAKERS
OPTICAL
2
IN
EACH SPEAKER
≥
6
Ω
MON
VCR
OUT
SAT
CINEMA
LINK
OPTICAL
1
IN
IN
IN
6
CHANNEL /
DVD INPUT
SUBWOOFER
DVD
IN
MON
OUT
OUT
REC
SAT
IN
VCR
PLAY
CENTER
SUBW.
FRONT
PRE-OUT
CENTER
R
L
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
COAX
OUT
AUDIO IN/ OUT
SAT
CENTER
PRE-OUT
RISQUE DE CHOC ELECTRIQUE
COAX
IN
2
1
SURR.
PHONO
TV
VR
CD
CDR/TAPE
SURROUND
SPEAKERS
AVIS
NE PAS OUVRIR
Designed and developed by Philips in the European
Com m unity.
L
R
Manufactured under license from Dolby Laboratories.
”DOLBY“, ”DOLBY DIGITAL“, ”PRO LOGIC“ and the
COAX
IN
d o u b le -D S ym b o l
a re tra d e m a rks o f Do lb y
Unpublished Works.
Confide2ntial
Laboratories.
©1992–1997 Dolby Laboratories. All rights reserved.
Manufactured under license from Digital Theater
System s. Inc. US Pat. No. 5,451,942 and other world-
wide patents issued and pending. ”DTS“ and ”DTS
Digital Surround“ are tradem arks of Digital Theater
System s, Inc. Copyright 1996 Digital Theater System s,
Inc. All Rights Reserved.
R
L
IN
IN
IN
PLAY
OUT
REC
IN
IN
IN
PLAY
OUT
REC
EACH SPEAKER
≥
6
Ω
VCR
VIDEO OUT
VIDEO IN
SAT RECEIVER
12
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Power
Antenna connections
The type plate is located on the rear of the receiver.
AM (MW) antenna
The loop antenna supplied is for indoor use only. Position the
antenna as far away as possible from the receiver, a TV, the
cables, a DVD player, a VCR and other radiation sources.
1 Check whether the power voltage as shown on the type
plate corresponds to your local power voltage. If it does
not, consult your dealer or service organization.
1
Fit the plug of the frame antenna to AM LOOP as shown below.
2 Connect the power cord to the power outlet.
2 Turn the antenna for optimum reception.
To disconnect the unit from the power completely, remove the
power plug from the power outlet.
ANTENNA
Speaker connections
Some of the speaker connections on the receiver are screw
connectors and some are click-fit connectors. Use them as
shown below.
O
LO
AM
FM antenna
The wire antenna supplied can be used only to receive nearby
stations. For better reception we recommend using a cable
antenna system or an outdoor antenna.
1 Open the FM 300 Ω click-fits by pushing the lever down as
shown below.
1
1
2
2
3
3
2 Insert each wire of the antenna into one hole.
3 Close the click-fits using the lever.
m
8 m
4
Move the antenna in different positions for optimum reception.
1 Always connect the colored (or marked) wire to the colored
terminal and the black (or unmarked) wire to the black
terminal.
2 Connect:
– Left front speaker to L (red and black)
– Right front speaker to R (red and black)
– Center speaker to CENTER (blue and black)
– Left surround speaker to SURROUND L (grey and black)
– Right surround speaker to SURROUND R (grey and black)
m
1
2
3
8 m
The unit complies with the FCC-Rules, Part 15.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received,
including interference that may cause undesired
operation.
TV as the center speaker
You may use your Philips TV with CINEMA LINK as the center
speaker. For TV’s with cinch connectors, additional cinch
cables are needed. These cables must be connected to the
blue CENTER PRE-OUT connector on the back. Look into the
instruction manual of your TV on how to use it as the center
speaker.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM SETUP
CENTER
Speaker setup and testing
The relative volume of the speakers must be adjusted for
optimal surround sound. You should be at your usual listening
position when adjusting the speaker volume. See “Receiver
menu” on how to unit up the receiver for the used speakers.
Ideally, the volume in the listening position should be the
same from all speakers.
RIGHT
LEFT
SURROUND
(REAR)
SURROUND
(REAR)
1 Press POWER / STANDBY to switch on the receiver.
RIGHT
LEFT
2 Press TEST TONE on the remote control.
y A test tone coming from the different speakers, except
the subwoofer, is heard.
Positioning the speakers
General hints for positioning
Avoid positioning the speakers in a corner or on the floor as
this will boost the bass tones too much. Placing the speakers
behind curtains, furniture, etc. will reduce the treble
response. The listener should always be able to ”see” the
speakers.
3 Press +/- REAR on the remote control to
increase/decrease the volume of the actual speaker. The
best result is achieved when all speakers have equal
volume in the listening position.
4 Press TEST TONE on the remote control.
Each room has different acoustic characteristics and the
positioning possibilities often are limited. You can find the
best position for your speakers by referring to the picture
above.
y The test tone stops.
Note: If you are not completely satisfied with the volume
settings, we recommend making minor adjustments to
them during surround sound playback.
As a minimum we recommend 5 speakers (2 front, a center,
2 surround) for good surround sound. It is possible to
reproduce some kind of surround sound with fewer speakers.
This is done by redirecting the signals which are foreseen for
the missing speakers to the existing ones. See “Menus” on
how to set up the receiver correctly for the number and size
of the speakers used.
Power handling
If the receiver is used at very high power it can produce
distortions which may damage your speakers seriously. If
distortions occur, reduce the volume and the tone controls to
a level where the sound is acceptable again.
To avoid overheating of the unit a safety circuit has
been built in. Therefore your set may disconnect under
extreme conditions. If this happens, switch the unit off
and let it cool down before reusing it. After having let
the set cool down switch the set on again and select
the desired source by turning SOURCE SELECT.
Positioning the front speakers
The front speakers should be placed to the right and left in
front of the listening position like usual stereo speakers.
Positioning the center speaker
The center speaker should be placed in the center between
the two front speakers, e. g. underneath or on top of the TV.
The best height for the center speaker is the height of the
listener’s ears (while seated).
Headphones
Connecting headphones to PHONES will switch off the
speakers. The receiver switches to STEREOand surround
sound will be reduced to a stereo signal which is reproducible
by standard headphones.
Positioning the surround speakers
The surround speakers should face each other and be in line
with, or slightly behind the listener.
Positioning the subwoofer
Disconnecting the headphones switches on the speakers
again. If you wish to enjoy surround sound again, switch the
receiver back to surround sound.
A subwoofer can be used to enhance the bass performance of
your system dramatically. The subwoofer can be positioned
anywhere in the room, because it is not possible to locate the
source of deep tones. Nevertheless, you should not place the
subwoofer in the middle of a room, since the bass could be
severely weakened. Do not place any object on the
subwoofer.
Maintenance
Clean the receiver with a soft,
slightly dampened, lint-free cloth. Do
not use any cleaning agents as they
may have a corrosive effect.
Do not expose the receiver to
humidity, rain, sand or excessive heat
(caused by heating equipment or
direct sunlight).
14
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM SETUP
Receiver adjustment
Once the number and position of loudspeakers has been
fixed, you can adjust the initial receiver settings for optimum
surround sound with the actual setup:
1 Set which speakers have been connected to the receiver
(see “Menus / SPEAKR SETUP”).
Note: The initial setting of your receiver is:
two front speakers left and right: present
(cannot be altered)
center speaker: present
two rear speakers: present
subwoofer: present
2 Select the size of the speakers (SMALLor LARGE)
(see “Menus / SPEAKR SIZES”).
Select SMALLif your speaker is able to reproduce low
notes down to at least 80–100 Hz.
Select LARGEif your speaker is able to reproduce low
notes down to at least 50 Hz.
(As a rule of thumb, a LARGEspeaker has a cone diameter
of at least 12 cms (5 inches).)
See the specification sheets of your loudspeakers.
Note: The initial setting of your receiver is:
FR 985, FR 986, FR 995, FR 996:
all speakers: LARGE
FR 963, FR 994:
all speakers: SMALL
3 Set the distance from the speakers to the listener’s position
(see “Menus / SPK DISTANCE”).
Note: The initial setting of your receiver is:
FR 985, FR 986, FR 995, FR 996:
all speakers: 10 feet (3 meters)
FR 963, FR 994:
front speakers, left and right: 13 feet (4 meters)
center speaker: 10 feet (3 meters)
rear speakers, left and right: 7 feet (2 meters)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY
Status lights
Display
The display of the receiver is divided into 4 sections, which
are to be used for the following:
Speaker diagram
Signs show you various settings and information about the
status of the receiver.
PRESET......................Tuner is tuned to a preset radio station.
SENS HI.....................Tuner is switched to high sensitivity.
SENS LO ..................Tuner is switched to low sensitivity.
CINEMA LINK ON ......CINEMA LINK is active
STEREO......................An FM station is being received in stereo.
SMART SOUND...........One of the preset sound settings of the
receiver is being used
A rectangle with a letter in it shows that a speaker has been
selected in the setup menu. However, the subwoofer indicator
will only light when a subwoofer signal is available. If only a
letter is shown, this speaker is not used and its sound is
being reproduced by the other speakers.
(FR 985, FR 986 only).
HALL..........................HALL effect is on.
.....virtual surround sound
SURROUND.................surround sound is reproduced
DIGITAL SURROUND ....digital surround sound is reproduced
L, R ...........................front left and right speaker
C...............................center speaker
ANA ..........................Analog input is being used for the playing
source.
NIGHT .......................NIGHT MODE is on.
COAX 1 ......................Coaxial digital input COAX 1 is being
used for the playing source.
COAX 2.....................Coaxial digital input COAX 2 is being
used for the playing source.
DOWNMIX.................Incoming multichannel signals are being
reduced to fewer output signals
SL, SR .......................surround speakers
SW............................subwoofer
Menu indication
(depending on the number of speakers).
OPT ...........................Optical digital input OPTICAL IN is being
used for the playing source
(FR 963, FR 985, FR 986, FR 994 only).
OPT 1 ........................Optical digital input OPTICAL 1 IN is
being used for the playing source
These signs show you if the menu is on or off and indicate in
which direction you may move.
(FR 995, FR 996 only).
OPT 2 .......................Optical digital input OPTICAL 2 IN is
being used for the playing source
(FR 995, FR 996 only).
LOUDNESS .................LOUDNESS is switched on.
MENU .......................Menu is on.
1..............................You may move backwards to the previous
menu topic using 1 PREV. / EXIT (“left”
key on the remote control).
3.............................You may move up in an option list using
X MENU NAVIGATOR (“up” key on the
remote control).
Information area
4.............................You may move down in an option list
using X MENU NAVIGATOR (“down” key
on the remote control).
2..............................You may move forward to the next menu
topic using NEXT 2 (“right” key on the
remote control).
This area is used for feedback of the receiver, tuner
frequencies, menu options, values and scrolling text
messages.
OK.............................You may confirm the displayed value.
0
GUIDE
MENU
OK
É
TV
A
A
16
Download from Www.Somanuals.com. All Manuals Search And Download.
MENUS
Note: When using the 6 CHANNEL / DVD INPUT the values
Receiver menu
below cannot be changed.
The receiver is equipped with a menu system. The menu is
used for the setup of the receiver. The different menu options
are related to each other in a logical way. Let’s assume you
have no center speaker connected, and so you switched
CENTER SPEAKRto NO. If you try to use VOL CENTER,
a message will be scrolled that this is not possible
(INSTALL CENTER SPEAKER).
* SPEAKR SETUP
Selects the used speakers.
SUBW PRESENT
Subwoofer present: yes/no
CENTER SPEAKR
Center speaker present: yes/no
REAR SPEAKER
Rear speakers present: yes/no
The menu always works the same way. Arrows in the display
show you the possible moving directions.
* SPEAKR SIZES
Chooses the speaker sizes of the used speakers, for
optimal sound reproduction. LARGEindicates a speaker
which can reproduce frequencies lower than 50 Hz. If
SUBW PRESENTis set to NO, FRONT SIZEcan only
be set to LARGE. If FRONT SIZEis set to SMALL,
CENTER SIZEcan only be set to SMALLand
consequently a subwoofer must be connected.
SUBW PRESENT(FR 963, FR 985, FR 986 only)
Subwoofer present: yes/no
1 Press SETUP MENU.
yMENU, and * EFFECTSis displayed.
• You can exit the menu at any time by pressing
SETUP MENU.
2 Turn X MENU NAVIGATOR until the desired option (or a
value) is displayed.
FRONT SIZE
Left and right front speakers: small/large
CENTER SIZE
3 Press NEXT 2 to choose the displayed option (or
ENTER / OK to confirm a value).
Center speaker: small/large
REAR SIZE
• You can leave any option (values remain unchanged) by
Rear speakers: small/large
pressing 1 PREV. / EXIT.
* SPK DISTANCE
Menu structure
Distance between the usual listening position and the
speakers. This defines the delay time for the surround sound.
DISTANCE L/ R
* EFFECTS
Switches sound effects.
Distance to front speakers: 1…10 m (3…30 ft)
DISTANCE CNTR
3D SURR(FR 963, FR 985, FR 986 only)
virtual 3D surround: 0…100 %
VIRT SURR(FR 994, FR 995, FR 996 only)
virtual surround: 0…100 %
Distance to center speaker: 1…10 m (3…30 ft)
DISTANCE REAR
Distance to rear speakers: 1…10 m (3…30 ft)
* VOL BALANCE
Adjusts the relative volume balance between the
connected speakers.
TEST TONE
Test tone: on/off
VOL FRONT-L
Volume front left speaker: –50…+50
VOL FRONT-R
Volume front right speaker: –50…+50
VOL CENTER
Volume center speaker: –50…+50
VOL REAR-L
Volume rear left speaker: –50…+50
VOL REAR-R
Volume rear right speaker: –50…+50
VOL SUBWOOFER
Volume subwoofer: –50…+50
17
Download from Www.Somanuals.com. All Manuals Search And Download.
MENUS
* SELECT INPUT
TV menu
Assigns the audio input connectors to the different source
selections chosen with SOURCE SELECT (see “Source
selection” for details).
If the receiver is connected to a Philips CINEMA LINK TV via
the CINEMA LINK system control bus jacks (see
“CONNECTIONS”), you may use the TV to set up the system.
An option called RECEIVER will be added to the TV menu.
COAX1
Digital coaxial input 1, COAX 1 IN
COAX2
If CINEMA LINK is on, adjustments on the receiver will be
shown on the TV screen for a few seconds. Consult the
instruction booklet of your TV on how to use the TV menu.
The options offered may vary by TV model.
Digital coaxial input 2, COAX 2 IN
OPT(FR 963, FR 985, FR 986, FR 994 only)
Digital optical input, OPTICAL IN
OPT 1(FR 995, FR 996 only)
Digital optical input, OPTICAL 1 IN
OPT 2(FR 995, FR 996 only)
Digital optical input, OPTICAL 2 IN
SAT IN
Switching the connection
• Press CINEMA LINK on or off to switch the connection
between the receiver and the TV.
yIf the connection is switched on, CINEMA LINK ON is
displayed.
Analog audio input SAT IN
VCR IN
Analog audio input VCR IN
TV IN
Note: We recommend switching CINEMA LINK off during
recording. This avoids unwanted interruptions due to
switching TV functions.
Analog audio input TV IN
CDR IN
Analog audio input CDR IN
CD IN
If CINEMA LINK is switched on and the TV menu is active,
TV MENUis displayed and the menu and sound functions on
the receiver are locked.
Analog audio input CD IN
6 CH IN
Analog audio input 6 CHANNEL / DVD INPUT
Activating CINEMA LINK
* TUNER
Setup for preset radio stations (see “TUNER” for details).
AUTO INSTALL
• Press
CINEMA GO on the remote control.
yThe TV sends a play command to the CINEMA LINK DVD
player, if present. The DVD player will start playing and the
receiver automatically switches to the best CINEMA LINK
sound.
Stores radio stations automatically
MAN INSTALL
Stores radio stations manually
GIVE NAME
Allows you to assign names to stored radio stations
RESHUFFLE
•
•
If no DVD player is connected or if the DVD player has no disc
loaded, the TV will send a play command to the CINEMA LINK
video recorder, if present.
yThe video recorder will start playing and the audio receiver
selects the best CINEMA LINK sound.
Resorts stored radio stations
If no video recorder source is connected or tape is loaded, the
TV will select the last watched TV channel.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
SOURCE SELECTION
SOURCE SELECT
Using one source selection for two or more
appliances
You may assign more than one source to a source selection.
This can be useful when products are connected one after the
other in a chain.
When selecting a source by turning SOURCE SELECT, the
audio and video inputs with the corresponding name are
activated. The incoming signal is reproduced by all audio and
– if the source includes a video signal – video outputs of the
receiver. It is possible to reassign a source selection to other
than these standard inputs.
Example: A VCR is connected to the TV but only the TV is
connected to the receiver. Both SOURCE SELECT
settings, TV as well as VCR, have to use the TV
input connectors.
Source selected........Connectors used
DVD...............................COAX 1 digital audio input and
DVD IN video input
1 Choose * SELECT INPUTfrom the menu and press
NEXT 2.
PHONO..........................PHONO IN audio input
TUNER ..........................The tuner part of the receiver is used,
all inputs are switched off.
2 Turn SOURCE SELECT to select the source which should be
reassigned (e. g. VCR).
CD.................................CD IN audio input
CDR/TAPE.....................CDR/TAPE IN audio input
yThe name of the source is displayed and the light of the
source flashes.
TV..................................TV IN audio input and
no video input
3 Turn X MENU NAVIGATOR to select the input connectors
which should be used (e. g. VCR -> TV IN).
VCR...............................VCR IN audio input and
VCR IN video input
SAT ...............................SAT IN audio input and
SAT IN video input
4 Press ENTER / OK to confirm your selection.
ySTORED is displayed briefly.
5 This source selection is now using the chosen audio input (e.
g. VCRuses the TV IN input connectors, VCR <TV IN>is
displayed briefly when switching to VCR).
6 CHANNEL-DVD/SACD INPUT selection
The 6 CHANNEL / DVD INPUT connectors can be assigned to
any of the available sources (excluding TUNER and PHONO).
The assignment can be done via the * SELECT INPUT
option in the menu. See below for more details.
About 6 CHANNEL-DVD/SACD INPUT
The 6 CHANNEL / DVD INPUT can be used to connect a
device with a built-in multichannel decoder (e.g. Dolby Digital,
DTS, etc.) and 6-channel output connector, i. e. a high end
DVD/SACD player.
Reassigning a source selection
If a source is selected with SOURCE SELECT the standard
audio input is used. To change this, the source selection must
be reassigned to another audio input.
When using the 6 CHANNEL / DVD INPUT audio input, the
receiver works as a multichannel amplifier. The source
reproduces surround sound and sends it to the receiver
divided into the necessary channels. Therefore the
Example: Reassigning CDfrom the analog CD IN audio input
to the digital COAX 2 IN audio input.
SURROUND ON/OFF, HALL and SURR. MODE button have no
effect since the provided signal is already multichannel.
1 Choose * SELECT INPUTfrom the menu and press
NEXT 2.
From a source which is connected to the
6 CHANNEL / DVD INPUT audio input cannot be recorded.
2 Turn SOURCE SELECT to select the source which should be
reassigned (e. g. CD).
yThe name of the source is displayed and the light of the
source flashes.
3 Turn X MENU NAVIGATOR to select the input connectors
which should be used (e. g. CD -> COAX2).
4 Press ENTER / OK to confirm your selection.
ySTORED is displayed briefly.
5 This source selection is now using the chosen audio input
(e. g. CDuses the COAX 2 IN input connectors, COAX 2
lights when switching to CD).
19
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK, RECORDING
Playing a source
Recording from a source
1 Press POWER / STANDBY to switch on the receiver.
If you wish to record from a source you must select it with
SOURCE SELECT. The incoming signal is reproduced by all
audio and – if the source includes a video signal – video
outputs of the receiver. The sound settings do not affect the
recording.
2 Turn SOURCE SELECT to select a source.
yThe name of the source is displayed.
• You can select the FRONT AV/GAME input by pressing
FRONT AV (FR 995, FR 996 only).
1 Turn SOURCE SELECT (or press FRONT AV – FR 995, FR 996
only) to select the source you want to record from.
yThe name of the source is displayed.
3 Start playback of the source as usual.
2 Prepare the desired recording appliance. It must be
connected to one of the outputs of the receiver.
Adjusting the sound
• Turn VOLUME to adjust the volume.
yVOLUMEand the volume level between 0and 50is
displayed.
3 Start recording on the recording appliance.
4 Start the playback of the source as usual.
1 Press BASS or TREBLE.
yBASSor TREBLEand the actual value are displayed
briefly. Then TURN VOLUME KNOB TO CHANGEis
scrolled.
Notes: – The audio and video signal of VCR IN is not
reproduced by VCR OUT. The same applies to the
audio signal of CDR/TAPE IN to CDR/TAPE OUT.
– We recommend not to use the digital output
COAX OUT of the receiver to record from an analog
source. Use the analog output CDR/TAPE instead.
– From a source which is connected to the
6 CHANNEL / DVD INPUT audio input cannot be
recorded.
2 Turn VOLUME to adjust the bass or treble.
yBASSor TREBLEand the actual value are displayed.
Note: If VOLUME is not turned within 5 seconds or if any
other control is used, the bass or treble adjustment is
switched off.
Recording from the digital output
FR 963, FR 985, FR 986 only:
• Press SOUND on the remote control to scroll through
the built-in smart sounds: MOVIE, SPEECH, MUSIC,
MULTIMEDIAand PERSONAL. (PERSONALis the
userdefined bass and treble setting.)
ySMART SOUND is displayed and the name of the chosen
sound profile is scrolled once if smart sound is on.
It is possible to connect a digital recorder to the digital output of
the receiver. In this way, all signals coming from the digital
inputs can be recorded directly on the connected audio recorder.
The receiver will also convert all signals coming from the analog
inputs to the digital output.
The receiver can be used to record digitally a multichannel
surround sound audio signal (Dolby Digital or DTS) from, for
example, DVD to CD-R. The receiver will convert the digital
multichannel signal into a stereo signal without loss of relevant
sound information.
FR 994, FR 995, FR 996 only:
• If a subwoofer is connected, press SUBW. ON/OFF to
increase the bass performance.
Note: In case of digital surround sound, a subwoofer signal
will only be available when supported by the source
material.
Notes: – Do not use the 3D SURROUND feature while making
digital recordings as this will distort the digital audio
signal (FR 963, FR 985, FR 986 only).
• Press LOUDNESS to switch on or off loudness.
yLOUDNESS is displayed if loudness is on.
– When recording a Dolby Digital or DTS signal, each
track must be recorded individually.
– Digital recording is not possible when the digital
source material is copy-protected.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
SURROUND SOUND
About surround sound
Switching surround sound
Surround sound gives you a completely new listening
With surround sound on, you can switch through the different
surround modes. Note that the possibilities are related to
speaker setup defined in the receivers menu.
sensation. You will have the feeling of being in the middle of
the action, because sound is coming from everywhere around
you. Look out for TV broadcasts, audio and video tapes and
discs with the 3, 1 or
marks which are
If a digital surround signal is detected, the receiver will scroll
encoded for multichannel surround sound. You should prefer
Dolby Digital or DTS to get the most out of your receiver.
either DOLBY DIGITALor DTS.
1 Press SURROUND ON/OFF to switch on the surround sound.
The FR 994, FR 995 and FR 996 are able to reproduce DTS
surround sound. DTS is a premium multichannel surround
sound system available on DVD discs, laserdiscs and audio
discs. Consult your software dealer on the availability of DTS
software in your region.
yThe surround mode in use is scrolled.
2 Press SURR. MODE repeatedly to listen to the different
surround modes (if available).
yThe chosen mode and the speakers used are displayed.
If the incoming multichannel signals are reduced to
fewer output signals, DOWNMIX is displayed.
Notice that DVD discs do not always carry full multichannel
surround. To be sure that a disc is multichannel encoded
consult your dealer.
FR 963, FR 985, FR 986 only:
3 Press 3D SURROUND to switch on or off virtual 3D surround.
yA light indicates if virtual 3D surround is on.
Most ordinary stereo tapes and discs can be replayed using
surround sound settings with good results. If the reproduction
is distorted in surround mode, switch to normal stereo mode.
FR 994, FR 995, FR 996 only:
3 Press VIRTUAL MODE as often as necessary to switch
through the virtual surround sound modes:
1 × to activate 3D SURROUND
The availabilty of the various surround sound modes
described depends on the number of speakers used and the
incoming sound information.
2 × to activate MULTI FRONT
3 × to activate MULTI REAR
4 × to activate NATURAL SURROUND
yA light indicates if a virtual surround sound mode is on.
-signs indicate which virtual surround sound mode is
active.
4 Press SURROUND ON/OFF to switch off the surround
sound.
ySURROUND OFFis scrolled.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
SURROUND SOUND
Virtual Surround
Surround sound settings
HALL
Your receiver is able to reproduce one or more forms of virtual
surround sound. Virtual surround gives a more real life sound
impression by creating phantom speakers in addition to or
instead of real speakers. The position of the listener
influences the surround effect. The area where the effect is
best is shown in grey.
The sound reproduction is enhanced and a slight echo is
added. This gives the impression of being in a large room.
Can only be used in stereo mode.
SURROUND
The surround mode enables normal surround sound
reproduction with 4 or 5 speakers. Depending on the source
material, Dolby Surround Pro Logic, Dolby Digital or DTS is
reproduced.
CENTER
RIGHT
LEFT
PRO LOGIC, DOLBY DIGITAL, DTS
In addition to SURROUND, the surround mode used –
depending on the source material – will be displayed. In case
of digital surround, the sound format AC-3 (for Dolby Digital) or
DTS will be displayed, followed by the sound channels, available
on the source (e. g. DVD).
The level of virtual surround sound effect can be adjusted in
the setup menu. The following surround sound modes are
available:
Example: AC-3 3/2.1 Dolby Digital, 3 front channels,
2 surround channels and a
subwoofer channel.
AC-3 3/1.0 Dolby Digital, 3 front channels,
1 (mono) surround channel without
subwoofer signal.
DTS 3/2.1 DTS, 3 front channels, 2 surround
channels and a subwoofer channel.
3D SURROUND
No rear speakers are needed. The sound of the rear channel
is simulated by the front speakers. Surround sound is
simulated through the front left, right and center speakers.
MULTI FRONT(FR 994, FR 995, FR 996 only)
Phantom speakers are created next to the left and right front
speaker.
FRONT-3 STEREO
The surround sound is muted. 3 Stereo lets you listen to
surround sound without using the surround speakers.
MULTI REAR(FR 994, FR 995, FR 996 only)
Phantom speakers are created next to the left and right rear
speaker.
STEREO
All sound is reproduced and played through the front left and
right speakers. This enables standard stereo reproduction.
NATURAL SURROUND(FR 994, FR 995, FR 996 only)
Phantom speakers are created next to the left and right front
and rear speakers.
Note: The availability of MULTI FRONTand
MULTI REARdepends on the sound channels on the
source material (FR 994, FR 995, FR 996 only).
NIGHT MODE (only on the remote control)
The loud parts of the sound are lowered and the soft passages
are raised. You can enjoy surround sound without disturbing
sleeping children or neighbors. Night mode only works with
Dolby Digital, and only if supported by the source material.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER
Tuning to radio stations
Storing radio stations
You can search for radio stations by scanning the frequency
band. You can also key in the frequency of a known radio
station. If an FM station is being broadcast and received in
stereo, STEREO is shown.
You may store up to 30 radio stations in the memory. The
receiver can select and program radio stations by itself or you
can choose them yourself.
Automatic programming
Searching for radio stations
1 Turn SOURCE SELECT to select the tuner.
yTUNERis displayed.
1 Choose * TUNERfrom the menu and press NEXT 2.
2 Choose AUTO INSTALLand press NEXT 2.
yThe preset number where programming will start, the
waveband and AUTOare displayed.
2 Select a waveband by pressing TUNER BAND repeatedly.
yThe selected waveband is displayed.
3 Turn TUNER PRESET X to change the preset number where
3 Keep 1 or 2 pressed for approximately 1 second.
ySEARCHis displayed and the tuner tunes to a station
with sufficient strength.
programming should start.
4 Use TUNER BAND to switch to the desired waveband.
4 Repeat this procedure until you find the desired station.
5 Press ENTER / OK to start programming.
yAUTO INSTALLflashes and all available radio
stations are programmed, this may take a few minutes.
Programming is done when AUTO INSTALLstops
flashing.
• To fine tune to a weak transmitter, briefly press 1 or 2 as
often as necessary for optimum reception.
Tuning to a radio station by frequency (with the remote
control only)
Manual programming
1 Press TUNER.
1 Choose * TUNERfrom the menu and press NEXT 2.
yTUNERis displayed.
2 Choose MAN INSTALLand press NEXT 2.
yA preset number, the waveband and the frequency are
displayed.
2 Press FR. D..
y_is displayed.
3 Use 1–0 to key in the frequency of a radio station.
3 Turn TUNER PRESET X to change to the preset number
where the radio station should be stored.
Notes: Only valid numbers within the frequency range of the
tuner can be keyed in.
4 Tune to the desired radio station (see “Searching for radio
stations”).
Switching FM sensitivity
You can switch the tuner to a lower search sensitivity, to
search only for stations with a strong signal (FM only).
5 Press ENTER / OK to confirm your selection.
ySTOREDis displayed briefly. The radio station is
programmed at the chosen preset number.
1 Turn SOURCE SELECT to select the tuner.
yTUNERis displayed.
6 Select and store all desired radio stations this way.
2 Press SENS. on the receiver.
yEither SENS HI or SENS LO is displayed for 5 seconds.
Note: While searching for radio stations, the actual sensitivity
is displayed. In this case, SENS LO means the tuner is
looking only for radio stations with a strong signal.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER
Tuning to stored radio stations
Naming radio stations
1 Turn SOURCE SELECT to TUNER to select the tuner.
yTUNERis displayed.
It is possible to assign a name to any of the preset radio
stations.
2 Turn TUNER PRESET X to select a preset radio station.
1 Choose * TUNERfrom the menu and press NEXT 2.
yPRESET, the preset number and station are displayed.
2 Choose GIVE NAMEand press NEXT 2.
yA preset radio station is displayed.
Resorting stored radio stations
After programming radio stations, you might want to change
their sequence. RESHUFFLEallows you to exchange the
positions of presets.
3 Turn TUNER PRESET X to select the preset to be renamed.
4 Press ENTER / OK to confirm your selection.
yThe existing name or ________is displayed.
1 Choose * TUNERfrom the menu and press NEXT 2.
5 Turn TUNER PRESET X to select a letter and NEXT 2 or
1 PREV. to move to the next or previous position.
2 Choose RESHUFFLEand press NEXT 2.
yPRESET, a preset number and station are displayed.
6 After you have entered the entire name, press ENTER / OK
to confirm.
3 Turn TUNER PRESET X to select a preset station.
ySTOREDis displayed and the name is stored.
4 Press ENTER / OK to confirm the selection.
yThe selected preset number SWAP <->and a second
preset number are displayed.
Clearing station names
1 Use the menu option * TUNER, choose GIVE NAME.
5 Turn TUNER PRESET X to select the other preset station.
yA preset radio station is displayed.
6 Press ENTER / OK to confirm the exchange.
yRESHUFFLEDis displayed briefly and these two
preset numbers are swapped.
2 Turn X MENU NAVIGATOR to select the name to be
cleared.
3 Press ENTER / OK to confirm your selection.
4 Press 1 PREV. while the first letter is flashing.
y CLis flashing to the left of the station name.
5 Press ENTER / OK to clear the station name.
Or, if you have changed your mind,
press 1 PREV. to leave the station name as it is.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
TECHNICAL DATA
Tuner part
Wave range
Receiver
Subject to modification without notice.
FM..............................................................87.5–108.0 MHz
AM................................................................530–1,700 kHz
Sensitivity
General
Power consumption (FR 963, FR 985, FR 986).................260 W
Power consumption (FR 994, FR 995, FR 996).................280 W
Standby power consumption............................................< 2 W
Dimensions, w × h × d ............................435 × 135 × 350 mm
Weight (FR 963, FR 985, FR 986)......................................8.6 kg
Weight (FR 994, FR 995, FR 996)......................................9.4 kg
Stereo FM ..................................................................41 dBf
Mono FM....................................................................17 dBf
Total harmonic distortion
Stereo FM ...................................................................0.8 %
Mono FM.....................................................................0.9 %
Frequency response ...................................63–12,500 Hz ±1 dB
S/N ratio
Stereo FM....................................................................55 dB
Mono FM.....................................................................60 dB
Channel separation.............................................27 dB at 1 kHz
Amplifier part (0.7 % THD, 6 Ω)
FR 963, FR 985, FR 986:
Output power, stereo mode: FTC (40 Hz–20 kHz).......2 × 50 W
Output power, surround mode (1 kHz)
Front ......................................................................2 × 60 W
Center ..........................................................................60 W
Surround................................................................2 × 60 W
FR 994, FR 995, FR 996:
Output power, stereo mode: FTC (40 Hz–20 kHz).......2 × 80 W
Output power, surround mode (1 kHz)
Front ....................................................................2 × 100 W
Center ........................................................................100 W
Surround..............................................................2 × 100 W
Bass ..................................................................±9 dB at 100 Hz
Treble ................................................................±9 dB at 10 kHz
Loudness....+6 dB at 100 Hz (-30 dB); +3 dB at 10 kHz (-30 dB)
Total harmonic distortion.........................0.05 % at 1 kHz, 5 W
Frequency response ..................................20–20,000 Hz, ±1 dB
S/N ratio ........................................................................≥ 82 dB
Stereo separation (1 kHz) ..............................................≥ 45 dB
Crosstalk (1 kHz) ...........................................................≤ -65 dB
Inputs
Linear inputs.......................................................250 mV/47 kΩ
6 CH ....................................................................250 mV/40 kΩ
Front AV (FR 995, FR 996 only)...........................250 mV/22 kΩ
Phono ......................................................................5 mV/47 kΩ
Digital coaxial ..............................................75 Ω acc. IEC 958
Digital optical...................................................................toslink
Outputs
Power supply AC outlets (switched) ...........totally max. 120 W
Linear outputs.......................................................250 mV/1 kΩ
Digital coaxial ..............................................75 Ω acc. IEC 958
Digital output sampling frequencies
Analog in .............................................................out 48 kHz
Digital in 32 kHz..................................................out 32 kHz
Digital in 44.1 kHz............................................out 44.1 kHz
Digital in 48 kHz..................................................out 48 kHz
Digital in 96 kHz (FR 994, FR 995, FR 996 only)...out 48 kHz
Subwoofer pre-out....................................................0.8 V/1 kΩ
Center pre-out...........................................................0.8 V/1 kΩ
Headphones....................................8–600 Ω (3 V e.m.f., 60 Ω)
Speakers ...........................................................................≥ 6 Ω
25
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
If a fault occurs, first check the points listed, before taking
the set for repair.
WARNING
Under no circumstances should you try to repair the
set yourself as this will invalidate the warranty. Do
not open the set as there is a risk of electric shock.
If you are unable to solve a problem by following these hints,
consult your dealer or service center.
PROBLEM
POSSIBLE CAUSE
SOLUTION
Set does not work
and is in standby mode
The overheating safety circuit
has been activated.
Switch the set off and let it cool down. After
having let the set cool down switch it on again
and select a source by rotating SOURCE SELECT
or pressing a source key on the remote control.
No sound
VOLUME is not adjusted correctly.
Headphones are connected.
Adjust the VOLUME.
Disconnect headphones.
The wrong source is selected.
Turn SOURCE SELECT to select the correct
source.
No sound on the
left or right side
One speaker is connected incorrectly.
A speaker cable is damaged.
Connect the speaker properly.
Replace the cable.
Volume balance in the receiver menu is
adjusted incorrectly.
Adjust VOL FRONT-Land VOL FRONT-R
in the receiver menu.
Poor sound or no sound at SURROUND mode is not switched on.
the center or surround
Press SURROUND ON/OFF to switch on the
surround sound.
speakers
Surround and/or center speakers are not
Connect the speakers properly.
(properly) connected.
Surround and/or center speakers are switched Set speaker present to YES.
off in the SPEAKR SETUPmenu.
A speaker cable is damaged.
Speakers are not in phase.
Replace the cable.
Poor bass sound
Bad sound
Connect the colored (or marked) wires to the
colored terminals and the black (or unmarked)
wires to the black terminals.
Badly matching setting for the given type of
music or sound.
Correct the sound settings on the receiver.
Surround sound level is
too low or too high
The level of the surround sound is not
adjusted properly.
Adjust the level of the surround sound on
the receiver.
Center sound level is too The sound level of the center channel is not
Adjust the level of the center channel
on the receiver.
low or too high
adjusted properly .
Only center speaker is
heard in Dolby Surround
Pro Logic
A mono signal is reproduced.
Choose a different sound source or switch off
surround sound.
Bad radio reception,
automatic programming
does not work properly
Receiver or antenna is positioned near a
radiation source such as TV, CD player,
CD recorder, DVD player, etc.
Change the position of the interfering unit
or try to switch it off.
No digital recording
possible via digital output the digital recorder.
The sampling frequency is not accepted by
Make sure the digital recorder can handle
sampling frequencies between 32 kHz and 48 kHz
or make the recording via analog output.
Whole recording appears The DVD player does not provide track
Record each track individually or use the
as one track when
information.
“manual track increment” feature on the recorder.
recording from DVD disc
26
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
AUDIO SYSTEM
One Year Free Labor
One Year Free Service on Parts
This product must be carried in for repair.
W HO IS COVERED?
BEFO RE REQ UESTING SERVICE...
Please check your owner’s manual before requesting service.
Adjustments of the controls discussed there may save you a service
call.
You must have proof of purchase to receive warranty service.A sales
receipt or other document showing that you purchased the product
is considered proof of purchase.
W HAT IS COVERED?
TO GET WARRANTY SERVICE IN U.S.A.,
Warranty coverage begins the day you buy your product. For one
year thereafter, all parts will be repaired or replaced, and labor is
free.After one year from the day of purchase, you pay for the
replacement or repair of all parts, and for all labor charges.
All parts, including repaired and replaced parts, are covered only for
the original warranty period.When the warranty on the product
expires, the warranty on all replaced and repaired parts also expires.
PUERTO RICO O R U.S. VIRGIN ISLANDS...
Take the product to a Philips factory service center (see enclosed
list) or authorized service center for repair.When the product has
been repaired, you must pick up the unit at the center. Centers may
keep defective parts. (In U.S.A., Puerto Rico and U.S.Virgin Islands, all
implied warranties, including implied warranties of merchantability
and fitness for a particular purpose, are limited in duration to the
duration of this express warranty. But, because some states do not
allow limitations on how long an implied warranty may last, this limi-
tation may not apply to you.)
W HAT IS EXCLUDED?
Your warranty does not cover:
•
labor charges for installation or setup of the product, adjustment
of customer controls on the product, and installation or repair of
antenna systems outside of the product.
TO GET WARRANTY SERVICE IN CANADA...
Please contact Philips at:
•
product repair and/or part replacement because of misuse, acci-
dent, unauthorized repair or other cause not within the control of
Philips Consumer Electronics Company.
1-800-661-6162 (French Speaking)
1-800-363-7278 (English Speaking)
•
•
reception problems caused by signal conditions or cable or anten-
na systems outside the unit.
a product that requires modification or adaptation to enable it to
operate in any country other than the country for which it was
designed, manufactured, approved and/or authorized, or repair of
products damaged by these modifications.
incidental or consequential damages resulting from the product.
(Some states do not allow the exclusion of incidental or conse-
quential damages, so the above exclusion may not apply to you.
This includes, but is not limited to, prerecorded material, whether
copyrighted or not copyrighted.)
(In Canada, this warranty is given in lieu of all other warranties. No
other warranties are expressed or implied, including any implied war-
ranties of merchantability or fitness for a particular purpose. Philips is
not liable under any circumstances for any direct, indirect, special,
incidental or consequential damages, howsoever incurred, even if
notified of the possibility of such damages.)
•
REMEMBER...
Please record the model and serial numbers found on the product
below.Also, please fill out and mail your warranty registration card
promptly. It will be easier for us to notify you if necessary.
•
a product that is used for commercial or institutional purposes.
W HERE IS SERVICE AVAILABLE?
MODEL # ________________________________________
Warranty service is available in all countries where the product is
officially distributed by Philips Consumer Electronics Company. In
countries where Philips Consumer Electronics Company does not
distribute the product, the local Philips service organization will
attempt to provide service (although there may be a delay if the
appropriate spare parts and technical manual(s) are not readily avail-
able).
SERIAL #
________________________________________
MAKE SURE YO U KEEP...
Please keep your sales receipt or other document showing proof of
purchase.Attach it to this owner’s manual and keep both nearby.Also
keep the original box and packing material in case you need to return
your product.
This warranty gives you specific legal rights.You may have other rights which vary from state/province to state/province.
Philips Service Solutions Group, P.O. Box 2976, Longview,Texas 75606, (903) 242-4800
EL4965E005 / MAC 4110 / 1-97
Download from Www.Somanuals.com. All Manuals Search And Download.
Samsung.......................0067, 0171
Scientific Atlanta .........0035, 0044, 0504
Seam.............................0537
Signal............................0042, 0067
Signature......................0038
CABLE BOX
ABC...............................0030, 0035, 0038, 0040, 0028, 0034,
0041, 0044
Allegro..........................0180, 0342
Antronix........................0049, 0234
Archer...........................0049, 0180, 0234, 0824
Belcor............................0083
Sprucer .........................0048
Starcom ........................0030, 0042
Stargate........................0067, 0042, 0824
Starquest......................0042
Bell & Howell...............0041
Cable Star.....................0083
Sylvania........................0028
Cabletenna ...................0049
TFC................................0337
Cableview.....................0049
TV86..............................0090
Century .........................0180
Tandy ............................0285
Citizen...........................0180, 0342
Colour Voice .................0052, 0058
Comtronics....................0067
TeleCaption...................0248
Teleview .......................0067
Texscan.........................0028
Contec...........................0046
Timeless........................0445
Digi ...............................0664
Eastern..........................0029
Tocom ...........................0039, 0040
Toshiba .........................0027
Emerson........................0824
Tusa ..............................0042
Everquest......................0042, 0067
Focus.............................0427
Unika.............................0234, 0180, 0049
United Artists ...............0034
France Telecom.............0923
GC Electronics ..............0083, 0234
Garrard..........................0180
Universal.......................0234, 0049, 0083, 0218, 0180
Viewstar .......................0285, 0054, 0090
Westminster.................0132
Gemini ..........................0269, 0042
General Instrument ......0303, 0503, 0038, 0837
GoldStar........................0067, 0171
Goodmind .....................0824
Hamlin ..........................0047, 0036, 0286, 0061
Hitachi ..........................0038
Zenith............................0027, 0552, 0081, 0035, 0042, 0234
Zentek...........................0427
CD
ADC...............................0045
Adcom...........................0261, 0182
Aiwa .............................0151, 0039, 0184
Akai...............................0183
Anthem.........................0924
Audio Alchemy .............0221
Audio-Technica.............0197
BSR...............................0272, 0221
Burmester.....................0447
California Audio Lab.....0056
Carrera..........................0221
Carver ...........................0184, 0206, 0464
Craig .............................0642
Crown ...........................0149
Curtis Mathes...............0056
DAK...............................0272
Hytex.............................0034
Jasco ............................0042, 0180, 0342
Jerrold ..........................0030, 0039, 0303, 0038, 0041, 0042,
0051, 0503, 0837
Linsay............................0467
Magnavox.....................0054, 0041
Memorex ......................0027
Movie Time...................0090, 0183
NAP...............................0034
NSC...............................0183, 0090
Novaplex.......................0645
Oak................................0046, 0034
Optimus ........................0048
Panasonic .....................0048, 0134, 0027
Panther .........................0664
DBX...............................0281
DKK...............................0027
Paragon.........................0027
Philips...........................0052, 0058, 0269, 0317, 0054, 0180
Pioneer..........................0171, 0050, 0560
Popular Mechanics.......0427
Proscan.........................0048
Pulsar............................0027
Quasar ..........................0027
RCA...............................0048
Radio Shack..................0824, 0042, 0342, 0910
Realistic........................0234
Recoton.........................0427
Regal.............................0286, 0047
Regency........................0029
Rembrandt....................0038
Runco............................0027
SL Marx ........................0067
Denon ...........................0030, 0061, 0900
Emerson........................0182, 0191, 0332, 0496
Fisher............................0115, 0206, 0201, 0369
GE .................................0036
Garrard..........................0307, 0272, 0420, 0447, 0452
Genexxa........................0059, 0191, 0332
GoldStar........................0444
Harman/Kardon............0200, 0184, 0453
Hitachi ..........................0059, 0182
JVC ...............................0099, 0682, 0685
Kenwood.......................0055, 0217, 0708, 0853, 0064
Kodak............................0314
Krell ..............................0184
Kyocera.........................0045
78
Download from Www.Somanuals.com. All Manuals Search And Download.
LXI.................................0332
Linn...............................0184
Luxman .........................0120
MCS..............................0056, 0070
MGA .............................0110
Harman/Kardon............0209, 0056
JVC ...............................0271, 0300
Kenwood.......................0098, 0097, 0260
Magnavox.....................0056
Marantz ........................0056, 0036
Mitsubishi.....................0310
MTC..............................0447
Magnavox.....................0184, 0553, 0332
Marantz ........................0184, 0056, 0207, 0462
McIntosh.......................0314
NAD..............................0171
Onkyo............................0162, 0163, 0309
Optimus ........................0247, 0054, 0364, 0466
Panasonic .....................0256
Mission.........................0184
Mitsubishi.....................0110
Philips...........................0056
NAD..............................0046
NEC...............................0261, 0070
NSM .............................0184
Pioneer..........................0054, 0247, 0126
Proscan.........................0053
RCA...............................0053
Nakamichi.....................0174
Revox............................0217
Nikko.............................0197, 0191, 0201
Onkyo............................0128, 0895
Optimus ........................0447, 0495, 0059, 0453, 0206, 0223,
0464, 0202, 0332, 0064, 0114, 0172,
0221, 0307, 0369, 0027
Panasonic .....................0056, 0394, 0330, 0779
Parasound.....................0447, 0221
Philips...........................0184, 0314
Pioneer..........................0059, 0495, 0271, 0332
Proscan.........................0080
Sansui...........................0036, 0056
Sharp ............................0258
Sherwood .....................0364
Sony..............................0270, 0197, 0318
Teac ..............................0335, 0316
Technics........................0256
Victor ............................0300
Wards...........................0054
Yamaha.........................0121, 0124
Proton ...........................0184
QED...............................0184
DVD
Harman/Kardon............0609
JVC ...............................0585
Kenwood.......................0561
Magnavox.....................0530
Mitsubishi.....................0548
Onkyo............................0530
Optimus ........................0552
Panasonic .....................0517
Philips...........................0566, 0530
Pioneer..........................0552, 0598
Proscan.........................0549
RCA...............................0549
Samsung.......................0600
Sony..............................0560
Technics........................0517
Thomson.......................0578
Toshiba .........................0530
Yamaha.........................0572, 0517
Zenith............................0618, 0530
Quasar ..........................0056
RCA...............................0080, 0332, 0036, 0182, 0206, 0791
Realistic........................0182, 0202, 0191, 0206, 0207, 0447
Rotel .............................0184, 0447, 0924
SAE...............................0184
STS ...............................0045
Sansui...........................0229, 0184, 0332
Sanyo............................0114, 0206
Scott .............................0191, 0182, 0332
Sears.............................0332
Sharp ............................0064, 0207, 0888
Sherwood .....................0141, 0207, 0223, 0453
Shure ............................0070
Sony..............................0027, 0212, 0631, 0517, 0632
Soundesign...................0172, 0452
Sylvania........................0184
Tascam..........................0447
Teac ..............................0420, 0447, 0201, 0207
Technics........................0056, 0330, 0234
Toshiba .........................0046
Vector Research ...........0221, 0444
Victor ............................0099
TV
A-Mark..........................0030
AOC...............................0079, 0030, 0212, 0046, 0057
Abex..............................0059
Admiral.........................0120
Adventura.....................0073
Aiko...............................0119
Akai...............................0057
Alaron...........................0206
Allegro..........................0747, 0801
Ambassador..................0204
Ampro...........................0778
Anam ............................0207
Anam National .............0082
Archer...........................0030
Wards...........................0080, 0184
Yamaha.........................0214, 0063, 0197
Yorx...............................0488
Zenith............................0642
TAPE
Aiwa .............................0224, 0227, 0056
Akai...............................0310
Carver ...........................0056
Denon ...........................0103
Fisher............................0101
Garrard..........................0335, 0466
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Audiovox.......................0119, 0030, 0207, 0478, 0650
Aumark .........................0087
KTV ...............................0307, 0207, 0212, 0244, 0066, 0057
Kaypani.........................0079
Baysonic .......................0207
Kenwood.......................0057, 0046
Belcor............................0046
Kloss.............................0073, 0051
Bell & Howell...............0043, 0181
Bradford........................0207
Brockwood....................0046
LG..................................0083
LXI.................................0181, 0205, 0074, 0044, 0081, 0183
Loewe...........................0539
Broksonic......................0030, 0263, 0490
CCE ...............................0064, 0244
CXC...............................0207
Logik .............................0043
Luxman .........................0083
MEI ...............................0212
Candle...........................0213, 0073, 0057, 0083
Capehart.......................0079
Carnivale.......................0057
MGA .............................0177, 0046, 0057, 0205
MTC..............................0087, 0046, 0057, 0212, 0083
Magnavox.....................0081, 0214, 0051, 0123, 0047, 0213,
0057, 0413, 0206
Carver ...........................0081
Celebrity .......................0027
Majestic........................0043
Cineral ..........................0478, 0119
Citizen...........................0213, 0073, 0083, 0057, 0066, 0087,
0119, 0307
Clairtone.......................0212
Concerto .......................0083
Contec...........................0184, 0207, 0212
Craig .............................0207
Crosley..........................0081
Marantz ........................0081, 0064, 0057
Matsushita ...................0078, 0277
Megatron......................0030, 0172, 0205
Memorex ......................0205, 0043, 0083, 0087, 0177, 0181, 0277
Midland ........................0044, 0059, 0066, 0074, 0078, 0162
Minutz...........................0048
Mitsubishi.....................0177, 0046, 0205, 0120
Motorola.......................0082, 0120
Crown ...........................0066, 0207
Curtis Mathes...............0087, 0057, 0181, 0043, 0066, 0074, 0078,
0081, 0083, 0120, 0172, 0193, 0478, 0493
Daewoo ........................0119, 0650, 0046, 0651, 0478, 0066
Daytron.........................0046, 0066
Denon ...........................0172
Multitech......................0244, 0207
NAD..............................0183, 0193, 0205
NEC...............................0057, 0046, 0083, 0524
NTC...............................0119
Nikko.............................0205, 0044, 0074, 0057, 0119, 0181, 0183
Noshi ............................0045
Dumont.........................0044, 0046
Dwin .............................0747, 0801
Dynatech.......................0244
Onwa ............................0207
Optimus ........................0277, 0193, 0181
Optonica .......................0120, 0192
Electroband...................0027, 0212
Electrohome..................0408
Emerson........................0263, 0207, 0205, 0206, 0490, 0204,
0309, 0307, 0651, 0066, 0212, 0650,
0046, 0065, 0181
Envision ........................0057
Fisher............................0181, 0186
Fujitsu...........................0206
Funai.............................0207, 0198, 0206
Futuretech.....................0207
GE .................................0048, 0054, 0074, 0082, 0078, 0205,
0162, 0309, 0478, 0120
Gibralter........................0044, 0046, 0057
Go Video.......................0087
Orion.............................0263, 0206, 0490
Panasonic .....................0078, 0277, 0082, 0028, 0074, 0080,
0081, 0087, 0120, 0172, 0177, 0181,
0183, 0192, 0205
Penney..........................0074, 0057, 0087, 0048, 0054, 0162,
0045, 0205, 0078, 0066, 0046, 0030,
0059, 0083, 0183
Philco............................0047, 0046, 0057, 0081, 0123, 0172,
0490, 0051, 0213, 0214
Philips...........................0081, 0044, 0047, 0066, 0064, 0027,
0045, 0046, 0048, 0051, 0054, 0079
Pilot...............................0046, 0057, 0066
Pioneer..........................0193, 0065
Portland ........................0119, 0046, 0066
Prism.............................0078
Proscan.........................0074, 0057
Proton ...........................0493, 0205, 0030, 0079
Pulsar............................0044, 0046
Quasar ..........................0078, 0082, 0277, 0192
RCA...............................0074, 0045, 0162, 0046, 0065, 0078,
0117, 0120
GoldStar........................0028, 0205, 0057, 0046, 0059, 0066, 0083
Gradiente......................0083, 0080
Grundig.........................0064, 0222
Grunpy ..........................0206, 0207
Hallmark .......................0205
Harley Davidson ...........0206
Harman/Kardon............0081
Harvard.........................0207
Hitachi ..........................0172, 0178, 0065, 0083, 0059
Infinity...........................0081
Radio Shack..................0192, 0207, 0205, 0057, 0066, 0046,
0181, 0059, 0074, 0083
Realistic........................0192, 0207, 0181, 0057, 0066, 0205,
0046, 0059, 0083
Inteq..............................0044
JBL................................0081
Rhapsody......................0212
JCB ...............................0027
JVC ...............................0080
Runco............................0044, 0524, 0057
SSS...............................0046, 0207
Janeil............................0073
Sampo...........................0057, 0059, 0066, 0079
KEC ...............................0207
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Samsung.......................0087, 0059, 0205, 0046, 0057, 0066,
0083, 0064
Audiovox.......................0064
Beaumark......................0267
Samsux.........................0066
Bell & Howell...............0131
Sansei...........................0478
Blaupunkt......................0033
Sansui...........................0490
Sanyo............................0181, 0186, 0173
Scimitsu........................0046
Broksonic......................0211, 0148, 0388, 0029, 0236, 0238,
0322, 0506
CCE ...............................0099, 0305
Calix..............................0064
Scotch...........................0205
Scott .............................0263, 0205, 0206, 0207, 0046
Sears.............................0186, 0181, 0173, 0183, 0081, 0083,
0198, 0205, 0074, 0206
Canon............................0062
Capehart.......................0047
Carver ...........................0108
Semivox........................0207
Cineral ..........................0305
Semp.............................0183
Sharp ............................0192, 0120, 0413, 0066, 0184
Shogun..........................0046
Citizen...........................0305, 0064
Colt ...............................0099
Craig .............................0064, 0074, 0099, 0267, 0298
Curtis Mathes...............0062, 0068, 0087, 0189
Cybernex.......................0078, 0267
Daewoo ........................0305, 0588, 0047, 0072
Daytron.........................0047
Signature......................0043
Simpson........................0213, 0214
Sony..............................0027, 0138, 0107
Soundesign...................0205, 0207, 0206, 0213
Spectricon.....................0030
Denon ...........................0069
Squareview...................0198
Dynatech.......................0027
Starlite..........................0207
Electrohome..................0064
Supre-Macy..................0073
Electrophonic................0064
Supreme .......................0027
Emerex..........................0059
Sylvania........................0081, 0047, 0123, 0057, 0408, 0051,
0213, 0214
Symphonic....................0198
TMK..............................0083, 0204, 0205
Tandy ............................0120
Tatung...........................0030, 0082
Technics........................0078, 0277, 0044, 0074
Technol Ace..................0206
Emerson........................0211, 0029, 0148, 0236, 0063, 0238, 0305,
0321, 0115, 0235, 0506, 0088, 0239, 0588,
0095, 0322, 0388, 0027, 0064, 0070
Fisher............................0074, 0131, 0081, 0093
Fuji................................0060, 0062
Funai.............................0027
GE .................................0062, 0087, 0229, 0075, 0267
Garrard..........................0027
Techwood .....................0030, 0078, 0083
Teknika..........................0213, 0043, 0206, 0046, 0066, 0081,
0207, 0083, 0119, 0177, 0087
Go Video.......................0459, 0553
GoldStar........................0064, 0065
Gradiente......................0035, 0027
HI-Q...............................0074
Telefunken....................0083
Toshiba .........................0183, 0087, 0181
Tosonic..........................0212
Totevision .....................0066
Harley Davidson ...........0027
Harman/Kardon............0108, 0065
Harwood.......................0095, 0099
Headquarter..................0073
Trical.............................0184
Universal.......................0054, 0048
Vector Research ...........0057
Victor ............................0080
Hitachi ..........................0069, 0132, 0027, 0068
JVC ...............................0094, 0035, 0068
Jensen..........................0068
Vidikron.........................0081
Vidtech..........................0046, 0205
Viking............................0073
Wards...........................0081, 0192, 0205, 0183, 0043, 0047,
0048, 0123, 0138, 0214, 0054, 0107,
0206, 0046, 0057, 0083, 0162
White Westinghouse ...0651, 0650
Yamaha.........................0046, 0057
Zenith............................0044, 0043, 0119, 0173
Zonda............................0030
KEC ...............................0064, 0305
KLH ...............................0099
Kenwood.......................0068, 0094, 0065, 0073
Kodak............................0062, 0064
LXI.................................0064
Lloyd‘s...........................0027, 0235
Logik .............................0099
MEI ...............................0062
MGA .............................0070, 0088, 0267
MGN Technology..........0267
MTC..............................0027, 0267
Magnasonic..................0305
VCR
Magnavox.....................0062, 0108, 0027, 0066, 0176
Magnin .........................0267
Admiral.........................0075
Adventura.....................0027
Marantz ........................0108, 0065, 0062
Marta............................0064
Matsushita ...................0062, 0481, 0189
Memorex ......................0131, 0074, 0027, 0064, 0062, 0075,
0267, 0334, 0073, 0066
Aiko...............................0305
Aiwa .............................0334, 0027, 0064
Akai...............................0133, 0080, 0088, 0068
American High..............0062
Asha..............................0267
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Metz..............................0033, 0064, 0189, 0323
Minolta.........................0132, 0069
Mitsubishi.....................0070, 0088, 0094, 0075
Motorola.......................0062, 0075
Multitech......................0027, 0099
NAD..............................0085
Teknika..........................0027, 0062, 0064
Thomas.........................0027
Toshiba .........................0072, 0239, 0237, 0093, 0070
Totevision .....................0064, 0267
Unitech .........................0267
Vector ...........................0072
NAP...............................0060, 0061, 0062, 0064, 0066, 0069,
0093, 0132
NEC...............................0065, 0067, 0068, 0094, 0131
Nikko.............................0064
Nikon ............................0061, 0280
Noblex ..........................0267
Vector Research ...........0065, 0067
Video Concepts.............0067, 0088, 0072
Videosonic....................0267
Wards...........................0062, 0075, 0089, 0027, 0087, 0074,
0072, 0267, 0239, 0069, 0099, 0176,
0108
Olympus........................0062
White Westinghouse ...0305
Optimus ........................0085, 0075, 0064, 0459, 0131, 0189, 0481
Optonica .......................0089
XR-1000........................0099, 0027, 0062
Yamaha.........................0065, 0068
Zenith............................0066, 0060, 0061, 0027, 0506
Orion.............................0506, 0322, 0029, 0211
Panasonic .....................0062, 0104, 0189, 0252, 0481
Penney..........................0062, 0267, 0064, 0065, 0069, 0067, 0081
Pentax...........................0069, 0132
Philco............................0062, 0506, 0236
Philips...........................0108, 0062, 0089
Pilot...............................0064
Pioneer..........................0085, 0094
Portland ........................0047
Profitronic.....................0267
SAT
AlphaStar......................0799
Astro Industries............0122
BSR...............................0122
Capetronic ....................0122
Channel Master............0045, 0239
Chaparral......................0080, 0236, 0243
DX Antenna ..................0068
Drake ............................0091, 0272, 0045
Echostar........................0307, 0802, 0175, 0186, 0296
Expressvu......................0802
General Instrument ......0388, 0896, 0654
Grundig.........................0200
HTS...............................0802
Hitachi ..........................0846
Homecable....................0265
Hughes Network Syst....0776
Hytek.............................0122
IQ ..................................0237
IQ Prism ........................0237
JVC ...............................0802
Janeil............................0179
Jerrold ..........................0388, 0654
Legend..........................0296
Macom..........................0045
Magnavox.....................0749, 0751
Memorex ......................0296, 0751
Next Level ....................0896
Panasonic .....................0179, 0728
Philips...........................0227, 0126, 0749, 0751
President.......................0101
Primestar ......................0654, 0388
Proscan.........................0593
RCA...............................0593, 0170, 0882
Radio Shack..................0593
Realistic........................0079
STS ...............................0237, 0068
Sony..............................0666
Proscan.........................0087, 0229
Protec............................0099
Pulsar............................0066, 0078
Quarter..........................0073
Quartz ...........................0073
Quasar ..........................0062, 0189, 0104, 0481
RCA...............................0087, 0176, 0229, 0069, 0132, 0104,
0133, 0062, 0075, 0267
Radio Shack..................0027
Radix.............................0064
Randex..........................0064
Realistic........................0074, 0027, 0131, 0075, 0064, 0062,
0089, 0073, 0093
Ricoh.............................0061, 0280
Runco............................0066
STS ...............................0069
Samsung.......................0267, 0072, 0080, 0078
Sanky............................0066, 0075
Sansui...........................0506, 0068, 0298, 0027, 0094
Sanyo............................0073, 0074, 0131, 0267
Scott .............................0211, 0148, 0238, 0072, 0237, 0239, 0070
Sears.............................0069, 0132, 0081, 0073, 0064, 0074,
0131, 0027, 0062, 0093
Semp.............................0072
Sharp ............................0075, 0089
Shintom ........................0099
Shogun..........................0078, 0267
Signature......................0062
Singer ...........................0099
Sony..............................0060, 0061, 0059, 0280, 0062, 0027
Sunpak..........................0280
Sylvania........................0062, 0108, 0027, 0070
Symphonic....................0027
Star Choice...................0896
Star Trak .......................0207
Toshiba .........................0109, 0817
Uniden ..........................0265, 0397, 0079, 0101, 0751, 0103, 0749
Zenith............................0091, 0883, 0272
TMK..............................0063, 0235, 0267
Tatung...........................0068
Teac ..............................0027, 0068
Technics........................0062, 0189, 0066, 0087, 0229
82
Download from Www.Somanuals.com. All Manuals Search And Download.
PHILIPS CONSUMER ELECTRONICS COMPANY
A Division of Philips Electronics North America Corporation
Knoxville, Tennessee 37914-1810, U.S.A.
W
3103 306 1863.1
Printed in Hong Kong
IB8328T001 / VieUrs0145
Download from Www.Somanuals.com. All Manuals Search And Download.
|