Always there to help you
Register your product and get support at
AJT600/37
Question?
Contact
Philips
User manual
Download from Www.Somanuals.com. All Manuals Search And Download.
m Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
1 Important safety
instruction
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
n Battery usage CAUTION –To prevent
battery leakage which may result in bodily
injury, property damage, or damage to
the unit:
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
•
•
•
•
Install all batteries correctly, + and - as
marked on the unit.
Do not mix batteries (old and new or
carbon and alkaline, etc.).
Remove batteries when the unit is not
used for a long time.
The battery (battery or batteries
installed) shall not be exposed to
excessive heat such as sunshine, fire or
the like.
g Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
h Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
i Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and the
point where they exit from the apparatus.
o Apparatus shall not be exposed to
dripping or splashing.
p Do not place any sources of danger on
the apparatus (e.g. liquid filled objects,
lighted candles).
j Only use attachments/accessories
specified by the manufacturer.
q This product may contain lead and
mercury. Disposal of these materials
may be regulated due to environmental
considerations. For disposal or recycling
information, please contact your local
authorities or the Electronic Industries
k Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
r Where the plug of the Direct Plug-in
Adapter is used as the disconnect device,
the disconnect device shall remain readily
operable.
l Unplug this apparatus during lightning
storms or when unused for long periods
of time.
3
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning
2 Your Bluetooth
Speaker
• Never remove the casing of this Bluetooth speaker.
• Never place this Bluetooth speaker on other electrical
equipment.
• Keep this Bluetooth speaker away from direct sunlight,
naked flames or heat.
• To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
• Ensure that you always have easy access to the power
cord, plug or adapter to disconnect this Bluetooth
speaker from the power.
Congratulations on your purchase, and
welcome to Philips!To fully benefit from the
support that Philips offers, register your product
What's in the box
Always there to help you
Register your product and get support at
AJW600
Question?
Contact
Philips
Short User Manual
EN
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of the main unit
e
a
b
c
f
g
d
h
i
k
l
j
A U DIO IN
g First Knob (HOUR)
a SOURCE
•
Adjust hour.
h Second Knob (MINUTE)
Adjust minute.
•
Select a source.(Bluetooth/AUDIO IN)
•
Press repeatedly to switch to standby mode.
•
b SLEEP
i Third Knob (CLOCK/SETTIME/SET AL1/
•
Set sleep timer.
SET AL2)
c SNOOZE/BRIGHTNESS
•
•
Set clock.
Set alarm.
•
Snooze alarm.
•
Adjust display brightness.
j BUZZ/SOUND 1/SOUND 2
•
Select an alarm source for Alarm 1 and
Alarm 2.
d Display panel
•
Show current information.
k
e AL1/AL2
•
Charge your devices through USB
cable (not included).
•
Activate or deactivate alarm timer.
5
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Option 2: Battery power
3 Get started
Caution
Always follow the instructions in this chapter in
sequence.
• Batteries contain chemical substances, so they should
be disposed of properly.
Note
Connect power
• Batteries are not supplied with the accessories.
• bAt shows on the display when the battery level is low.
The unit can only be powered by supplied AC
power. Batteries are only used for time and
alarm backup if not connected with AC power.
1 Open the battery compartment.
2 Insert 2 batteries (type: 1.5V LR6/AA) with
Option 1:AC power
correct polarity (+/-) as indicated.
3 Close the battery compartment.
Warning
• Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the back or the underside of the unit.
• Risk of electric shock! When you disconnect the AC
power, always pull the plug from the socket. Never pull
the cord.
Connect the AC power cord to the wall socket.
Tip
• To save energy, turn the unit off after use.
EN
6
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Play from
Bluetooth
device
Set time
1 Rotate the Third Knob to "SETTIME" to
activate clock setting mode.
» Hour and minute digits blinks.
2 Rotate the First Knob to adjust the hour.
Note
3 Rotate the Second Knob to adjust the
minute.
• The effective operation range between the Bluetooth
speaker and the paired device is approximately 10
meters (30 feet).
• Keep this Bluetooth speaker away from other electronic
devices that may cause interference.
4 Press OK on the First Knob to confirm.
» The setting time is displayed.
5 Rotate the Third Knob to CLOCK after
• Make sure that the Third Knob switches to CLOCK
before setting.
setting.
» The hour and minute digits stops
blinking.
1 Press SOURCE repeatedly to select
Bluetooth source.
»
on the display panel flashes.
Turn on
2 Activate the Bluetooth function in your
Bluetooth device (see the device user
manual).
The clock radio turns on automatically once
your plugged in.
3 Select “AJT600” displayed on your device
for pairing.
» If connection is successful, the
Bluetooth speaker beeps twice and
steadily on.
4 Start music play on your Bluetooth device.
» If Bluetooth disconnected, the music
will pause. Press
on the Bluetooth
device to start play again.
Bluetooth reset
In Bluetooth mode, press OK on the first
knob for over 5 seconds to erase all pairing
informations.
» "BT RESET" displayes on the panel.
•
The Bluetooth speaker enters
Bluetooth mode automatically after
erase completed.
7
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Play audio from 6 Other features
an external
device
Set alarm timer
Note
You can set two alarms to ring at different time.
• Make sure that the Third Knob switched to CLOCK
before setting.
Note
• The speaker can not pair with other Bluetooth devices
in AUDIO IN mode.
• Make sure that you have set the clock correctly.
You can listen to audio from an external device
through this Bluetooth speaker.
1 Rotate theThird Knob to SET AL1 or SET
AL2 to activate alarm setting mode.
1 Connect an audio cable to:
ꢀ
» The
/
and time digits blink.
•
the AUDIO IN socket on the
Bluetooth speaker.
2 Rotate the First Knob to adjust the hour.
•
the headphone socket on an external
device.
3 Rotate the Second Knob to adjust the
minute.
2 Press SOURCE repeatedly to select the
4 Press OK on First Knob to confirm.
Audio-in source.
5 Rotate the Third Knob to CLOCK after
» The on the display panel lights up.
setting.
3 Play audio on the external device (refer to
its user manual).
Select alarm source
You can select buzzer, sound 1,or sound 2 as
your alarm sound.
ALARM
BUZZ
1
2
EN
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Activate/deactivate alarm timer
Adjust display brightness
Note
• Make sure that the Third Knob switched to CLOCK
before setting.
Press AL1/AL2 to activate or deactivate the
alarm timer.
» The
ꢀ
/
appears if alarm timer is on and
disappears if it is off.
To stop the ringing alarm, press the
corresponding AL1/AL2.
» The alarm repeats ringing for the next day.
Snooze the alarm
When alarm sounds, press SNOOZE.
» The alarm snoozes and repeats ringing nine
minutes later.
Set sleep timer
Note
• Make sure that the Third Knob switched to CLOCK
before setting.
This Bluetooth speaker can switch to standby
mode automatically after a preset period.
•
Press SLEEP repeatedly to select the sleep
timer period (in minutes).
» When the sleep timer is activated,
appears.
To deactivate the sleep timer:
•
Press SLEEP repeatedly until [OFF] (off)
appears.
15
30
60
OFF
90
120
9
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Product
information
8 Troubleshooting
Warning
• Never remove the casing of this device.
Note
• Product information is subject to change without prior
notice.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page (www.
philips.com/support).When you contact Philips,
make sure that the device is nearby and the
model number and serial number are available.
No power
Specifications
Amplifier
•
•
•
Ensure that the power cord is connected
securely.
Ensure that there is power at the power
supply socket.
Ensure that the batteries are installed
correctly.
Rated Output Power
5W RMS
Bluetooth
Bluetooth
specification
Supported profiles
V3.0+EDR
No response from the Bluetooth speaker
•
HFP v1.5,AD2P v1.2,
HSP v1.2
10 m (Free space)
Disconnect and reconnect the AC power
plug, then turn on the Bluetooth speaker
again.
Range
•
•
Check if you have selected the correct
audio source.
Make sure that your Bluetooth device is
within the effective operation range.
General information
Power supply
-AC Power
-Battery
Model:
Alarm does not work
Set the clock/alarm correctly.
Clock/alarm setting erased
ASSA36A-090160;
Input: 100-240V ~,
50/60Hz, 0.6A;
Output: 9.0V 1600
mA
•
•
Power has been interrupted or the power
plug has been disconnected.
Reset the clock/alarm.
•
2 x AA batteries
Operation Power
Consumption
<15 W
Standby Power
<1 W
Consumption
Dimensions - Main
Unit (W x H x D)
Weight - Main Unit
195 x 99 x 98 mm
0.70 kg
EN 10
Download from Www.Somanuals.com. All Manuals Search And Download.
9 Notice
Disposal of your old product
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products and batteries.
The correct disposal of these products helps
prevent potentially negative consequences on
the environment and human health.
Any changes or modifications made to this
device that are not expressly approved by
WOOX Innovations may void the user’s
authority to operate the equipment.
Notice of compliance
The device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
Your product contains batteries,which cannot be
disposed of with normal household waste.Please
inform yourself about the local rules on separate
collection of batteries.The correct disposal of batteries
helps prevent potentially negative consequences on
the environment and human health.
information on a recycling center in your area.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by a
specialized company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old equipment.
a This device may not cause harmful
interference, and
b This device must accept any interference
received, including interference that may
cause undesired operation.
Notice for the USA
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation.This equipment generates,
uses, and can radiate radio frequency energy
and, if not installed and used in accordance
with the instruction manual, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encouraged
to try to correct the interference by one or
more of the following measures:
The making of unauthorized copies of copy-
protected material, including computer programs,
files, broadcasts and sound recordings, may be
an infringement of copyrights and constitute a
criminal offence.This equipment should not be
used for such purposes.
•
•
Relocate the receiving antenna.
Increase the separation between
equipment and receiver.
•
•
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
Note
• The type plate is located on the bottom of the
apparatus.
11 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications are subject to change without notice
2014 ©WOOX Innovations Limited.
All rights reserved.
This product was brought to the market byWOOX Innovations Limited or one of its affiliates,
further referred to in this document asWOOX Innovations, and is the manufacturer of the
product. P&F is the warrantor in relation to the product with which this booklet was packaged.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
AJT600D_37_UM_V2.0
Download from Www.Somanuals.com. All Manuals Search And Download.
|