Download from Www.Somanuals.com. All Manuals Search And Download.
How to...
Discover your phone
m
MMS key
Switch phone On/Off
Enter PIN code
Press and hold
Enter your PIN code using
the keypad and press
or to confirm.
).
b
key
Side keys
(volume)
Screen
,
#
Navigation
and key
Pick up and
Wap
,
Set the ringer volume
Make a call
Press the side key up or
down when in idle mode.
(key
Hang up and
on/off key
Enter the phone number on
C
camera key
)
the keypad and press
to dial.
(
c
key
Keypad
Answer a call
Press
phone rings.
(when your
Microphone
Set conversation
volume
Press the side key up or
down during the call.
End a call
Press
Press
Press
).
Philips continuously strives to improve its products.
Therefore, Philips reserves the rights to revise this user
guide or withdraw it at any time without prior notice.
Philips provides this user guide «as is» and does not ac-
cept, except as required by applicable law, liability for
any error, omission or discrepancy between this user
guide and the product described.
Access the main menu
Access the Phonebook
,
-
in idle mode.
in idle mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
Use the Phonebook
Browse the list by mov-
ing or and press
to call the selected
Activate a programmed
Voice command
Press and hold the
key.
,
+
-
(
Launch WAP
Press and hold (.
name.
Access BeDJ
Press
Press
Press
b
in idle mode.
The carousel
Access the Call list
Go to previous menu
+
c
in idle mode.
.
A carousel is a circular loop of icons displayed on the
screen. Each icon represents a feature or operation of
your phone.
Quickly return to idle
when browsing menus
Press and hold c.
All icons don’t fit within the screen; the hidden ones ap-
pear when scrolling
You access the main carousel by pressing
idle mode. Move (anti clockwise) or
when the feature or option of your
to cancel. Another sub-car-
<or>.
Lock/unlock the keypad Press and hold
cwhen
in idle mode.
,
when in
>(clock-
<
View the last call made
Press
Press and hold
or
language and press
(
in idle mode.
, move
+-to select the
wise) and press
,
Change the
language used
0
choice is selected, or
c
ousel or list will then appear.
,
.
Pressing or will alternate between two op-
+
-
Access a function
in the menu
Press ,, <or
move
to select a function,
to enter the
tions, such as Activate/Deactivate, On/Off, Increase/
Decrease a value, etc.
>
then press
,
sub-menu. Repeat to reach
the desired function.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Browse carousels and lists until you reach the desired
feature or option. When navigating in a list, a scroll bar
located on the right hand side of the screen shows your
actual position in the list. With the navigation key, you
can then select or adjust all the functions of your phone
as described in the relevant chapter of this user guide.
Events
Some events may modify the idle screen (missed call,
new message, etc.). Press
sponding menu or long press
idle screen.
,
to access the corre-
cto go back to the
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Clear the phonebook ....................................14
Quickly scroll a list .........................................14
Other features during a call .........................14
Table of contents
1. Get started .........................................7
3. Menu tree ........................................ 15
Insert the SIM card ...........................................7
Switch on the phone ........................................8
Set date and time ..............................................8
Copy the SIM phonebook ...............................8
Charge the battery ...........................................9
4. Text or number entry .................. 18
T9® text Input ................................................18
What is it? ..........................................18
How to use it? .....................................18
Basic text input ...............................................19
2. Main features ...................................10
5. Taking pictures ............................... 20
Access and consult the phonebook ...........10
Make a call .......................................................10
Answer and end a call ...................................10
Call handsfree ................................................. 10
Change the ringer ..........................................11
Lock / unlock the keypad ............................. 11
Activate the silence mode ........................... 11
Activate the vibra alert ................................. 11
Fotocall: see and hear who’s calling ...........12
Foto Talk: add voice to pictures ................ 12
Read your mobile phone number .............. 12
Mute the microphone ...................................13
Unmute the microphone .............................. 13
Record a conversation .................................. 13
Adjust the earpiece volume .........................13
Clear the call list ............................................ 13
Clear the SMS list ..........................................13
How to... ..........................................................20
Pictures shots ..................................................20
Preview mode settings ..........................20
Take a picture .....................................21
Foto Talk: add voice to pictures ............22
Review the pictures ..............................23
Receive a call .......................................23
Make a call .........................................23
Settings ..............................................................23
Colour mode .......................................23
Camera mode ..................................... 24
Sound settings ..................................... 24
Picture resolution ............................... 24
Picture quality ................................... 24
Self-timer ........................................... 24
6. Music & Mix ..................................... 25
How to... ..........................................................25
Table of contents
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Get started ......................................................25
Activate tracks .....................................25
Change track melodies and instruments 26
Change the tempo ................................26
Start recording ....................................27
Manage the recording ..........................27
Record a mix ...................................................27
Create your own style and mix ..................27
8. Settings ..............................................36
Sounds ...............................................................36
Silent ................................................. 36
Ringer volume .................................... 36
Ringer ................................................ 36
Messages Ringer .................................. 36
Equaliser ............................................ 36
Key tones ............................................ 36
Sounds Alerts ...................................... 37
Vibra alert ......................................... 37
Display ...............................................................37
Screen saver ........................................ 37
Animation ......................................... 38
Backlight ........................................... 38
Wallpaper .......................................... 38
Hotkeys ............................................................38
Voice command ..............................................40
From existing files ................................28
From scratch .......................................28
Save your own styles .....................................28
Receive a call ...................................................28
7. Phonebook .......................................29
SIM card phonebook .....................................29
Phone’s phonebook .......................................30
Add names in the phonebook .....................30
In the SIM card ..................................30
In the phone ........................................30
Add a record in the phone’s phonebook .31
Own numbers .....................................31
Fotocall: see & hear who’s calling ..............31
Edit and manage names .................................32
In the SIM card ..................................32
In the phone ........................................33
Make calls .........................................................34
Voice dial ..........................................................41
Security .............................................................42
Keypad lock ........................................ 42
Public names ...................................... 42
Call barring ....................................... 42
Change codes ...................................... 43
PIN protection ................................... 43
Network ...........................................................43
GPRS attach ...................................... 44
Register again ..................................... 44
Preferred list ....................................... 44
Emergency number ..............................34
Other number .....................................34
4
Table of contents
Download from Www.Somanuals.com. All Manuals Search And Download.
Access settings ......................................44
10. Infrared .......................................... 68
Time and date ................................................. 46
Position of devices .........................................68
Send data ..........................................................68
Select an item ......................................68
Send the selected item ...........................69
Receive data .....................................................69
Clock display .......................................46
Set date ..............................................46
Date format ........................................46
Time zone ..........................................46
Daylight saving ...................................46
Set time ..............................................46
Profiles ..............................................................47
Language ........................................................... 47
Activate IrDA .....................................69
Save the data received ..........................69
Use the phone as a modem ...................70
11. Multimedia ..................................... 71
9. Messages ...........................................49
Picture album ..................................................71
Sound album ....................................................71
Demo mode ....................................................72
Memory Status ................................................72
Sound recording .............................................73
BeDJ ...................................................................73
Camera .............................................................73
SMS .................................................................... 49
Send a SMS ........................................49
Read SMS ..........................................50
SMS settings .......................................51
SMS Archive .......................................52
E-Mail ................................................................ 52
Settings ...............................................53
Write and send an e-mail ....................55
Receive and read e-mails ......................56
Broadcast Message ........................................ 60
Instant message .............................................. 60
MMS .................................................................. 61
Create an MMS ..................................61
Receive an MMS .................................63
Manage folders ....................................65
Settings ...............................................65
12. Games & Appli. ............................ 74
Euro converter ...............................................74
Calculator .........................................................74
Alarm clock ......................................................74
Organiser .........................................................75
Create a new event ..............................75
Modify an event ..................................75
Brick Game ......................................................77
Table of contents
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Forward ............................................. 86
Refresh ............................................... 86
Save as homepage ................................ 86
Save as... ............................................ 86
Exit ................................................... 86
Receive a call ...................................... 86
13. Call information ...........................78
Call settings .....................................................78
Call forward .......................................78
Mailboxes ...........................................78
Auto redial .........................................79
Any key answer ...................................79
Call waiting ........................................79
Caller ID ............................................79
Call list ..............................................................79
15. Operator services ........................87
GSM strings ......................................................87
DTMF tones .....................................................87
Call list ...............................................80
Reset ...................................................80
Call counters ...................................................80
Pause and wait characters ................... 87
For example: access your answering
machine ............................................. 88
Make a second call .........................................88
Answer a second call .....................................88
GSM counters .....................................80
GPRS counters ....................................81
Answer a third call .........................................89
Conference call ...............................................89
Explicit call transfer ........................................90
14. WAP ...............................................82
Internet services .............................................82
Launch a WAP session .........................82
End a WAP session ..............................82
Homepage ...........................................82
Bookmarks ..........................................83
Enter address .......................................83
Settings ...............................................83
Push inbox ..........................................85
Options ............................................................85
Precautions ...........................................91
Troubleshooting ..................................95
Icons & symbols ..................................98
Philips authentic accessories ............99
Declaration of conformity ..............100
Homepage ...........................................85
Back ...................................................85
6
Table of contents
Download from Www.Somanuals.com. All Manuals Search And Download.
careful that the clipped corner of the card is in the
correct corner.
1 • Get started
Read the safety instructions in the «Precautions» section be-
fore use.
To use your phone, you must insert a valid SIM card
supplied by your GSM operator or retailer. The SIM
card contains your subscription, your mobile number,
and memory in which you can store phone numbers
and messages (see “Phonebook” page 29).
3. Slide the battery door into its slot, metallic con-
nectors downwards, until it stops. Then lock it by
pushing it downwards.
Insert the SIM card
1. Press on the two clips on each side of the back
cover of your phone as shown below and remove
it.
4. Replace the back cover of your phone: hook the
front housing onto the hinges on the top of the
phone, then press the bottom down until the
latch catches.
2. Remove the SIM card from its holder and insert it
under the metal clip holder, until it stops. Be
Get started
7
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Enter your PIN code. If you make a mistake,
press . Then press or .to confirm.
c
,#
Set date and time
As prompted by the phone at first switch on, set the
date by pressing the appropriate numeric keys (press
c
to erase a number), then press
Proceed in the same way to set the time.
,to validate.
For complete date and time options, see page 46.
Copy the SIM phonebook
5. Remove the protective film covering the screen
If you do not copy the SIM phonebook at very first
switch, you will be able to do it directly from the phone-
book menu (see page 29).
before using the phone.
Switch on the phone
1. To switch on the phone, press the
)key.
If you had a mobile phone before and are using the
same SIM card, the card might contain all or part of
your current phonebook. The mobile phone detects
this and a message asks you if you want to copy your
SIM phonebook onto the built-in phonebook. Press
2. When you switch on the phone, you may be
prompted to enter the PIN code, which is the 4
to 8-digit secret code of your SIM card to protect
it from unauthorised use. It is preconfigured and
communicated to you by your operator or
retailer. To personalise the PIN code, see page 43.
c
to cancel or ,to accept. Whether you accept-
ed, aborted or cancelled the copy, the phonebook lo-
cated on your phone is always automatically set as your
default phonebook. To switch back to the SIM phone-
If you enter a wrong PIN code 3 times, your SIM card
is blocked. To unblock it, you must request the PUK
code from your operator.
8
Get started
Download from Www.Somanuals.com. All Manuals Search And Download.
book, press
,
and select Phonebook
In SIM card
>
Phonebook
settings Phonebook select
>
>
.
Charge the battery
Your phone is powered by a rechargeable battery. A
new battery is partially charged and an alarm will warn
you when the battery reaches low.
We recommend that you do not remove the battery
when the phone is switched on: you may lose all your
personal settings (see information on battery safety,
page 93).
•
When all 4 bars are steady the battery is fully
charged, you can disconnect the charger.
Depending on the network and condition of use,
talk time can be up to 6 hrs and stand-by time up
to 300 hrs.
1. Once the battery and battery cover are clipped on
the phone, plug the connector of the charger
(supplied with the phone, in the box) into the
LEFT hand socket at the base of the phone on one
end, then plug it into a main AC power socket
with easy access on the other end.
Keeping the charger plugged to the mobile when the
battery is fully charged doesn’t damage the battery. The
only way to turn off the charger is to unplug it, so use
an easily accessible AC power socket. You can connect
the charger to an IT supply (Belgium only).
2. The battery symbol indicates the state of charge:
•
During charging the 4 charge indicators change;
Each bar represents around 25% of charge and it
takes around 1.45 hours to fully recharge your
mobile phone.
3. If you don’t intend to use your phone for several
days, we recommend you disconnect the battery.
You can use the phone while it is on charge (note that
the vibra alert goes Off when plugging the charger). If
the battery is completely flat, the battery icon will only
reappear after 2 or 3 minutes of charging.
Get started
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Answer and end a call
2 • Main features
When receiving a call, depending on your subscription
and if the caller has permitted this information to be
transmitted, his number may be displayed. If the
number is stored in the selected phonebook (see
page 29), the corresponding name is displayed instead
of the number.
Access and consult the phonebook
In idle mode, press
the selected phonebook (in SIM or in
-. Depending on
Phonebook
phone), the content that appears on the
screen may vary: see “Phonebook” page 29 for details
on this subject.
1. To answer the call, press
2. To reject a call, press
(.
)
. If you have activated
To consult the phonebook during a call, press
lect View Names List, press and scroll through the
entries by pressing or . Then press twice
,, se-
“Call forward” (see page 78), the call is diverted
to a number or voice mail.
,
+
-
c
3. To hang up, press
).
to return to the in-call screen.
The phone will not ring if in Silence mode (see
page 11). If you have selected Any Key Answer (see
page 79), you can accept a call by pressing any key (ex-
Make a call
1. In idle mode, enter the phone number using the
keypad. To correct an error, press
2. Press to dial the number and press
hang up.
cept
)).
c
.
(
)to
Call handsfree
For your own comfort and safety, ensure you move the
phone away from your ear when calling handsfree, es-
pecially when increasing the volume.
For an international call, enter the «+» sign instead of
the usual international prefix by pressing and holding
*
. To learn how to make a call from the phonebook,
see “Make calls” page 34.
1. If you selected the phonebook in your SIM card,
select a record, press
,
twice to access the next
10
Main features
Download from Www.Somanuals.com. All Manuals Search And Download.
carousel, then select Call handsfree and
press to dial the number.
2. If you selected the phonebook in your phone,
Activate the silence mode
,
If you don’t want your phone to ring
when you receive a call, you can deacti-
vate the ringer as follows:
proceed the same way to call the default number,
Silent
or press
the list, then press
<
or
>
, select another number in
and select Call handsfree
Press
press
,
and select Settings
until the volume is set to On.
>
Sounds
>
Silent and
,
.
-
If already on the phone, press
handsfree mode and back.
,twice to switch to
You can also press the side key while in idle screen until
the volume is set to silence.
Change the ringer
You can also mute the ringer when receiving a call by
pressing the side key down.
1. Press
press
2. Move
,
, select Settings
>
Sounds
>
Ringer and
,
again.
or
Activate the vibra alert
+
-
to select a ringer in the list,
then press
,
to confirm your choice.
If you want your phone to vibrate when
you receive a call, you can activate the vi-
bra alert as follows:
Lock / unlock the keypad
Vibra alert
1. Press
and press
2. Move
,
, select Settings
>
Sounds
>
Vibra alert
You can lock the keypad to protect the
keys from being pressed accidentally
(e.g., when the phone is in your pocket).
,
.
Keypad lock
+-to select On or Off and press
to confirm.
or
,
To lock the keypad, press and hold
screen. To unlock the keypad, press and hold
cwhen in idle
c
Activating the vibra doesn’t mute the ringer. If you
want to mute it and keep the vibra function on, acti-
vate the Silent mode as described above.
again.
The vibra alert is automatically deactivated when you
plug the charger.
Main features
11
Download from Www.Somanuals.com. All Manuals Search And Download.
1. When in idle mode, press
C
to activate the
Foto Talk: add voice to pictures
camera, and press
friend.
Cto take a picture of your
This feature, which is available when using the camera
and also from the Picture album, allows you to quickly
send a message made of a picture and a sound.
2. Select Multimedia
>
Sound recording
>
New
.
Record them saying something and save it in the
Sound album
3. Select Phonebook
tings Groups. Rename a group and select your
friend’s voice, then their picture.
1. When in idle mode, press
Cto activate the
.
camera.
>
Phonebook set.
>
Group set-
2. Press
access the option and select Send by MMS
3. Press again to access the Voice memo
recording window.
Cto take a picture, then press ,to
>
.
,
4. Press
-
, select a name in your phonebook and
. Press , and choose Select group to link
press
,
4. Press
,, select the person you want to send it
it to the group that you renamed.
to and validate the list. Press
your message.
,twice to send
Read your mobile phone number
To read your own mobile phone number, press
-
This will send one message to one person, without text.
See “MMS” page 61 for details on this feature.
when in idle mode and select Own numbers, then press
,
, select Show and press again. Your phone
number is displayed if present on your SIM card. If
,
Fotocall: see and hear who’s calling
not, select New, then follow the instructions.
This feature is available only when selecting the phone-
book in the phone (not the one in the SIM card).
If your own number has been stored in the Phonebook,
you can read it during a call. See “Access and consult
the phonebook” page 10.
This feature allows you to link one or several names to
a group. When a name in that group calls, it will appear
along with the corresponding picture, and the melody
defined for that group will ring.
12
Main features
Download from Www.Somanuals.com. All Manuals Search And Download.
private. 1 min. is the maximum recording time avail-
able (see “Sound recording” page 73).
Adjust the earpiece volume
During a call, move the side key up or down to in-
crease/decrease the volume.
To record a conversation during a call:
1. While one or several simultaneous calls are in
Mute the microphone
progress, press
ousel.
,to access the call context car-
You can mute the microphone so that
If you select Mute, then Record dialogue, only the caller’s
voice is recorded.
your caller cannot hear you.
Mute
During a call, press
confirm by pressing
,, select Mute and
,.
2. Select Record dialogue and press
,. Press
c,,
or hang up to end the recording.
Unmute the microphone
3. In all cases, and when hanging up, an edit win-
To unmute the microphone during a
call, press , select Unmute and con-
. The microphone
dow allows you to name the recording.
,
firm by pressing
is unmuted.
4. Press
,
to save the recording, which is then
Unmute
,
available in the menu Multimedia
>
Sound album
.
Clear the call list
Record a conversation
To clear your call list, press
lect Call Info Call list
twice to reset the call list.
,
and se-
Reset. Press
>
>
In most countries, conversation record-
ing is subject to law regulation. We ad-
vise you to notify the caller if you intend
Reset
,
Record dialogue
Clear the SMS list
to record the conversation you have with them and only
record if they agree. You should also keep any recording
To clear the whole messages list at once, press
,and
select Messages
>
SMS
>
Read SMS
>
Delete all SMS. Press
,
twice to reset the SMS list.
Main features
13
Download from Www.Somanuals.com. All Manuals Search And Download.
You can also delete all the SMS messages from the SMS
Archive menu. Deleting your SMS list is useful to free
memory space in order to receive new messages.
Quickly scroll a list
When browsing a list (of ringers, events, etc.), press
0
to scroll page per page instead of item by item.
Clear the phonebook
Other features during a call
To clear the content of your phonebook at once, press
- Change the equalizer settings (see page 36),
- Add a name to the phonebook (see page 30),
- Write and send a message (see page 49),
- Read a message (see page 50),
- Consult your Call list (see page 79),
- Consult your Organiser (see page 75),
- Make a second call (see page 88).
,
and select Phonebook
>
Phonebook set.
>
Delete
all. Press to reset the phonebook content.
,
This option only applies to the phonebook in your
phone, NOT to the SIM phonebook.
14
Main features
Download from Www.Somanuals.com. All Manuals Search And Download.
3 • Menu tree
The table below describe the complete menu tree (first
to third levels) of your mobile phone, as well as the
page reference you should refer to for more informa-
tion concerning each feature or setting.
Security p42
Keypad lock / Public names / Call barring /
Change codes / PIN protection
Network p43
GPRS attach / Register again / Preferred list /
Access settings
Settings p36
Time and date p46
Clock display / Set date / Date format / Time
zone / Daylight saving / Set time
Sounds p36
Silent / Ringer volume / Ringer / Messages
Ringer / Equaliser / Key tones / Sounds Alerts
/ Vibra alert
Language p47
List of available languages
Display p37
Profiles p47
Screen saver / Animation / Backlight / Wall-
paper
Messages p49
Hotkeys p38
List of available hotkeys
SMS p49
Voice command p40
List of available voice commands
Send a SMS / Read SMS / SMS settings /
SMS Archive
Voice dial p41
Menu tree
15
Download from Www.Somanuals.com. All Manuals Search And Download.
E-Mail p52
For each available mail box
Settings / Open mailbox / Send mail
Demo mode p72
Memory Status p72
Sound recording p73
BeDJ p73
Broadcast Message p60
Reception / Topics / District codes
Instant message p60
MMS p61
Create an MMS / Receive an MMS / Manage
folders / Settings
Games & Appli. p74
Euro converter p74
Calculator p74
Multimedia p71
Camera p73
Picture album p71
List of available pictures
Alarm clock p74
Organiser p75
Sound album p71
List of available sounds
16
Menu tree
Download from Www.Somanuals.com. All Manuals Search And Download.
Brick Game p77
Operator services p87
Infrared p68
Data / Receive
Service numbers
The numbers available in this menu are
operator and subscription-dependent, please
check with your operator.
Call information p78
Call settings p78
WAP p82
Call forward / Mailboxes / Auto redial / Any
key answer / Call waiting / Caller ID
Services +
This menu is operator and subscription-depend-
ent, please check with your operator.
Call list p79
Call list / Reset
Call counters p80
GSM counters / GPRS counters
Phonebook p29
View names list
Phonebook settings
Delete all / Phonebook select. / Group set-
tings / Copy to phone
Menu tree
17
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use it?
Alphabets and symbols represented by each key are as
follows:
4 • Text or number entry
Text can be entered in editing screens in two different
ways: by using T9® predictive Text Input, or basic text
input. Two other modes for numbers and punctuation
marks, are also available. Icons appearing on the screen
show the active text mode.
2
0
to9
To key in letters.
Short press to browse the list of candi-
date words, long press to browse back.
To confirm entry.
1
c
Short press to clear one entry, long press
to clear all text.
T9® text Input
What is it?
Shift from standard, to lower, to upper
case.
Shift from basic mode, to numeric or to
punctuation typing mode.
#
*
T9® predictive Text Input is an intelli-
gent editing mode for messages, includ-
ing
a
comprehensive dictionary. It
Tegic Euro. Pat.
App. 0842463
allows you to quickly enter text. Press
only once on the key corresponding to
each letter needed to spell a word: key-
Example: how to enter the word «home»:
1. Press 4663The screen displays
the first word of a list: Good
.
strokes input are analysed and the word suggested by
T9® is displayed in the edit screen. If several words are
available according to the keys used, the word you en-
2. Press
3. You can press either
selection of the word Home. Pressing
0
to scroll and select Home
.
1
or
,
to confirm
also
>
tered is highlighted: press
0to browse the list and
confirms selection of the word and inserts a space,
ready for the next word of your message.
to choose from those proposed by the T9® built-in dic-
tionary (see example below).
18
Text or number entry
Download from Www.Somanuals.com. All Manuals Search And Download.
6
,
6
( 6(MNO), 3, 3(DEF).
MNO),
Basic text input
Press
,when the message is completed.
If you wish to access the basic text input, select «Abc»
Letters, numbers and symbols are located on each key
as follows:
1 2
basic text input using
multiple key presses to reach the desired character: the
letter «h» is the second letter on the key, so you
*key. This method requires
space 1 @ _ # = <
> ( ) & £ $ ¥
a b c 2 à ä å æ ç
4
must press it twice to enter «h». Using this mode re-
quires you press a key as many times as is equal to the
order of the letter.
To enter the word «Home» in basic text input mode,
you should therefore key in 4, 4(GHI) 6,
d e f 3 é è ꢀ ꢁ
3 4
g h i 4 ꢂ ì
j k l 5 ꢃ
m n o 6 ñ ò ö
t u v 8 ü ù
5 6
p q r s 7 ꢄ ꢅ ꢆ ꢇ
7 8
w x y z 9 ø ꢈ ꢉꢊ
9 0
. 0 , / : ; » ’ ! ¡ ? ¿ *
+ - %
Text or number entry
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Save the picture
Press
shot.
C
c
,
right after the
right after the
right after the
5 • Taking pictures
Your mobile phone features a digital camera that
allows you to take pictures, store them in your phone,
use them as wallpaper or send them to your friends and
relatives.
Delete the picture
Press
shot.
Access the
shot options
Press
shot.
How to...
Activate/deactivate
the self-timer
Press 0.
Activate/deactivate
the camera
Press the
and long press
deactivate.
C
key to activate,
Within any menu related to the camera, a long press on
the key will cancel any current action and bring
you back to idle mode.
c
to
c
Zoom in/out
Press the joystick key
+
Pictures shots
(up) or (down).
-
Change the
Camera mode
Press
*to toggle between
Preview mode settings
Night and Normal mode.
Press
Cto display the camera preview screen: the
lens of the camera is automatically focused. Icons
displayed on top and bottom of the screen allow you to
check the different Modes, and also to set the Self-timer
Change the
Picture resolution
Press to switch from
VGA to QVGA to SQVGA to
128 x 128
Press
is active.
#
.
activation
.
Access the
camera settings
,
when the camera
All options and key presses described in the present sec-
tion are applicable only when the camera mode is ac-
tive, i.e. when the preview is displayed on the screen
Take a picture
Press Cwhen the camera
is active.
Press
,to access any of them.
20
Taking pictures
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera mode
Two modes are available: Normal and Night mode
According to ambiant light level, press
between modes, which are reflected by the icons in the
bottom of the screen (sun & moon).
Picture resolution
The default picture size of the standard format is
Take a picture
.
With the
1. If the self-timer option is Off, and once the cam-
era was activated, press the key to take a pic-
Ckey
*to toggle
C
ture, which is then automatically displayed on the
screen.
128 x 128. Press
pixels), to Q VGA (320 x 240 pixels), to SQ VGA
(160 x 120 pixels) or to 128 x 128 The Picture
#
to switch to VGA (640 x 480
.
resolution you select is displayed in the bottom right
corner of the screen.
Zoom mode
This option is available in all modes: one-level zoom
(x2) in 128 x 128 mode, and two-levels zoom (x2 and
x4) in all the other modes. In any mode, press the
2. The number in the upper black bar of the screen
shows its row. The pictures will be named in the
Own pictures menu «img_1.jpg», etc., up to
9999.
navigation key
+or -to zoom in or out.
The zoom icon is highlighted when the zoom is activat-
ed. Zoom out is available only after a zoom in.
This does not mean you can take up to 9999 pictures
(see “Number of pictures” below), but that pictures, in-
cluding the ones you delete, are numbered up to 9999.
Numbering will then restart from 1 on.
Self-timer
This option allows you to set the Self-timer option On
or Off (see next section for details).
You can then choose to:
Press
c
C
To Delete the picture you have taken.
Press
To Save it.
Taking pictures
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Number of pictures
Press
,
c
To access the list of available options,
which are:
The number of pictures you can save in the phone will
vary according to the settings you have configured: the
higher the resolution, the bigger the file size.
-
Save the picture in the Picture
Album
Modify it,
Send it via MMS
,
-
-
-
A message will warn you if there isn’t enough memory
to store the picture you have just taken. In this case, you
must delete data (sounds, images, etc.) before storing a
new picture. Select Multimedia Memory status to check
the memory available in your phone.
,
Infrared or E-mail,
Take a new picture, which will bring
you back to the preview window.
>
Press
C
or To go back to preview mode.
Foto Talk: add voice to pictures
With the self-timer
This feature, which is available when using the camera
and also from the Picture album, allows you to quickly
send a message made of a picture and a sound.
1. If the self-timer option is On, press
Cto acti-
vate it (or press
0if the option is Off).
2. The count-down starts at -10 seconds (this value
cannot be changed). A beep is played 2 seconds
before the picture is taken, then again when it’s
actually shot.
The maximim size of an MMS is 50 KB.
1. When in idle mode, press
Cto activate the
camera.
Beep alarms can be customized via the camera settings.
2. Press
access the option and select Send by MMS
3. Press again to access the Voice memo
recording window.
Cto take a picture, then press ,to
At any time, press
to preview mode or press
c
to stop the timer and go back
to just stop the timer.
.
0
,
3. Once the picture is shot, follow the instructions
4. Press
,, select the person you want to send it
starting at point 2 of the previous section.
to and validate the list. Press
your message.
,twice to send
22
Taking pictures
Download from Www.Somanuals.com. All Manuals Search And Download.
Make a call
To make a call, you must first long press
This will send one message to one person, without text.
See “MMS” page 61 for details on this feature.
cto go
back to the idle screen. Then enter the number or select
a name of your phonebook, press to dial and press
to hang up.
Review the pictures
The pictures you save are automatically stored in the
(
)
Multimedia
a picture in the list and press
graphical display. Then press
next or previous picture, or
Rename the picture. Press
>
Picture album Own pictures menu. Select
>
>
to access the
Settings
+
,
or -to go to the
to Send Delete or
,
Further to the settings that are available directly within
the preview screen as described above, several menus
<to go back to the text
list.
also allow you to set other options. Press
camera mode is active to access them.
,while the
As mentionned earlier, Foto Talk is also available from
the Picture album menu.
In all cases, select an option, and press
next picture to be taken using this mode, or
cancel.
,
for the
to
c
Receive a call
When receiving a call while using the camera:
1. Answering the call will quit any action linked to
the camera: picture preview, picture shot, self-
timer, options browsing, etc. Your phone will
return to idle when you hang up. If you had taken
a picture that was not yet saved, it will be lost.
2. Rejecting the call will also quit any action linked
to the camera, and will bring you back to the pre-
view screen.
When quitting the camera application, settings you
have defined will be saved and available when reusing
the camera or until you change them again.
Colour mode
Allows you to choose a mode available from the
following: Colour Black & white, Sepia and Blue. The
,
effect will be applied to the picture according to the
mode you chose (e.g., Sepia will take a brown and beige
picture, giving the impression of an old-times picture).
The default mode is Colour
.
Taking pictures
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera mode
Picture resolution
Allows you to choose one of the two modes available:
Allows you to choose a resolution available among the
following: VGA (640 x 480 pixels), Q VGA (320 x 240
pixels), SQ VGA (160 x 120 pixels) and 128 x 128. The
Normal and Night. The default mode is Normal
.
Sound settings
default mode is 128 x 128
.
Both Alert and Shoot sounds can be set from this
menu. The first one occurs 2 seconds before the
picture is taken, the second one when it’s shot. In both
Picture quality
Allows you to choose an image quality available among
cases, select On, and press
available sounds. Select one of the sounds, or <New>to
,
to access the list of
the following: Low
,
Medium
,
High. The default mode is
Medium
.
create a new sound, then press
,to activate it.
Self-timer
See “Self-timer” page 21.
24
Taking pictures
Download from Www.Somanuals.com. All Manuals Search And Download.
Activate the
Tempo field
Press
#.
6 • Music & Mix
With BeDJ, you can create your own sound by using a
predefined BeDJ style (as explained below), or any SP-
MIDI or MIDI ring tones present in your phone, or
that you downloaded via WAP, Infrared, etc. (refer to
relevant chapters in the present user manual for com-
plete information). You can then send your own mix to
friends and relatives, use it as a ringer or an alarm, etc.
Open the track
selection list
Press and hold a key from
1to 9.
Open the
Help screen
Press
*
.
Open the
Options list
Press
,
.
How to...
Within BeDJ, the colour orange always shows the in-
formation currently in use, or a selected item.
Switch BeDJ On/ Press
Off Press
dia
b
,
to switch on OR
and select Multime-
Get started
>
BeDJ.
Activate tracks
1. Launch BeDJ by pressing the
Press and hold
to switch off.
b
1
or
c
bbutton, on
the top right corner of your mobile phone.
Activate/deactivate Press a key from
to
9.
a track
Press
cto deactivate all
tracks at once.
Record the mix
(start and stop)
Press0.
Music & Mix
25
Download from Www.Somanuals.com. All Manuals Search And Download.
2. In the BeDJ screen that appears, the default
music style is selected (e.g., Groovy, Techno, etc.).
3. In the upper left part of the screen, a small table
displays the current tempo value, the status of the
recording (Off by default) and the name of the
track.
cally played when selected), then press
confirm your choice.
,to
2. The name of the selected melody is displayed in
the upper part of the screen. Press to access
the instruments list used in this melody.
Instruments
>
4. In the bottom part of the screen, 9 tracks are
1. The current instrument used in the selected mel-
available, linked to keys
1to 9and which
ody is the first one highlighted in the list.
you can mix: press the key corresponding to the
track you want to activate.
A total of 16 tracks are available: press and hold
2. Move
-or +to select the next or previous
instrument, then press
,to select it.
Change the tempo
1. Press
2. The Tempo (displayed in bmp or «beats per
keys
Key
1
5
to
9to open the track selection list.
#to activate the Te mpo field.
is always dedicated to the voice track.
5. The activated track appears in orange, and the
above table displays the name of the relevant mel-
ody and instrument.
minute») applies to all tracks. Press the high-
lighted
it.
You don’t have to save the Tempo, which is auto-
matically taken into account.
<or >keys to increase or decrease
Change track melodies and instruments
Press and hold keys
1to 9according to the
track you would like to change. In the list that appears,
you can change first the current melody used by the se-
lected track, then the instruments used in the melody.
Melody
3. Press cor ,to go back one screen.
You cannot change a Te mpo while playing tracks or
during a mix recording.
1. The current melody used in the selected track is
the first one highlighted in the list. Move
+or
-
to select another one (which is automati-
26
Music & Mix
Download from Www.Somanuals.com. All Manuals Search And Download.
for you to choose from:
Record a mix
Remix
Allows you to record a new mix by
using the same tracks.
Start recording
1. When ready to record your mix, press
timer starts and the On air red icon is selected.
2. While recording your mix, you can:
0. The
Re-play
Store
Plays the mix you just recorded.
Opens the Save window, for you to
name and save your mix.
Press keys
To activate the relevant track.
1
to
9
Send by MMS
Allows you to send your mix as part
of a multimedia message (MMS).
Move
+
or
-
>
To increase/decrease the current
track volume.
Send by IrDA Activates IrDA so that you can send
your mix to another IrDA device.
Move
<
or
To highlight the previous or next
track.
Send by e-mail Opens the E-Mail menu so that you
can send your mix via e-mail.
3. Press
0to stop recording.
The recording you save will appear under the name of
The recording will stop automatically when the mix
reaches 50 KB (approximately 2 min). Capacity de-
pends on the memory available in your phone: select
your choice in Settings
>
Sounds
>
Ringer list as well as
in Multimedia Sound album. You can select it as a ring-
>
er for incoming calls and new events.
Multimedia
>
Memory Status for memory information.
Create your own style and mix
Manage the recording
As soon as you stop recording your mix, a window au-
tomatically opens and displays the following options
Advanced options allow you to create and mix your
own styles of music, either directly from the BeDJ
styles available (e.g. Groove, Techno, Disco, etc.), or
from the ringers list (e.g., Bach, Cool, Dream, etc.).
Music & Mix
27
Download from Www.Somanuals.com. All Manuals Search And Download.
to select one of them, then press
to key
4. Repeat these two steps to apply tracks of your
choice to keys to of the phone.
5. When ready, record your mix (see page 27).
6. Press twice to go back to normal mode.
,to apply it
The ringers list includes the MIDI files you might have
downloaded via e-mail, WAP, IrDA, etc.
1
.
2
9
From existing files
1. When the BeDJ screen is active, press
,to
,
access the options list.
2. When selecting Mix ringers or BeDJ styles, simply
Have fun and mix: you can apply any of the 16 tracks
of any ringer of your choice to to keys of your
phone! This makes thousands of possibilities that allow
choose one of the available melodies in the list
1
9
and press
,to confirm your choice.
3. The phone automatically goes back to the BeDJ
screen, and the melody associated to the ringer
you have selected is divided into tracks.
you to completely personalise your own mix.
Save your own styles
4. As described above, you can then activate and
You can save your own Style in the BeDJ styles menu,
and reuse it later to create another mix. This new style
will contain all the tracks you have mixed, but without
the effects applied to the mix.
deactivate tracks, record your mix, etc.
The number of active tracks depends on the melody you
have chosen.
Receive a call
From scratch
1. When selecting Advanced, BeDJ opens a com-
When receiving a call while BeDJ is activated, your
mobile phone will automatically mute the sound.
1. Answering the call will quit BeDJ and your phone
will return to idle when you hang up.
plete new set of empty tracks.
2. Press and hold
present in your phone appears on the screen.
Select one of them and press
3. A new list appears, showing all tracks of the
selected MIDI file (max.16). Move or
1: the list of all the MIDI files
,
.
2. Rejecting or ignoring the call will allow you to
stay in the BeDJ screen.
+
-
28
Music & Mix
Download from Www.Somanuals.com. All Manuals Search And Download.
in one of the Phonebooks, they will only be added to
the one you have selected.
7 • Phonebook
All operations described in this chapter require
the relevant Phonebook, whether in the SIM or
in the phone to be selected.
The Reset phonebook option does NOT apply to the
SIM phonebook.
Copy all to phone will copy the content of your SIM card
into your phone. Selecting this option twice will dupli-
cate all the names.
Your mobile phone has two phonebooks. The SIM
phonebook is located on the SIM card and the number
of entries depends on the card capacity.The second
phonebook is built into the mobile’s memory and can
hold up to 299 names.
SIM card phonebook
If you are using a SIM card for the first time, follow the
standard SIM card installation procedure as described
page 7, then go to the section titled “Add names in the
phonebook” below.
The SIM card capacity depends on the type of card you
have. Please check with your local dealer for full infor-
mation on this subject.
The phonebook located on your phone shares the mobile
capacity and memory with other features. As such, they
are inter-dependent: the more names you create, the less
events you can store and vice-versa. 299 is the maxi-
mum number of names and events cards, provided that
other features (memos, sounds, pictures, etc.) are not
using a significant amount of the phone’s memory.
Press
book set.
,
and select Phonebook
Phonebook select. Then press
+or -to select the phonebook
,
Phone-
,
Phonebook select.
located in your SIM card. Names added to this phone-
book can then be copied into the phonebook located in
your phone.
If you cancelled or aborted the automatic copy of your
SIM phonebook at very first switch, you can do it man-
The Phonebook menu allows you to select one of the
two available phonebooks: the one on your SIM card
or the one in your phone. When entering new names
ually : press
then Copy to phone
,
and select Phonebook
.
,
Phonebook set,
Phonebook
29
Download from Www.Somanuals.com. All Manuals Search And Download.
When you copy the contents of your
SIM phonebook into your phone, you
can still use the phonebook of your SIM
and press
,
.
In SIM card
A number can contain a maximum of 40 digits, de-
pending on your SIM card.
card, even though it features less fields of information.
Phone’s phonebook
Entering all numbers, including local ones with inter-
national prefix, country code and area code will allow
you to dial them from any location.
Your mobile phone only manages one phonebook at a
time and will ignore the information relative to the
other one: e.g., if «Smith» is present in both phonebooks
and if you delete it in the phone, it remains unchanged
in the SIM.
3. Select the type of number allocated to the name:
Phone
,
Fax or Data and press ,to confirm and
store this name in your phonebook.
In the phone
The default selected phonebook is the
one located in your phone. It can hold
The phonebook in your phone can holds more infor-
mation fields than the SIM card phonebook. Including
(in latin characters):
In phone
up to 299 names and can be reset at once
using the Reset phonebook option. Depending on SIM
card capacity, names added to this phonebook can
then be copied into the SIM phonebook (see “Copy to
SIM” page 34).
First and last names fields
Numbers fields
(Mobile, Work, etc.)
up to 20 characters
up to 40 digits
and 1 «+»
Extra fields (e-mail and note) up to 50 characters
Group selection 20 groups available
Add names in the phonebook
In the SIM card
To add a name in the SIM phonebook:
You can create up to 299 records, holding up to a max-
imum of 7 information fields for each, with a maxi-
mum of 5 numeric fields. For example, you can save 2
mobile numbers, 3 work numbers, an e-mail address
and a text note, all for the same person.
1. Press
-
to enter the phonebook, select New
,
then press
,
.
30
Phonebook
Download from Www.Somanuals.com. All Manuals Search And Download.
page 31 for complete information). When receiv-
ing a call from a contact associated to a group, the
melody and/or picture defined for this group will
automatically ring and/or appear on the screen.
Add a record in the phone’s phonebook
Add a name field
1. Press
and then press
2. Enter the last name of your contact and confirm
by pressing , then enter their first name and
confirm by pressing
-to enter the Phonebook, select <New>,
,
.
Own numbers
,
The Own numbers option that appears in your phone-
book should contain your own phone number. If not,
we advise that you enter your mobile number as well as
any other relevant information.
,
.
One of the two name fields can be empty, but not both.
To go back to the previous field, press
c.
Although all its fields can be empty, the «Own num-
bers» item cannot be deleted.
Add a number/text field
1. After entering the name of your contact, you will
be in the Number type menu. You can choose
from numerical fields (Mobile, Fax, Data, Pager,
Home, Work) or alphanumeric fields (Note, e-
mail). Make your selection and enter the relevant
number or text. Then press
record.
2. The phone will then prompt you the Group:
Fotocall: see & hear who’s calling
This feature is only available when you select the
phonebook of your phone, NOT the SIM phonebook.
,to save this new
The Fotocall feature allows you to personalize the
groups available with their own name («Friends», «Of-
fice», etc.), a given picture (from the Picture album) and
a given melody (from the Ringers list).
You can link one or several contacts from your phone-
book to a group. When a name in that group calls, the
contact’s name will appear along with the defined pic-
ture of that group. The melody defined for that group
will also ring.
choose the group you want this name to belong
to and press
saved in your phone’s phonebook.
,to confirm. The record is then
3. You can associate a specific Melody and Picture to
each group, as well as Rename groups. Select
Phonebook > Phonebook set. > Group settings
then refer to “Fotocall: see & hear who’s calling”
,
Phonebook
31
Download from Www.Somanuals.com. All Manuals Search And Download.
can search for a name in the phonebook by pressing the
corresponding key for the letter that you want to go to
For that important person, why not set up a group just
for them. Use the camera to save their picture in the Pic-
ture album and Sound recording to save their voice as a
ringer. When they call, you will truly be able to see and
hear them (for camera, see page 20 and for sound re-
cording, see page 71).
in the list (e.g., press
8twice to access the letter
«U»). The first record starting with this letter is selected
in the list. Depending on the phonebook menu you
have selected, you will have access to part or all of the
following options:
1. To use Fotocall, you need to be using the phone-
book in the phone; if you are not already doing
so, see “Copy the SIM phonebook” page 8.
• Delete
• Show
• Delete all
• Send an SMS • Include in a
• Change name
• Copy to SIM • Send an MMS
• Flash dial • Make default
• Change type • Copy to phone voice dial
• Call • Call handsfree • Send via IrDA
group
• Associate a
2. Then select Groups setting, press
,and select
the group of your choice.
3. Rename the group to be identified («Friends»,
«Kids», etc.) and select the Melody and the Picture
to be associated to this group.
In the SIM card
Select a name in the SIM card phonebook, then press
4. Long press
cto go back to idle, then -to
,
to access one of the following options:
display the content of your Phonebook. Select a
-
-
Delete to delete the selected name and number,
Change to change the selected name and all related
information,
Copy to phone to copy the selected name and all
related information into the phonebook located in
your phone.
contact you wish to link to this group and press
,
. Then choose Select group and select the
group of your choice.
-
When this contact calls you, the Melody and Pic-
ture associated to his group will ring/appear on
the screen.
- If you cancelled the automatic copy of the SIM
phonebook at the very first switch of your phone,
you need to do it manually.
Edit and manage names
Once you have stored names in your phonebook, press
-
when in idle mode to access the Phonebook. You
32
Phonebook
Download from Www.Somanuals.com. All Manuals Search And Download.
3. In the carousel that appears, select Change and
In the phone
Add a field
1. To add a new field to an existing record, select the
name of your choice, select Show and press
2. Select <New> and press . Choose the type of
field to be added and press . Enter the
number or text, then press to save changes.
3. Repeat steps 1 and 2 to add up to 6 fields to the
same record. Make a short press on to go
press
,
,
. Make the changes wanted and press
to save them.
Change a field type
,.
To change a field type of an existing
,
record, repeat steps 1 to 3 of the “Change
a field content” paragraph. Then select
,
Change type
,
Change type in the carousel menu, select the new type
of number and press to confirm your choice.
,
c
back to the previous menu, or a long press to go
back to the idle mode.
If you copied your SIM phonebook into your phone,
some numbers might appear as being of «No type» and
don’t have any icon. «No type» numbers can be
changed: follow the procedure described previously to
define a type for these numbers.
Numbers or text will appear in order of creation date.
The first fax or phone number you enter becomes the
default number. As such, it appears in first position in
the list. To make another number default, see “Make
default” page 33. Alphanumeric fields (note and e-
mail) can only be changed or deleted.
Delete a field
To delete a field of an existing record, re-
peat steps 1 to 3 of the “Change a field
content”paragraph. Then select Delete
Delete
Change a field content
1. To change the content of a field in an existing
in the carousel menu, and press
,to confirm.
Make default
record, select the name of your choice, press
The first number you enter when
creating new record becomes the
default number: it will appear first on the
fields list and is automatically called when pressing the
,
, select Show and press
2. Select the field to be changed in the list and press
,again.
a
Make default
,
.
pick-up key or when pressing
,
and selecting the
Phonebook
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Call
,
Call handsfree or Send SMS option. To change the
country. In most cases, you can call this number even
if your keypad is locked and if you haven’t yet entered
your PIN.
1. Depending on the network operator, the emer-
gency number can be dialled without the SIM
card being inserted. In Europe the standard emer-
gency number is 112, in the UK it is 999. To call
this number, enter it in idle mode by pressing the
default number (e.g. make the «Work» number default
instead of the «Home» number), repeat steps 1 to 3 of
the “Change a field content” paragraph. Then select
Make default in the carousel menu, and press
confirm.
,to
Copy to SIM
As mentioned earlier, entering names in
the SIM phonebook can be useful if you
change phones frequently. If you copy
corresponding keys, or press
,
and select
Emergency
Copy to SIM
Phonebook
number
2. Press
>
View Names List
>
.
phone numbers into the SIM card, your phonebook is
always updated when switching phonebooks or when
using another phone.
To copy a number into the SIM card phonebook, re-
peat steps 1 to 3 of the “Change a field content”para-
(
to dial and press )to hang up.
Other number
Enter a number
In idle mode, enter a number by pressing
the corresponding keys. Press to
dial and press to hang up.
graph. Then select Copy to SIM and press
,.
(
Call
Make calls
)
Pressing
,will let you access a carousel allowing
For your own comfort and safety, ensure you move the
phone away from your ear when calling handsfree, espe-
cially when increasing the volume.
you to call this number, store it or send a SMS.
Select a name
1. Press
-and select the record of your choice.
Emergency number
2. If you selected the phonebook in your SIM card:
The emergency number will call the
emergency services number in your
- once the record is selected, simply press
or
(to call,
SOS Call
34
Phonebook
Download from Www.Somanuals.com. All Manuals Search And Download.
- press
,twice to access the next carousel, then
You can also switch to handsfree while a standard call
is in progress: press , select Activ.h/free and press
to confirm.
select Call or Call handsfree and press
,to dial the
,
number.
,
3. If you selected the phonebook in your phone:
•
To call the default number:
Use Flash dial
In idle mode, press and hold a key be-
tween and to dial the associ-
ated entry (see “Hotkeys” page 38):
- once the record selected, simply press
(to dial,
or
2
9
- press
,to access the record carousel, then select
Flash dial
Call or Call handsfree
.
connection is established. Press
)
to hang up.
•
To call any other number, choose Show once the
Use Voice dial
record is selected and choose a number type in
the list (Mobile, Home, etc.). Press
the next carousel and select Call or Call handsfree
In idle mode, press and hold
,
, then
,to access
pronounce the saved voice tag (see
“Voice dial” page 41). If the phone rec-
.
Voice Dial
4. In all cases, press
)to hang up.
ognizes the voice tag, it dials the number associated
with it. Press to hang up.
)
Phonebook
35
Download from Www.Somanuals.com. All Manuals Search And Download.
tached to messages you receive (from e-mail, SMS,
etc.).
8 • Settings
to hear the selected melody being played. Press
select this melody as ringer,
the next melody.
+
or
-
and wait
to
cto cancel, or move to
The Settingsmenu allows you to customise your phone
and change the settings related to each available option
(sounds, time and date, security, etc.). The Profiles
menu allows you to change several settings at once (see
page 47).
,
You will not hear the melody if the volume ringer is set
to Off or if the Silence mode was activated (see page 11).
Sounds
Messages Ringer
Silent
Allows you to set an alert beep On or Off
,
Allows you to set the Silencemode On or
Off. When this setting is On, all alerts are
deactivated and the vibra alert is active.
for each time you receive a new message.
When On, this option also allows you to
Messages Ringer
Silent
select the alert of your choice from the ringers list.
The Silent mode also applies to key tones.
Equaliser
This option allows you to choose from
different audio settings, also available
while a call is in progress. In this case,
Ringer volume
By default the ringer volume can be set
Equaliser
to Medium. Press
volume of your ringer from Silent to In-
creasing
+or-to set the
Ringer volume
press
,, select Equaliser, scroll through the list and
wait a few seconds to hear the difference. Press
confirm your choice.
,to
.
Ringer
Key tones
Allows you to select the ringer tone from
the choices available. The list also in-
cludes the music mix you create with
Allows you to set the key tones On or
Off. Even when set Off, DTMF are
played during calls (see page 87).
Ringer
Key tones
BeDJ (see page 73), recorded sounds and melodies at-
36
Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
Sounds Alerts
Display
Allows you to set alert beeps On or Off
for the following items:
Screen saver
Sounds Alerts
Allows you to set the screen saver On or
Off. When On, it will run a slide show in
idle mode, by using the jpeg file(s) you
have stored in your phone and selected.
- when an Event you programmed in your organiser is
due,
Screen saver
- when you have missed a call,
- when the Battery is low and requires charging,
- to manage the duration of your calls, first after 45
seconds, then every minute of an ongoing call (the
beep cannot be heard by the caller).
Setting the Screen saver Off automatically activates the
Economy mode, i.e., the current time displayed on a
black background. This mode increases the autonomy
of your phone (increases your battery life).
This menu only allows you to activate/deactivate the
alert sounds, NOT the alerts themselves. E.g. setting the
event alert Off will not prevent your phone from dis-
playing the Reminder screen (if you programmed one),
but the corresponding sound will not be played.
1. When setting the screen saver On, select a picture
in the list that appears by pressing
(you deselect it also by pressing these keys), then
press to move to the next picture. Once you
<or>
-
selected the pictures of your choice, press
activate the screen saver.
,to
Vibra alert
Allows you to set the vibra alert On or Off
You must select several pictures (up to 10) in order to
display a slide show. When selecting only one picture to
be used as screen saver, only this picture will be dis-
played.
when receiving a call, when an event set
in the organiser is due, when you receive
Vibra alert
a message and when the alarm rings.
The vibra alert is always Off when you connect the
charger or the Cigarette Ligh er Adapter.
2. Select Start delay and press
+or -to
choose a value. When in idle mode, the screen
Settings
37
Download from Www.Somanuals.com. All Manuals Search And Download.
saver will start according to the time limit you
have set.
Wallpaper
Allows you to set the Wallpaper On or
Off. When On, the picture(s) you select-
ed is (are) displayed in Normal or Fade
3. Then select the Display period and press
,. The
Wallpaper
timing you have set will be applied between each
picture of the slideshow.
mode in idle mode, if you didn’t activate a slide show.
Animation
Only JPEG type pictures can be used as Wallpapers.
Allows you to set the animation of the
carousel menus On or Off. When On
this option will also scroll texts, such a
,
Hotkeys
Animation
Instead of entering the various menus and browsing
the lists, you can set up direct access to a specific func-
tion by linking it to a Hotkey. A long press on the key
will then automatically activate the function or call the
associated number (Flash dial).
message selected in the Read SMS menu.
Deactivating this function increases the autonomy of
your phone.
Backlight
You can only program keys
2to 9#, as
and
The backlight is activated when receiv-
ing incoming calls or messages, browsing
lists and menus, etc. Press+or -
keys (select language) and
0
1(call voice mail-
bags) are predefined and locked, preventing repro-
gramming. Depending on your service provider, other
hotkeys may be predefined and locked.
Backlight
to set the backlight Duration by selecting one of the
available values and press to confirm.
,
1. Select a key from 2to 9and press ,.
Deactivating this function increases the autonomy of
your phone.
2. Browse the list to select the function you wish to
associate with this key (see list following). Press
,
to confirm your choice.
If the selected key is already set, you can reprogram it:
select Settings
>
Hotkeys > a hotkey in the list. Press
38
Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
,
twice, select Change and press
bring you to the list of available functions.
,. This will
Activates the Car profile (ringer vol-
ume high, any key answer).
Activate Car
Activates the Headset profile (ringer
volume medium, any key answer on).
3. To use the hotkeys, simply press and hold the key
corresponding to the function you want to launch
or to the number you want to dial while in idle
mode.
Activ. Headset
Activates the Meeting profile (vibra on,
ringer and all keys set to silent).
Meeting
You can associate hotkeys
tions of the following table:
2to 9to the func-
Activates the Outdoors profile (ringer
volume high).
Activ.Outdoors
Activ. Personal
Activ. Autonomy
Dials the associated number of the
phonebook.
Flash Dial
Activates the Personal profile.
Activates the Autonomy profile, which
extends the battery autonomy (anima-
tion off, vibra off, backlight off, ringer
volume medium).
Opens the Send Messages menu.
Send SMS
Read SMS
Opens the Read Messages menu.
Activates the Instant message feature,
to quickly Reply to the sender of the
received message.
Direct access to the Calculator
.
Calculator
Instant message
Redials the last number called.
Immediately locks / unlocks the key-
pad.
Redial last no.
Keypad lock
Redials the number of the last call re-
ceived.
Activates the Silence profile (vibra on,
ringer volume off).
Reply last no.
SOS call
Active. Silence
Dials the emergency call number.
Settings
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Forwards ALL calls to the voice mail-
Opens the E-mail menu for access to
the mail boxes.
box.
To voice mail
Brick Game
E-mail
Displays the remaining credit balance.
Direct access to the Brick Game
.
Subscription dependent
Show balance
Accum. cost
Dials the number of your voice mail-
box.
Displays the Accumulated cost of out-
going calls.
Voice mail box
Games
Opens the Games menu.
Subscription dependent
Subscription dependent
Opens the Add event menu of the Or-
ganiser.
Direct access to the Euro converter
(from currency).
Add new event
Show events
-> Euro
Euro ->
Displays the Events list of the Organ-
iser menu.
Direct access to the Euro converter (to
currency).
The Euro converter is available upon
subscription and only in countries us-
ing the Euro.
Opens the Alarm menu.
Alarm Clock
Record
Allows to record a new sound.
Voice command
Launches a WAP session.
Instead of entering the various menus
and browsing the lists, you can also set a
voice tag that will activate a feature (e.g.,
Subscription dependent
WAP
Voice Command
Opens the Screen saver On/Off menu.
launch the Calculator).
Screen saver
40
Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Select Settings
>
Voice dial
>
<New> and press
You can associate a Voice command to all the functions
supported by the Hotkeys (see page 38), except for «Get
mail» and «Alarm clock».
,
.
2. Browse the list to select the call number to be set
with a voice tag. Depending on the selected
phonebook (see “Phonebook” page 29):
1. Select Settings
>
Voice Command
>
<New> and
press , then browse the list to select the func-
,
-SIM phonebook: select a name in the list and
tion to be set with a voice tag. Press
firm your choice.
,to con-
press
,,
-Phone’s phonebook: select a name in the list,
then the phone number of your choice if sev-
eral numbers were stored for this name and
2. When Press OK and speak appears, follow the
instructions displayed on the screen. When
prompted to record your voice tag, make sure you
are in a quiet environment, choose a short and
simple word and clearly pronounce it.
press
,.
3. When Add voice tag? appears, press
,
and fol-
low the instructions displayed on the screen.
When prompted to record your voice tag, make
sure you are in a quiet environment, choose a
short and simple word and clearly pronounce it.
3. Press
cand repeat the steps described above to
add more voice commands.
To use the voice command, press and hold
,when
To use the voice command, press and hold
in idle mode, then say the voice tag corresponding to
the number you want to dial.
To display the list of voice dials you have defined, se-
,when
in idle mode, then say the recorded voice tag. Words
recorded as voice tags can be played, changed or
deleted at any time.
Voice dial
lect Settings
>
Voice Commands or Voice dial and press
,
. Words recorded as voice tags can be played,
changed or deleted at any time.
Voice dial allows you to quickly call a
name from your phonebook: set a voice
tag by recording a word that will call the
Voice Dial
Up to 15 voice tags can be defined and shared between
voice dial and voice command.
corresponding name when pronounced.
Settings
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Call restriction
Allows you restrict the calls to the Public
Security
Keypad lock
Names list. In this case, you can only ac-
cess the names of the Public names list, as
opposed to the Phonebook of the main menu.
Call restriction
Allows you to lock/unlock your keypad
by pressing and holding the key
when in idle mode. The keypad auto-
c
Keypad lock
This function is subscription dependent and requires a
PIN2 code (see page 43). Please note that when activat-
ing this option, it might also apply to WAP and e-mail
connections over GPRS.
matically unlocks when receiving a call.
You can also choose immediate or delayed lock by se-
lecting Settings
values by pressing
be permanently locked. If you unlock it by pressing the
key, it will be temporarily unlocked while you use
>
Security
>
Keypad lock, then one of the
-. Your keypad will then
+
or
Public names
Allows you to consult and modify your
Public Names list. You can enter a new
name, modify or delete a name in the list
c
your phone, and locked again after the time period you
selected.
Public names
via PIN2 code. Use the <New> option to enter the
name and phone number, then select the number type:
Phone Fax or Data. Names in this list can be changed
Note that even when your keypad is locked, you can still
place an SOS call (see page 34).
,
or deleted.
Public names
Call barring
Allows you to manage a specific names
This menu allows you to limit the use of
your phone to specific calls by letting
you bar both outgoing and incoming
list, called Public Names list, and restrict
calls to this list via the Call restrictionop-
tion.
Public names
Call barring
calls. This function is network dependent and requires
a specific call barring password supplied by your service
provider.
This feature is subscription dependent and requires a
PIN2 code (see page 43).
42
Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
Outgoing calls
The Outgoing menu allows you to select
Depending on your SIM card, some features or options
may require a PIN2 secret code. This is a second secret
4 to 8-digit code given to you by your operator.
between All calls, International calls and
Intl. Exc. Home calls (the latter allowing
Outgoing
If you enter a wrong PIN2 code 3 times, your SIM card
is blocked. To unblock it, request the PUK2 code from
your operator or retailer.
If you enter an incorrect PUK code 10 times in a row,
the SIM card will be blocked and unusable. If this hap-
pens, contact your operator or retailer.
you to call your home country when you are abroad).
You can also Deactivate the bar on outgoing calls.
These menus then allow you to bar, within each avail-
able option, All calls Voice calls, Data calls or Fax calls.
,
Incoming calls
The Incoming menu allows you to select
All calls or When roaming. It also pro-
vides access to the Cancel menu to re-
PIN protection
Incoming
This allows you to set the PIN protec-
move bar on incoming calls.
These menus then allow you to bar, within each avail-
tion On or Off. When On, you will be
asked to enter your PIN code when
PIN protection
able option, All calls Voice calls, Data calls or Fax calls.
,
switching your phone on.
Status
You cannot change your PIN code if this option is Off
.
In each sub-menu (All calls, When
roaming, etc.), the Status option allows
you to know whether a type of call is
barred or not.
Status
Network
This menu allows you to handle the connection be-
tween the phone and the network, register manually
the available networks and manage your preferred net-
works.
Change codes
Allows you to change your PIN and
PIN 2 codes, as well as the call Barring
code
Change codes
.
Settings
43
Download from Www.Somanuals.com. All Manuals Search And Download.
GPRS attach
Your mobile integrates features that sup-
In spite of these settings, you must still select the bearer
(GSM or GPRS) in the menus of each application to be
used (e.g., WAP, MMS, e-mail, etc.).
port GPRS (Global Packet Radio Serv-
ice), a service allowing you to exchange
GPRS attach
Register again
data with high speed rates and to stay always on-line
(i.e. have a permanent connection to the Internet and
WAP).
Provides you with a list of the networks
available in the area when the Manual
mode is selected. Select the network you
Register again
Contact your phone operator to have full information
about GPRS availability over their network and for an
appropriate subscription. You might also need to con-
figure your phone with the GPRS settings supplied by
your operator, by using the menus described in this sec-
tion.
want to register with and press
,to confirm.
Preferred list
Allows you to build a network list in or-
der of preference. Once defined, the
phone will try to register on a network,
according to your preferences.
Preferred list
This menu allows you to define the attach mode of
your mobile phone to the GPRS service:
Always on
Your phone will always register to the GPRS service.
This option allows faster GPRS connection. However
it will increase energy consumption.
Access settings
This menu allows you to create several
data profiles: when using WAP or when
sending a multimedia message (MMS),
Access settings
the selected profile will be used to connect to the GSM
or GPRS network.
For data calls
Your phone will automatically register to the GPRS
service only when required. This option reduces energy
consumption, however it will increase the connection
delay.
All options described below are operator and/or sub-
scription dependent.With some operators, you may re-
ceive a SMS which contains access parameters that will
44
Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
be stored automatically. Please contact your network
operator for detailed information on this subject.
In both cases, enter the «+» sign followed by the
number provided by your operator and press
,
.
Change name
Contact your operator to know what type of number
you should select.
Allows you to enter or change the name
of the selected profile. Press
the name of your choice and press
,, enter
Inactivity time allows you to enter an inactivity time pe-
riod after which the phone automatically disconnects
(if a connection was in progress) and returns to idle
Change name
,
to confirm.
Some pre-configured profiles might be locked, prevent-
ing re-programming and renaming.
screen. Select Inactivity time and press
a value (in seconds) of over 30 s. and press
,, then enter
,.
GPRS settings
Show
This allows you to change the GPRS set-
tings, Login Password and Inactivity time
(the same fields and the same instruc-
Allows you to visualise all parameters of
the selected profile (ISP number, APN,
,
GPRS settings
Show
etc.), either GSM or GPRS
.
tions as for GSM settings, please refer to the previous
section).
APN allows you to enter the address of the external data
network you want to connect to, a text string (or IP ad-
dress, e.g., wap.operatorname.fr) used to establish the
GSM settings
Allows you to enter or change the GSM
settings and gives you access to the fol-
lowing items:
GSM settings
Login and Password allow you to enter the login and
password needed. In both cases, enter the information
,to confirm.
Phone Number allows you to enter the phone number
connection. Select APN and press
,
, then enter the
appropriate address and press
,
.
and press
Error messages during connections are mainly due to
incorrect parameters: you should contact your operator
before first use, in order to have the appropriate set-
tings. With some operators, the access parameters can
be set remotely. Please check with your operator.
needed to establish a connection. Select Phone numbers
and press
,
, then press
ISDN No. to enter an ISDN ISP number, OR
Analogic No. to enter an analogic number.
+or -to select:
-
-
Settings
45
Download from Www.Somanuals.com. All Manuals Search And Download.
ously set. To know which time zone you are in, we rec-
ommend you to check in an atlas or an encyclopedia.
Time and date
This menu allows you to set the time and date, time
zone, daylight savings, and change the clock display
mode.
The Time zone option allows you to set
the time zone you belong to, according
to GMT (Greenwich Meridian Time).
Time zone
Clock display
Move
your area.
+or-to select the setting corresponding to
Allows you to select Analogue
Tiny time formats when shown in idle
mode, by pressing or . In all
cases, press to confirm.
,
Digital or
Daylight saving
Clock display
+
-
,
This setting only concerns countries in which time is set
according to summer/winter time (e.g. Greenwich Me-
ridian Time / British Summer Time).
Set date
Allows you to set the date by pressing the
appropriate numeric keys (you can also
set the date by moving
This option allows you to set the
Set date
+
or
-
).
daylight savings to On (in summer time)
or Off (in winter time) by
Daylight saving
Press to confirm.
,
moving+or-. As this setting impacts the date
Date format
Allows you to select one of the two avail-
able date formats, either Western or Thai
Press to confirm.
and time option, it should be set first. If daylight saving
is On and you set the time to 12:00, it will
automatically switch to 13:00 when turning the option
.
Date format
,
to Off
.
Time zone
Set time
Allows you to set the time by pressing
The time zone and daylight savings are to be set first.
You should then double-check date and time if previ-
the
appropriate
keys
or
Set time
moving
+
or to
-
increase
or
decrease the time minute by minute.
46
Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
The settings listed in the column Personal, in the fol-
lowing table, are default settings preset during produc-
tion. As you can change them, the personal settings in
your phone may differ from the table.
Language
This menu allows you to select a language for all menu
text. A long press on
tomatically displays this menu.
0when in the idle screen au-
Each
box of the table refers to the settings as
stored in the Personal menu (whether you have
changed the settings or not).
Profiles
This menu allows you to access a group of predefined
settings, which let you quickly adapt your phone to
your environment by changing several settings at once.
For example, selecting Meeting will set your ringer vol-
ume to silent, activate vibra and deactivate the key
tones (the other items are set according to the settings
you configured). When your meeting is over, selecting
Personal will reactivate all your usual settings.
Profiles
*
Personal
Meeting
Autonomy
Outdoors
Vibra alert
On*
Off
On
Ringer volume Medium* Medium High Silent
Key tones
On*
On*
On*
Off
Organiser alerts
Battery low alert
Message alert
Backlight
Any key answers
Animation
On*
When you associate a hotkey to a profile (e.g. long press
key
3
activates Meeting, see “Hotkeys” page 38),
10 sec* Off
Off*
also long press this key to deactivate it and go back to
the Personal settings.
On*
Off
* personal setting
Settings
47
Download from Www.Somanuals.com. All Manuals Search And Download.
When connecting an accessory, the settings described
in the table below also become available. When discon-
necting the accessory, the phone goes back to the Per-
sonal profile.
Accessories
Profiles
CLA or
Charger
Activate Car
Headset
Organiser alerts
Battery low alert
Message alert
Backlight
Any key answers
Animation
Accessories
Profiles
CLA or
Charger
Activate Car
Off
Headset
On
On
Vibra alert
Off
On
Ringer volume
Key tones
Medium
High
48
Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
Send a SMS
To a name in the list
9 • Messages
To the default number if several (phonebook in phone)
or to the unique phone number (phonebook in SIM)
SMS
1. Press
-, select the name of your choice and
The Send SMS item of the Messages menu
allows you to:
press
,.
2. Select Send SMS and press
,
, then select the
. Enter
Send SMS
type of message to be sent and press
your message, attach a graphic or a sound if you
,
•
send a standard or customised short text message
to someone,
wish, then select Send now or Save (see below).
•
•
edit the last message sent and send it again,
add an iMelody, pre-defined sounds, an anima-
tion or a picture to your message.
To the number of your choice (phone name list only)
1. Press
then press
2. Select the number of your choice and press
-
and select the record of your choice,
,
, select Show and press
,
.
The features above are not available from the idle mode
when the Instant message feature is On (see page 60). In
this case, you can only access the Answer option.
,
.
3. Proceed as described in step 2 of the previous
paragraph.
To any other name
To send a short message to someone whose number
The Standard SMS messages are displayed in a list.
Press
+or -to browse: for example Please call
me back at... allows you to select a pre-configured mes-
sage including your number, if this number is the first
one of the Own num. option (see page 31).
isn’t stored in the phonebook, press
Messages SMS then Send SMS and New. Enter the
phone number to which the message should be sent to
and press . Then follow the instructions detailed
above to send a message.
,and select
,
,
Messages
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Together with an attachment
Send now
This option allows you to attach a sound, icon or ani-
This allows you to send the current mes-
sage you have entered (to learn how to
enter text and numbers, see “Text or
mation to your message and press
,to confirm and
Send now
attach it to your message. Depending on the type of file
you want to attach, select Add graphic to attach a bit-
map image or an animation, and/or Add sound to at-
tach a melody. Select the sub-menu of your choice,
then one of the available items in the list that appears,
number entry” page 18). Press
confirm.
,to
Save
Allows you to store the current message
and its associated icon and melody if
and press
sage.
,to confirm and attach it to your mes-
Save
any. Press
,to confirm.
Read SMS
You can send up to 2 attachments of 2 different types
together with your SMS. Animations and pictures are
exclusive: if you first select an animation, then a pic-
ture, only the picture will be taken into account and
vice-versa.
The Read SMS option in the Messages
menu allows you to consult the list of
SMS you have saved and received, and
Read SMS
that are first stored on your SIM card. Several options
allow you to then manage them directly on your mo-
bile phone.
Received Messages
- The messages you have received and already read are
labelled with
Some icons, animations and sounds are pre-defined
and supplied as standard with your mobile phone. Per-
sonal pictures and sounds, e.g., that you have received
via SMS or e-mail and then stored in the relevant men-
us, will automatically appear in the «Own» sub-menus
(Own melodies, Own animations, etc.). You cannot
send «Own» items via SMS when they are copyright-
protected.
. Messages received but not yet
read are labelled with a sealed envelope icon. Select a
message and press to read it. When displayed,
to access the following options:
,
press
,
-
-
Reply to the sender,
Forward the selected message (choose the recipient
in the phonebook or enter a phone number manu-
ally),
50
Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
-
-
Delete the selected message,
(see page 52). Select the message you want and press
to read it. When displayed, press to access
the same options, including storing the caller’s
number.
Store number of the sender if it is attached to the
message,
,
,
-
-
-
Store melody if a melody was sent together with the
SMS,
Delete all SMS
Store graphic(s) if one or several graphics and/or ani-
mations were sent together with the message,
Extract a number included in the message itself, if
this number is included in double quotes (several
numbers can be included and extracted),
Call the sender of the message (operator-dependent),
Move to Archive allows you to store read messages in
the phone memory. Saved messages can then be con-
Allows you to delete all the messages of either the Read
SMS (messages on SIM card) or SMS Archive (messages
in phone) lists of the Messages menu.
SMS settings
-
-
This menu allows you to customise your
SMS via the options described below.
SMS settings
sulted by pressing
Archive
,and selecting Messages, SMS
,
SMS centre
Allows you to select your default SMS
centre. If not available on your SIM card,
you must enter your SMS centre number.
Moving a message to the archive list deletes it from the
read SMS list.
SMS centre
-
Edit a message in the Read or Archive folder, modifiy
it and resend it to someone (you can add a picture or
a sound).
Signature
Allows you to sign your SMS. By default,
your signature is you phone number,
added at the end of your message (which
Signature
If a picture or a sound was attached to the message you
edit, you must first detach it and store it in the Picture
album or in the Own melodies menu of the ringers list.
Then re-attach it to your message (see page 50).
length is consequently reduced). You can Edit the sig-
nature, Change and Save it.
Saved Messages
The messages you sent are labelled with
in normal
mode or with a mail box icon in auto save SMS mode
Messages
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Validity period
SMS Archive
Allows you to consult all read messages
This feature is subscription dependent.
you saved and to Reset all archived mes-
sages at once. You save a message by acti-
Allows you to select the length of time
SMS Archive
your message is to be stored in your SMS
centre. This is useful when the recipient
vating the Auto save SMS option (see above), or by
selecting a received message, pressing twice and
selecting Move to Archive
Validity period
,
is not connected to the network (and thus cannot re-
ceive your message immediately).
Reply path
.
E-Mail
This feature is subscription dependent.
If not included in your phone subscription, you must
subscribe to an e-mail account (over the phone or via
Internet from a computer) and have received the set-
tings information from your provider. In this case, all
parameters are communicated to you by your provider
and/or operator as described below and must be entered
as given.
If included in your subscription, you simply have to en-
ter the login, password and e-mail address of your
e-mail account. In some cases, your operator might also
be your e-mail service provider.
Allows you to set the Reply path option
On or Off. When On, it allows you to
transmit the number of your SMS mes-
Reply path
sage centre together with the message. Your corre-
spondent can then reply using your own SMS centre
and not theirs. This speeds up the rate of transmission.
Delivery report
This feature is subscription dependent.
Informs you via an SMS whether your
SMS was received or not. This option
Your phone might have been pre-configured. In this case,
most parameters are already set and you don’t have to
Delivery report
can be set On or Off
.
Auto save SMS
change them (except for Login Password and E-mail ad-
,
Allows you to set On or Off the option of
automatically saving messages sent in the
Archive menu.
dress which are up to you when creating an e-mail ac-
count).
Auto save SMS
52
Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
To enter text and numbers, including specific signs such
as @ or %, see the characters table described page 19.
Selecting this option you need to have both GSM and
GPRS settings configured.
GPRS settings
Settings
Network access
This menu allows you to configure your phone and to
handle the connection to the network, whether GSM
or GPRS, in order to then connect to the appropriate
server that will let you send and receive e-mails.
This menu allows you to enter or change
the GPRS settings communicated to you
GPRS Settings
by your operator, which are: APN, Login
and Password. All settings must be entered as given to
you by your operator.
Error messages during connections are mainly due to
incorrect parameters: you should contact your operator
before first use, in order to have the appropriate GPRS
parameters.
All options described below are operator and/or sub-
scription dependent.
1. Press
Settings and press
2. Select Network Access and press
,
, select Messages
>
E-mail
>
E-mail 1
>
,
.
GSM settings
,.
This menu allows you to enter or change
the GSM settings communicated to you
by your operator, which are: Phone
Bearer
This menu allows you to select the type
of network used when launching a con-
nection.
GSM Settings
number
,
Auto disconnection, Login and Password. Enter
Bearer
them as defined.
Phone Number: allows you to enter the phone number
provided by your ISP and needed to establish a connec-
GSM or GPRS: your mobile will only use the GSM or
the GPRS network for e-mail connections.
GPRS first: your mobile will first try to connect to the
GPRS network, then to the GSM network if the GPRS
network isn’t available when connecting.
tion. Press
-
+-to select:
or
ISDN number to enter an ISDN ISP number, OR
Analogic No. to enter an analogic number, then press
-
,
.
Messages
53
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
POP3 address: allows you to enter the IP or DNS
address of the POP3 server, which is used to
receive e-mails.
SMTP address: allows you to enter the IP or DNS
address of the SMTP server, which is used to send
e-mails.
Contact your ISP to know what type of number you
should select.
Auto disconnection: allows you to select an inactivity
time period after which the phone automatically dis-
connects (if a connection was is progress) from the net-
work. Press
10min. and press
+
or
,
-
to select a value from 3 to
to validate.
WARNING ! Network-dependent! For an e-mail connection
via GPRS, if your phone operator is not your e-mail provider,
contact your operator to get the correct address of the SMTP
server and enter it in this field.
The lack of exchanges with the network (connecting,
sending an e-mail, disconnecting) defines the inactivity
time period leading to auto disconnection.
In some cases, Login Password and E-mail address are up
,
Login and Password were up to you when you sub-
scribed to your account. Enter them also as defined.
E-mail server access
to you when you subscribe to your account. Enter
them as defined.
Account name
The menus described in this section feature settings
needed to connect to the e-mail server of your Internet
Service Provider (ISP) via your mobile phone. Most
parameters are communicated to you by your service
provider and must be entered as given.
This menu allows you to rename the available e-mail
accounts.
An e-mail account might be preconfigured with the
name of your operator. In this case, its name cannot be
changed.
1. Press
Settings and press
2. Select E-Mail server and press
be completed are the following: POP3 address
SMTP address Login Password and E-Mail address.
,
, select Messages
>
E-mail
>
E-mail 1
>
,
.
1. Press
,
, select Messages
Account name and press
>
E-mail
>
E-mail 1
>
,
. The fields to
Settings
>
,.
,
2. Enter the new name in the edition window that
,
,
appears and press
,.
54
Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced
forwarded and the attachments visualised with the ap-
propriate software.
To one or several recipients
The menus described in this section feature advanced
settings that may have been pre-configured, so you
shouldn’t have to change any of them.
1. Press
or E-mail 2 depending on the one you wish to use.
Select Send mail and press
2. Move to select Add addressee and press
to access the list.
,
, select Messages
>
E-mail, then E-mail 1
If the fields of these menus are empty, or if you encoun-
ter connection problems, contact your ISP.
,
.
-
,
Port POP3: allows you to enter the POP3 port number,
which is used to receive e-mails.
Port SMTP: allows you to enter the SMTP port
number, which is used to send e-mails.
DNS address: allows you to enter the DNS address of
the external data network you want to connect to.
SMPT authenticat.: allows you to activate/deactivate the
authentication process with the SMTP server.
If you select the phonebook «On SIM card», you will
not be able to access any e-mail address, but an edit
window will allow you to enter one. See “Phonebook”
page 29 for information on phonebook selection.
3. Select a name in the list and press
,to add it
to your mailing list or press to cancel and go
c
back to the previous sub-menu.
In most European countries, this menu should be set to
Off: your e-mails will NOT be sent if set to On. Contact
your provider for complete information.
4. Back to the Addressees list, press
,to Change
the e-mail address or to Remove it from the list, or
select Add addressee, press to access the
,
phonebook again and add new names to the mail-
Write and send an e-mail
ing list.
The Send mail menu allows you to send
e-mails to one or several recipients at a
time, including with an attachment such
5. Repeat steps 2 to 4 to add as many recipients as
Send mail
required.
6. Select Validate list and press
subject of your e-mail (you can leave this field
empty) and press
,. Then enter the
as a jpeg picture. Once received, your messages can be
,
.
Messages
55
Download from Www.Somanuals.com. All Manuals Search And Download.
7. In the next window, enter the text of your e-mail
e-mail connection. In this case, and if you accept the
incoming call, your phone switches to the call screen
context and the e-mail menu is closed; the phone goes
back to idle when you hang up.
With a sound or a picture
1. Repeat steps 1 to 7 described above. Select Add
(you can also leave this field empty). Press
when you are ready to send your e-mail.
,
To learn how to enter text, see “Text or number entry”
page 18. If you exit the Send e-mail menu before sending
your e-mail, its content is deleted without being stored.
sound or Add graphic and press
2. In both cases, a list appears, showing the available
,.
8. Select Modify mail and press
,if you want to
change the content of your e-mail. This takes you
back to step 2: follow the instructions from there
to complete the list of recipients and send your
e-mail.
JPEG, BMP, GIF or Midi files. Select the picture
and/or sound of your choice and press
,.
You can only attach one JPEG file at a time. If you exit
the Send e-mail menu before sending your e-mail, its
content (including attachment) is deleted without be-
ing stored.
9. Select Send now and press
,to send your
e-mail. Your mobile phone connects to the Inter-
net server, sends your e-mail to the names present
in your mailing list, then disconnects.
3. Select Modify mail or Send now and press
,to
confirm.
You can cancel this operation by pressing and holding
Receive and read e-mails
the
ckey. Your mobile will then disconnect from
the server, exit the e-mail menu and go back to idle.
Disconnection also occurs each time you enter the Set-
tings menu while a connection is in progress. In this
case, your e-mail is lost.
E-mails are received on a server, which
you must connect to in order to retrieve
your e-mails on your mobile phone
Open mailbox
(some operators send you a SMS when you receive a
new e-mail). You must first download the headers from
the server before retrieving the corresponding e-mails.
Depending on the call settings you configured (see
“Call waiting” page 79), you can receive calls during an
56
Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect to the server
Connection process
Headers information
Select a header, press
,, select Details and press
,
E-mail, then E-
again to see the address it was sent from, the date
1. Press
,
and select Messages
>
and time at which it was sent, its subject and the size of
the attachment if any. The following status icons may
appear in regards to each header:
mail 1 or E-mail 2 depending on the one you wish
to use. Select Open mailbox and press
,
.
Mailboxes 1 and 2 feature the same settings and op-
tions. Configuring them differently will allow you to
have two different e-mail addresses from your phone.
[No icon] The e-mail can be downloaded.
The e-mail size is too large, it cannot be
downloaded.
2. Your mobile phone automatically connects to the
e-mail server and downloads the e-mail headers.
If you didn’t receive any e-mail, List empty is dis-
played on the screen. Otherwise, the e-mail head-
ers are displayed in the form of a list.
3. The total number of mails received and pending
on the server is displayed on the top of the screen,
as well as the number of pages needed to display
all headers.
4. Your mobile phone retrieves five e-mail headers at
a time. If Next (respectively Previous) appears at
the end (respectively beginning) of the list, other
e-mail headers are pending: select one of the
The e-mail is marked to be deleted (see
page 59).
Download e-mails
Simply select one of the retrieved e-mail
headers and press
mail and press
,
. Then select Get
to download the
Get mail
,
e-mail. Repeat this operation to download each e-mail
corresponding to each selected header.
You can also press
,to access the e-mail headers’
carousel and select Get mail from the available options.
If the e-mail is too big (over 50 KB), it is rejected and
the download is cancelled.
available options and press
,to retrieve them.
An e-mail without any attachment may be automati-
cally displayed in the details screen.
Messages
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Get and store attachments
A picture in JPEG, BMP or GIF format is at-
tached to this e-mail. Select the attached picture
If the e-mail you have received contains attachments
(JPEG picture, text file or another e-mail), they are
characterised by a specific icon:
in the list and press
,twice to store it in
your mobile phone (you can rename it if you
wish).
Contains the details of the e-mail header (date
and time, sender’s e-mail address, etc.), press
You must have stored a picture before being able to
view it via the Picture album menu. See “Picture al-
bum” page 71 for more details. If there isn’t enough
memory to store the new picture, you must delete other
items (name, event or picture) to release enough mem-
ory to be able to save the new picture.
,
to display these details.
The text of the e-mail itself can be viewed as an
attachment, press to read it. There isn’t
,
any advanced options in this situation: it can be
read, but not stored nor forwarded.
A text file (text only, «.txt» format) is attached
A picture may not be accepted by your mobile phone
if it is too large, or if it doesn’t have the right file for-
mat. When receiving a picture via e-mail, proceed as
follows to obtain optimal results:
to the e-mail, press
any advanced options in this situation either.
,to read it. There isn’t
The application needed to manage this attach-
ment isn’t available in your phone, or the e-mail
is too large to be uploaded.
•
•
•
The picture received must have been saved in
JPEG, BMP or GIF format.
The size of the picture file should not exceed
50 KB.
The optimal size is 128 x 128 pixels, in order to
be displayed correctly. We recommend you use a
standard picture editing software to create the size
of the picture you want.
Another e-mail is attached to the one you re-
ceived (up to five e-mails can be attached one
after the other). There isn’t any advanced op-
tions for an attached e-mail: it can be read, but
not stored nor forwarded.
•
Use a file name, a maximum of 10 characters. You
can then add an extension such as «.jpg».
58
Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
Add an e-mail address to the phonebook
To unmark the e-mail to be deleted, select this option
again.
You must have selected the phonebook in your phone to
be able to add an e-mail address; this menu item will
NOT appear if you selected the SIM phonebook.
3. When you exit the E-mail menu, you will be asked
to confirm deletion of the selected item(s) from
You can add the sender’s e-mail address
to your phonebook, even when you ha-
ven’t yet downloaded his e-mail (retriev-
the e-mail server. Press
,to confirm or c
to cancel (in this case, the marked e-mails remain
in the list and aren’t marked to be deleted any
more).
Add to names
ing the header only is sufficient to access the e-mail
address).
Reply to an e-mail
1. Select the header of the e-mail you want to reply
1. Select an e-mail header, then press
the carousel options.
2. Select Add to names and press
,
to access
to, press
select Reply and press
,to access the options menu, then
,. Then select:
,
.
•<new> to create a new name, enter first and last
name then add the associated e-mail address,
or
•a name in the list and press
e-mail address to this name card. If it already
contains an e-mail address, you will be
2. The address of the sender, which you can modify
(see “To one or several recipients” page 55), is
automatically added to the Addressees list. Select
Validate list and press
3. A new screen appears, that contains the subject of
,to add the
,.
the received e-mail preceded with Re: standing for
prompted to press
Delete e-mails
1. Select the e-mail to be deleted and press
,to replace it.
«Reply». Press
,.
4. Enter the text of your mail, then press
,
to
,to
send it: select Send now and press
your reply.
,to send
access the options.
2. Select Delete, and press
,to confirm and
Forward an e-mail
mark the e-mail to be deleted. A small icon allows
you to spot the header(s) of the list corresponding
to the e-mail(s) to be deleted.
In order to forward an e-mail to another recipient, you
must first have downloaded it (see “Download e-mails”
Messages
59
Download from Www.Somanuals.com. All Manuals Search And Download.
page 57). From the Forward to option, proceed as de-
scribed above in “Reply to an e-mail”.
or delete it. You can enter up to 15 different types in
the list. To obtain the codes corresponding to the dif-
ferent types, contact your operator.
In both cases (reply to an e-mail or forward it), your
phone will disconnect from the server when reaching
the network inactivity time out set in the Auto discon-
nection menu (see “Bearer” page 53). It will reconnect
to this server when sending the e-mail.
District codes
Allows you to select the type of messages
you would like to be permanently dis-
played on the idle screen. As a result, for
District Code
this special treatment of the message, you must enter
the type in both the District code and the To pic s menu.
Broadcast Message
Instant message
The Broadcast SMS feature is network-dependent.
Allows you to set the Instant message feature On or Off
When On, any short message (SMS) you receive is au-
tomatically displayed in idle mode.
.
You can Activate or Deactivate the recep-
tion of SMS broadcast regularly trans-
mitted to all subscribers on the network.
Broadcast SMS
Scroll down to read it, and quickly reply by pressing
Reception
,
twice: first to enter the edition screen, then to
send your message. The phone will automatically go
Allows you to set the reception of cell
broadcast messages On or Off. When On
you must define one or several topics as
,
back to the idle screen.
Reception
If you receive a second SMS while you are reading one,
described below.
press
cto exit the first one or reply to it. The mobile
To p ic s
phone will then display the second message.
Allows you to define the type of messag-
es you want to receive. To define a new
type, select <New>, enter the code pro-
Topics
vided by the operator, and, if desired, associate a name.
If you select an existing type in the list, you can change
60
Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
4. If you wish to send your message to this person
only, select Validate list and press
If you want to send it to several people, select
Insert name, press to access the phonebook
again and to add new names to the mailing list
(up to 20 names).
5. Add as many recipients as required, then select
MMS
,
.
Your mobile phone allows you to send
and receive MMS (multimedia messag-
es), featuring texts, pictures and sounds,
,
MMS
including music mixes you have created with BeDJ or
memos that you have recorded.
A multimedia message can be made of one slide (in-
cluding text, sound and image), or of several: in this
case, the message is played in a slide show, whether you
send it to an e-mail address or to another mobile
phone.
Validate list and press
,.
You can select one of the items and press
the e-mail address or phone number, or to Remove it
from the list.
,
to Edit
Design your message
1. On the left hand side of the screen, 5 icons allow
Create an MMS
Select the addressees
you to add a Picture, add Text , add a Sound
the message or access the Options menu. Move
,
Send
1. Press
2. Select New MMS and press
mwhile in idle mode.
,
.
+
or
,
-
to go to the previous or next icon.
to access the Picture Album list, select a
3. Select a name in the list and press
,to add it
2. Press
to your mailing list, OR
Select <New> and enter the phone number or
e-mail address you wish to send your message to.
picture and press
,to add it to your MMS.
The first window of your message is displayed,
showing the selected picture, which is resized if
needed, in order to fit the screen.
Then press
,.
You must have selected the phonebook «In phone» to
access an e-mail address. See “Phonebook” page 29 for
information on phonebook selection.
Although the picture preview when creating the MMS
is (W)105 x (H)55 pixels, the max. size of a picture you
can send is (W)640 x (H)640 pixels, and the max. size
of an MMS (sent or received) is 50 KB.
Messages
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Access the options
The following options are available:
Warning! The bigger the picture size, the longer it will
take to send it. A copyright-protected picture cannot be
sent. Select None if you don’t want to insert any
picture.
,.
Add slide
To create a new slide and add it to
your slide show.
3. The Text icon is automatically selected: press
,
to access the text editing screen, enter the
You can also press
page of the message you are currently
designing is selected.
>when the last
text of your message (see “Text or number entry”
page 18 for help).
4. The Sound icon is then selected: press
access the Sound Album list, select a sound and
press to add it to your MMS.
,to
Once you have created several pages,
move
<or >to browse slides.
,
Delete slide
Next slide
To delete the selected page.
Sounds can be one of the files available in the Album,
or a sound memo that you record when creating the
MMS: in this case, select <Records>, then <New> and
follow the procedure that appears on the screen.You
cannot attach an existing voice memo.
The icon of the item you have added (picture or sound)
changes colour to indicate its insertion.
This option is only available if there is
more than one slide in the message.
To move to the next or to the previous
Previous slide slide.
Slide duration To change the value of slide duration
that you have set in Settings
tion settings (see page 67), and to set a
delay between each slide.
>
Applica-
5. Press
,to send your message, or move -
to access the options.
If you quit the MMS menu and haven’t finished writ-
ing your message, it will be automatically saved in the
Draft menu (see below).
62
Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
Send your Message
As described above, you can either:
Save MMS
as draft
To save your message as a draft, that
you can edit, complete and send later
on. MMS saved as drafts are stored in
•
Send your message as soon as it is completed:
select Send MMS and press
,
.
MMS
>
Drafts (see “Manage folders”
•
Save it as a Draft to complete it and send it later:
page 65).
to send, select the message in Drafts, select Send
Messages saved as drafts must feature a
subject.
MMS and press
MMS is removed from the drafts list.
,. Once it has been sent, the
If the sending of a draft message fails, the message will
be moved to the Outbox menu, and identified as Not
sent.
Save as
template
To save your message as a template,
that you can use as a basis for other
MMS (e.g., «Happy birthday» type of
message). MMS saved as templates are
•
Select it from the Outbox menu and send it: select
listed in MMS
>
Templates (see “Man-
the message to be sent from this menu, select Re-
age folders” below).
send MMS and press
,. Once it has been sent,
the MMS is identified as a sent message in the
list.
In the two last cases, select the message to be sent in the
Preview MMS To preview the slide show you have
created from the first to the last slide,
including sounds & pictures.
relevant folder. In all cases, select Send MMS and press
Add subject
To edit and change or enter the sub-
ject of your message.
,
: a progress bar allows you to follow the sending
of your message. Press
cto cancel the sending of
your message.
When browsing the lists, specific icons show the type of
the selected message (read MMS, delivery report, tem-
plate, etc.). The information about the message (sender,
recipients, subject) scrolls horizontally automatically
when selected.
Receive an MMS
Download and play an MMS
When you receive an MMS, an alert message appears
on the screen to inform you.
Messages
63
Download from Www.Somanuals.com. All Manuals Search And Download.
1. If you activated the Automatic retrieval mode (see
page 66), the message is automatically down-
loaded and placed in the Inbox. Select it in the
•
If the sender of the message has asked for a Read
report, a prompt will ask you to press to
to refuse the sending of
,
send it or to press
the report.
c
Inbox list and press
2. If the Manual mode is activated:
•Press to go back to idle mode and to save
the notification in the Inbox OR
•Press to display the details of the notifica-
tion, then select Download and press to
>to play it.
3. Once the MMS is downloaded, select it in the
Inbox list and press to play it.
c
>
,
Pressing or will switch the player mode from
automatic to manual. In manual mode, press or
to display the previous or the next slide.
Get and store attachments
When playing an MMS as described in the previous
section, press to access the following Player op-
tions
<>
,
<
,
>
download the message itself. As for sending, a
progress bar allows you to follow the download
of the message.
,
A notification isn’t the MMS itself, but an information
window gathering the details about the sender’s identi-
ty, date and time of reception, subject, etc. DO NOT
DELETE NOTIFICATIONS BEFORE YOU HAVE
RETRIEVED THE MESSAGE, or you will never be
able to do so.
:
Play message
To switch back to automatic mode:
the MMS is then played as a contin-
uous slide show.
Next (or
To move to the next or previous
In both automatic and manual modes, a message will
inform you if the size of the MMS you wish to down-
load is bigger than the memory available in your
phone. In this case, you must free memory by deleting
data (picture, sounds, etc.). See “Memory Status”
page 72.
Previous) slide slide. You can also press
<or
>
when viewing the MMS in
manual mode.
This item is not available when you
have selected the last (or first) slide.
64
Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
Rewind
To rewind the MMS back to the first
slide.
Outbox
Lists the messages you have Sent or created
but Not sent yet (e.g., if you have can-
celled the sending procedure by pressing
Detach picture To detach the picture of the current
slide and save it in the Picture album
the
ckey).
.
- You can Open Delete or view the
,
Detach sound To detach the sound of the current
slide and save it in the Sound album
Details of all these messages.
- In addition, an MMS not yet sent can
also be Re-sent to someone, and you can
Forward an MMS already sent.
.
Manage folders
The MMS menu allows you to manage your messages
in 4 different folders. The default (active) folder is the
last one you selected. To change the active folder, press
Templates Lists all messages saved as templates after
their creation.
You can Play Edit and Delete templates.
,
c
to return to the main MMS menu and select the
folder of your choice:
Drafts
Lists all messages saved as drafts after their
creation, or automatically saved if you
quit the MMS menu before saving or
sending your message.
Inbox
Lists all the Notifications
,
Delivery and
Read reports Read and Unread MMS
,
.
- You can Read or Delete notifications
You can Play Edit, Send and Delete drafts.
,
and reports.
- You can Play Forward or Reply to an
,
Messages you have saved can only be sent from the Draft
or Outbox folders. You can NOT recover an item
(whether message, notification or report) that you have
MMS, display its Details or Delete it.
Notifications are automatically deleted
once you have received the full MMS. Do
NOT delete notifications before you have
retrieved the MMS, or you will never be
able to do so.
deleted. Press
cto cancel deletion.
Settings
Your phone may have been pre-configured to directly
access the services offered. If not, you must have received
Messages
65
Download from Www.Somanuals.com. All Manuals Search And Download.
MMS Centre
from your operator the information items described in
the present section and enter them as given.
With some operators, access parameters can be set «over
Allows you to enter or change the MMS address of the
server your phone will connect to.
Gateway address
the air». Please check directly by your operator.
Allows you to enter or change the IP address of the
server’s gateway.
Gateway port
Allows you to enter or change the Port number of the
server’s gateway.
Network account
Allows you to choose a data profile from the ones you
have set (see “Access settings” page 44 for complete in-
formation on how to configure or modify a data pro-
file). This profile and the parameters it features will
then be used for connection.
You must have the information relating to the three
points above, supplied by your operator, and must enter
them exactly as given.
Bearer
This menu allows you to select the type of network
used when launching a connection.
Application settings
Retrieval mode
GSM
Your mobile will only use the GSM
network for connections.
Automatic Any new MMS you receive is automatical-
GPRS
Your mobile will only use the GPRS
network for connections.
(default
mode)
ly downloaded from the server and placed
in the Inbox, without you having to launch
a connection. Select the message you have
GPRS first
Your mobile will first try to connect
to the GPRS network, then to the
GSM network if the GPRS network
isn’t available when connecting.
received in the Inbox and press
>.
This mode is deactivated when roaming.
If selecting GPRS first, you must have configured both
the GSM and GPRS settings (see “Access settings”
page 44).
66
Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
Read report
Manual
Messages are stored on the MMS server,
and you must connect manually to re-
trieve them:
This option can be set On or Off and informs you (via
an SMS) when the status the MMS you have sent has
changed, i.e., whether it was read or deleted without
being read.
1. Press
,to access the Inbox.
2. Select the notification item corre-
sponding to this message and press
Auto save
,
.
This option can be set On or Off and allows you to au-
tomatically save of the messages sent from the Outbox
menu. Messages saved will then appear in the Outbox
folder.
3. Select Read and press
4. When the Details of the message are
displayed, press to launch the
,.
,
connection and download it.
Validity period
5. Once the message is in your phone,
Allows you to select the length of time your message is
to be stored on the server, from 1 hour to 1 week (max-
imum). This is useful when the recipient is not con-
nected to the network (and thus cannot receive your
message immediately).
press
press
,, select Play message and
,
.
Delivery report
This option can be set On or Off and informs you (via
an SMS) whether your MMS was received or rejected.
The delivery report will display the sender’s identity,
date and time of receipt, MMS subject and status of de-
livery.
Slide duration
Allows you to select the duration between each slide in-
cluded in your MMS, from 1 sec. to 60 secs
.
Messages
67
Download from Www.Somanuals.com. All Manuals Search And Download.
of 50 cm away from each other (see diagram). Also
make sure that nothing obstructs the IrDA beam.
10 • Infrared
Your mobile phone integrates the infrared technology
(also called IrDA), that allows you to send or receive
data to and from other IrDA-compliant devices
through a wireless link (e.g., another mobile phone, a
PC or PDA, a printer etc.). Instead of sending a mes-
sage, you can decide to use IrDA to quickly send a
sound you just mixed to a friend’s mobile phone, or to
receive pictures from their PDA.
Files that are copyright-protected cannot be sent. When
connecting with a PC, make sure you have activated its
infrared option.
Send data
Position of devices
Select an item
To send data via IrDA from your mobile phone, you
must first select the item to be sent: for each category,
a sub-menu then gives you access to the Send option;
Before sending or receiving data to and from another
device, they must be correctly positioned in relation to
your mobile phone. Make sure that the respective
IrDA ports are facing each other and are a maximum
press
,
to send the selected data to the other device.
68
Infrared
Download from Www.Somanuals.com. All Manuals Search And Download.
Receive data
Data you
can send
Where to find it
in the phone menus
Activate IrDA
Pictures (BMP, Multimedia
GIF, JPEG)
Sounds (MIDI Multimedia
>
Picture album
To receive data, press
Infrared Receive and press
mobile phone is then ready to receive an
,
and select
,. Your
>
Infrared
>
Sound album
item and waits for the other IrDA device to send it. As
when sending, messages are displayed on the screen
and allow you to follow up the process.
files & ringers) (or live from BeDJ when mixing music,
see “Music & Mix” page 25).
Names
Phonebook
(or press
Games & Appli
>
-
View names list
when in idle mode).
Organiser Events
Receiving is cancelled in the following cases:
- the phone isn’t contacted by another device and the
time out is reached before data is received,
- the infrared link is broken,
Events
>
>
Send the selected item
As soon as your phone finds another IrDA-compliant
device to communicate with, the sending automatical-
ly takes place. Messages are displayed on the screen, for
you to follow the process.
- the size of the file sent is too large for your phone to
manage it,
- you press the
ckey to cancel the process.
If the phone finds several IrDA devices, a list is dis-
played on the screen, for you to choose from. Press
Save the data received
Several options are available when receiving data from
another IrDA device:
,
to confirm and to send the selected data.
Sending is cancelled in the following cases:
- the phone cannot find another device and the time out
is reached before any data is sent,
Press
Cancels the process: if you confirm your choice by
pressing , the phone goes back to idle and the data
you have received isn’t saved.
c
,
- the infrared link is broken,
- you press the
ckey to cancel the process.
Infrared
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Press
,
Use the phone as a modem
You can also use your mobile phone to-
Gives you access to the options menu, from which the
following options are available:
gether with a PC or a PDA, e.g. to surf
the Internet or send faxes.
Data
Save
Saves the data in the appropriate menu
Name cards in the Phonebook Event
cards in the Organiser, etc.), then goes
back to idle.
In the case of a Name card, a <New>
screen will be opened, for you to save
this new record.
To fully benefit from the services available via IrDA
(send and receive SMS, e-mail and fax, upload pictures
and MIDI sounds in your phone, phonebook synchro-
nization, GPRS Wizard, etc.), you must install Mobile
Phone Tools on your PC. This software application is
available on the CD-Rom shipped with your phone.
(
,
The files default names are used, and
you can freely rename each of them via
the appropriate menu (i.e. in Multimedia
The software supplied on the CD-Rom is not compati-
ble with Apple® Macintosh® computers. It only sup-
ports Windows® 98 SE, ME, 2000 and XP.
>
Sounds when you have saved a ringer
Specific software modules for Lotus Notes, Lotus Or-
ganizer and Microsoft Outlook are designed to allow
synchronisation from your Philips mobile phone to
these applications: refer to their respective user guides
for detailed information concerning installation and
configuration.
you would like to rename).
Displays the details of the data you have
Show
received: press
screen.
cto go back one
You must save the data to modify it.
If you have received a Picture, it will be
displayed in full screen.
If you have received a Sound, it will be
played once. Press cor ,to stop
playing it, or move the side keys up or
down to change the volume.
70
Infrared
Download from Www.Somanuals.com. All Manuals Search And Download.
Send by
Infrared
To send the selected picture via infra-
red to another IrDA device (see “In-
frared” page 68 for details).
11 • Multimedia
Picture album
Send by Email To send the selected picture via
E-mail (see “E-Mail” page 52 for de-
tails).
JPEG pictures must have the correct size and format
for your mobile phone to store and display them cor-
rectly. Please check “Get and store attachments”
page 58 for complete information on this subject.
Set as
wallpaper
To set the selected picture as
Wallpaper (this option must be set On
in Settings
>
Display, see page 38).
This menu allows you to manage and
display the pictures stored in your mo-
bile phone.
Pictures in the Standard Pictures folder cannot be delet-
ed. New pictures are stored in Own Pictures. If there
isn’t enough space to store a new picture, you must de-
lete some other pictures to release memory.
Picture Album
When entering one of the available sub-menus, the
pictures stored in your phone are displayed as a text
list. To access the graphical display, select a picture in
Sound album
the list and press
to the next or previous picture, or
the text list. Press
>
. Then press
+
or
-
to go
<
to go back to
This menu allows you to manage and lis-
ten to the sounds stored in your mobile
phone. When entering one of the availa-
,
to access the following options:
Sound Album
Rename
To Rename it: press
name and press
,, enter a
again.
,
ble sub-menus, the sounds are displayed as a text list.
Press +or -to go to the next or previous sound
and wait for a few seconds for the sound to be played.
Delete
To Delete the selected picture.
Send by MMS To send the selected picture via MMS
(see “MMS” page 61 for details).
Multimedia
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Select a sound and press
options:
,to access the following
Demo mode
Press
,to launch the Demo movie.
Rename
To Rename it: press
name and press
,, enter a
,
again.
Demo mode
Delete
To Delete the selected sound.
If you turned the phone on without having inserted a
SIM card, this menu is available in the first menu level.
Send by MMS To send the selected sound via MMS
(see “MMS” page 61 for details).
Memory Status
Send by
Infrared
To send the selected sound via infra-
red to another IrDA device (see “In-
frared” page 68 for details).
This menu allows you to display the per-
centage of memory available in your
phone. Several features share the mobile
Memory status
Send by Email To send the selected sound via E-mail
capacity: pictures and sound album, recorded memos
and voice tags for voice commands, messages you have
stored in the phone, phonebook and organiser entries,
games, etc.
(see “E-Mail” page 52 for details).
Set as ringer To set the selected sound as the cur-
rent Ringer
.
Set as
SMS / MMS
ringer
To set the selected sound as Messages
ringer (this option must be set On in
Your mobile phone is supplied with many sounds and
pictures. You can only delete sounds or pictures in the
Own Pictures or Own Melodies folders, e.g., to free
memory space for your own sounds and pictures.
Settings
>
Sounds, see page 36).
You will not be able to send sounds that are protected
by a copyright. Sounds in the Standard melodies folder
cannot be deleted.
Press
shows you the percentage of memory free and the
phone’s total memory in KB. Press again and ac-
,to check the memory status. The display
,
cess the detailed list of memory used by each feature.
72
Multimedia
Download from Www.Somanuals.com. All Manuals Search And Download.
If «List full» appears when saving a new item or to free
memory space, you must delete an item to be able to cre-
ate or add a new one.
Memos can then be used as alarm or incoming call
ringers, etc. Voice memos previously saved cannot be
sent by MMS.
Sound recording
BeDJ
This menu allows you to record a sound
of 1 min. maximum, and up to 20 differ-
ent sounds, depending on the Memory
This menu allows you to launch BeDJ:
press
,(see “Music & Mix” page 25
Sound recording
BeDJ
for details).
status.
Camera
Press
then press
sound. Follow the instructions on the screen and press
once your sound is recorded. You can then Delete
,
and select Multimedia
>
Sound recording,
,
again. Select <New> to record a new
This menu allows you to activate the
camera: press (see “Taking pic-
tures” page 20 for details).
,
Camera
,
or Rename it.
Multimedia
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Enter the figures using the keypad. Calculator accuracy
is to 2 decimal places and is rounded up to the higher
12 • Games & Appli.
decimal figure. Press
Press and hold
twice to return to idle mode.
c
to correct the numbers.
to get the dot. Press and hold
Euro converter
0
c
The -> Euro menu enables you to convert
Alarm clock
a sum into Euros by entering the amount
-> Euro
and pressing
,.
This menu allows you to set the alarm
clock. Press and select Games &
Appli Alarm clock, then press or
to activate it. Enter the time, then press and
select:
The <- Euro menu enables you to convert
,
Alarm clock
a sum from Euros by entering the
>
+
,
Euro ->
amount and pressing
,.
-
The currency used for the conversion is determined by
the country where you have subscribed. The Euro con-
verter is available upon subscription and only in coun-
tries using the Euro.
-
Once activates the alarm at a set hour on a set day,
Every day activates the alarm at a set hour every day
of the week,
On weekdays activates the alarm at a set hour on
weekdays only.
-
-
Calculator
Then select one of the alarm alerts: the buzzer, a melo-
dy or a sound recording (the latter being played only
once). Select an item in the list if required, and press
This menu provides the following func-
tions:
Calculator
,
to confirm your choice.
Addition
Subtraction
Multiplication By pressing the
Division
Equals
By pressing the
By pressing the
*
*
*
*
#
key.
The alarm clock will ring even if you turned off your
phone, and even if the Ringer volume is set to Off (see
page 36). Press any key to stop the alarm ringing.
key twice.
key 3 times.
key 4 times.
key.
By pressing the
By pressing the
74
Games & Appli.
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Move
<or >to set the Repeat Event
Organiser
option for this event and press
6. The events will be listed using start time and date.
,
.
Create a new event
From the events list,
-press and hold
-repeat steps 2 to 5 to create more events.
The Events menu allows to create events
and store them in your organiser. Events
can be Meetings Holidays or To Do s
cto go back to the idle screen,
Organiser
,
.
When the organiser alert is On (see page 37), a beep
alerts you when an event is due.
The organiser shares the mobile capacity and memory
with other features (phonebook, picture album, sound,
etc.). As a consequence, all features are inter-depend-
ent: the more events you create, the less names, memos
or pictures you can store, and vice-versa. 299 is the
maximum total of events + names you can store.
1. Select Organiser
>
Events
>
<New> and press
,
.
2. Select the type of event to create (Holiday
ToDo) and press
3. Enter the starting and ending date & time of the
event and press , enter the text concerning
the event (e.g. «Meeting with Smith») and press
,
Meeting,
,
.
If «List full» appears, delete an event (or name) to be
able to create a new one. To check the memory availa-
,
ble in your phone, press
Memory status
,and select Multimedia >
,
.
.
4. The Set Reminder menu reminds you of events via
alerts triggered at the chosen time. Move or
, set the Reminder for this event and press
Modify an event
Change an event
<
>
,
.
When creating an event, not all fields are
available, this is designed so make creat-
ing a new event quicker. When changing
This menu only applies to Meeting and ToDo events.
Note that the reminder depends on the time set and dis-
played on the screen. As such, it will be updated when
changing time zones (see “Time and date” page 46).
Change
an event, these further options become available.
1. To change an event, select the event of your
choice and press
,.
Games & Appli.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
2. When your phone displays the details of the
selected event, press , select Change and press
again.
Deleting past events
You can also delete past events by select-
,
,
ing Delete past at the first level of the Or-
ganiser menu. In this case, enter the
Delete past
Changing a repeated event will also modify all instanc-
es of this event: in this case, press to confirm.
starting date (past or future) from which all previous
,
events will be deleted and press
events preceding this date.
,twice to delete all
3. Change any information as needed and as
described above.
Deleting an event
To delete all events set in your organiser, enter a start-
ing date several years ahead (e.g., 3st of December,
2010). This way, you make sure all events preceding
this date are deleted at once.
Deleting a single event
Select the event of your choice and press
,twice.
Then select Delete and press
,to confirm.
Views of events
Deleting a repeated event
The Day view Week view and Month viewdisplay in the
,
•
By selecting a past occurrence: select a past occur-
respective format all events stored in your organiser.
To display events in these views, proceed as follows:
rences of an event and press
,
. When the
, then select
event details appear, press
,
1. Select the view of your choice and press
2. Once you entered the selected view, move
or
or month.
3. Press
events or to create a new one.
,
.
Delete and press
,to confirm: only the past
<
occurrences of the selected event are deleted.
>
to display the previous or next day, week
•
By selecting a future occurrence: select a future
occurrence of an event and press
event details appear, press
Delete and press to confirm: all occurrences
of the selected event are deleted.
,
. When the
, then select
,
to display the list of corresponding
,
,
Time zone
Although changing time zones is neces-
sary when travelling a lot, be aware that
it will impact all organiser reminders: the
Time zone
76
Games & Appli.
Download from Www.Somanuals.com. All Manuals Search And Download.
event alarms will be updated depending on the time
displayed on the screen (see “Time and date” page 46).
When you have destroyed the last brick, you access the
next level. Keys used are the following:
Brick Game
4
*
and
and
6
#
To move the racket left or right.
To throw the ball left or right. Press ei-
ther of these keys to start the game.
To pause the game; pause time is lim-
ited to 2 min. after which the screen
returns to idle mode and the game is
lost.
This menu can be subscription dependent. As such its
icon and content may vary.
0
This menu gives you access to the brick
game. The object of the game is to de-
stroy the bricks by hitting them with the
Brick Game
ball.
Games & Appli.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Conditional
13 • Call information
This option allows you to choose in which circum-
stance(s) you want to divert incoming calls. Three op-
tions are available: If no reply (you haven’t replied to the
call), If not reachable (your network isn’t available) or If
busy (you are already on the phone and your subscrip-
tion doesn’t include the call waiting option or you ha-
ven’t activated it). Each option can be set
independently.
Once you have selected either Conditional or Uncondi-
tional, choose whether you want to divert calls to your
voice mailbox or to another phone number, or cancel
the call forward.
Call settings
This menu allows you to set all the call
options (call forward, waiting, etc.).
Call settings
Call forward
Allows you to divert incoming calls ei-
ther to your mailbox or to a number
(whether in your Phonebook or not) and
Call forward
applies to: Data calls Voice calls and Fax calls.
,
Status
Before activating this option, you must enter your voice
mailboxes’ numbers (see “Mailboxes” page 78). This
feature is subscription dependent, and different from
the call transfer, which takes place when one/several
calls are in progress.
Allows you to display the status of all call
forwarding.
Status
Mailboxes
This menu allows you to enter your
voice mailbox numbers (if not available
on your SIM card).
Unconditional
The unconditional option will divert all the incoming
calls.
Mailboxes
In some cases, you might have to enter two numbers:
one to listen to your mailbox, the other one to forward
calls. Contact your operator for more information on
this subject.
Warning! When selecting this option, you will not re-
ceive any calls at all until you deactivate it.
78
Call information
Download from Www.Somanuals.com. All Manuals Search And Download.
When this option is active, you hear a beep if someone
tries to call you while already on a call. Select the Status
option to find out whether the GSM call waiting is ac-
tive or not.
Auto redial
Allows you to set the auto redial On or
Off. When On and if the person you are
calling is busy, your phone automatically
Autoredial
redials this number until a successful connection is
made, or until the maximum number of attempts is
reached (10). The phone emits one beep at the begin-
ning of each attempt and one special beep if the con-
nection is successful.
This function is subscription-dependent. Contact your
operator.
With GPRS call
Allows you to Activate or Deactivate the
call waiting for voice incoming calls
while a GPRS connection in ongoing.
The time between redials increases with each attempt.
With GPRS call
Caller ID
Any key answer
Allows you to Show or Hide your identity
to your correspondent. The Status op-
tion will inform you if this function is
Allows you to accept a call by pressing
any key, except
), used to reject a call.
Caller ID
Any key answer
activated or not.
Call waiting
Call list
Call waiting is managed differently de-
pending on the type of network (GSM
or GPRS) you have selected.
This menu provides you with the list of
outgoing and incoming calls, as well as
attempts at auto redialling and call de-
Call waiting
With GSM call
Allows you to Activate or Deactivate the
call waiting and applies to: All calls Voice
calls Fax calls and Data calls
Call List
tails. The calls (made, missed and received) are dis-
played in chronological order with the most recent on
top of the list. When the Call list is empty the screen
,
With GSM call
,
.
displays List empty
.
Call information
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Call list
Call counters
From the main carousel, press
select Call Info Call list Call list to dis-
play the call list. Use and ar-
again to consult
the date, time, number, call status of any selected call
and to know if it was sent or received. Press for
access to a carousel which allows you to Call or Call
handsfree this correspondent, Send a SMS Delete the se-
,then
This menu allows you to handle the cost
and duration of your calls.
>
>
+
Call list
-
Call counters
rows to scroll the list and press
,
GSM counters
This menu gives you access to the op-
tions described below.
,
GSM counters
,
lected call or Store the associated number.
The GSM Call Counters do not include WAP connec-
tions. Most options mentioned below are subscription-
dependent.
Reset
Press
Reset. Press
,
, select Call Info
>
Call list, then
,
twice to reset.
Reset
Total duration
Select this option and press
or Reset the time duration of Outgoing or
Incoming calls.
,to Show
The phone stores the last 30 numbers in the Call list, the
most recent number being displayed first. You can re-
dial directly any of these numbers. In idle screen,
Total duration
Last call information
move
in your Phonebook, the corresponding name is dis-
played. Move or to select the number to redial
. Press to hang up.
+to access the Call list. If a number listed is also
This feature is subscription dependent.
+
-
This menu allows you to display the du-
ration and/or cost of your last call.
and press
()
Last call info
Info at call end
This feature is subscription dependent.
80
Call information
Download from Www.Somanuals.com. All Manuals Search And Download.
Allows you to activate or deactivate the
systematic display of the length and/or
cost of each call when hanging up.
Allows you to set or change the rate
per unit. First enter the currency used
(three characters maximum) then en-
ter the cost per unit.
Info at call end
Charge rate
To ta l c os t
This feature is subscription dependent.
GPRS counters
Allows you to display the accumulated
This feature is subscription and network dependent.
cost and to set the counter to zero. It may
be protected by PIN or PIN2 codes.
Shows how much has been spent, hav-
ing established the charge rate.
Allows you to reset the current Total
cost to 0; requires your PIN2 code.
Total cost
This menu allows you to select either
one of the following options:
GPRS counters
Show
Reset
Last mobile session
This option will display the last connec-
tion session or transfer volume of your
mobile phone (e.g., after a WAP connec-
Mobile session
Allows you to check the remaining
credit (compared with previously set
limit).
tion over GPRS).
Last PC session
Show balance
Allows you to cancel the cost limit. It
may be protected by PIN or PIN2
codes (depending on your subscrip-
tion).
Allows you to enter the cost limit used
in the Show balance menu.
This option will display the last connec-
tion session or transfer volume of your
PC transmission.
PC session
Cancel cost limit
The call counters managed by your mobile phone might
differ from the ones used by your operator. You should
therefore consider the call counters displayed on the
screen as informative items, but NOT as the actual
charge rate basis.
Cost limit
Call information
81
Download from Www.Somanuals.com. All Manuals Search And Download.
You can also select Operator Services.
Homepage and press
>
WAP
>
14 • WAP
,
.
Your mobile phone supports services
based on the Wireless Application Proto-
col (WAP). The built-in WAP browser
2. Your mobile phone will connect to the network
and according to the Access settings you have
WAP
defined in the menu Settings
>
Network (see
allows you to access services supplied with your net-
work, such as news, sports, weather, etc.
page 44).
3. The browser is launched and your phone con-
nects to your operator’s homepage.
Your mobile phone readily supports the WAP function
if it is included in your subscription; if your phone was
pre-configured, it shouldn’t be necessary for you to
change the settings described in this section.
4. Move
pages, and press
5. Press to return to the previous page.
+
or
,
-
to navigate the on-line
to select a highlighted item.
c
With some operators, WAP parameters can be set re-
motely. Please check directly with your operator for de-
tailed information.
End a WAP session
To end a WAP session, press and hold
@, OR select
Options
>
Exit and press ,to confirm.
Internet services
Homepage
The Homepage is the link to the first WAP site you will
access when launching WAP from the idle screen. In
most cases, this menu item of the WAP services menu
is preconfigured and will connect directly to your
operator’s WAP homepage.
You can change this default homepage by specifying
the name and URL address of another homepage,
which will then replace the current one (see “Save as
homepage” page 86).
This main menu of the WAP browser allows you to
configure the settings related to WAP, connect to your
operator’s homepage, define bookmarks for direct and
faster connections, etc.
Launch a WAP session
1. To launch a WAP session, press and hold the
@
key while in idle mode.
82
WAP
Download from Www.Somanuals.com. All Manuals Search And Download.
Bookmarks
Enter address
This menu allows you to store your favourite WAP site
addresses, rename them if desired and access them
quickly from the list.
This menu allows you to enter a WAP site address, to
which you can connect directly when selecting it and
pressing
dresses without saving them as bookmarks.
1. Press and enter the URL address of the
desired homepage.
,. This is a quick way to access WAP ad-
This can also be done while browsing: press
@to ac-
,
cess the Options, then select Bookmarks. In this case, the
Name and URL fields will be automatically filled in
with the information contained in the page you are
browsing.
2. Press
,to connect to this page.
All the addresses you enter in this menu and connect to
at least once, will appear in a list: select one of the items
Add bookmarks
and press
,to reconnect to the corresponding page,
1. Select WAP
>
Bookmarks
>
Add bookmark and
without having to enter the complete address again.
press
,
.
2. Start entering the new name: an edit screen auto-
Settings
Edit Homepage
Allows you to change the Homepagename and address:
matically appears.
3. Press
4. Press
,
to save the name you entered.
to move to the address field and pro-
-
1. Press
,and start entering the new name. An
ceed the same way to enter the WAP address.
edit screen automatically appears.
Manage bookmarks
This menu allows you to Delete the stored bookmarks,
or to Edit them in order to change their name and/or
2. Press
,to save the name you entered.
3. Back to the Edit Homepage menu, press
-to
move to the address field and proceed the same
way to change the address.
Select Profile
This menu allows you to select one of the available pro-
files, and to then define the connection settings for
address. In both cases, press
,to confirm.
Use bookmarks
To connect to a WAP site you have stored as a book-
mark, simply select it in the list and press
launch the connection.
,to
each of them: scroll
+
or
-
to choose the profile
WAP
83
Download from Www.Somanuals.com. All Manuals Search And Download.
of your choice, then press
<or >to select /
Proxy address
deselect it and press to confirm.
,
Allows you to specify a proxy gateway address to be
used when launching a WAP connection using the se-
All connection settings described below will apply to the
selected profile, which you can then rename for easier
identification.
lected profile. Press
choice, then press
,and enter the address of your
,
to confirm.
Press and hold
Proxy port
Allows you to specify a proxy port number, in case the
proxy you are using requires a different port number.
0
to enter a dot «.»
Connection
Select connection
Allows you to select one of the data profiles you have
defined in Settings Access settings (see page 44 for de-
tailed information on this subject).
In the list that appears, select the connection setting of
your choice and press
>
Press
press
,
,
and enter the number of your choice, then
to confirm.
,to confirm.
Security
Bearer
Certificates
Allows you to select the type of network used by the se-
lected profile when launching a connection.
Select this menu and press
,to display the list of in-
stalled security certificates. Select one of the items in
the list and press
GSM or GPRS: your mobile will only use the GSM or
the GPRS network for WAP connections.
GPRS first: your mobile will first try to connect to the
GPRS network, then to the GSM network if the GPRS
network isn’t available when connecting.
,to display its details or delete it.
Session info
Allows you to display information about the current
WAP session: security type, class, etc. Press
back one page.
cto go
Selecting this option requires you to have configured
both GSM and GPRS settings. See page 44 for details.
Current certificate
Allows you to display the currently used security certif-
icate. Press
cto go back one page.
84
WAP
Download from Www.Somanuals.com. All Manuals Search And Download.
Rename Profile
This menu allows you to rename the currently selected
profile: enter the new name (an edit screen automati-
cally appears), then press
entered.
Browser Options
This menu allows you to activate/deactivate the down-
loading of images attached to WAP pages. Select Never
or Always and press
Messages with high priority feature an exclamation
mark together with the read / unread icon.
3. Press
the message of your choice, press
4. If the message contains a WAP address (or URL),
+
or
-
to browse the list and select
,to save the name you
,
to read it.
press
site.
,to connect to the corresponding WAP
5. To delete one of the push messages, select Push
Inbox Manage messages and press
,to confirm your choice.
>
,.
Selecting Never will speed up the global downloading
time of the pages browsed.
6. Select the message to be deleted and press
,to
confirm.
Cache
Options
This menu allows you to empty an area of the phone’s
memory where the pages browsed during a WAP ses-
sion are stored. Select Clear cache and press
While browsing Internet pages, press the
,to
access the options described below.
@key to
confirm your choice.
The menus that are common to both Internet services
and Options menus are described in the above section.
Push inbox
This menu allows you to read and manage messages
automatically sent to you by the network and / or by
your operator.
Homepage
Gives you direct access to the Homepage of the WAP
site you are currently browsing.
1. If you have been informed that you received a
push message, press
2. Otherwise, select Operator Services.
Internet services Push Inbox and press
access the list of messages.
,to read it.
Back
>
WAP
,
>
to
Brings you back to the previously browsed page.
>
WAP
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Save as...
You must have browsed at least 2 pages for this option
to be available.
When browsing WAP sites, this menu option allows
you to save images embedded in the pages that are dis-
played.
Forward
1. While browsing, scroll
+
or
-
to select the
Takes you to the next browsed page (e.g., when you
have previously selected Back).
picture.
2. Once the picture is highlighted, press
access the Options. Select Save as... and press
3. Rename the picture if desired and press
save it in the Picture Album
@
to
Refresh
,
.
Will reload the currently browsed page from its origi-
nal server.
,
to
.
Save as homepage
This menu option allows you to save the currently
browsed WAP page as the default homepage.
Exit
Allows you to end a WAP session: press
firm and to quit WAP.
,
to con-
1. Select Save as homepage and press
,. The URL
Receive a call
address of the page you are browsing automati-
When receiving a call whilst connected to WAP:
1. Answering the call will quit the WAP application
and disconnect the current session. Your phone
will return to the last browsed page when you
hang up, but the connection itself will be lost.
2. Rejecting the call will bring you back to the pre-
view screen.
cally appears in the Address field.
2. Enter a name for this homepage and press
3. Back on the Internet services menu, the
,.
homepage name will be the first item on the list.
Press the
automatically to this page.
@key while in idle mode to connect
86
WAP
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Example n° 4
Press *62#, then
feature call forward if unreachable.
15 • Operator services
(
, to activate the
Most items of the Operator Services menu (e.g. Service
numbers, Services +) are subscription-dependent and
specific to operators: your mobile phone readily sup-
ports them if they are included in your subscription.
Consequently, the menus shown following may or may
not be available. Contact your network operator for
detailed information on availability and rates.
Contact your network operator for detailed informa-
tion on GSM strings.
DTMF tones
Some phone services (such as phone answering ma-
chines and pagers) require your phone to transmit
DTMF tones (Dual Tone Multi Frequency), also
known as “touch tones”. These are used to communi-
cate passwords, callback numbers, caller choices, and
so on.
The services provided may involve making a phone call
or sending a SMS for which you may be charged.
GSM strings
You can send DTMF tones at any time during a call by
pressing any of the keys 0to 9, *and #.
You can also attach a DTMF sequence to a phone
number before dialling it (or storing it in the Phone-
book). The phone number and the DTMF part must
be separated by a wait character.
The phone supports standard GSM strings that can be
sent from the keypad to the network and used to acti-
vate services provided by the network.
•
Example n° 1
Press *43#, then
Call Waiting service.
(, to activate the
Pause and wait characters
To obtain a pause or wait character, press and hold
•
Example n° 2
Press *#31#, then
if the mobile identification has been sent.
Example n° 3
(
, to know
#
. The display shows
w
for a wait and for a pause.
p
•
The phone always interprets the first pause character as
a wait character. When you dial a number containing
a wait character, your phone dials the first part (the
Press *61#, then
feature call forward if no reply.
(
, to activate the
Operator services
87
Download from Www.Somanuals.com. All Manuals Search And Download.
phone number) and then waits for the call to be con-
nected before sending the rest of the digits as DTMF
tones. Any subsequent pause character is an ordinary
pause that generates a delay of 2.5 seconds.
number is displayed at the bottom of the screen.
The second number is then dialled.
2. To toggle between the two calls, press
,then
select Switch calls. Each time that you toggle from
one call to another, the active call is placed on
hold and the call which was on hold is activated.
For example: access your answering
machine
3. To hang up the active line, press
). The active
To hear all messages (e.g. code 3) on your answering
machine (password 8421) at phone number
12345678, you could call: 12345678w8421p3.
The phone dials 12345678 and waits for the call to be
connected. When connected, the phone transmits
8421 (the password), pauses 2.5 seconds, and then
sends the last digit. If you find that 2.5 seconds is not
long enough for your needs, you can enter several
pause characters one after the other to increase the
pause time.
line is hung up and the call on hold remains as
such.
4. To end the call on hold, use Switch calls to reach
it, then press
).
Notes:
The second number can be dialled either from the key-
pad or from:
- the phonebook, by pressing
name to be called,
-
, then selecting the
- the Call list, by pressing
number to be called.
+, then selecting the
Make a second call
You can make a second call during an active call or dur-
ing a call on hold. You can switch between the two calls
(the cost displayed on the screen depends on local
charge rate).
Answer a second call
You are able to receive another call when already in
communication (if this feature is available with your
subscription). When you receive a second call the
phone emits an alert beep and the screen displays Call
1. While already on the phone, dial a number then
press
(. The first call is put on hold and the
waiting
.
88
Operator services
Download from Www.Somanuals.com. All Manuals Search And Download.
To receive a second call, you must have:
- subscribed to this feature,
- deactivated the Call forward option for voice calls (see
Answer a third call
Subscription dependent
page 78),
While in communication and one call being on hold,
you may receive a third call. The phone emits an alert
beep. You can either end one of the calls before being
able to answer the third one or introduce the calling
party into a conference (see below). This service is lim-
ited to two current communications (one active and
one on hold).
- activated the Call waiting option (see page 79).
If you receive a second call, press
,
, then you can:
accept the second call: the first one is put on hold,
the second one is active. If you want to toggle
between the two calls, press then select Switch
•
,
calls. Each time you toggle from one call to
another, the active call is put on hold and the call
which was on hold is then activated. To introduce
Conference call
the new caller into a conference press
select Conference.
,and
Subscription dependent
You can activate the conference call by
making consecutive outgoing calls, or
create it from a multiparty call context.
•
•
reject the second call
end the active call, then your incoming call is
ringing.
Conference
You may have up to five members at the same time and
end the conference with
disconnected.
In order to make consecutive outgoing calls, first initi-
ate a normal call with the first number of the confer-
ence. When the first member is on line, initiate a
second call as described in “Make a second call” above.
Notes:
- If you also wish to answer the incoming call, press
; to reject it, press
). At this point all calls are
(
).
- If you have activated call forwarding ‘If Busy’ (see
“Call forward” page 78), you will never receive second
calls since they are always forwarded when the line is
busy.
When the second call is engaged, press
,
and select
Operator services
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Conference. Repeat the above process until five mem-
bers are connected.
If there is an incoming call during the conference call
and there are less than five members, you can accept
ing ,to confirm, or select Private call to have a pri-
vate call with this member only (other members are put
on hold).
Explicit call transfer
this new call by pressing
,. Press ,again and
then select Conference to add this member to the con-
ference call. If there is an incoming call during a con-
ference with five members already connected, you can
answer this new incoming call, but not add it to the
conference.
Subscription dependent
You can connect an active call and a call on hold. You
are disconnected when the transfer is completed. Dur-
ing a call press
,, select Transfer and press ,.
While a conference call is in progress, press
cess the Conf. members options. Disconnect a member
,to ac-
This feature is different from the Call forward, which
takes place before you pick up the call (see page 78).
of the conference by selecting Remove party and press-
90
Operator services
Download from Www.Somanuals.com. All Manuals Search And Download.
Furthermore to prevent unauthorised use of your
phone:
Precautions
Keep your phone in a safe place and keep it
out of small children's reach.
Radio waves
Avoid writing down your PIN code. Try to
remember it instead.
Your cellular mobile phone is a low power ra-
dio transmitter and receiver. When it is op-
erating, it sends and receives radio waves. The
radio waves carry your voice or data signal to
a base station that is connected to the telephone net-
work. The network controls the power at which the
phone transmits.
Switch off the phone and remove the battery if you are
going to leave it unused for a long time.
Use the Security menu to change the PIN code after
purchasing the phone and to activate call restriction
options.
The design of your phone complies with all
applicable laws and regulations. However
your phone may cause interference with oth-
er electronic devices. Consequently you
should follow all local recommendations and regula-
tions when using your cellular phone both at home
and when away. Regulations on the use of cellular
phones in vehicles and aircraft are particularly strin-
gent.
Public concern has been focused for some time on the
possible health risks for users of cellular phones. The
current research on radio wave technology, including
the GSM technology, has been reviewed and safety
standards have been drawn up to ensure protection
from exposure to radio wave energy. Your cellular tele-
•
•
•
•
Your phone transmits/receives radio waves in the
GSM frequency (900 /1800MHz).
The GSM network controls transmission power
(0.01 to 2 watts).
Your phone complies with all relevant safety
standards.
The CE mark on your phone shows compliancy
with European electromagnetic compatibility
(Ref. 89/336/EEC) and low voltage directives
(Ref. 73/23/EEC).
Your cellular mobile phone is your responsibility. To
avoid damage to yourself, to others or to the phone it-
self, read and follow all the safety instructions and
make them known to anyone borrowing your phone.
Precautions
91
Download from Www.Somanuals.com. All Manuals Search And Download.
phone complies with all applicable safety standards
and the Radio Equipment and Telecommunications
Terminal Equipment Directive 1999/5/EC.
In areas where you are requested to turn off radio trans-
mitting devices, such as quarries or other areas where
blasting operations are in progress.
Check with the vehicle manufacturer that
electronic equipment used in your vehicle
will not be affected by radio energy.
Always switch off your phone
Inadequately protected or sensitive electronic equip-
ment may be affected by radio energy. This interfer-
ence can lead to accidents.
Before boarding an aircraft and/or when
packing the phone in your luggage: the use of
mobile phones in an aircraft may be danger-
ous for the operation of the aircraft, disrupt the mobile
phones network and may be illegal.
Users of pacemakers
If you are a user of a pacemaker:
•
Always keep the phone more than 15 cm from
your pacemaker when the phone is switched on,
in order to avoid potential interference.
Do not carry the phone in a breastpocket.
Use the ear opposite to the pacemaker to mini-
mise the potential interference.
In hospitals, clinics, other health care centres
and anywhere else where you may be in the
close vicinity of medical equipment.
•
•
•
Switch off your phone if you suspect that interfer-
ence is taking place.
In areas with a potentially explosive atmos-
phere (e.g. petrol stations and also areas
where the air contains dust particles, such as
metal powders).
Users of hearing aids
If you are a user of a hearing aid, consult your physi-
cian and hearing aid manufacturer to learn whether
your particular device is susceptible to cellular phone
interference.
In a vehicle transporting flammable products (even if
the vehicle is parked) or a vehicle powered by liquefied
petroleum gas (LPG), check first that the vehicle com-
plies with the applicable safety rules.
92
Precautions
Download from Www.Somanuals.com. All Manuals Search And Download.
work. Setting the backlight for a shorter period of
time as well as avoiding unnecessary navigating in
the menus will also help to save the battery’s
energy for longer phoning and stand-by perform-
ances.
Performance improvement
In order to improve the performance of your phone,
reduce radio energy emission, reduce battery con-
sumption and ensure safe operation adhere to the fol-
lowing guidelines:
Information displayed on the battery
For the optimal and satisfactory operation of
the phone you are recommended to use the
phone in the normal operating position
(when not using in hands-free mode or with
a hands-free accessory).
•
Your phone is powered by a rechargeable battery.
Use specified charger only.
Do not incinerate.
•
•
•
•
Do not deform or open the battery.
•
•
•
Do not expose your phone to extreme tempera-
tures.
Do not allow metal objects (such as keys in your
pocket) to short circuit the battery contacts.
Avoid exposure to excessive heat (>60°C or
140°F), moisture or caustic environments.
You should only use Philips Authentic Acces-
sories, as the use of any other accessories may
damage your phone and will make all guaran-
tees for your Philips phone null and void.
Treat the phone with care. Any misuse will void
the International Guarantee.
Do not immerse the phone in any liquid; if your
phone is damp, switch it off, remove the battery
and let them dry for 24hrs before using them
again.
•
•
•
To clean the phone, wipe it with a soft cloth.
Placing and receiving calls consumes the same
amount of battery energy. However, the mobile
consumes less energy in idle screen when kept in
the same place. When in idle screen and while
you are moving, your phone consumes energy to
transmit updated location information to the net-
Make sure damaged parts are replaced immediately by
a qualified technician and that they are replaced with
genuine Philips replacement parts.
Precautions
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not use your phone while driving
Environmental care
It lowers concentration, which can be danger-
ous. Adhere to the following guidelines:
Give your full attention to driving. Pull off
the road and park before using the phone.
Remember to observe the local regulations re-
garding the disposal of your packaging mate-
rials, exhausted batteries and old phone and
please promote their recycling.
Respect the local regulations in countries where you
drive and use your GSM phone.
Philips has marked the battery and packaging with
standard symbols designed to promote the recycling
and appropriate disposal of your eventual waste.
If you want to use your phone in a vehicle, install the
hands-free car kit which is designed for that purpose,
still ensuring you give full attention to driving.
Ensure that your phone and car kit do not block any
air bags or other security devices fitted in your car.
The use of an alarm system to operate a vehicle's light
or horn to indicate incoming phone calls is prohibited
on public roads in some countries. Check local regula-
tions.
Battery:
The crossed-out dustbin signifies that
the battery should not be disposed of
with general household waste.
Packaging: The mobius loop symbol signifies the la-
belled packaging material is recyclable.
The green point symbol signifies that a
financial contribution has been made to
the associated national packaging recov-
ery and recycling system (e.g. EcoEm-
ballage in France).
The chasing arrows symbol on the plas-
tic tray and plastic bag indicate that the
materials are recyclable and also identi-
fies the plastic material.
EN 60950 Norm
In case of hot weather or after a prolonged exposure to
the sun (e.g., behind a window or a windscreen), the
temperature of your phone's casing might increase, es-
pecially when featuring a metallic finish. Be very care-
ful in this case when picking up your phone and also
avoid using it with an ambient temperature over 40°C.
94
Precautions
Download from Www.Somanuals.com. All Manuals Search And Download.
The display doesn't
respond (or the dis-
play responds slow-
ly) to key presses
The display responds more
slowly at very low tempera-
tures. This is normal and does
not affect the operation of the
phone. Take the phone to a
warmer place and try again.
In other cases please contact
your phone supplier.
Troubleshooting
The phone does not
Remove and reinstall the bat-
tery (see page 7). Then charge
the phone until the battery
icon has stopped flashing. Fi-
nally, unplug from the charg-
er and try to switch the
mobile on.
switch on
Your phone doesn’t
return to the idle
screen
Press and hold c, or
switch off the phone, check
that the SIM card and the bat-
tery are installed correctly,
and switch it on again.
The display shows
BLOCKED when
you switch on
Somebody tried to use your
phone but didn’t know the
PIN code nor the unblocking
code (PUK). Contact your
service provider.
Your phone doesn’t
display the phone
numbersofincoming
calls
This feature is network and
subscription dependent. If the
network doesn’t send the call-
er’s number, the phone will
display Call 1 instead. Contact
your operator for detailed in-
formation on this subject.
The
and
The network connection is
lost. Either you are in a radio
shadow (in a tunnel or be-
tween tall buildings) or you
are outside the network cover-
age area. Try from another
place or contact your network
operator for assistance/infor-
mation about the network.
symbols are not dis-
played
You can’t send text
messages
Some networks don’t allow
message exchanges with other
networks. Contact your oper-
ator for detailed information
on this subject.
Troubleshooting
95
Download from Www.Somanuals.com. All Manuals Search And Download.
The display shows
IMSI failure
This problem is related to
your subscription. Contact
your operator.
Youare notsure that
you are receiving
calls properly
To receive all calls, make sure
that none of the features
«Conditional call forward» or
«unconditional call forward»
is activated (see page 78).
You can’t receive
and/or store JPEG
pictures
A picture may not be accepted
by your mobile phone if it is
too large, or if it doesn’t have
the correct file format. See
page 58 for complete infor-
mation on this subject.
When attempting to
use a feature in the
menu, the mobile
Some features are network de-
pendent. They are only avail-
able, therefore, if the network
or your subscription supports
them. Contact your operator
for detailed information on
this subject.
displays not allowed
When charging the
battery the battery
icon shows no bars
and the outline is
flashing
Only charge the battery in an
environment where the tem-
perature does not go below
0°C (32°F) or above 50°C
(113°F).
In other cases please contact
your phone supplier.
The display shows
Insert your SIM card
Check that the SIM card has
been inserted in the right po-
sition (see page 7). If the
problem remains, your SIM
card might be damaged. Con-
tact your operator.
The display shows
SIM failure
Check that the SIM card has
been inserted in the right po-
sition (see page 7). If the
problem remains, your SIM
card may be damaged. Con-
tact your operator.
96
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Your phone doesn’t
work well in your
car
A car contains many metallic
parts that absorb electromag-
netic waves which can affect
the phone’s performances. A
car kit is available to provide
you with an external antenna
and enables you to make and
receive phone calls without
handling the handset.
You should check with local
authorities if you are allowed
to phone while driving.
Troubleshooting
97
Download from Www.Somanuals.com. All Manuals Search And Download.
Roaming - Displayed when your phone is
registered to a network other than your own
(especially when you’re abroad).
Icons & symbols
In idle mode, several symbols can be displayed
simultaneously either on external screen or main
screen.
SMS full - Memory for messages is full. De-
lete old messages to receive new ones.
If the network symbol isn’t displayed, the network is
not currently available. You may be in a bad reception
area: move to a different location.
Call Forward Unconditional to number
-
All your incoming voice calls are being for-
warded to a number other than voice mail.
Silent - Your phone will not ring when
receiving a call.
Call Forward to voice mailbox - All your
calls are being forwarded to voice mail.
Vibra - Your phone will vibrate when
receiving a call.
Home zone - A zone designated by your
network operator. Subscription dependent,
contact your service provider for details.
GPRS attach - Your mobile phone is
connected to the GPRS network.
GSM Network: your phone is connected to
a GSM network
Reception quality: the more bars are shown
SMS message - You have received a new
message.
the better the reception is.
Voice mail - You have received a new voice
mail.
Instant message - option is set to On
.
Memory full - The phone’s memory is full.
Delete items to store new ones.
Battery - The bars indicate the battery level
(4 bars = full, 1 bar = low).
MMS message - You have received a new
multimedia message.
Alarm clock activated.
98
Icons & symbols
Download from Www.Somanuals.com. All Manuals Search And Download.
coming call by pressing the button. In idle mode, press
to activate voice dial.
Philips authentic
accessories
In certain countries, telephoning while driving is pro-
hibited. For safe and trouble free installation, we rec-
ommend that specialized technicians install hands-free
car kits.
Charger
Charges your battery in any AC outlet. Small enough
to carry in a briefcase/handbag.
Carry case
Universal car kit
A translucent and soft plastic carry case allows easy key
presses while protecting your phone from nicks and
scratches. Supplied with necklace.
Designed to operate your Philips mobile phone hands-
free and easy to use, this compact hands-free solution
offers a high audio quality. Simply plug the kit into the
vehicle auxiliary outlet.
To maximise the performance of your Philips phone
and not to void the warranty, always purchase Philips
Authentic Accessories that are specially designed for use
with your phone. Philips Consumer Electronics cannot
be held liable for any damage due to use with non au-
thorised accessories. Ask for Philips Authentic Accesso-
ries where you purchased your Philips Phone.
Stereo headset
In-line answer button offers you a simplified alterna-
tive to searching for the phone. Simply answer an in-
Philips authentic accessories
99
Download from Www.Somanuals.com. All Manuals Search And Download.
The conformity assessment procedure referred to in
Article 10 and detailed in Annex V of Directive 1999/
5/EC has been followed related to articles 3.1 and 3.2
with the involvement of the following Notified Body:
BABT, Claremont House, 34 Molesey Road, Walton-
on-Thames, KT12 4RQ, UK
Declaration of
conformity
We,
Philips France
Mobile Telephony Business Creation Team
Route d’Angers
Identification mark: 0168
72081 Le Mans cedex 9
FRANCE
The technical documentation relevant to the above
equipment will be held at:
declare under our sole responsibility that the product
Philips France
Mobile Telephony Business Creation Team
Route d’Angers
72081 Le Mans cedex 9
FRANCE
Philips 535
CT 5358
Cellular Mobile Radio GSM 900/GSM 1800
TAC: 352751
to which this declaration relates, is in conformity with
the following Standards:
Le Mans, 13, November 2003
Jean-Omer Kifouani
Quality Manager
EN 60950, EN 50360 and EN 301 489-07
EN 301 511 v 7.0.1
We hereby declare that all essential radio test suites
have been carried out and that the above named prod-
uct is in conformity to all the essential requirements of
Directive 1999/5/EC.
In case your Philips product is not working correctly or
is defective, please return your phone to the place of
purchase or the Philips National Service Center. In the
event you require service whilst in another country a
dealer address can be given to you by the Philips
Consumer Help Desk in that country.
Download from Www.Somanuals.com. All Manuals Search And Download.
|