Colour Televison
32PW8521
Operating Instructions
8521/Eng/69R/79R p1-5
1
5/6/03, 3:17 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INFORMATION AND USEFULT IPS
Safety Information
•
Disconnect mains plug when :
–
–
–
the red light below the TV screen is flashing continuously.
a bright white line is displayed across the screen.
cleaning the TV screen. Never use abrasive cleaning agents. Use a slight damp chamois
leather or soft cloth.
–
–
there is a lightning storm.
the set is left unattended for a prolonged period of time.
•
No naked flame sources, such as lighted candles, should be placed on top of the TV or
in the vicinity.
•
•
•
Do not place your TV set under direct sunlight or heat.
Leave at least 5 cm around each side of TV set to allow for proper ventilation.
Avoid placing your set (e.g. near the window) where it is likely to be exposed to rain
or water.
•
No objects filled with liquids should be placed on top the TV so as to avoid dripping
or splashing of liquids on the set.
UsefulTips
•
•
•
Do not leave your set on standby mode for a prolonged period of time. Switch off set
to allow it to be demagnetised. A demagnetised set supports good picture quality.
Do not shift or move the set around when it is switched on. Uneveness in colour in
some parts of the screen may occur.
Never attempt to repair a defective TV yourself. Always consult a skilled service
personnel.
Recycling Directive – To minimise harm to the environment, the batteries
supplied with the TV set do not contain mercury or nickel cadmium. If possible,
when disposing of batteries, use recycling means available to you. Your TV set
uses materials which are reusable or which can be recycled. To minimise the
amount of waste in the environment, specialist companies recover used sets for
dismantling and collection of reusable materials (contact your dealer).
3
8521/Eng/69R/79R p1-5
3
4/30/03, 7:59 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE CALLING SERVICE
Below is a list of frequently occurred symptoms. Before you call for service, make these simple
checks. Some of these symptoms can easily be rectified if you know what to do.
Symptom
What you should do
Colour patch
(uneveness)
• Switch off theTV by the mains power button.Wait for 20
minutes before switching on again.
• Check theTV is not placed too near speakers or magnetic
objects.
No power
No picture
• Check theTV’s AC power cord is plugged into the mains
socket. If there is still no power, disconnect plug.Wait for
60 seconds and re-insert plug. Switch on theTV again.
• Check the antenna connection at the rear of theTV.
• PossibleTV station problem.Try another channel.
Good picture
but no sound
• Try increasing the volume.
• Check that the sound is not muted. If it is muted, press the
Mute button on the remote control to restore sound.
Good sound but poor
colour or no picture
• Try increasing the contrast and brightness setting.
• Check antenna connection at the rear of theTV.
Snowish picture and
noise
Horizontal dotted lines
• Possible electrical interference e.g. hairdryer, vacuum
cleaner, etc. Switch off appliances.
Double images or
“Ghost” images
• Possible poor positioning of antenna. Using a highly
directional antenna may improve reception.
TV not responding to
remote control handset
• Check life span of batteries of remote control handset.
• Aim remote control handset directly at remote control
sensor lens on theTV.
4
8521/Eng/69R/79R p1-5
4
4/30/03, 7:59 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
HOOKING UPY OUR TV (BASIC CONNECTION)
Antenna Connection
• Connect the aerial plug to the antenna socket ¬
on the backcover.
• Insert the mains plug into the wall socket.
Mains Connection
• For correct mains voltage, refer to type sticker at
the rear of the TV set
• Consult your dealer if mains supply is different.
Note : This diagram is not representative of the
actual plug and socket.
Switching on the Set
• Press the main power button to switch on/
off the TV.
• If the set is on standby (indicator is red),
press the Power button on the remote
control to switch on set.
USE/CARE OF REMOTE CONTROL
• Insert the correct type of batteries into the
compartment.
• Ensure the batteries are placed in the right
direction.
5
8521/Eng/69R/79R p1-5
5
4/30/03, 7:59 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING THE AUDIO/VIDEO SOCKETS (PLAYBACK)
AV sockets
Monitor out
VIDEO
AV1 in
AV2 in
on rear of
TV
Y
L/Mono
AUDIO
R
S-VIDEO
Pb
Pr
COMPONENT VIDEO INPUT
OUT
OUT
OUT
Back of
VCR
ANTENNA
VIDEO
IN
L
R
AUDIO
IN
IN
VCR (Equipped with
Video and Audio Output
sockets
You can view the playback of VCR tapes (Video Disc players, camcorders, etc.) by using the AUDIO and
VIDEO INPUT sockets on the rear of the TV.
– Connect the VIDEO and AUDIO IN sockets on the rear of the TV to the AUDIO and
VIDEO OUT sockets on the VCR.
Monitor out
VIDEO
AV1 in
AV2 in
AV sockets
on rear of
TV
Y
L/Mono
AUDIO
R
S-VIDEO
Pb
Pr
COMPONENT VIDEO INPUT
OUT
OUT
VIDEO
IN
OUT
OUT
L
Back of S-VHS VCR
R
AUDIO
IN
S-VIDEO
ANTENNA
IN
The S-Video connection on the rear of the TV is used for the playback of S-VHS VCR tapes, Video Discs,
Video Games or Compact Disc-Interactive (cd-i) discs. Better picture detail and clarity is
possible with the S-Video playback as compared to the picture from a normal antenna (RF)
connection.
– Connect the S-VIDEO socket on the rear of the TV to the S-VHS OUT socket on a
S-VHS VCR.
– Connect the AUDIO IN sockets from the rear of the TV to the AUDIO OUT sockets
on the VCR.
Note : You need not connect the VIDEO IN socket of the TV if S-VIDEO IN socket is
connected.
6
8521/Eng/69R/79R p6-8
6
4/23/03, 2:54 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING THE AUDIO/VIDEO SOCKETS (PLAYBACK)
Connect headphone jack to
socket for personal listening
Camcorder
For more convenient direct playback connections, the Side Audio/Video Input sockets allow for quick
and easy connections, particularly Camcorder tape recordings.
– Connect the S-VIDEO socket (if available) from the Camcorder to the Side S-VIDEO
socket of the TV. You need not connect the Side VIDEO IN socket of the TV if the
S-VIDEO socket is connected.
– Connect the AUDIO OUT sockets (Right and Left) from the Camcorder to the Side
AUDIO IN sockets.
Monitor out
VIDEO
AV1 in
AV2 in
AV sockets
on rear of
TV
Y
L/Mono
AUDIO
R
S-VIDEO
Pb
Pr
COMPONENT VIDEO INPUT
OUT
Pb
OUT
Back of DVD
Y
Pr
L
R
AUDIO
DVD (Equipped with “Y”,
“Pb” and “Pr” and Output
sockets)
You can view the playback of DVD discs by using the COMPONENT VIDEO INPUT sockets on the
rear of the TV.
– Connect the “Y”, “Pb” and “Pr” INPUT sockets on the TV to the “Y”, “Pb” and
“Pr” OUTPUT sockets on the DVD to view playback of DVD discs.
Note : “Y”, “Pb”, “Pr” sockets and AV1 sockets cannot be connected simultaneously.
7
8521/Eng/69R/79R p6-8
7
5/20/03, 3:57 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING THE AUDIO/VIDEO SOCKETS (RECORDING)
Connection for recording from the TV channel
Monitor out
VIDEO
AV1 in
AV2 in
AV sockets
on rear of
TV
Y
L/Mono
AUDIO
R
S-VIDEO
Pb
Pr
COMPONENT VIDEO INPUT
OUT
OUT
OUT
ANTENNA
VIDEO
IN
L
R
AUDIO
IN
IN
VCR (Equipped with Video
and Audio Input sockets
– Connect the corresponding INPUT sockets of the VCR to the MONITOR OUTPUT
sockets on the rear of the TV.
– To enhance the sound of your TV, connect the AUDIO L and R sockets to an external
audio system instead of the VCR. For mono equipment, connect only the AUDIO L socket.
Connection for recording from one VCR to another VCR
Monitor out
VIDEO
AV1 in
AV2 in
AV sockets on
rear of TV
Y
L/Mono
AUDIO
R
S-VIDEO
Pb
OUT
ANTENNA
IN
OUT
OUT
Back of
VCR
Pr
VIDEO
L
R
AUDIO
COMPONENT VIDEO INPUT
OUT
OUT
OUT
ANTENNA
VIDEO
IN
L
R
AUDIO
IN
IN
VCR (Equipped with
Video and Audio
Output sockets
VCR 2
VCR (Equipped with Video
and Audio Input sockets
VCR 1
– Connect the sockets of the VCR which you wish to record from, to the corresponding
sockets at either AV1 or AV2..
– Connect the sockets of the receiving VCR to the MONITOR OUTPUT sockets on the
rear of the TV.
8
8521/Eng/69R/79R p6-8
8
4/23/03, 2:54 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS OF REMOTE CONTROL
& Power button
–
Switch set off temporarily to standby mode.
(The red light indicator lights up when the set
is on standby mode).
To switch on set from standby mode, press
Channel +/– , Digit (0 -9) or Power button.
&
é
–
“
‘
(
§
è
!
ç
é Teletext Colour buttons
–
In teletext mode, the colour buttons allow you to
access directly an item or corresponding pages.
“ Teletext buttons
Allows you to access teletext information. For
detailed description of functions, refer to section
on “Using the Teletext”
‘ Smiley button
0
Not applicable.
( Timer Button
1
2
Allows you to set the clock to switch to another
channel at a specified time while you are watching
another channel or when the set is on standby mode.
§ Smart Sound Button
Press the Smart Sound button repeatedly to
access 4 different types of sound settings and
choose your desired setting.
è Menu Button
Displays the main menu. Also exits menu from screen.
! Cursor Up Button
Allows you to select the next item on the menu.
ç Cursor Left Button
Allows you to select the sub-menus and adjust the settings.
0 Volume + / – Button
Increases or decreases volume.
1 4
Allows you to switch from Stereo to Mono sound during
stereo transmission or to choose between language5or
language6during dual sound transmission.
2 A/CH(Alternate channel) Button
Allows you to change between the current
channel and the previous channel.
9
8521/Eng/69R/79R/p9-11
9
7/2/03, 2:59 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS OF REMOTE CONTROL
3 Main Index Button
Not applicable.
4 Frownie button
Not applicable.
5 Smart Picture Button
Press the Smart Picture button repeatedly to
access 5 different types of picture settings and
choose your desired setting.
3
4
5
6
61Incredible Surround Button
–
Allows you to select Incredible Surround sound
when transmission is in stereo mode.
Allows you to select Spatial Sound when transmission
is in mono mode.
–
7
71Cursor Right Button
8
9
Allows you to access the sub-menus and adjust
the settings.
20
21
22
8 Cursor Down Button
Allows you to select the next item on the menu.
9 Channel + / – Buttons
Allows you to select channels in ascending or
descending order.
20 Mute Button
23
Mutes sound. To restore sound, press button again.
21 Teletext Button
Refer to section on “Using the Teletext”
22 OSD button
24
25
Allows you to display the current channel number.
It also allows to exit menu from the screen after
control adjustments.
23 Digit (0 -9) Buttons
Press to select a channel. For a 2-digit channel
number, press the first digit and followed
immediately by the second digit.
24 A/V Button
Allows you to select the AV channels.
25 Sleeptimer Button
Allows you to select a time period after which the
setwill switch to standby mode automatically.
10
8521/Eng/69R/79R/p9-11
10
7/2/03, 2:59 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS OF TVCONTROLS
(
+
CH
–
‘
§
M
–
+
‘
(
3
“
é
&
&
é
“
Mains Power button
Switch mains power on or off.
Standby Light indicator Indicate red light when standby mode is activated.
Remote Sensor
Acts as a sensor for activating the controls of the
TV when remote control handset is aimed at it.
‘
(
§
Volume + / – button
Channel + / – button
Adjust sound volume louder/softer.
Select channel in ascending/descending order.
Menu button
Press the MENU button to enter main menu.
Press the Channel + or – button to select the
next item on the menu. Press the Volume + or
– button to access the sub-menus and adjust the
settings.
11
8521/Eng/69R/79R p9-11
11
4/23/03, 2:54 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING THE MENU LANGUAGE AND
AUTOMATIC TUNING OF CHANNELS
Operating instructions generally explains the operation of theTV set using
the buttons on the remote control unless otherwise stated. Please read the
following instructions carefully and follow the steps as shown to familiarise
yourself with the installations and all features available in your set.
Before you tune in the channels by the AUTO STORE method, select the menu language of
your choice. The LANGUAGE feature allows you to set the TV’s on-screen menu to be
shown in your desired language.
Step
Press button
Result on screen
Enter main menu.
MENU
É
•PICTURE
BRIGHTNESS
COLOUR
CONTRAST
SHARPNESS
COLOUR TEMP
M
•SOUND
•FEATURES
•INSTALL
•PICTURE
•SOUND
LANGUAGE
Press button repeatedly until
INSTALL is selected.
¸
AUTO STORE
MANUAL STORE
SORT
•FEATURES
L
É
•INSTALL
CHANNEL EDIT
L
Enter INSTALL menu.
INSTALL
Ñ
˙
Ñ LANGUAGE
•
ENGLISH
É
•AUTO STORE
B.MELAYU
L
É
•MANUAL STORE
•SORT
•CHANNEL EDIT
M
12
8521/Eng/69R/79R p12-16
12
4/23/03, 2:55 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING THE MENU LANGUAGE AND
AUTOMATIC TUNING OF CHANNELS
Result on screen
Step
Press button
INSTALL
Enter LANGUAGE mode.
˙
É
Ñ
LANGUAGE
•
ENGLISH
B.MELAYU
•
•
•
•
AUTO STORE
MANUAL STORE
SORT
˚
Select desired language.
Exit from language mode.
CHANNEL EDIT
or
¸
L
INSTALL
Ñ LANGUAGE
•
ENGLISH
B.MELAYU
É
Ñ
˝
¸
˙
•AUTO STORE
L
É
•MANUAL STORE
•SORT
•CHANNEL EDIT
M
INSTALL
L
•
Ñ LANGUAGE
Select AUTO STORE.
Ñ
É
•
AUTO STORE
SEARCH
•MANUAL STORE
•SORT
•CHANNEL EDIT
M
INSTALL
L
Ñ
•LANGUAGE
Start automatic tuning.
É
•AUTO STORE •SEARCHING
•MANUAL STORE
•SORT
PLEASE WAIT
CHAN.FOUND 8
•CHANNEL EDIT
048.31 MHZ
M
INSTALL
L
Ñ LANGUAGE
When tuning is completed,
exit menu from screen.
•
m
9
Ñ
É
•
AUTO STORE
SEARCH
•MANUAL STORE
•SORT
•CHANNEL EDIT
M
13
8521/Eng/69R/79R p12-16
13
4/23/03, 2:55 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
MANUAL TUNING OF CHANNELS
Manual tuning allows you to store each programme manually.
Result on screen
Step
Press button
MENU
Enter main menu.
•PICTURE
•SOUND
LANGUAGE
AUTO STORE
MANUAL STORE
SORT
Press button repeatedly until
INSTALL is selected.
•FEATURES
¸
L
É
•INSTALL
CHANNEL EDIT
Enter INSTALL menu.
˙
INSTALL
• LANGUAGE
COLOUR SYSTEM
SOUND SYSTEM
• AUTO STORE
Press button repeatedly until
MANUAL STORE is selected.
L
¸
• MANUAL STORE SEARCH
M
• SORT
CHANNEL
• CHANNEL EDIT STORE
•
INSTALL
MANUAL STORE
Enter MANUAL STORE menu.
˙
L
•COLOUR SYSTEM
•SOUND SYSTEM
Select SEARCH.
¸
Ñ
É
•
SEARCH
048.31MHZ
•CHANNEL
•STORE
INSTALL
Start manual tuning of channel.
Searching stops once a transmitting
channel is found.
˙
MANUAL STORE
•COLOUR SYSTEM
•SOUND SYSTEM
L
Ñ
É
•
SEARCH
196.25MHZ
•CHANNEL
•STORE
L
¸
Select CHANNEL.
INSTALL
MANUAL STORE
•COLOUR SYSTEM
Key in the desired channel number.
•SOUND SYSTEM •MANUAL
•SEARCH
9
Ñ
É
•
CHANNEL
18
•STORE
Select STORE.
INSTALL
10
11
¸
MANUAL STORE
•COLOUR SYSTEM
•SOUND SYSTEM
•SEARCH
L
Store tuned channel. Note : If you
want to continue searching for
another transmitting channel, repeat
steps 7 to 11.
˙
•CHANNEL
É
Ñ
STORE
• STORED
INSTALL
MANUAL STORE
•COLOUR SYSTEM
•SOUND SYSTEM
L
Ñ
É
SEARCH
•
196.25MHZ
•CHANNEL
•STORE
12
m
Exit menu from screen.
M
14
8521/Eng/69R/79R p12-16
14
4/23/03, 2:55 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING THE COLOUR /SOUND SYSTEM
This feature allows you to select your desired COLOUR and SOUND system. If AUTO
is selected, the respective colour and sound system will be automatically selected according
to the transmission system.
Note : Select your desired colour and sound system manually if reception is poor at AUTO
mode.
Result on screen
Step
Press button
Repeat step 1 to step 5 as in “MANUAL TUNING OF CHANNELS”
COLOUR SYSTEM is selected.
Enter COLOUR SYSTEM mode.
˙
INSTALL
MANUAL STORE
É
L
Ñ
COLOUR SYSTEM •
AUTO
˚
or
•SOUND SYSTEM
•SEARCH
PAL•
Select the desired colour system.
SECAM
•CHANNEL
•STORE
¸
INSTALL
MANUAL STORE
•COLOUR SYSTEM
Exit from colour system mode.
˝
L
Ñ
SOUND SYSTEM •
AUTO
B/G
D/K
Proceed to select SOUND SYSTEM.
9
•SEARCH
¸
•CHANNEL
•STORE
•
INSTALL
˙
10
11
Enter SOUND SYSTEM mode.
MANUAL STORE
•COLOUR SYSTEM
Ñ
L
SOUND SYSTEM •
•SEARCH
AUTO
B/G
D/K
˚
or
Select the desired sound system.
•CHANNEL
•STORE
¸
M
INSTALL
MANUAL STORE
•COLOUR SYSTEM
•SOUND SYSTEM
•SEARCH
L
12
Exit from sound system mode.
˝
•CHANNEL
Press button repeatedly until
STORE is selected.
¸
É
Ñ
STORE
•
INSTALL
Store selected system.
MANUAL STORE
•COLOUR SYSTEM
•SOUND SYSTEM
•SEARCH
L
˙
•CHANNEL
Ñ
É
STORE
• STORED
INSTALL
MANUAL STORE
•COLOUR SYSTEM
•SOUND SYSTEM
L
Ñ
É
SEARCH
•
196.25MHZ
•CHANNEL
Exit menu from screen.
•STORE
m
M
15
8521/Eng/69R/79R p12-16
15
4/23/03, 2:55 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
FINE TUNING OF CHANNELS
This feature allows you to adjust picture reception in areas of weak reception.
▲
INSTALL
Ñ
Ñ LANGUAGE
•
ENGLISH
B.MELAYU
É
➠
➠
➠
•AUTO STORE
▲
É
•MANUAL STORE
•SORT
•CHANNEL EDIT
▼
▼
1. Enter main menu. 2. Select INSTALL. 3. Enter install menu.
Result on screen
Step
Press button
Press button repeatedly until
MANUAL STORE is selected.
INSTALL
¸
• LANGUAGE
COLOUR SYSTEM
SOUND SYSTEM
• AUTO STORE
▲
• MANUAL STORE SEARCH
▼
• SORT
CHANNEL
• CHANNEL EDIT STORE
•
Enter MANUAL STORE menu.
INSTALL
MANUAL STORE
˙
▲
É
Ñ
COLOUR SYSTEM •
AUTO
PAL
SECAM
•SOUND SYSTEM
•SEARCH
•CHANNEL
•STORE
▼
Press button repeatedly until
FINE TUNE is selected.
¸
INSTALL
MANUAL STORE
•SOUND SYSTEM
•SEARCH
▲
Start fine-tuning until desired
picture and sound is obtained.
˝
or
•CHANNEL
•STORE
Ñ
É
FINE TUNE
˙
▼
INSTALL
MANUAL STORE
•COLOUR SYSTEM
•SOUND SYSTEM
•SEARCH
▲
˚
Select STORE.
•CHANNEL
Store last fine-tuned status.
9
˙
É
Ñ
STORE
• STORED
▼
INSTALL
MANUAL STORE
•COLOUR SYSTEM
•SOUND SYSTEM
▲
Ñ
É
SEARCH
•
196.25MHZ
•CHANNEL
•STORE
▼
10
Exit menu from screen.
m
16
8521/Eng/69R/79R p12-16
16
6/9/03, 11:53 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
SORTING OF CHANNELS
This feature allows you to change the channel number to your choice for a particular TV
station.
L
INSTALL
Ñ
Ñ LANGUAGE
•
ENGLISH
B.MELAYU
É
➠
➠
➠
•AUTO STORE
L
É
•MANUAL STORE
•SORT
•CHANNEL EDIT
M
M
1. Enter main menu. 2. Select INSTALL. 3. Enter install mode.
Result on screen
Step
Press button
Press button repeatedly until
SORT is selected.
¸
INSTALL
•
LANGUAGE
FROM
TO
EXCHANGE
•
AUTO STORE
MANUAL STORE
SORT
•
L
É
•
M
•
CHANNEL EDIT
Enter SORT menu.
˙
INSTALL
L
SORT
Ñ
É
Key in the channel number in the
FROM column, that is, the channel
you want to swap from.
FROM
•
8
•TO
•EXCHANGE
M
INSTALL
SORT
Select TO .
¸
L
•FROM
8
Key in the channel number in the
TO column. that is, the channel
you want to swap to.
É
Ñ
TO
•
6
•
EXCHANGE
M
INSTALL
SORT
L
Select EXCHANGE.
9
¸
•FROM
•TO
É
Ñ
EXCHANGE
•
EXCHANGED
Activate exchange of channels.
10
˙
M
INSTALL
SORT
L
•FROM
•TO
É
Ñ
EXCHANGE
•
11
m
Exit menu from screen.
M
17
8521/Eng/69R/79R/p17-20
17
4/23/03, 2:56 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING OF CHANNELS
This feature allows you to edit or skip channels which have bad or weak TV signal or channels
that you do not watch often.
Note : Once a channel is skipped, you cannot have access to it by the CHANNEL + or –
button. You can only access the channel by the DIGIT (0 -9) button.
▲
INSTALL
Ñ
Ñ LANGUAGE
•
ENGLISH
B.MELAYU
É
➠
➠
➠
•AUTO STORE
▲
É
•MANUAL STORE
•SORT
•CHANNEL EDIT
▼
▼
1. Enter main menu. 2. Select INSTALL. 3. Enter install mode.
Result on screen
Step
Press button
Press button repeatedly until
CHANNEL EDIT is selected.
¸
INSTALL
▲
•LANGUAGE
•AUTO STORE
•MANUAL STORE
•SORT
3
4
5
6
7
Ñ
É
CHANNEL EDIT
•
▼
Enter channel edit mode.
˙
INSTALL
▲
•LANGUAGE
•AUTO STORE
•MANUAL STORE
•SORT
3
4
5
6
7
˚
Select the channel you want to skip.
or
¸
É
Ñ
CHANNEL EDIT
•
▼
INSTALL
▲
Activate skipped mode.
Exit menu from screen.
˙
m
•LANGUAGE
•AUTO STORE
•MANUAL STORE
•SORT
3
4
5
6
É
Ñ
CHANNEL EDIT
•
7 SKIPPED
▼
How to add back channels
• Repeat steps 1 to 5 as in “Editing of Channels”.
˚
¸
• Select the channel you want to add back by the
(CURSOR UP) or
(CURSOR
DOWN) button.
• Press the
(CURSOR RIGHT) button to activate adding back of channel.
˙
m
• Exit menu from screen by the
(OSD) button.
18
8521/Eng/69R/79R/p17-20
18
6/16/03, 4:16 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
NAMING OF CHANNELS
This feature allows a selection of 10 channels of pre-defined names. It also allows you to enter
a new name or modify an existing name of a channel for 40 channels including external
channels.
▲
INSTALL
Ñ
➠
➠
É
➠
Ñ LANGUAGE
•
ENGLISH
B.MELAYU
•AUTO STORE
▲
É
•MANUAL STORE
•SORT
•CHANNEL EDIT
▼
▼
1. Enter main menu. 2. Select INSTALL. 3. Enter install mode.
Result on screen
Step
Press button
Press button repeatedly until
NAME is highlighted.
¸
▲
INSTALL
▲
• AUTO STORE
• MANUAL STORE
• SORT
• CHANNEL EDIT
Ñ
É
NAME
•
PERSONAL
Enter NAME mode.
˙
INSTALL
▲
•AUTO STORE
•MANUAL STORE
•SORT
Select desired preset name and press
˚
˙
(CURSOR RIGHT) button
•CHANNEL EDIT
or
¸
É
to store selected pre-set name.
Ñ
NAME
•
PERSONAL
▼
INSTALL
▲
If you select PERSONAL, move
to first character slot
•AUTO STORE
•MANUAL STORE
•SORT
˙
•CHANNEL EDIT
É
Ñ
NAME
•
–
Press button repeatedly to cycle
through the characters and select
desired character.
˚
INSTALL
▲
or
¸
•AUTO STORE
•MANUAL STORE
•SORT
Move to next character slot by the
•CHANNEL EDIT
˙
(CURSOR RIGHT) button
É
NAME
•
LUCKY
Ñ
and select in the next character.
(You can enter up to a maximum
of 5 characters)
INSTALL
▲
▲
•AUTO STORE
•MANUAL STORE
•SORT
Store named channel.
MENU
9
•CHANNEL EDIT
Ñ
É
NAME
•
PERSONAL
m
10
Exit menu from screen.
19
8521/Eng/69R/79R/p17-20
19
6/16/03, 4:16 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE PICTURE/SOUND MENU
The picture and sound menus allow you to make adjustments to the picture and sound. It also
allow you to select and activate other features in the menu.
1. Press the MENU button to enter main menu.
2. Use the CURSOR UP/DOWN buttons to select the items on the PICTURE/SOUND
menu.
3. Use the CURSOR LEFT/RIGHT buttons to access the sub-menus.
Picture
menu items
Activities
PICTURE
▲
É
Ñ
BRIGHTNESS
38
• COLOUR
Brightness
Colour
Increase or decrease brightness level.
Increase or decrease color level.
• CONTRAST
• SHARPNESS
PICTURE
Contrast
Increase or decrease contrast leveluntil
lightest parts of the picture show good
detail.
▲
▲
• CONTRAST
• SHARPNESS
• COLOUR TEMP
Sharpness
Increase or decrease sharpness level to
improve detail in the picture.
• DIGITAL OPTIONS
Ñ
É
•
DYN. CONTRAST
MIN
Colour Temp
Allows you a choice of 3 picture settings
(NORMAL, WARM and COOL).
Note
* Digital Options Allows you to choose from Auto, Digital
Scan, Progressive Scan and 100Hz options.
HUE feature is only
applicable to NTSC
Dynamic
Contrast
Allows you a choice of 4 settings (Minimum,
Medium, Maximum and Off) to boost the
contrast level especially in dark scene so as
to make the picture more noticeable.
programmes. The HUE
item will not appear on the
menu if programme is in
PAL mode.
* Digital Options
– Digital Scan option improves background flickering.
– Progressive Scan option reduces line flickering resulting in sharper picture.
– 100Hz option is most appropriate for still pictures.
Note : Progressive Scan option is only available in NTSC transmission.
Sound
menu items
Activities
SOUND
▲
É
Ñ
TREBLE
38
Treble
Bass
Increase or decrease the high frequency level.
Increase or decrease the low frequency level.
• BASS
• BALANCE
• AVL
Balance
Adjusts the balance of the right and left
speakers’ sound output.
AVL
As variation in signal conditions can result
(Auto Volume a sudden change in volume during in
Leveller)
commercial breaks or channel switching,
selecting the “ON” function will enable the
volume to remain at a standard volume level.
20
8521/Eng/69R/79R/p17-20
20
6/3/03, 5:13 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE ACTIVE CONTROL FEATURE
This feature automatically adjust settings for optimal picture quality continuously under any
signal conditions. To activate the Active Control feature, select the “ON” option in the
Active Control menu.
How to access the Active Control function
MENU
1. Press the
(MENU) button to enter main menu
(CURSOR DOWN) button
•PICTURE
TIMER
and press the
¸
•SOUND
ACTIVE CTRL
CHILD LOCK
FORMAT
L
É
repeatedly until FEATURES is selected.
•FEATURES
M
•INSTALL
ROTATION
2. Press the
(CURSOR RIGHT) button to
˙
FEATURES
L
enter FEATURES menu.
•
TIMER
•
É
Ñ
ACTIVE CTRL
CHILD LOCK
FORMAT
•
OFF
•
•
•
¸
3. Press the
(CURSOR DOWN) button to
ROTATION
select ACTIVE CONTROL.
4. Press the
˙
(CURSOR RIGHT) button
FEATURES
L
repeatedly to select ON option to activate the
Active Control function.
•
TIMER
•
É
Ñ
ACTIVE CTRL
CHILD LOCK
FORMAT
•
ON
•
•
•
ROTATION
5. Press the m (OSD) button to exit menu from screen.
21
8521/Eng/69R/79R/p21-23
21
4/23/03, 2:57 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ACTIVATING THE TIMER
The Timer feature allows you to set the timer to switch to another channel at a specified
time while you are watching another channel or when the TV is on standby mode.
Note : For the timer to function, the set must not be switched off. Once the set is switched
off, the timer is disabled.
Result on screen
Step
Press button
Enter TIMER menu.
FEATURES
TIMER
L
É
Ñ
TIME
• --:--
•
•
•
•
START TIME
STOP TIME
CHANNEL
ACTIVATE
M
M
Enter TIME mode.
˙
FEATURES
TIMER
L
Key in the current time For
example, if the current time
is 12:30, key digit 1 and 2 in the
hour column, followed by digit
3 and 0 in the minute column.
Ñ
É
TIME
•
12:30
M
•
•
•
•
START TIME
STOP TIME
CHANNEL
ACTIVATE
FEATURES
TIMER
L
•
TIME
12:30
--:--
MENU
Exit from TIME mode.
Ñ
É
START TIME
STOP TIME
CHANNEL
ACTIVATE
•
•
•
•
Select START TIME.
¸
M
M
FEATURES
TIMER
L
Enter the START TIME mode.
TIME
START TIME
STOP TIME
CHANNEL
ACTIVATE
˙
Ñ
É
•
•
•
•
•
13:30
M
Key in the time you want the
programme to be switched on.
FEATURES
TIMER
L
•
•
TIME
Exit from START TIME mode.
Select STOP TIME.
MENU
START TIME
STOP TIME
CHANNEL
ACTIVATE
É
•
--:--
•
Ñ
•
M
¸
9
FEATURES
TIMER
Enter STOP TIME mode.
˙
•
TIME
10
11
L
•
START TIME
STOP TIME
CHANNEL
ACTIVATE
Ñ
É
•
15:30
M
Key in the time you want the
programme to be switched off.
•
•
22
8521/Eng/69R/79R/p21-23
22
4/23/03, 2:57 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ACTIVATING THE TIMER
Result on screen
Step
Press button
MENU
Exit from STOP TIME mode.
12
FEATURES
TIMER
▲
• TIME
• START TIMEE
• STOP TIME
Select CHANNEL.
¸
É
Ñ
CHANNEL
•
3
• ACTIVATE
▼
▼
FEATURES
TIMER
Key in the channel you want to
switch to.
▲
• TIME
• START TIMEE
• STOP TIME
É
Ñ
CHANNEL
•
8
• ACTIVATE
▼
▼
FEATURES
TIMER
¸
Select ACTIVATE.
▲
• TIME
• START TIMEE
• STOP TIME
• CHANNEL
Ñ
É
ACTIVATE
•
OFF
▼
▼
FEATURES
TIMER
Activate timer. You can select
to activate timer by DAILY or
ONCE mode.
▲
˙
• TIME
• START TIMEE
• STOP TIME
• CHANNEL
Ñ
É
ACTIVATE
•
ONCE
▼
FEATURES
TIMER
Select DISPLAY.
▲
¸
• START TIME
• STOP TIMEE
• CHANNEL
Select ON mode if you want to
display the current time on the
TV creen.
˙
• ACTIVATE
Ñ
É
DISPLAY
•
ON
Exit menu from screen.
m
9
Note
60 seconds before the timer is activated, a message indicating the time left for the channel
switch will appear on the screen. To disable the channel switch, press any button on the
remote control.
23
8521/Eng/69R/79R/p21-23
23
6/3/03, 5:14 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ACTIVATING THE CHILD LOCK (ACCESS CODE)
The Child Lock feature allows you to lock channels to prevent your children from watching
programmes you deem undesirable.
Note : You cannot have access to the locked channels via the top controls of the TV set.
You can only have access to the locked channels via the remote control. Keep the remote
control out of reach so as to prevent your children from having access to it.
FEATURES
▲
É
•TIMER
TIME
➠
▼
➠
➠
•ACTIVE CTRL
•CHILD LOCK
•FORMAT
START TIME
STOP TIME
CHANNEL
ACTIVATE
•ROTATION
1. Enter main menu. 2. Select FEATURES . 3. Enter FEATURES menu.
Result on screen
Step
Press button
Select CHILD LOCK .
¸
FEATURES
• TIMER
ACCESS CODE
- - - -
• ACTIVE CTRL
▲
É
• CHILD LOCK
▼
• FORMAT
• ROTATION
FEATURES
Enter ACCESS CODE mode.
˙
• TIMER
ACCESS CODE
– – – –
• ACTIVE CTRL
Key in access code 0711
(0711 is the default access code).
A message INCORRECT will
appear.
Ñ
CHILD LOCK
• FORMAT
• ROTATION
FEATURES
Key in 0711 the second time.
When the message CORRECT
appears, the CHILD LOCK
menu is now accessible.
• TIMER
ACCESS CODE
X X X X
CORRECT
• ACTIVE CTRL
Ñ
CHILD LOCK
• FORMAT
• ROTATION
FEATURES
▲
CHILD LOCK
Ñ
É
LOCK CHANNEL •
2
3
4
5
6
You can now proceed to change
the access code of your choice.
•CHANGE CODE
•CLEAR ALL
24
8521/Eng/69R/79R/p24-27
24
6/9/03, 1:24 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ACTIVATING THE CHILD LOCK (CHANGE CODE)
Result on screen
Step
Press button
FEATURES
CHILD LOCK
¸
Select CHANGE CODE.
•LOCK CHANNEL ENTER
Ñ
CHANGE CODE
•CLEAR ALL
NEW CODE
– – – –
Enter CHANGE CODE mode.
9
˙
FEATURES
CHILD LOCK
•LOCK CHANNEL ENTER
Key in the access code of your
choice.
Ñ
CHANGE CODE
•CLEAR ALL
NEW CODE
x x x x
10
FEATURES
CHILD LOCK
Confirm access code.
11
•LOCK CHANNEL CONFIRM
Ñ
CHANGE CODE
•CLEAR ALL
CODE
x x x x
FEATURES
CHILD LOCK
When the new code is confirmed,
the message CORRECT will
appear.
•LOCK CHANNEL CONFIRM
Ñ
CHANGE CODE
•CLEAR ALL
CODE
x x x x
CORRECT
Exit menu from screen.
12
m
Note : After you have exit menu from screen and you want to enter child lock menu again ,
you need to key the new access code only once. If you have forgotten the new access code,
key in 0711 twice to enter the child lock menu. Upon entering the child lock menu, you can
proceed to change code again.
25
8521/Eng/69R/79R/p24-27
25
4/23/03, 2:58 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ACTIVATING THE CHILD LOCK (LOCK CHANNEL)
FEATURES
➠
➠
➠
L
É
•TIMER
TIME
M
•ACTIVE CTRL
•CHILD LOCK
•FORMAT
START TIME
STOP TIME
CHANNEL
ACTIVATE
•ROTATION
1. Enter main menu. 2. Select FEATURES. 3. Enter FEATURES menu.
Result on screen
Step
Press button
Select CHILD LOCK .
¸
FEATURES
•
TIMER
ACCESS CODE
- - - -
• ACTIVE CTRL
L
É
•
CHILD LOCK
FORMAT
M
•
•
ROTATION
˙
˙
Enter ACCESS CODE mode.
FEATURES
TIMER
Key in access code .
•
ACCESS CODE
X X X X
CORRECT
• ACTIVE CTRL
Ñ
CHILD LOCK
•
•
FORMAT
ROTATION
Enter LOCK CHANNEL mode.
FEATURES
CHILD LOCK
É
Ñ
LOCK CHANNEL•
2
3
4
5
6
•CHANGE CODE
•CLEAR ALL
˚
Select the channel you want to
block.
or
¸
FEATURES
Activate blocking of channel. A
keylock symbol will appear beside
the channel number indicating that
it is locked.
CHILD LOCK
LOCK CHANNEL
˙
Ñ
É
•
3F
4
5
6
7
9
•CHANGE CODE
•CLEAR ALL
Exit menu from screen.
m
10
Note : You cannot have access to the locked channels via the top controls of the TV set.
You can only have access to the locked channels via the remote control.
When AV1 source is locked, CV1 source is automatically locked. Like-wise, if CV1 source is
locked, AV1 source is also automatically locked as they share the same audio input.
If you attempt to enter the INSTALL menu after locking a channel, a message
“Enter ACCESS CODE” will appear on the screen. You need to enter the ACCESS CODE
to enable you to enter the INSTALL menu.
26
8521/Eng/69R/79R/p24-27
26
4/23/03, 2:58 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ACTIVATING THE CHILD LOCK (CLEAR ALL)
To unlock channels that you have locked, enter the Child Lock menu and activate the
CLEAR ALL mode.
FEATURES
L
É
➠
•TIMER
TIME
➠
➠
M
•ACTIVE CTRL
•CHILD LOCK
•FORMAT
START TIME
STOP TIME
CHANNEL
ACTIVATE
•
ROTATION
1. Enter main menu. 2. Select FEATURES 3. Enter FEATURES menu.
Result on screen
Step
Press button
Select CHILD LOCK.
FEATURES
¸
•
TIMER
ACCESS CODE
- - - -
• ACTIVE CTRL
L
É
•
CHILD LOCK
FORMAT
M
•
•
ROTATION
˙
Enter ACCESS CODE mode.
FEATURES
TIMER
•
ACCESS CODE
X X X X
CORRECT
• ACTIVE CTRL
Key in access code.
Ñ
CHILD LOCK
•
•
FORMAT
ROTATION
Press button repeatedly until
CLEAR ALL is selected.
FEATURES
CHILD LOCK
¸
L
•LOCK CHANNEL
•CHANGE CODE
Ñ
É
CLEAR ALL
FEATURES
Activate clearing of all locked
channels.
L
˙
m
CHILD LOCK
•LOCK CHANNEL
•CHANGE CODE
Ñ
É
CLEAR ALL
•CLEARED
Exit menu from screen.
9
Note
You can also unlock individual channel by the LOCK CHANNEL menu.
• Repeat step 1 to 7 as in “ACTIVATING THE CHILD LOCK (LOCK CHANNEL)”.
˚
¸
• Select the channel you want to unlock by the
buttons.
or
(CURSOR UP / DOWN)
• Press the
disappear).
(CURSOR RIGHT) button to unlock channel (the keylock symbol will
˙
27
8521/Eng/69R/79R/p24-27
27
4/23/03, 2:58 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE SCREEN FORMAT
Screen Format function allows you a choice of different formats for your viewing pleasure,
namely : - Auto, 4:3, Zoom 14:9, Zoom 16:9, Subtitle Zoom, Superwide and
Widescreen.
Enter the FEATURES menu and select FORMAT by the
FEATURES
L
¸
button. Press the
or
button to cycle through
˝
˙
•
•
•
Ñ
TIMER
ACTIVE CTRL
CHILD LOCK
FORMAT
the various screen formats and select the format of your
choice.
É
•
4:3
•
ROTATION
Definition of Screen Formats
AUTO mode
When AUTO format is selected, it will select the correct screen format provided
the specific signals are transmitted with the programmes.
4:3 Mode
This picture is reproduced in 4:3 format and a black band is
displayed on either side of the picture.
Zoom 14:9 Mode
This picture is enlarged to 14:9 format, a thin black band
˚
¸
remains on both sides of the picture. The
and
buttons allow you to move the image up or down.
Zoom 16:9 Mode
This picture is enlarged to 16:9 format. This mode is
recommended when displaying pictures which have black
˚
bands at the top and bottom (letterbox format). The
¸
and
buttons allow you to move the image up or down.
Subtitle Zoom Mode
This mode is use to display 4:3 pictures using the full surface of
˚
¸
the screen leaving the subtitles visible. The
and
buttons allow you to move the image up or down.
Superwide Mode
This mode is use to display 4:3 pictures using the full surface of the
˚
¸
screen by enlarging the sides of the picture. The
buttons allow you to move the image up or down.
and
Widescreen Mode
This mode restores the correct proportions of pictures transmitted
in 16:9 using full screen display. If you display a 4:3 picture in this mode,
it will be enlarged horizontally.
28
8521/Eng/69R/79R/p28-31
28
5/9/03, 4:12 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE ROTATION FEATURE
Due to the earth’s magnetic field and positoin of the TV set, slight tilting of the picture to the
left or right may occur when the set is switched on. When this phenomenon occurs, select
ROTATION in the FEATURE menu and adjust accordingly by the Cursor Right or Left
button.
How to use the Rotation Feature
MENU
1. Press the
(MENU) button to enter main menu
•
PICTURE
SOUND
FEATURES
INSTALL
TIMER
•
ACTIVE CTRL
CHILD LOCK
FORMAT
¸
and press the
(CURSOR DOWN) button
L
É
•
M
repeatedly until FEATURES is selected.
•
ROTATION
˙
2. Press the
(CURSOR RIGHT) button to
FEATURES
TIMER
enter FEATURES menu.
L
•
¸
3. Press the
(CURSOR DOWN) button
• ACTIVE CTRL
• CHILD LOCK
• FORMAT
repeatedly until ROTATION is selected.
É
Ñ
ROTATION
•
1
˙
4. Press the
(CURSOR RIGHT) button
FEATURES
when picture is tilted to the left. Press button
until you deem picture is in normal position.
If picture is tilted to the right, press the
L
•
TIMER
• ACTIVE CTRL
• CHILD LOCK
• FORMAT
É
˝
Ñ
(CURSOR LEFT) button until you
ROTATION
•
8
deem picture is in normal position.
Picture tilted to the left
After adjustment
➠
PHILIPS
PHILIPS
Picture tilted to the right
After adjustment
➠
PHILIPS
PHILIPS
29
8521/Eng/69R/79R/p28-31
29
4/23/03, 2:59 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE BLUE MUTE FEATURE
Blue Mute feature indicates to you the absence of signalwhen the TV screen turns blue. To
activate the Blue Mute feature, select the “ON” option in the Blue Mute menu.
How to access the Blue Mute function
MENU
1. Press the
(MENU) button to enter main menu
¸
•PICTURE
TIMER
and press the
(CURSOR DOWN) button
•SOUND
ACTIVE CTRL
CHILD LOCK
FORMAT
L
É
repeatedly until FEATURES is selected.
•FEATURES
M
•INSTALL
ROTATION
˙
2. Press the
(CURSOR RIGHT) button to
FEATURES
L
enter FEATURES menu.
•
•
ACTIVE CTRL
CHILD LOCK
FORMAT
ROTATION
BLUE MUTE
•
•
Ñ
¸
3. Press the
(CURSOR DOWN) button
É
•
OFF
repeatedly until BLUE MUTE is selected.
˙
4. Press the
(CURSOR RIGHT) button
FEATURES
L
to select ON option to activate the Blue Mute
function.
•
•
ACTIVE CTRL
CHILD LOCK
FORMAT
ROTATION
BLUE MUTE
•
•
Ñ
É
•
ON
m
5. Press the
(OSD) button to exit menu from screen.
30
8521/Eng/69R/79R/p28-31
30
4/23/03, 2:59 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
SMART PICTURE AND SMART SOUND CONTROL
SMART PICTURE feature offers you a choice of 5 picture settings, namely, RICH,
NATURAL, SOFT, PERSONAL and MULTIMEDIA.
SMART SOUND feature offers you a choice of 4 sound settings, namely, THEATRE,
MUSIC, VOICE and PERSONAL.
Press
(SMART PICTURE) or
(SMART SOUND) button repeatedly to cycle
through the settings to select your desired mode.
Definition of Picture Settings
PERSONAL
: Picture settings are set to your
preference.
PERSONAL
RICH
: Emphasize very vibrant colours.
(Suitable for AV mode in brightly-lit
room)
RICH
NATURAL
SOFT
NATURAL
SOFT
: Emphasize original colours.
: Emphasize “warm” colours.
(Suitable for dimly-lit room condition
and gives cinema-like effect when light
is switched off).
MULTIMEDIA : Emphasize “soft” colours. (Suitable for
playing computer games, surfing, etc.)
MULTIMEDIA
Note : The PERSONAL setting is the setting that you
set up using the Picture menu in the main menu. This
is the only setting in the Smart Picture settings that
can be changed. All the other settings are pre-set at
the factory.
Definition of Sound Settings
PERSONAL : Sound settings are set to your
PERSONAL
preference.
VOICE
MUSIC
VOICE
: Emphasize high tone. (Treble boosted)
: Emphasize low tone. (Bass boosted)
MUSIC
THEATRE
THEATRE
: Emphasize sensation to action.
(Bass and Treble boosted)
31
8521/Eng/69R/79R/p28-31
31
4/23/03, 2:59 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE TELEXTEXT
If a TV channel broadcast contains teletext information, each channel that broadcasts
teletext transmits a page (index page) with information on how to use the teletext system,
usually on page 100. The system transmitted is indicated in the option line at the bottom
of the screen.
Result on screen
Press button
1
On/Off teletext
and
Press the button once to switch on
teletext display. (A channel in which
teletext is being transmitted must be
selected).
Press the button the second time
superimpose the teletext page over
the TV programme.
Press the button the third time
to exit teletext mode.
Superimpose
teletext page
over TV
4
6
5
programme
3
2
Selecting a
teletext page
Key in the required teletext page
(3 digits). The page number is
displayed at the top left hand corner
of the screen. When the teletext
page is located, the counter stops
searching. If the counter keeps
searching, it means that the page is
not available for selection. If you
make a mistake in keying the page
number, you have to complete
keying the 3-digit number before
re-keying the correct page number.
1
2
3
4
Accessing
a teletext
page
Press the CURSOR UP button to
display the next page and the
CURSOR DOWN button to
display the previous page.
Direct Access to The 4-colour buttons allow you to
an item or
corresponding
pages
access directly an item or
corresponding pages.
5
6
Main Index
Enlarge
Not applicable.
Press the button once to enlarge and
view the top half of the page.
Press the button the second time to
enlarge and view the bottom half of
the page. Press the button the third
time to return to normal size page.
32
8521/Eng/69R/79R/p32-35
32
7/2/03, 3:01 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE TELETEXT
Result on screen
Press button
7
8
Hold
Not applicable.
Not applicable.
7
Interrupt
10
8
9
9
Selecting a For a teletext page with sub-pages,
9
sub-page
press the Cursor Left or Right
button to access the previous sub-
page or the next subpage.
9
10 Reveal/
Press the button once to reveal
hidden information (solutions to
puzzles, riddles, etc). Press the
button the second time to conceal
information. This button is applicable
only to teletext page with puzzles,
riddles, etc.)
Conceal
How to select your favourite page
This feature allows you select 4 of your favourite or most commonly viewed page and stored
them in the favourite page selection. You can then access directly your favourite page by the
colour buttons without having to key in the page number.
1. Press the
2. Press the
TELEXTEXT ON/OFF) button to enter teletext mode.
MENU
(MENU) button to enter favourite page selection. Note : The colour
alphabets at the bottom of the screen is now changed to page numbers.
3. Key in your favourite page by the
(DIGIT 0 -9) buttons.
m
4. Press the
(OSD) button to highlight pager numbers.
5. Select the colour button on your remote control you want your favourite page to be stored.
6. Repeat step 3 to 5 to select and store other favourite pages.
33
8521/Eng/69R/79R/p32-35
33
7/2/03, 3:01 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
32PW8521
82 cm
Picture tube screen size
Picture tube visible area
76 cm
Audio Output :
Speaker
Subwoofer
2 x 10 W
10W
TV System
NTSC M
PAL B/G
PAL D/K
PAL I
SECAM B/G
SECAM D/K
SECAM K1
Playback System
NTSC 3.58, NTSC 4.43, PAL 60
Set Dimensions :
Width
Depth
88.6 cm
53.3 cm
57.0 cm
Height
Net Weight of Set (approximate )
54 kg
Note
For Operating Voltage, Frequency, Power Consumption and Version Number, refer to the
type number at the rear of the set.
34
8521/Eng/69R/79Rp32-35
34
5/6/03, 3:19 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
3139 125 31201
8521/Eng/69R/79Rp32-35
35
4/23/03, 3:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
|