Philips Car Stereo System OR2200 User Manual
Always there to help you  
Register your product and get support at  
www.philips.com/welcome  
OR2200  
Question?  
Contact  
Philips  
User manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
1 Safety  
2
8 Listen to an external device  
14  
2 Your clock radio  
Introduction  
3
3
3
4
5
9
Use system menus  
Check the current software version  
Upgrade the software  
15  
15  
15  
15  
What's in the box  
Overview of the product  
Know about the LCD display  
Reset the product  
10 Adjust volume  
16  
17  
18  
19  
3
For the first time use  
Assemble the AC power adaptor  
Connect power  
Power on  
Adjust brightness  
6
6
6
6
6
11 Use the sleep timer  
12 Use the countdown timer  
13 Troubleshooting  
4
5
Set time and date  
7
Use the alarm timer  
Set an alarm  
Deactivate a preset alarm  
Snooze the alarm  
Stop the alarm  
8
8
8
8
8
14 Product information  
General information  
Tuner  
20  
20  
20  
20  
20  
Speakers  
Amplifier  
6 Listen to FM radio stations  
Switch to FM mode  
9
9
9
9
9
9
10  
10  
15 Notice  
21  
21  
21  
21  
Compliance  
Search for a radio station automatically  
Search for a radio station manually  
Store radio stations automatically  
Program radio stations manually  
Display RDS information  
Care of the environment  
Copyright  
Adjust FM settings  
7 Listen to DAB radio stations  
Switch to DAB mode  
11  
11  
11  
11  
11  
12  
12  
For the first time use  
Tune to a stored radio station  
Program radio stations  
Display DAB information  
Use DAB menus  
EN  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Risk of injury or damage to the product!  
1 Safety  
•
This product shall not be exposed to  
dripping or splashing!  
•
Do not place any sources of danger on this  
product (e.g. liquid filled objects, lighted  
candles).  
Never place the product or any objects  
on power cords or on other electrical  
equipment.  
If the product is transported in  
temperatures below 5°C, unpack the  
product and wait until its temperature  
matches room temperature before  
connecting it to the power outlet.  
Read and understand all instructions before you  
use this product. If damage is caused by failure  
to follow the instructions, the warranty does  
not apply.  
•
•
Risk of electric shock or fire!  
•
•
Never remove the casing of the product.  
Never expose the product and accessories  
to rain or water. Never place liquid  
containers, such as vases, near the product.  
If liquids are spilt on or into the product,  
disconnect it from the power outlet  
immediately. Contact the Consumer Care  
to have the product checked before use.  
Never place the product and accessories  
near naked flames or other heat sources,  
including direct sunlight.  
Risk of overheating!  
•
Never install this product in a confined  
space.Always leave a space of at least four  
inches around the product for ventilation.  
Make sure that curtains or other objects  
never cover the ventilation slots on the  
product.  
•
•
•
•
Never insert objects into the ventilation  
slots or other openings on the product.  
Where the mains plug or an appliance  
coupler is used as the disconnect device,  
the disconnect device shall remain readily  
operable.  
Note  
• The rated power voltage is printed on the back of the  
product.The model number and serial number are  
printed on the bottom.  
•
•
Disconnect the product from the power  
outlet before lightning storms.  
When you disconnect the power cord,  
hold the plug securely, never the cable.  
Risk of short circuit or fire!  
•
Use only power supplies listed in the user  
manual  
•
Before you connect the product to the  
power outlet, make sure that the power  
voltage matches the value printed on the  
back of the product. Never connect the  
product to the power outlet if the voltage  
is different.  
•
•
Never expose the product to rain, water,  
sunshine, or excessive heat.  
Avoid force coming onto power plugs.  
Loose power plugs can cause arcing or fire.  
2
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2 Your clock radio  
Congratulations on your purchase, and  
welcome to Philips!To fully benefit from the  
support that Philips offers, register your product  
at www.philips.com/welcome.  
Introduction  
With this product, you can:  
•
listen to FM radio stations (RDS  
supported),  
•
•
listen to DAB radio stations,  
listen to an external device through the  
AUDIO IN socket, and  
•
wake up to alarms.  
What's in the box  
Check and identify the contents of the package:  
ORD2105  
User Manual  
a Digital radio  
b User manual  
c AC power adaptor  
d Plug converter for AC power adaptor X 3  
EN  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Overview of the product  
a
b
c
k
j
i
h
g
d
f
e
•
•
Press to view the alarm settings.  
Press repeatedly to deactivate or  
activate the alarm timer.  
a TIMER  
•
Press and hold to start setting  
countdown timer.  
h PRESET  
b
•
Press to access the list of stored radio  
stations.  
•
•
•
In standby mode, press and hold to  
start setting time and date.  
In FM or DAB mode, press and hold to  
access the menus.  
When listening to an RDS or DAB  
station, press repeatedly to display  
available information.  
i
/
•
•
Press repeatedly to tune to a station.  
Press and hold to tune to the previous  
or next strong station automatically.  
Press to toggle through menus or  
options.  
•
c SLEEP  
•
Press repeatedly to set the sleep timer.  
j
•
•
Press and hold to start storing available  
radio stations automatically.  
Press to confirm an option.  
d SOURCE  
•
Press repeatedly to select a source.  
e Power and volume knob  
k SNOOZE/BRIGHTNESS  
•
Press to power on or off the product.  
•
Press to adjust the brightness of LCD  
•
Rotate to adjust volume.  
display.  
f LCD display  
•
When an alarm rings, press to snooze  
the alarm.  
g AL1/AL2  
•
Press and hold to start setting an alarm  
timer.  
•
When an alarm rings, press to stop the  
alarm.  
4
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Know about the LCD display  
b
a
c
d
f
e
g
a The first alarm is activated.  
b The second alarm is activated.  
c The clock  
d Text information  
e The sleep timer is activated.  
f The countdown timer is activated.  
g The current source  
EN  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3 For the first  
Connect power  
time use  
Assemble the AC power  
adaptor  
Connect the AC power adaptor between  
•
the DC-IN socket on the back panel,  
and  
•
the AC power outlet.  
» The product switches to standby mode.  
» [0:00] blinks.  
Power on  
1 Align the plug converter to the holes on  
the power adaptor.  
Press the power and volume knob.  
» The product is powered on and  
switches to the last mode.  
2 Push the plug converter downwards until  
you hear a "click".  
Replace a plug converter  
Switch to standby mode  
Press the power and volume knob again.  
» If the clock is neither manually set nor  
automatically synchronized with a DAB  
radio station, [0:00] blinks.  
» If the clock is manually set or  
automatically synchronized with a  
DAB radio station, the time and date is  
displayed.  
Adjust brightness  
1 Press down the clip.  
2 Slide the plug converter outwards.  
3 Pull the plug converter out.  
Press BRIGHTNESS repeatedly to adjust the  
brightness of the LCD display.  
4 Fix another plug converter to the power  
adaptor.  
6
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4 Set time and  
date  
Note  
• To manually set the clock, switch the product to  
standby mode first.  
1 In standby mode, press and hold  
until [Set time] is displayed.  
» The hour digits blink.  
2 Press  
/
to set the hour, and then  
press  
to confirm.  
» The minute digits blink.  
3 Press to set the minute, and then  
/
press to confirm.  
» The date is displayed with the day  
digits blink.  
4 Press  
/
to set the day, and then  
press  
to confirm.  
» The month digits blink.  
5 Press to set the month, and then  
/
press to confirm.  
» The year digits blink.  
6 Press  
/
to set the year, and then  
press to confirm.  
» [Time saved] flashes, and then the set  
clock and date are displayed.  
Tip  
• When a DAB radio station that transmits time signals is  
broadcast, the product synchronizes its clock with the  
DAB radio station automatically.  
EN  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
6 Press  
/
to select the volume level,  
5 Use the alarm  
timer  
and then press  
to confirm.  
» [Alarm Saved] flashes.  
Deactivate a preset alarm  
Note  
1 Press AL1 (or AL2) to view alarm settings.  
• Make sure that you have set the clock correctly.  
2 Press AL1 (or AL2) again.  
» [Alarm 1] (or [Alarm 2]) and [On] is  
displayed.  
3 Press AL1 (or AL2) repeatedly to select  
Set an alarm  
[On] or [Off].  
•
•
[On]:The preset alarm is activated.  
[Off]:The preset alarm is deactivated.  
You can set two alarms.  
1 Press and hold AL1 (or AL2) for two  
» AL1 (or AL2) is displayed when the  
seconds.  
preset alarm is activated.  
» [Alarm 1] (or [Alarm 2]) is displayed  
with AL1 (or AL2) blinking.  
» AL1 (or AL2) disappears when the  
preset alarm is deactivated.  
» The current alarm time is displayed  
with hour digits blinking.  
2 Press  
/
to set the hour, and then  
Snooze the alarm  
press  
to confirm.  
» The minute digits begin to blink.  
When an alarm sounds, press SNOOZE.  
» The alarm repeats after 9 minutes.  
3 Press  
/
to set the minute, and then  
press  
to confirm.  
» The alarm source name begins to  
blinks: [DAB], [FM], or [Buzzer].  
Stop the alarm  
4 Press  
/
to select an alarm source,  
When the first (or second) alarm sounds, press  
AL1 (or AL2).  
and then press  
to confirm.  
•
If [DAB] or [Buzzer] is selected as  
the alarm source, press  
select a preset radio station or the last  
listened station.  
» The alarm stops and then repeats at  
the set time.  
to  
» The alarm frequency blinks: [Daily]  
(daily), [Weekdays] (weekdays),  
[Weekends] (weekends), or [Once]  
(once).  
5 Press  
/
to select a frequency, and  
then press  
to confirm.  
» The alarm volume level blinks.  
8
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
6 Listen to FM  
radio stations  
Search for a radio station  
manually  
Press  
/
repeatedly until the frequency of  
target radio station is displayed.  
Note  
Store radio stations  
automatically  
• For optimal reception, fully extend the antenna and  
adjust its position.  
• You can store a maximum of 20 FM radio stations.  
Press and hold  
displayed.  
until [Auto] is  
» After the search is complete, the first  
stored radio station is broadcast.  
Switch to FM mode  
•
To tune to a stored radio station, press  
PRESET to access the list of stored radio  
stations, and then press  
/
repeatedly.  
Program radio stations  
manually  
1 Tune to a radio station.  
2 Press and hold PRESET until [Preset  
Press SOURCE repeatedly until [FM Mode] is  
displayed.  
store] is displayed.  
» FM is highlighted.  
3 Press  
/
repeatedly to select a preset  
sequence number.  
» The current frequency is displayed.  
4 Press PRESET to confirm.  
» The radio station is stored with the  
selected sequence number.  
Search for a radio station  
automatically  
5 Repeat steps 1-4 to program more radio  
stations.  
•
To tune to a stored radio station, press  
PRESET to access the list of stored radio  
Press and hold  
displayed.  
/
until [Scanning...] is  
stations, and then press  
/
repeatedly.  
» After a strong radio station is detected,  
the search stops and the radio station  
is broadcast.  
Note  
• If you store a radio station with the sequence number  
of another one, the earlier one is overwritten.  
EN  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
TRAVEL  
LEISURE  
JAZZ  
COUNTRY  
NATION M  
OLDIES  
FOLK M  
DOCUMENT  
TES  
Travel  
Leisure  
Display RDS information  
Jazz Music  
Country Music  
National Music  
Oldies Music  
Folk Music  
Documentary  
AlarmTest  
Alarm  
Radio Data System (RDS) is a service that  
allows FM stations to transmit additional  
information.When you tune to an FM radio  
station that transmits RDS signals, the station  
name is displayed.  
1 Tune to an RDS station.  
2 Press  
repeatedly to scroll  
through the following information (if  
available):  
ALARM  
•
•
•
Station name  
Radio text  
Program type such as [NEWS] (news),  
[SPORT] (sport), [POP M] (pop  
music)...  
Adjust FM settings  
1 Press and hold  
to access the FM  
•
Stereo/Mono  
menu.  
2 Press  
/
to display the [Scan setting]  
RDS program types  
menu.  
3 Press  
to access sub-menus.  
to select an option.  
NOTYPE  
NEWS  
AFFAIRS  
INFO  
No RDS programme type  
News services  
4 Press  
/
•
•
[Strong stations]: Search for strong  
stations only.  
[All stations]: Search for all stations no  
matter whether the signal strength of a  
station is strong or weak.  
Politics and current affairs  
Special information programs  
Sports  
Education and advanced training  
Radio plays and literature  
Culture, religion and society  
Science  
SPORT  
EDUCATE  
DRAMA  
CULTURE  
SCIENCE  
VARIED  
5 Press  
to confirm the option.  
Entertainment programs  
Pop music  
POP M  
ROCK M  
MOR M  
Rock music  
Light music  
LIGHT M  
CLASSICS  
OTHER M  
WEATHER  
FINANCE  
CHILDREN  
Light classical music  
Classical music  
Special music programs  
Weather  
Finance  
Children’s programs  
SOCIAL  
RELIGION  
PHONE IN  
Social Affairs  
Religion  
Phone In  
10 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4 Press  
/
repeatedly to select a station,  
7 Listen to DAB  
radio stations  
and then press PRESET to start listening.  
Tip  
• You can re-scan to update the list of stored stations  
(see 'Re-scan for stations' on page 13).  
• You can tune to a station manually (see 'Tune to a  
station manually' on page 13).  
Note  
• For optimal reception, fully extend the antenna and  
adjust its position.  
• You can program a maximum of 20 DAB radio stations.  
• Check with local retailer or go to www.WorldDAB.org  
for applicable DAB radio frequencies in your area.  
About special symbols  
Some symbol may be displayed before the  
name of a station.  
•
H:The station is one of your 10 favorite  
stations.  
Switch to DAB mode  
•
•
?:The station is unavailable or inactive.  
:The station is a primary station with  
secondary service.  
•
:The station is a secondary station.  
Tune to a stored radio station  
1 Press  
/
repeatedly to select a station.  
2 Press PRESET to start listening.  
Press SOURCE repeatedly until [DAB Mode]  
is displayed.  
Program radio stations  
» DAB is highlighted.  
1 Tune to a DAB radio station.  
2 Press and hold PRESET to activate the  
For the first time use  
programming.  
3 Press  
/
repeatedly to select a preset  
1 Press SOURCE repeatedly to switch the  
sequence number.  
product to DAB mode.  
4 Press PRESET to confirm.  
» The radio station is stored with the  
selected sequence number.  
2 Press  
scan] menu is displayed.  
to activate the automatic  
/
repeatedly until the [Full  
3 Press  
search.  
5 Repeat steps 1-4 to program more radio  
» This product automatically stores radio  
stations with sufficient signal strength.  
stations.  
•
To tune to a stored radio station, press  
PRESET to access the list of stored radio  
» After the search is complete, the  
first stored radio station is broadcast  
automatically.  
stations, and then press  
/
repeatedly.  
EN 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Note  
Tune to a station manually  
• If you store a radio station with the sequence number  
of another one, the earlier one is overwritten.  
With this feature, you can tune to a specific  
channel/frequency manually. In addition to  
antenna orientation for better radio reception,  
the optimal reception can also be obtained with  
this feature.  
Display DAB information  
The name of current DAB station is displayed.  
You can also view the other information.  
To cycle through available information, press  
repeatedly.  
1 Press  
to access the station list.  
2 Press  
/
repeatedly to select a station  
•
•
•
•
•
•
•
Dynamic label segment (DLS)  
Signal strength  
Program type (PTY)  
Ensemble name  
Frequency  
from 5A to 13F.  
Signal error rate  
Bitrate codec  
3 Press  
to confirm the option.  
DRC (Dynamic Range Control)  
DRC adds or removes a degree of  
compensation for the differences in the dynamic  
range between radio stations.  
Use DAB menus  
1 Press and hold  
to access the  
DAB menus.  
2 Press  
/
repeatedly to toggle through  
the menus.  
1 Press  
to access the sub-menus.  
repeatedly to select an  
Re-scan for stations  
2 Press  
/
Full scan is used to perform a wide range  
search for DAB radio stations.  
option. (The asterisk behind the option  
indicates the current setting.)  
•
•
[DRC off]: No compensation applied.  
[DRC low]: Medium compensation  
applied.  
•
[DRC high]: Maximum compensation  
applied.  
Press  
to start scanning for available  
DAB stations.  
3 Press  
to confirm the option.  
» After the scanning is complete, the first  
stored station is broadcast.  
12 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Remove invalid stations  
Some stations in the list have no service when  
you travel to another area. In front of the  
station name of an invalid station, a question  
mark (?) is displayed.  
1 Press  
to access the sub-menus.  
repeatedly to select an  
2 Press  
/
option.  
•
•
[No]: Return to the previous menu.  
[Yes]: Remove invalid stations from the  
station list.  
3 Press  
to confirm the option.  
System menus  
1 Press  
to access system menus.  
repeatedly to select a sub-  
2 Press  
/
menu.  
•
For details, refer to the section 'Use  
system menus'.  
EN 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8 Listen to an  
external device  
You can also listen to an external audio device,  
for example, MP3 player, through this product.  
1 Press SOURCE repeatedly to switch the  
source to [AUX IN].  
» AUX is highlighted.  
2 Connect an audio input cable with a 3.5  
mm connector on both ends to  
•
the AUDIO-IN socket on the back  
panel of this product, and  
the headphone socket on the external  
device.  
•
3 Play audio on the external device (refer to  
its user manual).  
14 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
9 Use system  
menus  
Reset the product  
Use the system menus to  
1 Press  
to display the options.  
repeatedly to select an  
•
check the version of current software of  
this product,  
2 Press  
/
•
•
upgrade the software, and  
reset the product to factory default status.  
option.  
•
•
[No]: Return to the previous menu.  
[Yes]: Reset the product to factory  
default status.  
Check the current software  
version  
3 Press  
to confirm the option.  
Press  
to display the version of  
current software.  
Upgrade the software  
1 Go to www.philips.com/support.  
2 Search for support information about  
this product with “OR2200/10” /  
“OR2200M/10” as the keyword.  
» When an upgrade packet is available,  
the link of “Installation instructions”  
under “Software & drivers” is  
accessible.The exact wording of link  
names may vary in different languages.  
3 Click the link of “Installation instructions”.  
4 Read and understand the instructions on  
software upgrade.  
5 Follow the instructions to complete the  
upgrade.  
EN 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
10 Adjust volume  
•
To increase the volume, turn the power  
and volume knob clockwise.  
•
To decrease the volume, turn the power  
and volume knob anti-clockwise.  
16 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
11 Use the sleep  
timer  
You can set a time period after which  
the product switches to standby mode  
automatically.  
Press SLEEP repeatedly to select a time period  
(in minutes).  
» When the sleep timer is activated,  
appears.  
» After the set period, the product  
switches to standby mode.  
•
To deactivate the sleep timer, press  
SLEEP repeatedly until [Sleep off]  
appears.  
EN 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
12 Use the  
countdown  
timer  
You can set a time period after which the  
product buzzes.  
1 Press and hold TIMER until blinks.  
» The hour digits blink.  
2 Press  
and then press  
» The minute digits blink.  
/
repeatedly to set the hour,  
to confirm.  
3 Press  
/
repeatedly to set the minute,  
to confirm.  
and then press  
» The second digits blink.  
4 Press  
/
repeatedly to set the second,  
and then press  
to confirm.  
»
stops blink.  
•
To stop the buzzer, press TIMER or the  
power and volume knob.  
18 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
13 Troubleshooting  
Warning  
• Never remove the casing of this product.  
To keep the warranty valid, never try to repair  
the product yourself.  
If you encounter problems when using this  
product, check the following points before  
requesting service. If the problem remains  
unsolved, go to the Philips Web page (www.  
philips.com/support).When you contact the  
Consumer Care, make sure that the product  
is nearby and the model number and serial  
number are available.  
No power  
•
Make sure that the AC power cord is  
properly connected.  
•
Make sure that there is power at the AC  
power outlet.  
No sound  
•
•
Adjust the volume.  
When listening to an external device, make  
sure that the external device is not muted.  
No response from the product  
•
•
Make sure that the power is available.  
Turn off the product, and then turn it on  
again.  
Poor radio reception  
•
Due to the interference from other  
electrics or building obstacles, the signals  
become weak. Move the product to a  
place free of interference.  
•
Make sure that the antenna is fully extended.  
Adjust the position of the antenna.  
Clock/alarm setting is erased.  
•
Power has been interrupted, or the AC  
power adaptor has been disconnected.  
Set the clock/alarm again.  
•
EN 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
14 Product  
information  
Speakers  
Speaker Impedance  
Speaker Driver  
Sensitivity  
4 Ohm  
3" full range  
> 82x dB/m/W  
Note  
• Product information is subject to change without prior  
notice.  
Amplifier  
Output Power  
3 W RMS  
Frequency Response  
60 Hz - 16 kHz,  
±3 dB  
> 65 dBA  
General information  
Signal to Noise Ratio  
Audio Input  
AC power adaptor  
Model No.: OH-  
1015E0591500U1  
Brand name: Philips  
Input: 100-240V~,  
50/60Hz, 350 mA;  
Output: 5.9V 1.5 A  
2 W  
0.5V RMS 20 kOhm  
Operation power  
consumption  
Standby power  
consumption  
Dimensions:  
- Main unit  
< 1 W  
(W x H x D)  
Weight:  
- Main unit  
245 x 123 x 122 mm  
1.1 kg  
Tuner  
Tuning Range  
FM: 87.50 - 108.00  
MHz;  
DAB: 174.928-239.200  
MHz  
Tuning grid  
50 kHz  
DAB sensitivity  
(EN50248)  
< -95 dbm  
Total Harmonic  
Distortion  
< 2%  
Signal to Noise Ratio > 50 dBA  
Number of preset  
radio stations  
20 (FM), 20 (DAB)  
20 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Please act according to your local rules and  
do not dispose of your old products with your  
normal household waste.  
15 Notice  
Correct disposal of your old product helps to  
prevent potential negative consequences for the  
environment and human health.  
Any changes or modifications made to this  
device that are not expressly approved by  
WOOX Innovations may void the user’s  
authority to operate the equipment.  
Environmental information  
All unnecessary packaging has been omitted.  
We have tried to make the packaging easy to  
separate into three materials: cardboard (box),  
polystyrene foam (buffer) and polyethylene  
(bags, protective foam sheet.)  
Compliance  
Your system consists of materials which can  
be recycled and reused if disassembled by  
a specialized company. Please observe the  
local regulations regarding the disposal of  
packaging materials, exhausted batteries and old  
equipment.  
This product complies with the radio  
interference requirements of the European  
Community.  
Copyright  
2014 © WOOX Innovations Limited.All rights  
reserved.  
This is CLASS II apparatus with double  
insulation, and no protective earth provided.  
Philips and the Philips’ Shield Emblem are  
registered trademarks of Koninklijke Philips N.V.  
and are used by WOOX Innovations Limited  
under license from Koninklijke Philips N.V.”  
Specifications are subject to change without  
notice.WOOX reserves the right to change  
products at any time without being obliged to  
adjust earlier supplies accordingly.  
Care of the environment  
Your product is designed and manufactured  
with high quality materials and components,  
which can be recycled and reused.  
When this crossed-out wheeled bin symbol is  
attached to a product it means that the product  
is covered by the European Directive 2002/96/  
EC. Please inform yourself about the local  
separate collection system for electrical and  
electronic products.  
EN 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Specifications are subject to change without notice.  
2014 © WOOX Innovations Limited.All rights reserved.  
Philips and the Philips’ Shield Emblem are registered  
trademarks of Koninklijke Philips N.V. and are used by WOOX  
Innovations Limited under license from Koninklijke Philips N.V.  
OR2200_10_UM_V2.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Philips Computer Drive FM16FD00B User Manual
Philips Flat Panel Television BDL4771V User Manual
Philips Telephone SE 7450 User Manual
Philips Universal Remote 12 User Manual
Polk Audio Portable Speaker RTS Series User Manual
Poulan Lawn Mower Accessory 156239 User Manual
Poulan Snow Blower PP927ESC User Manual
Professional Series Burner PS77301 User Manual
PVI Industries Water Heater PV 6314 User Manual
PYLE Audio Impact Driver PT502 User Manual