Philips Car Stereo System CE132 User Manual
Always there to help you  
Register your product and get support at  
www.philips.com/welcome  
CE132  
Question?  
Contact  
Philips  
User manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
10 Product Information  
11 Troubleshooting  
20  
21  
1 Safety  
2
2 Your car audio system  
Introduction  
3
3
3
4
What's in the box  
Overview of the system  
12 Notice  
22  
22  
22  
22  
Care of the environment  
Trademark notice  
Copyright  
3 Install the car audio system  
Connect wires  
7
7
8
9
Mount into the dashboard  
Attach the front panel  
13 Glossary  
23  
4 Get started  
For the first time use  
Set the time format  
Set the clock  
10  
10  
10  
10  
10  
10  
11  
Select a source  
Select a listening zone  
Mute the button beep  
5 Listen to radio  
Select a tuner region  
Select a tuner sensitivity  
Search for a radio station  
Store radio stations in memory  
Play with RDS  
12  
12  
12  
12  
12  
13  
6 Play from a storage device  
Control play  
15  
15  
15  
Switch tracks  
7 Listen to an external player  
8 Adjust sound  
17  
18  
9 Additional information  
Reset the system  
19  
19  
19  
Replace the fuse  
EN  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
1 Safety  
Read and understand all instructions before you  
use this device. If damage is caused by failure to  
follow instructions, the warranty does not apply.  
•
Modification of the product could result  
in hazardous radiation of EMC or other  
unsafe operation.  
•
•
•
The device is designed for negative ground  
(earth) 12V DC operation only.  
To ensure safe driving, adjust the volume to  
a safe and comfortable level.  
Improper fuses can cause damage or  
fire.When you need to change the fuse,  
consult a professional.  
•
•
•
•
Use only the supplied mounting hardware  
for a safe and secure installation.  
To avoid short circuits, do not expose the  
device to rain or water.  
The device shall not be exposed to  
dripping or splashing.  
Do not place any sources of danger on  
the device (e.g. liquid filled objects, lighted  
candles).  
•
•
Never insert objects into the ventilation  
slots or other openings on the device.  
Clean the device with soft, damp cloth.  
Never use substances such as alcohol,  
chemicals or household cleaners on the  
device.  
2
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
•
•
ID3 tagV2.0 or later  
Unsupported files:  
AAC,WAV, and PCM files  
DRM protected WMA files (.wav, .m4a,  
.m4p, .mp4, and .aac)  
2 Your car audio  
system  
WMA files in lossless format  
Congratulations on your purchase, and  
welcome to Philips!To fully benefit from the  
support that Philips offers, register your product  
at www.philips.com/welcome.  
What's in the box  
Check and identify the contents of the package:  
a
b
c
Introduction  
With this system, you can:  
•
enjoy audio from USB storage devices,  
SD/SDHC card, and other external players,  
and  
d
e
f
•
listen to radio stations.  
You can enrich sound output with these sound  
effects:  
•
•
Dynamic bass boost (DBB)  
Digital sound control (DSC)  
a Main unit (with a sleeve)  
b Carrying case (with front panel included)  
c Trim plate  
Playable media:  
•
USB storage device  
•
•
Compatibility: USB 2.0, USB 1.1  
Class support: MSC (Mass Storage  
Class)  
d Disassembly tool X 2  
e User manual  
•
Maximum capacity: 32 GB  
f CD-ROM for user manual  
•
•
SD/SDHC card  
•
Files  
•
•
•
Maximum capacity: 32 GB  
File system: FAT16, FAT32  
Maximum number of folders: 99  
Maximum number of tracks/files: 999  
Maximum level of directory: 8  
.mp3 files  
•
•
Sampling frequencies: 32 kHz, 44.1 kHz,  
48 kHz  
Bitrates: 8-320 kbps and variable  
bitrates  
•
.wma files  
Versions:V4,V7,V8,V9 (L1 and L2)  
Sampling frequencies: 44.1 kHz, 48 kHz  
Bitrates: 64-192 kbps and variable  
bitrates  
EN  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Overview of the system  
a
b
c
d
e
t srq  
p
o
n m  
l k j i h g  
v
f
u
f MP3-LINK  
a
•
Connect to the audio output socket  
(usually the headphone socket) of an  
external device.  
•
Unlock the front panel.  
b
•
•
•
For .wma and .mp3 tracks, press to  
select the previous folder.  
Press and hold to access the system  
menu.  
g
•
•
•
Start, pause, or resume the play of  
tracks.  
In radio mode, press to select the  
preset radio station of No. 6.  
In radio mode, press and hold to store  
the current radio station at channel  
No. 6.  
Press to select a tuner band.  
c
•
Return to the previous menu.  
d LCD screen  
e
•
Connect to a USB storage device.  
4
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
•
For .wma and .mp3 tracks, press to  
access the track list.  
h
i
•
•
In radio mode, press to select the  
preset radio station of No. 5.  
In radio mode, press and hold to store  
the current radio station at channel  
No. 5.  
m
/DSP  
•
•
•
Press repeatedly to display available  
information about the current track.  
Press repeatedly to display available  
RDS information.  
Press and hold to display the set clock.  
•
•
In radio mode, press to select the  
preset radio station of No. 4.  
In radio mode, press and hold to store  
the current radio station at channel  
No. 4.  
For .wma and .mp3 tracks, press  
repeatedly to select a play mode: play  
all tracks randomly ([SHU ALL]), play  
tracks in the current folder randomly  
([SHU FLD]), or play all tracks in the  
storage device in sequence ([SHU  
OFF]).  
n AS/SOURCE  
•
•
Press repeatedly select a source.  
In radio mode, press and hold to  
activate the automatic search of radio  
stations.  
•
o
p
•
•
Press repeatedly to select a preset  
sound equalizer.  
Press and hold to activate the setup of  
bass, treble, balance, and fader.  
j
•
•
•
Press to turn on the system.  
Press and hold to turn off the system.  
Press to mute the speakers or release  
them from mute status.  
Press to confirm an option.  
Rotate to switch between menu  
options.  
•
•
In radio mode, press to select the  
preset radio station of No. 3.  
In radio mode, press and hold to store  
the current radio station at channel  
No. 3.  
For .wma and .mp3 tracks, press  
repeatedly to select a repeat mode:  
repeat the current track ([REP ONE]),  
repeat all tracks in the current folder  
([RPT FLD]), or repeat all tracks in the  
storage device ([RPT ALL]).  
•
•
•
•
Rotate to adjust the volume level.  
q
r
•
•
•
For .wma and .mp3 tracks, press to  
select the next folder.  
Press and hold to activate the selection  
of listening zones.  
k
l
•
•
In radio mode, press to select the  
preset radio station of No. 2.  
In radio mode, press and hold to store  
the current radio station at channel  
No. 2.  
Press to select a tuner band.  
/
•
•
Tune to a radio station.  
Press to skip to the previous/next  
track.  
Press and hold to rewind a track or  
search fast forward.  
•
For .wma and .mp3 tracks, press to  
access the folder list.  
•
•
•
In radio mode, press to select the  
preset radio station of No. 1.  
In radio mode, press and hold to store  
the current radio station at channel  
No. 1.  
EN  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
s
•
•
Press to enable or disable the  
maximum volume.  
Press and hold to enable or disable  
the DBB (dynamic bass boost) sound  
effect.  
t BAND  
•
Press repeatedly to select a tuner band.  
u Slot for SD/SDHC card  
•
Insert an SD/SDHC card.  
v RESET  
•
Press to reset the system to factory  
default settings.  
6
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3 Install the car  
audio system  
Connect wires  
Note  
• The ISO male connectors are not supplied.  
• Make sure that all loose leads are insulated with  
electrical tape.  
Caution  
• Consult a professional to connect wires as instructed below.  
• Use the controls only as stated in this user manual.  
1 Check the car's wiring carefully and connect  
Always follow the instructions in this chapter in  
sequence.  
them to the the ISO male connectors.  
These instructions are for a typical installation.  
However, if your car has different requirements,  
make the adjustment accordingly. If you have  
any question regarding installation kits, consult  
your local retailer.  
Note  
• This system is designed for negative ground (earth) 12V  
DC operation only.  
• Always install this system in the car dashboard. Other  
locations can be dangerous as the rear of the system  
heats up during use.  
• To avoid short-circuit: before you connect, make sure  
that the ignition is off.  
ISO male  
connectors  
Connect to  
• Make sure that you connect the yellow and red power  
supply leads after all other leads are connected.  
• Make sure that all loose leads are insulated with  
electrical tape.  
• Make sure that the leads do not get caught under  
screws iron parts that will move (e.g. seat rail).  
• Make sure that all ground (earth) leads are run to a  
common ground (earth) point.  
a
b
c
d
e
f
Green strip, black- Rear left speaker  
edged green strip  
White strip, black- Front left speaker  
edged white strip  
Gray strip, black-  
edged gray strip  
Purple strip, black- Rear right speaker  
edged purple strip  
Front right speaker  
• Use only the supplied mounting hardware for a safe  
and secure installation.  
• Improper fuses can cause damage or fire.When you  
need to change the fuse, consult a professional.  
• When you connect other devices to this system, make  
sure that the rating of the car circuit is higher than the  
total fuse value of all the connected devices.  
• Never connect speaker wires to the metal body or  
chassis of the car.  
Red strip  
Ignition key +12V  
DC when ON/ACC  
Motor/electric  
antenna relay control  
lead  
Blue strip  
• Never connect speaker wires with stripes to one  
another.  
g
White-edged blue Amplifier relay  
strip  
control lead  
h
i
Black strip  
Yellow strip  
Ground  
To the +12V car  
battery which is  
energized at all times  
EN  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2 Connect the antenna and amplifier as  
1 Make sure that the car dashboard opening  
illustrated, if applicable.  
is within these measurements:  
L
5mm  
REAR  
R
183 mm  
53mm  
d
c b  
a
2 Remove the mounting sleeve with the  
supplied disassembly tools.  
Sockets on rear  
panel  
External sockets or  
connectors  
1
For ISO male  
connectors  
REAR L  
REAR R  
ANTENNA  
As indicated above  
2
3
4
Rear left speaker  
Rear right speaker  
Antenna  
Tip  
• The pin arrangement for the ISO connectors depends  
on the type of your vehicle.To avoid damage to the  
unit, connect properly.  
3 Install the sleeve into the dashboard and  
bend the tabs outward to fix the sleeve.  
Mount into the dashboard  
•
If the car does not have an on-board drive  
or navigation computer, disconnect the  
negative terminal of the car battery.  
If the car battery is not disconnected, to  
avoid short-circuit, make sure that the bare  
wires do not touch each other.  
53.5 m m  
183 mm  
•
8
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4 Slide the unit into the sleeve until you hear  
a "click".  
2 Press the left end of the front panel  
inwards until it is securely locked with a  
"click".  
5 Attach the trim plate.  
Detach the front panel  
Note  
• Before you insert an SD/SDHC card or reset the  
system, detach the front panel.  
• Before you detach the front panel, make sure that the  
system is turned off.  
1 Press  
to release the front panel.  
6 Reconnect the negative terminal of the car  
battery.  
2 Pull the front panel outwards to remove it.  
Attach the front panel  
1 Insert the notch on the front panel to the  
chassis on the main unit.  
EN  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4 Get started  
Set the clock  
1 Press and hold  
to access the system  
menu.  
2 Press  
/
repeatedly until [CLK] is  
For the first time use  
displayed with time digits blinking.  
3 Rotate  
4 Rotate  
anti-clockwise to set the hour.  
clockwise to set the minute.  
1 Press  
to turn on the system.  
» [PHILIPS] is displayed and then  
[SELECT OPERATING REGION]  
(select a radio region) scrolls.  
Display the clock  
2
When one of the following options is  
Press and hold /DISP until [CLK] and the set  
clock are displayed.  
displayed, rotate  
to select a radio  
region that matches your location.  
•
To exit the clock display, press any button  
or rotate  
•
•
•
•
•
•
•
•
[AREA EUROPE] (Western Europe)  
[AREA ASIA] (Asia Pacific)  
[AREA MID--EAST] (Middle East)  
[AREA AUST] (Australia)  
.
Select a source  
[AREA RUSSIA] (Russia)  
[AREA USA] (United States)  
[AREA LATIN] (Latin America)  
[AREA JAPAN] (Japan)  
Press AS/SOURCE repeatedly to select a  
source.  
•
•
[RADIO]: Listen to FM/AM radio.  
[MP3--LINK]: Listen to the audio input  
through the MP3-LINK socket.  
[USB]:When a USB storage device is  
connected and recognized, you can select  
this source to play audio files that are  
stored on it.  
[SD/SDHC]:When an SD/SDHC card is  
inserted and recognized, you can select this  
source to play audio files that are stored  
on it.  
3 Press  
to confirm.  
» The system switches to radio mode  
automatically.  
•
•
•
To turn off the system, press and hold  
until the screen backlight is off.  
Set the time format  
1 Press and hold  
to access the system  
menu.  
2 Press  
or [CLK 12H] is displayed.  
3 Rotate to select [CLK 24H] or [CLK  
12H].  
/
repeatedly until [CLK 24H]  
Select a listening zone  
1 Press and hold  
until one of the  
following options is displayed.  
•
•
[CLK 24H]: 24-hour time format  
[CLK 12H]: 12-hour time format  
•
•
•
[ALL]: For all passengers  
[FRONT-L]: For the front-left seat only  
[FRONT-R]: For the front-right seat  
only  
•
[FRONT]: For front passengers only  
10 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2 Press  
/
repeatedly to select a  
listening zone.  
Mute the button beep  
The beep sound of buttons is enabled by  
default.  
1 Press and hold  
to access the system  
menu.  
2 Press  
/
repeatedly until [BEEP ON]  
or [BEEP OFF] is displayed.  
•
[BEEP ON]: Enable the beep sound of  
buttons.  
•
[BEEP OFF]: Mute the beep sound of  
buttons.  
3 Rotate  
to change the setting.  
EN 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
5 Listen to radio  
Search for a radio station  
Search for a radio station  
automatically  
Select a tuner region  
Press  
or  
to search for the previous or  
next radio station with strong signals.  
You can select a radio region that matches your  
location.  
1 In radio mode, press and hold  
to access  
Search for a radio station manually  
the system menu.  
1 Press and hold  
or  
or  
until [M] blinks.  
2 Press  
/
repeatedly until one of the  
2 Press  
repeatedly until the  
following options is displayed.  
target frequency is displayed.  
•
•
•
•
•
•
•
•
[AREA EUROPE] (Western Europe)  
[AREA ASIA] (Asia Pacific)  
[AREA MID--EAST] (Middle East)  
[AREA AUST] (Australia)  
Store radio stations in  
memory  
[AREA RUSSIA] (Russia)  
[AREA USA] (United States)  
[AREA LATIN] (Latin America)  
[AREA JAPAN] (Japan)  
Note  
3 Rotate  
to select a region.  
• You can store a maximum of six stations in each band.  
Select a tuner sensitivity  
Store radio stations automatically  
To search for radio stations with strong signals  
only or more radio stations, you can change the  
tuner sensitivity.  
1 Switch the source to [RADIO].  
2 Press BAND, , or  
repeatedly to  
1 Press and hold  
to access the system  
select a band.  
menu.  
3 Press and hold AS/SOURCE until  
2 Press  
/
repeatedly until [LOC ON]  
[STORE---] is displayed.  
or [LOC OFF] is displayed.  
» After the search is complete, the  
first stored radio station is broadcast  
automatically.  
3 Rotate  
to select a setting.  
[LOC ON]: Search for radio stations  
with strong signals only.  
•
•
To select a stored radio station, press  
, , or  
•
[LOC OFF]: Search for radio stations  
with strong and weak signals.  
,
,
,
.
Store radio stations manually  
1 Press BAND, , or  
repeatedly to  
select a tuner band.  
12 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2 Tune to the radio station that you want to  
4 Rotate  
then press  
to select a program type, and  
store.  
to confirm.  
3 Press and hold  
, or to store the radio station at the  
selected channel.  
To select a stored radio station, press  
, , or  
,
,
,
,
Item Program  
type  
Description  
1
2
NEWS  
AFFAIRS  
News services  
Politics and current  
affairs  
•
,
,
,
.
3
INFO  
Special information  
programs  
Play with RDS  
4
5
SPORT  
EDUCATE  
Sports  
Education and advanced  
training  
Radio plays and  
literature  
Culture, religion and  
society  
The RDS (Radio Data System) function  
operates only in areas with FM stations  
broadcasting RDS signals. If you tune to an RDS  
station, the station name is displayed.  
6
DRAMA  
7
CULTURE  
Enable the RDS function  
8
9
SCIENCE  
VARIED  
POP M  
Science  
Entertainment programs  
Pop music  
Note  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
ROCK M  
EASY M  
Rock music  
Light music  
Light classical music  
Classical music  
Special music programs  
Weather  
• The RDS function is enabled by default.  
• Only when the RDS function is enabled, RDS related  
settings can be accessed.  
LIGHT M  
CLASSICS  
OTHER M  
WEATHER  
FINANCE  
1 Press and hold  
to access the system  
menu.  
2 Press  
/
repeatedly until [RDS ON]  
Finance  
or [RDS OFF] is displayed.  
3 Rotate to select [RDS ON].  
» The RDS function is enabled.  
CHILDREN Children’s programs  
SOCIAL  
RELIGION  
PHONE IN  
TRAVEL  
LEISURE  
JAZZ  
COUNTRY Country Music  
NATION M National Music  
OLDIES  
FOLK M  
DOCUMENT Documentary  
Social Affairs  
Religion  
Phone In  
Travel  
Leisure  
Jazz Music  
•
To disable the RDS function, rotate  
to select [RDS OFF].  
Select a program type  
Before tuning to RDS stations, you can select  
a program type to search for programs of the  
selected category only.  
Oldies Music  
Folk Music  
1 Press and hold  
to access the system  
menu.  
TEST  
ALARM  
AlarmTest  
Alarm  
2 Press  
displayed.  
/
repeatedly until [PTY] is  
3 Press  
to access the list of program  
types.  
EN 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Tip  
Use alternate frequencies  
• When a traffic announcement cuts in, you can press  
If the signal of an RDS station is poor, enable  
the AF (Alternate Frequency) function to search  
for another station that broadcasts the same  
program.  
to switch the system to the previous mode.  
1 Press and hold  
to access the system  
Synchronize the system clock  
menu.  
You can synchronize the system clock with an  
RDS station that transmits time signals.  
2 Press  
/
repeatedly until [AF ON] or  
[AF OFF] is displayed.  
1 Press and hold  
to access the system  
3 Rotate  
to select a setting.  
[AF ON]: Enable the AF function.  
menu.  
•
•
[AF OFF]: Disable the AF function.  
2 Press  
/
repeatedly until [CT ON]  
or [CT OFF] is displayed.  
to select a setting.  
[CT ON]: Synchronize the  
Set the region for AF tuning  
You can set the region for AF tuning.  
3 Rotate  
•
•
1 Press and hold  
to access the system  
system clock with the RDS station  
automatically.  
[CT OFF]:The automatic clock  
synchronization with RDS station is  
disabled.  
menu.  
2 Press  
/
repeatedly until [REG ON]  
or [REG OFF] is displayed.  
3 Rotate  
to select a setting.  
[REG ON]: Only RDS stations in  
current region can be tuned to  
automatically.  
[REG OFF]:All RDS stations can be  
tuned to automatically.  
•
Tip  
• The accuracy of time depends on the RDS station that  
transmits time signals.  
•
Receive traffic announcement  
If you want to receive traffic announcement,  
enable theTA (Traffic Announcement) function.  
1 Press and hold  
to access the system  
menu.  
2 Press  
/
repeatedly until [TA ON] or  
[TA OFF] is displayed.  
to select a setting.  
[TA ON]:When a traffic  
3 Rotate  
•
announcement is on air, the system  
automatically switches to the tuner  
mode and begins to broadcast the  
traffic announcement.When the traffic  
announcement is over, the system  
returns to the previous mode.  
[TA OFF]:Traffic announcement does  
not cut in.  
•
14 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6 Play from a  
storage device  
Control play  
Button  
/
Function  
Press repeatedly to select a folder.  
Pause or resume play.  
Press to play the previous or next  
track.  
/
/
Press and hold to rewind a track  
or search forward fast.  
Press repeatedly to display  
available information about the  
current track.  
/DISP  
Press repeatedly to select a  
repeat mode:  
• [REP ONE]: repeat the current  
track,  
• [RPT FLD]: repeat all tracks in  
the current folder, or  
• [RPT ALL]: repeat all tracks in  
the storage device.  
Press repeatedly to select a play  
mode:  
• [SHU ALL]: play all tracks  
randomly,  
• [SHU FLD]: play tracks in the  
current folder randomly, or  
• [SHU OFF]: play all tracks in  
the storage device in sequence.  
1 Connect a compatible USB storage device  
or SD/SDHC card.  
•
For an SD/SDHC card, detach the  
front panel first, insert the card into  
the card slot, and then attach the front  
panel.  
2 Switch the source to [USB] or [SD/SDHC].  
Switch tracks  
•
When a USB storage device is  
connected and recognized, the  
system switches the source to [USB]  
automatically.  
During play, you can switch tracks or folders  
quickly.  
3 If the play does not start, press  
.
Switch tracks directly  
1 Press  
to access the track list.  
» The file name of current track scrolls.  
2 Rotate  
3 Press  
to toggle through tracks.  
to play the selected track.  
EN 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Switch folders for a track  
1 Press  
to access the folder list.  
» The name of current folder scrolls.  
2 Rotate  
to toggle through folders.  
to select the folder.  
3 Press  
» The system starts playing the first track  
under the folder.  
16 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7 Listen to an  
external player  
You can use the system to amplify the audio  
input from an external player, for example, MP3  
player.  
MP3-LINK  
1 Switch the source to [MP3--LINK].  
2 Connect an MP3 link cable to  
•
•
the MP3-LINK socket on the system,  
and  
the audio output socket (usually the  
headphone socket) on the external  
player.  
3 Play the external player.  
EN 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
8 Adjust sound  
The following operations are applicable to all  
supported media.  
Button Function  
Rotate to increase or decrease the  
volume level.  
Press to mute the speakers or release  
them from mute status.  
Press to enable or disable the  
maximum volume.  
Press and hold to enable or disable  
the Dynamic Bass Boost (DBB) effect.  
Press repeatedly to select a sound  
equalizer.  
1Press and hold to activate the setup  
of customized sound equalizer.  
2Press repeatedly to select an option:  
[BAS] (bass), [TRE] (treble), [BAL]  
(balance), or [FAD] (fader).  
3Rotate  
to adjust the setting.  
18 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3 Insert a new fuse with the same  
9 Additional  
information  
specifications (15 A).  
L
REAR  
R
Reset the system  
If the system works abnormally, reset the  
system to factory default settings.  
Note  
• If the fuse gets damaged immediately after it is  
replaced, an internal malfunction may occur. In such  
case, consult your Philips retailer.  
1 Detach the front panel.  
2 Press the RESET button with the tip of a  
ball-point pen or toothpick.  
» All settings are reset to factory default.  
Replace the fuse  
If there is no power, check the fuse and replace  
it if it is damaged.  
1 Check the electric connection.  
2 Remove the damaged fuse from the rear  
panel.  
EN 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
10 Product  
Information  
Note  
• Specifications are subject to change without prior  
notice.  
General  
Power supply  
12V DC (11V - 16V),  
negative ground  
15 A  
Fuse  
Suitable speaker  
impedance  
Maximum power  
output  
4 - 8  
50 W x 4 channels  
Continuous power  
output  
Pre-Amp output  
voltage  
22 W x 4 RMS  
(4 10%T.H.D.)  
2.5V  
Aux-in level  
500 mV  
Radio  
Frequency range  
- FM  
87.5 - 108.0 MHz  
(100kHz per step in  
auto search and 50kHz  
per step in manual  
search)  
Usable sensitivity -  
FM (S/N = 20 dB)  
Frequency range -  
AM(MW)  
Usable sensitivity -  
AM(MW)  
8 µV  
522 - 1620 KHz (9 kHz)  
530 - 1710 kHz (10 kHz)  
30 µV  
(S/N = 20 dB)  
20 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
11 Troubleshooting  
Warning  
• Never remove the casing of this product.  
To keep the warranty valid, never try to repair  
the product yourself.  
If you encounter problems when using this  
product, check the following points before  
requesting service. If the problem remains  
unsolved, go to the Philips Web page (www.  
philips.com/support).When you contact Philips,  
make sure that the product is nearby and the  
model number and serial number are available.  
No power or no sound  
•
The power supply from car battery is cut  
off, or the car battery runs out of energy.  
Power the system with car battery.  
Car engine is not on.Turn the car engine  
on.  
•
•
Cable is not correctly connected. Check  
connections.  
•
•
•
The fuse is burnt. Replace the fuse.  
Volume is too low.Adjust volume.  
If the above solutions cannot help, press  
the RESET button.  
•
Make sure that the current track is in a  
compatible format.  
Noise during broadcast  
•
Signals are too weak. Select other stations  
with stronger signals.  
•
•
Check the connection of the car antenna.  
Change the broadcast setting from stereo  
to mono.  
Preset stations are erased.  
•
Battery cable is not correctly connected.  
Connect the battery cable to the terminal  
that is always live.  
Display shows ERR-12.  
•
Data error. Check the USB storage device  
or SD/SDHC card.  
EN 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
12 Notice  
Trademark notice  
Any changes or modifications made to this  
device that are not expressly approved by  
Philips Consumer Lifestyle may void the user’s  
authority to operate the equipment.  
Windows Media and the Windows logo  
are trademarks, or registered trademarks of  
Microsoft Corporation in the United States  
and/or other countries.  
Other trademarks and trade names are those  
of their respective owners.  
Care of the environment  
Copyright  
Your product is designed and manufactured  
with high quality materials and components,  
which can be recycled and reused.  
2012 © Koninklijke Philips Electronics N.V.  
Specifications are subject to change without  
notice.Trademarks are the property of  
Koninklijke Philips Electronics N.V or their  
respective owners. Philips reserves the right  
to change products at any time without being  
obliged to adjust earlier supplies accordingly.  
When this crossed-out wheeled bin symbol is  
attached to a product it means that the product  
is covered by the European Directive 2002/96/  
EC. Please inform yourself about the local  
separate collection system for electrical and  
electronic products.  
Please act according to your local rules and  
do not dispose of your old products with your  
normal household waste.  
Correct disposal of your old product helps to  
prevent potential negative consequences for the  
environment and human health.  
Environmental information  
All unnecessary packaging has been omitted.  
We have tried to make the packaging easy to  
separate into three materials: cardboard (box),  
polystyrene foam (buffer) and polyethylene  
(bags, protective foam sheet.)  
Your system consists of materials which can  
be recycled and reused if disassembled by  
a specialized company. Please observe the  
local regulations regarding the disposal of  
packaging materials, exhausted batteries and old  
equipment.  
22 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
13 Glossary  
M
MP3  
A file format with a sound data compression  
system. MP3 is the abbreviation of Motion  
Picture Experts Group 1 (or MPEG-1) Audio  
Layer 3.  
S
SD  
Secure Digital.A type of memory card with a  
flash memory.  
SDHC  
Secure Digital High Capacity (SDHC) is a type  
of flash memory card based on the SDA 2.00  
specification.The SDA 2.00 specification enables  
SD cards to reach higher capacities from 4GB  
to 32GB, and growing.  
W
WMA (Windows Media Audio)  
An audio format owned by Microsoft, is a  
part of Microsoft Windows Media technology.  
Includes Microsoft Digital Rights Management  
tools,Windows MediaVideo encoding  
technology, and Windows Media Audio  
encoding technology.  
EN 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Specifications are subject to change without notice  
© 2012 Koninklijke Philips Electronics N.V.  
All rights reserved.  
CE132_12_UM_V3.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pelco Home Security System C1995M A User Manual
Philips Cell Phone E GSM 900 User Manual
Philips Headphones HS502 User Manual
Philips Iron GC6440 User Manual
Philips Power Supply 9VPS4A User Manual
Philips Work Light ICS2G9LS120SO User Manual
Pioneer Stereo Receiver VSX D711 User Manual
Plantation Products Headphones 76512 01 User Manual
Professional Series Hot Beverage Maker PS77692 User Manual
Pure Acoustics Speaker QX550 User Manual