Rwegwistewr yo.upr hproildiupctsan.dcgoetmsup/pworteatlcome
47PFL4606H
42PFL4606H
42PFL4506H
42PFL3606H
42PFL3506H
40PFL5606H
37PFL4606H
32PFL5606H
32PFL5406H
32PFL4606H
32PFL3606H
32PFL3506H
32PFL3406H
EN User manual
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Install channels
Automatically install channels
Manually install channels
Rename channels
31
31
32
32
33
33
33
Contents
1 Notice
2
4
Rearrange channels
Test digital reception
Access CAM services
2 Important
7 Connect devices
Back connections
34
34
36
37
38
39
42
3 YourTV
7
7
8
9
TV controls
Side connections
Remote control
Remote control usage
Connect a computer
Use a Conditional Access Module
Use Philips EasyLink
4 Use yourTV
Switch yourTV on
Switch yourTV to standby
Switch yourTV off
Switch channels
10
10
11
11
11
12
13
13
Use a Kensington lock
8 Product information
Supported display resolutions
Multimedia
43
43
43
Watch connected devices
AdjustTV volume
Use teletext
Tuner/Reception/Transmission
Remote control
Power
43
43
43
SupportedTV mounts
D<JQWXYꢃZ[*X;\X>Y;J]ꢃ
44
ꢃ ^^
5 Use more of yourTV
AccessTV menus
14
14
14
Add device to the home menu
9 Troubleshooting
GeneralTV issues
TV channel issues
Picture issues
46
46
46
47
47
47
48
48
Rename devices from the home menu 14
Remove devices from the home menu 15
Change picture and sound settings
Use the universal access menu
Use advanced teletext features
Create and use lists of favourite
channels
Use the Electronic Programme Guide
Display theTV clock
Use timers
15
18
19
Sound issues
HDMI connection issues
Computer connection issues
Contact us
20
21
22
23
23
24
25
10 Index
49
Lock unsuitable content
View Scenea
Change language
Play photos, music and videos on USB
storage devices
26
28
28
30
30
30
Listen to digital radio channels
Update theTV software
ChangeTV preferences
Start aTV demo
Reset theTV to factory settings
EN
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Pixel characteristics
1 Notice
This LCD product has a high number of
colour pixels.Although it has effective pixels of
99.999% or more, black dots or bright points of
light (red, green or blue) may appear constantly
on the screen.This is a structural property of
the display (within common industry standards)
and is not a malfunction.
2011 © Koninklijke Philips Electronics N.V.All
rights reserved.
[*X;\X>Y;J]Zꢃ><*ꢃZW‚ƒ*XYꢃYJꢃX,>]*ꢃ„;Y,JWYꢃ
notice.Trademarks are the property of
Koninklijke Philips Electronics N.V or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
The material in this manual is believed
adequate for the intended use of the system.
If the product, or its individual modules or
procedures, are used for purposes other than
Y,JZ*ꢃZ[*X;\*Qꢃ,*<*;]ꢔꢃXJ]\<?>Y;J]ꢃJ|ꢃY,*;<ꢃ
validity and suitability must be obtained. Philips
warrants that the material itself does not
infringe any United States patents. No further
warranty is expressed or implied.
Compliance with EMF
Koninklijke Philips Electronics N.V. manufactures
and sells many products targeted at consumers
which, like any electronic apparatus, in
general have the ability to emit and receive
electromagnetic signals.
One of Philips’ leading Business Principles is to
take all necessary health and safety measures
for our products, to comply with all applicable
legal requirements and to stay well within
the Electro Magnetic Field (EMF) standards
applicable at the time of producing the
products.
Philips is committed to develop, produce and
market products that cause no adverse health
*||*XYZ}ꢃD,;~;[ZꢃXJ]\<?ZꢃY,>Yꢃ;|ꢃ;YZꢃ[<JQWXYZꢃ><*ꢃ
handled properly for their intended use, they
><*ꢃZ>|*ꢃYJꢃWZ*ꢃ>XXJ<Q;]ꢃYJꢃZX;*]Y;\Xꢃ*€;Q*]X*ꢃ
available today.
Terms of warranty
#ꢃ Risk of injury, damage to TV or void of
warranty! Never attempt to repair the TV
yourself.
#ꢃ Use the TV and accessories only as
intended by the manufacturer.
#ꢃ The caution sign printed on the back of
the TV indicates risk of electric shock.
Never remove the TV cover. Always
contact Philips Customer Support for
service or repairs.
Philips plays an active role in the development
of international EMF and safety standards,
enabling Philips to anticipate further
developments in standardisation for early
integration in its products.
#ꢃ Any operation expressly prohibited in
this manual, or any adjustments and
assembly procedures not recommended
or authorised in this manual shall void the
warranty.
Download from Www.Somanuals.com. All Manuals Search And Download.
Mains fuse (UK only)
Copyright
,;ZꢃŽꢃ;Zꢃ\YY*Qꢃ„;Y,ꢃ>]ꢃ>[[<J€*Qꢃ?JW~Q*Qꢃ
plug. Should it become necessary to replace
the mains fuse, this must be replaced with a
fuse of the same value as indicated on the plug
(example 10A).
Kensington and Micro Saver are registered US
trademarks of ACCO World corporation with
issued registrations and pending applications in
other countries throughout the world.
1 Remove fuse cover and fuse.
2 The replacement fuse must comply with
BS 1362 and have the ASTA approval
mark. If the fuse is lost, contact your
dealer in order to verify the correct type.
3ꢃ *\YꢃY,*ꢃ|WZ*ꢃXJ€*<}
Manufactured under licence from Dolby
Laboratories. Dolby and the double D symbol
are trademarks of Dolby Laboratories.
ˆ‰Š‹ꢔꢃY,*ꢃˆ‰Š‹ꢃ~JJꢃ>]Qꢃˆ;,Œ‰*\];Y;J]ꢃ
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC in
the United States and other countries.
All other registered and unregistered
trademarks are the property of their respective
owners.
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Risk of injury or damage to the TV!
#ꢃ Two people are required to lift and carry
a TV that weighs more than 25 kg or 55
lbs.
#ꢃ When stand mounting the TV, use only
the supplied stand. Secure the stand to
Y,*ꢃŽꢃY;,Y~‘}ꢃD~>X*ꢃY,*ꢃŽꢃJ]ꢃ>ꢃ]>Yꢔꢃ~*€*~ꢃ
surface that can support the combined
weight of the TV and the stand.
#ꢃ When wall mounting the TV, use only a
wall mount that can support the weight of
the TV. Secure the wall mount to a wall
that can support the combined weight of
the TV and wall mount. Koninklijke Philips
Electronics N.V. bears no responsibility
for improper wall mounting that result in
accident, injury or damage.
2 Important
Read and understand all instructions before you
use yourTV. If damage is caused by failure to
follow instructions, the warranty does not apply.
Safety
?ꢎꢅꢆꢈ&„ꢈꢄꢍꢄꢔꢓꢉꢎꢔꢈꢅꢕ&ꢔꢆꢈ&ꢉꢈ\ꢉꢄ†
#ꢃ Never expose the TV to rain or water.
Never place liquid containers, such as
vases, near the TV. If liquids are spilt on
or into the TV, disconnect the TV from
the power outlet immediately. Contact
Philips Consumer Care to have the TV
checked before use.
#ꢃ Parts of this product may be made of
glass. Handle with care to avoid injury
and damage.
#ꢃ Never place the TV, remote control or
‚>YY*<;*Zꢃ]*><ꢃ]>”*Qꢃ]>?*ZꢃJ<ꢃJY,*<ꢃ,*>Yꢃ
sources, including direct sunlight.
Jꢃ[<*€*]YꢃY,*ꢃZ[<*>QꢃJ|ꢃ\<*ꢔꢃ”**[ꢃ
X>]Q~*ZꢃJ<ꢃJY,*<ꢃ]>?*Zꢃ>„>‘ꢃ|<J?ꢃY,*ꢃ
TV, remote control and batteries at all
times.
Risk of injury to children!
Follow these precautions to prevent the
TV from toppling over and causing injury to
children:
#ꢃ Never place the TV on a surface covered
by a cloth or other material that can be
pulled away.
#ꢃ Ensure that no part of the TV hangs over
the edge of the surface.
#ꢃ Never place the TV on tall furniture (such
as a bookcase) without anchoring both
the furniture and TV to the wall or a
suitable support.
#ꢃ Educate children about the dangers of
climbing on furniture to reach the TV.
Risk of swallowing batteries!
#ꢃ Never insert objects into the ventilation
slots or other openings on the TV.
#ꢃ When the TV is swivelled ensure that
no strain is exerted on the power cord.
Strain on the power cord can loosen
connections and cause arcing.
#ꢃ The product/remote control may
contain a coin-type battery, which can be
swallowed. Keep the battery out of reach
of children at all times!
?ꢎꢅꢆꢈ&„ꢈꢅꢕ&ꢉꢓꢈꢔꢎꢉꢔꢋꢎꢓꢈ&ꢉꢈ\ꢉꢄ†
#ꢃ Never expose the remote control or
batteries to rain, water or excessive heat.
#ꢃ Avoid force coming onto power plugs.
Loose power plugs can cause arcing or
\<*}
Risk of overheating!
#ꢃ “*€*<ꢃ;]ZY>~~ꢃY,*ꢃŽꢃ;]ꢃ>ꢃXJ]\]*QꢃZ[>X*}ꢃ
Always leave a space of at least 4 inches
or 10 cm around the TV for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the TV.
Download from Www.Somanuals.com. All Manuals Search And Download.
Risk of damage to the TV!
Screen care
#ꢃ Before you connect the TV to the power
outlet, ensure that the power voltage
matches the value printed on the back
of the TV. Never connect the TV to the
power outlet if the voltage is different.
?ꢎꢅꢆꢈ&„ꢈꢎꢑFꢋꢉ8‡ꢈ\ꢉꢄꢈ&ꢉꢈꢊ&Gꢄꢉꢈꢔ&ꢉꢖꢈꢖꢏꢒꢏ5ꢄ†ꢈ
#ꢃ Never place the TV or any objects on the
power cord.
#ꢃ Avoid stationary images as much as
possible. Stationary images are images
that remain on-screen for extended
periods of time. Examples include:
on-screen menus, black bars and time
displays. If you must use stationary
images, reduce screen contrast and
brightness to avoid screen damage.
#ꢃ Unplug the TV before cleaning.
#ꢃ Clean the TV and frame with a soft,
damp cloth. Never use substances such as
alcohol, chemicals or household cleaners
on the TV.
#ꢃ To easily disconnect the TV power cord
from the power outlet, ensure that you
have full access to the power cord at all
times.
#ꢃ When you disconnect the power cord,
always pull the plug, never the cable.
#ꢃ Disconnect the TV from the power
outlet and antenna before lightning
storms. During lightning storms, never
touch any part of the TV, power cord or
antenna cable.
#ꢃ Risk of damage to the TV screen! Never
touch, push, rub or strike the screen with
any object.
#ꢃ To avoid deformations and colour fading,
wipe off water drops as soon as possible.
Risk of hearing damage!
#ꢃ Avoid using earphones or headphones at
high volumes or for prolonged periods of
time.
Low temperatures
#ꢃ If the TV is transported in temperatures
below 5°C or 41°F, unpack the TV and
wait until the TV temperature matches
room temperature before connecting the
TV to the power outlet.
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Disposal of your old product and
batteries
Environmental efforts
Philips continuously focuses on lowering
the environmental impact of its innovative
consumer products. We aim our efforts
towards environmental improvements
during manufacturing, reduction of harmful
ZW‚ZY>]X*Zꢔꢃ*]*<‘Œ*|\X;*]YꢃWZ*ꢔꢃ*]QŒJ|Œ~;|*ꢃ
instructions and product recycling.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Jꢃ>XX*ZZꢃ*]*<‘Œ*|\X;*]YꢃZ*YY;]Z•ꢃ
1
While you watch TV, press the green
button on the remote control.
2 Select one of the following settings:
#ꢃ [Energy saving]: Picture settings that
conserve the most energy.
When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European Directive
2002/96/EC. Please inform yourself about the
local separate collection system for electrical
and electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
#ꢃ [Mute screen]: If you only want to
listen to audio from the TV, you
can turn off the TV display. Other
functions continue to operate
normally.
#ꢃ [Light sensor]: The built-in ambient
light sensor lowers the brightness of
the TV screen when the surrounding
light darkens.
Correct disposal of your old product helps to
prevent potential negative consequences for
the environment and human health.
#ꢃ [Switch off unused sources]: If you
connect EasyLink-compliant devices,
you can switch them off.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed of with normal household
waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environment and human
health.
Download from Www.Somanuals.com. All Manuals Search And Download.
For xxPFL4xx6
3 YourTV
Congratulations on your purchase, and
„*~XJ?*ꢃYJꢃD,;~;[Z—ꢃJꢃ|W~~‘ꢃ‚*]*\Yꢃ|<J?ꢃY,*ꢃ
support that Philips offers, register yourTV at
TV controls
For xxPFL5xx6
1
2
3
4
a
b
c
+/-: Adjust volume.
(Power): Switch the TV on or off.
(Home): Access the home menu.
d CH +/-: Switch channels.
1
2
3
4
For xxPFL3xx6
1
a
b
+/-: Adjust volume.
2
3
4
(Home): Access the home menu.
c CH +/-: Switch channels.
d Power: Switch the TV on or off.
a
b
+/-: Adjust volume.
(Home): Access the home menu.
c CH +/-: Switch channels.
d
(Power): Switch the TV on or off.
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
f
g
SOURCE
Remote control
#ꢃ Select connected devices.
#ꢃ Mute or restore audio.
1
2
h +/-
#ꢃ Adjust volume.
i 0-9 (Numeric buttons)
#ꢃ Select channels.
17
3
4
j SUBTITLE
16
15
14
#ꢃ Enable or disable subtitles.
k TEXT
#ꢃ Enable or disable teletext.
5
13
l
m
OPTIONS
6
7
12
#ꢃ Access options for the current
activity or selection.
8
#ꢃ Return to the previous menu or exit
a function.
9
n OK
#ꢃ ˜J]\<?ꢃ>]ꢃ*]Y<‘ꢃJ<ꢃZ*~*XY;J]}
10
11
o
(Navigation buttons)
#ꢃ Navigate through menus and select
items.
p
ADJUST
#ꢃ Access the menu to adjust settings.
a
(Standby-On)
#ꢃ Switch the TV on or to standby.
q Colour buttons
#ꢃ Select tasks or options.
b Play buttons
#ꢃ Control video or music.
c
FIND
#ꢃ Access the menu to select a TV
channel list.
d
e
(Home)
#ꢃ Access the home menu.
CH - / CH + (Previous/Next)
#ꢃ Switch channels or navigate through
menu pages, tracks, albums or
folders.
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control usage
When you use the remote control, hold it close
to theTV and point it at the remote control
sensor. Make sure that the line-of-sight between
the remote control andTV is not blocked by
furniture, walls or other objects.
For xxPFL5xx6 and xxPFL4xx6
~5m
~30˚
For xxPFL3xx6
~5m
~30˚
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
For xxPFL4xx6
4 Use yourTV
This section helps you perform basicTV
operations.
Switch yourTV on
#ꢃ Press the power switch on the TV.
» There is a short delay before theTV
responds.
For xxPFL5xx6
For xxPFL3xx6
If theTV is in standby
#ꢃ Press (Standby-On) on the remote
control.
Download from Www.Somanuals.com. All Manuals Search And Download.
Switch yourTV to standby
Switch channels
#ꢃ Press (Standby-On) on the remote
control again.
#ꢃ Press CH+ or CH- on the remote
control.
» The remote control sensor on theTV
switches to red.
Switch yourTV off
#ꢃ Press the power switch on the TV again.
» The remote control sensor on theTV
switches off.
#ꢃ Press CH +/- on the TV.
» For xxPFL5xx6, theTV no longer
consumes energy.
For xxPFL5xx6 and xxPFL4xx6
» For xxPFL4XX6 and xxPFL3xx6,
though theTV consumes very little
power when in standby, energy
continues to be consumed.When not
in use for an extended period of time,
disconnect theTV power cable from
the power outlet or turn off the power
switch.
Note
# If you cannot locate your remote control and
want to switch on the TV from standby, press
CH+/- on the TV.
For xxPFL3xx6
EN 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Other ways to switch channels
Watch connected devices
#ꢃ Enter a channel number using the
Numeric buttons.
Note
#ꢃ Press
(BACK) on the remote control
# Before you select a device as a source, switch
to return to the previous channel.
the device on.
Note
# When you use a favourite list, you can only
select those channels in the list (see ‘Create
and use lists of favourite channels’ on page 20).
Select a device from the source list
1 Press
SOURCE.
View channel preview
You can view a preview of all available
channels with the channel grid.
#ꢃ Press FIND.
» The channel grid appears.
» To preview a channel, select it.
» The source list appears.
» To watch a channel, select it, then press
2 Press
to select a device.
OK.
3 Press OKꢃYJꢃXJ]\<?ꢃ‘JW<ꢃX,J;X*}
» TheTV switches to the selected
device.
Download from Www.Somanuals.com. All Manuals Search And Download.
AdjustTV volume
Use teletext
#ꢃ Press +/- on the remote control.
1 Press TEXT.
#ꢃ Press
+/- on the TV.
» The main index page appears.
2 Select a page with one of the following:
#ꢃ Press the Numeric buttons to enter
a page number.
For xxPFL5xx6 and xxPFL4xx6
#ꢃ Press or to view the next or
previous page.
#ꢃ Press the Colour buttons to select a
colour coded item.
#ꢃ Press
(BACK) to return to a
previously viewed page.
3 Press TEXT to exit teletext.
Note
# For UK users only: Some digital TV channels
offer dedicated digital text services (for
example, BBC1).
For xxPFL3xx6
To mute or unmute sound
#ꢃ Press to mute the sound.
#ꢃ Press again to restore the sound.
EN 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Add device to the home
5 Use more of
menu
yourTV
After you connect a device, add it to the home
menu.
1 Press
.
AccessTV menus
2 Select [Add new device].
Menus help you to install channels, change
picture and sound settings and access other
features.
3 Follow the onscreen instructions to add
the device to the home menu.
» The device is displayed in the home
menu.
1 Press
.
The menu screen appears.
4 To watch the device, switch it on, then
select it in the home menu.
5
You can also select the device with the
source button (see ‘Select a device from
the source list’ on page 12).
Rename devices from the
home menu
After you add a new device to the home menu,
you can rename it to your preference.
2 Select one of the following, then press
OK.
#ꢃ [Watch TV]: If a source other than
antenna is selected, switch back to
the antenna source
#ꢃ [Add new device]: Add new devices
to the home menu.
Note
# The device name can be up to 16 characters
long.
1 Press
.
#ꢃ [Setup]: Access menus to change
picture, sound and other settings.
#ꢃ [Programme guide]: Access the
electronic programme guide.
#ꢃ [Scenea]: Switch on Scenea
wallpaper.
2 Select a device to rename.
3 Press
OPTIONS.
» The options menu appears.
4 Select [Rename device], then press OK.
» A text input box appears.
#ꢃ [Help]: Access the TV tour.
3 Press to exit.
5 Select characters each character, then
press OKꢃYJꢃXJ]\<?}
#ꢃ Press [Aa] to change an uppercase
letter to a lowercase letter and vice
versa.
6
When the new name is complete, select
[Done], then press OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
Use smart picture
›Z*ꢃZ?><Yꢃ[;XYW<*ꢃYJꢃ>[[~‘ꢃ[<*ŒQ*\]*Qꢃ
picture settings.
Remove devices from the
home menu
If a device is no longer connected to theTV,
remove it from the home menu.
1 Press ADJUST.
2 Select [Smart picture], then press OK.
1 Press
.
3 Select one of the following settings, then
2 Select a device to remove.
press OK.
3 Press
OPTIONS.
#ꢃ [Personal]: Apply your customised
picture settings
4 Select [Remove device], then press OK.
#ꢃ [Vivid]: Rich and dynamic settings,
ideal for daytime.
#ꢃ [Natural]: Natural picture settings.
#ꢃ [Cinema]: Ideal settings for movies.
#ꢃ [Game]: Ideal settings for games.
#ꢃ [Energy saving]: Settings that
conserve the most energy.
#ꢃ [Standard]: Default settings that suit
most environments and types of
video.
#ꢃ [Photo]: Ideal settings for photos.
#ꢃ [Custom]: Customise and store your
personal picture settings. Select
[Personal] to apply these settings.
5 Select [Remove], then press OK.
» The selected device is removed from
the home menu.
Change picture and sound
settings
Change picture and sound settings to suit your
[<*|*<*]X*Z}ꢃœJWꢃX>]ꢃ>[[~‘ꢃ[<*ŒQ*\]*QꢃZ*YY;]Zꢃ
or change settings manually.
Note
# While you watch TV or external devices, press
ADJUST, then select [Smart picture] or
[Smart sound] for quick access to picture and
sound settings.
Use settings assistant
Use the settings assistant to guide you through
the picture and sound settings.
1 Press
.
2 Select [Setup] > [Quick picture and
sound settings], then press OK.
3 Select [Continue], then press OK.
» The [Settings assistant] menu appears.
4 Follow the onscreen instructions to
choose your preferred picture settings.
EN 15
Download from Www.Somanuals.com. All Manuals Search And Download.
#ꢃ [MPEG artifact reduction]: Smooth
out transitions on digital pictures.
You can switch this feature on or off.
#ꢃ [Colour enhancement]: Make
colours more vivid and improve the
details in bright colours. You can
Manually adjust picture settings
1 Press
.
2 Select [Setup] > [TV settings] >
[Picture], then press OK.
3 Select one of the following settings, then
switch this feature on or off.
press OK.
#ꢃ [Gamma]: Adjust the midtone
intensity in the picture. Black and
white are not affected.
#ꢃ [Smart picture]•ꢃžXX*ZZꢃ[<*Q*\]*QꢃZ?><Yꢃ
picture settings.
#ꢃ [Reset]: Reset to factory default settings.
#ꢃ [Contrast]: Adjust the intensity of
backlight areas, while the video contents
are kept unchanged.
#ꢃ [Brightness]: Adjust the intensity and
details of dark areas.
#ꢃ [Colour]: Adjust colour saturation.
#ꢃ [Hue]: Compensate for colour variations.
#ꢃ [Sharpness]: Adjust sharpness in the
image.
#ꢃ [Noise reduction]: Filter and reduce
noise in an image.
#ꢃ [PC mode]: Adjust the picture when a PC
is connected to the TV via HDMI or DVI.
#ꢃ [Light sensor]: Adjust settings dynamically
based on the current lighting conditions.
#ꢃ [Picture format]: Change the picture
format.
#ꢃ [Screen edges]: Adjust the viewing area.
(when set to maximum, you may see
noise or the rough edge of an image).
#ꢃ [Picture shift]: Adjust the picture position
for all picture formats except for [Auto
zoom] and [Wide screen].
#ꢃ [Tint]: Adjust the colour balance in an
image.
#ꢃ [Custom tint]: Customise tint setting.
(Only available if [Tint] > [Custom] is
selected)
Change picture format
1 Press ADJUST.
#ꢃ [Digital Crystal Clear]/[Pixel Plus]/[Pixel
Plus HD]: Fine-tune each pixel to match
surrounding pixels. This setting produces
>ꢃ‚<;~~;>]Yꢔꢃ,;,ŒQ*\];Y;J]ꢃ;?>*}
#ꢃ [HD Natural Motion]: (For Pixel Plus
HD) Minimise juddering effects and
enhance picture smoothness.
#ꢃ [100Hz Clear LCD]: (For Pixel Plus
HD) Reduce motion blurring and
make picture more clear.
2 Select [Picture format], then press OK.
3 Select a picture format, then press OK.
Summary of picture formats
The following picture settings can be
XJ]\W<*Q}
Note
# Depending on the format of the picture
#ꢃ [Advance sharpness]: Enable
superior picture sharpness.
source, some picture settings are not available.
#ꢃ [Dynamic contrast]: Enhance
contrast. [Medium] setting is
recommended.
#ꢃ [Dynamic backlight]: Adjust
brightness of the TV backlight to
match lighting conditions.
Download from Www.Somanuals.com. All Manuals Search And Download.
Use smart sound
›Z*ꢃZ?><YꢃZJW]QꢃYJꢃ>[[~‘ꢃ[<*ŒQ*\]*QꢃZJW]Qꢃ
settings.
[Auto format]: For
selected models. (Not for
PC mode.) Automatically
display the suitable picture
format. If not, widescreen
is applied.
1 Press ADJUST.
2 Select [Smart sound], then press OK.
˜™ꢋꢓ&ꢈ\ꢍꢍš: : For selected
models. Adjust the
3 Select one of the following settings, then
press OK.
[;XYW<*ꢃYJꢃ\~~ꢃY,*ꢃZX<**]ꢃ
(subtitles remain visible).
Recommended for
minimal screen distortion
but not for HD or PC.
[Auto zoom]: For selected
models. Enlarge the
#ꢃ [Personal]: Apply the settings that
were customised in the sound menu.
#ꢃ [Standard]: Settings that suit most
environments and types of audio.
#ꢃ [News]: Ideal settings for spoken
audio, such as news.
#ꢃ [Cinema]: Ideal settings for movies.
#ꢃ [Game]: Ideal settings for games.
#ꢃ [Drama]: Ideal settings for drama
programmes.
[;XYW<*ꢃYJꢃ\~~ꢃY,*ꢃZX<**]}ꢃ
Recommended for
minimal screen distortion
but not for HD or PC.
[Super zoom]: (Not
for HD and PC mode.)
Remove the black bars on
the side of 4:3 broadcasts.
There is minimal
#ꢃ [Sports]: Ideal settings for sports
programmes.
distortion.
[4:3]: Show the classic 4:3
format.
[Movie expand 16:9]:
(Not for HD and PC
mode.) Scale 4:3 format
to 16:9.
[Wide screen]: Scale 4:3
format to 16:9.
[Unscaled]: For HD
and PC mode only,
and in selected models
only. Allow maximum
sharpness. Some
distortion may be present
due to the broadcaster’s
systems. Set your PC
resolution to wide screen
mode for best results.
EN 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Manually adjust sound settings
Use the universal access
menu
1 Press
.
2 Select [Setup] > [TV settings] > [Sound],
You can activate the universal access menu
QW<;]ꢃY,*ꢃ\<ZYꢃ;]ZY>~~>Y;J]}ꢃŸ]X*ꢃ*]>‚~*Qꢔꢃ‘JWꢃ
can quickly access the visually impaired and
hearing impaired menus when watching TV or
external devices.
then press OK.
» The [Sound] menu appears.
3 Select one of the following settings, then
press OK.
#ꢃ [Smart sound]•ꢃžXX*ZZꢃ[<*Q*\]*QꢃZ?><Yꢃ
sound settings.
1
While you watch TV, press
OPTIONS.
» TheTV options menu appears.
#ꢃ [Reset]: Reset to factory default settings.
#ꢃ [Clear sound]: Enhance the sound clarity.
#ꢃ [Bass]: Adjust the bass level.
#ꢃ [Treble]: Adjust the treble level.
#ꢃ [Surround]: Switch on spatial sound.
#ꢃ [Incredible Surround]: (For selected
models) Enhanced spatial sound for
increased surround effect.
#ꢃ [Headphone volume]: (For models with
headphones) Adjust headphone volume.
#ꢃ [Auto volume levelling]: Automatically
reduce sudden volume changes, for
example when switching channels.
#ꢃ [Balance]: Adjust the balance of the right
and left speakers.
2 Select [Universal access], then press OK.
3 Select one of the following options, then
press OK.
#ꢃ [Hearing impaired]: Enable or disable
hearing impaired subtitles.
#ꢃ [Visually impaired]: Some digital TV
channels broadcast special audio adapted
for people who are visually impaired.
The normal audio is mixed with extra
commentary. Use the colour buttons to
select the options:
#ꢃ Red ([Off]): Turn off visually
impaired audio.
#ꢃ Green ([Speakers]): Hear visually
impaired audio from speakers only
#ꢃ Yellow ([Headphone]): Hear visually
impaired audio from headphones
only.
#ꢃ Blue ([Speaker + headphone]): Hear
visually impaired audio from both
speakers and headphone.
#ꢃ [Digital output format]: Select the type
of digital audio output through digital
audio output connector.
#ꢃ [PCM]: Convert non-PCM audio
type to PCM format.
#ꢃ [Multichannel]: Output audio to the
home theatre.
#ꢃ [Mixed volume]: Adjust the volume of
visually impaired audio.
#ꢃ [Key beep]: Switch on audio feedback
when buttons are pressed on the remote
control or TV.
Tip
# Press the colour buttons on the remote
control to enter the options.
Download from Www.Somanuals.com. All Manuals Search And Download.
Select teletext subpages
A teletext page can contain several subpages.
Subpages are displayed next to the main page
number.
Use advanced teletext
features
Access the teletext options menu
Access the teletext features through the
teletext options menu.
1 Press TEXT.
» The teletext screen appears.
2 Press or to select a teletext page.
1 Press TEXT.
» The teletext screen appears.
3 Press or to enter a subpage.
2 Press
OPTIONS.
» The teletext options menu appears.
SelectT.O.P. teletext broadcasts
3 Select one of the following options, then
Jump from one subject to another without
entering page numbers with Table Of Pages
(T.O.P.) teletext broadcasts. T.O.P. teletext
broadcasts are available on selected TV
channels.
press OK.
#ꢃ [Freeze page] / [Unfreeze page]:
Freeze/unfreeze the current page.
#ꢃ [Dual screen] / [Full Screen]: Switch
between full screen and dual screen
teletext.
#ꢃ [T.O.P. overview]: Switch on Table
of Pages teletext broadcasts
#ꢃ [Enlarge] / [Normal view]: Switch
between enlarged and normal view
of teletext pages.
#ꢃ [Reveal]: Hide or reveal hidden
information on a page, such as
solutions to riddles or puzzles.
#ꢃ [Cycle subpage]: If subpages are
available, automatically display each
subpage in sequence.
1 Press TEXT.
» The teletext screen appears.
2 Press
OPTIONS.
3 Select [T.O.P. overview], then press OK.
» TheT.O.P. overview appears.
4 Select a subject.
5 Press OK to view the page.
UseTeletext 2.5
Teletext 2.5 offers more colours and better
graphics than normal teletext. If Teletext 2.5
is broadcast by a channel, it is switched on by
default.
#ꢃ [Languages]: Select a language for
teletext.
1 Press
.
2 Select [Setup] > [TV settings] >
[Preferences] > [Teletext 2.5].
3 Select [On] or [Off], then press OK to
XJ]\<?}
EN 19
Download from Www.Somanuals.com. All Manuals Search And Download.
View all channels
You can exit the favourites list, and view all
installed channels.
Create and use lists of
favourite channels
You can create a list of your preferredTV
X,>]]*~ZꢃZJꢃY,>Yꢃ‘JWꢃX>]ꢃ\]QꢃY,JZ*ꢃX,>]]*~Zꢃ
easily.
1
While you watch TV, press FIND.
» The channel matrix menu is displayed.
2 Press
OPTIONS.
3 Select [Select list] > [All], then press
View only the list of favourite
channels
OK.
» All channels are displayed in the
channel grid.
1
While you watch TV, press FIND.
» The channel matrix menu is displayed.
Note
2 Press
OPTIONS.
3 Select [Select list] > [Favourites], then
# All favourite channels are marked by an
asterisk when you view the channel grid.
press OK.
» Only channels in the favourites list
appear in the channel grid.
Manage the favourites list
Note
1
While you watch TV, press FIND.
» The channel matrix menu appears.
# The favourites channel grid is empty until you
add channels into the favourites list.
2 Press
OPTIONS.
3 Select [Select list] > [All], then press
OK.
4 Press
OPTIONS.
5 Select [Mark as favourite] or [Unmark as
favourite], then press OK.
» The channel is added or removed from
the favourite list.
Note
# All favourite channels are marked by an
asterisk in the channel grid.
Download from Www.Somanuals.com. All Manuals Search And Download.
Change programme guide options
You can set or clear reminders, change the
day, and access other useful options in the
programme guide options menu.
Use the Electronic
Programme Guide
The programme guide is an on-screen guide
available for digital channels. It allows you to:
#ꢃ View a list of digital programmes being
broadcast
#ꢃ View upcoming programmes
#ꢃ Group programmes by genre
#ꢃ Set reminders when programmes start
#ꢃ Setup preferred programme guide
channels
1 Press
.
2 Select [Programme guide], then press
OK.
3 Press
OPTIONS.
» The programme guide menu appears.
4 Select one of the following options, then
press OK.
#ꢃ [Set reminder] / [Clear reminders]:
Set or clear programme reminders.
#ꢃ [Change day]: Set the programme
guide day.
#ꢃ [More info]: Display programme
information.
Switch on EPG
1 Press
.
2 Select [Programme guide], then
pressOK.
» The programme guide appears
displaying information about the
scheduled programmes.
#ꢃ [Search by genre]: Search TV
programmes by genre.
#ꢃ [Scheduled reminders]: List
programme reminders. Only
available for upcoming programmes.
#ꢃ [Acquire EPG data]: Update the
latest programme guide information.
Note
# Programme guide data is available only in
selected countries and can take some time to
load.
EN 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Change the clock mode
Display theTV clock
1 Press
.
You can display a clock on theTV screen.The
clock displays the current time using time data
received from yourTV service operator.
2 Select [Setup] > [TV settings] >
[Preferences] > [Clock] > [Auto clock].
3 Select [Automatic] or [Manual], then
press OK.
Set theTV clock manually
In some countries, you need to set TV clock
manually.
Change the time zone
1 Press
.
Note
2 Select [Setup] > [TV settings] >
# This option is only available if you select [Auto
clock] > [Automatic] (in countries with clock
transmission data).
[Preferences] > [Clock].
3 Select [Auto clock], then press OK.
4 Select [Manual], then press OK.
1 Press
.
5 Select [Time] or [Date], then press OK.
2 Select [Setup] > [TV settings] >
6 Press the Navigation buttons to set the
[Preferences] > [Clock] > [Time zone].
time or date.
3 Select your time zone.
7 Select [Done], then press OK.
4 Press OKꢃYJꢃXJ]\<?}
8 Press to exit.
Use daylight saving
Note
# If your selected country supports digital
broadcast, the clock displays the time data
from your TV service operator as priority.
Note
# This option is only available if you select [Auto
clock mode] > [Manual].
Display theTV clock
1 Press
.
2 Select [Setup] > [TV settings] >
[Preferences] > [Clock] > [Daylight
saving], then press OK.
1
While you watch TV, press
OPTIONS.
» The options menu is displayed.
3 Select [Standard time] or [Daylight
2 Select [Clock].
saving time], then press OK.
3 Press OK.
Note
# To disable the clock, repeat the procedure.
Download from Www.Somanuals.com. All Manuals Search And Download.
Use timers
Lock unsuitable content
You can set timers to switch theTV to standby
You can prevent your children from watching
certain programmes or channels by locking the
TV controls.
>Yꢃ>ꢃZ[*X;\*QꢃY;?*}
Tip
# Set the TV clock before you use timers.
Set or change code
1 Press
.
2 Select [Setup] > [Channel settings] >
Automatically switch theTV to
[Child lock].
standby (sleep timer)
Sleep timer switches the TV to standby after a
[<*ŒQ*\]*QꢃQW<>Y;J]}
3 Select [Set code] or [Change code].
» The [Set code] / [Change code] menu
appears.
4 Enter your code using the Numeric
Tip
buttons.
# You can switch off your TV earlier or reset the
» Follow the on-screen instructions to
create or change your PIN code.
sleep timer during the countdown.
1 Press
.
Tip
2 Select [Setup] > [TV settings] >
# If you forget your code, enter ‘8888’ to
[Preferences] > [Sleep timer].
» The [Sleep timer] menu appears.
override any existing codes.
3 Select a value between zero and 180
minutes.
» If you select zero, the sleep timer
switches off.
4 Press OK to switch on the sleep timer.
» TheTV switches to standby after the
Z[*X;\*QꢃY;?*}
EN 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Lock or unlock one or more channels
View Scenea
1 Press > [Setup] > [Channel settings] >
You can display a default picture as the
wallpaper on yourTV.You can also load another
picture as the wallpaper.
If the sleeptimer is off, the wallpaper is displayed
for 240 minutes. Otherwise, it is displayed for
the duration of the sleeptimer.
[Child lock] > [Channel lock].
» A list of channels is displayed.
2 Select the channel that you want to lock
or unlock, then press OK.
» ,*ꢃ\<ZYꢃY;?*ꢃ‘JWꢃ~JX”ꢃJ<ꢃW]~JX”ꢃ>ꢃ
channel, you are prompted to enter
your PIN code.
Switch on Scenea
3 Enter your code and press OK.
» If the channel is locked, a lock icon is
displayed.
1 Press
.
2 Select [Scenea], then press OK.
» If no picture has been set, the default
picture is displayed.
4 Repeat the process to lock or unlock
more channels.
» If a customised Scenea picture is
loaded, that picture is displayed (see
‘Customise the Scenea picture’ on
page 24).
5 To activate the locks, switch the TV on
and off.
» When you switch channels with CH
- or CH +, the locked channels are
skipped.
Customise the Scenea picture
You can load another picture as the wallpaper.
» When you access the locked channels
from the channel grid, you are
prompted to enter your PIN code.
Note
Set parental ratings
Some digital broadcasters rate their
programmes according to age. You can set
your TV to display only programmes with age
ratings lower than your child’s age.
# When you load a new Scenea picture, it
overrides the current Scenea picture.
# To use another picture as the wallpaper, you
need a USB storage device that contains a
picture that is less than 1 MB in size.
1 Load a picture smaller than 1MB in size
1 Press
.
into a USB storage device.
2 Select [Setup] > [Channel settings] >
2 Connect the USB storage device to the
[Child lock] > [Parental rating].
» A code setup screen appears.
TV.
3 Press
.
3 Enter your code using Numeric buttons.
4 Select [Browse USB], then press OK.
» The rating menu appears.
5 Select a picture, then press
4 Select an age rating, then press OK.
OPTIONS.
5 Press to exit.
6 Select [Set as Scenea], then press OK.
» žꢃXJ]\<?>Y;J]ꢃ?*ZZ>*ꢃ;ZꢃQ;Z[~>‘*Q}ꢃ
7 Press OKꢃYJꢃXJ]\<?ꢔꢃY,*]ꢃ[<*ZZꢃ>]‘ꢃ
button to exit Scenea.
Download from Www.Somanuals.com. All Manuals Search And Download.
Show or hide subtitles
Change language
1
While you watch TV, press SUBTITLE.
Depending on your broadcaster, you can change
the audio language, subtitle language, or both,
for aTV channel.
Multiple audio languages, subtitles, or both, are
broadcast through teletext or DVB-T digital
broadcasts. Dual sound broadcasts:With digital
broadcasts, you can select a subtitle language.
2 Select one of the following, then press
OK.
#ꢃ [Subtitles on]: Always display
subtitles.
#ꢃ [Subtitles off]: Never display
subtitles.
#ꢃ [On during mute]: When audio is
muted, display subtitles.
Change menu language
Note
1 Press
.
# Repeat this procedure to enable subtitles on
each analogue channel.
2 Select [Setup] > [TV settings] >
[Preferences] > [Menu language], then
press OK.
# Select [Subtitles] > [Subtitles off] to disable
subtitles.
3 Select a language, then press OK.
Select a subtitle language in digital
channels
Change audio language
You can choose an audio language if it is
available from your broadcaster. For digital
channels, multiple languages may be available.
For analogue channels, two languages may be
available.
Note
# When you select a subtitle language in a digital
TV channel as described below, the preferred
subtitle language set in the installation menu is
temporarily overruled.
1
While you watch TV, press
OPTIONS.
1
While you watch TV, press
2 For digital channels, select [Audio
language], select the language, then press
OK.
OPTIONS.
2 Select [Subtitle language], then press
OK.
3 For analogue channels, select [Dual I-II],
select either language, then press OK.
3 Select a subtitle language.
4 Press OKꢃYJꢃXJ]\<?}
EN 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Change slide show settings
Play photos, music and videos
on USB storage devices
1
While you view a slide show, press
OPTIONS.
» The slide show options menu is
displayed.
Caution
# Philips is not responsible if the USB storage
device is not supported, nor is it responsible
for damage or loss of data from the device.
2 Select one of the following, then press
OK.
#ꢃ [Start/Stop slideshow]: Start or stop
slideshow.
#ꢃ [Slideshow transitions]: Set the
transition from one picture to the
next.
#ꢃ [Slideshow frequency]: Select the
display time for each photo.
#ꢃ [Rotate image]: Rotate photo.
#ꢃ [Show info]: Display the picture
name, date, size and next picture in
the slide show.
Connect a USB storage device to play photos,
music or videos stored on it.
1 Switch on the TV.
2 Connect the USB device to the USB port
on the side of your TV.
3 Press
.
4 Select [Browse USB], then press OK.
» The USB browser appears.
3 To return, press
.
View photos
1 In the USB browser, select [Picture], then
Note
press OK.
# [Rotate image] and [Show info] appear only
2 Select a photo or a photo album, then
press OK to view the photo enlarged to
\~~ꢃY,*ꢃŽꢃZX<**]}
when the slideshow is paused.
#ꢃ To view the next or previous photo,
Listen to music
press
.
1 In the USB browser, select [Music], then
3 To return, press
.
press OK.
2 Select a music track or album, then press
View a slide show of your photos
OK to play.
1
When a full screen image of a photo is
displayed, press OK.
» A slide show begins from the selected
photo.
3 To control play, press the play buttons:
#ꢃ
#ꢃ
#ꢃ
to play.
to pause.
or to play the previous or next
track.
or
#ꢃ Press the following buttons to control
#ꢃ
to search forward or
play:
backward.
#ꢃ
#ꢃ
#ꢃ
to play.
#ꢃ
to stop.
to pause.
or to play the previous or next
photo.
to stop.
#ꢃ
#ꢃ To return, press
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Change music settings
View a slideshow with music
#ꢃ While you play music, press
You can view a picture slide show with
background music.
OPTIONS to access one of the
following settings, then press OK.
#ꢃ [Stop playback]: Stop music play.
#ꢃ [Repeat]: Play a song once or
repeatedly.
#ꢃ ˜Eꢕꢋ„]ꢄꢈ&ꢑš / ˜Eꢕꢋ„]ꢄꢈ&„„š: Play songs
in sequence or at random.
1 Select an album of songs.
2 Press OK.
3 Press
to return to the USB content
browser.
4 Select an album of pictures.
#ꢃ [Show info]•ꢃ‰;Z[~>‘ꢃY,*ꢃ\~*ꢃ]>?*}
#ꢃ [Sound]: Change sound settings.
5 Press OK.
» The slideshow begins.
6 To exit, press
.
Watch video
1 In the USB browser, select [Video], then
Disconnect a USB storage device
press OK.
2 Press OK to play.
Caution
3 To control play, press the play buttons:
# Follow this procedure to avoid damage to your
USB storage device.
Change video settings
1 Press
to exit the USB browser.
2ꢃ ¡>;Yꢃ|J<ꢃ\€*ꢃZ*XJ]QZꢔꢃY,*]ꢃQ;ZXJ]]*XYꢃ
#ꢃ While you play video, press
OPTIONS to access one of the
following settings, then press OK.
#ꢃ [Stop playback]: Stop video play.
#ꢃ [Repeat]: Play once or repeatedly.
#ꢃ [Subtitles]: If available, select
whether the subtitles are displayed.
#ꢃ ˜Eꢕꢋ„]ꢄꢈ&ꢑš / ˜Eꢕꢋ„]ꢄꢈ&„„š: Play in
sequence or at random.
the USB storage device.
#ꢃ [Show info]•ꢃ‰;Z[~>‘ꢃY,*ꢃ\~*ꢃ]>?*}
#ꢃ [TV speakers]: Play audio from
TV speakers or from a connected
EasyLink device (see ‘Set TV
speakers to EasyLink mode’ on page
40).
EN 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Download the latest software version
Listen to digital radio
channels
1 Connect a USB storage device.
2 Press
.
1 Press FIND.
3 Select [Setup] > [Software update
» The channel matrix menu is displayed.
assistant].
2 Press
OPTIONS, then select [Select
4ꢃ ¢J~~J„ꢃY,*ꢃ;]ZY<WXY;J]ZꢃYJꢃ~J>Qꢃ>ꢃ\~*ꢃJ]YJꢃ
list] > [Radio].
your USB storage device.
» The radio channel grid appears.
5 Connect the USB storage device to your
XJ?[WY*<ꢔꢃY,*]ꢃQJW‚~*ŒX~;X”ꢃY,*ꢃ\~*}ꢃ
» A Web page is launched.
3 Select a radio channel and press OK to
listen.
6 Follow the instructions in the Web page.
#ꢃ If the current software version
matches the latest software update
\~*ꢔꢃ‘JWꢃQJꢃ]JYꢃ]**QꢃYJꢃW[Q>Y*ꢃ‘JW<ꢃ
TV software.
Update theTV software
Philips continuously tries to improve its
#ꢃ If the current software version is
smaller than the latest software
W[Q>Y*ꢃ\~*ꢔꢃQJ„]~J>QꢃY,*ꢃ~>Y*ZYꢃ
ZJ|Y„><*ꢃW[Q>Y*ꢃ\~*ꢃYJꢃY,*ꢃ<JJYꢃ
directory of your USB device.
Disconnect the USB storage device from
the computer.
products and we recommend that you update
theTV software when updates are available.
Update software
You can update the TV software in one of the
following ways:
7
A with a USB storage device,
8 Connect your USB storage device to the
B automatically through digital broadcasts,
TV.
or
9 Select [Setup] > [Software update] >
C manually through digital broadcasts.
10 [PLroescsalOuKpdtaoteusp]d. ate the TV software.
Update with a USB device
To update with a USB storage device, you
need:
#ꢃ A computer with Internet access
#ꢃ A USB storage device.
11 Follow the on-screen instructions to
12 cToomepxliet,teprtehses update.
.
Note
1 Press
.
# The TV restarts after the software update is
complete.
2 Select [Setup] > [Software update] >
[Current software inf].
» The current software information is
displayed.
3
Write down the software version
number.
4 To exit, press
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Update theTV software
Update at any time through digital
broadcast
You can update your TV manually through
digital broadcasts.
1 Connect your USB storage device to the
TV.
2 Press
.
1 Press
.
3 Select [Setup] > [Software update] >
[Local updates] > [USB].
2 Select [Setup] > [Software update] >
[Check on major updates].
4 Press OK to update the TV software
manually.
3 Follow the on-screen instructions to start
the update.
5 Follow the on-screen instructions to
» TheTV restarts after the software
update is complete.
complete the update.
Note
# The TV restarts after the software update is
complete.
Update when prompted through
digital broadcast
If you receive digital broadcasts (DVB-T),
your TV can automatically receive software
updates.
1 Press
.
2 Select [Setup] > [Software update] >
[Announcement].
3 If a message appears to prompt you
to update your software, follow the
instructions to start the update.
» TheTV restarts after the software
update is complete.
4 If you do not want to update the
software, select [Setup] > [Software
update] > [Clear announcement], then
press OK.
Note
# If you skip the update, you can update it
manually later (see ‘Update at any time
through digital broadcast’ on page 29).
EN 29
Download from Www.Somanuals.com. All Manuals Search And Download.
ChangeTV preferences
Start aTV demo
Use the preferences menu to customise your
TV settings.
You can use demonstrations to better
understand the features of your TV. Some
demos are not available on certain models.
1 Press
.
A1vailWablheiledeymouoswaartechdiTspVl,apyeredsisn the menu list.
.
2 Select [Setup] > [TV settings] >
[Preferences].
2 Select [Setup] > [Watch demo], OK.
3 Select one of the following, then press
OK.
3 Select a demo and press OK to view it.
#ꢃ [Menu language]: Select a menu
language.
4 To exit, press
.
#ꢃ [Sleep timer]: Switch the TV to
ZY>]Q‚‘ꢃ>|Y*<ꢃ>ꢃ[<*ŒQ*\]*QꢃQW<>Y;J]}
#ꢃ [Location]: Optimise TV settings for
your location - home or shop.
#ꢃ [E-sticker]: (For shop mode only)
Switch the e-sticker on or off.
#ꢃ [Volume bar]: Display the volume
bar when you adjust the volume.
#ꢃ [Auto switch off]: To conserve
energy, set the TV to switch off
automatically after a period of
inactivity.
#ꢃ [Channel information size]: Change
the type of information that is
displayed when you switch channels.
#ꢃ [Universal access]: Enable or disable
the universal access menu.
Reset theTV to factory
settings
You can restore the default picture and sound
settings of yourTV.The channel installation
settings remain the same.
1 Press
.
2 Select [Setup] > [TV settings] >
[Factory settings], then press OK.
3 If you are prompted to enter a code,
enter the child-lock code (see ‘Set or
change code’ on page 23).
» žꢃXJ]\<?>Y;J]ꢃ?*ZZ>*ꢃ;ZꢃQ;Z[~>‘*Q}
4 Press OKꢃYJꢃXJ]\<?}
#ꢃ [Key beep]: Enable audio feedback
when you press buttons on the
remote control or TV.
#ꢃ [Audio out delay]: Automatically
sync the image on your TV to the
audio from a connected Home
Theatre.
#ꢃ [TV position]: Apply the best
settings for your TV based on how it
is mounted.
#ꢃ [Teletext 2.5]: Enable or disable
Teletext 2.5. (For digital TV)
#ꢃ [Clock]: Display or remove the time
from the TV, and set clock options.
Download from Www.Somanuals.com. All Manuals Search And Download.
Update the channel list
6 Install channels
You can enable automatic update of channels
when your TV is in standby mode. The
channels stored in your TV are updated every
morning according to the channel information
in the broadcast.
,*ꢃ\<ZYꢃY;?*ꢃ‘JWꢃZ*YꢃW[ꢃ‘JW<ꢃŽꢔꢃ‘JWꢃ><*ꢃ
prompted to select a menu language and to
installTV and digital radio channels (if available).
ž|Y*<„><QZꢔꢃ‘JWꢃX>]ꢃ<*Œ;]ZY>~~ꢃ>]Qꢃ\]*ꢃYW]*ꢃ
channels.
1 Press
.
2 Select [Setup] > [Channel settings] >
[Channel installation] > [Automatic
channel update].
Automatically install channels
3 Select [On] to enable the automatic
update or select [Off] to disable it.
You can search and store channels automatically.
4 To return, press
.
Step 1 Select your menu language
1 Press
.
2 Select [Setup] > [TV settings] >
[Preferences] > [Menu language], then
press OK.
3 Select a language, then press OK.
Step 2 Select your country
Select the country where you are installing the
TV. The available channels for the country are
installed on the TV.
1 Press
.
2 Select [Setup] > [Search for channels],
then press OK.
3 Select [Reinstall channels], then press
OK.
» The country menu appears.
4 Select your country, then press OK.
» The channel installation guide begins.
5 Select [Start], then press OK.
» All available channels are stored.
6 To exit, press OK.
EN 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3 Fine-tune analogue channels
Manually install channels
1 Press
.
This section describes how to search and store
analogueTV channels manually.
2 Select [Setup] > [Channel settings] >
[Channel installation] > [Analogue:
manual install] > [Fine-tune], then press
OK.
Step 1 Select your system
3 Press
ꢃYJꢃ\]*ŒYW]*ꢃY,*ꢃX,>]]*~}
Note
# Skip this step if your system settings are
correct.
Rename channels
1 Press
.
You can rename channels.The name appears
w1henWyohuileseyloeuctwthaetcchhTanVn,epl.ress FIND.
2 Select [Setup] > [Channel settings] >
[Channel installation] > [Analogue:
Manual antenna installation] > [System],
then press OK.
» The channel matrix menu is displayed.
2 Select the channel to rename.
3 Select the correct system for your
3 Press
OPTIONS.
country or region, then press OK.
» The channel options menu appears.
4 Select [Rename channel], then press OK.
Step 2 Search and store newTV
channels
» A text input box appears.
5 Press
to select each character,
1 Press
.
then press OK.
2 Select [Setup] > [Channel settings] >
[Channel installation] > [Analogue:
Manual antenna installation] > *[Find
channel], then press OK.
6
When the name is complete, select
[Done], then press OK.
Tip
#ꢃ If you know the three-digit frequency
of the channel, enter it.
#ꢃ To search, select [Search], then press
OK.
# Press [Aa] to change an uppercase letter to a
lowercase letter and vice versa.
3
When the channel is found, select
[Done], then press OK.
#ꢃ To store the channel as a new
number, select [Store as new
channel], then press OK.
#ꢃ To store the channel as the
previously selected channel, select
[Store current channel], then press
OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
Rearrange channels
Access CAM services
After you install channels, you can rearrange the
order in which they appear.
1 Insert and activate the CAM (see ‘Insert
and activate a CAM’ on page 38).
1
While you watch TV, press FIND.
2 Press
OPTIONS.
» The channel matrix menu is displayed.
3 Select [Common interface].
» Applications provided by the digitalTV
service operator are displayed.
2 Press
OPTIONS.
» The channel options menu appears.
3 Select [Reorder], then press OK.
Note
4 Select the channel to rearrange, then
# This menu option is available only if the CAM
press OK.
» The selected channel is highlighted.
is inserted and activated correctly.
5
Move the highlighted channel to its new
location, then press OK.
6 Press
OPTIONS.
7 Select [Done reordering], then press
OK.
Test digital reception
You can check the quality and signal strength
of digital channels.This allows you to reposition
and test your antenna or satellite dish.
1 Press
.
2 Select [Setup] > [Channel settings]
> [Channel installation] > [Digital:
Reception test] , then press OK.
3 Enter the frequency to test, then press
OK.
4 Select [Search], then press OK.
5
When the channel is found, select
[Store], then press OK.
Note
# If the signal quality and strength is poor,
reposition the aerial or satellite dish and retest.
# If you still have problems with the reception
of your digital broadcast, contact a specialised
installer.
EN 33
Download from Www.Somanuals.com. All Manuals Search And Download.
b EXT 1 (RGB and CVBS)
7 Connect devices
Analogue audio and video input from
analogue or digital devices such as DVD
players or game consoles.
This section describes how to connect devices
with different connectors. For the location of
these connectors on yourTV, see the Quick
Start Guide. More examples of connections
with other devices are provided in the Quick
Start Guide.
Note
# You can use different types of connectors to
connect a device to your TV.
Tip
# After connection, for easy access to your
device, add it to the home menu: press , then
select [Add new device].
c DIGITAL AUDIO OUT
Digital audio output to home theatres
and other digital audio systems.
Back connections
SPDIF OUT
a TV ANTENNA (For selected models)
Signal input from an antenna, cable or
satellite.
TV ANTENNA
d SERV. U (For selected models)
For use by service personnel only.
Download from Www.Somanuals.com. All Manuals Search And Download.
e PC IN (VGA and AUDIO IN)
g HDMI 2 (For selected models)
Digital audio and video input from high-
Q*\];Y;J]ꢃQ;;Y>~ꢃQ*€;X*ZꢃZWX,ꢃ>Zꢃ§~WŒ<>‘ꢃ
players.
Audio and video input from a computer.
VGA
Connections via DVI or VGA require an
additional audio cable (see ‘Connect a
computer’ on page 37).
VGA
AUDIO IN
LEFT/RIGHT
VGA/DVI
h EXT 2 (Y Pb Pr and AUDIO L/R) (For
selected models)
f HDMI 1 ARC (For selected models)
Digital audio and video input from high-
Q*\];Y;J]ꢃQ;;Y>~ꢃQ*€;X*ZꢃZWX,ꢃ>Zꢃ§~WŒ<>‘ꢃ
players. Also outputs TV audio to other
EasyLink-compliant devices, such as home
theatre systems.
Analogue audio and video input from
analogue or digital devices such as DVD
players or game consoles.
Connections via DVI or VGA require an
additional audio cable (see ‘Connect a
computer’ on page 37).
EN 35
Download from Www.Somanuals.com. All Manuals Search And Download.
d HDMI
Side connections
Digital audio and video input from high-
Q*\];Y;J]ꢃQ;;Y>~ꢃQ*€;X*ZꢃZWX,ꢃ>Zꢃ§~WŒ<>‘ꢃ
players.
a AUDIO L/R (For selected models)
Audio input from analogue devices
connected to VIDEO.
e
(Headphone)
Stereo audio output to headphones or
earphones.
b VIDEO (For selected models)
Composite video input from analogue
devices such as VCRs.
f COMMON INTERFACE
Slot for a Conditional Access Module
(CAM).
c USB
Data input from USB storage devices.
Download from Www.Somanuals.com. All Manuals Search And Download.
#ꢃ HDMI cable and HDMI-DVI adaptor
Connect a computer
AUDIO IN
LEFT/RIGHT
VGA/DVI
Before you connect a computer to theTV
#ꢃ Set the screen refresh rate on your
computer to 60Hz.
#ꢃ Select a supported screen resolution on
your computer.
Connect a computer with one of the
following connectors:
DVI
Note
# Connections via DVI or VGA require an
additional audio cable.
#ꢃ HDMI cable
#ꢃ VGA cable
AUDIO IN
LEFT/RIGHT
VGA/DVI
VGA
#ꢃ DVI-HDMI cable
AUDIO IN
LEFT/RIGHT
VGA/DVI
DVI
EN 37
Download from Www.Somanuals.com. All Manuals Search And Download.
Access CAM services
Use a Conditional Access
Module
1 Insert and activate the CAM (see ‘Insert
and activate a CAM’ on page 38).
A Conditional Access Module (CAM) is
provided by digitalTV service operators to
decode digitalTV channels.
2 Press
OPTIONS.
3 Select [Common interface].
» Applications provided by the digitalTV
service operator are displayed.
Note
# Refer to the documentation from your service
operator on how to insert a smart card into
the Conditional Access Module.
Note
# This menu option is available only if the CAM
is inserted and activated correctly.
Insert and activate a CAM
Caution
# Be sure to follow the instructions described
below. Wrong insertion of a CAM may
damage both the CAM and your TV.
1 Switch off the TV and disconnect it from
the power outlet.
2 Following the directions printed on the
CAM, gently insert the CAM into the
COMMON INTERFACE at the side of
the TV.
3 Push the CAM in as far as it will go.
4 Reconnect the TV to the power outlet.
5 Turn on the TV and wait for the CAM
to be activated. This may take several
minutes. Do not remove the CAM
from the slot when in use — this action
deactivates digital services.
Download from Www.Somanuals.com. All Manuals Search And Download.
Use one-touch play
Use Philips EasyLink
1 After you switch on EasyLink, press play
Get the most out of your HDMI-Consumer
Electronic Control (CEC) compliant devices
with Philips EasyLink enhanced control
features. If your HDMI-CEC compliant devices
are connected through HDMI, you can control
them at the same time with your TV remote
control.
on your device.
» TheTV automatically switches to the
correct source.
Use one-touch play control
If you connect multiple HDMI-CEC devices
that support this setting, all such devices
respond to the play control buttons on this
TV remote control.
To enable Philips EasyLink, you need to:
#ꢃ Connect at least two HDMI-CEC
compliant devices through HDMI
#ꢃ ˜J]\W<*ꢃ*>X,ꢃˆ‰Š‹Œ˜ª˜ꢃXJ?[~;>]Yꢃ
device properly
Caution
#ꢃ Switch on EasyLink
# This is an advanced setting. Devices that do
not support this setting will not respond to the
TV remote control.
Note
# The EasyLink-compliant device must be
switched on and selected as the source.
# Philips does not guarantee 100%
1 Press
.
2 Select [Setup] > [TV settings] >
interoperability with all HDMI CEC devices.
[EasyLink] > [EasyLink remote control].
3 Select [On] or [Off], then press OK.
Switch on or off EasyLink
Use one-touch standby
When you press on the TV remote control,
the TV and all HDMI-CEC compliant devices
switch to standby mode.
When you play an HDMI-CEC compliant
device, the TV switches on from standby, and
switches to the correct source.
Note
1 Press (Standby-On) on the TV’s or
# If you do not intend to use Philips EasyLink,
device’s remote control.
switch it off.
» TheTV and all connected HDMI
devices switch to standby.
1 Press
.
2 Select [Setup] > [TV settings] >
[EasyLink] > [EasyLink].
3 Select [On] or [Off], then press OK.
EN 39
Download from Www.Somanuals.com. All Manuals Search And Download.
Select speaker output with Adjust menu
If [EasyLink] or [EasyLink autostart] are
selected, access the adjust menu to switch the
TV audio.
SetTV speakers to EasyLink mode
If you connect an HDMI-CEC compliant
device that includes speakers, you can choose
to hear the TV from those speakers instead of
the TV speakers.
When you play content from an EasyLink
compliant home theatre, if you want to
mute the TV speakers automatically, turn on
EasyLink mode.
If the connected device is HDMI Audio Return
Channel (ARC) compliant, and you connect
the device through an HDMI ARC connector,
you can output TV audio through the HDMI
cable. You do not need an additional audio
cable.
1
While you watch TV, press ADJUST.
2 Select [Speaker], then press OK.
3 Select one of the following, then press
OK:
#ꢃ [TV]: On by default. Stream TV
audio through TV and the connected
HDMI-CEC audio device until the
connected device switches to system
audio control. TV audio is then
streamed through the connected
device.
#ꢃ ˜™ꢒꢊꢍꢎ\ꢄꢉš: Stream audio through
the connected HDMI-CEC device.
If system audio mode is not enabled
on the device, audio continue to
stream from the TV speakers. If
[EasyLink autostart] was enabled,
the TV prompts the connected
device to switch to system audio
mode.
1
Make sure that the EasyLink-compliant
device is connected through an HDMI
ARC connector (see ‘Back connections’
on page 34).
2 Select [Setup] > [TV settings] >
[EasyLink] > [TV speakers].
3 Select one of the following, then press
OK.
#ꢃ [Off]: Switch off TV speakers.
#ꢃ [On]: Switch on TV speakers.
#ꢃ [EasyLink]: Stream TV audio
through the connected HDMI-CEC
device. Switch the TV audio to the
connected HDMI-CEC audio device
through the adjust menu.
Maximise display for subtitled video
Some subtitles can create a separate subtitle
bar under the video, which limits the video
display area. After you switch on auto subtitle
shift, the subtitles display over the video
image, which maximises the video display area.
#ꢃ [EasyLink autostart]: Turn off TV
speakers automatically and streams
TV audio to the connected HDMI-
CEC audio device.
1 Press
.
2 Select [Setup] > [TV settings] >
[EasyLink] > [Auto subtitle shift] > [On],
then press OK.
Note
# To mute the TV speakers, select [TV
speakers] > [Off].
Download from Www.Somanuals.com. All Manuals Search And Download.
Retain picture quality
Switch other devices to standby
If your TV picture quality is affected by the
picture-processing features of other devices,
switch on Pixel Plus Link.
If you connect an EasyLink- compliant device
that has speakers, you can get the most out
of those speakers if you listen to TV audio
through them.
If the connected device is HDMI-ARC
compliant, and you connect the device
through an HDMI ARC connector, you can
output TV audio through the HDMI cable.
You do not need an additional audio cable.
1 Press
.
2 Select [Setup] > [TV settings] >
[EasyLink] > [Pixel Plus Link] > [On],
then press OK.
HearTV audio through another
device
If you connect an EasyLink- compliant device
that has speakers, you can get the most out
of those speakers if you listen to TV audio
through them.
1 Press the green button.
2 Select [Switch off unused sources], then
press OK.
» All connected EasyLink devices are
switched to standby.
If the connected device is HDMI-ARC
compliant, and you connect the device
through an HDMI ARC connector, you can
output TV audio through the HDMI cable.
You will not need an additional audio cable.
1
Make sure that the EasyLink-compliant
device is connected through an HDMI
ARC connector (see ‘Back connections’
on page 34).
2 Press
.
3 Select [Setup] > [TV settings] >
[EasyLink] > [HDMI1 - audio out], then
press OK.
4 Select one of the following, then press
OK.
#ꢃ [On]: Hear the TV audio through
the connected EasyLink device. You
cannot hear the TV audio through
the TV speakers or through devices
connected through the digital audio
out connector.
#ꢃ [Off]: Hear the TV audio through
the TV speakers, or through a device
connected through the digital audio
out connector.
5 Control playback with the TV remote
control play buttons.
EN 41
Download from Www.Somanuals.com. All Manuals Search And Download.
Use a Kensington lock
There is a Kensington security slot at the back
of theTV. Prevent theft by looping a Kensington
lock between the slot and a permanent object,
such as a heavy table.
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia
8 Product
information
#ꢀ ꢁꢂꢃꢃꢄꢅꢆꢇꢈꢀꢉꢆꢄꢅꢊꢋꢇꢀꢈꢇꢌꢍꢎꢇꢏꢀꢐꢁꢑꢀꢒꢓꢔꢕꢖꢀ
ꢗꢘꢙꢀꢄꢅꢀꢗꢘꢙꢀꢚꢛꢀꢐꢁꢑꢀꢉꢆꢄꢅꢊꢋꢇꢀꢈꢇꢌꢍꢎꢇꢉꢀꢊꢅꢇꢀ
ꢉꢂꢃꢃꢄꢅꢆꢇꢈꢜꢀ
#ꢀ ꢁꢂꢃꢃꢄꢅꢆꢇꢈꢀꢝꢂꢕꢆꢍꢝꢇꢈꢍꢊꢀ\ꢕꢇꢀꢞꢄꢅꢝꢊꢆꢉꢏ
#ꢀ ꢟꢝꢊꢋꢇꢉꢏꢀꢠꢡꢢꢣ
ꢡꢅꢄꢈꢂꢎꢆꢀꢍꢔꢞꢄꢅꢝꢊꢆꢍꢄꢔꢀꢍꢉꢀꢉꢂꢷꣁꢇꢎꢆꢀꢆꢄꢀꢎꢮꢊꢔꢋꢇꢀ
ꢽꢍꢆꢮꢄꢂꢆꢀꢔꢄꢆꢍꢎꢇꢪꢀꢗꢄꢅꢀꢈꢇꢆꢊꢍꢕꢇꢈꢀꢃꢅꢄꢈꢂꢎꢆꢀ
ꢍꢔꢞꢄꢅꢝꢊꢆꢍꢄꢔꢨꢀꢋꢄꢀꢆꢄꢀꢽꢽꢽꢪꢃꢮꢍꢕꢍꢃꢉꢪꢎꢄꢝꢦꢉꢂꢃꢃꢄꢅꢆꢪ
#ꢀ ꢘꢂꢈꢍꢄꢏꢀꢤꢡꢚ
#ꢀ ꢥꢍꢈꢇꢄꢏꢀꢤꢡꢢꢣꢀꢛꢦꢤꢡꢢꢣꢀꢧꢨꢀꢩꢪꢛꢫꢧ
Supported display resolutions
Tuner/Reception/
Transmission
Computer formats
#ꢀ ꢼꢇꢉꢄꢕꢂꢆꢍꢄꢔꢀꢲꢀꢅꢇꢞꢅꢇꢉꢮꢀꢅꢊꢆꢇꢏ
#ꢀ ꢫꢧꢺꢀꢯꢀꢧꢴꢺꢀꢲꢀꢫꢺꢀꢩꢾ
#ꢀ ꢴꢺꢺꢀꢯꢀꢫꢺꢺꢀꢲꢀꢫꢺꢀꢩꢾ
#ꢀ ꢻꢺꢛꢧꢀꢯꢀꢬꢫꢴꢀꢲꢀꢫꢺꢩꢾ
#ꢀ ꢻꢛꢴꢺꢀꢯꢀꢬꢛꢺꢀꢲꢫꢺꢩꢾ
#ꢀ ꢻꢛꢴꢺꢀꢯꢀꢬꢫꢴꢀꢲꢫꢺꢩꢾ
#ꢀ ꢻꢛꢴꢺꢀꢯꢀꢻꢺꢛꢧꢀꢲꢀꢫꢺꢀꢩꢾ
#ꢀ ꢻꢚꢫꢺꢀꢯꢀꢬꢫꢴꢀꢲꢀꢫꢺꢩꢾ
#ꢀ ꢻꢫꢴꢺꢀꢯꢀꢻꢺꢭꢺꢀꢲꢀꢫꢺꢩꢾꢀꢒꢗꢄꢅꢀꢗꢂꢕꢕꢀꢩꢱꢀ
ꢄꢔꢕꢖꢜ
#ꢀ ꢘꢔꢆꢇꢔꢔꢊꢀꢍꢔꢃꢂꢆꢏꢀꢬꢭꢄꢮꢝꢀꢎꢄꢊꢯꢍꢊꢕꢀꢒꢟꢢꢰꢬꢭꢜ
#ꢀ ꢱꢥꢑꢏꢀꢱꢥꢑꢀꢙꢇꢅꢅꢇꢉꢆꢅꢍꢊꢕꢨꢀꢱꢥꢑꢲꢙꢀꢤꢡꢢꢣꢧꢨꢀ
ꢱꢥꢑꢲꢰ
#ꢀ ꢙꢥꢀꢉꢖꢉꢆꢇꢝꢏꢀꢱꢥꢑꢀꢰꢓꢗꢱꢤꢀꢛꢳꢦꢴꢳꢵꢀꢡꢘꢶꢀꢟꢨꢀ
ꢑꢦꢣꢨꢀꢱꢦꢳꢵꢀꢁꢢꢰꢘꢤꢀꢑꢦꢣꢨꢀꢱꢦꢳꢨꢀꢶꢦꢶSꢀ
#ꢀ ꢥꢍꢈꢇꢄꢀꢃꢕꢊꢖꢷꢊꢎꢸꢏꢀꢹꢙꢁꢰꢨꢀꢁꢢꢰꢘꢤꢨꢀꢡꢘꢶ
#ꢀ ꢙꢂꢔꢇꢅꢀꢑꢊꢔꢈꢉꢏꢀꢩꢖꢃꢇꢅꢷꢊꢔꢈꢨꢀꢁꢲꢎꢮꢊꢔꢔꢇꢕꢨꢀꢐꢩꢗꢨꢀ
ꢥꢩꢗ
#ꢀ ꢻꣂꢛꢺꢀꢯꢀꢻꢺꢴꢺꢀꢲꢀꢫꢺꢀꢩꢾꢀꢒꢗꢄꢅꢀꢗꢂꢕꢕꢀꢩꢱꢀ
ꢄꢔꢕꢖꢜ
Remote control
Video formats
#ꢀ ꢼꢇꢉꢄꢕꢂꢆꢍꢄꢔꢀꢲꢀꢅꢇꢞꢅꢇꢉꢮꢀꢅꢊꢆꢇꢏ
#ꢀ ꢧꢴꢺꢍꢀꢲꢀꢫꢺꢀꢩꢾ
#ꢀ ꢙꢖꢃꢇꢏꢀꢡꢗꢺꢻꢢꢻꢻꢑ
#ꢀ ꢑꢊꢆꢆꢇꢅꢍꢇꢉꢏꢀꢛꢀꢯꢀꢘꢘꢘꢀꢒꢶꢼꢺꢚꢀꢆꢖꢃꢇꢜ
#ꢀ ꢧꢴꢺꢃꢀꢲꢀꢫꢺꢀꢩꢾ
#ꢀ ꢭꢬꢫꢍꢀꢲꢀꢭꢺꢩꢾ
#ꢀ ꢭꢬꢫꢃꢀꢲꢀꢭꢺꢀꢩꢾ
Power
#ꢀ ꢬꢛꢺꢃꢀꢲꢀꢭꢺꢀꢩꢾꢨꢀꢫꢺꢀꢩꢾ
#ꢀ ꢻꢺꢴꢺꢍꢀꢲꢀꢭꢺꢀꢩꢾꢨꢀꢫꢺꢀꢩꢾ
#ꢀ ꢻꢺꢴꢺꢃꢀꢲꢀꢛꢧꢩꢾꢨꢀꢛꢭꢩꢾꢨꢀꢚꢺꢩꢾꢨꢀꢭꢺꢩꢾꢨꢀ
ꢫꢺꢩꢾꢪ
#ꢀ ꢤꢊꢍꢔꢉꢀꢃꢄꢽꢇꢅꢏꢀꢛꢛꢺꢲꢛꢧꢺꢥꢨꢀꢭꢺꢩꢾꢲꢫꢺꢩꢾ
#ꢀ ꢁꢆꢊꢔꢈꢷꢖꢀꢃꢄꢽꢇꢅꢏꢀ
#ꢀ ꢗꢄꢅꢀꢯꢯꢡꢗꢶꢯꢯꢭꢯꢯꢫꢏꢀꢿꢺꢪꢻꢭꢀꣀ
#ꢀ ꢗꢄꢅꢀꢯꢯꢡꢗꢶꢯꢯꢧꢯꢯꢫꢀꢊꢔꢈꢀꢯꢯꢡꢗꢶꢯꢯꢚꢯꢯꢫꢏꢀ
ꢿꢀꢺꢪꢚꢀꣀ
#ꢀ ꢘꢝꢷꢍꢇꢔꢆꢀꢆꢇꢝꢃꢇꢅꢊꢆꢂꢅꢇꢏꢀꢭꢀꢆꢄꢀꢧꢺꢀꢈꢇꢋꢅꢇꢇꢉꢀ
ꢰꢇꢕꢉꢍꢂꢉ
#ꢀ ꢗꢄꢅꢀꢃꢄꢽꢇꢅꢀꢎꢄꢔꢉꢂꢝꢃꢆꢍꢄꢔꢨꢀꢉꢇꢇꢀꢆꢮꢇꢀꢃꢅꢄꢈꢂꢎꢆꢀ
ꢉꢃꢇꢎꢍ\ꢎꢊꢆꢍꢄꢔꢉꢀꢊꢆꢀꢽꢽꢽꢪꢃꢮꢍꢕꢍꢃꢉꢪꢎꢄꢝꢦ
ꢉꢂꢃꢃꢄꢅꢆꢪ
EN 43
Download from Www.Somanuals.com. All Manuals Search And Download.
SupportedTV mounts
ꢀꢁꢂꢃꢄꢅꢆꢇꢈꢉꢊꢅꢋ\ꢅꢌꢆꢋꢂꢍ
ꢙꢄꢀꢝꢄꢂꢔꢆꢀꢆꢮꢇꢀꢙꢥꢨꢀꢃꢂꢅꢎꢮꢊꢉꢇꢀꢊꢀꢡꢮꢍꢕꢍꢃꢉꢀꢙꢥꢀꢝꢄꢂꢔꢆꢀ
ꢄꢅꢀꢊꢀꢎꢄꢝꢃꢊꢆꢍꢷꢕꢇꢀꢙꢥꢀꢝꢄꢂꢔꢆꢪꢀ
ꢱꢇꢉꢍꢋꢔꢀꢊꢔꢈꢀꢉꢃꢇꢎꢍ\ꢎꢊꢆꢍꢄꢔꢉꢀꢊꢅꢇꢀꢉꢂꢷꣁꢇꢎꢆꢀꢆꢄꢀꢎꢮꢊꢔꢋꢇꢀ
ꢽꢍꢆꢮꢄꢂꢆꢀꢔꢄꢆꢍꢎꢇꢪ
Warning
47PFL4606H
#ꢀ ꢗꢄꢕꢕꢄꢽꢀꢊꢕꢕꢀꢍꢔꢉꢆꢅꢂꢎꢆꢍꢄꢔꢉꢀꢃꢅꢄꢌꢍꢈꢇꢈꢀꢽꢍꢆꢮꢀꢆꢮꢇꢀꢙꢥꢀ
ꢝꢄꢂꢔꢆꢪꢀꢳꢄꢔꢍꢔꢸꢕꢍꣁꢸꢇꢀꢡꢮꢍꢕꢍꢃꢉꢀꢢꢕꢇꢎꢆꢅꢄꢔꢍꢎꢉꢀꢹꢪꢥꢪꢀ
ꢷꢇꢊꢅꢉꢀꢔꢄꢀꢅꢇꢉꢃꢄꢔꢉꢍꢷꢍꢕꢍꢆꢖꢀꢞꢄꢅꢀꢍꢝꢃꢅꢄꢃꢇꢅꢀꢙꢥꢀ
ꢝꢄꢂꢔꢆꢍꢔꢋꢀꢆꢮꢊꢆꢀꢅꢇꢉꢂꢕꢆꢉꢀꢍꢔꢀꢊꢎꢎꢍꢈꢇꢔꢆꢨꢀꢍꢔꣁꢂꢅꢖꢀꢄꢅꢀ
ꢈꢊꢝꢊꢋꢇꢪ
#ꢀ ꣀꢍꢆꢮꢄꢂꢆꢀꢙꢥꢀꢉꢆꢊꢔꢈ
#ꢀ ꢱꢍꢝꢇꢔꢉꢍꢄꢔꢀꢒꣀꢯꢩꢯꢱꢜꢏꢀꢻꢻꢛꣂꢪꢴꢀꢯꢀꢫꣂꢬꢪꢴꢀ
ꢯꢀꢴꢚꢀꢒꢝꢝꢜ
#ꢀ ꣀꢇꢍꢋꢮꢆꢏꢀꢻꢬꢪꢭꢀꢸꢋ
#ꢀ ꣀꢍꢆꢮꢀꢙꢥꢀꢉꢆꢊꢔꢈ
ꢑꢇꢞꢄꢅꢇꢀꢖꢄꢂꢀꢝꢄꢂꢔꢆꢨꢀꢃꢇꢅꢞꢄꢅꢝꢀꢆꢮꢇꢉꢇꢀꢉꢆꢇꢃꢉꢏꢀ
#ꢀ ꢱꢍꢝꢇꢔꢉꢍꢄꢔꢀꢒꣀꢯꢩꢯꢱꢜꢏꢀꢻꢻꢛꣂꢪꢴꢀꢯꢀꢬꢧꢭꢪꢫꢀ
ꢯꢀꢛꢫꢴꢀꢒꢝꢝꢜ
#ꢀ ꣀꢇꢍꢋꢮꢆꢏꢀꢛꢺꢪꣂꢀꢸꢋ
1ꢀ ꢙꢄꢀꢃꢅꢇꢌꢇꢔꢆꢀꢈꢊꢝꢊꢋꢇꢀꢆꢄꢀꢎꢊꢷꢕꢇꢉꢀꢊꢔꢈꢀ
ꢎꢄꢔꢔꢇꢎꢆꢄꢅꢉꢨꢀꢕꢇꢊꢌꢇꢀꢊꢀꢎꢕꢇꢊꢅꢊꢔꢎꢇꢀꢄꢞꢀꢊꢆꢀꢕꢇꢊꢉꢆꢀ
ꢛꢪꢛꢀꢍꢔꢎꢮꢇꢉꢀꢄꢅꢀꢭꢪꢭꢎꢝꢀꢞꢅꢄꢝꢀꢆꢮꢇꢀꢷꢊꢎꢸꢀꢄꢞꢀꢆꢮꢇꢀ
ꢙꢥꢪ
42PFL4606H
#ꢀ ꣀꢍꢆꢮꢄꢂꢆꢀꢙꢥꢀꢉꢆꢊꢔꢈ
#ꢀ ꢱꢍꢝꢇꢔꢉꢍꢄꢔꢀꢒꣀꢯꢩꢯꢱꢜꢏꢀꢻꢺꢻꢴꢪꢭꢀꢯꢀ
ꢫꢚꢭꢪꢻꢀꢯꢀꢴꢚꢀꢒꢝꢝꢜ
2ꢀ ꢗꢄꢅꢀꢉꢇꢕꢇꢎꢆꢇꢈꢀꢝꢄꢈꢇꢕꢉꢨꢀꢅꢇꢝꢄꢌꢇꢀꢆꢮꢇꢀꢽꢊꢕꢕꢀ
ꢝꢄꢂꢔꢆꢀꢃꢕꢂꢋꢉꢀꢞꢅꢄꢝꢀꢆꢮꢇꢀꢷꢊꢎꢸꢀꢄꢞꢀꢆꢮꢇꢀꢙꢥꢪꢀ
#ꢀ ꣀꢇꢍꢋꢮꢆꢏꢀꢻꢻꢪꢬꢀꢸꢋ
#ꢀ ꣀꢍꢆꢮꢀꢙꢥꢀꢉꢆꢊꢔꢈ
3ꢀ ꢤꢊꢸꢇꢀꢉꢂꢅꢇꢀꢆꢮꢊꢆꢀꢖꢄꢂꢅꢀꢝꢄꢂꢔꢆꢍꢔꢋꢀꢷꢄꢕꢆꢉꢀ
ꢞꢄꢕꢕꢄꢽꢀꢆꢮꢇꢉꢇꢀꢉꢃꢇꢎꢍ\ꢎꢊꢆꢍꢄꢔꢉꢏ
#ꢀ ꢱꢍꢝꢇꢔꢉꢍꢄꢔꢀꢒꣀꢯꢩꢯꢱꢜꢏꢀꢻꢺꢻꢴꢪꢭꢀꢯꢀꢫꢴꢚꢀ
ꢯꢀꢛꢚꢫꢪꢧꢀꢒꢝꢝꢜ
#ꢀ ꣀꢇꢍꢋꢮꢆꢏꢀꢻꢧꢪꢛꢀꢸꢋ
TV screen Required Required mounting
size
(inches)
ꢧꢬ
pitch
(mm)
bolts
42PFL3606H/42PFL3506H
#ꢀ ꣀꢍꢆꢮꢄꢂꢆꢀꢙꢥꢀꢉꢆꢊꢔꢈ
#ꢀ ꢱꢍꢝꢇꢔꢉꢍꢄꢔꢀꢒꣀꢯꢩꢯꢱꢜꢏꢀꢻꢺꢻꢴꢪꢭꢀꢯꢀ
ꢫꢚꢭꢪꢴꢀꢯꢀꢴꢚꢀꢒꢝꢝꢜ
#ꢀ ꣀꢇꢍꢋꢮꢆꢏꢀꢻꢻꢪꢬꢀꢸꢋ
#ꢀ ꣀꢍꢆꢮꢀꢙꢥꢀꢉꢆꢊꢔꢈ
ꢧꢺꢺꢀꢯꢀꢚꢺꢺ ꢧꢀꢯꢀꢤꢴꢀꢒꢻꢺꢀꢝꢝꢜ
ꢚꢺꢺꢀꢯꢀꢛꢺꢺ ꢧꢀꢯꢀꢤꢫꢀꢒꢻꢺꢀꢝꢝꢜ
ꢧꢺꢺꢀꢯꢀꢧꢺꢺ ꢧꢀꢯꢀꢤꢫꢀꢒꢻꢻꢦꢻꢛꢀꢝꢝꢜ
ꢚꢺꢺꢀꢯꢀꢛꢺꢺ ꢧꢀꢯꢀꢤꢫꢀꢒꢻꢺꢀꢝꢝꢜ
ꢛꢺꢺꢀꢯꢀꢛꢺꢺ ꢧꢀꢯꢀꢤꢫꢀꢒꢻꢺꢀꢝꢝꢜ
ꢧꢛ
ꢧꢺ
ꢚꢬ
ꢚꢛ
#ꢀ ꢱꢍꢝꢇꢔꢉꢍꢄꢔꢀꢒꣀꢯꢩꢯꢱꢜꢏꢀꢻꢺꢻꢴꢪꢭꢀꢯꢀꢫꢴꢚꢀ
ꢯꢀꢛꢚꢫꢪꢧꢀꢒꢝꢝꢜ
#ꢀ ꣀꢇꢍꢋꢮꢆꢏꢀꢻꢧꢪꢛꢀꢸꢋ
40PFL5606H
#ꢀ ꣀꢍꢆꢮꢄꢂꢆꢀꢙꢥꢀꢉꢆꢊꢔꢈ
#ꢀ ꢱꢍꢝꢇꢔꢉꢍꢄꢔꢀꢒꣀꢯꢩꢯꢱꢜꢏꢀꣂꢧꢫꢀꢯꢀꢭꢬꢬꢪꢭꢀꢯꢀ
ꢧꢺꢀꢒꢝꢝꢜ
#ꢀ ꣀꢇꢍꢋꢮꢆꢏꢀꢻꢛꢪꢚꢀꢸꢋ
#ꢀ ꣀꢍꢆꢮꢀꢙꢥꢀꢉꢆꢊꢔꢈ
#ꢀ ꢱꢍꢝꢇꢔꢉꢍꢄꢔꢀꢒꣀꢯꢩꢯꢱꢜꢏꢀꣂꢧꢫꢀꢯꢀꢫꢚꢻꢀꢯꢀ
ꢛꣂꢭꢀꢒꢝꢝꢜ
#ꢀ ꣀꢇꢍꢋꢮꢆꢏꢀꢻꢭꢀꢸꢋ
Download from Www.Somanuals.com. All Manuals Search And Download.
37PFL4606H
#ꢀ ꣀꢍꢆꢮꢄꢂꢆꢀꢙꢥꢀꢉꢆꢊꢔꢈ
#ꢀ ꢱꢍꢝꢇꢔꢉꢍꢄꢔꢀꢒꣀꢯꢩꢯꢱꢜꢏꢀꣂꢻꢛꢪꢚꢀꢯꢀꢭꢬꢬꢪꢻꢀ
ꢯꢀꢴꢧꢪꢻꢀꢒꢝꢝꢜ
#ꢀ ꣀꢇꢍꢋꢮꢆꢏꢀꢻꢺꢪꢚꢀꢸꢋ
#ꢀ ꣀꢍꢆꢮꢀꢙꢥꢀꢉꢆꢊꢔꢈ
#ꢀ ꢱꢍꢝꢇꢔꢉꢍꢄꢔꢀꢒꣀꢯꢩꢯꢱꢜꢏꢀꣂꢻꢛꢪꢚꢀꢯꢀꢫꢛꢭꢪꢛꢀ
ꢯꢀꢛꢚꢫꢪꢧꢀꢒꢝꢝꢜ
#ꢀ ꣀꢇꢍꢋꢮꢆꢏꢀꢻꢛꢪꢴꢀꢸꢋ
32PFL5x06H
#ꢀ ꣀꢍꢆꢮꢄꢂꢆꢀꢙꢥꢀꢉꢆꢊꢔꢈ
#ꢀ ꢱꢍꢝꢇꢔꢉꢍꢄꢔꢀꢒꣀꢯꢩꢯꢱꢜꢏꢀꢬꢫꢻꢀꢯꢀꢧꢬꢚꢀꢯꢀ
ꢚꣂꢪꣂꢀꢒꢝꢝꢜ
#ꢀ ꣀꢇꢍꢋꢮꢆꢏꢀꢬꢪꢛꢀꢸꢋ
#ꢀ ꣀꢍꢆꢮꢀꢙꢥꢀꢉꢆꢊꢔꢈ
#ꢀ ꢱꢍꢝꢇꢔꢉꢍꢄꢔꢀꢒꣀꢯꢩꢯꢱꢜꢏꢀꢬꢫꢻꢀꢯꢀꢭꢛꢭꢪꢭꢀꢯꢀ
ꢛꢛꢻꢀꢒꢝꢝꢜ
#ꢀ ꣀꢇꢍꢋꢮꢆꢏꢀꢴꢪꣂꢀꢸꢋ
32PFL4606H
#ꢀ ꣀꢍꢆꢮꢄꢂꢆꢀꢙꢥꢀꢉꢆꢊꢔꢈ
#ꢀ ꢱꢍꢝꢇꢔꢉꢍꢄꢔꢀꢒꣀꢯꢩꢯꢱꢜꢏꢀꢬꣂꢭꢪꢫꢀꢯꢀꢭꢻꢺꢪꢫꢀ
ꢯꢀꣂꢚꢪꢻꢀꢒꢝꢝꢜ
#ꢀ ꣀꢇꢍꢋꢮꢆꢏꢀꢴꢪꢛꢀꢸꢋ
#ꢀ ꣀꢍꢆꢮꢀꢙꢥꢀꢉꢆꢊꢔꢈ
#ꢀ ꢱꢍꢝꢇꢔꢉꢍꢄꢔꢀꢒꣀꢯꢩꢯꢱꢜꢏꢀꢬꣂꢭꢪꢫꢀꢯꢀꢭꢭꢬꢪꢫꢀ
ꢯꢀꢛꢛꢻꢪꢧꢀꢒꢝꢝꢜ
#ꢀ ꣀꢇꢍꢋꢮꢆꢏꢀꣂꢪꢴꢀꢸꢋ
32PFL3606H/32PFL3506H
#ꢀ ꣀꢍꢆꢮꢄꢂꢆꢀꢙꢥꢀꢉꢆꢊꢔꢈ
#ꢀ ꢱꢍꢝꢇꢔꢉꢍꢄꢔꢀꢒꣀꢯꢩꢯꢱꢜꢏꢀꢬꣂꢭꢪꢫꢀꢯꢀꢭꢺꢴꢪꢧꢀ
ꢯꢀꣂꢚꢪꢻꢀꢒꢝꢝꢜ
#ꢀ ꣀꢇꢍꢋꢮꢆꢏꢀꢴꢪꢛꢀꢸꢋ
#ꢀ ꣀꢍꢆꢮꢀꢙꢥꢀꢉꢆꢊꢔꢈ
#ꢀ ꢱꢍꢝꢇꢔꢉꢍꢄꢔꢀꢒꣀꢯꢩꢯꢱꢜꢏꢀꢬꣂꢭꢪꢫꢀꢯꢀꢭꢭꢬꢪꢫꢀ
ꢯꢀꢛꢛꢻꢪꢧꢀꢒꢝꢝꢜ
#ꢀ ꣀꢇꢍꢋꢮꢆꢏꢀꣂꢪꢴꢀꢸꢋ
32PFL3406H
#ꢀ ꣀꢍꢆꢮꢄꢂꢆꢀꢙꢥꢀꢉꢆꢊꢔꢈ
#ꢀ ꢱꢍꢝꢇꢔꢉꢍꢄꢔꢀꢒꣀꢯꢩꢯꢱꢜꢏꢀꢬꢴꢬꢪꢭꢀꢯꢀꢭꢺꢭꢪꢻꢀ
ꢯꢀꢴꢺꢪꢭꢀꢒꢝꢝꢜ
#ꢀ ꣀꢇꢍꢋꢮꢆꢏꢀꢬꢪꢴꢀꢸꢋ
#ꢀ ꣀꢍꢆꢮꢀꢙꢥꢀꢉꢆꢊꢔꢈ
#ꢀ ꢱꢍꢝꢇꢔꢉꢍꢄꢔꢀꢒꣀꢯꢩꢯꢱꢜꢏꢀꢬꢴꢬꢪꢭꢀꢯꢀꢭꢧꢬꢪꢻꢀ
ꢯꢀꢛꢛꢻꢪꢧꢀꢒꢝꢝꢜ
#ꢀ ꣀꢇꢍꢋꢮꢆꢏꢀꣂꢪꢧꢀꢸꢋ
EN ꢧꢭ
Download from Www.Somanuals.com. All Manuals Search And Download.
Cannot remove ‘e-sticker’ banner displayed on
theTV.
9 Troubleshooting
#
To remove the logos and images, set the
location of your TV to home.
This section describes commonly encountered
issues and accompanying solutions.
1. Press
.
2. Select [Setup] > [TV settings] >
[Preferences] > [Location].
3. Select [Home] and press OK.
GeneralTV issues
TheTV does not switch on:
TV channel issues
#
Disconnect the power cable from the
power outlet. Wait for one minute then
reconnect it.
Previously installed channels do not appear in
the channel list:
#
Check that the power cable is securely
connected.
#
Check that the correct channel list is
selected.
The remote control is not working properly:
No digital channels were found during the
installation:
#
#
Check that the remote control batteries
are correctly inserted according to the
+/- orientation.
Check that the TV supports DVB-T, DVB-
T Lite or DVB-C in your country.
#
#
Replace the remote control batteries if
Y,*‘ꢃ><*ꢃ]>YꢃJ<ꢃ„*>”}
Clean the remote control and TV sensor
lens.
Some channels are not automatically installed
on myTV:
#
During installation, make sure that
you select the country where you are
installing the TV.
The standby light on theTV blinks red:
#
Disconnect the power cable from the
power outlet. Wait until the TV cools
down before reconnecting the power
cable. If the blinking reoccurs, contact
Philips Consumer Care.
You forgot the code to unlock theTV lock
feature
#
Enter ‘8888’.
TheTV menu is in the wrong language.
#
Change the TV menu to your preferred
language.
When turning theTV on/off/to standby, you
hear a creaking sound from theTV chassis:
#
No action is required. The creaking sound
is normal expansion and contraction of
the TV as it cools down and warms up.
This does not impact performance.
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture issues
Sound issues
TheTV is on, but there is no picture:
There is a picture but sound quality is poor:
#
Check that the antenna is properly
connected to the TV.
Note
#
Check that the correct device is selected
as the TV source.
# If no audio signal is detected, the TV
automatically switches the audio output off
— this does not indicate malfunction.
There is sound but no picture:
#
Check that the picture settings are
correctly set.
#
Check that all cables are properly
connected.
There is poorTV reception from an antenna
connection:
#
#
#
Check that the volume is not set to 0.
Check that the sound is not muted.
Check that the antenna is properly
connected to the TV.
There is a picture but the sound quality is
poor:
#
#
Loudspeakers, unearthed audio devices,
neon lights, high buildings and other large
J‚ƒ*XYZꢃX>]ꢃ;]]W*]X*ꢃ<*X*[Y;J]ꢃ®W>~;Y‘}ꢃ
If possible, try to improve the reception
quality by changing the antenna direction
or moving devices away from the TV.
If reception on only one channel is poor,
\]*ꢃYW]*ꢃY,;ZꢃX,>]]*~}
Check that the sound settings are
correctly set.
There is a picture but sound comes from one
speaker only:
#
Verify that sound balance is set to the
centre.
#
There is poor picture quality from connected
devices:
#
HDMI connection issues
Check that the devices are connected
properly.
Check that the picture settings are
correctly set.
There are problems with HDMI devices:
#
#
Note that HDCP (High-bandwidth Digital
Content Protection) support can delay
the time taken for a TV to display content
from a HDMI device.
TheTV did not save your picture settings:
#ꢃ Check that the TV location is set to the
home setting. This mode offers you the
]*¯;‚;~;Y‘ꢃYJꢃX,>]*ꢃ>]QꢃZ>€*ꢃZ*YY;]Z}
Hꢕꢄꢈꢊꢎꢔꢓꢋꢉꢄꢈꢖ&ꢄꢅꢈꢑ&ꢓꢈ\ꢓꢈꢓꢕꢄꢈꢅꢔꢉꢄꢄꢑꢈꢎꢓꢈꢎꢅꢈꢓ&&ꢈ
big or too small:
#
If the TV does not recognise the HDMI
device and no picture is displayed, try
switching the source from one device to
another and back again.
#
Try using a different picture format.
#
#
If there are intermittent sound
The picture position is incorrect:
disruptions, check that output settings
from the HDMI device are correct.
If you use an HDMI-to-DVI adapter
or HDMI-to-DVI cable, check that an
additional audio cable is connected to
AUDIO IN (mini-jack only).
#
Picture signals from some devices may
]JYꢃ\YꢃY,*ꢃZX<**]ꢃXJ<<*XY~‘}ꢃ˜,*X”ꢃY,*ꢃ
signal output of the device.
EN 47
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer connection issues
The computer display on theTV is not stable:
#
Check that your PC uses the supported
resolution and refresh rate.
Set the TV picture format to unscaled.
#
Contact us
If you cannot resolve your problem, refer to
com/support.
If the problem remains unresolved, contact
Philips Consumer Care in your country as
listed in the Addendum.
Warning
# Do not attempt to repair the product yourself.
This may cause severe injury, irreparable
damage to your product or void your
warranty.
Note
# Make a note of your TV model and serial
number before you contact Philips. These
numbers are printed on the back of the TV
and on the packaging.
Download from Www.Somanuals.com. All Manuals Search And Download.
D
10 Index
demo
30
devices
add
14
12
A
watch
age rating
23, 24
digital channels
digital radio
language, change
subtitles
analogue channels
\]*ŒYW]*ꢃ
28
25
25
44
24
&#
25
25
language, change
audio language
dimensions
display, wallpaper
C
CAM
E
enable
Insert
care
care
channels
channel list
favourites
38
38
5
EasyLink
control devices, from TV remote
enable
39
39
5
hear from other speakers
automatically
40
41
41
40
41
21
12
20
manually
picture quality, retain
subtitled video, maximise view
switch to standby, all devices
Electronic Programme Guide
environmental care
end of use
hide or unhide
install (automatic)
install (manual)
rearrange
20
31
32
33
rename
32
6
6
6
reorder
33
recycle
switch
11
while you watch TV
EPG, menu
update
31
21
ꢔꢕꢏꢑꢑꢄꢍꢅ‡ꢈ\ꢑꢄ¡ꢓꢋꢑꢄꢈ¢ꢏꢑꢏꢍ&5ꢋꢄ£
child lock
32
23, 24
22
F
clock
factory settings
favourites list, add
30
20
common interface
computer, see PC
Conditional Access Module
connect
38
37
38
H
connect device
connect, PC
connect, USB
connectors
controls
34
37
26
HDMI
34, 36
34
HDMI ARC
hearing impaired
ꢕꢎ5ꢕ¡ꢖꢄ\ꢑꢎꢓꢎ&ꢑꢈ¢(ꢐ£‡ꢈꢔ&ꢑꢓꢄꢑꢓ
home menu
home mode
18
34, 36
7
34, 36
14
30
EN 49
Download from Www.Somanuals.com. All Manuals Search And Download.
I
S
install
Scenea, see screen saver
Scenea, switch on
screen saver
settings
24
24
24
install channels
install channels (automatic)
install channels (manual)
31
32
assistant
15
16, 15
17, 18
30
picture
sound
K
kensington lock
42
shop mode
sleeptimer
smart picture
smart sound
software
23
15
L
17
language
audio
25
25
25
30
digital broadcast update
USB update
sound settings
ꢅꢊꢄꢔꢎ\ꢔꢏꢓꢎ&ꢑꢅ
standby
29
28
menu
subtitles
17, 18
43
location, home or shop
11
M
subtitle, language
subtitles
25
multimedia
26
26
40, 41
25
ꢒꢋꢍꢓꢎꢒꢄꢖꢎꢏ‡ꢈꢊꢍꢏ8ꢈ\ꢍꢄꢅ
mute TV speakers
switch
10
switch TV on or off
10, 11
P
T
PC, display resolutions
picture format
picture settings
Pixel Plus link
position the TV
power
43
16
15, 16
41
teletext
dual screen
enlarge
19
19
19
19
19
46
subpages
Table Of Pages
teletext 2.5
troubleshoot
30
43
R
recycle
6
U
reinstall TV
remote control
onscreen
31
universal access
18
39
8
32
33
V
overview
visually impaired
volume
18
13
rename channels
reorder channels
W
wall mount
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Info for UK only.
Information about how to
re-tune your TV during the
digital TV switchover.
Television in the UK is going digital, bringing us How the switchover affects
all more choice and new services. Starting in
late 2007 and ending in 2012, television
your TV equipment:
services in the UK will go completely digital, TV
region by TV region.
Your new TV has a digital tuner built in, which
means it is ready to receive the Freeview signal
by simply plugging it into your aerial socket
(check if you can get digital TV through your
aerial now, or whether you’ll have to wait until
switchover, at www.digitaluk.co.uk).
Please see the next page to find out when your
area switches to digital.
Digital UK is the independent, non-profit
organisation leading the process of digital TV
switchover in the UK. Digital UK provides im-
partial information on what people need to do
to prepare for the move to digital, and when
they need to do it.
When the TV switchover happens in your area,
there are at least two occasions when you will
need to re-tune your TV in order to continue
receiving your existing TV channels, and also to
pick up new ones.
EN 51
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital UK, the body leading the digital TV
switchover, will advise you when you need to
re-tune during the switchover.
How to re-tune:
1. Press h on the remote control.
2. Select Setup and press OK.
If you do not re-tune your channels when
advised to do so by Digital UK, you may lose
some or all of your channels until you do
re-tune. You should re-tune your TV every
few months to check for any new channels.
If you choose to connect your TV to satellite or
cable with a digital box then it will not be
affected by switchover, and you won’t need to
re-tune.
3. Select Search for channels and press OK.
4. Select Reinstall channels and press OK.
5. Select your country (UK) and press OK.
6. Select Antenna DVB-T and press OK.
7. Select Start and press OK.
The installation can take several minutes.
When the installation is complete, press OK.
Your TV is now retuned.
If you have any questions, please contact your
equipment supplier or call Digital UK on …
If you are missing any channels, it may be
that they are not available in your area, or
that your aerial needs upgrading.
When does switchover happen?
*
Copeland switches on October 17, 2007
The exact date you switch
depends on the transmitter
you are served by. To check
when you switch, go to
Digital UK’s postcode
checker on
Check your ITV news service
or look at Teletext page 106
to see what TV region you’re
in.
Visit us at digitaluk.co.uk
Call us on 0845 6 50 50 50†
*
Calls charged at BT rate of 3p per minute daytime and
1p per minute evenings and weekends. Rates may vary
for calls from non-BT lines.
52 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2011 Koninklijke Philips Electronics N.V.
All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
|