Philips Camcorder NV GS120EB User Manual

R
Operating Instructions  
Digital Video Camera  
Model No.  
NV-GS120EB  
NV-GS200EB  
Before use, please read these instructions completely.  
VQT0H94  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
These Operating Instructions apply to models  
NV-GS200 and NV-GS120.  
The illustrations used in these Operating  
Instructions show model NV-GS200, however,  
parts of the explanation refer to different  
models.  
ª Carefully observe copyright laws.  
Recording of pre-recorded tapes or discs or  
other published or broadcast material for  
purposes other than your own private use  
may infringe copyright laws. Even for the  
purpose of private use, recording of certain  
material may be restricted.  
Depending on the model, some functions are  
not available.  
The Movie Camera uses copyright-protected  
technologies and is protected by the patented  
technologies and intellectual properties of  
Japan and the U.S. To use these  
copyright-protected technologies, authorization  
of the Macrovision Company is required. It is  
prohibited to disassemble or modify the Movie  
Camera.  
Windows is a trademark or registered  
trademark of Microsoft Corporation U.S.A.  
SD Logo is a trademark.  
Leica is a registered trademark of Leica  
microsystems IR GmbH and Dicomar is a  
registered trademark of Leica Camera AG.  
All other company and product names in the  
operating instructions are trademarks of their  
respective corporations.  
Files recorded on a MultiMediaCard or SD  
Memory Card  
It may not be possible to play back the files on  
this Movie Camera recorded on and created by  
other equipment or vice versa. For this reason,  
check the compatibility of the equipment in  
advance.  
Keep the Memory Card out of reach of children  
to prevent swallowing.  
MPEG4 moving pictures recorded in  
[SUPERFINE] cannot be recorded in the  
MultiMediaCard. (NV-GS200 only)  
Pages for reference  
Pages for reference are indicated by dashes  
either side of a number, for example: -00-  
Use only the recommended accessories.  
ª WARNING  
To prevent electric shock, do not remove the  
cover (or back); there are no user serviceable  
parts inside. (NV-GS200 only)  
Do not remove the cover (or back); there are  
no user serviceable parts inside. (NV-GS120  
only)  
Refer servicing to qualified service personnel.  
-3-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Information for Your Safety.............................. 2  
Playback Mode  
Playing Back a Tape ..................................... 36  
Finding a Scene You Want to Play Back....... 36  
Slow Motion Playback ................................... 37  
Still Playback/Still Advance Playback............ 37  
Index Search Functions................................. 38  
Playback Zoom Function............................... 38  
Playback Digital Effect Functions.................. 39  
Playing Back a Card...................................... 39  
Slide Show .................................................... 40  
Creating a Title.............................................. 41  
Adding a Title ................................................ 41  
Writing Printing Data on a Card..................... 42  
Protecting the Files on a Card....................... 43  
Deleting the Files Recorded on a Card ......... 43  
Formatting a Card ......................................... 43  
Enlarging a Movie Picture Size ..................... 44  
Playing Back on Your TV .............................. 44  
Before Use  
Standard Accessories...................................... 5  
Optional Accessories....................................... 5  
Controls and Components............................... 6  
The Remote Controller .................................... 9  
Power Supply ................................................ 10  
Charging Time and  
Available Recording Time........................... 11  
The One-touch Free Style Grip Belt .............. 11  
Attaching the Lens Cap ................................. 12  
Attaching the Shoulder Strap......................... 12  
Inserting a Cassette....................................... 13  
Using a Card.................................................. 13  
Turning on the Movie Camera....................... 14  
Selecting Modes............................................ 14  
Using the Viewfinder/LCD Monitor ................ 14  
Using the Menu Screen................................. 15  
List of Menus ................................................. 16  
Setting Date and Time................................... 20  
Internal Lithium Battery Recharge................. 20  
LP Mode ........................................................ 20  
Audio Recording Mode.................................. 20  
Editing Mode  
Recording from a Tape onto a Card.............. 46  
Recording Pictures from a Card  
onto a Tape................................................. 46  
Audio Dubbing............................................... 46  
Copying on an S-VHS  
Recording Mode  
(or a VHS) Cassette.................................... 47  
Recording the Contents of  
Other Equipment......................................... 48  
Using the DV Cable for Recording ................ 48  
Printing pictures with directly connecting  
to the printer (PictBridge)............................ 49  
About Recording............................................ 21  
Recording on a Tape..................................... 21  
Recording a Still Picture on a Card  
(Photoshot) ................................................. 22  
Recording a Moving Picture on a Card  
(MPEG4)..................................................... 24  
Quick Start..................................................... 25  
Self-timer Recording...................................... 25  
Zoom In/Out Functions.................................. 25  
Digital Zoom Function.................................... 26  
Image Stabilizer Function.............................. 26  
Fade In/Out Functions................................... 27  
Backlight Compensation Function................. 27  
Night View Functions..................................... 28  
Soft Skin Function ......................................... 28  
Wind Noise Reduction Function .................... 28  
Cinema Function ........................................... 29  
Recording in Special Situations..................... 29  
Recording in Natural Colours ........................ 29  
Adjusting White Balance Manually ................ 30  
Manual Shutter Speed Adjustment................ 31  
Manual Iris Adjustment.................................. 32  
Manual Focus Adjustment............................. 32  
Using the Built-in Video Flash ....................... 33  
Red Eye Reduction Function......................... 33  
Digital Effect Functions.................................. 33  
With a PC  
USB Connection Kit....................................... 51  
Using as a Web Camera or  
with DV STUDIO......................................... 51  
Using a Card in a Personal Computer........... 51  
Others  
Indications ..................................................... 53  
Initializing the Modes..................................... 54  
Warning/Alarm Indications ............................ 55  
Notes and Hints............................................. 56  
Cautions for Use............................................ 63  
Before Requesting Repair  
(Problems and Solutions) ........................... 67  
Explanation of Terms .................................... 68  
Specifications  
Specifications ................................................ 70  
Index.............................................................. 73  
-4-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Use  
3) Remote Controller and Button-Type  
Before Use  
ª Sales and Support Information  
Battery -9-  
4) Free Style Remote Controller with Mic -8-  
5) Lens Cap and Lens Cap Cord -12-  
6) AV Cable -44-  
Customer Care Centre  
For UK customers: 08705 357357  
For Republic of Ireland customers:  
01 289 8333  
Visit our website for product information  
E-mail: [email protected]  
7) Shoulder Strap -12-  
8) SD Memory Card -13-  
9) USB Connection Kit (USB Cable and  
CD-ROM) -51-  
Optional Accessories  
Technical Support for AV Software  
For callers in UK: 08701 505610  
For callers in ROI: 0044 8701 505610  
1) AC Adaptor (VW-AD10B)  
2) Battery Pack (Lithium/CGA-DU07/680mAh)  
3) Battery Pack (Lithium/CGA-DU14/1360mAh)  
4) Battery Pack (Lithium/CGA-DU21/2040mAh)  
5) Wide Conversion Lens (VW-LW3707M3E)  
6) Tele Conversion Lens (VW-LT3714M2E)  
7) ND Filter (VW-LND37E)  
8) MC Protector (VW-LMC37E)  
9) Stereo Microphone (VW-VMS2E)  
10) Video DC Light (VW-LDC10E)  
11) Video DC Light (VW-LDH3E)  
12) Light Bulb for Video DC Light (VZ-LL10E)  
13) Light Bulb for Video DC Light (VW-LL3E)  
14) Stereo Zoom Microphone (VW-VMH3E)  
15) Shoe Adaptor (VW-SK11E)  
Direct Sales at Panasonic UK  
Order accessory and consumable items for your  
product with ease and confidence by phoning  
our Customer Care Centre Monday–Friday  
9:00am– 5:30pm. (Excluding public holidays).  
Or go on line through our Internet Accessory  
Most major credit and debit cards accepted.  
All enquiries transactions and distribution  
facilities are provided directly by Panasonic UK  
Ltd.  
It couldn’t be simpler!  
16) Video Flash (VW-FLH3E)  
17) Tripod (VW-CT45E)  
18) Snow & Rain Jacket (VW-SJGS200E)  
19) DV Cable (VW-CD1E)  
Also available through our Internet is direct  
shopping for a wide range of finished products,  
take a browse on our website for further details.  
Standard Accessories  
20) DV Editing Software with DV Interface Board  
(VW-DTM41E)  
21) DV Editing Software (VW-DTM40E)  
22) SD Memory Card Application Software  
(VW-SWA1E)  
Illustrated are accessories supplied with the  
Movie Camera.  
1)  
“TitleStudio” software for title creation, and  
“SD-Jukebox” software for recording music  
are included. (However, this Movie Camera  
cannot play back music.)  
VSK0651  
K2GJ2DZ00017  
RJA0053-3X  
2)  
4)  
3)  
23) SD Memory Card (RP-SD032/  
RP-SD064/RP-SD128/RP-SDH256/  
RP-SDH512)  
24) PC Card Adaptor for SD Memory Card  
(BN-SDABPE)  
CGA-DU14  
(NV-GS200)  
VSB0471  
(NV-GS120)  
N2QAGC000018  
5)  
6)  
25) USB Reader Writer for SD Memory Card  
(BN-SDCAPE)  
Some optional accessories may not be  
available in some countries.  
N2QCBD000030  
VYF2973  
K2KC4CB00009  
7)  
8)  
9)  
VFC3506  
VFA0425  
1) AC Adaptor, DC Input Lead and AC Mains  
Lead -10-  
2) Battery Pack -10-  
-5-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Use  
(11) Colour Night View Button  
Controls and Components  
[COLOUR NIGHT VIEW] -28-  
(12) Soft Skin Button [SOFT SKIN] -28-  
(13) Tele Macro Button [TELE MACRO] -26-  
(14) Menu Button [MENU] -15-  
(15) Pause Button [;] -39-  
ª Movie Camera  
(1)  
Still Button [STILL] -22-  
(16) Fast Forward/Cue Button [5] -36-, -39-  
(17) Play Button [1] -36-, -39-  
Enter Button [ENTER] -16-  
(18) Stop Button [] -36-, -39-  
(4)  
(5)  
(6)  
Fade Button [FADE] -27-  
(19) Rewind/Review Button [6] -36-, -39-  
(2) (3)  
(1) Smart Accessory Shoe  
(20) (21) (22) (23) (24)  
(25)  
The Video DC Light (VW-LDH3E; optional),  
Video Flash (VW-FLH3E; optional) or the  
Stereo Zoom Microphone  
(VW-VMH3E; optional), etc. can be  
attached here. Power is supplied directly  
from the Movie Camera when using an  
accessory supported by the Smart  
Accessory Shoe.  
(26)  
(30)  
(31)  
(27) (28) (29)  
Do not touch the connector part of the  
Smart Accessory Shoe.  
(2) LCD Monitor Open Button [PUSH OPEN]  
-14-  
(20) Built-in Video Flash (NV-GS200 only) -33-  
(21) Flash Open Lever [ßL] (NV-GS200 only)  
-33-  
(22) Lens Hood -66-  
(3) LCD Monitor -14-, -66-  
(23) Lens (LEICA DICOMAR)  
(24) Focus Ring (NV-GS200 only) -32-  
(25) Eyecup  
(26) Power LCD Button [POWER LCD] -15-  
Power LCD Lamp -15-  
(27) Recording Lamp -21-  
(28) Microphone (built-in, stereo) -26-, -28-  
(29) White Balance Sensor -30-  
Remote Control Sensor -9-  
(30) Lock Button -12-  
Due to limitations in LCD production  
technology, there may be some tiny  
bright or dark spots on the LCD  
Monitor screen. However, this is not a  
malfunction and does not affect the  
recorded picture.  
(4) Card Slot Cover -13-  
(5) Card Slot -13-  
(6) Card Slot Cover Open Lever [OPEN] -13-  
(31) Lock Cover -12-  
(35) (36) (37) (38)  
(32)  
(10) (11) (12) (13)  
REMOTE/MIC  
(PLUG IN POWER)  
COLOUR  
NIGHT  
VIEW  
SOFT  
SKIN  
TELE  
MACRO  
(33)  
(7)  
AV IN/OUT  
PHONES  
SD  
MULTI/  
P-IN-P  
STILL  
CARD  
(34)  
REC  
BACK LIGHT  
ENTER  
FADE  
s
i
(8)  
(9)  
PUSH  
CLOSE  
ACCESS  
(32) USB Socket [ ] -51-  
(33) Socket for Free Style Remote Controller  
with Mic [REMOTE] -22-  
(14) (15)(16)(17)(18)(19)  
(7) Recording Check Button [S] -21-  
Recording Button [REC] -48-  
(8) Backlight Button [BACK LIGHT] -27-, -48-  
(9) Card Access Lamp [ACCESS] -13-  
(10) Multi Button [MULTI] -34-, -40-  
Picture-in-Picture Button [P-IN-P] -35-  
Microphone Socket [MIC]  
When connecting an external microphone  
or audio equipment to this socket, the  
built-in microphone does not operate.  
-6-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Use  
When connecting the Free Style Remote  
(46) Zoom Lever [W/T] -25-  
Controller with Mic to this socket and the  
[TALK] Button is pressed, the built-in  
microphone does not operate. -22-  
When connecting the pin plug of the Free  
Style Remote Controller with Mic to this  
socket, plug it in as far as it goes.  
A compatible plug-in powered microphone  
can be used.  
The microphone may make noises  
depending on the type of it. In this case, we  
recommend using the battery for the Movie  
Camera.  
Volume/Jog Lever [`VOL/JOG_] -36-, -37-  
(47) Photoshot Button [PHOTO SHOT] -22-, -46-  
(49) (50) (51) (52) (53)  
(48)  
(54)  
S-VIDEO  
DV  
IN/OUT  
(34) Audio-Video Input/Output Socket  
[AV IN/OUT] (Input function on NV-GS200  
Model only) -44-  
(55) (56)  
Headphone Socket [PHONES]  
Connecting an AV Cable to this socket  
activates the Movie Camera’s built-in  
speaker, but connecting a headphone, etc.  
deactivates it.  
When connecting the pin plug of the AV  
Cable to this socket, plug it in as far as it  
goes.  
When using headphones, set [AV JACK] of  
the [AV IN/OUT] (NV-GS200 only) or  
[INITIAL] Sub-Menu to [OUT/PHONES]. If  
you set [AV JACK] to [OUT], you may hear  
noises on the right.  
(48) Eyepiece Corrector Knob -14-  
(49) Viewfinder -14-, -66-  
Due to limitations in LCD production  
technology, there may be some tiny  
bright or dark spots on the Viewfinder  
screen. However, this is not a  
malfunction and does not affect the  
recorded picture.  
(50) Battery Eject Button [PUSH BATT] -10-  
(51) Battery Holder  
(52) Shoulder Strap Holders -12-  
(53) Grip Belt (One-touch Free Style Grip Belt)  
-11-  
(35) Mode Selector Switch  
[AUTO/MANUAL/FOCUS] -21-, -29-, -32-  
(36) Reset Button [RESET] -55-  
(37) Speaker -36-  
(54) Tripod Receptacle  
Used for mounting the Movie Camera on an  
optional tripod.  
(38) Cassette Eject Lever [OPEN/EJECT] -13-  
(55) DV Terminal [DV] -48-  
Connect this to the digital video equipment.  
(56) S-Video Input/Output Socket  
[S-VIDEO IN/OUT] (Input function on  
NV-GS200 Model only) -44-  
(39)  
(44)  
NV-GS200 NV-GS120  
(45)  
QUICK  
START  
(40)  
(46)  
(47)  
ON  
(41)  
(42)  
(43)  
(39) Mode Dial -14-  
(40) Quick Start Recording Button  
[QUICK START] -25-  
Quick Start Recording Lamp -25-  
(41) Power Lamp -14-, -21-, -36-  
(42) Recording Start/Stop Button -21-, -24-  
(43) Power Switch [OFF/ON] -14-, -21-, -36-, -63-  
(44) Cassette Holder  
(45) Cassette Compartment Cover -13-  
-7-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Use  
ª Remote Controller  
Using the wireless Remote Controller that is  
supplied with the Movie Camera, most of the  
Movie Camera functions can be operated from a  
distance.  
(72)  
(73)  
START/  
STOP  
DATE/ PHOTO  
TIME  
SHOT  
(78)  
OSD  
DISPLAY RESET TITLE  
MULTI/  
ZOOM  
(79)  
(80)  
T
¥REC A.DUB  
P-IN-P  
(74)  
(75)  
(76)  
(77)  
V/REW PLAY  
FF/W  
W
6
1
5
(57)  
START/  
STOP  
STILL ADV PAUSE STILL ADV  
DATE/ PHOTO  
TIME  
SHOT  
OSD  
E
;
D
(81)  
(82)  
(58)  
(59)  
(60)  
INDEX STOP INDEX P.B. ZOOM  
DISPLAY RESET TITLE  
MULTI/  
ZOOM  
K
SELECT  
L
(61)  
(62)  
T
VAR.  
¥REC A.DUB  
MENU  
P-IN-P  
SEARCH  
STORE  
V/REW PLAY  
FF/W  
ENTER  
W
6
1
5
OFF/ON  
STILL ADV PAUSE STILL ADV  
E
;
D
P.B.DIGITAL  
INDEX STOP INDEX P.B. ZOOM  
K
SELECT  
L
VAR.  
MENU  
SEARCH  
STORE  
ENTER  
(63)  
(72) Photoshot Button [PHOTO SHOT] -22-, -46-  
(73) Title Button [TITLE] -42-  
OFF/ON  
P.B.DIGITAL  
(74) Multi-Picture/Picture-in-Picture Button  
[MULTI/P-IN-P] -34-, -40-  
(75) Rewind/Review Button [6] -36-, -39-  
(76) Pause Button [;] -37-, -39-  
(77) Stop Button [] -36-, -39-  
(78) Recording Start/Stop Button  
[START/STOP] -21-, -24-  
(79) Play Button [1] -36-, -39-  
(80) Fast-forward/Cue Button [5] -36-, -39-  
(81) Playback Zoom Button [P.B. ZOOM] -38-  
(82) Enter Button [ENTER] -16-  
(57) Date/Time Button [DATE/TIME] -54-  
(58) Indication Output Button [OSD] -45-  
(59) Display Button [DISPLAY] -54-  
(60) Reset Button [RESET] -69-  
(61) Recording Button [¥REC] -48-  
(62) Audio Dubbing Button [A.DUB] -47-  
(63) Direction Buttons for Playback Zoom  
Function [π, , , ] -39-  
ª Free Style Remote Controller with Mic  
This controller allows the scene to be shot from  
various angles, high to low, and is also  
convenient when the Tripod is used. When the  
controller is not in use, attach the clip to the Grip  
Belt for convenience.  
START/  
DATE/ PHOTO  
TIME  
SHOT  
STOP  
OSD  
DISPLAY RESET TITLE  
MULTI/  
ZOOM  
T
¥REC A.DUB  
P-IN-P  
(69)  
V/REW PLAY  
FF/W  
W
6
1
5
STILL ADV PAUSE STILL ADV  
(64)  
(65)  
(66)  
(67)  
(68)  
E
;
D
INDEX STOP INDEX P.B. ZOOM  
K
SELECT  
L
(70)  
(71)  
This controller allows the Movie Camera to be for  
left-handed users.  
VAR.  
MENU  
SEARCH  
STORE  
ENTER  
OFF/ON  
P.B.DIGITAL  
(88)  
(83)  
(84)  
(85)  
(86)  
(87)  
(64) Slow Motion/Still Advance Buttons [E, D]  
(E: reverse, D: forward) -37-  
(65) Index Search Buttons [:, 9]  
(:: reverse, 9: forward) -38-  
(66) Selection Button [SELECT] -39-  
(67) Store Button [STORE] -39-  
(68) Off/On Button [OFF/ON] -39-  
(69) Zoom/Volume Button [ZOOM/VOL]  
-25-, -36-, -38-  
(70) Variable Speed Search Button  
[VAR. SEARCH] -37-  
(71) Menu Button [MENU] -15-  
(83) Microphone [MIC] -22-  
(84) Recording Start/Stop Button [REC]  
(85) Zoom Lever [W/T]  
Zoom speed changes in 2 stages.  
(86) Photoshot Button [PHOTO SHOT]  
(87) Microphone Switch Button [TALK] -22-  
When the Free Style Remote Controller with  
Mic is connected to [REMOTE] Socket and  
the [TALK] Button is pressed, the narration  
microphone is activated and the built-in  
microphone on the Movie Camera is  
deactivated.  
-8-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Use  
(88) Clip  
ª Using the Remote Controller  
1 Direct the Remote Controller at the Remote  
Control Sensor (29) of the Movie Camera  
and press an appropriate button.  
Insert the plug securely into the [REMOTE]  
Socket as far as it will goes. A loose  
connection will spoil normal operation.  
The Remote Controller  
ª Inserting a Button-type Battery  
Before using the Remote Controller, insert the  
supplied button-type battery.  
1 While pressing the Stopper 1, pull out the  
Battery Holder.  
10˚  
(29)  
15˚  
15˚  
15˚  
Distance from the Movie Camera: Within  
approximately 5 metres  
1
Angle: Within approximately 10o in the  
upward, and 15o in the downward and  
horizontal directions from the central axis  
The above operating ranges are for indoor use.  
Outdoors or under strong light, the Movie  
Camera may not operate properly even within  
the above ranges.  
Within a 1-metre range, you can also use the  
Remote Controller on the LCD Monitor side of  
the Movie Camera.  
2 Insert the button-type battery with the (i)  
marking facing upward.  
3 Insert the Battery Holder into the Remote  
Controller.  
Selecting Remote Controller Modes  
When 2 Movie Cameras are used  
simultaneously, they can be operated individually  
by selecting different Remote Controller Modes.  
If the Remote Controller Mode of the Movie  
Camera and that of the Remote Controller do  
not match, [REMOTE] Indication is displayed.  
When the button-type battery is exhausted,  
replace it with a new CR2025 battery. (A battery  
is normally expected to last about 1 year.  
However, it depends on operation frequency.)  
Make sure to match the poles correctly when  
inserting the battery.  
Setup on the Movie Camera:  
Set [REMOTE] on the [INITIAL] Sub-Menu to the  
desired Remote Controller Mode. (-17-)  
WARNING  
“THE LITHIUM BATTERY IS A CRITICAL  
COMPONENT (TYPE NUMBER CR2025  
MANUFACTURED BY PANASONIC).  
IT MUST NEVER BE SUBJECTED TO  
EXCESSIVE HEAT OR DISCHARGE. IT  
MUST THEREFORE ONLY BE FITTED IN  
EQUIPMENT DESIGNED SPECIFICALLY  
FOR ITS USE.  
Setup on the Remote Controller:  
6
1
5
STILL ADV PAUSE STILL ADV  
E
;
D
2
1
INDEX STOP INDEX P.B. ZOOM  
K
L
[VCR1]:  
Press the [D] Button and [] Button  
REPLACEMENT BATTERIES MUST BE OF  
THE SAME TYPE AND MANUFACTURER.  
THEY MUST BE FITTED IN THE SAME  
MANNER AND LOCATION AS THE  
ORIGINAL BATTERY, WITH THE  
CORRECT POLARITY CONNECTIONS  
OBSERVED.  
simultaneously. 1  
[VCR2]:  
Press the [E] Button and [] Button  
simultaneously. 2  
When the battery in the Remote Controller is  
replaced, the mode is automatically reset to  
[VCR1] Mode.  
DO NOT ATTEMPT TO RE-CHARGE THE  
OLD BATTERY OR RE-USE IT FOR ANY  
OTHER PURPOSE. IT SHOULD BE  
DISPOSED OF IN WASTE PRODUCTS  
DESTINED FOR BURIAL RATHER THAN  
INCINERATION.”  
-9-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Use  
the [CHARGE] Lamp blinks and the charging  
time becomes longer than usual.  
Power Supply  
2 Attach the charged Battery to the Movie  
Camera.  
ª Using the AC Adaptor  
1
Disconnecting the Power Source  
Set the [OFF/ON] Switch (43) to [OFF] and, while  
pressing the [PUSH BATT] Button (50), slide the  
Battery or DC Input Lead upward to disconnect it.  
1 Connect the DC Input Lead to the Movie  
Camera.  
2 Connect the DC Input Lead to the AC  
Adaptor.  
3 Connect the AC Mains Lead to the AC  
Adaptor and the AC mains socket.  
The AC Mains Lead’s outlet plug does not fit  
entirely into the AC Adaptor socket. A gap will  
remain as shown 1.  
PUSH  
(50)  
BATT  
ON  
(43)  
Before connecting or disconnecting the  
power supply, set the [OFF/ON] Switch on  
the Movie Camera to [OFF] and make sure  
that Power Lamp is not lit.  
For other notes concerning this item, see -56-.  
ª Using the Battery  
Before use, fully charge the Battery.  
We recommend using Panasonic’s Battery.  
We cannot guarantee the quality of this Movie  
Camera when batteries of other companies are  
used.  
1 Attach the Battery to the AC Adaptor and  
charge it.  
Since the Battery will not be charged when  
the DC Input Lead is connected to the AC  
Adaptor, disconnect it from the AC Adaptor.  
The [CHARGE] Lamp lights up, and charging  
starts.  
When the [CHARGE] Lamp goes off,  
charging is completed.  
When charging the overdischarged battery,  
the [CHARGE] Lamp blinks at first, but the  
battery is charged normally. When the  
temperature of the battery is too high or low,  
-10-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Use  
In the following cases, the available recording  
Charging Time and Available  
Recording Time  
time becomes shorter.  
You use both of Viewfinder and LCD Monitor  
simultaneously when using the 0 Lux Night  
View function, rotating the LCD Monitor  
frontward to record yourself  
When you set [EVF ON/AUTO] to [ON].  
When you use the Movie Camera with  
lighting the LCD Monitor up by pressing the  
[POWER LCD] Button.  
NV-GS200  
CGA-DU14  
CGA-DU21  
CGA-DU07  
A
B
C
A
B
C
A
B
C
2h45min.  
2h30min.(2h10min.)  
1h15min.(1h5min.)  
3h55min.  
3h45min.(3h15min.)  
1h55min.(1h40min.)  
1h30min.  
When you use accessories applicable to the  
Smart Accessory Shoe (Stereo Zoom  
Microphone, Video DC Light, etc.).  
1h15min.(1h5min.)  
40min.(35min.)  
The One-touch Free Style Grip Belt  
NV-GS120  
ª To Use as a Grip Belt  
Adjust the length of the Grip Belt to the size of  
your hand.  
VSB0471  
CGA-DU14  
CGA-DU21  
CGA-DU07  
A
B
C
A
B
C
A
B
C
A
B
C
2h10min.  
2h25min.(2h5min.)  
1h15min.(1h5min.)  
2h45min.  
3h.(2h40min.)  
1h30min.(1h20min.)  
3h55min.  
1 Detach the end of the Grip Belt.  
4h30min.(4h.)  
2h15min.(2h.)  
1h30min.  
2 Adjust the length of the Grip Belt to the size  
of your hand.  
1h30min.(1h20min.)  
45min.(40min.)  
A Charging Time  
B Maximum Continuous Recording Time  
C Intermittent Recording Time  
(Intermittent Recording Time is the available  
recording time with repeated recording and  
stopping actions.)  
3 Reattach the Grip Belt.  
“1h10min.” indicates 1 hour and 10 minutes.  
Battery CGA-DU14 is supplied. (NV-GS200  
only)  
Battery VSB0471 is supplied. (NV-GS120 only)  
The times shown in the table are approximate  
times. The numbers indicate the recording time  
when the Viewfinder is used. The numbers in  
parentheses indicate the recording time when  
the LCD Monitor is used. In actual use, the  
available recording time may be shorter.  
The times shown in the table are for continuous  
recording at a temperature of 25oC and humidity  
of 60%. If the Battery is charged at a higher or  
lower temperature, the charging time may be  
longer.  
ª To Use as a Hand Strap  
Using the Grip Belt as the hand strap makes it  
easier to handle and carry a Movie Camera. It is  
more convenient to use with the Free Style  
Remote Controller with Mic.  
We recommend the Battery Pack VSB0471  
(NV-GS120 only), CGA-DU14 and CGA-DU21  
for long time recording (2 hours or more for  
continuous recording, 1 hour or more for  
intermittent recording).  
-11-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Use  
1 Open the Lock Cover (31) by holding the  
tabs on both sides 1, press the Lock  
Button (30) and detach the Grip Belt.  
Attaching the Lens Cap  
To protect the Lens surface, attach the Lens Cap.  
1 Pass the end of the Lens Cap Cord through  
the hole in the Grip Belt Attachment part  
and the Lens Cap through the Lens Cap  
Cord.  
(30)  
(31)  
1
2 Detach the end of the Grip Belt.  
3 Slide A to the direction of the arrow and  
reattach the Grip Belt.  
The removed Lens Cap can be hooked onto the  
Grip Belt. (It is not possible when using as a  
hand strap.)  
When you are not recording, be sure to cover  
the Lens with the Lens Cap for protection.  
A
4 Attach the Grip Belt around your wrist.  
Attaching the Shoulder Strap  
When returning the Grip Belt to the Grip Belt  
Attachment, press the Lock Cover 2 to ensure  
that it is securely locked.  
We recommend that you attach the Shoulder  
Strap before going out of doors to record so as to  
avoid dropping the Movie Camera.  
1 Pull the end of the Shoulder Strap through  
the Shoulder Strap Holder (52) on the Movie  
Camera.  
2
2 Fold the end of the Shoulder Strap, run it  
through the Shoulder Strap Length  
Adjuster, and pull it.  
Pull it out more than 2 cm 1 from the  
Shoulder Strap Length Adjuster so that it  
cannot slip off.  
-12-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Use  
Attach the other end of the Shoulder Strap to  
the other Shoulder Strap Holder in the same  
way.  
Using a Card  
A Card can be used to record pictures.  
ª Caution before inserting/removing a  
Card  
1
Be sure to turn off the Movie Camera.  
Otherwise, the Movie Camera may not function  
properly or it may cause the loss of recorded  
data in a Card.  
Inserting a Cassette  
ª Inserting a Card  
1 Slide the [OPEN] Lever (6) to open the Card  
Slot Cover (4).  
1 Slide the [OPEN/EJECT] Lever (38) toward  
the front and pull down to open the  
Cassette Compartment Cover.  
(4)  
OPEN  
(6)  
(38)  
2 While holding the Memory Card with its cut  
corner on top 1, insert it into the Card Slot.  
2 Insert a Cassette.  
1
3 Close the Card Slot Cover (4) securely.  
Removing the Card  
3 Close the Cassette Holder by pressing the  
[PUSH] mark 1.  
Open the Card Slot Cover and then pull the Card  
straight out.  
1
After removing the Card, close the Card Slot  
Cover.  
PUSH  
ª [ACCESS] Lamp (9)  
4 Close the Cassette Compartment Cover.  
(9)  
ACCESS  
While the Movie Camera is accessing the Card  
(reading, recording, playback or erasing), the  
[ACCESS] Lamp lights up.  
While the [ACCESS] Lamp is on, never attempt  
to open the Card Slot Cover, to pull out the  
Card, to turn off the Movie Camera. Such  
actions will damage the Card, and recorded  
data, and cause the Movie Camera to  
malfunction.  
ª Accidental Erasure Prevention  
Opening the accidental erasure prevention slider  
1 on the cassette (by sliding it to the [SAVE]  
arrow direction) prevents recording. To enable  
recording, close the accidental erasure  
prevention slider (by sliding it to the [REC] arrow  
direction).  
1
R
E
C
SAVE  
For other notes concerning this item, see -56-.  
-13-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Use  
: PC Mode  
Use this mode when you want to connect the  
Movie Camera to your Personal Computer.  
Turning on the Movie Camera  
PC  
When the Movie Camera is turned on with the  
Lens Cap on, the Automatic White Balance  
Adjustment may not function properly. Please  
turn on the Movie Camera after removing the  
Lens Cap.  
Using the Viewfinder/LCD Monitor  
ª Using the Viewfinder  
Before using the Viewfinder, adjust the field of  
view so that the displays inside the Viewfinder  
become clear and easy to read.  
ª How to Turn on the Power  
1 Set the [OFF/ON] Switch (43) to [ON] while  
pressing the button 1.  
1 Tilt up the Viewfinder.  
The Power Lamp (41) lights up.  
(41)  
ON  
1
The Viewfinder can also be pulled out for use.  
Do not pull on the Eyecup to extend the  
Viewfinder.  
2 Adjust by sliding the Eyepiece Corrector  
Knob (48).  
(43)  
ª How to Turn off the Power  
1 Set the [OFF/ON] Switch (43) to [OFF] while  
pressing the button 1.  
(48)  
12:30:45  
15.10.2004  
ON  
(43)  
1
12:30:45  
15.10.2004  
Selecting Modes  
To Use the Viewfinder at the Same Time as the  
LCD Monitor  
Set [LCD/EVF] >> [EVF ON/AUTO] >> [ON].  
The Viewfinder does not turn off even if the LCD  
Monitor is opened.  
You can choose a desired mode by rotating the  
Mode Dial.  
1 Rotate the Mode Dial (39).  
When you turn the Movie Camera off, this  
setting is cancelled.  
P C  
(39)  
ª Using the LCD Monitor  
With the LCD Monitor open, you can also record  
the picture while watching it.  
1 Press the [PUSH OPEN] Button (2) and pull  
the LCD Monitor (3) out in the direction of  
the arrow.  
: Tape Recording Mode  
Use this mode when recording pictures on a tape.  
Also, you can record still pictures on the card  
simultaneously during recording on a tape.  
: Tape Playback Mode  
The Viewfinder is deactivated.  
The LCD Monitor can be opened a maximum  
of 120o. If you open the LCD monitor by 120o,  
it becomes convenient to operate menus or to  
play back pictures.  
Use this mode when playing back the recorded  
scene on a tape.  
: Card Recording Mode  
Use this mode when recording still picture or  
moving picture on a card. (moving picture on  
NV-GS200 Model only)  
: Picture Playback Mode  
Use this mode when playing back the recorded  
PUSH  
OPEN  
still picture on a card.  
: MPEG4 Playback Mode (NV-GS200 only)  
Use this mode when playing back the recorded  
moving picture on a card.  
(2)  
(3)  
-14-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Use  
2 Adjust the LCD Monitor angle according to  
the desired recording angle.  
To Increase the Brightness of the Entire LCD  
Monitor  
The LCD Monitor can rotate a maximum of  
180o 1 from the vertical position upwards  
and a maximum of 90o 2 to the downward  
direction. Forcefully rotating the LCD Monitor  
beyond these ranges will damage the Movie  
Camera. You cannot rotate the LCD Monitor  
when it is opened 120o angle. Therefore, do  
not rotate it forcibly.  
Press the [POWER LCD] Button.  
When you press the [POWER LCD] Button, the  
LCD monitor becomes bright about twice as  
much as usual.  
(26)  
POWER  
LCD  
The [POWER LCD] Lamp (26) lights up.  
When turning the power on with using AC  
Adaptor, [POWER LCD] function is  
automatically effective.  
To Resume Normal Brightness  
1180o  
290o  
Press the [POWER LCD] Button again.  
Closing the LCD Monitor  
Push the LCD Monitor until it is securely locked.  
Make sure the Card Slot Cover is closed.  
To Change the Picture Quality of the LCD  
Monitor (NV-GS200 only)  
Set the [LCD AI] on the [LCD/EVF] Sub-Menu to  
[ON] or [OFF].  
[ON]: The screen image becomes clear and  
vivid. (The effect varies according to the  
recording scene.)  
ª Adjusting Brightness and Colour  
Level  
When [LCD/EVF SET] on the [LCD/EVF]  
Sub-Menu is set to [YES], the following items are  
displayed.  
When Power LCD Lamp lights up, [LCD AI] is  
automatically set to [ON]. You cannot change  
this setting. (NV-GS200 only)  
These adjustments do not affect the recorded  
images.  
LCD/EVF SETUP  
1LCD BRIGHTNESS  
[-]||||----[+]  
LCD COLOUR LEVEL  
[-]||||----[+]  
EVF BRIGHTNESS  
[-]||||----[+]  
;/:SELECT &/%:SETUP  
!/MENU:EXIT  
For other notes concerning this item, see -66-.  
LCD Brightness [LCD BRIGHTNESS]  
Adjusts the brightness of the image on the LCD  
screen.  
LCD Colour Level [LCD COLOUR LEVEL]  
Adjusts the colour saturation of the image on the  
LCD screen.  
Brightness of the Viewfinder  
[EVF BRIGHTNESS]  
Adjusts the brightness of the image in the  
Using the Menu Screen  
To facilitate the selection of a desired function or  
setup, this Movie Camera displays various  
function setups on Menus.  
When operating the menu with the Viewfinder,  
set [LCD/EVF] >> [EVF ON/AUTO] >> [ON] or  
rotate the LCD monitor by 180o.  
1 Press the [MENU] Button (14).  
Viewfinder.  
To Adjust  
STILL  
Press the [;/] Button and select the item to be  
adjusted, and then press the [6/5] Button to  
raise or lower the number of vertical bars in the  
Bar Indication.  
ENTER  
s
i
FADE  
MENU  
(14)  
A larger number of vertical bars indicates  
stronger brightness or colour saturation.  
-15-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Use  
The Menu corresponding to the Mode  
selected by using the Mode Dial (39) is  
displayed.  
2 Press the [ENTER] Button (17) to confirm  
the selection of the file.  
After the above File Selection Procedure, carry  
out the various Menu Operations. (The above  
procedure will not be repeated in the following  
instructions.)  
P C  
(39)  
List of Menus  
The figures of the Menus are for explanation  
purposes only, and they are different from the  
actual Menus.  
2 Press the [;/] Button to select a desired  
Sub-Menu.  
Press the [;/] Button to display the  
highlighted item.  
3 Press the [5] Button to display the  
selected Sub-Menu.  
4 Press the [;/] Button to select the item.  
5 Press the [5] Button to display the  
selected item.  
ª
[TAPE RECORDING MENU]  
Tape Recording Mode  
TAPE RECORDING MENU  
CAMERA  
!PROG.AE  
SIS  
DIGITAL  
CARD  
D.ZOOM  
RECORDING  
DISPLAY  
LCD/EVF  
INITIAL  
SELF TIMER  
USB FUNCTION  
FLASH  
RED EYE  
FLASH LEVEL  
6 Press the [;/] Button to select the desired  
mode and press [ENTER] Button to  
determine the setting.  
While a Menu is displayed, you cannot record or  
play back. Menus can be displayed during  
playback but not during recording. The above  
operations can be done using the [MENU]  
Button, [π, , , ] Buttons and [ENTER]  
Button on the Remote Controller. (-8-)  
;/:SELECT  
%:NEXT  
MENU:EXIT  
1) [CAMERA]  
Camera Setup Sub-Menu  
[PROG.AE]  
Auto Exposure Mode -29-  
[SIS]  
Image Stabilizer -27-  
[D.ZOOM]  
To Return the Previous Screen  
Press the [6] Button.  
Digital Zoom -26-  
[SELF TIMER]  
To Exit the Menu Screen  
Press the [MENU] Button again.  
About the Menu Mode Setting  
The setting selected on the Menu will be retained  
even when the Movie Camera is turned off.  
However, if the Battery or AC Adaptor is  
disconnected before turning off the Movie  
Camera, the selected setup may not be retained.  
(The setups of [EFFECT2] (-34-) are not retained.)  
Self-timer Recording -25-  
[USB FUNCTION]  
USB Functions Mode -51-  
[FLASH] (NV-GS200 only)  
Flash -33-  
[RED EYE]  
Red Eye Reduction -33-  
[FLASH LEVEL] (NV-GS200 only)  
Flash Level -33-  
If you press [6] Button, the menu changes  
back to the previous screen.  
2) [DIGITAL]  
Digital Setup Sub-Menu  
[EFFECT1]  
Digital Effects 1 -33-  
[EFFECT2]  
Digital Effects 2 -34-  
[MULTI MODE]  
Multi-Picture Mode -34-  
[TITLE IN]  
Menu operation flow is shown in this text by >>.  
ª File Selection in the Picture/MPEG4  
Playback Mode (MPEG4 Playback  
Mode on NV-GS200 Model only)  
A File Selection Operation may be necessary  
during Menu Operations. In this case, carry out  
the following procedure.  
1 Press the [;//6/5] Button and select  
a file.  
The selected file is marked by a frame.  
Adding a Title -41-  
3) [CARD]  
PICTURE  
Card Setup Sub-Menu  
[PICT QUALITY]  
Picture Quality -23-  
[CREATE TITLE]  
Title Creation -41-  
No.25  
100-0012  
-16-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Use  
To terminate the Demonstration Mode, insert a  
4) [RECORDING]  
Recording Setup Sub-Menu  
Cassette or set the [DEMO MODE] to [OFF].  
[REC SPEED]  
[AV JACK]  
Recording Speed Mode -20-  
[AUDIO REC]  
AV Socket -68-  
[REMOTE]  
Audio Recording Mode -20-  
Remote Controller Mode -9-  
[SCENE INDEX]  
[REC LAMP]  
Scene Index Mode -38-  
[WIND CUT]  
Recording Lamp -21-  
[BEEP SOUND]  
Wind Noise Reduction -28-  
Beep Sound -56-  
[ZOOM MIC]  
[CLOCK SET]  
Zoom Microphone -26-  
[CINEMA]  
Date and Time Setting -20-  
[INITIAL SET]  
Cinema-like Format Recording -29-  
Initial Setting Mode -54-  
[H.SHOE MIC]  
ª
[TAPE PLAYBACK MENU]  
Hot Shoe Microphone  
This function reduces the low sound to avoid a  
wind noise when using the Stereo Zoom  
Microphone (VW-VMH3E; optional).  
5) [DISPLAY]  
Tape Playback Mode  
TAPE PLAYBACK MENU  
PLAYBACK  
AV IN/OUT  
DIGITAL  
CARD  
!SEARCH  
12bit AUDIO  
AUDIO OUT  
USB FUNCTION  
RECORDING  
DISPLAY  
LCD/EVF  
INITIAL  
Display Setup Sub-Menu  
[DISPLAY]  
;/:SELECT  
%:NEXT  
MENU:EXIT  
Display Mode -54-  
[DATE/TIME]  
Date and Time Indication -54-  
[C.DISPLAY]  
Counter Display Mode -54-  
[C.RESET]  
1) [PLAYBACK]  
Playback Functions Sub-Menu  
[SEARCH]  
Index Search Mode -38-  
[12bit AUDIO]  
Audio Selector -47-  
[AUDIO OUT]  
Audio Output Mode -60-  
[USB FUNCTION]  
USB Functions Mode -51-  
2) [AV IN/OUT] (NV-GS200 only)  
Audio-Video Input/Output Setup Sub-Menu  
[AV JACK]  
AV Socket -46-  
[A.DUB INPUT]  
Audio Dubbing Input -46-  
[DV OUT]  
Analog-Digital Conversion Output -63-  
3) [DIGITAL]  
Playback Digital Setup Sub-Menu  
[EFFECT ON]  
Digital Effect On/Off -39-  
[EFFECT SEL]  
Digital Effect Selection -39-  
[TITLE IN]  
Adding a Title -41-  
4) [CARD]  
Card Setup Sub-Menu  
[PICT QUALITY]  
Counter Reset -69-  
It resets the counter to zero. However, it cannot  
reset the Time Code.  
6) [LCD/EVF]  
LCD/EVF Setup Sub-Menu  
[LCD AI] (NV-GS200 only)  
Intelligent LCD Monitor -15-  
[LCD/EVF SET]  
LCD and Viewfinder Adjustment -15-  
[SELF REC]  
Recording Yourself -25-  
[EVF ON/AUTO]  
Using the Viewfinder -14-  
7) [INITIAL]  
Initial Setup Sub-Menu  
[BLANK SEARCH]  
Blank Search -22-  
[DEMO MODE]  
Demonstration Mode  
If no operation takes place for approximately  
10 minutes after the AC Adaptor is connected to  
the Movie Camera and the [OFF/ON] Switch is  
turned to [ON] without inserting a Cassette or a  
Card, the Movie Camera is automatically set to  
Demonstration Mode for introducing its functions.  
If any button is pressed or operated, the  
Picture Quality -23-  
[MPEG4 MODE] (NV-GS200 only)  
MPEG4 Picture Quality -24-  
[CREATE TITLE]  
Demonstration Mode is cancelled. The  
Demonstration Mode can be started by setting  
[DEMO MODE] to [ON] and by exiting the Menu.  
Title Creation -41-  
-17-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Use  
5) [RECORDING]  
Recording Setup Sub-Menu  
[BEEP SOUND]  
Beep Sound -56-  
[REC SPEED]  
Recording Speed Mode -20-  
[AUDIO REC]  
ª
[CARD RECORDING MENU]  
Card Recording Mode  
Audio Recording Mode -20-  
6) [DISPLAY]  
Display Setup Sub-Menu  
[DISPLAY]  
CARD RECORDING MENU  
CAMERA  
!PROG.AE  
SHTR EFFECT  
SELF TIMER  
FLASH  
DIGITAL  
CARD  
RECORDING  
DISPLAY  
LCD/EVF  
INITIAL  
RED EYE  
FLASH LEVEL  
Display Mode -54-  
;/:SELECT  
%:NEXT  
MENU:EXIT  
[DATE/TIME]  
Date and Time Indication -54-  
[C.DISPLAY]  
Counter Display Mode -54-  
[C.RESET]  
Counter Reset -69-  
1) [CAMERA]  
Camera Setup Sub-Menu  
[PROG.AE]  
Auto Exposure Mode -29-  
[SHTR EFFECT]  
Shutter Effect  
You can add a sound like releasing the shutter.  
[SELF TIMER]  
Self-timer Recording -25-  
[FLASH] (NV-GS200 only)  
Flash -33-  
[REC DATA]  
Camera Data  
If you set [REC DATA] to [ON], the settings  
(shutter speed, iris and white balance settings  
(-29-), etc.) used during the recordings are  
displayed during playback. [---] appears on the  
display when there is no data or during Slow  
Motion Playback, Still Advance Playback or  
Variable Speed Search.  
The settings information may not be displayed  
properly if the camera data of this Movie  
Camera are played back on other equipment.  
The camera data will not be recorded in the  
following cases:  
[RED EYE]  
Red Eye Reduction -33-  
[FLASH LEVEL] (NV-GS200 only)  
Flash Level -33-  
2) [DIGITAL]  
Digital Setup Sub-Menu  
[TITLE IN]  
Adding a Title -41-  
3) [CARD]  
Card Setup Sub-Menu  
[PICTURE SIZE]  
Picture Size -23-  
[PICT QUALITY]  
Picture Quality -23-  
[MPEG4 MODE] (NV-GS200 only)  
MPEG4 Picture Quality -24-  
[CREATE TITLE]  
Title Creation -41-  
[BURST MODE]  
When the data are recorded from a card to  
a tape.  
When recording proceeds with no input  
signals supplied.  
When recording involves the use of the  
S-Video or AV Input Socket. (NV-GS200  
only)  
When pictures with no camera data are  
recorded using the DV Terminal.  
When displaying a list of titles.  
7) [LCD/EVF]  
Adjusting Brightness and Colour Level  
[LCD AI] (NV-GS200 only)  
Intelligent LCD Monitor -15-  
[LCD/EVF SET]  
LCD and Viewfinder Adjustment -15-  
[EVF ON/AUTO]  
Using the Viewfinder -14-  
8) [INITIAL]  
Initial Setup Sub-Menu  
Continuous Photoshot -24-  
4) [RECORDING]  
Recording Setup Sub-Menu  
[WIND CUT]  
Wind Noise Reduction -28-  
[H.SHOE MIC]  
Hot Shoe Microphone  
This function reduces the low sound to avoid a  
wind noise when using the Stereo Zoom  
Microphone (VW-VMH3E; optional).  
5) [DISPLAY]  
Display Setup Sub-Menu  
[DISPLAY]  
Display Mode -54-  
[DATE/TIME]  
[BLANK SEARCH]  
Blank Search -22-  
[AV JACK] (NV-GS120 only)  
AV Socket -68-  
[REMOTE]  
Remote Controller Mode -9-  
Date and Time Indication -54-  
-18-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Use  
5) [DISPLAY]  
6) [LCD/EVF]  
Adjusting Brightness and Colour Level  
All of the items on the [LCD/EVF] Sub-Menu are  
the same as those on the [LCD/EVF] Sub-Menu  
of the [TAPE RECORDING MENU].  
7) [INITIAL]  
Display Setup Sub-Menu  
All of the items on the [DISPLAY] Sub-Menu are  
the same as those on the [DISPLAY] Sub-Menu  
of the [TAPE RECORDING MENU].  
6) [LCD/EVF]  
Initial Setup Sub-Menu  
[AV JACK]  
AV Socket -68-  
[REMOTE]  
Adjusting Brightness and Colour Level  
All of the items on the [LCD/EVF] Sub-Menu are  
the same as those on the [LCD/EVF] Sub-Menu  
of the [TAPE PLAYBACK MENU].  
7) [INITIAL]  
Remote Controller Mode -9-  
[REC LAMP]  
Initial Setup Sub-Menu  
Recording Lamp -21-  
[AV JACK]  
[BEEP SOUND]  
AV Socket -68-  
Beep Sound -56-  
[REMOTE]  
[CLOCK SET]  
Remote Controller Mode -9-  
Date and Time Setting -20-  
[INITIAL SET]  
Initial Setting Mode -54-  
ª
[MPEG4 PLAYBACK MENU]  
(NV-GS200 only)  
MPEG4 Playback Mode  
ª
[PICTURE PLAYBACK MENU]  
MPEG4 PLAYBACK MENU  
DELETE  
EDITING  
DISPLAY  
LCD/EVF  
INITIAL  
Picture Playback Mode  
!FILE BY SEL  
ALL FILES  
PICTURE PLAYBACK MENU  
DELETE  
EDITING  
PRINT  
!FILE BY SEL  
ALL FILES  
TITLE BY SEL  
DIGITAL  
DISPLAY  
LCD/EVF  
INITIAL  
;/:SELECT  
%:NEXT  
MENU:EXIT  
;/:SELECT  
%:NEXT  
1) [DELETE]  
MENU:EXIT  
Deleting a File Sub-Menu  
[FILE BY SEL]  
1) [DELETE]  
Deleting a File Sub-Menu  
[FILE BY SEL]  
Selecting and Deleting a File -43-  
[ALL FILES]  
Selecting and Deleting a File -43-  
[ALL FILES]  
Deleting All Files -43-  
2) [EDITING]  
Deleting All Files -43-  
Editing a File Sub-Menu  
[TITLE BY SEL]  
[FILE LOCK]  
Selecting and Deleting a Title -43-  
2) [EDITING]  
Setting the Lock -43-  
[CARD FORMAT]  
Editing a File Sub-Menu  
Formatting a Card -43-  
[FILE LOCK]  
3) [DISPLAY]  
Setting the Lock -43-  
[DPOF SET]  
Display Setup Sub-Menu  
[SCREEN]  
Setting DPOF -42-  
Screen Setting -44-  
[CARD FORMAT]  
[DISPLAY]  
Formatting a Card -43-  
Display Mode -54-  
3) [PRINT]  
[DATE/TIME]  
Printing Setting Sub-Menu  
[THIS PICTURE]  
Date and Time Indication -54-  
4) [LCD/EVF]  
Printing Only the Displayed Picture -50-  
[DATE]  
Printing with Recording Date -50-  
4) [DIGITAL]  
Playback Digital Setup Sub-Menu  
Adjusting Brightness and Colour Level  
All of the items on the [LCD/EVF] Sub-Menu are  
the same as those on the [LCD/EVF] Sub-Menu  
of the [TAPE PLAYBACK MENU].  
5) [INITIAL]  
[TITLE IN]  
Adding a Title -41-  
Initial Setup Sub-Menu  
All of the items on the [INITIAL] Sub-Menu are  
the same as those on the [INITIAL] Sub-Menu  
of the [PICTURE PLAYBACK MENU].  
-19-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Use  
1 Connect the AC Adaptor to the Movie  
Camera with the power turned off and then  
connect to the AC Mains socket.  
Setting Date and Time  
Since the internal clock of the Movie Camera has  
a slight imprecision, make sure to check the time  
before recording.  
STILL  
ENTER  
s
i
FADE  
MENU  
(14)  
1 Set [TAPE RECORDING MENU] or  
[CARD RECORDING MENU] >> [INITIAL] >>  
[CLOCK SET] >> [YES].  
After charging for 4 hours, the built-in lithium  
battery can power the clock for approximately  
3 months.  
CLOCK SET  
1YEAR  
MONTH  
DAY  
2004  
10  
8
HOUR  
MIN.  
14  
30  
WARNING  
;/:SELECT &/%:SETUP  
THE LITHIUM BATTERY IN THIS  
EQUIPMENT MUST ONLY BE REPLACED  
BY QUALIFIED PERSONNEL. WHEN  
NECESSARY, CONTACT YOUR LOCAL  
PANASONIC SUPPLIER.  
!/MENU:EXIT  
2 Press the [;/] Button to select [YEAR],  
[MONTH], [DAY], [HOUR] or [MIN.] and  
press the [6/5] Button to set it to the  
desired value.  
Year will cycle in the order shown below.  
2000, 2001, ..., 2089, 2000, ...  
LP Mode  
A desired recording speed can be selected with  
[REC SPEED] on the [RECORDING] Sub-Menu.  
If LP Mode is selected, the recording time  
becomes 1.5 times longer than that of SP  
Mode.  
Although the image quality does not decrease  
with the LP Mode recording, mosaic-pattern noise  
may appear on a playback image, or some  
normal functions may be restricted.  
The contents that are recorded in LP Mode are  
not completely compatible with other  
equipment.  
3 Press the [MENU] Button (14) to finish  
setting the date and time.  
The clock operation starts from [00] second.  
If the built-in battery is weak, the [0] or [--]  
Indication flashes. In this case, charge the  
built-in battery.  
The clock uses the 24-hour system.  
Internal Lithium Battery Recharge  
The internal lithium battery sustains the operation  
of the clock. When the [0] or [--] Indication  
flashes, the internal lithium battery is near  
exhaustion.  
Audio dubbing is not possible with LP Mode.  
(-46-)  
Audio Recording Mode  
The sound quality of the recorded sound can be  
selected with [AUDIO REC] on the  
[RECORDING] Sub-Menu.  
High sound-quality recording is possible with  
“16 bit 48 kHz 2 track” Mode. With the “12 bit  
32 kHz 4 track” Mode, the original sound can be  
recorded on 2 tracks in stereo, while the other  
2 tracks can be used for Audio Dubbing.  
-20-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording Mode  
Recording on a Tape  
Recording Mode  
About Recording  
1 Set the [OFF/ON] Switch (43) to [ON].  
The Power Lamp (41) lights up.  
When recording pictures on a tape, set the Mode  
Dial to Tape Recording Mode [ ].  
(41)  
ON  
When recording still pictures or moving pictures  
on a card, set the Mode Dial to Card Recording  
Mode [  
Model only)  
]. (moving pictures on NV-GS200  
(43)  
When recording with the  
2 Set the Mode Dial (39) to Tape Recording  
[AUTO/MANUAL/FOCUS] Switch (35) set to  
[AUTO], the Movie Camera automatically adjusts  
the focus and white balance. In some cases, they  
cannot be adjusted automatically and need to be  
adjusted manually. (-30-, -31-, -32-)  
Mode.  
(39)  
AUTO MANUAL  
FOCUS  
(35)  
3 Press the Recording Start/Stop Button (42).  
Recording starts.  
After the [RECORD] is displayed, it changes  
to [REC].  
Before turning on the power, remove the  
Lens Cap. If the Lens Cap is still attached  
when the power is turned on, Automatic  
White Balance Adjustment (-30-) may not  
function correctly.  
REC  
(42)  
RECORD  
When the Recording Pause Mode continues for  
more than 6 minutes, the power is turned off  
automatically for tape protection and power  
conservation. (If the AC Adaptor is used, the  
power is turned off only when the tape is  
inserted in Tape Recording Mode.) When the  
tape is inserted in Tape Recording Mode and if  
the Recording Pause Mode continues for more  
than 6 minutes, the power is turned off  
automatically.  
4 Press the Recording Start/Stop Button (42)  
again to pause the recording.  
The [PAUSE] Indication is displayed.  
PAUSE  
PAUSE  
Even if the Mode Dial is set to Tape Recording  
Mode and the recording to a tape is in progress,  
you can also record a still picture on a card by  
pressing the [PHOTO SHOT] Button.  
To resume recording from this condition, turn  
off, then turn on the power again.  
ª Recording Lamp  
The Recording Lamp (27) lights up during  
recording and alerts those being recorded that  
recording is in progress.  
ª To Check the Recording  
By pressing the [S] Button (7) briefly in the  
Recording Pause Mode, you can play back the  
last few seconds of the recorded scene.  
(7)  
(27)  
The [CHK] Indication is displayed. After  
checking, the Movie Camera resumes the  
Recording Pause Mode.  
The Recording Lamp does not light up if the  
[REC LAMP] on the [INITIAL] Sub-Menu is set  
to [OFF].  
For other notes concerning this item, see -56-.  
-21-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording Mode  
ª Finding the End of Recording  
(Blank Search Function)  
ª Progressive Photoshot  
When the [æ] Indication is displayed,  
Progressive Photoshot Function works.  
You can record still pictures as frame still pictures  
with higher quality by this function.  
The Progressive Photoshot Function may not  
be activated depending on the function you use.  
(-54-)  
The Blank Search Function aids you to locate the  
end of the recording on the Cassette quickly.  
1 Set [TAPE RECORDING MENU] or  
[TAPE PLAYBACK MENU] >> [INITIAL] >>  
[BLANK SEARCH] >> [YES].  
STILL  
To record still pictures with higher quality, we  
recommend setting to the Card Recording  
Mode. (To activate the progressive function  
regardless of the function you use)  
When you record the tape and the card  
simultaneously, the progressive function is not  
activated.  
ENTER  
s
i
FADE  
(14)  
MENU  
The [BLANK] Indication appears during the  
Blank Search.  
Approximately 1 second before the last  
recorded scene, the Movie Camera switches  
to the Recording Pause Mode or the Still  
Playback Mode.  
Recording a Still Picture on a Card  
(Photoshot)  
Still pictures can be recorded on the Memory  
Card from the Movie Camera.  
The size of images that are recorded using this  
Movie Camera is approximately 2.3 million pixels  
(NV-GS200)/1.7 million pixels (NV-GS120), and  
recording of images with a size that is larger than  
a million pixels is called mega-pixel still-picture  
recording. Compared to images of normal  
recording, images that are created by mega-pixel  
still-picture recording can be printed out clear.  
If there is no blank left on the Cassette, the  
Movie Camera stops at the end of the tape.  
To Cancel Blank Search Before Completion  
Press the [] Button.  
ª To Add a Sound while Recording  
With the supplied Free Style Remote Controller  
with Mic connected to the [REMOTE] Socket (33),  
you can add a narration while recording is in  
progress.  
While the [TALK] Button (87) is pressed, the [  
Indication is displayed and the sound is recorded  
from [MIC] (83).  
When the Tape Recording Mode:  
1 Set the Mode Dial (39) to Tape Recording  
Mode.  
]
(83)  
(39)  
REC  
(87)  
2 Press the [PHOTO SHOT] Button (47) fully.  
While the [TALK] Button is pressed, the built-in  
microphone does not operate.  
PHOTO  
SHOT  
(47)  
ª Digital Still Picture  
When the [STILL] Button (15) is pressed, images  
become still pictures. When the button is pressed  
again, the Digital Still Picture Mode is cancelled.  
The size of the recorded picture is [640k480].  
To record still pictures with higher quality, we  
recommend recording in Card Recording Mode.  
(15)  
STILL  
ENTER  
s
i
FADE  
We recommend that you press the [STILL]  
Button first at the position where you wish to  
record the still picture so as to enter the Digital  
Still Picture Mode and then press the  
[PHOTO SHOT] Button.  
-22-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording Mode  
When recording in Card Recording Mode:  
(NV-GS120)  
(NV-GS200)  
1 Set the Mode Dial (39) to Card Recording  
Mode.  
1 Set the Mode Dial (39) to Card Recording  
Mode.  
(39)  
(39)  
2 Press the [PHOTO SHOT] Button (47).  
2 Press the [PHOTO SHOT] Button (47)  
The [ PICTURE ] Indication lights up in red.  
halfway.  
Selecting the Size of Photoshot Images  
2 sizes are available for Photoshot.  
1 Set [CARD RECORDING MENU] >> [CARD]  
>> [PICTURE SIZE] >> [1760k1320]  
(NV-GS200)/[1520k1152] (NV-GS120) or  
[640k480].  
PHOTO  
(47) SHOT  
1
2
STILL  
The aperture value and gain are fixed and the  
Movie Camera automatically focuses on the  
subject.  
ENTER  
s
i
FADE  
1 Shutter Chance Mark  
2 Focus Area  
(14)  
MENU  
Shutter Chance Mark  
Selecting the Quality of Photoshot Images  
1 Set [TAPE RECORDING MENU],  
Light (green): The subject is adequately  
focused. (The focus is stable  
and you can record pictures  
more clearly.)  
Light (white): The subject is almost focused.  
Blink (white): The Movie Camera is focusing  
on the subject.  
[TAPE PLAYBACK MENU] or  
[CARD RECORDING MENU] >> [CARD] >>  
[PICT QUALITY] >> a desired image quality.  
STILL  
No Mark:  
The Movie Camera cannot  
focus on the subject.  
ENTER  
s
i
FADE  
The [PHOTO SHOT] Button on the Free Style  
Remote Controller with Mic cannot be  
pressed halfway.  
(14)  
MENU  
Maximum number of images recordable on  
the supplied Card (8 MB)  
3 Press the [PHOTO SHOT] Button (47) fully.  
When the picture size is 1760k1320  
(NV-GS200):  
[FINE] (high image quality):  
approximately 3 pictures  
PHOTO  
SHOT  
(47)  
[NORMAL] (normal image quality):  
approximately 6 pictures  
[ECONOMY] (low image quality):  
approximately 9 pictures  
The [ PICTURE ] Indication lights up in red.  
The Shutter Chance Mark appears even when  
the [PHOTO SHOT] Button is not pressed.  
Check it for your reference.  
Even if the [PHOTO SHOT] Button is pressed  
halfway, the Shutter Chance Mark does not  
appear in Manual Focus Mode.  
When the picture size is 1520k1152  
(NV-GS120):  
[FINE] (high image quality):  
approximately 5 pictures  
[NORMAL] (normal image quality):  
approximately 9 pictures  
[ECONOMY] (low image quality):  
approximately 12 pictures  
-23-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording Mode  
When the Mode Dial (39) is set to Card  
When the picture size is 640k480:  
[FINE] (high image quality):  
Recording Mode, you cannot record to the  
approximately 44 pictures  
Tape.  
[NORMAL] (normal image quality):  
approximately 85 pictures  
1 Set the Mode Dial (39) to Card Recording  
Mode.  
[ECONOMY] (low image quality):  
approximately 180 pictures  
These figures vary depending on the subject  
being photographed.  
(39)  
ª Continuous Photoshot  
The still pictures can be recorded on a Card at a  
regular intervals.  
2 Press the Recording Start/Stop Button (42).  
Available only with [640k480] picture size.  
1 Set [CARD RECORDING MENU] >> [CARD]  
>> [BURST MODE] >> [ON].  
(42)  
STILL  
ENTER  
s
i
It takes 1 to 2 seconds to start recording.  
FADE  
During recording the [MPEG ] Indication is lit in  
4
red.  
(14)  
MENU  
3 Press the Recording Start/Stop Button (42)  
again to pause the recording.  
The maximum continuous recording times are  
approximately 120 minutes.  
The [  
] Indication appears.  
The Movie Camera will automatically stop  
recording when the relevant time listed above  
has elapsed.  
When Remaining Time Indication becomes  
[R:0h00m], this Indication flashes in red.  
Recording may not be started.  
The picture size of the moving picture (MPEG4)  
is set to be:  
2 Press the [PHOTO SHOT] Button (47).  
PHOTO  
SHOT  
(47)  
[SUPERFINE]: 320k240  
[FINE]: 320k240  
[NORMAL]: 176k144  
[ECONOMY]: 176k144  
When [ON] is selected, the still pictures can  
be recorded in approximately 0.5 second  
intervals until the [PHOTO SHOT] Button is  
released or 10 pictures are recorded. When  
the shutter speed is set to 1/25 manually, still  
pictures can be recorded at approximately  
0.7 second intervals. (In the case of  
NV-GS200, you cannot use the Continuous  
Photoshot function if the shutter speed is set  
to 1/4, 1/6 or 1/12.)  
When attaching to e-mail, we recommend the  
file size to be less than 1 MB.  
[SUPERFINE]: approximately 8 seconds  
[FINE]: approximately 15 seconds  
[NORMAL]: approximately 20 seconds  
[ECONOMY]: approximately 1 minute  
Selecting the Quality of MPEG4 Recording  
images  
1 Set [CARD RECORDING MENU] >> [CARD]  
>> [MPEG4 MODE] >> a desired image  
quality.  
For other notes concerning this item, see -56-.  
Recording a Moving Picture on a  
Card (MPEG4)  
STILL  
ENTER  
s
i
(NV-GS200 only)  
FADE  
You can record moving pictures on a Card. The  
recorded data can also be played back on  
Windows Media Player (ver.6.4 and later).  
(14)  
MENU  
-24-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording Mode  
Maximum recording time on the supplied  
3 Set the [OFF/ON] Switch (43) to [ON].  
The Movie Camera will be ready for recording  
in approximately 1.7 seconds.  
Card (8 MB)  
[SUPERFINE]: approximately 1 minute  
[FINE]: approximately 2 minutes  
[NORMAL]: approximately 3 minutes  
[ECONOMY]: approximately 8 minutes  
These figures vary depending on the scene.  
To Cancel the Quick Start  
Keep the [QUICK START] Button pressed for  
approximately 2 seconds and make sure the  
Quick Start Recording Lamp is not lit.  
For other notes concerning this item, see -57-.  
For other notes concerning this item, see -57-.  
Self-timer Recording  
ª Recording Yourself  
By opening the LCD Monitor and rotating it  
frontward (to the lens side), you can let the  
subject in front of the Movie Camera monitor the  
shot while recording is in progress.  
When you set the self-timer, the recording starts  
automatically after 10 seconds on the Card.  
1 Set [TAPE RECORDING MENU] or  
[CARD RECORDING MENU] >> [CAMERA]  
>> [SELF TIMER] >> [ON].  
STILL  
ENTER  
s
i
FADE  
(14)  
MENU  
When the LCD Monitor is opened, the  
Viewfinder is disabled automatically. However,  
when the LCD Monitor is rotated frontward, the  
image is also shown in the Viewfinder.  
If you prefer to have the image on the LCD  
Monitor to look like an image in a mirror, set  
[SELF REC] on the [LCD/EVF] Sub-Menu to  
[MIRROR]. Images are recorded normally and  
no left and right reversal occurs.  
The [ ] Indication appears.  
2 Press the [PHOTO SHOT] Button (47).  
PHOTO  
SHOT  
(47)  
The Recording Lamp (27) and the [  
]
Indication flash and the recording starts after  
10 seconds.  
Quick Start  
By pressing the [QUICK START] Button (40), and  
the Movie Camera will be ready for recording in  
approximately 1.7 seconds after the Movie  
Camera is turned on.  
To cancel the Self-timer Recording while the  
[
] indicaton is blinking, press the [MENU]  
Button.  
You can also use the Continuous Photoshot.  
1 Press the [QUICK START] Button (40).  
The Quick Start Recording Lamp lights up.  
(-24-)  
For other notes concerning this item, see -57-.  
QUICK  
START  
Zoom In/Out Functions  
(40)  
It gives special effects to the picture by recording  
objects close by or with wide-angle shot.  
1 For wide-angle shots (zoom out):  
Push the [W/T] Lever (46) towards [W].  
For close-ups (zoom in):  
2 Set the [OFF/ON] Switch (43) to [OFF].  
The Quick Start Recording Lamp remains lit.  
Push the [W/T] Lever towards [T].  
ON  
VOL/JOG  
(46)  
(43)  
W
T
-25-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording Mode  
Zoom Magnification Indication is displayed for  
Set [TAPE RECORDING MENU] >>  
[RECORDING] >> [ZOOM MIC] >> [ON]. (The  
[Z.MIC] Indication is displayed.)  
a few seconds.  
T
1tW  
5tW  
T
10tW  
T
Z.MIC  
For other notes concerning this item, see -58-.  
ª To Take Close-up Shots of Small  
Subjects  
Digital Zoom Function  
(Macro Close-up Function)  
This function is useful when you want to record  
close-up shots of subjects located beyond a  
normal zoom range of 1k to 10k magnification.  
With the Digital Zoom Function, you can select a  
magnification from 20k up to 500k.  
1 Set [TAPE RECORDING MENU] >>  
[CAMERA] >> [D.ZOOM] >> [20k] or [500k].  
When the zoom magnification is 1k, the Movie  
Camera can focus on a subject that is as close as  
approximately 4 cm from the Lens. Small  
subjects like insects can be recorded with this  
function.  
ª To Use the Tele-Macro Function  
With the zoom magnification of 10k, the Movie  
Camera can bring the subject into focus as close  
as approximately 40 cm from the Lens. Focusing  
only on the subject and displaying the  
background out of focus makes the picture more  
impressive.  
STILL  
ENTER  
s
i
FADE  
(14)  
MENU  
1 Press the [TELE MACRO] Button (13).  
20k: Digital zooming to 20k  
500k: Digital zooming to 500k  
TELE  
(13)  
MACRO  
20tW  
T
D.ZOOM  
The zoom magnification is fixed at 10k and  
the subject can be focused on as close as  
approximately 40 cm.  
2 Push the [W/T] Lever (46) towards [W] or  
towards [T] to zoom in or out.  
The [ T.MACRO ] Indication appears.  
VOL/JOG  
(46)  
T.MACRO  
W
T
2 Press the Recording Start/Stop Button (42)  
or the [PHOTO SHOT] Button (47).  
To Cancel the Digital Zoom Function  
Set [TAPE RECORDING MENU] >> [CAMERA]  
>> [D.ZOOM] >> [OFF].  
PHOTO  
SHOT  
(47)  
For other notes concerning this item, see -58-.  
(42)  
Image Stabilizer Function  
If the Movie Camera is shaken while recording,  
the camera shake in the image can be corrected.  
If the Movie Camera shakes too much, the  
images may not be stabilized.  
To Cancel the Tele-Macro Function  
Press the [TELE MACRO] Button.  
ª To Use the Zoom Microphone  
Function  
Along with the zooming operation, the  
microphone’s directional angle and sensitivity are  
varied for recording sounds.  
-26-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording Mode  
1 Set [TAPE RECORDING MENU] >>  
[CAMERA] >> [SIS] >> [ON].  
2 When the image is completely gone, press  
the Recording Start/Stop Button (42) to  
start recording.  
STILL  
ENTER  
s
i
FADE  
(42)  
MENU  
(14)  
The [[] Indication appears.  
3 Release the [FADE] Button (18) about  
3 seconds after starting recording.  
The image reappears gradually.  
Fade Out  
Fade Out causes images and sounds to  
disappear gradually, leaving a black screen at the  
end of a scene.  
2 Press the Recording Start/Stop Button (42)  
or [PHOTO SHOT] Button (47) to start  
recording.  
PHOTO  
SHOT  
(47)  
(42)  
1 Keep pressing the [FADE] Button (18) while  
recording.  
To Cancel Image Stabilizer Function  
Set [TAPE RECORDING MENU] >> [CAMERA]  
>> [SIS] >> [OFF].  
STILL  
ENTER  
s
i
FADE  
(18)  
For other notes concerning this item, see -58-.  
The image fades out gradually.  
2 When the image is completely gone, press  
the Recording Start/Stop Button (42) to stop  
recording.  
Fade In/Out Functions  
Fade In  
Fade In brings out images and sounds gradually  
from a black screen at the beginning of a scene.  
(42)  
3 Release the [FADE] Button (18).  
1 Keep pressing the [FADE] Button (18)  
during the Recording Pause Mode.  
The still picture cannot fade in or fade out.  
Backlight Compensation Function  
STILL  
This prevents the subject from being recorded too  
darkly when backlit. (Backlight is the light that  
shines from behind the subject being recorded.)  
1 Press the [BACK LIGHT] Button (8).  
ENTER  
s
i
FADE  
(18)  
The image fades out gradually.  
BACK LIGHT  
(8)  
-27-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording Mode  
The screen becomes white and the  
The [ª] Indication flashes and then is  
displayed.  
Viewfinder turns on.  
The entire screen becomes brighter.  
The available range of the LCD Monitor light  
is within approximately 1.2 metre.  
ª
To Cancel the Night View Functions  
Press the [COLOUR NIGHT VIEW] Button  
repeatedly until neither the [C.NIGHT VIEW]  
Indication nor the [0LUX NIGHT VIEW] Indication  
appears.  
To Resume Normal Recording  
Press the [BACK LIGHT] Button.  
For other notes concerning this item, see -58-.  
For other notes concerning this item, see -58-.  
Soft Skin Function  
Night View Functions  
This enables you to record skin colours in a softer  
tone. In order to get the best result, avoid  
background colours similar to the skin colour of  
the subject. Otherwise, this may result in a softer  
background lacking in detail.  
Colour Night View Function  
This function allows you to record colour images  
brightly in a dark place without using the Video  
Flash.  
1 Press the [COLOUR NIGHT VIEW] Button  
(11) until the [C.NIGHT VIEW] Indication  
appears.  
1 Press the [SOFT SKIN] Button (12).  
(12)  
SOFT  
SKIN  
COLOUR  
(11)  
NIGHT  
VIEW  
SOFT SKIN  
The [  
] Indication appears.  
C.NIGHT  
VIEW  
SOFT SKIN  
To obtain the best effect, we recommend to  
take the bust shot, so that the upper part from  
the breast of the subject can be framed in the  
screen.  
0 Lux Night View Function  
Using the LCD Monitor light, a dark scene of  
almost 0 lux can be recorded.  
1 Press the [COLOUR NIGHT VIEW] Button  
(11) until the [0LUX NIGHT VIEW] Indication  
appears.  
To Cancel the Soft Skin Function  
Press the [SOFT SKIN] Button.  
Wind Noise Reduction Function  
C.NIGHT  
VIEW  
0
LUX  
NIGHT VIEW  
This function reduces the sound of wind hitting  
the microphone when recording.  
1 Set [TAPE RECORDING MENU] or  
[CARD RECORDING MENU] >>  
The [REVERSE THE LCD MONITOR]  
Indication appears.  
[RECORDING] >> [WIND CUT] >> [ON].  
2 Rotate the LCD Monitor frontward (to the  
lens side).  
STILL  
ENTER  
s
i
FADE  
(14)  
MENU  
The [WIND CUT] Indication appears.  
WIND CUT  
-28-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording Mode  
To Cancel the Wind Noise Reduction Function The Indication of the selected Mode appears.  
Set [TAPE RECORDING MENU] or  
[CARD RECORDING MENU] >> [RECORDING]  
>> [WIND CUT] >> [OFF].  
1)  
2)  
3)  
4)  
For other notes concerning this item, see -58-.  
Cinema Function  
5)  
This function is for recording in a cinema-like  
screen.  
1 Set [TAPE RECORDING MENU] >>  
1) [5] Sports Mode  
[RECORDING] >> [CINEMA] >> [ON].  
For recording scenes involving quick  
movements, such as sports scenes.  
2) [7] Portrait Mode  
STILL  
ENTER  
s
i
For bringing up people clearly from the  
background.  
FADE  
3) [4] Low Light Mode  
(14)  
MENU  
For recording a dark scene brighter.  
4) [] Spotlight Mode  
Black bars appear at the top and bottom of  
the screen.  
For recording a subject under a spotlight in  
a party, theatre, etc.  
5) [º] Surf & Snow Mode  
For recording in a glaring surrounding, such  
as ski slopes, beaches, etc.  
CINEMA  
To Cancel the Programme AE Function  
Set the [PROG.AE] on the [CAMERA] Sub-menu  
to [OFF]. Or, set the [AUTO/MANUAL/FOCUS]  
Switch to [AUTO].  
To Cancel the Cinema Mode  
Set [TAPE RECORDING MENU] >>  
[RECORDING] >> [CINEMA] >> [OFF].  
For other notes concerning this item, see -58-.  
For other notes concerning this item, see -58-.  
Recording in Natural Colours  
Recording in Special Situations  
(White Balance)  
(Programme AE)  
Depending on the scene or light condition, the  
Automatic White Balance Adjustment Mode may  
not be able to bring out natural colours. In this  
case, the white balance can be adjusted  
manually.  
You can select optimal automatic exposure under  
specific recording situations.  
1 Set the [AUTO/MANUAL/FOCUS] Switch  
(35) to [MANUAL].  
When the Movie Camera is turned on with the  
Lens Cap on, the Automatic White Balance  
Adjustment may not function properly. Please  
turn on the Movie Camera after removing the  
Lens Cap.  
AUTO MANUAL  
FOCUS  
(35)  
1 Set the [AUTO/MANUAL/FOCUS] Switch  
The [MNL] Indication appears.  
2 Set [TAPE RECORDING MENU] or  
[CARD RECORDING MENU] >> [CAMERA]  
>> [PROG.AE] >> a desired mode ([5],  
[7], [4], [] or [º]).  
(35) to [MANUAL].  
AUTO MANUAL  
FOCUS  
(35)  
STILL  
ENTER  
s
i
The [MNL] Indication appears.  
FADE  
(14)  
MENU  
-29-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording Mode  
2 Press the [ENTER] Button (17).  
1 Set the [AUTO/MANUAL/FOCUS] Switch  
(35) to [MANUAL].  
STILL  
AUTO MANUAL  
FOCUS  
(17)  
ENTER  
s
i
(35)  
FADE  
The [AWB] Indication appears.  
3 Press the [5] Button (16) or [6] Button  
(19) to select a desired White Balance  
Mode.  
The [MNL] Indication appears.  
2 Press the [ENTER] Button (17).  
1)  
2)  
1AWB  
1
STILL  
(17)  
ENTER  
s
i
3)  
4)  
FADE  
1
1
The [AWB] Indication appears.  
3 Press the [5] Button (16) or [6] Button  
1) Automatic White Balance Adjustment [AWB]  
2) The white balance setting that was previously  
set manually [1]  
3) Outdoor Mode [z]  
4) Indoor Mode (recording under incandescent  
lamp) [{]  
(19) until the [1] Indication is displayed.  
MNL  
1
To Resume Automatic Adjustment  
4 Point the Movie Camera at a full-screen  
white subject.  
5 Keep pressing [ENTER] Button (17) until the  
[1] Indication stops flashing.  
Press the [5] Button (16) or [6] Button (19)  
until the [AWB] Indication appears. Or, set the  
[AUTO/MANUAL/FOCUS] Switch to [AUTO].  
ª About Black Balance Adjustment  
Black Balance Adjustment is one of the functions  
of the 3CCD system. It automatically adjusts the  
hue of black color in the picture. When the Black  
Balance Adjustment is activated, the screen  
becomes dark for a moment.  
To Resume Automatic Adjustment  
Press the [5] Button (16) or [6] Button (19)  
until the [AWB] Indication is displayed. Or, set the  
[AUTO/MANUAL/FOCUS] Switch to [AUTO].  
ª About White Balance Sensor  
The White Balance Sensor (29) determines the  
nature of the light source during recording.  
1
2
3
1Adjusting the Black Balance (Blinking)  
2Adjusting the White Balance (Blinking)  
3Adjustment is completed. (Lighting)  
(27)  
(29)  
Do not cover the White Balance Sensor with  
your hand during recording because White  
Balance will not function normally.  
The red light from the Recording Lamp (27) will  
be reflected off your hand or object, possibly  
causing the White Balance sensor to operate  
incorrectly and changing the colouring.  
Adjusting White Balance Manually  
White Balance Adjustment recognizes the colour  
of light and adjust so that the white colour will  
become pure white. The Movie Camera  
determines the hue of light that comes through  
the Lens and White Balance Sensor, thereby  
judging the recording condition, and selects the  
closest hue setting. This function is called  
Automatic White Balance Adjustment.  
For light outside the functional Auto White  
Balance Adjustment range, use the Manual White  
Balance Adjustment Mode.  
-30-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording Mode  
2 Press the [ENTER] Button (17) until the  
Shutter Speed Indication appears.  
10 000K  
2)  
9
8
000K  
000K  
3)  
4)  
7
6
000K  
000K  
STILL  
(17)  
ENTER  
s
i
5)  
5
4
000K  
000K  
FADE  
6)  
7)  
8)  
1)  
MNL  
9)  
3
000K  
1/1000  
10)  
11)  
2
1
000K  
000K  
3 Press the [5] Button (16) or [6] Button  
(19) to adjust the shutter speed.  
Range of Shutter Speed Adjustment  
1/50–1/8000 s in Tape Recording Mode  
1/4–1/500 s in Card Recording Mode  
(NV-GS200)  
1/25–1/500 s in Card Recording Mode  
(NV-GS120)  
The standard shutter speed is 1/50 s.  
Selecting a speed closer to [1/8000] causes the  
shutter speed to be faster.  
12)  
Outside of the effective range of Automatic White  
Balance Adjustment, the image will become  
reddish or bluish. Even within the effective range  
of Automatic White Balance Adjustment, the  
Automatic White Balance Adjustment may not  
function properly if there is more than one light  
source. In this case, adjust the White Balance.  
1) The effective range of Automatic White  
Balance Adjustment on this Movie Camera  
2) Blue sky  
To Resume Automatic Adjustment  
Set the [AUTO/MANUAL/FOCUS] Switch to  
[AUTO].  
3) Cloudy sky (rain)  
4) TV screen  
5) Sunlight  
ª About the Card Slow Shutter  
(NV-GS200 only)  
When you adjust the shutter speed to 1/4, 1/6 or  
1/12 in Card Recording Mode, the Card Slow  
Shutter Mode is activated.  
The Slow Shutter Mode is cancelled and the  
shutter speed is set to 1/25, when the [OFF/ON]  
Switch or the Mode Dial is operated.  
In the Slow Shutter Mode:  
6) White fluorescent lamp  
7) 2 hours after sunrise or before sunset  
8) 1 hour after sunrise or before sunset  
9) Halogen light bulb  
10) Incandescent light bulb  
11) Sunrise or sunset  
12) Candlelight  
the White Balance cannot be changed.  
the Movie Camera focuses on the subject  
manually.  
When you set the [AUTO/MANUAL/FOCUS]  
Switch to [FOCUS], the shutter speed is  
automatically set to 1/50 and then turned to the  
previous shutter speed. [MF] blinks while the  
subject is focused.  
For other notes concerning this item, see -59-.  
Manual Shutter Speed Adjustment  
Useful for recording fast-moving subjects.  
1 Set the [AUTO/MANUAL/FOCUS] Switch  
(35) to [MANUAL].  
AUTO MANUAL  
FOCUS  
(35)  
The [MNL] Indication appears.  
For other notes concerning this item, see -59-.  
-31-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording Mode  
2 Slide the [AUTO/MANUAL/FOCUS] Switch  
(35) to [FOCUS].  
Manual Iris Adjustment  
(F Number)  
You can use this function when the screen is too  
bright or too dark.  
1 Set the [AUTO/MANUAL/FOCUS] Switch  
(35) to [MANUAL].  
AUTO MANUAL  
FOCUS  
(35)  
AUTO MANUAL  
FOCUS  
The [MF] Indication (Manual Focus Mode)  
appears. (NV-GS200)  
(35)  
The [1MF] Indication (Manual Focus Mode)  
appears. (NV-GS120)  
The [MNL] Indication appears.  
2 Press the [ENTER] Button (17) until the Iris  
Indication appears.  
MNL  
MF  
MNL  
MF  
NV-GS200  
NV-GS120  
STILL  
3 (NV-GS200)  
(17)  
ENTER  
s
i
Turn the Focus Ring (24) to adjust the  
FADE  
focus.  
MNL  
1/50  
F2.0  
0dB  
(24)  
3 Press the [5] Button (16) or [6] Button  
(19) to adjust the iris.  
Range of Iris Adjustment  
(NV-GS120)  
Press the [5] Button (16) or [6] Button  
(19) to adjust the focus.  
CLOSE (Closed), F16, ..., F2.0,  
OPEN (Opened) 0dB, ..., 18dB  
When a value closer to [CLOSE] is selected, the  
image becomes darker.  
STILL  
When a value closer to [18dB] is selected, the  
image becomes brighter.  
ENTER  
s
i
FADE  
The value to which dB is attached indicates a  
Gain-up value. If this value is too large, the quality  
of the image deteriorates.  
(19)  
(16)  
If you keep pressing the [5] Button or [6]  
Button, the speed of adjusting becomes  
faster.  
To Resume Automatic Adjustment  
Set the [AUTO/MANUAL/FOCUS] Switch to  
[AUTO].  
To Resume Automatic Adjustment  
Set the [AUTO/MANUAL/FOCUS] Switch to  
[AUTO] or [FOCUS].  
For other notes concerning this item, see -59-.  
Manual Focus Adjustment  
Focus can be adjusted manually for recording in  
a situation where auto focus may not function  
well.  
1 Set the [AUTO/MANUAL/FOCUS] Switch  
(35) to [MANUAL].  
AUTO MANUAL  
FOCUS  
(35)  
The [MNL] Indication appears.  
-32-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording Mode  
For other notes concerning this item, see -59-.  
Using the Built-in Video Flash  
(NV-GS200 only)  
Red Eye Reduction Function  
The Built-in Video Flash enables you to record  
still pictures in a dark place. The Video Flash  
lights twice to detect the surrounding luminosity  
and to light properly.  
1 Set [TAPE RECORDING MENU] or  
[CARD RECORDING MENU] >> [CAMERA]  
>> [FLASH] >> [ON] or [AUTO].  
This function reduces a phenomenon which  
causes the subject’s eyes to turn red when you  
record pictures with a flash such as built-in Video  
Flash or Video Flash VW-FLH3E (optional).  
(Built-in Video Flash on NV-GS200 Model only)  
1 Set [TAPE RECORDING MENU] or  
[CARD RECORDING MENU] >> [CAMERA]  
>> [RED EYE] >> [ON].  
STILL  
ENTER  
s
i
STILL  
FADE  
ENTER  
s
i
FADE  
(14)  
MENU  
(14)  
MENU  
If [AUTO] is selected, the Video Flash can be  
lighted if light is needed by sensing the  
surrounding luminosity.  
The [£] Indication appears.  
2 Slide the [ßL] Lever (21).  
To Cancel the Red Eye Reduction Function  
Set [TAPE RECORDING MENU] or  
[CARD RECORDING MENU] >> [CAMERA] >>  
[RED EYE] >> [OFF].  
(21)  
The Video Flash pops up.  
3 Press the [STILL] Button (15).  
For other notes concerning this item, see -60-.  
(15)  
STILL  
Digital Effect Functions  
ENTER  
s
i
FADE  
This Movie Camera is equipped with Digital Effect  
Functions that add special effects to the scene.  
Video Flash is lighted and the image  
becomes still.  
4 Press the [PHOTO SHOT] Button (47) or  
Recording Start/Stop Button (42).  
Digital Effects 1 [EFFECT1]  
1) MULTI  
2) P-IN-P  
3) WIPE  
PHOTO  
SHOT  
(47)  
4) MIX  
5) STROBE  
6) TRAIL  
(42)  
Video Flash is not lighted when recording.  
7) MOSAIC  
10) SLIM  
8) MIRROR  
9) STRETCH  
Adjusting Brightness of the Video Flash  
Set [TAPE RECORDING MENU] or  
[CARD RECORDING MENU] >> [CAMERA] >>  
[FLASH LEVEL] >> a desired Flash Level.  
Normally, set it to [NORMAL]. (The [ß]  
Indication appears.)  
If the brightness is not enough in [NORMAL]  
setting, set it to [i] (the [ßi] Indication  
appears), if it is too much, set it to [j] (the [ßj]  
Indication appears).  
1) Multi Mode [MULTI]  
2) Picture-In-Picture Mode [P-IN-P]  
3) Wipe Mode [WIPE]  
4) Mix Mode [MIX]  
-33-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording Mode  
5) Strobe Mode [STROBE]  
Manual Multi-Picture Mode:  
It records images with a stroboscopic effect.  
6) Trailing Effect Mode [TRAIL]  
It records images with a trailing effect.  
7) Mosaic Mode [MOSAIC]  
It produces a mosaic-like image.  
8) Mirror Mode [MIRROR]  
The right half of an image becomes a mirror  
image of the left half.  
9) Stretch Mode [STRETCH]  
You can manually capture and record 9 small still  
pictures.  
1 Set [TAPE RECORDING MENU] >>  
[DIGITAL] >> [EFFECT1] >> [MULTI].  
The Picture is expanded horizontally.  
10) Slim Mode [SLIM]  
STILL  
ENTER  
The picture is expanded vertically.  
s
i
FADE  
Digital Effects 2 [EFFECT2]  
12) SEPIA  
11) NEGA  
(14)  
MENU  
2 Set [TAPE RECORDING MENU] >>  
[DIGITAL] >> [MULTI MODE] >> [STROBE]  
or [MANUAL].  
14) SOLARI  
13) B/W  
3 Press the [MULTI] Button (10).  
MULTI/  
11) Negative Mode [NEGA]  
(10)  
P-IN-P  
The colours of the recorded image are  
inverted as seen in a negative.  
12) Sepia Mode [SEPIA]  
If [MANUAL] is selected, press the [MULTI]  
Button at each scene you want to capture.  
It records a scene with a brownish tint, like  
the colour of old pictures.  
Deleting All the Captured Multi-Pictures  
While 9 multi-pictures are displayed, press the  
[MULTI] Button.  
If [MANUAL] has been selected, press the  
[MULTI] Button after 9 pictures are displayed.  
13) Black & White Mode [B/W]  
It records an image in black and white.  
14) Solarisation Mode [SOLARI]  
It records an image with a painting-like  
effect.  
To Display the Multi-Pictures Again  
Press the [MULTI] Button for 1 second or longer.  
To Select a Desired Digital Effect  
Set [TAPE RECORDING MENU] >> [DIGITAL]  
>> [EFFECT1] or [EFFECT2] >> a desired Digital  
Effect.  
To Delete Multi-Pictures One by One  
(When pictures were captured in [MANUAL])  
When the [MULTI] Button is pressed for 1 second  
or longer while the still pictures are displayed, the  
pictures captured last is deleted continuously.  
After still pictures are deleted one by one, they  
cannot be displayed again.  
To Cancel the Digital Effect  
Set [TAPE RECORDING MENU] >> [DIGITAL]  
>> [EFFECT1] or [EFFECT2] >> [OFF].  
If the Movie Camera is turned off, the  
[EFFECT2] settings are cancelled.  
For other notes concerning this item, see -60-.  
For other notes concerning this item, see -60-.  
ª Picture-in-Picture Mode  
ª Multi-Picture Mode  
Strobe Multi-Picture Mode:  
You can display a sub-screen (still picture) inside  
the screen.  
You can capture and record 9 consecutive small  
still pictures.  
-34-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording Mode  
1 Set [TAPE RECORDING MENU] >>  
[DIGITAL] >> [EFFECT1] >> [P-IN-P].  
2 Press the Recording Start/Stop Button (42)  
to start recording.  
STILL  
ENTER  
s
i
FADE  
(42)  
MENU  
(14)  
3 Press the Recording Start/Stop Button (42)  
to pause the recording.  
The last scene is stored in memory. The  
[WIPE] or [MIX] Indication changes to [B]  
or [C].  
2 Aim the Movie Camera at the scene you  
want to capture and press the [P-IN-P]  
Button (10) to insert a small still picture.  
4 Press the Recording Start/Stop Button (42)  
to restart the recording.  
The last image of the previous scene  
gradually changes to the new scene.  
MULTI/  
(10)  
P-IN-P  
A small still picture is displayed in a normal  
picture.  
For other notes concerning this item, see -60-.  
If the [P-IN-P] Button is pressed again, the  
small still picture is cleared.  
For other notes concerning this item, see -60-.  
ª Wipe Mode and Mix Mode  
Wipe Mode:  
Like drawing a curtain, the still picture of the last  
recorded scene gradually changes to the moving  
image of a new scene.  
WIPE  
WIPE  
WIPE  
Mix Mode:  
While the moving image of a new scene fades in,  
the still image of the last recorded scene  
gradually fades out.  
MIX  
MIX  
MIX  
1 Set [TAPE RECORDING MENU] >>  
[DIGITAL] >> [EFFECT1] >> [WIPE] or [MIX].  
STILL  
ENTER  
s
i
FADE  
(14)  
MENU  
The [WIPE] or [MIX] Indication appears.  
-35-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback Mode  
ª Adjusting the Sound Volume  
Playback Mode  
Playing Back a Tape  
To adjust the volume, push the [`VOL/JOG_]  
Lever (46) to display the [VOLUME] Indication.  
Push the [`VOL/JOG_] Lever towards [T] to  
increase the volume or push the [`VOL/JOG_]  
Lever towards [W] to decrease the volume. The  
[VOLUME] Indication goes off after the  
adjustment is finished.  
The recorded scene can be played back  
immediately after the recording.  
1 Set the [OFF/ON] Switch (43) to [ON].  
The Power Lamp (41) lights up.  
(41)  
VOL/JOG  
ON  
W
T
(46)  
(43)  
2 Set the Mode Dial (39) to Tape Playback  
Mode.  
To adjust the volume with the Remote Controller,  
press the [T] or [W] Button to display the  
[VOLUME] Indication. Press the [T] Button to  
increase the volume or press the [W] Button to  
decrease the volume. The [VOLUME] Indication  
goes off after the adjustment is finished.  
(39)  
3 Press the [6] Button (19) to rewind the  
tape.  
The sound volume cannot be adjusted using the  
Remote Controller in Playback Zoom Mode.  
(-38-)  
STILL  
(19)  
ENTER  
FADE  
s
i
For other notes concerning this item, see -60-.  
Rewind the tape to the point where you want  
to start playback.  
When the tape reaches the beginning,  
rewinding stops automatically.  
Finding a Scene You Want to Play  
Back  
4 Press the [1] Button (17) to start playback.  
The [!] Indication appears.  
ª Cue/Review Playback  
STILL  
STILL  
ENTER  
s
i
(17)  
ENTER  
s
i
FADE  
FADE  
(19)  
(16)  
If the [5] Button (16) or [6] Button (19) is  
pressed during Playback, it turns to Cue Playback  
A or Review Playback B.  
If a cassette recorded with a copyright  
protection signal is played back, the picture is  
distorted by mosaic-like patterns.  
To Stop Playback  
A
B
Press the [] Button (18).  
STILL  
If the Button is held continuously, it turns to Cue  
Playback or Review Playback until you release  
it.  
ENTER  
s
i
(18)  
FADE  
ª Variable Speed Search Function  
The speed of Cue Playback or Review Playback  
can be varied.  
1 During playback, press the [1] Button (17).  
-36-  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pelco Security Camera 2 C1696M A 7 08 User Manual
Philips CD Player 170V6 User Manual
Philips Clock Radio AJ 3720 User Manual
Philips Stereo Amplifier BGY86 User Manual
Philips Stereo System FW C38C 37 User Manual
Philips Universal Remote SRU3006L 27 User Manual
Philips VCR VRZ264AT User Manual
Pioneer DVD Recorder DVD U02 User Manual
Porter Cable Portable CD Player AZ1203 User Manual
Power Acoustik Speaker STW 10 STW 12 User Manual