Philips Model US-24ST2200/27
Back of the TV.
These connections are not functional
Component Video Input
This connection is the best method for
connecting your periferals
MONITOR OUTPUT
This connection is used to monitor the
channel you are watching. Usually
connected to a VCR or recording type
device. May power an additional display.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote (RC2888/01) Control Keys
CH Guide
On this model Channel Guide
does not function
Source Select
Standby
Press to switch
the TV off.
To toggle between
available video sources
DVD PAUSE
Not functional on this model
DVD PLAY
Not functional on this model
DVD Rewind
Not functional on this model
Close Caption
To activate Close
Caption functionality
DVD FAST
FORWARD
Not functional on this model
DVD STOP
Not functional on this model
Smart Keys
Not functional on this model
Menu
To call up or exit the
menus.
Sleep
Activates the sleep timer. Press repeatedly
to increment the countdown time with 15
minutes.
+ Vol -
To adjust the volume.
Mute
Interrupt the sound or
restore it.
+ CH – Channel
Selection
To move up or down a TV
channel.
0/9 Digit keys
To select a TV channel.
For a two digit program
number, enter the second
digit before the dash
appears.
Alternate Channel
To toggle between
alternating channels
16:9 Formats
Not functional on this model
3
Download from Www.Somanuals.com. All Manuals Search And Download.
LANGUAGE (English / Espanol / Francais)
When you first enter the TV SETUP menu, LANGUAGE is highlighted. You can scroll to
the LANGUAGE item. Select the desired language with cursor right / cursor left.
CHANNEL INSTALL(>)
The CHANNEL INSTALL menu allows the user to configure the channels that can be
accessed. When installing the channels, different inputs can be mapped to TV channels to
allow seamless integration into the channel map.
Installing channels
• AUTO INSTALL TV:
When AUTO INSTALL TV is selected (cursor right), the TV performs an automatic
search for the presence of viable RF signals at its tuner input. An AUTO-
PROGRAMMING ACTIVE message and a table of channel numbers will appear.
When a viable signal is detected on a given channel, that channel is highlighted in red
and is added to the channel ring. Any command from a remote control terminates the
AUTO PROGRAM session. Front-panel commands do not cancel auto-programming.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CABLE TUNING: If CABLE TUNING is set to NO, channels 2 through 69 are available.
If CABLE TUNING is set to YES, channels 2 through 125 will be available.
BRIGHTNESS / COLOR / CONTRAST / SHARPNESS / TINT
( 0 - 63, TINT -31 - 31)
Adjust the respective picture setting, using left and right cursor.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
NOISE REDUCTION
(NO / YES)
Disable or enable the video noise reduction feature, in which video noise is reduced, with
minimum reduction in picture sharpness.
SOUND MODE (MONO / STEREO)
Select either STEREO or MONO (monaural) sound modes. Note: STEREO has no effect if
the current audio signal is monaural. When SOUND MODE is changed, an on-screen
display will appear, indicating the actual audio status (MONO or STEREO)
SAP (OFF / ON)
Disable or enable the Second Audio Program channel feature. SAP is not in wide use, and
most channels do not transmit a SAP signal. Uses of the SAP channel include:
- Spanish translation or other language translation
- Descriptive information about the program
- Duplication of main audio (mono)
- Audio unrelated to the program.
Note: When SAP is ON, but SAP is not present on the current channel / input, the primary
audio will be audible.
AVL (OFF / ON)
Disable or enable the Automatic Volume Leveling feature, which minimizes variations in
audio playback level.
BALANCE / TREBLE / BASS ( 0 - 63, BALANCE -31 - 31)
Adjust the respective audio playback setting.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
INCREDIBLE STEREO (NO / YES)
When INCREDIBLE STEREO is set to YES, and the current SOUND MODE is MONO, a
signal processing technique is applied for the purpose of simulating a “stereo-like” effect.
Note: When INCREDIBLE STEREO is set to YES, and the current SOUND MODE is
STEREO (regardless of whether there is a stereo signal on the current channel) the
resultant effect will be imperceptible, minimal or possibly degraded, depending upon
various factors.
ULTRA BASS (NO / YES)
When ULTRA BASS is set to YES, the audio frequency equalization is modified such that
the bass frequencies are significantly emphasized.
VOLUME BAR (NO / YES)
When VOLUME BAR is set to YES, an OSD graphic appears that provides visual
verification ( e.g. “||||||----- 15”) during volume adjustment, by means of either the remote
control, or the front panel.
AUDIO/VIDEO OUT MUTE (NO / YES)
When set to YES, turns off the audio and video MONITOR OUT signals (either
demodulated RF input or loop-through video).
REMINDER (NO / YES)
When REMINDER = YES, the reminder feature provides a constant on-screen indication
of the current channel or input, (e.g., TV 2, CVI, etc.), that channel’s or input’s label (if a
label has been assigned in CHANNEL INSTALL), and the current MUTE status (i.e., if
sound MUTE is active). The REMINDER on-screen indication appears near the top of TV
screen viewing area. When REMINDER = NO, the reminder information appears only
when the channel or input is changed, then disappears after approximately ten seconds.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CC (OFF / CC-1 / CC-2 / CC ON MUTE)
Closed Captioning. Since July 1, 1993, television sets with 13" screens or larger must have
built-in caption decoders. Captioning of most broadcast and cablecast programming is
mandated under the Telecommunications Act of 1996, except for certain types of programs
exempted by the FCC. For additional information, please visit the U.S. FCC web site at
there is a closed captioning signal present on the current source, closed captioning will not
appear.
CC-1: CC-1-mode closed captioning will be displayed if it is present on the incoming
signal.
CC-2: CC-2-mode closed captioning will be displayed if it is present on the incoming
signal.
CC ON MUTE: If the television is in audio mute mode, CC-1-mode closed captioning will
be displayed if it is present on the incoming signal.
Note: When the television is powered down and back on again, the closed captioning
setting will default to OFF.
SAVED V-CHIP (NO / YES)
This feature provides the option to specify whether the current V-CHIP SETUP
configuration remains in effect after television is powered down.
NO: The current V-CHIP setup configuration reverts to defaults when the television is
powered down.
YES: The current V-CHIP setup configuration remains in effect when the television is
powered down.
V-CHIP SETUP (>)
Configures the V-CHIP program content viewing restriction feature. Please consult the
mainstream / consumer product documentation for information about this feature.
NO: The current V-CHIP setup configuration reverts to defaults when the television is
powered down.
YES: The current V-CHIP setup configuration remains in effect when the television is
powered down.
SLEEPTIMER (OFF / 15 MIN / 30 MIN / 45 MIN / 60 MIN / 90 MIN / 120 MIN / 180
MIN / 240 MIN)
Activates the SLEEPTIMER feature, in which the television powers down automatically
after the specified period of time.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
|