00/COVER 12T 09-08-1999 12:54 Pagina 1
Audio CD Recorder
CDR570
Instructions for use
•
Mode d'emploi
•
Instrucciones de manejo
•
Bedienungsanleitung
•
Gebruiksaanwijzing
•
Istruzioni per l'uso
•
Brugsanvisning
•
Bruksanvisning
•
Käyttöohje
•
Manual de utilização
•
O‰ËÁ›Â˜ ¯Ú‹Ûˆ˜
•
Instrukcja obs¬ugi
•
ERASE
FINALIZE
REC TYPE
MENU
SCROLL
SOURCE
CANCEL
DISPLA
Y
RECORD
PLA
Y/P
AUSE
STOP
1
2
3
4
5
6
7
8
9
10
11
DIGITAL
OPTICAL
ANALOG
I
I
CDR
MINI CD RECORDER
REWIND
FFWD
ON/OFF
EASY JOG
OPEN/CLOSE
Recordable
ERASE
ENTER
Download from Www.Somanuals.com. All Manuals Search And Download.
00/COVER 12T 09-08-1999 12:54 Pagina 3
CONTENTS
English ....................................................5
Français.................................................27
Español .................................................49
Deutsch.................................................71
Nederlands ...........................................93
Italiano................................................115
Svenska...............................................137
Dansk..................................................159
Suomi..................................................181
Português............................................203
ŒÏÏËÓÈο .........................................225
Polski...................................................247
3
Download from Www.Somanuals.com. All Manuals Search And Download.
00/COVER 12T 09-08-1999 12:54 Pagina 4
NOTES
4
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Table of contents
GENERAL INFORMATION AND DISCS
Welcome ......................................................................6
About this manual........................................................6
Technical data ..............................................................6
Discs for recording.......................................................7
Discs for playback........................................................7
Maintenance ................................................................7
Accessories .................................................................7
CONTROLS AND CONNECTIONS
Controls on the front....................................................8
Connections at the back ..............................................8
DISPLAY
DISPLAY indications.....................................................9
DISPLAY messages ......................................................9
MENU messages........................................................10
INSTALLATION
Connections general ..................................................11
Analog connections ..................................................11
Digital coaxial connections .......................................12
Digital optical connections .......................................12
Power supply..............................................................13
Setup recommendations............................................13
Inserting batteries in the remote control ..................13
REMOTE CONTROL
Remote control commands ........................................14
Inserting discs............................................................14
RECORDING
Remarks about recording...........................................15
Recording modes........................................................15
Autostart recording....................................................16
Manual recording.......................................................17
Finalizing CDR & CDRW discs ...................................18
Unfinalizing CDRW discs ...........................................18
Erasing CDRW discs ..................................................19
PLAYING
Playing a CD...............................................................20
Selecting a track ........................................................20
Search ........................................................................20
Shuffle (random order) play.......................................21
Repeat CD, track or program .....................................21
PROGRAMMING
Remarks about programming.....................................21
MENU MODE
Remarks about Menu mode.......................................22
Text settings...............................................................23
Recording settings .....................................................24
FIXING PROBLEMS
Troubleshooting..........................................................25
5
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL INFORMATION
Welcome !
Thank you for buying this Philips Compact Disc Recorder.
In the eighties Philips invented a new audio system - the CD.
The CD (compact disc) revealed to you the new dimensions of
digital sounds and added to the pleasures of audio.
Compact disc technology permits a high contrast in loud as
well as in quiet passages, with perfect channel separation.
Philips has now further developed compact disc technology
and the result is the CD recorder.
With your Philips CD Recordable/ReWritable Recorder, you
can record, play and erase your own high-quality audio CDs,
subject to legal restrictions on copying. Naturally, you will
also be able to play all pre-recorded audio CDs.
Note: In the United Kingdom and certain commonwealth
countries use of the Philips CD Recordable/Rewritable
recorder as shown or suggested in this user manual
may require the authorization of copyright holders.
Technical data
About this manual
Subject to modification without notice.
This manual gives instructions for operating this CD recorder
where:
General
- the figures (1) throughout the text indicate a sequence of
actions necessary to perform a certain operation;
- the arrows (➜) indicate the reaction from the recorder;
- the dots (•) indicate remarks, advice or special options
within a sequence of actions. The dot-marked instructions
are not necessary for the required operation.
Power consumption ..........................................................15 W
Power consumption in Standby ..........................................6 W
Operating temperature ..................................................5-35° C
Weight..................................................................................4 kg
Dimensions ..................................................264 x 305 x 86 mm
Audio
Frequency response ............................................2Hz-22.050 Hz
Playback S/N (A-weighted) ............................................100 dB
Playback S/N.................................................................. 100 dB
Playback dynamic range CDR............................................95 dB
Playback total harmonic distortion CDR........91 dB = 0.0033 %
Channel separation ........................................................100 dB
Recording S/N (A-weighted) ............................................98 dB
Recording S/N digital without SRC ..................equal to source
Recording dynamic range..................................................92 dB
Recording total harmonic distortion + noise ..85 dB (0.0056%)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL INFORMATION AND DISCS
Discs for recording
Maintenance
For recording use, special audio discs must be used (for music
only). These Discs bear the logos as shown below. The text
‘DIGITAL AUDIO’ is present!
For recording it is very important to use dust and scratch free
discs.
To clean a CD, wipe it in a straight
line from the center toward the edge
using a soft, lint-free cloth. A
cleaning agent may damage the disc!
Write only on the printed side of a
CDR or CDRW, and only with a soft
felt-tipped pen.
Your recorder uses two types of discs for recording purposes:
- CD-Audio Recordable (CDR) discs:
fully recorded and finalized, these discs play
on all CD players and recorders.
Recordable
- CD-Audio ReWritable (CDRW) discs:
can be recorded, erased and re-recorded
hunderds of times. When finalized, they play
on CDRW compatible CD players and
recorders. In the course of 1999 most Philips CD players and
recorders will be CDRW compatible.
Clean the CD recorder with
a soft, slightly dampened lint-free
cloth. Do not use any cleaning
agents as they may have a corrosive
effect.
ReWritable
To ensure proper working of the set we recommend the use of
Philips audio CDR and audio CDRW discs only.
Do not expose the CD recorder,
batteries or CDs to humidity, rain,
sand or excessive heat (caused by
INPUT
AUTO
DISPLA
Y
Discs for playback
/
MAN
UAL
FINALIZE
ERASE
CD SYNCRO
RECORD
STOP
PLA
Y
PA
USE
CDR
5
60
M
IN
I
C
D
R
EC
O
RD
ER
PREV
P
O
W
E
R
O
N
/
O
NEXT
FF
heating equipment or direct sunlight).
R
E
C
O
R
D
L
E
V
OPEN/CLOSE
EL
MIN
MAX
Your CD recorder is able to play:
If the CD recorder cannot read CDs correctly use a commonly
available cleaning CD to clean the lens before taking the CD
player to be repaired. Other cleaning methods may destroy
the lens. Always keep the tray closed to avoid dust on the
lens.
- All pre-recorded audio CDs.
- All Audio CDR and Audio CDRW.
Note: CDR(W) discs recorded with a computer can only be
used when they are correctly treated according the
audio standard (IEC958: Consumer part).
Single session only!
The lenses may cloud over when the CD recorder is suddenly
moved from cold to warm surroundings. It is not possible to
play a CD then. Leave the CD recorder in a warm environment
until the moisture evaporates.
Accessories
- 2 Analog audio cables (with red and white plugs)
- 1 Digital coaxial cable (with black plugs)
- Power cord
- 2 Batteries
- Remote control
- Guarantee
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND CONNECTIONS
5
6
7
8
9
10 19 11 12 13 14 15 16 17 18
4
3
2
ERASE
FINALIZE
REM
1
REC
TIME
TRACK
TOTAL
REM
13
TRACK
TIME
SCROLL
REC TYPE
STEP
SOURCE
CANCEL
DISPLA
Y
RECORD
PLA
Y/P
AUSE
STOP
2
3
4
5
6
7
8
9
10
11
12
DIGITAL
OPTICAL
ANALOG
14
15
I
I
16
CDR
MINI AUDIO
CD RECORDER
17
18
19
20
PROGRAM
RW
+
CD
MENU/STORE
MANUAL
SHUFFLE
SYNC
REPEAT
SCAN
TRACK
REWIND
ALL
FFWD
ON/OFF
EASY JOG
OPEN/CLOSE
Recordable
1
ENTER
L
R
L
R
MAINS
IN
ANALOG
OUT
IN
DIGITAL
OUT
IN
OPTICAL
1
2
3
4
5
6
ENTER (push) ..............- plays selected tracks
- selects settings in Menu mode
- programs track numbers
Controls on the front
1 ON/OFF........................turns the CD recorder ON and OFF
2 Disc tray
( OPEN/CLOSE /..........opens/closes disc tray
3 SCROLL........................activates scrolling of text over the
display (once)
Note: Unless stated otherwise, all controls are on the front of
the CD recorder. When provided on the remote control,
you can also use the corresponding buttons, after
selecting the CD recorder or separate CD player by
pressing CDR or CD.
4 DISPLAY......................selects display information/text
5 ERASE..........................selects erasing mode
6 FINALIZE ....................selects finalize mode
7 Standby indicator
8 Display..........................information screen
9 CANCEL/DELETE ......- deletes tracks from a program
- deletes text in Menu mode
Connections at the back
- returns to a higher level in the
menu
0 SOURCE ......................selects input source
! STORE/MENU ............- enters Menu mode
- stores Menu settings
1 Connection to mains
2 ANALOG IN ................connects to the line output of an
amplifier (left and right)
@ REC(ord) TYPE ............selects recording modes
# RECORD ......................starts recording, finalizing, erasing
$ Q(Rewind)..............- searches backward
- cursor control in Menu/Prog.
3 ANALOG OUT CDR....connects to the line input of an
amplifier (left and right)
4 DIGITAL IN..................connects to the digital coaxial
output of an external CD player
5 DIGITAL OUT CDR ....connects to the digital coaxial
input of e.g. amplifier or recording
review mode
% PLAY/PAUSE 2; ......starts play/interrupts play or
recording
device
^ STOP 9........................stops/clears a program
& R(FFwd)..................- searches forward
- cursor control in Menu/Prog.
6 OPTICAL IN ................connects to the digital optical
output of an external CD player
review mode
* ¡EASY JOG ™ ........- previous/next track (Play and
(rotate)
Program mode)
- recording level control (recording)
- selects settings (menu on)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY
DISPLAY indications
DISPLAY messages
Messages, as listed and explained here, may appear on the
display for your guidance.
1
2
3
4
5
6
REM
REC
TIME TRACK
TOTAL REM TRACK TIME
FADE
STEP
General
7
8
9
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20
+
READING..........................reading disc information
OPEN..................................during tray opening
CLOSE ..............................during tray closing
NO DISC..........................no disc inserted, disc unreadable
or disc inserted upside down
24
23
22
DIGITAL
OPTICAL
ANALOG
I
I
PROGRAM
RW
MANUAL SYNC
SHUFFLE REPEAT TRACK ALL
SCAN
CD
21 20 19 18 17 16 15
14
13 12 11
10
PROG FULL....................program full
INSERT DISC ..............insert disc or insert disc in correct
way
WRONG DISC..................inserted disc is no audio CD
UNFINALIZED ..............unfinalized CDR(W) disc
MEMORY XXù............indicates the amount of text
memory used for unfinalized discs
1 REM/REC TIME ..........remaining recording time /
recording time
2 TRACK ........................track number
3 FE......................balance (lights during balance
adjustement)
4 TOTAL REM
TRACK TIME ..............total or remaining time of disc or
track
5 }................................remote control active
6 STEP ............................indicates the number of tracks in a
program
Recording
WAIT..................................- when STOP 9is pressed during
recording
- when STOP 9is pressed during
recording the first 4 seconds of a
track
7 Track bar ....................indicates:
- tracks on a disc or in a program
- track in play
8 + 20 ..............................disc or program contains more
UPDATE ..........................updating disc contents
DISC FULL....................no more recording possible
DIGITAL 1....................digital coaxial input 1 selected
OPTICAL ........................digital optical input selected
ANALOG............................analog input selected
COPY PROTECT............no digital recording can be made
of the connected source
NOTFINALIZED............when opening the tray with an
unfinalized disc inserted
MAKE CD..........................start of synchronized recording of
a complete disc and Auto Finalize
than 20 tracks
9 SCAN ..........................lights up when the first 10
seconds of each track are played
0 REPEAT TRACK/ALL..lights up when a track/ complete
disc (or program) is repeated
! SYNC ..........................synchronized recording active
@ SHUFFLE ALL..............plays tracks in random order
# MANUAL ....................manual recording active
$ L/R ; ;........................Record/play level bar, indicates
the audio signal level
function selected
RECORD DISC ..............start of synchronized recording of
a complete disc
RECORD TRACK............start of synchronized recording of
a single track
REC MANUAL..................manual start of recording selected
_XX DB............................level is being adjusted
ERASE TRACK ..............when erasing one or more tracks
ERASE DISC..................when erasing a disc
FINALIZE ......................when finalizing a disc
FINALIZED....................when trying to finalize an already
finalized disc
% PROGRAM ..................flashes during programming/ lights
in program mode
^ ;....................................pause function active
& B ................................lights during play
* 0..................................lights during recording
( R(W) ............................unfinalized CDR(W) disc inserted
) CD ................................CD inserted (a pre-recorded CD or
finalized CDR or CDRW disc)
¡ d................................lights during recording
™ ANALOG a ..............analog input selected
£ OPTICAL I p ............optical input I selected for external
recording
CHECK INPUT ..............when RECORD is pressed while no
digital source is detected
XX XX ERASE................time countdown when erasing a
track or a disc
≤ DIGITAL I d..............digital input I selected for external
recording
XX XX FINAL................time countdown when finalizing a
disc
PRESS RECORD............to start manual recording,
finalizing or erasing
START SOURCE............to start synchronised recording
from a source
9
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY
FINALIZED CD............when trying to record on a
finalized CDR or a prerecorded CD
MENU messages - See Menu mode
UNFINALIZE/ ................when trying to record on a
PRESS ENTER
finalized CDRW
CANCEL
MENU/STORE
REM
REC
TIME TRACK
TOTAL REM TRACK TIME
FADE
STEP
REWIND
FFWD
PROF SOURCE ..............when a professional source is
EASY JOG
OPEN/CLOSE
connected
1
2
3
4
5
6
7
8
9
10 11
DIGITAL
OPTICAL
ANALOG
I
I
PROGRAM
RW
MANUAL SYNC
SHUFFLE REPEAT TRACK ALL
SCAN
ENTER
CD
Play
PROGRAM..........................program mode selected
ALBUM TITLE ..............will be followed by album title
TRACK TITLE ..............will be followed by track title
ALBUM ARTIST............will be followed by artist name
TRACK ARTIST............will be followed by track artist
name
Menu messages
NO TRACKS....................when attempting to edit text for a
disc which has no tracks
TEXT EDIT....................when entering Text Edit mode
CD ARTIST....................when editing or erasing an artist
name
CD TITLE ......................when editing or erasing a title
TR N ARTIST................when editing or erasing an artist
name per track
TR N TITLE..................when editing or erasing a title per
track
TEXT ERASE..................when entering Text Erase mode
ALL TEXT ......................when entering All Text mode
ERASE OK ......................when confirmation for erasing has
to be given with ENTER key
ERASE ALL OK ............when confirmation for erasing has
to be given with ENTER key
ERASE MEMORY............when waiting for confirmation
when erasing a disc
Others
NO AUDIO TR................when the recorder enters a data
track during recording
FINALIZE CD ..............laser power calibration performed
96 times, finalize disc
INITIALIZING............during laser power calibration for
unfinalized discs
DISC RECOVER............during disc recovering after power
failure
OPC ERROR....................OPC failure during OPC procedure
(OPC = Optimum Power
Calibration)
RECORD ERROR............recording error in menu mode
DISC ERROR..................when trying to record on or finalize
a recovered disc
MEMORY VIEW ..............when selecting text review per
unfinalized disc in memory
MEMORY EMPTY............when REVIEW is selected while no
text is in memory
AUTO TRACK..................when selecting auto track
increment ON or OFF
MEMORY FULL/..............when text memory is full. To add a
FINALIZE CD
CD to the list, first finalize or
erase another disc from the list.
ON ......................................Auto Track increment on
OFF....................................Auto Track increment off
SET BALANCE ..............when selecting BALANCE
NO TEXT..........................no text stored for disc
10
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Connections general
Analog connections
For recording the following inputs are present:
- Digital optical input.
- Digital coaxial input.
Analog connection is required for playback of CDs (use cable
2) and for recording from external analog sources
(use cable 1).
- Analog input.
For playback the following outputs are present:
- Digital coaxial output.
- Analog output.
We advise you to connect these to the CD input on your
amplifier.
L
L
R
R
IN
OUT
ANALOG
IN
OUT
DIGITAL
1
IN
OPTICAL
The connections you make will depend upon the possibilities
your audio equipment offers. Please refer to the user manuals
for your other audio equipment first.
CD RECORDER
RECEIVER
2
L
L
R
Digital recordings (optical or coaxial) give the best
performance in audio and usability (e.g. auto-track).
(The digital optical connection is less sensitive to external
disturbances).
R
IN
OUT
TAPE
If your equipment does not offer digital connections, the high
quality Analog-Digital-Convertor of your CD recorder will
ensure very good audio performance when recordings are
made from the analog input.
Use the audio cables supplied. Connect the red plugs to the
R sockets, and the white plugs to the L sockets.
Playback via the digital coaxial output of the CD recorder
gives the best audio performance.
If your equipment does not offer digital connections, the high
quality Digital-Analog-Convertor of the CD recorder ensures a
very good sound quality via the analog output.
1 For recording, connect cable 1 between the ANALOG IN-
sockets on the CD recorder and the CDR LINE- or TAPE OUT-
sockets of an amplifier.
Note: For recording directly from a CD player, the analog
input of the CD recorder should be connected to the
analog output of the CD player.
We advise you to always establish both digital and analog
connections. In this way you can always make analog
recordings when digital recording is not possible.
2 For playback, connect cable 2 between the ANALOG OUT-
sockets on the CD recorder and the input sockets of an
amplifier e.g. TAPE IN, CDR or AUX.
We have described the most common ways of connecting the
CD recorder. If you still have difficulties with the connections
you can always contact the Philips Consumer Service desk in
your country.
Note: Never use the PHONO input.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Digital coaxial connections
Digital optical connections
Digital coaxial connection is only required in case you wish to
record from a CD player with a digital coaxial output.
Digital optical connection is only required in case you wish to
record from a CD player with a digital optical output.
L
L
L
L
CD RECORDER
CD RECORDER
R
R
R
R
IN
IN
OUT
OUT
ANALOG
IN
ANALOG
IN
OUT
DIGITAL
OUT
GITAL
IN
1
OPTAL
1
OPTICAL
3
4
L
L
CD PLA
CD PLA
R
YER
OUT
R
YER
OUT
ANALOG
OUT
ANALOG
OUT
DIGITAL
DIGITAL
OUT
OPTICAL
OUT
OPTICAL
2
2
L
RECEIVER
L
RECEIVER
L
L
R
R
R
R
IN
IN
OUT
OUT
TAPE
TAPE
Use the digital coaxial cable supplied.
When connecting the Digital
Optical cable, make sure it
is fully inserted until
1 For recording, connect the cable 3 between the DIGITAL
IN-socket on the CD recorder and the DIGITAL OUT-socket of
a CD player.
there is a click.
Note: Your CD recorder is equipped with a digital coaxial
output. This output can be used for digital playback.
1 Remove the dust caps from the digital optical connection.
(We recommend you save the cap).
2 For recording, connect a fibre-optic cable 4 between the
digital optical input of the CD recorder and the digital-
optical output of a CD player.
Note: For playback, the digital coaxial output or analog output
should be connected to an amplifier.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Power supply
Inserting batteries in the remote control
1 Plug the power cord supplied into the MAINS connector on
the CD recorder, then into a mains socket.
2 Press ON/OFF.
➜ The recorder is now in Standby mode.
1 Open the battery compartment cover.
3 Press any key to activate the recorder.
2 Insert 2 batteries (“AA”, LR-6 or UM-3; as supplied) as
shown.
Note:
- The CD recorder will automatically adjust to the local mains
voltage.
3 Replace the cover.
- When the CD recorder is in the ‘OFF’ position, it is still
consuming some power. If you wish to disconnect your
player completely from the mains, withdraw the plug from
the AC outlet.
Note: We recommend you use 2 batteries of the same type
and condition.
Batteries contain chemical substances, so they should
be disposed of properly.
Setup recommendations
- Place the CD recorder on a solid, vibration free surface.
- Do not place the CD recorder near a source of heat or in
direct sunlight.
- Do not use the CD recorder under extremely damp
conditions.
- If the CD recorder is placed in a cabinet, make sure that a
2.5 cm space remains free on all sides of the CD
recorder/player for proper ventilation.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL AND DISCS
Remote control commands
Inserting discs
SCAN
ABC
SHUFFLE
DEF
REPEAT
GHI
1
JKL
2
MN
3
OPQ
ERASSE
FINALIZE
4
RST
5
UVW
6
XYZ
FADE
SCROLL DISPLA
Y
REC TYPE
SOURCE
CANCEL
RECORD
PLA
Y/P
AUSE
STO
8
SPACE
9
SCROLL
7
DIGITAL
I
MINI AUDIO
CDR
CD RECORDER
TRACK INCR.
CD
MENU/STORE
REWIND
0
POWER ON/OFF
FFWD
EASY JOG
OPEN/CLOSE
CDR
CD
2
J
K
ENTER
9
;
5
6
MENU/
STORE
PROG.
ENTER CANCEL
Recordable
1 Press OPEN/CLOSE to open the disc tray.
➜ OPENlights up.
2 Insert a CD, CDR or CDRW in the appropriate recess in the
tray, label side up.
STANDBY..........................switches to Standby/On/Off
SCAN ................................plays the first 10 seconds of each
track
3 Press OPEN/CLOSE to close the tray (see also Playing a CD).
➜ CLOSElights up, followed by READINGand the
display will show the type of disc you inserted.
SHUFFLE............................plays CD(RW) or program in
random order
REPEAT..............................repeat play
Number/alphabet keys 0 - 9
REM
REC
TIME TRACK
TOTAL REM TRACK TIME
FADE
STEP
......................................- selects a track by number
- selects character for text input
TRACK INCR(ement) ........increases track numbers during
DIGITAL
OPTICAL
ANALOG
I
I
PROGRAM
RW
MANUAL SYNC
SHUFFLE REPEAT TRACK ALL
SCAN
recording
CD
SCROLL..............................activates scrolling of text over the
display
CDR ....................................selects CD recorder
CD ......................................selects CD player, can be used to
control a separate Philips CD player
• If a CDR(W) is finalized it will show CD on the display.
• If CD-text is available the TITLE/ARTIST will scroll by.
2
......................................starts CD(RW) play
REM
REC
TIME TRACK
TOTAL REM TRACK TIME
FADE
STEP
O ......................................previous track (Play and Program
mode)
P ......................................next track (Play and Program
mode)
1
2
3
4
5
6
7
8
9
10 11
DIGITAL
OPTICAL
ANALOG
I
I
PROGRAM
MANUAL SYNC
SHUFFLE REPEAT TRACK ALL
SCAN
CD
RW
9
......................................stops CD(RW) and clears a
program
Note:
Q....................................- searches backward
- cursor control in Menu/Prog.
review mode
R....................................- searches forward
- Only Audio CDs will be accepted. If a non-audio disc is
inserted, the display shows WRONG DISC.
- For recording it is important that the blank disc is
completely free from dust particles or scratches. (see Disc
maintenance)
- If you insert a blank or partly-recorded CDR or unfinalized
CDRW, the CD recorder will calibrate the disc for optimum
recording. During this process the display will first show
INITIALIZINGand then the number of audio tracks.
Calibration can take up to 25 seconds.
- cursor control in Menu/Prog.
review mode
;
......................................interrupts CD(RW) play/recording
MENU/STORE ..................- enters Menu mode
- stores Menu settings
PROG.(ram) ........................opens/closes program memory
ENTER................................- selects settings in Menu mode
- programs track numbers
REM
REC
TIME TRACK
TOTAL REM TRACK TIME
FADE
STEP
- starts playback of selected track
CANCEL ............................- deletes tracks from a program
- deletes text in Menu mode
- returns to a higher level in the
DIGITAL
OPTICAL
ANALOG
I
I
PROGRAM
RW
MANUAL SYNC
SHUFFLE REPEAT TRACK ALL
SCAN
CD
menu
14
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING
Remarks about recording
Recording modes
You will soon discover how easy it is to make your own CDs.
Your recorder offers several recording modes.
Nevertheless, it is advisable to use a CDRW disc for your first
try.
- RECORD DISC - to make a synchronized recording of the
complete disc or a program simply by starting the source.
- RECORD TRACK - to make a synchronized recording of a
single track simply by starting the source.
• If the disc is a CDRW and is already finalized you must
unfinalize it first.
- REC(ord) MANUAL - to manually start a recording simply by
pressing the RECORD key.
- MAKE CD - to make a synchronized recording of the
complete disc or a program simply by starting the source.
Finalizing will be done automatically.
• The recording procedure is the same for CDRs and
CDRWs.
• If the disc already contains recordings, the CD recorder will
automatically search for the end of the last track, so that
recording can start from there.
REM
REC
TIME TRACK
TOTAL REM TRACK TIME
FADE
STEP
• There must be at least 7 seconds of recording time left on
the disc, otherwise you will not be able to enter record
standby mode. DISC FULLthen lights up.
DIGITAL
OPTICAL
ANALOG
I
I
PROGRAM
RW
MANUAL SYNC
SHUFFLE REPEAT TRACK ALL
SCAN
CD
• If the display indicates COPY PROTECT, no digital
recording can be made of the source material. Recording
will not start.
Some remarks on recording:
- When Auto track is ON (default setting), track numbers will
automatically be increased during recording.
- By programming the source first, a compilation can be
recorded.
- If a finalized CD recordable disc is inserted in the CD
recorder, FINALIZED CDwill be displayed when REC
TYPE is pressed. Recording is not possible.
• The Serial Copy Management System (SCMS) only
allows digital recording under specific conditions:
- This means that it is not possible to make a digital copy
from a digital copy.
- Analog recording is always possible !
- The number of recordings from the original is unlimited.
- If a finalized CD rewritable disc is inserted in the CD
recorder, UNFINALIZEand PRESS ENTERwill be
displayed when the REC TYPE is pressed. If ENTER is
pressed, the disc will be unfinalized.
• A maximum of 99 tracks can be recorded on a disc.
Minimum allowable track length is 4 seconds.
• Recordings from DAT or DCC players will not always stop
automatically.
Important:
If you want to play the recorded CDR disc on any
regular CD player, it must first be finalized. See
finalizing discs.
Finalized CDRW discs play only on CDRW compatible
CD players.
For recording from CD changers do not use REC
MANUAL.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING
Start autostart recording
Autostart recording
1 To start recording, press PLAY on the selected source.
➜ The CD recorder automatically starts to record and d
lights continuously.
ERASE
FINALIZE
SCROLL
REC TYPE
SOURCE
CANCEL
DISPLA
Y
RECORD
PLA
Y/P
AUSE
STOP
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
MINI AUDIO
CD RECORDER
CDR
ANALOG
CD
RW
MENU/STORE
REWIND
FFWD
ON/OFF
• If, however, you start the source during a track, recording
starts at the beginning of the next track or after 2.7 seconds
of silence in analog recordings.
EASY JOG
OPEN/CLOSE
Recordable
ENTER
• To check the elapsed recording time, press DISPLAY. (This
can also be done during recording)
This feature enables you to make fast and easy recordings of
a CD. Track increments are automatically detected from the
source material. Track increments cannot be added manually.
In analog source material a silence of 2.7 seconds or more is
automatically detected as a track increment.
• The recorder stops automatically.
2 To stop recording manually, press STOP on the CD recorder.
➜ WAITlights up and SYNC and dgo out.
Important:
• If STOP 9was pressed within 3 seconds after pressing
PLAY, no recording will take place.
- Recording from CD-changers should always be started in the
RECORD DISC, RECORD TRACK or MAKE CD mode.
• To interrupt recording, press PAUSE on the CD recorder.
➜ dstarts to flash. To resume, press RECORD on the CD
recorder.
Preparing for autostart recording
1 Make sure the disc is absolutely free of scratches and dust
particles.
After recording the display will show UPDATEfor several
seconds.
2 Press SOURCE repeatedly until (depending on the
connection used):
➜ DIGITAL I d, OPTICAL I por ANALOG alights up
and DIGITAL 1, OPTICALor ANALOGappears on
the display.
Note: Recordings from DAT, DCC or analog sources will only
stop after 20 seconds silence.
Important:
If you want to play the recorded CDR disc on any
regular CD player, it must first be finalized. See
finalizing discs.
REM
REC
TIME TRACK
TOTAL REM TRACK TIME
FADE
STEP
DIGITAL
OPTICAL
ANALOG
I
I
PROGRAM
RW
MANUAL SYNC
SHUFFLE REPEAT TRACK ALL
SCAN
Finalized CDRW discs play only on CDRW compatible
CD players.
CD
3 With the CD recorder stopped, press REC TYPE
once: to select ‘RECORD DISC’;
twice: to select ‘RECORD TRACK’;
four times: to select ‘MAKE CD’.
➜ dand SYNC start to flash and the display shows the
selection.
REM
REC
TIME TRACK
TOTAL REM TRACK TIME
FADE
STEP
DIGITAL
OPTICAL
ANALOG
I
I
PROGRAM
RW
MANUAL SYNC
SHUFFLE REPEAT TRACK ALL
SCAN
CD
• If CHECK INPUT message also flashes, the digital
connection is incorrect.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING
3 With the recorder stopped, press REC TYPE three times to
enter the Manual Record standby mode.
➜ MANUAL starts to flash and the display shows REC
MANUAL.
Manual recording
ERASE
FINALIZE
SCROLL
REC TYPE
SOURCE
CANCEL
DISPLA
Y
RECORD
PLA
Y/P
AUSE
STOP
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
MINI AUDIO
CD RECORDER
CDR
ANALOG
CD
RW
MENU/STORE
REM
REC
TIME TRACK
TOTAL REM TRACK TIME
FADE
STEP
REWIND
FFWD
ON/OFF
EASY JOG
OPEN/CLOSE
Recordable
ENTER
DIGITAL
OPTICAL
ANALOG
I
I
PROGRAM
RW
MANUAL SYNC
SHUFFLE REPEAT TRACK ALL
SCAN
CD
Important:
• If CHECK INPUTmessage also flashes, the digital
connection is incorrect.
- Recording from CD-changers should always be started in the
RECORD DISC, RECORD TRACK or MAKE CD mode.
- Only make analog recordings when digital recording is not
possible.
4 Play the source first to set the optimal recording level on
the CD recorder.
Preparing for manual recording
5 Rotate the EASY JOG/ENTER key until, on the Record/Play
Level bar, all the blue segments are alight, but the red
segments do not light continuously during the loudest
passages.
1 Make sure the disc is absolutely free of scratches and dust
particles.
➜ Display shows _XX DB.
2 Press SOURCE repeatedly until (depending on the
connection used):
➜ DIGITAL I d, OPTICAL I por ANALOG alights up
and DIGITAL 1, OPTICALor ANALOGappears on
the display.
6 Stop the source.
Start manual recording
1 To start recording, press RECORD on the CD recorder and
immediately start the source (from Stop-mode).
➜ dlights continuously. The track number and recording
time appear on the display.
REM
REC
TIME TRACK
TOTAL REM TRACK TIME
FADE
STEP
DIGITAL
OPTICAL
ANALOG
I
I
PROGRAM
MANUAL SYNC
SHUFFLE REPEAT TRACK ALL
SCAN
CD
RW
• To record a 3-second silence at the start of a track, press
PAUSE on the CD recorder before starting the source.
• When Auto Track is ON (default setting), track numbers will
automatically be increased during recording.
• To check the elapsed recording time, press DISPLAY on the
CD recorder. (This can also be done during the recording.)
• To switch off the Auto Track function you have to enter
Menu mode.
If you wish to increase track numbers manually, press
TRACK INCR(ement) on the remote control. For further
instructions see Menu mode.
2 To stop recording, press STOP on the CD recorder.
➜ WAITlights up and dgoes out.
• If STOP was pressed within 3 seconds after RECORD, no
recording will take place.
ON (AUTO): The track increments are automatically taken over
from the digital source material or after 2.7
• To interrupt recording, press PAUSE on the CD recorder.
dstarts to flash. Resume at step 1.
seconds silence during analog recording.
OFF (MANUAL): Track numbers can be incremented manually
by pressing TRACK INCR(ement) on the
After recording the display will show UPDATEfor several
seconds.
remote control. (Minimum track length is 4
sec.) (This can also be done in Auto mode.)
Note: With AUTO TRACKON, the recorder will stop and go
to REC STANDBY for 1 minute and then goes to stop
mode automatically. Recordings from DAT, DCC or
recordings made analogously will stop after 20 seconds
silence. With AUTO TRACK OFF, the auto stop
mode is disabled.
• Track numbers cannot be changed after recording.
Note: Auto track works only with Consumer Sources with a
digital output signal according to the IEC 958
(consumer part) audio standard.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING
Important:
Unfinalizing CDRW discs
If you want to play the recorded CDR disc on any
regular CD player, it must first be finalized. See
finalizing discs.
For CDRW discs only.
If you want to make more recordings (or erasures of tracks) on
a finalized disc you must unfinalize it first. The Table of
Contents (TOC) will be removed.
Finalized CDRW discs play only on CDRW compatible
CD players.
To unfinalize:
1 With the CD recorder stopped, press REC TYPE or ERASE.
➜ UNFINALIZE and PRESS ENTER will appear on
the display.
Finalizing CDR & CDRW discs
Finalizing is a simple procedure, necessary to:
- be able to play recordings on a CD PLAYER,
- avoid further unwanted recordings on a disc,
- avoid erasure of tracks on a CDRW.
REM
REC
TIME TRACK
TOTAL REM TRACK TIME
FADE
STEP
DIGITAL
OPTICAL
ANALOG
I
I
PROGRAM
MANUAL SYNC
SHUFFLE REPEAT TRACK ALL
SCAN
CD
RW
Auto finalizing
Auto finalizing is possible when using the MAKE CD recording
function.
REM
REC
TIME TRACK
TOTAL REM TRACK TIME
FADE
STEP
Manual finalizing
DIGITAL
OPTICAL
ANALOG
I
I
PROGRAM
RW
MANUAL SYNC
SHUFFLE REPEAT TRACK ALL
SCAN
CD
1 Make sure the disc (in the CD recorder) is absolutely free of
scratches and dust particles.
2 Press ENTER.
➜ The disc will now be unfinalized and can be recorded on
2 With the recorder stopped press FINALIZE.
➜ The display shows FINALIZEand PRESS RECORD.
again.
REM
REC
TIME TRACK
TOTAL REM TRACK TIME
FADE
STEP
REM
REC
TIME TRACK
TOTAL REM TRACK TIME
FADE
STEP
1
2
3
4
5
6
7
DIGITAL
OPTICAL
ANALOG
I
I
PROGRAM
RW
MANUAL SYNC
SHUFFLE REPEAT TRACK ALL
SCAN
DIGITAL
OPTICAL
ANALOG
I
I
CD
PROGRAM
RW
MANUAL SYNC
SHUFFLE REPEAT TRACK ALL
SCAN
CD
Note:
REM
REC
TIME TRACK
TOTAL REM TRACK TIME
FADE
STEP
- Unfinalizing will take approximately 2 minutes.
- When unfinalizing a CDRW disc with text on it available,
this text will be transferred to the CD recorder memory. It
may occur that the text memory is full. The message
MEMORY FULL/FINALIZE CDwill be displayed. You
will now have to erase text, stored for other discs, or
finalize another disc in order to obtain memory space.
DIGITAL
OPTICAL
ANALOG
I
I
PROGRAM
RW
MANUAL SYNC
SHUFFLE REPEAT TRACK ALL
SCAN
CD
3 Press RECORD.
➜ XX XX FINALand the approximate finalization time
appears on the display.
The display counts down through the finalization.
On completion, the total number of tracks and the total
time recorded appears on the display.
For CDR(W), CDR(W) changes to CD on display.
Finalizing will take at least 2 - 4 minutes.
Note: During finalization, the CD recorder accepts no
operating commands.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING
To erase the entire disc:
Erasing CDRW discs
1 Press ERASE twice.
ERASE
FINALIZE
➜ The display shows the number of tracks and their total
playing time. ERASE DISCand PRESS RECORD
light up.
SCROLL
REC TYPE
SOURCE
CANCEL
DISPLA
Y
RECORD
PLA
Y/P
AUSE
STOP
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
MINI AUDIO
CD RECORDER
CDR
ANALOG
CD
RW
MENU/STORE
REWIND
FFWD
ON/OFF
EASY JOG
OPEN/CLOSE
Recordable
• If the disc is finalized, CD appears on the display after
inserting a CDRW in the recorder. The recorder will ask you
to confirm unfinalizing first. Confirm by pressing the EASY
JOG/ENTER key or ENTER on the remote control.
ENTER
For unfinalized CDRW discs only.
You can erase:
REM
REC
TIME TRACK
TOTAL REM TRACK TIME
FADE
STEP
- one or more tracks from the end,
- the entire disc.
1
2
3
4
5
6
7
8
9
10 11
DIGITAL
OPTICAL
ANALOG
I
I
PROGRAM
RW
MANUAL SYNC
SHUFFLE REPEAT TRACK ALL
SCAN
To erase one or more tracks from the end:
CD
1 Press ERASE once.
REM
REC
TIME TRACK
TOTAL REM TRACK TIME
FADE
STEP
➜ The display shows the number of tracks and their total
playing time. ERASE TRACKand PRESS RECORD
lights up.
1
2
3
4
5
6
7
8
9
10 11
DIGITAL
OPTICAL
ANALOG
I
I
PROGRAM
MANUAL SYNC
SHUFFLE REPEAT TRACK ALL
SCAN
CD
RW
•If the disc is finalized, CD appears on the display after
inserting a CDRW in the recorder. The recorder will ask you
to confirm unfinalizing first. Confirm by pressing the EASY
JOG/ENTER key or ENTER on the remote control.
2 Press RECORD.
➜ The display shows the total countdown time and
ERASE. The complete disc will be erased.
2 Select the track(s) you wish to erase by turning the EASY
JOG/ENTER key to the left and confirm by pressing this key.
➜ The selected track numbers start blinking on the track
bar.
➜ The display shows the remaining number of tracks and
the remaining playing time after erasing the selected
track(s).
REM
REC
TIME TRACK
TOTAL REM TRACK TIME
FADE
STEP
1
2
3
4
5
6
DIGITAL
OPTICAL
ANALOG
I
I
PROGRAM
RW
MANUAL SYNC
SHUFFLE REPEAT TRACK ALL
SCAN
CD
Erasure of a complete disc may take up to 1.5 minutes.
REM
REC
TIME TRACK
TOTAL REM TRACK TIME
FADE
STEP
1
2
3
4
5
6
7
DIGITAL
OPTICAL
ANALOG
I
I
PROGRAM
RW
MANUAL SYNC
SHUFFLE REPEAT TRACK ALL
SCAN
CD
REM
REC
TIME TRACK
TOTAL REM TRACK TIME
FADE
STEP
1
2
3
4
5
6
7
DIGITAL
OPTICAL
ANALOG
I
I
PROGRAM
RW
MANUAL SYNC
SHUFFLE REPEAT TRACK ALL
SCAN
CD
3 Press RECORD.
➜ The display shows the total countdown time and
ERASE.
➜ After the selected track(s) have erased, the display
shows the remaining tracks and their total playing time.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING
Selecting a track when CD play is stopped
Playing a CD
1 Turn the EASY JOG/ENTER key until the required track
ERASE
FINALIZE
number appears on the display.
SCROLL
REC TYPE
SOURCE
CANCEL
DISPLA
Y
RECORD
PLA
Y/P
AUSE
STOP
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
MINI AUDIO
CD RECORDER
CDR
ANALOG
CD
RW
MENU/STORE
REWIND
FFWD
2 Press EASY JOG/ENTER or ENTER on the remote control to
confirm or press PLAY/PAUSE 2;to start playing.
or
ON/OFF
EASY JOG
OPEN/CLOSE
Recordable
ENTER
1 Key in the required track number using the numerical keys
on the remote control. For 2-digit track numbers, press the
keys in rapid succession. Play starts.
or
1 Press PLAY/PAUSE 2;to start CD play.
➜ 2lights up and the track number and track time of the
1 Briefly press Jor Kone or more times.
track in play appear on the display.
2 Start playback by pressing PLAY/PAUSE 2;, EASY
JOG/ENTER or ENTER on the remote control.
2 Press DISPLAY once, twice or three times to see:
➜ Remaining track time, total remaining time, text
information (see Menu mode).
Search
3 To interrupt play temporarily, press PLAY/PAUSE 2;again.
➜ ;lights on the display
REC TYPE
SOURCE
RECORD
PLA
Y/P
AUSE
STOP
4 To continue play, press PLAY/PAUSE 2;again.
MENU/STORE
CANCEL
5 To stop play, press STOP 9.
REWIND
FFWD
➜ The number of tracks and the total playing time appear
on the display.
EASY
1 Hold down 5or 6.
Selecting a track
➜ The player first searches backwards or forwards at 10
times normal speed with sound at low volume, then
goes to 50 times normal speed with sound muted.
ERASE
FINALIZE
SCROLL
REC TYPE
SOURCE
CANCEL
DISPLA
Y
RECORD
PLA
Y/P
AUSE
STOP
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
MINI AUDIO
CD RECORDER
CDR
ANALOG
CD
RW
MENU/STORE
2 Release the button at the desired passage.
REWIND
FFWD
ON/OFF
➜ Play starts at the desired passage.
EASY JOG
OPEN/CLOSE
Recordable
ENTER
Note: During Shuffle, Repeat Track or Programmed play,
search is restricted to within the track being played at
the time.
Selecting a track during play
1 Turn the EASY JOG/ENTER key until the required track
number appears on the display.
➜ Play skips to the beginning of the selected track.
or
Key in the required track number using the numerical keys
on the remote control. For 2-digit track numbers, press the
keys in rapid succession.
➜ Play skips to the beginning of the selected track.
or
Press J or Kon the remote control one or more times.
➜ Play skips to the beginning of the present, previous or
subsequent tracks.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING
PROGRAMMING
Shuffle (random order) play
Remarks about programming
1 Press SHUFFLE on the remote control before or during CD
play to start shuffle play.
•You can program up to 99 tracks to play in any desired
sequence.
➜ The tracks on the CD (or program if set) play in random
order.
•Tracks can be programmed more than once, but each time
counts as a track (STEP).
2 Press SHUFFLE on the remote control again to return to
normal CD play.
Programming
Note: Shuffle is also cleared if you open the disc tray.
1 In Stop mode press PROG(ram) on the remote control to
enter Program mode.
➜ PROGRAM flashes and PROGRAMappears on the display.
Repeat CD, track or program
REM
REC
TIME TRACK
TOTAL REM TRACK TIME
FADE
STEP
1 Press REPEAT on the remote control one or more times
during CD play.
➜ When REPEAT TRACK lights up, the current track plays
repeatedly. When REPEAT ALL lights up, the disc or
program plays repeatedly.
1
2
3
4
5
6
7
8
9
10 11
DIGITAL
OPTICAL
ANALOG
I
I
PROGRAM
MANUAL SYNC
SHUFFLE REPEAT TRACK ALL
SCAN
CD
RW
2 Select the required track numbers by turning the EASY
JOG/ENTER key left or right and store by pressing ENTER.
REM
REC
TIME TRACK
TOTAL REM TRACK TIME
FADE
STEP
REM
REC
TIME TRACK
TOTAL REM TRACK TIME
FADE
STEP
1
2
3
4
5
6
7
8
DIGITAL
OPTICAL
ANALOG
I
I
PROGRAM
RW
MANUAL SYNC
SHUFFLE REPEAT TRACK ALL
SCAN
2
7
8
11
CD
DIGITAL
OPTICAL
ANALOG
I
I
PROGRAM
MANUAL SYNC
SCAN
CD
SHUFFLE REPEAT TRACK ALL
RW
2 To return to normal play, press REPEAT on the remote
control one or more times until:
➜ The REPEAT label disappears from the display.
or:
Key in a track number with the number keys. For 2-digit
numbers, press the keys in rapid succession.
➜ The track will be stored in the program.
Note:
- You can use shuffle in combination with REPEAT ALL or
programmed play.
- REPEAT is also cleared if you open the disc tray.
➜ The track number, total program time and the number of
programmed tracks (STEPS) are displayed.
3 Repeat step 2 for all tracks to be programmed.
4 Press STOP or PROG(ram) on the remote control to end
programming.
➜ PROGRAM lights continuously.
5 Press PLAY/PAUSE 2;to start programmed play.
Note:
- To review the program, press PROG(ram) on the remote
control, followed by 5or 6with the CD recorder in Stop
mode.
- To add more tracks to the program, repeat steps 1 to 5.
- If you try to store more than 99 tracks, PROG FULL
appears on the display.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
PROGRAMMING
MENU MODE
Clearing a program
Remarks about Menu mode
1 Press STOP 9if necessary to stop programmed play.
CDR
CD
2
2 Press STOP 9again to clear the program.
➜ PROGRAM disappears from the display.
REC TYPE
RECORD
SOURCE
CANCEL
PLA
Y/P
AUSE
STOP
J
K
MENU/STORE
9
;
REWIND
FFWD
5
6
•The program is also cleared if you open the disc tray.
MENU/
STORE
EASY JOG
PROG.
OPEN/CLOSE
ENTER CANCEL
Erasing a track from a program
ENTER
1 In Stop mode press PROG(ram) on the remote control to
enter Program mode.
REM
TOTAL REM
FADE
REC
TIME TRACK
TRACK TIME
STEP
2 Use 5or 6to select the track from which to delete.
➜ The track number and program step will be shown on
the display.
1
2
3
4
5
6
7
8
9
10 11
DIGITAL
OPTICAL
ANALOG
I
I
PROGRAM
MANUAL SYNC
SHUFFLE REPEAT TRACK ALL
SCAN
CD
RW
3 Press CANCEL to erase the track from the program.
➜ The remaining program steps and the remaining playing
time of the program will be displayed.
•In Menu mode you will have access to a number of features
which are not available via the regular keys (on the deck’s
front and the remote control).
•The TEXT submenus allow you to give names to discs and
tracks. The disc and track names will be displayed during
playback.
•In the RECORDING submenus you can set Auto Track and
Balance.
•All settings (except Balance) made in Menu mode will be
stored in the deck’s memory and can be called up and
changed at any time.
General Operation
1 In Stop mode, select CDR.
2 Press STORE/MENU on the deck or the remote control to
enter Menu mode.
➜ TEXT EDITappears on the display.
3 Rotate EASY JOG/ENTER to select the required submenus.
4 Press EASY JOG/ENTER or ENTER on the remote control to
confirm selections.
5 Rotate EASY JOG/ENTER to select options in the submenus.
6 Press EASY JOG/ENTER or ENTER on the remote control to
confirm selections.
7 Press STORE/MENU to store settings and return to the
submenu.
8 Press STOP 9to store settings and exit Menu mode.
Note: Text can only be edited for unfinalized discs. (Finalized
CDRW discs must be unfinalized first.)
22
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU MODE
4 Press EASY JOG/ENTER or ENTER on the remote control to
confirm.
Text settings
➜ The display will ask you to reconfirm your selection.
Storing names
5 Press EASY JOG/ENTER or ENTER on the remote control to
reconfirm.
1 Select the TEXT EDIT submenu.
➜ TEXT EDITappears on the display.
6 Press STORE/MENU to return to the submenu or STOP 9to
exit.
2 Press EASY JOG/ENTER or ENTER on the remote control to
confirm.
Text Memory Review/Erase Text Memory
3 Rotate EASY JOG/ENTER to select the required option in
the submenu: CD Artist, CD Title,Track 1 Artist, Track 1 Title,
etc.
1 Select the MEMORY VIEW submenu.
➜ MEMORY VIEWappears on the display.
4 Press EASY JOG/ENTER or ENTER on the remote control to
confirm.
2 Press EASY JOG/ENTER or ENTER on the remote control to
confirm.
5 Select the characters by rotating the EASY JOG/ENTER key
or by pressing the corresponding numeric/alphabet key on
the remote control.
3 Select the disc you wish to erase.
REM
REC
TIME TRACK
TOTAL REM TRACK TIME
FADE
STEP
REM
REC
TIME TRACK
TOTAL REM TRACK TIME
FADE
STEP
1
2
3
4
5
DIGITAL
OPTICAL
ANALOG
I
I
PROGRAM
RW
MANUAL SYNC
SHUFFLE REPEAT TRACK ALL
SCAN
CD
1
2
3
4
5
DIGITAL
OPTICAL
ANALOG
I
I
PROGRAM
RW
MANUAL SYNC
SHUFFLE REPEAT TRACK ALL
SCAN
CD
4 Press EASY JOG/ENTER or ENTER on the remote control to
confirm.
➜ ERASE MEMORYappears on the display.
6 Press EASY JOG/ENTER or ENTER on the remote control to
store the characters and move to the next cursor position.
REM
REC
TIME TRACK
TOTAL REM TRACK TIME
FADE
STEP
7 Press STORE/MENU to store a name you have entered and
return to the submenu or STOP 9to exit.
1
2
3
4
5
DIGITAL
OPTICAL
ANALOG
I
I
PROGRAM
RW
MANUAL SYNC
SHUFFLE REPEAT TRACK ALL
SCAN
CD
Note:
- A maximum of 60 characters can be stored per item.
- By pressing the EASY JOG/ENTER key or ENTER on the
remote control without selecting a character first, you can
insert a space between characters.
5 Press EASY JOG/ENTER or ENTER on the remote control to
reconfirm.
- With the 56keys you can move to a required cursor
position.
- With the CANCEL key you can delete a character.
- When an artist’s name has been stored for a certain track,
the name will automatically be copied for the next track.
The name can be confirmed by pressing STORE/MENU or a
new name can be entered as described above.
6 Press the EASY JOG/ENTER key or ENTER on the remote
control to confirm the erasure of the text for that particular
disc.
7 Press STORE/MENU to return to the submenu or STOP 9to
exit.
Note:
Erasing names
- If there are no discs in the memory, the message MEMORY
EMPTYappears on the display.
1 Select the TEXT ERASE submenu.
➜ TEXT ERASEappears on the display.
- When the text memory of your CD recorder is full, the
message MEMORY FULLwill appear, followed by
FINALIZE CD. If you want to add a CD to the list of
discs for which text is stored, you have to erase a disc from
this list or finalize another disc. (“for which text is stored”)
- MEMORY FULL/FINALIZE CDmay also appear when
unfinalizing a CDRW disc for which text was stored (see
‘Unfinalizing CDRW discs’). The same action(s) should be
taken in order to obtain memory space.
2 Press EASY JOG/ENTER or ENTER on the remote control to
confirm.
3 Rotate EASY JOG/ENTER to select the required option in
the submenu: All Text, CD Title, CD Artist, Track 1 Title,
Track 1 Artist, etc.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU MODE
Recording settings
Auto track increment
Balance (Only active in Record/Standby mode)
1 Select the AUTO TRACKING sub menu.
➜ AUTO TRACKappears on the display.
1 Select the SET BALANCE submenu.
➜ SET BALANCEappears on the display.
2 Press EASY JOG/ENTER or ENTER on the remote control to
confirm.
2 Press EASY JOG/ENTER or ENTER on the remote control to
confirm.
➜ FE and L-128 R-128appear on the display.
3 Select Auto track ONor OFF.
REM
REC
TIME TRACK
TOTAL REM TRACK TIME
FADE
STEP
REM
REC
TIME TRACK
TOTAL REM TRACK TIME
FADE
STEP
E
1
2
3
4
5
REWIND
FFWD
DIGITAL
OPTICAL
ANALOG
I
I
1
2
3
4
5
PROGRAM
RW
MANUAL SYNC
SHUFFLE REPEAT TRACK ALL
SCAN
CD
DIGITAL
OPTICAL
ANALOG
I
I
PROGRAM
RW
MANUAL SYNC
SHUFFLE REPEAT TRACK ALL
SCAN
CD
3 Adjust recording balance by turning the EASY JOG/ENTER
key.
4 Press EASY JOG/ENTER or ENTER on the remote control to
confirm.
➜ ONor OFFappears for 2 seconds on the display.
•Turn left: the figure left (F) counts up, right counts down.
•When ONis selected, track numbers will be automatically
•Turn right: the figure right (E) counts up, left counts
incremented during recording.
down.
•When OFFis selected, you can number the recorded tracks
yourself.
4 Press EASY JOG/ENTER or ENTER on the remote control to
confirm.
5 Press STORE/MENU to store settings and return to the
submenu or STOP 9to exit.
5 Press STORE/MENU to store settings.
Note: The balance setting will not be stored.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
FIXING PROBLEMS
Will not record
• clean the disc
TROUBLESHOOTING
• check if CDR(W) is an unfinalized disc
• check that the disc is recordable and replace
if necessary
If your CD recorder is defective, it is wise to check this list
first. You may have forgotten a simple step.
• the disc is not an AUDIO disc (WRONG
DISC)
• wrong input source chosen. Input label
flashing (CHECK INPUT)
• text memory full (MEMORY FULL/
FINALIZE CD). When a CDRW has to be
unfinalized for recording. Erase text for other
disc(s) or finalize other disc(s) to obtain
memory space.
Warning!
Under no circumstances should you attempt to repair
the CD recorder yourself as this will invalidate the
guarantee.
SYMPTOM • possible solution:
No power • ensure that the ON/OFF button is on: the CD
recorder is in standby mode, press any key to
activate it
Recording is distorted
• make sure the recording level is correct
• ensure that the mains cable is plugged in
correctly
• switch the recorder OFF and then
immediately back ON
20 second pause between recordings
• see Autostart recording
Auto track does not work
Player does not react
• check if auto track is selected
• switch the ON/OFF button on the front of the
player off and back on
• check if there are 2.7 seconds silence in
between the tracks (analog recording only)
• check if the source is a consumer source with
the digital output according to the IEC audio
standard
DISC RECOVERon display
• a power failure has occurred during
recording, the CD recorder is attempting to
repair the disc
• source is DVD player (no track information)
• if DISC ERRORthen appears on the
display, the disc cannot be recorded further,
and cannot be finalized. But it can still be
played on the CD recorder or another CD
recorder.
• on a CDRW disc, the track being recorded is
lost, but further recording and finalization can
still be done
No sound • check the audio connections
• if using an amplifier, try using a different
source
Amplifier sound is distorted
• check that the CD recorder analog output is
not connected to the amplifier Phono input
Play will not start
• ensure that the label of the CD is facing up
• clean the disc
• check that the disc is not defective by trying
another disc
Remote control does not work
• point the remote control directly at the CD
recorder
• check the batteries and replace if necessary
• select the right source first
25
Download from Www.Somanuals.com. All Manuals Search And Download.
00/COVER 12T 09-08-1999 12:54 Pagina 5
The products and services described herein are not necessarily available in all contries.
The specifications and design of this product are subject of change without notice.
Printed in Hungary.
© PHILIPS 1999
All trademarks acknowledged.
3104 125 2275.1
Download from Www.Somanuals.com. All Manuals Search And Download.
|