AZ102S
AZ102C
CD Soundmachine
AZ102N
AZ102G
AZ102V
AZ102R
AZ102B
Register your product and get support at
User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
7
3
4
5
8
PROG
X
6
ALL
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Controls/Power Supply
Congratula tions on your purchase and
CAUTION
welcome to Philips!
– Visible and invisible laser radiation. If the
cover is open, do not look at the beam.
– High voltage! Do not open.You run the
risk of getting an electric shock. The
machine does not contain any user-
serviceable parts.
– Modification of the product could result
in hazardous radiation of EMC or other
unsafe operation.
To fully benefit from the support that
Philips offers, register your product at
Supplied Accessories
– AC power cord
Top/front panels (See 1)
– Use of controls or adjustments or
performance of precedures other than
herein may result in unsafe operation.
1
2
3
VOLUME
–
adjusts volume level.
plays all tracks in random order
SHUFFLE –
This set complies with the radio
interference requirements of the
European Union.
REPEAT
–
repeats a track/
CD program/entire CD.
4
2 ; –
§ ∞
starts or pause CD playback
selects the next/previous track
–
– searches forwards/backwards (press and
hold the button) within the current track
Power Supply
Whenever convenient, use the power supply
cord if you want to conserve battery life.
Make sure you remove the plug from the set
and wall outlet before inserting batteries.
9
–
–
stops CD playback;
erases a CD program
5 PROG – programs tracks and reviews the
program
Batteries (not included)
1
2
Open the battery door and insert 6 batteries,
type R-14, UM-2 or C-cells, (preferably
alkaline) with the correct polarity as indicated
by the "+" and "–" symbols inside the
compartment.
6 LIFT TO OPEN
– opens/closes the CD door.
7 TUNING – tunes to radio stations
8
Display
–
shows the CD functions
Replace the battery door, making sure the
batteries are firmly and correctly in place. The
set is now ready to operate.
Back panel (See 1and 2)
Source selector: CD, FM, MW, OFF
9
–
–
selects CD or radio source of sound
power off switch
Batteries contain chemical substances, so
they should be disposed of properly.
0 Telescopic antenna
•
•
Incorrect use of batteries can cause electrolyte
leakage and will corrode the compartment or
cause the batteries to burst:
Do not mix battery types: e.g. alkaline with
carbon zinc. Only use batteries of the same type
for the set.
– improves FM reception.
AC MAINS~ inlet for power cord.
!
@
#
–
DBB
–
turns the bass enhancement on/off.
LINE-IN – inlet for external audio source.
•
•
When inserting new batteries, do not try to mix
old batteries with the new ones.
Remove the batteries if the set is not to be used
for a long time.
Bottom panel
Battery door – Press on the arrow and
push to insert 6 x 1.5V R-14/ UM-2/ C-cells.
$
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Supply
General Operation / Tuner
Using AC power
General operation
WArNINg: Always check you have
completely switched off the set, before
you change or disconnect power supply.
Switching on and off and selecting the
function
To select your sound source, adjust the
1
2
1
2
Check if the power voltage, as shown on
the type plate located on the bottom
of the set, corresponds to your local
power supply. If it does not, consult your
dealer or service center.
Source selector to: CD, FM or MW.
To switch off the set, adjust the Source
selector to OFF position.
3
To switch to LINE IN mode, connect
an external audio source to the LINE-
IN inlet.
Connect the power cord to the AC
MAINS~ inlet and the wall socket. The set
is now connected and ready for use.
3
4
To switch the set off completely, withdraw
the power cord from the wall socket.
Helpful hints:
Install the unit near the AC outlet and
where the AC power plug can be easily
reached.
•
•
The set switches to LINE IN mode
automatically when an external audio source
is connected, no matter the set is in CD,
FM or MW mode.
•
Disconnect the power cord from the wall
socket to protect your set during heavy
thunderstorms. Children could seriously
injure themselves as the free end of the
cable may still be live if only the connector
is removed from the MAINS socket at the
back of the unit.
The LINE-IN inlet is not for earphones.
Adjusting volume and sound
Adjust the sound with the VOLUME and
DBB controls.
The type plate is located on the bottom
of the set.
Helpful hints:
Radio reception
Adjust the Source selector to FM or
MW.
1
2
–
To avoid unnecessary energy consumption,
always adjust the Source selector to OFF
after using the set.
Turn TUNING to tune to a station.
Helpful hints:
To improve radio reception
•
•
For FM, extend, incline and turn the
telescopic antenna for best reception.
Reduce its length if the signal is too strong.
For MW, the set uses a built-in antenna.
Direct this antenna for best reception by
turning the whole set.
Download from Www.Somanuals.com. All Manuals Search And Download.
CD Player
Playing a CD
Selecting a different track
Press ∞ / § once or repeatedly until the
desired track number appears in the display.
In the pause/stop position, press 2; to start
playback.
•
This CD player plays Audio Discs
including CD-Recordables (CD-R) and
CD-Rewritables (CD-RW).
•
•
•
MP3, CD-ROM, CD-I, CDV, VCD, DVD or
computer CDs are not possible for playback.
IMPORTANT!
Finding a passage within a
track
CDs encoded with copyright protection
technologies by some record companies
may be unplayable by this product.
1
2
During playback, press and hold ∞ or § .
Ü The CD is played at high speed and with reduced
volume.
1
2
Adjust the Source selector to CD.
When you recognize the passage you want,
release ∞ or § to resume normal playback.
Open the CD door, and insert a CD with
the printed side facing up, then press the
CD door gently to close.
Helpful hints:
When your searching reaches the end of the
Ü Display shows --, and later the total number
–
of tracks. (See
)
3
last track, the CD goes to stop mode.
3
4
Press 2; to start playback.
To pause playback, press 2;.
2
Ü Display: flashes. (See 4)
5
6
To resume, press 2; again.
To stop CD playback, press
9.
Helpful hints:
CD play will also stop when:
–
–
–
you open the CD door;
you select FM MW or OFF sound source;
the CD has reached the end.
,
Download from Www.Somanuals.com. All Manuals Search And Download.
CD Player
Programming track
numbers
Different play modes:
REPEAT. and SHUFFLE
(See 6, 7)
You may store up to 20 tracks in the desired
sequence. If you like, store any track more
than once.
REPEAT
You can play the current track or the whole
disc repeatedly, and combine REPEAT
modes with PROG (PROGRAM).
1
In the stop position, press PROG to
activate programming.
Ü Display: PROG and 00 flash. (See 5)
REP – plays the current track continuously.
REP ALL – repeats the entire CD/program
2
3
Press
number.
∞
or
§
to select your desired track
1
To select play mode, press REPEAT once
or more.
Ü The display shows REP icon or REP ALL icon.
Press PROG to store the desired track
number.
Ü Display: PROG and 00flash for you to
2
3
Press 2; to start playback if in the stop/
pause position.
To return to normal playback, press
REPEAT repeatedly until the modes are no
longer displayed.
program the next track..
4
Repeat steps 2 to 3 to select and store all
desired tracks in this way.
Ü If you attempt to store more than 20 tracks, no
track can be selected and the display
shows --.
– You can also press 9 to cancel your play
mode.
SHUFFLE
5
To play your program, press
2/;.
You can play all the tracks in random order.
Helpful hints :
1
2
In the stop position, press SHUFFLE to
switch on shuffle play.
–
When playback of your program comes to the
stop position, your set will return to normal
playback. To re-enter program mode, press
PROG in the stop position.
Ü
Display shows SHUFFLE icon.
To switch off shuffle play, press 9.
Helpful hints:
During the shuffle play, when rEP function is
–
Reviewing the program
In the stop position, press PROG repeatedly
to see your stored tracks.
selected, it will play the current shuffled track
repeatedly, or when the rEP ALL function is
selected, it will repeat the shuffle play of the
entire CD.
Erasing a program
You can erase the contents of the memory
by:
– in the stop position, press PROG to
enter program mode, and then press 9.
– selecting FM
,
MW or OFF;
– opening the CD door;
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance & Safety (
)
8
See
Safety information
CD player and CD handling
•
If the CD player cannot read CDs correctly,
use a cleaning CD to clean the lens before
taking the set to repair.
•
•
Place the set on a flat, hard and stable
surface so that the system does not tilt.
Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
•
•
The lens of the CD player should never be
touched!
Sudden changes in the surrounding
temperature can cause condensation on the
lens of your CD player. Playing a CD is then
not possible. Do not attempt to clean the
lens but leave the set in a warm environment
until the moisture evaporates.
•
Do not expose the set, batteries, CDs to
humidity, rain, sand or excessive heat caused
by heating equipment or direct sunlight.
•
•
The apparatus shall not be exposed to
dripping or splashing.
•
•
Always close the CD door to avoid dust on
the lens.
Adequate ventilation with a minimum gap
of 15cm (6 inches) between the ventilation
holes and surrounding surfaces is necessary
to prevent heat build-up.
To clean the CD, wipe in a straight line from
the center towards the edge using a soft,
lint-free cloth. Do not use cleaning agents as
they may damage the disc.
•
Do not cover the ventilation openings with
items such as newspapers, table-cloths,
curtains, etc.
•
Never write on a CD or attach any stickers
to it.
•
•
•
No objects filled with liquids, such as vases,
shall be placed on the apparatus.
No naked flame sources, such as lighted
candles, should be placed on the apparatus.
The mechanical parts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.
•
To clean the set, use a dry cloth. Do not
use any cleaning agents containing alcohol,
ammonia, benzene or abrasives as these may
harm the housing.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or service
centre.
WArNINg:
Do not open the set as there is a risk of electric shock. Under no
circumstances should you try to repair the set yourself, as this will
invalidate the guarantee.
Problem
Note:
Make sure the CD is not encoded with
copyright protection technologies, as some
do not conform to the Compact Disc
standard.
– Possible cause
•
Remedy
No sound /power
– Volume not adjusted
The CD skips tracks
•
Adjust the VOLUME
– Power cord not securely connected
Connect the AC power cord properly
– Batteries dead/ incorrectly inserted
Insert (fresh) batteries correctly
– CD contains non-audio files
– CD damaged or dirty
•
Replace or clean CD
– Program/shuffle is active
Quit program/shuffle mode
•
•
•
Note: A CD badly scratch or dirty may result in
improper operation.
∞
§
•
Press
,
once or more to skip to a CD
audio track, instead of the data file.
Display does not function properly /
No reaction to operation of any of the
controls
– Electrostatic discharge
•
Switch off and unplug the set. Reconnect after a
few seconds
--, Er or 01 indication
– No CD inserted
•
Insert a CD
– CD badly scratched or dirty
Replace/ clean CD, see Maintenance
– Laser lens steamed up
Wait until lens has cleared
– CD-R/CD-RW is blank or not finalized
•
•
•
Use a finalized CD-R/CD-RW or suitable CD
Audio disc only
Download from Www.Somanuals.com. All Manuals Search And Download.
Environmental information
All unnecessary packaging material has been omitted. The packaging can be easily
separated into three materials: cardboard, polystyrene and plastic.
Your set consists of materials which can be recycled if disassembled by a
specialized company. Please observe the local regulations regarding the
disposal of packaging, dead batteries and old equipment.
Specifications
Power consumption............................................................................................................ ≤ 15 W
Dimensions...................................................................................290 mm x 143 mm x 240 mm
Weight......................................................................................................................................1.62 kg
Download from Www.Somanuals.com. All Manuals Search And Download.
Meet Philips at the Internet
CLASS 1
LASER PRODUCT
AZ102S
AZ102C
AZ102N
AZ102G
AZ102V
AZ102R
AZ102B
Printed in China
AZ102_98_UM_V3.0
Download from Www.Somanuals.com. All Manuals Search And Download.
|