Register your product and get support at
AC4072
AC4074
User manual
Download from Www.Somanuals.com. All Manuals Search And Download.
6
English
introduction
Congratulations on your purchase and welcome to Philips!To fully benefit
com/welcome.
With this new living room air purifier you breathe cleaner air. For the best
results, place the living room air purifier in a room where you spend most
of your time, e.g. the living room.
Wherever there are people, plants or pets, there are airborne particles that
can affect your well-being, especially if you suffer from allergies. Because of
these particles, the air inside a room may be more polluted than the air in
a large city.
Normally, particles are invisible and odourless. Nevertheless they can affect
your health.The living room air purifier reduces the amount of animal
dander and industrial pollutants in the air, and therefore improves the
air quality. It also filters out ultrafine particles larger than 20 nanometres,
including bacteria and some viruses.According to publications of the
World Health Organization, the avian and human influenza viruses and the
Legionella bacterium are larger than 20 nanometres.
Filtration in several stages
The living room air purifier has a unique multi-stage filtration system that
ensures the best air quality:
-
Stage 1:The pre-filter has been treated with antibacterial substances. It
catches big particles like human hair, pet hair etc.
-
Stage 2:The formaldehyde filter (supplied with AC4074) filters out
formaldehyde and other volatile organic compounds (VOCs). In
combination with the HEPA filter, the multi-care filter filters out dust,
pollen and ultrafine particles larger than 20 nanometres, including
bacteria and some viruses.According to publications of the World
Health Organization, the avian and human influenza viruses and
Legionella bacterium are larger than 20 nanometres.
Note:The AC4074 and AC4072 are suitable for both the formaldehyde filter
and the multi-care filter.When you replace the filter present in your type, you
can choose the filter (formaldehyde or multi-care) that suits your needs best.
-
Stage 3:The activated carbon filter filters out odours and harmful gases
effectively.
-
Stage 4:The high-performance composite HEPA filter with anti-
bacterial coating effectively filters out fine dust and cigarette smoke,
while the antibacterial and anti-mould functions of organic antibacterial
materials filters out germs and mould.
general description (Fig. 1)
A
B
Air quality light ring
Fan speed indicator (AC4074 only)
C Air quality sensor outlet
D Air quality sensor
E
F
Air quality sensor inlet
Handle
G Air outlet
H Air inlet
I
J
Cord storage facility
Mains cord
Download from Www.Somanuals.com. All Manuals Search And Download.
English
7
K
Control panel
1
2
3
4
5
6
7
8
9
Light sensor for night mode
AIR QUALITY on/off button with light
Power on/off button
SILENT button with light
Power-on light
FAN SPEED button with light
AUTO button with light
Fan speed lights (1, 2, 3 and boost power)/filter replacement lights
FAN SPEED indications
10 REPLACE FILTER indications
Filter 4: HEPA filter
L
M Filter 3: activated carbon filter
N Filter 2: formaldehyde filter (supplied with AC4074) or multi-care filter
(supplied with AC4072)
O Filter 1: pre-filter
P
Front panel
important
Read this user manual carefully before you use the appliance and save it for
future reference.
Danger
-
Do not let water or any other liquid or flammable detergent enter the
appliance to avoid electric shock and/or a fire hazard.
-
Do not clean the appliance with water or any other liquid or a
(flammable) detergent to avoid electric shock and/or a fire hazard.
Warning
-
Check if the voltage indicated on the bottom of the appliance
corresponds to the local mains voltage before you connect the
appliance.
-
If the mains cord is damaged, you must have it replaced by Philips, a
service centre authorised by Philips or similarly qualified persons in
order to avoid a hazard.
-
-
Do not use the appliance if the plug, the mains cord or the appliance
itself is damaged.
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for
their safety.
-
-
Children should be supervised to ensure that they do not play with the
appliance.
Do not block the air inlet and outlet, e.g. by placing items on the air
outlet or in front of the air inlet.
Caution
-
This appliance is not a substitute for proper ventilation, regular vacuum
cleaning or use of an extractor hood or fan while cooking.
If the wall socket used to power the appliance has poor connections,
the plug of the appliance becomes hot. Make sure you plug the
appliance into a properly connected wall socket.
-
Download from Www.Somanuals.com. All Manuals Search And Download.
8
English
-
-
-
-
-
-
-
-
Always place and use the appliance on a dry, stable, level and horizontal
surface.
Leave at least 20cm free space behind and on both sides of the
appliance and leave at least 30cm free space above the appliance.
Do not place anything on top of the appliance and do not sit on the
appliance.
Do not place the appliance directly below an air conditioner to prevent
condensation from dripping onto the appliance.
Make sure all filters are properly installed before you switch on the
appliance.
Only use the original Philips filters specially intended for this appliance.
Do not use any other filters.
Avoid knocking against the appliance (the air inlet and outlet in
particular) with hard objects.
Always lift or move the appliance by the handle at the back of the
appliance.
-
-
Do not insert your fingers or objects into the air outlet.
Do not use this appliance when you have used indoor smoke-type
insect repellents or in places with oily residues, burning incense or
chemical fumes.
-
Do not use the appliance near gas appliances, heating devices or
fireplaces.
-
-
Always unplug the appliance after use and before you clean it.
Do not use the appliance in a room with major temperature changes,
as this may cause condensation inside the appliance.
The appliance is only intended for household use under normal
operating conditions.
Do not use the appliance in wet surroundings or in surroundings with
high ambient temperatures, such as the bathroom, toilet or kitchen.
The appliance does not remove carbon monoxide (CO) or radon
(Rn). It cannot be used as a safety device in case of accidents with
combustion processes and hazardous chemicals.
-
-
-
Electromagnetic fields (EMF)
This Philips appliance complies with all standards regarding electromagnetic
fields (EMF). If handled properly and according to the instructions in this
user manual, the appliance is safe to use based on scientific evidence
available today.
Before first use
Placing the filters
The appliance comes with all filters fitted inside, but you have to remove
the packaging of the filters before you can use the appliance. Remove all
filters, unpack them and place them back into the appliance as described
below.
Tip: Place the appliance against a wall for more stability when you remove or
insert filters.
Note: Make sure you insert the filters in the correct position.
Download from Www.Somanuals.com. All Manuals Search And Download.
English
9
1 Place your fingers in the recesses of the side panels and gently pull
the top part of the front panel towards you.Then lift the hooks at
the bottom of the panel out of the bottom of the appliance.
2 Remove all the filters from the appliance.
3 Remove all packaging material from the filters.
4 Put filter 4 (HEPA filter) back into the appliance.
Note: Make sure that the side with the tag is pointing towards you.
5 Put filter 3 (activated carbon filter) back into the appliance.
Download from Www.Somanuals.com. All Manuals Search And Download.
10 English
6 Put filter 2 (formaldehyde filter for AC4074 or multi-care filter for
AC4072) back into the appliance.
Note: Make sure that the side with the tag is pointing towards you.
7 Place filter 1 (pre-filter) in the appliance.
Note: Make sure that the side with the two projections is pointing towards you.
Note: Make sure that all hooks are properly attached to the appliance.
8 To reattach the front panel, insert the bottom hooks into the bottom
of the appliance first (1).Then push the panel against the body of the
appliance (2).
2
1
Using the appliance
1 Put the plug in the wall socket
All lights go on twice and you hear a beep.Then the lights go out
again.
2 Press the on/off button to switch on the appliance.
The power-on light and the AIR QUALITY light on the control panel
go on.
Download from Www.Somanuals.com. All Manuals Search And Download.
English 11
The air quality light ring shows the quality of the air.
Air quality indication
Colour
Blue
Air quality
very good
good
Deep purple
Purple
Red
fair
bad
To switch off the air quality light ring, press the AIR QUALITY button.
Note:The air quality light ring automatically goes on when the appliance is
switched on.
The appliance automatically starts operating in the AUTO mode.
To switch off the appliance, press the on/off button again and unplug the
appliance.
Note:When the humidity level in the room is very high, it is possible that
condensation develops on the air quality sensor.As a result, the AIR QUALITY
light on the control panel and the air quality light ring may indicate that the
air quality is bad even though the air quality is good. In this case, the auto
mode causes the appliance to run at high fan speed.You can solve this by
cleaning the air quality sensor. If condensation develops frequently during
periods of high humidity, we advise you to use one of the manual speed
settings.
Fan speed lights/filter replacement lights
-
The lights on the right-hand side of the control panel have a dual
function: they either indicate the fan speed or they indicate that the
filters should be replaced or cleaned.
-
-
When lights 1 to 3/4 light up continuously, they indicate the current fan
speed.
When light 1 flashes, you have to clean the pre-filter.When lights 2
and/or 3/4 flash, you have to replace these filters. If lights 2 and/or
3/4 flash, the REPLACE FILTER light also flashes (see chapter ‘Filter
replacement’ for more information).
-
When lights 2, 3/4 and the REPLACE FILTER light are on continuously,
the appliance is locked (see chapter ‘Filter replacement lock’ for more
information).
Adjusting the air quality sensor sensitivity
People with certain health problems (e.g. allergies or asthma) have a
greater need for healthy air. For this reason, the appliance allows you to
Download from Www.Somanuals.com. All Manuals Search And Download.
12 English
adjust the sensitivity of the air quality sensor.When it is set to a higher
sensitivity level, the appliance already starts cleaning the air at lower
pollution levels to make the air even cleaner.
There are 3 sensitivity levels:
-
-
-
standard
sensitive
extra sensitive
The pollution sensor is set to standard sensitivity.You can adjust the
sensitivity of the air quality sensor in the following way:
1 If the appliance is already plugged in, unplug the appliance and wait
for a few minutes.
2 Press the AIR QUALITY button and simultaneously put the mains
plug in the wall socket.
The appliance beeps twice and one of the fan speed lights flashes to
show the current sensitivity level of the air quality sensor.
sensitivity level:
Fan speed light
Sensitivity level
extra sensitive
sensitive
1
2
3
standard
3 Press the FAN SPEED button to adjust the sensitivity level of the air
quality sensor.
One of the fan speed lights flashes to show the set sensitivity level of
the air quality sensor.
4 Press the on/off button to switch off the appliance.
Note:When you change the sensitivity level, the appliance automatically starts
operating at the set sensitivity level whenever you switch on the appliance.
Auto mode
When the appliance is switched on, the built-in air quality sensor
automatically measures the ambient air quality.When the auto mode is
activated, the appliance selects the most appropriate fan speed for the
measured air quality.
1 Press the on/off button to switch on the appliance.
Download from Www.Somanuals.com. All Manuals Search And Download.
English 13
2 Press the AUTO button to activate the auto mode.
Note:When the appliance is operating in another mode and you want to
activate the auto mode, simply press the AUTO button.
The AUTO light goes on.
The FAN SPEED light indicates at which fan speed the appliance is
operating.
Note:When the air quality is very good and the appliance operates at a very
low fan speed, the FAN SPEED light for the lowest speed setting does not go
on. In this case only the power-on light and the AUTO light are on.
Note:The built-in air quality sensor measures the air quality and automatically
selects the appropriate speed setting to ensure the best possible air quality in
your room. When the air is clean, the appliance stops running.When the air
quality deteriorates, the appliance starts running at a low fan speed and noise
level so that the energy consumption is minimised.
Night mode
The appliance works in harmony with its surroundings. In auto mode, the
appliance automatically switches to night mode when the room in
which it is operating becomes dark.When the room has been dark for
3 minutes, the lights of the appliance go out, the fan speed and noise
level are reduced and the energy consumption is minimised. If the room
becomes bright again for 5 minutes or longer, the appliance resumes
normal operation.
In night mode, the automatic control is still active. If the air is clean, the
lights and the fan are off. If the air quality deteriorates, the appliance is
activated and the lights and the fan come on again.
Note:The night mode only works when the appliance is operating in the auto
mode.
Fan speed
If you do not use the auto mode, you can select the desired fan speed
yourself.
1 Press the on/off button to switch on the appliance.
2 Press the FAN SPEED button one or more times to select the
desired fan speed.
The corresponding fan speed light and the indications above the
lights show the set fan speed (1, 2, 3 or boost power).
Download from Www.Somanuals.com. All Manuals Search And Download.
14 English
AC4074 only:The corresponding fan speed light in the fan speed
indicator goes on.
Note: Select boost power if you need an extra strong airflow when the air in
the room is very dirty.All three fan speed lights go on.
Silent mode
When you use the appliance in silent mode, it operates very quietly.
1 Press the on/off button to switch on the appliance.
2 Press the SILENT button to activate the silent mode.
The SILENT light goes on.
If you want to go back to the FAN SPEED mode or AUTO mode, simply
press the FAN SPEED or AUTO button.
Cleaning
Always unplug the appliance before you clean it.
Never immerse the appliance in water or any other liquid.
Never use aggressive or flammable cleaning agents such as bleach or
alcohol to clean any part of the appliance.
Only the pre-filter is washable.All other filters are NOT washable.
Body of the appliance
Regularly clean the inside and outside of the body to prevent dust from
collecting on the inside and outside.
1 Wipe away dust with a soft dry cloth from the body of the appliance.
2 Clean the air inlet and the air outlet with a soft dry cloth.
Pre-filter
The pre-filter is washable.
Download from Www.Somanuals.com. All Manuals Search And Download.
English 15
-
Clean the pre-filter when the first filter replacement light flashes to
ensure optimal functioning of the appliance.
1 Place your fingers in the recesses of the side panels and gently pull
the top part of the front panel towards you.Then lift the hooks at
the bottom of the panel out of the bottom of the appliance.
2 To remove the pre-filter, grab the two projections and pull the filter
towards you.
3 Wash the pre-filter under a running tap. If the pre-filter is very dirty,
use a soft brush to brush away the dust.
Tip:Alternatively, you can clean the pre-filter by removing the dust with a
vacuum cleaner.
4 Air-dry the pre-filter.
Note: Make sure that the pre-filter is completely dry. If it is still wet, bacteria
may multiply in it and shorten the lifetime of the pre-filter.
5 Put the pre-filter back into the appliance.Attach all hooks properly
to the appliance.
Note: Make sure that the side with the two projections is pointing towards you.
6 To reattach the front panel, insert the bottom hooks into the bottom
of the appliance first (1).Then push the panel against the body of the
appliance (2).
2
1
Download from Www.Somanuals.com. All Manuals Search And Download.
16 English
Air quality sensor
Clean the air quality sensor every 2 months for optimal functioning of
the appliance. Clean it more frequently if you use the appliance in a dusty
environment.
Note:When the humidity level in the room is very high, it is possible that
condensation develops on the air quality sensor.As a result, the AIR QUALITY
light on the control panel and the air quality light ring may indicate that the air
quality is bad even though the air quality is good. In this case you have to clean
the air quality sensor or use one of the manual speed settings.
1 Clean the air quality sensor inlet and the air quality sensor
outlet with a soft brush.
2 Remove the air quality sensor cover.
3 Clean the air quality sensor, the dust inlet and the dust outlet with a
lightly moistened cotton swab.
4 Dry them with a dry cotton swab.
5 Reattach the air quality sensor cover.
Filter replacement
Filter maintenance
This appliance is equipped with the Healthy air protect lock to ensure that
the filters are in optimal condition when the appliance is operating.
When one of the filters is almost full and has to be cleaned or replaced,
the appropriate filter replacement light starts to flash.When you do not
replace filter 2, filter 3 and/or filter 4, the appliance stops operating and the
appliance is locked.
When the appliance is locked, the filter replacement light of the filter
concerned lights up on continuously.
Note: Only replace a filter when the corresponding filter replacement
light flashes. If you replace the filter before the filter replacement light starts
flashing, the lifetime counter will not be reset but will continue counting the
lifetime of the previous filter.As a result, the filter replacement light will start
flashing much too soon.
Filter replacement lights
The filter replacement lights indicate which filter has to be cleaned or
replaced.
Download from Www.Somanuals.com. All Manuals Search And Download.
English 17
-
Filter replacement light 1 flashes: filter 1 (the pre-filter) has to be
cleaned. See chapter ‘Cleaning’ for further instructions.
-
Filter replacement light 2 flashes: filter 2 (the formaldehyde filter
(supplied with AC4074) or multi-care filter (supplied with AC4072))
has to be replaced.
-
Filter replacement light 3/4 flashes: the activated carbon filter and the
HEPA filter have to be replaced.
Note:The HEPA filter and the activated carbon filter have a similar lifetime.
Therefore they have to be replaced at the same time.
Filter replacement lock
If you do not replace the filter in time, the appliance stops operating
approx. 2 weeks after the filter replacement light started flashing.When the
appliance is locked, it does not operate until you have replaced the full filter
and pressed the reset button.
Note:When filter replacement lights 2 or 3/4 and REPLACE FILTER on the
control panel are on continuously, the appliance is locked (see section ‘Filter
maintenance’ in this chapter for more information).
How long it takes before the appliance is locked depends on the operating
time and speed level selected after the filter replacement alert.
Approximately 1 day before the appliance locks, it beeps every 30 minutes
to inform you that one of the filters needs to be replaced.
When the appliance is locked, you hear a beep when you press any button.
You can switch off the appliance by pressing the on/off button.
If the appliance is locked:
1 Check which filter needs to be replaced (see section ‘Filter
replacement alerts’).
2 Switch off the appliance and unplug it.
3 Replace the appropriate filter (see section ‘Replacing the filters’).
Download from Www.Somanuals.com. All Manuals Search And Download.
18 English
Replacing the filters
Tip: Place the appliance against a wall for more stability when you remove or
insert filters.
1 Switch off the appliance and unplug it.
2 Place your fingers in the recesses of the side panels and gently pull
the top part of the front panel towards you.Then lift the hooks at
the bottom of the panel out of the bottom of the appliance.
3 To remove filter 1 (pre-filter), grab the two projections and pull the
filter towards you.
4 To remove filter 2 (formaldehyde filter for AC4074 or multi-care
filter for AC4072), grab its tag and pull it towards you.
5 To remove filter 3 (activated carbon filter), grab its tag and pull it
towards you.
6 To remove filter 4 (HEPA filter), grab its tag and pull it towards you.
7 Discard the filter that needs to be replaced and unpack the new
filter.
Download from Www.Somanuals.com. All Manuals Search And Download.
English 19
8 Put filter 4 (HEPA filter) back into the appliance.
Note: Make sure that the side with the tag is pointing towards you.
9 Put filter 3 (activated carbon filter) back into the appliance.
10 Put filter 2 (formaldehyde filter for AC4074 or multi-care filter for
AC4072) back into the appliance.
Note: Make sure that the side with the tag is pointing towards you.
11 Put filter 1 (pre-filter) back into the appliance.
Note: Make sure that the side with the two projections is pointing towards you.
Note: Make sure that all hooks are properly attached to the appliance.
12 To reattach the front panel, insert the bottom hooks into the bottom
of the appliance first (1).Then push the panel against the body of the
appliance (2).
2
13 Put the plug in the wall socket and switch on the appliance again.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
20 English
14 Press the filter reset button with a thin tool.
Note:You do not need to press the filter reset button after cleaning filter 1
(pre-filter).
Note:You cannot reset the appliance when you replace a filter before its filter
replacement light starts flashing.
Note:You cannot reset the appliance if it is not plugged in and switched on.
storage
1 To store the mains cord, wind it round the cord storage facility at
the bottom of the appliance.
Accessories
New filters are available under the following type numbers:
Filter
Type number
Filter 2: Formaldehyde filter
Filter 2: Multi-care filter
Filter 3:Activated carbon filter
Filter 4: HEPA filter
AC4142
AC4141
AC4143
AC4144
Environment
-
Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the environment.
guarantee and service
If you need information or if you have a problem, please visit the Philips
in your country (you find its phone number in the worldwide guarantee
leaflet). If there is no Consumer Care Centre in your country, go to your
local Philips dealer.
Download from Www.Somanuals.com. All Manuals Search And Download.
English 21
Troubleshooting
This chapter summarises the most common problems you could
encounter with the appliance. If you are unable to solve the problem with
the information below, contact the Consumer Care Centre in your country.
Problem
Possible solution
The appliance doesn’t
work.
You ignored the filter replacement alerts.You did not replace the filter
when the filter replacement light started flashing and did not respond
when the appliance started to beep every 30 minutes after approx. 2
weeks.As a result, the appliance is now locked and you have to replace the
filter and reset the appliance (see chapter ‘Filter replacement’) so that the
appliance can operate again.
No air comes out of the
air outlet
The appliance is not switched on. Put the plug in the wall
socket and switch on the appliance.
The air quality is good and the auto mode is activated. In this case, the
appliance switches off automatically when the air is clean to save electricity.
The fan speed does not
change when the AUTO
mode is activated.
When the room becomes dark, the night mode is activated automatically
when the appliance is in auto mode. In this case, the fan speed is set to a
very low level. If you want to change the fan speed, press the FAN SPEED
button one or more times to set the desired fan speed.
The airflow that comes
out of the air outlet is
significantly weaker than
before.
The pre-filter is dirty. Clean the pre-filter (see chapter ‘Cleaning’).
You haven’t removed all packaging material from the filters. Make sure that
you have removed all packaging material.
The air quality does not
improve, even though
the appliance has been
operating for a long time.
One of the filters has not been placed in the appliance. Make sure that
all filters are properly installed in the following order, starting with the
innermost filter: 1) HEPA filter, 2) activated carbon filter, 3) formaldehyde
filter (supplied with AC4074) or multi-care filter (supplied with AC4072),
4) pre-filter.
The air quality sensor is wet.The humidity level in your room is high and
causes condensation. Make sure that the air quality sensor is clean and dry
(see chapter ‘Cleaning’).
The room in which you run the appliance is larger than 55m², which is the
maximum size at which this appliance can operate effectively.
The colour of the air
quality light ring and the
air quality light always stays
the same.
The air quality sensor is dirty. Clean the air quality sensor (see
chapter ‘Cleaning’).
There is not enough ventilation in the room. Open a window, to improve
the air circulation.
I need cleaner air because You can change the air quality sensor sensitivity (see chapter ‘Using the
I have an allergy.
appliance’) to make the appliance clean the air even better.
Download from Www.Somanuals.com. All Manuals Search And Download.
22 English
Problem
Possible solution
The appliance is extra
loud.
You haven’t removed all packaging material from the filters. Make sure that
you have removed all packaging material.
The appliance still indicates Perhaps you did not press the filter reset button properly. Plug in the
that I need to replace a
filter, but I already did.
appliance, press the on/off button and press the filter reset button with a
flat tool.
The appliance stops
operating, although the
power-on light is still on.
The built in quality sensor has determined that the air quality is good and
that the air does not need to be cleaned anymore.When the air quality
deteriorates, the appliance starts running at a low fan speed and noise
level so that the energy consumption is minimised.
The appliance does not
This is a component defect. Contact the Consumer Care Centre in your
work. Fan speed lights 1, 2 country (you find its phone number in the worldwide guarantee leaflet). If
and 3 flash, all other lights there is no Consumer Care Centre in your country, go to your local Philips
are out.
dealer.
The appliance does not
work. Fan speed lights 1
This is a component defect. Contact the Consumer Care Centre in your
country (you find its phone number in the worldwide guarantee leaflet). If
and 2 flash, all other lights there is no Consumer Care Centre in your country, go to your local Philips
are out.
dealer.
AC4074:The appliance
does not work.The air
quality light ring flashes
blue, all other lights are
out.
This is air particle sensor error or an air particle sensor and gas sensor
error. Contact the Consumer Care Centre in your country (you find
its phone number in the worldwide guarantee leaflet). If there is no
Consumer Care Centre in your country, go to your local Philips dealer.
AC4074:The air quality
light ring keeps flashing
purple.
This is a gas sensor error. Switch off the appliance and unplug it.Take the
appliance to your Philips dealer or an authorised Philips service centre.
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2012 Koninklijke Philips Electronics N.V.
All rights reserved.
4222 002 73147
12172
Download from Www.Somanuals.com. All Manuals Search And Download.
|