Phase Technology Speaker HP890i User Manual

Open Ceiling Speaker  
HP890i  
Preliminary Technical Information for System Engineers  
Preliminary Technical Information  
The information in this document reflects  
preliminary data. Items including polar  
plots, frequency, phase and impedance  
response graphs will be added when final  
data are available.  
Key Features  
• BroadBeamHP® waveguide technology  
delivers a consistent dispersion pattern for  
maximum coverage area per speaker (up  
to 10 kHz, EASEdocumented).  
Mounting hardware included  
Specifications: HP890i  
System Type  
8” Coax, compression tweeter w/ 1” exit, open-ceiling, ported (120  
Watt transformer for 25/70.7/100 Volt or voice coil / 8 Ohm direct)  
Frequency Response (- 3 dB)1  
Low Frequnecy (-10 dB)1  
Max. Program Power  
Max. Continuous Power2  
Max. SPL dB @ 1 M  
73 Hz - 22 kHz  
• One 203 mm (8.0 in) treated fiber driver  
and one compression driver with a 25.4 mm  
(1 in) exit mounted to a proprietary cast-  
aluminum M8baffle and heat sink.  
63 Hz - 22 kHz  
250 Watts  
125 Watts  
115 dB  
Sensitivity dB @ 1W/1M3  
Impedance (nominal)  
Coverage Angle (-6 dB @ 2Hz)  
Coverage Angle (-6 dB @ 4 kHz)  
Directivity Factor (Q)  
94 dB  
• 120Watttransformerandhighoutput(115dB)  
forthesoundreinforcementandPAmarkets.  
8 Ohm  
122º  
• Easy-access 5-position selectable tap  
switch for 25, 70.7, and 100 Volt applica-  
tions with voice coil/8 Ohm direct simpli-  
fies ordering and inventory tracking.  
130º  
4.64 (Averaged 100 Hz - 10 kHz); 4.48 @ 2 kHz  
8.34 dB (Averaged 100 Hz - 10 kHz); 6.51 dB @ 2 kHz  
5-Position rotary switch with voice coil direct (8 Ohm)  
Directivity Index (DI)  
Tap Selector  
• Weatherized components for indoor/  
outdoor applications  
Transformer Taps  
70.7 V Output  
120 W 115 dB  
64 W 112 dB  
32 W 109 dB  
16 W 106 dB  
100 V Output  
120 W 115 dB  
64 W 112 dB  
32 W 109 dB  
16 W 106 dB  
25 V Output  
• 94 dB Average sensitivity offers high-output  
capabilities and reduced amplification costs.  
16 W 106 dB  
8 W 103 dB  
3.8 W 100 dB  
1.9 W 97 dB  
• Includes hanging hardware with aircraft  
cables and integrated SpeedClamp™ self-  
locking wire grip for fast, easy & secure  
installation. Also includes Euroblock con-  
nector & terminal weather boot.  
Transducers  
Low Frequency Driver  
High Frequency Driver  
Low Frequency Voice Coil  
Crossover Frequency  
1 x 203 mm (8 in) Treated fiber cone, cloth surround  
1 Compression driver with waveguide and 25.4 mm (1 in) exit  
34 mm (1.36 in)  
• Optional accessory: surface-mount  
bracket (AC-RS-SM8).  
2.4 kHz  
• High quality black or white paint finish.  
Network Type  
Low Pass  
High Pass  
Enclosure Material  
Motor Board  
Grille  
Inputs  
Colors  
Height  
Diameter  
12 dB per octave, 2nd order  
12 dB per octave, 2nd order  
Injection molded ABS, glass fiber reinforced  
Cast aluminum with integrated heat sink  
Iridite-plated steel with powder-coat finish  
4 Pin, 5 mm Euroblock for individual or daisy chain connection  
Black or white  
437.7 mm / 17.23 in  
376.5 mm / 14.82 in  
10.0 kg / 22.1 lbs  
N/A  
Description  
The HP890i is a premium 8.0” 2-  
way, ported high-efficiency, high-SPL  
loudspeaker for distributed or 8 Ohm  
applications. The HP890i incorporates a  
dedicated 8.0” treated fiber driver and  
high-power compression transducer  
with a BroadBeamHP® waveguide to  
deliver a consistent dispersion pattern  
and superb intelligibility for the fore-  
ground music, sound reinforcement and  
PA markets. The HP890i incorporates a  
120 Watt transformer with a 5-position  
tap switch and voice coil/8 Ohm direct  
position. Hanging hardware is included  
and features a fast-action SpeedClamp™  
for easy and secure installation.  
Weight  
Shipping Weight  
Accessories  
Included  
Optional  
Hanging hardware, Euroblock connector & terminal weather boot  
Surface-Mount Bracket (AC-RS-SM8)  
1 per box  
Packaging  
1
2
3
Frequency response is measured in full space.  
Continuous power rating, EIA-426-B test.  
2.83 Volts at a distance of 1 meter.  
Applications  
Engineered for installations requiring  
full-range background/foreground music  
plus paging, the HP890i delivers a smooth  
SoundTube continually develops new product innovations and improvements. Updates to existing  
products without prior notice are an example of SoundTube’s drive for constant improvement.  
© 2006 SoundTube Entertainment. All rights reserved. PN TS-HP590 REV 04.04.06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Open Ceiling Speaker  
HP890i  
Preliminary Technical Information for System Engineers  
impedance of 8 Ohms and be available for  
25/70.7/100 Volt modes with a voice coil/8  
Ohm direct. The frequency-dividing net-  
work shall have a crossover frequency of 2.4  
kHz with a slope of 12 dB per octave (2nd  
order). Rated power capacity shall be at least  
125 Watts continuous power (RMS), and  
shall conform to EIA-426-B testing. Maxi-  
mum continuous output at 1 meter shall be  
115 dB.  
ety of standard measurement techniques,  
including Measured Length Sequence  
(MLS) and Time Delay Spectrometry  
(TDS). Performance, development and  
data acquisition tools include: Gold Line  
TEF 20, CLIO, LMS, LEAP, and propri-  
etary modeling software. EASE™ data  
are acquired through an automated TEF  
20/Outline/EASE™ interface.  
Patented SoundTube  
Technologies  
SoundTube Entertainment is consis-  
tently developing new technologies that  
enhance audio product performance.  
SoundTube Entertainment innova-  
tions are protected by multiple U.S. and  
international patents, which explicitly  
cover SoundTube dome, enclosure,  
mounting and dispersion technolo-  
gies. SoundTube Entertainment actively  
defends it patents in order to protect  
SoundTube resellers and end-users.  
EASE™ Data – 3-D polar plots.  
The low-frequency transducer shall have a  
treated fiber cone and cloth surround.  
SoundTubeSPEC™ – Proprietary  
SoundTube speaker placement software.  
Installation for the HP890i shall be by 10’  
aircraft cable affixed to the speaker chassis via  
hook. For seismic and safety redundancy, a  
secondary aircraft cable shall be included and  
shall attach to the speaker chassis via hook  
and cable system. The external wiring shall  
be a 4-pin 5 mm Euroblock connector for 8  
Ohm or distributed systems and shall accept  
from 10 – 22 gauge wire. The system shall be  
for indoor and outdoor applications and have  
a weather-resistant terminal boot covering all  
wire connections.  
Architectural Specifications  
Technical Data and  
Specification Tools  
The loudspeaker shall consist of a 203  
mm (8 in) low-frequency transducer and  
a high frequency transducer with a 1”  
exit and a frequency-dividing network  
installed in a ported enclosure. The low-  
frequency voice coil diameter shall be 34  
mm (1.36 in).  
Technical Data  
SoundTube Entertainment strives to  
provide complete and effective technical  
information and data to dealers, engi-  
neers and designers. All data are avail-  
able from SoundTube Entertainment or  
at www.soundtube.com.  
The performance specifications of a  
typical production unit shall be as follows:  
Useable frequency response shall extend  
from 63 Hz – 22 kHz (-10 dB, no external  
equalization). Measured sensitivity (2.83  
Volt input, 1 meter) shall be at least 94  
dB. The speaker shall have a nominal  
The enclosure shall be constructed of  
injection-molded, glass reinforced ABS. The  
grille shall be constructed of iridite-plated,  
powder-coated steel for lasting performance  
Data Acquisition  
All performance data acquired at  
SoundTube’s Technical Measurement  
Center (TMC) are analyzed using a vari-  
Polar Plots  
N/A  
Technical data, EASE plots, SoundTubeSPEC software & product downloads available at www.soundtube.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Open Ceiling Speaker  
HP890i  
Preliminary Technical Information for System Engineers  
in the elements. Overall cabinet dimen-  
sions shall be no more than 437.7 mm  
(17.23 in) in height by 376.5 mm (14.82 in) in  
diameter and weigh no more than 10.0 kG  
(22.1 lbs).  
Mechanical Drawings  
The HP890i shall ship with hanging  
hardware, Euroblock connector and ter-  
minal weather boot. Optional accessories  
for the HP890i include surface-mount  
bracket (AC-RS-SM8), 20’ hanging cable  
(AC-RS-HH-20) and 10’ split loom tubing  
(AC-SLT-10) for architectural applications.  
363.6 mm (14.31 in)  
The system shall be the HP890i with  
hanging hardware for both low- and high-  
impedance applications.  
SoundTube Entertainment  
6430 North Business Park Loop  
Park City, Utah 84098  
Phone 435.647.9555  
307.3 mm (12.10 in)  
Fax  
435.647.9666  
Toll Free 800.647.TUBE  
Included Accessories  
Hanging Hardware: Main & Safety  
Cables w/ SpeedClamp™  
SoundTube’s hanging cable kit incorpo-  
rates hanging & safety cables & fasten-  
ers for an integrated and easy-to-install  
system. Hanging & safety cables are  
infinitely adjustable to 2.74 M (9.0 ft).  
Optional Accessory  
463.80 mm (18.26 in)  
346.45 mm  
(13.64 in)  
Surface-Mount Bracket (AC-RS-SM8)  
SoundTube Entertainment manufactures a complete line of speakers for:  
Open-Ceiling • In-Ceiling • Surface-Mount • Outdoor • Sound-Focusing  
All SoundTube products are designed and engineered in the USA.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Philips Air Conditioner 3160 User Manual
Philips Toaster L1700 User Manual
PLUS Vision Projector U7 137SF User Manual
Poulan Lawn Mower PXT12538 User Manual
Poulan Snow Blower 421895 User Manual
Poulan Trimmer 545146921 User Manual
Pride Mobility Mobility Aid Jazzy 1650 2EHD User Manual
Pro Ject Turntable Pro Ject RPM 13 Genie User Manual
Promise Technology Network Card TX2200 User Manual
PYLE Audio Microphone PDWM2200 User Manual