Phase Technology Speaker CM1001d User Manual

In-Ceiling Speaker  
CM1001d  
Technical Information for System Engineers  
Key Features  
• One 254 mm (10.0 in) polypropylene woofer.  
• 150 Watt optional transformer and high  
output (115.5 dB) for the sound rein-  
forcement and PA markets.  
• Rapid installation blind-mount, fixed-  
wing mounting mechanism mount-  
ing mechanism with constant tension  
design affixes to ceiling thicknesses  
ranging from 6.4 mm (0.25 in) to 42.9  
mm (1.69 in).  
Tile bridge included  
Specifications: CM1001d  
System Type  
10” Subwoofer, in-ceiling, ported (150 Watt optional  
transformer for 25/70.7/100 Volt or 4 ohm direct)  
• Separate tool-free magnetic grille &  
bezel assembly for ease of install &  
in-field painting.  
Impedance (nominal) 1  
4 ohm  
Sensitivity dB @ 2.83V/1M  
Sensitivity dB @ 1W/1M 2  
Distance Factor  
Frequency Response (- 3 dB) 3  
Frequency Response (-10 dB) 3  
Max. Program Power 4  
Max. Continuous Power RMS 5  
Max. UL program power  
Max. Power SPL @ 1 M 6  
Max. SPL @ x% distortion 7  
Coverage Angle (-6 dB @ 2 kHz)  
96.5dB  
93.5dB  
N/A  
53 Hz - 120 kHz  
40 Hz - 300 kHz  
300w  
150w  
100w  
115.5dB  
N/A  
N/A  
• Iridite-plated steel grille with protective  
powder-coated finish for lasting durability.  
• Easy access 5-position selectable tap  
switch for 25, 70.7, 100 Volt and low  
impedance applications simplifies  
ordering & inventory tracking.  
• 93.5 dB sensitivity (1w/1m)offers high-  
output capabilities & reduced amplifica-  
tion costs.  
Coverage Angle (-6 dB @ 10 kHz) N/A  
• UL 2043 & 1480 approval pending.  
Directivity Factor (Q)  
Directivity Index (DI) dB  
Tap Selector  
N/A  
N/A  
• Included accessories: Tile bridge,  
Euroblock connector & paint mask.  
5-Position rotary switch with 4 ohm direct  
Transducer - Low Frequency Driver 254mm (10in) Polypropylene cone, butyl rubber surround  
Transducer - High Frequency Driver N/A  
• Optional accessories: Pre-construction  
bracket, junction box.  
Low Frequency Voice Coil  
Crossover Frequency  
Network Type: Low Pass  
Network Type: High Pass  
Enclosure Material  
Motor-board  
Grille  
Inputs  
Colors  
Backcan Diameter  
Backcan Height  
Visible Diameter  
Visible Height  
Mounting Hole Diameter  
Min / Max Ceiling Thickness  
Weight  
Shipping Weight  
Accessories  
Included  
35.0mm 1.38in  
100.0 kHz  
6dB per octave, 1st order  
N/A  
Drawn steel backcan with ABS baffle  
N/A  
Iridite-plated steel with powder-coat finish  
4 Pin, 5mm Euroblock for individual or daisy chain connection  
Black or white  
11.68 in / 296.7 mm  
11.77 in / 299.0 mm  
14.76 in / 374.9 mm  
1.08 in / 27.4 mm  
12.75 in / 323.9 mm  
0.25 in / 6.4 mm – 1.69 in / 42.9 mm  
27.0 lb / 12.3 kg  
Description  
The CM1001d is an 10” in-ceiling  
subwoofer design that delivers additional  
low-end response (40 Hz) for satellite/  
subwoofer applications. The CM1001d  
speaker design incorporates a low-profile  
grille and 5-position tap switch with 4 Ohm  
direct. All mounting hardware is included  
and features a fast and secure fixed-wing  
mounting system.  
Applications  
32.0 lb / 14.5 kg  
Designed for in-ceiling background  
subwoofer applications, the CM1001d  
includes a proprietary fixed-wing con-  
stant-tension mounting system for ease  
of installation. True low-end response (40  
Hz) and high sensitivity (93.5 dB 1W/1M)  
make the CM1001d ideal for additional  
bass response in convention centers, air-  
ports and other large venue in-ceiling  
subwoofer applications.  
Tile bridge, Euroblock connector & installation aid  
Pre-Construction Bracket (AC-CM8-PCB),  
Junction Box (AC-CM-JBOX)  
Optional  
Packaging  
1 per box  
Transformer Taps  
1
70.7 V Output  
100 V Output  
25 V Output  
19w 106.5dB  
9.5w 103.5dB  
4.8w 100.5dB  
2.4w 97.5dB  
Impedance listed per IEC 60268-5 with  
a minimum less than 80% the nominal  
impedance  
150w 115.5dB 150w 115.5dB  
2
3
75w 112.5dB  
38w 109.5dB  
19w 106.5dB  
75w 112.5dB  
38w 109.5dB  
1w1m sensitivity determined using  
nominal impedance  
Frequency response measured in half  
or full space as dictated by speaker  
mounting configuration  
Patented SoundTube  
Technologies  
4
Max program power is 3 dB above max  
continuous power  
SoundTube Entertainment is constantly  
developing new technologies that enhance  
audio product performance. SoundTube  
5
6
7
Continuous power rating, EIA-426-B test  
Max output based on max continuous power  
Max useable SPL based on testing  
by NWAA Labs  
© 2007 SoundTube Entertainment. All rights reserved. PN TS-CM590 REV 11.06.07  
SoundTube continually develops new product innovations and improvements. Updates to existing  
products without prior notice are an example of SoundTube’s drive for constant improvement.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
In-Ceiling Speaker  
CM1001d  
Technical Information for System Engineers  
Included Accessories  
wiring input connector shall be a 4-pin, 5 mm  
Euroblock for 4 Ohm or distributed systems  
and shall accept from 10 – 22 gauge wire.  
The maximum backcan dimensions shall  
be no more than 299 mm (11.77 in) in height  
by 296.7 mm (11.68 in) in diameter. The maxi-  
mum visible dimensions shall be no more  
than 27.4 mm (1.08 in) in height by 374.9 mm  
(14.76 in) in diameter. The backcan shall be  
constructed of iridite-plated steel.  
325.1 mm  
(12.80 in)  
600.1 mm  
(23.62 in)  
Min.  
4 mm ( 0.16 in)  
Max.  
49 mm (1.91 in)  
The system shall include a 16-gauge galva-  
nized steel support backing plate (tile bridge)  
to reinforce the ceiling material and tile sup-  
port rails. The maximum tile bridge dimen-  
sions shall be no more than 600.1 mm (23.62  
in) in length by 428.2 mm (16.86 in) in width  
and 10.4 mm (0.41 in) in thickness with 325.1  
mm (12.80 in) cutout for speaker mounting.  
Fixed Wing Mounting System  
428.2  
(16.86 in)  
Tile Bridge  
The grille shall be constructed of iridite-  
plated, powder-coated steel with an ABS  
bezel for lasting performance. The affixed  
grille and bezel shall be mounted to the  
speaker enclosure (backcan) via magnetic  
strip. Also included are a paint mask for in-  
field painting and an installation aid that  
serves as a handhold during mounting.  
Paint Mask  
Suspension Cable & Hardware  
Optional Accesories  
The CM1001d has an optional Pre-Con-  
struction Bracket (AC-CM8-PCB) that shall  
be compatible with an optional Junction Box  
(AC-CM-JBOX). An 18-gauge wire whip and  
Euroblock connector shall be included with  
the junction box. The maximum dimensions  
of the Pre-Construction Bracket shall be no  
more than 635 mm (25.0 in) in length by 457.2  
mm (18.0 in) in width and 127 mm (5.0 in) in  
thickness with a 326.5 mm (12.85 in) cutout  
for speaker mounting.  
Pre-Construction Bracket (AC-CM8-PCB) Junction Box (AC-CM-JBOX)  
The system shall be the SoundTube  
CM1001d subwoofer for both low & high  
impedance applications.  
SoundTube Entertainment  
6430 North Business Park Loop  
Park City, Utah 84098  
Phone 435.647.9555  
Fax  
435.647.9666  
Toll Free 800.647.TUBE  
All SoundTube products come  
with a 5-year limited warranty.  
SoundTube Entertainment manufactures a complete line of speakers for:  
Open-Ceiling • In-Ceiling • Surface-Mount • Outdoor • Sound-Focusing  
All SoundTube products are designed and engineered in the USA.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pentair Network Card 8 and 4 User Manual
Philips Computer Drive PCA532K User Manual
Philips Kitchen Grill HD2415 User Manual
Philips Telephone VOIP841 User Manual
Philips Work Light ELC 10H User Manual
Pioneer Stereo System HTS 260 User Manual
Poulan Trimmer 545186845 User Manual
Precor Elliptical Trainer EFX521s User Manual
Princeton Photo Printer FC 446 021 U User Manual
ProForm Treadmill PFTL998062 User Manual