ECD2
Compact Disc Player
Owners Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
This page has intentionally been left blank.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
i
Introducing the Perreaux
ECD2 Compact Disc Player
Congratulations on your Perreaux ECD2 purchase. To realise the full potential
of your unit you need to appreciate all aspects of its operation.
Before installing the ECD2 into your system, read the entire manual carefully.
Endeavor to understand every detail by familiarising yourself with the controls
and features as you read. You will find it easier to install using the relevant
sections of this manual as a reference.
We have attempted to explain every feature and operational facet clearly and
concisely. In the event that something is still unclear to you, your Perreaux
dealer will be happy to assist you further.
Read this manual, install your unit correctly and realise the sonic significance of
your investment in Perreaux.
Perreaux products are designed to provide the utmost in sonic realism and
electronic reliability with a functional yet elegant appearance that reflects the
care and craftsmanship applied during all stages of construction.
Features at a
Glance
àꢀRugged build quality
àꢀMultiple regulated power supplies
àꢀDual 20-bit Burr Brown DAC
àꢀHDCD decoding
àꢀHigh speed processing with 96kHz over-sampling
àꢀDigital output
àꢀFull function infrared remote control
To maintain the consistently high quality that you expect from us, and we expect
from ourselves, Perreaux products are handcrafted.
We maintain the human-link throughout, from design and construction, through
to the ultimate test, your music, your system, your ears.
Because we too listen to our products, we know that with your Perreaux you will
discover many more of the musical secrets we strive to reveal.
From all of us at Perreaux Industries Limited, thank you for choosing the
Perreaux ECD2 compact disc player.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ii Important Safety Instructions
Note:
All safety and operation instructions should be read carefully before the
ECD2 is operated. Keep the Owners Manual in a safe place for future
reference.
àꢀThe ECD2 should not be used near water, for example near a bathtub,
kitchen sink, in a wet basement, near a swimming pool, etc.
àꢀThe ECD2 should be rack mounted only in a heavy-duty rack or stand that
is recommended for audio equipment use.
àꢀMounting to a wall or ceiling should be via a heavy-duty bracket or shelf
designed for audio equipment use.
àꢀThe ECD2 should be situated away from heat sources such as radiators,
stoves, or other appliances that produce excessive amounts of heat.
àꢀDO NOT place the ECD2 directly onto carpeted surfaces.
àꢀAvoid exposing the ECD2 to extremely high or low temperatures.
àꢀThe ECD2 should be connected to a mains power supply only of the type
described in the operating instructions, or as marked on the rear of the unit.
àꢀDO NOT disconnect the mains earth from the system.
àꢀThe mains power supply cord should be routed so that it is not likely to be
walked on or pinched by items placed on or against it.
àꢀThe power cord of the ECD2 should be unplugged from the mains outlet
when the unit is to be left unused for long periods or when attempting to
connect or disconnect cables and before cleaning your unit.
àꢀCare should be taken so that objects and/or liquids do not accidentally fall
inside the ECD2.
àꢀPlease keep electrical equipment out of reach of children.
àꢀPlease unplug sensitive electronic equipment during electrical storms.
àꢀPlease replace any fuse with the value and type specified.
àꢀAvoid operating the ECD2 with the cover removed.
àꢀDO NOT bypass any fuse.
àꢀDO NOT attempt to repair the ECD2. In the event of a problem, please
contact your Perreaux dealer.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
iii
Table of Contents
i
ii
iii
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Introducing the Perreaux ECD2 Compact Disc Player.......................................... 3
Important Safety Instructions.................................................................................... 4
Table of Contents......................................................................................................... 5
Unpacking and Placement......................................................................................... 6
Instant Install................................................................................................................ 7
Front Panel Functions................................................................................................. 8
Rear Panel Functions ................................................................................................ 10
Remote Control Functions ....................................................................................... 12
Special Design Philosophies .................................................................................... 15
Special Design Features............................................................................................ 17
Maximising System Potential................................................................................... 18
Care and Maintainance ............................................................................................ 19
Warranty Information and Obtaining Service ..................................................... 20
Extended Warranty Registration Form ................................................................. 21
Faultfinding Your System......................................................................................... 22
Specifications.............................................................................................................. 27
Physical Dimensions.................................................................................................. 29
Contact Details........................................................................................................... 30
5
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Unpacking and Placement
The ECD2 is packaged for maximum protection. Please carefully read the
instructions below before proceeding to unpack the unit. Be extremely careful.
Unpacking
àꢀInspect both ends of the cardboard box and open at the end without the
Procedure
central staple by slitting the reinforced tape at either side.
àꢀFold back the flaps and tip the package on end and the inner box will
slide out.
àꢀLay the inner box down flat and upright, open it conventionally by
separating the top tray from the bottom.
àꢀThe product can now be removed from the bottom packaging. This will
be easier if you have someone to help you by holding the base of the
box.
àꢀAlternately, the bottom tray and player could be tipped upside down
and the bottom packaging removed. If opened in this manner, please
ensure that you turn the contents over again.
Note:
Be very careful to secure the unit if you are planning to flip the package
upside down.
àꢀRemove the two white polystyrene protectors off either side of the
player , leaving the black material covering.
àꢀPull back the material and remove the protective black tissue from the
front panel.
The player is now unpacked and ready for further installation.
Note:
Please retain all packaging material for future transport.
Box 1 x ECD2 Compact disc player
Contents
1 x ECD2 Product manual
1 x Perreaux remote control
2 x AAA batteries
1 x Detachable AC power cord
Placing The ECD2 should generally be placed close to your amplifier, keeping the
Your ECD2
interconnect cabling short.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Instant Install
If you are like us, the first thing you will want to do is to play your favourite
piece of music through your new ECD2. The following instructions are written
to enable you to achieve this as quickly as possible. These are not
comprehensive instructions, but are designed to enable you to play music now!
Note:
Please take the time to read the ECD2 manual thoroughly as it
incorporates many features, which will enhance its operation.
Placement
Best results will be achieved when placed on a solid surface. DO NOT place on
a carpeted floor or cover the player!
Turn off associated components
This minimises the potential to damage any other components when connecting
your ECD2 into the system.
Connect ECD2 to amplifier
Connect the output of the ECD2 to the un-balanced (RCA) inputs at the rear of
your amplifier.
Note:
Try to keep all interconnect cables as far from loudspeaker cables as
possible and well away from all AC mains leads.
Switch on ECD2
After checking the supply voltage compatibility with the voltage rating on the
ECD2 rear panel, insert the power cord-set supplied into the rear of the unit and
into the wall. Switch on the socket at the wall and power up the ECD2 by
depressing the switch on the front panel.
Switch on your amplifier
Make sure your amplifier is connected to the mains and switch it on.
Insert your favourite CD
Open the disc drawer by pressing the ‘O/C’ button and insert your favourite CD.
Press ‘PLAY’ on the ECD2
Increase the volume
Slowly increase the volume control of your amplifier to achieve a comfortable
listening level.
CONGRATULATIONS!
Now that you have achieved your first objective, sit back, relax and please read
the rest of the manual at your own pace, in your favourite armchair, whilst
sipping a hot cup of coffee. You’ll find the whole experience much more
pleasurable whilst listening to music.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Front Panel Functions
Power Switch
Depress this switch to turn power ON. Depress the switch again to turn the unit
OFF.
Vacuum Fluorescent Display
Display provides information regarding the status of the ECD2 and track/time
information for the disc being played.
‘RPT’ Button
Allows you to repeat the current track or the entire disc continuously until the
feature is cancelled by pressing the RPT button or pressing ‘■’. The RPT button
steps sequentially through the available options. Pressing the button once
repeats the current track, displaying REPEAT 1 in the display. Pressing a
second time repeats the entire disc, displaying REAPEAT ALL in the display.
Press a third time to cancel the REPEAT function.
Note:
The REPEAT function is automatically cancelled when the disc drawer is
opened.
‘O/C’ Button
When the disc drawer is closed, pressing this button opens the drawer. To close
the drawer, press the button again. Pressing ‘►’ or lightly pushing on the
drawer itself can also close the drawer. This can also be performed via the
remote control.
When the drawer is open, the display reads ‘OPEN’. When it is closed with no
disc, the display reads ‘NO DISC’. When the drawer closes with a disc inserted,
the display will show the number of tracks and the total time of the disc.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
‘►’ Button
Press this button to start playing the disc. If the disc drawer is open, it will close
automatically. The number of the track being played and the and the elapsed
time will be shown in the display, along with the PLAY indicator.
‘■’ Button
This button stops a disc that is playing and resets the player, i.e. if play is
resumed, the disc will start over from the first track.
‘ꢀ’ Button
Pressing this button returns to the beginning of the current track. Pressing twice
quickly in succession returns to the beginning of the previous track. The new
track number is shown in the display.
‘ꢁ’ Button
Pressing this button advances to the beginning of the next track. The new track
number is shown in the display.
‘STBY’ Button
This button puts the ECD2 into STANDBY mode, as indicated by the green
standby light. The display goes dark and the unit will not operate.
HDCD Indicator
This light will illuminate to indicate that an HDCD encoded disc is being played.
IR Sensor
This is the infrared sensor to receive commands transmitted from the remote
control.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Rear Panel Functions
Caution!
Please make all changes at minimum volume setting. Only increase the
volume after the connections have been made.
Digital Output
Using a standard 75Ω coax digital cable with RCA termination, connect the
digital output to the coax digital input on the external D/A converter.
These high quality gold plated sockets are highly conductive, corrosion resistant,
and provide less potential for corrosion induced distortion.
Refer to Chapter 13 “Specifications” for more details.
Analog Output
Standard single-ended outputs (RCA) supplying analog signals to the source
inputs of an audio preamplifier, integrated amplifier or receiver.
Using quality audio interconnect cables, connect the left channel output of the
ECD2 to the left channel input on the preamplifier or other component and the
right channel output to the right channel input on the preamplifier or other
component.
Refer to Chapter 13 “Specifications” for more details.
Serial Number
The serial number is unique to your ECD2. Please record this number and store
it in a safe place. For any service related enquiry, please be prepared to quote
the product serial number to Perreaux personnel or their service representative.
Input Voltage and Fuse Rating
Input Voltage
It is important that the ECD2 be operated from the correct AC mains voltage.
This unit is factory set for the voltage applicable to the original country of
destination.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
The ECD2 will operate satisfactorily within a voltage variation of up to ±5% of
that voltage at which the unit has been set.
If you require the voltage setting to be altered, e.g. relocation to another area,
city or country, or extraordinarily high or low voltages, please contact your
Perreaux dealer. Qualified service personnel can only perform this modification.
Caution!
Caution!
Caution!
Never attempt to connect the unit to the incorrect voltage. Severe
damage can result from applying incorrect voltage to the unit.
Fuse Rating
The fuse rating displayed here, refers to the rating of the mains inlet fuse.
For more information on fuse ratings, please refer to Chapter 13
“Specifications”.
Never replace the fuses with any other ratings other than the one
specified.
AC Mains Input and Fuse
AC Mains Input
An IEC-standard mains input is provided at the rear of the unit. The AC cord set
is removable, allowing you to upgrade to a cord set of your preference.
Prior to connection to the AC mains, please check the voltage label on
the rear panel to ensure that your unit conforms to the power supply in
your area. Never attempt to connect the unit to the incorrect voltage.
Severe damage can result from applying incorrect voltage to the unit.
Mains Fuse
The ECD2 is equipped with a user serviceable AC mains fuse. In the event of
fuse failure, always replace with the same type and value fuse. Remember, fuses
do not usually blow without a reason. Any doubts about fuse failure should be
conveyed directly to your Perreaux dealer.
For more information on fuse ratings, please refer to Chapter 13
“Specifications”.
Caution!
This is the ONLY user accessible fuse.
Never replace the fuses with any other ratings other than the one
specified on the rear panel.
Always ensure your ECD2 is disconnected from the mains supply before
attempting to change the mains fuse.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Remote Control Functions
The ECD2 comes supplied with a 29 button Perreaux Universal infrared remote
control.
The remote control uses 2 x AAA batteries and may be changed by sliding
forward the plastic cover located on the bottom of the remote.
Note:
Press the white
button on the remote to select the code-set required
to control the ECD2.
The ECD2 uses the following functions:
Open/Close
When the disc drawer is closed, pressing this button, labeled O/C, opens the
drawer. To close the drawer, press the button again.
When the drawer is open, the display reads ‘OPEN’. When it is closed with no
disc, the display reads ‘NO DISC’. When the drawer closes with a disc inserted,
the display will show the number of tracks and the total time of the disc.
Program
Pressing this button, labeled PROG, allows you to memorise as many as 20
tracks on the current disc for playback in a specific order. For example, you
could instruct the ECD2 to play track 6, followed by track 10, followed by track
2. To begin a program:
àꢀInsert a disc and close the drawer. The ECD2 will read the
contents of the disc.
àꢀPress the PROG button on the remote control.
The
PROGRAM indicator will show on the display, along with
‘P:00’ indicating that the unit is waiting for the first track to
be memorised.
àꢀEnter the first track number using the DIRECT ACCESS
buttons. Your selection will be memorised automatically and
the display will change to ‘P:01’, indicating that one track has
been memorised.
Continue entering the rest of your
selections using the DIRECT ACCESS buttons.
Note:
There is no need to press the PROG button, as each selection is
memorised as it is entered.
Once you have memorised a play list, the ECD2 remains in PROGRAM mode
until the disc drawer is opened or the STOP button is pressed twice in
succession. If you press the PLAY button, the memorised program will play
instead of the entire disc, starting with the first selection in the memorised list.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Search Backward /
Search Forward
These buttons, labeled ꢂ and ꢃ, fast reverse or fast forward through the
currently playing disc as long as they are pressed.
Direct Access
These numeric buttons are used to directly access a track from the remote
control instead of stepping through using the TRACK buttons.
The first ten tracks on a disc can be selected by pressing the corresponding
button on the remote control. For example, to play the eighth track, press
.
When accessing track numbers greater than 10, press followed by the track
number. For example, to select track 15, press
followed by and
.
The number of the selected track will appear on the display.
There is also a four by four matrix of track numbers (1 – 16) at the right side of
the display. This indicates all of the tracks on the disc. If there are more than
16, all of the digits will illuminate, accompanied by the word OVER, regardless
of which track is playing. This matrix is independent of the main numeric area
of the display, which will always indicate the currently playing track, even if
above 16.
The DIRECT ACCESS buttons may also be used to memorise tracks in
PROGRAM mode.
Track Forward /
Track Backward
These buttons are used to select tracks on the disc. When a disc is playing,
pressing the TRACK forward button advances to the beginning of the next track.
Pressing the TRACK backward button returns to the beginning of the current
track. Pressing twice quickly in succession returns to the beginning of the
previous track.
Play
Press the PLAY button to start playing the disc. If the disc drawer is open,
it will close automatically. The number of the track being played and the
elapsed time will be shown in the display, along with the PLAY indicator.
Normally, the disc will start playing with the first track. However, you can
select a different track using the TRACK buttons or the DIRECT ACCESS
buttons before pressing PLAY to start playing a different selection.
Pause
This button is used to temporarily suspend play. The disc continues to spin and
play will be resumed from the current position. The PAUSE indicator will show
in the display. To resume playing the disc, press the PAUSE button again or
press the PLAY button.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Stop
This button stops a disc that is playing and resets the player, i.e. if play is
resumed, the disc will start over from the first track. Pressing the STOP button
twice in quick succession cancels any programmed selections.
Random
This instructs the ECD2 to play tracks from the entire disc in random order.
Once all of the selections have been played once, the disc will stop playing,
unless the REPEAT function is utilised, in which case the random play will
continue until the STOP button is pressed. When the RANDOM feature is in
use, the word RANDOM is shown in the display.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Special Design Philosophies
Perreaux has been designing and manufacturing only the highest quality audio
componentry for more than a quarter of a century. Technology has continued to
evolve rapidly over that time and our knowledge and application of design,
materials and manufacturing techniques has advanced in tandem with this.
Today’s Perreaux range comes closer to fulfilling our shared vision than at any
other time in the past.
To follow is a discussion on some of Perreaux design philosophies that have
been incorporated into the entire range.
Minimalist Leading British architect, John Pawson, writes:
Design
“The Minimum can be defined as the perfection that an object
achieves when it is no longer possible to improve it by subtraction.
This is the quality that an object has when every component, every
detail, and every junction has been reduced or condensed to the
essentials. It is the result of the omission of the inessentials”.
Perreaux has historically embraced the minimalist ethic from an audio design
perspective only. The concept of “less equating to more” has been at the heart
of all Perreaux audio designs for more than a quarter of a century.
Minimalist Electronics
We wish to maximise the quality of your listening pleasure by keeping the
componentry and signal path as uncluttered, short and clean possible. All
components in the signal path, even those of the highest quality have an effect
on the signal, thereby altering the quality of the reproduction in some way. Our
aim is to recreate in its entirety, the original performance by not adding or
subtracting anything, irrespective of the source.
Minimalist User Interface
We carefully study the user interface and par down the number of buttons and
associated clutter leaving just the essential and no more. How tempting it has
been over the years to loose sight of our core values as technology or trends
have made it possible. That is one of the reasons why our older products still
have such a high resale value today. The user interface has and always will
remain simple, free from adornments, clean and uncluttered.
Minimalist Aesthetics
Our products appeal to those who seek the ultimate in audio exclusivity, namely
the perfect blend of “form and function”.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
“Form and function” are both tough masters. That is why our amplifier heat
sinks are not hidden, but instead feature prominently in all our designs. We
make no excuses for producing some of the most distinctive high-end audio
products on the planet. We let “form and function” blend together in perfect
harmony. This surely is the essence of true minimalist utilisation.
Minimalism in a Wider Context
John Pawson writes:
“Clearly simplicity has dimensions to it that go beyond the purely
aesthetic: it can be seen as the reflection of some innate, inner
quality, or the pursuit of philosophical or literary insight into the
nature of harmony, reason, and truth”.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Special Design Features
Rugged Build Mechanical strength has been a hallmark of Perreaux products since the
Quality company first started production back in 1974. The concept behind the physical
design and construction is that each structural member should contribute to both
rigidity and performance.
Multiple There is a separate regulated power supply for each section of the CD player.
Regulated One positive supply and one negative supply for the sensitive analog output
Power
Supplies
stage, another one for the DAC section, another for the clock generation of the
DAC section and a further supply for the microcontroller and display. The
advantage of this is that there is complete isolation from stage to stage, ensuring
the analog section is completely free from digital noise.
Dual 20-bit The ECD2’s precision transport is backed up by Burr Brown’s PCM1732 digital
Burr Brown to analog converter, featuring HDCD decoding. The dual 20-bit, multi-level
DAC
Delta-Sigma operation with 8x oversampling ensures the ECD2 will deliver a
high level of audio performance.
HDCD® High Definition Compatible Digital™ (HDCD®) is an encoding technique that
Decoding allows a CD to have greater dynamic range, focused 3D soundstage, reduced
distortion, and increased detail. When playing HDCD encoded discs, the ECD2
can reproduce as much as 20-bit dynamic range. HDCD discs are identified by
an HDCD logo on the package.
No user action is required to play an HDCD encoded disc. The player
automatically senses HDCD encoding and enables the necessary circuitry. The
HDCD indicator on the front panel will light to indicate that an HDCD disc is
being played.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Maximising System Potential
Interconnects An often-ignored area in high fidelity systems is the cabling connecting the
and Speaker various components. Interconnect leads should be high quality cable with
Cables substantial terminations. Gold plate is inherently resistant to corrosion, and an
excellent conductor. The presence of corrosion induces distortion and poor
conductivity will seriously interfere with sound quality. Terminations must plug
snugly into sockets to maintain maximum conductivity and to avoid annoying
earthing problems.
Speaker cabling is equally critical. Use only solidly constructed cable of high
purity copper or silver content.
Again, gold plated terminations are
recommended, of the spade or banana plug type. Use cables of equal length and
as short as possible to maintain uniform electrical resistance at the lowest
possible level. If your amplifier is closer to one of your speakers than the other,
avoid coiling the longer lead as this can create inductance, with the potential of
reduced high frequency performance. Keep all connections clean, firm and
tight. The traditional adage that a chain is only as strong as its weakest link
most certainly applies to audio systems.
Positioning Positioning of your source equipment (tuner, video, disc, tape, record, decks) is
Ancillary
important. To avoid airborne frequency peaks, place them well away from your
Equipment
loudspeakers and not in the corners of your listening area.
Final High fidelity systems are an investment deserving of careful thought and
Thoughts
personal time. Your preferences, priorities and constraints will dictate the
parameters of your purchase, your ears will tell you what is the right choice for
you. Our experience tells us that the bitterness of dissatisfaction lingers long
after the fragrance of cheap price is forgotten, hence our use of the term –
investment.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Care and Maintenance
The ECD2 has been designed to provide many years of trouble free enjoyment.
Note:
Please switch the unit off and remove the cord-set from the rear of the
amplifier before attempting to clean your ECD2 in the manner described
below.
Never apply liquid directly to the ECD2.
Never use abrasives.
Never rub in a circuilar motion.
Cover The cover features a durable, high quality powder-coat finish. To remove finger
marks and dirt, lightly rub the surface with a soft cloth.
If the dirt is not removed, dip your cloth in a mild solution of soap and water,
squeeze excess moisture from it and then gently reapply to the surface.
Stubborn dirt may be removed by the application of a small quantity of
methylated spirits, applied directly to the cleaning cloth only and reworking the
effected area.
Front Panel Black Powder-coat Finish
The front panel is finished in the same durable powder coat as the cover and can
be cleaned in a similar manner, as described above.
Chrome Finish
To remove finger marks and dirt on chrome finishes, lightly rub the surface with
a soft cloth containing a very small quantity of isopropyl alcohol (methylated
spirits) on it.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Warranty Information
and Obtaining Service
1 Year The Perreaux ECD2 is warranted to be free from defects in material and
Limited workmanship under normal use to the original purchaser for a period of 1-year
Warranty (365) days from the date of purchase from an authorised dealer or distributor.
3 Year To extend the warranty on your Perreaux ECD2 to three (3) years from date of
Extended purchase, please return a fully completed warranty registration form along with a
Warranty copy of the original receipt of purchase to:
Perreaux Industries Ltd
PO Box 47413
Ponsonby
Auckland
New Zealand
For the Extended Warranty Registration Form, please refer to Chapter 11.
Warranty Perreaux Industries Ltd may, at its discretion, allow the warranty on this product
transfer.
Information If during the warranty period the Perreaux ECD2 exhibits defects in materials
on the ECD2
Warranty
and/or workmanship, it will be repaired or replaced, at our option, without
charge for either parts or labour. The warranty does not apply to any unit that
has been misused, abused or altered.
Any unit that is not performing satisfactorily may be returned to the factory in
Auckland, New Zealand for evaluation. Return authorisation must first be
obtained by either calling or writing to Perreaux prior to shipping the unit.
Perreaux Industries Ltd and it’s authorised distributors and dealers shall not be
held liable for any freight or insurance charges. Freight and insurance charges to
and from the Perreaux factory will be the sole responsibility of the owner of the
unit.
There is no other express warranty on the ECD2. Neither this warranty nor any
other warranty, express or implied, including any implied warranties of
merchantability of fitness, shall extend beyond the warranty period. No
responsibility is assumed for any incidental or consequential damages.
Obtaining In the event that you are experiencing difficulty with the ECD2, please as a first
Service step, follow the faultfinding procedures in Chapter 12. If after following this
procedure, you require further assistance, please contact your Perreaux dealer.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Extended Warranty
Registration Form
Please complete this form and either fax, mail or scan and e-mail it to Perreaux
Industries Ltd.
Fax:
+64 9 815 5981
Mail: Perreaux Industries Ltd
PO Box 47 413
Ponsonby
Auckland
New Zealand
E-mail: [email protected]
Alternatively, complete the online Warranty Registration Form on our website
ꢁ
3 Year Extended Warranty Form
Name:
Address:
Suburb:
City:
Country:
Telephone:
E-mail:
Website:
Product Purchased: E - S E R I E S E C D 2
Serial Number:
Dealer:
Purchase Date:
/
/
d
d
m
m
y
y
y
y
21
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Faultfinding Your System
Cause and Hum is a particularly annoying form of noise in any high fidelity system and at
Elimination some time has been experienced by many of us.
of Hum
Hum may result from a number of different situations and to make matters
worse maybe caused by a seemingly illogical combination of circumstances.
One or more of three specific causes creates hum in the system.
Induced Hum
Hum can be induced into the system from one or more sources and is generally
associated with the radiation of noise from one system into another.
Hum and noise can be radiated from any object or system involving AC voltage
and current such as power supplies in amplifiers, motors, switching equipment
etc. All of these may be found in your hi-fi system or within your own home.
Hum may be induced into any part of the system, so there are no specific
instructions that can be given which will offer a guaranteed cure. A good
practice to adopt is to keep low-level signal equipment such as phono systems,
tuners etc. well away from high-level signal equipment such as power
amplifiers. Alternatively, careful designs must be employed to negate these
effects on low-level signal equipment. Another good practice to adopt is to keep
all signal leads away from power leads.
The practice of neatly tying excess leads together for a tidy looking installation
should be resisted, as this could be the cause of induced hum in the system.
Earth Loops
Earth loops are a particularly annoying cause of hum in the system. Earth loops
are created by mains frequency current flowing in the screen of signal leads and
becomes apparent with the lack of adequate earthing between the various pieces
of equipment making up the hi-fi system. This is further compounded by the
fact that the equipment earthing considerations vary between different
manufacturers and countries.
Perreaux products used with equipment manufactured by other manufacturers
may cause an earth loop situation, but Perreaux products used with other
Perreaux products will not cause an earth loop situation provided the following
precautions are observed:
àꢀThe entire hi-fi system must be connected to the same mains/line power
outlet. This will ensure that each piece of the system shares the same earth
or ground. This rule applies to all installations of all brands of equipment.
A preamplifier or power amplifier may be operated from an extension cord
plugged into the same mains/line outlet.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
àꢀWhen a piece of equipment is supplied with a three pin mains/line supply
lead all three pins must be connected in the correct fashion - see your
dealer if in doubt.
àꢀCheck all interconnecting signal leads for good connections, both internal
connections and firm contact with the sockets. While the centre pin may
make firm contact, it is very important that the outer contact is also firm.
àꢀNever remove the earth/ground wire from the mains/line supply of any
piece of equipment. This could be hazardous.
Broken Earth Connections
This is a common cause of hum and noise in the system. In many instances, the
only way to eliminate the possibility of hum problems arising through a broken
earth connection somewhere in the system is to physically check every
connection.
Identifying When experiencing a problem, such as one channel not working, or a noise in
and Isolating one channel, it is good practice to adopt a method of isolating the problem to a
Problems specific item or area. This practice will assist in diagnosing, curing, or at least
advising your technician of the problem and result in a saving of time, money
and perhaps frustration.
A logical approach to isolating the probable cause of the problem is to start at
the loudspeakers and work back to the music source, eliminating each piece of
equipment in turn.
Caution!
Observe precautions regarding volume control settings. Please make all
changes at minimum volume setting. Only increase the volume after the
connections have been made.
Check that the entire system is connected in the proper manner and that the
mains/line supply is connected and switched on.
For clarity during this section, we have labeled one loudspeaker ‘A’ and the
other loudspeaker ‘B’. In this example, loudspeaker ‘A’ appears faulty.
Initial system connections
SOURCE
AMPLIFIER
B
A
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1 – Loudspeakers
SOURCE
AMPLIFIER
B
A
Change the loudspeaker leads from one loudspeaker to the other. If the fault
remains in loudspeaker ‘A’, then loudspeaker ‘A’ is at fault, go no further.
If the fault now appears in loudspeaker ‘B’ then the problem lies further up the
line. Move on to step 2.
Step 2 – Loudspeaker Leads
SOURCE
AMPLIFIER
B
A
Change the loudspeaker leads completely from left channel to right and from
right channel to left by now swapping them at the amplifier output. If the fault
now appears in loudspeaker ‘B’, then that loudspeaker lead is at fault, go no
further.
If the fault appears in loudspeaker ‘A’ then loudspeaker leads are OK. Move on
to step 3.
Caution!
Restore the loudspeaker leads to their original connections at both ends.
Step 3a – Inputs (Channels)
SOURCE
AMPLIFIER
B
A
Change the input plugs on the rear of your amplifier, as follows: Change each
input source in turn by swapping the plugs left to right and right to left. If the
fault changes to loudspeaker ‘B’ on any one of the selected inputs, then that
particular input source is possibly at fault. Move on to step 3b.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
If the fault stays in loudspeaker ‘A’, then it is probable that the fault may exist
within the amplifier.
Caution!
Changing of any connectors must be carried out at a minimum volume
setting. Only increase the volume after the connections have been
changed.
Step 3b – Inputs (Interconnects)
SOURCE
AMPLIFIER
B
A
Change the interconnect leads completely from left channel to right and from
right channel to left by now swapping them at the source component’s output. If
the fault stays in loudspeaker ‘B’, then the interconnect lead is at fault, go no
further.
If the fault appears in loudspeaker ‘A’, then the interconnect lead is OK.
Caution!
Changing of any connectors must be carried out at a minimum volume
setting. Only increase the volume after the connections have been
changed.
Should the fault prove to be in the amplifier it will be necessary to determine
where the fault actually lies. Most of this has been done, for instance, you now
know what input/s and what channel is affected. This information will assist
your Perreaux dealer or service person when or if any service is required.
If the apparent fault is noise in one or both channels and has been localised to
the amplifier, it will be necessary to determine whether or not the noise increases
with the volume control; whether or not the noise exists when no input at all is
connected to the amplifier; and what type of sound the noise is. For example,
low frequency humming noise or high frequency hissing noise.
This
information will also assist your service person in making repairs or
adjustments.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Faultfinding
Flowchart
Fault in
loudspeaker A
Swap loudspeaker
connections
Fault in
loudspeaker
A?
Loudspeaker A
at fault
YES
NO
Swap amplifier
outputs
Fault in
loudspeaker
B?
Loudspeaker
cable at fault
YES
NO
Restore speaker
cables to original
connections
Swap amplifier
source input
channels
Fault in
loudspeaker
A?
Loudspeaker
cable at fault
NO
YES
Swap source
output channels
Fault in
loudspeaker
A?
Input source
at fault
NO
YES
Amplifier
at fault
26
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Specifications
The ECD2 specifications are detailed in brief and then subsequently in more
detail. In the detailed version, we attempt to explain the significance of each
specification.
The correlation between published specifications and sonic quality can be
unreliable. A list of numbers reveals virtually nothing. All technical
measurements must be subject to qualitative as well as quantitative
interpretation. Measurements of the ECD2 reveal excellent results by any
standards. Tested at 115V and 230V after a 10 minute warm up period.
Specifications
In Brief
Audio Section
Analog Output
Rated Output:......................................................................................... 2.0VRMS
Output Impedance:......................................................................................100Ω
Digital Output
Rated Output:........................................................................................... 0.5Vp-p
Load Impedance:...........................................................................................75Ω
Frequency Response:........................................................ 20Hz to 20kHz, ±0.5dB
Total Harmonic Distortion (THD+N)
Rated Output: ............................................................................0.004% @ 1kHz
Signal to Noise Ratio
Rated Output: ..........................................................................................>105dB
Dynamic Range: ...........................................................................................100dB
Channel Separation:........................................................................110dB @ 1kHz
Digital to Analog Converters:............................................................... Dual 20-bit
Digital Filter: ................................................................................8x oversampling
Power Consumption: .......................................................................................20W
Audio Connections
Audio Outputs
Analog: .............................................................................. 1 pair RCA line level
Digital:.........................................................................................75Ω coax RCA
Other Connections
1 x IEC AC mains input receptacle
Mains Input Voltage
100V, 110V, 120V, 220V, 230V or 240V AC at 50Hz or 60Hz
(Set within the ECD2 at time of manufacture)
Dimensions
Width ..............................................................................................425mm (16.7”)
Height .................................................................................................88mm (3.5”)
Depth ..............................................................................................315mm (12.4”)
(not including feet, terminals and handles)
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Fuse Ratings
Mains input fuse
100 – 125V:........................................................................ 2SB slow blow 0.5A
200 – 250V:........................................................................ 2SB slow blow 0.5A
(user serviceable)
Weight
Net: ...................................................................................................7.0kg (15.4lb)
(CD player only)
Gross:..............................................................................................10.0kg (22.0lb)
(CD player, accessories and packing material)
Specifications Analog Rated Output ....................................................................................2.0VRMS
Explained
This is the reference output level to which other specifications, such as signal to
noise ratio and total harmonic distortion, are referred.
Analog Output Impedance..............................................................................100Ω
Output Impedance indicates the ability of the unit to drive the Line Level
Output. The low impedance of the ECD2 means that it will drive any
combination of cable configuration (length, capacitance, etc.) and component
impedance with ease whilst maintaining signal integrity.
Digital Output ................................................................................................... 0.5Vp-p
Indicates the peak-to-peak voltage of the signal from the digital output.
Digital Load Impedance...................................................................................... 75Ω
Specifies the load impedance required for the coaxial digital interconnect.
Frequency Response........................................................ 20Hz to 20kHz, ±0.5dB
Describes the frequency range where the amplitude or strength of the output
signal deviates from the source material by no more than 0.5dB
Total Harmonic Distortion (THD+N) .............................................. 0.004% @ 1kHz
Total Harmonic Distortion + Noise is the percentage of output signal which is
made up of frequencies added due to harmonics of the fundamental frequency
and noise.
Signal to Noise Ratio...................................................................................... >105dB
The ratio of desired signal to noise signals present in the output. This figure is
referenced to the rated output of the CD player, taking into full account all
potentially annoying hum components.
Dynamic Range .............................................................................................. >100dB
The difference between the loudest and quietest portions of a signal. Due to the
increased dynamic range offered by HDCD encoding, this specification must be
greater than the 96dB limit inherent in the standard 16-bit CD format.
Channel Separation.......................................................................... 110dB @ 1kHz
Refers to the immunity of a signal from one channel leaking to the other
channel. The higher the value, the better the isolation of the two channels.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Physical Dimensions
29
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Contact Details
For more information please contact your Perreaux dealer, or contact:
Perreaux Industries Ltd
PO Box 47 413
Ponsonby
Auckland
New Zealand
Ph: +64 9 815-5452
Fax: +64 9 815-5981
E-mail: [email protected]
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Notes
31
Download from Www.Somanuals.com. All Manuals Search And Download.
|