Perlick Washer Dryer 95010REVC User Manual

STACKING KIT INSTALLATION  
Tools Required  
IMPORTANT  
For built-in applications only!  
Ensure the anti-tip brackets are installed  
per the installation and operating  
manual that came with the cabinet.  
Never install if used with caster kits or  
extended leg kits.  
Drill  
Phillips  
Screwdriver  
5/32" Drill Bit  
Parts Required  
MODEL  
HP24 &  
HH24 &  
Part Number  
Description  
HP15  
HP48  
HP72  
HC24  
HA24-18  
63965  
LATCH STRIKE  
15" Grille  
24" Grille  
15" Mounting Plate  
24" Mounting Plate  
2
1
2
2
4
6
65700-2  
65733-4  
68094-15  
68094-24  
1
1
1
2
3
1
68094-24x18 24"x18" Mounting Plate  
1
68094-48  
68094-72  
C31323  
48" Mounting Plate  
72" Mounting Plate  
1
1
12  
Bumper, Adhesive Poly  
4
4
4
4
4
4
8
6
1/4-20 X 1/2" MACHINE  
SCREW  
M00885-189  
M50050-466  
6
5
#10 X 1/2" SHEET METAL  
SCREW  
2
2
2
5
BUMPER, ADHESIVE POLY  
LATCH STRIKE  
1/4-20 X 1/2" MACHINE SCREW  
#10 X 1/2" SHEET METAL SCREW  
Grille  
15" & 24" Mounting Plate  
48" & 72" Mounting Plate  
8300 W. Good Hope Rd. Milwaukee, WI 53223 Phone: (414)353-7060 Fax: (414)-353-7069 perlick.com  
Perlick is comitted to continuous improvement. Therefore, we reserve the right to change specifications without warning  
-1-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
95010 REV C  
STACKING KIT INSTALLATION  
Step 3: Attach mounting plate (where the leg levelers were removed  
in step 2) by using 1/4-20 machine screws . Flange should be  
pointing away from the bottom of the unit.  
Bottom of  
cabinet  
Flange  
Step 4: Place upper unit on top of lower unit and attach using #10  
sheet metal screws (where the rivets were drilled out in step 1).  
7
68 "  
8
NOTE: EXTENSION OF LEG LEVELERS  
WILL INCREASE ASSEMBLY HEIGHT  
8300 W. Good Hope Rd. Milwaukee, WI 53223 Phone: (414)353-7060 Fax: (414)-353-7069 perlick.com  
Perlick is comitted to continuous improvement. Therefore, we reserve the right to change specifications without warning  
-3-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
95010 REV C  
STACKING KIT INSTALLATION  
Step 5: Attach -4- bumpers and -2- latch strikes to each new grille.  
Orient tabs vertically. Attach grille assemby to upper unit.  
Move stacked assembly into final position by pushing lower unit.  
This edge  
vertical.  
Bumper  
Note:When using stacking kit to join -2- HH24  
or HC24-18 units, a wall mount anti-tip kit  
must be installed. See cabinet manual  
for instructions.  
8300 W. Good Hope Rd. Milwaukee, WI 53223 Phone: (414)353-7060 Fax: (414)-353-7069 perlick.com  
Perlick is comitted to continuous improvement. Therefore, we reserve the right to change specifications without warning  
-4-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
95010 REV C  

Peavey Music Mixer IIB User Manual
Pelco Automobile Electronics C2924M 4 05 User Manual
Pentax Digital Camera Optio S5n User Manual
Philips Projection Television 52PFL7432 98 User Manual
Pioneer Car Stereo System XDV P9 User Manual
Polycom IP Phone SIP 302 User Manual
Pontiac Automobile 2000 sunfire User Manual
Poulan Lawn Mower 189956 User Manual
Poulan Lawn Mower XT24H42LT User Manual
Powermate Portable Generator PM0435003 User Manual