Before using GPS
Using the GPS
- In the woods
- Near mobile phones that use the 1.5 GHz band
• When the GPS function is set to on, the camera performs positioning
regularly even if it is turned off. Make sure to set [GPS Setting] to
P (Off) (p.4) before turning off the camera when taking it where using
electronic products is prohibited, such as hospitals or airplanes.
• Positioning may take few minutes when using the GPS function for the
first time, after not positioning for a long while, or after changing the
battery.
About GPS
Recording GPS data onto images
GPS means Global Positioning System. It is a navigation system for
measuring a position by receiving information from GPS satellites. The
camera receives signals from some GPS satellites and calculates its
present position and the time. This is called "positioning".
You can record GPS data (latitude, longitude, altitude, or date etc.) onto
images you take. To record them, set [GPS Setting] to O (On).
Set [GPS Setting] to O (On) before setting [Logging] (p.5) and [Auto
Time Synch.] (p.7) settings.
• The Geodetic system for this camera’s GPS function uses the World
Geodetic System 1984 (WGS 84).
Utilities Guide for GPS
1
Press the 3 button in Q mode.
Function of Optio WG-1 GPS
• The location information on images cannot be erased. Make sure to
set [GPS Setting] to P (Off) before taking pictures if you intend to put
them on the internet without disclosing their location.
• Using GPS is prohibited in some countries or regions. Contact
appropriate embassy or travel agent before travelling with a GPS
camera.
• Do not carry the camera in a metal container if the positioning function
is running. If the camera is covered with metal, the positioning function
cannot work.
• In the following situations, the camera cannot receive GPS data. It
starts positioning again if it is removed from the following situations:
- While recording an image or a movie
- During a slideshow or while playing back a movie
- While doing settings on the camera’s setting menu
- When the alarm is ringing
[WSetting] menu appears.
Location of where an image is taken can be recorded
The latitude and longitude of an image can be recorded. You can see the
positions of pictures you take on a map by using the software provided.
When you press the 3 button in A mode, press the four-way
controller (5) once.
Before using GPS .......................................2
Using the GPS .............................................4
2
3
Use the four-way controller (23) to select [GPS].
Saving log files
The camera receives information from GPS satellites regularly and
saves them as log files in KML format. The log files can be displayed
using Google Earth or Google Maps, or an application that supports KML
format.
Press the four-way controller (5).
[GPS] screen appears.
4
5
Use the four-way controller (23) to select [GPS
Setting].
*Google, Google Earth and Google Maps are trademarks of Google Inc.
Correct the clock using GPS data
The camera corrects its clock automatically using received information
from GPS satellites.
Use the four-way controller
(45) to switch between
O (On) or P (Off).
GPS
GPS Setting
Logging
Off
Off
This manual describes how to use the Optio WG-1 GPS camera’s GPS function
and precautions when using it. Please read this manual before using the GPS
function with this camera.
- When the camera is connected to a computer with a USB cable
- When the camera is connected to AV equipment with an AV or HDMI
cable
Precautions for using GPS
O(On)
Records GPS
Auto Time Synch.
information onto images
Does not record GPS
informationontoimages
• The GPS function is set to off as the default. To use it, set [GPS
Setting] to O (On).
MENU
P (Off)
- For a minute after changing the battery
• GPS satellites always move. Depending on the situation (location,
time etc.), positioning may take longer or be impossible.
• To use the GPS function, you must be in an open area, such as out of
doors.
• Positioning may be difficult or impossible in the following situations:
- Under the water
- Under the ground or indoors
- In tunnels
- Among high-rise buildings
- Under elevated or near high-voltage electrical power lines
6
Press the 3 button twice.
Hereby, HOYA CORPORATION, declares that this GPS Module Circuit
Board/SG561_TB1 is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC.
For a full version of the Declaration of Conformity (DoC), please refer to
The camera returns to A mode or Q mode.
GPS
• Only when
information can be recorded onto images.
is displayed on the capture mode screen, the GPS
• If [GPS Setting] is set to O (On), the camera performs positioning
regularly even if it is turned off, which reduces the battery life.
53209
H01-201102
Printed in Vietnam
The CE Mark is a Directive conformity mark of the European
Union.
㧙 3 㧙
㧙 2 㧙
㧙 4 㧙
• The information saved in logs are latitude, longitude, and altitude.
• The logs cannot be played back on the camera. Transfer the logs to
your computer and use software that supports files in the KML format,
Google Earth or Google Maps, for example.
• When recording GPS information onto a movie, the data at the start of
recording is saved.
2
3
Use the four-way controller (23) to select [GPS].
2
3
Use the four-way controller (23) to select [GPS].
• When dividing a movie, the GPS information before dividing is
displayed.
Press the four-way controller (5).
Press the four-way controller (5).
[GPS] screen appears.
[GPS] screen appears.
• When adding a title image to a movie, the GPS information of the
movie is displayed.
To delete logs
4
Use the four-way controller
(23) to select [Logging].
4
5
Use the four-way controller (23) to select [Auto Time
Synch.].
GPS
• The followings are the intervals at which GPS information is received.
• When [Logging] is set to [Off] and the camera is turned on: 1 minute
• When [Logging] is set to [Off] and the camera is turned off: 15
minutes
GPS Setting
If 999 log files are saved, the camera cannot save them anymore. Insert
a new SD Memory Card or delete logs according to the following
procedures to save new ones.
Logging
Off
Off
Press the four-way controller
(5).
GPS
Auto Time Synch.
GPS Setting
• When setting the interval in [Logging]: Receives the information at
the set interval
MENU
The setting of [World Time] is
displayed.
Logging
Off
Off
1
Turn on the camera.
Auto Time Synch.
[No more logs can be recorded. Delete the record?] message is
displayed.
5
6
Press the four-way controller (5).
To display the GPS data saved on an image
Press the Q button after taking a picture.
MENU
A pull-down menu appears.
2
Use the four-way controller
(23) to select [Delete All].
1
Use the four-way controller
(23) to select the interval for
positioning.
6
Use the four-way controller
(45) to switch between [On]
and [Off].
GPS
Destination
New York
02/02/2011
01:25
TimeDif. -14:00
No more logs
can be recorded.
DST
OFF
The camera enters the
display.
Q
mode and the image appears on the
GPS Setting
Logging
Delete tthe record?
Off
Applies auto time synch.
to current setting
Delete All
Cancel
15sec.
30sec.
1min.
Choose from [Off], [15sec.], [30sec.],
or [1min.]
Auto Time Synch.
2
Press the 4 button until the
GPS information is displayed.
-
100 0038
Off
OK
MENU
OK
OK
MENU
OK
OK
Cancel
Cancel
If the camera did not receive GPS
data when the picture was taken, the
values are displayed as “--“.
3
Press the 4 button.
7
Press the 4 button.
7
Press the 4 button.
All the logs are deleted and the camera returns to capture mode.
02/02/'11 14: 25: 00
GPS
The setting is saved.
Returns to [GPS] screen.
N
35 45' 52"
Edit
W
139 41' 29"
If you select [Cancel], you can continue taking pictures although you
cannot save logs.
• [Logging] can be set only when [GPS Setting] is set to O (On).
8
Press the 3 button twice.
Dateimage Latitudeandlongitude
was taken at which image was
taken
• The logs are saved in the SD Memory Card only.
The camera returns to A mode or
Q
mode.
• Up to 999 log files can be saved or to the capacity of the SD Memory
Card.
If you turn on the camera in the Playback Mode, the camera returns to
Playback Mode after you have deleted logs.
• [Auto Time Synch.] can be set only when [GPS Setting] is set to
O (On).
Saving logs
• A new log file is created in the following situations:
• When the date changes
• [Auto Time Synch.] does not function in the following situations:
Correcting time automatically
The camera receives information from GPS satellites regularly and
saves them as log files. These logs are saved in KML format to the
"GPSLOG" folder in the root directory which is on the removable disk of
the camera.
•
•
•
•
•
During movie recording
During movie play back
When displaying a slide show
During interval shooting
When the timer is set
• When the capacity of a log file is full
• After changing an SD Memory Card
The camera corrects its clock automatically using received GPS
information.
• When changing the display format of the date
• When the battery level icon is red, logging stops.
• When setting the interval in [Logging], the camera performs
positioning regularly even if it is turned off, which reduces the battery
life.
1
Press the 3 button in Q mode.
1
Press the 3 button in Q mode.
[WSetting] menu appears.
[WSetting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
When you press the 3 button in A mode, press the four-way
controller (5) once.
• Before changing the battery, set [Logging] to [Off].
㧙 5 㧙
㧙 6 㧙
㧙 7 㧙
㧙 8 㧙
Download from Www.Somanuals.com. All Manuals Search And Download.
|