Pelco Video Gaming Accessories c06hwc User Manual

®
C06HWC  
Pre-wired Interconnecting  
Cable  
Installation/Operation  
Manual C940M-C (9/95)  
Please thoroughly familiarize yourself with the infor-  
mationinthismanualpriortoinstallationandoperation.  
1.0 SCOPE  
The information within this manual covers the installa-  
tion and operation of the C06HWC pre-wired intercon-  
necting cable.  
2.0 DESCRIPTION  
The C06HWC is a pre-wired 6 foot cable designed for  
use with Pelco hard-wire controls for pan/tilts, scanners  
and motorized lenses. The pre-wired cable is supplied  
with a 14-pin control connector on one end and butt  
splices on the mating end for the pan/tilt or lens, allow-  
ing for a quick and easy field installation. Compatible  
controls are listed below:  
Prior to installation and use of this product, the follow-  
ing WARNINGS should be observed.  
1.  
2.  
Installation and Servicing should only be  
done by Qualified Service Personnel.  
The installation shall be done in accordance  
with all local and national electrical and  
mechanical codes utilizing only approved  
materials.  
*MLZ6DT  
*MLZA6DT  
MPT24DT  
MPTA24DT/220  
MPT24DT/220 MPTA24DT  
MPT115DT  
MPTA220DT  
MPTA115DT MPT220DT  
PT506-24DT PT506-24A  
PT506-24DT/220 PT506-24A/220  
3.  
UnlessthecableisspecificallymarkedWA”  
(for use in wet locations), the cable is de-  
signed for indoor use only and it must not be  
installed where exposed to rain and mois-  
ture.  
* Compatible only when not used with the AI700  
(Auto-iris).  
PELCO • 3500 Pelco Way, Clovis, CA 93612-5699 • (559) 292-1981 • (800) 289-9100  
FAX (800) 289-9150 or (559) 292-3827  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6.0 TROUBLESHOOTING GUIDELINES  
NOTE: If you find the environmental dome  
or pan/tilt has the pan and tilt functions operat-  
ing backwards (e.g., “Tilt Up” actually tilts  
down and “Pan Right” actually pans left), pins  
3 and 7 for pan and pins 5 and 6 for tilt have  
been reversed. The problem can be corrected  
in the field with a CPC pin/socket extracting  
tool by simply exchanging the reversed func-  
tion. If you do not have the necessary tool, con-  
tact Pelco for a R/A number to exchange the  
cable.  
1. If none of the functions in Section 5.1 operate cor-  
rectly, check the connection of the CPC connector  
to the control unit.  
2. If the connection is loose, tighten the lock ring on  
the CPC connector and start the system test proce-  
dure in Section 5.1.  
3. If the connections are tight, check the butt splices  
to determine if the splices were made correctly. If  
the butt splices are correctly made, there may be a  
problem with the control unit, pan/tilt, or lens.  
Pelco’s Technical Assistance Program (TAP)  
should be contacted for further technical trouble-  
shooting aid. To contact the TAP line, call 1-800-  
289-9100.  
7.0 SCHEMATICS  
Figure 1 is a wiring diagram of the pre-wired cable. It  
may be used to troubleshoot wiring problems.  
NOTE: WIRE COLORS FOR PIN 13 REVISED 9/95.  
Figure 1. C06HWC Wiring Diagram  
PELCO Manual C940M-C (9/95)  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
8.0 WARRANTY AND RETURN  
INFORMATION  
WARRANTY  
RETURNS  
Pelco will repair or replace, without charge, any merchandise proved  
defectiveinmaterialorworkmanshipforaperiodofoneyearafterthedate  
of shipment.  
In order to expedite parts returned to the factory for repair or credit, please  
call the factory at (800) 289-9100 or (559) 292-1981 to obtain an  
authorization number (CA number if returned for credit, and RA number  
if returned for repair).  
Exceptions to this warranty are as noted below:  
All merchandise returned for credit may be subject to a 20% restocking  
and refurbishing charge.  
Goods returned for repair or credit should be clearly identified with the  
assigned CA or RA number and freight should be prepaid. Ship to the  
appropriate address below.  
Five years on FT/FR8000 Series fiber optic products.  
Three years on Genex® Series products (multiplexers, server, and  
keyboard).  
Three years on Camclosure® and fixed camera models, except the  
CC3701H-2, CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2,  
and MC3651H-2X camera models, which have a five-year warranty.  
If you are located within the continental U.S., Alaska, Hawaii or Puerto  
Rico, send goods to:  
Service Department  
Pelco  
Two years on standard motorized or fixed focal length lenses.  
Two years on Legacy®, CM6700/CM6800/CM9700 Series matrix, and  
DF5/DF8 Series fixed dome products.  
3500 Pelco Way  
Clovis, CA 93612-5699  
If you are located outside the continental U.S., Alaska, Hawaii or Puerto  
Rico and are instructed to return goods to the USA, you may do one of the  
Two years on Spectra®, Esprit®, ExSite, and PS20 scanners, includ-  
ing when used in continuous motion applications.  
Two years on Esprit® and WW5700 Series window wiper (excluding  
wiper blades).  
following:  
If the goods are to be sent by a COURIER SERVICE, send the goods to:  
Eighteen months on DX Series digital video recorders, NVR300  
Series network video recorders, and EnduraSeries distributed  
network-based video products.  
Pelco  
3500 Pelco Way  
Clovis, CA 93612-5699 USA  
One year (except video heads) on video cassette recorders (VCRs).  
Video heads will be covered for a period of six months.  
If the goods are to be sent by a FREIGHT FORWARDER, send the goods  
to:  
Six months on all pan and tilts, scanners or preset lenses used in  
continuousmotionapplications(thatis,presetscan,tourandautoscan  
modes).  
Pelco c/o Expeditors  
473 Eccles Avenue  
South San Francisco, CA 94080 USA  
Phone: 650-737-1700  
Fax: 650-737-0933  
Pelco will warrant all replacement parts and repairs for 90 days from the  
date of Pelco shipment. All goods requiring warranty repair shall be sent  
freight prepaid to Pelco, Clovis, California. Repairs made necessary by  
reason of misuse, alteration, normal wear, or accident are not covered  
under this warranty.  
Pelco assumes no risk and shall be subject to no liability for damages or  
loss resulting from the specific use or application made of the Products.  
Pelco’s liability for any claim, whether based on breach of contract,  
negligence, infringement of any rights of any party or product liability,  
relating to the Products shall not exceed the price paid by the Dealer to  
Pelco for such Products. In no event will Pelco be liable for any special,  
incidental or consequential damages (including loss of use, loss of profit  
and claims of third parties) however caused, whether by the negligence  
of Pelco or otherwise.  
The above warranty provides the Dealer with specific legal rights. The  
Dealer may also have additional rights, which are subject to variation from  
state to state.  
Ifawarrantyrepairisrequired,theDealermustcontactPelcoat(800) 289-  
9100 or (559) 292-1981 to obtain a Repair Authorization number (RA),  
and provide the following information:  
1. Model and serial number  
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice  
number  
®
3. Details of the defect or problem  
If there is a dispute regarding the warranty of a product which does not fall  
under the warranty conditions stated above, please include a written  
explanation with the product when returned.  
Method of return shipment shall be the same or equal to the method by  
which the item was received by Pelco.  
Pelco  
3500 Pelco Way, Clovis, CA 93612-5699 (559)  
292-1981 • (800) 289-9100  
FAX (800) 289-9150 or (559) 292-3827  
International customers call 1-559-292-1981 or  
FAX 1-559-348-1120  
(Product specifications subject to change  
without notice.)  
Pelco, the Pelco logo, Camclosure, Esprit,  
Genex, Legacy, and Spectra are registered  
trademarks of Pelco.  
Endura and ExSite are trademarks of Pelco.  
C940M-C  
© Copyright 1995, Pelco. All rights reserved.  
4
PELCO Manual C940M-C (9/95)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Philips Breast Pump SCF160 User Manual
Philips Indoor Furnishings 34615 17 16 User Manual
Philips Iron GC1730 User Manual
Philips Stereo System SDV2710 27 User Manual
Philips Work Light Plus Slimline 8 User Manual
Planet Technology Network Router ADE 4120 User Manual
Poulan Tiller 164778 User Manual
Power Acoustik Car Stereo System Pwm 70 User Manual
ProForm Treadmill PFTL790080 User Manual
PSC Scanner 2200VS User Manual