I N S T A L L A T I O N
PMCP-WM60 Monitor
Wall Mount
C2231M (2/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Assembling the Wall Mount Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
C2231M (2/07)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
List of Illustrations
1 Fixed Wall Mount Bracket Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2 Installing Plastic Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3 Attaching Monitor to Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4 PMCP-WM60 Dimension Drawing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4
C2231M (2/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Clean only with dry cloth.
6. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
8. Only use attachments/accessories specified by the manufacturer.
9. Installation should be done only by qualified personnel and conform to all local codes.
10. Unless this unit is specifically marked as NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is designed for indoor use only and it must not
be installed where exposed to rain and moisture.
11. Use only installation methods and materials capable of supporting four times the maximum specified load.
12. Only use replacement parts recommended by Pelco.
13. Do not use attachments, such as mounts, that are not recommended by Pelco. They may be hazardous.
This symbol indicates that dangerous voltage constituting a risk of electric shock is
present within this unit.
CAUTION:
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
This symbol indicates that there are important operating and maintenance instructions
in the literature accompanying this unit.
C2231M (2/07)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Description
Use the PMCP-WM60 mounting bracket for attaching Pelco’s PMCP660 plasma monitor to walls. The PMCP-WM60 is a fixed mount. The PMCP-
WM60 can support a weight up to 330.7 lb (150 kg).
MODEL
PMCP-WM60
Fixed wall mount for PMCP660
PACKAGE CONTENTS
1
2
8
8
4
Main bracket
Connection frame pieces
Plastic hangers
Screws (long)
Screws (short)
12 Washers
2
1
Pins
Installation manual
USER MANUAL
PLASTIC
HANGER (8 EA)
SCREW (8 EA)
SCREW (4 EA)
WASHER (12 EA)
PIN (2 EA)
WALL MOUNT BRACKET
6
C2231M (2/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
ASSEMBLING THE WALL MOUNT BRACKET
The wall mount bracket comes disassembled. Install the four short screws (included) and washers (included) in the direction shown by the arrows
in Figure 1. Then tighten.
WASHER
SCREW
Figure 1. Fixed Wall Mount Bracket Assembly
C2231M (2/07)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SECURING THE MONITOR
1. Attach the mounting bracket to the wall using screws (not included) large enough to support the weight of the mount and monitor and that
are appropriate for the wall material. Ensure the mounting bracket is secured tightly.
WARNING: Dry wall may not be sturdy enough to support the combined weight of the monitor and the mount. Attach the mount to studs,
if possible; if not, attach plywood to the studs and the mount to the plywood. Use enough screws when attaching the mount to ensure the
monitor’s weight is evenly and adequately supported.
2. Refer to Figure 2 for steps 2-5. Remove the two handles from the back of the monitor. Then remove the screws that were beneath the
handles. Reinstall the screws that secured the handles.
3. Remove the bumpers from the back of the monitor. Reinstall the four screws (the bottom two on the left side of the monitor and the bottom
two on the right side of the monitor).
4. Remove the base stand from the bottom of the monitor. You can reinstall the screws or leave them out.
5. Assemble the hangers in the order as shown in Figure 2. Place a washer (included) onto each of the eight screws that came with the
mounting kit. Insert the screws and washers into the eight plastic hangers.
6. Screw the eight plastic hangers into the screw holes in the back of the monitor as shown.
SCREW (8 EA)
WASHER (8 EA)
PLASTIC
HANGER (8 EA)
Figure 2. Installing Plastic Holders
8
C2231M (2/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Refer to Figure 3. Lift the monitor and align the pegs of the eight hangers with the grooves of the mounting bracket, then pull down on the
monitor to secure it to the wall. Check that the plastic hangers are completely secured on both the right and left sides.
WALL
MONITOR
PIN (2 EA)
BRACKET
Figure 3. Attaching Monitor to Wall
8. To prevent the hangers from lifting up and out of the bracket, insert the pins into the holes at the bottom of the mounting bracket. The
direction to insert them is from the outside to the inside of the bracket. Finish by pushing the plastic retaining clip into the corresponding
hole in the bracket. This prevents the pins from backing out, and locks the hangers in place.
C2231M (2/07)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
GENERAL
Maximum Load
Construction
Finish
330.7 lb (150 kg)
Steel
Black powder coating
16.5 lb (7.5 kg)
18 lb (8.1 kg)
Unit Weight
Shipping Weight
29.83 (75.77)
4.84 (12.29)
4.84 (12.29)
20.16 (51.2)
22.39 (56.86)
1.34
(3.4)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS, ALL OTHER ARE INCHES.
Figure 4. PMCP-WM60 Dimension Drawing
10
C2231M (2/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT WARRANTY AND RETURN INFORMATION
WARRANTY
Pelco will repair or replace, without charge, any merchandise proved defective in material or
workmanship for a period of one year after the date of shipment.
If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or
(559) 292-1981 to obtain a Repair Authorization number (RA), and provide the following
information:
Exceptions to this warranty are as noted below:
1. Model and serial number
•
Five years on fiber optic products and TW3000 Series unshielded twisted pair transmission
products.
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number
3. Details of the defect or problem
•
•
•
Three years on Spectra® IV products.
If there is a dispute regarding the warranty of a product which does not fall under the
warranty conditions stated above, please include a written explanation with the product when
returned.
Three years on Genex® Series products (multiplexers, server, and keyboard).
Three years on Camclosure® and fixed camera models, except the CC3701H-2,
CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and MC3651H-2X camera models,
which have a five-year warranty.
Three years on PMCL200/300/400 Series LCD monitors.
Two years on standard motorized or fixed focal length lenses.
Two years on Legacy®, CM6700/CM6800/CM9700 Series matrix, and DF5/DF8 Series fixed
dome products.
Two years on Spectra III™, Esprit®, ExSite®, and PS20 scanners, including when used in
continuous motion applications.
Method of return shipment shall be the same or equal to the method by which the item was
received by Pelco.
•
•
•
RETURNS
In order to expedite parts returned to the factory for repair or credit, please call the factory at
(800) 289-9100 or (559) 292-1981 to obtain an authorization number (CA number if returned for
credit, and RA number if returned for repair).
•
•
•
Two years on Esprit and WW5700 Series window wiper (excluding wiper blades).
All merchandise returned for credit may be subject to a 20% restocking and refurbishing
charge.
Two years (except lamp and color wheel) on Digital Light Processing (DLP®) displays.
The lamp and color wheel will be covered for a period of 90 days. The air filter is not
covered under warranty.
Goods returned for repair or credit should be clearly identified with the assigned CA or RA
number and freight should be prepaid. Ship to the appropriate address below.
•
•
•
Eighteen months on DX Series digital video recorders, NVR300 Series network video
recorders, and Endura™ Series distributed network-based video products.
One year (except video heads) on video cassette recorders (VCRs). Video heads will be
covered for a period of six months.
Six months on all pan and tilts, scanners or preset lenses used in continuous motion
applications (that is, preset scan, tour and auto scan modes).
If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico, send goods to:
Service Department
Pelco
3500 Pelco Way
Clovis, CA 93612-5699
Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco
shipment. All goods requiring warranty repair shall be sent freight prepaid to Pelco, Clovis,
California. Repairs made necessary by reason of misuse, alteration, normal wear, or accident
are not covered under this warranty.
If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico and are instructed
to return goods to the USA, you may do one of the following:
If the goods are to be sent by a COURIER SERVICE, send the goods to:
Pelco
Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from
the specific use or application made of the Products. Pelco’s liability for any claim, whether
based on breach of contract, negligence, infringement of any rights of any party or product lia-
bility, relating to the Products shall not exceed the price paid by the Dealer to Pelco for such
Products. In no event will Pelco be liable for any special, incidental or consequential damages
(including loss of use, loss of profit and claims of third parties) however caused, whether by
the negligence of Pelco or otherwise.
3500 Pelco Way
Clovis, CA 93612-5699 USA
If the goods are to be sent by a FREIGHT FORWARDER, send the goods to:
Pelco c/o Expeditors
473 Eccles Avenue
South San Francisco, CA 94080 USA
Phone: 650-737-1700
Fax: 650-737-0933
The above warranty provides the Dealer with specific legal rights. The Dealer may also have
additional rights, which are subject to variation from state to state.
The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002/95/EC.
REVISION HISTORY
Manual #
Date
Comments
C2231M
2/07
Original version.
Pelco, the Pelco logo, Camclosure, Esprit, ExSite, Genex, Legacy, and Spectra are registered trademarks of Pelco.
Endura, and Spectra III are trademarks of Pelco.
©Copyright 2007, Pelco. All rights reserved.
DLP is a registered trademark of Texas Instruments, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Worldwide Headquarters
3500 Pelco Way
Clovis, California 93612 USA
USA & Canada
Tel: 800/289-9100
Fax: 800/289-9150
International
Tel: 1-559/292-1981
Fax: 1-559/348-1120
ISO9001
Australia Canada Finland France Germany Italy Macau The Netherlands Russia Singapore South Africa Spain
|
|
|
|
|
|
|
|
|
|
|
Sweden United Arab Emirates United Kingdom United States
|
|
|
Download from Www.Somanuals.com. All Manuals Search And Download.
|